10-K 1 0001.txt FORM 10-K =============================================================================== SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K |X| ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the Fiscal Year Ended December 31, 2000 |_| TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the Transition Period From ____ to ____ ------------------- Commission File Number: 0-25642 COMMONWEALTH INDUSTRIES, INC. (Exact name of registrant as specified in its charter) Delaware 13-3245741 (State of incorporation) (I.R.S. Employer Identification No.) 500 West Jefferson Street 19th Floor Louisville, Kentucky 40202-2823 (Address of principal executive office) (Zip Code) Registrant's telephone number, including area code: (502) 589-8100 Securities registered pursuant to Section 12(b) of the Act: None Securities registered pursuant to Section 12(g) of the Act: Common Stock; Stock Purchase Rights Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes |X| No |_| Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. |X| The aggregate market value of the common stock held by non-affiliates of the registrant as of March 2, 2001 was $80,594,000. The number of shares outstanding of the registrant's common stock as of March 2, 2001 was 16,452,268. DOCUMENTS INCORPORATED BY REFERENCE Portions of the annual report to stockholders of Commonwealth Industries, Inc. for the year ended December 31, 2000 are incorporated by reference into Parts I and II and portions of the definitive Proxy Statement dated March 16, 2001 for the 2001 Annual Meeting of Stockholders to be held April 20, 2001 are incorporated by reference into Part III. =============================================================================== COMMONWEALTH INDUSTRIES, INC. FORM 10-K For the Year Ended December 31, 2000 INDEX
PART I Page ---- Item 1. Business................................................................3 Item 2. Properties.............................................................10 Item 3. Legal Proceedings......................................................10 Item 4. Submission of Matters to a Vote of Security Holders....................10 Item E.O. Executive Officers of the Registrant...................................10 PART II Item 5. Market for Registrant's Common Stock and Related Stockholder Matters...12 Item 6. Selected Financial Data................................................13 Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations..............................................13 Item 7A. Quantitative and Qualitative Disclosures About Market Risk.............13 Item 8. Financial Statements and Supplementary Data............................13 Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosures..........................................13 PART III Item 10. Directors and Executive Officers of the Registrant.....................14 Item 11. Executive Compensation.................................................14 Item 12. Security Ownership of Certain Beneficial Owners and Management.........14 Item 13 Certain Relationships and Related Transactions.........................14 PART IV Item 14. Exhibits, Financial Statement Schedule and Reports on Form 8-K.........14 Signatures.............................................................20
PART I Item 1. Business. Commonwealth Industries, Inc. (the "Company") is one of North America's leading manufacturers of aluminum sheet and, through its Alflex Corporation subsidiary ("Alflex"), of electrical flexible conduit and prewired armored cable. The Company's aluminum sheet products are produced using the conventional, direct -chill rolling ingot casting process at the Company's multi-purpose aluminum rolling mill at Lewisport, Kentucky, one of the largest in North America, and by the continuous casting process at its facilities located in Uhrichsville, Ohio, and Carson, California. The Company operates coating lines at the Lewisport mill and at Company facilities in Bedford, Ohio, and Torrance, California. It also operates tube mills in Carson as well as a tube mill opened in Kings Mountain, North Carolina in October 2000. The electrical flexible conduit and prewired armored cable products are manufactured at Alflex facilities in Long Beach, California and Rocky Mount, North Carolina. The aluminum sheet products manufactured by the Company are generally referred to as common alloy products. They are produced in a number of aluminum common alloys with thicknesses (gauge) of 0.008 to 0.250 inches, widths of up to 72 inches, and a variety of physical properties and packaging, in each case to meet customer specifications. These products are sold to distributors and end-users, principally for use in building and construction products such as roofing, siding, windows and gutters; transportation equipment such as truck trailers and bodies and automotive parts; and consumer durables such as cookware, appliances and lawn furniture. The Company also fabricates aluminum sheet into welded tube products for various markets. Substantially all of the Company's aluminum sheet products are produced in response to specific customer orders. Production of aluminum sheet products in 2000 was 943 million pounds or about 87% of capacity. In 2000, the North American market for aluminum sheet products, excluding rigid container sheet, foil and exports, was approximately 4.3 billion pounds. Alflex manufactures metallic (aluminum and steel) and non-metallic (plastic) electrical flexible conduit and prewired armored cable, utilizing aluminum sheet manufactured by the Company. These products provide mechanical protection for electrical wiring installed in buildings in accordance with local building code requirements. Armored cable differs from electrical conduit in that it is pre-wired by Alflex, whereas end-users must pull wire through electrical conduit when conduit is installed. These products are used primarily by electrical contractors in the construction, renovation and remodeling of commercial and industrial facilities and multi-family dwellings. They also are used in the heating, ventilating and air-conditioning ("HVAC"), original equipment manufacturers ("OEM") and Do-It-Yourself ("DIY") markets. The products include preassembled and prepackaged products for commercial and DIY markets and commercial pre-fabricated wiring systems which provide significant savings in labor and installation costs for end-users. Historically, electrical wires were housed in rigid pipes in the walls of buildings. Rigid pipe remains the most widely used means of protecting wiring in commercial and other non-residential construction. Electrical flexible conduit made from steel was introduced in the 1920s. Flexible conduit is significantly easier to install than rigid pipe, resulting in cost savings to the installer. Aluminum flexible conduit, introduced to the market by Alflex, has in recent years become a significant factor due to its ease of installation, lighter weight and ease of cutting compared to steel flexible conduit or rigid pipe. In wet, harsh or corrosive environments, non-metallic or plastic jacketed steel flexible conduit may be used. Armored cable (conduit with pre-installed wire) made of steel or aluminum has captured an increasing share of the market from rigid pipe due to its pre-assembly, ease of installation and overall cost effectiveness. The Company estimates that at December 31, 2000 it had a backlog of firm orders for which product specifications have been defined of 163.8 million pounds of aluminum sheet products with an aggregate sales price of $167.9 million, compared to an estimate of 255.5 million pounds with an aggregate sales price of $275.9 million at December 31, 1999. Backlog is not a significant factor for the Company's electrical products. This drop in backlog reflects customer inventory corrections effected by a slowing North American economy. Aluminum Sheet Products Manufacturing The Company's aluminum sheet manufacturing facilities are comprised of the rolling mills at Lewisport, Kentucky, Uhrichsville, Ohio, and Carson, California, coating facilities at Lewisport, Bedford, Ohio, and Torrance, California, and tube mills at Carson and Kings Mountain, North Carolina. The Lewisport mill uses the conventional, vertical direct-chill, rolling ingot casting process. This process permits the production of traditional aluminum sheet with strength, hardness, formability, finishing and other characteristics preferred for many applications. The flexibility permitted by this multi-purpose rolling mill enables the Company to target higher margin products, manufacture a variety of products with consistent high quality and respond quickly to shifts in market demand. In 2000, the Lewisport mill produced 528 million pounds of aluminum sheet products. At full capacity utilization, unit costs of converting metal to aluminum sheet products at Lewisport are believed to be among the lowest in the industry for plants using the conventional process. The Uhrichsville and Carson mills use low-cost, scrap-based twin-belt mini-mill continuous casting production technology. This process permits the efficient production of aluminum sheet alloys used in building and construction and other applications not requiring the more complex alloys or the physical characteristics better provided by the conventional casting method. The process eliminates several steps associated with conventional casting, thereby reducing manufacturing costs. Capital costs also are significantly lower than for mills using the conventional casting process. In 2000, the Uhrichsville and Carson mills together produced 415 million pounds of aluminum sheet products. Aluminum Supply Most of the aluminum metal used by the Company's rolling mills is purchased, principally from or through aluminum scrap dealers or brokers, in the form of aluminum scrap. The Company believes it is one of the largest users of aluminum scrap other than beverage can scrap in the United States and that the volume of its purchases assists it in obtaining scrap at competitive prices. The Company's remaining requirements are met with purchased primary metal, including metal produced in Russia to specifications that differ from the industry standard for primary aluminum but that is appropriate for the Company's needs. In October 2000, the Company signed a 10-year supply agreement with Glencore Ltd. ("Glencore"), a leading diversified trading and industrial company, for the purchase of primary aluminum. Under the agreement, the Company has committed to purchase a minimum of 1.2 billion pounds of P1020/99.7% aluminum from Glencore over the 10-year term beginning in January 2001. Casting and Rolling At Lewisport, scrap, in some cases after processing in the Company's recycling facilities, and primary aluminum are melted in induction or reverbatory furnaces. Small amounts of copper, magnesium, manganese and other metals are added to produce alloys with the desired hardness, formability and other physical characteristics. The molten aluminum is then poured through a mold surrounded by circulating water, which cools and solidifies into an ingot about 24 inches thick and weighing as much as 40,000 pounds. The cooled ingot is conveyed to the rolling mill area for further processing. The rolling ingots are heated to a malleable state in soaking pits or tunnel furnaces. Then, in the next two stages--hot and cold rolling--the ingot is passed between rolls under pressure, causing it to become thinner and longer. The first rolling stage takes place in a "reversing" mill, so named because the ingot is passed back and forth between the work rolls, reversing itself after each pass. After it passes through the reversing mill the aluminum sheet moves through a continuous multi-stand hot mill, and then is cooled and cold rolled to its final thickness. The Uhrichsville and Carson rolling mills employ a continuous casting process in which molten aluminum is fed into a caster which produces a continuous thin slab that is immediately hot rolled into semi-finished aluminum sheet in a single manufacturing process. The aluminum sheet is then cooled and cold rolled to its final thickness as in the conventional process. The Uhrichsville and Carson mills use twin-belt thin-slab continuous casting, which the Company believes is the most efficient and most productive form of continuous casting. The Company and IMCO Recycling, Inc ("IMCO") are parties to a supply agreement under which IMCO serves as the major supplier of molten recycled aluminum for the Company's Uhrichsville mill. Under the IMCO supply agreement, the Company purchases aluminum scrap and delivers it to IMCO who then processes and converts it into molten metal at its recycling and processing facility located adjacent to the Company's mill. The Company is responsible for the treatment and disposal of the waste generated as a result of IMCO's processing services on behalf of the Company. The IMCO supply agreement expires March 31, 2009. The Company has an option to purchase the IMCO facility and a right of first refusal if IMCO wishes to sell the facility. The Carson rolling mill processes its own scrap to produce molten metal, utilizing current delacquering and melting technology. The Company has paid a one-time license fee for certain technology used in its continuous casting process. The license agreement allows the Company the use of certain inventions, technical discoveries and apparatus of the licensor in the manufacturing process. Finishing and Coating After hot and cold rolling is complete, the aluminum sheet is leveled to ensure required flatness and may be slit into narrower widths, embossed or painted to customers' specifications. The Company is an industry leader in the development and production of superior quality coated aluminum products and operates at Lewisport the largest coating line integrated with a United States rolling mill. Coating lines at the Company's Bedford and Torrance facilities serve the Uhrichsville and Carson rolling mills. In the coating process, aluminum sheet is chemically cleaned, painted and then cured to produce a durable coated surface. Packaging and Shipping Finished products are shipped to customers by truck or rail in coils of various size and weighing up to 30,000 pounds. Electrical Products Alflex fabricates its flexible conduit and armored cable at its Long Beach, California and Rocky Mount, North Carolina facilities. The Rocky Mount facility was completed in 1999 with production starting in the second quarter of 1999. This facility increased Alflex's capacity for cable products by approximately 50%. Alflex purchases its aluminum sheet from the Company. Alflex also uses significant amounts of insulated copper wire and steel in its production process. Alflex fabricates its electrical products by slitting aluminum or steel sheet on specialized narrow-width slitting equipment, after which the sheet is coiled. The coils are then fed through proprietary forming machines to produce the flexible conduit. Until 1998, Alflex followed a process that draws copper rod into wire, coats the wire with plastic insulation and, for certain products, wraps the coated wire with paper or plastic. The protective armoring is then wrapped around the cabled wire. During 1998, the Company executed a strategic alliance with BICCGeneral whereby beginning in the second half of 1999, Alflex ceased drawing wire and coating the wire with plastic insulation, and instead purchases all of its copper wire requirements from BICCGeneral. Alflex uses a specialized co-extrusion process involving both rigid and flexible plastics (PVC) to produce its non-metallic conduit. After production, the conduit and cable products are cut to length and packaged. Alflex designs and builds much of the equipment used to manufacture its products. Alflex has designed its manufacturing processes to allow it to produce a wide range of electrical flexible conduit and prewired armored cable products. The Company believes this manufacturing flexibility has contributed significantly to the growth in this business. Also, since the acquisition of the Alflex business, the Company has increased Alflex's electrical conduit and cable manufacturing capacity. Production volume increased from 519 million feet in 1997 to 580 million feet in 2000, however it decreased in 2000 from the 613 million feet produced in 1999 due to slower economic conditions in North America. Customers and Markets The Company's aluminum sheet products are sold to distributors as well as end-users, principally in the building and construction, transportation and consumer durables markets. The Company ceased manufacturing rigid container sheet ("RCS") for the packaging market during 1999 in order to focus all of the Company's resources on its strategic markets. The following table sets forth for 2000 and 1999 the percentage of aluminum sheet net shipments contributed by each of these classes of customers and the Company's estimate of its share of these markets in North America. % of Net Shipments % Market Share ------------------ -------------- 2000 1999 2000 1999 ---- ---- ---- ---- Building and construction 44 41 36 34 Distribution 34 31 23 22 Transportation 13 13 15 18 Consumer durables and other 9 11 11 12 Rigid container sheet (packaging) - 4 - 1 --- --- 100 100 === === The building and construction sector is the largest end-use market other than the packaging market for common alloy aluminum sheet products. The Company believes it is the largest supplier of common alloy aluminum sheet to distributors. Distributors, in some cases after slitting, punching, leveling or other processing, resell the Company's products into end-use markets, including the building and construction, transportation and consumer durables markets. The Company is one of the largest suppliers of aluminum sheet products to North American manufacturers of transportation equipment, including truck trailers and bodies, recreational vehicles and automobile parts. The largest volume in the category of consumer durables and other markets for the Company is reroll stock sold for further processing and conversion for a variety of markets. Other major end-uses of this product category are cookware, consumer durables, appliances and irrigation pipe. Packaging is the largest single end-use of aluminum sheet, accounting for about one-half of the estimated world-wide market. Much of this product is produced by large, single-purpose rolling mills. As previously mentioned, the Company exited the packaging market during 1999. Market share estimates exclude heat-treated aluminum plate and sheet, which the Company does not produce. The Company estimates that heat-treated products constitute an immaterial portion of the end-use markets served by the Company. Company sales are made to customers located primarily throughout North America. Sales outside North America have not been significant. During 2000, sales to one major customer amounted to approximately 14% of the Company's net sales. No other single customer accounted for more than 10% of the Company's net sales in 2000. Sales of aluminum sheet products are made through the Company's own sales force which is strategically located to provide North American coverage. An integrated computer system provides the Company's employees with on-line access to inventory status, production schedules, shipping information and pricing data to facilitate immediate response to customer inquiries. Many of the Company's aluminum sheet markets are seasonal. Demand in the building and construction and transportation markets is generally lower in the fall and winter seasons than in the spring and summer. Such factors typically result in higher operating income in the spring and summer months. Alflex electrical products are sold primarily through independent sales representatives to electrical distributors. Distributors represented approximately 84% of Alflex net sales in 2000. The remaining sales are made to the do-it-yourself ("DIY"), original equipment manufacturer ("OEM") and heating ventilation and air conditioning ("HVAC") markets. The independent sales representatives do not market Alflex's products exclusively, but they do not sell products that are in direct competition with products manufactured and sold by Alflex. Alflex serves over 6,000 customers. Alflex maintains registered trademarks on certain of its flexible conduit and armored cable systems, including Ultratite, Galflex, the Alflex name and its design, Electrician's Choice, Computer Blue, Duraclad, Armorlite and PowerSnap. While Alflex considers these trademarks to be important to its business, it does not believe it is dependent upon the trademarks for the continuation of its business. Competition The Company competes in the production and sale of common alloy aluminum sheet products with some 20 other aluminum rolling mills in North America and with imported products. Aluminum Company of America ("Alcoa") and Alcan Aluminium Ltd. ("Alcan") have a significantly larger share of the total United States market for aluminum sheet products, including packaging and aluminum foil. However, in the market for common alloy aluminum sheet products other than can sheet and aluminum foil, the market share leaders are Alcoa, Alcan and the Company. The Company competes with other rolled products suppliers on the basis of quality, price, timeliness of delivery and customer service. Aluminum also competes with other materials such as steel, plastic and glass for various applications. Alflex competes with national and regional competitors and imported products, both in the electrical flexible conduit and prewired armored cable industry and in the pipe and wire industry. Competition is principally on the basis of product availability and features, price and customer service. Research and Development The Company conducts research and development activities at its rolling mills as part of its ongoing operations to improve product quality and reduce manufacturing costs. Outside consultants also are utilized. Alflex focuses its research and development activities on the development of new products and the improvement of its conduit and cable manufacturing processes through the development of proprietary manufacturing equipment and the reduction of waste. The estimated amounts spent during 2000, 1999 and 1998 on Company-sponsored research and development activities were $0.9 million, $1.4 million and $0.9 million, respectively. Environmental Matters The Company's operations are subject to increasingly stringent environmental laws and regulations governing air emissions, wastewater discharges, the handling, disposal and remediation of hazardous substances and wastes and employee health and safety. These laws can impose joint and several liability for releases or threatened releases of hazardous substances upon statutorily defined parties, including the Company, regardless of fault or the lawfulness of the original activity or disposal. The Company believes it is currently in material compliance with applicable environmental laws and regulations. Federal and state regulations continue to impose stricter emission requirements on the aluminum industry. While the Company believes that current pollution control measures at the emission sources at its facilities meet current requirements, additional measures at some of the Company's facilities may be required to meet future requirements. The Company has been named as a potentially responsible party at seven federal superfund sites and has completed closure activities at two of the sites for past waste disposal activity associated with closed recycling facilities. At the five other federal superfund sites, the Company is a minor contributor and has satisfied its obligations at four of the sites and expects to resolve its liability at the remaining site for a nominal amount. The Company is also under orders by agencies in two states for environmental remediation at three sites, one of which is currently operating and two of which have been closed. A trust fund exists to fund the activity at one of the sites undergoing closure and was established through contributions from two other parties in exchange for indemnification from further liability. The Company is reimbursed from the trust fund for approved closure and postclosure expenditures incurred at the site. The balance remaining in the trust fund at December 31, 2000 was approximately $0.2 million. In determining the adequacy of the Company's aggregate environmental contingency accrual, the assets of the trust fund were taken into account. Based on currently available information, the Company estimates the range of possible remaining expenditures with respect to the above matters is between $7 million and $14 million. The Company acquired its Lewisport rolling mill and an aluminum smelter at Goldendale, Washington ("Goldendale"), from Lockheed Martin in 1985. In connection with the transaction, Lockheed Martin indemnified the Company against expenses relating to environmental matters arising during the period of Lockheed Martin's ownership of those facilities. Environmental sampling at Lewisport has disclosed the presence of contaminants, including polychlorinated biphenyls (PCBs), in a closed Company landfill. The Company has not yet determined the extent of the contamination or the nature and extent of remedial measures that may be required. Accordingly, the Company cannot at present estimate the cost of any remediation that may be necessary. Management believes the contamination is covered by the Lockheed Martin indemnification, which Lockheed Martin disputes. The aluminum smelter at Goldendale was operated by Lockheed Martin until 1985 and by the Company from 1985 to 1987 when it was sold to Columbia Aluminum Corporation ("Columbia"). Past aluminum smelting activities at Goldendale have resulted in environmental contamination and regulatory involvement. A 1993 Settlement Agreement among the Company, Lockheed Martin and Columbia allocated responsibility for future remediation at 11 sites at the Goldendale smelter. If remediation is required, estimates by outside consultants of the probable aggregate cost to the Company for these sites range from $1.3 million to $7.2 million. The apportionment of responsibility for other sites at Goldendale is left to alternative dispute resolution procedures if and when these locations become the subject of remedial requirements. The Company has been named as a potentially responsible party at three third-party disposal sites relating to Lockheed Martin operations, for which Lockheed Martin has assumed responsibility. The Company's aggregate loss contingency accrual for environmental matters was $9.4 million at December 31, 2000, which covers all environmental loss contingencies that the Company has determined to be probable and reasonably estimable. It is not possible, however, to predict the amount or timing of cost for future environmental matters which may subsequently be determined. Although the outcome of any such matters, to the extent they exceed any applicable accrual, could have a material adverse effect on the Company's consolidated results of operations or cash flows for the applicable period, the Company believes that such outcome will not have a material adverse effect on the Company's consolidated financial condition, results of operations or cash flows. The Company has incurred and will continue to incur capital and operating expenditures for matters relating to environmental control and monitoring. Capital expenditures of the Company for environmental control and monitoring for 2000 and 1999 were $0.9 million and $1.5 million, respectively. All other environmental expenditures of the Company, including remediation expenditures, for 2000, 1999 and 1998 were $2.1 million, $2.3 million, and $1.0 million, respectively. The Company has planned environmental capital expenditures for 2001 and 2002 of $0.8 million and $0.5 million, respectively. Employees At December 31, 2000, the Company employed 1,922 persons, of whom 1,328 were full-time non-salaried employees including 564 at Lewisport represented by the United Steel Workers of America ("USW") and 229 at the Uhrichsville and Bedford facilities represented by the Glass, Molders, Pottery, Plastic & Allied Workers International, AFL-CIO, CLC union ("GMP"). Current collective bargaining agreements with the USW and the GMP expire in July and December 2003, respectively. The Company believes its relationships with its employees are good. The Company provides gain sharing plans for certain of its non-salaried employees. Contributions to the plans are generally based upon a formula which compares actual performance results to targets agreed upon by management and in some cases the bargaining units. In addition, the Company provides defined contribution 401(k) plans for certain non-salaried and salaried employees. Item 2. Properties. The following table sets forth certain information with respect to the Company's principal operating properties. Substantially all of these properties collateralize borrowings under the Company's senior secured bank credit facility. Location Nature Square Feet Status -------- ------ ----------- ------ Louisville, Kentucky Administrative offices 24,000 Leased Lewisport, Kentucky Rolling mill 1,700,000 Owned Uhrichsville, Ohio Rolling mill 285,000 Owned Carson, California Rolling mill and tube mill 103,000 Owned Bedford, Ohio Coating facility and tube mill 164,000 Leased Torrance, California Coating facility 60,000 Leased Kings Mountain, North Tube mill 100,000 Leased Carolina Long Beach, California Alflex administrative offices 154,000 Leased and manufacturing facility Rancho Dominguez, Alflex distribution center 111,000 Leased California Rocky Mount, North Alflex manufacturing facility 105,000 Owned Carolina and distribution center Item 3. Legal Proceedings. The Company is a party to non-environmental legal proceedings and administrative actions all of which are of an ordinary routine nature incidental to the business. In the opinion of management such proceedings and actions should not, individually or in the aggregate, have a material adverse effect on the Company's consolidated financial condition, results of operations or cash flows. Item 4. Submission of Matters to a Vote of Security Holders. No matters were submitted to a vote of security holders during the fourth quarter ended December 31, 2000. Item E.O. Executive Officers of the Registrant. The executive officers of the Company as of March 19, 2001 were: Name Age Position with the Company ---- --- ------------------------- Mark V. Kaminski 45 President, Chief Executive Officer and Director Donald L. Marsh, Jr. 54 Executive Vice President, Chief Financial Officer and Secretary Henry Del Castillo 61 Vice President Finance Gregory P. Givan 48 Vice President and Treasurer Katherine R. Gould 37 Vice President Organizational Development Lenna Ruth Macdonald 38 Vice President, General Counsel and Assistant Secretary John F. Barron 49 Controller and Assistant Secretary Mr. Kaminski joined the Company in 1987 as Marketing Manager. In 1989 he was promoted to Vice President of Operations and in 1991 he became President and Chief Executive Officer. He is a director of the Indiana University Athletics Board and Secat, Inc. Mr. Marsh joined the Company in March 1996. Prior to that time he was Senior Vice President of Castle Energy Corporation. Mr. Del Castillo joined the Company in October 1997 as Alflex Business Unit Controller and was elected to his present position in November 1999. From 1995 to 1997 he was Chief Financial Officer of Wherehouse Entertainment Inc., a retail music and video chain undergoing financial restructuring. From 1981 to 1995 he served in a number of financial management positions, including Chief Financial Officer, at Powerine Oil Company, an independent oil refiner. Mr. Givan joined the Company in July 1997. From 1987 until 1997 he was Second Vice President, Corporate Finance and Director, Corporate Finance and Risk Management and Assistant Treasurer of Providian Corp., a financial services company. Ms. Gould joined the Company in July 1998. From 1996 through 1998 she was Human Resource Manager of Gordonstone Coal Management, a joint venture between ARCO Coal Australia and Mitsui. Prior to 1996 she held operations and human resource management positions with Comalco Limited, an Australia-based aluminum company. Ms. Macdonald joined the Company in August 1999 as Principal Legal Counsel and Assistant Secretary and was elected to her present position in May 2000. From December 1998 to 1999 she served as Real Estate Counsel for Vencor, Inc. From 1993 to 1998 she held in-house counsel positions with Bank One Corporation, including with its subsidiary Banc One New Hampshire Asset Management Corporation as Assistant General Counsel and Litigation Group Leader. Mr. Barron joined the Company in February 1997. From 1986 to 1996 he held the position of Senior Vice President and Assistant Comptroller of Bank One Kentucky, N.A. PART II Item 5. Market for Registrant's Common Equity and Related Stockholder Matters. The Company's Common Stock is traded on the Nasdaq National Market under the symbol CMIN. On March 2, 2001, there were 170 holders of record of the Company's Common Stock. The Company estimates that there were a total of 4,300 stockholders on that date, including beneficial owners. Since becoming publicly owned in March 1995, the Company has paid quarterly cash dividends on its Common Stock of $0.05 per share. The following table sets out the high and low sales prices for the Common Stock for each quarterly period indicated, as quoted in the Nasdaq National Market: 2000 High Low ---- ---- --- First Quarter $13.44 $ 7.50 Second Quarter 9.25 5.31 Third Quarter 7.50 4.38 Fourth Quarter 6.00 3.56 1999 ---- First Quarter $12.63 $ 8.25 Second Quarter 14.75 7.38 Third Quarter 18.38 12.25 Fourth Quarter 14.63 9.63 Item 6. Selected Financial Data. The information captioned "Consolidated Selected Financial Data" included on page 9 of the Company's annual report to stockholders for the year ended December 31, 2000 is incorporated herein by reference. This information sets forth selected consolidated statement of operations, operating and balance sheet data for the years indicated. The financial information is derived from the audited consolidated financial statements of the Company for such years. This information should be read in conjunction with, and is qualified by reference to, the consolidated financial statements of the Company and the notes thereto and "Management's Discussion and Analysis of Financial Condition and Results of Operations" also incorporated herein by reference. Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations. The information captioned "Management's Discussion and Analysis of Financial Condition and Results of Operations" included on pages 10 through 15 of the Company's annual report to stockholders for the year ended December 31, 2000 is incorporated herein by reference. Item 7A. Quantitative and Qualitative Disclosures About Market Risk. The information under the subcaption "Risk Management" included in the information captioned "Management's Discussion and Analysis of Financial Condition and Results of Operations" included on pages 10 through 15 of the Company's annual report to stockholders for the year ended December 31, 2000 is incorporated herein by reference. Item 8. Financial Statements and Supplementary Data. The following consolidated financial statements of the Company and report of independent auditors included on pages 16 through 41 of the Company's annual report to stockholders for the year ended December 31, 2000 are incorporated herein by reference. Consolidated Balance Sheet Consolidated Statement of Income Consolidated Statement of Comprehensive Income Consolidated Statement of Changes in Stockholders' Equity Consolidated Statement of Cash Flows Notes to Consolidated Financial Statements Report of Independent Auditors Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure. None. PART III Item 10. Directors and Executive Officers of the Registrant. The information required by Item 401 (other than paragraph (b) thereof) and Item 405 of Regulation S-K may be found under the caption Board of Directors of the Company's Proxy Statement dated March 16, 2001 for the Annual Meeting of Stockholders to be held on April 20, 2001 (the "Proxy Statement") and is incorporated herein by reference. The information required by Item 401(b) of Regulation S-K may be found under Item E.O. above. Item 11. Executive Compensation. The information required by Item 402 of Regulation S-K may be found under the caption Executive Compensation in the Proxy Statement and is incorporated herein by reference. Item 12. Security Ownership of Certain Beneficial Owners and Management. The information required by Item 403 of Regulation S-K may be found under the caption Beneficial Ownership of Common Stock in the Proxy Statement and is incorporated herein by reference. Item 13. Certain Relationships and Related Transactions. The information required by Item 404 of Regulation S-K may be found under the caption Board of Directors--Compensation and Other Transactions with Directors and under the caption Executive Compensation --Management Development and Compensation Committee Interlocks and Insider Participation in the Proxy Statement and is incorporated herein by reference. PART IV Item 14. Exhibits, Financial Statement Schedules, and Reports on Form 8-K. (a) (1) List of Financial Statements filed The following consolidated financial statements of the Company and report of independent auditors included in the Company's annual report to stockholders for the year ended December 31, 2000 were incorporated by reference in Part II, item 8 of this report: Consolidated Balance Sheet Consolidated Statement of Income Consolidated Statement of Comprehensive Income Consolidated Statement of Changes in Stockholders' Equity Consolidated Statement of Cash Flows Notes to Consolidated Financial Statements Report of Independent Auditors (a) (2) List of Financial Statement Schedules filed The following report of independent accountants and financial statement schedule should be read in conjunction with the Company's consolidated financial statements. Supplemental Schedule II - Valuation and Qualifying Accounts is filed on page 19 of this report. Report of Independent Accountants on the Company's financial statement schedule filed as a part hereof for the years ended December 31, 2000, 1999 and 1998 is filed on page 18 of this report. Financial statement schedules other than listed above have been omitted since they are either not required or not applicable or the information is otherwise included. (b) Reports on Form 8-K. No reports on Form 8-K were filed during the fourth quarter ended December 31, 2000. (c) Exhibits 3.1 Restated Certificate of Incorporation, effective April 18, 1997(incorporated by reference to Exhibit 3.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1997). 3.2 By-laws, dated April 17, 1997 (incorporated by reference to Exhibit 3.2 to the Company's Annual Report on Form 10-K for the year ended December 31,1999). 3.3 Stockholder Protection Rights Agreement, dated as of March 6, 1996, including forms of Rights Certificate, Election to Exercise and Certificate of Designation and Terms of Participating Preferred Stock of the Company (incorporated by reference to Exhibits (1), (2) and (3) to the Company's Registration Statement No. 0-25642 on Form 8-A). 10.1 Executive Incentive Compensation Plan, as amended December 4, 1995(incorporated by reference to Exhibit 10.1 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995). 10.2 Long-term Executive Incentive Compensation Plan (incorporated by reference to Exhibit 10.2 to the Company's Registration Statement No. 33-87294 on Form S-1). 10.3 1999 Executive Incentive Plan (incorporated by reference to Exhibit 10.3 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1999). 10.4 Salaried Employees Pension Plan (incorporated by reference to Exhibit 10.4 to the Company's Registration Statement No. 33-87294 on Form S-1). 10.5 Salaried Employees Performance Sharing Plan (incorporated by reference to Exhibit 10.5 to the Company's Registration Statement No. 33-87294 on Form S-1). 10.6 1995 Stock Incentive Plan, as amended and restated April 23, 1999 (incorporated by reference to Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1999). 10.7 1997 Stock Incentive Plan, as amended and restated April 23, 1999 (incorporated by reference to Exhibit 10.2 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1999). 10.7.1 Amendment, dated December 18, 2000, to 1997 Stock Incentive Plan, as amended and restated April 23, 1999. 10.8 Form of Severance Agreements between the Company and Mark V. Kaminski, Donald L. Marsh, Jr. and John J. Wasz (incorporated by reference to Exhibit 10.7 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995). 10.9 Deferred Compensation Plan (incorporated by reference to Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended June 30, 1996). 10.10 Second Amended and Restated Credit Agreement among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and National Westminster Bank PLC, as agent, dated as of December 19, 1997 (incorporated by reference to Exhibit 10.9 to the Company's Annual Report on Form 10-K for the year ended December 31, 1997). 10.10.1 Amendment No. 1, dated as of December 22, 1998, to Second Amended and Restated Credit Agreement among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and National Westminster Bank PLC, as agent, dated as of December 19, 1997 (incorporated by reference to Exhibit 10.9.1 to the Company's Annual Report on Form 10-K for the year ended December 31, 1998). 10.10.2 Agreement, of Resignation, Appointment and Acceptance, dated as of August 18, 1999 among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, National Westminster Bank, as resigning agent, and Bank One, Indiana, NA, as successor agent (incorporated by reference to Exhibit 10.10.2 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 10.10.3 Joinder Agreement, dated as of October 29, 1999 among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and Bank One, Indiana, NA, as administrative agent (incorporated by reference to Exhibit 10.10.3 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 10.10.4 Joinder Agreement, dated as of December 31, 1999 among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and Bank One, Indiana, NA, as administrative agent (incorporated by reference to Exhibit 10.10.4 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 10.10.5 Joinder Agreement, dated as of December 31, 2000 among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and Bank One, Indiana, NA, as administrative agent. 10.11 Amended and Restated Pledge and Security Agreement entered into by the Company and its subsidiaries, collectively, in favor of National Westminster Bank PLC, as agent, dated November 29, 1996 (incorporated by reference to Exhibit 10.9 to the Company's Annual Report on Form 10-K for the year ended December 31, 1996). 10.12 Amendment No. 1, dated as of December 19, 1997, to the Amended and Restated Pledge and Security Agreement entered into by the Company and its subsidiaries, collectively, in favor of National Westminster Bank PLC, as agent, dated November 29, 1996 (incorporated by reference to Exhibit 10.11 to the Company's Annual Report on Form 10-K for the year ended December 31, 1997. 10.13 Receivables Purchase Agreement among Commonwealth Financing Corp., the Company, Market Street Funding Corporation and PNC Bank, National Association, dated as of September 29, 1997 (incorporated by reference to Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended September 30, 1997). 10.13.1 First Amendment, dated May 12, 1998, to Receivables Purchase Agreement among Commonwealth Financing Corp., the Company, Market Street Funding Corporation and PNC Bank, National Association, dated as of September 29, 1997 (incorporated by reference to Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended September 30, 2000). 10.13.2 Second Amendment, dated September 25, 2000, to Receivables Purchase Agreement among Commonwealth Financing Corp., the Company, Market Street Funding Corporation and PNC Bank, National Association, dated as of September 29, 1997 (incorporated by reference to Exhibit 10.2 to the Company's Quarterly Report on Form 10-Q for the quarter ended September 30, 2000). 10.14 Supply agreement by and among Commonwealth Aluminum Corporation, IMCO Recycling of Ohio Inc. and IMCO Recycling Inc., effective as of April 1, 1999 (incorporated by reference to Exhibit 10.4 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1999). 10.15 Indenture dated as of September 20, 1996 between the Company, the Subsidiary Guarantors named therein and Harris Trust and Savings Bank, Trustee (incorporated by reference to Exhibit 4.2 to the Company's Registration Statement No. 333-13661 on Form S-4). 10.15.1 First Supplemental Indenture, dated as of November 12, 1996, to Indenture dated as of September 20, 1996 (incorporated by reference to Exhibit 10.16 to the Company's Annual Report on Form 10-K for the year ended December 31, 1996). 10.15.2 Second Supplemental Indenture, dated as of October 16, 1998, to Indenture dated as of September 20, 1996 (incorporated by reference to Exhibit 10.20 to the Company's Annual Report on Form 10-K for the year ended December 31, 1998). 10.15.3 Third Supplemental Indenture, dated as of December 31, 1999, to Indenture dated as of September 20, 1996 (incorporated by reference to Exhibit 10.15.3 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 10.15.4 Fourth Supplemental Indenture, dated as of December 31, 2000, to Indenture dated as of September 20, 1996. 13 Portions of the annual report to stockholders for the year ended December 31, 2000 which are expressly incorporated by reference in this filing. 21 Subsidiaries. 23 Consent of PricewaterhouseCoopers LLP. Report of Independent Accountants on Financial Statement Schedule Board of Directors Commonwealth Industries, Inc. Our audits of the consolidated financial statements referred to in our report dated January 23, 2001 appearing in the 2000 Annual Report to Stockholders of Commonwealth Industries, Inc. and subsidiaries (which report and consolidated financial statements are incorporated by reference in this Annual Report on Form 10-K) also included an audit of the consolidated financial statement schedule listed in Item 14 (a) (2) of this Form 10-K. In our opinion, this consolidated financial statement schedule presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. /s/ PricewaterhouseCoopers LLP Louisville, Kentucky January 23, 2001 Supplemental Schedule II Commonwealth Industries, Inc. Valuation and Qualifying Accounts December 31, 2000, 1999 and 1998 (in thousands)
Additions Balance at Charged to Charged to Balance at Beginning Costs and Other End of Description of Period Expenses Accounts Deductions of Period ----------- --------- -------- -------- ---------- --------- Allowance for uncollectible accounts December 31,2000 $1,950 $1,014 $ - $ 34 $2,930 December 31,1999 2,484 591 - 1,125 1,950 December 31,1998 2,348 1,131 - 995 2,484 Allowance for obsolete stores inventory December 31,2000 $1,221 $ - $ - $ 18 $1,203 December 31,1999 1,100 121 - - 1,221 December 31,1998 1,100 - - - 1,100
SIGNATURES Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized on March 23, 2001. COMMONWEALTH INDUSTRIES, INC. By /s/ Mark V. Kaminski --------------------------------------- Mark V. Kaminski, President and Chief Executive Officer Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:
Signature Title Date --------- ----- ---- /s/ Paul E. Lego -------------------------- Paul E. Lego Chairman of the Board March 23, 2001 /s/ Mark V. Kaminski -------------------------- Mark V. Kaminski President, Chief Executive Officer and Director March 23, 2001 (Principal Executive Officer) /s/ Catherine G. Burke -------------------------- Catherine G. Burke Director March 23, 2001 /s/ C. Frederick Fetterolf -------------------------- C. Frederick Fetterolf Director March 23, 2001 /s/ Larry E. Kittelberger -------------------------- Larry E. Kittelberger Director March 23, 2001 /s/ John E. Merow -------------------------- John E. Merow Director March 23, 2001 /s/ Donald L. Marsh, Jr. -------------------------- Donald L. Marsh, Jr. Executive Vice President, Chief Financial March 23, 2001 Officer and Secretary (Principal Financial Officer) /s/ Henry Del Castillo -------------------------- Henry Del Castillo Vice President Finance March 23, 2001 (Principal Accounting Officer) /s/ John F. Barron -------------------------- John F. Barron Controller and Assistant Secretary March 23, 2001
Exhibit Index ------------- Exhibit Number Description ------- ----------- 3.1 Restated Certificate of Incorporation, effective April 18, 1997(incorporated by reference to Exhibit 3.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1997). 3.2 By-laws, dated April 17, 1997 (incorporated by reference to Exhibit 3.2 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 3.3 Stockholder Protection Rights Agreement, dated as of March 6, 1996, including forms of Rights Certificate, Election to Exercise and Certificate of Designation and Terms of Participating Preferred Stock of the Company (incorporated by reference to Exhibits (1), (2) and (3) to the Company's Registration Statement No. 0-25642 on Form 8-A). 10.1 Executive Incentive Compensation Plan, as amended December 4, 1995(incorporated by reference to Exhibit 10.1 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995). 10.2 Long-term Executive Incentive Compensation Plan (incorporated by reference to Exhibit 10.2 to the Company's Registration Statement No. 33-87294 on Form S-1). 10.3 1999 Executive Incentive Plan (incorporated by reference to Exhibit 10.3 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1999). 10.4 Salaried Employees Pension Plan (incorporated by reference to Exhibit 10.4 to the Company's Registration Statement No. 33-87294 on Form S-1). 10.5 Salaried Employees Performance Sharing Plan (incorporated by reference to Exhibit 10.5 to the Company's Registration Statement No. 33-87294 on Form S-1). 10.6 1995 Stock Incentive Plan, as amended and restated April 23, 1999 (incorporated by reference to Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1999). 10.7 1997 Stock Incentive Plan, as amended and restated April 23, 1999 (incorporated by reference to Exhibit 10.2 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1999). 10.7.1 Amendment, dated December 18, 2000, to 1997 Stock Incentive Plan, as amended and restated April 23, 1999. 10.8 Form of Severance Agreements between the Company and Mark V. Kaminski, Donald L. Marsh, Jr. and John J. Wasz (incorporated by reference to Exhibit 10.7 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995). 10.9 Deferred Compensation Plan (incorporated by reference to Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended June 30, 1996). 10.10 Second Amended and Restated Credit Agreement among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and National Westminster Bank PLC, as agent, dated as of December 19, 1997 (incorporated by reference to Exhibit 10.9 to the Company's Annual Report on Form 10-K for the year ended December 31, 1997). 10.10.1 Amendment No. 1, dated as of December 22, 1998, to Second Amended and Restated Credit Agreement among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and National Westminster Bank PLC, as agent, dated as of December 19, 1997 (incorporated by reference to Exhibit 10.9.1 to the Company's Annual Report on Form 10-K for the year ended December 31, 1998). 10.10.2 Agreement, of Resignation, Appointment and Acceptance, dated as of August 18, 1999 among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, National Westminster Bank, as resigning agent, and Bank One, Indiana, NA, as successor agent (incorporated by reference to Exhibit 10.10.2 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 10.10.3 Joinder Agreement, dated as of October 29, 1999 among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and Bank One, Indiana, NA, as administrative agent (incorporated by reference to Exhibit 10.10.3 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 10.10.4 Joinder Agreement, dated as of December 31, 1999 among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and Bank One, Indiana, NA, as administrative agent (incorporated by reference to Exhibit 10.10.4 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 10.10.5 Joinder Agreement, dated as of December 31, 2000 among the Company, subsidiaries of the Company, the several lenders from time to time parties thereto, and Bank One, Indiana, NA, as administrative agent. 10.11 Amended and Restated Pledge and Security Agreement entered into by the Company and its subsidiaries, collectively, in favor of National Westminster Bank PLC, as agent, dated November 29, 1996 (incorporated by reference to Exhibit 10.9 to the Company's Annual Report on Form 10-K for the year ended December 31, 1996). 10.12 Amendment No.1, dated as of December 19, 1997, to the Amended and Restated Pledge and Security Agreement entered into by the Company and its subsidiaries, collectively, in favor of National Westminster Bank PLC, as agent, dated November 29, 1996 (incorporated by reference to Exhibit 10.11 to the Company's Annual Report on Form 10-K for the year ended December 31, 1997). 10.13 Receivables Purchase Agreement among Commonwealth Financing Corp., the Company, Market Street Funding Corporation and PNC Bank, National Association, dated as of September 29, 1997 (incorporated by reference to Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended September 30, 1997). 10.13.1 First Amendment, dated May 12, 1998, to Receivables Purchase Agreement among Commonwealth Financing Corp., the Company, Market Street Funding Corporation and PNC Bank, National Association, dated as of September 29, 1997 (incorporated by reference to Exhibit 10.1 to the Company's Quarterly Report on Form 10-Q for the quarter ended September 30, 2000). 10.13.2 Second Amendment, dated September 25, 2000, to Receivables Purchase Agreement among Commonwealth Financing Corp., the Company, Market Street Funding Corporation and PNC Bank, National Association, dated as of September 29, 1997 (incorporated by reference to Exhibit 10.2 to the Company's Quarterly Report on Form 10-Q for the quarter ended September 30, 2000). 10.14 Supply agreement by and among Commonwealth Aluminum Corporation, IMCO Recycling of Ohio Inc. and IMCO Recycling Inc., effective as of April 1, 1999 (incorporated by reference to Exhibit 10.4 to the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 1999). 10.15 Indenture dated as of September 20, 1996 between the Company, the Subsidiary Guarantors named therein and Harris Trust and Savings Bank, Trustee (incorporated by reference to Exhibit 4.2 to the Company's Registration Statement No. 333-13661 on Form S-4). 10.15.1 First Supplemental Indenture, dated as of November 12, 1996, to Indenture dated as of September 20, 1996 (incorporated by reference to Exhibit 10.16 to the Company's Annual Report on Form 10-K for the year ended December 31, 1996). 10.15.2 Second Supplemental Indenture, dated as of October 16, 1998, to Indenture dated as of September 20, 1996 (incorporated by reference to Exhibit 10.20 to the Company's Annual Report on Form 10-K for the year ended December 31, 1998). 10.15.3 Third Supplemental Indenture, dated as of December 31, 1999, to Indenture dated as of September 20, 1996 (incorporated by reference to Exhibit 10.15.3 to the Company's Annual Report on Form 10-K for the year ended December 31, 1999). 10.15.4 Fourth Supplemental Indenture, dated as of December 31, 2000, to Indenture dated as of September 20, 1996. 13 Portions of the annual report to stockholders for the year ended December 31, 1999 which are expressly incorporated by reference in this filing. 21 Subsidiaries. 23 Consent of PricewaterhouseCoopers LLP.