6-K

FORM 6K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Report of Foreign Issuer

Pursuant to Rule 13a-16 or 16d-16 of

the Securities Exchange Act of 1934

For the month of September 2010

Commission File Number 001-32345

CARDERO RESOURCE CORP.

(translation of registrant’s name into English)

#1920 - 1188 West Georgia Street

Vancouver, British Columbia V6E 4A2

(Address of principal executive offices)

Indicate by check mark whether the registrant files or will file annual reports under cover Form 20-F or Form 40-F.

Form 20-F

_____

Form 40-F

__X__

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1): _____

Note:

Regulation S-T Rule 101(b)(1) only permits the submission in paper of a Form 6-K  if submitted solely to provide an attached annual report to security holders:

Indicate by check mark if the registrant is submitted the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7):

Note:

Regulation S-T Rule 101(b)(7) only permits the submission in paper of a Form 6-K if submitted to furnish a report on other document that the registrant foreign private issuer must furnish and make public under the laws of the jurisdiction in which the registrant is incorporated, domiciled or legally organized (the registrant’s “home country”), or under the rules of the home country exchange on which the registrant’s securities are traded, as long as the report or other document is not a press release, is not required to be and has not been distributed to the registrant’s security holders, and, if discussing a material event, has already been the subject of a Form 6-K submission or other Commission filing on EDGAR.

Indicate by check mark whether by furnishing the information contained in the Form, the registrant is also thereby furnishing the information to the Commission pursuant to rule 12g3-2(b) under the Securities Exchange Act of 1934.

Yes

_____

No

__X__

If “Yes” is marked, indicate below the file number assigned to the registrant in connection with Rule 12g3-2(b) 82-__________.

Exhibits

1.	Press Release of the Registrant dated, August 31, 2010
2.	Material Change Report of the Registrant dated, September 9, 2010

	SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
	CARDERO RESOURCE CORP.
	/s/ Henk Van Alphen
Date: September 10, 2010	Name: Henk Van Alphen Title: President and CEO
In connection with the Company’s listing on the American Stock Exchange, LLC, the Company prepared its U.S. GAAP Balance Sheet as at July 31, 2004.

EX-1

NR10-10

August 31, 2010

Cardero intersects massive iron – titanium and copper mineralization at TiTac and Longnose projects in Minnesota

Highlights include:

TTC-014:  532.79 metres grading 28.79% Fe₂O_3, 14.85% TiO₂ and 0.23% Cu

including 145.08 metres of 30.35% Fe₂O_3,  20.19% TiO₂ and 0.4% Cu

LNG-001:  81.53 metres grading 43.51% Fe₂O₃ and 20.51% TiO₂

including 55.17 metres of 47.13% Fe₂O₃ and 23.07% TiO₂

Cardero Resource Corp. (“Cardero” or the “Company”) – (TSX: CDU, NYSE-A: CDY, Frankfurt: CR5) is pleased to announce very positive initial drill results from its Ferro-Titanium TiTac and Longnose projects in northern Minnesota, USA.  Initial results indicate the presence of semi-massive to massive iron and titanium oxide and associated copper mineralization over exceptionally broad intervals.  Cardero has been aggresively drilling and evaluating potential resources at TiTac and Longnose - both projects previously having been subject to historical exploration with Longnose, according to BHP Minerals (now BHP Billiton) being “the largest known ilmenite (FeTiO₃) resource in North America.”

The Company has completed a total of 36 diamond drill holes at the projects for a total of 11,506 metres with significant iron-titanium and copper mineralization being intersected in the majority of the holes at both projects.  Phase one drilling has been completed and SRK Consulting of Vancouver, Canada has been retained to prepare an independent NI 43-101 resource estimate upon receipt of all remaining assays.  Mineralization remains open for expansion and, contingent on results, it is anticipated that additional resource definition and expansion drilling will re-commence in late-2010.

Drilling Program

The Company initiated exploration and resource drilling in mid-February 2010, aiming to complete a maiden NI 43-101 compliant resource estimate on both projects.  Drilling in the Spring was hampered by unseasonably warm weather and early ground break-up.  As a result, drilling at the higher priority Longnose was severely curtailed with the drill moving to drier areas of the project.  Consequently, drilling has focussed on the lower priority TiTac project, while drilling at Longnose is now scheduled to recommence in late-2010 once the ground is frozen.

A total of 36 drillholes (including two abandoned) have been completed of which 6 provided an initial test of the Longnose project where the moderately dipping mineralized unit was intersected in all four holes.  The remaining 30 holes focused on the TiTac project.

A total of 17 drillholes were originally planned for TiTac and drilling commenced on TiTac North (total of 8 holes drilled).  Holes 3 to 8 intersected the main intrusion with oxide mineralization ranging from 5% to 60% total oxide mineralization (predominantly ilmenite and magnetite).  Due to spring breakup, additional drilling on TiTac North was deferred until the 2010-2011 winter drilling season.  Six drillholes were originally planned for TiTac South but, due to extensive mineralized oxide intersections, an additional 17 holes were drilled, for a total of 23 holes, on TiTac South.  The additional drillholes were targeted in consultation with resource specialists of SRK Consulting.  Highlights are reported here in Table 1.  Additional results are pending from holes 14 to 19, and the remainder of the holes are currently being sampled on site.

Future Work

Winter drilling, scheduled to commence in late 2010, will focus on completion of resource definition drilling at Longnose and TiTac North.  The program is expected to total 5,000-to-15,000 metres, in addition to the 11,506 metres already completed.  The resource estimate at TiTac South could be completed by the end of 2010.  Additional NI 43-101 compliant resource estimates will then be completed for Longnose and TiTac North as results become available.

Drill Results -- Highlights

Table 1: Drill results from TiTac and Longnose iron-titanium projects in Minnesota

DRILLHOLE		FROM (metres)	TO (metres)	WIDTH (metres)	TiO2 %	Fe2O3 %	Cu %
TTC-003-10 TiTac North	interval	32.31	68.88	36.58	16.77%	45.85%	0.080%
	including	39.93	62.79	22.86	19.01%	50.19%	0.068%
	interval	94.18	103.94	9.76	18.76%	30.93%	0.228%
	interval	142.04	151.18	9.14	15.09%	32.43%	0.212%
	interval	251.76	278.13	26.37	13.81%	30.19%	0.258%
TCC-004-10 TiTac North	interval	72.15	97.84	25.69	15.03%	28.23%	0.227%
	interval	206.35	226.92	20.57	18.26%	43.80%	0.226%
	interval	235.76	253.59	17.83	14.90%	33.46%	0.241%
	interval	259.99	287.12	27.13	17.43%	34.06%	0.230%
TTC-005-10 TiTac North	interval	128.23	140.51	12.28	16.77%	28.76%	0.288%
	interval	207.87	244.75	36.88	16.45%	38.07%	0.260%
	interval	263.96	278.13	14.17	18.00%	32.75%	0.272%
	interval	297.48	469.70	172.22	12.88%	38.48%	0.152%
	including	297.48	393.50	96.02	14.35%	43.06%	0.095%
	including	306.63	358.44	51.82	16.84%	49.59%	0.070%
TTC-009-10 TiTac South	interval	44.35	275.84	231.50	11.44%	28.05%	0.160%
	including	153.16	255.79	102.63	16.44%	32.91%	0.198%
	including	153.16	235.00	81.84	17.72%	34.71%	0.222%
TTC-010-10 TiTac South	interval	282.24	391.97	109.73	13.49%	30.82%	0.159%
	including	335.58	391.97	56.39	15.30%	31.51%	0.222%
	including	366.06	391.97	25.91	19.77%	30.06%	0.319%
TTC-011-10 TiTac South	interval	104.85	168.86	64.01	15.91%	40.03%	0.211%
TTC-012-10 TiTac South	interval	84.12	115.70	31.58	12.85%	25.92%	0.165%
	interval	258.47	363.02	104.55	14.66%	24.75%	0.193%
TTC-013-10 TiTac South	interval	94.49	144.78	50.29	16.30%	28.81%	0.240%
TTC-014-10 TiTac South	interval	33.83	566.62	532.79	14.85%	28.79%	0.203%
	including	151.64	209.09	57.46	16.45%	31.37 %	0.180%
	including	228.60	432.21	203.61	18.76%	29.34%	0.330%
	including	228.60	373.68	145.08	20.19%	30.35%	0.397%
LNG-001-10 Longnose	interval	49.07	88.09	39.01	20.63%	35.78%	0.252%
	interval	99.67	181.20	81.53	20.51%	43.51 %	0.102%
	including	123.44	178.61	55.17	23.07%	47.13%	0.084%
LNG-003-10 Longnose	interval	5.18	73.21	68.03	17.47%	37.80%	0.104%
	including	5.18	42.98	37.80	21.05%	38.79%	0.131%
LNG-004-10 Longnose	interval	1.22	39.93	38.71	17.89%	27.08%	0.069%

Figure 1: Drilling completed on TiTac project – some platforms have multiple drillholes

Project Background

Cardero has acquired and is exploring two iron-titanium projects on the edge of the Duluth Complex in north-eastern Minnesota.

The Longnose Project was first discovered in the 1950’s through aeromagnetic and gravity geophysical surveys, and was first drilled by Bear Creek Mining Company in 1958.  The Partridge River Intrusion (PRI) hosts the Longnose body, which dominantly consists of oxide-bearing peridotite, pyroxenite, and semi-massive and massive iron and titanium oxide.  BHP Minerals previously produced a historic (pre-NI 43-101 standards), “probable reserve” at Longnose, estimating 27.57 million tonnes at 21.3% TiO₂, stating at the time that Longnose is “… the largest know ilmenite resource in North America.”  However, the Company cautions that both the BHP report and the included resource estimate were prepared before the introduction of NI 43-101, and are therefore historical in nature and the Company is not treating such resources as a current resource under NI 43-101.  Investors are further cautioned that a qualified person has not yet completed sufficient work to be able to verify the historical resources, and therefore they should not be relied upon.

The TiTac Project was first drilled by U.S. Steel Corporation after it discovered several magnetic highs in the area.  The TiTac body is hosted by anorthositic and troctolitic rocks of the Anorthositic Series, the Boulder Lake intrusion, and the Western Margin intrusion.  The TiTac body dominantly consists of oxide-bearing pyroxenite and peridotite, and massive and semi-massive Fe and Ti oxide.

Titanium dioxide (TiO₂) is primarily used as a white powder pigment due to its brightness and very high refractive index.  It provides excellent opacity to products such as paints, coatings, plastics, paper, inks, fibres, food and cosmetics. Titanium metal is also used as a light, high-strength and corrosion-resistant material in the fabrication of specialized components in the aeronautical and aerospace industries, and in high-end sporting goods and medical components.

Recent North America contract prices for titanium dioxide have been in the range of US$1.17-1.34/lb.

Qualified Person

EurGeol Keith J. Henderson, P.Geo., Cardero’s Vice-President Exploration and a qualified person as defined by National Instrument 43-101, has supervised the preparation of the scientific and technical information that forms the basis for this news release (other than historical data) and has approved the disclosure herein.  Mr. Henderson is not independent of the Company as he is an officer and a director and holds common shares and incentive stock options.

The analytical results were reviewed by Tansy O’Connor-Parsons, Cardero’s Senior Geochemist.  Cardero on-site personnel rigorously collect and track samples which are then security sealed and shipped to ALS Laboratory Group.  ALS Laboratory Group’s quality system complies with the requirements for the international standards ISO 9001:2000 and ISO 17025:1999.  Analytical accuracy and precision are monitored by the analysis of reagent blanks, reference material and replicate samples.  Quality control is further assured by the use of international and in-house standards.  Certified reference material, blank material, and quarter-core duplicates are inserted at regular intervals into the sample sequence by field personnel prior to shipping in order to independently assess analytical accuracy and precision.  In addition, representative blind duplicate samples are routinel y forwarded an ISO-compliant third party laboratory for additional quality control.

On Behalf of the Board of Directors of

CARDERO RESOURCE CORP.

“Hendrik van Alphen” (signed)

Hendrik van Alphen, President

Contact Information:

Steve Stakiw, Manager – Corporate Communications & Investor Relations

Email:  sstakiw@cardero.com

Phone: 1-888-770-7488 (604) 408-7488 / Fax: (604) 408-7499

ABOUT CARDERO RESOURCE CORP.

Cardero's focus through 2010 is to realise the considerable value it believes is locked in its remaining iron ore assets in the Marcona District of southern Peru, and in Minnesota, USA while continuing to progress its base and precious metal exploration projects in Argentina and Mexico, and aggressively seek out and potentially acquire new advanced stage projects.  The common shares of the Company are currently listed on the Toronto Stock Exchange (symbol CDU), the NYSE-Amex (symbol CDY) and the Frankfurt Stock Exchange (symbol CR5).  For further details on the Company readers are referred to the Company’s web site (www.cardero.com), Canadian regulatory filings on SEDAR at www.sedar.com and United States regulatory filings on EDGAR at www.sec.gov.

Cautionary Note Regarding Forward-Looking Statements

This press release contains forward-looking statements within the meaning of Section 27A of the Securities Act and Section 27E of the Exchange Act.  All statements, other than statements of historical fact, included herein including, without limitation, statements regarding the anticipated content, commencement and cost of exploration programs, anticipated exploration program results, the discovery and delineation of mineral deposits/resources/reserves, the delineation of NI 43-101 compliant estimated resources at TiTac and Longnose, business and financing plans and business trends, are forward-looking statements.  Although the Company believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct.  Forward-looking statements are typically identified by words such as: believe, expect, anticipate, intend, estimate, postulate and similar expres sions, or are those, which, by their nature, refer to future events.  The Company cautions investors that any forward-looking statements by the Company are not guarantees of future results or performance, and that actual results may differ materially from those in forward looking statements as a result of various factors, including, but not limited to, variations in the nature, quality and quantity of any mineral deposits that may be located, variations in the market for, and pricing of, any mineral products the Company may produce or plan to produce, the Company’s inability to obtain any necessary permits, consents or authorizations required for its activities, the Company’s inability to produce minerals from its properties successfully or profitably, to continue its projected growth, to raise the necessary capital or to be fully able to implement its business strategies, and other risks and uncertainties disclosed in the Company’s Annul Information Form filed with certain Canadian Secur ities Commissions and annual report on Form 40-F filed with the United States Securities and Exchange Commission, and other information released by the Company and filed with the appropriate regulatory agencies.  All of the Company’s Canadian public disclosure filings may be accessed via www.sedar.com and its United States public disclosure filings may be accessed via www.sec.gov, and readers are urged to review these materials, including the technical reports filed with respect to the Company’s mineral properties.

This press release is not, and is not to be construed in any way as, an offer to buy or sell securities in the United States.

-30-

EX-2

FORM 51-102F3

MATERIAL CHANGE REPORT

Item 1. Name and Address of Company

CARDERO RESOURCE CORP. (the “Issuer”)

Suite 1901, 1177 West Hastings Street

Vancouver, B.C.

V6E 2K3

Item 2. Date of Material Change

August 31, 2010

Item 3. News Release

The date of the press release issued pursuant to section 7.1 of National Instrument 51-102 with respect to the material change disclosed in this report is August 31, 2010.  The material change report was issued in Vancouver, British Columbia through the facilities of the Toronto Stock Exchange, Marketwire, Canada Stockwatch and Market News Publishing.

Item 4. Summary of Material Change

The Issuer reports drill results from its Ferro-Titanium TiTac and Longnose projects in northern Minnesota, USA.

Item 5. Full Description of Material Change

The Issuer reports positive initial drill results from its Ferro-Titanium TiTac and Longnose projects in northern Minnesota, USA.  Initial results indicate the presence of semi-massive to massive iron and titanium oxide and associated copper mineralization over exceptionally broad intervals.  The Issuer has been aggresively drilling and evaluating potential resources at TiTac and Longnose - both projects previously having been subject to historical exploration with Longnose, according to BHP Minerals (now BHP Billiton) being “the largest known ilmenite (FeTiO₃) resource in North America.”

The Issuer has completed a total of 36 diamond drill holes at the projects for a total of 11,506 metres with significant iron-titanium and copper mineralization being intersected in the majority of the holes at both projects.  Phase one drilling has been completed and SRK Consulting of Vancouver, Canada has been retained to prepare an independent NI 43-101 resource estimate upon receipt of all remaining assays.  Mineralization remains open for expansion and, contingent on results, it is anticipated that additional resource definition and expansion drilling will re-commence in late-2010.

Drilling Program

The Issuer initiated exploration and resource drilling in mid-February 2010, aiming to complete a maiden NI 43-101 compliant resource estimate on both projects.  Drilling in the Spring was hampered by unseasonably warm weather and early ground break-up.  As a result, drilling at the higher priority Longnose was severely curtailed with the drill moving to drier areas of the project.  Consequently, drilling has focussed on the lower priority TiTac project, while drilling at Longnose is now scheduled to recommence in late-2010 once the ground is frozen.

A total of 36 drillholes (including two abandoned) have been completed of which 6 provided an initial test of the Longnose project where the moderately dipping mineralized unit was intersected in all four holes.  The remaining 30 holes focused on the TiTac project.

A total of 17 drillholes were originally planned for TiTac and drilling commenced on TiTac North (total of 8 holes drilled).  Holes 3 to 8 intersected the main intrusion with oxide mineralization ranging from 5% to 60% total oxide mineralization (predominantly ilmenite and magnetite).  Due to spring breakup, additional drilling on TiTac North was deferred until the 2010-2011 winter drilling season.  Six drillholes were originally planned for TiTac South but, due to extensive mineralized oxide intersections, an additional 17 holes were drilled, for a total of 23 holes, on TiTac South.  The additional drillholes were targeted in consultation with resource specialists of SRK Consulting.  Highlights are reported here in Table 1.  Additional results are pending from holes 14 to 19, and the remainder of the holes are currently being sampled on site.

Future Work

Winter drilling, scheduled to commence in late 2010, will focus on completion of resource definition drilling at Longnose and TiTac North.  The program is expected to total 5,000-to-15,000 metres, in addition to the 11,506 metres already completed.  The resource estimate at TiTac South could be completed by the end of 2010.  Additional NI 43-101 compliant resource estimates will then be completed for Longnose and TiTac North as results become available.

Drill Results -- Highlights

Table 1: Drill results from TiTac and Longnose iron-titanium projects in Minnesota

DRILLHOLE		FROM (metres)	TO (metres)	WIDTH (metres)	TiO2 %	Fe2O3 %	Cu %
TTC-003-10 TiTac North	interval	32.31	68.88	36.58	16.77%	45.85%	0.080%
	including	39.93	62.79	22.86	19.01%	50.19%	0.068%
	interval	94.18	103.94	9.76	18.76%	30.93%	0.228%
	interval	142.04	151.18	9.14	15.09%	32.43%	0.212%
	interval	251.76	278.13	26.37	13.81%	30.19%	0.258%
TCC-004-10 TiTac North	interval	72.15	97.84	25.69	15.03%	28.23%	0.227%
	interval	206.35	226.92	20.57	18.26%	43.80%	0.226%
	interval	235.76	253.59	17.83	14.90%	33.46%	0.241%
	interval	259.99	287.12	27.13	17.43%	34.06%	0.230%
TTC-005-10 TiTac North	interval	128.23	140.51	12.28	16.77%	28.76%	0.288%
	interval	207.87	244.75	36.88	16.45%	38.07%	0.260%
	interval	263.96	278.13	14.17	18.00%	32.75%	0.272%
	interval	297.48	469.70	172.22	12.88%	38.48%	0.152%
	including	297.48	393.50	96.02	14.35%	43.06%	0.095%
	including	306.63	358.44	51.82	16.84%	49.59%	0.070%
TTC-009-10 TiTac South	interval	44.35	275.84	231.50	11.44%	28.05%	0.160%
	including	153.16	255.79	102.63	16.44%	32.91%	0.198%
	including	153.16	235.00	81.84	17.72%	34.71%	0.222%
TTC-010-10 TiTac South	interval	282.24	391.97	109.73	13.49%	30.82%	0.159%
	including	335.58	391.97	56.39	15.30%	31.51%	0.222%
	including	366.06	391.97	25.91	19.77%	30.06%	0.319%
TTC-011-10 TiTac South	interval	104.85	168.86	64.01	15.91%	40.03%	0.211%
TTC-012-10 TiTac South	interval	84.12	115.70	31.58	12.85%	25.92%	0.165%
	interval	258.47	363.02	104.55	14.66%	24.75%	0.193%
TTC-013-10 TiTac South	interval	94.49	144.78	50.29	16.30%	28.81%	0.240%
TTC-014-10 TiTac South	interval	33.83	566.62	532.79	14.85%	28.79%	0.203%
	including	151.64	209.09	57.46	16.45%	31.37 %	0.180%
	including	228.60	432.21	203.61	18.76%	29.34%	0.330%
	including	228.60	373.68	145.08	20.19%	30.35%	0.397%
LNG-001-10 Longnose	interval	49.07	88.09	39.01	20.63%	35.78%	0.252%
	interval	99.67	181.20	81.53	20.51%	43.51 %	0.102%
	including	123.44	178.61	55.17	23.07%	47.13%	0.084%
LNG-003-10 Longnose	interval	5.18	73.21	68.03	17.47%	37.80%	0.104%
	including	5.18	42.98	37.80	21.05%	38.79%	0.131%
LNG-004-10 Longnose	interval	1.22	39.93	38.71	17.89%	27.08%	0.069%

Figure 1: Drilling completed on TiTac project – some platforms have multiple drillholes

Project Background

The Issuer has acquired and is exploring two iron-titanium projects on the edge of the Duluth Complex in north-eastern Minnesota.

The Longnose Project was first discovered in the 1950’s through aeromagnetic and gravity geophysical surveys, and was first drilled by Bear Creek Mining Company in 1958.  The Partridge River Intrusion (PRI) hosts the Longnose body, which dominantly consists of oxide-bearing peridotite, pyroxenite, and semi-massive and massive iron and titanium oxide.  BHP Minerals previously produced a historic (pre-NI 43-101 standards), “probable reserve” at Longnose, estimating 27.57 million tonnes at 21.3% TiO₂, stating at the time that Longnose is “… the largest know ilmenite resource in North America.”  However, the Issuer cautions that both the BHP report and the included resource estimate were prepared before the introduction of NI 43-101, and are therefore historical in nature and the Issuer is not treating such resources as a current reso urce under NI 43-101.  Investors are further cautioned that a qualified person has not yet completed sufficient work to be able to verify the historical resources, and therefore they should not be relied upon.

The TiTac Project was first drilled by U.S. Steel Corporation after it discovered several magnetic highs in the area.  The TiTac body is hosted by anorthositic and troctolitic rocks of the Anorthositic Series, the Boulder Lake intrusion, and the Western Margin intrusion.  The TiTac body dominantly consists of oxide-bearing pyroxenite and peridotite, and massive and semi-massive Fe and Ti oxide.

Titanium dioxide (TiO₂) is primarily used as a white powder pigment due to its brightness and very high refractive index.  It provides excellent opacity to products such as paints, coatings, plastics, paper, inks, fibres, food and cosmetics. Titanium metal is also used as a light, high-strength and corrosion-resistant material in the fabrication of specialized components in the aeronautical and aerospace industries, and in high-end sporting goods and medical components.

Recent North America contract prices for titanium dioxide have been in the range of US$1.17-1.34/lb.

Qualified Person

EurGeol Keith J. Henderson, P.Geo., The Issuer’s Vice-President Exploration and a qualified person as defined by National Instrument 43-101, has supervised the preparation of the scientific and technical information that forms the basis for this news release (other than historical data) and has approved the disclosure herein.  Mr. Henderson is not independent of the Issuer as he is an officer and a director and holds common shares and incentive stock options.

The analytical results were reviewed by Tansy O’Connor-Parsons, The Issuer’s Senior Geochemist.  The Issuer on-site personnel rigorously collect and track samples which are then security sealed and shipped to ALS Laboratory Group.  ALS Laboratory Group’s quality system complies with the requirements for the international standards ISO 9001:2000 and ISO 17025:1999.  Analytical accuracy and precision are monitored by the analysis of reagent blanks, reference material and replicate samples.  Quality control is further assured by the use of international and in-house standards.  Certified reference material, blank material, and quarter-core duplicates are inserted at regular intervals into the sample sequence by field personnel prior to shipping in order to independently assess analytical accuracy and precision.  In addition, representative blind dupli cate samples are routinely forwarded an ISO-compliant third party laboratory for additional quality control.

ABOUT CARDERO RESOURCE CORP.

The Issuer's focus through 2010 is to realise the considerable value it believes is locked in its remaining iron ore assets in the Marcona District of southern Peru, and in Minnesota, USA while continuing to progress its base and precious metal exploration projects in Argentina and Mexico, and aggressively seek out and potentially acquire new advanced stage projects.  The common shares of the Issuer are currently listed on the Toronto Stock Exchange (symbol CDU), the NYSE-Amex (symbol CDY) and the Frankfurt Stock Exchange (symbol CR5).  For further details on the Issuer readers are referred to the Issuer’s web site (www.cardero.com), Canadian regulatory filings on SEDAR at www.sedar.com and United States regulatory filings on EDGAR at www.sec.gov.

Cautionary Note Regarding Forward-Looking Statements

This material change report contains forward-looking statements within the meaning of Section 27A of the Securities Act and Section 27E of the Exchange Act.  All statements, other than statements of historical fact, included herein including, without limitation, statements regarding the anticipated content, commencement and cost of exploration programs, anticipated exploration program results, the discovery and delineation of mineral deposits/resources/reserves, the delineation of NI 43-101 compliant estimated resources at TiTac and Longnose, business and financing plans and business trends, are forward-looking statements.  Although the Issuer believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct.  Forward-looking statements are typically identified by words such as: believe, expect, anticipate, intend, estimate, postulate and similar expressions, or are those, which, by their nature, refer to future events.  The Issuer cautions investors that any forward-looking statements by the Issuer are not guarantees of future results or performance, and that actual results may differ materially from those in forward looking statements as a result of various factors, including, but not limited to, variations in the nature, quality and quantity of any mineral deposits that may be located, variations in the market for, and pricing of, any mineral products the Issuer may produce or plan to produce, the Issuer’s inability to obtain any necessary permits, consents or authorizations required for its activities, the Issuer’s inability to produce minerals from its properties successfully or profitably, to continue its projected growth, to raise the necessary capital or to be fully able to implement its business strategies, and other risks and uncertainties disclosed in the Issuer’s Annul Information Form filed with certain Canadian Securities Commissions and annual report on Form 40-F filed with the United States Securities and Exchange Commission, and other information released by the Issuer and filed with the appropriate regulatory agencies.  All of the Issuer’s Canadian public disclosure filings may be accessed via www.sedar.com and its United States public disclosure filings may be accessed via www.sec.gov, and readers are urged to review these materials, including the technical reports filed with respect to the Issuer’s mineral properties.

Item 6. Reliance on subsection 7.1(2) or (3) of National Instrument 51-102

Not applicable

Item 7. Omitted Information

No information has been omitted on the basis that it is confidential.

Item 8. Senior Officer

The following senior officer of the Issuer is knowledgeable about the material change disclosed in this report.

Keith J. Henderson, Vice President-Exploration

Business Telephone No.:  (604) 408-7488 Ext. 229

Item 9. Date of Report

September 9, 2010