10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

xAnnual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

for the fiscal year ended December 31, 2013

OR

oTransition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

for the transition period from                      to                     .

Commission file number:  1-13429

Simpson Manufacturing Co., Inc.

(Exact name of registrant as specified in its charter)

Delaware	94-3196943
(State or other jurisdiction of	(I.R.S. Employer
incorporation or organization)	Identification No.)

5956 W. Las Positas Blvd., Pleasanton, CA 94588

(Address of principal executive offices)

Registrant’s telephone number, including area code:  (925) 560-9000

Securities registered pursuant to Section 12(b) of the Act:

Common Stock, par value $0.01	New York Stock Exchange, Inc.
(Title of each class)	(Name of each exchange on which registered)

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes  x  No  o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act. Yes  o  No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes  x  No  o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes  x  No  o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [  ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer  x	Accelerated filer  o
Non-accelerated filer  o (Do not check if a smaller reporting company)	Smaller reporting company  o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes  o  No  x

As of June 30, 2013, there were outstanding 48,569,132 shares of the registrant’s common stock, par value $0.01, which is the only outstanding class of common or voting stock of the registrant. The aggregate market value of the shares of common stock held by nonaffiliates of the registrant (based on the closing price for the common stock on the New York Stock Exchange on June 30, 2013) was approximately $1,200,264,039. As of February 24, 2014, 48,922,339 shares of the registrant’s common stock were outstanding.

Documents Incorporated by Reference

The information called for by Part III is incorporated by reference to the definitive Proxy Statement for the Annual Meeting of Stockholders of the Company to be held April 22, 2014, which will be filed with the Securities and Exchange Commission not later than 120 days after December 31, 2013.

This document contains forward-looking statements, based on numerous assumptions and subject to risks and uncertainties, such as statements regarding sales, gross profit margin, stock-based compensation, capital expenditures, amortization or effective tax rates at any future time or for any future period. Although the Company believes that the forward-looking statements are reasonable, it does not and cannot give any assurance that its beliefs and expectations will prove to be correct. Many factors could significantly affect the Company’s operations and cause the Company’s actual results to be substantially different from the Company’s expectations. Those factors include, but are not limited to: (i) general economic and construction business conditions; (ii) customer acceptance of the Company’s products; (iii) relationships with key customers; (iv) materials and manufacturing costs; (v) the financial condition of customers, competitors and suppliers; (vi) technological developments; (vii) increased competition; (viii) changes in capital and credit markets; (ix) governmental and business conditions in countries where the Company’s products are manufactured and sold; (x) changes in trade regulations; (xi) the effect of acquisition activity; (xii) changes in the Company’s plans, strategies, objectives, expectations or intentions; and (xiii) other risks and uncertainties indicated from time to time in the Company’s filings with the Securities and Exchange Commission. Actual results might differ materially from results suggested by any forward-looking statements in this report. The Company does not have an obligation to publicly update any forward-looking statements, whether as a result of the receipt of new information, the occurrence of future events or otherwise. See “Item 1A — Risk Factors.”

PART I

Item 1. Business.

Background

Simpson Manufacturing Co., Inc., a Delaware corporation, (the “Company”), through its subsidiary, Simpson Strong-Tie Company Inc. (“Simpson Strong-Tie” or “SST”), designs, engineers and is a leading manufacturer of wood construction products, including connectors, truss plates, fastening systems, fasteners and pre-fabricated shearwalls, and concrete construction products used for concrete, masonry and steel, including adhesives, chemicals, mechanical anchors, carbide drill bits, powder actuated tools and fiber reinforcing materials. SST markets its products to the residential construction, light industrial and commercial construction, remodeling and do-it-yourself (“DIY”) markets. The Company believes that SST benefits from strong brand name recognition among architects and engineers who frequently specify in building plans the use of SST products. SST has continuously manufactured structural connectors since 1956.

The Company is organized into three operating segments consisting of the North America, Europe and Asia/Pacific segments. The North America segment includes operations primarily in the United States and Canada. The Europe segment includes operations primarily in France, the United Kingdom, Germany, Denmark, Ireland, Switzerland, Portugal and Poland. The Asia/Pacific segment includes operations primarily in China, Hong Kong, Thailand, Australia, New Zealand, South Africa and the Middle East. These segments are similar in several ways, including similarities in the products manufactured and distributed, the types of materials used, the production processes, the distribution channels and the product applications. See Note 14 to the Company’s Consolidated Financial Statements for information regarding the assets and performance of each of the Company’s operating segments. Also see “Item 1A — Risk Factors.”

Simpson Strong-Tie’s wood construction products are typically made of steel and are used primarily to strengthen, support and connect wood joints in residential and commercial construction and DIY projects. SST’s wood construction products enhance the safety and durability of the structures in which they are installed and can save time and labor costs. SST’s wood construction products contribute to structural integrity and resistance to seismic, wind and other forces. Applications range from commercial and residential building, to deck construction, to DIY projects. SST produces and markets over 13,000 standard and custom wood construction products.

Simpson Strong-Tie’s concrete construction products are composed of various materials including steel, chemicals and carbon fiber. They are used to strengthen, support repair and connect joints in residential and commercial construction and DIY projects used to repair, protect and strengthen concrete, brick or mortar structures. SST’s concrete construction products enhance the safety and durability of the structures in which they are installed, can save time and labor costs, and contribute to structural integrity and resistance to seismic, wind and other forces. Applications range from industrial, commercial, infrastructure and residential structures, to DIY projects. SST produces and markets over 2,000 standard and custom concrete construction products.

2

Simpson Strong-Tie emphasizes continuous new product development and often obtains patent protection for its new products. SST’s products are marketed in all 50 states of the United States and in Europe, Canada, Asia, Australia, New Zealand, Mexico and several countries in Central and South America, Africa and the Middle East. SST’s products are distributed to home centers, through wholesale distributors, to contractors, to dealers and to original equipment manufacturers (“OEMs”). SST operates manufacturing, warehouse sales and sourcing or quality assurance facilities in California, Arizona, Texas, Ohio, Florida, Connecticut, Illinois, Washington, Tennessee, Minnesota, North Carolina, Maryland, Massachusetts, Missouri, British Columbia, Ontario, England, France, Denmark, Germany, Scotland, Poland, Czech Republic, Switzerland, Portugal, The Netherlands, Austria, Hong Kong, Australia, Dubai, China, Taiwan, Thailand, New Zealand, Vietnam, South Africa and Chile.

Simpson Strong-Tie has developed and uses automated manufacturing processes. Its innovative manufacturing systems and techniques have allowed it to control manufacturing costs, while developing both new products and products that meet customized requirements and specifications. SST’s development of specialized manufacturing processes has also permitted increased operating flexibility and enhanced product design innovation. The Company has 22 manufacturing locations in the United States, Canada, France, Denmark, Germany, Switzerland, Poland, Portugal, China and England

Industry and Market Trends

Based on trade periodicals, participation in trade and professional associations and communications with governmental and quasi-governmental organizations and with customers and suppliers, Simpson Strong-Tie believes that a variety of events and trends have resulted in significant developments in the markets that SST serves. SST’s products are designed to respond to increasing demand resulting from these trends. Some of these events and trends are discussed below.

In the United States, the market has been increasingly influenced both by growing awareness that the devastation caused by seismic, wind and other disasters can be reduced through improved building codes and construction practices. In addition, environmental concerns contribute to the increasing cost and reduced availability of wood, which has led to an increase in use of engineered wood products, concrete, brick and mortar and other alternatives such as cold-formed steel. Most SST products are listed by recognized building standards agencies as complying with model building codes and are specified by architects and engineers for use in projects they are designing or supervising. The engineered wood products industry continues to develop in response to concerns about the availability of wood, and the Company believes that SST is the leading supplier of connectors for use with engineered wood products.

Natural disasters throughout the world have focused attention on safety concerns relating to the structural integrity of homes and other buildings. The 2011 earthquake in Fukushima, Japan, and the resulting tsunami, the 2011 earthquake in Christchurch, New Zealand, the 2010 earthquakes off the of coast of Chile and in Haiti, the 1995 earthquake in Kobe, Japan, the 1994 earthquake in Northridge, California, the 1989 Loma Prieta earthquake in Northern California, hurricanes Hugo in 1989 and Andrew in 1992, a series of hurricanes in 2004 and 2005, including Katrina, in the southeastern United States, the 2011 Joplin, Missouri, tornado, Hurricane Sandy in the Northeast in 2012 and other cataclysmic natural disasters damaged and destroyed innumerable homes and other buildings, resulting in heightened consciousness of the fragility of some of those structures.

In the face of such disasters in recent years, architects, engineers, model code agencies, contractors, building inspectors and legislators have continued efforts to improve structural integrity and safety of homes and other buildings. Based on ongoing participation in trade and professional associations and communications with governmental and quasi-governmental regulatory agencies, SST believes that building codes are being more uniformly applied and their enforcement is becoming more rigorous.

Recently, there has been consolidation among several of Simpson Strong-Tie’s customer groups. The industry has experienced increased complexity in some home design, and builders are more aggressively trying to reduce their costs. SST has responded to these trends by marketing its products as systems, in addition to individual parts. In some cases, SST uses sophisticated design and specification software to facilitate systems marketing.

The requirements of the Endangered Species Act, the Federal Lands Policy Management Act and the National Forest Management Act have reduced the amount of timber available for harvest from public lands. Over the past several years, this and other factors have led to the increased use of engineered wood products. Engineered wood products, which substitute for strong, clear-grained lumber historically obtained from logging older, large-diameter trees, have been developed to conserve lumber. Engineered wood products frequently require specialized connectors

3

and fasteners. Sales of SST’s engineered wood connector and fastener products have contributed significant revenues over the past several years.

Simpson Strong-Tie continues to support its distribution through home centers throughout the United States. SST’s sales to home centers declined in 2013 and 2012 but increased in 2011. See “Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Simpson Strong-Tie’s principal markets are in the building construction industry. That industry is subject to significant volatility due to real estate market cycles, fluctuations in interest rates, the availability, or lack thereof, of credit to builders, developers and consumers, inflation rates, weather, and other factors and trends. The world-wide recession and the decline in residential construction that began in 2007 reduced the demand for SST’s products. In recent years, there have been indications of an economic recovery with a corresponding increase in residential construction. See “Item 1A — Risk Factors.”

Business Strategy

Simpson Strong-Tie designs, manufactures and sells products that are of high quality and performance, easy to use and cost-effective for customers. SST provides rapid delivery of its products and prompt engineering and sales support. SST intends to continue efforts to increase market share in both the wood construction and concrete construction product groups by maintaining frequent contact with customers, as well as private organizations that provide information to building code officials, both to inform them regarding the quality, proper installation, capabilities and value of SST’s products and to update them about product modifications and new products that may be useful or necessary. To attract new customers, SST also intends to continue to sponsor seminars to inform architects, engineers, contractors and building officials on appropriate use, proper installation and identification of SST’s products and to continue to invest in mobile and web applications for customers, utilizing social media, blog posts and videos to connect and engage with customers and to help them do their jobs more efficiently.

Through acquisitions and product development, using industry knowledge and customer information, Simpson Strong-Tie continues to diversify its product offering to be less dependent on residential housing regardless, of market ups and downs. Based on its communications with customers, engineers, architects, contractors and other industry participants, SST believes it has strong brand-name recognition, which will assist in the acceptance of new products in current and new markets, both domestic and international.

Simpson Strong-Tie seeks to expand its product and distribution coverage through several channels:

Distributors. Simpson Strong-Tie regularly evaluates its distribution coverage and service levels provided by its distributors and from time to time modifies its distribution strategy and implements changes to address weaknesses and opportunities. SST has various programs to evaluate distributor product mix and conducts promotions to encourage distributors to add SST products that complement the mix of product offerings in their markets.

Through its efforts to increase specifications by architects and engineers, and through increasing the number of products sold to particular contractors, Simpson Strong-Tie seeks to increase sales to channels that serve building contractors. SST continuously seeks to expand the number of contractors served by each distributor through such sales efforts as demonstrations of product cost-effectiveness and information programs.

Home Centers. Simpson Strong-Tie intends to increase penetration of the DIY markets by soliciting home centers and increasing product offerings. SST’s sales force maintains on-going contact with home centers to work with them in a broad range of areas including inventory levels, retail display maintenance, and product knowledge training. To satisfy specialized requirements of the home center market, SST has developed extensive bar coding and merchandising aids and has devoted a portion of its research efforts to the development of DIY products.

Dealers. In some markets, Simpson Strong-Tie sells its products directly to lumber dealers and cooperatives.

OEM Relationships. Simpson Strong-Tie works closely with manufacturers of engineered wood products and OEMs in developing and expanding the application and sales of its engineered wood connector and fastener products. SST has relationships with several of the largest manufacturers of engineered wood products.

While Simpson Strong-Tie is expanding its established facilities outside of the United States to increase its presence and sales in these markets, sales of some products may relate primarily to certain regions. For example, sales of

4

SST’s line of shearwalls are concentrated mostly in the western region of the United States, because their use is primarily intended to resist the effects of seismic forces. Since 1993, SST —

·has established operations in the United Kingdom,

·opened manufacturing, warehouse and distribution facilities in western Canada, and the Midwest, Northeast, and eastern seaboard regions of the United States,

·purchased anchor products manufacturers in Illinois, eastern Canada and France and connector product manufacturers in France, Denmark, Germany and Canada,

·acquired the assets of a leading manufacturer and distributor of screw fastening systems and collated screws with manufacturing and distribution operations in Tennessee and distribution in Canada, Europe, Australia and New Zealand, and acquired a manufacturer in Germany,

·acquired a manufacturer and distributor of stainless steel fasteners in Maryland, and consolidated its operations into the Company’s Tennessee facility,

·built a manufacturing facility in China and opened sales offices in Hong Kong, Beijing, Shanghai and Dubai for distribution in Asia and the Middle East,

·acquired a software company that licenses deck design and estimation software,

·acquired software assets used by the Company’s customers in designing and engineering residential structures,

·acquired a manufacturer of truss plates in North Carolina,

·acquired a Maryland manufacturer of construction products and systems to repair, protect and strengthen concrete,

·acquired a manufacturer of engineered materials for repair, strengthening and restoration of concrete, asphalt and masonry construction with manufacturing and sales offices in Switzerland, Poland and Portugal and sales offices in Austria, Germany and The Netherlands, and

·acquired manufacturing assets used by the Company to produce shear walls.

Simpson Strong-Tie’s European investments have established a presence in the European Community acquisition of through companies with existing customer bases and through servicing United States-based customers operating in Europe. SST also distributes connector, anchor and epoxy products in Mexico, Chile, Australia, New Zealand, Asia, South Africa and the Middle East. SST intends to continue to pursue and expand operations both inside and outside of the United States (see Note 14 to the Company’s Consolidated Financial Statements).

A Simpson Strong-Tie goal is to manufacture and warehouse its products in geographic proximity to its markets to provide availability and rapid delivery of products to customers and prompt response to customer requests for specially designed products and services. With respect to the DIY and dealer markets, SST’s strategy is to keep the customer’s retail stores continuously stocked with adequate supplies of the full line of SST’s products that those stores carry. In some cases, SST manages its inventory to help assure continuous product availability. Most customer orders are filled within a few days. High levels of manufacturing automation and flexibility allow SST to maintain its quality standards while continuing to provide prompt delivery.

The Company’s long-term strategy is to develop, acquire or invest in product lines or businesses that have the potential to increase the Company’s earnings per share over time and that—

·complement SST’s existing product lines,

·can be marketed through SST’s existing distribution channels,

·might benefit from use of SST’s brand names and expertise,

·are responsive to needs of SST’s customers,

·expand SST’s markets geographically and

·reduce SST’s dependence on the United States residential construction market.

Products

Simpson Strong-Tie manufactures and markets building products and is a recognized brand name in residential and commercial applications. The product lines historically have encompassed connectors, anchors, fasteners and lateral resistive systems. More recently, Simpson Strong-Tie has entered into the truss plate market and acquired product lines for the marine, industrial and transportation markets.

The wood construction products includes connectors, truss plates, fastening systems and shearwalls. Connectors are prefabricated metal products that attach wood, concrete, masonry or steel together. The metal connectors for wood can join solid sawn lumber, glue-laminated beams, engineered wood, structural composite lumber and plated trusses. Specialty structural connectors have also been developed for cold-formed steel construction. Connectors are

5

essential for tying construction elements together and create safer and stronger buildings. Integrated Component Systems is the name of Simpson Strong-Tie’s full line of truss connector plates and software. Truss plates are toothed metal plates that join wood trusses together. SST is developing for customers sophisticated software analysis to model and design the trusses and to select appropriate truss plates for component manufacturers. The fastener line includes coated or stainless steel hand drive nails and screws in addition to stainless collated nails and staples. SST also offers a line of proprietary structural screws used to join plies of wood together or metal connectors to wood. Complimenting these products is the Quik Drive auto-feed screw driving system used in numerous applications such as decking, subfloors, drywall and roofing. SST’s lateral resistive systems are assemblies used to resist earthquake or wind forces and include Strong-Wall Shearwalls, Anchor Tiedown Systems (“ATS”), Uplift Restraint Systems (“URS”), and Ordinary and Special steel moment frames.

Simpson Strong-Tie’s concrete construction products are used for concrete, masonry and steel and include adhesives, chemicals, mechanical anchors, carbide drill bits, powder actuated tools and fiber reinforcing materials. SST’s anchor products include adhesives, mechanical anchors, carbide drill bits and powder-actuated pins and tools used for numerous applications of anchoring or attaching elements onto concrete, brick, masonry and steel. With recent acquisitions, SST now offers products for the repair, strengthening and protection of concrete, steel or wood structures or infrastructure elements including grouts, coatings, sealers, mortars, fiberglass systems, fiber-reinforced polymers and asphalt products. These products are sold in all segments of the Company.

Most Simpson Strong-Tie products are approved by building code evaluation agencies. To achieve such approvals, SST conducts extensive product testing, which is witnessed and certified by independent testing laboratories. The tests also provide the basis of load ratings for the SST structural products. This test and load information is used by architects, engineers, contractors, building officials and homeowners and is useful across all applications of SST’s products, ranging from the deck constructed by a homeowner to a multi-story structure designed by an architect or engineer.

New Product and Software Development

Simpson Strong-Tie commits substantial resources to new product development. The majority of SST’s products have been developed through its internal research and development program. SST’s research and development expense for the three years ended December 31, 2013, 2012 and 2011, was $10.7 million, $11.5 million, and $6.1 million, respectively. SST believes it is the only United States manufacturer with the capability to test multi-story wall systems, thus enabling testing rather than calculations alone to prove system performance. SST engineering, sales, product management, and marketing teams work together with architects, engineers, building inspectors, code officials and customers in the new product development process.

Simpson Strong-Tie’s product research and development is based largely on needs that customers communicate to SST and on SST’s strategic initiatives to develop new markets or product lines. SST’s strategy is to develop new products on a proprietary basis, to patent them when appropriate and to rely on trade secret protection for others. SST typically develops 10 to 20 new products each year.

Simpson Strong-Tie has expanded its wood construction product offering for 2014 by adding new post base support connectors that resist roof loads before the concrete slab is poured and provide full structural support after the slab is poured joist hangers that can be installed onto a wood beam or stud wall, connectors for large beam applications, and newly developed deck and dock connectors. In addition, the Company has updated and improved its Rigid Tie™ connectors used by DIY homeowners for shelving, work bench and general home projects to be more cost effective and faster to install while maintaining needed load capacity. The Strong-Rod Systems offering of aluminum shrinkage compensation devices was expanded to include devices with greater capacities and versatility to address engineering needs that require economical solutions. The Company launched its Deck Composite Self Drilling line of screws that attaches both wood and composite decking to steel framing members quickly and easily with our SST’s Quik Drive® installation system, as well as a Deck Screw Variable-threads decking screw that is easier to install and requires less torque, which allows more screw installations on a single battery-charged cordless tool than typical deck screws offer. SST also has developed new cold-formed Steel connectors and clips for use in walls, floors and roof applications.

Simpson Strong-Tie expanded its concrete construction product offering for 2014 by adding a range of improved washer and collated pins with lower installation costs for the powder-actuated installation line. The Company launched a new injection epoxy, which has a very low viscosity that can be applied to cracks from hairline in size to a quarter-inch, and launched new anchoring adhesive products for use in uncracked concrete, masonry and unreinforced masonry. The Company’s Europe segment plans to expand its line of fiber reinforced polymer products

6

with the release of the ARMO System, which consists of a specialized carbon-glass-based mesh with a silica coating, and a specialized mortar with a reactive component, that when combined bonds and creates a surface that adds compression strength, which can handle weight loads and withstand fire and is used primarily in restoration of concrete structures.

Simpson Strong-Tie redesigned several existing wood and concrete construction products to increase load capacity and reduce installation costs. SST intends to continue to expand its product offering for multi-family homes and light commercial and manufacturing buildings.

Sales and Marketing

Simpson Strong-Tie’s sales and marketing programs are implemented through its branch system. SST currently maintains branches in Northern and Southern California, Texas, Ohio, Canada, England, France, Germany, Denmark, Switzerland, Poland, Czech Republic, Portugal, Austria, The Netherlands, China, Australia, Hong Kong, Dubai, New Zealand, Thailand, South Africa and Chile. Each branch is served by its own sales force, warehouse and office facilities, while some branches have their own manufacturing facilities. Each branch is responsible for setting and executing sales and marketing strategies that are consistent both with the markets in the geographic area that the branch serves and with the goals of SST. The North America branches closely integrate their manufacturing activities to enhance product availability. Branch sales forces in North America are supported by marketing managers in the home office in Pleasanton, California. The home office also coordinates issues affecting customers that operate in multiple regions. The sales force maintains close working relationships with customers, develops new business, calls on architects, engineers and building officials and participates in a range of educational seminars.

Simpson Strong-Tie sells its products through an extensive distribution system comprising dealer distributors supplying thousands of retail locations nationwide, contractor distributors, home centers, lumber dealers, manufacturers of engineered wood products, and specialized contractors such as roof framers. In recent years, home centers have been one of SST’s important distribution channels, and SST’s sales to The Home Depot exceeded 10% of the Company’s consolidated net sales in 2011 and 2012 (see “Item 1A — Risk Factors,” “Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and Note 14 to the Company’s Consolidated Financial Statements). SST’s DIY and dealer products are used to build projects such as decks, patio covers and garage organization systems.

Simpson Strong-Tie dedicates substantial resources to customer service. SST produces numerous publications and point-of-sale marketing aids to serve specifiers, distributors, retailers and users for the various markets that it serves. These publications include general catalogs, as well as various specific catalogs, such as those for its fastener products. The catalogs and publications describe the products and provide load and installation information. SST also maintains several linked websites centered on www.strongtie.com, which include catalogs, product and technical information, code reports and other general information related to SST’s product lines and promotional programs.

Simpson Strong-Tie’s engineers not only design and test products, but also provide engineering support for customers. For example, this support might range from the discussion of a load value in a catalog to testing the suitability of an existing product in a unique application. SST’s sales force communicates with customers in each of its marketing channels, through its publications, seminars and frequent sales calls.

Based on its communications with customers, Simpson Strong-Tie believes that its products are important to its customers’ businesses, and it is SST’s policy to ship products within a few days of receiving the order, with many of the orders shipped the same day. Many of SST’s customers serve contractors that require rapid delivery of needed products. Home centers and dealers also require superior service because of fluctuating demand and to serve the needs of a broad base of customers. To satisfy these requirements, SST maintains appropriate inventory levels, has redundant manufacturing capability and some multiple dies to produce the same parts. SST maintains information systems that provide sales and inventory control and forecasting capabilities throughout its network of factories and warehouses. SST has special programs for contractors intended to ensure the prompt manufacture and delivery of custom products.

Simpson Strong-Tie believes that dealer and home center sales of SST products are significantly greater when the bins and racks at dealer and home center locations are adequately stocked with appropriate products. Various retailers carry varying numbers of SST products. SST’s sales force is engaged in ongoing efforts to inform retailers about SST’s merchandising programs and the appeal of the SST brand.

7

Manufacturing Process

Simpson Strong-Tie designs and manufactures most of its standard products. SST has concentrated on making its manufacturing processes as efficient as possible without compromising the quality or flexibility necessary to serve the needs of its customers. SST has developed and uses automated manufacturing processes. SST’s innovative manufacturing systems and techniques have allowed it to control manufacturing costs, even while developing both new products and products that meet customized requirements and specifications. SST’s development of specialized manufacturing processes also has permitted increased operating flexibility and enhanced product design innovation. As part of ongoing continuous improvement processes in its factories, SST’s major North American and European manufacturing facilities initiated lean manufacturing practices to improve efficiency and customer service. SST sources some products from third-party vendors, both domestically and internationally.

Simpson Strong-Tie is committed to helping people build safer structures economically through designing, engineering and manufacturing structural connectors, pre-fabricated shearwalls, anchors, fasteners and related products. With the support and involvement of management, SST has developed a quality system that manages defined procedures to ensure consistent product quality and also meets the requirements of product evaluation reports of the International Code Council (ICC) and the International Association of Plumbers and Mechanical Officials Uniform Evaluation Services (IAPMO-UES). SST is recognized in its industry as a manufacturer of high quality products. Since 1996, SST’s quality system has been registered under ISO 9001, an internationally recognized set of quality-assurance standards. The Company believes that ISO registration is a valuable tool for maintaining and promoting its high quality standards. As SST establishes new business locations through expansion or acquisitions, projects are established to integrate SST’s quality systems and achieve ISO 9001 registration. In addition, SST has six testing laboratories accredited to ISO standard 17025, an internationally accepted standard that provides requirements for the competence of testing and calibration laboratories. SST implements testing requirements through systematic control of its processes, enhancing SST’s standard for quality products, whether produced by SST or purchased from others.

Most of Simpson Strong-Tie’s wood construction products are produced with a high level of automation. For example, its connector products are produced using progressive dies run in automatic presses making parts from coiled sheet steel at rates that often exceed 100 strokes per minute. SST has significant press capacity and has multiple dies for some of its high volume products to enable production of these products close to the customer and to provide back-up capacity. SST’s also has smaller specialty production facilities, which primarily use batch production with some automated lines. For example, in Gallatin, Tennessee, SST produces non-ferrous and collated fasteners using automated batch production. The balance of production is accomplished through a combination of manual, blanking and numerically controlled (NC) processes that include robotic welders, lasers and turret punches. This capability allows SST to produce products with little redesign or set-up time, facilitating rapid turnaround for customers. New tooling is also highly automated. Dies are designed and produced using computer aided design (CAD) and computer aided machining (CAM) systems. CAD/CAM capability enables SST to create multiple dies quickly and design them to high standards. SST is constantly reviewing its product line to reduce manufacturing costs, increase automation, and take advantage of new types of materials.

Simpson Strong-Tie manufactures its concrete construction products at its facilities in Zhangziajong, China, Addison, Illinois, Baltimore, Maryland, Cardet, France, Seewen, Switzerland, Malbork, Poland, and Elvas, Portugal. The mechanical anchor products are produced with a high level of automation. Some products, such as epoxy and adhesive anchors, are mixed in batches and are then loaded into one-part or two-part dispensers, which mix the product on the job site because set-up times are usually very short. In addition, SST purchases a number of products, powder actuated pins, tools and accessories and certain of its mechanical anchoring products, from various sources around the world. These purchased products undergo inspections on a sample basis for conformance with ordered specifications and tolerances before being distributed.

Regulation

Simpson Strong-Tie’s product lines are subject to federal, state, county, municipal and other governmental and quasi-governmental regulations that affect product development, design, testing, analysis, load rating, application, marketing, sales, exportation, installation and use. A substantial portion of SST products have been evaluated and are recognized by governmental and product evaluation agencies. Some of the entities that recognize SST products include the International Code Council Uniform Evaluation Service (ICC-UES), the International Association of Plumbing and Mechanical Officials Uniform Evaluation Service (IAPMO-UES), the City of Los Angeles (LARR’s), the State of Florida, Underwriters Laboratory (UL), Factory Mutual (FM) and state departments of transportation.

8

These entities require that products be evaluated to applicable code requirements, design standards and test procedures. If the current code does not provide applicable testing and design standards for a product, these entities may develop their own product acceptance or evaluation criteria, which must be followed to obtain the product’s recognition and listing. Simpson Strong-Tie considers product evaluation, recognition and listing to the building code as a significant tool that facilitates and expedites the use of SST’s products by design professionals, building officials, inspectors, builders, home centers and contractors. Industry members are more likely to use building products that have the appropriate recognition and listing than products that lack this acceptance. SST devotes considerable time and testing resources to obtaining and maintaining appropriate listings for its products. SST actively participates in industry related professional associations and building code committees both to keep abreast of regulatory changes and to provide comments and expertise to these regulatory agencies.

Competition

Simpson Strong-Tie faces a variety of competition in all of the markets in which it participates. This competition ranges from subsidiaries of large national or international corporations to small regional manufacturers. While price is an important factor, SST also competes on the basis of quality, breadth of product line, proprietary technology, technical support, availability of inventory, service (including custom design and manufacturing), field support and product innovation. As a result of differences in structural design and building practices and codes, SST’s markets tend to differ by region. Within these regions, SST competes with companies of varying size, several of which also distribute their products nationally or internationally. See “Item 1A — Risk Factors.”

Raw Materials

The principal raw material used by Simpson Strong-Tie is steel, including stainless steel. SST generally orders steel to specific American Society of Testing and Materials (“ASTM”) standards. SST also uses materials such as carbon fiber, epoxies and acrylics in the manufacture of its chemical anchoring and reinforcing products. SST purchases raw materials from a variety of commercial sources. SST’s practice is to seek cost savings and enhanced quality by purchasing from a limited number of suppliers.

The steel industry is highly cyclical and prices for Simpson Strong-Tie’s raw materials are influenced by numerous factors beyond SST’s control, including general economic conditions, competition, labor costs, foreign exchange rates, import duties, raw material shortages and trade restrictions. The steel market continues to be dynamic, with a high degree of uncertainty about future pricing trends. Steel prices have increased from a May 2013 low. Based on current estimates the Company expects steel prices to remain relatively stable during the first quarter of 2014. Numerous factors may cause steel prices to increase in the future. In addition to increases in steel prices, mills have added surcharges for zinc, energy and freight in response to increases in their costs. These and other factors could adversely affect SST’s cost and access to steel. If steel prices increase and SST is not able to maintain its prices or increase them sufficiently, SST’s margins could deteriorate. See “Item 1A — Risk Factors” and “Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The Company historically has not attempted to hedge against changes in prices of steel or other raw materials.

Patents and Proprietary Rights

Simpson Strong-Tie has United States and foreign patents, the majority of which cover products that SST currently manufactures and markets. These patents, and applications for new patents, cover various design aspects of SST’s products, as well as processes used in their manufacture. SST continues to develop new potentially patentable products, product enhancements and product designs. Although SST does not intend to apply for additional foreign patents covering existing products, SST has developed an international patent program to protect new products that it may develop. In addition to seeking patent protection, SST relies on unpatented proprietary technology to maintain its competitive position. See “Item 1A — Risk Factors.”

Acquisitions and Expansion into New Markets

The Company’s growth potential depends, to some extent, on its ability to penetrate new markets, both domestically and internationally. See “Industry and Market Trends” and “Business Strategy.” Therefore, the Company may in the future pursue acquisitions of product lines or businesses. See “Item 1A — Risk Factors” and “Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

9

In December 2011, the Company purchased the assets of Fox Industries, Inc. (“Fox Industries”), a manufacturer of construction products and systems for restoring, protecting and strengthening concrete. The acquisition broadened the Company’s concrete construction product line, while also extending the overall line into more commercial, industrial and infrastructure markets. The purchase price was $8.7 million. As a result of the acquisition, the Company recorded goodwill of $3.9 million and intangible assets subject to amortization of $2.9 million. Net tangible assets, including accounts receivable, inventory, some prepaid expenses, machinery and equipment and some liabilities, accounted for the balance of the purchase price.

In December 2011, the Company purchased the assets of Automatic Stamping, LLC, a manufacturer of truss plates, and Automatic Stamping Auxiliary Services, LLC and certain real property and improvements owned by TIMMCO, Inc. (collectively “Automatic Stamping”). Combined with the Company’s truss design software, its operating expertise and distribution network, the Company is offering truss plates and software products to its existing North America customer base. The purchase price was $43.5 million. As a result of the acquisition, the Company recorded goodwill of $29.5 million and intangible assets subject to amortization of $4.6 million. Net tangible assets, including accounts receivable, inventory, land, building and machinery and equipment, accounted for the balance of the purchase price.

In January 2012, the Company purchased the equity of S&P Clever Reinforcement Company AG and S&P Clever International AG (collectively, “S&P Clever”) for $58.1 million. S&P Clever manufactures and sells engineered materials for repair, strengthening and restoration of concrete, asphalt and masonry construction and has operations throughout Europe. As a result of the acquisition, the Company assumed cash and cash equivalents of $6.8 million, other current assets of $10.8 million, non-current assets of $53.4 million, current liabilities of $12.6 million and non-current liabilities of $0.2 million. Included in non-current assets was goodwill of $19.3 million, intangible assets of $15.7 million and long-lived intangibles of $4.8 million related to in-progress product development.

In December 2012, the Company completed a transaction with Keymark Enterprises LLC (“Keymark”). In 2011, the Company had purchased various software assets from Keymark and had engaged Keymark to perform software development for the Company, for which the Company had agreed to compensate Keymark at rates equal to a multiple of Keymark’s costs. In the December 2012 transaction, the Company paid Keymark $9.1 million, hired thirty-nine Keymark employees to perform the development work that Keymark had previously been engaged to perform and purchased from Keymark various assets needed for that work. The December 2012 transaction also included termination of the Company’s 2011 software development agreement with Keymark, and the Company is entitled to certain software license revenue that was previously received by Keymark. As a result of the acquisition, the Company recorded goodwill of $5.9 million and intangible assets subject to amortization of $3.0 million. Equipment and prepaid expenses accounted for the balance of the purchase price.

In February 2013, the Company purchased certain assets relating to the TJ® ShearBrace (“ShearBrace”) product line of Weyerhaeuser NR Company (“Weyerhaeuser”), a Washington corporation, for $5.3 million in cash. The ShearBrace is a line of pre-fabricated shearwalls that complement the Company’s Strong-Wall shearwall, and is sold throughout North America. The Company’s revised provisional measurement of assets acquired included goodwill of $0.9 million and intangible assets of $3.6 million, both of which are subject to tax-deductible amortization. Inventory and equipment accounted for the balance of the purchase price.

In November 2013, Company purchased certain assets related to a connector line from Bierbach GmbH & Co. KG (“Bierbach”), a Germany corporation, for $1.2 million in cash and a contingent liability with an estimated fair value of $0.8 million. Bierbach manufactured and sold a line of connectors primarily in Germany. The Company’s provisional measurement of assets acquired included goodwill of $0.7 million, which was assigned to the Europe segment, and intangible assets of $0.6 million, both of which are subject to tax-deductible amortization. Inventory and tool and dies accounted for the balance of the purchase price.

Seasonality and Cyclicality

Simpson Strong-Tie’s sales are seasonal and cyclical. Operating results vary from quarter to quarter and with economic cycles. SST maintains high inventory levels and typically ship orders as we receive them, so we operate with little backlog. SST’s sales are also dependent, to a large degree, on the North American residential home construction industry. See “Item 1A — Risk Factors” and “Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

10

Environmental, Health and Safety Matters

The Company is subject to environmental laws and regulations governing emissions into the air, discharges into water, and generation, handling, storage, transportation, treatment and disposal of waste materials. The Company is also subject to other federal and state laws and regulations regarding health and safety matters. The Company believes that it has obtained all material licenses and permits required by environmental, health and safety laws and regulations in connection with the Company’s operations and that its policies and procedures comply in all material respects with existing environmental, health and safety laws and regulations. See “Item 1A — Risk Factors.”

Employees and Labor Relations

As of December 31, 2013, the Company had 2,295 full-time employees, of whom 914 were hourly employees and 1,381 were salaried employees. The Company believes that its overall compensation and benefits for the most part meet industry averages and that its relations with its employees are good.

A significant number of the employees at two of Simpson Strong-Tie’s facilities are represented by labor unions and are covered by collective bargaining agreements. SST’s facility in San Bernardino County, California, has two of SST’s collective bargaining agreements, one with tool and die craftsmen and maintenance workers, and the other with sheetmetal workers. These two contracts expire March 2014 and June 2014, respectively. Negotiations with the tool and die craftsmen and maintenance workers are ongoing. Negotiations to extend the sheetmetal workers labor contract have not begun. The Company believes that the negotiations to extend these two contracts are not likely to have a material adverse effect on the Company’s ability to provide products to its customers or on the Company’s profitability, even if new agreements are not reached before the existing agreements expire. Simpson Strong-Tie’s facility in Stockton, California, is also a union facility with two collective bargaining agreements, which also cover tool and die craftsmen and maintenance workers and sheetmetal workers. These two contracts will expire June and September 2015, respectively. See “Item 1A — Risk Factors.”

Available Information

The SEC maintains an internet site (www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The Company makes available, free of charge, on its website at www.simpsonmfg.com, copies of its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statement, company governance guidelines and code of ethics and the charters of the Audit, the Compensation and Leadership Development, and the Governance and Nominating Committees of its Board of Directors. Printed copies of any of these materials will also be provided free of charge on request.

Item 1A. Risk Factors.

You should carefully consider the following risks before you decide to buy or hold shares of our common stock. If any of the following risks actually occurs, our business, results of operations or financial condition would likely suffer. In such case, the trading price of our common stock could decline, and you may lose all or part of the money you paid to buy our stock.

This and other public reports may contain forward-looking statements based on current expectations, assumptions, estimates and projections about us and our industry. Those forward-looking statements involve risks and uncertainties. Our actual results could differ materially from those forward-looking statements as a result of many factors, as more fully described below and elsewhere in our public reports. We do not undertake to update publicly any forward-looking statements for any reason, even if new information becomes available or other events occur in the future.

11

Worldwide economic conditions and credit tightening materially and adversely affect our business.

Our business has been materially and adversely affected by changes in regional, national or global economic conditions. Such changes have included or may include reduced consumer spending, reduced availability of capital, inflation, deflation, adverse changes in interest rates, reduced energy availability and increased energy costs, and government initiatives to manage economic conditions. Continuing instability in financial markets and the deterioration of other national and global economic conditions may have further materially adverse effects on our operations, financial results or liquidity, including the following:

·the financial stability of our customers or suppliers may be compromised, which could result in additional bad debts for us or non-performance by suppliers;

·financial instability of the financial institutions where we have our cash balances invested could result in loss of our principal balance;

·one or more of the financial institutions that make available our revolving credit facility may become unable to fulfill their funding obligations, which could materially and adversely affect our liquidity;

·it may become even more costly or difficult for us to obtain the agreed or additional financing or to refinance our existing credit facility; and

·our assets may be impaired or subject to write down or write off.

Uncertainty about current global economic conditions may cause consumers of our products to postpone or refrain from spending in response to tighter credit, negative financial news, declines in income or asset values, or other adverse economic events or conditions, which could materially reduce demand for our products and materially and adversely affect our financial condition and operating results. Further deterioration of economic conditions would likely exacerbate these adverse effects, result in wide-ranging, adverse and prolonged effects on general business conditions, and materially and adversely affect our operations, financial results and liquidity.

Failure to comply with industry regulations could result in reduced sales and increased costs.

The design, capacity and quality of most of our products and manufacturing processes are subject to numerous and extensive regulations and standards promulgated by governmental, quasi-governmental and industry organizations. These regulations and standards are highly technical, complex and subject to frequent revision. If our products or manufacturing processes fail to comply with any regulations or standards, we may not be able to manufacture and market our products profitably. Failure to comply with regulations and standards could therefore materially reduce our sales and increase our costs.

If we fail to compete effectively, our revenue and profit margins could decline.

We face a variety of competition in all of the markets in which we participate. Many of our competitors have greater financial and other resources than we do. In addition, other technologies may render our products obsolete or noncompetitive. Other companies may find our markets attractive and enter those markets. Competitive pricing, including price competition or the introduction of new products, has in the past and may in the future have material adverse effects on our revenues and profit margins.

Our ability to compete effectively depends to a significant extent on the specification or approval of our products by architects, engineers, building inspectors, building code officials and customers. If a significant segment of those communities were to decide that the design, materials, manufacturing, testing or quality control of our products is inferior to that of any of our competitors, our sales and profits would be materially reduced.

If we lose all or part of a large customer, our sales and profits would decline.

We have substantial sales to a few large customers. Loss of all or part of our sales to a large customer would have a material adverse effect on our revenues and profits. Our largest customer accounted for 9%, 10% and 10% of net sales for the years ended December 31, 2013, 2012 and 2011, respectively. See Note 14 to the Company’s Consolidated Financial Statements. This customer may endeavor to replace our products in some or all markets, with lower-priced products supplied by others or may otherwise reduce its purchases of our products. We also might reduce our dependence on our largest customer by reducing or terminating sales to one or more of the customer’s subsidiaries. Any reduction in, or termination of, our sales to this customer would at least temporarily, and possibly longer cause a material reduction in our net sales, income from operations and net income. A reduction in or elimination of our sales to our largest customer, or another of our larger customers, would increase our relative dependence on our remaining large customers.

In addition, our customers include retailers and distributors. Retail and distribution businesses have consolidated over time, which could increase the material adverse effect of losing any of them.

Increases in prices of raw materials could negatively affect our sales and profits.

Our principal raw material is steel, including stainless steel. The steel industry is highly cyclical. Numerous factors beyond our control, such as general economic conditions, competition, worldwide demand, material and labor costs, energy costs, foreign exchange rates, import duties and other trade restrictions, influence prices for our raw

12

materials. Consolidation among domestic integrated steel producers, changes in supply and demand in steel markets, changes in foreign currency exchange rates and economic conditions, and other events have led to volatility in steel costs. The domestic steel market is heavily influenced by three major United States manufacturers. We have not always been able, and in the future we might not be able, to increase our product prices in amounts that correspond to increases in costs of raw materials, without materially and adversely affecting our sales and profits.

We have not attempted to hedge against changes in prices of steel or other raw materials. In recent years, however, we have increased our steel purchases in an effort to mitigate the effects of rising steel prices. In some years since 2007 our sales have declined with the declines in the housing and financial markets. As a result, our inventory fluctuated substantially. Inventory fluctuation can materially and adversely affect our margins, cash flow and profits.

If we cannot protect our technology, we will not be able to compete effectively.

Our ability to compete effectively with other companies depends in part on our ability to maintain the proprietary nature of our technology, in part through patents. We might not be able to protect or rely on our patents. Patents might not issue pursuant to pending patent applications. Others might independently develop the same or similar technology, develop around the patented aspects of any of our products or proposed products, or otherwise obtain access to or circumvent our proprietary technology. We also rely on unpatented proprietary technology to maintain our competitive position. We might not be able to protect our know-how or other proprietary information. If we are unable to maintain the proprietary nature of our significant products, our sales and profits could be materially reduced.

In attempting to protect our proprietary information, we sometimes initiate lawsuits against competitors and others that we believe have infringed or are infringing our rights. In such an event, the defendant may assert counterclaims to complicate or delay the litigation or for other reasons. Litigation may be very costly and may result in adverse judgments that affect our sales and profits materially and adversely.

Integrating acquired businesses may divert management’s attention away from our day-to-day operations.

We pursue acquisitions of product lines or businesses. Acquisitions involve numerous risks, including, for example:

·overvaluation of acquired businesses;

·difficulties assimilating the operations and products of acquired businesses;

·diversion of management’s attention from other business concerns;

·undisclosed existing or potential liabilities of acquired businesses;

·slow acceptance or rejection of acquired businesses’ products by our customers;

·risks of entering markets in which we have little or no prior experience;

·litigation involving activities, properties or products of acquired businesses;

·increased cost of regulatory compliance and enforcement;

·consumer and other claims related to products of acquired businesses; and

·the potential loss of key employees of acquired businesses.

In addition, future acquisitions may involve issuance of additional equity securities that dilute the value of our existing equity securities, increase our debt, cause impairment related to goodwill and cause impairment of, and amortization expenses related to, other intangible assets, which could materially and adversely affect our profitability. Any acquisition could materially and adversely affect our business and operating results.

Significant costs to integrate our acquired operations may negatively affect our financial condition and the market price of our stock.

We will incur costs from integrating acquired business operations, products and personnel. These costs may be significant and may include expenses and other liabilities for employee redeployment, relocation or severance, combining teams and processes in various functional areas, reorganization or closures of facilities, and relocation or disposition of excess equipment. The integration costs that we incur may negatively affect our profitability and the market price of our stock.

13

Our future growth may depend on our ability to penetrate new domestic and international markets, which could reduce our profitability.

International construction customs, standards, techniques and methods differ from those in the United States. Laws and regulations applicable in new markets may be unfamiliar to us. Compliance may be substantially more costly than we anticipate. As a result, we may need to redesign products, or invent or design new products, to compete effectively and profitably in new markets. We expect that we will need significant time, which may be years, to generate substantial sales or profits in new markets.

Other significant challenges to conducting business in foreign countries include, among other factors, local acceptance of our products, political instability, changes in import and export regulations, changes in tariff and freight rates, fluctuations in foreign exchange rates and currency controls. We might not be able to penetrate these markets and any market penetration that occurs might not be timely or profitable. If we do not penetrate these markets within a reasonable time, we will be unable to recoup part or all of the significant investments we will have made in attempting to do so.

We may decide to dispose of assets and incur material expenses in doing so.

We have terminated in the past and may terminate in the future product lines or businesses if we determine that the cost of operating them is not warranted by their expected profitability. For example, we sold the assets of our subsidiary Simpson Dura-Vent Company, Inc. in 2010, we terminated our heavy-duty mechanical anchor systems business in Ireland and Germany in 2012, and we sold our CarbonWrap concrete construction assets in 2013. In addition to employee severance, lease buy-outs and other shut-down costs, the net realizable value may be substantially less than our carrying cost of the assets of terminated operations, resulting in material costs and materially and adversely affecting our sales, assets, profitability and financial condition.

Seasons and business cycles affect our operating results.

Our sales are seasonal, with operating results varying from quarter to quarter. With some exceptions, our sales and income have historically been lower in the first and fourth quarters than in the second and third quarters of the year, as customers purchase construction materials in the late spring and summer months for the construction season. In addition, weather conditions, such as unseasonably warm, cold or wet weather, which affect, and sometimes delay or accelerate installation of some of our products, significantly affect our results of operations. Political and economic events can also affect our sales and profitability.

We have little control over the timing of customer purchases. Sales that we anticipate in one quarter may occur in another quarter, affecting both quarters’ results. In addition, we incur significant expenses as we develop, produce and market our products in anticipation of future orders. We maintain high inventory levels and typically ship orders as we receive them, so we operate with little backlog. As a result, net sales in any quarter generally depend on orders booked and shipped in that quarter. A significant portion of our operating expenses is fixed. Planned expenditures are based primarily on sales forecasts. When sales do not meet our expectations, our operating results will be reduced for the relevant quarters, as we will have already incurred expenses based on those expectations.

Our principal markets are in the building construction industry. That industry is subject to significant volatility due to real estate market cycles, fluctuations in interest rates, the availability, or lack thereof, of credit to builders and developers, inflation rates, weather, and other factors and trends. None of these factors or trends is within our control. Declines in commercial and residential construction, such as housing starts, and remodeling projects have reduced, and in the future can be expected to reduce, the demand for our products. Negative economic or construction industry performance adversely affects our business. Declines in construction activity or demand for our products have materially and adversely affected, and could in the future materially and adversely affect, our sales and profitability.

Product liability claims and product recalls could harm our reputation, sales and financial condition.

We design and manufacture most of our standard products and expect to continue to do so, although we buy raw materials and some manufactured products from others. We have on occasion found flaws and deficiencies in the manufacturing, design or testing of our products. We also have on occasion found flaws and deficiencies in raw materials and finished goods produced by others. Some flaws and deficiencies have not been apparent until after the products were installed by customers.

Many of our products are integral to the structural soundness or safety of the structures in which they are used. If any flaws or deficiencies exist in our products and if such flaws or deficiencies are not discovered and corrected before our products are incorporated into structures, the structures could be unsafe or could suffer severe damage,

14

such as collapse or fire, and personal injury could result. Errors in the installation of our products, even if the products are free of flaws and deficiencies, could also cause personal injury and unsafe structural conditions. To the extent that such damage or injury is not covered by our product liability insurance and we are held to be liable, we could be required to correct such damage and to compensate persons who might have suffered injury, and our reputation, business and financial condition could be materially and adversely affected.

Even if a flaw or deficiency is discovered before any damage or injury occurs, we may need to recall products, and we may be liable for any costs necessary to replace recalled products or retrofit the affected structures. Any such recall or retrofit could entail substantial costs and adversely affect our reputation, sales and financial condition. We do not carry insurance against recall costs or the adverse business effect of a recall, and our product liability insurance may not cover retrofit costs.

Claims resulting from a natural disaster might be made against us with regard to damage or destruction of structures incorporating our products. Any such claims, if asserted, could materially and adversely affect our business and financial condition.

Claims that we infringe intellectual property rights of others may materially increase our expenses and reduce our profits.

Other parties have in the past and may in the future claim that our products or processes infringe their patent rights and other intellectual property rights. We may incur substantial costs and liabilities in investigating, defending and resolving such claims, whether or not they are meritorious, which may materially reduce our profitability and materially and adversely affect our business and financial condition. Litigation can be disruptive to normal business operations and may result in adverse rulings or decisions. If any such infringement claim is asserted against us, we may be required to obtain a license or cross-license, modify our existing technology or design a new non-infringing technology, any of which could be costly and time-consuming. A ruling against us in an infringement lawsuit could include an injunction barring our production or sale of any infringing product. A damage award against us could include an award of royalties or lost profits and, if the court finds willful infringement, treble damages and attorneys’ fees.

Complying or failing to comply with environmental, health and safety laws and regulations could affect us materially and adversely.

We are subject to environmental laws and regulations governing emissions into the air, discharges into water, and generation, handling, storage, transportation, treatment and disposal of waste materials. We are also subject to other federal and state laws and regulations regarding health and safety matters.

Our manufacturing operations involve the use of solvents, chemicals, oils and other materials that are regarded as hazardous or toxic. We also use complex and heavy machinery and equipment that can pose severe safety hazards, especially if not properly and carefully used. Some of our products also incorporate materials that are hazardous or toxic in some forms, such as zinc and lead used in some steel galvanizing processes, chemicals used in our acrylic and epoxy anchoring products, and chemicals used in our concrete repair, strengthening and protecting products. The gun powder used in our powder-actuated tools is explosive. Misuse of other materials in some of our products could also cause injury or sickness.

If we do not obtain all material licenses and permits required by environmental, health and safety laws and regulations, we may be subject to regulatory action by governmental authorities. If our policies and procedures do not comply in all respects with existing environmental, health and safety laws and regulations, our activities might violate such laws and regulations. Even if our policies and procedures do comply, but our employees fail or neglect to follow them in all respects, we might incur similar liability. Relevant laws and regulations could change or new ones could be adopted that require us to obtain additional licenses and permits and cause us to incur substantial expense.

Our generation, handling, use, storage, transportation, treatment or disposal of hazardous or toxic materials, machinery and equipment might cause injury to persons or to the environment. We may need to take remedial action if properties that we occupy are contaminated by hazardous or toxic substances.

Any change in laws or regulations, any legal or regulatory violations, or any contamination, could materially and adversely affect our business and financial condition.

15

Complying or failing to comply with new conflict minerals regulations could materially and adversely affect our supply chain, our relationships with customers and suppliers and our financial results.

We are subject to new conflict mineral disclosure regulations adopted by the Securities and Exchange Commission in 2012. Under the new regulations, public companies that manufacture products that use (either in the products or the production process) specified minerals and their derivatives, including tin, tantalum, tungsten and gold, must provide disclosure annually, including whether or not such minerals originate from the Democratic Republic of Congo or adjoining countries, and in some cases must perform extensive due diligence on their supply chains for such minerals. Implementation of these new requirements could adversely affect the sourcing, availability and pricing of such minerals, which we use in manufacturing some of our products. We will incur added costs to comply with the disclosure requirements, including costs related to determining the source of such minerals used in our products. We may not be able to ascertain the origins of such minerals that we use and may not be able to satisfy requests from customers to certify that our products are free of conflict minerals. These new requirements also could constrain the pool of suppliers from which we source such minerals. We may be unable to obtain conflict-free minerals at competitive prices. Such consequences will increase costs and may materially and adversely affect our manufacturing operations and profitability.

We depend on key management and technical personnel, the loss of whom could harm our business.

We depend on our key management and technical personnel. The loss of one or more key employees could materially and adversely affect us.

Our success also depends on our ability to attract and retain highly qualified technical, marketing and management personnel necessary for the maintenance and expansion of our activities. We face strong competition for such personnel and may not be able to attract or retain such personnel. In addition, when we experience periods with little or no profits, a decrease in compensation based on our profits may make it difficult to attract and retain highly qualified personnel.

Any work stoppage or interruption by employees could materially and adversely affect our business and financial condition.

A significant number of our employees are represented by labor unions and covered by collective bargaining agreements that will expire in 2014 and 2015. A work stoppage or interruption by a significant number of our employees could have a material and adverse effect on our sales and profitability.

International operations expose us to foreign exchange rate risk.

We have foreign exchange rate risk in our international operations and through purchases from foreign vendors. We do not currently hedge this risk. Changes in currency exchange rates could materially and adversely affect our sales and profitability.

Natural disasters could decrease our manufacturing capacity.

Most of our current and planned manufacturing facilities are located in geographic regions that have experienced major natural disasters, such as earthquakes, floods and hurricanes. Our disaster recovery plan may not be adequate or effective. We do not carry earthquake insurance. Other insurance that we carry is limited in the risks covered and the amount of coverage. Our insurance would not be adequate to cover all of our resulting costs, business interruption and lost profits when a major natural disaster occurs. A natural disaster rendering one or more of our manufacturing facilities totally or partially unusable, whether or not covered by insurance, would materially and adversely affect our business and financial condition.

Control by our principal stockholder reduces the ability of other stockholders to influence management.

Barclay Simpson controls approximately 15% of the outstanding shares of our common stock. Mr. Simpson and Thomas J Fitzmyers, the Chairman of our Board of Directors (even though Mr. Fitzmyers owns less than 1% of the outstanding shares of our common stock), have significant influence with respect to the election of our directors and over some fundamental changes affecting us, such as a merger or sale of assets or amendment of our Certificate of Incorporation or Bylaws.

16

Additional financing, if needed, to fund our working capital, growth or acquisitions may not be available on reasonable terms, or at all.

If our cash requirements for working capital or to fund our growth increase to a level that exceeds the amount of cash that we generate from operations, or if we should decide to make an acquisition that requires more cash than we have available internally and through our current credit arrangements, we will need to seek additional financing. In that event, we may need to enter into additional or new borrowing arrangements or consider equity financing. Additional or new borrowings may not be available on reasonable terms, or at all. Our ability to raise money by issuing and selling shares of our common or preferred stock would depend on general market conditions and the demand for our stock. We may be unable to raise adequate capital on reasonable terms by selling stock. If we sell stock, our existing stockholders could experience substantial dilution. Our inability to secure additional financing could prevent the expansion of our business, internally and through acquisitions.

Any issuance of preferred stock may dilute your investment and reduce funds available for dividends.

Our Board of Directors is authorized by our Certificate of Incorporation to determine the terms of one or more series of preferred stock and to authorize the issuance of shares of any such series on such terms as our Board of Directors may approve. Any such issuance could be used to impede an acquisition of our business that our Board of Directors does not approve, further dilute the equity investments of holders of our common stock and reduce funds available for the payment of dividends to holders of our common stock.

Our stock price is likely to be volatile and could drop.

The trading price of our common stock could be subject to wide fluctuations in response to period-to-period variations in operating results, changes in earnings estimates by analysts, announcements of technological innovations or new products by us or our competitors, general conditions in the construction and construction materials industries, relatively low trading volume in our common stock and other events or factors. In addition, the stock market is subject to extreme price fluctuations. This volatility has had a substantial effect on the market prices of securities issued by many companies for reasons unrelated to the operating performance of those companies. Securities market fluctuations may materially and adversely affect the market price of our common stock.

Future sales of common stock could adversely affect our stock price.

Our issuance of substantial amounts of our common stock could adversely affect the prevailing market price for our common stock. All of the outstanding shares of our common stock are freely tradable without restriction under the Securities Act of 1933, other than 7.7 million shares held (as of February 24, 2014) by our “affiliates,” as that term is defined in Rule 144 under the Securities Act of 1933. Options to purchase 1.0 million shares of our common stock were outstanding as of December 31, 2013, including options to purchase 0.6 million shares that were exercisable. If a substantial number of shares were sold in the public market pursuant to Rule 144 or on exercise of options, the trading price of our common stock in the public market could be adversely affected.

Delaware law and our stockholder rights plan contain anti-takeover provisions that could deter takeover attempts that might otherwise be beneficial to our stockholders.

Provisions of Delaware law could make it more difficult for a third party to acquire us. Section 203 of the Delaware General Corporation Law may make the acquisition of Simpson Manufacturing Co., Inc. and the removal of incumbent officers and directors more difficult by prohibiting stockholders holding 15% or more of our outstanding voting stock from acquiring Simpson Manufacturing Co., Inc. without the consent of our Board of Directors for at least three years from the date they first hold 15% or more of the voting stock. Barclay Simpson and his affiliates are not subject to this provision of Delaware law with respect to their investment in Simpson Manufacturing Co., Inc. In addition, our Stockholder Rights Plan has significant anti-takeover effects by causing substantial dilution to a person or group that attempts to acquire us on terms not approved by our Board of Directors.

We are subject to a number of significant risks that might cause our actual results to vary materially from our plans, targets or projections, including:

·lack of market acceptance of new products;

·failing to develop new products with significant market potential;

·increased labor costs, including significant increases in worker’s compensation insurance premiums and health care benefits;

17

·failing to increase, or even maintain, sales and profits;

·failing to anticipate, appropriately invest in and effectively manage the human, information technology and logistical resources necessary to support the growth of our business, including managing the costs associated with such resources;

·failing to integrate, leverage and generate expected rates of return on investments, including expansion of existing businesses and expansion through acquisitions;

·failing to generate sufficient future positive operating cash flows and, if necessary, secure adequate external financing to fund our growth; and

·interruptions in service by common carriers that ship goods within our distribution channels.

If we change significantly the location, nature or extent of some of our manufacturing operations, we may reduce our net income.

If we decide to change significantly the location, nature or extent of a portion of our manufacturing operations, we may need to record an impairment of our goodwill. Our goodwill totaled $129.2 million at December 31, 2013. Recording an impairment of our goodwill correspondingly reduces our net income. In 2007, for example, we decided to move part of our Canadian manufacturing operations to China, and as a result, we recorded a goodwill impairment of $10.7 million, which materially reduced our net income in 2007. Other changes or events in the future could further impair our recorded goodwill, which could also materially and adversely affect our profitability.

Impairment charges on goodwill or other intangible assets would adversely affect our financial position and results of operations.

We are required to perform impairment tests on our goodwill and indefinite-lived intangible assets annually or at any time when events occur that could affect the value of such assets. Definite-lived intangible assets are tested for impairment annually or at any time when events occur that could affect the value of such assets. To determine whether a goodwill impairment has occurred, we compare fair value of each of our reporting units with its carrying value. Significant and unanticipated changes in circumstances, such as significant adverse changes in business climate, adverse actions by regulatory authorities, unanticipated competition, loss of key customers or changes in technology or markets, can require a charge for impairment that can materially and adversely affect our reported net income and our stockholders’ equity. For example, in 2011, our annual impairment test resulted in goodwill impairment charge of $1.3 million associated with assets acquired in England in 1999 as part of our U.K. reporting unit, and in 2012, our annual impairment test resulted in goodwill impairment charge of $2.3 million associated with assets acquired in Germany in 2002 and 2008 as part of our Germany reporting unit. The carrying value of each of these reporting units exceeded their respective fair values, primarily due to reduced future expected net cash flows from weakening profit margins. If current adverse conditions in the home-building industry, the financial markets or the economy generally should continue longer than we expect, we may need to take further charges for impairment, which we are not now able to estimate, but which may be substantial.

Failure of our internal control over financial reporting could harm our business and financial results.

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is a process to provide reasonable assurance regarding the reliability of financial reporting for external purposes in accordance with accounting principles generally accepted in the United States. Internal control over financial reporting includes:

·maintaining records that in reasonable detail accurately and fairly reflect our transactions;

·providing reasonable assurance that transactions are recorded as necessary for preparation of the consolidated financial statements;

·providing reasonable assurance that receipts and expenditures of our assets are made in accordance with management authorization; and

·providing reasonable assurance that unauthorized acquisition, use or disposition of our assets that could have a material effect on our consolidated financial statements would be prevented or detected on a timely basis.

Because of the inherent limitations of internal control, our internal control over financial reporting might not detect or prevent misstatement of our consolidated financial statements. Our growth and entry into new, globally dispersed markets puts significant additional pressure on our system of internal control over financial reporting. Failure to maintain an effective system of internal control over financial reporting could limit our ability to report our financial results accurately and timely or to detect and prevent fraud.

18

Failure of our accounting systems could harm our business and financial results.

We have implemented a commercially available Microsoft third-party accounting software system, initially focused on replacing our internally developed general ledger and purchasing and payables systems, for use in our operations in the United States, Europe and Asia. Any errors or defects in, or unavailability of, third-party software or our implementation of the systems, could result in errors in our financial statements, which could materially and adversely affect our business. If we continue to use our other internally developed accounting systems and they are not able to accommodate our future business needs, or if we find that they or any new systems we may implement contain errors or defects, our business and financial condition could be materially and adversely affected.

Our international operations may be materially and adversely affected by factors beyond our control.

Economic, social and political conditions, laws, practices and customs vary widely among the countries where we produce or sell our products. Our operations outside of the United States are subject to a number of risks and potential costs, including, for example, lower profit margins, less protection of intellectual property and economic, political and social uncertainty in some countries. Our sales and profits depend, in part, on our ability to develop and implement policies and strategies that effectively anticipate and manage these and other risks in the countries where we do business. These and other risks may materially and adversely affect our operations in any particular country and our business as a whole. Inflation in emerging markets also makes our products more expensive there and increases the market and credit risks to which we are exposed.

Our international operations depend on our successful management of our subsidiaries outside of the United States.

We conduct most of our international business through wholly owned subsidiaries. Managing distant subsidiaries and fully integrating them into our business is challenging. We cannot directly supervise every aspect of the operations of our subsidiaries operating outside the United States. As a result, we rely on local managers and staff. Cultural factors and language differences can result in misunderstandings among internationally dispersed personnel. The risk that unauthorized conduct may go undetected may be greater in subsidiaries outside of the United States. These problems could adversely affect our sales and profits.

Failure to comply with export, import, and sanctions laws and regulations could affect us materially and adversely.

We are subject to a number of export, import and economic sanction regulations, including the International Traffic in Arms Regulations (the “ITAR”), the Export Administration Regulations (the “EAR”) and U.S. sanction regulations administered by the U.S. Department of Treasury, Office of Foreign Assets (“OFAC”). Foreign governments where we have operations also implement export, import and sanction laws and regulations.

If we do not obtain all necessary import and export licenses required by applicable export and import regulations, including the ITAR and the EAR, we may be subject to fines, penalties and other regulatory action by governmental authorities, including, among other things, having our export or import privileges suspended. If we conduct business with any countries, entities or individuals sanctioned by OFAC or any equivalent foreign regulation or law, or otherwise fail to comply in any manner with applicable sanction regulations or laws, we may be subject to fines, penalties and other regulatory action. Even if our policies and procedures for exports, imports and sanction regulations comply, but our employees fail or neglect to follow them in all respects, we might incur similar liability.

Any change in applicable export, import or sanction laws or regulations or any legal or regulatory violations could materially and adversely affect our business and financial condition.

Our manufacturing facilities in China complicate our inventory management.

We maintain manufacturing capability in various parts of the world, in part to allow us to serve our customers with prompt delivery of needed products. Such customer service is a significant factor in our efforts to compete with larger companies that have greater resources than we have. In recent years, we have substantially expanded our manufacturing in China. Much of the output of our manufacturing in China is and will be intended for export to other parts of Asia and elsewhere. Because of the unusually great distances between our manufacturing facilities in China and the markets to which the products made there will be shipped, we may have difficulty providing adequate service to our customers, which may put us at a competitive disadvantage. Our attempts to provide prompt delivery may necessitate that in China we produce and keep on hand substantially more inventory of finished products than

19

would otherwise be needed. Inventory fluctuations can materially and adversely affect our margins, cash flow and profits.

If we fail to keep pace with advances in our industry or fail to persuade customers to adopt new products we introduce, customers may not buy our products, which would adversely affect our sales and profits.

Constant development of new technologies and techniques, frequent new product introductions and strong price competition characterize the construction industry. The first company to introduce a new product or technique to the market gains a competitive advantage. Our future growth depends, in part, on our ability to develop products that are more effective or safer or incorporate emerging technologies better than our competitors’ products. Sales of our existing products may decline rapidly if a competitor were to introduce superior products, or even if we announce a new product of our own. If we fail to make sufficient investments in research and development or if we focus on technologies that do not lead to better products, our current and planned products could be surpassed by more effective or advanced products. If we fail to manufacture our products economically and market them successfully, our sales and profits would be materially and adversely affected.

Changes in accounting standards could materially and adversely affect our financial results.

The accounting rules applicable to public companies are subject to frequent revision. Future changes in accounting standards, guidance and interpretations could require us to change the way we measure revenue, expense or balance sheet amounts, which could result in material and adverse change to our reported results of operations or financial condition.

Climate change could materially and adversely affect our business.

Scientific reports indicate that, as a result of human activity:

·temperatures around the world have been increasing and are likely to continue to increase, as a result of increasing atmospheric concentrations of carbon dioxide and other carbon compounds,

·the frequency and severity of storms and flooding are likely to increase,

·severe weather is likely to occur in places where the climate has historically been more mild, and

·average sea levels have risen and are likely to continue to rise, threatening worldwide coastal development.

We cannot predict the effects that these phenomena may have on our business. They might, for example:

·depress or reverse economic development,

·reduce the demand for construction,

·increase the cost and reduce the availability of fresh water,

·destroy forests, increasing the cost and reducing the availability of wood products used in construction,

·increase the cost and reduce the availability of raw materials and energy,

·increase the cost of capital,

·increase the cost and reduce the availability of insurance covering damage from natural disasters,

·lead to claims regarding the content or adequacy of our public disclosures, and

·lead to new laws and regulations that increase our expenses and reduce our sales.

Any of these consequences, and other consequences of climate change that we do not foresee, could materially and adversely affect our sales, profits and financial condition.

We are subject to U.S. and international tax laws that could affect our financial results.

We conduct international operations through our subsidiaries. Tax laws affecting international operations are complex and subject to change. Our income tax liabilities in the different countries where we operate depend in part on internal settlement prices and administrative charges among us and our subsidiaries. These arrangements require us to make judgments with which tax authorities may disagree. Tax authorities may impose additional tariffs, duties, taxes, penalties and interest on us. For example, we manufacture steel products in foreign countries for importation into the U.S. and other countries, and government agencies may impose substantial prospective or retroactive tariffs on such products. Transactions that we have arranged in light of current tax rules could have material and adverse consequences if tax rules change, and changes in tax rules or imposition of any new or increased tariffs, duties and taxes could materially and adversely affect our sales, profits and financial condition.

20

Contracts that we file as exhibits to our public reports contain recitals, representations and warranties that may not be factually correct.

The parties to any agreement or other instrument that we file as an exhibit to this or any other report did not necessarily intend that any recital, representation, warranty or other statement of purported fact in the instrument establishes or confirms any fact, even if it is worded as such. The parties generally intended such statements to allocate contractual risk between the parties, and the statements often are subject to standards of materiality that differ from the standards applicable to our reports. In addition, such statements may have been qualified by other materials that we have not filed with (or incorporated by reference into) this or any other report or document. Such exhibits should be read in the context of our other disclosures in our reports. We believe the text of each of our reports was complete and correct in all material respects when we filed it.

If we are unable to protect our information systems against data corruption, cyber-based attacks or network security breaches, our operations could be disrupted.

We depend on information technology networks and systems, including the internet, to process, transmit and store electronic information. We depend on our information technology infrastructure for electronic communications among our locations around the world and between our personnel and our subsidiaries, customers and suppliers. Security breaches of this infrastructure could create system disruptions, shutdowns or unauthorized disclosure of confidential information. Security breaches could disrupt our operations, and we could suffer financial damage or loss because of lost or misappropriated information.

Item 1B. Unresolved Staff Comments.

None.

Item 2. Properties.

The Company owns its home office in Pleasanton, California, and its principal United States manufacturing facilities in Stockton and San Bernardino County, California, McKinney, Texas, and Columbus, Ohio. The principal manufacturing facilities located outside the United States, the majority of which are owned, are in Canada, France, Denmark, Germany, Poland, Switzerland, Portugal and China. The Company also owns and leases smaller manufacturing facilities, warehouses, research and development facilities and sales offices in the United States, Europe, Australia, Asia, the Middle East, South Africa and Chile. As of March 7, 2014, the Company’s owned and leased facilities were as follows:

	Number
	Of	Approximate Square Footage
	Properties	Owned	Leased	Total
		(in thousands of square feet)
North America	21	2,122	603	2,725
Europe	19	573	156	729
Asia/Pacific	14	175	52	227
Administrative and all other	2	368	—	368
Total	56	3,238	811	4,049

The Company’s properties are constructed primarily of steel, brick or concrete and, in management’s opinion, are maintained in good operating condition. The Company’s manufacturing facilities are equipped with specialized equipment and use extensive automation. The Company considers its existing and planned facilities to be adequate for its operations as currently conducted and as planned through 2014. The Company’s leased facilities typically have renewal options and have expiration dates through 2022. The Company believes it will be able to extend leases on its various facilities as necessary, as they expire. The manufacturing facilities currently are being operated with one full shift. The Company anticipates that it may require additional facilities to accommodate possible future growth.

In January 2012, as part of the acquisition of S&P Clever, the Company acquired land and buildings in Switzerland, Germany and Poland. In March 2012, the Company sold its facility in San Leandro, California. In June 2013, the Company sold its facility in Hungen, Germany, and in September 2013, the Company sold its facility in Ireland.

21

The Company retained its real estate in Vacaville, California. On completion of the sale of the Simpson Dura-Vent assets to M&G in 2010, the Company leased that facility to M&G for approximately $0.9 million per year for ten years. These properties are classified in the “Administrative & All other” segment.

Item 3. Legal Proceedings.

From time to time, the Company is involved in various legal proceedings and other matters arising in the normal course of business.  The resolution of claims and litigation is subject to inherent uncertainty and could have a material adverse effect on the Company’s financial condition, cash flows and results of operations.

Pending Claims

Four lawsuits (the “Cases”) have been filed against the Company in the Hawaii First Circuit Court: Alvarez v. Haseko Homes, Inc. and Simpson Manufacturing, Inc., Civil No. 09-1-2697-11 (“Case 1”); Ke Noho Kai Development, LLC v. Simpson Strong-Tie Company, Inc., and Honolulu Wood Treating Co., LTD., Case No. 09-1-1491-06 SSM (“Case 2”); North American Specialty Ins. Co. v. Simpson Strong-Tie Company, Inc. and K.C. Metal Products, Inc., Case No. 09-1-1490-06 VSM (“Case 3”); and Charles et al. v. Haseko Homes, Inc. et al. and Third Party Plaintiffs Haseko Homes, Inc. et al. v. Simpson Strong-Tie Company, Inc., et al., Civil No. 09-1-1932-08 (“Case 4”).  Case 1 was filed on November 18, 2009.  Cases 2 and 3 were originally filed on June 30, 2009.  Case 4 was filed on August 19, 2009.  The Cases all relate to alleged premature corrosion of the Company’s strap tie holdown products installed in buildings in a housing development known as Ocean Pointe in Honolulu, Hawaii, allegedly causing property damage.  Case 1 is a putative class action brought by the owners of allegedly affected Ocean Pointe houses.  Case 1 was originally filed as Kai et al. v. Haseko Homes, Inc., Haseko Construction, Inc. and Simpson Manufacturing, Inc., Case No. 09-1-1476, but was voluntarily dismissed and then re-filed with a new representative plaintiff.  Case 2 is an action by the builders and developers of Ocean Pointe against the Company, claiming that either the Company’s strap tie holdowns are defective in design or manufacture or the Company failed to provide adequate warnings regarding the products’ susceptibility to corrosion in certain environments.  Case 3 is a subrogation action brought by the insurance company for the builders and developers against the Company claiming the insurance company expended funds to correct problems allegedly caused by the Company’s products.  Case 4 is a putative class action brought, like Case 1, by owners of allegedly affected Ocean Pointe homes.  In Case 4, Haseko Homes, Inc. (“Haseko”), the developer of the Ocean Pointe development, brought a third party complaint against the Company alleging that any damages for which Haseko may be liable are actually the fault of the Company. Similarly, Haseko’s sub-contractors on the Ocean Pointe development brought cross-claims against the Company seeking indemnity and contribution for any amounts for which they may ultimately be found liable. None of the Cases alleges a specific amount of damages sought, although each of the Cases seeks compensatory damages, and Case 1 seeks punitive damages.  Cases 1 and 4 have been consolidated.  In December 2012, the Court granted the Company summary judgment on the claims asserted by the plaintiff homeowners in Cases 1 and 4, and on the third party complaint and cross-claims asserted by Haseko and the sub-contractors, respectively, in Case 4. In April 2013, the Court granted Haseko and the sub-contractors’ motion for leave to amend their cross-claims to allege a claim for negligent misrepresentation. The Company continues to investigate the facts underlying the claims asserted in the Cases, including, among other things, the cause of the alleged corrosion; the severity of any problems shown to exist; the buildings affected; the responsibility of the general contractor, various subcontractors and other construction professionals for the alleged damages; the amount, if any, of damages suffered; and the costs of repair, if needed.  At this time, the likelihood that the Company will be found liable under any legal theory and the extent of such liability, if any, are unknown.  Management believes the Cases may not be resolved for an extended period.  The Company is defending itself vigorously in connection with the Cases.

Based on facts currently known to the Company, the Company believes that all or part of the claims alleged in the Cases may be covered by its insurance policies.  On April 19, 2011, an action was filed in the United States District Court for the District of Hawaii, National Union Fire Insurance Company of Pittsburgh, PA v. Simpson Manufacturing Company, Inc., et al., Civil No. 11-00254 ACK.  In this action, Plaintiff National Union Fire Insurance Company of Pittsburgh, Pennsylvania (“National Union”), which issued certain Commercial General Liability insurance policies to the Company, seeks declaratory relief in the Cases with respect to its obligations to defend or indemnify the Company, Simpson Strong-Tie Company Inc., and a vendor of the Company’s strap tie holdown products.  By Order dated November 7, 2011, all proceedings in the National Union action have been stayed.  If the stay is lifted and the National Union action is not dismissed, the Company intends vigorously to defend all claims advanced by National Union.

On April 12, 2011, Fireman’s Fund Insurance Company (“Fireman’s Fund”), another of the Company’s general liability insurers, sued Hartford Fire Insurance Company (“Hartford”), a third insurance company from whom the

22

Company purchased general liability insurance, in the United States District Court for the Northern District of California, Fireman’s Fund Insurance Company v. Hartford Fire Insurance Company, Civil No. 11 1789 SBA (the “Fireman’s Fund action”).  The Company has intervened in the Fireman’s Fund action and seeks a stay of proceedings in that action as well, pending resolution of the underlying Ocean Pointe cases.

On November 21, 2011, the Company commenced a lawsuit against National Union, Fireman’s Fund, Hartford and others in the Superior Court of the State of California in and for the City and County of San Francisco (the “San Francisco coverage action”).  In the San Francisco coverage action, the Company alleges generally that the separate pendency of the National Union action and the Fireman’s Fund action presents a risk of inconsistent adjudications; that the San Francisco Superior Court has jurisdiction over all of the parties and should exercise jurisdiction at the appropriate time to resolve any and all disputes that have arisen or may in the future arise among the Company and its liability insurers; and that the San Francisco coverage action should also be stayed pending resolution of the underlying Ocean Pointe Cases. The San Francisco coverage action has been ordered stayed pending resolution of the Cases.

Nishimura v. Gentry Homes, Ltd; Simpson Manufacturing Co., Inc.; and Simpson Strong-Tie Company, Inc., Civil no. 11-1-1522-07, was filed in the Circuit Court of the First Circuit of Hawaii on July 20, 2011.  The Nishimura case alleges premature corrosion of the Company’s strap tie holdown products in a housing development at Ewa Beach in Honolulu, Hawaii.  In February 2012, the Court dismissed three of the five claims the plaintiffs had asserted against the Company.  In December 2013, the Court granted the Company’s motion for summary judgment on the remaining claims.  Currently, the case is closed, though it remains subject to appeal.

With respect to these legal proceedings, individually and in the aggregate, the Company has not yet been able to determine whether an unfavorable outcome is probable or reasonably possible and has not been able to reasonably estimate the amount or range of any possible loss. As a result, no amounts have been accrued or disclosed in the accompanying consolidated financial statements with respect to these legal proceedings.

The Company is not engaged in any other legal proceedings as of the date hereof, which the Company expects individually or in the aggregate will have a material adverse effect on the Company’s financial condition, cash flows or results of operations. The resolution of claims and litigation is subject to inherent uncertainty and could have a material adverse effect on the Company’s financial condition, cash flows and results of operations.

Item 4. Mine Safety Disclosures.

None.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

The Company’s common stock is listed on the New York Stock Exchange (“NYSE”) under the symbol “SSD.” The following table shows the range of high and low closing sale prices per share of the common stock as reported by the NYSE and dividends paid per share of common stock for the calendar quarters indicated:

	Market Price				Dividends
Quarter	High		Low		Paid
2013
Fourth	$	37.23	$	30.58	$	0.125
Third	33.34		29.47		0.125
Second	31.86		27.87		—
First	33.87		28.01		0.125
2012
Fourth	$	33.74	$	28.57	$	0.250
Third	30.06		23.69		0.125
Second	32.48		26.64		0.125
First	34.55		28.69		0.125

23

The Company estimates that as of February 18, 2014, approximately 6,612 persons beneficially owned shares of the Company’s common stock either directly or through nominees.

The Company began paying quarterly dividends of $0.05 per common share in January 2004. The Company paid dividends of $0.125 per share in the first, third and fourth quarters of 2013. The Company paid quarterly dividends of $0.125 per share in 2012 and also paid a special one-time dividend of $0.125 per share in December 2012 in lieu of the regular quarterly dividend that the Company would have otherwise paid in the second quarter of 2013. Future dividends, if any, will be determined by the Company’s Board of Directors, based on the Company’s earnings, cash flows, financial condition and other factors deemed relevant by the Board of Directors.

In February 2014, the Company’s Board of Directors authorized the Company to repurchase up to $50.0 million of the Company’s common stock. The authorization will remain in effect through the end of 2014. This replaces the $50.0 million repurchase authorization from January 2013. In 2013, the Company repurchased 0.3 million shares of its stock, at a cost of $9.8 million; in 2012, the Company did not repurchase any shares of its common stock; and in 2011, the Company repurchased 1.9 million shares of its common stock, at a cost of $53.2 million.

The following table sets forth certain information as of December 31, 2013, concerning (a) all equity compensation plans of the Company previously approved by the stockholders and (b) all equity compensation plans of the Company not previously approved by the stockholders.

				(c)
				Number of
	(a)			securities remaining
	Number of securities	(b)		available for future
	to be issued	Weighted-average		issuance under equity
	on exercise of	exercise price of		compensation plans
	outstanding options,	outstanding options,		(excluding securities
Plan Category	warrants & rights (1)	warrants & rights		reflected in column (a))
Equity compensation plans approved by stockholders	1,469,241	$	30.18	6,032,616	(1)
Equity compensation plans not approved by stockholders	0	N/A		43,600	(2)
Total	1,469,241	$	30.18	6,076,216	(1)(2)

(1)Includes 1,021,449 shares subject to issuance on exercise of stock options granted under the Company’s 2011 Incentive Plan and 447,792 shares of unvested restricted stock units awarded under the Company’s 2011 Incentive Plan in 2012 and 2013.

(2)Includes 11,200 shares issued on January 6, 2014, under the Company’s 1994 Employee Stock Bonus Plan. As of December 31, 2013, the Company had reserved 200,000 shares of common stock for issuance as bonuses under the 1994 Employee Stock Bonus Plan, of which 156,400 shares had been issued.

24

Company Stock Price Performance

The graph below compares the cumulative total stockholder return on the Company’s common stock from December 31, 2008, through December 31, 2013, with the cumulative total return on the S & P 500 Index and the Dow Jones Building Materials Index over the same period (assuming the investment of $100 in the Company’s common stock and in each of the indices on December 31, 2008, and reinvestment of all dividends).

Item 6. Selected Financial Data.

The following table sets forth selected consolidated financial information with respect to the Company for each of the five years ended December 31, 2013, 2012, 2011, 2010 and 2009 (presented in thousands, except per share amounts), derived from the Consolidated Financial Statements of the Company. The Company sold its venting operation in 2010 and has classified the venting operation as discontinued operations for the periods presented herein. The presentation of the information in the tables below complies with the accounting pronouncements, but is not necessarily comparable with prior years. The financial information below includes the results of operations of acquired companies beginning on the dates of acquisition. For a summary of recent acquisitions, see “Note 2 — Acquisitions” to the consolidated financial statements included herein. The data presented below should be read in conjunction with the Consolidated Financial Statements and related Notes thereto and “Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere herein.

25

(in thousands, except per-share data)

	Years Ended December 31,
	2013		2012		2011		2010			2009
Statement of Operations Data:
Net sales	$	706,329	$	657,236	$	603,446	$	555,487		$	526,544
Cost of sales	391,791		373,759		332,642		311,349			341,645
Gross profit	314,538		283,477		270,804		244,138			184,899
Research and development and other engineering expense	36,843		35,919		25,886		21,110			18,756
Selling expense	85,102		82,364		73,568		63,293			58,790
General and administrative expense	109,077		100,973		95,820		79,788			75,063
Impairment of goodwill	—		2,346		1,282		6,292			—
Net loss (gain) on disposal of assets	2,038		166		191		(4,769		)	794
Income from operations	81,478		61,709		74,057		78,424			31,496
Income (loss) in equity method investment, before tax	—		—		4,389		(535		)	(194		)
Interest income, net	86		212		340		148			175
Income from continuing operations before income taxes	81,564		61,921		78,786		78,037			31,477
Provision for income taxes from continuing operations	30,593		20,003		27,886		33,239			17,356
Income from continuing operations, net of tax	50,971		41,918		50,900		44,798			14,121
Discontinued operations:
Loss from discontinued operations	—		—		—		(23,419		)	(2,986		)
Benefit from income taxes from discontinued operations	—		—		—		(7,207		)	(1,082		)
Loss from discontinued operations, net of tax	—		—		—		(16,212		)	(1,904		)
Net income	$	50,971	$	41,918	$	50,900	$	28,586		$	12,217
Earnings (loss) per share of common stock:
Basic
Continuing operations	$	1.05	$	0.87	$	1.04	$	0.91		$	0.29
Discontinued operations	—		—		—		(0.33		)	(0.04		)
Net income	1.05		0.87		1.04		0.58			0.25
Diluted
Continuing operations	$	1.05	$	0.87	$	1.04	$	0.90		$	0.29
Discontinued operations	—		—		—		(0.33		)	(0.04		)
Net income	1.05		0.87		1.04		0.58			0.25
Cash dividends declared per share of common stock	$	0.375	$	0.625	$	0.50	$	0.40		$	0.40

(in thousands)

	December 31,
	2013		2012		2011		2010		2009
Balance Sheet Data:
Working capital	$	464,901	$	402,538	$	430,476	$	511,640	$	458,607
Property, plant and equipment, net	209,533		213,452		195,716		177,072		187,814
Goodwill	129,218		121,981		99,849		70,069		81,626
Total assets	953,613		890,322		836,087		874,709		843,805
Line of credit and long-term debt, including current portion	103		178		—		—		—
Total liabilities	112,334		100,754		77,724		86,916		80,021
Total stockholders’ equity	841,279		789,568		758,363		787,793		763,784

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

This document contains forward-looking statements, based on numerous assumptions and subject to risks and uncertainties, such as statements regarding sales, gross profit margin, stock-based compensation, capital expenditures, amortization or effective tax rates at any future time or for any future period. Although the Company believes that the forward-looking statements are reasonable, it does not and cannot give any assurance that its beliefs and expectations will prove to be correct. Many factors could significantly affect the Company’s operations and cause the Company’s actual results to be substantially different from the Company’s expectations. See “Item 1A - Risk Factors.” Actual results might differ materially from results suggested by any forward-looking statements in this report. The Company does not have an obligation to publicly update any forward-looking statements, whether as a result of the receipt of new information, the occurrence of future events or otherwise.

The following is a discussion and analysis of the consolidated financial condition and results of operations, unless stated otherwise, for the Company for the years ended December 31, 2013, 2012 and 2011, and of certain factors that may affect the Company’s prospective financial condition and results of operations. The following should be read in conjunction with the Consolidated Financial Statements and related Notes appearing elsewhere herein.

26

Overview

The Company designs, manufactures and sells building construction products that are of high quality and performance, easy to use and cost-effective for customers. It operates in three business segments determined by geographic region; North America, Europe and Asia/Pacific. The North America segment sells both wood and concrete construction products and has been highly dependent on housing starts. The Company has made efforts to be less dependent on new housing construction by expanding its line of concrete construction products. North America concrete construction product sales increased 46% in 2013 from 2011, partly due to recent acquisitions. The Europe segment also sells both wood and concrete construction products and until recently relied primarily on wood construction products. Europe concrete constructions products sales increased over 100% in 2013 from 2011, primarily due to recent acquisitions, partly offset by the loss of sales from exiting the heavy-duty mechanical anchor market. The Asia/Pacific segment also sells both wood and concrete construction products with concrete construction product sales increasing over 100% in 2013 from 2011.

The Company continues to invest in its strategic initiatives, such as expanding its offering of concrete construction products, specialty chemicals and wood construction products, particularly truss plate and software offerings. In support of these initiatives, the Company expects to hire additional personnel and commit additional resources in 2014.

The Company generally manufactures products and incurs costs in the areas where sales occur. Therefore, for each of the Company’s foreign operations the local currency is the functional currency and each foreign operation transacts primarily in its functional currency. The Company does not currently plan to enter into foreign currency contracts to hedge its exposure to foreign exchange rates.

The Administrative & All Other segment primarily includes expenses such as self-insured workers compensation claims for employees of the Company’s venting business, which was sold in 2010, stock-based compensation for certain members of management, interest expense, foreign exchange gains or losses and income tax expense, as well as revenues and expenses related to real estate activities, such as rental income and depreciation expense on the Company’s facility in Vacaville, California, which the Company has leased to a third party for a 10-year term expiring in August 2020.

From 2013 to 2011, net sales increased to $706.3 million from $603.4 million. The Company had net income of $51.0 million for 2013 compared to net income of $50.9 million for 2011. Diluted net income per common share was $1.05 for 2013 compared to diluted net income of $1.04 per common share for 2011. Income from operations increased 10.0% to $81.5 million in 2013 from $74.1 million in 2011.

Net sales

Net sales increased to $706.3 million in 2013 from $603.4 million in 2011, reflecting improved economic conditions primarily in North America.

·Segment net sales:

·North America — Net sales increased to $572.8 million in 2013 from $474.7 million in 2011 with increases in all regions of the United States and an above-average rate of increase in the southeast region of the country. Net sales increases in North America were mostly due to an increase in sales volume and partly due to the acquisitions of:

·The assets of Fox Industries, Inc. (“Fox Industries”), a Maryland company, in December 2011:

·The assets of Automatic Stamping, LLC and Automatic Stamping Auxiliary Services, LLC, both North Carolina limited liability companies (collectively “Automatic Stamping”), in December 2011; and

·The TJ® Shear Brace (“Shear Brace”) product line in February 2013.

·Europe — Net sales decreased to $117.8 million in 2013 from $118.2 million 2011, mostly due to exiting the heavy-duty mechanical anchor business and lower sales volumes due to a slowing economy, partly offset by the acquisitions of S&P Clever Reinforcement AG and S&P Clever International AG, both companies incorporated under the laws of Switzerland (collectively “S&P Clever”), in January 2012.

·Asia/Pacific — Net sales increased to $14.8 million in 2013 from $9.5 million 2011 partly due to new sales offices operating in New Zealand, South Africa and Thailand and the expansion of the concrete construction product line.

27

·Sales channels and products groups:

·Net sales to contractor distributors and lumber dealers increased significantly, while home center sales in 2013 decreased from 2011, due to the loss of Lowe’s as a customer in the second quarter of 2012. Lowe’s accounted for $25.0 million in net sales in 2011. Excluding Lowe’s, net sales to home centers increased 5.5% in 2013 compared to 2011.

·The Home Depot exceeded 10% of the Company’s net sales in the years ended December 31, 2012 and 2011 (see “Item 1A — Risk Factors” and Note 14 to the Company’s Consolidated Financial Statements).

Gross profit

Gross profit margin decreased from 44.9% in 2011 to 44.5% in 2013. Wood construction products represented 85% of total sales in 2013, down from 89% of total sales in 2011. The overall 2013 gross profit margin was down slightly due to increased sales of concrete construction products, which have lower profit margins as compared to wood construction products. The gross profit margin differential between wood construction products and concrete construction products narrowed from 15% in 2011 to 13% in 2013.

Operating expenses

Operating expenses increased to $233.1 million, or 33.0% of sales, in 2013 from $196.7 million, or 32.6% of sales, in 2011, primarily due to product line expansion related to acquisitions, which increased the number of employees, research and development expenses, sales and marketing expenses and depreciation and amortization expenses.

Retailers and distributors have consolidated over time, both providing opportunities for growth and exposing Simpson Strong-Tie to potential over-dependence with the increasing size and importance of individual customers. The loss of any of the larger home centers and distributors as customers would have a material adverse effect on SST, unless and until either such customers are replaced or SST makes the necessary adjustments (if possible) to compensate for the loss of business.

Stock-Based Compensation

The Company’s 2014 budget includes approximately $9.4 million in pre-tax stock-based compensation expense for stock option and restricted stock units awarded in 2011 through 2014. This amount does not include the service inception charge for restricted stock units, if any, that may be awarded in 2015.

Results of Operations

The following table sets forth, for the years indicated, the percentage of net sales of specified items in the Company’s Consolidated Statements of Operations.

	Years Ended December 31,
	2013		2012		2011
Net sales	100.0	%	100.0	%	100.0	%
Cost of sales	55.5	%	56.9	%	55.1	%
Gross profit	44.5	%	43.1	%	44.9	%
Research and development and other engineering	5.2	%	5.5	%	4.3	%
Selling expense	12.0	%	12.5	%	12.2	%
General and administrative expense	15.4	%	15.4	%	15.9	%
Impairment of goodwill	—		0.4	%	0.2	%
Net loss on disposal of assets	0.3	%	—		—
Income from operations	11.5	%	9.4	%	12.3	%
Income in equity method investment	—		—		0.7	%
Interest income, net	—		—		0.1	%
Income before taxes	11.5	%	9.4	%	13.1	%
Provision for income taxes	4.3	%	3.0	%	4.6	%
Net income	7.2	%	6.4	%	8.4	%

28

Comparison of the Years Ended December 31, 2013 and 2012

Net sales increased 7.5% to $706.3 million for 2013 from $657.2 million for 2012. The Company had net income of $51.0 million for 2013 compared to net income of $41.9 million for 2012. Diluted net income per common share was $1.05 for 2013 compared to diluted net income of $0.87 per common share for 2012. Income from operations increased 32.0% to $81.5 million in 2013 from $61.7 million in 2012. The following table shows the change in the Company’s operations from 2012 to 2013, and the increases or decreases for each category by segment.

(in thousands)

			Increase (Decrease) in Operating Segment
			North						Asia/			Admin &
	2012		America			Europe			Pacific			All Other			2013
Net sales	$	657,236	$	49,894		$	(4,750	)	$	3,949		$	—		$	706,329
Cost of sales	373,759		25,658			(10,568		)	2,710			232			391,791
Gross profit	283,477		24,236			5,818			1,239			(232		)	314,538
Research and development and other engineering expense	35,919		1,038			(826		)	730			(18		)	36,843
Selling expense	82,364		2,710			(834		)	916			(54		)	85,102
General and administrative expense	100,973		8,656			(94		)	(984		)	526			109,077
Impairment of goodwill	2,346		—			(2,346		)	—			—			—
Loss on sale of assets	166		(1,467		)	564			(20		)	2,795			2,038
Income from operations	61,709		13,299			9,353			597			(3,480		)	81,478
Interest income, net	212		49			81			(53		)	(203		)	86
Income before income taxes	61,921		13,348			9,434			544			(3,683		)	81,564
Provision for income taxes	20,003		11,335			(638		)	(424		)	317			30,593
Net income	$	41,918	$	2,013		$	10,072		$	968		$	(4,000	)	$	50,971

Net Sales

The following table shows net sales by segment for the years ended December 31, 2012 and 2013:

(in thousands)

	North						Asia/			Admin &
	America			Europe			Pacific			All Other			Total
December 31, 2012	$	522,895		$	122,549		$	10,844		$	948		$	657,236
December 31, 2013	572,789			117,799			14,793			948			706,329
Increase (decrease)	$	49,894		$	(4,750	)	$	3,949		$	—		$	49,093
Percentage increase (decrease)	9.5		%	(3.9		)%	36.4		%	0.0		%	7.5		%

The following table shows segment net sales as percentages of total net sales for the years ended December 31, 2012 and 2013:

	North				Asia/		Admin &
	America		Europe		Pacific		All Other		Total
Percentage of total 2012 net sales	79.6	%	18.6	%	1.7	%	0.1	%	100.0	%
Percentage of total 2013 net sales	81.1	%	16.7	%	2.1	%	0.1	%	100.0	%

·Segment net sales:

·North America — The 9.5% increase in net sales accounted for all of the overall increase and resulted from increased sales volume, including from the acquisitions of Fox Industries and Automatic Stamping, while average prices for the year were down 2.3%.

·Europe — The 3.9% decrease in net sales resulted from the Company exiting the heavy-duty mechanical anchor business, reduced sales volumes due to difficult economic conditions and a slight price decrease, partly offset by the acquisition of S&P Clever. Europe net sales were not materially affected by currency translations.

·Asia/Pacific — Net sales in the Asia/Pacific segment, although relatively small, have increased as the Company has continued expanding its presence in the region and with additional concrete construction product sales. Asia/Pacific net sales were not materially affected by currency translations.

29

·Consolidated net sales channels and product groups:

·Net sales to contractor distributors, dealer distributors and lumber dealers increased in 2013, compared to 2012, while net sales to home centers decreased, partly as a result of the loss of Lowe’s as a customer in the second quarter of 2012. Lowe’s accounted for $11.7 million in net sales in 2012.

·Excluding Lowe’s, net sales to home centers decreased 4% in 2013, compared to 2012, while net sales to the Company’s largest customer decreased slightly in 2013, compared to 2012.

·Wood construction product sales represented 85% of total Company sales in both 2013 and 2012.

·Concrete construction product sales represented 15% of total Company sales in both 2013 and 2012.

Gross Profit

The following table shows gross profit by segment for the years ended December 31, 2012 and 2013:

(in thousands)

	North						Asia/			Admin &
	America			Europe			Pacific			All Other			Total
December 31, 2012	$	243,242		$	37,844		$	1,481		$	910		$	283,477
December 31, 2013	267,478			43,662			2,720			678			314,538
Increase (decrease)	$	24,236		$	5,818		$	1,239		$	(232	)	$	31,061
Percentage increase (decrease)	10.0		%	15.4		%	83.7		%	NM			11.0		%

The following table shows gross profit percentages by segment for the years ended December 31, 2012 and 2013:

	North				Asia/		Admin &
	America		Europe		Pacific		All Other	Total
2012 gross profit percentage	46.5	%	30.9	%	13.7	%	NM	43.1	%
2013 gross profit percentage	46.7	%	37.1	%	18.4	%	NM	44.5	%

Gross profit increased to $314.5 million in 2013 from $283.5 million in 2012. Gross profit as a percentage of net sales increased to 44.5% in 2013 from 43.1% in 2012. Based on current information, the Company estimates that its full year 2014 gross profit margin will be between 44% and 45%.

·North America — Gross profit margin increased slightly to 46.7% in 2013 from 46.5% in 2012, due to lower material costs as a percentage of sales. Concrete construction product sales, which have a lower gross profit margin than wood construction product sales, were 13% of North America sales in each of 2013 and 2012.

·Europe — Gross profit margin increased to 37.1% in 2013 from 30.9% in 2012, as a result of decreases in all elements of costs of sales as a percentage of sales, primarily due to exiting the lower-margin heavy-duty mechanical anchor business in 2012, which included $2.3 million in severance expense, $1.0 million loss on the liquidation of inventory and $0.2 million in accelerated depreciation expense.

·Product mix — The gross profit margin differential between wood construction products and concrete construction products decreased from 17% in 2012 to 13% in 2013, primarily due to reduced concrete construction product costs due to exiting the heavy-duty mechanical anchor business.

·Steel prices — Steel prices have increased from a May 2013 low. Based on current estimates, the Company expects steel prices to remain relatively stable during the first quarter of 2014.

Research and development and engineering expense

Research and development and engineering expense increased 2.6% to $36.8 million in 2013 from $35.9 million in 2012, primarily due to increases of $5.2 million in personnel costs from hiring an in-house software development team, $0.9 million in cash profit sharing, $0.6 million in depreciation expense, $0.3 million in stock-based compensation and $0.3 million in communication and computer expense, partly offset by a decrease of $6.4 million in professional fees that resulted from replacing a third-party development company contracted by the Company in 2012 with the in-house software development team.

30

·North America — Research and development and engineering expense increased $1.0 million primarily due to increases of $4.5 million in personnel costs from hiring an in-house software development team, $0.8 million in cash profit sharing, $0.3 million in each of stock-based compensation, depreciation expense and communication and computer expense, mostly offset by a decrease of $5.9 million in professional fees, primarily due to replacing a third-party development company contracted by the Company in 2012 with the in-house software development team.

·Europe — Research and development and engineering expense decreased $0.8 million, primarily due to exiting the heavy-duty mechanical anchor business in 2012, which had research and development and engineering expense of $0.8 million in 2012.

Selling expense

Selling expense increased 3.3% to $85.1 million in 2013 from $82.4 million in 2012, primarily due to increases of $1.4 million in cash profit sharing and commissions, $0.8 million in stock-based compensation and $0.5 million in professional fees.

·North America — Selling expense increased $2.7 million, primarily due to increases of $0.9 million in cash profit sharing and commissions, $0.7 million in stock-based compensation, $0.6 million in personnel costs (mostly from additional sales representatives in support of new businesses acquired in 2011 and 2012 and increased pay rates) and $0.5 million in professional fees.

·Europe — Selling expense decreased $0.8 million, primarily due to exiting the heavy-duty mechanical anchor business in 2012, which had selling expense of $1.2 million in 2012.

General and administrative expense

General and administrative expense increased 8.0% to $109.1 million in 2013 from $101.0 million in 2012, primarily due to increases of $3.6 million in cash profit sharing, $3.3 million in personnel costs, $0.7 million in stock-based compensation, $0.6 million in communication and computer expense, $0.6 million in depreciation expense, as well as $0.4 million in net losses on foreign currency translations and $0.2 million in impairment expense associated with the Company’s real estate in Ireland. These changes were partly offset by decreases of $1.0 million in legal and professional fees, $0.5 million in bad debt expense and $0.4 million in amortization expense.

·North America — General and administrative expense increased $8.7 million, primarily due to increases of $3.3 million in personnel costs due to the addition of administrative and information technology staff and pay rate increases instituted in January 2013, $2.6 million in cash profit sharing, $0.7 million in communication expense, $0.6 million in depreciation expense and computer expense, $0.4 million in amortization expense and $0.2 million in each of stock-based compensation and net losses on foreign currency activity, partly offset by decreases of $0.5 million in impairment, $0.4 million in bad debt expense and $0.2 million in legal and professional fees.

·Europe — General and administrative expense decreased $0.1 million, primarily due to decreases of $0.9 million in amortization expense and $0.2 million in legal and professional fees and increased gains of $0.6 million in foreign currency activity, partly offset by a $0.7 million in impairment in the first quarter of 2013 associated with the Company’s real estate in Ireland and increases of $0.4 million in each of cash profit sharing and stock-based compensation.

·Admin & All Other — General and administrative expense increased $0.5 million, primarily due to an increase of $0.6 million in cash profit sharing, $0.4 million in foreign currency translation losses and $0.2 million in stock-based compensation, partly offset by a decrease of $0.6 million in legal and professional fees.

Impairment of Goodwill

The impairment charge of $2.3 million taken in 2012 resulting from the Company’s annual impairment test in the fourth quarter of 2012 was associated with assets in Germany that were acquired in 2002 and 2008 and with the Germany reporting unit. The Germany reporting unit’s carrying value, including goodwill, exceeded the fair value, primarily due to reduced future expected net cash flows from weakening profit margins due to European economic conditions, specifically in Germany. The goodwill associated with the Germany reporting unit was fully impaired, other than the provisional allocation related to the acquisition of Bierbach. The method to determine the fair value of the Germany reporting unit was a discounted cash flow model. The Company’s 2013 annual goodwill impairment analysis did not result in an impairment of goodwill. See “Critical Accounting Policies and Estimates — Goodwill Impairment Testing.”

31

Disposal of assets

The net loss of $2.0 million on disposal of assets for 2013 included the $0.7 million loss on the third quarter 2013 sale of the Ireland facility recorded in the Europe segment, the $1.4 million gain on the fourth quarter 2013 sale of the CarbonWrap product line recorded in the North America segment and the $2.8 million loss on the fourth quarter 2013 release of the cumulative translation adjustment from accumulated other income related to the Company’s Irish subsidiary recorded in the Administration & All Other segment.

Provision for Income Taxes

The effective income tax rate increased from 32.3% in 2012 to 37.5% in 2013. The 2012 effective tax rate included the realization of a $9.9 million tax benefit resulting from the worthless stock deduction for the Company’s investment in its Irish subsidiary in the fourth quarter of 2012, partly offset by $2.3 million in non-deductible acquisition costs and valuation allowances taken on operating losses in the Europe and Asia/Pacific segments. The 2013 effective tax rate was lower than estimated due to better-than-expected operating results in the Europe and Asia/Pacific segments. Based on current information and subject to future events and circumstances, the Company estimates that its 2014 effective tax rate will be between 37% and 39%.

Comparison of the Years Ended December 31, 2012 and 2011

Net sales increased 2.6% to $657.2 million for 2012 from $603.4 million for 2011. Net income decreased 17.9% from $50.9 million in 2011 to $41.9 million in 2012. Diluted net income per common share was $0.87 for 2012 compared to diluted net income of $1.04 per common share for 2011. Income from operations decreased 16.7% from $74.1 million in 2011 to $61.7 million in 2012. The following table shows the change in the Company’s operations from 2011 to 2012, and the increases or decreases for each category by segment.

(in thousands)

			Increase (Decrease) in Operating Segment
			North						Asia/			Admin &
	2011		America			Europe			Pacific			All Other			2012
Net sales	$	603,446	$	48,173		$	4,303		$	1,315		$	(1	)	$	657,236
Cost of sales	332,642		36,431			5,020			501			(835		)	373,759
Gross profit	270,804		11,742			(717		)	814			834			283,477
Research and development and other engineering expense	25,886		10,280			(226		)	11			(32		)	35,919
Selling expense	73,568		8,075			136			784			(199		)	82,364
General and administrative expense	95,820		(2,829		)	7,707			1,345			(1,070		)	100,973
Impairment of goodwill	1,282		—			1,064			—			—			2,346
Loss on sale of assets	191		(20		)	(7		)	2			—			166
Income from operations	74,057		(3,764		)	(9,391		)	(1,328		)	2,135			61,709
Income in equity method investment, before tax	4,389		(4,389		)	—			—			—			—
Interest income, net	340		(79		)	110			21			(180		)	212
Income before taxes	78,786		(8,232		)	(9,281		)	(1,307		)	1,955			61,921
Provision for income taxes	27,886		(10,311		)	956			1,128			344			20,003
Net income	$	50,900	$	2,079		$	(10,237	)	$	(2,435	)	$	1,611		$	41,918

32

Net Sales

The following table shows net sales by segment for the years ended December 31, 2011 and 2012:

(in thousands)

	North						Asia/			Admin &
	America			Europe			Pacific			All Other			Total
December 31, 2011	$	474,722		$	118,246		$	9,528		$	950		$	603,446
December 31, 2012	522,895			122,549			10,843			949			657,236
Increase (decrease)	$	48,173		$	4,303		$	1,315		$	(1	)	$	53,790
Percentage increase (decrease)	10.1		%	3.6		%	13.8		%	(0.1		%)	8.9		%

The following table shows segment net sales as percentages of total net sales for the years ended December 31, 2011 and 2012:

	North				Asia/		Admin &
	America		Europe		Pacific		All Other		Total
Percentage of total 2011 net sales	78.7	%	19.6	%	1.6	%	0.1	%	100.0	%
Percentage of total 2012 net sales	79.6	%	18.6	%	1.7	%	0.1	%	100.0	%

·Segment net sales:

·North America — The 10.1% increase in net sales accounted for 89.6% of the overall increase and resulted from increased sales volume and the acquisitions of Fox Industries and Automatic Stamping, while average prices for the year were flat.

·Europe — The 3.6% increase in net sales accounted for 8.0% of the overall increase and resulted from the acquisition of S&P Clever and a slight price increase, partly offset by reduced sales volumes due to difficult economic conditions and unfavorable currency translations of approximately $5.8 million.

·Asia/Pacific — Net sales, although relatively small, have increased as the Company continued expanding its presence in the region. Asia/Pacific net sales were not materially affected by currency translations.

·Consolidated net sales channels and product groups:

·Net sales to contractor distributors and lumber dealers increased in 2012, compared to 2011, while net sales to home centers decreased, partly as a result of the loss of Lowe’s as a customer in the second quarter of 2012. Lowe’s accounted for $11.7 million in net sales in 2012 compared to $25.0 million in 2011.

·Excluding Lowe’s, net sales to home centers increased 9.6% in 2012 compared to 2011, while net sales to the Company’s largest customer increased 9.0%.

·Wood construction product sales, including connectors, truss plates, fastening systems, fasteners and shearwalls, represented 85% of total Company sales in 2012, down from 89% in 2011.

·Concrete construction product sales, including adhesives, chemicals, mechanical anchors, powder actuated tools and reinforcing fiber materials, as a percentage of total sales were 15% in 2012 and 11% in 2011.

Gross Profit

The following table shows gross profit by segment for the years ended December 31, 2011 and 2012:

(in thousands)

	North						Asia/			Admin &
	America			Europe			Pacific			All Other		Total
December 31, 2011	$	231,499		$	38,561		$	667		$	77	$	270,804
December 31, 2012	243,242			37,844			1,481			910		283,477
Increase (decrease)	$	11,743		$	(717	)	$	814		$	833	$	12,673
Percentage increase (decrease)	5.1		%	(1.9		%)	122.0		%	NM		4.7		%

33

The following table shows gross profit percentages by segment for the years ended December 31, 2011 and 2012:

	North				Asia/		Admin &
	America		Europe		Pacific		All Other	Total
2011 gross profit percentage	48.8	%	32.6	%	7.0	%	NM	44.9	%
2012 gross profit percentage	46.5	%	30.9	%	13.7	%	NM	43.1	%

The overall 2012 gross profit margins were negatively affected by increased sales of concrete construction products, which have lower profit margins. The gross profit margin differential between wood construction products and concrete construction products increased from 15% in 2011 to 17% in 2012.

·North America — The North America segment accounted for 92.7% of the overall increase in gross profit with wood construction products representing 87% of the North America segment’s net sales in 2012, down from 89% in 2011. The decreased gross profit margin was due primarily to higher material costs as a percentage of net sales, increased concrete construction product sales, which have a lower gross profit margin than wood construction product sales, and greater price competition.

·Europe - Wood construction product sales represented 80% of the Europe segment’s net sales in 2012, down from 92% in 2011. The decreased gross profit margin was primarily due to charges resulting from the decision to discontinue manufacturing heavy-duty mechanical anchors made at the Company’s facility in Ireland and selling those products in Europe. The charges related to the closure of the Irish facility and discontinuing the sale of heavy-duty anchor products in the Europe segment. The charges included severance costs of $2.3 million, loss on sale of inventory of $1.0 million and accelerated depreciation of $0.2 million.

Research and Development and Other Engineering Expense

Research and development and other engineering expense increased 38.8% to $35.9 million in 2012 from $25.9 million in 2011. The increase was primarily due to additional professional fees of $6.5 million for truss software development, personnel costs of $2.4 million for additional employees and pay rate increases and stock-based compensation of $0.4 million.

·North America — Research and development and other engineering expense increased $10.3 million, including professional fees of $6.7 million and personnel costs of $2.3 million.

·None of the changes in the other segments was individually material.

Selling Expense

Selling expense increased 12.0% to $82.4 million in 2012 from $73.6 million in 2011. The increase was primarily due to additional personnel costs of $5.0 million, resulting from the recent North American and European acquisitions and expansion in the Asia/Pacific segment, additional employees, increased pay rates and stock-based compensation of $1.3 million, legal and professional fees of $1.2 million and promotional costs of $1.1 million.

·North America — Selling expense increased $8.1 million, including increases in personnel costs of $3.8 million, stock-based compensation of $1.3 million, promotional costs of $1.1 million and professional fees of $1.0 million.

·Asia/Pacific — Selling expense increased $0.8 million, including an increase of $0.7 million in personnel costs.

General and Administrative Expense

General and administrative expense increased 5.4% to $101.0 million in 2012 from $95.8 million in 2011. Personnel costs increased $4.3 million primarily due to the European acquisition and expansion in the Asia/Pacific segment, additional employees and an increase in pay rates. Amortization expense increased $3.3 million and depreciation expense increased $1.5 million, primarily due to acquisitions in both North America and Europe. The remaining increases in general and administrative expenses included $1.3 million in stock-based compensation and $0.7 million in computer hardware, software and support. These increases were partly offset by a net decrease in professional and legal fees of $5.3 million, although professional and legal fees increased by $1.3 million in the Europe segment due to the 2012 acquisition and the closure of the Ireland facility, and a decrease in cash profit sharing of $2.2 million due to lower operating income.

34

·North America — General and administrative expense decreased $2.8 million, including decreases in professional and legal fees of $6.6 million and cash profit sharing of $1.1 million, partly offset by increases in depreciation expense of $1.6 million, amortization expense of $1.1 million, personnel costs of $0.7 million, computer hardware, software and support of $0.6 million and stock-based compensation of $0.3 million.

·Europe — General and administrative expense increased $7.7 million, including increases in personnel costs of $2.3 million, amortization expense of $1.5 million, professional and legal fees of $1.0 million and stock-based compensation of $0.3 million, partly offset by a decrease in cash profit sharing of $0.2 million. Closure of the Ireland facility also contributed to the increased general and administrative expense attributable to the Europe segment, which included amortization expense of $0.6 million, severance costs of $0.4 million and legal and professional fees of $0.3 million.

·Asia/Pacific — General and administrative expense increased $1.3 million, including increases in personnel costs of $1.1 million and cash profit sharing of $0.1 million.

·Admin & All Other — General and administrative expense decreased $1.1 million, including an increase in stock-based compensation of $0.7 million, offset by decreases in cash profit sharing of $1.0 million and various other items.

Impairment of Goodwill

The impairment charge of $2.3 million taken in 2012, which resulted from the Company’s annual impairment test in the fourth quarter of 2012, was associated with assets in the Germany reporting unit acquired in 2002 and 2008. The Germany reporting unit’s carrying value, including goodwill, exceeded its fair value, primarily due to reduced future expected net cash flows from weakening profit margins due to economic conditions, mainly in Germany. The goodwill associated with the Germany reporting unit is fully impaired. The method to determine the fair value of the Germany reporting unit was a discounted cash flow model. The Company’s 2011 annual goodwill impairment analysis resulted in an impairment charge of $1.3 million associated with the U.K. reporting unit. The Germany and U.K. reporting units are associated with the Europe segment. See “Critical Accounting Policies and Estimates — Goodwill Impairment Testing.”

Provision for Income Taxes

The effective tax rate was 32.3% for 2012. The provision for income tax expense decreased primarily due to the realization of a $9.9 million tax benefit resulting from the worthless stock deduction for the Company’s investment in its Irish subsidiary. The Company also had nondeductible items such as goodwill impairment and foreign losses for which no tax benefit was recorded. Excluding these factors, the effective tax rate would have been approximately 43%. In 2011 the effective tax rate was 35.4% due to improved operations in countries where valuation allowances had been recorded against tax losses and those allowances were released in 2011.

Critical Accounting Policies and Estimates

The critical accounting policies described below affect the Company’s more significant judgments and estimates used in the preparation of the Consolidated Financial Statements. If the Company’s business conditions change or if it uses different assumptions or estimates in the application of these and other accounting policies, the Company’s future results of operations could be adversely affected.

Inventory Valuation

Inventories are stated at the lower of cost or net realizable value (market). Cost includes all costs incurred in bringing each product to its present location and condition, as follows:

·Raw materials and purchased finished goods — principally valued at cost determined on a weighted average basis: and

·In-process products and finished goods — cost of direct materials and labor plus attributable overhead based on a normal level of activity.

The Company applies net realizable value and obsolescence to the gross value of inventory. The Company estimates net realizable value based on estimated selling price less further costs to completion and disposal. The Company impairs slow-moving products by comparing inventories on hand to projected demand. If on-hand supply of a

35

product exceeds projected demand or if the Company believes the product is no longer marketable, the product is considered obsolete inventory. The Company revalues obsolete inventory to its net realizable value. The Company has consistently applied this methodology. The Company believes that this approach is prudent and makes suitable impairments for slow-moving and obsolete inventory. When impairments are established, a new cost basis of the inventory is created. Unexpected change in market demand, building codes or buyer preferences could reduce the rate of inventory turnover and require the Company to recognize more obsolete inventory.

Revenue Recognition

The Company recognizes revenue when the earnings process is complete, net of applicable provision for discounts, returns and incentives, whether actual or estimated, based on the Company’s experience. This generally occurs when products are shipped to the customer in accordance with the sales agreement or purchase order, ownership and risk of loss pass to the customer, collectability is reasonably assured and pricing is fixed or determinable. The Company’s general shipping terms are F.O.B. shipping point, where title is transferred and revenue is recognized when the products are shipped to customers. When the Company sells F.O.B. destination point, title is transferred and the Company recognizes revenue on delivery or customer acceptance, depending on terms of the sales agreement. Service sales, representing after-market repair and maintenance, engineering activities, software license sales and service and lease income, though significantly less than 1% of net sales and not material to the consolidated financial statements, are recognized as the services are completed or the software products and services are delivered. If actual costs of sales returns, incentives and discounts were to significantly exceed the recorded estimated allowance, the Company’s sales would be adversely affected.

Business Combinations

The Company recognizes separately from goodwill the assets acquired and the liabilities assumed at their acquisition date fair values. Goodwill as of the acquisition date is measured as the excess of consideration transferred and the net of the acquisition date fair values of the assets acquired and the liabilities assumed. While the Company uses its best estimates and assumptions as a part of the purchase price allocation process to value assets acquired and liabilities assumed at the acquisition date, the Company’s estimates are inherently uncertain and subject to refinement. As a result, during the measurement period, which may be up to one year from the acquisition date, the Company records adjustments to the assets acquired and liabilities assumed, with the corresponding offset to goodwill. On the conclusion of the measurement period or final determination of the values of assets acquired or liabilities assumed, whichever comes first, the Company records subsequent adjustments, if any, to its consolidated statements of operations.

Accounting for business combinations requires the Company’s management to make significant estimates and assumptions, especially at the acquisition date with respect to intangible assets. Although the Company believes that the assumptions and estimates it has made in the past have been reasonable and appropriate, they are based in part on historical experience and information obtained from the management of the acquired companies and are inherently uncertain.

Examples of critical estimates in valuing certain of the intangible assets that the Company has acquired include:

·Future expected cash flows from customer relationships and acquired unpatented technologies and patents;

·The acquired company’s brand and competitive position and assumptions about the period of time the acquired brand will continue to be used in the combined company’s product portfolio; and

·Discount rates.

Unanticipated events and circumstances may affect the accuracy or validity of such assumptions, estimates or actual results.

For a given acquisition, the Company may identify pre-acquisition contingencies as of the acquisition date and may extend its review and evaluation of these pre-acquisition contingencies throughout the measurement period (up to one year from the acquisition date) to obtain sufficient information to assess whether the Company includes these contingencies as a part of the purchase price allocation and, if so, to determine their estimated amounts.

If the Company determines that a pre-acquisition contingency (that is not income-tax related) is probable and estimable as of the acquisition date, the Company records its best estimate for such a contingency as a part of the preliminary purchase price allocation. The Company often continues to gather information for and evaluate its pre-acquisition contingencies throughout the measurement period. If the Company changes the amounts recorded or identifies additional pre-acquisition contingencies during the measurement period, such amounts are included in the purchase price allocation during the measurement period and, subsequently, in the Company’s results of operations.

36

In addition, the Company estimates uncertain tax positions and tax related valuation allowances assumed in connection with a business combination initially as of the acquisition date. The Company reevaluates these items quarterly with any adjustments to its preliminary estimates being recorded to goodwill if the Company is within the measurement period. The Company continues to collect information to determine estimated values. Subsequent to the measurement period or the Company’s final determination of the uncertain tax positions estimated value or tax-related valuation allowances, whichever comes first, changes to these uncertain tax positions and tax-related valuation allowances will affect the Company’s provision for income taxes in its consolidated statement of operations and could have a material effect on the Company’s results of operations and financial position.

Goodwill Impairment Testing

The Company tests goodwill for impairment at the reporting unit level on an annual basis (in the fourth quarter for the Company). The Company also reviews goodwill for impairment whenever events or changes in circumstances indicate the carrying value of an asset may not be recoverable. These events or circumstances could include a significant change in the business climate, legal factors, operating performance indicators, competition, or disposition or relocation of a significant portion of a reporting unit.

The reporting unit level is generally one level below the operating segment, which is at the country level, except in the United States and Australia and except for S&P Clever.

The Company determined that the United States reporting unit includes four components: Northwest United States, Southwest United States, Northeast United States and Southeast United States (collectively the “U.S. Components”). The Company aggregates the U.S. Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the U.S. Components working in concert. The U.S. Components are economically similar because of a number of factors, including selling similar products to shared customers and sharing assets and services such as intellectual property, manufacturing assets for certain products, research and development projects, manufacturing processes, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the U.S. Components level and costs are allocated among the four U.S. Components.

The Company determined that the Australia reporting unit includes three components: Australia, New Zealand and South Africa (collectively the “AU Components”). The Company aggregates the AU Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the AU Components working in concert. The AU Components are economically similar because of a number of factors, including that New Zealand and South Africa operate as extensions of their Australian parent company selling similar products and sharing assets and services such as intellectual property, manufacturing assets for certain products, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the AU Components level and costs are allocated among the AU Components.

The Company determined that the S&P Clever reporting unit includes seven components: S&P Switzerland, S&P Poland, S&P Austria, S&P The Netherlands, S&P Portugal, S&P Germany and S&P France (collectively the S&P Components”). The Company aggregates the S&P Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the S&P Components working in concert. The S&P Components are economically similar because of a number of factors, including sharing assets and services such as intellectual property, manufacturing assets for certain products, research and development projects, manufacturing processes, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the S&P Components level and costs are allocated among the S&P Components.

The Company determined that the Denmark reporting unit includes two components: Denmark and Poland (collectively the “DK Components”). The Company aggregates the DK Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the DK Components working in concert. The DK Components are economically similar because of a number of factors, including that Poland sells similar products and shares assets, such as intellectual property, manufacturing assets for certain products and management of inventory excesses and shortages.

For certain reporting units, the Company may first assess qualitative factors related to the goodwill of the reporting unit to determine whether it is necessary to perform a two-step impairment test. If the Company judges that it is more likely than not that the fair value of the reporting unit is greater than the carrying amount of the reporting unit, including goodwill, no further testing is required. If the Company judges that it is more likely than not that the fair

37

value of the reporting unit is less than the carrying amount of the reporting unit, including goodwill, management will perform a two-step impairment test on goodwill. In the first step, management compares the fair value of the reporting unit to its carrying value. The fair value calculation uses a discounted cash flow model and may be supplemented by market approaches if information is readily available. If the Company judges that the carrying value of the net assets assigned to the reporting unit, including goodwill, exceeds the fair value of the reporting unit, a second step of the impairment test must be performed to determine the implied fair value of the reporting unit’s goodwill. If the Company judges that the carrying value of a reporting unit’s goodwill exceeds its implied fair value, the Company would record an impairment charge equal to the difference between the implied fair value of the goodwill and the carrying value.

Determining the fair value of a reporting unit or an indefinite-lived purchased intangible asset is a judgment involving significant estimates and assumptions. These estimates and assumptions include revenue growth rates, operating margins and working capital requirements used to calculate projected future cash flows, risk-adjusted discount rates, and future economic and market conditions (Level 3 fair value inputs). The Company bases its fair value estimates on assumptions that it believes to be reasonable, but that are unpredictable and inherently uncertain. Actual future results may differ from those estimates.

Assumptions about a reporting unit’s operating performance in the first year of the discounted cash flow model used to determine whether or not the goodwill related to that reporting unit is impaired are derived from the Company’s budget. The fair value model considers such factors as macro-economic conditions, revenue and expense forecasts, product line changes, material, labor and overhead costs, tax rates, working capital levels and competitive environment. Future estimates, however derived, are inherently uncertain but the Company believes that this is the most appropriate source on which to base its estimates.

The Company uses these parameters only to provide a basis for the determination of whether or not the goodwill related to a reporting unit is impaired. No inference whatsoever should be drawn from these parameters about the Company’s future financial performance and they should not be taken as projections or guidance of any kind.

The impairment charge taken in 2012 resulting from the Company’s annual impairment test in the fourth quarter of 2012 was associated with assets in the Germany reporting unit that were acquired in 2002 and 2008. The Germany reporting unit’s carrying value, including goodwill, exceeded the fair value, primarily due to reduced future expected net cash flows from weakening profit margins due to European economic conditions, specifically in Germany. The goodwill associated with the Germany reporting unit was fully impaired. The impairment charge taken in 2011 resulting from the Company’s annual impairment test was associated with assets in England that were acquired in 1999 and with the Company’s U.K. reporting unit. The U.K. reporting unit’s carrying value, including goodwill, exceeded the fair value, primarily due to reduced future expected net cash flows from weakening profit margins due to economic conditions. The method to determine the fair value of the Germany and U.K. reporting units were discounted cash flow models. At December 31, 2012, the balance of goodwill of the Germany and U.K. reporting units were fully impaired. These reporting units are associated with the Europe segment.

The Company’s S&P Clever reporting unit passed step one of the annual 2013 impairment test by a 9% margin indicating an estimated value greater than its net book value. The S&P Clever reporting unit is sensitive to management’s plans for increasing sales, margins and cash flows by expanding its sales into France and eventually into other European countries and selling into the Company’s Asia/Pacific segment, as well as the release of new products. The S&P Clever reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the S&P Clever reporting unit’s goodwill, which was $19.0 million at December 31, 2013.

The Company’s France reporting unit passed step one of the annual 2013 impairment test by a 10% margin. The France reporting unit is highly sensitive to management’s plans for increasing sales at or slightly above inflation in a recovering European economy, while maintaining operating margins and increasing cash flows. The France reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the France reporting unit’s goodwill, which was $14.9 million at December 31, 2013.

The Company’s Australia reporting unit passed step one of the annual 2013 impairment test by a 4% margin. The Australia reporting unit is highly sensitive to management’s plans for increasing sales, margins and cash flows by expanding activities in Australia, New Zealand and South Africa. The Australia reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the Australia reporting unit’s goodwill, which was $1.7 million at December 31, 2013.

38

Key Assumptions Used in the Annual Goodwill Impairment Testing

Key assumptions used in the annual goodwill impairment test (“Step 1”) using discounted cash flow models for the Company’s reporting units included compound annual growth rates (“CAGR”) and average annual pre-tax operating margins during the forecast period, and discount rates. Sensitivity assessment of key assumptions for the reporting unit annual impairment tests are presented in the table below for reporting units that passed Step 1 with a margin of 10% or less. The margin by which the reporting units passed the annual goodwill impairment test is noted in the table below.

							Pre-Tax
	Step 1		Discount				Operating
	Pass		Rate (1)		CAGR (2)		Margin (3)
	Margin		Increases		Decreases		Decreases
S&P Clever	9	%	7	%	6	%	10	%
France	10	%	13	%	19	%	15	%
Australia	4	%	2	%	2	%	6	%

(1)Hypothetical percentage increases noted in the discount rates, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values, and thus it would not result in the reporting unit failing Step 1 of the goodwill impairment test.

(2)Hypothetical percentage decreases noted in the CAGR, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values.

(3)Hypothetical annual average percentage decreases noted in average annual pre-tax operating margins, holding all other assumptions constant, would not have decreased the fair value of the reporting units below their carrying values.

Effect of New Accounting Standards

Recent authoritative guidance issued by the FASB (including technical corrections to the ASC), the American Institute of Certified Public Accountants, and the Securities and Exchange Commission did not or is not expected to have a material effect on the Company’s consolidated financial statements.

Liquidity and Sources of Capital

The Company’s liquidity needs arise principally from working capital requirements, capital expenditures and business acquisitions. During the three years ended December 31, 2013, the Company relied on internally generated funds to finance these needs. The Company’s working capital requirements are seasonal with the highest need typically occurring in the second and third quarters of the year. Cash and cash equivalents were $251.2 million and $175.6 million at December 31, 2013 and 2012, respectively. Working capital was $464.9 million and $402.5 million at December 31, 2013 and 2012, respectively. As of December 31, 2013, the Company had borrowings of $0.1 million on a revolving line of credit. The Company had unused capacity on this and other credit facilities of $304.4 million.

As of December 31, 2013, the Company’s investments consisted of only United States Treasury securities and money market funds aggregating $117.6 million. Cash collected by the Company’s United States subsidiaries is routinely transferred into cash management accounts which typically do not have restrictions on withdrawals. As of December 31, 2013, the Company had $96.4 million or 38.4% of its cash and cash equivalents held outside the United States in accounts belonging to several of the Company’s foreign operating entities. The majority of this balance is held in foreign currencies and could be subject to additional taxation if it were repatriated to the United States. The Company has no plans to repatriate cash and cash equivalents held outside the United States as such funds are expected to be used to fund future international growth and acquisitions.

The Company’s operating activities provided $106.5 million, $68.1 million and $35.1 million in net cash in 2013, 2012 and 2011, respectively. In 2013, cash was provided by net income of $51.0 million, noncash expenses totaling $41.3 million, primarily depreciation, amortization, stock-based compensation charges and impairment of assets, a decrease in inventories of $8.5 million and increases in income taxes payable of $4.6 million, accrued profit sharing and commissions of $2.6 million and accrued liabilities of $2.1 million. These increases were offset by increases in trade accounts receivable of $6.7 million and decreases in accounts payable of $2.7 million and other long-term liabilities of $1.0 million. The Company’s inventories decreased 3.1% from $204.1 million at December 31, 2012, to $197.7 million at December 31, 2013, primarily due to decreases in raw materials, partly offset by increases in in-process and finished goods. The balance of the cash provided resulted from changes in other asset and liability accounts, none of which was individually material.

In 2012, cash was provided by net income of $41.9 million, noncash expenses totaling $40.7 million, primarily depreciation, amortization, stock-based compensation charges and impairment of assets, a decrease in other current assets of $4.0 million and an increase in accounts payable of $12.2 million. These increases were partly offset by increases in inventories of $17.0 million and trade accounts receivable of $2.7 million, and decreases in income taxes payable of $8.9 million, other long-term liabilities of $1.4 million and accrued liabilities of $0.9 million. The Company’s inventories increased 13.3% to $204.1 million at December 31, 2012, from $180.1 million at December 31, 2011, primarily due to increases in raw materials and finished goods. The balance of the cash provided resulted from changes in other asset and liability accounts, none of which was material.

The Company’s investing activities used $17.3 million, $77.7 million and $74.3 million in net cash in 2013, 2012 and 2011, respectively. Cash paid for capital expenditures decreased from $22.0 million in 2012 to $16.8 million in 2013. The Company used $14.1 million in 2013 to expand and increase manufacturing capacity in North America. The balance of the cash used for capital expenditures resulted from numerous purchases, none of which was individually material. The cash paid for capital expenditures was partly offset by proceeds from the sale of assets of $5.3 million and a Keymark-related entity’s repayment of a loan of $0.7 million. Net cash paid for the ShearBrace and Bierbach asset acquisitions totaled $6.5 million. The Company’s planned capital expenditures for 2014 total approximately $24.0 million.

In 2012, cash of $65.1 million was used for the acquisitions of S&P Clever, CarbonWrap and Keymark. The Company used $51.9 million in net cash in 2011 to acquire Fox Industries and Automatic Stamping. Cash paid for capital expenditures was $22.0 million in 2012, down from $26.1 million in 2011. The cash paid for capital expenditures was partly offset by proceeds from the sale of assets of $7.6 million and a Keymark-related entity’s

39

repayment of a loan of $1.7 million. The Company used $10.5 million in 2012 to complete its new manufacturing facility in Bad Nauheim, Germany, $4.2 million on updating and expanding recently acquired facilities in North America and Europe, and $1.1 million for other facilities. The balance of the cash used for capital expenditures resulted from numerous purchases, none of which was individually material.

In December 2013, the Company sold for $3.3 million, net of severance costs, its CarbonWrap product line assets, which included intangible assets and goodwill. In September 2013, the Company sold for $1.0 million, net of closing costs, its facilities in Ireland. In the first quarter of 2013, the Company had recorded a $1.0 million impairment charge on its Ireland facilities.

The Company’s financing activities used $13.4 million, $30.5 million and $76.3 million in net cash in 2013, 2012 and 2011, respectively. Uses of cash for financing activities in 2013 were from payments of cash dividends of $18.1 million and repurchasing of the Company’s stock for $9.8 million. Cash provided was primarily from issuance of the Company’s common stock on exercise of stock options of $15.1 million. In 2012, the uses of cash for financing activities were from payments of cash dividends of $30.2 million, repayment of line of credit borrowings associated with S&P Clever of $5.7 million, debt issuance fees of $1.4 million related to the Company’s $300.0 million credit agreement and contingent consideration related to the 2011 Fox Industries acquisition of $0.3 million. Cash provided was primarily from issuance of the Company’s common stock of $4.9 million and line of credit borrowings associated with S&P Clever of $2.2 million.

In February 2014, the Company’s Board of Directors authorized the Company to repurchase up to $50.0 million of the Company’s common stock. The authorization will remain in effect through the end of 2014. This replaced the $50.0 million repurchase authorization from January 2013. During 2013, the Company repurchased 0.3 million shares of its common stock, at a total cost of $9.8 million, and during 2011, the Company repurchased 1.9 million shares of its common stock, at a total cost of $53.2 million. The Company did not repurchase any shares of its common stock during 2012.

In July 2012, the Company entered into an unsecured credit agreement with a syndicate of banks providing for a 5-year revolving credit facility of $300.0 million, which includes a letter of credit sub-facility of up to $50.0 million. The Company may have the ability to increase the amount available under the credit agreement by an additional $200.0 million, to a maximum of $500.0 million, if existing lenders or new lenders are willing to make additional commitments and if the Company satisfies certain other conditions. On any such increase, the pricing for the facility may be subject to change. Amounts borrowed under this credit facility will bear interest at an annual rate equal to either, at the Company’s option, (a) the rate for Eurocurrency deposits for the corresponding deposits of U.S. dollars appearing on Reuters LIBOR01screen page (the “LIBOR Rate”), adjusted for any reserve requirement in effect, plus a spread of 0.60% to 1.45%, determined quarterly based on the Company’s leverage ratio (at December 31, 2013, the LIBOR Rate was 0.77%), or (b) a base rate, plus a spread of 0.00% to 0.45%, determined quarterly based on the Company’s leverage ratio. The base rate is defined in a manner such that it will not be less than the LIBOR Rate. The Company will pay fees for standby letters of credit at an annual rate equal to the LIBOR Rate plus the applicable spread described above, and will pay market-based fees for commercial letters of credit. The Company is required to pay an annual facility fee of 0.15% to 0.30% of the available commitments under the credit agreement, regardless of usage, with the applicable fee determined on a quarterly basis based on the Company’s leverage ratio. The Company was also required to pay customary fees as specified in a separate fee agreement between the Company and Wells Fargo Bank, National Association, in its capacity as the Agent under the credit agreement.

The proceeds of loans advanced under the credit agreement and letters of credit issued thereunder may be used for working capital and other general corporate needs of the Company, to pay dividends to the Company’s stockholders or to repurchase outstanding securities of the Company as permitted by the credit agreement, and to finance acquisitions by the Company permitted by the credit agreement. No loans or letters of credit are currently outstanding under the credit agreement. The Company and its subsidiaries are required to comply with various affirmative and negative covenants. The covenants include provisions that would limit the availability of funds as a result of a material adverse change to the Company’s financial position or results of operations. As of December 31, 2013, the Company was in compliance with its financial covenants under the credit agreement. The unsecured credit agreement expires in July 2017.

40

The Company’s contractual obligations, as of December 31, 2013, for future payments are as follows, in thousands:

	Payments Due by Period
	Total		Less						More
	all		than 1		1 — 3		3 — 5		than 5
Contractual Obligation	periods		year		years		years		years
Debt interest obligations	$	1,613	$	450	$	900	$	263	$	—
Operating lease obligations	18,309		6,671		8,214		3,414		10
Purchase obligations	15,390		14,775		533		82		—
Total	$	35,312	$	21,896	$	9,647	$	3,759	$	10

Purchase obligations consist of commitments primarily related to the acquisition, construction or expansion of facilities and equipment, consulting agreements, pension fund contributions and minimum purchase quantities of certain raw materials. The Company is not a party to any long-term supply contracts with respect to the purchase of raw materials or finished goods. Debt interest obligations include interest payments on fixed-term debt, line-of-credit borrowings and annual facility fees on the Company’s primary line-of-credit facility. Interest on line-of-credit facilities was estimated based on historical borrowings and repayment patterns. The Company’s primary line-of-credit facility includes annual facility fees from 0.15% to 0.30%, depending on the Company’s leverage ratio, on the unused portion of the facilities.

At December 31, 2013, the Company reported a gross liability of $3.8 million for uncertain tax positions. At this time, the Company is unable to make a reasonably reliable estimate of the timing of payments, if any, in individual years in connection with these liabilities; therefore, such amounts are not included in the above contractual obligation table. See Notes 1 and 10 to the Company’s Consolidated Financial Statements.

Inflation

The Company believes that the effect of inflation on the Company has not been material in recent years, as general inflation rates have remained relatively low. The Company’s main raw material, however, is steel, and increases in steel prices may adversely affect the Company’s gross profit margins if it cannot recover the higher costs through price increases.

Indemnification Provisions

In the normal course of business, the Company indemnifies employees, officers, directors, consultants and third parties with which the Company has contractual arrangements under terms that may require the Company to make payments in relation to certain events. The Company has not incurred significant obligations under indemnification provisions historically, and does not expect to incur significant obligations in the future. Accordingly, the Company has not recorded a liability for these indemnities.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

The Company has no variable interest-rate debt investments.

The Company has foreign exchange rate risk in its international operations, primarily Europe and Canada, and through purchases from foreign vendors. The Company does not currently hedge this risk. If the exchange rate were to change by 10% in any one country where the Company has operations, the change in net income would not be material to the Company’s operations taken as a whole. The translation adjustment resulted in an increase in accumulated other comprehensive income of $5.9 million for the year ended December 31, 2013, primarily due to the effect of the weakening of the United States dollar in relation to most European currencies and the Chinese Yuan, partly offset by the strengthening of the United States dollar in relation to the Canadian, Australian and New Zealand dollar.

41

Item 8. Consolidated Financial Statements and Supplementary Data.

SIMPSON MANUFACTURING CO., INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Consolidated financial statements
Report of Independent Registered Public Accounting Firm	43
Consolidated Balance Sheets at December 31, 2013 and 2012	44
Consolidated Statements of Operations for the years ended December 31, 2013, 2012 and 2011	45
Consolidated Statements of Comprehensive Income for the years ended December 31, 2013, 2012 and 2011	46
Consolidated Statements of Stockholders’ Equity for the years ended December 31, 2011, 2012 and 2013	47
Consolidated Statements of Cash Flows for the years ended December 31, 2013, 2012 and 2011	48
Notes to the Consolidated Financial Statements	49
Financial Statement Schedule
Schedule II — Valuation and Qualifying Accounts	78

42

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of Simpson Manufacturing Co., Inc.:

In our opinion, the consolidated financial statements listed in the accompanying index present fairly, in all material respects, the financial position of Simpson Manufacturing Co., Inc. and its subsidiaries at December 31, 2013 and 2012, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2013 in conformity with accounting principles generally accepted in the United States of America.  In addition, in our opinion, the financial statement schedule listed in the accompanying index presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements.  Also in our opinion, the Company did not maintain, in all material respects, effective internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) because material weaknesses in internal control over financial reporting related to the impairment testing of both goodwill and indefinite-lived in-process research and development intangible assets existed as of that date.  A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis. The material weaknesses referred to above are described in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. We considered these material weaknesses in determining the nature, timing, and extent of audit tests applied in our audit of the 2013 consolidated financial statements, and our opinion regarding the effectiveness of the Company’s internal control over financial reporting does not affect our opinion on those consolidated financial statements.  The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in management’s report referred to above.  Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits.  We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects.  Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation.  Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk.  Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.  A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PricewaterhouseCoopers LLP

San Francisco, California

March 7, 2014

43

Simpson Manufacturing Co., Inc. and Subsidiaries

Consolidated Balance Sheets

(In thousands, except per share data)

	December 31,
	2013		2012
ASSETS
Current assets
Cash and cash equivalents	$	251,208	$	175,553
Trade accounts receivable, net	90,017		82,812
Inventories	197,728		204,124
Deferred income taxes	12,699		11,473
Assets held for sale	—		593
Other current assets	16,454		23,499
Total current assets	568,106		498,054
Property, plant and equipment, net	209,533		213,452
Goodwill	129,218		121,981
Intangible assets	41,773		50,598
Other noncurrent assets	4,983		6,237
Total assets	$	953,613	$	890,322
LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities
Line of credit and notes payable	$	103	$	178
Trade accounts payable	34,933		37,117
Accrued liabilities	51,745		44,923
Accrued profit sharing trust contributions	5,784		5,191
Accrued cash profit sharing and commissions	6,049		3,414
Accrued workers’ compensation	4,591		4,692
Total current liabilities	103,205		95,515
Long-term liabilities	9,129		5,239
Total liabilities	112,334		100,754
Commitments and contingencies (Note 9)
Stockholders’ equity
Preferred stock, par value $0.01; authorized shares, 5,000; issued and outstanding shares, none	—		—
Common stock, par value $0.01; authorized shares, 160,000; issued and outstanding shares, 48,712 and 48,422 at December 31, 2013 and 2012, respectively	486		483
Additional paid-in capital	207,418		184,677
Retained earnings	615,289		592,309
Accumulated other comprehensive income	18,086		12,099
Total stockholders’ equity	841,279		789,568
Total liabilities and stockholders’ equity	$	953,613	$	890,322

The accompanying notes are an integral part of these consolidated financial statements.

44

Simpson Manufacturing Co., Inc. and Subsidiaries

Consolidated Statements of Operations

(In thousands, except per share data)

	Years Ended December 31,
	2013			2012			2011
Net sales	$	706,329		$	657,236		$	603,446
Cost of sales	391,791			373,759			332,642
Gross profit	314,538			283,477			270,804
Operating expenses:
Research and development and other engineering	36,843			35,919			25,886
Selling	85,102			82,364			73,568
General and administrative	109,077			100,973			95,820
Impairment of goodwill	—			2,346			1,282
Net loss on disposal of assets	2,038			166			191
	233,060			221,768			196,747
Income from operations	81,478			61,709			74,057
Income in equity method investment, before tax	—			—			4,389
Interest income	987			1,005			913
Interest expense	(901		)	(793		)	(573		)
Income before taxes	81,564			61,921			78,786
Provision for income taxes	30,593			20,003			27,886
Net income	$	50,971		$	41,918		$	50,900
Earnings per common share:
Basic	$	1.05		$	0.87		$	1.04
Diluted	$	1.05		$	0.87		$	1.04
Weighted average number of shares outstanding
Basic	48,521			48,339			48,974
Diluted	48,673			48,412			49,023

The accompanying notes are an integral part of these consolidated financial statements.

45

Simpson Manufacturing Co., Inc. and Subsidiaries

Consolidated Statements of Comprehensive Income

 (In thousands)

	Year End December 31,
	2013		2012			2011
Net Income	$	50,971	$	41,918		$	50,900
Other comprehensive income:
Translation adjustment, net of tax benefit (expense) of $29, $33 and ($1) for 2013, 2012 and 2011, respectively	5,941		5,559			(7,844		)
Unamortized pension adjustments, net of tax benefit of ($3) and $46 for 2013 and 2012, respectively	46		(243		)	—
Comprehensive income	$	56,958	$	47,234		$	43,056

The accompanying notes are an integral part of these consolidated financial statements.

46

Simpson Manufacturing Co., Inc. and Subsidiaries

Consolidated Statements of Stockholders’ Equity

for the years ended December 31, 2011, 2012 and 2013

(In thousands, except per share data)

												Accumulated
						Additional						Other
	Common Stock					Paid-in			Retained			Comprehensive			Treasury
	Shares		Par Value			Capital			Earnings			Income			Stock			Total
Balance, January 1, 2011	50,096		$	500		$	165,425		$	607,241		$	14,627		$	—		$	787,793
Net income	—		—			—			50,900			—			—			50,900
Translation adjustment, net of tax	—		—			—			—			(7,844		)	—			(7,844		)
Options exercised	8		—			214			—			—			—			214
Stock-based compensation expense	—		—			6,194			—			—			—			6,194
Tax benefit of options exercised	—		—			(1,554		)	—			—			—			(1,554		)
Repurchase of common stock	(1,948	)	—			—			—			—			(53,208		)	(53,208		)
Retirement of common stock	—		(19		)	—			(53,189		)	—			53,208			—
Cash dividends declared on common stock, $0.50 per share	—		—			—			(24,336		)	—			—			(24,336		)
Common stock issued at $30.91 per share	7		—			204			—			—			—			204
Balance, December 31, 2011	48,163		481			170,483			580,616			6,783			—			758,363
Net income	—		—			—			41,918			—			—			41,918
Translation adjustment, net of tax	—		—			—			—			5,559			—			5,559
Pension adjustment net of tax	—		—			—			—			(243		)	—			(243		)
Options exercised	185		2			4,923			—			—			—			4,925
Stock-based compensation expense	—		—			10,195			—			—			—			10,195
Tax benefit of options exercised	—		—			(233		)	—			—			—			(233		)
Cash dividends declared on common stock, $0.625 per share	—		—			—			(30,225		)	—			—			(30,225		)
Shares issued from release of restricted stock units	62		—			(1,109		)	—			—			—			(1,109		)
Common stock issued at $33.71 per share	12		—			418			—			—			—			418
Balance, December 31, 2012	48,422		483			184,677			592,309			12,099			—			789,568
Net income	—		—			—			50,971			—			—			50,971
Translation adjustment, net of tax	—		—			—			—			5,941			—			5,941
Pension adjustment net of tax	—		—			—			—			46			—			46
Options exercised	512		5			15,052			—			—			—			15,057
Stock-based compensation expense	—		—			12,090			—			—			—			12,090
Tax benefit of options exercised	—		—			(2,645		)	—			—			—			(2,645		)
Repurchase of common stock	(342	)	—			—			—			—			(9,825		)	(9,825		)
Retirement of common stock	—		(4		)	—			(9,821		)	—			9,825			—
Cash dividends declared on common stock, $0.375 per share	—		—			—			(18,170		)	—			—			(18,170		)
Shares issued from release of restricted stock units	111		2			(2,074		)	—			—			—			(2,072		)
Common stock issued at $33.81 per share	9		—			318			—			—			—			318
Balance, December 31, 2013	48,712		$	486		$	207,418		$	615,289		$	18,086		$	—		$	841,279

The accompanying notes are an integral part of these consolidated financial statements.

47

Simpson Manufacturing Co., Inc. and Subsidiaries

Consolidated Statements of Cash Flows

(In thousands)

	Years Ended December 31,
	2013			2012			2011
Cash flows from operating activities
Net income	$	50,971		$	41,918		$	50,900
Adjustments to reconcile net income to net cash provided by operating activities:
Loss on sale of assets	2,038			166			191
Depreciation and amortization	27,518			26,857			20,751
Impairment of long-lived assets	1,025			803			1,094
Impairment of goodwill	—			2,346			1,282
Deferred income taxes	3,620			189			(2,163		)
Noncash compensation related to stock plans	12,747			10,667			6,837
Gain in equity method investment	—			—			(4,389		)
Excess tax benefit of options exercised	(80		)	(110		)	—
Provision for (recovery of) doubtful accounts	(48		)	355			67
Accrued interest earned from related party	—			—			(58		)
Changes in operating assets and liabilities, net of effects of acquisitions and dispositions:
Trade accounts receivable	(6,651		)	(2,678		)	(6,982		)
Inventories	8,458			(17,045		)	(26,196		)
Other current assets	27			3,970			(190		)
Other noncurrent assets	237			(244		)	1,376
Trade accounts payable	(2,708		)	12,208			(10,126		)
Accrued liabilities	2,653			(909		)	2,899
Accrued profit sharing trust contributions	617			703			(1,102		)
Accrued cash profit sharing and commissions	2,611			(54		)	673
Other long-term liabilities	(1,024		)	(1,433		)	(1,112		)
Accrued workers’ compensation	(100		)	(783		)	790
Income taxes payable	4,595			(8,874		)	545
Net cash provided by operating activities	106,506			68,052			35,087
Cash flows from investing activities
Capital expenditures	(16,804		)	(21,961		)	(26,063		)
Asset acquisitions, net of cash acquired	(6,493		)	(65,125		)	(51,853		)
Loan repayments by related parties	700			1,698			552
Proceeds from sale of assets and a business	5,262			7,642			3,081
Net cash used in investing activities	(17,335		)	(77,746		)	(74,283		)
Cash flows from financing activities
Line of credit and other borrowings	—			2,183			—
Repayment of line of credit and other borrowings	(81		)	(5,747		)	—
Debt issuance costs	—			(1,415		)	—
Contingent consideration of asset acquisitions	(520		)	(354		)	—
Repurchase of common stock	(9,825		)	—			(53,208		)
Issuance of Company’s common stock	15,057			4,925			214
Excess tax benefit of options exercised	80			110			—
Dividends paid	(18,130		)	(30,193		)	(23,329		)
Net cash used in financing activities	(13,419		)	(30,491		)	(76,323		)
Effect of exchange rate changes on cash	(97		)	1,921			(5,713		)
Net increase (decrease) in cash and cash equivalents	75,655			(38,264		)	(121,232		)
Cash and cash equivalents at beginning of year	175,553			213,817			335,049
Cash and cash equivalents at end of year	$	251,208		$	175,553		$	213,817
Supplemental Disclosure of Cash Flow Information
Cash paid during the year for
Interest	$	30		$	350		$	279
Income taxes	23,624			31,391			30,789
Noncash activity during the year for
Capital expenditures	$	1,082		$	974		$	402
Asset acquisition	806			786			363
Stock-based compensation	318			418			204
Dividends declared but not paid	6,095			6,053			6,020
Equity method investment acquisition (Note 6)	—			—			708
Contribution in excess of pension benefit cost	55			57			—

The accompanying notes are an integral part of these consolidated financial statements.

48

Simpson Manufacturing Co., Inc. and Subsidiaries

Notes to Consolidated Financial Statements

1.Operations and Summary of Significant Accounting Policies

Nature of Operations

Simpson Manufacturing Co., Inc., through its subsidiary Simpson Strong-Tie Company Inc. (“Simpson Strong-Tie”) and its other subsidiaries (collectively, the “Company”), designs, engineers and is a leading manufacturer of wood construction products, including connectors, truss plates, fastening systems, fasteners and shearwalls, and concrete construction products, including adhesives, specialty chemicals, mechanical anchors, powder actuated tools and fiber reinforcing materials. The Company markets its products to the residential construction, industrial, commercial and infrastructure construction, remodeling and do-it-yourself markets.

The Company operates exclusively in the building products industry. The Company’s products are sold primarily in the United States, Canada, Europe, Asia and the South Pacific. Revenues have some geographic market concentration on the west coast of the United States. A portion of the Company’s business is therefore dependent on economic activity within this region and market. The Company is dependent on the availability of steel, its primary raw material.

Principles of Consolidation

The consolidated financial statements include the accounts of Simpson Manufacturing Co., Inc. and its subsidiaries. Investments in 50% or less owned entities are accounted for using either cost or the equity method. The Company consolidates all variable interest entities (VIEs) where it is the primary beneficiary. There were no VIEs as of December 31, 2013 or 2012. All significant intercompany transactions have been eliminated.

Use of Estimates

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Revenue Recognition

The Company recognizes revenue when the earnings process is complete, net of applicable provision for discounts, returns and incentives, whether actual or estimated based on the Company’s experience. This generally occurs when products are shipped to the customer in accordance with the sales agreement or purchase order, ownership and risk of loss pass to the customer, collectability is reasonably assured and pricing is fixed or determinable. The Company’s general shipping terms are F.O.B. shipping point, where title is transferred and revenue is recognized when the products are shipped to customers. When the Company sells F.O.B. destination point, title is transferred and the Company recognizes revenue on delivery or customer acceptance, depending on terms of the sales agreement. Service sales, representing after-market repair and maintenance, engineering activities, software license sales and service and lease income, though significantly less than 1% of net sales and not material to the consolidated financial statements, are recognized as the services are completed or the software products and services are delivered. If actual costs of sales returns, incentives and discounts were to significantly exceed the recorded estimated allowances, the Company’s sales would be adversely affected.

Reclassification

The Company reclassified $0.7 million from the 2011 write down of excess and obsolete inventory to changes in inventories, net of effect of acquisitions and dispositions, in the Consolidated Statements of Cash Flows.

Cash Equivalents

The Company considers all highly liquid investments with an original or remaining maturity of three months or less at the time of purchase to be cash equivalents.

49

Investments

In 2011, the Company disposed of its only minority investment. Minority investments are carried either at cost or by the equity method of accounting, depending on the Company’s ownership interest and its ability to influence the operating or financial decisions of the investee, and are classified as long-term investments.

The Company periodically reviews its investments for impairment. If the carrying value of an investment exceeds its fair value and the decline in fair value is determined to be other-than-temporary, the Company writes down the value of the investment to its fair value.

Allowance for Doubtful Accounts

The Company assesses the collectability of specific customer accounts that would be considered doubtful based on the customer’s financial condition, payment history, credit rating and other factors that the Company considers relevant, or accounts that the Company assigns for collection. The Company reserves for the portion of those outstanding balances that the Company believes it is not likely to collect based on historical collection experience. The Company also reserves 100% of the amounts that it deems uncollectable due to a customer’s deteriorating financial condition or bankruptcy. If the financial condition of the Company’s customers were to deteriorate, resulting in probable inability to make payments, additional allowances may be required.

Inventory Valuation

Inventories are stated at the lower of cost or net realizable value (market). Cost includes all costs incurred in bringing each product to its present location and condition, as follows:

·Raw materials and purchased finished goods for resale — principally valued at cost determined on a weighted average basis; and

·In-process products and finished goods — cost of direct materials and labor plus attributable overhead based on a normal level of activity.

The Company applies net realizable value and obsolescence to the gross value of the inventory. The Company estimates net realizable value based on estimated selling price less further costs to completion and disposal. The Company impairs slow-moving products by comparing inventories on hand to projected demand. If on-hand supply of a product exceeds projected demand or if the Company believes the product is no longer marketable, the product is considered obsolete inventory. The Company revalues obsolete inventory to its net realizable value. The Company has consistently applied this methodology. The Company believes that this approach is prudent and makes suitable impairments for slow-moving and obsolete inventory. When impairments are established, a new cost basis of the inventory is created. Unexpected change in market demand, building codes or buyer preferences could reduce the rate of inventory turnover and require the Company to recognize more obsolete inventory.

Sales Incentive and Advertising Allowances

The Company records estimated reductions to revenues for sales incentives, primarily rebates for volume discounts, and allowances for co-operative advertising.

Allowances for Sales Discounts

The Company records estimated reductions to revenues for discounts taken on early payment of invoices by its customers.

Warranties

The Company provides product warranties for specific product lines and accrues for estimated future warranty costs, none of which has been material to the consolidated financial statements, in the period in which the sale is recorded. In a limited number of circumstances, the Company may also agree to indemnify customers against legal claims made against those customers by the end users of the Company’s products. Historically, payments made by the Company, if any, under such agreements have not had a material effect on the Company’s consolidated results of operations, cash flows or financial position.

Fair Value of Financial Instruments

The “Fair Value Measurements and Disclosures” topic of the Financial Accounting Standards Board (“FASB”) Accounting Standards CodificationTM (“ASC”) establishes a valuation hierarchy for disclosure of the inputs used to measure fair value. This hierarchy prioritizes the inputs into three broad levels as follows: Level 1 inputs are quoted

50

prices (unadjusted) in active markets for identical assets or liabilities; Level 2 inputs are quoted prices for similar assets and liabilities in active markets or inputs that are observable for the asset or liability, either directly or indirectly through market corroboration, for substantially the full term of the financial instrument; Level 3 inputs are unobservable inputs based on the Company’s assumptions used to measure assets and liabilities at fair value. A financial asset’s or liability’s classification within the hierarchy is determined based on the lowest level input that is significant to the fair value measurement.

As of December 31, 2013, the Company’s investments consisted of only United States Treasury securities and money market funds, which are the Company’s primary financial instruments, maintained in cash equivalents and carried at cost, approximating fair value, based on Level 1 inputs. The balance of the Company’s primary financial instruments was as follows:

(in thousands)

At December 31,
2013		2012
$	117,571	$	76,130

The carrying amounts of trade accounts receivable, accounts payable and accrued liabilities approximate fair value due to the short-term nature of these instruments. The fair value of the Company’s line of credit is classified as Level 2 within the fair value hierarchy and is calculated based on borrowings with similar maturities, current remaining average life to maturity and current market conditions.

Property, Plant and Equipment

Property, plant and equipment are carried at cost. Major renewals and betterments are capitalized. Maintenance and repairs are expensed on a current basis. When assets are sold or retired, their costs and accumulated depreciation are removed from the accounts, and the resulting gains or losses are reflected in the consolidated statements of operations.

The “Intangibles—Goodwill and Other” topic of the FASB ASC provides guidance on capitalization of the costs incurred for computer software developed or obtained for internal use. The Company capitalizes substantially all external costs and qualifying internal costs related to the purchase and implementation of software projects used for business operations and engineering design activities. Capitalized software costs primarily include purchased software and external consulting fees. Capitalized software projects are amortized over the estimated useful lives of the software.

Depreciation and Amortization

Depreciation of software, machinery and equipment is provided using accelerated methods over the following estimated useful lives:

Software	3 to 5 years
Machinery and equipment	3 to 10 years

Buildings and site improvements are depreciated using the straight-line method over their estimated useful lives, which range from 15 to 45 years. Leasehold improvements are amortized using the straight-line method over the shorter of the expected life or the remaining term of the lease. Amortization of purchased intangible assets with finite useful lives is computed using the straight-line method over the estimated useful lives of the assets.

In-Process Research and Development Assets

In-process research and development (“IPR&D”) assets represent capitalized incomplete research projects that the Company acquired through business combinations. Such assets are initially measured at their acquisition-date fair values and are required to be classified as indefinite-lived assets until the successful completion of the associated research and development efforts. During the development period after the date of acquisition, these assets will not be amortized until the research and development projects are completed and the resulting assets are ready for their intended use. The Company performs an impairment test annually and more frequently if events or changes in circumstances indicate it that is more likely than not that the asset is impaired. On successful completion of the research and development project the Company makes a determination about the then-remaining useful life and begins amortization.

51

In connection with the 2012 S&P Clever acquisition, the Company recorded $4.8 million of in-process research and development assets, which were classified as indefinite-lived intangibles assets.

Cost of Sales

The types of costs included in cost of sales include material, labor, factory and tooling overhead, shipping, and freight costs. Major components of these expenses are material costs, such as steel, packaging and cartons, personnel costs, and facility costs, such as rent, depreciation and utilities, related to the production and distribution of the Company’s products. Inbound freight charges, purchasing and receiving costs, inspection costs, warehousing costs, internal transfer costs, and other costs of the Company’s distribution network are also included in cost of sales.

Tool and Die Costs

Tool and die costs are included in product costs in the year incurred.

Shipping and Handling Fees and Costs

The Company’s general shipping terms are F.O.B. shipping point. Shipping and handling fees and costs are included in revenues and product costs, as appropriate, in the year incurred.

Product and Software Research and Development Costs

Product research and development costs, which are included in operating expenses and are charged against income as incurred, were $10.7 million, $11.5 million and $6.1 million in 2013, 2012 and 2011, respectively. The types of costs included as product research and development expenses are typically related to salaries and benefits, professional fees and supplies. In 2013 and 2012, the Company incurred software development expenses related to its expansion into the plated truss market. The Company amortizes acquired patents over their remaining lives and performs periodic reviews for impairment. The cost of internally developed patents is expensed as incurred.

Selling Costs

Selling costs include expenses associated with selling, merchandising and marketing the Company’s products. Major components of these expenses are personnel, sales commissions, facility costs such as rent, depreciation and utilities, professional services, information technology costs, sales promotion, advertising, literature and trade shows.

Advertising Costs

Advertising costs are included in selling expenses, are expensed when the advertising occurs, and were $7.0 million, $7.2 million and $6.3 million in 2013, 2012 and 2011, respectively.

General and Administrative Costs

General and administrative costs include personnel, information technology related costs, facility costs such as rent, depreciation and utilities, professional services, amortization of intangibles and bad debt charges.

Income Taxes

Income taxes are calculated using an asset and liability approach. The provision for income taxes includes federal, state and foreign taxes currently payable and deferred taxes, due to temporary differences between the financial statement and tax bases of assets and liabilities. In addition, future tax benefits are recognized to the extent that realization of such benefits is more likely than not.

Sales Taxes

The Company presents taxes collected and remitted to governmental authorities on a net basis in the accompanying consolidated statements of operations.

Foreign Currency Translation

The local currency is the functional currency of the Company’s operations in Europe, Canada, Asia, Australia, New Zealand and South Africa. Assets and liabilities denominated in foreign currencies are translated using the exchange rate on the balance sheet date. Revenues and expenses are translated using average exchange rates prevailing during

52

the year. The translation adjustment resulting from this process is shown separately as a component of stockholders’ equity. Foreign currency transaction gains or losses are included in general and administrative expenses.

Plant Closure

In September 2012, the Company decided to discontinue manufacturing heavy-duty mechanical anchors made in its facility in Ireland, which were sold mainly in Europe, to focus on selling light-duty and medium-duty anchors and its fastener products in conjunction with its connector products. In December 2012, the Company ceased producing and selling heavy-duty mechanical anchors and terminated employees in Europe, primarily in Ireland and Germany, who were manufacturing, selling or supporting the product line. In the third quarter of 2013, the Company concluded remaining activities associated with the terminated product line, including transferring remaining inventories and certain fixed assets to its other operating locations and preparing the site for lease. All costs associated with the closure were reported in the Europe segment.

At December 31, 2012, the long-lived assets of the Ireland facility had a net book value of $2.8 million, including land and building with a net book value of $2.7 million. In the first quarter of 2013, the Company concluded that the carrying value of its Ireland facility, associated with the Europe segment, exceeded its net estimated realizable value, and therefore recorded an impairment charge of $1.0 million, within general and administrative expenses. The net realizable value was based on the Company’s intent to lease the facility. In September 2013, after receiving an offer that exceeded expectations, the Company reconsidered leasing the facility and decided to accept the offer. The facility had a remaining net book value of $1.7 million and was sold for $1.0 million, resulting in a $0.7 million loss on sales of assets. Remaining equipment with a net book value of $0.1 million was sold to outside parties, transferred to other branches within the Company or scrapped. See note 5.

In 2012, the Company recorded employee severance obligations of $3.0 million, of which $2.4 million was paid in 2012, and $0.6 million was accrued at December 31, 2012. In the first nine months of 2013, severance payments of $0.3 million were made and severance charges of $0.2 million were reversed due to a court decision requiring the Company to retain an employee until 2014. No additional severance obligations were recorded in 2013. The remaining balance, of less than $0.1 million to be paid in 2014, represents the statutory and discretionary amounts due to employees that were or will be involuntarily terminated. The Company does not expect to record additional severance expense in 2014.

Closure liabilities are recognized when a transaction or event has occurred that leaves little or no discretion to avoid future settlement of the liability. As of December 31, 2012, the Company had recorded $0.3 million in plant closure expenses, of which $0.2 million was paid in 2012 and $0.1 million was paid in 2013. In 2013, the Company had recorded an additional $0.1 million in plant closure costs and paid $0.2 million in accrued plant closure costs.

In December 2013, the Company had substantially completed the liquidation of its Irish subsidiary, which included liquidating nearly all of its assets and settling most of its debts. As a result, the Company reclassified $2.8 million of its accumulated other comprehensive income, related to foreign exchange losses from its Irish subsidiary, to its consolidated statement of operations. This amount is classified as a loss on disposal of assets and was recorded in the Administrative & All Other segment.

Sale of Product Line

In December 2013, the Company sold its CarbonWrap product line to The DowAksa USA, LLC for $3.8 million. The CarbonWrap product line had assets of $2.0 million, consisting of $1.5 million in intangible assets and $0.5 million in goodwill. As part of the transaction, the Company also incurred severance costs of $0.5 million. As a result of this transaction the Company recognized a pre-tax gain of $1.4 million.

Because the CarbonWrap assets constituted an integrated business in the US reporting unit, a portion of the US reporting unit’s goodwill must be included in the carrying amount of the asset group disposed. The amount of goodwill from the US reporting unit included in the CarbonWrap asset group was $0.5 million, which was proportionate to the fair value of the CarbonWrap asset group compared to the estimated fair value of the US reporting unit.

The Company continues to invest in related product lines, such as those acquired from Fox Industries, Inc. in 2011 and S&P Clever in 2012. See note 2.

53

Common Stock

Subject to the rights of holders of any preferred stock that may be issued in the future, holders of common stock are entitled to receive such dividends, if any, as may be declared from time to time by the Company’s Board of Directors (the “Board”) out of legally available funds, and in the event of liquidation, dissolution or winding-up of the Company, to share ratably in all assets available for distribution. The holders of common stock have no preemptive or conversion rights. Subject to the rights of any preferred stock that may be issued in the future, the holders of common stock are entitled to one vote per share on any matter submitted to a vote of the stockholders, except that, subject to compliance with pre-meeting notice and other conditions pursuant to the Company’s Bylaws, stockholders may cumulate their votes in an election of directors, and each stockholder may give one candidate a number of votes equal to the number of directors to be elected multiplied by the number of shares held by such stockholder or may distribute such stockholder’s votes on the same principle among as many candidates as such stockholder thinks fit. A director is elected if the votes cast “for” such director’s election exceed the votes cast “against” such director’s election, except that, if a stockholder properly nominates a candidate for election to the Board, the candidates with the highest number of affirmative votes (up to the number of directors to be elected) are elected. There are no redemption or sinking fund provisions applicable to the common stock.

In 1999, the Company declared a dividend distribution of one Right to purchase Series A Participating preferred stock per share of common stock. The Rights will be exercisable, unless redeemed earlier by the Company, if a person or group acquires, or obtains the right to acquire, 15% or more of the outstanding shares of common stock or commences a tender or exchange offer that would result in it acquiring 15% or more of the outstanding shares of common stock, either event occurring without the prior consent of the Company. The amount of Series A Participating preferred stock that the holder of a Right is entitled to receive and the purchase price payable on exercise of a Right are both subject to adjustment. Any person or group that acquires 15% or more of the outstanding shares of common stock without the prior consent of the Company would not be entitled to this purchase. Any stockholder who held 25% or more of the Company’s common stock when the Rights were originally distributed would not be treated as having acquired 15% or more of the outstanding shares unless such stockholder’s ownership is increased to more than 40% of the outstanding shares.

The Rights will expire on June 14, 2019, or they may be redeemed by the Company at one cent per Right prior to that date. The Rights do not have voting or dividend rights and, until they become exercisable, have no dilutive effect on the earnings of the Company. One million shares of the Company’s preferred stock have been designated Series A Participating preferred stock and reserved for issuance on exercise of the Rights. No event during 2013 made the Rights exercisable.

Preferred Stock

The Board has the authority to issue the authorized and unissued preferred stock in one or more series with such designations, rights and preferences as may be determined from time to time by the Board. Accordingly, the Board is empowered, without stockholder approval, to issue preferred stock with dividend, redemption, liquidation, conversion, voting or other rights that could adversely affect the voting power or other rights of the holders of the Company’s common stock.

Net Income per Common Share

Basic net income per common share is computed based on the weighted average number of common shares outstanding. Potentially dilutive shares, using the treasury stock method, are included in the diluted per-share calculations for all periods when the effect of their inclusion is dilutive.

54

The following shows a reconciliation of basic earnings per share (“EPS”) to diluted EPS:

(in thousands, except per-share amounts)

	Year Ended December 31,
	2013		2012		2011
Net income available to common stockholders	$	50,971	$	41,918	$	50,900
Basic weighted average shares outstanding	48,521		48,339		48,974
Dilutive effect of potential common stock equivalents — stock options	152		73		49
Diluted weighted average shares outstanding	48,673		48,412		49,023
Net earnings per share:
Basic	$	1.05	$	0.87	$	1.04
Diluted	$	1.05	$	0.87	$	1.04
Potentially dilutive securities excluded from earnings per diluted share because their effect is anti-dilutive	—		1,700		1,363

Anti-dilutive shares attributable to outstanding stock options were excluded from the calculation of diluted net income per share.

The potential tax benefits derived from the amount of the average stock price for the period in excess of the grant date fair value of stock options, known as the windfall tax benefit, is added to the proceeds of stock option exercises under the treasury stock method for computing the amount of dilutive securities used to determine the outstanding shares for the calculation of diluted earnings per share.

Comprehensive Income

Comprehensive income is defined as net income plus other comprehensive income. Other comprehensive income consists of changes in cumulative translation adjustments and changes in unamortized pension adjustments recorded directly in accumulated other comprehensive income within stockholders’ equity. The following shows the components of accumulated other comprehensive income as of December 31, 2013 and 2012:

(in thousands)

	December 31,
	2013			2012
Translation adjustments, net of tax of $854 and $883 as of 2013 and 2012, respectively	$	18,283		$	12,342
Unamortized pension adjustments, net of tax of $43 and $46 as of 2013 and 2012, respectively	(197		)	(243		)
Total accumulated other comprehensive income	$	18,086		$	12,099

The 2013 translation adjustments activity included the realization of $2.8 million in cumulative currency translation adjustments related to the liquidation of the Irish subsidiary as a net loss on disposal of assets in the Consolidated Statements of Operations.

Concentration of Credit Risk

Financial instruments that potentially subject the Company to concentrations of credit risk consist of cash in banks, short-term investments in United States Treasury securities, money market funds and trade accounts receivable. The Company maintains its cash in demand deposit and money market accounts held primarily at eleven banks.

Accounting for Stock-Based Compensation

With the approval of the Company’s stockholders on April 26, 2011, the Company adopted the Simpson Manufacturing Co., Inc. 2011 Incentive Plan (the “2011 Plan”). The 2011 Plan amended and restated in their entirety, and incorporated and superseded, both the Simpson Manufacturing Co., Inc. 1994 Stock Option Plan (the “1994 Plan”), which was principally for the Company’s employees, and the Simpson Manufacturing Co., Inc. 1995

55

Independent Director Stock Option Plan (the “1995 Plan”), which was for its independent directors. Options previously granted under the 1994 Plan or the 1995 Plan will not be affected by the adoption of the 2011 Plan and will continue to be governed by the 1994 Plan or the 1995 Plan, respectively.

Under the 1994 Plan, the Company could grant incentive stock options and non-qualified stock options, although the Company granted only non-qualified stock options under the 1994 Plan and the 1995 Plan. The Company generally granted options under each of the 1994 Plan and the 1995 Plan once each year. The exercise price per share of each stock option granted in February 2011 under the 1994 Plan equaled the closing market price per share of the Company’s common stock as reported by the New York Stock Exchange on the day preceding the day that the Compensation and Leadership Development Committee of the Company’s Board of Directors met to approve the grant of the options. The exercise price per share under each option granted under the 1995 Plan was at the fair market value on the date specified in the 1995 Plan. Options vest and expire according to terms established at the grant date. Options granted under the 1994 Plan typically vest evenly over the requisite service period of four years and have a term of seven years. The vesting of options granted under the 1994 Plan will be accelerated if the grantee ceases to be employed by the Company after reaching age 60 or if there is a change in control of the Company. Options granted under the 1995 Plan were fully vested on the date of grant. Shares of common stock issued on exercise of stock options under the 1994 Plan and the 1995 Plan are registered under the Securities Act of 1933.

Under the 2011 Plan, the Company may grant incentive stock options, non-qualified stock options, restricted stock and restricted stock units, although the Company currently intends to award primarily restricted stock units and to a lesser extent, if at all, non-qualified stock options. The Company does not currently intend to award incentive stock options or restricted stock. Under the 2011 Plan, no more than 16.3 million shares of the Company’s common stock may be issued (including shares already sold) pursuant to all awards under the 2011 Plan, including on exercise of options previously granted under the 1994 Plan and the 1995 Plan. Shares of common stock to be issued pursuant to the 2011 Plan are registered under the Securities Act of 1933.

The following table shows the Company’s stock-based compensation activity for the years ended December 31, 2013, 2012 and 2011:

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Stock-based compensation expense recognized in operating expenses	$	12,053		$	10,205		$	6,133
Tax benefit of stock-based compensation expense in provision for income taxes	4,225			3,610			2,261
Stock-based compensation expense, net of tax	$	7,828		$	6,595		$	3,872
Fair value of shares vested	$	12,090		$	10,195		$	6,194
Proceeds to the Company from the exercise of stock-based compensation	$	15,057		$	4,925		$	214
Tax benefit from exercise of stock-based compensation, including shortfall tax benefits	$	(2,645	)	$	(233	)	$	(1,554	)

(in thousands)

	At December 31,
	2013		2012		2011
Stock-based compensation cost capitalized in inventory	$	374	$	335	$	345

The stock-based compensation expense included in cost of sales, research and development and engineering expense, selling expense, or general and administrative expense depends on the job functions performed by the employees to whom the stock options were granted, or the restricted stock units were awarded.

The assumptions used to calculate the fair value of options or restricted stock units are evaluated and revised, as necessary, to reflect market conditions and the Company’s experience.

56

Goodwill Impairment Testing

The Company tests goodwill for impairment at the reporting unit level on an annual basis (in the fourth quarter for the Company). The Company also reviews goodwill for impairment whenever events or changes in circumstances indicate the carrying value of an asset may not be recoverable. These events or circumstances could include a significant change in the business climate, legal factors, operating performance indicators, competition, or disposition or relocation of a significant portion of a reporting unit.

The reporting unit level is generally one level below the operating segment and is at the country level except in the United States and Australia and except for S&P Clever Reinforcement Company AG and S&P Clever International AG, both companies incorporated under the laws of Switzerland (collectively, “S&P Clever”).

The Company has determined that the United States reporting unit includes four components: Northwest United States, Southwest United States, Northeast United States and Southeast United States (collectively the “U.S. Components”). The Company aggregates the U.S. Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the U.S. Components working in concert. The U.S. Components are economically similar because of a number of factors, including, selling similar products to shared customers and sharing assets and services such as intellectual property, manufacturing assets for certain products, research and development projects, manufacturing processes, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the U.S. Components level and costs are allocated among the four U.S. Components.

The Company determined that the Australia reporting unit includes three components: Australia, New Zealand and South Africa (collectively the “AU Components”). The Company aggregates the AU Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the AU Components working in concert. The AU Components are economically similar because of a number of factors, including that New Zealand and South Africa operate as extensions of their Australian parent company selling similar products and sharing assets and services such as intellectual property, manufacturing assets for certain products, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the AU Components level and costs are allocated among the AU Components.

The Company has determined that the S&P Clever reporting unit includes seven components: S&P Switzerland, S&P Poland, S&P Austria, S&P The Netherlands, S&P Portugal, S&P Germany and S&P France (collectively the S&P Components”). The Company aggregates the S&P Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the S&P Components working in concert. The S&P Components are economically similar because of a number of factors, including sharing assets and services such as intellectual property, manufacturing assets for certain products, research and development projects, manufacturing processes, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the S&P Components level and costs are allocated among the S&P Components.

The Company determined that the Denmark reporting unit includes two components: Denmark and Poland (collectively the “DK Components”). The Company aggregates the DK Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the DK Components working in concert. The DK Components are economically similar because of a number of factors, including that Poland sells similar products and shares assets, such as intellectual property, manufacturing assets for certain products and management of inventory excesses and shortages.

For certain reporting units, the Company may first assess qualitative factors related to the goodwill of the reporting unit to determine whether it is necessary to perform a two-step impairment test. If the Company judges that it is more likely than not that the fair value of the reporting unit is greater than the carrying amount of the reporting unit, including goodwill, no further testing is required. If the Company judges that it is more likely than not that the fair value of the reporting unit is less than the carrying amount of the reporting unit, including goodwill, the Company will perform a two-step impairment test on goodwill. In the first step, the Company compares the fair value of the reporting unit to its carrying value. The fair value calculation uses a discounted cash flow model and may be supplemented by market approaches if information is readily available. If the Company judges that the carrying value of the net assets assigned to the reporting unit, including goodwill, exceeds the fair value of the reporting unit, a second step of the impairment test must be performed to determine the implied fair value of the reporting unit’s goodwill. If the Company judges that the carrying value of a reporting unit’s goodwill exceeds its implied fair value,

57

the Company would record an impairment charge equal to the difference between the implied fair value of the goodwill and the carrying value.

Determining the fair value of a reporting unit or an indefinite-lived purchased intangible asset is a judgment involving significant estimates and assumptions. These estimates and assumptions include revenue growth rates, operating margins and working capital requirements used to calculate projected future cash flows, risk-adjusted discount rates, and future economic and market conditions (Level 3 fair value inputs). The Company bases its fair value estimates on assumptions that it believes to be reasonable, but that are unpredictable and inherently uncertain. Actual future results may differ from those estimates.

Assumptions about a reporting unit’s operating performance in the first year of the discounted cash flow model used to determine whether or not the goodwill related to that reporting unit is impaired are derived from the Company’s budget. The fair value model considers such factors as macro-economic conditions, revenue and expense forecasts, product line changes, material, labor and overhead costs, tax rates, working capital levels and competitive environment. Future estimates, however derived, are inherently uncertain but the Company believes that this is the most appropriate source on which to base its estimates.

The Company uses these parameters only to provide a basis for the determination of whether or not the goodwill related to a reporting unit is impaired. No inference whatsoever should be drawn from these parameters about the Company’s future financial performance and they should not be taken as projections or guidance of any kind.

The impairment charge taken in 2012 resulting from the Company’s annual impairment test in the fourth quarter of 2012 was associated with assets in the Germany reporting unit that were acquired in the years 2002 and 2008. The Germany reporting unit’s carrying value, including goodwill, exceeded the fair value, primarily due to reduced future expected net cash flows from weakening profit margins due to European economic conditions, specifically in Germany. The goodwill associated with the Germany reporting unit was fully impaired. The Company’s 2011 annual goodwill impairment analysis resulted in impairment charges associated with the U.K. reporting unit.

The Company’s S&P Clever reporting unit passed step one of the annual 2013 impairment test by a 9% margin indicating an estimated value greater than its net book value. The S&P Clever reporting unit is sensitive to management’s plans for increasing sales, margins and cash flows by expanding its sales into France, other European countries and selling into the Company’s Asia/Pacific segment, as well as the release of new products. The S&P Clever reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the S&P Clever reporting unit’s goodwill, which was $19.0 million at December 31, 2013.

The Company’s France reporting unit passed step one of the annual 2013 impairment test by a 10% margin. The France reporting unit is highly sensitive to management’s plans for increasing sales at or slightly above inflation in a recovering European economy, while maintaining operating margins and increasing cash flows. The France reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the France reporting unit’s goodwill, which was $14.9 million at December 31, 2013.

The Company’s Australia reporting unit passed step one of the annual 2013 impairment test by a 4% margin. The Australia reporting unit is highly sensitive to management’s plans for increasing sales, margins and cash flows by expanding activities in Australia, New Zealand and South Africa. The Australia reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the Australia reporting unit’s goodwill, which was $1.7 million at December 31, 2013.

58

Key Assumptions Used in the Annual Goodwill Impairment Testing

Key assumptions used in the annual goodwill impairment test (“Step 1”) using discounted cash flow models for the Company’s reporting units included compound annual growth rates (“CAGR”) and average annual pre-tax operating margins during the forecast period, and discount rates. Sensitivity assessment of key assumptions for the reporting unit annual impairment tests are presented in the table below for reporting units that passed Step 1 with a margin of 10% or less. The margin by which the reporting units passed the annual goodwill impairment test is noted in the table below.

							Pre-Tax
	Step 1		Discount				Operating
	Pass		Rate (1)		CAGR (2)		Margin (3)
	Margin		Increases		Decreases		Decreases
S&P Clever	9	%	7	%	6	%	10	%
France	10	%	13	%	19	%	15	%
Australia	4	%	2	%	2	%	6	%

(1)Hypothetical percentage increases noted in the discount rates, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values, and thus it would not result in the reporting unit failing Step 1 of the goodwill impairment test.

(2)Hypothetical percentage decreases noted in the CAGR, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values.

(3)Hypothetical annual average percentage decreases noted in average annual pre-tax operating margins, holding all other assumptions constant, would not have decreased the fair value of the reporting units below their carrying values.

The changes in the carrying amount of goodwill, by segment, as of December 31, 2012 and 2013, were as follows:

(in thousands)

	North						Asia
	America			Europe			Pacific			Total
Balance as of January 1, 2012:
Goodwill	$	84,567		$	34,538		$	1,948		$	121,053
Accumulated impairment losses	(10,666		)	(10,538		)	—			(21,204		)
	73,901			24,000			1,948			99,849
Goodwill acquired	3,581			19,245			—			22,826
Foreign exchange	101			364			31			496
Impairment	—			(2,346		)	—			(2,346		)
Reclassifications (1)	1,156			—			—			1,156
Balance as of December 31, 2012:
Goodwill	89,405			54,147			1,979			145,531
Accumulated impairment losses	(10,666		)	(12,884		)	—			(23,550		)
	78,739			41,263			1,979			121,981
Goodwill acquired	918			674			—			1,592
Goodwill disposed	(480		)	—			—			(480		)
Foreign exchange	(248		)	1,393			(273		)	872
Impairment	—			—			—			—
Reclassifications (2)	5,893			(640		)	—			5,253
Balance as of December 31, 2013:
Goodwill	95,488			55,574			1,706			152,768
Accumulated impairment losses	(10,666		)	(12,884		)	—			(23,550		)
	$	84,822		$	42,690		$	1,706		$	129,218

(1)(2) See footnotes following table entitled Indefinite-Lived Intangibles, below.

Amortizable Intangible Assets

The total gross carrying amount and accumulated amortization of intangible assets, most of which are or will be, subject to amortization at December 31, 2013, were $67.7 million and $26.0 million, respectively. The aggregate amount of amortization expense of intangible assets for the years ended December 31, 2013, 2012 and 2011 was $7.1 million, $7.8 million and $4.3 million, respectively.

The changes in the carrying amounts of patents, unpatented technologies and non-compete agreements and other intangible assets subject to amortization as of December 31, 2012 and 2013, were as follows:

(in thousands)

	Gross					Net
	Carrying		Accumulated			Carrying
Patents	Amount		Amortization			Amount
Balance at January 1, 2012	$	6,681	$	(4,767	)	$	1,914
Amortization	—		(610		)	(610		)
Foreign exchange	3		—			3
Balance at December 31, 2012	6,684		(5,377		)	1,307
Amortization	—		(611		)	(611		)
Foreign exchange	5		—			5
Balance at December 31, 2013	$	6,689	$	(5,988	)	$	701

59

	Gross						Net
	Carrying			Accumulated			Carrying
Unpatented Technology	Amount			Amortization			Amount
Balance at January 1, 2012	$	4,129		$	(1,395	)	$	2,734
Amortization	—			(622		)	(622		)
Foreign exchange	32			—			32
Reclassifications (3)	1,200			—			1,200
Balance at December 31, 2012	5,361			(2,017		)	3,344
Disposals	(1,530		)	158			(1,372		)
Amortization	—			(3,398		)	(3,398		)
Foreign exchange	799			—			799
Reclassifications (4)	14,347			—			14,347
Balance at December 31, 2013	$	18,977		$	(5,257	)	$	13,720

	Gross						Net
Non-Compete Agreements,	Carrying			Accumulated			Carrying
Trademarks and Other	Amount			Amortization			Amount
Balance at January 1, 2012	$	16,276		(5,361		)	10,915
Acquisition	32,355			—			32,355
Disposal	(2,212		)	1,628			(584		)
Amortization	—			(4,309		)	(4,309		)
Foreign exchange	(2		)	—			(2		)
Reclassifications (1)(3)(5)	(4,426		)	—			(4,426		)
Removal of fully amortized asset	(5,040		)	5,040			—
Balance at December 31, 2012	36,951			(3,002		)	33,949
Acquisition	4,130			—			4,130
Disposal	(200		)	74			(126		)
Amortization	—			(636		)	(636		)
Foreign exchange	(728		)	—			(728		)
Reclassifications (2)(4)(6)(7)	(26,588		)	—			(26,588		)
Removal of fully amortized asset	(10		)	10			—
Balance at December 31, 2013	$	13,555		$	(3,554	)	$	10,001

	Gross					Net
	Carrying		Accumulated			Carrying
Customer Relationships	Amount		Amortization			Amount
Balance at January 1, 2012	$	18,940	(6,647		)	12,293
Amortization	—		(2,052		)	(2,052		)
Foreign exchange	57		—			57
Reclassifications (5)	1,700		—			1,700
Balance at December 31, 2012	20,697		(8,699		)	11,998
Amortization	—		(2,465		)	(2,465		)
Foreign exchange	229		—			229
Reclassifications (6)	1,923		—			1,923
Balance at December 31, 2013	$	22,849	$	(11,164	)	$	11,685

(1)(2)(3)(4)(5)(6)(7) See footnotes following table entitled Indefinite-Lived Intangibles, below.

60

At December 31, 2013, estimated future amortization of intangible assets was as follows:

(in thousands)

2014	$	7,078
2015	6,162
2016	5,905
2017	3,953
2018	3,059
Thereafter	9,950
	$	36,107

Indefinite-Lived Intangible Assets

As of December 31, 2013, two unrelated IPR&D assets totaled $5.1 million and were included in the Company’s Consolidated Balance Sheets as intangible assets. One IPR&D asset was valued at $3.4 million and has been substantially completed, with the Company anticipating sales in early 2014. The other IPR&D asset of $1.7 million requires further field testing and the Company anticipates substantial completion in 2015. The Company’s asset impairment assessment of these two IPR&D assets did not result in impairment in 2013.

The changes in the carrying amounts of indefinite-lived trade name and IPR&D assets not subject to amortization as of December 31, 2013, were as follows:

					Net
					Carrying
Indefinite-Lived Intangibles	Trade Name		IPR&D		Amount
Balance at December 31, 2012	$	—	$	—	$	—
Reclassifications (7)	616		4,742		5,358
Foreign exchange	—		308		308
Balance at December 31, 2013	$	616	$	5,050	$	5,666

(1)Reclassifications in 2012 related to finalizing accounting for acquisitions, including a $1.7 million increase to goodwill with a corresponding decrease in non-compete agreements, trademarks and other related to the Automatic Stamping acquisition, partly offset by $0.5 million decrease to goodwill with a corresponding increase in other noncurrent assets non-compete agreements, trademarks and other related to the Fox Industries acquisition.

(2)Revisions related to the Keymark acquisition included a $5.9 million increase in goodwill with a corresponding decrease in non-compete agreements, trademarks and other.

(3)Reclassifications in 2012 related to finalizing accounting for acquisitions, including a $1.2 million increase to unpatented technology with a corresponding decrease in non-compete agreements, trademarks and other related to the Keymark acquisition.

(4)Reclassifications in 2013 related to finalizing accounting for acquisitions, including increases of $12.8 million and $1.5 million related to the S&P Clever and CarbonWrap acquisitions, respectively, with a corresponding decrease in non-compete agreements, trademarks and other.

(5)Reclassifications in 2012 related to finalizing accounting for acquisitions, including increases of $1.3 million and $0.4 million to customer relations related to the Fox Industries and Automatic Stamping acquisitions, respectively, with a corresponding decrease in non-compete agreements, trademarks and other.

(6)Reclassifications in 2013 related to finalizing accounting for acquisitions, including a $1.9 million increase to customer relations related to the S&P Clever acquisition with a corresponding decrease in non-compete agreements, trademarks and other.

(7)Reclassifications in 2013 related to finalizing accounting for the S&P Clever acquisition, including increases to IPR&D indefinite-lived assets as well as the reclassification of the Quik-Drive trade name from other non-current assets.

61

Amortizable and indefinite-lived assets, net, by segment were as follows:

	At December 31, 2012
	Gross					Net
	Carrying		Accumulated			Carrying
Total Intangible Assets	Amount		Amortization			Amount
North America	$	37,992	$	(12,012	)	$	25,980
Europe	31,701		(7,083		)	24,618
Total	$	69,693	$	(19,095	)	$	50,598

	At December 31, 2013
	Gross					Net
	Carrying		Accumulated			Carrying
Total Intangible Assets	Amount		Amortization			Amount
North America	$	34,520	$	(15,909	)	$	18,611
Europe	33,217		(10,055		)	23,162
Total	$	67,737	$	(25,964	)	$	41,773

Adoption of Statements of Financial Accounting Standards

In February 2013, the FASB issued an amendment to the comprehensive income guidance requiring reporting of the effect of significant reclassifications out of other comprehensive income on the respective lines in net income if the amount being reclassified is required to be reclassified in its entirety to net income. For other amounts that are not required to be reclassified in their entirety to net income in the same reporting period, an entity is required to cross-reference other disclosures that provide additional information about these amounts. This amendment is effective for fiscal years beginning after December 15, 2012, and interim periods within those years. The implementation of this amended accounting guidance did not have a material effect on the Company’s consolidated financial position and results of operations.

In July 2013, the FASB issued an amendment to the income taxes guidance that applies to all entities. It is expected to reduce diversity in practice by providing guidance on the presentation of unrecognized tax benefits. The amendment is intended to better reflect the manner in which an entity would settle at the reporting date any additional income taxes that would result from the disallowance of a tax position related to net operating loss carryforwards, similar tax losses, or tax credit carryforwards. The Company’s early adoption and implementation of this amended accounting guidance did not have a material effect on the Company’s consolidated financial position and results of operations.

Recently Issued Accounting Standards

Recent authoritative guidance issued by the FASB (including technical corrections to the ASC), the American Institute of Certified Public Accountants, and the Securities and Exchange Commission did not or is not expected to have a material effect on the Company’s consolidated financial statements.

2.Acquisitions

In December 2011, the Company purchased the assets, net of certain liabilities, of Fox Industries, Inc., a Maryland corporation (“Fox Industries”), a manufacturer of construction products and systems for restoring, protecting and strengthening concrete. The acquisition broadened the Company’s concrete construction product line, while also extending the overall product line into more commercial, industrial and infrastructure markets. The purchase price was $8.7 million. The Company recorded goodwill of $3.9 million and intangible assets subject to amortization of $2.9 million in the North America segment, the amortization of which is deductible for income tax purposes. The weighted-average amortization period for the intangible assets is 9.7 years. Net tangible assets, including accounts receivable, inventory, certain prepaid expenses, machinery and equipment and certain liabilities, accounted for the balance of the purchase price.

In December 2011, the Company purchased the assets of Automatic Stamping, LLC and Automatic Stamping Auxiliary Services, LLC, both North Carolina limited liability companies, and certain real property and improvements owned by TIMMCO, Inc., a North Carolina corporation (collectively “Automatic Stamping”). Automatic Stamping was a manufacturer of truss plates. Combined with the Company’s truss design software, its

62

operating expertise and means of distribution, the Company plans to offer truss plates and software products to its North America customer base. The purchase price was $43.5 million. As a result of the acquisition, the Company has recorded goodwill of $29.5 million and intangible assets subject to amortization of $4.6 million in the North America segment, the amortization of which is deductible for income tax purposes. The weighted-average amortization period for the intangible assets is 4.8 years. Net tangible assets, including accounts receivable, inventory, land, building and machinery and equipment, accounted for the balance of the purchase price.

In January 2012, the Company purchased all of the shares of S&P Clever, for $58.1 million, subject to post-closing adjustments. S&P Clever manufactures and sells engineered materials to repair, strengthen and restore concrete, masonry and asphalt and has operations in Switzerland, Germany, Portugal, Poland, The Netherlands and Austria. Payments under the purchase agreement included cash payments of $57.5 million and contingent consideration of $0.6 million payable over a three-year period if sales goals are met. As a result of the acquisition, the Company has increased its presence in the infrastructure, commercial and industrial construction markets in Europe. The Company’s measurement of assets acquired and liabilities assumed included cash and cash equivalents of $6.8 million, other current assets of $10.8 million, non-current assets of $53.4 million, current liabilities of $12.6 million and non-current liabilities of $0.2 million. Included in non-current assets is goodwill of $19.3 million, which was assigned to the Europe segment and is not deductible for tax purposes, intangible assets of $20.5 million, the amortization of which is not deductible for tax purposes, and long-lived intangibles of $4.8 million related to IPR&D assets, which will be amortized when the Company markets the product for sale. The IPR&D assets at the time of acquisition were entering a field testing phase and were focused on new forms of strengthening structures. The weighted-average amortization period for the intangible assets is 9.8 years.

In March 2012, the Company purchased substantially all of the assets of CarbonWrap Solutions, L.L.C. (“CarbonWrap”) for $5.5 million, subject to post-closing adjustments. CarbonWrap develops fiber-reinforced polymer products primarily for infrastructure and transportation projects. Payments under the purchase agreement totaled $5.3 million in cash and contingent consideration of $0.2 million paid on resolution of specified post-closing contingencies to the principal officer of CarbonWrap, who, on closing, was employed by the Company. The Company’s measurement included goodwill of $3.5 million, which was assigned to the North American segment and is deductible for tax purposes, and intangible assets of $1.7 million, which is subject to tax-deductible amortization. Net tangible assets consisting of accounts receivable, inventory, equipment and prepaid expenses accounted for the balance of the purchase price. In December 2013, the Company sold the CarbonWrap product line for $3.3 million, net of termination expenses, and realized a gain of $1.4 million. See note 1 - Sale of Product Line.

In December 2012, the Company completed a transaction with Keymark Enterprises LLC (“Keymark”). In 2011, the Company had purchased various software assets from Keymark and had engaged Keymark to perform certain software development for the Company, for which the Company had agreed to compensate Keymark at rates equal to a multiple of Keymark’s costs. In the current transaction, the Company paid Keymark $9.1 million, hired thirty-nine Keymark employees to perform the development work that Keymark had previously been engaged to perform and purchased from Keymark various assets needed for that work. This transaction also included termination of the 2011 software development agreement and the Company is entitled to certain software license revenue that was previously received by Keymark. The Company’s measurement of the assets acquired included goodwill of $5.9 million, which was assigned to the North American segment and is deductible for tax purposes, and intangibles of $3.0 million, which is subject to tax-deductible amortization. Equipment and prepaid expenses accounted for the balance of the purchase. The weighted-average amortization period for the intangible assets is 4.9 years.

In February 2013, the Company purchased certain assets relating to the TJ® ShearBrace (“ShearBrace”) product line of Weyerhaeuser NR Company (“Weyerhaeuser”), a Washington corporation, for $5.3 million in cash. The ShearBrace is a line of pre-fabricated shearwalls that complement the Company’s Strong-Wall shearwall, and is sold throughout North America. The Company’s March 2013 provisional measurement of assets acquired included goodwill of $2.6 million, which was assigned to the North American segment, and intangible assets of $1.9 million, both of which are subject to tax-deductible amortization. The provisional measurement of the assets acquired was revised in the fourth quarter to include goodwill of $0.9 million and intangibles of $3.6 million, both of which are subject to tax-deductible amortization. Net tangible assets consisting of inventory and equipment accounted for the balance of the purchase price. The estimated weighted-average amortization period for the intangible assets is 13.4 years.

In November 2013, the Company purchased certain assets related to a connector product line from Bierbach GmbH & Co. KG (“Bierbach”), a Germany corporation, for $1.2 million in cash and a contingent liability of $0.8 million. Bierbach manufactured and sold a line of connectors, primarily in Germany. The Company’s provisional

63

measurement of assets acquired included goodwill of $0.7 million, which was assigned to the Europe segment, and intangible assets of $0.6 million, both of which are subject to tax-deductible amortization. Net tangible assets consisting of inventory and tool and dyes accounted for the balance of the purchase price.

The Company has not finalized the purchase price allocation for the businesses acquired in 2013, as the Company is still obtaining information and analyzing the fair value of certain assets.

Under the business combinations topic of the FASB ASC, the Company accounted for these acquisitions as business combinations and ascribed acquisition-date fair values to the acquired assets and assumed liabilities. Provisional fair value measurements were made in the first quarter and fourth quarter of 2013 for acquired assets and assumed liabilities. Adjustments to those measurements may be made in subsequent periods, up to one year from the acquisition date, as information necessary to complete the analysis is obtained. Fair value of intangible assets was based on Level 3 inputs. The Company expects the measurement process for each acquisition to be finalized within a year of its acquisition date.

The results of operations of the businesses acquired in 2013 are included in the Company’s consolidated results of operations since the date of the acquisition. Results of operations of acquired businesses for periods prior to 2013 were not material to the Company on an individual or aggregate basis, and accordingly, pro forma results of operations have not been presented.

3.Trade Accounts Receivable, net

Trade accounts receivable consisted of the following:

(in thousands)

	December 31,
	2013			2012
Trade accounts receivable	$	92,413		$	85,732
Allowance for doubtful accounts	(945		)	(1,288		)
Allowance for sales discounts	(1,451		)	(1,632		)
	$	90,017		$	82,812

The Company sells products on credit and generally does not require collateral.

4.Inventories

The components of inventories consisted of the following:

(in thousands)

	December 31,
	2013		2012
Raw materials	$	81,338	$	95,959
In-process products	18,475		16,878
Finished products	97,915		91,287
	$	197,728	$	204,124

64

5.Property, Plant and Equipment, net

Property, plant and equipment consisted of the following:

(in thousands)

	December 31,
	2013			2012
Land	$	29,347		$	32,068
Buildings and site improvements	178,391			174,187
Leasehold improvements	5,213			4,747
Machinery and equipment	225,831			214,222
	438,782			425,224
Less accumulated depreciation and amortization	(235,535		)	(217,868		)
	203,247			207,356
Capital projects in progress	6,286			6,096
	$	209,533		$	213,452

Included in property, plant and equipment at December 31, 2013 and 2012, are fully depreciated assets with an original cost of $147.9 million and $131.3 million, respectively. These fully depreciated assets are still in use in the Company’s operations.

Depreciation expense for the years ended December 31, 2013, 2012 and 2011, was $20.1 million, $19.0 million and $16.3 million, respectively.

6.Investments

During 2011, the Company purchased the software assets of Keymark valued at $11.5 million for $6.2 million in net cash payments and its 46.1% equity interest in Keymark. The transactions resulted in a gain of $4.3 million based on the difference between the fair value of the Company’s investment in Keymark less its carrying value of $1.0 million. The acquired software is used by customers of the Company in designing and engineering residential structures. (See Note 2).

7.Accrued Liabilities

Accrued liabilities consisted of the following:

(in thousands)

	December 31,
	2013		2012
Sales incentive and advertising accruals	$	22,195	$	17,076
Labor related liabilities	9,129		8,309
Dividend payable	6,095		6,053
Vacation liability	6,584		5,818
Other	7,742		7,667
	$	51,745	$	44,923

8.Debt

The Company has revolving lines of credit with various banks in the United States and Europe. Total available credit at December 31, 2013, was $304.4 million, including revolving credit lines and an irrevocable standby letter of credit in support of various insurance deductibles.

The Company’s primary credit facility is a revolving line of credit with $300.0 million in available credit. This credit facility will expire in July 2017. Amounts borrowed under this credit facility will bear interest at an annual rate equal to either, at the Company’s option, (a) the rate for Eurocurrency deposits for the corresponding deposits of U.S. dollars appearing on Reuters LIBOR01screen page (the “LIBOR Rate”), adjusted for any reserve requirement in effect, plus a spread of 0.60% to 1.45%, determined quarterly based on the Company’s leverage ratio (at

65

December 31, 2013, the LIBOR Rate was 0.77%), or (b) a base rate, plus a spread of 0.00% to 0.45%, determined quarterly based on the Company’s leverage ratio. The base rate is defined in a manner such that it will not be less than the LIBOR Rate. The Company will pay fees for standby letters of credit at an annual rate equal to the LIBOR Rate plus the applicable spread described above, and will pay market-based fees for commercial letters of credit. The Company is required to pay an annual facility fee of 0.15% to 0.30% of the available commitments under the credit agreement, regardless of usage, with the applicable fee determined on a quarterly basis based on the Company’s leverage ratio. The Company was also required to pay customary fees as specified in a separate fee agreement between the Company and Wells Fargo Bank, National Association, in its capacity as the Agent under the credit agreement.

The Company’s borrowing capacity under other revolving credit lines and a term note totaled $4.5 million at December 31, 2013. The other revolving credit lines and term note charge interest ranging from 1.084% to 7.25% and have maturity dates from March 2014 to December 2014. The Company had $0.1 million and $0.2 million outstanding at December 31, 2013 and 2012, respectively.

The Company and its subsidiaries are required to comply with various affirmative and negative covenants. The covenants include provisions that would limit the availability of funds as a result of a material adverse change to the Company’s financial position or results of operations. The Company was in compliance with its financial covenants under the loan agreement as of December 31, 2013.

The Company incurs interest costs, which include interest, maintenance fees and bank charges. The amount of costs incurred, capitalized, and expensed for the years ended December 31, 2013, 2012 and 2011, consisted of the following:

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Interest costs incurred	$	1,019		$	909		$	661
Less: Interest capitalized	(118		)	(116		)	(88		)
Interest expense	$	901		$	793		$	573

9.Commitments and Contingencies

Leases

Certain properties occupied by the Company are leased. The leases expire at various dates through 2022 and generally require the Company to assume the obligations for insurance, property taxes and maintenance of the facilities.

Rental expense for 2013, 2012 and 2011 with respect to all leased property was approximately $6.9 million, $6.9 million and $7.3 million, respectively.

At December 31, 2013, minimum rental commitments under all non-cancelable leases were as follows:

(in thousands)

2014	$	6,671
2015	4,904
2016	3,310
2017	2,113
2018	1,301
Thereafter	10
	$	18,309

Some of these minimum rental commitments contain renewal options and provide for periodic rental adjustments based on changes in the consumer price index or current market rental rates. Other rental commitments provide options to cancel early without penalty. Future minimum rental payments, under the earliest cancellation options, are included in minimum rental commitments in the table above.

66

Other Contractual Obligations

Purchase obligations consist of commitments primarily related to the acquisition, construction or expansion of facilities and equipment, consulting agreements, and minimum purchase quantities of certain raw materials. The Company is not a party to any long-term supply contracts with respect to the purchase of raw materials or finished goods. Debt interest obligations include interest payments on fixed-term debt, line-of-credit borrowings and annual facility fees on the Company’s primary line-of-credit facility. Interest on line-of-credit facilities was estimated based on historical borrowings and repayment patterns.

At December 31, 2013, other contractual obligations were as follows:

(in thousands)

			Debt
	Purchase		Interest
	Obligations		Obligations		Total
2014	$	14,775	$	450	$	15,225
2015	491		450		941
2016	42		450		492
2017	41		263		304
2018	41		—		41
Thereafter	—		—		—
	$	15,390	$	1,613	$	17,003

Employee Relations

Approximately 14% of the Company’s employees are represented by labor unions and are covered by collective bargaining agreements. Simpson Strong-Tie’s facility in San Bernardino County, California, has two of SST’s collective bargaining agreements, one with tool and die craftsmen and maintenance workers, and the other with sheetmetal workers. These two contracts expire March 2014 and June 2014, respectively. Negotiations with the tool and die craftsmen and maintenance workers are ongoing. Negotiations to extend the sheetmetal workers labor contract have not begun. Negotiations to extend these two contracts are not likely to have a material adverse effect on the Company’s ability to provide products to its customers or on the Company’s profitability, even if new agreements are not reached before the existing agreements expire. SST’s facility in Stockton, California, is also a union facility with two collective bargaining agreements, which also cover its tool and die craftsmen and maintenance workers, and its sheetmetal workers. These two contracts will expire June and September 2015, respectively.

Environmental

The Company’s policy with regard to environmental liabilities is to accrue for future environmental assessments and remediation costs when information becomes available that indicates that it is probable that the Company is liable for any related claims and assessments and the amount of the liability is reasonably estimable. The Company does not believe that these matters will have a material adverse effect on the Company’s financial condition, cash flows or results of operations.

Litigation

From time to time, the Company is involved in various legal proceedings and other matters arising in the normal course of business. The resolution of claims and litigation is subject to inherent uncertainty and could have a material adverse effect on the Company’s financial condition, cash flows and results of operations.

Pending Claims

Four lawsuits (the “Cases”) have been filed against the Company in the Hawaii First Circuit Court: Alvarez v. Haseko Homes, Inc. and Simpson Manufacturing, Inc., Civil No. 09-1-2697-11 (“Case 1”); Ke Noho Kai Development, LLC v. Simpson Strong-Tie Company, Inc., and Honolulu Wood Treating Co., LTD., Case No. 09-1-1491-06 SSM (“Case 2”); North American Specialty Ins. Co. v. Simpson Strong-Tie Company, Inc. and K.C. Metal Products, Inc., Case No. 09-1-1490-06 VSM (“Case 3”); and Charles et al. v. Haseko Homes, Inc. et al. and Third Party Plaintiffs Haseko Homes, Inc. et al. v. Simpson Strong-Tie Company, Inc., et al., Civil No. 09-1-1932-08 (“Case 4”).  Case 1 was filed on November 18, 2009.  Cases 2 and 3 were originally filed on June 30, 2009.  Case 4 was filed on August 19, 2009.  The Cases all relate to alleged premature corrosion of the Company’s strap tie holdown products installed in buildings in a housing development known as Ocean Pointe in Honolulu, Hawaii,

67

allegedly causing property damage.  Case 1 is a putative class action brought by the owners of allegedly affected Ocean Pointe houses.  Case 1 was originally filed as Kai et al. v. Haseko Homes, Inc., Haseko Construction, Inc. and Simpson Manufacturing, Inc., Case No. 09-1-1476, but was voluntarily dismissed and then re-filed with a new representative plaintiff.  Case 2 is an action by the builders and developers of Ocean Pointe against the Company, claiming that either the Company’s strap tie holdowns are defective in design or manufacture or the Company failed to provide adequate warnings regarding the products’ susceptibility to corrosion in certain environments.  Case 3 is a subrogation action brought by the insurance company for the builders and developers against the Company claiming the insurance company expended funds to correct problems allegedly caused by the Company’s products.  Case 4 is a putative class action brought, like Case 1, by owners of allegedly affected Ocean Pointe homes.  In Case 4, Haseko Homes, Inc. (“Haseko”), the developer of the Ocean Pointe development, brought a third party complaint against the Company alleging that any damages for which Haseko may be liable are actually the fault of the Company. Similarly, Haseko’s sub-contractors on the Ocean Pointe development brought cross-claims against the Company seeking indemnity and contribution for any amounts for which they may ultimately be found liable. None of the Cases alleges a specific amount of damages sought, although each of the Cases seeks compensatory damages, and Case 1 seeks punitive damages.  Cases 1 and 4 have been consolidated.  In December 2012, the Court granted the Company summary judgment on the claims asserted by the plaintiff homeowners in Cases 1 and 4, and on the third party complaint and cross-claims asserted by Haseko and the sub-contractors, respectively, in Case 4. In April 2013, the Court granted Haseko and the sub-contractors’ motion for leave to amend their cross-claims to allege a claim for negligent misrepresentation. The Company continues to investigate the facts underlying the claims asserted in the Cases, including, among other things, the cause of the alleged corrosion; the severity of any problems shown to exist; the buildings affected; the responsibility of the general contractor, various subcontractors and other construction professionals for the alleged damages; the amount, if any, of damages suffered; and the costs of repair, if needed.  At this time, the likelihood that the Company will be found liable under any legal theory and the extent of such liability, if any, are unknown.  Management believes the Cases may not be resolved for an extended period.  The Company is defending itself vigorously in connection with the Cases.

Based on facts currently known to the Company, the Company believes that all or part of the claims alleged in the Cases may be covered by its insurance policies.  On April 19, 2011, an action was filed in the United States District Court for the District of Hawaii, National Union Fire Insurance Company of Pittsburgh, PA v. Simpson Manufacturing Company, Inc., et al., Civil No. 11-00254 ACK.  In this action, Plaintiff National Union Fire Insurance Company of Pittsburgh, Pennsylvania (“National Union”), which issued certain Commercial General Liability insurance policies to the Company, seeks declaratory relief in the Cases with respect to its obligations to defend or indemnify the Company, Simpson Strong-Tie Company Inc., and a vendor of the Company’s strap tie holdown products.  By Order dated November 7, 2011, all proceedings in the National Union action have been stayed.  If the stay is lifted and the National Union action is not dismissed, the Company intends vigorously to defend all claims advanced by National Union.

On April 12, 2011, Fireman’s Fund Insurance Company (“Fireman’s Fund”), another of the Company’s general liability insurers, sued Hartford Fire Insurance Company (“Hartford”), a third insurance company from whom the Company purchased general liability insurance, in the United States District Court for the Northern District of California, Fireman’s Fund Insurance Company v. Hartford Fire Insurance Company, Civil No. 11 1789 SBA (the “Fireman’s Fund action”).  The Company has intervened in the Fireman’s Fund action and seeks a stay of proceedings in that action as well, pending resolution of the underlying Ocean Pointe cases.

On November 21, 2011, the Company commenced a lawsuit against National Union, Fireman’s Fund, Hartford and others in the Superior Court of the State of California in and for the City and County of San Francisco (the “San Francisco coverage action”).  In the San Francisco coverage action, the Company alleges generally that the separate pendency of the National Union action and the Fireman’s Fund action presents a risk of inconsistent adjudications; that the San Francisco Superior Court has jurisdiction over all of the parties and should exercise jurisdiction at the appropriate time to resolve any and all disputes that have arisen or may in the future arise among the Company and its liability insurers; and that the San Francisco coverage action should also be stayed pending resolution of the underlying Ocean Pointe Cases. The San Francisco coverage action has been ordered stayed pending resolution of the Cases.

Nishimura v. Gentry Homes, Ltd; Simpson Manufacturing Co., Inc.; and Simpson Strong-Tie Company, Inc., Civil no. 11-1-1522-07, was filed in the Circuit Court of the First Circuit of Hawaii on July 20, 2011.  The Nishimura case alleges premature corrosion of the Company’s strap tie holdown products in a housing development at Ewa Beach in Honolulu, Hawaii.  In February 2012, the Court dismissed three of the five claims the plaintiffs had asserted against the Company.  In December 2013, the Court granted the Company’s motion for summary judgment on the remaining claims.  Currently, the case is closed, though it remains subject to appeal.

68

With respect to these legal proceedings, individually and in the aggregate, the Company has not yet been able to determine whether an unfavorable outcome is probable or reasonably possible and has not been able to reasonably estimate the amount or range of any possible loss. As a result, no amounts have been accrued or disclosed in the accompanying consolidated financial statements with respect to these legal proceedings.

The Company is not engaged in any other legal proceedings as of the date hereof, which the Company expects individually or in the aggregate to have a material adverse effect on the Company’s financial condition, cash flows or results of operations. The resolution of claims and litigation is subject to inherent uncertainty and could have a material adverse effect on the Company’s financial condition, cash flows or results of operations.

Other

Corrosion, hydrogen enbrittlement, cracking, material hardness, wood pressure-treating chemicals, misinstallations, misuse, design and assembly flaws, manufacturing defects, environmental conditions or other factors can contribute to failure of fasteners, connectors, anchors, adhesives and tool products. On occasion, some of the products that the Company sells have failed, although the Company has not incurred any material liability resulting from those failures. The Company attempts to avoid such failures by establishing and monitoring appropriate product specifications, manufacturing quality control procedures, inspection procedures and information on appropriate installation methods and conditions. The Company subjects its products to extensive testing, with results and conclusions published in Company catalogues and on its websites. Based on test results to date, the Company believes that, generally, if its products are appropriately selected, installed and used in accordance with the Company’s guidance, they may be reliably used in appropriate applications.

10.Income Taxes

The provision for income taxes from operations consisted of the following:

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Current
Federal	$	19,804		$	13,163		$	21,040
State	3,243			2,732			4,427
Foreign	3,926			3,920			4,582
Deferred
Federal	3,646			(544		)	(574		)
State	404			(98		)	(358		)
Foreign	(430		)	830			(1,231		)
	$	30,593		$	20,003		$	27,886

Income and loss from operations before income taxes for the years ended December 31, 2013, 2012 and 2011, consisted of the following:

(in thousands)

	Years Ended December 31,
	2013		2012			2011
Domestic	$	74,912	$	65,705		$	68,961
Foreign	6,652		(3,784		)	9,825
	$	81,564	$	61,921		$	78,786

69

Reconciliations between the statutory federal income tax rates and the Company’s effective income tax rates as a percentage of income before income taxes for its operations were as follows:

(in thousands)

	Years Ended December 31,
	2013		2012		2011
Federal tax rate	35.0	%	35.0	%	35.0	%
State taxes, net of federal benefit	3.0	%	2.9	%	3.4	%
Tax benefit of domestic manufacturing deduction	(2.2	)%	(2.1	)%	(2.5	)%
Change in valuation allowance	1.3	%	6.0	%	(0.3	)%
Difference between United States statutory and foreign local tax rates	0.1	%	2.6	%	0.3	%
Change in uncertain tax position	(0.4	)%	(0.3	)%	—
Worthless stock deduction on Irish subsidiary	—		(15.4	)%	—
Non-deductible goodwill write-off	—		1.1	%	—
Non-deductible professional fee	—		1.3	%	—
Other	0.7	%	1.2	%	(0.5	)%
Effective income tax rate	37.5	%	32.3	%	35.4	%

In 2012, the Company recorded a worthless stock deduction for its investment in the Company’s wholly-owned Irish subsidiary. The deduction resulted in approximately $9.9 million tax benefit on the Company’s U.S. tax returns.

The tax effects of the significant temporary differences that constitute the deferred tax assets and liabilities at December 31, 2013, 2012 and 2011, were as follows:

(in thousands)

	December 31,
	2013			2012			2011
Current deferred tax assets
State tax	$	1,415		$	1,133		$	1,586
Workers’ compensation	1,780			1,814			2,123
Health claims	601			516			549
Vacation liability	1,219			1,037			865
Allowance for doubtful accounts	181			332			291
Inventories	6,691			5,713			4,796
Sales incentive and advertising allowances	516			580			408
Intangible rights write-off	—			—			194
Acquisition expenses	—			—			477
Unrealized foreign exchange gain or loss	124			39			57
Other, net	172			309			428
	$	12,699		$	11,473		$	11,774
Long-term deferred tax assets (liabilities)
Depreciation	$	(2,671	)	$	(2,434	)	$	(3,067	)
Goodwill and other intangibles amortization	(9,781		)	(4,086		)	(314		)
Deferred compensation related to stock options	6,104			7,296			5,485
Uncertain tax positions’ unrecognized tax benefits	1,532			1,140			1,115
Non-United States tax loss carry forward	5,472			8,064			5,912
Tax effect on cumulative translation adjustment	(729		)	(763		)	(812		)
Other	940			526			811
	867			9,743			9,130
Less valuation allowances	(5,546		)	(9,719		)	(6,279		)
	$	(4,679	)	$	24		$	2,851

The total deferred tax assets for the years ended December 31, 2013, 2012 and 2011, were $22.0 million, $21.6 million and $21.4 million, respectively. The total deferred tax liabilities for the years ended December 31, 2013, 2012, and 2011, were $14.0 million, $10.1 million and $6.7 million, respectively.

At December 31, 2013, the Company had $23.6 million of pre-tax loss carryforwards in various non-United States taxing jurisdictions, which excludes approximately $11.6 million that was generated by the Company’s now inactive

70

wholly owned Irish subsidiary. Tax loss carryforwards of $0.9 million, $0.7 million, $0.8 million, $1.7 million and $1.5 million will expire in 2014, 2015, 2016, 2017 and 2018, respectively, if not used. The remaining tax losses can be carried forward indefinitely.

At December 31, 2013 and 2012, the Company had deferred tax valuation allowances of $5.5 million and $9.7 million, respectively. The valuation allowance decreased $4.2 million and $0.9 million for the years ended December 31, 2013 and 2011, respectively, and increased $3.4 million for the year ended December 31, 2012. The decrease in valuation allowance from December 31, 2012, is mainly attributable to the removal of the deferred tax asset generated by the Company’s wholly owned Irish subsidiary.

The Company does not provide for federal income taxes on the undistributed earnings of its international subsidiaries because such earnings are reinvested and, in the Company’s opinion, will continue to be reinvested indefinitely. At December 31, 2013, 2012 and 2011, the Company had not provided for federal income taxes on undistributed earnings of $34.8 million, $29.0 million and $20.9 million, respectively, from its international subsidiaries. Should these earnings be distributed in the form of dividends or otherwise, the Company would be subject to both United States income taxes and withholding taxes in various international jurisdictions. These taxes may be partially offset by United States foreign tax credits. Determination of the related amount of unrecognized deferred United States income taxes is not practicable because of the complexities associated with this hypothetical calculation. United States federal income taxes are provided on the earnings of the Company’s foreign branches, which are included in the United States federal income tax return.

A reconciliation of the beginning and ending amounts of unrecognized tax benefits in 2013, 2012 and 2011 was as follows, including foreign translation amounts:

(in thousands)

	2013			2012			2011
Balance at January 1	$	3,843		$	4,683		$	5,862
Additions based on tax positions related to prior years	297			527			18
Reductions based on tax positions related to prior years	(494		)	(1,163		)	(681		)
Additions for tax positions of the current year	837			933			570
Settlements	(435		)	(486		)	(362		)
Lapse of statute of limitations	(592		)	(651		)	(724		)
Balance at December 31	$	3,456		$	3,843		$	4,683

Included in the balance of unrecognized tax benefits at December 31, 2013, 2012 and 2011, are tax positions of $0.7 million, $0.9 million and $1.1 million, respectively, which, if recognized, would reduce the effective tax rate.

The Company believes it is reasonably possible that the total amounts of unrecognized tax benefits will decrease by approximately $1.8 million within the next 12 months. The anticipated decrease is primarily attributable to unrecognized tax benefits relating to tax depreciation of certain categories of fixed assets in the U.S., tax benefits that the Company expects to recognize on filing an application for a change in accounting method in response to regulations issued by the IRS, and the effective settlement of tax positions as a result of the completion of an income tax audit.

The Company recognizes accrued interest and penalties related to unrecognized tax benefits in income tax expense, which is a continuation of the Company’s historical accounting policy. During the years ended December 31, 2013, 2012 and 2011, accrued interest decreased by $0.3 million, $0.4 million and $0.0 million, respectively, as a result of the reversal of accrued interest associated with the lapse of statutes of limitations. At December 31, 2013, 2012 and 2011, the Company had accrued $0.4 million, $0.7 million and $1.1 million, respectively, for the potential payment of interest, before income tax benefits.

At December 31, 2013, the Company remained subject to United States federal income tax examinations for the tax years 2010 through 2013. In addition, the Company remained subject to state, local and foreign income tax examinations primarily for the tax years 2008 through 2013.

71

11.Retirement Plans

The Company has six defined contribution retirement plans covering substantially all salaried employees and nonunion hourly employees. Two of the plans, covering United States employees, provide for annual contributions in amounts that the Board may authorize, subject to certain limitations, but in no event more than the amounts permitted under the Internal Revenue Code as deductible expense. The other four plans, covering the Company’s European and Canadian employees, require the Company to make contributions ranging from 3% to 15% of the employees’ compensation. The total cost for these retirement plans for the years ended December 31, 2013, 2012 and 2011, was $8.2 million, $7.7 million and $6.7 million, respectively.

The Company also contributes to various industry-wide, union-sponsored pension funds for hourly employees who are union members and a statutorily required pension fund for employees in Switzerland. Payments to these funds aggregated $2.2 million, $2.1 million and $1.8 million for the years ended December 31, 2013, 2012 and 2011, respectively.

12.Related Party Transactions

The Company paid an airplane charter company standard hourly rates when an airplane was hired for use by its Chairman and former Chief Executive Officer for travel between his home and Company offices or by him and other Company employees in travel on business. For each of the years ended December 31, 2012 and 2011, the total cost to the Company for this and other airplanes that were used was $0.5 million. Included in these amounts for the years ended December 31, 2012 and 2011, was $20 thousand and $30 thousand, respectively, paid to the Company’s Chairman and former Chief Executive Officer for compensation. The independent members of the Board unanimously approved this arrangement. The Company computed the compensation cost of the use of airplanes using the Standard Industrial Fare Level (“SIFL”) tables prescribed under applicable Internal Revenue Service regulations. Beginning in 2013, the Company no longer hires an airplane for its Chairman, but will reimburse him for the cost of his travel based on commercial flight rates to and from its offices or when he travels on Company business.

In March 2013, the Company extended its lease on a property in Addison, Illinois, which is co-owned by Gerald Hagel, a vice president of Simpson Strong-Tie since March 2007. The extension is for an additional five years through 2018. The Company paid $0.3 million in 2013 to lease the property from Mr. Hagel and his wife, Susan Hagel, a former employee of Simpson Strong-Tie.

In December 2009 and January 2010, the Company made loans of $0.7 million and $1.7 million to two entities related to Keymark. Both of these loans bore interest at an annual rate of 5.5%. The $1.7 million loan was repaid in July 2012 and the $0.7 million loan was repaid in January 2013.

In 2011, the Company paid Keymark $2.5 million for fees owed to Keymark for software development, and the Company purchased the software assets of Keymark valued at $11.5 million for $6.2 million in net cash payments and its 46.1% interest in Keymark. The Company no longer has an equity interest in Keymark or any remaining receivables from Keymark. See Note 6.

13.Stock-Based Compensation Plans

The Company has one stock-based incentive plan, which incorporates and supersedes its two previous plans (see Note 1 — Accounting for Stock-Based Compensation). Participants are granted stock-based awards only if the applicable Company-wide or profit-center operating goals, or both, or strategic goals, established by the Compensation and Leadership Development Committee of the Board of Directors at the beginning of the year, are met.

The fair value of each restricted stock unit award is estimated on the date of the award based on the closing market price of the underlying stock on the day preceding the date of the award. On February 3, 2014, 342,950 restricted stock units were awarded, including 9,975 awarded to the Company’s independent directors, at an estimated value of $32.60 per share, the closing price on January 31, 2014. The restrictions on these awards generally lapse one quarter on each of the date of the award and the first, second and third anniversaries of the date of the award. Restrictions on awards to three executive officers of the Company lapse three quarters on the third anniversary of the date of the award and one quarter on the fourth anniversary of the date of the award.

72

The following table summarizes the Company’s unvested restricted stock unit activity for the year ended December 31, 2013:

					Aggregate
			Weighted-		Intrinsic
	Shares		Average		Value *
Unvested Restricted Stock Units (RSUs)	(in thousands)		Price		(in thousands)
Outstanding at January 1, 2013	264		$	33.23
Awarded	359		31.96
Vested	(174	)	32.62
Forfeited	(1	)	32.47
Outstanding at December 31, 2013	448		$	32.48	$	16,447
Outstanding and expected to vest at December 31, 2013	436		$	32.45	$	16,021

*  The intrinsic value is calculated using the closing price per share of $36.73 as reported by the New York Stock Exchange on December 31, 2013.

The total intrinsic value of restricted stock units vested during the years ended December 31, 2013 and 2012, was $5.7 million and $3.1 million, respectively, based on the market value on the award date.

The fair value of each stock option award was estimated on the date of grant using the Black-Scholes option pricing model. Expected volatility is based on historical volatilities of the Company’s common stock measured monthly over a term that is equivalent to the expected life of the option. The expected terms of options are estimated based on the Company’s prior exercise experience and future expectations of the exercise and termination behavior of the grantees. The risk-free rate is based on the yield of United States Treasury zero-coupon bonds with maturities comparable to the expected life in effect at the time of grant. The dividend yield is based on the expected dividend rate on the grant date.

The assumptions used in the Black-Scholes option pricing model for options granted in 2011 were as follows:

Number		Risk-
of Options		Free
Granted	Grant	Interest		Dividend		Expected				Fair
(in thousands)	Date	Rate		Yield		Life	Volatility		Exercise Price	Value
1994 Plan
1,362	02/03/11	2.62	%	1.75	%	6.2 years	39.0	%	$29.66 to $32.63	$	10.33
1995 Plan
30	02/15/11	2.92	%	1.76	%	6.6 years	38.0	%	$29.58	$	10.49

No stock options were granted under the 2011 Plan in 2012 or 2013.

73

The following table summarizes the Company’s stock option activity for the year ended December 31, 2013:

					Weighted-
			Weighted-		Average	Aggregate
			Average		Remaining	Intrinsic
	Shares		Exercise		Contractual	Value*
Non-Qualified Stock Options	(in thousands)		Price		Life	(in thousands)
Outstanding at January 1, 2013	1,907		$	31.58	3.8	$	5,347
Exercised	(512	)	$	29.39
Forfeited	(374	)	$	40.65
Outstanding at December 31, 2013	1,021		$	29.35	4.0	$	7,539
Outstanding and expected to vest at December 31, 2013	1,003		$	29.35	4.0	$	7,404
Exercisable at December 31, 2013	573		$	29.14	3.9	$	4,352

* The intrinsic value represents the amount by which the fair market value of the underlying common stock exceeds the exercise price of the option, using the closing price per share of $36.73 as reported by the New York Stock Exchange on December 31, 2013.

The total intrinsic value of stock options exercised during the three years ended December 31, 2013, 2012 and 2011, was $2.6 million, $1.1 million and $0.1 million, respectively.

A summary of the status of unvested stock options as of December 31, 2013, and changes during the year ended December 31, 2013, is presented below:

			Weighted-
			Average
	Shares		Grant-Date
Unvested Options	(in thousands)		Fair Value
Unvested at January 1, 2013	826		$	10.25
Vested	(377	)	$	10.17
Forfeited	(1	)	$	10.33
Unvested at December 31, 2013	448		$	10.31

As of December 31, 2013, total unrecognized compensation cost of $18.1 million was related to unvested stock-based compensation arrangements expected to be awarded under the 2011 Plan and granted under the 1994 Plan. This cost is expected to be recognized over a weighted-average period of 1.5 years. Stock options granted under the 1995 Plan are fully vested and the associated expense is fully recognized as of the date of grant.

The Company also maintains a Stock Bonus Plan whereby it awards shares to employees, who do not otherwise participate in one of the Company’s stock-based incentive plans. The number of shares awarded, as well as the period of service, is determined by the Compensation and Leadership Development Committee of the Board. In 2013, 2012 and 2011, the Company issued, and committed to issue, 11 thousand, 9 thousand and 12 thousand shares, respectively, which resulted in pre-tax compensation charges of $0.7 million, $0.5 million and $0.7 million for the years ended December 31, 2013, 2012 and 2011, respectively. These employees are also awarded cash bonuses, which are included in these charges, to compensate for their income taxes payable as a result of the stock bonuses. Shares have been issued under this Plan in the year following the year in which the employee reached the tenth anniversary of employment with the Company.

14.          Segment Information

The Company is organized into three reporting segments. The segments are defined by the regions where the Company’s products are manufactured, marketed and distributed to the Company’s customers. The three regional segments are the North America segment, comprising primarily the United States and Canada, the Europe segment and the Asia/Pacific segment, comprising the Company’s operations in China, Hong Kong, the South Pacific and the

74

Middle East. These segments are similar in several ways, including the types of materials, the production processes, the distribution channels and the product applications.

The Administrative & All Other column primarily includes expenses such as self-insured workers compensation claims for employees of the Company’s venting business, which was sold in 2010, stock-based compensation for certain members of management, interest expense, foreign exchange gains or losses and income tax expense, as well as revenues and expenses related to real estate activities, such as rental income and depreciation expense on the Company’s property in Vacaville, California, which the Company has leased to a third party for a 10-year term expiring in August 2020.

The following table shows certain measurements used by management to assess the performance of the segments described above as of December 31, 2013, 2012 and 2011, or for the years then ended:

(in thousands)

	North				Asia/			Administrative
2013	America		Europe		Pacific			& All Other			Total
Net sales	$	572,789	$	117,799	$	14,793		$	948		$	706,329
Sales to other segments *	4,735		352		16,334			—			21,421
Income (loss) from operations	84,885		1,258		(2,202		)	(2,463		)	81,478
Depreciation and amortization	17,707		7,019		1,499			1,293			27,518
Impairment of long-lived asset	—		1,025		—			—			1,025
Significant non-cash charges	8,867		1,561		142			2,177			12,747
Provision for (benefit from) income taxes	26,372		2,906		(101		)	1,416			30,593
Capital expenditures and asset acquisitions, net of cash acquired	19,424		2,244		1,620			9			23,297
Total assets	627,196		201,384		31,560			93,473			953,613

	North					Asia/			Administrative
2012	America		Europe			Pacific			& All Other		Total
Net sales	$	522,895	$	122,549		$	10,843		$	949	$	657,236
Sales to other segments *	5,121		430			15,721			—		21,272
Income (loss) from operations	71,586		(8,095		)	(2,799		)	1,017		61,709
Depreciation and amortization	16,317		7,744			1,330			1,466		26,857
Impairment of goodwill	—		2,346			—			—		2,346
Impairment of long-lived asset	461		342			—			—		803
Significant non-cash charges	7,369		1,053			194			2,051		10,667
Provision for income taxes	15,037		3,544			323			1,099		20,003
Capital expenditures and asset acquisitions, net of cash acquired	23,014		63,156			916			—		87,086
Total assets	583,501		194,000			30,455			82,366		890,322

	North				Asia/			Administrative
2011	America		Europe		Pacific			& All Other			Total
Net sales	$	474,722	$	118,246	$	9,528		$	950		$	603,446
Sales to other segments *	4,805		575		11,359			—			16,739
Income (loss) from operations	75,350		1,296		(1,471		)	(1,118		)	74,057
Depreciation and amortization	13,194		4,849		1,211			1,497			20,751
Impairment of goodwill	—		1,282		—			—			1,282
Impairment of long-lived asset	1,094		—		—			—			1,094
Significant non-cash charges	4,464		966		129			1,278			6,837
Provision for (benefit from) income taxes	25,348		2,588		(805		)	755			27,886
Capital expenditures and asset acquisitions, net of cash acquired	72,291		5,062		544			19			77,916
Total assets	540,082		180,016		29,306			86,683			836,087

* Sales to other segments are eliminated on consolidation.

75

Cash collected by the Company’s United States subsidiaries is routinely transferred into the Company’s cash management accounts, and therefore has been included in the total assets of “Administrative & All Other.” Cash and short-term investment balances in “Administrative & All Other” were $156.0 million, $91.9 million and $68.5 million as of December 31, 2013, 2012 and 2011, respectively. As of December 31, 2013, the Company had $96.4 million or 38.4% of its cash and cash equivalents held outside the United States in accounts belonging to the Company’s various foreign operating entities. The majority of this balance is held in foreign currencies and could be subject to additional taxation if it were repatriated to the United States. The Company has no plans to repatriate cash and cash equivalents held outside the United States as the Company expects to use such funds for future international growth and acquisitions.

The significant non-cash charges comprise compensation related to the awards under the stock-based incentive plans and the stock bonus plan. The Company’s measure of profit or loss for its reportable segments is income (loss) from operations. The reconciling amounts between consolidated income before tax and consolidated income from operations are net interest income, which is primarily attributed to “Administrative & All Other” and loss from equity method investment, which is attributed to the North America segment.

The following table shows the geographic distribution of how the Company’s net sales and long-lived assets as of December 31, 2013, 2012 and 2011, or for the years then ended:

(in thousands)

	2013				2012				2011
	Net		Long-Lived		Net		Long-Lived		Net		Long-Lived
	Sales		Assets		Sales		Assets		Sales		Assets
United States	$	531,968	$	152,644	$	479,390	$	152,456	$	433,242	$	165,363
Canada	41,626		5,763		44,359		6,182		42,350		5,964
Denmark	14,993		1,907		15,096		2,252		17,158		2,607
United Kingdom	21,852		1,249		23,504		1,232		23,598		1,370
France	36,708		9,302		37,826		10,036		43,319		10,530
Germany	26,058		17,446		27,919		17,651		27,237		4,957
Switzerland	6,019		11,649		6,653		11,628		—		—
Poland	5,982		692		4,847		795		3,004		224
The Netherlands	4,306		63		3,336		92		—		—
Portugal	804		688		1,437		734		—		—
Ireland	31		—		791		2,757		2,720		3,075
China/Hong Kong	9,802		9,499		6,054		9,675		4,754		10,022
Australia	3,289		356		3,386		441		4,586		369
New Zealand	1,701		125		1,404		154		188		138
Other countries	1,190		739		1,234		577		1,290		560
	$	706,329	$	212,122	$	657,236	$	216,662	$	603,446	$	205,179

Net sales and long-lived assets, net of intangible assets, are attributable to the country where the operations are located.

The following table show the distribution of the Company’s net sales by product as of December 31, 2013, 2012 and 2011, or for the years then ended:

(in thousands)

	2013		2012		2011
Wood Construction	$	596,849	$	558,113	$	536,131
Concrete Construction	108,341		97,967		66,031
Other	1,139		1,156		1,284
Total	$	706,329	$	657,236	$	603,446

Wood construction products include connectors, truss plates, fastening systems, fasteners and pre-fabricated shearwalls and are used for connecting and strengthening wood-based construction primarily in the residential construction market. Concrete construction products include adhesives, specialty chemicals, mechanical anchors, carbide drill bits, powder actuated tools and reinforcing fiber materials and are used for restoration, protection or strengthening concrete, masonry and steel construction in residential, industrial, commercial and infrastructure construction.

76

The Company’s largest customer, attributable mostly to the North America segment, accounted for 10% of net sales for each of the years ended December 31, 2012 and 2011. No customer accounted for as much as 10% of net sales for the year ended December 31, 2013.

15.          Subsequent Events

At its meeting on February 3, 2014, the Company’s Board of Directors declared a cash dividend of $0.125 per share. The record date for the dividend will be April 3, 2014, and it will be paid on April 24, 2014. At the same meeting, the Board also authorized the Company to repurchase up to $50.0 million of the Company’s common stock. The authorization will remain in effect through the end of 2014.

16.          Selected Quarterly Financial Data (Unaudited)

The following table sets forth selected quarterly financial data for each of the quarters in 2013 and 2012:

(in thousands, except per share amounts)

	2013										2012
	Fourth		Third			Second		First			Fourth			Third		Second			First
	Quarter		Quarter			Quarter		Quarter			Quarter			Quarter		Quarter			Quarter
Net sales	$	160,322	$	195,877		$	195,596	$	154,535		$	144,686		$	172,113	$	181,703		$	158,734
Cost of sales	90,331		105,724			106,176		89,561			89,482			96,390		98,557			89,329
Gross profit	69,991		90,153			89,420		64,974			55,204			75,723		83,146			69,405
Research and development and other engineering	9,825		9,226			9,484		8,308			8,763			8,916		9,043			9,198
Selling	21,448		20,630			21,652		21,371			21,109			20,941		19,881			20,432
General and administrative	25,411		28,781			28,595		26,290			23,799			23,843		27,087			26,244
Impairment of goodwill	—		—			—		—			2,346			—		—			—
Loss (gain) on sale of assets	1,404		631			11		(8		)	124			33		(13		)	23
Income (loss) from operations	11,903		30,885			29,678		9,013			(937		)	21,990		27,148			13,508
Interest income, net	54		(9		)	1		38			35			55		58			65
Income (loss) before income taxes	11,957		30,876			29,679		9,051			(902		)	22,045		27,206			13,573
Provision for (benefit from) income taxes	4,289		10,870			11,177		4,256			(6,785		)	9,069		11,347			6,372
Net income	$	7,668	$	20,006		$	18,502	$	4,795		$	5,883		$	12,976	$	15,859		$	7,201
Earnings per common share:
Basic	$	0.16	$	0.41		$	0.38	$	0.10		$	0.12		$	0.27	$	0.33		$	0.15
Diluted	0.16		0.41			0.38		0.10			0.12			0.27		0.33			0.15
Cash dividends declared per common share	$	0.125	$	0.125		$	0.125	$	—		$	0.25		$	0.125	$	0.125		$	0.125

Basic and diluted income per common share for each of the quarters presented above is based on the respective weighted average numbers of common and dilutive potential common shares outstanding for each quarter, and the sum of the quarters may not necessarily be equal to the full year basic and diluted net income per common share amounts.

77

SCHEDULE II

Simpson Manufacturing Co., Inc. and Subsidiaries

VALUATION AND QUALIFYING ACCOUNTS

for the years ended December 31, 2013, 2012 and 2011

Column A	Column B		Column C					Column D		Column E
			Additions
			Charged			Charged
	Balance at		to Costs			to Other				Balance
(in thousands)	Beginning		and			Accounts —				at End
Classification	of Year		Expenses			Write-offs		Deductions		of Year
Year Ended December 31, 2013
Allowance for doubtful accounts	$	1,287	$	(48	)	$	—	$	294	$	945
Allowance for sales discounts	1,632		(181		)	—		—		1,451
Allowance for deferred tax assets	9,720		1,458			—		5,632		5,546
Year Ended December 31, 2012
Allowance for doubtful accounts	991		355			—		59		1,287
Allowance for sales discounts	1,231		401			—		—		1,632
Allowance for deferred tax assets	6,279		3,600			—		159		9,720
Year Ended December 31, 2011
Allowance for doubtful accounts	1,344		67			—		420		991
Allowance for sales discounts	1,181		50			—		—		1,231
Allowance for deferred tax assets	7,167		1,082			—		1,970		6,279

78

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosures.

None.

Item 9A.  Controls and Procedures.

Disclosure Controls and Procedures. As of December 31, 2013, the Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the chief executive officer (“CEO”) and the chief financial officer (“CFO”), of the effectiveness of the Company’s disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)). Disclosure controls and procedures are controls and other procedures designed reasonably to assure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act, such as this Annual Report on Form 10-K, is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms. Disclosure controls and procedures are also designed reasonably to assure that this information is accumulated and communicated to the Company’s management, including the CEO and the CFO, as appropriate to allow timely decisions regarding required disclosure.

The Company’s management, including the CEO and the CFO, does not, however, expect that the Company’s disclosure controls and procedures or the Company’s internal control over financial reporting will necessarily prevent all fraud and material errors. Internal control over financial reporting, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. In addition, the design of a control system must reflect the facts that there are resource constraints and that the benefits of controls must be considered relative to their costs. The inherent limitations in internal control over financial reporting include the realities that judgments can be faulty and that breakdowns can occur because of simple error or mistake. Controls also can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of controls. The design of any system of internal control is also based in part on assumptions about the likelihood of future events, and there can be only reasonable, not absolute, assurance that any design will succeed in achieving its stated goals under all potential events and conditions. Over time, controls may become inadequate because of changes in circumstances, or the degree of compliance with the policies and procedures may deteriorate.

Based on the Company’s evaluation, the Company’s CEO and CFO concluded that, as of December 31, 2013, the Company’s disclosure controls and procedures were not effective as a result of the material weaknesses that existed in its internal control over financial reporting as described below in Management’s Report on Internal Control over Financial Reporting.

Notwithstanding the material weaknesses discussed below, the Company’s management, including the CEO and CFO, concluded that the consolidated financial statements in this Annual Report on Form 10-K fairly present, in all material respects, the Company’s financial condition, results of operations and cash flows for the periods presented, in conformity with accounting principles generally accepted in the United States (“GAAP”).

Management’s Report on Internal Control over Financial Reporting. The Company’s management is responsible for establishing and maintaining adequate internal control over financial reporting. The Company’s internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of the Company’s financial reporting and the preparation of financial statements for external purposes in accordance with GAAP.

The Company’s management assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2013, using the criteria established in Internal Control—Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Based on that evaluation, management concluded that the Company did not maintain effective internal control over financial reporting as of December 31, 2013, due to the material weaknesses described below. A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis. Management identified the following material weaknesses as of December 31, 2013:

(a) The Company’s management did not design and maintain effective controls over the valuation of goodwill. Specifically, management did not design a review precise enough to determine the accuracy and support of certain forecasts and assumptions related to the goodwill impairment assessments. This material weakness resulted in errors in the Company’s step-one goodwill impairment models, which were not detected by its internal control review process.

79

(b) The Company’s management did not design and maintain effective internal controls related to the valuation of indefinite-lived in-process research and development intangible assets. Specifically, management did not design a process or controls to evaluate impairments at the individual asset level in accordance with GAAP.

While the Company’s management concluded that these material weaknesses did not result in any misstatements, they could result in a misstatement of the aforementioned account balances or disclosures that would result in a material misstatement in the annual or interim consolidated financial statements that would not be prevented or detected.

PricewaterhouseCoopers LLP, an independent registered public accounting firm that audited the Company’s consolidated financial statements included in this annual report on Form 10-K, has also audited the effectiveness of the Company’s internal control over financial reporting as of December 31, 2013, which is included herein.

Management’s Plan for Remediation. The Company’s management has been actively engaged in developing a comprehensive remediation plan to address fully the material weaknesses. Remediation efforts are expected to be completed by the end of the second quarter of 2014 and to include the following:

·      enhance the controls over the review of the goodwill assessment for impairment, determining that management forecasts and assumptions do not contain input errors; and

·      design an appropriate process and controls to evaluate indefinite-lived intangible assets for impairment in accordance with GAAP.

The Company’s management believes the foregoing efforts will effectively remediate the material weaknesses. As management continues to evaluate and work to improve the Company’s internal control over financial reporting, management may determine to take additional measures to address the material weaknesses or determine to modify the remediation plan described above.

Changes in Internal Control over Financial Reporting. During the three months ended December 31, 2013, the Company made no changes to its internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act), that have materially affected, or are reasonably likely to materially affect, its internal control over financial reporting.

Item 9B. Other Information.

None.

80

PART III

Item 10. Directors, Executive Officers and Corporate Governance.

Information required by this Item will be contained in the Company’s proxy statement for the annual meeting of its stockholders to be held on April 22, 2014, to be filed with the Securities and Exchange Commission not later than 120 days following the end of the Company’s fiscal year ended December 31, 2013, which information is incorporated herein by reference.

Item 11. Executive Compensation.

Information required by this Item will be contained in the Company’s proxy statement for the annual meeting of its stockholders to be held on April 22, 2014, to be filed with the Securities and Exchange Commission not later than 120 days following the end of the Company’s fiscal year ended December 31, 2013, which information is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

Certain information required by this Item will be contained in the Company’s proxy statement for the annual meeting of its stockholders to be held on April 22, 2014, to be filed with the Securities and Exchange Commission not later than 120 days following the end of the Company’s fiscal year ended December 31, 2013, which information is incorporated herein by reference. The other information required by this Item appears in this report under “Item 5 — Market for Company’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities,” which is incorporated herein by reference.

Item 13. Certain Relationships and Related Transactions, and Director Independence.

Information required by this Item will be contained in the Company’s proxy statement for the annual meeting of its stockholders to be held on April 22, 2014, to be filed with the Securities and Exchange Commission not later than 120 days following the end of the Company’s fiscal year ended December 31, 2013, which information is incorporated herein by reference.

Item 14. Principal Accounting Fees and Services.

Information required by this Item will be contained in the Company’s proxy statement for the annual meeting of its stockholders to be held on April 22, 2014, to be filed with the Securities and Exchange Commission not later than 120 days following the end of the Company’s fiscal year ended December 31, 2013, which information is incorporated herein by reference.

81

PART IV

Item 15. Exhibits and Financial Statement Schedules.

(a)   The following documents are filed as part of this Annual Report:

1.     Consolidated financial statements

The following consolidated financial statements are filed as a part of this report:

Report of Independent Registered Public Accounting Firm

Consolidated Balance Sheets as of December 31, 2013 and 2012

Consolidated Statements of Operations for the years ended December 31, 2013, 2012 and 2011

Consolidated Statements of Comprehensive Income for the years ended December 31, 2013, 2012 and 2011

Consolidated Statements of Stockholders’ Equity for the years ended December 31, 2011, 2012 and 2013

Consolidated Statements of Cash Flows for the years ended December 31, 2013, 2012 and 2011

Notes to Consolidated Financial Statements

2.     Financial Statement Schedules

The following consolidated financial statement schedule for each of the years in the three-year period ended December 31, 2013, is filed as part of this Annual Report:

Schedule II—Valuation and Qualifying Accounts—Years ended December 31, 2013, 2012 and 2011

All other schedules have been omitted as the required information is not present or is not present in amounts sufficient to require submission of the schedule, or because the information required is included in the consolidated financial statements and notes thereto.

(b)   Exhibits

The following exhibits are either incorporated by reference into this report or filed with this report, as indicated below.

3.1Certificate of Incorporation of Simpson Manufacturing Co., Inc., as amended, is incorporated by reference to Exhibit 3.1 of its Quarterly Report on Form 10-Q for the quarter ended September 30, 2007.

3.2Bylaws of Simpson Manufacturing Co., Inc., as amended through February 3, 2014, are incorporated by reference to Exhibit 3.2 of its Current Report on Form 8-K dated February 3, 2014.

4.1Amended Rights Agreement dated as of June 15, 2009, between Simpson Manufacturing Co., Inc. and Computershare Trust Company, N.A., which includes as Exhibit B the form of Rights Certificate, is incorporated by reference to Exhibit 4.1 of Simpson Manufacturing Co., Inc.’s Registration Statement on Form 8-A/A dated June 15, 2009.

4.2Certificate of Designation, Preferences and Rights of Series A Participating Preferred Stock of Simpson Manufacturing Co., Inc., dated July 30, 1999, is incorporated by reference to Exhibit 4.2 of its Registration Statement on Form 8-A dated August 4, 1999.

4.3Simpson Manufacturing Co., Inc. 401(k) Profit Sharing Plan for Salaried Employees is incorporated by reference to Exhibit 4.3 of Simpson Manufacturing Co., Inc.’s Registration Statement on Form

S-8, File Number 333-173811, dated April 29, 2011.

4.4Simpson Manufacturing Co., Inc. 401(k) Profit Sharing Plan for Hourly Employees is incorporated by reference to Exhibit 4.4 of Simpson Manufacturing Co., Inc.’s Registration Statement on Form

S-8, File Number 333-173811, dated April 29, 2011.

82

10.1Simpson Manufacturing Co., Inc. 1994 Stock Option Plan, as amended through February 13, 2008, is incorporated by reference to Exhibit 10.1 of Simpson Manufacturing Co., Inc.’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2008.

10.2Simpson Manufacturing Co., Inc. 1995 Independent Director Stock Option Plan, as amended through November 18, 2004, is incorporated by reference to Exhibit 10.2 of Simpson Manufacturing Co., Inc.’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2008.

10.3Simpson Manufacturing Co., Inc. Executive Officer Cash Profit Sharing Plan, as amended through February 25, 2008, is incorporated by reference to Exhibit 10.3 of Simpson Manufacturing Co., Inc.’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2008.

10.4Credit Agreement, dated as of July 27, 2012, among Simpson Manufacturing Co., Inc. as Borrower, the Lenders party thereto, Wells Fargo Bank, National Association, in its separate capacities as Swing Line Lender and L/C issuer and as Administrative Agent, and Simpson Strong-Tie Company Inc., and Simpson Strong-Tie International, Inc. as Guarantors, is incorporated by reference to Exhibit 10.1 of Simpson Manufacturing Co., Inc.’s Current Report on Form 8-K dated August 1, 2012

10.5Form of Indemnification Agreement between Simpson Manufacturing Co., Inc. and its directors and executive officers, as well as the officers of Simpson Strong-Tie Company Inc., is incorporated by reference to Exhibit 10.2 of Simpson Manufacturing Co., Inc.’s Annual Report on Form 10-K for the year ended December 31, 2004.

10.6Compensation of Named Executive Officers is incorporated by reference to Exhibit 10 of Simpson Manufacturing Co., Inc.’s Current Report on Form 8-K dated December 11, 2013.

10.7Simpson Manufacturing Co., Inc. 2011 Incentive Plan is incorporated by reference to Exhibit A of Simpson Manufacturing Co., Inc.’s Schedule 14A Proxy Statement dated March 10, 2011.

10.8Separation agreement dated as of July 3, 2013, between Michael J. Herbert, Vice President of Simpson Manufacturing Co., Inc., on the one hand, and Simpson Manufacturing Co., Inc., on the other hand, is incorporated by reference to Exhibit 10.11 of Simpson Manufacturing Co., Inc.’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2013.

21.List of Subsidiaries of the Registrant is filed herewith.

23.Consent of Independent Registered Public Accounting Firm is filed herewith.

31.Rule 13a-14(a)/15d-14(a) Certifications are filed herewith.

32.Section 1350 Certifications are filed herewith.

99.1Simpson Manufacturing Co., Inc. 1994 Employee Stock Bonus Plan, as amended through November 18, 2004, is incorporated by reference to Exhibit 99.1 of Simpson Manufacturing Co., Inc.’s Annual Report on Form 10-K for the year ended December 31, 2007.

101Financial statements from the annual report on Form 10-K of Simpson Manufacturing Co., Inc. for the year ended December 31, 2013, formatted in XBRL, are filed herewith and include: (i) the Consolidated Balance Sheets, (ii) the Consolidated Statements of Operations, (iii) the Statement of Comprehensive Income, (iv) the Consolidated Statements of Stockholders’ Equity, (v) the Consolidated Statements of Cash Flows and (vi) the Notes to Consolidated Financial Statements.

83

SIGNATURES

Pursuant to the requirements Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Dated: March 7, 2014		Simpson Manufacturing Co., Inc.
		(Registrant)
	By	/s/Brian Magstadt
		Brian Magstadt
		Chief Financial Officer
		and Duly Authorized Officer
		of the Registrant
		(principal accounting and financial officer)

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated below.

Signature	Title	Date
Chief Executive Officer:
/s/Karen Colonias	President, Chief Executive	March 7, 2014
(Karen Colonias)	Officer and Director
Chief Financial Officer:
/s/Brian Magstadt	Chief Financial Officer,	March 7, 2014
(Brian Magstadt)	Treasurer and Secretary
	(principal accounting and financial officer)
Directors:
/s/Thomas J Fitzmyers	Chairman of the Board	March 7, 2014
(Thomas J Fitzmyers)	and Director
/s/James S. Andrasick	Director	March 7, 2014
(James S. Andrasick)
/s/Jennifer A. Chatman	Director	March 7, 2014
(Jennifer A. Chatman)
/s/Earl F. Cheit	Director	March 7, 2014
(Earl F. Cheit)
/s/Gary M. Cusumano	Director	March 7, 2014
(Gary M. Cusumano)
/s/Peter N. Louras	Director	March 7, 2014
(Peter N. Louras)
/s/Robin G. MacGillivray	Director	March 7, 2014
(Robin G. MacGillivray)
/s/Barry Lawson Williams	Director	March 7, 2014
(Barry Lawson Williams)

84

EX-21

Exhibit 21

Simpson Manufacturing Co., Inc. and Subsidiaries

List of Subsidiaries of Simpson Manufacturing Co., Inc.

At March 7, 2014

1.             Simpson Strong-Tie Company Inc., a California corporation

2.             Simpson Strong-Tie International, Inc., a California corporation

3.             Simpson Strong-Tie Canada, Limited, a Canadian corporation

4.             Simpson Strong-Tie Europe EURL, a French corporation

5.             Simpson Strong-Tie, S.A.S., a French corporation

6.             Simpson Strong-Tie Japan, Inc., a California corporation

7.             Simpson Strong-Tie Australia, Inc., a California corporation

8.             Simpson Strong-Tie A/S, a Danish corporation

9.             Simpson Strong-Tie GmbH, a German corporation

10.          Simpson Strong-Tie Sp.z,o.o., a Polish corporation

11.          Simpson France SCI, a French corporation

12.          Simpson Strong-Tie Australia Pty Limited, an Australian corporation

13.Simpson Strong-Tie Asia Limited, a Hong Kong company

14.Simpson Strong-Tie Asia Holding Limited, a Hong Kong company

15.Simpson Strong-Tie (Beijing) Company Limited, a Chinese company

16.Simpson Strong-Tie (Zhangjiagang) Co., Ltd., a Chinese company

17.Simpson Strong-Tie Ireland Limited, an Irish company

18.Simpson Strong-Tie GmbH, a German company

19.Simpson Strong-Tie s.r.o., a Czech company

20.Societe Civile Immobiliere IMAG SCI, a French corporation

21.Socom S.A.S., a French corporation

22.Simpson Strong-Tie (New Zealand) Limited, a New Zealand company

23.Simpson Strong-Tie Switzerland GmbH, a Switzerland company

24.S&P Clever Reinforcement Company AG, a Switzerland company

25.S&P Handels GmbH, an Austrian company

26.S&P Clever Reinforcement GmbH, a Germany company

27.S&P Clever Reinforcement Company Benelux B.V., a Dutch company

28.S&P Polska Sp. z o.o., a Polish corporation

29.Clever Reinforcement Iberica — Materiais de Construção, Lda., a Portugal private limited liability company

30.S&P Reinforcement France, a French company

31.Simpson Strong-Tie (Thailand) Co., Ltd, a Thai company

32.Simpson Strong-Tie Vietnam Company Limited, a Vietnam company

33.Simpson Strong-Tie South Africa (PTY) Ltd, a South Africa company

34.Simpson Strong-Tie Chile Limitada, a Chile company

EX-23

Exhibit 23

Consent of Independent Registered Public Accounting Firm

We hereby consent to the incorporation by reference in the Registration Statements on Form S-8 (Registration Nos. 033-85662, 033-90964, 333-37325, 333-40858, 333-97313, 333-97315, and 333-173811) of Simpson Manufacturing Co., Inc. of our report dated March 7, 2014, relating to the financial statements, financial statement schedule, and the effectiveness of internal control over financial reporting, which appears in this Form 10-K.

/s/PricewaterhouseCoopers LLP

San Francisco, California

March 7, 2014

EX-31

Exhibit 31

Simpson Manufacturing Co., Inc. and Subsidiaries

Rule 13a-14(a)/15d-14(a) Certifications

I, Karen Colonias, certify that:

1.I have reviewed this annual report on Form 10-K of Simpson Manufacturing Co., Inc.;

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

(a)All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

(b)Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

DATE:	March 7, 2014	By	/s/Karen Colonias
		Karen Colonias
		Chief Executive Officer

Simpson Manufacturing Co., Inc. and Subsidiaries

Rule 13a-14(a)/15d-14(a) Certifications

I, Brian Magstadt, certify that:

1.I have reviewed this annual report on Form 10-K of Simpson Manufacturing Co., Inc.;

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

(a)   All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

(b)Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

DATE:	March 7, 2014	By	/s/Brian Magstadt
		Brian Magstadt
		Chief Financial Officer

EX-32

Exhibit 32

Simpson Manufacturing Co., Inc. and Subsidiaries

Section 1350 Certifications

The undersigned, Karen Colonias and Brian Magstadt, being the duly elected and acting Chief Executive Officer and Chief Financial Officer, respectively, of Simpson Manufacturing Co., Inc., a Delaware corporation (the “Company”), hereby certify that the annual report of the Company on Form 10-K for the year ended December 31, 2013, fully complies with the requirements of section 13(a) of the Securities Exchange Act of 1934, as amended, and that information contained in such report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Dated:	March 7, 2014	/s/ Karen Colonias
		Karen Colonias
		/s/Brian Magstadt
		Brian Magstadt

A signed original of this written statement required by Section 1350 of Chapter 63 of Title 18 of the United States Code has been provided to Simpson Manufacturing Co., Inc. and will be retained by Simpson Manufacturing Co., Inc. and furnished to the Securities and Exchange Commission or its staff on request.

XML

Operations and Summary of Significant Accounting Policies (Details) (USD $)	12 Months Ended
	Dec. 31, 2013 item	Dec. 31, 2011	Dec. 31, 2012 item
Operations and Summary of Significant Accounting Policies
High end of the range of the required percentage voting interest held to account for investments with the equity method of accounting	50.00%
Number of VIEs	0		0
Reclassification
Write down of excess and obsolete inventory		$ 700,000
Increase in inventory due to reclassification		700,000
Allowance for Doubtful Accounts
Percentage reserved for accounts receivable due from customers in deteriorating financial condition	100.00%
Fair Value of Financial Instruments
United States Treasury securities and money market funds included in cash equivalents	$ 117,571,000		$ 76,130,000
Minimum | Software
Depreciation and Amortization
Estimated useful life	3 years
Minimum | Machinery and equipment
Depreciation and Amortization
Estimated useful life	3 years
Minimum | Buildings and site improvements
Depreciation and Amortization
Estimated useful life	15 years
Maximum
Revenue Recognition
Service sales as a percentage of net sales	1.00%
Maximum | Software
Depreciation and Amortization
Estimated useful life	5 years
Maximum | Machinery and equipment
Depreciation and Amortization
Estimated useful life	10 years
Maximum | Buildings and site improvements
Depreciation and Amortization
Estimated useful life	45 years

XML

Debt (Details) (USD $)	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Debt
Credit facility, maximum borrowing capacity	$ 304,400,000
Amount of interest costs incurred, capitalized, and expensed
Interest costs incurred	1,019,000	909,000	661,000
Less: Interest capitalized	(118,000)	(116,000)	(88,000)
Interest expense	901,000	793,000	573,000
Primary revolving line of credit
Debt
Credit facility, maximum borrowing capacity	300,000,000
Primary revolving line of credit | Maximum
Debt
Credit facility, interest rate spread (as a percent)	0.45%
Facility fees on the available commitment of the facility (as a percent)	0.30%
Primary revolving line of credit | Minimum
Debt
Credit facility, interest rate spread (as a percent)	0.00%
Facility fees on the available commitment of the facility (as a percent)	0.15%
Primary revolving line of credit | LIBOR
Debt
Credit facility, interest rate basis	LIBOR
LIBOR Rate at end of period (as a percent)	0.77%
Primary revolving line of credit | LIBOR | Maximum
Debt
Credit facility, interest rate spread (as a percent)	1.45%
Primary revolving line of credit | LIBOR | Minimum
Debt
Credit facility, interest rate spread (as a percent)	0.60%
Primary revolving line of credit | Base rate
Debt
Credit facility, interest rate basis	Base rate
Other revolving credit lines and long term debt
Debt
Total Borrowing Capacity	4,500,000
Credit facility, interest rate low end of range (as a percent)	1.084%
Credit facility, interest rate high end of range (as a percent)	7.25%
Total outstanding balances	$ 100,000	$ 200,000

XML

Acquisitions (Details) (USD $)	12 Months Ended			1 Months Ended		1 Months Ended								1 Months Ended		1 Months Ended		1 Months Ended		1 Months Ended		1 Months Ended	3 Months Ended		1 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011	Dec. 31, 2013 CarbonWrap product line	Dec. 31, 2011 Keymark	Dec. 31, 2012 Keymark Software development item	Dec. 31, 2013 Europe	Dec. 31, 2012 Europe	Dec. 31, 2011 Europe	Dec. 31, 2013 North America	Dec. 31, 2012 North America	Dec. 31, 2011 North America	Dec. 31, 2012 North America Keymark Software development	Dec. 31, 2011 Fox Industries, Inc. Simpson Strong Tie	Dec. 31, 2011 Fox Industries, Inc. North America Simpson Strong Tie	Dec. 31, 2011 Automatic Stamping and Automatic Stamping Auxiliary Services Simpson Strong Tie	Dec. 31, 2011 Automatic Stamping and Automatic Stamping Auxiliary Services North America Simpson Strong Tie	Jan. 31, 2012 S&P Clever	Jan. 31, 2012 S&P Clever Europe	Mar. 31, 2012 CarbonWrap Solutions, L.L.C	Mar. 31, 2012 CarbonWrap Solutions, L.L.C North America	Feb. 28, 2013 ShearBrace	Dec. 31, 2013 ShearBrace	Feb. 28, 2013 ShearBrace North America	Nov. 30, 2013 Bierbach	Nov. 30, 2013 Bierbach Europe
Acquisitions
Purchase price														$ 8,700,000		$ 43,500,000		$ 58,100,000		$ 5,500,000
Cash paid for acquisition																		57,500,000		5,300,000		5,300,000			1,200,000
Contingent consideration payable																		600,000		200,000					800,000
Maximum period for payment of contingent consideration																		3 years
Cash and cash equivalent																		6,800,000
Other current assets																		10,800,000
Non-current assets																		53,400,000
Current liabilities																		12,600,000
Non-current liabilities																		200,000
Goodwill	129,218,000	121,981,000	99,849,000				42,690,000	41,263,000	24,000,000	84,822,000	78,739,000	73,901,000	5,900,000		3,900,000		29,500,000		19,300,000		3,500,000		900,000	2,600,000		700,000
Intangible assets						3,000,000									2,900,000		4,600,000	20,500,000		1,700,000		1,900,000	3,600,000		600,000
Sale proceeds				3,800,000
Gain from discontinued operations, before income taxes				1,400,000
Long-lived intangibles related to in-progress product development																		4,800,000
Weighted-average amortization period						4 years 10 months 24 days								9 years 8 months 12 days		4 years 9 months 18 days		9 years 9 months 18 days					13 years 4 months 24 days
Amount paid					$ 11,500,000	$ 9,100,000
Number of employees hired to perform development work						39
Maximum period for payment for adjustments to provisional fair value measurements	1 year

XML

Commitments and Contingencies (Details) (USD $)	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Commitments and Contingencies
Rental expense	$ 6,900,000	$ 6,900,000	$ 7,300,000
Minimum rental commitments
2014	6,671,000
2015	4,904,000
2016	3,310,000
2017	2,113,000
2018	1,301,000
Thereafter	10,000
Minimum rental commitments under all non-cancelable leases	18,309,000
Future minimum commitments
2014	15,225,000
2015	941,000
2016	492,000
2017	304,000
2018	41,000
Total commitments	17,003,000
Purchase Obligations
Future minimum commitments
2014	14,775,000
2015	491,000
2016	42,000
2017	41,000
2018	41,000
Total commitments	15,390,000
Debt Interest Obligations
Future minimum commitments
2014	450,000
2015	450,000
2016	450,000
2017	263,000
Total commitments	$ 1,613,000

XML

Operations and Summary of Significant Accounting Policies (Details 8) (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Changes in gross carrying amount of finite-lived intangible assets
Gross carrying amount, balance at the beginning of the year	$ 69,693
Accumulated amortization, balance at the beginning of the year	(19,095)
Net carrying amount, balance at the beginning of the year	50,598
Amortization	(7,100)	(7,800)	(4,300)
Gross carrying amount, balance at the end of the year	67,737	69,693
Accumulated amortization, balance at the end of the year	(25,964)	(19,095)
Net carrying amount, balance at the end of the year	41,773	50,598
Goodwill	129,218	121,981	99,849
Estimated future amortization of intangible assets
2014	7,078
2015	6,162
2016	5,905
2017	3,953
2018	3,059
Thereafter	9,950
Total	36,107
North America
Changes in gross carrying amount of finite-lived intangible assets
Gross carrying amount, balance at the end of the year	34,520	37,992
Accumulated amortization, balance at the end of the year	(15,909)	(12,012)
Net carrying amount, balance at the end of the year	18,611	25,980
Goodwill	84,822	78,739	73,901
Europe
Changes in gross carrying amount of finite-lived intangible assets
Gross carrying amount, balance at the end of the year	33,217	31,701
Accumulated amortization, balance at the end of the year	(10,055)	(7,083)
Net carrying amount, balance at the end of the year	23,162	24,618
Goodwill	42,690	41,263	24,000
S&P Clever
Changes in gross carrying amount of finite-lived intangible assets
Goodwill	19,000
Patents
Changes in gross carrying amount of finite-lived intangible assets
Gross carrying amount, balance at the beginning of the year	6,684	6,681
Accumulated amortization, balance at the beginning of the year	(5,377)	(4,767)
Net carrying amount, balance at the beginning of the year	1,307	1,914
Amortization	(611)	(610)
Foreign exchange	5	3
Gross carrying amount, balance at the end of the year	6,689	6,684
Accumulated amortization, balance at the end of the year	(5,988)	(5,377)
Net carrying amount, balance at the end of the year	701	1,307
Unpatented Technology
Changes in gross carrying amount of finite-lived intangible assets
Gross carrying amount, balance at the beginning of the year	5,361	4,129
Accumulated amortization, balance at the beginning of the year	(2,017)	(1,395)
Net carrying amount, balance at the beginning of the year	3,344	2,734
Disposal, Gross carrying amount	(1,530)
Disposal, Accumulated amortization	158
Disposal, Net carrying amount	(1,372)
Amortization	(3,398)	(622)
Foreign exchange	799	32
Reclassifications	14,347	1,200
Gross carrying amount, balance at the end of the year	18,977	5,361
Accumulated amortization, balance at the end of the year	(5,257)	(2,017)
Net carrying amount, balance at the end of the year	13,720	3,344
Non-Compete Agreements, Trademarks and Other
Changes in gross carrying amount of finite-lived intangible assets
Gross carrying amount, balance at the beginning of the year	36,951	16,276
Accumulated amortization, balance at the beginning of the year	(3,002)	(5,361)
Net carrying amount, balance at the beginning of the year	33,949	10,915
Acquisition	4,130	32,355
Disposal, Gross carrying amount	(200)	(2,212)
Disposal, Accumulated amortization	74	1,628
Disposal, Net carrying amount	(126)	(584)
Amortization	(636)	(4,309)
Foreign exchange	(728)	(2)
Reclassifications	(26,588)	(4,426)
Removal of fully amortized asset, gross	(10)	(5,040)
Accumulated amortization of removal of fully amortized asset	10	5,040
Gross carrying amount, balance at the end of the year	13,555	36,951
Accumulated amortization, balance at the end of the year	(3,554)	(3,002)
Net carrying amount, balance at the end of the year	10,001	33,949
Customer Relationships
Changes in gross carrying amount of finite-lived intangible assets
Gross carrying amount, balance at the beginning of the year	20,697	18,940
Accumulated amortization, balance at the beginning of the year	(8,699)	(6,647)
Net carrying amount, balance at the beginning of the year	11,998	12,293
Amortization	(2,465)	(2,052)
Foreign exchange	229	57
Reclassifications	1,923	1,700
Gross carrying amount, balance at the end of the year	22,849	20,697
Accumulated amortization, balance at the end of the year	(11,164)	(8,699)
Net carrying amount, balance at the end of the year	$ 11,685	$ 11,998

XML

Debt (Tables)

12 Months Ended

Dec. 31, 2013

Debt

Schedule of interest costs incurred, capitalized, and expensed

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Interest costs incurred	$	1,019		$	909		$	661
Less: Interest capitalized	(118		)	(116		)	(88		)
Interest expense	$	901		$	793		$	573

XML

Income Taxes (Details) (USD $)	3 Months Ended								12 Months Ended
	Dec. 31, 2013	Sep. 30, 2013	Jun. 30, 2013	Mar. 31, 2013	Dec. 31, 2012	Sep. 30, 2012	Jun. 30, 2012	Mar. 31, 2012	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Current
Federal									$ 19,804,000	$ 13,163,000	$ 21,040,000
State									3,243,000	2,732,000	4,427,000
Foreign									3,926,000	3,920,000	4,582,000
Deferred
Federal									3,646,000	(544,000)	(574,000)
State									404,000	(98,000)	(358,000)
Foreign									(430,000)	830,000	(1,231,000)
Income tax expense (benefit)	4,289,000	10,870,000	11,177,000	4,256,000	(6,785,000)	9,069,000	11,347,000	6,372,000	30,593,000	20,003,000	27,886,000
Income and loss from continuing operations before income taxes
Domestic									74,912,000	65,705,000	68,961,000
Foreign									6,652,000	(3,784,000)	9,825,000
Income before taxes	11,957,000	30,876,000	29,679,000	9,051,000	(902,000)	22,045,000	27,206,000	13,573,000	81,564,000	61,921,000	78,786,000
Reconciliations between the statutory federal income tax rates and effective income tax rates
Federal tax rate (as a percent)									35.00%	35.00%	35.00%
State taxes, net of federal benefit (as a percent)									3.00%	2.90%	3.40%
Tax benefit of domestic manufacturing deduction (as a percent)									(2.20%)	(2.10%)	(2.50%)
Change in valuation allowance (as a percent)									1.30%	6.00%	(0.30%)
Difference between United States statutory and foreign local tax rates (as a percent)									0.10%	2.60%	0.30%
Change in uncertain tax position (as a percent)									(0.40%)	(0.30%)
Worthless stock deduction on Irish subsidiary										(15.40%)
Non-deductible goodwill write-off										1.10%
Non-deductible professional fee										1.30%
Other (as a percent)									0.70%	1.20%	(0.50%)
Effective income tax rate (as a percent)									37.50%	32.30%	35.40%
Additional disclosures
Tax benefit from worthless stock deduction										$ 9,900,000

XML

Selected Quarterly Financial Data (Unaudited)

12 Months Ended

Dec. 31, 2013

Selected Quarterly Financial Data (Unaudited)

Selected Quarterly Financial Data (Unaudited)

16.          Selected Quarterly Financial Data (Unaudited)

The following table sets forth selected quarterly financial data for each of the quarters in 2013 and 2012:

(in thousands, except per share amounts)

	2013										2012
	Fourth		Third			Second		First			Fourth			Third		Second			First
	Quarter		Quarter			Quarter		Quarter			Quarter			Quarter		Quarter			Quarter
Net sales	$	160,322	$	195,877		$	195,596	$	154,535		$	144,686		$	172,113	$	181,703		$	158,734
Cost of sales	90,331		105,724			106,176		89,561			89,482			96,390		98,557			89,329
Gross profit	69,991		90,153			89,420		64,974			55,204			75,723		83,146			69,405
Research and development and other engineering	9,825		9,226			9,484		8,308			8,763			8,916		9,043			9,198
Selling	21,448		20,630			21,652		21,371			21,109			20,941		19,881			20,432
General and administrative	25,411		28,781			28,595		26,290			23,799			23,843		27,087			26,244
Impairment of goodwill	—		—			—		—			2,346			—		—			—
Loss (gain) on sale of assets	1,404		631			11		(8		)	124			33		(13		)	23
Income (loss) from operations	11,903		30,885			29,678		9,013			(937		)	21,990		27,148			13,508
Interest income, net	54		(9		)	1		38			35			55		58			65
Income (loss) before income taxes	11,957		30,876			29,679		9,051			(902		)	22,045		27,206			13,573
Provision for (benefit from) income taxes	4,289		10,870			11,177		4,256			(6,785		)	9,069		11,347			6,372
Net income	$	7,668	$	20,006		$	18,502	$	4,795		$	5,883		$	12,976	$	15,859		$	7,201
Earnings per common share:
Basic	$	0.16	$	0.41		$	0.38	$	0.10		$	0.12		$	0.27	$	0.33		$	0.15
Diluted	0.16		0.41			0.38		0.10			0.12			0.27		0.33			0.15
Cash dividends declared per common share	$	0.125	$	0.125		$	0.125	$	—		$	0.25		$	0.125	$	0.125		$	0.125

Basic and diluted income per common share for each of the quarters presented above is based on the respective weighted average numbers of common and dilutive potential common shares outstanding for each quarter, and the sum of the quarters may not necessarily be equal to the full year basic and diluted net income per common share amounts.

XML

Inventories (Details) (USD $) In Thousands, unless otherwise specified	Dec. 31, 2013	Dec. 31, 2012
Inventories
Raw materials	$ 81,338	$ 95,959
In-process products	18,475	16,878
Finished products	97,915	91,287
Total inventories	$ 197,728	$ 204,124

XML

Operations and Summary of Significant Accounting Policies (Details 4) (CarbonWrap product line, USD $) In Millions, unless otherwise specified	1 Months Ended
	Dec. 31, 2013
CarbonWrap product line
Sale of Product Line
Sale proceeds	$ 3.8
Assets	2.0
Intangible assets	1.5
Goodwill	0.5
Severance costs	0.5
Pre-tax gain from discontinued operations	$ 1.4

XML

Segment Information (Tables)

12 Months Ended

Dec. 31, 2013

Segment Information

Schedule of performance of reportable segments

(in thousands)

	North				Asia/			Administrative
2013	America		Europe		Pacific			& All Other			Total
Net sales	$	572,789	$	117,799	$	14,793		$	948		$	706,329
Sales to other segments *	4,735		352		16,334			—			21,421
Income (loss) from operations	84,885		1,258		(2,202		)	(2,463		)	81,478
Depreciation and amortization	17,707		7,019		1,499			1,293			27,518
Impairment of long-lived asset	—		1,025		—			—			1,025
Significant non-cash charges	8,867		1,561		142			2,177			12,747
Provision for (benefit from) income taxes	26,372		2,906		(101		)	1,416			30,593
Capital expenditures and asset acquisitions, net of cash acquired	19,424		2,244		1,620			9			23,297
Total assets	627,196		201,384		31,560			93,473			953,613

	North					Asia/			Administrative
2012	America		Europe			Pacific			& All Other		Total
Net sales	$	522,895	$	122,549		$	10,843		$	949	$	657,236
Sales to other segments *	5,121		430			15,721			—		21,272
Income (loss) from operations	71,586		(8,095		)	(2,799		)	1,017		61,709
Depreciation and amortization	16,317		7,744			1,330			1,466		26,857
Impairment of goodwill	—		2,346			—			—		2,346
Impairment of long-lived asset	461		342			—			—		803
Significant non-cash charges	7,369		1,053			194			2,051		10,667
Provision for income taxes	15,037		3,544			323			1,099		20,003
Capital expenditures and asset acquisitions, net of cash acquired	23,014		63,156			916			—		87,086
Total assets	583,501		194,000			30,455			82,366		890,322

	North				Asia/			Administrative
2011	America		Europe		Pacific			& All Other			Total
Net sales	$	474,722	$	118,246	$	9,528		$	950		$	603,446
Sales to other segments *	4,805		575		11,359			—			16,739
Income (loss) from operations	75,350		1,296		(1,471		)	(1,118		)	74,057
Depreciation and amortization	13,194		4,849		1,211			1,497			20,751
Impairment of goodwill	—		1,282		—			—			1,282
Impairment of long-lived asset	1,094		—		—			—			1,094
Significant non-cash charges	4,464		966		129			1,278			6,837
Provision for (benefit from) income taxes	25,348		2,588		(805		)	755			27,886
Capital expenditures and asset acquisitions, net of cash acquired	72,291		5,062		544			19			77,916
Total assets	540,082		180,016		29,306			86,683			836,087

* Sales to other segments are eliminated on consolidation.

Schedule of net sales and long-lived assets by geographical segments

(in thousands)

	2013				2012				2011
	Net		Long-Lived		Net		Long-Lived		Net		Long-Lived
	Sales		Assets		Sales		Assets		Sales		Assets
United States	$	531,968	$	152,644	$	479,390	$	152,456	$	433,242	$	165,363
Canada	41,626		5,763		44,359		6,182		42,350		5,964
Denmark	14,993		1,907		15,096		2,252		17,158		2,607
United Kingdom	21,852		1,249		23,504		1,232		23,598		1,370
France	36,708		9,302		37,826		10,036		43,319		10,530
Germany	26,058		17,446		27,919		17,651		27,237		4,957
Switzerland	6,019		11,649		6,653		11,628		—		—
Poland	5,982		692		4,847		795		3,004		224
The Netherlands	4,306		63		3,336		92		—		—
Portugal	804		688		1,437		734		—		—
Ireland	31		—		791		2,757		2,720		3,075
China/Hong Kong	9,802		9,499		6,054		9,675		4,754		10,022
Australia	3,289		356		3,386		441		4,586		369
New Zealand	1,701		125		1,404		154		188		138
Other countries	1,190		739		1,234		577		1,290		560
	$	706,329	$	212,122	$	657,236	$	216,662	$	603,446	$	205,179

Schedule of distribution of the Company's net sales by product group

(in thousands)

	2013		2012		2011
Wood Construction	$	596,849	$	558,113	$	536,131
Concrete Construction	108,341		97,967		66,031
Other	1,139		1,156		1,284
Total	$	706,329	$	657,236	$	603,446

XML

Investments (Details) (Keymark Enterprises, LLC, USD $) In Millions, unless otherwise specified	12 Months Ended
	Dec. 31, 2011
Keymark Enterprises, LLC
Purchase of Keymark software assets
Investment in Keymark, carrying value	$ 1.0
Software assets acquired	11.5
Software assets acquired, net cash payments	6.2
Ownership interest given up in exchange for software assets acquired (as a percent)	46.10%
Gain on disposal of investment in Keymark	$ 4.3

XML

SCHEDULE II VALUATION AND QUALIFYING ACCOUNTS (Details) (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Allowance for doubtful accounts
Valuation and qualifying accounts
Balance at Beginning of Year	$ 1,287	$ 991	$ 1,344
Charged to Costs and Expenses	(48)	355	67
Deductions	294	59	420
Balance at End of Year	945	1,287	991
Allowance for sales discounts
Valuation and qualifying accounts
Balance at Beginning of Year	1,632	1,231	1,181
Charged to Costs and Expenses	(181)	401	50
Balance at End of Year	1,451	1,632	1,231
Allowance for deferred tax assets
Valuation and qualifying accounts
Balance at Beginning of Year	9,720	6,279	7,167
Charged to Costs and Expenses	1,458	3,600	1,082
Deductions	5,632	159	1,970
Balance at End of Year	$ 5,546	$ 9,720	$ 6,279

XML

Related Party Transactions (Details) (USD $)	12 Months Ended							1 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011	Dec. 31, 2012 Chief Executive Officer	Dec. 31, 2011 Chief Executive Officer	Dec. 31, 2013 Gerald Hagel, vice president and Susan Hagel, spouse Simpson Strong-Tie	Dec. 31, 2011 Keymark Enterprises, LLC	Jan. 31, 2013 Entities related to Keymark	Jul. 31, 2012 Entities related to Keymark	Jan. 31, 2010 Entities related to Keymark item	Dec. 31, 2009 Entities related to Keymark item
Related Party Transaction
Cost of use of airplanes		$ 500,000	$ 500,000	$ 20,000	$ 30,000
Lease agreement, extended period						5 years
Annual lease payment to lease the property from Mr. Hagel and his wife Susan Hagel, a former employee of Simpson Strong-Tie	6,900,000	6,900,000	7,300,000			300,000
Loans made to related parties										1,700,000	700,000
Number of related entities										2	2
Interest rate of loans (as a percent)										5.50%	5.50%
Loan repayments by related parties	700,000	1,698,000	552,000					700,000	1,700,000
Fees for software development							2,500,000
Software assets acquired							11,500,000
Software assets acquired, net cash payments							$ 6,200,000
Ownership interest given up in exchange for software assets acquired (as a percent)							46.10%

XML

Operations and Summary of Significant Accounting Policies (Details 9) (USD $)	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012
Indefinite-Lived Intangible Assets
Intangible assets	$ 5,666,000
Indefinite-Lived Intangibles
Reclassifications	5,358,000
Foreign exchange	308,000
Indefinite-Lived Intangibles, Balance at the end of the year	5,666,000
Increase in goodwill	1,592,000	22,826,000
Decrease in goodwill	480,000
Purchase price adjustment | Keymark
Indefinite-Lived Intangibles
Increase in goodwill		5,900,000
Purchase price adjustment | Keymark | Unpatented Technology
Indefinite-Lived Intangibles
Increase in intangible assets		1,200,000
Automatic Stamping and Automatic Stamping Auxiliary Services | Purchase price adjustment
Indefinite-Lived Intangibles
Increase in goodwill		1,700,000
Decrease in goodwill		500,000
Automatic Stamping and Automatic Stamping Auxiliary Services | Purchase price adjustment | Customer Relationships
Indefinite-Lived Intangibles
Increase in intangible assets		400,000
Fox Industries, Inc. | Purchase price adjustment | Customer Relationships
Indefinite-Lived Intangibles
Increase in intangible assets		1,300,000
S&P Clever | Purchase price adjustment
Indefinite-Lived Intangibles
Increase in intangible assets	12,800,000
S&P Clever | Purchase price adjustment | Customer Relationships
Indefinite-Lived Intangibles
Increase in intangible assets		1,900,000
CarbonWrap Solutions, L.L.C | Purchase price adjustment
Indefinite-Lived Intangibles
Increase in intangible assets	1,500,000
In-process research and development assets
Indefinite-Lived Intangible Assets
Number of indefinite-lived assets	2
Intangible assets	5,050,000
Indefinite-Lived Intangibles
Reclassifications	4,742,000
Foreign exchange	308,000
Indefinite-Lived Intangibles, Balance at the end of the year	5,050,000
IPR&D one
Indefinite-Lived Intangible Assets
Number of indefinite-lived assets	1
Intangible assets	3,400,000
Indefinite-Lived Intangibles
Indefinite-Lived Intangibles, Balance at the end of the year	3,400,000
IPR&D two
Indefinite-Lived Intangible Assets
Intangible assets	1,700,000
Indefinite-Lived Intangibles
Indefinite-Lived Intangibles, Balance at the end of the year	1,700,000
Trade Name
Indefinite-Lived Intangible Assets
Intangible assets	616,000
Indefinite-Lived Intangibles
Reclassifications	616,000
Indefinite-Lived Intangibles, Balance at the end of the year	$ 616,000

XML

Consolidated Statements of Cash Flows (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Cash flows from operating activities
Net income	$ 50,971	$ 41,918	$ 50,900
Adjustments to reconcile net income to net cash provided by operating activities:
Loss on sale of assets	2,038	166	191
Depreciation and amortization	27,518	26,857	20,751
Impairment of long-lived assets	1,025	803	1,094
Impairment of Goodwill		2,346	1,282
Deferred income taxes	3,620	189	(2,163)
Noncash compensation related to stock plans	12,747	10,667	6,837
Gain in equity method investment			(4,389)
Excess tax benefit of options exercised	(80)	(110)
Provision for (recovery of) doubtful accounts	(48)	355	67
Accrued interest earned from related party			(58)
Changes in operating assets and liabilities, net of effects of acquisitions and dispositions:
Trade accounts receivable	(6,651)	(2,678)	(6,982)
Inventories	8,458	(17,045)	(26,196)
Other current assets	27	3,970	(190)
Other noncurrent assets	237	(244)	1,376
Trade accounts payable	(2,708)	12,208	(10,126)
Accrued liabilities	2,653	(909)	2,899
Accrued profit sharing trust contributions	617	703	(1,102)
Accrued cash profit sharing and commissions	2,611	(54)	673
Other long-term liabilities	(1,024)	(1,433)	(1,112)
Accrued workers' compensation	(100)	(783)	790
Income taxes payable	4,595	(8,874)	545
Net cash provided by operating activities	106,506	68,052	35,087
Cash flows from investing activities
Capital expenditures	(16,804)	(21,961)	(26,063)
Asset acquisitions, net of cash acquired	(6,493)	(65,125)	(51,853)
Loan repayments by related parties	700	1,698	552
Proceeds from sale of assets and a business	5,262	7,642	3,081
Net cash used in investing activities	(17,335)	(77,746)	(74,283)
Cash flows from financing activities
Line of credit and other borrowings		2,183
Repayment of line of credit and other borrowings	(81)	(5,747)
Debt issuance costs		(1,415)
Contingent consideration of asset acquisitions	(520)	(354)
Repurchase of common stock	(9,825)		(53,208)
Issuance of Company's common stock	15,057	4,925	214
Excess tax benefit of options exercised	80	110
Dividends paid	(18,130)	(30,193)	(23,329)
Net cash used in financing activities	(13,419)	(30,491)	(76,323)
Effect of exchange rate changes on cash	(97)	1,921	(5,713)
Net increase (decrease) in cash and cash equivalents	75,655	(38,264)	(121,232)
Cash and cash equivalents at beginning of year	175,553	213,817	335,049
Cash and cash equivalents at end of year	251,208	175,553	213,817
Cash paid during the year for
Interest	30	350	279
Income taxes	23,624	31,391	30,789
Noncash activity during the year for
Capital expenditures	1,082	974	402
Asset acquisition	806	786	363
Stock-based compensation	318	418	204
Dividends declared but not paid	6,095	6,053	6,020
Equity method investment acquisition (Note 6)			708
Contribution in excess of pension benefit cost	$ 55	$ 57

XML

Stock-Based Compensation Plans (Details) (USD $)	12 Months Ended											0 Months Ended	12 Months Ended			0 Months Ended				0 Months Ended
	Dec. 31, 2013 plan	Dec. 31, 2012	Dec. 31, 2011	Dec. 31, 2013 1994 Plan	Dec. 31, 2013 1994 Plan Granted on 3 Feb 2011	Dec. 31, 2013 1995 Plan Granted on 15 Feb 2011	Dec. 31, 2013 Stock Bonus Plan	Dec. 31, 2012 Stock Bonus Plan	Dec. 31, 2011 Stock Bonus Plan	Dec. 31, 2013 Restricted Stock Units	Dec. 31, 2012 Restricted Stock Units	Feb. 03, 2014 Restricted Stock Units Subsequent event	Dec. 31, 2013 Non-Qualified Stock Options	Dec. 31, 2012 Non-Qualified Stock Options	Dec. 31, 2013 Unvested Stock Options	Feb. 06, 2013 Independent directors Restricted Stock Units Restrictions lapse (awards vest) on date of award	Feb. 06, 2013 Independent directors Restricted Stock Units Restrictions lapse (awards vest) on first, second and third anniversaries of the date of the award	Feb. 03, 2014 Independent directors Restricted Stock Units Subsequent event	Dec. 31, 2013 Restrictions on awards to certain officers item	Feb. 06, 2013 Restrictions on awards to certain officers Restricted Stock Units Restrictions lapse (awards vest) on the third anniversary of the date of the award	Feb. 06, 2013 Restrictions on awards to certain officers Restricted Stock Units Restrictions lapse (awards vest) on the fourth anniversary of the date of the award
Stock-Based Compensation Plans
Number of stock-based incentive plans	1
Number of stock option plans superseded	2
Stock-Based Compensation
Number of executive officers																			3
Restricted stock unit activity
Outstanding at the beginning of the period (in shares)										264,000
Awarded (in shares)										359,000		342,950						9,975
Vested (in shares)										(174,000)
Forfeited (in shares)										(1,000)
Outstanding at the end of the period (in shares)										448,000	264,000
Outstanding and expected to vest at the end of the period (in shares)										436,000
Weighted-Average Exercise Price
Outstanding at the beginning of the period (in dollars per share)										$ 33.23			$ 31.58
Awarded (in dollars per share)										$ 31.96								$ 32.60
Vested (in dollars per share)										$ 32.62
Forfeited (in dollars per share)										$ 32.47			$ 40.65
Outstanding at the end of the period (in dollars per share)										$ 32.48	$ 33.23		$ 29.35	$ 31.58
Outstanding and expected to vest at the end of the period (in dollars per share)										$ 32.45
Aggregate Intrinsic Value
Outstanding at the end of the period (in dollars)										$ 16,447,000			$ 7,539,000	$ 5,347,000
Outstanding and expected to vest at end of the period (in dollars)										16,021,000			7,404,000
Closing price per share (in dollars per share)										$ 36.73
Total intrinsic value of awards vested (in dollars)										5,700,000	3,100,000
Black-Scholes option pricing model assumptions for options granted
Number of Options Granted (in shares)	0	0			1,362,000	30,000
Risk Free Interest Rate (as a percent)					2.62%	2.92%
Dividend Yield (as a percent)					1.75%	1.76%
Expected Life					6 years 2 months 12 days	6 years 7 months 6 days
Volatility (as a percent)					39.00%	38.00%
Exercise price for options granted, low end of range (in dollars per share)					$ 29.66
Exercise price for options granted, high end of range (in dollars per share)					$ 32.63
Exercise Price (in dollars per share)						$ 29.58
Weighted Average Fair Value (in dollars per share)					$ 10.33	$ 10.49
Non-Qualified Stock Options activity
Outstanding at the beginning of the period (in shares)													1,907,000
Exercised (in shares)													(512,000)
Forfeited (in shares)													(374,000)
Outstanding at the end of the period (in shares)													1,021,000	1,907,000
Outstanding and expected to vest at the end of the period (in shares)													1,003,000
Exercisable at the end of the period (in shares)													573,000
Weighted-Average Exercise Price
Outstanding at the beginning of the period (in dollars per share)										$ 33.23			$ 31.58
Exercised (in dollars per share)													$ 29.39
Forfeited (in dollars per share)										$ 32.47			$ 40.65
Outstanding at the end of the period (in dollars per share)										$ 32.48	$ 33.23		$ 29.35	$ 31.58
Outstanding and expected to vest at end of the period (in dollars per share)													$ 29.35
Exercisable at end of the period (in dollars per share)													$ 29.14
Weighted-Average Remaining Contractual Life
Outstanding at the end of the period													4 years	3 years 9 months 18 days
Outstanding and expected to vest at end of the period													4 years
Exercisable at end of the period													3 years 10 months 24 days
Aggregate Intrinsic Value
Outstanding at the end of the period (in dollars)										16,447,000			7,539,000	5,347,000
Outstanding and expected to vest at end of the period (in dollars)										16,021,000			7,404,000
Exercisable at end of the period (in dollars)													4,352,000
Vesting rights percentage when restrictions lapse																25.00%	25.00%			75.00%	25.00%
Closing price of share (in dollars per share)													$ 36.73
Total intrinsic value of stock options exercised (in dollars)	2,600,000	1,100,000	100,000
Granted (in shares)	0	0			1,362,000	30,000
Number of Shares, Unvested Stock Options
Unvested at the beginning of the period (in shares)															826,000
Vested (in shares)															(377,000)
Forfeited (in shares)															(1,000)
Unvested at the end of the period (in shares)															448,000
Weighted-Average Grant-Date Fair Value, Unvested Stock Options
Unvested at the beginning of the period (in dollars per share)															$ 10.25
Vested (in dollars per share)															$ 10.17
Forfeited (in dollars per share)															$ 10.33
Unvested at the end of the period (in dollars per share)															$ 10.31
Unrecognized compensation cost and vesting period
Unrecognized compensation costs related to unvested stock-based compensation arrangements	18,100,000
Weighted-average period for recognition of unrecognized stock-based compensation expense	1 year 6 months
Other disclosures
Shares issued and committed to issue							11,000	9,000	12,000
Stock-based compensation expense recognized in operating expenses	$ 12,053,000	$ 10,205,000	$ 6,133,000				$ 700,000	$ 500,000	$ 700,000
Requisite service period for options to vest				4 years			10 years

XML

Operations and Summary of Significant Accounting Policies (Details 5) (USD $) In Thousands, except Per Share data, unless otherwise specified	3 Months Ended								12 Months Ended
	Dec. 31, 2013	Sep. 30, 2013	Jun. 30, 2013	Mar. 31, 2013	Dec. 31, 2012	Sep. 30, 2012	Jun. 30, 2012	Mar. 31, 2012	Dec. 31, 2013 item votepershare series rightpershare	Dec. 31, 2012	Dec. 31, 2011
Common Stock
Number of votes for each share of common stock held									1
Number of rights per common stock as a part of dividend distribution									1
Percentage acquisition of common stock triggering exercise terms of rights, minimum									15.00%
Ownership interest held by any stockholder at date of rights distribution to which additional exercise terms for the Rights distributed apply (as a percent)									25.00%
Subsequent increase in ownership interest held by any stockholder after rights distribution to which additional exercise terms for the Rights distributed apply (as a percent)									40.00%
Redemption price per right (in cents per right)									$ 0.01
Preferred Stock
Number of series by which the Board may issue authorized and unissued preferred stock, minimum									1
Reconciliation of basic earnings per share ("EPS") to diluted EPS
Net income available to common stockholders	$ 7,668	$ 20,006	$ 18,502	$ 4,795	$ 5,883	$ 12,976	$ 15,859	$ 7,201	$ 50,971	$ 41,918	$ 50,900
Basic weighted-average shares outstanding									48,521	48,339	48,974
Dilutive effect of potential common stock equivalents - stock options (in shares)									152	73	49
Diluted weighted-average shares outstanding									48,673	48,412	49,023
Net earnings per share:
Basic (in dollars per share)	$ 0.16	$ 0.41	$ 0.38	$ 0.10	$ 0.12	$ 0.27	$ 0.33	$ 0.15	$ 1.05	$ 0.87	$ 1.04
Diluted (in dollars per share)	$ 0.16	$ 0.41	$ 0.38	$ 0.10	$ 0.12	$ 0.27	$ 0.33	$ 0.15	$ 1.05	$ 0.87	$ 1.04
Potentially dilutive securities excluded from earnings per diluted share because their effect is anti-dilutive (in shares)										1,700	1,363
Comprehensive Income
Translation adjustments, net of tax	18,283				12,342				18,283	12,342
Unamortized pension adjustments, net of tax	(197)				(243)				(197)	(243)
Total accumulated other comprehensive income	18,086				12,099				18,086	12,099
Translation adjustments, tax									854	883
Unamortized pension adjustments, tax benefit									$ 43	$ 46
Concentration of Credit Risk
Number of banks where demand deposit or money market accounts are held by the company									11

XML

Trade Accounts Receivable, net (Tables)

12 Months Ended

Dec. 31, 2013

Trade Accounts Receivable, net

Schedule of trade accounts receivable, net

(in thousands)

	December 31,
	2013			2012
Trade accounts receivable	$	92,413		$	85,732
Allowance for doubtful accounts	(945		)	(1,288		)
Allowance for sales discounts	(1,451		)	(1,632		)
	$	90,017		$	82,812

XML

Operations and Summary of Significant Accounting Policies (Tables)

12 Months Ended

Dec. 31, 2013

Operations and Summary of Significant Accounting Policies

Summary of financial instruments

(in thousands)

At December 31,
2013		2012
$	117,571	$	76,130

Schedule of estimated useful lives over which depreciation of software, machinery and equipment is provided for using accelerated methods

Software	3 to 5 years
Machinery and equipment	3 to 10 years

Reconciliation of basic earnings per share ("EPS") to diluted EPS

(in thousands, except per-share amounts)

	Year Ended December 31,
	2013		2012		2011
Net income available to common stockholders	$	50,971	$	41,918	$	50,900
Basic weighted average shares outstanding	48,521		48,339		48,974
Dilutive effect of potential common stock equivalents — stock options	152		73		49
Diluted weighted average shares outstanding	48,673		48,412		49,023
Net earnings per share:
Basic	$	1.05	$	0.87	$	1.04
Diluted	$	1.05	$	0.87	$	1.04
Potentially dilutive securities excluded from earnings per diluted share because their effect is anti-dilutive	—		1,700		1,363

Schedule of components of accumulated other comprehensive income

(in thousands)

	December 31,
	2013			2012
Translation adjustments, net of tax of $854 and $883 as of 2013 and 2012, respectively	$	18,283		$	12,342
Unamortized pension adjustments, net of tax of $43 and $46 as of 2013 and 2012, respectively	(197		)	(243		)
Total accumulated other comprehensive income	$	18,086		$	12,099

Schedule of Company's stock-based compensation activity

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Stock-based compensation expense recognized in operating expenses	$	12,053		$	10,205		$	6,133
Tax benefit of stock-based compensation expense in provision for income taxes	4,225			3,610			2,261
Stock-based compensation expense, net of tax	$	7,828		$	6,595		$	3,872
Fair value of shares vested	$	12,090		$	10,195		$	6,194
Proceeds to the Company from the exercise of stock-based compensation	$	15,057		$	4,925		$	214
Tax benefit from exercise of stock-based compensation, including shortfall tax benefits	$	(2,645	)	$	(233	)	$	(1,554	)

(in thousands)

	At December 31,
	2013		2012		2011
Stock-based compensation cost capitalized in inventory	$	374	$	335	$	345

Schedule of margin by which the reporting units passed the annual goodwill impairment test

							Pre-Tax
	Step 1		Discount				Operating
	Pass		Rate (1)		CAGR (2)		Margin (3)
	Margin		Increases		Decreases		Decreases
S&P Clever	9	%	7	%	6	%	10	%
France	10	%	13	%	19	%	15	%
Australia	4	%	2	%	2	%	6	%

(1) Hypothetical percentage increases noted in the discount rates, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values, and thus it would not result in the reporting unit failing Step 1 of the goodwill impairment test.

(2) Hypothetical percentage decreases noted in the CAGR, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values.

(3) Hypothetical annual average percentage decreases noted in average annual pre-tax operating margins, holding all other assumptions constant, would not have decreased the fair value of the reporting units below their carrying values.

Schedule of changes in the carrying amount of goodwill, by segment

(in thousands)

	North						Asia
	America			Europe			Pacific			Total
Balance as of January 1, 2012:
Goodwill	$	84,567		$	34,538		$	1,948		$	121,053
Accumulated impairment losses	(10,666		)	(10,538		)	—			(21,204		)
	73,901			24,000			1,948			99,849
Goodwill acquired	3,581			19,245			—			22,826
Foreign exchange	101			364			31			496
Impairment	—			(2,346		)	—			(2,346		)
Reclassifications (1)	1,156			—			—			1,156
Balance as of December 31, 2012:
Goodwill	89,405			54,147			1,979			145,531
Accumulated impairment losses	(10,666		)	(12,884		)	—			(23,550		)
	78,739			41,263			1,979			121,981
Goodwill acquired	918			674			—			1,592
Goodwill disposed	(480		)	—			—			(480		)
Foreign exchange	(248		)	1,393			(273		)	872
Impairment	—			—			—			—
Reclassifications (2)	5,893			(640		)	—			5,253
Balance as of December 31, 2013:
Goodwill	95,488			55,574			1,706			152,768
Accumulated impairment losses	(10,666		)	(12,884		)	—			(23,550		)
	$	84,822		$	42,690		$	1,706		$	129,218

(1)(2) See footnotes following table entitled Indefinite-Lived Intangibles, below.

Schedule of changes in the carrying amounts of finite-lived intangible assets subject to amortization

(in thousands)

	Gross					Net
	Carrying		Accumulated			Carrying
Patents	Amount		Amortization			Amount
Balance at January 1, 2012	$	6,681	$	(4,767	)	$	1,914
Amortization	—		(610		)	(610		)
Foreign exchange	3		—			3
Balance at December 31, 2012	6,684		(5,377		)	1,307
Amortization	—		(611		)	(611		)
Foreign exchange	5		—			5
Balance at December 31, 2013	$	6,689	$	(5,988	)	$	701

	Gross						Net
	Carrying			Accumulated			Carrying
Unpatented Technology	Amount			Amortization			Amount
Balance at January 1, 2012	$	4,129		$	(1,395	)	$	2,734
Amortization	—			(622		)	(622		)
Foreign exchange	32			—			32
Reclassifications (3)	1,200			—			1,200
Balance at December 31, 2012	5,361			(2,017		)	3,344
Disposals	(1,530		)	158			(1,372		)
Amortization	—			(3,398		)	(3,398		)
Foreign exchange	799			—			799
Reclassifications (4)	14,347			—			14,347
Balance at December 31, 2013	$	18,977		$	(5,257	)	$	13,720

	Gross						Net
Non-Compete Agreements,	Carrying			Accumulated			Carrying
Trademarks and Other	Amount			Amortization			Amount
Balance at January 1, 2012	$	16,276		(5,361		)	10,915
Acquisition	32,355			—			32,355
Disposal	(2,212		)	1,628			(584		)
Amortization	—			(4,309		)	(4,309		)
Foreign exchange	(2		)	—			(2		)
Reclassifications (1)(3)(5)	(4,426		)	—			(4,426		)
Removal of fully amortized asset	(5,040		)	5,040			—
Balance at December 31, 2012	36,951			(3,002		)	33,949
Acquisition	4,130			—			4,130
Disposal	(200		)	74			(126		)
Amortization	—			(636		)	(636		)
Foreign exchange	(728		)	—			(728		)
Reclassifications (2)(4)(6)(7)	(26,588		)	—			(26,588		)
Removal of fully amortized asset	(10		)	10			—
Balance at December 31, 2013	$	13,555		$	(3,554	)	$	10,001

	Gross					Net
	Carrying		Accumulated			Carrying
Customer Relationships	Amount		Amortization			Amount
Balance at January 1, 2012	$	18,940	(6,647		)	12,293
Amortization	—		(2,052		)	(2,052		)
Foreign exchange	57		—			57
Reclassifications (5)	1,700		—			1,700
Balance at December 31, 2012	20,697		(8,699		)	11,998
Amortization	—		(2,465		)	(2,465		)
Foreign exchange	229		—			229
Reclassifications (6)	1,923		—			1,923
Balance at December 31, 2013	$	22,849	$	(11,164	)	$	11,685

(1)(2)(3)(4)(5)(6)(7) See footnotes following table entitled Indefinite-Lived Intangibles, below.

Schedule of estimated future amortization of intangible assets

At December 31, 2013, estimated future amortization of intangible assets was as follows:

(in thousands)

2014	$	7,078
2015	6,162
2016	5,905
2017	3,953
2018	3,059
Thereafter	9,950
	$	36,107

Schedule of changes in the carrying amounts of indefinite-lived trade name and IPR&D assets not subject to amortization

					Net
					Carrying
Indefinite-Lived Intangibles	Trade Name		IPR&D		Amount
Balance at December 31, 2012	$	—	$	—	$	—
Reclassifications (7)	616		4,742		5,358
Foreign exchange	—		308		308
Balance at December 31, 2013	$	616	$	5,050	$	5,666

(1) Reclassifications in 2012 related to finalizing accounting for acquisitions, including a $1.7 million increase to goodwill with a corresponding decrease in non-compete agreements, trademarks and other related to the Automatic Stamping acquisition, partly offset by $0.5 million decrease to goodwill with a corresponding increase in other noncurrent assets non-compete agreements, trademarks and other related to the Fox Industries acquisition.

(2) Revisions related to the Keymark acquisition included a $5.9 million increase in goodwill with a corresponding decrease in non-compete agreements, trademarks and other.

(3) Reclassifications in 2012 related to finalizing accounting for acquisitions, including a $1.2 million increase to unpatented technology with a corresponding decrease in non-compete agreements, trademarks and other related to the Keymark acquisition.

(4) Reclassifications in 2013 related to finalizing accounting for acquisitions, including increases of $12.8 million and $1.5 million related to the S&P Clever and CarbonWrap acquisitions, respectively, with a corresponding decrease in non-compete agreements, trademarks and other.

(5) Reclassifications in 2012 related to finalizing accounting for acquisitions, including increases of $1.3 million and $0.4 million to customer relations related to the Fox Industries and Automatic Stamping acquisitions, respectively, with a corresponding decrease in non-compete agreements, trademarks and other.

(6) Reclassifications in 2013 related to finalizing accounting for acquisitions, including a $1.9 million increase to customer relations related to the S&P Clever acquisition with a corresponding decrease in non-compete agreements, trademarks and other.

(7) Reclassifications in 2013 related to finalizing accounting for the S&P Clever acquisition, including increases to IPR&D indefinite-lived assets as well as the reclassification of the Quik-Drive trade name from other non-current assets.

Schedule of amortizable and indefinite-lived assets, net, by segment

	At December 31, 2012
	Gross					Net
	Carrying		Accumulated			Carrying
Total Intangible Assets	Amount		Amortization			Amount
North America	$	37,992	$	(12,012	)	$	25,980
Europe	31,701		(7,083		)	24,618
Total	$	69,693	$	(19,095	)	$	50,598

	At December 31, 2013
	Gross					Net
	Carrying		Accumulated			Carrying
Total Intangible Assets	Amount		Amortization			Amount
North America	$	34,520	$	(15,909	)	$	18,611
Europe	33,217		(10,055		)	23,162
Total	$	67,737	$	(25,964	)	$	41,773

XML

Commitments and Contingencies (Details 2)	12 Months Ended	1 Months Ended
	Dec. 31, 2013 lawsuit	Feb. 29, 2012 Nishimura case lawsuit	Jul. 20, 2011 Nishimura case lawsuit	Dec. 31, 2013 Simpson Strong-Tie San Bernardino County agreement	Dec. 31, 2013 Simpson Strong-Tie San Bernardino County Tool and die craftsmen and maintenance workers agreement	Dec. 31, 2013 Simpson Strong-Tie Stockton agreement
Commitments and Contingencies
Percentage of employees represented by labor unions	14.00%
Collective bargaining arrangements
Collective bargaining agreements, number				2	1	2
Litigation
Number of lawsuits filed against the entity	4		5
Number of lawsuits dismissed		3

XML

Operations and Summary of Significant Accounting Policies (Details 6) (USD $) In Thousands, except Share data in Millions, unless otherwise specified	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Stock-based compensation activity, including both continuing and discontinued operations
Stock-based compensation expense recognized in operating expenses	$ 12,053	$ 10,205	$ 6,133
Tax benefit of stock-based compensation expense in provision for income taxes	4,225	3,610	2,261
Stock-based compensation expense, net of tax	7,828	6,595	3,872
Fair value of shares vested	12,090	10,195	6,194
Proceeds to the Company from the exercise of stock-based compensation	15,057	4,925	214
Tax benefit from exercise of stock-based compensation, including shortfall tax benefits	(2,645)	(233)	(1,554)
Stock-based compensation cost capitalized in inventory	$ 374	$ 335	$ 345
1994 Plan
Stock-Based Compensation
Requisite service period for options to vest	4 years
Expiration period for options granted	7 years
Age after which vesting of options granted accelerates if the grantee ceases to be employed by the entity	60 years
2011 Plan
Stock-Based Compensation
Maximum common stock shares that may be issued under plan	16.3

XML

Inventories (Tables)

12 Months Ended

Dec. 31, 2013

Inventories

Schedule of components of inventories

(in thousands)

	December 31,
	2013		2012
Raw materials	$	81,338	$	95,959
In-process products	18,475		16,878
Finished products	97,915		91,287
	$	197,728	$	204,124

XML

Property, Plant and Equipment, net (Tables)

12 Months Ended

Dec. 31, 2013

Property, Plant and Equipment, net

Schedule of property, plant and equipment

(in thousands)

	December 31,
	2013			2012
Land	$	29,347		$	32,068
Buildings and site improvements	178,391			174,187
Leasehold improvements	5,213			4,747
Machinery and equipment	225,831			214,222
	438,782			425,224
Less accumulated depreciation and amortization	(235,535		)	(217,868		)
	203,247			207,356
Capital projects in progress	6,286			6,096
	$	209,533		$	213,452

XML

Consolidated Statements of Stockholders' Equity (Parenthetical) (USD $)	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Consolidated Statements of Stockholders' Equity
Cash dividends declared on common stock, per share (in dollars per share)	$ 0.375	$ 0.625	$ 0.50
Common stock issued (in dollars per share)	$ 33.81	$ 33.71	$ 30.91

XML

Accrued Liabilities (Tables)

12 Months Ended

Dec. 31, 2013

Accrued Liabilities

Schedule of accrued liabilities

(in thousands)

	December 31,
	2013		2012
Sales incentive and advertising accruals	$	22,195	$	17,076
Labor related liabilities	9,129		8,309
Dividend payable	6,095		6,053
Vacation liability	6,584		5,818
Other	7,742		7,667
	$	51,745	$	44,923

XML

Operations and Summary of Significant Accounting Policies (Details 2) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011	Jan. 31, 2012 S&P Clever
Acquisitions
In-process research and development assets				$ 4.8
Product and Software Research and Development Costs
Product Research and Development Costs	10.7	11.5	6.1
Selling Costs
Advertising expenses	$ 7.0	$ 7.2	$ 6.3

XML

Accrued Liabilities (Details) (USD $) In Thousands, unless otherwise specified	Dec. 31, 2013	Dec. 31, 2012
Accrued Liabilities
Sales incentive and advertising accruals	$ 22,195	$ 17,076
Labor related liabilities	9,129	8,309
Dividend payable	6,095	6,053
Vacation liability	6,584	5,818
Other	7,742	7,667
Accrued liabilities	$ 51,745	$ 44,923

XML

Consolidated Balance Sheets (USD $) In Thousands, unless otherwise specified	Dec. 31, 2013	Dec. 31, 2012
Current assets
Cash and cash equivalents	$ 251,208	$ 175,553
Trade accounts receivable, net	90,017	82,812
Inventories	197,728	204,124
Deferred income taxes	12,699	11,473
Assets held for sale		593
Other current assets	16,454	23,499
Total current assets	568,106	498,054
Property, plant and equipment, net	209,533	213,452
Goodwill	129,218	121,981
Intangible assets	41,773	50,598
Other noncurrent assets	4,983	6,237
Total assets	953,613	890,322
Current liabilities
Line of credit and notes payable	103	178
Trade accounts payable	34,933	37,117
Accrued liabilities	51,745	44,923
Accrued profit sharing trust contributions	5,784	5,191
Accrued cash profit sharing and commissions	6,049	3,414
Accrued workers' compensation	4,591	4,692
Total current liabilities	103,205	95,515
Long-term liabilities	9,129	5,239
Total liabilities	112,334	100,754
Commitments and contingencies (Note 9)
Stockholders' equity
Preferred stock, par value $0.01; authorized shares, 5,000; issued and outstanding shares, none
Common stock, par value $0.01; authorized shares, 160,000; issued and outstanding shares, 48,712 and 48,422 at December 31, 2013 and 2012, respectively	486	483
Additional paid-in capital	207,418	184,677
Retained earnings	615,289	592,309
Accumulated other comprehensive income	18,086	12,099
Total stockholders' equity	841,279	789,568
Total liabilities and stockholders' equity	$ 953,613	$ 890,322

XML

Operations and Summary of Significant Accounting Policies (Details 7) (USD $) In Thousands, unless otherwise specified	3 Months Ended	12 Months Ended
	Dec. 31, 2012	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Goodwill Impairment Testing
Goodwill	$ 121,981	$ 129,218	$ 121,981	$ 99,849
Balance at the beginning of the year
Goodwill	145,531	152,768	145,531	121,053
Accumulated impairment losses	(23,550)	(23,550)	(23,550)	(21,204)
Goodwill at the beginning of the period, net		121,981	99,849
Goodwill acquired		1,592	22,826
Goodwill disposed		(480)
Foreign exchange		872	496
Impairment	(2,346)		(2,346)	(1,282)
Reclassifications		5,253	1,156
Balance at the end of the year
Goodwill	145,531	152,768	145,531	121,053
Accumulated impairment losses	(23,550)	(23,550)	(23,550)	(21,204)
Goodwill at the end of the period, net	121,981	129,218	121,981	99,849
Maximum
Goodwill Impairment Testing
Step 1 pass margin percentage criteria based on which sensitivity assessment of key assumption is done		10.00%
Keymark | Purchase price adjustment
Balance at the beginning of the year
Goodwill acquired			5,900
North America
Goodwill Impairment Testing
Goodwill	78,739	84,822	78,739
Balance at the beginning of the year
Goodwill	89,405	95,488	89,405	84,567
Accumulated impairment losses	(10,666)	(10,666)	(10,666)	(10,666)
Goodwill at the beginning of the period, net		78,739	73,901
Goodwill acquired		918	3,581
Goodwill disposed		(480)
Foreign exchange		(248)	101
Reclassifications		5,893	1,156
Balance at the end of the year
Goodwill	89,405	95,488	89,405	84,567
Accumulated impairment losses	(10,666)	(10,666)	(10,666)	(10,666)
Goodwill at the end of the period, net	78,739	84,822	78,739
Europe
Goodwill Impairment Testing
Goodwill	41,263	42,690	41,263	24,000
Balance at the beginning of the year
Goodwill	54,147	55,574	54,147	34,538
Accumulated impairment losses	(12,884)	(12,884)	(12,884)	(10,538)
Goodwill at the beginning of the period, net		41,263	24,000
Goodwill acquired		674	19,245
Foreign exchange		1,393	364
Impairment			(2,346)	(1,282)
Reclassifications		(640)
Balance at the end of the year
Goodwill	54,147	55,574	54,147	34,538
Accumulated impairment losses	(12,884)	(12,884)	(12,884)	(10,538)
Goodwill at the end of the period, net	41,263	42,690	41,263	24,000
Asia/Pacific
Goodwill Impairment Testing
Goodwill	1,979	1,706	1,979
Balance at the beginning of the year
Goodwill	1,979	1,706	1,979	1,948
Goodwill at the beginning of the period, net		1,979	1,948
Foreign exchange		(273)	31
Balance at the end of the year
Goodwill	1,979	1,706	1,979	1,948
Goodwill at the end of the period, net	1,979	1,706	1,979
Australia
Goodwill Impairment Testing
Marginal percentage by which the company passed annual impairment test		4.00%
Goodwill		1,700
Number of locations into which the activities will be consolidated		3
Margin by which the reporting units passed the annual goodwill impairment test
Step 1 Pass Margin (as a percent)		4.00%
Discount Rate Increases (as a percent)		2.00%
CAGR Decreases (as a percent)		2.00%
Pre-Tax Operating Margin Decreases (as a percent)		6.00%
Balance at the end of the year
Goodwill at the end of the period, net		1,700
United States
Goodwill Impairment Testing
Number of locations into which the activities will be consolidated		4
S&P Clever
Goodwill Impairment Testing
Marginal percentage by which the company passed annual impairment test		9.00%
Goodwill		19,000
Number of locations into which the activities will be consolidated		7
Margin by which the reporting units passed the annual goodwill impairment test
Step 1 Pass Margin (as a percent)		9.00%
Discount Rate Increases (as a percent)		7.00%
CAGR Decreases (as a percent)		6.00%
Pre-Tax Operating Margin Decreases (as a percent)		10.00%
Balance at the end of the year
Goodwill at the end of the period, net		19,000
France
Goodwill Impairment Testing
Marginal percentage by which the company passed annual impairment test		10.00%
Goodwill		14,900
Margin by which the reporting units passed the annual goodwill impairment test
Step 1 Pass Margin (as a percent)		10.00%
Discount Rate Increases (as a percent)		13.00%
CAGR Decreases (as a percent)		19.00%
Pre-Tax Operating Margin Decreases (as a percent)		15.00%
Balance at the end of the year
Goodwill at the end of the period, net		$ 14,900

XML

Consolidated Statements of Comprehensive Income (Parenthetical) (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Consolidated Statements of Comprehensive Income
Translation adjustment, tax benefit (expense)	$ 29	$ 33	$ (1)
Unamortized pension adjustments, tax benefit	$ (3)	$ 46

XML

Income Taxes (Details 3) (USD $)	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Reconciliation of unrecognized tax benefits
Balance at the beginning of the period	$ 3,843,000	$ 4,683,000	$ 5,862,000
Additions based on tax positions related to prior years	297,000	527,000	18,000
Reductions based on tax positions related to prior years	(494,000)	(1,163,000)	(681,000)
Additions for tax positions of the current year	837,000	933,000	570,000
Settlements	(435,000)	(486,000)	(362,000)
Lapse of statute of limitations	(592,000)	(651,000)	(724,000)
Balance at the end of the period	3,456,000	3,843,000	4,683,000
Portion of uncertain tax benefit, if recognized, would reduce effective tax rate	700,000	900,000	1,100,000
Amount of decrease in unrecognized tax benefits that is reasonably possible within the next 12 months	1,800,000
Decrease in accrued interest as a result of the reversal of accrued interest associated with the lapse of statutes of limitations	300,000	400,000	0
Accrued interest	$ 400,000	$ 700,000	$ 1,100,000

XML

Income Taxes (Tables)

12 Months Ended

Dec. 31, 2013

Income Taxes

Schedule of provision for income taxes from operations

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Current
Federal	$	19,804		$	13,163		$	21,040
State	3,243			2,732			4,427
Foreign	3,926			3,920			4,582
Deferred
Federal	3,646			(544		)	(574		)
State	404			(98		)	(358		)
Foreign	(430		)	830			(1,231		)
	$	30,593		$	20,003		$	27,886

Schedule of income and loss from operations before income taxes

(in thousands)

	Years Ended December 31,
	2013		2012			2011
Domestic	$	74,912	$	65,705		$	68,961
Foreign	6,652		(3,784		)	9,825
	$	81,564	$	61,921		$	78,786

Schedule of effective income tax rates reconciliations

(in thousands)

	Years Ended December 31,
	2013		2012		2011
Federal tax rate	35.0	%	35.0	%	35.0	%
State taxes, net of federal benefit	3.0	%	2.9	%	3.4	%
Tax benefit of domestic manufacturing deduction	(2.2	)%	(2.1	)%	(2.5	)%
Change in valuation allowance	1.3	%	6.0	%	(0.3	)%
Difference between United States statutory and foreign local tax rates	0.1	%	2.6	%	0.3	%
Change in uncertain tax position	(0.4	)%	(0.3	)%	—
Worthless stock deduction on Irish subsidiary	—		(15.4	)%	—
Non-deductible goodwill write-off	—		1.1	%	—
Non-deductible professional fee	—		1.3	%	—
Other	0.7	%	1.2	%	(0.5	)%
Effective income tax rate	37.5	%	32.3	%	35.4	%

Schedule of deferred tax assets and liabilities

(in thousands)

	December 31,
	2013			2012			2011
Current deferred tax assets
State tax	$	1,415		$	1,133		$	1,586
Workers’ compensation	1,780			1,814			2,123
Health claims	601			516			549
Vacation liability	1,219			1,037			865
Allowance for doubtful accounts	181			332			291
Inventories	6,691			5,713			4,796
Sales incentive and advertising allowances	516			580			408
Intangible rights write-off	—			—			194
Acquisition expenses	—			—			477
Unrealized foreign exchange gain or loss	124			39			57
Other, net	172			309			428
	$	12,699		$	11,473		$	11,774
Long-term deferred tax assets (liabilities)
Depreciation	$	(2,671	)	$	(2,434	)	$	(3,067	)
Goodwill and other intangibles amortization	(9,781		)	(4,086		)	(314		)
Deferred compensation related to stock options	6,104			7,296			5,485
Uncertain tax positions’ unrecognized tax benefits	1,532			1,140			1,115
Non-United States tax loss carry forward	5,472			8,064			5,912
Tax effect on cumulative translation adjustment	(729		)	(763		)	(812		)
Other	940			526			811
	867			9,743			9,130
Less valuation allowances	(5,546		)	(9,719		)	(6,279		)
	$	(4,679	)	$	24		$	2,851

Schedule of reconciliation of unrecognized tax benefits, including foreign translation amount

(in thousands)

	2013			2012			2011
Balance at January 1	$	3,843		$	4,683		$	5,862
Additions based on tax positions related to prior years	297			527			18
Reductions based on tax positions related to prior years	(494		)	(1,163		)	(681		)
Additions for tax positions of the current year	837			933			570
Settlements	(435		)	(486		)	(362		)
Lapse of statute of limitations	(592		)	(651		)	(724		)
Balance at December 31	$	3,456		$	3,843		$	4,683

XML

Subsequent Events (Details) (USD $) In Millions, except Per Share data, unless otherwise specified	3 Months Ended							12 Months Ended			0 Months Ended
	Dec. 31, 2013	Sep. 30, 2013	Jun. 30, 2013	Dec. 31, 2012	Sep. 30, 2012	Jun. 30, 2012	Mar. 31, 2012	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011	Feb. 03, 2014 Subsequent event
Subsequent Events
Cash dividends declared per common share (in dollars per share)	$ 0.125	$ 0.125	$ 0.125	$ 0.25	$ 0.125	$ 0.125	$ 0.125	$ 0.375	$ 0.625	$ 0.50	$ 0.125
Common stock repurchase, authorized amount											$ 50.0

XML

Stock-Based Compensation Plans

12 Months Ended

Dec. 31, 2013

Stock-Based Compensation Plans

Stock-Based Compensation Plans

13. Stock-Based Compensation Plans

The Company has one stock-based incentive plan, which incorporates and supersedes its two previous plans (see Note 1 — Accounting for Stock-Based Compensation). Participants are granted stock-based awards only if the applicable Company-wide or profit-center operating goals, or both, or strategic goals, established by the Compensation and Leadership Development Committee of the Board of Directors at the beginning of the year, are met.

The fair value of each restricted stock unit award is estimated on the date of the award based on the closing market price of the underlying stock on the day preceding the date of the award. On February 3, 2014, 342,950 restricted stock units were awarded, including 9,975 awarded to the Company’s independent directors, at an estimated value of $32.60 per share, the closing price on January 31, 2014. The restrictions on these awards generally lapse one quarter on each of the date of the award and the first, second and third anniversaries of the date of the award. Restrictions on awards to three executive officers of the Company lapse three quarters on the third anniversary of the date of the award and one quarter on the fourth anniversary of the date of the award.

The following table summarizes the Company’s unvested restricted stock unit activity for the year ended December 31, 2013:

					Aggregate
			Weighted-		Intrinsic
	Shares		Average		Value *
Unvested Restricted Stock Units (RSUs)	(in thousands)		Price		(in thousands)
Outstanding at January 1, 2013	264		$	33.23
Awarded	359		31.96
Vested	(174	)	32.62
Forfeited	(1	)	32.47
Outstanding at December 31, 2013	448		$	32.48	$	16,447
Outstanding and expected to vest at December 31, 2013	436		$	32.45	$	16,021

*  The intrinsic value is calculated using the closing price per share of $36.73 as reported by the New York Stock Exchange on December 31, 2013.

The total intrinsic value of restricted stock units vested during the years ended December 31, 2013 and 2012, was $5.7 million and $3.1 million, respectively, based on the market value on the award date.

The fair value of each stock option award was estimated on the date of grant using the Black-Scholes option pricing model. Expected volatility is based on historical volatilities of the Company’s common stock measured monthly over a term that is equivalent to the expected life of the option. The expected terms of options are estimated based on the Company’s prior exercise experience and future expectations of the exercise and termination behavior of the grantees. The risk-free rate is based on the yield of United States Treasury zero-coupon bonds with maturities comparable to the expected life in effect at the time of grant. The dividend yield is based on the expected dividend rate on the grant date.

The assumptions used in the Black-Scholes option pricing model for options granted in 2011 were as follows:

Number		Risk-
of Options		Free
Granted	Grant	Interest		Dividend		Expected				Fair
(in thousands)	Date	Rate		Yield		Life	Volatility		Exercise Price	Value
1994 Plan
1,362	02/03/11	2.62	%	1.75	%	6.2 years	39.0	%	$29.66 to $32.63	$	10.33
1995 Plan
30	02/15/11	2.92	%	1.76	%	6.6 years	38.0	%	$29.58	$	10.49

No stock options were granted under the 2011 Plan in 2012 or 2013.

The following table summarizes the Company’s stock option activity for the year ended December 31, 2013:

					Weighted-
			Weighted-		Average	Aggregate
			Average		Remaining	Intrinsic
	Shares		Exercise		Contractual	Value*
Non-Qualified Stock Options	(in thousands)		Price		Life	(in thousands)
Outstanding at January 1, 2013	1,907		$	31.58	3.8	$	5,347
Exercised	(512	)	$	29.39
Forfeited	(374	)	$	40.65
Outstanding at December 31, 2013	1,021		$	29.35	4.0	$	7,539
Outstanding and expected to vest at December 31, 2013	1,003		$	29.35	4.0	$	7,404
Exercisable at December 31, 2013	573		$	29.14	3.9	$	4,352

* The intrinsic value represents the amount by which the fair market value of the underlying common stock exceeds the exercise price of the option, using the closing price per share of $36.73 as reported by the New York Stock Exchange on December 31, 2013.

The total intrinsic value of stock options exercised during the three years ended December 31, 2013, 2012 and 2011, was $2.6 million, $1.1 million and $0.1 million, respectively.

A summary of the status of unvested stock options as of December 31, 2013, and changes during the year ended December 31, 2013, is presented below:

			Weighted-
			Average
	Shares		Grant-Date
Unvested Options	(in thousands)		Fair Value
Unvested at January 1, 2013	826		$	10.25
Vested	(377	)	$	10.17
Forfeited	(1	)	$	10.33
Unvested at December 31, 2013	448		$	10.31

As of December 31, 2013, total unrecognized compensation cost of $18.1 million was related to unvested stock-based compensation arrangements expected to be awarded under the 2011 Plan and granted under the 1994 Plan. This cost is expected to be recognized over a weighted-average period of 1.5 years. Stock options granted under the 1995 Plan are fully vested and the associated expense is fully recognized as of the date of grant.

The Company also maintains a Stock Bonus Plan whereby it awards shares to employees, who do not otherwise participate in one of the Company’s stock-based incentive plans. The number of shares awarded, as well as the period of service, is determined by the Compensation and Leadership Development Committee of the Board. In 2013, 2012 and 2011, the Company issued, and committed to issue, 11 thousand, 9 thousand and 12 thousand shares, respectively, which resulted in pre-tax compensation charges of $0.7 million, $0.5 million and $0.7 million for the years ended December 31, 2013, 2012 and 2011, respectively. These employees are also awarded cash bonuses, which are included in these charges, to compensate for their income taxes payable as a result of the stock bonuses. Shares have been issued under this Plan in the year following the year in which the employee reached the tenth anniversary of employment with the Company.

XML

Stock-Based Compensation Plans (Tables)

12 Months Ended

Dec. 31, 2013

Stock-Based Compensation

Schedule of unvested restricted stock unit activity

					Aggregate
			Weighted-		Intrinsic
	Shares		Average		Value *
Unvested Restricted Stock Units (RSUs)	(in thousands)		Price		(in thousands)
Outstanding at January 1, 2013	264		$	33.23
Awarded	359		31.96
Vested	(174	)	32.62
Forfeited	(1	)	32.47
Outstanding at December 31, 2013	448		$	32.48	$	16,447
Outstanding and expected to vest at December 31, 2013	436		$	32.45	$	16,021

*  The intrinsic value is calculated using the closing price per share of $36.73 as reported by the New York Stock Exchange on December 31, 2013.

Assumptions used to determine the fair value of stock options granted

The assumptions used in the Black-Scholes option pricing model for options granted in 2011 were as follows:

Number		Risk-
of Options		Free
Granted	Grant	Interest		Dividend		Expected				Fair
(in thousands)	Date	Rate		Yield		Life	Volatility		Exercise Price	Value
1994 Plan
1,362	02/03/11	2.62	%	1.75	%	6.2 years	39.0	%	$29.66 to $32.63	$	10.33
1995 Plan
30	02/15/11	2.92	%	1.76	%	6.6 years	38.0	%	$29.58	$	10.49

Non-Qualified Stock Options

Stock-Based Compensation

Summary of stock option activity

					Weighted-
			Weighted-		Average	Aggregate
			Average		Remaining	Intrinsic
	Shares		Exercise		Contractual	Value*
Non-Qualified Stock Options	(in thousands)		Price		Life	(in thousands)
Outstanding at January 1, 2013	1,907		$	31.58	3.8	$	5,347
Exercised	(512	)	$	29.39
Forfeited	(374	)	$	40.65
Outstanding at December 31, 2013	1,021		$	29.35	4.0	$	7,539
Outstanding and expected to vest at December 31, 2013	1,003		$	29.35	4.0	$	7,404
Exercisable at December 31, 2013	573		$	29.14	3.9	$	4,352

* The intrinsic value represents the amount by which the fair market value of the underlying common stock exceeds the exercise price of the option, using the closing price per share of $36.73 as reported by the New York Stock Exchange on December 31, 2013.

Unvested Stock Options

Stock-Based Compensation

Summary of stock option activity

			Weighted-
			Average
	Shares		Grant-Date
Unvested Options	(in thousands)		Fair Value
Unvested at January 1, 2013	826		$	10.25
Vested	(377	)	$	10.17
Forfeited	(1	)	$	10.33
Unvested at December 31, 2013	448		$	10.31

XML

Subsequent Events

12 Months Ended

Dec. 31, 2013

Subsequent Events

Subsequent Events

15.          Subsequent Events

At its meeting on February 3, 2014, the Company’s Board of Directors declared a cash dividend of $0.125 per share. The record date for the dividend will be April 3, 2014, and it will be paid on April 24, 2014. At the same meeting, the Board also authorized the Company to repurchase up to $50.0 million of the Company’s common stock. The authorization will remain in effect through the end of 2014.

XML

Consolidated Statements of Stockholders' Equity (USD $) In Thousands, unless otherwise specified	Total	Common Stock	Additional Paid-in Capital	Retained Earnings	Accumulated Other Comprehensive Income	Treasury Stock
Balance at Dec. 31, 2010	$ 787,793	$ 500	$ 165,425	$ 607,241	$ 14,627
Balance (in shares) at Dec. 31, 2010		50,096
Increase (Decrease) in Stockholders' Equity
Net income	50,900			50,900
Translation adjustment, net of tax	(7,844)				(7,844)
Options exercised	214		214
Options exercised (in shares)		8
Stock-based compensation expense	6,194		6,194
Tax benefit of options exercised	(1,554)		(1,554)
Repurchase of common stock	(53,208)					(53,208)
Repurchase of common stock (in shares)		(1,948)
Retirement of common stock		(19)		(53,189)		53,208
Cash dividends declared on common stock, $0.375, $0.625 and $0.50 per share for the year ended December 31, 2013, 2012 and 2011, respectively	(24,336)			(24,336)
Common stock issued at $33.81, $33.71 and $30.91 per share for the year ended December 31, 2013, 2012 and 2011, respectively	204		204
Common stock issued (in shares)		7
Balance at Dec. 31, 2011	758,363	481	170,483	580,616	6,783
Balance (in shares) at Dec. 31, 2011		48,163
Increase (Decrease) in Stockholders' Equity
Net income	41,918			41,918
Translation adjustment, net of tax	5,559				5,559
Pension adjustment net of tax	(243)				(243)
Options exercised	4,925	2	4,923
Options exercised (in shares)		185
Stock-based compensation expense	10,195		10,195
Tax benefit of options exercised	(233)		(233)
Cash dividends declared on common stock, $0.375, $0.625 and $0.50 per share for the year ended December 31, 2013, 2012 and 2011, respectively	(30,225)			(30,225)
Shares issued from release of restricted stock units	(1,109)		(1,109)
Shares issued from release of restricted stock units (in shares)		62
Common stock issued at $33.81, $33.71 and $30.91 per share for the year ended December 31, 2013, 2012 and 2011, respectively	418		418
Common stock issued (in shares)		12
Balance at Dec. 31, 2012	789,568	483	184,677	592,309	12,099
Balance (in shares) at Dec. 31, 2012	48,422	48,422
Increase (Decrease) in Stockholders' Equity
Net income	50,971			50,971
Translation adjustment, net of tax	5,941				5,941
Pension adjustment net of tax	46				46
Options exercised	15,057	5	15,052
Options exercised (in shares)		512
Stock-based compensation expense	12,090		12,090
Tax benefit of options exercised	(2,645)		(2,645)
Repurchase of common stock	(9,825)					(9,825)
Repurchase of common stock (in shares)		(342)
Retirement of common stock		(4)		(9,821)		9,825
Cash dividends declared on common stock, $0.375, $0.625 and $0.50 per share for the year ended December 31, 2013, 2012 and 2011, respectively	(18,170)			(18,170)
Shares issued from release of restricted stock units	(2,072)	2	(2,074)
Shares issued from release of restricted stock units (in shares)		111
Common stock issued at $33.81, $33.71 and $30.91 per share for the year ended December 31, 2013, 2012 and 2011, respectively	318		318
Common stock issued (in shares)		9
Balance at Dec. 31, 2013	$ 841,279	$ 486	$ 207,418	$ 615,289	$ 18,086
Balance (in shares) at Dec. 31, 2013	48,712	48,712

XML

Consolidated Balance Sheets (Parenthetical) (USD $) In Thousands, except Per Share data, unless otherwise specified	Dec. 31, 2013	Dec. 31, 2012
Consolidated Balance Sheets
Preferred stock, par value (in dollars per share)	$ 0.01	$ 0.01
Preferred stock, authorized shares	5,000	5,000
Preferred stock, issued shares	0	0
Preferred stock, outstanding shares	0	0
Common stock, par value (in dollars per share)	$ 0.01	$ 0.01
Common stock, authorized shares	160,000	160,000
Common stock, issued shares	48,712	48,422
Common stock, outstanding shares	48,712	48,422

XML

Debt

12 Months Ended

Dec. 31, 2013

Debt

Debt

8. Debt

The Company has revolving lines of credit with various banks in the United States and Europe. Total available credit at December 31, 2013, was $304.4 million, including revolving credit lines and an irrevocable standby letter of credit in support of various insurance deductibles.

The Company’s primary credit facility is a revolving line of credit with $300.0 million in available credit. This credit facility will expire in July 2017. Amounts borrowed under this credit facility will bear interest at an annual rate equal to either, at the Company’s option, (a) the rate for Eurocurrency deposits for the corresponding deposits of U.S. dollars appearing on Reuters LIBOR01screen page (the “LIBOR Rate”), adjusted for any reserve requirement in effect, plus a spread of 0.60% to 1.45%, determined quarterly based on the Company’s leverage ratio (at December 31, 2013, the LIBOR Rate was 0.77%), or (b) a base rate, plus a spread of 0.00% to 0.45%, determined quarterly based on the Company’s leverage ratio. The base rate is defined in a manner such that it will not be less than the LIBOR Rate. The Company will pay fees for standby letters of credit at an annual rate equal to the LIBOR Rate plus the applicable spread described above, and will pay market-based fees for commercial letters of credit. The Company is required to pay an annual facility fee of 0.15% to 0.30% of the available commitments under the credit agreement, regardless of usage, with the applicable fee determined on a quarterly basis based on the Company’s leverage ratio. The Company was also required to pay customary fees as specified in a separate fee agreement between the Company and Wells Fargo Bank, National Association, in its capacity as the Agent under the credit agreement.

The Company’s borrowing capacity under other revolving credit lines and a term note totaled $4.5 million at December 31, 2013. The other revolving credit lines and term note charge interest ranging from 1.084% to 7.25% and have maturity dates from March 2014 to December 2014. The Company had $0.1 million and $0.2 million outstanding at December 31, 2013 and 2012, respectively.

The Company and its subsidiaries are required to comply with various affirmative and negative covenants. The covenants include provisions that would limit the availability of funds as a result of a material adverse change to the Company’s financial position or results of operations. The Company was in compliance with its financial covenants under the loan agreement as of December 31, 2013.

The Company incurs interest costs, which include interest, maintenance fees and bank charges. The amount of costs incurred, capitalized, and expensed for the years ended December 31, 2013, 2012 and 2011, consisted of the following:

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Interest costs incurred	$	1,019		$	909		$	661
Less: Interest capitalized	(118		)	(116		)	(88		)
Interest expense	$	901		$	793		$	573

XML

Document and Entity Information (USD $)	12 Months Ended
	Dec. 31, 2013	Feb. 24, 2014	Jun. 30, 2013
Document and Entity Information
Entity Registrant Name	SIMPSON MANUFACTURING CO INC /CA/
Entity Central Index Key	0000920371
Document Type	10-K
Document Period End Date	Dec. 31, 2013
Amendment Flag	false
Current Fiscal Year End Date	--12-31
Entity Well-known Seasoned Issuer	Yes
Entity Voluntary Filers	No
Entity Current Reporting Status	Yes
Entity Filer Category	Large Accelerated Filer
Entity Public Float			$ 1,200,264,039
Entity Common Stock, Shares Outstanding		48,922,339
Document Fiscal Year Focus	2013
Document Fiscal Period Focus	FY

XML

Commitments and Contingencies

12 Months Ended

Dec. 31, 2013

Commitments and Contingencies

Commitments and Contingencies

9. Commitments and Contingencies

Leases

Certain properties occupied by the Company are leased. The leases expire at various dates through 2022 and generally require the Company to assume the obligations for insurance, property taxes and maintenance of the facilities.

Rental expense for 2013, 2012 and 2011 with respect to all leased property was approximately $6.9 million, $6.9 million and $7.3 million, respectively.

At December 31, 2013, minimum rental commitments under all non-cancelable leases were as follows:

(in thousands)

2014	$	6,671
2015	4,904
2016	3,310
2017	2,113
2018	1,301
Thereafter	10
	$	18,309

Some of these minimum rental commitments contain renewal options and provide for periodic rental adjustments based on changes in the consumer price index or current market rental rates. Other rental commitments provide options to cancel early without penalty. Future minimum rental payments, under the earliest cancellation options, are included in minimum rental commitments in the table above.

Other Contractual Obligations

Purchase obligations consist of commitments primarily related to the acquisition, construction or expansion of facilities and equipment, consulting agreements, and minimum purchase quantities of certain raw materials. The Company is not a party to any long-term supply contracts with respect to the purchase of raw materials or finished goods. Debt interest obligations include interest payments on fixed-term debt, line-of-credit borrowings and annual facility fees on the Company’s primary line-of-credit facility. Interest on line-of-credit facilities was estimated based on historical borrowings and repayment patterns.

At December 31, 2013, other contractual obligations were as follows:

(in thousands)

			Debt
	Purchase		Interest
	Obligations		Obligations		Total
2014	$	14,775	$	450	$	15,225
2015	491		450		941
2016	42		450		492
2017	41		263		304
2018	41		—		41
Thereafter	—		—		—
	$	15,390	$	1,613	$	17,003

Employee Relations

Approximately 14% of the Company’s employees are represented by labor unions and are covered by collective bargaining agreements. Simpson Strong-Tie’s facility in San Bernardino County, California, has two of SST’s collective bargaining agreements, one with tool and die craftsmen and maintenance workers, and the other with sheetmetal workers. These two contracts expire March 2014 and June 2014, respectively. Negotiations with the tool and die craftsmen and maintenance workers are ongoing. Negotiations to extend the sheetmetal workers labor contract have not begun. Negotiations to extend these two contracts are not likely to have a material adverse effect on the Company’s ability to provide products to its customers or on the Company’s profitability, even if new agreements are not reached before the existing agreements expire. SST’s facility in Stockton, California, is also a union facility with two collective bargaining agreements, which also cover its tool and die craftsmen and maintenance workers, and its sheetmetal workers. These two contracts will expire June and September 2015, respectively.

Environmental

The Company’s policy with regard to environmental liabilities is to accrue for future environmental assessments and remediation costs when information becomes available that indicates that it is probable that the Company is liable for any related claims and assessments and the amount of the liability is reasonably estimable. The Company does not believe that these matters will have a material adverse effect on the Company’s financial condition, cash flows or results of operations.

Litigation

From time to time, the Company is involved in various legal proceedings and other matters arising in the normal course of business. The resolution of claims and litigation is subject to inherent uncertainty and could have a material adverse effect on the Company’s financial condition, cash flows and results of operations.

Pending Claims

Four lawsuits (the “Cases”) have been filed against the Company in the Hawaii First Circuit Court: Alvarez v. Haseko Homes, Inc. and Simpson Manufacturing, Inc., Civil No. 09-1-2697-11 (“Case 1”); Ke Noho Kai Development, LLC v. Simpson Strong-Tie Company, Inc., and Honolulu Wood Treating Co., LTD., Case No. 09-1-1491-06 SSM (“Case 2”); North American Specialty Ins. Co. v. Simpson Strong-Tie Company, Inc. and K.C. Metal Products, Inc., Case No. 09-1-1490-06 VSM (“Case 3”); and Charles et al. v. Haseko Homes, Inc. et al. and Third Party Plaintiffs Haseko Homes, Inc. et al. v. Simpson Strong-Tie Company, Inc., et al., Civil No. 09-1-1932-08 (“Case 4”).  Case 1 was filed on November 18, 2009.  Cases 2 and 3 were originally filed on June 30, 2009.  Case 4 was filed on August 19, 2009.  The Cases all relate to alleged premature corrosion of the Company’s strap tie holdown products installed in buildings in a housing development known as Ocean Pointe in Honolulu, Hawaii, allegedly causing property damage.  Case 1 is a putative class action brought by the owners of allegedly affected Ocean Pointe houses.  Case 1 was originally filed as Kai et al. v. Haseko Homes, Inc., Haseko Construction, Inc. and Simpson Manufacturing, Inc., Case No. 09-1-1476, but was voluntarily dismissed and then re-filed with a new representative plaintiff.  Case 2 is an action by the builders and developers of Ocean Pointe against the Company, claiming that either the Company’s strap tie holdowns are defective in design or manufacture or the Company failed to provide adequate warnings regarding the products’ susceptibility to corrosion in certain environments.  Case 3 is a subrogation action brought by the insurance company for the builders and developers against the Company claiming the insurance company expended funds to correct problems allegedly caused by the Company’s products.  Case 4 is a putative class action brought, like Case 1, by owners of allegedly affected Ocean Pointe homes.  In Case 4, Haseko Homes, Inc. (“Haseko”), the developer of the Ocean Pointe development, brought a third party complaint against the Company alleging that any damages for which Haseko may be liable are actually the fault of the Company. Similarly, Haseko’s sub-contractors on the Ocean Pointe development brought cross-claims against the Company seeking indemnity and contribution for any amounts for which they may ultimately be found liable. None of the Cases alleges a specific amount of damages sought, although each of the Cases seeks compensatory damages, and Case 1 seeks punitive damages.  Cases 1 and 4 have been consolidated.  In December 2012, the Court granted the Company summary judgment on the claims asserted by the plaintiff homeowners in Cases 1 and 4, and on the third party complaint and cross-claims asserted by Haseko and the sub-contractors, respectively, in Case 4. In April 2013, the Court granted Haseko and the sub-contractors’ motion for leave to amend their cross-claims to allege a claim for negligent misrepresentation. The Company continues to investigate the facts underlying the claims asserted in the Cases, including, among other things, the cause of the alleged corrosion; the severity of any problems shown to exist; the buildings affected; the responsibility of the general contractor, various subcontractors and other construction professionals for the alleged damages; the amount, if any, of damages suffered; and the costs of repair, if needed.  At this time, the likelihood that the Company will be found liable under any legal theory and the extent of such liability, if any, are unknown.  Management believes the Cases may not be resolved for an extended period.  The Company is defending itself vigorously in connection with the Cases.

Based on facts currently known to the Company, the Company believes that all or part of the claims alleged in the Cases may be covered by its insurance policies.  On April 19, 2011, an action was filed in the United States District Court for the District of Hawaii, National Union Fire Insurance Company of Pittsburgh, PA v. Simpson Manufacturing Company, Inc., et al., Civil No. 11-00254 ACK.  In this action, Plaintiff National Union Fire Insurance Company of Pittsburgh, Pennsylvania (“National Union”), which issued certain Commercial General Liability insurance policies to the Company, seeks declaratory relief in the Cases with respect to its obligations to defend or indemnify the Company, Simpson Strong-Tie Company Inc., and a vendor of the Company’s strap tie holdown products.  By Order dated November 7, 2011, all proceedings in the National Union action have been stayed.  If the stay is lifted and the National Union action is not dismissed, the Company intends vigorously to defend all claims advanced by National Union.

On April 12, 2011, Fireman’s Fund Insurance Company (“Fireman’s Fund”), another of the Company’s general liability insurers, sued Hartford Fire Insurance Company (“Hartford”), a third insurance company from whom the Company purchased general liability insurance, in the United States District Court for the Northern District of California, Fireman’s Fund Insurance Company v. Hartford Fire Insurance Company, Civil No. 11 1789 SBA (the “Fireman’s Fund action”).  The Company has intervened in the Fireman’s Fund action and seeks a stay of proceedings in that action as well, pending resolution of the underlying Ocean Pointe cases.

On November 21, 2011, the Company commenced a lawsuit against National Union, Fireman’s Fund, Hartford and others in the Superior Court of the State of California in and for the City and County of San Francisco (the “San Francisco coverage action”).  In the San Francisco coverage action, the Company alleges generally that the separate pendency of the National Union action and the Fireman’s Fund action presents a risk of inconsistent adjudications; that the San Francisco Superior Court has jurisdiction over all of the parties and should exercise jurisdiction at the appropriate time to resolve any and all disputes that have arisen or may in the future arise among the Company and its liability insurers; and that the San Francisco coverage action should also be stayed pending resolution of the underlying Ocean Pointe Cases. The San Francisco coverage action has been ordered stayed pending resolution of the Cases.

Nishimura v. Gentry Homes, Ltd; Simpson Manufacturing Co., Inc.; and Simpson Strong-Tie Company, Inc., Civil no. 11-1-1522-07, was filed in the Circuit Court of the First Circuit of Hawaii on July 20, 2011.  The Nishimura case alleges premature corrosion of the Company’s strap tie holdown products in a housing development at Ewa Beach in Honolulu, Hawaii.  In February 2012, the Court dismissed three of the five claims the plaintiffs had asserted against the Company.  In December 2013, the Court granted the Company’s motion for summary judgment on the remaining claims.  Currently, the case is closed, though it remains subject to appeal.

With respect to these legal proceedings, individually and in the aggregate, the Company has not yet been able to determine whether an unfavorable outcome is probable or reasonably possible and has not been able to reasonably estimate the amount or range of any possible loss. As a result, no amounts have been accrued or disclosed in the accompanying consolidated financial statements with respect to these legal proceedings.

The Company is not engaged in any other legal proceedings as of the date hereof, which the Company expects individually or in the aggregate to have a material adverse effect on the Company’s financial condition, cash flows or results of operations. The resolution of claims and litigation is subject to inherent uncertainty and could have a material adverse effect on the Company’s financial condition, cash flows or results of operations.

Other

Corrosion, hydrogen enbrittlement, cracking, material hardness, wood pressure-treating chemicals, misinstallations, misuse, design and assembly flaws, manufacturing defects, environmental conditions or other factors can contribute to failure of fasteners, connectors, anchors, adhesives and tool products. On occasion, some of the products that the Company sells have failed, although the Company has not incurred any material liability resulting from those failures. The Company attempts to avoid such failures by establishing and monitoring appropriate product specifications, manufacturing quality control procedures, inspection procedures and information on appropriate installation methods and conditions. The Company subjects its products to extensive testing, with results and conclusions published in Company catalogues and on its websites. Based on test results to date, the Company believes that, generally, if its products are appropriately selected, installed and used in accordance with the Company’s guidance, they may be reliably used in appropriate applications.

XML

Consolidated Statements of Operations (USD $) In Thousands, except Per Share data, unless otherwise specified	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Consolidated Statements of Operations
Net sales	$ 706,329	$ 657,236	$ 603,446
Cost of sales	391,791	373,759	332,642
Gross profit	314,538	283,477	270,804
Operating expenses:
Research and development and other engineering	36,843	35,919	25,886
Selling	85,102	82,364	73,568
General and administrative	109,077	100,973	95,820
Impairment of Goodwill		2,346	1,282
Net loss on disposal of assets	2,038	166	191
Total operating expenses	233,060	221,768	196,747
Income from operations	81,478	61,709	74,057
Income in equity method investment, before tax			4,389
Interest income	987	1,005	913
Interest expense	(901)	(793)	(573)
Income before taxes	81,564	61,921	78,786
Provision for income taxes	30,593	20,003	27,886
Net income	$ 50,971	$ 41,918	$ 50,900
Earnings per common share:
Basic (in dollars per share)	$ 1.05	$ 0.87	$ 1.04
Diluted (in dollars per share)	$ 1.05	$ 0.87	$ 1.04
Weighted average number of shares outstanding
Basic (in shares)	48,521	48,339	48,974
Diluted (in shares)	48,673	48,412	49,023

XML

Trade Accounts Receivable, net

12 Months Ended

Dec. 31, 2013

Trade Accounts Receivable, net

Trade Accounts Receivable, net

3. Trade Accounts Receivable, net

Trade accounts receivable consisted of the following:

(in thousands)

	December 31,
	2013			2012
Trade accounts receivable	$	92,413		$	85,732
Allowance for doubtful accounts	(945		)	(1,288		)
Allowance for sales discounts	(1,451		)	(1,632		)
	$	90,017		$	82,812

The Company sells products on credit and generally does not require collateral.

XML

Acquisitions

12 Months Ended

Dec. 31, 2013

Acquisitions

Acquisitions

2. Acquisitions

In December 2011, the Company purchased the assets, net of certain liabilities, of Fox Industries, Inc., a Maryland corporation (“Fox Industries”), a manufacturer of construction products and systems for restoring, protecting and strengthening concrete. The acquisition broadened the Company’s concrete construction product line, while also extending the overall product line into more commercial, industrial and infrastructure markets. The purchase price was $8.7 million. The Company recorded goodwill of $3.9 million and intangible assets subject to amortization of $2.9 million in the North America segment, the amortization of which is deductible for income tax purposes. The weighted-average amortization period for the intangible assets is 9.7 years. Net tangible assets, including accounts receivable, inventory, certain prepaid expenses, machinery and equipment and certain liabilities, accounted for the balance of the purchase price.

In December 2011, the Company purchased the assets of Automatic Stamping, LLC and Automatic Stamping Auxiliary Services, LLC, both North Carolina limited liability companies, and certain real property and improvements owned by TIMMCO, Inc., a North Carolina corporation (collectively “Automatic Stamping”). Automatic Stamping was a manufacturer of truss plates. Combined with the Company’s truss design software, its operating expertise and means of distribution, the Company plans to offer truss plates and software products to its North America customer base. The purchase price was $43.5 million. As a result of the acquisition, the Company has recorded goodwill of $29.5 million and intangible assets subject to amortization of $4.6 million in the North America segment, the amortization of which is deductible for income tax purposes. The weighted-average amortization period for the intangible assets is 4.8 years. Net tangible assets, including accounts receivable, inventory, land, building and machinery and equipment, accounted for the balance of the purchase price.

In January 2012, the Company purchased all of the shares of S&P Clever, for $58.1 million, subject to post-closing adjustments. S&P Clever manufactures and sells engineered materials to repair, strengthen and restore concrete, masonry and asphalt and has operations in Switzerland, Germany, Portugal, Poland, The Netherlands and Austria. Payments under the purchase agreement included cash payments of $57.5 million and contingent consideration of $0.6 million payable over a three-year period if sales goals are met. As a result of the acquisition, the Company has increased its presence in the infrastructure, commercial and industrial construction markets in Europe. The Company’s measurement of assets acquired and liabilities assumed included cash and cash equivalents of $6.8 million, other current assets of $10.8 million, non-current assets of $53.4 million, current liabilities of $12.6 million and non-current liabilities of $0.2 million. Included in non-current assets is goodwill of $19.3 million, which was assigned to the Europe segment and is not deductible for tax purposes, intangible assets of $20.5 million, the amortization of which is not deductible for tax purposes, and long-lived intangibles of $4.8 million related to IPR&D assets, which will be amortized when the Company markets the product for sale. The IPR&D assets at the time of acquisition were entering a field testing phase and were focused on new forms of strengthening structures. The weighted-average amortization period for the intangible assets is 9.8 years.

In March 2012, the Company purchased substantially all of the assets of CarbonWrap Solutions, L.L.C. (“CarbonWrap”) for $5.5 million, subject to post-closing adjustments. CarbonWrap develops fiber-reinforced polymer products primarily for infrastructure and transportation projects. Payments under the purchase agreement totaled $5.3 million in cash and contingent consideration of $0.2 million paid on resolution of specified post-closing contingencies to the principal officer of CarbonWrap, who, on closing, was employed by the Company. The Company’s measurement included goodwill of $3.5 million, which was assigned to the North American segment and is deductible for tax purposes, and intangible assets of $1.7 million, which is subject to tax-deductible amortization. Net tangible assets consisting of accounts receivable, inventory, equipment and prepaid expenses accounted for the balance of the purchase price. In December 2013, the Company sold the CarbonWrap product line for $3.3 million, net of termination expenses, and realized a gain of $1.4 million. See note 1 - Sale of Product Line.

In December 2012, the Company completed a transaction with Keymark Enterprises LLC (“Keymark”). In 2011, the Company had purchased various software assets from Keymark and had engaged Keymark to perform certain software development for the Company, for which the Company had agreed to compensate Keymark at rates equal to a multiple of Keymark’s costs. In the current transaction, the Company paid Keymark $9.1 million, hired thirty-nine Keymark employees to perform the development work that Keymark had previously been engaged to perform and purchased from Keymark various assets needed for that work. This transaction also included termination of the 2011 software development agreement and the Company is entitled to certain software license revenue that was previously received by Keymark. The Company’s measurement of the assets acquired included goodwill of $5.9 million, which was assigned to the North American segment and is deductible for tax purposes, and intangibles of $3.0 million, which is subject to tax-deductible amortization. Equipment and prepaid expenses accounted for the balance of the purchase. The weighted-average amortization period for the intangible assets is 4.9 years.

In February 2013, the Company purchased certain assets relating to the TJ® ShearBrace (“ShearBrace”) product line of Weyerhaeuser NR Company (“Weyerhaeuser”), a Washington corporation, for $5.3 million in cash. The ShearBrace is a line of pre-fabricated shearwalls that complement the Company’s Strong-Wall shearwall, and is sold throughout North America. The Company’s March 2013 provisional measurement of assets acquired included goodwill of $2.6 million, which was assigned to the North American segment, and intangible assets of $1.9 million, both of which are subject to tax-deductible amortization. The provisional measurement of the assets acquired was revised in the fourth quarter to include goodwill of $0.9 million and intangibles of $3.6 million, both of which are subject to tax-deductible amortization. Net tangible assets consisting of inventory and equipment accounted for the balance of the purchase price. The estimated weighted-average amortization period for the intangible assets is 13.4 years.

In November 2013, the Company purchased certain assets related to a connector product line from Bierbach GmbH & Co. KG (“Bierbach”), a Germany corporation, for $1.2 million in cash and a contingent liability of $0.8 million. Bierbach manufactured and sold a line of connectors, primarily in Germany. The Company’s provisional measurement of assets acquired included goodwill of $0.7 million, which was assigned to the Europe segment, and intangible assets of $0.6 million, both of which are subject to tax-deductible amortization. Net tangible assets consisting of inventory and tool and dyes accounted for the balance of the purchase price.

The Company has not finalized the purchase price allocation for the businesses acquired in 2013, as the Company is still obtaining information and analyzing the fair value of certain assets.

Under the business combinations topic of the FASB ASC, the Company accounted for these acquisitions as business combinations and ascribed acquisition-date fair values to the acquired assets and assumed liabilities. Provisional fair value measurements were made in the first quarter and fourth quarter of 2013 for acquired assets and assumed liabilities. Adjustments to those measurements may be made in subsequent periods, up to one year from the acquisition date, as information necessary to complete the analysis is obtained. Fair value of intangible assets was based on Level 3 inputs. The Company expects the measurement process for each acquisition to be finalized within a year of its acquisition date.

The results of operations of the businesses acquired in 2013 are included in the Company’s consolidated results of operations since the date of the acquisition. Results of operations of acquired businesses for periods prior to 2013 were not material to the Company on an individual or aggregate basis, and accordingly, pro forma results of operations have not been presented.

XML

Segment Information

12 Months Ended

Dec. 31, 2013

Segment Information

Segment Information

14.          Segment Information

The Company is organized into three reporting segments. The segments are defined by the regions where the Company’s products are manufactured, marketed and distributed to the Company’s customers. The three regional segments are the North America segment, comprising primarily the United States and Canada, the Europe segment and the Asia/Pacific segment, comprising the Company’s operations in China, Hong Kong, the South Pacific and the Middle East. These segments are similar in several ways, including the types of materials, the production processes, the distribution channels and the product applications.

The Administrative & All Other column primarily includes expenses such as self-insured workers compensation claims for employees of the Company’s venting business, which was sold in 2010, stock-based compensation for certain members of management, interest expense, foreign exchange gains or losses and income tax expense, as well as revenues and expenses related to real estate activities, such as rental income and depreciation expense on the Company’s property in Vacaville, California, which the Company has leased to a third party for a 10-year term expiring in August 2020.

The following table shows certain measurements used by management to assess the performance of the segments described above as of December 31, 2013, 2012 and 2011, or for the years then ended:

(in thousands)

	North				Asia/			Administrative
2013	America		Europe		Pacific			& All Other			Total
Net sales	$	572,789	$	117,799	$	14,793		$	948		$	706,329
Sales to other segments *	4,735		352		16,334			—			21,421
Income (loss) from operations	84,885		1,258		(2,202		)	(2,463		)	81,478
Depreciation and amortization	17,707		7,019		1,499			1,293			27,518
Impairment of long-lived asset	—		1,025		—			—			1,025
Significant non-cash charges	8,867		1,561		142			2,177			12,747
Provision for (benefit from) income taxes	26,372		2,906		(101		)	1,416			30,593
Capital expenditures and asset acquisitions, net of cash acquired	19,424		2,244		1,620			9			23,297
Total assets	627,196		201,384		31,560			93,473			953,613

	North					Asia/			Administrative
2012	America		Europe			Pacific			& All Other		Total
Net sales	$	522,895	$	122,549		$	10,843		$	949	$	657,236
Sales to other segments *	5,121		430			15,721			—		21,272
Income (loss) from operations	71,586		(8,095		)	(2,799		)	1,017		61,709
Depreciation and amortization	16,317		7,744			1,330			1,466		26,857
Impairment of goodwill	—		2,346			—			—		2,346
Impairment of long-lived asset	461		342			—			—		803
Significant non-cash charges	7,369		1,053			194			2,051		10,667
Provision for income taxes	15,037		3,544			323			1,099		20,003
Capital expenditures and asset acquisitions, net of cash acquired	23,014		63,156			916			—		87,086
Total assets	583,501		194,000			30,455			82,366		890,322

	North				Asia/			Administrative
2011	America		Europe		Pacific			& All Other			Total
Net sales	$	474,722	$	118,246	$	9,528		$	950		$	603,446
Sales to other segments *	4,805		575		11,359			—			16,739
Income (loss) from operations	75,350		1,296		(1,471		)	(1,118		)	74,057
Depreciation and amortization	13,194		4,849		1,211			1,497			20,751
Impairment of goodwill	—		1,282		—			—			1,282
Impairment of long-lived asset	1,094		—		—			—			1,094
Significant non-cash charges	4,464		966		129			1,278			6,837
Provision for (benefit from) income taxes	25,348		2,588		(805		)	755			27,886
Capital expenditures and asset acquisitions, net of cash acquired	72,291		5,062		544			19			77,916
Total assets	540,082		180,016		29,306			86,683			836,087

* Sales to other segments are eliminated on consolidation.

Cash collected by the Company’s United States subsidiaries is routinely transferred into the Company’s cash management accounts, and therefore has been included in the total assets of “Administrative & All Other.” Cash and short-term investment balances in “Administrative & All Other” were $156.0 million, $91.9 million and $68.5 million as of December 31, 2013, 2012 and 2011, respectively. As of December 31, 2013, the Company had $96.4 million or 38.4% of its cash and cash equivalents held outside the United States in accounts belonging to the Company’s various foreign operating entities. The majority of this balance is held in foreign currencies and could be subject to additional taxation if it were repatriated to the United States. The Company has no plans to repatriate cash and cash equivalents held outside the United States as the Company expects to use such funds for future international growth and acquisitions.

The significant non-cash charges comprise compensation related to the awards under the stock-based incentive plans and the stock bonus plan. The Company’s measure of profit or loss for its reportable segments is income (loss) from operations. The reconciling amounts between consolidated income before tax and consolidated income from operations are net interest income, which is primarily attributed to “Administrative & All Other” and loss from equity method investment, which is attributed to the North America segment.

The following table shows the geographic distribution of how the Company’s net sales and long-lived assets as of December 31, 2013, 2012 and 2011, or for the years then ended:

(in thousands)

	2013				2012				2011
	Net		Long-Lived		Net		Long-Lived		Net		Long-Lived
	Sales		Assets		Sales		Assets		Sales		Assets
United States	$	531,968	$	152,644	$	479,390	$	152,456	$	433,242	$	165,363
Canada	41,626		5,763		44,359		6,182		42,350		5,964
Denmark	14,993		1,907		15,096		2,252		17,158		2,607
United Kingdom	21,852		1,249		23,504		1,232		23,598		1,370
France	36,708		9,302		37,826		10,036		43,319		10,530
Germany	26,058		17,446		27,919		17,651		27,237		4,957
Switzerland	6,019		11,649		6,653		11,628		—		—
Poland	5,982		692		4,847		795		3,004		224
The Netherlands	4,306		63		3,336		92		—		—
Portugal	804		688		1,437		734		—		—
Ireland	31		—		791		2,757		2,720		3,075
China/Hong Kong	9,802		9,499		6,054		9,675		4,754		10,022
Australia	3,289		356		3,386		441		4,586		369
New Zealand	1,701		125		1,404		154		188		138
Other countries	1,190		739		1,234		577		1,290		560
	$	706,329	$	212,122	$	657,236	$	216,662	$	603,446	$	205,179

Net sales and long-lived assets, net of intangible assets, are attributable to the country where the operations are located.

The following table show the distribution of the Company’s net sales by product as of December 31, 2013, 2012 and 2011, or for the years then ended:

(in thousands)

	2013		2012		2011
Wood Construction	$	596,849	$	558,113	$	536,131
Concrete Construction	108,341		97,967		66,031
Other	1,139		1,156		1,284
Total	$	706,329	$	657,236	$	603,446

Wood construction products include connectors, truss plates, fastening systems, fasteners and pre-fabricated shearwalls and are used for connecting and strengthening wood-based construction primarily in the residential construction market. Concrete construction products include adhesives, specialty chemicals, mechanical anchors, carbide drill bits, powder actuated tools and reinforcing fiber materials and are used for restoration, protection or strengthening concrete, masonry and steel construction in residential, industrial, commercial and infrastructure construction.

The Company’s largest customer, attributable mostly to the North America segment, accounted for 10% of net sales for each of the years ended December 31, 2012 and 2011. No customer accounted for as much as 10% of net sales for the year ended December 31, 2013.

XML

Income Taxes

12 Months Ended

Dec. 31, 2013

Income Taxes

Income Taxes

10. Income Taxes

The provision for income taxes from operations consisted of the following:

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Current
Federal	$	19,804		$	13,163		$	21,040
State	3,243			2,732			4,427
Foreign	3,926			3,920			4,582
Deferred
Federal	3,646			(544		)	(574		)
State	404			(98		)	(358		)
Foreign	(430		)	830			(1,231		)
	$	30,593		$	20,003		$	27,886

Income and loss from operations before income taxes for the years ended December 31, 2013, 2012 and 2011, consisted of the following:

(in thousands)

	Years Ended December 31,
	2013		2012			2011
Domestic	$	74,912	$	65,705		$	68,961
Foreign	6,652		(3,784		)	9,825
	$	81,564	$	61,921		$	78,786

Reconciliations between the statutory federal income tax rates and the Company’s effective income tax rates as a percentage of income before income taxes for its operations were as follows:

(in thousands)

	Years Ended December 31,
	2013		2012		2011
Federal tax rate	35.0	%	35.0	%	35.0	%
State taxes, net of federal benefit	3.0	%	2.9	%	3.4	%
Tax benefit of domestic manufacturing deduction	(2.2	)%	(2.1	)%	(2.5	)%
Change in valuation allowance	1.3	%	6.0	%	(0.3	)%
Difference between United States statutory and foreign local tax rates	0.1	%	2.6	%	0.3	%
Change in uncertain tax position	(0.4	)%	(0.3	)%	—
Worthless stock deduction on Irish subsidiary	—		(15.4	)%	—
Non-deductible goodwill write-off	—		1.1	%	—
Non-deductible professional fee	—		1.3	%	—
Other	0.7	%	1.2	%	(0.5	)%
Effective income tax rate	37.5	%	32.3	%	35.4	%

In 2012, the Company recorded a worthless stock deduction for its investment in the Company’s wholly-owned Irish subsidiary. The deduction resulted in approximately $9.9 million tax benefit on the Company’s U.S. tax returns.

The tax effects of the significant temporary differences that constitute the deferred tax assets and liabilities at December 31, 2013, 2012 and 2011, were as follows:

(in thousands)

	December 31,
	2013			2012			2011
Current deferred tax assets
State tax	$	1,415		$	1,133		$	1,586
Workers’ compensation	1,780			1,814			2,123
Health claims	601			516			549
Vacation liability	1,219			1,037			865
Allowance for doubtful accounts	181			332			291
Inventories	6,691			5,713			4,796
Sales incentive and advertising allowances	516			580			408
Intangible rights write-off	—			—			194
Acquisition expenses	—			—			477
Unrealized foreign exchange gain or loss	124			39			57
Other, net	172			309			428
	$	12,699		$	11,473		$	11,774
Long-term deferred tax assets (liabilities)
Depreciation	$	(2,671	)	$	(2,434	)	$	(3,067	)
Goodwill and other intangibles amortization	(9,781		)	(4,086		)	(314		)
Deferred compensation related to stock options	6,104			7,296			5,485
Uncertain tax positions’ unrecognized tax benefits	1,532			1,140			1,115
Non-United States tax loss carry forward	5,472			8,064			5,912
Tax effect on cumulative translation adjustment	(729		)	(763		)	(812		)
Other	940			526			811
	867			9,743			9,130
Less valuation allowances	(5,546		)	(9,719		)	(6,279		)
	$	(4,679	)	$	24		$	2,851

The total deferred tax assets for the years ended December 31, 2013, 2012 and 2011, were $22.0 million, $21.6 million and $21.4 million, respectively. The total deferred tax liabilities for the years ended December 31, 2013, 2012, and 2011, were $14.0 million, $10.1 million and $6.7 million, respectively.

At December 31, 2013, the Company had $23.6 million of pre-tax loss carryforwards in various non-United States taxing jurisdictions, which excludes approximately $11.6 million that was generated by the Company’s now inactive wholly owned Irish subsidiary. Tax loss carryforwards of $0.9 million, $0.7 million, $0.8 million, $1.7 million and $1.5 million will expire in 2014, 2015, 2016, 2017 and 2018, respectively, if not used. The remaining tax losses can be carried forward indefinitely.

At December 31, 2013 and 2012, the Company had deferred tax valuation allowances of $5.5 million and $9.7 million, respectively. The valuation allowance decreased $4.2 million and $0.9 million for the years ended December 31, 2013 and 2011, respectively, and increased $3.4 million for the year ended December 31, 2012. The decrease in valuation allowance from December 31, 2012, is mainly attributable to the removal of the deferred tax asset generated by the Company’s wholly owned Irish subsidiary.

The Company does not provide for federal income taxes on the undistributed earnings of its international subsidiaries because such earnings are reinvested and, in the Company’s opinion, will continue to be reinvested indefinitely. At December 31, 2013, 2012 and 2011, the Company had not provided for federal income taxes on undistributed earnings of $34.8 million, $29.0 million and $20.9 million, respectively, from its international subsidiaries. Should these earnings be distributed in the form of dividends or otherwise, the Company would be subject to both United States income taxes and withholding taxes in various international jurisdictions. These taxes may be partially offset by United States foreign tax credits. Determination of the related amount of unrecognized deferred United States income taxes is not practicable because of the complexities associated with this hypothetical calculation. United States federal income taxes are provided on the earnings of the Company’s foreign branches, which are included in the United States federal income tax return.

A reconciliation of the beginning and ending amounts of unrecognized tax benefits in 2013, 2012 and 2011 was as follows, including foreign translation amounts:

(in thousands)

	2013			2012			2011
Balance at January 1	$	3,843		$	4,683		$	5,862
Additions based on tax positions related to prior years	297			527			18
Reductions based on tax positions related to prior years	(494		)	(1,163		)	(681		)
Additions for tax positions of the current year	837			933			570
Settlements	(435		)	(486		)	(362		)
Lapse of statute of limitations	(592		)	(651		)	(724		)
Balance at December 31	$	3,456		$	3,843		$	4,683

Included in the balance of unrecognized tax benefits at December 31, 2013, 2012 and 2011, are tax positions of $0.7 million, $0.9 million and $1.1 million, respectively, which, if recognized, would reduce the effective tax rate.

The Company believes it is reasonably possible that the total amounts of unrecognized tax benefits will decrease by approximately $1.8 million within the next 12 months. The anticipated decrease is primarily attributable to unrecognized tax benefits relating to tax depreciation of certain categories of fixed assets in the U.S., tax benefits that the Company expects to recognize on filing an application for a change in accounting method in response to regulations issued by the IRS, and the effective settlement of tax positions as a result of the completion of an income tax audit.

The Company recognizes accrued interest and penalties related to unrecognized tax benefits in income tax expense, which is a continuation of the Company’s historical accounting policy. During the years ended December 31, 2013, 2012 and 2011, accrued interest decreased by $0.3 million, $0.4 million and $0.0 million, respectively, as a result of the reversal of accrued interest associated with the lapse of statutes of limitations. At December 31, 2013, 2012 and 2011, the Company had accrued $0.4 million, $0.7 million and $1.1 million, respectively, for the potential payment of interest, before income tax benefits.

At December 31, 2013, the Company remained subject to United States federal income tax examinations for the tax years 2010 through 2013. In addition, the Company remained subject to state, local and foreign income tax examinations primarily for the tax years 2008 through 2013.

XML

Investments

12 Months Ended

Dec. 31, 2013

Investments

Investments

6. Investments

During 2011, the Company purchased the software assets of Keymark valued at $11.5 million for $6.2 million in net cash payments and its 46.1% equity interest in Keymark. The transactions resulted in a gain of $4.3 million based on the difference between the fair value of the Company’s investment in Keymark less its carrying value of $1.0 million. The acquired software is used by customers of the Company in designing and engineering residential structures. (See Note 2).

XML

Retirement Plans (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Dec. 31, 2013 item	Dec. 31, 2012	Dec. 31, 2011
Defined contribution plans
Number of defined contribution retirement plans	6
Cost of defined contribution plans	$ 8.2	$ 7.7	$ 6.7
Contributions to pension funds	$ 2.2	$ 2.1	$ 1.8
Defined contribution plan - U.S Plans
Defined contribution plans
Number of defined contribution retirement plans	2
Defined contribution plan - European and Canadian Plans
Defined contribution plans
Number of defined contribution retirement plans	4
Defined contribution plan - European and Canadian Plans | Minimum
Defined contribution plans
Entity's contribution to retirement plans as percentage of employees' compensation	3.00%
Defined contribution plan - European and Canadian Plans | Maximum
Defined contribution plans
Entity's contribution to retirement plans as percentage of employees' compensation	15.00%

XML

Inventories

12 Months Ended

Dec. 31, 2013

Inventories

Inventories

4. Inventories

The components of inventories consisted of the following:

(in thousands)

	December 31,
	2013		2012
Raw materials	$	81,338	$	95,959
In-process products	18,475		16,878
Finished products	97,915		91,287
	$	197,728	$	204,124

XML

Property, Plant and Equipment, net

12 Months Ended

Dec. 31, 2013

Property, Plant and Equipment, net

Property, Plant and Equipment, net

5. Property, Plant and Equipment, net

Property, plant and equipment consisted of the following:

(in thousands)

	December 31,
	2013			2012
Land	$	29,347		$	32,068
Buildings and site improvements	178,391			174,187
Leasehold improvements	5,213			4,747
Machinery and equipment	225,831			214,222
	438,782			425,224
Less accumulated depreciation and amortization	(235,535		)	(217,868		)
	203,247			207,356
Capital projects in progress	6,286			6,096
	$	209,533		$	213,452

Included in property, plant and equipment at December 31, 2013 and 2012, are fully depreciated assets with an original cost of $147.9 million and $131.3 million, respectively. These fully depreciated assets are still in use in the Company’s operations.

Depreciation expense for the years ended December 31, 2013, 2012 and 2011, was $20.1 million, $19.0 million and $16.3 million, respectively.

XML

Accrued Liabilities

12 Months Ended

Dec. 31, 2013

Accrued Liabilities

Accrued Liabilities

7. Accrued Liabilities

Accrued liabilities consisted of the following:

(in thousands)

	December 31,
	2013		2012
Sales incentive and advertising accruals	$	22,195	$	17,076
Labor related liabilities	9,129		8,309
Dividend payable	6,095		6,053
Vacation liability	6,584		5,818
Other	7,742		7,667
	$	51,745	$	44,923

XML

Segment Information (Details 2) (USD $) In Thousands, unless otherwise specified	3 Months Ended								12 Months Ended
	Dec. 31, 2013	Sep. 30, 2013	Jun. 30, 2013	Mar. 31, 2013	Dec. 31, 2012	Sep. 30, 2012	Jun. 30, 2012	Mar. 31, 2012	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Net sales and long-lived assets by geographical area
Net Sales	$ 160,322	$ 195,877	$ 195,596	$ 154,535	$ 144,686	$ 172,113	$ 181,703	$ 158,734	$ 706,329	$ 657,236	$ 603,446
Long-Lived Assets	212,122				216,662				212,122	216,662	205,179
Largest customer | Net sales
Net sales and long-lived assets by geographical area
Percentage of net sales attributable to largest customer										10.00%	10.00%
Wood Construction
Net sales and long-lived assets by geographical area
Net Sales									596,849	558,113	536,131
Concrete Construction
Net sales and long-lived assets by geographical area
Net Sales									108,341	97,967	66,031
Other
Net sales and long-lived assets by geographical area
Net Sales									1,139	1,156	1,284
United States
Net sales and long-lived assets by geographical area
Net Sales									531,968	479,390	433,242
Long-Lived Assets	152,644				152,456				152,644	152,456	165,363
Canada
Net sales and long-lived assets by geographical area
Net Sales									41,626	44,359	42,350
Long-Lived Assets	5,763				6,182				5,763	6,182	5,964
Denmark
Net sales and long-lived assets by geographical area
Net Sales									14,993	15,096	17,158
Long-Lived Assets	1,907				2,252				1,907	2,252	2,607
United Kingdom
Net sales and long-lived assets by geographical area
Net Sales									21,852	23,504	23,598
Long-Lived Assets	1,249				1,232				1,249	1,232	1,370
France
Net sales and long-lived assets by geographical area
Net Sales									36,708	37,826	43,319
Long-Lived Assets	9,302				10,036				9,302	10,036	10,530
Germany
Net sales and long-lived assets by geographical area
Net Sales									26,058	27,919	27,237
Long-Lived Assets	17,446				17,651				17,446	17,651	4,957
Switzerland
Net sales and long-lived assets by geographical area
Net Sales									6,019	6,653
Long-Lived Assets	11,649				11,628				11,649	11,628
Poland
Net sales and long-lived assets by geographical area
Net Sales									5,982	4,847	3,004
Long-Lived Assets	692				795				692	795	224
The Netherlands
Net sales and long-lived assets by geographical area
Net Sales									4,306	3,336
Long-Lived Assets	63				92				63	92
Portugal
Net sales and long-lived assets by geographical area
Net Sales									804	1,437
Long-Lived Assets	688				734				688	734
Ireland
Net sales and long-lived assets by geographical area
Net Sales									31	791	2,720
Long-Lived Assets					2,757					2,757	3,075
China/Hong Kong
Net sales and long-lived assets by geographical area
Net Sales									9,802	6,054	4,754
Long-Lived Assets	9,499				9,675				9,499	9,675	10,022
Australia
Net sales and long-lived assets by geographical area
Net Sales									3,289	3,386	4,586
Long-Lived Assets	356				441				356	441	369
New Zealand
Net sales and long-lived assets by geographical area
Net Sales									1,701	1,404	188
Long-Lived Assets	125				154				125	154	138
Other countries
Net sales and long-lived assets by geographical area
Net Sales									1,190	1,234	1,290
Long-Lived Assets	$ 739				$ 577				$ 739	$ 577	$ 560

XML

Selected Quarterly Financial Data (Unaudited) (Details) (USD $) In Thousands, except Per Share data, unless otherwise specified	3 Months Ended								12 Months Ended
	Dec. 31, 2013	Sep. 30, 2013	Jun. 30, 2013	Mar. 31, 2013	Dec. 31, 2012	Sep. 30, 2012	Jun. 30, 2012	Mar. 31, 2012	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Selected Quarterly Financial Data (Unaudited)
Net sales	$ 160,322	$ 195,877	$ 195,596	$ 154,535	$ 144,686	$ 172,113	$ 181,703	$ 158,734	$ 706,329	$ 657,236	$ 603,446
Cost of sales	90,331	105,724	106,176	89,561	89,482	96,390	98,557	89,329	391,791	373,759	332,642
Gross profit	69,991	90,153	89,420	64,974	55,204	75,723	83,146	69,405	314,538	283,477	270,804
Research and development and other engineering	9,825	9,226	9,484	8,308	8,763	8,916	9,043	9,198	36,843	35,919	25,886
Selling	21,448	20,630	21,652	21,371	21,109	20,941	19,881	20,432	85,102	82,364	73,568
General and administrative	25,411	28,781	28,595	26,290	23,799	23,843	27,087	26,244	109,077	100,973	95,820
Impairment of Goodwill					2,346					2,346	1,282
Loss (gain) on sale of assets	1,404	631	11	(8)	124	33	(13)	23	2,038	166	191
Income from operations	11,903	30,885	29,678	9,013	(937)	21,990	27,148	13,508	81,478	61,709	74,057
Interest income, net	54	(9)	1	38	35	55	58	65
Income before taxes	11,957	30,876	29,679	9,051	(902)	22,045	27,206	13,573	81,564	61,921	78,786
Provision for (benefit from) income taxes	4,289	10,870	11,177	4,256	(6,785)	9,069	11,347	6,372	30,593	20,003	27,886
Net income	$ 7,668	$ 20,006	$ 18,502	$ 4,795	$ 5,883	$ 12,976	$ 15,859	$ 7,201	$ 50,971	$ 41,918	$ 50,900
Earnings per common share:
Basic (in dollars per share)	$ 0.16	$ 0.41	$ 0.38	$ 0.10	$ 0.12	$ 0.27	$ 0.33	$ 0.15	$ 1.05	$ 0.87	$ 1.04
Diluted (in dollars per share)	$ 0.16	$ 0.41	$ 0.38	$ 0.10	$ 0.12	$ 0.27	$ 0.33	$ 0.15	$ 1.05	$ 0.87	$ 1.04
Cash dividends declared per common share (in dollars per share)	$ 0.125	$ 0.125	$ 0.125		$ 0.25	$ 0.125	$ 0.125	$ 0.125	$ 0.375	$ 0.625	$ 0.50

XML

Segment Information (Details) (USD $) In Thousands, unless otherwise specified	3 Months Ended								12 Months Ended
	Dec. 31, 2013	Sep. 30, 2013	Jun. 30, 2013	Mar. 31, 2013	Dec. 31, 2012	Sep. 30, 2012	Jun. 30, 2012	Mar. 31, 2012	Dec. 31, 2013 item	Dec. 31, 2012	Dec. 31, 2011	Dec. 31, 2010
Segment Information
Number of reportable segments									3
Segment Information
Net sales	$ 160,322	$ 195,877	$ 195,596	$ 154,535	$ 144,686	$ 172,113	$ 181,703	$ 158,734	$ 706,329	$ 657,236	$ 603,446
Income (loss) from operations	11,903	30,885	29,678	9,013	(937)	21,990	27,148	13,508	81,478	61,709	74,057
Depreciation and amortization									27,518	26,857	20,751
Impairment of Goodwill					2,346					2,346	1,282
Impairment of long-lived asset									1,025	803	1,094
Significant non-cash charges									12,747	10,667	6,837
Provision for (benefit from) income taxes	4,289	10,870	11,177	4,256	(6,785)	9,069	11,347	6,372	30,593	20,003	27,886
Capital expenditures and asset acquisitions, net of cash acquired									23,297	87,086	77,916
Total assets	953,613				890,322				953,613	890,322	836,087
Cash and short-term investments	251,208				175,553				251,208	175,553	213,817	335,049
Administrative and all other
Segment Information
Lease term of entity's facilities in Vacaville									10 years
Net sales									948	949	950
Income (loss) from operations									(2,463)	1,017	(1,118)
Depreciation and amortization									1,293	1,466	1,497
Significant non-cash charges									2,177	2,051	1,278
Provision for (benefit from) income taxes									1,416	1,099	755
Capital expenditures and asset acquisitions, net of cash acquired									9		19
Total assets	93,473				82,366				93,473	82,366	86,683
Cash and short-term investments	156,000				91,900				156,000	91,900	68,500
Intersegment elimination
Segment Information
Net sales									21,421	21,272	16,739
North America
Segment Information
Net sales									572,789	522,895	474,722
Income (loss) from operations									84,885	71,586	75,350
Depreciation and amortization									17,707	16,317	13,194
Impairment of long-lived asset										461	1,094
Significant non-cash charges									8,867	7,369	4,464
Provision for (benefit from) income taxes									26,372	15,037	25,348
Capital expenditures and asset acquisitions, net of cash acquired									19,424	23,014	72,291
Total assets	627,196				583,501				627,196	583,501	540,082
North America | Intersegment elimination
Segment Information
Net sales									4,735	5,121	4,805
Europe
Segment Information
Net sales									117,799	122,549	118,246
Income (loss) from operations									1,258	(8,095)	1,296
Depreciation and amortization									7,019	7,744	4,849
Impairment of Goodwill										2,346	1,282
Impairment of long-lived asset									1,025	342
Significant non-cash charges									1,561	1,053	966
Provision for (benefit from) income taxes									2,906	3,544	2,588
Capital expenditures and asset acquisitions, net of cash acquired									2,244	63,156	5,062
Total assets	201,384				194,000				201,384	194,000	180,016
Europe | Intersegment elimination
Segment Information
Net sales									352	430	575
Asia/Pacific
Segment Information
Net sales									14,793	10,843	9,528
Income (loss) from operations									(2,202)	(2,799)	(1,471)
Depreciation and amortization									1,499	1,330	1,211
Significant non-cash charges									142	194	129
Provision for (benefit from) income taxes									(101)	323	(805)
Capital expenditures and asset acquisitions, net of cash acquired									1,620	916	544
Total assets	31,560				30,455				31,560	30,455	29,306
Asia/Pacific | Intersegment elimination
Segment Information
Net sales									16,334	15,721	11,359
Foreign operating entities
Segment Information
Cash and short-term investments	$ 96,400								$ 96,400
Percentage of cash and cash equivalents	38.40%								38.40%

XML

Commitments and Contingencies (Tables)

12 Months Ended

Dec. 31, 2013

Commitments and Contingencies

Schedule of minimum rental commitments under all non-cancelable leases

At December 31, 2013, minimum rental commitments under all non-cancelable leases were as follows:

(in thousands)

2014	$	6,671
2015	4,904
2016	3,310
2017	2,113
2018	1,301
Thereafter	10
	$	18,309

Schedule of Contractual Obligations

At December 31, 2013, other contractual obligations were as follows:

(in thousands)

			Debt
	Purchase		Interest
	Obligations		Obligations		Total
2014	$	14,775	$	450	$	15,225
2015	491		450		941
2016	42		450		492
2017	41		263		304
2018	41		—		41
Thereafter	—		—		—
	$	15,390	$	1,613	$	17,003

XML

Property, Plant and Equipment, net (Details) (USD $)	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Property, Plant and Equipment, net
Original cost of fully depreciated assets still in use	$ 147,900,000	$ 131,300,000
Depreciation expense	20,100,000	19,000,000	16,300,000
Property, Plant and Equipment
Property, plant and equipment, gross	438,782,000	425,224,000
Less accumulated depreciation and amortization	(235,535,000)	(217,868,000)
Property, plant and equipment excluding capital projects in progress, net	203,247,000	207,356,000
Capital projects in progress	6,286,000	6,096,000
Property, plant and equipment, net	209,533,000	213,452,000
Land
Property, Plant and Equipment
Property, plant and equipment, gross	29,347,000	32,068,000
Buildings and site improvements
Property, Plant and Equipment
Property, plant and equipment, gross	178,391,000	174,187,000
Leasehold improvements
Property, Plant and Equipment
Property, plant and equipment, gross	5,213,000	4,747,000
Machinery and equipment
Property, Plant and Equipment
Property, plant and equipment, gross	$ 225,831,000	$ 214,222,000

XML

Related Party Transactions

12 Months Ended

Dec. 31, 2013

Related Party Transactions

Related Party Transactions

12. Related Party Transactions

The Company paid an airplane charter company standard hourly rates when an airplane was hired for use by its Chairman and former Chief Executive Officer for travel between his home and Company offices or by him and other Company employees in travel on business. For each of the years ended December 31, 2012 and 2011, the total cost to the Company for this and other airplanes that were used was $0.5 million. Included in these amounts for the years ended December 31, 2012 and 2011, was $20 thousand and $30 thousand, respectively, paid to the Company’s Chairman and former Chief Executive Officer for compensation. The independent members of the Board unanimously approved this arrangement. The Company computed the compensation cost of the use of airplanes using the Standard Industrial Fare Level (“SIFL”) tables prescribed under applicable Internal Revenue Service regulations. Beginning in 2013, the Company no longer hires an airplane for its Chairman, but will reimburse him for the cost of his travel based on commercial flight rates to and from its offices or when he travels on Company business.

In March 2013, the Company extended its lease on a property in Addison, Illinois, which is co-owned by Gerald Hagel, a vice president of Simpson Strong-Tie since March 2007. The extension is for an additional five years through 2018. The Company paid $0.3 million in 2013 to lease the property from Mr. Hagel and his wife, Susan Hagel, a former employee of Simpson Strong-Tie.

In December 2009 and January 2010, the Company made loans of $0.7 million and $1.7 million to two entities related to Keymark. Both of these loans bore interest at an annual rate of 5.5%. The $1.7 million loan was repaid in July 2012 and the $0.7 million loan was repaid in January 2013.

In 2011, the Company paid Keymark $2.5 million for fees owed to Keymark for software development, and the Company purchased the software assets of Keymark valued at $11.5 million for $6.2 million in net cash payments and its 46.1% interest in Keymark. The Company no longer has an equity interest in Keymark or any remaining receivables from Keymark. See Note 6.

XML

SCHEDULE II VALUATION AND QUALIFYING ACCOUNTS

12 Months Ended

Dec. 31, 2013

SCHEDULE II VALUATION AND QUALIFYING ACCOUNTS

SCHEDULE II VALUATION AND QUALIFYING ACCOUNTS

SCHEDULE II

Simpson Manufacturing Co., Inc. and Subsidiaries

VALUATION AND QUALIFYING ACCOUNTS

for the years ended December 31, 2013, 2012 and 2011

Column A	Column B		Column C					Column D		Column E
			Additions
			Charged			Charged
	Balance at		to Costs			to Other				Balance
(in thousands)	Beginning		and			Accounts —				at End
Classification	of Year		Expenses			Write-offs		Deductions		of Year
Year Ended December 31, 2013
Allowance for doubtful accounts	$	1,287	$	(48	)	$	—	$	294	$	945
Allowance for sales discounts	1,632		(181		)	—		—		1,451
Allowance for deferred tax assets	9,720		1,458			—		5,632		5,546
Year Ended December 31, 2012
Allowance for doubtful accounts	991		355			—		59		1,287
Allowance for sales discounts	1,231		401			—		—		1,632
Allowance for deferred tax assets	6,279		3,600			—		159		9,720
Year Ended December 31, 2011
Allowance for doubtful accounts	1,344		67			—		420		991
Allowance for sales discounts	1,181		50			—		—		1,231
Allowance for deferred tax assets	7,167		1,082			—		1,970		6,279

XML

Trade Accounts Receivable, net (Details) (USD $) In Thousands, unless otherwise specified	Dec. 31, 2013	Dec. 31, 2012
Trade Accounts Receivable, net
Trade accounts receivable	$ 92,413	$ 85,732
Allowance for doubtful accounts	(945)	(1,288)
Allowance for sales discounts	(1,451)	(1,632)
Trade accounts receivable, net	$ 90,017	$ 82,812

XML

Operations and Summary of Significant Accounting Policies (Details 3) (USD $)	3 Months Ended								12 Months Ended			1 Months Ended		3 Months Ended	9 Months Ended	12 Months Ended
	Dec. 31, 2013	Sep. 30, 2013	Jun. 30, 2013	Mar. 31, 2013	Dec. 31, 2012	Sep. 30, 2012	Jun. 30, 2012	Mar. 31, 2012	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011	Dec. 31, 2013 Facility closing	Sep. 30, 2013 Facility closing	Mar. 31, 2013 Facility closing	Sep. 30, 2013 Facility closing	Dec. 31, 2013 Facility closing	Dec. 31, 2012 Facility closing	Dec. 31, 2013 Facility closing Maximum	Dec. 31, 2012 Facility closing Land and building
Plant Closure
Net book value of the long-lived assets, including land, building and equipment	$ 209,533,000				$ 213,452,000				$ 209,533,000	$ 213,452,000			$ 1,700,000		$ 1,700,000		$ 2,800,000		$ 2,700,000
Impairment loss on assets held and in use														1,000,000
Sales of assets									5,262,000	7,642,000	3,081,000		1,000,000
Gain (loss) on sale of assets	(1,404,000)	(631,000)	(11,000)	8,000	(124,000)	(33,000)	13,000	(23,000)	(2,038,000)	(166,000)	(191,000)		(700,000)
Net book value of remaining equipments to be sold, transferred or scrapped					593,000					593,000			100,000		100,000
Severance costs																0	3,000,000
Severance costs paid															300,000		2,400,000
Severance costs accrued																	600,000
Severance costs reversed															200,000
Severance costs to be paid in 2014																		100,000
Plant closure expenses																100,000	300,000
Plant closure expenses paid																200,000	200,000
Reclassification from accumulated other comprehensive income to consolidated statement of operations related to foreign exchange losses												$ 2,800,000

XML

Consolidated Statements of Comprehensive Income (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Consolidated Statements of Comprehensive Income
Net Income	$ 50,971	$ 41,918	$ 50,900
Other comprehensive income:
Translation adjustment, net of tax benefit (expense) of $29, $33 and ($1) for 2013, 2012 and 2011, respectively	5,941	5,559	(7,844)
Unamortized pension adjustments, net of tax benefit of ($3) and $46 for 2013 and 2012, respectively	46	(243)
Comprehensive income	$ 56,958	$ 47,234	$ 43,056

XML

Operations and Summary of Significant Accounting Policies

12 Months Ended

Dec. 31, 2013

Operations and Summary of Significant Accounting Policies

Operations and Summary of Significant Accounting Policies

1. Operations and Summary of Significant Accounting Policies

Nature of Operations

Simpson Manufacturing Co., Inc., through its subsidiary Simpson Strong-Tie Company Inc. (“Simpson Strong-Tie”) and its other subsidiaries (collectively, the “Company”), designs, engineers and is a leading manufacturer of wood construction products, including connectors, truss plates, fastening systems, fasteners and shearwalls, and concrete construction products, including adhesives, specialty chemicals, mechanical anchors, powder actuated tools and fiber reinforcing materials. The Company markets its products to the residential construction, industrial, commercial and infrastructure construction, remodeling and do-it-yourself markets.

The Company operates exclusively in the building products industry. The Company’s products are sold primarily in the United States, Canada, Europe, Asia and the South Pacific. Revenues have some geographic market concentration on the west coast of the United States. A portion of the Company’s business is therefore dependent on economic activity within this region and market. The Company is dependent on the availability of steel, its primary raw material.

Principles of Consolidation

The consolidated financial statements include the accounts of Simpson Manufacturing Co., Inc. and its subsidiaries. Investments in 50% or less owned entities are accounted for using either cost or the equity method. The Company consolidates all variable interest entities (VIEs) where it is the primary beneficiary. There were no VIEs as of December 31, 2013 or 2012. All significant intercompany transactions have been eliminated.

Use of Estimates

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Revenue Recognition

The Company recognizes revenue when the earnings process is complete, net of applicable provision for discounts, returns and incentives, whether actual or estimated based on the Company’s experience. This generally occurs when products are shipped to the customer in accordance with the sales agreement or purchase order, ownership and risk of loss pass to the customer, collectability is reasonably assured and pricing is fixed or determinable. The Company’s general shipping terms are F.O.B. shipping point, where title is transferred and revenue is recognized when the products are shipped to customers. When the Company sells F.O.B. destination point, title is transferred and the Company recognizes revenue on delivery or customer acceptance, depending on terms of the sales agreement. Service sales, representing after-market repair and maintenance, engineering activities, software license sales and service and lease income, though significantly less than 1% of net sales and not material to the consolidated financial statements, are recognized as the services are completed or the software products and services are delivered. If actual costs of sales returns, incentives and discounts were to significantly exceed the recorded estimated allowances, the Company’s sales would be adversely affected.

Reclassification

The Company reclassified $0.7 million from the 2011 write down of excess and obsolete inventory to changes in inventories, net of effect of acquisitions and dispositions, in the Consolidated Statements of Cash Flows.

Cash Equivalents

The Company considers all highly liquid investments with an original or remaining maturity of three months or less at the time of purchase to be cash equivalents.

Investments

In 2011, the Company disposed of its only minority investment. Minority investments are carried either at cost or by the equity method of accounting, depending on the Company’s ownership interest and its ability to influence the operating or financial decisions of the investee, and are classified as long-term investments.

The Company periodically reviews its investments for impairment. If the carrying value of an investment exceeds its fair value and the decline in fair value is determined to be other-than-temporary, the Company writes down the value of the investment to its fair value.

Allowance for Doubtful Accounts

The Company assesses the collectability of specific customer accounts that would be considered doubtful based on the customer’s financial condition, payment history, credit rating and other factors that the Company considers relevant, or accounts that the Company assigns for collection. The Company reserves for the portion of those outstanding balances that the Company believes it is not likely to collect based on historical collection experience. The Company also reserves 100% of the amounts that it deems uncollectable due to a customer’s deteriorating financial condition or bankruptcy. If the financial condition of the Company’s customers were to deteriorate, resulting in probable inability to make payments, additional allowances may be required.

Inventory Valuation

Inventories are stated at the lower of cost or net realizable value (market). Cost includes all costs incurred in bringing each product to its present location and condition, as follows:

· Raw materials and purchased finished goods for resale — principally valued at cost determined on a weighted average basis; and

· In-process products and finished goods — cost of direct materials and labor plus attributable overhead based on a normal level of activity.

The Company applies net realizable value and obsolescence to the gross value of the inventory. The Company estimates net realizable value based on estimated selling price less further costs to completion and disposal. The Company impairs slow-moving products by comparing inventories on hand to projected demand. If on-hand supply of a product exceeds projected demand or if the Company believes the product is no longer marketable, the product is considered obsolete inventory. The Company revalues obsolete inventory to its net realizable value. The Company has consistently applied this methodology. The Company believes that this approach is prudent and makes suitable impairments for slow-moving and obsolete inventory. When impairments are established, a new cost basis of the inventory is created. Unexpected change in market demand, building codes or buyer preferences could reduce the rate of inventory turnover and require the Company to recognize more obsolete inventory.

Sales Incentive and Advertising Allowances

The Company records estimated reductions to revenues for sales incentives, primarily rebates for volume discounts, and allowances for co-operative advertising.

Allowances for Sales Discounts

The Company records estimated reductions to revenues for discounts taken on early payment of invoices by its customers.

Warranties

The Company provides product warranties for specific product lines and accrues for estimated future warranty costs, none of which has been material to the consolidated financial statements, in the period in which the sale is recorded. In a limited number of circumstances, the Company may also agree to indemnify customers against legal claims made against those customers by the end users of the Company’s products. Historically, payments made by the Company, if any, under such agreements have not had a material effect on the Company’s consolidated results of operations, cash flows or financial position.

Fair Value of Financial Instruments

The “Fair Value Measurements and Disclosures” topic of the Financial Accounting Standards Board (“FASB”) Accounting Standards CodificationTM (“ASC”) establishes a valuation hierarchy for disclosure of the inputs used to measure fair value. This hierarchy prioritizes the inputs into three broad levels as follows: Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities; Level 2 inputs are quoted prices for similar assets and liabilities in active markets or inputs that are observable for the asset or liability, either directly or indirectly through market corroboration, for substantially the full term of the financial instrument; Level 3 inputs are unobservable inputs based on the Company’s assumptions used to measure assets and liabilities at fair value. A financial asset’s or liability’s classification within the hierarchy is determined based on the lowest level input that is significant to the fair value measurement.

As of December 31, 2013, the Company’s investments consisted of only United States Treasury securities and money market funds, which are the Company’s primary financial instruments, maintained in cash equivalents and carried at cost, approximating fair value, based on Level 1 inputs. The balance of the Company’s primary financial instruments was as follows:

(in thousands)

At December 31,
2013		2012
$	117,571	$	76,130

The carrying amounts of trade accounts receivable, accounts payable and accrued liabilities approximate fair value due to the short-term nature of these instruments. The fair value of the Company’s line of credit is classified as Level 2 within the fair value hierarchy and is calculated based on borrowings with similar maturities, current remaining average life to maturity and current market conditions.

Property, Plant and Equipment

Property, plant and equipment are carried at cost. Major renewals and betterments are capitalized. Maintenance and repairs are expensed on a current basis. When assets are sold or retired, their costs and accumulated depreciation are removed from the accounts, and the resulting gains or losses are reflected in the consolidated statements of operations.

The “Intangibles—Goodwill and Other” topic of the FASB ASC provides guidance on capitalization of the costs incurred for computer software developed or obtained for internal use. The Company capitalizes substantially all external costs and qualifying internal costs related to the purchase and implementation of software projects used for business operations and engineering design activities. Capitalized software costs primarily include purchased software and external consulting fees. Capitalized software projects are amortized over the estimated useful lives of the software.

Depreciation and Amortization

Depreciation of software, machinery and equipment is provided using accelerated methods over the following estimated useful lives:

Software	3 to 5 years
Machinery and equipment	3 to 10 years

Buildings and site improvements are depreciated using the straight-line method over their estimated useful lives, which range from 15 to 45 years. Leasehold improvements are amortized using the straight-line method over the shorter of the expected life or the remaining term of the lease. Amortization of purchased intangible assets with finite useful lives is computed using the straight-line method over the estimated useful lives of the assets.

In-Process Research and Development Assets

In-process research and development (“IPR&D”) assets represent capitalized incomplete research projects that the Company acquired through business combinations. Such assets are initially measured at their acquisition-date fair values and are required to be classified as indefinite-lived assets until the successful completion of the associated research and development efforts. During the development period after the date of acquisition, these assets will not be amortized until the research and development projects are completed and the resulting assets are ready for their intended use. The Company performs an impairment test annually and more frequently if events or changes in circumstances indicate it that is more likely than not that the asset is impaired. On successful completion of the research and development project the Company makes a determination about the then-remaining useful life and begins amortization.

In connection with the 2012 S&P Clever acquisition, the Company recorded $4.8 million of in-process research and development assets, which were classified as indefinite-lived intangibles assets.

Cost of Sales

The types of costs included in cost of sales include material, labor, factory and tooling overhead, shipping, and freight costs. Major components of these expenses are material costs, such as steel, packaging and cartons, personnel costs, and facility costs, such as rent, depreciation and utilities, related to the production and distribution of the Company’s products. Inbound freight charges, purchasing and receiving costs, inspection costs, warehousing costs, internal transfer costs, and other costs of the Company’s distribution network are also included in cost of sales.

Tool and Die Costs

Tool and die costs are included in product costs in the year incurred.

Shipping and Handling Fees and Costs

The Company’s general shipping terms are F.O.B. shipping point. Shipping and handling fees and costs are included in revenues and product costs, as appropriate, in the year incurred.

Product and Software Research and Development Costs

Product research and development costs, which are included in operating expenses and are charged against income as incurred, were $10.7 million, $11.5 million and $6.1 million in 2013, 2012 and 2011, respectively. The types of costs included as product research and development expenses are typically related to salaries and benefits, professional fees and supplies. In 2013 and 2012, the Company incurred software development expenses related to its expansion into the plated truss market. The Company amortizes acquired patents over their remaining lives and performs periodic reviews for impairment. The cost of internally developed patents is expensed as incurred.

Selling Costs

Selling costs include expenses associated with selling, merchandising and marketing the Company’s products. Major components of these expenses are personnel, sales commissions, facility costs such as rent, depreciation and utilities, professional services, information technology costs, sales promotion, advertising, literature and trade shows.

Advertising Costs

Advertising costs are included in selling expenses, are expensed when the advertising occurs, and were $7.0 million, $7.2 million and $6.3 million in 2013, 2012 and 2011, respectively.

General and Administrative Costs

General and administrative costs include personnel, information technology related costs, facility costs such as rent, depreciation and utilities, professional services, amortization of intangibles and bad debt charges.

Income Taxes

Income taxes are calculated using an asset and liability approach. The provision for income taxes includes federal, state and foreign taxes currently payable and deferred taxes, due to temporary differences between the financial statement and tax bases of assets and liabilities. In addition, future tax benefits are recognized to the extent that realization of such benefits is more likely than not.

Sales Taxes

The Company presents taxes collected and remitted to governmental authorities on a net basis in the accompanying consolidated statements of operations.

Foreign Currency Translation

The local currency is the functional currency of the Company’s operations in Europe, Canada, Asia, Australia, New Zealand and South Africa. Assets and liabilities denominated in foreign currencies are translated using the exchange rate on the balance sheet date. Revenues and expenses are translated using average exchange rates prevailing during the year. The translation adjustment resulting from this process is shown separately as a component of stockholders’ equity. Foreign currency transaction gains or losses are included in general and administrative expenses.

Plant Closure

In September 2012, the Company decided to discontinue manufacturing heavy-duty mechanical anchors made in its facility in Ireland, which were sold mainly in Europe, to focus on selling light-duty and medium-duty anchors and its fastener products in conjunction with its connector products. In December 2012, the Company ceased producing and selling heavy-duty mechanical anchors and terminated employees in Europe, primarily in Ireland and Germany, who were manufacturing, selling or supporting the product line. In the third quarter of 2013, the Company concluded remaining activities associated with the terminated product line, including transferring remaining inventories and certain fixed assets to its other operating locations and preparing the site for lease. All costs associated with the closure were reported in the Europe segment.

At December 31, 2012, the long-lived assets of the Ireland facility had a net book value of $2.8 million, including land and building with a net book value of $2.7 million. In the first quarter of 2013, the Company concluded that the carrying value of its Ireland facility, associated with the Europe segment, exceeded its net estimated realizable value, and therefore recorded an impairment charge of $1.0 million, within general and administrative expenses. The net realizable value was based on the Company’s intent to lease the facility. In September 2013, after receiving an offer that exceeded expectations, the Company reconsidered leasing the facility and decided to accept the offer. The facility had a remaining net book value of $1.7 million and was sold for $1.0 million, resulting in a $0.7 million loss on sales of assets. Remaining equipment with a net book value of $0.1 million was sold to outside parties, transferred to other branches within the Company or scrapped. See note 5.

In 2012, the Company recorded employee severance obligations of $3.0 million, of which $2.4 million was paid in 2012, and $0.6 million was accrued at December 31, 2012. In the first nine months of 2013, severance payments of $0.3 million were made and severance charges of $0.2 million were reversed due to a court decision requiring the Company to retain an employee until 2014. No additional severance obligations were recorded in 2013. The remaining balance, of less than $0.1 million to be paid in 2014, represents the statutory and discretionary amounts due to employees that were or will be involuntarily terminated. The Company does not expect to record additional severance expense in 2014.

Closure liabilities are recognized when a transaction or event has occurred that leaves little or no discretion to avoid future settlement of the liability. As of December 31, 2012, the Company had recorded $0.3 million in plant closure expenses, of which $0.2 million was paid in 2012 and $0.1 million was paid in 2013. In 2013, the Company had recorded an additional $0.1 million in plant closure costs and paid $0.2 million in accrued plant closure costs.

In December 2013, the Company had substantially completed the liquidation of its Irish subsidiary, which included liquidating nearly all of its assets and settling most of its debts. As a result, the Company reclassified $2.8 million of its accumulated other comprehensive income, related to foreign exchange losses from its Irish subsidiary, to its consolidated statement of operations. This amount is classified as a loss on disposal of assets and was recorded in the Administrative & All Other segment.

Sale of Product Line

In December 2013, the Company sold its CarbonWrap product line to The DowAksa USA, LLC for $3.8 million. The CarbonWrap product line had assets of $2.0 million, consisting of $1.5 million in intangible assets and $0.5 million in goodwill. As part of the transaction, the Company also incurred severance costs of $0.5 million. As a result of this transaction the Company recognized a pre-tax gain of $1.4 million.

Because the CarbonWrap assets constituted an integrated business in the US reporting unit, a portion of the US reporting unit’s goodwill must be included in the carrying amount of the asset group disposed. The amount of goodwill from the US reporting unit included in the CarbonWrap asset group was $0.5 million, which was proportionate to the fair value of the CarbonWrap asset group compared to the estimated fair value of the US reporting unit.

The Company continues to invest in related product lines, such as those acquired from Fox Industries, Inc. in 2011 and S&P Clever in 2012. See note 2.

Common Stock

Subject to the rights of holders of any preferred stock that may be issued in the future, holders of common stock are entitled to receive such dividends, if any, as may be declared from time to time by the Company’s Board of Directors (the “Board”) out of legally available funds, and in the event of liquidation, dissolution or winding-up of the Company, to share ratably in all assets available for distribution. The holders of common stock have no preemptive or conversion rights. Subject to the rights of any preferred stock that may be issued in the future, the holders of common stock are entitled to one vote per share on any matter submitted to a vote of the stockholders, except that, subject to compliance with pre-meeting notice and other conditions pursuant to the Company’s Bylaws, stockholders may cumulate their votes in an election of directors, and each stockholder may give one candidate a number of votes equal to the number of directors to be elected multiplied by the number of shares held by such stockholder or may distribute such stockholder’s votes on the same principle among as many candidates as such stockholder thinks fit. A director is elected if the votes cast “for” such director’s election exceed the votes cast “against” such director’s election, except that, if a stockholder properly nominates a candidate for election to the Board, the candidates with the highest number of affirmative votes (up to the number of directors to be elected) are elected. There are no redemption or sinking fund provisions applicable to the common stock.

In 1999, the Company declared a dividend distribution of one Right to purchase Series A Participating preferred stock per share of common stock. The Rights will be exercisable, unless redeemed earlier by the Company, if a person or group acquires, or obtains the right to acquire, 15% or more of the outstanding shares of common stock or commences a tender or exchange offer that would result in it acquiring 15% or more of the outstanding shares of common stock, either event occurring without the prior consent of the Company. The amount of Series A Participating preferred stock that the holder of a Right is entitled to receive and the purchase price payable on exercise of a Right are both subject to adjustment. Any person or group that acquires 15% or more of the outstanding shares of common stock without the prior consent of the Company would not be entitled to this purchase. Any stockholder who held 25% or more of the Company’s common stock when the Rights were originally distributed would not be treated as having acquired 15% or more of the outstanding shares unless such stockholder’s ownership is increased to more than 40% of the outstanding shares.

The Rights will expire on June 14, 2019, or they may be redeemed by the Company at one cent per Right prior to that date. The Rights do not have voting or dividend rights and, until they become exercisable, have no dilutive effect on the earnings of the Company. One million shares of the Company’s preferred stock have been designated Series A Participating preferred stock and reserved for issuance on exercise of the Rights. No event during 2013 made the Rights exercisable.

Preferred Stock

The Board has the authority to issue the authorized and unissued preferred stock in one or more series with such designations, rights and preferences as may be determined from time to time by the Board. Accordingly, the Board is empowered, without stockholder approval, to issue preferred stock with dividend, redemption, liquidation, conversion, voting or other rights that could adversely affect the voting power or other rights of the holders of the Company’s common stock.

Net Income per Common Share

Basic net income per common share is computed based on the weighted average number of common shares outstanding. Potentially dilutive shares, using the treasury stock method, are included in the diluted per-share calculations for all periods when the effect of their inclusion is dilutive.

The following shows a reconciliation of basic earnings per share (“EPS”) to diluted EPS:

(in thousands, except per-share amounts)

	Year Ended December 31,
	2013		2012		2011
Net income available to common stockholders	$	50,971	$	41,918	$	50,900
Basic weighted average shares outstanding	48,521		48,339		48,974
Dilutive effect of potential common stock equivalents — stock options	152		73		49
Diluted weighted average shares outstanding	48,673		48,412		49,023
Net earnings per share:
Basic	$	1.05	$	0.87	$	1.04
Diluted	$	1.05	$	0.87	$	1.04
Potentially dilutive securities excluded from earnings per diluted share because their effect is anti-dilutive	—		1,700		1,363

Anti-dilutive shares attributable to outstanding stock options were excluded from the calculation of diluted net income per share.

The potential tax benefits derived from the amount of the average stock price for the period in excess of the grant date fair value of stock options, known as the windfall tax benefit, is added to the proceeds of stock option exercises under the treasury stock method for computing the amount of dilutive securities used to determine the outstanding shares for the calculation of diluted earnings per share.

Comprehensive Income

Comprehensive income is defined as net income plus other comprehensive income. Other comprehensive income consists of changes in cumulative translation adjustments and changes in unamortized pension adjustments recorded directly in accumulated other comprehensive income within stockholders’ equity. The following shows the components of accumulated other comprehensive income as of December 31, 2013 and 2012:

(in thousands)

	December 31,
	2013			2012
Translation adjustments, net of tax of $854 and $883 as of 2013 and 2012, respectively	$	18,283		$	12,342
Unamortized pension adjustments, net of tax of $43 and $46 as of 2013 and 2012, respectively	(197		)	(243		)
Total accumulated other comprehensive income	$	18,086		$	12,099

The 2013 translation adjustments activity included the realization of $2.8 million in cumulative currency translation adjustments related to the liquidation of the Irish subsidiary as a net loss on disposal of assets in the Consolidated Statements of Operations.

Concentration of Credit Risk

Financial instruments that potentially subject the Company to concentrations of credit risk consist of cash in banks, short-term investments in United States Treasury securities, money market funds and trade accounts receivable. The Company maintains its cash in demand deposit and money market accounts held primarily at eleven banks.

Accounting for Stock-Based Compensation

With the approval of the Company’s stockholders on April 26, 2011, the Company adopted the Simpson Manufacturing Co., Inc. 2011 Incentive Plan (the “2011 Plan”). The 2011 Plan amended and restated in their entirety, and incorporated and superseded, both the Simpson Manufacturing Co., Inc. 1994 Stock Option Plan (the “1994 Plan”), which was principally for the Company’s employees, and the Simpson Manufacturing Co., Inc. 1995 Independent Director Stock Option Plan (the “1995 Plan”), which was for its independent directors. Options previously granted under the 1994 Plan or the 1995 Plan will not be affected by the adoption of the 2011 Plan and will continue to be governed by the 1994 Plan or the 1995 Plan, respectively.

Under the 1994 Plan, the Company could grant incentive stock options and non-qualified stock options, although the Company granted only non-qualified stock options under the 1994 Plan and the 1995 Plan. The Company generally granted options under each of the 1994 Plan and the 1995 Plan once each year. The exercise price per share of each stock option granted in February 2011 under the 1994 Plan equaled the closing market price per share of the Company’s common stock as reported by the New York Stock Exchange on the day preceding the day that the Compensation and Leadership Development Committee of the Company’s Board of Directors met to approve the grant of the options. The exercise price per share under each option granted under the 1995 Plan was at the fair market value on the date specified in the 1995 Plan. Options vest and expire according to terms established at the grant date. Options granted under the 1994 Plan typically vest evenly over the requisite service period of four years and have a term of seven years. The vesting of options granted under the 1994 Plan will be accelerated if the grantee ceases to be employed by the Company after reaching age 60 or if there is a change in control of the Company. Options granted under the 1995 Plan were fully vested on the date of grant. Shares of common stock issued on exercise of stock options under the 1994 Plan and the 1995 Plan are registered under the Securities Act of 1933.

Under the 2011 Plan, the Company may grant incentive stock options, non-qualified stock options, restricted stock and restricted stock units, although the Company currently intends to award primarily restricted stock units and to a lesser extent, if at all, non-qualified stock options. The Company does not currently intend to award incentive stock options or restricted stock. Under the 2011 Plan, no more than 16.3 million shares of the Company’s common stock may be issued (including shares already sold) pursuant to all awards under the 2011 Plan, including on exercise of options previously granted under the 1994 Plan and the 1995 Plan. Shares of common stock to be issued pursuant to the 2011 Plan are registered under the Securities Act of 1933.

The following table shows the Company’s stock-based compensation activity for the years ended December 31, 2013, 2012 and 2011:

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Stock-based compensation expense recognized in operating expenses	$	12,053		$	10,205		$	6,133
Tax benefit of stock-based compensation expense in provision for income taxes	4,225			3,610			2,261
Stock-based compensation expense, net of tax	$	7,828		$	6,595		$	3,872
Fair value of shares vested	$	12,090		$	10,195		$	6,194
Proceeds to the Company from the exercise of stock-based compensation	$	15,057		$	4,925		$	214
Tax benefit from exercise of stock-based compensation, including shortfall tax benefits	$	(2,645	)	$	(233	)	$	(1,554	)

(in thousands)

	At December 31,
	2013		2012		2011
Stock-based compensation cost capitalized in inventory	$	374	$	335	$	345

The stock-based compensation expense included in cost of sales, research and development and engineering expense, selling expense, or general and administrative expense depends on the job functions performed by the employees to whom the stock options were granted, or the restricted stock units were awarded.

The assumptions used to calculate the fair value of options or restricted stock units are evaluated and revised, as necessary, to reflect market conditions and the Company’s experience.

Goodwill Impairment Testing

The Company tests goodwill for impairment at the reporting unit level on an annual basis (in the fourth quarter for the Company). The Company also reviews goodwill for impairment whenever events or changes in circumstances indicate the carrying value of an asset may not be recoverable. These events or circumstances could include a significant change in the business climate, legal factors, operating performance indicators, competition, or disposition or relocation of a significant portion of a reporting unit.

The reporting unit level is generally one level below the operating segment and is at the country level except in the United States and Australia and except for S&P Clever Reinforcement Company AG and S&P Clever International AG, both companies incorporated under the laws of Switzerland (collectively, “S&P Clever”).

The Company has determined that the United States reporting unit includes four components: Northwest United States, Southwest United States, Northeast United States and Southeast United States (collectively the “U.S. Components”). The Company aggregates the U.S. Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the U.S. Components working in concert. The U.S. Components are economically similar because of a number of factors, including, selling similar products to shared customers and sharing assets and services such as intellectual property, manufacturing assets for certain products, research and development projects, manufacturing processes, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the U.S. Components level and costs are allocated among the four U.S. Components.

The Company determined that the Australia reporting unit includes three components: Australia, New Zealand and South Africa (collectively the “AU Components”). The Company aggregates the AU Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the AU Components working in concert. The AU Components are economically similar because of a number of factors, including that New Zealand and South Africa operate as extensions of their Australian parent company selling similar products and sharing assets and services such as intellectual property, manufacturing assets for certain products, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the AU Components level and costs are allocated among the AU Components.

The Company has determined that the S&P Clever reporting unit includes seven components: S&P Switzerland, S&P Poland, S&P Austria, S&P The Netherlands, S&P Portugal, S&P Germany and S&P France (collectively the S&P Components”). The Company aggregates the S&P Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the S&P Components working in concert. The S&P Components are economically similar because of a number of factors, including sharing assets and services such as intellectual property, manufacturing assets for certain products, research and development projects, manufacturing processes, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the S&P Components level and costs are allocated among the S&P Components.

The Company determined that the Denmark reporting unit includes two components: Denmark and Poland (collectively the “DK Components”). The Company aggregates the DK Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the DK Components working in concert. The DK Components are economically similar because of a number of factors, including that Poland sells similar products and shares assets, such as intellectual property, manufacturing assets for certain products and management of inventory excesses and shortages.

For certain reporting units, the Company may first assess qualitative factors related to the goodwill of the reporting unit to determine whether it is necessary to perform a two-step impairment test. If the Company judges that it is more likely than not that the fair value of the reporting unit is greater than the carrying amount of the reporting unit, including goodwill, no further testing is required. If the Company judges that it is more likely than not that the fair value of the reporting unit is less than the carrying amount of the reporting unit, including goodwill, the Company will perform a two-step impairment test on goodwill. In the first step, the Company compares the fair value of the reporting unit to its carrying value. The fair value calculation uses a discounted cash flow model and may be supplemented by market approaches if information is readily available. If the Company judges that the carrying value of the net assets assigned to the reporting unit, including goodwill, exceeds the fair value of the reporting unit, a second step of the impairment test must be performed to determine the implied fair value of the reporting unit’s goodwill. If the Company judges that the carrying value of a reporting unit’s goodwill exceeds its implied fair value, the Company would record an impairment charge equal to the difference between the implied fair value of the goodwill and the carrying value.

Determining the fair value of a reporting unit or an indefinite-lived purchased intangible asset is a judgment involving significant estimates and assumptions. These estimates and assumptions include revenue growth rates, operating margins and working capital requirements used to calculate projected future cash flows, risk-adjusted discount rates, and future economic and market conditions (Level 3 fair value inputs). The Company bases its fair value estimates on assumptions that it believes to be reasonable, but that are unpredictable and inherently uncertain. Actual future results may differ from those estimates.

Assumptions about a reporting unit’s operating performance in the first year of the discounted cash flow model used to determine whether or not the goodwill related to that reporting unit is impaired are derived from the Company’s budget. The fair value model considers such factors as macro-economic conditions, revenue and expense forecasts, product line changes, material, labor and overhead costs, tax rates, working capital levels and competitive environment. Future estimates, however derived, are inherently uncertain but the Company believes that this is the most appropriate source on which to base its estimates.

The Company uses these parameters only to provide a basis for the determination of whether or not the goodwill related to a reporting unit is impaired. No inference whatsoever should be drawn from these parameters about the Company’s future financial performance and they should not be taken as projections or guidance of any kind.

The impairment charge taken in 2012 resulting from the Company’s annual impairment test in the fourth quarter of 2012 was associated with assets in the Germany reporting unit that were acquired in the years 2002 and 2008. The Germany reporting unit’s carrying value, including goodwill, exceeded the fair value, primarily due to reduced future expected net cash flows from weakening profit margins due to European economic conditions, specifically in Germany. The goodwill associated with the Germany reporting unit was fully impaired. The Company’s 2011 annual goodwill impairment analysis resulted in impairment charges associated with the U.K. reporting unit.

The Company’s S&P Clever reporting unit passed step one of the annual 2013 impairment test by a 9% margin indicating an estimated value greater than its net book value. The S&P Clever reporting unit is sensitive to management’s plans for increasing sales, margins and cash flows by expanding its sales into France, other European countries and selling into the Company’s Asia/Pacific segment, as well as the release of new products. The S&P Clever reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the S&P Clever reporting unit’s goodwill, which was $19.0 million at December 31, 2013.

The Company’s France reporting unit passed step one of the annual 2013 impairment test by a 10% margin. The France reporting unit is highly sensitive to management’s plans for increasing sales at or slightly above inflation in a recovering European economy, while maintaining operating margins and increasing cash flows. The France reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the France reporting unit’s goodwill, which was $14.9 million at December 31, 2013.

The Company’s Australia reporting unit passed step one of the annual 2013 impairment test by a 4% margin. The Australia reporting unit is highly sensitive to management’s plans for increasing sales, margins and cash flows by expanding activities in Australia, New Zealand and South Africa. The Australia reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the Australia reporting unit’s goodwill, which was $1.7 million at December 31, 2013.

Key Assumptions Used in the Annual Goodwill Impairment Testing

Key assumptions used in the annual goodwill impairment test (“Step 1”) using discounted cash flow models for the Company’s reporting units included compound annual growth rates (“CAGR”) and average annual pre-tax operating margins during the forecast period, and discount rates. Sensitivity assessment of key assumptions for the reporting unit annual impairment tests are presented in the table below for reporting units that passed Step 1 with a margin of 10% or less. The margin by which the reporting units passed the annual goodwill impairment test is noted in the table below.

							Pre-Tax
	Step 1		Discount				Operating
	Pass		Rate (1)		CAGR (2)		Margin (3)
	Margin		Increases		Decreases		Decreases
S&P Clever	9	%	7	%	6	%	10	%
France	10	%	13	%	19	%	15	%
Australia	4	%	2	%	2	%	6	%

(1) Hypothetical percentage increases noted in the discount rates, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values, and thus it would not result in the reporting unit failing Step 1 of the goodwill impairment test.

(2) Hypothetical percentage decreases noted in the CAGR, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values.

(3) Hypothetical annual average percentage decreases noted in average annual pre-tax operating margins, holding all other assumptions constant, would not have decreased the fair value of the reporting units below their carrying values.

The changes in the carrying amount of goodwill, by segment, as of December 31, 2012 and 2013, were as follows:

(in thousands)

	North						Asia
	America			Europe			Pacific			Total
Balance as of January 1, 2012:
Goodwill	$	84,567		$	34,538		$	1,948		$	121,053
Accumulated impairment losses	(10,666		)	(10,538		)	—			(21,204		)
	73,901			24,000			1,948			99,849
Goodwill acquired	3,581			19,245			—			22,826
Foreign exchange	101			364			31			496
Impairment	—			(2,346		)	—			(2,346		)
Reclassifications (1)	1,156			—			—			1,156
Balance as of December 31, 2012:
Goodwill	89,405			54,147			1,979			145,531
Accumulated impairment losses	(10,666		)	(12,884		)	—			(23,550		)
	78,739			41,263			1,979			121,981
Goodwill acquired	918			674			—			1,592
Goodwill disposed	(480		)	—			—			(480		)
Foreign exchange	(248		)	1,393			(273		)	872
Impairment	—			—			—			—
Reclassifications (2)	5,893			(640		)	—			5,253
Balance as of December 31, 2013:
Goodwill	95,488			55,574			1,706			152,768
Accumulated impairment losses	(10,666		)	(12,884		)	—			(23,550		)
	$	84,822		$	42,690		$	1,706		$	129,218

(1)(2) See footnotes following table entitled Indefinite-Lived Intangibles, below.

Amortizable Intangible Assets

The total gross carrying amount and accumulated amortization of intangible assets, most of which are or will be, subject to amortization at December 31, 2013, were $67.7 million and $26.0 million, respectively. The aggregate amount of amortization expense of intangible assets for the years ended December 31, 2013, 2012 and 2011 was $7.1 million, $7.8 million and $4.3 million, respectively.

The changes in the carrying amounts of patents, unpatented technologies and non-compete agreements and other intangible assets subject to amortization as of December 31, 2012 and 2013, were as follows:

(in thousands)

	Gross					Net
	Carrying		Accumulated			Carrying
Patents	Amount		Amortization			Amount
Balance at January 1, 2012	$	6,681	$	(4,767	)	$	1,914
Amortization	—		(610		)	(610		)
Foreign exchange	3		—			3
Balance at December 31, 2012	6,684		(5,377		)	1,307
Amortization	—		(611		)	(611		)
Foreign exchange	5		—			5
Balance at December 31, 2013	$	6,689	$	(5,988	)	$	701

	Gross						Net
	Carrying			Accumulated			Carrying
Unpatented Technology	Amount			Amortization			Amount
Balance at January 1, 2012	$	4,129		$	(1,395	)	$	2,734
Amortization	—			(622		)	(622		)
Foreign exchange	32			—			32
Reclassifications (3)	1,200			—			1,200
Balance at December 31, 2012	5,361			(2,017		)	3,344
Disposals	(1,530		)	158			(1,372		)
Amortization	—			(3,398		)	(3,398		)
Foreign exchange	799			—			799
Reclassifications (4)	14,347			—			14,347
Balance at December 31, 2013	$	18,977		$	(5,257	)	$	13,720

	Gross						Net
Non-Compete Agreements,	Carrying			Accumulated			Carrying
Trademarks and Other	Amount			Amortization			Amount
Balance at January 1, 2012	$	16,276		(5,361		)	10,915
Acquisition	32,355			—			32,355
Disposal	(2,212		)	1,628			(584		)
Amortization	—			(4,309		)	(4,309		)
Foreign exchange	(2		)	—			(2		)
Reclassifications (1)(3)(5)	(4,426		)	—			(4,426		)
Removal of fully amortized asset	(5,040		)	5,040			—
Balance at December 31, 2012	36,951			(3,002		)	33,949
Acquisition	4,130			—			4,130
Disposal	(200		)	74			(126		)
Amortization	—			(636		)	(636		)
Foreign exchange	(728		)	—			(728		)
Reclassifications (2)(4)(6)(7)	(26,588		)	—			(26,588		)
Removal of fully amortized asset	(10		)	10			—
Balance at December 31, 2013	$	13,555		$	(3,554	)	$	10,001

	Gross					Net
	Carrying		Accumulated			Carrying
Customer Relationships	Amount		Amortization			Amount
Balance at January 1, 2012	$	18,940	(6,647		)	12,293
Amortization	—		(2,052		)	(2,052		)
Foreign exchange	57		—			57
Reclassifications (5)	1,700		—			1,700
Balance at December 31, 2012	20,697		(8,699		)	11,998
Amortization	—		(2,465		)	(2,465		)
Foreign exchange	229		—			229
Reclassifications (6)	1,923		—			1,923
Balance at December 31, 2013	$	22,849	$	(11,164	)	$	11,685

(1)(2)(3)(4)(5)(6)(7) See footnotes following table entitled Indefinite-Lived Intangibles, below.

At December 31, 2013, estimated future amortization of intangible assets was as follows:

(in thousands)

2014	$	7,078
2015	6,162
2016	5,905
2017	3,953
2018	3,059
Thereafter	9,950
	$	36,107

Indefinite-Lived Intangible Assets

As of December 31, 2013, two unrelated IPR&D assets totaled $5.1 million and were included in the Company’s Consolidated Balance Sheets as intangible assets. One IPR&D asset was valued at $3.4 million and has been substantially completed, with the Company anticipating sales in early 2014. The other IPR&D asset of $1.7 million requires further field testing and the Company anticipates substantial completion in 2015. The Company’s asset impairment assessment of these two IPR&D assets did not result in impairment in 2013.

The changes in the carrying amounts of indefinite-lived trade name and IPR&D assets not subject to amortization as of December 31, 2013, were as follows:

					Net
					Carrying
Indefinite-Lived Intangibles	Trade Name		IPR&D		Amount
Balance at December 31, 2012	$	—	$	—	$	—
Reclassifications (7)	616		4,742		5,358
Foreign exchange	—		308		308
Balance at December 31, 2013	$	616	$	5,050	$	5,666

(1) Reclassifications in 2012 related to finalizing accounting for acquisitions, including a $1.7 million increase to goodwill with a corresponding decrease in non-compete agreements, trademarks and other related to the Automatic Stamping acquisition, partly offset by $0.5 million decrease to goodwill with a corresponding increase in other noncurrent assets non-compete agreements, trademarks and other related to the Fox Industries acquisition.

(2) Revisions related to the Keymark acquisition included a $5.9 million increase in goodwill with a corresponding decrease in non-compete agreements, trademarks and other.

(3) Reclassifications in 2012 related to finalizing accounting for acquisitions, including a $1.2 million increase to unpatented technology with a corresponding decrease in non-compete agreements, trademarks and other related to the Keymark acquisition.

(4) Reclassifications in 2013 related to finalizing accounting for acquisitions, including increases of $12.8 million and $1.5 million related to the S&P Clever and CarbonWrap acquisitions, respectively, with a corresponding decrease in non-compete agreements, trademarks and other.

(5) Reclassifications in 2012 related to finalizing accounting for acquisitions, including increases of $1.3 million and $0.4 million to customer relations related to the Fox Industries and Automatic Stamping acquisitions, respectively, with a corresponding decrease in non-compete agreements, trademarks and other.

(6) Reclassifications in 2013 related to finalizing accounting for acquisitions, including a $1.9 million increase to customer relations related to the S&P Clever acquisition with a corresponding decrease in non-compete agreements, trademarks and other.

(7) Reclassifications in 2013 related to finalizing accounting for the S&P Clever acquisition, including increases to IPR&D indefinite-lived assets as well as the reclassification of the Quik-Drive trade name from other non-current assets.

Amortizable and indefinite-lived assets, net, by segment were as follows:

	At December 31, 2012
	Gross					Net
	Carrying		Accumulated			Carrying
Total Intangible Assets	Amount		Amortization			Amount
North America	$	37,992	$	(12,012	)	$	25,980
Europe	31,701		(7,083		)	24,618
Total	$	69,693	$	(19,095	)	$	50,598

	At December 31, 2013
	Gross					Net
	Carrying		Accumulated			Carrying
Total Intangible Assets	Amount		Amortization			Amount
North America	$	34,520	$	(15,909	)	$	18,611
Europe	33,217		(10,055		)	23,162
Total	$	67,737	$	(25,964	)	$	41,773

Adoption of Statements of Financial Accounting Standards

In February 2013, the FASB issued an amendment to the comprehensive income guidance requiring reporting of the effect of significant reclassifications out of other comprehensive income on the respective lines in net income if the amount being reclassified is required to be reclassified in its entirety to net income. For other amounts that are not required to be reclassified in their entirety to net income in the same reporting period, an entity is required to cross-reference other disclosures that provide additional information about these amounts. This amendment is effective for fiscal years beginning after December 15, 2012, and interim periods within those years. The implementation of this amended accounting guidance did not have a material effect on the Company’s consolidated financial position and results of operations.

In July 2013, the FASB issued an amendment to the income taxes guidance that applies to all entities. It is expected to reduce diversity in practice by providing guidance on the presentation of unrecognized tax benefits. The amendment is intended to better reflect the manner in which an entity would settle at the reporting date any additional income taxes that would result from the disallowance of a tax position related to net operating loss carryforwards, similar tax losses, or tax credit carryforwards. The Company’s early adoption and implementation of this amended accounting guidance did not have a material effect on the Company’s consolidated financial position and results of operations.

Recently Issued Accounting Standards

Recent authoritative guidance issued by the FASB (including technical corrections to the ASC), the American Institute of Certified Public Accountants, and the Securities and Exchange Commission did not or is not expected to have a material effect on the Company’s consolidated financial statements.

XML

Income Taxes (Details 2) (USD $)	12 Months Ended
	Dec. 31, 2013	Dec. 31, 2012	Dec. 31, 2011
Current deferred tax assets
State tax	$ 1,415,000	$ 1,133,000	$ 1,586,000
Workers' compensation	1,780,000	1,814,000	2,123,000
Health claims	601,000	516,000	549,000
Vacation liability	1,219,000	1,037,000	865,000
Allowance for doubtful accounts	181,000	332,000	291,000
Inventories	6,691,000	5,713,000	4,796,000
Sales incentive and advertising allowances	516,000	580,000	408,000
Intangible rights write-off			194,000
Acquisition expenses			477,000
Unrealized foreign exchange gain or loss	124,000	39,000	57,000
Other, net	172,000	309,000	428,000
Current deferred tax assets, net	12,699,000	11,473,000	11,774,000
Long-term deferred tax assets (liabilities)
Depreciation	(2,671,000)	(2,434,000)	(3,067,000)
Goodwill and other intangibles amortization	(9,781,000)	(4,086,000)	(314,000)
Deferred compensation related to stock options	6,104,000	7,296,000	5,485,000
Uncertain tax positions' unrecognized tax benefits	1,532,000	1,140,000	1,115,000
Non-United States tax loss carry forward	5,472,000	8,064,000	5,912,000
Tax effect on cumulative translation adjustment	(729,000)	(763,000)	(812,000)
Other	940,000	526,000	811,000
Long-term deferred tax assets (liabilities), gross	867,000	9,743,000	9,130,000
Less valuation allowances	(5,546,000)	(9,719,000)	(6,279,000)
Long-term deferred tax assets (liabilities), net	(4,679,000)	24,000	2,851,000
Deferred tax assets	22,000,000	21,600,000	21,400,000
Deferred tax liabilities	14,000,000	10,100,000	6,700,000
Operating loss carryforwards
Deferred tax valuation allowances	5,500,000	9,700,000
Increase (decrease) in the valuation allowance	(4,200,000)	3,400,000	(900,000)
Undistributed earnings indefinitely reinvested	34,800,000	29,000,000	20,900,000
Foreign
Operating loss carryforwards
Pre-tax loss carryforwards	23,600,000
Foreign | Wholly owned Irish subsidiary
Operating loss carryforwards
Pre-tax loss carryforwards	11,600,000
Foreign | Expiration, 2014
Operating loss carryforwards
Pre-tax loss carryforwards	900,000
Foreign | Expiration, 2015
Operating loss carryforwards
Pre-tax loss carryforwards	700,000
Foreign | Expiration, 2016
Operating loss carryforwards
Pre-tax loss carryforwards	800,000
Foreign | Expiration, 2017
Operating loss carryforwards
Pre-tax loss carryforwards	1,700,000
Foreign | Expiration, 2018
Operating loss carryforwards
Pre-tax loss carryforwards	$ 1,500,000

XML

Operations and Summary of Significant Accounting Policies (Policies)

12 Months Ended

Dec. 31, 2013

Operations and Summary of Significant Accounting Policies

Principles of Consolidation

Principles of Consolidation

The consolidated financial statements include the accounts of Simpson Manufacturing Co., Inc. and its subsidiaries. Investments in 50% or less owned entities are accounted for using either cost or the equity method. The Company consolidates all variable interest entities (VIEs) where it is the primary beneficiary. There were no VIEs as of December 31, 2013 or 2012. All significant intercompany transactions have been eliminated.

Use of Estimates

Use of Estimates

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Revenue Recognition

Revenue Recognition

The Company recognizes revenue when the earnings process is complete, net of applicable provision for discounts, returns and incentives, whether actual or estimated based on the Company’s experience. This generally occurs when products are shipped to the customer in accordance with the sales agreement or purchase order, ownership and risk of loss pass to the customer, collectability is reasonably assured and pricing is fixed or determinable. The Company’s general shipping terms are F.O.B. shipping point, where title is transferred and revenue is recognized when the products are shipped to customers. When the Company sells F.O.B. destination point, title is transferred and the Company recognizes revenue on delivery or customer acceptance, depending on terms of the sales agreement. Service sales, representing after-market repair and maintenance, engineering activities, software license sales and service and lease income, though significantly less than 1% of net sales and not material to the consolidated financial statements, are recognized as the services are completed or the software products and services are delivered. If actual costs of sales returns, incentives and discounts were to significantly exceed the recorded estimated allowances, the Company’s sales would be adversely affected.

Reclassification

Reclassification

The Company reclassified $0.7 million from the 2011 write down of excess and obsolete inventory to changes in inventories, net of effect of acquisitions and dispositions, in the Consolidated Statements of Cash Flows.

Cash Equivalents

Cash Equivalents

The Company considers all highly liquid investments with an original or remaining maturity of three months or less at the time of purchase to be cash equivalents.

Investments

Investments

In 2011, the Company disposed of its only minority investment. Minority investments are carried either at cost or by the equity method of accounting, depending on the Company’s ownership interest and its ability to influence the operating or financial decisions of the investee, and are classified as long-term investments.

The Company periodically reviews its investments for impairment. If the carrying value of an investment exceeds its fair value and the decline in fair value is determined to be other-than-temporary, the Company writes down the value of the investment to its fair value.

Allowance For Doubtful Accounts

Allowance for Doubtful Accounts

The Company assesses the collectability of specific customer accounts that would be considered doubtful based on the customer’s financial condition, payment history, credit rating and other factors that the Company considers relevant, or accounts that the Company assigns for collection. The Company reserves for the portion of those outstanding balances that the Company believes it is not likely to collect based on historical collection experience. The Company also reserves 100% of the amounts that it deems uncollectable due to a customer’s deteriorating financial condition or bankruptcy. If the financial condition of the Company’s customers were to deteriorate, resulting in probable inability to make payments, additional allowances may be required.

Inventory Valuation

Inventory Valuation

Inventories are stated at the lower of cost or net realizable value (market). Cost includes all costs incurred in bringing each product to its present location and condition, as follows:

· Raw materials and purchased finished goods for resale — principally valued at cost determined on a weighted average basis; and

· In-process products and finished goods — cost of direct materials and labor plus attributable overhead based on a normal level of activity.

The Company applies net realizable value and obsolescence to the gross value of the inventory. The Company estimates net realizable value based on estimated selling price less further costs to completion and disposal. The Company impairs slow-moving products by comparing inventories on hand to projected demand. If on-hand supply of a product exceeds projected demand or if the Company believes the product is no longer marketable, the product is considered obsolete inventory. The Company revalues obsolete inventory to its net realizable value. The Company has consistently applied this methodology. The Company believes that this approach is prudent and makes suitable impairments for slow-moving and obsolete inventory. When impairments are established, a new cost basis of the inventory is created. Unexpected change in market demand, building codes or buyer preferences could reduce the rate of inventory turnover and require the Company to recognize more obsolete inventory.

Sales Incentive and Advertising Allowances

Sales Incentive and Advertising Allowances

The Company records estimated reductions to revenues for sales incentives, primarily rebates for volume discounts, and allowances for co-operative advertising.

Allowances for Sales Discounts

Allowances for Sales Discounts

The Company records estimated reductions to revenues for discounts taken on early payment of invoices by its customers.

Warranties

Warranties

The Company provides product warranties for specific product lines and accrues for estimated future warranty costs, none of which has been material to the consolidated financial statements, in the period in which the sale is recorded. In a limited number of circumstances, the Company may also agree to indemnify customers against legal claims made against those customers by the end users of the Company’s products. Historically, payments made by the Company, if any, under such agreements have not had a material effect on the Company’s consolidated results of operations, cash flows or financial position.

Fair Value of Financial Instruments

Fair Value of Financial Instruments

The “Fair Value Measurements and Disclosures” topic of the Financial Accounting Standards Board (“FASB”) Accounting Standards CodificationTM (“ASC”) establishes a valuation hierarchy for disclosure of the inputs used to measure fair value. This hierarchy prioritizes the inputs into three broad levels as follows: Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities; Level 2 inputs are quoted prices for similar assets and liabilities in active markets or inputs that are observable for the asset or liability, either directly or indirectly through market corroboration, for substantially the full term of the financial instrument; Level 3 inputs are unobservable inputs based on the Company’s assumptions used to measure assets and liabilities at fair value. A financial asset’s or liability’s classification within the hierarchy is determined based on the lowest level input that is significant to the fair value measurement.

As of December 31, 2013, the Company’s investments consisted of only United States Treasury securities and money market funds, which are the Company’s primary financial instruments, maintained in cash equivalents and carried at cost, approximating fair value, based on Level 1 inputs. The balance of the Company’s primary financial instruments was as follows:

(in thousands)

At December 31,
2013		2012
$	117,571	$	76,130

The carrying amounts of trade accounts receivable, accounts payable and accrued liabilities approximate fair value due to the short-term nature of these instruments. The fair value of the Company’s line of credit is classified as Level 2 within the fair value hierarchy and is calculated based on borrowings with similar maturities, current remaining average life to maturity and current market conditions.

Property, Plant and Equipment including Depreciation and Amortization

Property, Plant and Equipment

Property, plant and equipment are carried at cost. Major renewals and betterments are capitalized. Maintenance and repairs are expensed on a current basis. When assets are sold or retired, their costs and accumulated depreciation are removed from the accounts, and the resulting gains or losses are reflected in the consolidated statements of operations.

The “Intangibles—Goodwill and Other” topic of the FASB ASC provides guidance on capitalization of the costs incurred for computer software developed or obtained for internal use. The Company capitalizes substantially all external costs and qualifying internal costs related to the purchase and implementation of software projects used for business operations and engineering design activities. Capitalized software costs primarily include purchased software and external consulting fees. Capitalized software projects are amortized over the estimated useful lives of the software.

Depreciation and Amortization

Depreciation of software, machinery and equipment is provided using accelerated methods over the following estimated useful lives:

Software	3 to 5 years
Machinery and equipment	3 to 10 years

Buildings and site improvements are depreciated using the straight-line method over their estimated useful lives, which range from 15 to 45 years. Leasehold improvements are amortized using the straight-line method over the shorter of the expected life or the remaining term of the lease. Amortization of purchased intangible assets with finite useful lives is computed using the straight-line method over the estimated useful lives of the assets.

In-Process Research and Development Assets

In-Process Research and Development Assets

In-process research and development (“IPR&D”) assets represent capitalized incomplete research projects that the Company acquired through business combinations. Such assets are initially measured at their acquisition-date fair values and are required to be classified as indefinite-lived assets until the successful completion of the associated research and development efforts. During the development period after the date of acquisition, these assets will not be amortized until the research and development projects are completed and the resulting assets are ready for their intended use. The Company performs an impairment test annually and more frequently if events or changes in circumstances indicate it that is more likely than not that the asset is impaired. On successful completion of the research and development project the Company makes a determination about the then-remaining useful life and begins amortization.

In connection with the 2012 S&P Clever acquisition, the Company recorded $4.8 million of in-process research and development assets, which were classified as indefinite-lived intangibles assets.

Cost of Sales

Cost of Sales

The types of costs included in cost of sales include material, labor, factory and tooling overhead, shipping, and freight costs. Major components of these expenses are material costs, such as steel, packaging and cartons, personnel costs, and facility costs, such as rent, depreciation and utilities, related to the production and distribution of the Company’s products. Inbound freight charges, purchasing and receiving costs, inspection costs, warehousing costs, internal transfer costs, and other costs of the Company’s distribution network are also included in cost of sales.

Tool and Die Costs

Tool and Die Costs

Tool and die costs are included in product costs in the year incurred.

Shipping and Handling Fees and Costs

Shipping and Handling Fees and Costs

The Company’s general shipping terms are F.O.B. shipping point. Shipping and handling fees and costs are included in revenues and product costs, as appropriate, in the year incurred.

Product and Software Research and Development Costs

Product and Software Research and Development Costs

Product research and development costs, which are included in operating expenses and are charged against income as incurred, were $10.7 million, $11.5 million and $6.1 million in 2013, 2012 and 2011, respectively. The types of costs included as product research and development expenses are typically related to salaries and benefits, professional fees and supplies. In 2013 and 2012, the Company incurred software development expenses related to its expansion into the plated truss market. The Company amortizes acquired patents over their remaining lives and performs periodic reviews for impairment. The cost of internally developed patents is expensed as incurred.

Selling Costs

Selling Costs

Selling costs include expenses associated with selling, merchandising and marketing the Company’s products. Major components of these expenses are personnel, sales commissions, facility costs such as rent, depreciation and utilities, professional services, information technology costs, sales promotion, advertising, literature and trade shows.

Advertising Costs

Advertising Costs

Advertising costs are included in selling expenses, are expensed when the advertising occurs, and were $7.0 million, $7.2 million and $6.3 million in 2013, 2012 and 2011, respectively.

Income Taxes

Income Taxes

Income taxes are calculated using an asset and liability approach. The provision for income taxes includes federal, state and foreign taxes currently payable and deferred taxes, due to temporary differences between the financial statement and tax bases of assets and liabilities. In addition, future tax benefits are recognized to the extent that realization of such benefits is more likely than not.

Sales Taxes

Sales Taxes

The Company presents taxes collected and remitted to governmental authorities on a net basis in the accompanying consolidated statements of operations.

Foreign Currency Translation

Foreign Currency Translation

The local currency is the functional currency of the Company’s operations in Europe, Canada, Asia, Australia, New Zealand and South Africa. Assets and liabilities denominated in foreign currencies are translated using the exchange rate on the balance sheet date. Revenues and expenses are translated using average exchange rates prevailing during the year. The translation adjustment resulting from this process is shown separately as a component of stockholders’ equity. Foreign currency transaction gains or losses are included in general and administrative expenses.

Plant Closure

Plant Closure

In September 2012, the Company decided to discontinue manufacturing heavy-duty mechanical anchors made in its facility in Ireland, which were sold mainly in Europe, to focus on selling light-duty and medium-duty anchors and its fastener products in conjunction with its connector products. In December 2012, the Company ceased producing and selling heavy-duty mechanical anchors and terminated employees in Europe, primarily in Ireland and Germany, who were manufacturing, selling or supporting the product line. In the third quarter of 2013, the Company concluded remaining activities associated with the terminated product line, including transferring remaining inventories and certain fixed assets to its other operating locations and preparing the site for lease. All costs associated with the closure were reported in the Europe segment.

At December 31, 2012, the long-lived assets of the Ireland facility had a net book value of $2.8 million, including land and building with a net book value of $2.7 million. In the first quarter of 2013, the Company concluded that the carrying value of its Ireland facility, associated with the Europe segment, exceeded its net estimated realizable value, and therefore recorded an impairment charge of $1.0 million, within general and administrative expenses. The net realizable value was based on the Company’s intent to lease the facility. In September 2013, after receiving an offer that exceeded expectations, the Company reconsidered leasing the facility and decided to accept the offer. The facility had a remaining net book value of $1.7 million and was sold for $1.0 million, resulting in a $0.7 million loss on sales of assets. Remaining equipment with a net book value of $0.1 million was sold to outside parties, transferred to other branches within the Company or scrapped. See note 5.

In 2012, the Company recorded employee severance obligations of $3.0 million, of which $2.4 million was paid in 2012, and $0.6 million was accrued at December 31, 2012. In the first nine months of 2013, severance payments of $0.3 million were made and severance charges of $0.2 million were reversed due to a court decision requiring the Company to retain an employee until 2014. No additional severance obligations were recorded in 2013. The remaining balance, of less than $0.1 million to be paid in 2014, represents the statutory and discretionary amounts due to employees that were or will be involuntarily terminated. The Company does not expect to record additional severance expense in 2014.

Closure liabilities are recognized when a transaction or event has occurred that leaves little or no discretion to avoid future settlement of the liability. As of December 31, 2012, the Company had recorded $0.3 million in plant closure expenses, of which $0.2 million was paid in 2012 and $0.1 million was paid in 2013. In 2013, the Company had recorded an additional $0.1 million in plant closure costs and paid $0.2 million in accrued plant closure costs.

In December 2013, the Company had substantially completed the liquidation of its Irish subsidiary, which included liquidating nearly all of its assets and settling most of its debts. As a result, the Company reclassified $2.8 million of its accumulated other comprehensive income, related to foreign exchange losses from its Irish subsidiary, to its consolidated statement of operations. This amount is classified as a loss on disposal of assets and was recorded in the Administrative & All Other segment.

Sale of Product Line

Sale of Product Line

In December 2013, the Company sold its CarbonWrap product line to The DowAksa USA, LLC for $3.8 million. The CarbonWrap product line had assets of $2.0 million, consisting of $1.5 million in intangible assets and $0.5 million in goodwill. As part of the transaction, the Company also incurred severance costs of $0.5 million. As a result of this transaction the Company recognized a pre-tax gain of $1.4 million.

Because the CarbonWrap assets constituted an integrated business in the US reporting unit, a portion of the US reporting unit’s goodwill must be included in the carrying amount of the asset group disposed. The amount of goodwill from the US reporting unit included in the CarbonWrap asset group was $0.5 million, which was proportionate to the fair value of the CarbonWrap asset group compared to the estimated fair value of the US reporting unit.

The Company continues to invest in related product lines, such as those acquired from Fox Industries, Inc. in 2011 and S&P Clever in 2012. See note 2.

Common Stock and Preferred Stock

Common Stock

Subject to the rights of holders of any preferred stock that may be issued in the future, holders of common stock are entitled to receive such dividends, if any, as may be declared from time to time by the Company’s Board of Directors (the “Board”) out of legally available funds, and in the event of liquidation, dissolution or winding-up of the Company, to share ratably in all assets available for distribution. The holders of common stock have no preemptive or conversion rights. Subject to the rights of any preferred stock that may be issued in the future, the holders of common stock are entitled to one vote per share on any matter submitted to a vote of the stockholders, except that, subject to compliance with pre-meeting notice and other conditions pursuant to the Company’s Bylaws, stockholders may cumulate their votes in an election of directors, and each stockholder may give one candidate a number of votes equal to the number of directors to be elected multiplied by the number of shares held by such stockholder or may distribute such stockholder’s votes on the same principle among as many candidates as such stockholder thinks fit. A director is elected if the votes cast “for” such director’s election exceed the votes cast “against” such director’s election, except that, if a stockholder properly nominates a candidate for election to the Board, the candidates with the highest number of affirmative votes (up to the number of directors to be elected) are elected. There are no redemption or sinking fund provisions applicable to the common stock.

In 1999, the Company declared a dividend distribution of one Right to purchase Series A Participating preferred stock per share of common stock. The Rights will be exercisable, unless redeemed earlier by the Company, if a person or group acquires, or obtains the right to acquire, 15% or more of the outstanding shares of common stock or commences a tender or exchange offer that would result in it acquiring 15% or more of the outstanding shares of common stock, either event occurring without the prior consent of the Company. The amount of Series A Participating preferred stock that the holder of a Right is entitled to receive and the purchase price payable on exercise of a Right are both subject to adjustment. Any person or group that acquires 15% or more of the outstanding shares of common stock without the prior consent of the Company would not be entitled to this purchase. Any stockholder who held 25% or more of the Company’s common stock when the Rights were originally distributed would not be treated as having acquired 15% or more of the outstanding shares unless such stockholder’s ownership is increased to more than 40% of the outstanding shares.

The Rights will expire on June 14, 2019, or they may be redeemed by the Company at one cent per Right prior to that date. The Rights do not have voting or dividend rights and, until they become exercisable, have no dilutive effect on the earnings of the Company. One million shares of the Company’s preferred stock have been designated Series A Participating preferred stock and reserved for issuance on exercise of the Rights. No event during 2013 made the Rights exercisable.

Preferred Stock

The Board has the authority to issue the authorized and unissued preferred stock in one or more series with such designations, rights and preferences as may be determined from time to time by the Board. Accordingly, the Board is empowered, without stockholder approval, to issue preferred stock with dividend, redemption, liquidation, conversion, voting or other rights that could adversely affect the voting power or other rights of the holders of the Company’s common stock.

Net Income per Common Share

Net Income per Common Share

Basic net income per common share is computed based on the weighted average number of common shares outstanding. Potentially dilutive shares, using the treasury stock method, are included in the diluted per-share calculations for all periods when the effect of their inclusion is dilutive.

The following shows a reconciliation of basic earnings per share (“EPS”) to diluted EPS:

(in thousands, except per-share amounts)

	Year Ended December 31,
	2013		2012		2011
Net income available to common stockholders	$	50,971	$	41,918	$	50,900
Basic weighted average shares outstanding	48,521		48,339		48,974
Dilutive effect of potential common stock equivalents — stock options	152		73		49
Diluted weighted average shares outstanding	48,673		48,412		49,023
Net earnings per share:
Basic	$	1.05	$	0.87	$	1.04
Diluted	$	1.05	$	0.87	$	1.04
Potentially dilutive securities excluded from earnings per diluted share because their effect is anti-dilutive	—		1,700		1,363

Anti-dilutive shares attributable to outstanding stock options were excluded from the calculation of diluted net income per share.

The potential tax benefits derived from the amount of the average stock price for the period in excess of the grant date fair value of stock options, known as the windfall tax benefit, is added to the proceeds of stock option exercises under the treasury stock method for computing the amount of dilutive securities used to determine the outstanding shares for the calculation of diluted earnings per share.

Comprehensive Income

Comprehensive Income

Comprehensive income is defined as net income plus other comprehensive income. Other comprehensive income consists of changes in cumulative translation adjustments and changes in unamortized pension adjustments recorded directly in accumulated other comprehensive income within stockholders’ equity. The following shows the components of accumulated other comprehensive income as of December 31, 2013 and 2012:

(in thousands)

	December 31,
	2013			2012
Translation adjustments, net of tax of $854 and $883 as of 2013 and 2012, respectively	$	18,283		$	12,342
Unamortized pension adjustments, net of tax of $43 and $46 as of 2013 and 2012, respectively	(197		)	(243		)
Total accumulated other comprehensive income	$	18,086		$	12,099

The 2013 translation adjustments activity included the realization of $2.8 million in cumulative currency translation adjustments related to the liquidation of the Irish subsidiary as a net loss on disposal of assets in the Consolidated Statements of Operations.

Concentration of Credit Risk

Concentration of Credit Risk

Financial instruments that potentially subject the Company to concentrations of credit risk consist of cash in banks, short-term investments in United States Treasury securities, money market funds and trade accounts receivable. The Company maintains its cash in demand deposit and money market accounts held primarily at eleven banks.

Accounting for Stock-Based Compensation

Accounting for Stock-Based Compensation

With the approval of the Company’s stockholders on April 26, 2011, the Company adopted the Simpson Manufacturing Co., Inc. 2011 Incentive Plan (the “2011 Plan”). The 2011 Plan amended and restated in their entirety, and incorporated and superseded, both the Simpson Manufacturing Co., Inc. 1994 Stock Option Plan (the “1994 Plan”), which was principally for the Company’s employees, and the Simpson Manufacturing Co., Inc. 1995 Independent Director Stock Option Plan (the “1995 Plan”), which was for its independent directors. Options previously granted under the 1994 Plan or the 1995 Plan will not be affected by the adoption of the 2011 Plan and will continue to be governed by the 1994 Plan or the 1995 Plan, respectively.

Under the 1994 Plan, the Company could grant incentive stock options and non-qualified stock options, although the Company granted only non-qualified stock options under the 1994 Plan and the 1995 Plan. The Company generally granted options under each of the 1994 Plan and the 1995 Plan once each year. The exercise price per share of each stock option granted in February 2011 under the 1994 Plan equaled the closing market price per share of the Company’s common stock as reported by the New York Stock Exchange on the day preceding the day that the Compensation and Leadership Development Committee of the Company’s Board of Directors met to approve the grant of the options. The exercise price per share under each option granted under the 1995 Plan was at the fair market value on the date specified in the 1995 Plan. Options vest and expire according to terms established at the grant date. Options granted under the 1994 Plan typically vest evenly over the requisite service period of four years and have a term of seven years. The vesting of options granted under the 1994 Plan will be accelerated if the grantee ceases to be employed by the Company after reaching age 60 or if there is a change in control of the Company. Options granted under the 1995 Plan were fully vested on the date of grant. Shares of common stock issued on exercise of stock options under the 1994 Plan and the 1995 Plan are registered under the Securities Act of 1933.

Under the 2011 Plan, the Company may grant incentive stock options, non-qualified stock options, restricted stock and restricted stock units, although the Company currently intends to award primarily restricted stock units and to a lesser extent, if at all, non-qualified stock options. The Company does not currently intend to award incentive stock options or restricted stock. Under the 2011 Plan, no more than 16.3 million shares of the Company’s common stock may be issued (including shares already sold) pursuant to all awards under the 2011 Plan, including on exercise of options previously granted under the 1994 Plan and the 1995 Plan. Shares of common stock to be issued pursuant to the 2011 Plan are registered under the Securities Act of 1933.

The following table shows the Company’s stock-based compensation activity for the years ended December 31, 2013, 2012 and 2011:

(in thousands)

	Years Ended December 31,
	2013			2012			2011
Stock-based compensation expense recognized in operating expenses	$	12,053		$	10,205		$	6,133
Tax benefit of stock-based compensation expense in provision for income taxes	4,225			3,610			2,261
Stock-based compensation expense, net of tax	$	7,828		$	6,595		$	3,872
Fair value of shares vested	$	12,090		$	10,195		$	6,194
Proceeds to the Company from the exercise of stock-based compensation	$	15,057		$	4,925		$	214
Tax benefit from exercise of stock-based compensation, including shortfall tax benefits	$	(2,645	)	$	(233	)	$	(1,554	)

(in thousands)

	At December 31,
	2013		2012		2011
Stock-based compensation cost capitalized in inventory	$	374	$	335	$	345

The stock-based compensation expense included in cost of sales, research and development and engineering expense, selling expense, or general and administrative expense depends on the job functions performed by the employees to whom the stock options were granted, or the restricted stock units were awarded.

The assumptions used to calculate the fair value of options or restricted stock units are evaluated and revised, as necessary, to reflect market conditions and the Company’s experience.

Goodwill Impairment Testing

Goodwill Impairment Testing

The Company tests goodwill for impairment at the reporting unit level on an annual basis (in the fourth quarter for the Company). The Company also reviews goodwill for impairment whenever events or changes in circumstances indicate the carrying value of an asset may not be recoverable. These events or circumstances could include a significant change in the business climate, legal factors, operating performance indicators, competition, or disposition or relocation of a significant portion of a reporting unit.

The reporting unit level is generally one level below the operating segment and is at the country level except in the United States and Australia and except for S&P Clever Reinforcement Company AG and S&P Clever International AG, both companies incorporated under the laws of Switzerland (collectively, “S&P Clever”).

The Company has determined that the United States reporting unit includes four components: Northwest United States, Southwest United States, Northeast United States and Southeast United States (collectively the “U.S. Components”). The Company aggregates the U.S. Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the U.S. Components working in concert. The U.S. Components are economically similar because of a number of factors, including, selling similar products to shared customers and sharing assets and services such as intellectual property, manufacturing assets for certain products, research and development projects, manufacturing processes, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the U.S. Components level and costs are allocated among the four U.S. Components.

The Company determined that the Australia reporting unit includes three components: Australia, New Zealand and South Africa (collectively the “AU Components”). The Company aggregates the AU Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the AU Components working in concert. The AU Components are economically similar because of a number of factors, including that New Zealand and South Africa operate as extensions of their Australian parent company selling similar products and sharing assets and services such as intellectual property, manufacturing assets for certain products, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the AU Components level and costs are allocated among the AU Components.

The Company has determined that the S&P Clever reporting unit includes seven components: S&P Switzerland, S&P Poland, S&P Austria, S&P The Netherlands, S&P Portugal, S&P Germany and S&P France (collectively the S&P Components”). The Company aggregates the S&P Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the S&P Components working in concert. The S&P Components are economically similar because of a number of factors, including sharing assets and services such as intellectual property, manufacturing assets for certain products, research and development projects, manufacturing processes, management of inventory excesses and shortages and administrative services. These activities are managed centrally at the S&P Components level and costs are allocated among the S&P Components.

The Company determined that the Denmark reporting unit includes two components: Denmark and Poland (collectively the “DK Components”). The Company aggregates the DK Components into a single reporting unit because management concluded that they are economically similar and that the goodwill is recoverable from the DK Components working in concert. The DK Components are economically similar because of a number of factors, including that Poland sells similar products and shares assets, such as intellectual property, manufacturing assets for certain products and management of inventory excesses and shortages.

For certain reporting units, the Company may first assess qualitative factors related to the goodwill of the reporting unit to determine whether it is necessary to perform a two-step impairment test. If the Company judges that it is more likely than not that the fair value of the reporting unit is greater than the carrying amount of the reporting unit, including goodwill, no further testing is required. If the Company judges that it is more likely than not that the fair value of the reporting unit is less than the carrying amount of the reporting unit, including goodwill, the Company will perform a two-step impairment test on goodwill. In the first step, the Company compares the fair value of the reporting unit to its carrying value. The fair value calculation uses a discounted cash flow model and may be supplemented by market approaches if information is readily available. If the Company judges that the carrying value of the net assets assigned to the reporting unit, including goodwill, exceeds the fair value of the reporting unit, a second step of the impairment test must be performed to determine the implied fair value of the reporting unit’s goodwill. If the Company judges that the carrying value of a reporting unit’s goodwill exceeds its implied fair value, the Company would record an impairment charge equal to the difference between the implied fair value of the goodwill and the carrying value.

Determining the fair value of a reporting unit or an indefinite-lived purchased intangible asset is a judgment involving significant estimates and assumptions. These estimates and assumptions include revenue growth rates, operating margins and working capital requirements used to calculate projected future cash flows, risk-adjusted discount rates, and future economic and market conditions (Level 3 fair value inputs). The Company bases its fair value estimates on assumptions that it believes to be reasonable, but that are unpredictable and inherently uncertain. Actual future results may differ from those estimates.

Assumptions about a reporting unit’s operating performance in the first year of the discounted cash flow model used to determine whether or not the goodwill related to that reporting unit is impaired are derived from the Company’s budget. The fair value model considers such factors as macro-economic conditions, revenue and expense forecasts, product line changes, material, labor and overhead costs, tax rates, working capital levels and competitive environment. Future estimates, however derived, are inherently uncertain but the Company believes that this is the most appropriate source on which to base its estimates.

The Company uses these parameters only to provide a basis for the determination of whether or not the goodwill related to a reporting unit is impaired. No inference whatsoever should be drawn from these parameters about the Company’s future financial performance and they should not be taken as projections or guidance of any kind.

The impairment charge taken in 2012 resulting from the Company’s annual impairment test in the fourth quarter of 2012 was associated with assets in the Germany reporting unit that were acquired in the years 2002 and 2008. The Germany reporting unit’s carrying value, including goodwill, exceeded the fair value, primarily due to reduced future expected net cash flows from weakening profit margins due to European economic conditions, specifically in Germany. The goodwill associated with the Germany reporting unit was fully impaired. The Company’s 2011 annual goodwill impairment analysis resulted in impairment charges associated with the U.K. reporting unit.

The Company’s S&P Clever reporting unit passed step one of the annual 2013 impairment test by a 9% margin indicating an estimated value greater than its net book value. The S&P Clever reporting unit is sensitive to management’s plans for increasing sales, margins and cash flows by expanding its sales into France, other European countries and selling into the Company’s Asia/Pacific segment, as well as the release of new products. The S&P Clever reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the S&P Clever reporting unit’s goodwill, which was $19.0 million at December 31, 2013.

The Company’s France reporting unit passed step one of the annual 2013 impairment test by a 10% margin. The France reporting unit is highly sensitive to management’s plans for increasing sales at or slightly above inflation in a recovering European economy, while maintaining operating margins and increasing cash flows. The France reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the France reporting unit’s goodwill, which was $14.9 million at December 31, 2013.

The Company’s Australia reporting unit passed step one of the annual 2013 impairment test by a 4% margin. The Australia reporting unit is highly sensitive to management’s plans for increasing sales, margins and cash flows by expanding activities in Australia, New Zealand and South Africa. The Australia reporting unit’s failure to meet management’s objectives could result in future impairment of some or all of the Australia reporting unit’s goodwill, which was $1.7 million at December 31, 2013.

Key Assumptions Used in the Annual Goodwill Impairment Testing

Key assumptions used in the annual goodwill impairment test (“Step 1”) using discounted cash flow models for the Company’s reporting units included compound annual growth rates (“CAGR”) and average annual pre-tax operating margins during the forecast period, and discount rates. Sensitivity assessment of key assumptions for the reporting unit annual impairment tests are presented in the table below for reporting units that passed Step 1 with a margin of 10% or less. The margin by which the reporting units passed the annual goodwill impairment test is noted in the table below.

							Pre-Tax
	Step 1		Discount				Operating
	Pass		Rate (1)		CAGR (2)		Margin (3)
	Margin		Increases		Decreases		Decreases
S&P Clever	9	%	7	%	6	%	10	%
France	10	%	13	%	19	%	15	%
Australia	4	%	2	%	2	%	6	%

(1) Hypothetical percentage increases noted in the discount rates, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values, and thus it would not result in the reporting unit failing Step 1 of the goodwill impairment test.

(2) Hypothetical percentage decreases noted in the CAGR, holding all other assumptions constant, would not have decreased the fair values of the reporting units below their carrying values.

(3) Hypothetical annual average percentage decreases noted in average annual pre-tax operating margins, holding all other assumptions constant, would not have decreased the fair value of the reporting units below their carrying values.

The changes in the carrying amount of goodwill, by segment, as of December 31, 2012 and 2013, were as follows:

(in thousands)

	North						Asia
	America			Europe			Pacific			Total
Balance as of January 1, 2012:
Goodwill	$	84,567		$	34,538		$	1,948		$	121,053
Accumulated impairment losses	(10,666		)	(10,538		)	—			(21,204		)
	73,901			24,000			1,948			99,849
Goodwill acquired	3,581			19,245			—			22,826
Foreign exchange	101			364			31			496
Impairment	—			(2,346		)	—			(2,346		)
Reclassifications (1)	1,156			—			—			1,156
Balance as of December 31, 2012:
Goodwill	89,405			54,147			1,979			145,531
Accumulated impairment losses	(10,666		)	(12,884		)	—			(23,550		)
	78,739			41,263			1,979			121,981
Goodwill acquired	918			674			—			1,592
Goodwill disposed	(480		)	—			—			(480		)
Foreign exchange	(248		)	1,393			(273		)	872
Impairment	—			—			—			—
Reclassifications (2)	5,893			(640		)	—			5,253
Balance as of December 31, 2013:
Goodwill	95,488			55,574			1,706			152,768
Accumulated impairment losses	(10,666		)	(12,884		)	—			(23,550		)
	$	84,822		$	42,690		$	1,706		$	129,218

(1)(2) See footnotes following table entitled Indefinite-Lived Intangibles, below.

Amortizable Intangible Assets

Amortizable Intangible Assets

The total gross carrying amount and accumulated amortization of intangible assets, most of which are or will be, subject to amortization at December 31, 2013, were $67.7 million and $26.0 million, respectively. The aggregate amount of amortization expense of intangible assets for the years ended December 31, 2013, 2012 and 2011 was $7.1 million, $7.8 million and $4.3 million, respectively.

The changes in the carrying amounts of patents, unpatented technologies and non-compete agreements and other intangible assets subject to amortization as of December 31, 2012 and 2013, were as follows:

(in thousands)

	Gross					Net
	Carrying		Accumulated			Carrying
Patents	Amount		Amortization			Amount
Balance at January 1, 2012	$	6,681	$	(4,767	)	$	1,914
Amortization	—		(610		)	(610		)
Foreign exchange	3		—			3
Balance at December 31, 2012	6,684		(5,377		)	1,307
Amortization	—		(611		)	(611		)
Foreign exchange	5		—			5
Balance at December 31, 2013	$	6,689	$	(5,988	)	$	701

	Gross						Net
	Carrying			Accumulated			Carrying
Unpatented Technology	Amount			Amortization			Amount
Balance at January 1, 2012	$	4,129		$	(1,395	)	$	2,734
Amortization	—			(622		)	(622		)
Foreign exchange	32			—			32
Reclassifications (3)	1,200			—			1,200
Balance at December 31, 2012	5,361			(2,017		)	3,344
Disposals	(1,530		)	158			(1,372		)
Amortization	—			(3,398		)	(3,398		)
Foreign exchange	799			—			799
Reclassifications (4)	14,347			—			14,347
Balance at December 31, 2013	$	18,977		$	(5,257	)	$	13,720

	Gross						Net
Non-Compete Agreements,	Carrying			Accumulated			Carrying
Trademarks and Other	Amount			Amortization			Amount
Balance at January 1, 2012	$	16,276		(5,361		)	10,915
Acquisition	32,355			—			32,355
Disposal	(2,212		)	1,628			(584		)
Amortization	—			(4,309		)	(4,309		)
Foreign exchange	(2		)	—			(2		)
Reclassifications (1)(3)(5)	(4,426		)	—			(4,426		)
Removal of fully amortized asset	(5,040		)	5,040			—
Balance at December 31, 2012	36,951			(3,002		)	33,949
Acquisition	4,130			—			4,130
Disposal	(200		)	74			(126		)
Amortization	—			(636		)	(636		)
Foreign exchange	(728		)	—			(728		)
Reclassifications (2)(4)(6)(7)	(26,588		)	—			(26,588		)
Removal of fully amortized asset	(10		)	10			—
Balance at December 31, 2013	$	13,555		$	(3,554	)	$	10,001

	Gross					Net
	Carrying		Accumulated			Carrying
Customer Relationships	Amount		Amortization			Amount
Balance at January 1, 2012	$	18,940	(6,647		)	12,293
Amortization	—		(2,052		)	(2,052		)
Foreign exchange	57		—			57
Reclassifications (5)	1,700		—			1,700
Balance at December 31, 2012	20,697		(8,699		)	11,998
Amortization	—		(2,465		)	(2,465		)
Foreign exchange	229		—			229
Reclassifications (6)	1,923		—			1,923
Balance at December 31, 2013	$	22,849	$	(11,164	)	$	11,685

(1)(2)(3)(4)(5)(6)(7) See footnotes following table entitled Indefinite-Lived Intangibles, below.

At December 31, 2013, estimated future amortization of intangible assets was as follows:

(in thousands)

2014	$	7,078
2015	6,162
2016	5,905
2017	3,953
2018	3,059
Thereafter	9,950
	$	36,107

Indefinite-Lived Intangible Assets

As of December 31, 2013, two unrelated IPR&D assets totaled $5.1 million and were included in the Company’s Consolidated Balance Sheets as intangible assets. One IPR&D asset was valued at $3.4 million and has been substantially completed, with the Company anticipating sales in early 2014. The other IPR&D asset of $1.7 million requires further field testing and the Company anticipates substantial completion in 2015. The Company’s asset impairment assessment of these two IPR&D assets did not result in impairment in 2013.

The changes in the carrying amounts of indefinite-lived trade name and IPR&D assets not subject to amortization as of December 31, 2013, were as follows:

					Net
					Carrying
Indefinite-Lived Intangibles	Trade Name		IPR&D		Amount
Balance at December 31, 2012	$	—	$	—	$	—
Reclassifications (7)	616		4,742		5,358
Foreign exchange	—		308		308
Balance at December 31, 2013	$	616	$	5,050	$	5,666

(1) Reclassifications in 2012 related to finalizing accounting for acquisitions, including a $1.7 million increase to goodwill with a corresponding decrease in non-compete agreements, trademarks and other related to the Automatic Stamping acquisition, partly offset by $0.5 million decrease to goodwill with a corresponding increase in other noncurrent assets non-compete agreements, trademarks and other related to the Fox Industries acquisition.

(2) Revisions related to the Keymark acquisition included a $5.9 million increase in goodwill with a corresponding decrease in non-compete agreements, trademarks and other.

(3) Reclassifications in 2012 related to finalizing accounting for acquisitions, including a $1.2 million increase to unpatented technology with a corresponding decrease in non-compete agreements, trademarks and other related to the Keymark acquisition.

(4) Reclassifications in 2013 related to finalizing accounting for acquisitions, including increases of $12.8 million and $1.5 million related to the S&P Clever and CarbonWrap acquisitions, respectively, with a corresponding decrease in non-compete agreements, trademarks and other.

(5) Reclassifications in 2012 related to finalizing accounting for acquisitions, including increases of $1.3 million and $0.4 million to customer relations related to the Fox Industries and Automatic Stamping acquisitions, respectively, with a corresponding decrease in non-compete agreements, trademarks and other.

(6) Reclassifications in 2013 related to finalizing accounting for acquisitions, including a $1.9 million increase to customer relations related to the S&P Clever acquisition with a corresponding decrease in non-compete agreements, trademarks and other.

(7) Reclassifications in 2013 related to finalizing accounting for the S&P Clever acquisition, including increases to IPR&D indefinite-lived assets as well as the reclassification of the Quik-Drive trade name from other non-current assets.

Amortizable and indefinite-lived assets, net, by segment were as follows:

	At December 31, 2012
	Gross					Net
	Carrying		Accumulated			Carrying
Total Intangible Assets	Amount		Amortization			Amount
North America	$	37,992	$	(12,012	)	$	25,980
Europe	31,701		(7,083		)	24,618
Total	$	69,693	$	(19,095	)	$	50,598

	At December 31, 2013
	Gross					Net
	Carrying		Accumulated			Carrying
Total Intangible Assets	Amount		Amortization			Amount
North America	$	34,520	$	(15,909	)	$	18,611
Europe	33,217		(10,055		)	23,162
Total	$	67,737	$	(25,964	)	$	41,773

Adoption of Statements of Financial Accounting Standards

Adoption of Statements of Financial Accounting Standards

In February 2013, the FASB issued an amendment to the comprehensive income guidance requiring reporting of the effect of significant reclassifications out of other comprehensive income on the respective lines in net income if the amount being reclassified is required to be reclassified in its entirety to net income. For other amounts that are not required to be reclassified in their entirety to net income in the same reporting period, an entity is required to cross-reference other disclosures that provide additional information about these amounts. This amendment is effective for fiscal years beginning after December 15, 2012, and interim periods within those years. The implementation of this amended accounting guidance did not have a material effect on the Company’s consolidated financial position and results of operations.

In July 2013, the FASB issued an amendment to the income taxes guidance that applies to all entities. It is expected to reduce diversity in practice by providing guidance on the presentation of unrecognized tax benefits. The amendment is intended to better reflect the manner in which an entity would settle at the reporting date any additional income taxes that would result from the disallowance of a tax position related to net operating loss carryforwards, similar tax losses, or tax credit carryforwards. The Company’s early adoption and implementation of this amended accounting guidance did not have a material effect on the Company’s consolidated financial position and results of operations.

XML

Selected Quarterly Financial Data (Unaudited) (Tables)

12 Months Ended

Dec. 31, 2013

Selected Quarterly Financial Data (Unaudited)

Schedule of selected quarterly financial data

(in thousands, except per share amounts)

	2013										2012
	Fourth		Third			Second		First			Fourth			Third		Second			First
	Quarter		Quarter			Quarter		Quarter			Quarter			Quarter		Quarter			Quarter
Net sales	$	160,322	$	195,877		$	195,596	$	154,535		$	144,686		$	172,113	$	181,703		$	158,734
Cost of sales	90,331		105,724			106,176		89,561			89,482			96,390		98,557			89,329
Gross profit	69,991		90,153			89,420		64,974			55,204			75,723		83,146			69,405
Research and development and other engineering	9,825		9,226			9,484		8,308			8,763			8,916		9,043			9,198
Selling	21,448		20,630			21,652		21,371			21,109			20,941		19,881			20,432
General and administrative	25,411		28,781			28,595		26,290			23,799			23,843		27,087			26,244
Impairment of goodwill	—		—			—		—			2,346			—		—			—
Loss (gain) on sale of assets	1,404		631			11		(8		)	124			33		(13		)	23
Income (loss) from operations	11,903		30,885			29,678		9,013			(937		)	21,990		27,148			13,508
Interest income, net	54		(9		)	1		38			35			55		58			65
Income (loss) before income taxes	11,957		30,876			29,679		9,051			(902		)	22,045		27,206			13,573
Provision for (benefit from) income taxes	4,289		10,870			11,177		4,256			(6,785		)	9,069		11,347			6,372
Net income	$	7,668	$	20,006		$	18,502	$	4,795		$	5,883		$	12,976	$	15,859		$	7,201
Earnings per common share:
Basic	$	0.16	$	0.41		$	0.38	$	0.10		$	0.12		$	0.27	$	0.33		$	0.15
Diluted	0.16		0.41			0.38		0.10			0.12			0.27		0.33			0.15
Cash dividends declared per common share	$	0.125	$	0.125		$	0.125	$	—		$	0.25		$	0.125	$	0.125		$	0.125

XML

Retirement Plans

12 Months Ended

Dec. 31, 2013

Retirement Plans

Retirement Plans

11. Retirement Plans

The Company has six defined contribution retirement plans covering substantially all salaried employees and nonunion hourly employees. Two of the plans, covering United States employees, provide for annual contributions in amounts that the Board may authorize, subject to certain limitations, but in no event more than the amounts permitted under the Internal Revenue Code as deductible expense. The other four plans, covering the Company’s European and Canadian employees, require the Company to make contributions ranging from 3% to 15% of the employees’ compensation. The total cost for these retirement plans for the years ended December 31, 2013, 2012 and 2011, was $8.2 million, $7.7 million and $6.7 million, respectively.

The Company also contributes to various industry-wide, union-sponsored pension funds for hourly employees who are union members and a statutorily required pension fund for employees in Switzerland. Payments to these funds aggregated $2.2 million, $2.1 million and $1.8 million for the years ended December 31, 2013, 2012 and 2011, respectively.