e10vqza

Exhibit 10.42

The symbol “[***]” denotes that confidential portions of this exhibit have been omitted in reliance on Rule 24b-2 of the Securities Exchange Act of 1934. The confidential portions have been submitted separately to the Securities and Exchange Commission.

MANUFACTURING AND SUPPLY AGREEMENT

By and Between

GUILFORD PHARMACEUTICALS INC.

and

BAXTER HEALTHCARE CORPORATION

TABLE OF CONTENTS


1. DEFINITIONS			1
2. ENGAGEMENT			5
2.1 Engagement of Baxter			5
2.2 Permits, Licenses and Authorizations			5
3. SUPPLY, FORECASTS AND ORDERS			5
3.1 Forecasts and Orders			5
3.2 Satisfaction of Firm Orders			6
3.3 Terms			6
3.4 Short Supply of Materials and/or Resources			6
3.5 Exclusive Manufacture and Supply			6
3.6 Cancellation of Firm Orders and Rescheduling			7
4. MANUFACTURING FEES & PAYMENTS			7
4.1 Manufacturing Fees			7
4.2 Application of Prices for each Tier			7
4.3 Underlying Assumptions			7
4.4 Fee to Re-Package Product			8
4.5 User Fees			8
4.6 Amount and Timing of Manufacturing Fee Increases			8
4.7 Notification, Effective Date and Application of Manufacturing Fee Increases			8
4.8 Payment for Product			9
4.9 Payment Penalties Charged to Guilford			9
4.10 Payment Penalties Charged to Baxter			9
5. PRODUCT DELIVERY, TITLE AND RISK OF LOSS			9
5.1 Delivery of Product			9
5.2 Shipment of Product			9
5.3 Title and Risk of Loss			10
6. BULK ACTIVE AND MATERIALS			10
6.1 Bulk Active Title, Risk of Loss and Use			10
6.2 Certificate of Analysis			10
6.3 Inventory Counts			10
6.4 Bulk Active Freight Claims			10
6.5 Materials – Container			11
6.6 Materials – Other than Container			11
7. GUILFORD WARRANTY AND LIMITATIONS			11
7.1 Guilford Warranties			11
7.2 Claims for Failure to Meet Bulk Active Specifications			12
7.3 Other Claims			12
7.4 Bulk Active not Meeting Warranties			13
8. BAXTER WARRANTY AND LIMITATIONS			13
8.1 Baxter Warranties			13
8.2 Claims for Failure to Meet Product Specifications			13
8.3 Other Claims			14
8.4 Product Not Meeting Warranties			15
9. INDEMNIFICATION			15
9.1 Baxter Indemnification			15
9.2 Guilford Indemnification			16
9.3 No Claim for Losses			16
9.4 Prompt Notice			16


9.5 Refund Due to Injunction			17
9.6 Not Binding			17
9.7 Additional Remedies			17
10. MARKETING			17
10.1 Catalog Listings			17
10.2 Baxter Promotion			17
10.3 Product Sales			18
10.4 Guilford Promotional Materials			18
10.5 Labeling			18
11. INTELLECTUAL PROPERTY			18
11.1 Registration of Trademarks			18
11.2 Ownership of Trademarks			18
11.3 License to Use Trademarks			19
11.4 Trademark Marking			19
11.5 Quality Control			19
11.6 Goodwill of Trademarks			19
11.7 Protection of Trademarks			19
11.8 License to Patents and Unpatented Technology			20
12. GUILFORD LICENSEES AND DISTRIBUTORS			20
12.1 Notification			20
12.2 Baxter Disapproval Due to Confidentiality Concerns			20
12.3 Other Baxter Disapproval			20
12.4 No Unreasonable Disapproval			21
12.5 Guilford License with Licensees			21
12.6 Approval [***] Rights			21
12.7 Distributors			21
12.8 Guilford Continuing Obligations			21
13. BULK ACTIVE LOSSES			21
14. ENVIRONMENT			21
14.1 Compliance with Laws			21
14.2 Indemnification			21
15. CONFIDENTIALITY			22
15.1 Confidentiality			22
15.2 Exceptions			22
15.3 Further Exception			23
15.4 Export			23
15.5 Enforcement			23
15.6 Prior Arrangements			24
15.7 Return of Confidential Information			24
15.8 Survival			24
16. TERM AND TERMINATION			24
16.1 Condition Precedent			24
16.2 Term			24
16.3 Termination for Default or Bankruptcy			25
16.4 Termination by Either Party Due to Change in Ownership			25
16.5 Termination by Guilford if Product Is Withdrawn from the U.S. Market			25
16.6 Termination by Guilford in the Event of Relocation of Facility			26
16.7 Termination by Guilford in the Event of Cross-Contamination			26
16.8 Dispositions of Inventory Upon Termination or Expiration			26
16.9 Remaining Obligations			27
16.10 Use of Trademarks			28
16.11 Alternative Suppliers			28

iii


17. WASTE/DISPOSAL			28
17.1 Baxter Warranty			28
17.2 Baxter Indemnification			29
17.3 Limitation			29
17.4 Guilford Indemnification			29
18. INSURANCE			29
18.1 Insurance Coverage			29
18.2 Evidence of Insurance			30
19. REGULATORY MATTERS			30
19.1 Maintenance of NDA			30
19.2 Communications with the FDA			30
20. QUALITY AGREEMENT			30
21. CTM SUPPLY AGREEMENT			30
22. SAFETY MATTERS, PRODUCT RETURN AND PRODUCT RECALL			31
22.1 Safety			31
22.2 Adverse Experience Reporting			31
22.3 Product Returns			31
22.4 Product Recall 31			31
23. MISCELLANEOUS			32
23.1 Force Majeure			32
23.2 Assignment			32
23.3 Severability			33
23.4 Notices			33
23.5 Applicable Law			34
23.6 Alternative Dispute Resolution			34
23.7 Entire Agreement			34
23.8 Amendment			35
23.9 Subcontracting			35
23.10 Headings			35
23.11 Independent Contractors			35
23.12 Waiver			35
23.13 Counterparts			35
23.14 Successors and Assigns			35
23.15 Execution			35
23.16 Remedies			35
23.17 Review with Counsel			35
23.18 Benefit			36
23.19 Merck/Baxter Agreement			36


Schedule A:		Product and Bulk Active Specifications
Schedule B:		Approved Vendors for Excipients
Schedule C:		Manufacturing Fees
Schedule D:		Product Definitions
Schedule E:		Bulk Active Losses
Schedule F:		Invoicing Requirements
Schedule G:		Initial Firm Order and Forecast
Schedule H:		Form of Purchase Order
Schedule I:		Financing Arrangements

MANUFACTURING AND SUPPLY AGREEMENT

This Manufacturing and Supply Agreement (the “Agreement”), is effective as of July 1, 2004 (the “Effective Date”), between Baxter Healthcare Corporation, a Delaware corporation, having its principal office at One Baxter Parkway, Deerfield, Illinois 60015 U.S.A. (“Baxter”) and Guilford Pharmaceuticals Inc., a Delaware corporation, having its principal office at 6611 Tributary Street, Baltimore, Maryland 21224 U.S.A. (“Guilford”).

WITNESSETH:

WHEREAS, Guilford has acquired from Merck & Co, Inc. (“Merck”) the commercial and intellectual property rights to the Product (as defined herein) in the United States and its territories; and

WHEREAS, Guilford desires to engage the facilities and services of Baxter to Manufacture (as defined herein) the Product for Guilford, and Baxter has appropriate facilities and the ability to Manufacture Product for Guilford and is willing to undertake the Manufacturing of Product for Guilford in accordance with the terms and conditions set forth herein; and

WHEREAS, Guilford will supply Bulk Active (as defined herein) to Baxter and Baxter will Manufacture the Product for Guilford at the Facility (as defined herein) on the terms specified herein; and

WHEREAS, Baxter and Guilford will enter into a separate CTM Supply Agreement (as defined herein) whereby Baxter will Manufacture clinical trial material for Guilford at the Facility on the terms and conditions specified in the CTM Supply Agreement and, for terms and conditions not specified in the CTM Supply Agreement, in accordance with the terms and conditions herein;

NOW, THEREFORE, in consideration of the mutual premises and covenants contained herein the parties agree as follows:

1. DEFINITIONS

Unless specifically set forth to the contrary herein, the following capitalized terms, whether used in the singular or plural, shall have the respective meanings set forth below:

1.1 The term “Baxter” as used hereinafter shall mean Baxter and its Affiliates.

1.2 The term “Affiliate” of Guilford or Baxter shall mean any corporation or business entity which controls, is controlled by or is under common control with Guilford or Baxter, as the case may be. A corporation or business entity shall be deemed to control another corporation or business entity if it owns, directly or indirectly, fifty percent (50%) or more of the securities or other ownership interests representing the equity, the voting stock or general partnership interest of such corporation or business entity.

1.3 The term “Act” shall mean the U.S. Federal Food, Drug, and Cosmetic Act, 21 U.S.C. § 301 et seq., as amended, and the regulations promulgated thereunder, as amended from time to time.

1.4 The term “Applicable Law” shall mean any United States (including federal, territorial, state, municipal and local) statute, law, ordinance, rule, regulation, administrative interpretation, order, writ, injunction, judicial decision, decree or other requirement of any Governmental Authority.

1.5 The term “Bulk Active” shall mean the pharmacologically active ingredient N-(Butylsulfonyl)-O-[4-(4-piperindinyl)butyl]-L- tyrosine monohydrochloride monohydrate, also known as “tirofiban hydrochloride”, and meeting the specifications specified in Schedule A.

1.6 The term “Bulk Active Specifications” shall mean the specifications and test methods for Bulk Active, specified in Schedule A, as they may be modified from time to time by Guilford.

1.7 The term “Bulk Production Lot” shall mean the total quantity of solution which has been mixed in one tank during the process of Manufacturing Product.

1.8 The term “Bulk Production Lot Number” shall mean the unique number assigned by Baxter to each Bulk Production Lot.

1.9 The term “Calendar Month” shall mean each month of the Calendar Year beginning with the first date of that month and ending with the last date of that same month.

1.10 The term “Calendar Quarter” shall mean each period of three (3) consecutive Calendar Months ending March 31, June 30, September 30 and December 31, as the case may be.

1.11 The term “Calendar Year” shall mean the period of January 1 to December 31.

1.12 The term “cGMPs” shall mean the current Good Manufacturing Practices as specified in the United States Code of Federal Regulations or in applicable regulations promulgated or issued by the FDA.

1.13 The term “Container” and “Flexible Container” shall mean Baxter’s container, the description and specifications of which are set forth in the Quality Agreement and in Baxter’s FDA filings, which is either a 250-mL or a 100-mL flexible non-PVC container having a single administration port containing PVC and wrapped in an overpouch.

1.14 The term “Container Drug Master File” or “CDMF” shall mean a separate filing with the FDA consisting of confidential detailed information about the facilities, processes and/or materials used in the manufacturing, processing, testing and/or storing of the Container. Information contained in a CDMF shall be used to support filings made to the FDA to obtain and maintain registration of the Product.

1.15 The term “CPI” shall mean the U.S. Consumer Price Index as published by the U.S. Department of Labor.

1.16 The term “CTM Supply Agreement” shall mean the Clinical Trial Material Supply Agreement dated as of the date hereof between Baxter and Guilford for the Manufacture and supply by Baxter to Guilford of batches of clinical trial material.

1.17 The term “Deliver”, “Delivered”, “Delivering” or “Delivery” by Baxter shall mean the act of Baxter in making complete shipment(s) of Product available to Guilford at Baxter’s Facility for immediate shipment and transportation by Guilford in accordance with Section 5.2, which Product shall be completely Manufactured, packaged and ready for administration.

1.18 The term “Distributors” shall mean those persons and/or entities engaged by Guilford and/or Guilford’s Affiliates to distribute Product in the Territory on behalf of Guilford and its Affiliates, but shall not include Licensees.

1.19 The term “Facility” shall mean that portion of Baxter’s facilities located at Highway 221 North Marion, North Carolina, used in the Manufacturing of the Product.

1.20 The term “FDA” shall mean the United States Food and Drug Administration and its successors.

1.21 The term “FIFO” shall mean first-in, first-out.

1.22 The term “Filling Production Lot” shall mean a quantity of solution taken from a Bulk Production Lot and filled into Containers.

1.23 The term “Filling Production Lot Number” shall mean (i) with respect to the first Filling Production Lot filled from a Bulk Production Lot, the Bulk Lot Production Number for such Bulk Product Lot, and (ii) with respect to each Filling Production Lot filled from the same Bulk Production Lot thereafter, a unique number assigned by Baxter to such Filling Production Lot.

1.24 The term “Firm Order” shall mean a binding commitment in writing and evidenced by a Purchase Order made by Guilford to purchase Product from Baxter pursuant to Section 3.1.2.

1.25 The term “Governmental Authority” shall mean any United States (including federal, territorial, state, municipal and local) governmental authority, quasi-governmental authority, instrumentality, court, government or self-regulatory organization (including any national or international securities exchange and The NASDAQ Stock Market), commission, tribunal or organization or any regulatory, administrative or other agency (including the FDA), or any political or other subdivision, department or branch of any of the foregoing.

1.26 The term “Licensees” shall mean those persons and/or entities to which Guilford and/or Guilford’s Affiliates shall, subject to Section 12, license its rights to market and sell the Product in the Territory.

1.27 The term “Lot Numbers” shall mean, collectively, the Bulk Production Lot Numbers and the Filling Production Lot Numbers.

1.28 The terms “Manufacture”, “Manufacturing” and “Manufactured” shall mean all operations of Baxter and its successors, permitted assigns and permitted subcontractors in the acquisition of Materials and the formulation of Product from Bulk Active, and in filling, labeling, packaging, warehousing and quality control testing of Product.

1.29 The term “Manufacturing Fee” shall mean the fee per unit paid by Guilford to Baxter for Product Manufactured in accordance with the terms of this Agreement.

1.30 The term “Materials” shall mean all raw materials, excipients, components, packaging materials (including the Container), and other items necessary for the Manufacture of Product as supplied by Baxter other than the Bulk Active, package inserts and any other items which are supplied by Guilford to Baxter.

1.31 The term “Merck/Baxter Agreement” means the Manufacturing and Supply Agreement dated as of April 15, 1995, as amended, by and between Merck and Baxter.

1.32 The term “NDA” shall mean the New Drug Application relating to Product filed in accordance with FDA regulations.

1.33 The term “Parametric Release” shall mean a review and comparison of sterilization records to validated parameters to effect release of a Filling Production Lot of Product in lieu of routine end product sterility testing.

1.34 The term “Product” shall mean AGGRASTAT® Pre-Mixed Injection in either (i) a 0.05 mg/mL bulk active in 0.9% normal saline and packaged as a terminally steam sterilized pre-mixed intravenous (I.V.) solution in Container, in package size and meeting the Product Specifications specified in Schedule A, which comprise a 12.5 mg dosage, 250 mL diluent volume pharmaceutical form (the “250 mL Product”), or (ii) a 0.05 mg/mL bulk active in 0.9% normal saline and packaged as a terminally steam sterilized pre-mixed intravenous (I.V.) solution in Container, in package size and meeting the Product Specifications specified in Schedule A, which comprise a 5.0 mg dosage, 100 mL diluent volume pharmaceutical form (the “100 mL Product”).

1.35 The term “Product Specifications” shall mean the specifications and test methods for Product as specified in Schedule A, as they may be modified from time to time in accordance with the Quality Agreement.

1.36 The term “Quality Agreement” shall mean the Quality Agreement dated as of the date hereof by and between Baxter and Guilford, together with the exhibits thereto, that provides the details on the responsibilities of the technical and quality activities required to Manufacture the Product.

1.37 The term “Related Agreements” shall mean, collectively, the Quality Agreement and the CTM Supply Agreement.

1.38 The term “Securities Laws” shall mean the United States Securities Act of 1933, as amended, the United States Securities Exchange Act of 1934, as amended, and any other similar law or regulation of a United States Governmental Authority, or any successor to any such laws or regulations, together with any rules, regulations or listing standards or agreements of any national or international securities exchange or The NASDAQ Stock Market, as generally applicable.

1.39 The term “Territory” shall mean the United States of America and its territories and possessions, including without limitation the Commonwealth of Puerto Rico, Guam and the U.S. Virgin Islands.

1.40 The term “Trademarks” shall mean, collectively, Baxter’s United States registered trademarks for the Container and Guilford’s United States registered trademark for Product.

2. ENGAGEMENT

2.1 Engagement of Baxter. Guilford hereby engages Baxter to Manufacture the Product at the Facility, subject to the conditions and terms set forth in this Agreement and the Related Agreements. Baxter accepts such engagement to Manufacture the Product and to perform such other acts as are provided in this Agreement and the Related Agreements.

2.2 Permits, Licenses and Authorizations. Except as otherwise agreed by the parties in writing, Baxter shall be responsible for obtaining, at its cost, all the necessary permissions, licenses and approvals for the Manufacture of Product in the Facility for distribution in the Territory.

3. SUPPLY, FORECASTS AND ORDERS

3.1 Forecasts and Orders. During the term of this Agreement the forecasting and ordering provisions set forth in this Section shall apply.

3.1.1 Forecasts. In order to assist Baxter in its production planning, at least [***] before the beginning of each Calendar Quarter, Guilford shall provide to Baxter a statement of its estimated purchase requirements (“Estimated Requirements”) and expected Delivery dates for Product for the [***] next succeeding such Calendar Quarter. It is understood that such Estimated Requirements shall not constitute commitments to purchase Product or Firm Orders.

3.1.2 Firm Orders. At least [***] days prior to the beginning of each Calendar Quarter, Guilford shall place a Firm Order for its requirements and requested Delivery dates of Product for such Calendar Quarter. Firm Orders shall be placed in amounts equal to the Filling Production Lot sizes, multiplied by whole number increments of the applicable minimum order quantities as set forth on Schedule C. Firm Orders for Product in such Calendar Quarter shall not be for less than seventy percent (70%) nor more than one hundred thirty percent

(130%) of Guilford’s Estimated Requirements of Product for such Calendar Quarter as most recently updated. Notwithstanding the foregoing, Baxter shall use reasonable efforts to comply with any subsequent changes in such Firm Orders, but shall not be held liable for its inability to do so. Guilford shall limit the number of requested Delivery dates to no more than two (2) per Calendar Month.

3.1.3 Initial Forecast and Firm Order. Attached hereto as Schedule G is Guilford’s initial Firm Order for its requirements of Product and requested Delivery dates for the period beginning on the Effective Date and ending on December 31, 2004, as well as Guilford’s Estimated Requirements and estimated Delivery dates for the next succeeding two (2) Calendar Quarters beginning October 1, 2004. Guilford shall deliver Estimated Requirements and estimated Delivery dates for the [***] beginning January 1, 2005 on or before [***].

3.2 Satisfaction of Firm Orders. Baxter shall confirm the receipt of each Firm Order within [***] of its receipt thereof. Subject to Section 23.1, Baxter shall meet Guilford’s requested Delivery dates. Baxter shall satisfy each Firm Order by Delivering not less than [***] and not more than [***] of the quantity of Product ordered by Guilford in each Firm Order to Guilford. Deliveries of Product shall be made on the date specified in the Firm Order, but in no event more than [***] in advance of the date specified in the Firm Order without Guilford’s prior written approval. Baxter shall notify Guilford at least [***] prior to actual Delivery of Product if Baxter is not Delivering Product to Guilford on the requested Delivery date.

3.3 Terms. Firm Orders will be made on the form of purchase order attached hereto as Schedule H or in such other form as Baxter and Guilford shall agree in writing from time to time (a “Purchase Order”), provided that the terms and conditions of this Agreement shall be controlling over any terms and conditions included in any such Purchase Order used in ordering Product.

3.4 Short Supply of Materials and/or Resources. In the event that the Materials and/or resources required to Manufacture Product are in short supply, Baxter shall notify Guilford of such shortage as soon as possible and shall allocate to Guilford a proportionate share of the available amount of such Materials and/or resources (as existing as of the time of such shortage and going forward) required for Manufacture of Product hereunder based upon Guilford’s projected requirements for Product hereunder, as compared to the projected requirements of other customers of Baxter who require use of such Materials or resources, for the ensuing [***] period.

3.5 Exclusive Manufacture and Supply. Except as otherwise contemplated in this Agreement, during the term and subject to the provisions of this Agreement and the Related Agreements, Baxter shall supply Product exclusively to Guilford in the Territory, and Guilford shall purchase exclusively from Baxter quantities of Product equal to Guilford’s needs for the Territory.

3.6 Cancellation of Firm Orders and Rescheduling. Guilford may cancel a Firm Order or reschedule requested Delivery dates to a later date by giving Baxter prior written notice to such effect. Baxter will use reasonable efforts to comply with Guilford’s requests and to avoid or minimize any costs incurred by Baxter as a result of such cancellation or change. If, however, either (i) a cancellation by Guilford of a Firm Order or (ii) a rescheduling of Delivery dates for a Firm Order that causes a rescheduling by Baxter of the Product manufacturing date, occurs less than [***] but more than [***] prior to Baxter’s scheduled production date for the Firm Order, Guilford will pay Baxter a cancellation fee or rescheduling fee equal to [***] of the Manufacturing Fee for such Firm Order, and if any such cancellation or rescheduling occurs [***] or less prior to Baxter’s scheduled production date for the Firm Order, Guilford will pay Baxter a cancellation fee or rescheduling fee equal to [***] of the Manufacturing Fee for such Firm Order. Notwithstanding the foregoing, if any such cancellation or rescheduling occurs [***] or more prior to Baxter’s scheduled production date for the Firm Order, Guilford shall not have any obligation to pay any cancellation fee, rescheduling fee or other penalty to Baxter.

4. MANUFACTURING FEES & PAYMENTS

4.1 Manufacturing Fees. The Manufacturing Fees charged by Baxter to Guilford for Product Manufactured hereunder shall be determined and paid as set forth in this Section 4 and in Schedule C. Guilford will purchase a minimum of one hundred thousand (100,000) units of Product during each Calendar Year of this Agreement, except the first Calendar Year (the “First Calendar Year”). During the First Calendar Year, the minimum requirement shall be 75,000 units and shall be reduced by the number of units that Guilford purchased from Merck during 2004. The 100,000 units may be any combination of 100 mL Product and 250 mL Product units [***]. If Guilford desires to have a different packaging configuration than shown on Schedule D, then the parties shall negotiate in good faith applicable Manufacturing Fees for such configuration.

4.2 Application of Prices for each Tier. The Manufacturing Fees shown in Schedule C correspond to an individual unit of Product depending on whether it is a 250 mL Product or a 100 mL Product. Firm Orders shall be placed by Guilford in whole number increments of the Order Quantities set forth in the tables provided in Schedule C. Baxter shall invoice Guilford at the Manufacturing Fee corresponding to applicable pricing tier reflected on Schedule C for each such unit.

4.3 Underlying Assumptions. The Manufacturing Fees set forth herein are based upon the following key assumptions:

(i) The Manufacturing Fees include all labor and Material costs incurred by Baxter (it being understood that Baxter shall incur no costs in connection with the Bulk Active or any other materials, such as package inserts, provided by Guilford) and excludes all applicable sales and value added taxes.

(ii) In the event either Guilford or Baxter shall desire to make any change in any label for the Product (including without limitation the bag label, the intermediate carton label and the case label) during the term of this Agreement, the parties shall meet to negotiate the additional costs to be incurred by Baxter, which costs shall be allocated between Guilford and Baxter as set forth in this Section 4.3(ii). With respect to label changes by Guilford, including both discretionary changes and changes required by the FDA or Applicable Law, Guilford may request, and Baxter shall implement [***]. If Guilford shall request (or shall be required by the FDA or Applicable Law to implement) [***], the parties shall meet to negotiate in good faith the additional costs to be incurred by Baxter in connection with such changes, which costs shall be invoiced separately by Baxter to Guilford, and Guilford will pay such amount to Baxter within [***] of invoicing by Baxter. With respect to label changes by Baxter, including both discretionary changes and changes required by the FDA or Applicable Law, Baxter shall bear the cost of such changes.

(iii) [***] testing is utilized throughout the Territory. [***] testing, if required, shall be separately paid for by Guilford as set forth in the Quality Agreement.

4.4 Fee to Re-Package Product. In the event that Guilford requests Baxter to re-package Product (for example, due to a change in the package insert), Baxter shall perform such re-packaging and will invoice Guilford on delivery of the re-packaged Product. The fee to Guilford will be [***] per unit of re-packaged Product.

4.5 User Fees. Baxter will pay all user and/or filing fees charged by Governmental Authorities in the Territory which relate to separate Container submissions. Guilford will pay all user and/or filing fees charged by Governmental Authorities in the Territory which relate to the NDA and ongoing marketing of the Product, including, but not limited to, the application fee (other than in connection with the Container), the drug product fee, and that portion of the drug establishment fee (DEF) assessed to Guilford by the FDA.

4.6 Amount and Timing of Manufacturing Fee Increases. Baxter may increase the Manufacturing Fees [***], which shall be further limited to a maximum increase of [***] for each Calendar Year. Baxter shall use its commercially reasonable efforts to minimize increases in its Material costs to Manufacture Product.

4.7 Notification, Effective Date and Application of Manufacturing Fee Increases. Baxter will provide to Guilford written notification, [***], of any proposed Manufacturing Fee increase pursuant to Section 4.6, which increase will become effective the following January 1. Such Manufacturing Fee increase shall not apply to Product already invoiced to Guilford, but shall apply to Product which has been released, Delivered and invoiced by Baxter to Guilford after the January 1 effective date.

4.8 Payment for Product. Baxter shall invoice Guilford upon release of Product to Guilford that has been quality control tested by Baxter in accordance with the Quality Agreement. Invoicing requirements are specified in Schedule F. Guilford shall make payment [***] of receipt of said invoice of Product in accordance with this Section 4.8 or of Delivery of Product by Baxter, whichever is later. Payment shall be remitted by wire transfer in U.S. dollars to a bank account designated in writing by Baxter. [***]

4.9 Payment Penalties Charged to Guilford. In addition to any other remedies available to Baxter under this Agreement, Baxter may charge Guilford a penalty for amounts not paid within the required [***] period set forth in Section 4.8. Such penalty shall be assessed based on the amount not paid when due at the rate of [***]. Such penalty shall not be assessed if the reason for the late payment is due to (i) discrepancies between Baxter’s invoice and the shipping records, (ii) incomplete documentation accompanying the Product Delivered by Baxter hereunder, or (iii) due to a claim asserted by Guilford pursuant to Section 8.2 or 8.3. Guilford shall notify Baxter as soon as practicable after it is aware that any of these circumstances exist, and the parties will in good faith attempt to resolve the discrepancy, incompleteness, error and/or dispute in a timely manner. In the event that such circumstances exist, then Guilford will have [***] after resolution of the matter to pay the amount so due before Baxter may assess the aforementioned penalty.

4.10 Payment Penalties Charged to Baxter. In addition to any other remedies available to Guilford under this Agreement, in the event that Baxter fails to Deliver on time (i.e., no later than Guilford’s requested Delivery date as set forth in Section 3.1.2) the Product subject to a Firm Order, Guilford may (i) reduce the invoice price relating to such Firm Order, or (ii) cancel such Firm Order if Baxter fails to Deliver to Guilford within [***] after Guilford’s requested Delivery date.

The amount of any such reduction in (i) above shall be equal to:

[***].

Notwithstanding the foregoing, if Baxter does not Deliver Product to Guilford in accordance with the requested Delivery date as provided for in Section 3 because of Guilford’s breach or negligence or a force majeure event affecting Baxter as set forth in Section 23.1, then the number of days by which Delivery by Baxter is considered late for purposes of enabling Guilford to reduce the invoice price shall commence upon [***].

5. PRODUCT DELIVERY, TITLE AND RISK OF LOSS

5.1 Delivery of Product. Baxter shall notify Guilford no less than [***] prior to each Delivery of Product by Baxter hereunder.

5.2 Shipment of Product. Guilford shall arrange for transportation of the Product Manufactured hereunder from Baxter’s Facility. Guilford shall assume the freight and insurance costs and risk of loss for the Product after Baxter

physically transfers the Product to Guilford’s designated carrier at Baxter’s Facility. Delivery shall be F.O.B. Baxter’s Facility. Guilford shall be subject to a penalty if Guilford or Guilford’s designated carrier does not pick up the Product from Baxter’s Facility within [***] after Delivery of such Product by Baxter to Guilford hereunder. The amount of such penalty will be equal to [***] of the invoice price. Notwithstanding the foregoing, if Guilford does not pick up the Product due to Baxter’s breach or negligence or a force majeure event affecting Guilford as set forth in Section 23.1, then the number of days Guilford is considered late for purposes of enabling Baxter to charge the penalty set forth in this Section 5.2 shall commence upon [***] after the date on which such situation shall be rectified.

5.3 Title and Risk of Loss. Title and risk of loss to Product sold hereunder shall pass to Guilford upon delivery at the F.O.B. point specified in Section 5.2.

6. BULK ACTIVE and MATERIALS

6.1 Bulk Active Title, Risk of Loss and Use. Guilford shall, at no cost to Baxter, at least [***] prior to the date of requested Delivery of Product pursuant to a Firm Order, supply to Baxter sufficient quantities of Bulk Active, and Bulk Active reference standard material for use in conducting assays, which will allow Baxter to meet its obligations to Manufacture Product in accordance with the terms of this Agreement. Baxter shall not be responsible for delays in Delivering Product to Guilford caused by delays in receipt of Bulk Active provided by Guilford. Title to Bulk Active shall remain at all times with Guilford; however, risk of loss shall pass to Baxter at the time Bulk Active arrives at the Facility and is accepted by Baxter from Guilford’s carrier. Baxter shall not use Bulk Active supplied by Guilford for any purpose other than the Manufacture of Product exclusively for Guilford hereunder or as otherwise agreed by the parties in writing.

6.2 Certificate of Analysis. Guilford shall provide Baxter with a certificate of analysis for each lot of Bulk Active delivered by Guilford to Baxter using the format set forth in the Quality Agreement. Guilford shall also provide Baxter with a certificate of analysis for each lot of Bulk Active reference standard material delivered to Baxter in the format set forth in the Quality Agreement.

6.3 Inventory Counts. Physical inventory counts of all Bulk Active shall be taken by Baxter at the end of each Calendar Month, reconciled to Baxter’s books and perpetual records, and promptly reported to Guilford in a form and level of detail specified in the Quality Agreement. Data trail/accountability information will be kept by Baxter for all receipts and disbursements of Bulk Active in accordance with the Quality Agreement. All inventories of Bulk Active will be subject to audit by Guilford in accordance with the Quality Agreement.

6.4 Bulk Active Freight Claims. Baxter shall maintain paperwork on all freight claims arising from Bulk Active that Baxter claims was delivered to its Facility in a damaged state. Baxter will assist Guilford in obtaining recovery for such freight claims, and Guilford shall reimburse Baxter for all reasonable

direct expenses including, but not necessarily limited to, salaries and wages of personnel and out-of-pocket costs, which are incurred and documented by Baxter in connection with such assistance.

6.5 Materials – Container. Baxter shall manufacture the Container itself and shall be responsible for approving all vendors of raw materials therefor. The Container shall meet the requirements of the Container specifications set forth in the Quality Agreement and shall be manufactured in accordance with cGMPs and all Applicable Laws, FDA requirements, CDMFs and approved FDA filings. Changes to the Container specifications shall be made only in accordance with the Quality Agreement.

6.6 Materials – Other than Container. All Materials (other than the Container) required for Manufacture of Product supplied by Baxter shall be purchased by Baxter from vendors approved by Baxter in accordance with Baxter’s vendor qualification and approval procedures, copies of which have been provided to Guilford. Baxter shall provide Guilford with copies of any amendments or revisions to such procedures during the term of this Agreement. Notwithstanding the foregoing, excipient vendors shall be approved in writing by Guilford in advance of use by Baxter for Manufacture of Product. Excipient vendors currently approved by Guilford are set forth on Schedule B; additional vendors may be added to Schedule B from time to time upon prior written agreement of the parties. Such Materials shall meet the requirements of the Product Specifications. All Materials supplied to Baxter by Guilford shall be purchased, inspected and released by Guilford per Guilford’s Standard Operating Procedures. Materials supplied by Guilford will be purchased from Guilford approved vendors.

7. GUILFORD WARRANTY AND LIMITATIONS

7.1 Guilford Warranties. Guilford represents and warrants that all Bulk Active shall, at the time of delivery to Baxter’s Facility (i) meet the Bulk Active Specifications; (ii) be manufactured in accordance with cGMPs; (iii) be manufactured in accordance with Applicable Laws and FDA requirements in effect on the day of delivery; and (iv) be fit for the Manufacture of the Product. Without limiting the warranty in Section 7.1(iii), Guilford represents and warrants that no Bulk Active shall, at the time of delivery, be (a) adulterated or misbranded within the meaning of the Act, or any similar law of any other jurisdiction in the Territory; or (b) an article which may not, under the provisions of the Act, or any similar law of any other jurisdiction in the Territory, be introduced into interstate commerce. Guilford also represents and warrants that the Bulk Active reference standard material shall, at the time of delivery to Baxter’s Facility, meet the assigned purity as set forth in the related certificate of analysis for such reference standard material. Guilford also represents and warrants (x) that it has acquired all commercial and intellectual property rights to the Product for the Territory which are necessary for Baxter to realize its rights and fulfill its obligations under this Agreement and the CTM Supply Agreement and to grant Baxter the licenses set forth in Article 11 below, and (y) that it has the right to enter into this Agreement and require Baxter to Manufacture Product in accordance with the terms and

conditions set forth herein and in the Quality Agreement. Guilford also represents and warrants that it has the right to enter into this Agreement in accordance with the terms and conditions set forth herein and in the Related Agreements, and that this Agreement and the Related Agreements will not conflict with, contravene or constitute a default under any other agreement, contract or other arrangement by which Guilford is bound, including without limitation the Merck/Guilford Agreement. NO OTHER EXPRESS OR IMPLIED WARRANTY EXISTS, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND GUILFORD EXPRESSLY DISCLAIMS ANY SUCH WARRANTIES.

7.2 Claims for Failure to Meet Bulk Active Specifications. Claims by Baxter on account of quality or concerning any failure of Bulk Active to meet the warranty specified in Section 7.1(i) shall be made promptly by Baxter, in writing, but no later than [***] following Baxter’s receipt of Bulk Active at the Facility. Claims by Baxter on account of shortage, loss or damage shall be made promptly by Baxter, in writing, but no later than [***] following Baxter’s receipt of Bulk Active at the Facility. In connection with such claim(s), Baxter shall, at Guilford’s request, investigate and re-test such Bulk Active and shall permit one or more representatives from Guilford to be present and participate in the investigation and re-testing by Baxter, which investigation and re-testing will be done at Baxter’s own cost. If Guilford and Baxter agree that the Bulk Active did not meet the warranties set forth in Section 7.1(i) upon delivery to Baxter, then Baxter shall destroy or return the Bulk Active to Guilford in accordance with Guilford’s instructions in accordance with the provisions of Section 7.4. If the Bulk Active is determined upon agreement by the parties to meet such warranty, then Baxter shall utilize the Bulk Active to Manufacture Product. If the parties are unable to agree as to whether such Bulk Active met such warranties, Baxter shall return the Bulk Active to Guilford and the parties shall cooperate to have the Bulk Active in dispute analyzed by an independent testing laboratory of recognized repute agreeable to both parties. The results of such laboratory testing shall be final and binding on the parties on the issue of compliance of the Bulk Active with such warranty. [***].

7.3 Other Claims. If Baxter claims that any shipment of Bulk Active did not, at the time of delivery, meet the warranties specified in Section 7.1(ii) or (iii), Baxter shall promptly (and in any event within [***]) notify Guilford and either destroy or return such Bulk Active to Guilford in accordance with Guilford’s instructions, and if Guilford and Baxter are unable to agree as to whether or not such Bulk Active met such warranties, the dispute shall be settled in accordance with the dispute resolution provisions set forth in Section 23.6. If the Bulk Active is determined to have met such warranties, then Baxter shall bear the cost of such dispute resolution proceedings, including Guilford’s reasonable attorneys’ fees. If the Bulk Active is determined not to have met any such warranty, then Guilford shall bear the cost of such proceedings, including Baxter’s reasonable attorneys’ fees, and shall pay Baxter for any Product Manufactured which incorporates such Bulk Active at the Manufacturing Fees specified in Section 4.

7.4 Bulk Active not Meeting Warranties. Any Bulk Active which fails to meet the warranties under Section 7.1 and which is in Baxter’s possession or control shall, at Guilford’s option, either be destroyed by Baxter or returned to Guilford pursuant to Guilford’s written instructions. Unless otherwise provided in Sections 7.2 and 7.3, Guilford shall assume the cost of destruction of such Bulk Active, or the freight and insurance costs and risk of loss for return of such Bulk Active after Baxter physically transfers the Bulk Active to Guilford’s designated carrier at Baxter’s Facility.

8. BAXTER WARRANTY AND LIMITATIONS

8.1 Baxter Warranties. Baxter represents and warrants that all Product shall, at the time of Delivery to Guilford (i) meet the Product Specifications; (ii) be Manufactured in accordance with cGMPs; and (iii) be Manufactured in accordance with the validated processes and test methods specified in NDA and other filings with the FDA maintained in the Territory with respect to Product, and with all Applicable Laws and regulations and FDA requirements in effect on the day of Delivery. Without limiting the warranty in Section 8.1(iii), Baxter guarantees that no Product shall, at the time of Delivery, be (a) adulterated or misbranded within the meaning of the Act, or any similar law of any other jurisdiction in the Territory, or (b) an article which may not, under the provisions of the Act, or any similar law of any other jurisdiction in the Territory, be introduced into interstate commerce. Baxter also represents and warrants that it has the right to enter into this Agreement and to Manufacture and supply Product to Guilford in accordance with the terms and conditions set forth herein and in the Related Agreements, and that this Agreement and the Related Agreements will not conflict with, contravene or constitute a default under any other agreement, contract or other arrangement by which Baxter is bound, including without limitation the Merck/Baxter Agreement. NO OTHER EXPRESS OR IMPLIED WARRANTY EXISTS, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND BAXTER EXPRESSLY DISCLAIMS ANY SUCH WARRANTIES.

8.2 Claims for Failure to Meet Product Specifications. If Guilford claims that any shipment of Product did not, at the time of Delivery to Guilford, meet the warranty specified in Section 8.1(i), Guilford shall notify Baxter within [***] from Guilford’s receipt of Product at the designated location; provided that in the case of latent defects that are not discoverable upon exercise of reasonable diligence within such [***] period, Guilford shall notify Baxter as soon as practicable upon discovery of such defect, however, in no event after the Product has expired according to its expiry date. If Guilford and Baxter are unable to agree as to whether such Product met such warranty, then the parties shall cooperate to have the Product in dispute analyzed by an independent testing laboratory of recognized repute selected by Guilford and approved by Baxter, which approval shall not be unreasonably withheld. The results of such laboratory testing shall be final and binding on the parties on the issue of compliance of the Product with such warranty. If the Product is determined to have met such warranty, then Guilford shall bear the cost of such laboratory testing. If the Product is determined not to have met such warranty for reasons

unrelated to a breach of Guilford’s warranty under Section 7.1, then Baxter shall:

(i) bear the cost of such laboratory testing;

(ii) pay Guilford, [***], which price may be adjusted by Guilford no more than once per Calendar Year by a percentage up to the percentage increase in the CPI for the most recently ended Calendar Year over the prior Calendar Year which shall be further limited to a maximum of [***] for that Calendar Year;

(iii) at Guilford’s written election, within [***] after receipt of such determination, either (a) replace the rejected Product within [***] of the date of such determination; or (b) at Baxter’s option either credit Guilford’s account or refund to Guilford an amount equal to the Manufacturing Fees paid for such Product, plus any applicable delivery charge paid by Guilford. In the event that Guilford does not make such written election within [***], then the election shall be made at Baxter’s option after written notification to Guilford;

(iv) pay to Guilford interest at the rate of [***] on the amount of payment(s) made by Guilford for such Product, if any, from the date that such payment was made until, as applicable, (a) [***] after delivery of the replacement Product and associated invoice to Guilford, or (b) deduction of the credit from an amount due by Guilford to Baxter on the date when due (i.e., the credit must actually be used by Guilford and not simply be posted by Baxter to Guilford’s account) or refund to Guilford, as applicable, pursuant to Section 8.2(iii)(b); and

(v) cancel any late fees assessed by Baxter to Guilford for non-payment or late payment of the invoice(s) relating to such Product which did not meet such warranty.

8.3 Other Claims. If Guilford claims that any shipment of Product did not, at the time of Delivery to Guilford, meet the warranties specified in Section 8.1(ii) or (iii), Guilford shall notify Baxter, and if Guilford and Baxter are unable to agree as to whether or not such Product met such warranties, the dispute shall be settled in accordance with the dispute resolution provisions set forth in Section 23.6. If the Product is determined to have met such warranties, then Guilford shall bear the cost of such dispute resolution proceedings, including Baxter’s reasonable attorneys’ fees. If the Product is determined not to have met any such warranty for reasons unrelated to a breach of Guilford’s warranty under Section 7.1, then Baxter shall:

(i) bear the cost of such dispute resolution proceedings, including Guilford’s reasonable attorneys’ fees;

(ii) pay Guilford, at the price established in Section 8.2(ii), for the Bulk Active consumed in the Manufacture of such Product;

(iii) at Guilford’s written election, within [***] after receipt of such determination, either (a) replace the rejected Product within [***] of the date of such determination; or (b) at Baxter’s option either credit Guilford’s account or refund to Guilford an amount equal to the Manufacturing Fees paid for such Product, plus any applicable delivery charge paid by Guilford. In the event that Guilford does not make such written election within [***], then the election shall be made at Baxter’s option after written notification to Guilford;

(iv) pay to Guilford interest at the rate of [***] on the amount of payment(s) made by Guilford for such Product, if any, from the date that such payment was made until, as applicable, (a) [***] after delivery of the replacement Product and associated invoice to Guilford, or (b) deduction of the credit from an amount due by Guilford to Baxter on the date when due (i.e., the credit must actually be used by Guilford and not simply be posted by Baxter to Guilford’s account) or refund to Guilford, as applicable, pursuant to Section 8.3(iii)(b); and

(v) cancel any late fees assessed by Baxter to Guilford for non-payment or late payment of the invoice(s) relating to such Product which did not meet such warranty.

8.4 Product Not Meeting Warranties. Any Product which fails to meet the warranties under Section 8.1 and which is in Guilford’s possession or control shall, at Guilford’s option, either be returned to Baxter for destruction in accordance with Baxter’s written shipping instructions, or destroyed by Guilford, in either case at Baxter’s expense. If returned to Baxter, then risk of loss for such Product shall pass to Baxter upon shipment from Guilford’s facility.

9. INDEMNIFICATION

9.1 Baxter Indemnification. Baxter shall defend, indemnify and hold harmless Guilford and its Affiliates, and their respective directors, officers, shareholders, employees and agents, and each of their successors and permitted assigns (collectively, the “Guilford Indemnitees”), from and against any and all claims, actions, causes of action, liabilities, losses, damages, costs or expenses, and resulting settlements, awards or judgments, including reasonable attorneys’ fees (collectively, “Damages”), which arise out of or relate to (i) the failure of Product provided by Baxter hereunder to meet the warranties set forth in Section 8.1; (ii) a breach by Baxter of any of its other representations, warranties, covenants, agreements or obligations under this Agreement or the Related Agreements; (iii) the negligence or willful misconduct of Baxter in Manufacturing Product or in the performance or nonperformance of any obligations under this Agreement or the Related Agreements; or (iv) any patent, trade name, trademark, service mark or copyright infringement or misuse, or any claim or judgment of such infringement or misuse thereof, relating to the Container or the Manufacture of the Product by Baxter (except to the extent covered by Guilford’s indemnification obligations pursuant to Section 9.2), or the use of the Baxter

Trademarks, trade names or copyrightable materials in connection with any labeling or promotional materials for the Product authorized by this Agreement; provided, that Baxter shall have no obligation to indemnify Guilford under this Section 9.1 to the extent such Damages arise out of or relate to any matter for which Guilford is obligated to indemnify Baxter under this Agreement or the Related Agreements.

9.2 Guilford Indemnification. Guilford, on its own behalf, and on behalf of its Affiliates and Licensees, shall defend, indemnify and hold harmless Baxter and its Affiliates and their respective directors, officers, shareholders, employees and agents, and each of their successors and permitted assigns (collectively, the “Baxter Indemnitees”), from and against any and all Damages which arise out of or relate to (i) the failure of Bulk Active provided by Guilford hereunder to meet the warranties set forth in Section 7.1; (ii) a breach of any of Guilford’s other representations, warranties, covenants, agreements or obligations under this Agreement or the Related Agreements; (iii) negligence or willful misconduct in the performance or nonperformance of Guilford’s obligations under this Agreement or the Related Agreements; (iv) personal injury or property damage caused by the Product (except to the extent covered by Baxter’s indemnification obligations hereunder, including those set forth in Sections 9.1, 14 and 17, and the Related Agreements); or (v) any patent, trade name, trademark, service mark or copyright infringement or misuse, or any claim or judgment of such infringement or misuse thereof, relating to the Bulk Active supplied by Guilford or to the Product (except to the extent covered by Baxter’s indemnification obligations hereunder, including those set forth in Section 9.1) or the use or printing of any trademarks, trade names or copyrightable materials of Guilford or its Affiliates, Licensees and Distributors as authorized by this Agreement; provided, that Guilford shall have no obligation to indemnify Baxter under this Section 9.2 to the extent such Damages arise out of or relate to any matter for which Baxter is obligated to indemnify Guilford under this Agreement or the Related Agreements.

9.3 No Claim for Losses. In no event shall either party or their respective Affiliates be liable for any special, indirect, incidental or consequential damages arising out of this Agreement, except to the extent any such special, indirect, incidental or consequential damages shall be payable to a third party.

9.4 Prompt Notice. Each party agrees to give the other prompt written notice of any claims made for which the other might be liable under the foregoing indemnifications. The party from whom indemnification is sought hereunder shall have the right to assume responsibility for any such claim for indemnification, including the defense thereof, by providing notice to the indemnified party within [***] of receipt of such notice and by selecting counsel reasonably acceptable to the indemnified party within such [***] period. The indemnified party will cooperate fully with the indemnifying party in defending or otherwise resolving any claim subject to indemnification hereunder, and the indemnifying party will have full control of the defense of any such litigation; however, the indemnified party, at its expense, shall be entitled to be represented by its own counsel in any such litigation. The

indemnifying party agrees to bear all other costs and expenses of litigation, including its own attorneys’ fees, in connection with such litigation. In the event the indemnifying party refuses or fails to assume defense of any such claim in accordance with the foregoing, or refuses or fails to appoint counsel reasonably acceptable to the indemnified party within the [***] time period set forth above, the indemnified party may retain reasonable counsel to defend the claim and the indemnifying party agrees to bear all reasonable costs and expenses of such litigation, including the indemnified party’s reasonable attorneys’ fees, in connection with such litigation.

9.5 Refund Due to Injunction. In the event that the sale of Product is enjoined due to an alleged or actual infringement of third party intellectual property rights by either party, then, in addition to all other rights and obligations of the parties hereunder (i) if Guilford is obligated under Section 9.2(v) to indemnify Baxter and Baxter’s Affiliates, Guilford shall pay Baxter for any affected Product remaining in Baxter’s possession at the Manufacturing Fees set forth in Section 4.1; and (ii) if Baxter is obligated under Section 9.1(iv) to indemnify Guilford and Guilford’s Affiliates, Baxter shall (a) return to Guilford any affected Bulk Active remaining in Baxter’s possession; and (b) refund to Guilford the Manufacturing Fees paid by Guilford, calculated on a FIFO basis, for all affected Product remaining in Guilford’s and its Affiliates’, Licensees’ and Distributors’ inventory as of the applicable date of injunction and subsequently returned to Guilford by its customers pursuant to the injunction after the injunction date.

9.6 Not Binding. Neither party nor its respective Affiliates shall be responsible or bound by any settlement made by the other party without its prior written consent.

9.7 Additional Remedies. The indemnification obligations of the parties established in this Section 9 shall be in addition to, and shall be available to the parties irrespective of the availability of, any other remedies expressly contemplated in this Agreement, including without limitation those contemplated in Sections 7, 8, 14, 17 and 22; provided, that no party shall be entitled to recover multiple damages for the same claim under multiple sections of this Agreement.

10. MARKETING

10.1 Catalog Listings. Each party may list Product in its catalogs as a regularly available item in the Territory. Baxter shall also be permitted to provide customers with its “sell sheets” listing the availability of Product. Baxter listings in catalogs and “sell sheets” will show no prices and Baxter will provide Guilford with a copy of such listings for prior written approval.

10.2 Baxter Promotion. Baxter shall not promote Product or its therapeutic qualities. Baxter will use reasonable efforts to promote acceptance and use of Container in the Territory. Any such promotion of the Container that is to include reference to the Product shall be approved in writing in advance by Guilford.

10.3 Product Sales. Nothing in Section 10.1 or 10.2 shall be construed to grant Baxter a license to sell Product. Guilford and its Affiliates, Licensees and Distributors shall be the exclusive marketers, sellers and distributors of Product in the Territory.

10.4 Guilford Promotional Materials. Guilford is responsible for, and is not required or expected to forward to Baxter for written approval, any promotional materials for Product, except as to the use of Baxter’s Trademarks as provided in Section 11 and except as to any statements and/or claims made regarding the Container. Baxter hereby agrees to the use of its Trademarks and the statements and/or claims regarding the Container made in the promotional materials that have been approved in writing by Baxter (the “Approved Materials”). Guilford need not submit individual promotional materials to Baxter for approval provided that any statements and/or claims made in such promotional materials using Baxter’s Trademarks or related to the Container are identical to the statements and/or claims made in the Approved Materials. If Guilford desires to make statements and/or claims related to the Container, or desires to use Baxter’s Trademarks, in either case in a manner not identical to the Approved Materials, then Guilford shall submit such statements and/or claims to Baxter in writing, and if Baxter does not object to such statements and/or claims within [***] of receipt from Guilford, then Guilford shall have been authorized to use such Trademarks, statements and/or claims and the Approved Materials shall be deemed to be amended to include such new items.

10.5 Labeling. Prescribing information and all labeling copy, including all changes therein, to accompany the Product in the Territory on the Product label and in the Product insert shall be the responsibility of Guilford. Notwithstanding the foregoing, Guilford will collaborate with Baxter in determining the appropriate information and statements to be made regarding the description, characteristics and/or use of the Container and will utilize, to the greatest extent possible and appropriate for the Product, statements which are consistent with language used by Baxter for other products packaged in Baxter’s Container.

11. INTELLECTUAL PROPERTY

11.1 Registration of Trademarks. Each party or its Affiliates, as the case may be, will seek to maintain in force during the term of this Agreement, its Trademark(s), at its own cost, in the Territory.

11.2 Ownership of Trademarks. Each party warrants that it or its Affiliate, as the case may be, has full right, title and interest in and to its Trademark(s) and registrations obtained in the Territory. Each party retains all right, title and interest in or to its Trademark(s) and shall not assert any claim to any goodwill, reputation or ownership of the other party’s Trademark(s). All uses of Guilford’s Trademark by Baxter shall inure to the benefit of Guilford, and all uses of Baxter’s Trademarks by Guilford shall inure to the benefit of Baxter. However, neither party shall be obligated to compensate the other for

benefits which may inure as the results of the use of such other party’s Trademark(s).

11.3 License to Use Trademarks. During the term of this Agreement, on a non-exclusive and royalty-free basis, solely for the Territory and solely in connection with the rights and responsibilities of the parties as provided in this Agreement and the Related Agreements, (a) Guilford hereby grants Baxter a license to use its Trademark in connection with the Manufacturing of Product hereunder and in connection with activities permitted pursuant to Sections 10.1 and 10.2; and (b) Baxter hereby grants Guilford a license to use its Trademarks in connection with the registration, promotion, sale and distribution of the Product. Neither party may sublicense this license to the other party’s Trademark(s), except that Guilford may sublicense this license to Guilford’s Affiliates, Licensees and Distributors of Product, without obtaining the prior written consent of Baxter. Any such sublicense granted shall incorporate the terms of this Agreement by reference and shall bind the sublicensee to the provisions of Section 11.

11.4 Trademark Marking. Each party shall approve in writing the proper manner in which its Trademark(s) must be displayed by the other party when used in connection with the terms of this Agreement prior to any use of such Trademark(s), including appropriate indication of each party’s ownership and registration status of its Trademark(s).

11.5 Quality Control. Each party shall use the other party’s Trademark(s) only as specified in Section 11 and in strict accordance with the approved use under Section 11.4. The quality control provisions of the Quality Agreement apply to the use of Trademarks.

11.6 Goodwill of Trademarks. Neither party shall use the other party’s Trademark(s) in any way which will adversely affect the goodwill of the other party’s Trademark(s) and shall exercise the necessary controls to maintain the good reputation and good will of such Trademark(s). A requesting party may periodically inspect, sample and review the other party’s actual use of the Trademark(s) of the requesting party to determine whether the other party is maintaining the goodwill of such Trademark(s). Such inspections, sampling and review shall be undertaken by the other party at the requesting party’s expense and request, but no more than once per year, to which the other party shall promptly respond and cooperate.

11.7 Protection of Trademarks. Each party will in good faith protect its Trademark rights against any infringement or claim that the Trademarks are invalid or infringe the rights of others. Each party will give prompt written notice to the other party of any infringement or possible infringement of the other party’s Trademark(s) during the term of this Agreement. The commencement, strategies, termination and settlement of any action relating to the validity or infringement of each party’s Trademark(s) shall be decided by the party owning such Trademark(s).

11.8 License to Patents and Unpatented Technology. During the term of this Agreement, on a non-exclusive and royalty free basis solely for the Territory and solely to the extent necessary for Baxter to realize its rights and fulfill its obligations under this Agreement, Guilford hereby grants to Baxter a license under all patents, unpatented technology, and other intellectual property rights owned or controlled by Guilford relating to the Product; provided that (i) Baxter shall only have the right to such license, and to use such patents, unpatented technology, and intellectual property rights, if and to the extent necessary for Baxter to realize its rights and fulfill its obligations under this Agreement and the Related Agreements, and that Baxter shall have no right to use any such patents, unpatented technology or intellectual property rights in any other manner or for any other purpose, and (ii) Baxter shall not sublicense the license granted pursuant to this Section 11.8 without Guilford’s prior written consent except in connection with the assignment of this Agreement to an Affiliate in accordance with Section 23.2.

12. GUILFORD LICENSEES AND DISTRIBUTORS

12.1 Notification. If Guilford and/or its Affiliates desire to license Guilford’s rights to market and sell Product in the Territory, Guilford shall first notify Baxter in writing of the identity of the proposed Licensee and the nature of the rights to be licensed.

12.2 Baxter Disapproval Due to Confidentiality Concerns. With respect to those proposed Licensees which will need access to Baxter’s Confidential Information, Baxter shall have the right, within [***] after written notice given by Guilford pursuant to Section 12.1, to disapprove any such proposed Licensee; provided that in order to exercise such right, Baxter must demonstrate to Guilford’s reasonable satisfaction that such proposed Licensee is engaged in, or is preparing to engage in, the development or manufacture of Flexible Containers.

12.3 Other Baxter Disapproval. Baxter shall also have the right, within thirty (30) calendar days after written notice given by Guilford pursuant to Section 12.1, to disapprove any such proposed Licensee if Guilford’s license with such proposed Licensee would create circumstances under which Baxter, by carrying out its obligations under this Agreement, would [***] then in existence in the Territory; provided that Baxter must provide Guilford with documentary evidence of such [***]. Notwithstanding the foregoing, Baxter agrees that it will not, after it signs this Agreement, [***], unless such contract or arrangement would similarly affect Baxter’s other pharmaceutical company customers for pre-mixed products in the Territory. In the event that Baxter shall for any reason become subject to any provision or restriction in any contract or other arrangement which would interfere with Guilford’s utilization of third parties as Licensees in the Territory after the date of this Agreement, this Section 12.3 shall not apply with respect to such contract or arrangement. Without limiting the generality of the foregoing, in no event shall Baxter be entitled to enter into any contract which would interfere with Guilford’s utilization in the Territory of a previously approved Licensee.

12.4 No Unreasonable Disapproval. Baxter will not unreasonably disapprove any proposed Licensee pursuant to Section 12.2 or 12.3.

12.5 Guilford License with Licensees. Guilford shall not license any responsibilities under this Agreement to any proposed Licensee disapproved by Baxter pursuant to Section 12.2 or 12.3.

12.6 Approval [***] Rights. If Baxter does not disapprove a proposed Licensee within the thirty (30) calendar day period set forth in Section 12.2 or 12.3, then such proposed Licensee shall be deemed to be approved by Baxter [***]. Guilford shall have the right to license its rights under this Agreement to any Licensee approved by Baxter in accordance with this Section 12.

12.7 Distributors. Notwithstanding anything to the contrary in this Section 12, there shall be no restriction upon, and Baxter shall not have the right to approve or disapprove, Guilford’s or its Affiliates’ use of any Distributors; provided that Guilford shall not license its rights to market and sell Product to such Distributors except in accordance with this Section 12 and Guilford shall not disclose Baxter’s Confidential Information to any Distributor without Baxter’s prior written consent, which consent shall not be unreasonably withheld or delayed.

12.8 Guilford Continuing Obligations. No license or contract with a Licensee or Distributor shall relieve Guilford of its obligations under this Agreement or any other written agreement entered into by the parties. Furthermore, Guilford shall be responsible for the performance of any Licensee concerning the Product in the Territory and shall indemnify Baxter and its Affiliates with respect thereto as provided in Section 9.2.

13. BULK ACTIVE LOSSES

Baxter shall reimburse Guilford for Bulk Active Losses in connection with the Manufacture of Product pursuant to the provisions of Schedule E.

14. ENVIRONMENT

14.1 Compliance with Laws. Baxter represents and warrants that its operations and activities connected with or relating to the preparation and Manufacture of the Product will comply with all Applicable Laws relating to protection of human health and the environment.

14.2 Indemnification. Baxter agrees to indemnify, defend and hold harmless the Guilford Indemnitees from and against any and all Damages arising out of or relating to a breach of the covenant in Section 14.1, including without limitation (i) any condition in, on, under or near the Facility, and (ii) any condition caused by Baxter, its employees or agents arising out of or in any way connected to any act or omission whatsoever of Baxter and/or its Affiliates, employees or agents. Such duty of indemnification shall include, but not be limited to, claims for injury to person(s) or damage to property, including natural resources, and further including claims for environmental

investigation and/or remediation of property at or around the Facility or any off-site location where material from the Facility may have been transported or otherwise came to be located. Baxter has the option of selecting the attorneys for the defense of claims under this provision and shall be responsible for all costs and expenses of such attorneys. Guilford may elect to have its own attorneys as additional counsel, in which case Guilford shall be responsible for its own attorneys’ fees.

15. CONFIDENTIALITY

15.1 Confidentiality. With respect to the terms of this Agreement and all information furnished by one party to the other party pursuant to or under this Agreement or the Confidentiality Agreement entered into on October 15, 2003, whether or not identified herein as specifically subject to Section 15, (collectively, “Confidential Information”), the party receiving such Confidential Information shall maintain the confidential and proprietary status of such Confidential Information, keep such Confidential Information and each part thereof within its possession or under its control, use all reasonable efforts to prevent the disclosure of any Confidential Information to any other person or entity, and use all reasonable efforts to ensure that such Confidential Information is used only for those purposes specifically authorized by this Agreement. These mutual obligations shall not apply to any information to the extent that such information is:

(i) developed by a receiving party independently of the Confidential Information and not in violation of this Agreement;

(ii) in the public domain at the time of its receipt from the disclosing party or thereafter becomes part of the public domain through no fault of the recipient;

(iii) received without obligation of confidentiality from a third party having the right to disclose such information;

(iv) released from the restrictions of this Section 15.1 by the express written consent of the disclosing party; or

(v) known by the receiving party prior to its receipt from the disclosing party as evidenced by the receiving party’s business records.

15.2 Exceptions. Notwithstanding the provisions of Section 15.1, the parties shall have the right to disclose Confidential Information hereunder to the extent:

(i) required by Applicable Laws to be disclosed (the disclosing party shall, however, give the other party reasonable prior notice thereof and a copy of the disclosure proposed to be made, and will also reasonably cooperate with the other party to prevent or to limit such disclosure and permit the other party to participate in seeking an appropriate protective order);

(ii) required by Securities Laws to be disclosed (the disclosing party shall, however, consult with the other party on the provisions of this Agreement to be redacted in any filings made by the parties with the United States Securities and Exchange Commission or as otherwise required by Applicable Law);

(iii) disclosed to the FDA and/or other governmental agencies by a party in fulfillment of its obligations under this Agreement in order to obtain or maintain FDA approval of the Product, or to obtain or maintain patents (but such disclosure shall only be made pursuant to the provisions of this Agreement, as appropriate);

(iv) necessary to be disclosed to Affiliates, Licensees, Distributors, agents, consultants, and/or other third parties, for the research and development, manufacturing and/or marketing of the Product in the Territory, but only on the condition that the prior written approval of Baxter has been obtained for disclosure to Distributors in accordance with Section 12.7 and such recipients of the Confidential Information shall, prior to such disclosure, agree in writing to be bound by the confidentiality and non-use obligations contained in this Agreement; or

(v) necessary to effect the licenses granted under this Agreement, the Related Agreements or any other written agreement entered into by the parties, but only on the condition that such recipients of the Confidential Information shall, prior to such disclosure, agree in writing to be bound by the confidentiality and non-use obligations contained in this Agreement and any other written agreement entered into by the parties.

15.3 Further Exception. Nothing in this Section 15 shall prohibit a party from disclosing its own Confidential Information to third parties unless such information also constitutes Confidential Information of the other party hereunder or otherwise is contemplated to be kept as confidential in this Agreement or the Related Agreements.

15.4 Export. A recipient of Confidential Information shall adhere to the U.S. Export Administration laws and regulations and shall not export or re-export, to the extent covered by such laws and regulations, any technical data or information received from the disclosing party or the direct product of such technical data or information to any proscribed country listed in the U.S. Export Administration regulations unless properly authorized by the U.S. Government.

15.5 Enforcement. Each party specifically recognizes that any breach by it of this Section 15 may cause irreparable injury to the other party and that actual damages may be difficult to ascertain and in any event, may be inadequate. Accordingly (and without limiting the availability of legal or equitable, including injunctive, remedies under any other provision of this Agreement) each party agrees that in the event of any such breach, notwithstanding the provisions of Section 9 or 23.6 hereof, the other party shall be entitled to seek,

by way of private litigation in the first instance, injunctive relief and such other legal and equitable remedies as may be available.

15.6 Prior Arrangements. The parties acknowledge that they have executed earlier agreements regarding confidential information exchanged pursuant to the Confidentiality Agreement entered into on October 15, 2003. The parties agree that Section 15 of this Agreement shall supersede all provisions in such earlier agreements relating to confidentiality and non-use obligations of the parties with regard to confidential information disclosed under such earlier agreements, except that where such agreements contain confidentiality and non-use obligations which are more restrictive than those set forth in Section 15 of this Agreement then those more restrictive provisions shall continue to apply after execution of this Agreement to confidential information disclosed under such more restrictive provisions.

15.7 Return of Confidential Information. All Confidential Information, including copies thereof, shall remain the property of the disclosing party and, to the extent readily identifiable or clearly identified, and upon request of the disclosing party, shall be returned to it upon expiration or termination of this Agreement, except to the extent retention is necessary to effect the licenses granted under this Agreement or to comply with Applicable Laws.

15.8 Survival. The obligations of confidentiality and non-use referred to in Section 15.1 shall survive until five (5) years after termination or expiration of this Agreement.

16. TERM AND TERMINATION

16.1 Condition Precedent. Both parties’ rights and obligations under this Agreement and the Related Agreements, in particular, those rights and obligations under Section 2 and the CTM Supply Agreement, will be contingent upon the execution by Merck and Baxter of an amendment to the Merck/Baxter Agreement (“the Amendment”), which shall specifically relieve and release Merck from its obligation to purchase from Baxter, and specifically relieve and release Baxter from its obligation to manufacture and supply to Merck, Product for sale in the Territory and otherwise permit Baxter to perform the services and meet its obligations to Guilford hereunder; provided that Baxter shall use reasonable commercial efforts to enter into the Amendment with Merck contemporaneously with this Agreement or as soon as practicable (and in any event within five (5) days) after the date hereof. In the event that Baxter and Merck shall fail to execute the Amendment, either Guilford or Baxter shall have the right to terminate this Agreement and the Related Agreements effective immediately upon written notice to the other, except that Baxter shall have no such right to terminate this Agreement or the Related Agreements if Baxter shall have failed to exercise reasonable commercial efforts to enter into the Amendment as contemplated by the foregoing sentence.

16.2 Term. The initial term of this Agreement shall be effective as of the Effective Date, and shall continue in effect for five (5) years. Thereafter, this

Agreement shall be renewed automatically for consecutive two (2) year periods unless and until either party shall give written notice of termination at least twelve (12) months before the end of the initial term or any renewal thereof.

16.3 Termination for Default or Bankruptcy. This Agreement may be terminated upon written notice by either party to the other party at any time during the term of this Agreement:

(i) if the other party, by act or omission, breaches or defaults on a material term or condition of this Agreement and such party fails to cure such breach within thirty (30) calendar days after written notice by the other party, or if by its nature such breach cannot be cured within such period and such party does not take all reasonable steps which can be taken within such thirty (30) day period to correct or remedy such breach and thereafter diligently pursues such corrective measures, which shall be completed not later than ninety (90) calendar days from the date of such notice, unless the parties shall agree otherwise in writing; or

(ii) upon the filing or institution with respect to the other party of bankruptcy, reorganization, liquidation or receivership proceedings, or upon an assignment of a substantial portion of its assets for the benefit of creditors by the other party; provided, however, in the case of any involuntary proceeding such right to terminate shall only become effective if the other party consents to the involuntary proceeding or such proceeding is not dismissed within ninety (90) calendar days after the filing thereof.

16.4 Termination by Either Party Due to Change in Ownership. Each party shall provide written notice to the other party prior to, or upon first becoming aware of (or, if prior notice is not practicable or is otherwise prohibited, as soon as practicable or after such notice is no longer prohibited), a change of fifty percent (50%) or more of the direct or indirect ownership of, or a change in control of, the notifying party (a “Change in Control”). If the party entitled to notice reasonably believes that such Change in Control will result in material harm to its business as a result of competition between Guilford (and its Affiliates) and Baxter (and its Affiliates) as a result of such Change in Control, then such party shall have the option, within sixty (60) calendar days of such notice, to terminate this Agreement effective immediately after notifying the other party in writing.

16.5 Termination by Guilford if Product Is Withdrawn from the U.S. Market. This Agreement may be terminated or suspended immediately by Guilford if Product shall be withdrawn from the market in the U.S. by Guilford due to (a) serious problems relating to safety or efficacy; or (b) failure to obtain or maintain FDA approval or any other license, permit or authorization required for the Manufacture and sale of the Product in the United States. In case of any termination or suspension of this Agreement under this Section 16.5, Guilford’s sole liability shall be to pay Baxter for Product as provided in

Section 16.8. This Agreement may be reinstated by Guilford for the balance of the existing contract term if Guilford shall reintroduce Product within ninety (90) calendar days following suspension of this Agreement under this Section 16.5; thereafter, this Agreement may be reinstated by Guilford upon agreement by Baxter, which shall not be unreasonably withheld.

16.6 Termination by Guilford in the Event of Relocation of Facility. Guilford shall have the right to terminate this Agreement if the Facility used to Manufacture Product is relocated in accordance with the procedures set forth in this Section 16.6, provided, however, that Guilford’s approval of any such relocation of Facility shall not be unreasonably withheld. Manufacture of Product may not be relocated without at least two (2) years advance written notice to Guilford. Guilford must provide Baxter with written notice of its intent to terminate as set forth herein no later than one hundred eighty (180) calendar days after receipt of Baxter’s notice of its intent to relocate Manufacture of Product to a new facility, which termination shall be effective as of the end of the two (2) year notice period provided by Baxter. In the event that Baxter intends to relocate Manufacturing of Product to another facility, then, in addition to its other obligations set forth herein, Baxter shall, at its own cost, be obligated to meet pre-approval inspection and readiness requirements of the FDA, revalidate equipment and Manufacturing processes, Manufacture new stability batches, conduct required stability studies, reimburse Guilford for any associated reasonable documented direct costs of amending its filings with the FDA, including, but not necessarily limited to, salaries and wages of personnel and out-of-pocket costs, and pay for any other reasonable direct costs associated with the relocation. Baxter will continue to supply Product from the Facility until the new facility is approved by the FDA.

16.7 Termination by Guilford in the Event of Cross-Contamination. If Baxter receives FDA approval to formulate, fill, label, package, warehouse and/or test any chemical entity or product in the Facility that Guilford reasonably considers to present cross-contamination problems for Product Manufactured hereunder as contemplated in the Quality Agreement and Guilford can provide reasonable evidence to this effect to Baxter, then Guilford shall be entitled to terminate this Agreement immediately upon written notice to Baxter, provided that such written notice is given no later than thirty (30) calendar days after Baxter advises Guilford in writing of such FDA approval.

16.8 Dispositions of Inventory Upon Termination or Expiration.

16.8.1 Certain Terminations by Guilford. In the event of any termination of this Agreement by Guilford pursuant to Section 16.3, 16.4, 16.6 or 16.7, then (i) Baxter shall promptly return any remaining inventory of Bulk Active, and package inserts and materials relating to the packaging of the Product which contain Guilford’s or its Affiliates’, Licensees’ or Distributors’ trademarks or trade names, in accordance with Guilford’s written instructions, and Baxter shall pay the freight and insurance costs and shall assume the risk of loss for return of such items until Baxter physically transfers the items to Guilford at Guilford’s designated location; (ii) Guilford shall have the option to

cancel any outstanding Firm Orders for Product, without penalty to Guilford, or to compel Baxter to Manufacture and Deliver Product relating to any outstanding Firm Orders in accordance with the terms of this Agreement; and (iii) Guilford shall have the option to purchase from Baxter all Product which meets the warranties and other requirements of this Agreement, in accordance with the terms of this Agreement.

16.8.2 Certain Terminations by Baxter. In the event of any termination of this Agreement by Baxter pursuant to Section 16.3 or 16.4, then (i) Baxter shall promptly return any remaining inventory of Bulk Active, and package inserts and materials relating to the packaging of the Product which contain Guilford’s or its Affiliates’, Licensees’, or Distributors’ trademarks or trade names, in accordance with Guilford’s written instructions, and Guilford shall pay the freight and insurance costs and assume the risk of loss for return of such items after Baxter physically transfers the items to Guilford’s designated carrier at Baxter’s Facility; (ii) Baxter shall have the option to cancel any outstanding Firm Orders for Product, without penalty to Baxter, or to Manufacture and Deliver Product relating to any outstanding Firm Orders in accordance with the terms of this Agreement; and (iii) Guilford shall purchase from Baxter all Product Manufactured pursuant to Firm Orders which meets the warranties and other requirements of this Agreement, in accordance with the terms of this Agreement.

16.8.3 Termination for Any Other Reason or Expiration. In the event of termination of this Agreement for any reason other than those contemplated in Sections 16.8.1 and 16.8.2, or in the event of expiration of this Agreement, then (i) Baxter shall promptly return any remaining inventory of Bulk Active, and package inserts and materials relating to the packaging of the Product which contain Guilford’s or its Affiliates’, Licensees’, or Distributors’ trademarks or trade names, in accordance with Guilford’s written instructions, and the parties shall share equally the freight and insurance costs and the risk of loss for return of such items after Baxter physically transfers the items to Guilford’s designated carrier at Baxter’s Facility; and (ii) the parties shall cooperate in good faith to either cancel any outstanding Firm Orders for Product, without penalty to either party, or to Manufacture and Deliver Product relating to any outstanding Firm Orders for purchase by Guilford in accordance with the terms of this Agreement.

16.8.4 Destruction and Bulk Active Loss Calculations. Any Product which is not purchased by Guilford under the provisions of Section 16.8.1(iii) shall be destroyed by Baxter in accordance with Section 17, and such Product shall be included in Line F of the Bulk Active Usage Variance form(s) prepared for the relevant Bulk Production Lot pursuant to Schedule E.

16.9 Remaining Obligations. Expiration or termination of this Agreement shall not relieve the parties of any of their respective obligations accruing prior to such

expiration or termination. The covenants and agreements of the parties that require by their terms performance or compliance after expiration or termination of this Agreement shall survive the termination of this Agreement.

16.10 Use of Trademarks. Except as may be required to dispose of Product in existence at the time of expiration or termination of this Agreement, any and all rights of either party to use the Trademark(s) and trade names of the other party for the Product shall end upon termination or expiration of this Agreement.

16.11 Alternative Suppliers. At the expiration of the term of this Agreement, or in the event of early termination of this Agreement by Guilford pursuant to any of Sections 16.3, 16.4, 16.6, 16.7 or 23.1, at Guilford’s written request [***]. The reasonable costs for such technology transfer shall be reimbursed by Guilford if the transfer results from expiration of the Agreement and the costs of the transfer shall be born by Baxter if the transfer results from a material breach by Baxter. Upon the earlier of (i) Guilford’s delivery of notice of termination pursuant to any of Sections 16.3, 16.4, 16.6 or 16.7, (ii) the existence and continuation of a circumstance contemplated by 23.1 for a period of at least ninety (90) days, and (iii) one (1) year prior to the expiration of this Agreement by its terms, Guilford shall be entitled to qualify an alternative supplier (other than Baxter or its Affiliates) of Product, and Guilford’s reasonable activities in connection with such qualification shall not constitute a violation of Section 3.5; provided that Guilford shall not be otherwise relieved of its obligations hereunder, including its obligation under Section 15.

17. WASTE/DISPOSAL

17.1 Baxter Warranty. To the extent of its responsibilities therefor pursuant to this Agreement, Baxter warrants that in connection with handling and/or disposing of (i) any and all Bulk Active, Materials and/or Product, and (ii) those waste streams derived from or associated with Bulk Active, Materials and/or Product, or derived from or associated with the preparation and Manufacturing of the Product, it will comply with all Applicable Laws governing the transportation, unloading, discharge, generation, storage, treatment, disposal, and handling of Bulk Active, Materials and/or Product Manufactured under this Agreement, including, but not limited to:

(i) the Toxic Substance Control Act (P.L. 94-469);

(ii) the Federal Food, Drug and Cosmetic Act, as amended, 21 U.S. Code, Section 301, et. seq.

(iii) the Clean Air Act, 42, U.S.C. Section 7401, et. seq.;

(iv) the Federal Water Pollution Control Act, 33 U.S.C. Section 1251, et. seq.; and

(v) the Resource Conservation and Recovery Act, 42 U.S.C. Section 6901, et. seq.

17.2 Baxter Indemnification. Baxter agrees to defend, indemnify and hold Guilford and its Affiliates harmless from any and all third party claims, losses, damages, costs and expenses, including reasonable attorneys’ fees, arising from the transportation, unloading, discharge, generation, storage, treatment, disposal and handling of waste Bulk Active, Materials and Product and of waste streams derived from or associated with the preparation and Manufacturing of Product hereunder.

17.3 Limitation. The warranty and indemnity set forth in Sections 17.1 and 17.2 shall not apply with respect to handling or disposal of Bulk Active, Product, package inserts and other materials used in Manufacturing of Product to the extent that Guilford is responsible therefor pursuant to this Agreement or otherwise, including Baxter returns of Bulk Active to Guilford for destruction in accordance with the terms of this Agreement.

17.4 Guilford Indemnification. Guilford agrees to defend, indemnify and hold Baxter and its Affiliates harmless from any and all third party claims, losses, damages, costs and expenses, including reasonable attorneys’ fees, arising from the transportation, unloading, discharge, generation, storage, treatment, disposal and handling of Bulk Active, Product, package inserts and other materials used in the Manufacture of Product to the extent that Guilford is responsible therefor pursuant to this Agreement or otherwise, including handling and disposal by Guilford of any and all customer return of Product in accordance with the terms of this Agreement, except to the extent such claims, losses, damages, costs and expenses are covered by Baxter’s indemnification obligations hereunder, including pursuant to Section 17.2.

18. INSURANCE

18.1 Insurance Coverage. Baxter shall, at its sole cost and expense, procure and maintain throughout the life of this Agreement and any extension thereof the following insurance with carriers satisfactory to Guilford:

(i) Statutory Workers Compensation insurance as required by Applicable Law and Employers Liability insurance in an amount not less than [***] for each accident.

(ii) Commercial General Liability insurance for bodily injury or death of persons and/or loss of or damage to property as follows:

(a) General Aggregate [***]

(b) Premises/Operations [***]

(c) Blanket Contractual Liability [***]

(d) Completed Products Operations [***]

(e) Personal & Advertising Injury [***]

(iii) Excess Liability insurance with limits of [***] per occurrence and in the aggregate.

18.2 Evidence of Insurance. Baxter shall provide Guilford with written evidence of such insurance naming Guilford as an additional insured and shall notify Guilford at least [***] prior to any cancellation, non-renewal or material change in such insurance. Baxter may elect to self-insure all or part of the limits described above (including deductibles or retentions); however, such decision to self- insure shall not in any way limit Baxter’s liability with respect to its indemnification obligations under this Agreement and the Related Agreements.

19. REGULATORY MATTERS

19.1 Maintenance of NDA. Guilford shall be responsible for maintaining the NDA and all regulatory filings and submissions associated with the Product in the Territory. Baxter shall provide Manufacturing-related Product information to Guilford as may be reasonably necessary or helpful for Guilford to meet its regulatory obligations to maintain the NDA and file the required reports thereunder in the Territory, including providing such information relating to any changes to the Product Specifications, the Manufacturing process or otherwise pursuant to the Quality Agreement. Each party shall cooperate with the other in making and maintaining all regulatory filings that may be necessary in connection with the performance of this Agreement and the Related Agreements.

19.2 Communications with the FDA. Guilford shall have the responsibility for communications with the FDA relating to the Product. Baxter shall provide Guilford, in a timely manner, all information reasonably in its (or its Affiliates’) control concerning the Product within or outside the Territory reasonably necessary or helpful to meet Guilford’s regulatory obligations.

20. QUALITY AGREEMENT

Simultaneously with the execution of this Agreement, the parties are entering into the Quality Agreement. Quality control testing and other quality related matters shall be governed by, and performed by the parties in accordance with, the terms and conditions of the Quality Agreement. The Quality Agreement is intended to supplement this Agreement, and is hereby incorporated in this Agreement in its entirety, except that in the event of a conflict between any term, condition or provision of this Agreement and any term, condition or provision of the Quality Agreement, the applicable term, condition or provision of this Agreement shall control unless otherwise agreed in writing by the parties.

21. CTM SUPPLY AGREEMENT

Simultaneously with the execution of this Agreement, the parties are entering into the CTM Supply Agreement. Manufacture and supply of clinical trial material and

related matters shall be governed by, and performed by the parties in accordance with, the terms and conditions of the CTM Supply Agreement. The CTM Supply Agreement is intended to supplement this Agreement, and is hereby incorporated in this Agreement in its entirety, except that in the event of a conflict between any term, condition or provision of this Agreement and any term, condition or provision of the CTM Supply Agreement, the applicable term, condition or provision of this Agreement shall control unless otherwise agreed in writing by the parties.

22. SAFETY MATTERS, PRODUCT RETURN AND PRODUCT RECALL

22.1 Safety. Baxter shall comply at all times with all applicable health and safety regulations, policies and procedures relating to the Manufacture of the Product, including the transmission by Baxter to its employees of health and safety information relating to the Product and its manufacture, storage, disposal and transportation

22.2 Adverse Experience Reporting. The parties shall be responsible for reporting adverse experiences and complaints with respect to the Product (including the Bulk Active and the Materials), and for responding to any such reports and complaints, in accordance with the terms and conditions of the Quality Agreement.

22.3 Product Returns. In the event that Baxter (or any of its Affiliates) shall receive any returned goods of Product from a third party, Baxter shall notify Guilford of such returned goods and, at Guilford’s option, either destroy such returned goods or deliver such return goods to Guilford, in each case at Guilford’s expense. Guilford shall not have the right to return any Product received by Guilford as returned goods from third parties to Baxter, other than in accordance with Section 8.2. The parties shall notify each other of, and shall respond to, any customer complaints associated with returned Product in accordance with the terms and conditions of the Quality Agreement.

22.4 Product Recall. Product recalls shall be conducted in accordance with the terms of the Quality Agreement. Each party shall make a permanent, complete and accurate record of all costs incurred by it in connection with any Product recall, a copy of which shall be delivered to the other as soon after the completion of such recall or seizure as practically may be done. If the cause of or reason for said recall or seizure arises from or is attributable to Baxter’s negligence or breach of this Agreement, Baxter shall, in addition to its other obligations hereunder, reimburse Guilford for (i) all Bulk Active incorporated into the recalled or withdrawn Product at the price per kilo set forth in Section 8.2(ii), (ii) the Manufacturing Fees paid by Guilford for the recalled or withdrawn Product calculated on a FIFO basis, and (iii) all reasonable direct expenses including, but not necessarily limited to, salaries and wages of personnel and out-of-pocket costs which are incurred by Guilford and its Affiliates in connection with such recall and documented and invoiced by Guilford to Baxter. If the cause of or reason for said recall or seizure is directly attributable to Guilford’s negligence or breach of this Agreement, Guilford shall, in addition to its other obligations hereunder, reimburse Baxter for all reasonable direct expenses including, but not necessarily limited to,

salaries and wages of personnel and out-of-pocket costs which are incurred and documented by Baxter in connection with such recall and invoiced by Baxter to Guilford. If Baxter and Guilford cannot agree which party is at fault, then an independent technical expert, acceptable to both, will be designated to make the determination. The so designated technical expert shall not be an employee, consultant, officer, director or shareholder of or otherwise associated with either party or an Affiliate of either party. The technical expert’s determination shall be, in the absence of fraud or manifest error, binding and conclusive upon the parties.

23. MISCELLANEOUS

23.1 Force Majeure. Except as otherwise contemplated in Section 3.4, Section 16.11 and this Section 23.1, neither party shall be liable to the other for the failure or delay in performing any obligation under this Agreement if and to the extent such failure or delay is due to causes beyond the reasonable control of the affected party, including (i) acts of God; (ii) weather, fire or explosion; (iii) war, invasion, riot or other civil unrest; (iv) governmental laws, orders, restrictions, actions, embargos or blockades; (v) national or regional emergency; (vi) injunctions, strikes, lockouts, labor trouble or other industrial disturbances; (vii) shortage of adequate fuel, power, Materials, Bulk Active or transportation facilities; or (viii) any other event which is beyond the reasonable control of the affected party; provided that the party affected shall promptly notify the other party, in writing, of the force majeure condition and shall exert reasonable efforts to eliminate, cure or overcome any such causes, at its own cost, and to resume performance of its obligations as soon as possible. After notice has been given by the affected party to the other party of the force majeure event, the parties will discuss and attempt to resolve the issues related to the force majeure event on terms and conditions agreeable to both parties. Notwithstanding the foregoing, if as the result of a force majeure event Baxter cannot supply Product to Guilford for a period exceeding one hundred twenty (120) calendar days, then Guilford shall be entitled to terminate this Agreement upon written notice to Baxter and such termination shall be effective immediately.

23.2 Assignment. Neither this Agreement nor the rights and obligations of the parties hereunder may be assigned, delegated or otherwise transferred by either party without the prior written consent of the other party, which shall not be unreasonably withheld or delayed, except (i) as contemplated in Section 12.6, and (ii) that either party shall have the right to assign this Agreement, or delegate its rights and obligations hereunder, in whole or in part, to any Affiliate of such party; provided, that such assigning party shall remain primarily responsible for its obligations hereunder. In addition to the foregoing, and notwithstanding anything to the contrary therein, Guilford shall have the right to grant a security interest in, or to collaterally assign, this Agreement to the extent, but only to the extent, required in connection with the financing arrangements described in Schedule I hereto, and such grant or assignment shall include the right of the grantee or assignee to foreclose upon such security interest or collateral upon default by Guilford and, in such event, to sell, assign, license or otherwise dispose of such security interest or

collateral to a third party; provided, however, that any such sale, assignment, license or other disposal shall be subject to the provisions of Section 16.4 to the extent applicable. Any attempted assignment of this Agreement in violation of this Section 23.2 shall be void. Notwithstanding the foregoing, the prohibition on assignment set forth in this Section 23.2 shall not apply to any assignment that constitutes a Change in Control, which shall be governed by the provisions of Section 16.4.

23.3 Severability. In the event any one or more of the provisions contained in this Agreement should be held invalid, illegal or unenforceable in any respect in any jurisdiction, such provisions shall be ineffective to the extent (and only to the extent) of such invalidity or unenforceability in such jurisdiction and the validity, legality and enforceability of the remaining provisions contained herein shall not in any way be affected or impaired thereby, unless the absence of the invalidated provision(s) adversely affects the substantive rights of the parties. The parties agree to replace any invalid, illegal or unenforceable provision(s) or parts thereof by new provision(s) which closely approximate the result intended by the parties.

23.4 Notices. All notices or other communications which are required or permitted hereunder shall be in English and in writing and shall be sufficient and deemed given on the same business day if delivered personally, on the same business day if sent by facsimile (and promptly confirmed by personal delivery, registered or certified mail, or overnight courier), on the business day after dispatch is sent by nationally recognized overnight courier which provides a delivery receipt, or on the third business day following the date of mailing if sent by registered or certified mail, postage prepaid, return receipt requested, addressed as follows:


		if to Guilford:		Guilford Pharmaceuticals Inc.
				6611 Tributary Street
				Baltimore, Maryland 21224
				Attention: Senior Vice President - Technical Operations
				Fax Number: (410) 631-6899

		with a copy to:		Guilford Pharmaceuticals Inc.
				6611 Tributary Street
				Baltimore, Maryland 21224
				Attention: General Counsel
				Fax Number: (410) 631-5598

		if to Baxter:		Baxter Healthcare Corporation
				Route 120 & Wilson Rd.
				Round Lake, IL 60073
				Attention: General Manager
				Global Drug Delivery
				Fax Number: 847-270-3410


with a copy to:		Baxter Healthcare Corporation
		Highway 221 North
		Marion, North Carolina 28752
		Attention: Plant Manager
		Fax Number: 704-756-4821

or to such other address as the party to whom notice is to be given may have furnished to the other party in accordance herewith.

23.5 Applicable Law. This Agreement shall be governed by and construed in accordance with the laws of the State of Delaware without reference to any rules of conflict of laws or renvoi.

23.6 Alternative Dispute Resolution. The parties will attempt to settle any claim or controversy arising out of this Agreement through good faith negotiations and in the spirit of mutual cooperation. If those attempts fail, except as otherwise contemplated in this Agreement or the Related Agreements (including without limitation Sections 7.2, 8.2 and 15.5 of this Agreement) and subject to the provisions of this Section 23.6, such dispute between the parties will be mediated by a mutually acceptable mediator to be chosen by the parties within [***] after written notice by the party demanding mediation. The disputes referred to in Sections 7.2, 8.2 and 15.5 of this Agreement, or elsewhere in this Agreement or the Related Agreements, shall be settled as specified therein. Neither party may unreasonably withhold consent of the selection of the mediator and the parties will share the costs of the mediation equally. The parties may agree to replace mediation with some other form of Alternative Dispute Resolution (“ADR”), such as neutral fact-finding, mini-trial or arbitration. Any dispute which cannot be resolved by the parties through mediation or another form of ADR within [***] of the date of the initial written demand for mediation may then be submitted to the Federal or state courts, as appropriate, for resolution. The use of any ADR procedures with respect to unresolved disputes will not be construed under the doctrine of latches, waiver or estoppel to affect adversely either party’s right to assert any claim or defense. Notwithstanding the foregoing, nothing in this Section 23.6 will prevent either party from resorting to judicial process at any time if (i) good faith efforts to resolve the dispute under these procedures have been unsuccessful and such party reasonably believes that good faith efforts to continue to attempt to resolve the dispute under these procedures would be unsuccessful (irrespective of whether the [***] period contemplated herein has expired), or (ii) injunctive relief from a court is necessary to prevent serious and irreparable injury to one party or to others.

23.7 Entire Agreement. This Agreement, together with the Related Agreements, contains the entire understanding of the parties with respect to the subject matter hereof and cancels all previous agreements, negotiations, commitments and writing in respect to the subject matter hereof except for the confidentiality agreements between the parties to the extent referred to in Section 15.3.

23.8 Amendment. This Agreement may be amended, or any term hereof modified, only by a written instrument duly executed by both parties hereto.

23.9 Subcontracting. Baxter shall not contract with a third party to undertake any portion of the Manufacture of Product without Guilford’s prior written consent.

23.10 Headings. The captions to the Sections hereof are not a part of this Agreement, but are merely guides or labels to assist in locating and reading the Sections hereof.

23.11 Independent Contractors. It is expressly agreed that Baxter and Guilford shall be independent contractors and that the relationship between the two parties shall not constitute a partnership, joint venture, agency or similar relationship. Neither Baxter nor Guilford shall have the authority to make any statements, representations or commitments of any kind, or to take any action, which shall be binding on the other, without the prior written consent of the other party to do so.

23.12 Waiver. The waiver by either party hereto of (i) any right hereunder; (ii) the failure to perform by the other party; or (iii) a breach by the other party shall not be effective unless set forth in a writing signed by the party against who such waiver is to be enforced, and shall not be deemed a waiver of any other right hereunder or of any other breach or failure by said other party, whether of a similar nature of otherwise.

23.13 Counterparts. This Agreement may be executed in two counterparts, each of which shall be deemed an original, but which together shall constitute one and the same instrument. Each party may execute this Agreement on a facsimile of the Agreement and facsimile signatures of authorized signatories of either party shall constitute due execution and delivery of this Agreement.

23.14 Successors and Assigns. The terms and conditions of this Agreement shall be binding upon and shall inure to the benefit of the parties hereto and their respective successors and permitted assigns.

23.15 Execution. Each party agrees to execute such further papers, agreements, documents, instruments and the like as may be necessary or desirable to effect the purpose of this Agreement and to carry out its provisions.

23.16 Remedies. Except as may be otherwise expressly provided herein, no remedy referred to in this Agreement is intended to be exclusive, but each shall be cumulative and in addition to any other remedy referred to in this Agreement or otherwise available under law.

23.17 Review with Counsel. Each of the parties agrees that it has had the opportunity to review this Agreement with its legal counsel. Accordingly, the rule of construction that any ambiguity in this Agreement is to be construed against the drafting party shall not apply.

23.18 Benefit. Except as otherwise provided in Section 23.19, nothing in this Agreement or the Related Agreements, express or implied, is intended to or shall confer on any person other than the parties hereto, and their respective successors and permitted assigns, any rights, remedies, obligations or liabilities under or by reason of this Agreement or the Related Agreements.

23.19 Merck/Baxter Agreement. Guilford (but only as to (ii) and (iii)) and Baxter (but only as to (i)A and (i)B and (iv)) hereby acknowledge and agree (and represent, warrant and covenant to Merck and to each other) that effective as of the Effective Date of this Agreement (i) (A) Merck and its Affiliates shall be relieved and released from its obligation to purchase from Baxter, and Baxter shall be relieved and released from its obligation to manufacture and supply to Merck and its Affiliates, Product for sale in the Territory, and (B) with respect to the Territory, both Merck and Baxter have waived any provisions of exclusivity, noncompetition or the like in the Merck/Baxter Agreement that would limit Guilford’s ability to directly contract with Baxter to purchase Product for sale in the Territory, (ii) pursuant to the letter agreement (the “Letter Agreement”) dated as of the Effective Date of this Agreement between Guilford, Merck and Merck, Sharp & Dohme (Ireland) Limited, an Affiliate of Merck (“MSD Ireland”), Merck and its Affiliates have been relieved and released from the obligation to supply to Guilford, and Guilford and its Affiliates have been relieved and released from the obligation to purchase from Merck, Product for sale in the Territory (except for the sale and purchase of certain inventory pursuant to the Letter Agreement), (iii) from and after the Effective Date, all Product manufactured and supplied by Baxter to Guilford shall not be labeled using the name “Merck” or any trademark, trade name or other designation of Merck or its Affiliates, unless otherwise permitted under the Supply Agreement dated as of October 28, 2003 by and between Guilford and MSD Ireland or a certain Transition Services Agreement between Guilford and Merck, and (iv) this Agreement does not materially adversely affect Merck or its Affiliates or its or their business or interest with respect to Baxter and Baxter’s ability to make the Product for Merck outside the United States in the Territory as set forth in the Manufacturing and Supply Agreement and the related agreements, as amended, between Merck and Baxter. Merck and its Affiliates shall be deemed a third party beneficiary to the provisions contained in this Section 23.19.

1IN WITNESS WHEREOF, the parties have caused this Agreement to be executed by their duly authorized representatives as of the date first set forth above.


Guilford Pharmaceuticals Inc.		Baxter Healthcare Corporation

By: /s/ John P. Brennen		By:/s/ David F. Drohan

Name: John P. Brennen		Name:David F. Drohan

Title: Senior Vice President,		Title: Senior Vice President,
Technical Operations		Medication Delivery

Date: July 1, 2004		Date: July 1, 2004

SCHEDULE C
MANUFACTURING FEES

250 mL Product Packaging Configuration


				Fee per Unit 1
		Minimum	Fee per Unit	Unit per Box 8
	Order Quantity	Codes per	18 Units per	Boxes per
Tier	per Code (units)	Order	Shipper	Shipper
		[***]

100 mL Product Packaging Configuration


		Fee per Unit 1
		Unit per Box
	Order Quantity	24 Boxes per
Tier	per Code (units)	Shipper
	[***]

SCHEDULE D
PRODUCT DEFINITIONS

100mL Single Port / U.S.


Quantity		Description
24		Filled/printed PL2408 single port IV containers each within a printed foil overpouch

24		Intermediate single unit white paperboard shipping cartons with applied labels (each containing one foil overpouched container).

1		Labeled Master Shipper carton (each containing 24 intermediate single unit shipping cartons

35		Master Shippers (840 units) / pallet

250mL Single Port / U.S.


Quantity		Description
8		Filled/printed PL2408 single port IV container each within a sealed printed foil overpouch.

8		Intermediate Single unit brown shipping cartons (corrugated) with applied labels (each containing one foil overpouched container).

1		Labeled Master Shipper carton each containing 8 intermediate single unit preprinted (brown corrugated) shipping cartons

45		Master Shippers (360 units) / pallet

SCHEDULE E
BULK ACTIVE LOSSES

A. General

1. The term “Bulk Active Loss” shall mean the destruction of Bulk Active during the process of Manufacture such that the Bulk Active cannot be used to Manufacture usable Product and must be discarded.

2. The term “Unit Yield per Gram” means the number of units of finished Product yielded from each gram of Bulk Active used in the Manufacture of such Product.

3. Bulk Active Losses are an expected outcome of Manufacturing. Baxter shall use reasonable efforts, at its own cost, to minimize Bulk Active Losses, and in any event shall at all times Deliver to Guilford the Minimum Allowable Unit Yield per Gram of Bulk Active (the “Minimum”), which Minimum shall be determined [***]. Baxter and Guilford shall collaborate to identify opportunities for minimizing Bulk Active Losses in the Manufacture of Product. Guilford may inspect Baxter’s records relating to the calculations referred to in this Schedule E in accordance with the provisions specified in the Quality Agreement.

B. Compensation for Bulk Active Losses. Baxter shall pay Guilford at the rate $[***] per kilo of Bulk Active consumed in any Manufacture of Product rendering a Bulk Active Loss (which price shall be subject to adjustment as set forth in Section 8.2(ii) of this Agreement), for the amount of Bulk Active utilized which does not meet the Minimum as established in Section A(3) above and updated annually.

C. Reporting. The Unit Yield per Gram will be calculated by Baxter for each Bulk Production Lot.

D. Invoicing. Guilford shall invoice Baxter for the Bulk Active Loss for each Bulk Production Lot not meeting the Minimum that has been established in accordance with Section A(3) above.

E. Payment. Payment of the invoice issued pursuant to Section D shall be made by Baxter within thirty (30) calendar days after delivery of the invoice by Guilford.

F. Other Bulk Active Losses. If the reconciliation of physical inventory counts to Baxter’s books and perpetual records made pursuant to Section 6.3 of this Agreement indicates a loss of Bulk Active in addition to that which is accounted for pursuant to this Schedule E, then Baxter shall pay Guilford at the rate per kilo set forth in Section 8.2(ii) for the amount of such lost Bulk Active exceeding [***].

BULK ACTIVE LOSS FORM

Lot Number:
Code Number:
Manufacture Date:


		ACCOUNTABILITY:	Actual
A		Total Bulk Active used in Bulk Production Lot		Grams

B		Total volume in Bulk Production Lot		Liters

	Unit Count Reconciliation:
		Released Product units		# of units
+		Units required for quality control release testing		# of units
+		Units requested by Guilford		# of units
+		First of Code Batch testing units		# of units
+		Units used in ongoing [***] testing		# of units

C	Total number of units accounted for			# of units

	UNIT YIELD per GRAM of Bulk Active:

D	Unit Yield per Gram = C/A			Units/Gram

	MINIMUM UNIT YIELD per GRAM of ACTIVE:

	Minimum Allowed 250 mL Unit Yield per Gram of Active		[***]	Units/Gram
	Minimum Allowed 100 mL Unit Yield per Gram of Active		[***]	Units/Gram

	Units Short per Gram

E	Minimum Unit Yield – Actual Unit Yield (D)			Units/Gram

	Units Short

F	Total Bulk Active used (A) x Units Short per Gram (D)			Units

	Grams of Active Lost

G	Units Short (F) x grams of Active per bag			Grams

		Grams of Active per 250 mL Unit	[***]	Grams/Bag
		Grams of Active per 100 mL Unit	[***]	Grams/Bag

SCHEDULE F
INVOICING REQUIREMENTS

Invoices must contain the following information


		Quantity of units shipped
		Rx Number
		Bulk Production Lot Number
		Filling Production Lot Number
		Date of Manufacture
		Guilford’s Purchase Order Number
		Ship to Address
		Date of Shipment

Invoices are to be sent to:


		Guilford Pharmaceuticals Inc
		Accounts Payable
		6611 Tributary Street
		Baltimore, MD 21224

SCHEDULE I
FINANCING ARRANGEMENTS

In order to finance its acquisition of the rights to the Product in the Territory from Merck, Guilford entered into a revenue interest financing arrangement with Paul Royalty Fund, L.P. and Paul Royalty Fund II, L.P. (collectively, “PRF”) pursuant to a revenue interest assignment agreement. Under Guilford’s arrangement with PRF, and subject to the terms and conditions thereof, PRF is entitled to receive a certain percentage of Guilford’s annual net sales of the Product. In order to secure its obligations to PRF, Guilford granted PRF a security interest in the assets related to the Product.


Delaware (State or other jurisdiction of incorporation or organization)		52-1841960 (IRS Employer Identification No.)

6611 Tributary Street Baltimore, Maryland (Address of principal executive offices)		21224 (Zip Code)


Class		Outstanding November 5, 2004

Common Stock, $.01 par value		44,443,457


Exhibit No.		Description
3.01D		Certificate of Amendment of Amended and Restated Articles of Incorporation, as Amended (previously filed as an exhibit to the Company’s Form 8-K filed on May 20, 2004).

10.41		Employment Agreement, dated June 17, 2004, between the Company and William F. Spengler.+

10.42		Manufacturing and Supply Agreement, dated July 1, 2004, between the Company and Baxter Healthcare Corporation (filed herewith).*

10.43		Purchase Option Agreement, dated June 17, 2004, by and among Guilford Pharmaceuticals Inc., SNDC Holdings LLC and Symphony Neuro Development Company (previously filed as an exhibit to the Company’s Form 8-K filed on June 21, 2004).

10.44		Novated and Restated Technology License Agreement, dated June 17, 2004, between GPI NIL Holdings, Inc., Guilford Pharmaceuticals Inc., Symphony Neuro Development Company and SNDC Holdings LLC (previously filed as an exhibit to the Company’s Form 8-K/A filed on November 24, 2004).*

31.01		Certification of Chief Executive Officer Pursuant to Rule 13a-14(a) under the Securities Exchange Act of 1934 as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (filed herewith).

31.02		Certification of Chief Financial Officer Pursuant to Rule 13a-14(a) under the Securities Exchange Act of 1934 as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (filed herewith).

32.01		Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.+

32.02		Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.+


		GUILFORD PHARMACEUTICALS INC.

		/s/ Craig R. Smith, M.D.
		Craig R. Smith, M.D.
		Chairman of the Board and Chief Executive Officer

Date: November 24, 2004

		/s/ William F. Spengler
		William F. Spengler
		Executive Vice President and Chief Financial Officer

Date: November 24, 2004

+		Previously filed as an exhibit to this Form 10-Q.

*		Confidential treatment was granted for certain portions of this agreement. These confidential portions have been omitted and were filed separately with the Commission.

1.		DEFINITIONS

		Unless specifically set forth to the contrary herein, the following capitalized terms, whether used in the singular or plural, shall have the respective meanings set forth below:

	1.1		The term “Baxter” as used hereinafter shall mean Baxter and its Affiliates.

	1.2		The term “Affiliate” of Guilford or Baxter shall mean any corporation or business entity which controls, is controlled by or is under common control with Guilford or Baxter, as the case may be. A corporation or business entity shall be deemed to control another corporation or business entity if it owns, directly or indirectly, fifty percent (50%) or more of the securities or other ownership interests representing the equity, the voting stock or general partnership interest of such corporation or business entity.

	1.3		The term “Act” shall mean the U.S. Federal Food, Drug, and Cosmetic Act, 21 U.S.C. § 301 et seq., as amended, and the regulations promulgated thereunder, as amended from time to time.

	1.4		The term “Applicable Law” shall mean any United States (including federal, territorial, state, municipal and local) statute, law, ordinance, rule, regulation, administrative interpretation, order, writ, injunction, judicial decision, decree or other requirement of any Governmental Authority.

	1.5		The term “Bulk Active” shall mean the pharmacologically active ingredient N-(Butylsulfonyl)-O-[4-(4-piperindinyl)butyl]-L- tyrosine monohydrochloride monohydrate, also known as “tirofiban hydrochloride”, and meeting the specifications specified in Schedule A.

	1.6		The term “Bulk Active Specifications” shall mean the specifications and test methods for Bulk Active, specified in Schedule A, as they may be modified from time to time by Guilford.

	1.7		The term “Bulk Production Lot” shall mean the total quantity of solution which has been mixed in one tank during the process of Manufacturing Product.

	1.8		The term “Bulk Production Lot Number” shall mean the unique number assigned by Baxter to each Bulk Production Lot.

	1.9		The term “Calendar Month” shall mean each month of the Calendar Year beginning with the first date of that month and ending with the last date of that same month.

	1.10		The term “Calendar Quarter” shall mean each period of three (3) consecutive Calendar Months ending March 31, June 30, September 30 and December 31, as the case may be.

	1.11		The term “Calendar Year” shall mean the period of January 1 to December 31.

	1.12		The term “cGMPs” shall mean the current Good Manufacturing Practices as specified in the United States Code of Federal Regulations or in applicable regulations promulgated or issued by the FDA.

	1.13		The term “Container” and “Flexible Container” shall mean Baxter’s container, the description and specifications of which are set forth in the Quality Agreement and in Baxter’s FDA filings, which is either a 250-mL or a 100-mL flexible non-PVC container having a single administration port containing PVC and wrapped in an overpouch.

	1.14		The term “Container Drug Master File” or “CDMF” shall mean a separate filing with the FDA consisting of confidential detailed information about the facilities, processes and/or materials used in the manufacturing, processing, testing and/or storing of the Container. Information contained in a CDMF shall be used to support filings made to the FDA to obtain and maintain registration of the Product.

	1.15		The term “CPI” shall mean the U.S. Consumer Price Index as published by the U.S. Department of Labor.

	1.16		The term “CTM Supply Agreement” shall mean the Clinical Trial Material Supply Agreement dated as of the date hereof between Baxter and Guilford for the Manufacture and supply by Baxter to Guilford of batches of clinical trial material.

	1.17		The term “Deliver”, “Delivered”, “Delivering” or “Delivery” by Baxter shall mean the act of Baxter in making complete shipment(s) of Product available to Guilford at Baxter’s Facility for immediate shipment and transportation by Guilford in accordance with Section 5.2, which Product shall be completely Manufactured, packaged and ready for administration.

	1.18		The term “Distributors” shall mean those persons and/or entities engaged by Guilford and/or Guilford’s Affiliates to distribute Product in the Territory on behalf of Guilford and its Affiliates, but shall not include Licensees.

	1.19		The term “Facility” shall mean that portion of Baxter’s facilities located at Highway 221 North Marion, North Carolina, used in the Manufacturing of the Product.

	1.20		The term “FDA” shall mean the United States Food and Drug Administration and its successors.

	1.21		The term “FIFO” shall mean first-in, first-out.

	1.22		The term “Filling Production Lot” shall mean a quantity of solution taken from a Bulk Production Lot and filled into Containers.

	1.23		The term “Filling Production Lot Number” shall mean (i) with respect to the first Filling Production Lot filled from a Bulk Production Lot, the Bulk Lot Production Number for such Bulk Product Lot, and (ii) with respect to each Filling Production Lot filled from the same Bulk Production Lot thereafter, a unique number assigned by Baxter to such Filling Production Lot.

	1.24		The term “Firm Order” shall mean a binding commitment in writing and evidenced by a Purchase Order made by Guilford to purchase Product from Baxter pursuant to Section 3.1.2.

	1.25		The term “Governmental Authority” shall mean any United States (including federal, territorial, state, municipal and local) governmental authority, quasi-governmental authority, instrumentality, court, government or self-regulatory organization (including any national or international securities exchange and The NASDAQ Stock Market), commission, tribunal or organization or any regulatory, administrative or other agency (including the FDA), or any political or other subdivision, department or branch of any of the foregoing.

	1.26		The term “Licensees” shall mean those persons and/or entities to which Guilford and/or Guilford’s Affiliates shall, subject to Section 12, license its rights to market and sell the Product in the Territory.

	1.27		The term “Lot Numbers” shall mean, collectively, the Bulk Production Lot Numbers and the Filling Production Lot Numbers.

	1.28		The terms “Manufacture”, “Manufacturing” and “Manufactured” shall mean all operations of Baxter and its successors, permitted assigns and permitted subcontractors in the acquisition of Materials and the formulation of Product from Bulk Active, and in filling, labeling, packaging, warehousing and quality control testing of Product.

	1.29		The term “Manufacturing Fee” shall mean the fee per unit paid by Guilford to Baxter for Product Manufactured in accordance with the terms of this Agreement.

	1.30		The term “Materials” shall mean all raw materials, excipients, components, packaging materials (including the Container), and other items necessary for the Manufacture of Product as supplied by Baxter other than the Bulk Active, package inserts and any other items which are supplied by Guilford to Baxter.

	1.31		The term “Merck/Baxter Agreement” means the Manufacturing and Supply Agreement dated as of April 15, 1995, as amended, by and between Merck and Baxter.

	1.32		The term “NDA” shall mean the New Drug Application relating to Product filed in accordance with FDA regulations.

	1.33		The term “Parametric Release” shall mean a review and comparison of sterilization records to validated parameters to effect release of a Filling Production Lot of Product in lieu of routine end product sterility testing.

	1.34		The term “Product” shall mean AGGRASTAT® Pre-Mixed Injection in either (i) a 0.05 mg/mL bulk active in 0.9% normal saline and packaged as a terminally steam sterilized pre-mixed intravenous (I.V.) solution in Container, in package size and meeting the Product Specifications specified in Schedule A, which comprise a 12.5 mg dosage, 250 mL diluent volume pharmaceutical form (the “250 mL Product”), or (ii) a 0.05 mg/mL bulk active in 0.9% normal saline and packaged as a terminally steam sterilized pre-mixed intravenous (I.V.) solution in Container, in package size and meeting the Product Specifications specified in Schedule A, which comprise a 5.0 mg dosage, 100 mL diluent volume pharmaceutical form (the “100 mL Product”).

	1.35		The term “Product Specifications” shall mean the specifications and test methods for Product as specified in Schedule A, as they may be modified from time to time in accordance with the Quality Agreement.

	1.36		The term “Quality Agreement” shall mean the Quality Agreement dated as of the date hereof by and between Baxter and Guilford, together with the exhibits thereto, that provides the details on the responsibilities of the technical and quality activities required to Manufacture the Product.

	1.37		The term “Related Agreements” shall mean, collectively, the Quality Agreement and the CTM Supply Agreement.

	1.38		The term “Securities Laws” shall mean the United States Securities Act of 1933, as amended, the United States Securities Exchange Act of 1934, as amended, and any other similar law or regulation of a United States Governmental Authority, or any successor to any such laws or regulations, together with any rules, regulations or listing standards or agreements of any national or international securities exchange or The NASDAQ Stock Market, as generally applicable.

	1.39		The term “Territory” shall mean the United States of America and its territories and possessions, including without limitation the Commonwealth of Puerto Rico, Guam and the U.S. Virgin Islands.

	1.40		The term “Trademarks” shall mean, collectively, Baxter’s United States registered trademarks for the Container and Guilford’s United States registered trademark for Product.

	2.1		Engagement of Baxter. Guilford hereby engages Baxter to Manufacture the Product at the Facility, subject to the conditions and terms set forth in this Agreement and the Related Agreements. Baxter accepts such engagement to Manufacture the Product and to perform such other acts as are provided in this Agreement and the Related Agreements.

	2.2		Permits, Licenses and Authorizations. Except as otherwise agreed by the parties in writing, Baxter shall be responsible for obtaining, at its cost, all the necessary permissions, licenses and approvals for the Manufacture of Product in the Facility for distribution in the Territory.

	3.1.1		Forecasts. In order to assist Baxter in its production planning, at least [*] before the beginning of each Calendar Quarter, Guilford shall provide to Baxter a statement of its estimated purchase requirements (“Estimated Requirements”) and expected Delivery dates for Product for the [*] next succeeding such Calendar Quarter. It is understood that such Estimated Requirements shall not constitute commitments to purchase Product or Firm Orders.

	3.1.2		Firm Orders. At least [***] days prior to the beginning of each Calendar Quarter, Guilford shall place a Firm Order for its requirements and requested Delivery dates of Product for such Calendar Quarter. Firm Orders shall be placed in amounts equal to the Filling Production Lot sizes, multiplied by whole number increments of the applicable minimum order quantities as set forth on Schedule C. Firm Orders for Product in such Calendar Quarter shall not be for less than seventy percent (70%) nor more than one hundred thirty percent

			(130%) of Guilford’s Estimated Requirements of Product for such Calendar Quarter as most recently updated. Notwithstanding the foregoing, Baxter shall use reasonable efforts to comply with any subsequent changes in such Firm Orders, but shall not be held liable for its inability to do so. Guilford shall limit the number of requested Delivery dates to no more than two (2) per Calendar Month.

	3.1.3		Initial Forecast and Firm Order. Attached hereto as Schedule G is Guilford’s initial Firm Order for its requirements of Product and requested Delivery dates for the period beginning on the Effective Date and ending on December 31, 2004, as well as Guilford’s Estimated Requirements and estimated Delivery dates for the next succeeding two (2) Calendar Quarters beginning October 1, 2004. Guilford shall deliver Estimated Requirements and estimated Delivery dates for the [*] beginning January 1, 2005 on or before [*].

	3.2		Satisfaction of Firm Orders. Baxter shall confirm the receipt of each Firm Order within [*] of its receipt thereof. Subject to Section 23.1, Baxter shall meet Guilford’s requested Delivery dates. Baxter shall satisfy each Firm Order by Delivering not less than [] and not more than [] of the quantity of Product ordered by Guilford in each Firm Order to Guilford. Deliveries of Product shall be made on the date specified in the Firm Order, but in no event more than [] in advance of the date specified in the Firm Order without Guilford’s prior written approval. Baxter shall notify Guilford at least [**] prior to actual Delivery of Product if Baxter is not Delivering Product to Guilford on the requested Delivery date.

	3.3		Terms. Firm Orders will be made on the form of purchase order attached hereto as Schedule H or in such other form as Baxter and Guilford shall agree in writing from time to time (a “Purchase Order”), provided that the terms and conditions of this Agreement shall be controlling over any terms and conditions included in any such Purchase Order used in ordering Product.

	3.4		Short Supply of Materials and/or Resources. In the event that the Materials and/or resources required to Manufacture Product are in short supply, Baxter shall notify Guilford of such shortage as soon as possible and shall allocate to Guilford a proportionate share of the available amount of such Materials and/or resources (as existing as of the time of such shortage and going forward) required for Manufacture of Product hereunder based upon Guilford’s projected requirements for Product hereunder, as compared to the projected requirements of other customers of Baxter who require use of such Materials or resources, for the ensuing [***] period.

	3.5		Exclusive Manufacture and Supply. Except as otherwise contemplated in this Agreement, during the term and subject to the provisions of this Agreement and the Related Agreements, Baxter shall supply Product exclusively to Guilford in the Territory, and Guilford shall purchase exclusively from Baxter quantities of Product equal to Guilford’s needs for the Territory.

	4.1		Manufacturing Fees. The Manufacturing Fees charged by Baxter to Guilford for Product Manufactured hereunder shall be determined and paid as set forth in this Section 4 and in Schedule C. Guilford will purchase a minimum of one hundred thousand (100,000) units of Product during each Calendar Year of this Agreement, except the first Calendar Year (the “First Calendar Year”). During the First Calendar Year, the minimum requirement shall be 75,000 units and shall be reduced by the number of units that Guilford purchased from Merck during 2004. The 100,000 units may be any combination of 100 mL Product and 250 mL Product units [***]. If Guilford desires to have a different packaging configuration than shown on Schedule D, then the parties shall negotiate in good faith applicable Manufacturing Fees for such configuration.

	4.2		Application of Prices for each Tier. The Manufacturing Fees shown in Schedule C correspond to an individual unit of Product depending on whether it is a 250 mL Product or a 100 mL Product. Firm Orders shall be placed by Guilford in whole number increments of the Order Quantities set forth in the tables provided in Schedule C. Baxter shall invoice Guilford at the Manufacturing Fee corresponding to applicable pricing tier reflected on Schedule C for each such unit.

	4.3		Underlying Assumptions. The Manufacturing Fees set forth herein are based upon the following key assumptions:

	(ii)		In the event either Guilford or Baxter shall desire to make any change in any label for the Product (including without limitation the bag label, the intermediate carton label and the case label) during the term of this Agreement, the parties shall meet to negotiate the additional costs to be incurred by Baxter, which costs shall be allocated between Guilford and Baxter as set forth in this Section 4.3(ii). With respect to label changes by Guilford, including both discretionary changes and changes required by the FDA or Applicable Law, Guilford may request, and Baxter shall implement [*]. If Guilford shall request (or shall be required by the FDA or Applicable Law to implement) [], the parties shall meet to negotiate in good faith the additional costs to be incurred by Baxter in connection with such changes, which costs shall be invoiced separately by Baxter to Guilford, and Guilford will pay such amount to Baxter within [**] of invoicing by Baxter. With respect to label changes by Baxter, including both discretionary changes and changes required by the FDA or Applicable Law, Baxter shall bear the cost of such changes.

	(iii)		[*] testing is utilized throughout the Territory. [*] testing, if required, shall be separately paid for by Guilford as set forth in the Quality Agreement.

	4.4		Fee to Re-Package Product. In the event that Guilford requests Baxter to re-package Product (for example, due to a change in the package insert), Baxter shall perform such re-packaging and will invoice Guilford on delivery of the re-packaged Product. The fee to Guilford will be [***] per unit of re-packaged Product.

	4.5		User Fees. Baxter will pay all user and/or filing fees charged by Governmental Authorities in the Territory which relate to separate Container submissions. Guilford will pay all user and/or filing fees charged by Governmental Authorities in the Territory which relate to the NDA and ongoing marketing of the Product, including, but not limited to, the application fee (other than in connection with the Container), the drug product fee, and that portion of the drug establishment fee (DEF) assessed to Guilford by the FDA.

	4.6		Amount and Timing of Manufacturing Fee Increases. Baxter may increase the Manufacturing Fees [*], which shall be further limited to a maximum increase of [*] for each Calendar Year. Baxter shall use its commercially reasonable efforts to minimize increases in its Material costs to Manufacture Product.

	4.7		Notification, Effective Date and Application of Manufacturing Fee Increases. Baxter will provide to Guilford written notification, [***], of any proposed Manufacturing Fee increase pursuant to Section 4.6, which increase will become effective the following January 1. Such Manufacturing Fee increase shall not apply to Product already invoiced to Guilford, but shall apply to Product which has been released, Delivered and invoiced by Baxter to Guilford after the January 1 effective date.

	4.8		Payment for Product. Baxter shall invoice Guilford upon release of Product to Guilford that has been quality control tested by Baxter in accordance with the Quality Agreement. Invoicing requirements are specified in Schedule F. Guilford shall make payment [*] of receipt of said invoice of Product in accordance with this Section 4.8 or of Delivery of Product by Baxter, whichever is later. Payment shall be remitted by wire transfer in U.S. dollars to a bank account designated in writing by Baxter. [*]

	4.9		Payment Penalties Charged to Guilford. In addition to any other remedies available to Baxter under this Agreement, Baxter may charge Guilford a penalty for amounts not paid within the required [*] period set forth in Section 4.8. Such penalty shall be assessed based on the amount not paid when due at the rate of []. Such penalty shall not be assessed if the reason for the late payment is due to (i) discrepancies between Baxter’s invoice and the shipping records, (ii) incomplete documentation accompanying the Product Delivered by Baxter hereunder, or (iii) due to a claim asserted by Guilford pursuant to Section 8.2 or 8.3. Guilford shall notify Baxter as soon as practicable after it is aware that any of these circumstances exist, and the parties will in good faith attempt to resolve the discrepancy, incompleteness, error and/or dispute in a timely manner. In the event that such circumstances exist, then Guilford will have [**] after resolution of the matter to pay the amount so due before Baxter may assess the aforementioned penalty.

	4.10		Payment Penalties Charged to Baxter. In addition to any other remedies available to Guilford under this Agreement, in the event that Baxter fails to Deliver on time (i.e., no later than Guilford’s requested Delivery date as set forth in Section 3.1.2) the Product subject to a Firm Order, Guilford may (i) reduce the invoice price relating to such Firm Order, or (ii) cancel such Firm Order if Baxter fails to Deliver to Guilford within [***] after Guilford’s requested Delivery date.

			The amount of any such reduction in (i) above shall be equal to:

			[***].

			Notwithstanding the foregoing, if Baxter does not Deliver Product to Guilford in accordance with the requested Delivery date as provided for in Section 3 because of Guilford’s breach or negligence or a force majeure event affecting Baxter as set forth in Section 23.1, then the number of days by which Delivery by Baxter is considered late for purposes of enabling Guilford to reduce the invoice price shall commence upon [***].

	5.1		Delivery of Product. Baxter shall notify Guilford no less than [***] prior to each Delivery of Product by Baxter hereunder.

	5.2		Shipment of Product. Guilford shall arrange for transportation of the Product Manufactured hereunder from Baxter’s Facility. Guilford shall assume the freight and insurance costs and risk of loss for the Product after Baxter

6.1		Bulk Active Title, Risk of Loss and Use. Guilford shall, at no cost to Baxter, at least [***] prior to the date of requested Delivery of Product pursuant to a Firm Order, supply to Baxter sufficient quantities of Bulk Active, and Bulk Active reference standard material for use in conducting assays, which will allow Baxter to meet its obligations to Manufacture Product in accordance with the terms of this Agreement. Baxter shall not be responsible for delays in Delivering Product to Guilford caused by delays in receipt of Bulk Active provided by Guilford. Title to Bulk Active shall remain at all times with Guilford; however, risk of loss shall pass to Baxter at the time Bulk Active arrives at the Facility and is accepted by Baxter from Guilford’s carrier. Baxter shall not use Bulk Active supplied by Guilford for any purpose other than the Manufacture of Product exclusively for Guilford hereunder or as otherwise agreed by the parties in writing.

6.2		Certificate of Analysis. Guilford shall provide Baxter with a certificate of analysis for each lot of Bulk Active delivered by Guilford to Baxter using the format set forth in the Quality Agreement. Guilford shall also provide Baxter with a certificate of analysis for each lot of Bulk Active reference standard material delivered to Baxter in the format set forth in the Quality Agreement.

6.3		Inventory Counts. Physical inventory counts of all Bulk Active shall be taken by Baxter at the end of each Calendar Month, reconciled to Baxter’s books and perpetual records, and promptly reported to Guilford in a form and level of detail specified in the Quality Agreement. Data trail/accountability information will be kept by Baxter for all receipts and disbursements of Bulk Active in accordance with the Quality Agreement. All inventories of Bulk Active will be subject to audit by Guilford in accordance with the Quality Agreement.

6.4		Bulk Active Freight Claims. Baxter shall maintain paperwork on all freight claims arising from Bulk Active that Baxter claims was delivered to its Facility in a damaged state. Baxter will assist Guilford in obtaining recovery for such freight claims, and Guilford shall reimburse Baxter for all reasonable

6.5		Materials – Container. Baxter shall manufacture the Container itself and shall be responsible for approving all vendors of raw materials therefor. The Container shall meet the requirements of the Container specifications set forth in the Quality Agreement and shall be manufactured in accordance with cGMPs and all Applicable Laws, FDA requirements, CDMFs and approved FDA filings. Changes to the Container specifications shall be made only in accordance with the Quality Agreement.

6.6		Materials – Other than Container. All Materials (other than the Container) required for Manufacture of Product supplied by Baxter shall be purchased by Baxter from vendors approved by Baxter in accordance with Baxter’s vendor qualification and approval procedures, copies of which have been provided to Guilford. Baxter shall provide Guilford with copies of any amendments or revisions to such procedures during the term of this Agreement. Notwithstanding the foregoing, excipient vendors shall be approved in writing by Guilford in advance of use by Baxter for Manufacture of Product. Excipient vendors currently approved by Guilford are set forth on Schedule B; additional vendors may be added to Schedule B from time to time upon prior written agreement of the parties. Such Materials shall meet the requirements of the Product Specifications. All Materials supplied to Baxter by Guilford shall be purchased, inspected and released by Guilford per Guilford’s Standard Operating Procedures. Materials supplied by Guilford will be purchased from Guilford approved vendors.

7.2		Claims for Failure to Meet Bulk Active Specifications. Claims by Baxter on account of quality or concerning any failure of Bulk Active to meet the warranty specified in Section 7.1(i) shall be made promptly by Baxter, in writing, but no later than [*] following Baxter’s receipt of Bulk Active at the Facility. Claims by Baxter on account of shortage, loss or damage shall be made promptly by Baxter, in writing, but no later than [] following Baxter’s receipt of Bulk Active at the Facility. In connection with such claim(s), Baxter shall, at Guilford’s request, investigate and re-test such Bulk Active and shall permit one or more representatives from Guilford to be present and participate in the investigation and re-testing by Baxter, which investigation and re-testing will be done at Baxter’s own cost. If Guilford and Baxter agree that the Bulk Active did not meet the warranties set forth in Section 7.1(i) upon delivery to Baxter, then Baxter shall destroy or return the Bulk Active to Guilford in accordance with Guilford’s instructions in accordance with the provisions of Section 7.4. If the Bulk Active is determined upon agreement by the parties to meet such warranty, then Baxter shall utilize the Bulk Active to Manufacture Product. If the parties are unable to agree as to whether such Bulk Active met such warranties, Baxter shall return the Bulk Active to Guilford and the parties shall cooperate to have the Bulk Active in dispute analyzed by an independent testing laboratory of recognized repute agreeable to both parties. The results of such laboratory testing shall be final and binding on the parties on the issue of compliance of the Bulk Active with such warranty. [**].

7.3		Other Claims. If Baxter claims that any shipment of Bulk Active did not, at the time of delivery, meet the warranties specified in Section 7.1(ii) or (iii), Baxter shall promptly (and in any event within [***]) notify Guilford and either destroy or return such Bulk Active to Guilford in accordance with Guilford’s instructions, and if Guilford and Baxter are unable to agree as to whether or not such Bulk Active met such warranties, the dispute shall be settled in accordance with the dispute resolution provisions set forth in Section 23.6. If the Bulk Active is determined to have met such warranties, then Baxter shall bear the cost of such dispute resolution proceedings, including Guilford’s reasonable attorneys’ fees. If the Bulk Active is determined not to have met any such warranty, then Guilford shall bear the cost of such proceedings, including Baxter’s reasonable attorneys’ fees, and shall pay Baxter for any Product Manufactured which incorporates such Bulk Active at the Manufacturing Fees specified in Section 4.

8.1		Baxter Warranties. Baxter represents and warrants that all Product shall, at the time of Delivery to Guilford (i) meet the Product Specifications; (ii) be Manufactured in accordance with cGMPs; and (iii) be Manufactured in accordance with the validated processes and test methods specified in NDA and other filings with the FDA maintained in the Territory with respect to Product, and with all Applicable Laws and regulations and FDA requirements in effect on the day of Delivery. Without limiting the warranty in Section 8.1(iii), Baxter guarantees that no Product shall, at the time of Delivery, be (a) adulterated or misbranded within the meaning of the Act, or any similar law of any other jurisdiction in the Territory, or (b) an article which may not, under the provisions of the Act, or any similar law of any other jurisdiction in the Territory, be introduced into interstate commerce. Baxter also represents and warrants that it has the right to enter into this Agreement and to Manufacture and supply Product to Guilford in accordance with the terms and conditions set forth herein and in the Related Agreements, and that this Agreement and the Related Agreements will not conflict with, contravene or constitute a default under any other agreement, contract or other arrangement by which Baxter is bound, including without limitation the Merck/Baxter Agreement. NO OTHER EXPRESS OR IMPLIED WARRANTY EXISTS, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND BAXTER EXPRESSLY DISCLAIMS ANY SUCH WARRANTIES.

8.2		Claims for Failure to Meet Product Specifications. If Guilford claims that any shipment of Product did not, at the time of Delivery to Guilford, meet the warranty specified in Section 8.1(i), Guilford shall notify Baxter within [*] from Guilford’s receipt of Product at the designated location; provided that in the case of latent defects that are not discoverable upon exercise of reasonable diligence within such [*] period, Guilford shall notify Baxter as soon as practicable upon discovery of such defect, however, in no event after the Product has expired according to its expiry date. If Guilford and Baxter are unable to agree as to whether such Product met such warranty, then the parties shall cooperate to have the Product in dispute analyzed by an independent testing laboratory of recognized repute selected by Guilford and approved by Baxter, which approval shall not be unreasonably withheld. The results of such laboratory testing shall be final and binding on the parties on the issue of compliance of the Product with such warranty. If the Product is determined to have met such warranty, then Guilford shall bear the cost of such laboratory testing. If the Product is determined not to have met such warranty for reasons

(i)		bear the cost of such laboratory testing;

(ii)		pay Guilford, [*], which price may be adjusted by Guilford no more than once per Calendar Year by a percentage up to the percentage increase in the CPI for the most recently ended Calendar Year over the prior Calendar Year which shall be further limited to a maximum of [*] for that Calendar Year;

(iii)		at Guilford’s written election, within [*] after receipt of such determination, either (a) replace the rejected Product within [] of the date of such determination; or (b) at Baxter’s option either credit Guilford’s account or refund to Guilford an amount equal to the Manufacturing Fees paid for such Product, plus any applicable delivery charge paid by Guilford. In the event that Guilford does not make such written election within [**], then the election shall be made at Baxter’s option after written notification to Guilford;

(iv)		pay to Guilford interest at the rate of [*] on the amount of payment(s) made by Guilford for such Product, if any, from the date that such payment was made until, as applicable, (a) [*] after delivery of the replacement Product and associated invoice to Guilford, or (b) deduction of the credit from an amount due by Guilford to Baxter on the date when due (i.e., the credit must actually be used by Guilford and not simply be posted by Baxter to Guilford’s account) or refund to Guilford, as applicable, pursuant to Section 8.2(iii)(b); and

(v)		cancel any late fees assessed by Baxter to Guilford for non-payment or late payment of the invoice(s) relating to such Product which did not meet such warranty.

(i)		bear the cost of such dispute resolution proceedings, including Guilford’s reasonable attorneys’ fees;

(ii)		pay Guilford, at the price established in Section 8.2(ii), for the Bulk Active consumed in the Manufacture of such Product;

9.2		Guilford Indemnification. Guilford, on its own behalf, and on behalf of its Affiliates and Licensees, shall defend, indemnify and hold harmless Baxter and its Affiliates and their respective directors, officers, shareholders, employees and agents, and each of their successors and permitted assigns (collectively, the “Baxter Indemnitees”), from and against any and all Damages which arise out of or relate to (i) the failure of Bulk Active provided by Guilford hereunder to meet the warranties set forth in Section 7.1; (ii) a breach of any of Guilford’s other representations, warranties, covenants, agreements or obligations under this Agreement or the Related Agreements; (iii) negligence or willful misconduct in the performance or nonperformance of Guilford’s obligations under this Agreement or the Related Agreements; (iv) personal injury or property damage caused by the Product (except to the extent covered by Baxter’s indemnification obligations hereunder, including those set forth in Sections 9.1, 14 and 17, and the Related Agreements); or (v) any patent, trade name, trademark, service mark or copyright infringement or misuse, or any claim or judgment of such infringement or misuse thereof, relating to the Bulk Active supplied by Guilford or to the Product (except to the extent covered by Baxter’s indemnification obligations hereunder, including those set forth in Section 9.1) or the use or printing of any trademarks, trade names or copyrightable materials of Guilford or its Affiliates, Licensees and Distributors as authorized by this Agreement; provided, that Guilford shall have no obligation to indemnify Baxter under this Section 9.2 to the extent such Damages arise out of or relate to any matter for which Baxter is obligated to indemnify Guilford under this Agreement or the Related Agreements.

9.3		No Claim for Losses. In no event shall either party or their respective Affiliates be liable for any special, indirect, incidental or consequential damages arising out of this Agreement, except to the extent any such special, indirect, incidental or consequential damages shall be payable to a third party.

9.4		Prompt Notice. Each party agrees to give the other prompt written notice of any claims made for which the other might be liable under the foregoing indemnifications. The party from whom indemnification is sought hereunder shall have the right to assume responsibility for any such claim for indemnification, including the defense thereof, by providing notice to the indemnified party within [*] of receipt of such notice and by selecting counsel reasonably acceptable to the indemnified party within such [*] period. The indemnified party will cooperate fully with the indemnifying party in defending or otherwise resolving any claim subject to indemnification hereunder, and the indemnifying party will have full control of the defense of any such litigation; however, the indemnified party, at its expense, shall be entitled to be represented by its own counsel in any such litigation. The

		indemnifying party agrees to bear all other costs and expenses of litigation, including its own attorneys’ fees, in connection with such litigation. In the event the indemnifying party refuses or fails to assume defense of any such claim in accordance with the foregoing, or refuses or fails to appoint counsel reasonably acceptable to the indemnified party within the [***] time period set forth above, the indemnified party may retain reasonable counsel to defend the claim and the indemnifying party agrees to bear all reasonable costs and expenses of such litigation, including the indemnified party’s reasonable attorneys’ fees, in connection with such litigation.

9.5		Refund Due to Injunction. In the event that the sale of Product is enjoined due to an alleged or actual infringement of third party intellectual property rights by either party, then, in addition to all other rights and obligations of the parties hereunder (i) if Guilford is obligated under Section 9.2(v) to indemnify Baxter and Baxter’s Affiliates, Guilford shall pay Baxter for any affected Product remaining in Baxter’s possession at the Manufacturing Fees set forth in Section 4.1; and (ii) if Baxter is obligated under Section 9.1(iv) to indemnify Guilford and Guilford’s Affiliates, Baxter shall (a) return to Guilford any affected Bulk Active remaining in Baxter’s possession; and (b) refund to Guilford the Manufacturing Fees paid by Guilford, calculated on a FIFO basis, for all affected Product remaining in Guilford’s and its Affiliates’, Licensees’ and Distributors’ inventory as of the applicable date of injunction and subsequently returned to Guilford by its customers pursuant to the injunction after the injunction date.

9.6		Not Binding. Neither party nor its respective Affiliates shall be responsible or bound by any settlement made by the other party without its prior written consent.

9.7		Additional Remedies. The indemnification obligations of the parties established in this Section 9 shall be in addition to, and shall be available to the parties irrespective of the availability of, any other remedies expressly contemplated in this Agreement, including without limitation those contemplated in Sections 7, 8, 14, 17 and 22; provided, that no party shall be entitled to recover multiple damages for the same claim under multiple sections of this Agreement.

10.1		Catalog Listings. Each party may list Product in its catalogs as a regularly available item in the Territory. Baxter shall also be permitted to provide customers with its “sell sheets” listing the availability of Product. Baxter listings in catalogs and “sell sheets” will show no prices and Baxter will provide Guilford with a copy of such listings for prior written approval.

10.2		Baxter Promotion. Baxter shall not promote Product or its therapeutic qualities. Baxter will use reasonable efforts to promote acceptance and use of Container in the Territory. Any such promotion of the Container that is to include reference to the Product shall be approved in writing in advance by Guilford.

10.3		Product Sales. Nothing in Section 10.1 or 10.2 shall be construed to grant Baxter a license to sell Product. Guilford and its Affiliates, Licensees and Distributors shall be the exclusive marketers, sellers and distributors of Product in the Territory.

10.4		Guilford Promotional Materials. Guilford is responsible for, and is not required or expected to forward to Baxter for written approval, any promotional materials for Product, except as to the use of Baxter’s Trademarks as provided in Section 11 and except as to any statements and/or claims made regarding the Container. Baxter hereby agrees to the use of its Trademarks and the statements and/or claims regarding the Container made in the promotional materials that have been approved in writing by Baxter (the “Approved Materials”). Guilford need not submit individual promotional materials to Baxter for approval provided that any statements and/or claims made in such promotional materials using Baxter’s Trademarks or related to the Container are identical to the statements and/or claims made in the Approved Materials. If Guilford desires to make statements and/or claims related to the Container, or desires to use Baxter’s Trademarks, in either case in a manner not identical to the Approved Materials, then Guilford shall submit such statements and/or claims to Baxter in writing, and if Baxter does not object to such statements and/or claims within [***] of receipt from Guilford, then Guilford shall have been authorized to use such Trademarks, statements and/or claims and the Approved Materials shall be deemed to be amended to include such new items.

10.5		Labeling. Prescribing information and all labeling copy, including all changes therein, to accompany the Product in the Territory on the Product label and in the Product insert shall be the responsibility of Guilford. Notwithstanding the foregoing, Guilford will collaborate with Baxter in determining the appropriate information and statements to be made regarding the description, characteristics and/or use of the Container and will utilize, to the greatest extent possible and appropriate for the Product, statements which are consistent with language used by Baxter for other products packaged in Baxter’s Container.

11.1		Registration of Trademarks. Each party or its Affiliates, as the case may be, will seek to maintain in force during the term of this Agreement, its Trademark(s), at its own cost, in the Territory.

11.2		Ownership of Trademarks. Each party warrants that it or its Affiliate, as the case may be, has full right, title and interest in and to its Trademark(s) and registrations obtained in the Territory. Each party retains all right, title and interest in or to its Trademark(s) and shall not assert any claim to any goodwill, reputation or ownership of the other party’s Trademark(s). All uses of Guilford’s Trademark by Baxter shall inure to the benefit of Guilford, and all uses of Baxter’s Trademarks by Guilford shall inure to the benefit of Baxter. However, neither party shall be obligated to compensate the other for

		benefits which may inure as the results of the use of such other party’s Trademark(s).

11.3		License to Use Trademarks. During the term of this Agreement, on a non-exclusive and royalty-free basis, solely for the Territory and solely in connection with the rights and responsibilities of the parties as provided in this Agreement and the Related Agreements, (a) Guilford hereby grants Baxter a license to use its Trademark in connection with the Manufacturing of Product hereunder and in connection with activities permitted pursuant to Sections 10.1 and 10.2; and (b) Baxter hereby grants Guilford a license to use its Trademarks in connection with the registration, promotion, sale and distribution of the Product. Neither party may sublicense this license to the other party’s Trademark(s), except that Guilford may sublicense this license to Guilford’s Affiliates, Licensees and Distributors of Product, without obtaining the prior written consent of Baxter. Any such sublicense granted shall incorporate the terms of this Agreement by reference and shall bind the sublicensee to the provisions of Section 11.

11.4		Trademark Marking. Each party shall approve in writing the proper manner in which its Trademark(s) must be displayed by the other party when used in connection with the terms of this Agreement prior to any use of such Trademark(s), including appropriate indication of each party’s ownership and registration status of its Trademark(s).

11.5		Quality Control. Each party shall use the other party’s Trademark(s) only as specified in Section 11 and in strict accordance with the approved use under Section 11.4. The quality control provisions of the Quality Agreement apply to the use of Trademarks.

11.6		Goodwill of Trademarks. Neither party shall use the other party’s Trademark(s) in any way which will adversely affect the goodwill of the other party’s Trademark(s) and shall exercise the necessary controls to maintain the good reputation and good will of such Trademark(s). A requesting party may periodically inspect, sample and review the other party’s actual use of the Trademark(s) of the requesting party to determine whether the other party is maintaining the goodwill of such Trademark(s). Such inspections, sampling and review shall be undertaken by the other party at the requesting party’s expense and request, but no more than once per year, to which the other party shall promptly respond and cooperate.

11.7		Protection of Trademarks. Each party will in good faith protect its Trademark rights against any infringement or claim that the Trademarks are invalid or infringe the rights of others. Each party will give prompt written notice to the other party of any infringement or possible infringement of the other party’s Trademark(s) during the term of this Agreement. The commencement, strategies, termination and settlement of any action relating to the validity or infringement of each party’s Trademark(s) shall be decided by the party owning such Trademark(s).

12.1		Notification. If Guilford and/or its Affiliates desire to license Guilford’s rights to market and sell Product in the Territory, Guilford shall first notify Baxter in writing of the identity of the proposed Licensee and the nature of the rights to be licensed.

12.2		Baxter Disapproval Due to Confidentiality Concerns. With respect to those proposed Licensees which will need access to Baxter’s Confidential Information, Baxter shall have the right, within [***] after written notice given by Guilford pursuant to Section 12.1, to disapprove any such proposed Licensee; provided that in order to exercise such right, Baxter must demonstrate to Guilford’s reasonable satisfaction that such proposed Licensee is engaged in, or is preparing to engage in, the development or manufacture of Flexible Containers.

12.3		Other Baxter Disapproval. Baxter shall also have the right, within thirty (30) calendar days after written notice given by Guilford pursuant to Section 12.1, to disapprove any such proposed Licensee if Guilford’s license with such proposed Licensee would create circumstances under which Baxter, by carrying out its obligations under this Agreement, would [*] then in existence in the Territory; provided that Baxter must provide Guilford with documentary evidence of such []. Notwithstanding the foregoing, Baxter agrees that it will not, after it signs this Agreement, [**], unless such contract or arrangement would similarly affect Baxter’s other pharmaceutical company customers for pre-mixed products in the Territory. In the event that Baxter shall for any reason become subject to any provision or restriction in any contract or other arrangement which would interfere with Guilford’s utilization of third parties as Licensees in the Territory after the date of this Agreement, this Section 12.3 shall not apply with respect to such contract or arrangement. Without limiting the generality of the foregoing, in no event shall Baxter be entitled to enter into any contract which would interfere with Guilford’s utilization in the Territory of a previously approved Licensee.

12.4		No Unreasonable Disapproval. Baxter will not unreasonably disapprove any proposed Licensee pursuant to Section 12.2 or 12.3.

12.5		Guilford License with Licensees. Guilford shall not license any responsibilities under this Agreement to any proposed Licensee disapproved by Baxter pursuant to Section 12.2 or 12.3.

12.6		Approval [*] Rights. If Baxter does not disapprove a proposed Licensee within the thirty (30) calendar day period set forth in Section 12.2 or 12.3, then such proposed Licensee shall be deemed to be approved by Baxter [*]. Guilford shall have the right to license its rights under this Agreement to any Licensee approved by Baxter in accordance with this Section 12.

12.7		Distributors. Notwithstanding anything to the contrary in this Section 12, there shall be no restriction upon, and Baxter shall not have the right to approve or disapprove, Guilford’s or its Affiliates’ use of any Distributors; provided that Guilford shall not license its rights to market and sell Product to such Distributors except in accordance with this Section 12 and Guilford shall not disclose Baxter’s Confidential Information to any Distributor without Baxter’s prior written consent, which consent shall not be unreasonably withheld or delayed.

12.8		Guilford Continuing Obligations. No license or contract with a Licensee or Distributor shall relieve Guilford of its obligations under this Agreement or any other written agreement entered into by the parties. Furthermore, Guilford shall be responsible for the performance of any Licensee concerning the Product in the Territory and shall indemnify Baxter and its Affiliates with respect thereto as provided in Section 9.2.