6-K

FORM 6-K
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549

Report of Foreign Private Issuer

Pursuant to Rule 13a-16 or 15d-16
of the Securities Exchange Act of 1934

For the month of July 2003

Commission File Number: 0-22774

RUSSEL METALS INC.
(Translation of registrant's name into English)

1900 Minnesota Court, Suite 210 Mississauga, Ontario, L5N 3C9
(Address of principal executive offices)


Indicate by check mark whether the registrant files or will file annual reports under cover Form 20-F or Form 40-F.

Form 20-F......... Form 40-F...X......

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1): ____

Note: Regulation S-T Rule 101(b)(1) only permits the submission in paper of a Form 6-K if submitted solely to provide an attached annual report to security holders.

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7): ____

Note: Regulation S-T Rule 101(b)(7) only permits the submission in paper of a Form 6-K if submitted to furnish a report or other document that the registrant foreign private issuer must furnish and make public under the laws of the jurisdiction in which the registrant is incorporated, domiciled or legally organized (the registrant's "home country"), or under the rules of the home country exchange on which the registrant's securities are traded, as long as the report or other document is not a press release, is not required to be and has not been distributed to the registrant's security holders, and, if discussing a material event, has already been the subject of a Form 6-K submission or other Commission filing on EDGAR.

Indicate by check mark whether by furnishing the information contained in this Form, the registrant is also thereby furnishing the information to the Commission pursuant to Rule 12g3-2(b) under the Securities Exchange Act of 1934.

Yes ..... No ..X...

If "Yes" is marked, indicate below the file number assigned to the registrant in connection with Rule 12g3-2(b): 82- ________

Signatures

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

	Russel Metals Inc.
	(Registrant)
Date: July 29, 2003	By: /s/BRIAN R. HEDGES
	Brian R. Hedges
	Executive Vice President & CFO

Documents Included as Part of this Report:

1.	Press Release dated July 25, 2003 announcing Second Quarter 2003 Results
2.	Press Release dated July 25, 2003 declaring Dividend for Common Shares
3.	Press Release dated July 25, 2003 declaring Dividend for Class II Preferred Shares Series C
4.	Management's Discussion and Analysis For The Six Months Ended
	June 30, 2003
5.	Interim Financial Statements for the Six Months Ended June 30, 2003

EX-99

NEWS

FOR IMMEDIATE RELEASE

TSX STOCK SYMBOLS:   RUS, RUS.PR.C

RUSSEL METALS REPORTS Q2 RESULTS OF CDN $0.08 PER SHARE

TORONTO, CANADA -- July 24, 2003 -- Russel Metals Inc. today announced unaudited net earnings of $3.6 million or $0.08 basic earnings per share for the second quarter ended June 30, 2003, a decrease of 64% compared to last year's second quarter earnings of $0.22 per share.  The Company experienced a decline in segment operating profits in all three areas due to lower margins and weaker demand.

The net earnings for the six months ended June 30, 2003 were $7.2 million compared to $12.6 million for the six months ended June 30, 2002.  The earnings per share for the six months ended June 30, 2003 were $0.16 versus $0.30 in the same period for 2002.  

Total revenues were $706.7 million for the six months ended June 30, 2003, a 4% increase compared to $677.4 million for the same period in 2002.  The increase in the six month consolidated revenues is attributable to higher selling prices in service centers and increased volume in the energy sector.

Total revenues of $339.8 million for the three months ended June 30, 2003 were slightly down compared to the second quarter of 2002 revenue of $351.5 million.  The revenue decline is mainly related to weak demand and an over supply of product in North America. 

Bud Siegel, President and CEO commented, "Subsequent to March 2002, market prices quickly escalated because of the U.S. Section 201 steel import tariffs and safeguard measures, albeit without a corresponding increase in demand.  In the first half of 2003, demand has remained uneven, both new and previously idled tonnage have come on-stream and prices have dropped dramatically from last year's highs.  Russel Metals has responded by reducing operating costs and rationalizing its balance sheet, generating almost $27 million in cash from operations.  I believe the balance of 2003 will be very difficult for the industry unless there is a rationalization of capacity and an increase in demand."

Subsequent to the quarter end, Russel Metals successfully completed the acquisition of Acier Leroux inc.  Mr. Siegel went on to state, "The management of Russel Metals and Acier Leroux are actively evaluating the opportunities presented by the acquisition and I am extremely pleased with the strengths we have identified in our combined operations.  We anticipate the integration of the two companies to be completed by early 2004."

The Company will be holding an Investor Conference Call on Friday, July 25, 2003 at 9:00 a.m. EST to review its second quarter results for 2003.  The dial-in-telephone number for the call is 1-888-433-1657.

For those unable to participate in the conference call, it will be recorded and available for listening at 1-800-558-5253 until midnight, August 1.  You will be required to enter reservation number 21014581 in order to access the call. 

Russel Metals is one of the largest metals distribution companies in North America.  It carries on business in three metals distribution segments: service center, energy sector and import/export, under various names including Russel Metals, A.J. Forsyth, Acier Dollard, Acier Leroux, Acier Loubier, Acier Richler, Armabec, Arrow Steel Processors, B&T Steel, Baldwin International, Comco Pipe and Supply, Drummond McCall, Ennisteel, Fedmet Tubulars, Leroux Steel, McCabe Steel, Mégantic Métal, Métaux Russel, Milspec Industries, Poutrelles Delta, Pioneer Pipe, Russel Metals Williams Bahcall, Spartan Steel Products, Sunbelt Group, Transfo-Métal, Triumph Tubular & Supply, Vantage Laser, Wirth Steel and York Steel.

- 30 -

For further information, contact:
Brian R. Hedges, C.A.
Executive Vice President
and Chief Financial Officer
Russel Metals Inc.
(905) 819-7401
Web site : www.russelmetals.com
e-mail: info@russelmetals.com

RUSSEL METALS INC.
CONSOLIDATED BALANCE SHEETS
(UNAUDITED)
	June 30,	Dec. 31,
($000)	2003	2002
ASSETS
Current
Cash	$    17,872	$    25,068
Accounts receivable	218,246	201,675
Inventories	265,949	329,415
Prepaid expenses and other assets	5,180	6,077
Income taxes recoverable	1,913	1,306
	509,160	563,541
Property, Plant and Equipment	111,194	110,512
Deferred Financing Charges	4,169	4,962
Goodwill	2,295	2,709
Future Income Tax Assets	9,679	10,698
Other Assets	2,234	3,172
	$  638,731	$  695,594
LIABILITIES AND SHAREHOLDERS' EQUITY
Current
Bank indebtedness	$             -	$   21,141
Accounts payable and accrued liabilities	171,532	188,585
Current income taxes payable	1,942	2,487
	173,474	212,213
Long-Term Debt	186,673	212,602
Pensions and Benefits	9,902	9,590
Future Income Tax Liabilities	15,171	8,749
	385,220	443,154
Shareholders' Equity
Preferred shares	30,000	30,000
Shareholders' equity	223,511	222,440
	253,511	252,440
	$  638,731	$  695,594

RUSSEL METALS INC.
CONSOLIDATED STATEMENTS OF EARNINGS AND RETAINED EARNINGS
(UNAUDITED)
	Quarters ended		Six months ended
	June 30,		June 30,
($000, except per share data and number of shares)	2003	2002	2003	2002
Segment Revenues
Service center distribution	$   192,345	$   194,098	$   386,558	$   372,610
Energy sector distribution	71,152	67,516	154,941	141,543
Steel import/export	72,598	85,046	160,267	157,122
Other	3,661	4,863	5,011	6,111
	$   339,756	$   351,523	$   706,777	$   677,386
Segment Operating Profits
Service center distribution	$       7,448	$       9,450	$      13,520	$     15,418
Energy sector distribution	1,486	2,836	5,653	6,814
Steel import/export	2,483	6,443	6,133	10,344
Other	1,360	2,490	390	1,720
Corporate expenses	(2,176)	(2,199)	(4,486)	(4,252)
Earnings before the following	10,601	19,020	21,210	30,044
Foreign exchange gain	-	748	348	739
Interest expense	(4,871)	(4,939)	(9,975)	(10,070)
Earnings before income taxes	5,730	14,829	11,583	20,713
Provision for income taxes	(2,155)	(5,727)	(4,421)	(8,097)
Net earnings for the period	3,575	9,102	7,162	12,616
Retained earnings --
Dividends on preferred shares	(562)	(562)	(1,125)	(1,125)
Earnings available to common
shareholders	3,013	8,540	6,037	11,491
Dividends on common shares	(2,670)	(1,900)	(5,337)	(1,900)
Retained earnings, beginning of the period	106,215	88,289	105,858	100,461
Adjustment for goodwill impairment	-	-	-	(15,123)
Retained earnings, end of the period	$  106,558	$    94,929	$  106,558	$    94,929
Basic earnings per common share	$        0.08	$        0.22	$        0.16	$        0.30
Diluted earnings per common share	$        0.08	$        0.21	$        0.16	$        0.29
Number of Shares
Common shares
Average for the period
Basic	38,150,722	38,009,506	38,115,382	37,995,581
Diluted	41,431,322	39,975,006	40,818,482	39,706,081
End of the period	38,175,601	38,045,501	38,175,601	38,045,501
Class II preferred shares, Series C	1,200,000	1,200,000	1,200,000	1,200,000

RUSSEL METALS INC.
CONSOLIDATED CASH FLOW STATEMENTS
(UNAUDITED)
	Quarters ended		Six months ended
	June 30,		June 30,
($000)	2003	2002	2003	2002
Operating activities
Net earnings for the period	$      3,575	$      9,102	$      7,162	$    12,616
Depreciation and amortization	3,585	3,799	7,201	7,664
Future income taxes	(618)	3,797	437	4,918
Loss (gain) on sale of fixed assets	(7)	(88)	8	34
Foreign exchange gain	-	(748)	-	(739)
Cash from operating activities before
working capital	$      6,535	$     15,862	$      14,808	$    24,493
Changes in non-cash working capital items
Accounts receivable	1,366	(7,677)	(24,447)	(19,339)
Inventories	9,579	(8,824)	48,835	15,946
Accounts payable and accrued liabilities	9,851	6,403	(11,828)	18,691
Current income taxes	(2,560)	3,098	(1,526)	3,102
Other	(220)	(677)	897	(235)
Change in non-cash working capital	18,016	(7,677)	11,931	18,165
Cash from operating activities	24,551	8,185	26,739	42,658
Financing activities
Decrease in bank borrowing	(12,259)	-	(21,141)	-
Issue of common shares	219	215	431	215
Dividends on common shares	(2,670)	(1,900)	(5,337)	(1,900)
Dividends on preferred shares	(562)	(562)	(1,125)	(1,125)
Cash used in financing activities	(15,272)	(2,247)	(27,172)	(2,810)
Investing activities
Purchase of business	-	-	-	(4,387)
Purchase of fixed assets	(6,219)	(4,099)	(10,452)	(5,399)
Proceeds on sale of fixed assets	124	1,397	145	2,233
Other	4,083	(2,582)	3,544	(2,330)
Cash used in investing activities	(2,012)	(5,284)	(6,763)	(9,883)
Increase (decrease) in cash	7,267	654	(7,196)	29,965
Cash position, beginning of the period	10,605	46,462	25,068	17,151
Cash position, end of the period	$   17,872	$   47,116	$   17,872	$   47,116
Supplemental information:
Interest Paid	$     9,397	$   10,197	$     9,613	$   10,122
Income Taxes Paid	$     1,725	$     1,255	$     5,540	$     2,462

EX-99

NEWS

FOR IMMEDIATE RELEASE

TSX STOCK SYMBOL:       RUS, RUS.PR.C       

RUSSEL METALS DECLARES DIVIDEND FOR COMMON SHARES

TORONTO, CANADA -- July 24, 2003 -- Russel Metals Inc. announced today that it has declared a dividend in the amount of Cdn 7 cents per share on its Common Shares, payable on September 15, 2003 to shareholders of record at the close of business on August 6, 2003. 

Russel Metals is one of the largest metals distribution companies in North America.  It carries on business in three metals distribution segments: service center, energy sector and import/export, under various names including Russel Metals, A.J. Forsyth, Acier Dollard, Acier Leroux, Acier Loubier, Acier Richler, Armabec, Arrow Steel Processors, B&T Steel, Baldwin International, Comco Pipe and Supply, Drummond McCall, Ennisteel, Fedmet Tubulars, Leroux Steel, McCabe Steel, Mégantic Métal, Métaux Russel, Milspec Industries, Poutrelles Delta, Pioneer Pipe, Russel Metals Williams Bahcall, Spartan Steel Products, Sunbelt Group, Transfo-Métal, Triumph Tubular & Supply, Vantage Laser, Wirth Steel and York Steel.

-30-

For further information, contact:
Elaine G. Hillis,
Assistant Secretary
Russel Metals Inc.
(905) 819-7419
Web site : www.russelmetals.com
e-mail: info@russelmetals.com

EX-99

NEWS

FOR IMMEDIATE RELEASE

TSX STOCK SYMBOLS:  RUS, RUS.PR.C

RUSSEL METALS DECLARES DIVIDEND FOR CLASS II PREFERRED SHARES, SERIES C

TORONTO, CANADA -- July 24, 2003 -- Russel Metals Inc. announced today that it has declared a dividend in the amount of Cdn 46.875 cents per share on its Class II Preferred Shares, Series C, payable on September 15, 2003 to shareholders of record at the close of business on August 6, 2003.

Russel Metals is one of the largest metals distribution companies in North America.  It carries on business in three metals distribution segments: service center, energy sector and import/export, under various names including Russel Metals, A.J. Forsyth, Acier Dollard, Acier Leroux, Acier Loubier, Acier Richler, Armabec, Arrow Steel Processors, B&T Steel, Baldwin International, Comco Pipe and Supply, Drummond McCall, Ennisteel, Fedmet Tubulars, Leroux Steel, McCabe Steel, Mégantic Métal, Métaux Russel, Milspec Industries, Poutrelles Delta, Pioneer Pipe, Russel Metals Williams Bahcall, Spartan Steel Products, Sunbelt Group, Transfo-Métal, Triumph Tubular & Supply, Vantage Laser, Wirth Steel and York Steel.

- 30 -

For further information, contact:
Elaine G. Hillis
Assistant Secretary
Russel Metals Inc.
(905) 819-7419
Website:  www.russelmetals.com
E-mail:     info@russelmetals.com

EX-99

RUSSEL METALS INC.

MANAGEMENT'S DISCUSSION AND ANALYSIS

FOR THE SIX MONTHS ENDED JUNE 30, 2003

The following management's discussion and analysis of financial condition and results of operations of Russel Metals Inc. and its subsidiaries (Russel Metals or the Company) provides information to assist the reader and should be read in conjunction with the accompanying condensed Interim Consolidated Financial Statements for the six months ended June 30, 2003 and 2002, the Management's Discussion and Analysis and the audited Consolidated Financial Statements for the year ended December 31, 2002, including the notes thereto contained in the fiscal 2002 annual report of the Company.  In the opinion of management, such interim information contains all adjustments, consisting only of normal recurring adjustments, necessary for a fair presentation of the results of such periods.  The results of operations for the periods shown are not necessarily indicative of what the Company's results will be for the full year.  Statements contained in this document that relate to Russel Metals' beliefs or expectations as to certain future events are not statements of historical fact and are forward-looking statements.  Russel Metals cautions readers that there are important factors, risks and uncertainties, including but not limited to economic, competitive and governmental factors affecting Russel Metals' operations, markets, products, services and prices that could cause the Company's actual results, performance or achievements to be materially different from those forecasted or anticipated by Russel Metals in such forward-looking statements.  All dollar references in this report are in Canadian dollars unless otherwise stated.

The Management's Discussion and Analysis includes a number of measures that are not prescribed by generally accepted accounting principles and as such may not be comparable to similar measures presented by other companies.  The Company's definition of gross margins, segment operating profits, EBITA, coverage ratio, and inventory turns are provided in the sections where used.


Russel Metals is one of the largest metal distribution companies in North America based on revenues and tons sold.  The Company conducts business primarily in three metals distribution business segments: service centers; energy sector related pipe, tube, valves and fittings; and steel import /export.

Results of Operations

The following table provides a summary of revenues, segment operating profits (revenue minus cost of sales and operating expenses excluding corporate expenses and interest expense) and gross margins (revenue minus cost of sales) as a percentage of revenues for Russel Metals' operating segments.  The table shows the segments as they are reported to management and they are consistent with the segmented reporting in Note 13 to the Company's 2002 Consolidated Financial Statements.

	Quarters Ended				Six Months Ended
	June 30,				June 30,
			2003				2003
			Change				Change
(in thousands of dollars,			as a %				as a %
except percentages)	2003	2002	of 2002	2003		2002	of 2002
Segment Revenues
Service center distribution	$192,345	$194,098	(0.9%)	$386,558		$372,610	3.7%
Energy sector distribution	71,152	67,516	5.4%	154,941		141,543	9.5%
Steel import/export	72,598	85,046	(14.6%)	160,267		157,122	2.0%
Other	3,661	4,863	(24.7%)	5,011		6,111	(18.0%)
	$339,756	$351,523	(3.3%)	$706,777		$677,386	4.3%
Segment Operating Profits
Service center distribution	$    7,448	$    9,450	(21.2%)	$  13,520		$  15,418	(12.3%)
Energy sector distribution	1,486	2,836	(47.6%)	5,653		6,814	(17.0%)
Steel import/export	2,483	6,443	(61.5%)	6,133		10,344	(40.7%)
Other	1,360	2,490	(45.4%)	390		1,720	(77.3%)
Corporate expenses	(2,176)	(2,199)	1.0%	(4,486)		(4,252)	(5.5%)
Earnings from operations	10,601	19,020	(44.3%)	21,210		30,044	(29.4%)
Foreign exchange gain	-	748		348		739
Interest expense	(4,871)	(4,939)	1.4%	(9,975)		(10,070)	0.9%
Earnings before income taxes	$    5,730	$  14,829	(61.4%)	$  11,583		$  20,713	(44.1%)
Segment Gross Margins
as a % of Revenues
Service center distribution	26.0%	26.7%		26.0%		26.6%
Energy sector distribution	9.0%	13.0%		10.5%		13.8%
Steel import/export	9.2%	15.0%		9.6%		13.4%
Total	19.3%	21.9%		19.1%		21.2%
Segment Operating Profits
as a % of Revenues
Service center distribution	3.9%	4.9%		3.5%		4.1%
Energy sector distribution	2.1%	4.2%		3.6%		4.8%
Steel import/export	3.4%	7.6%		3.8%		6.6%
Earnings from operations	3.1%	5.4%		3.0%		4.4%

Service Center Distribution

a)     Description of operations

The Company provides processing and distribution services to a broad base of approximately 15,000 end users through a network of 42 Canadian and 4 U.S. locations.  The Company's network of service centers carries a full line of products in a wide range of sizes, shapes and specifications, including carbon hot rolled and cold finished steel, pipe and tubular products, stainless steel and aluminum. Russel Metals purchases these products primarily from steel producers in North America and packages them in accordance with end user specifications. The Company services all major geographic regions of Canada and selected regions in the United States.  Within Canada, the service centers operate under the names Russel Metals, Métaux Russel, Drummond McCall, A. J. Forsyth and Vantage Laser. Heavy gauge flat rolled operations are conducted by B&T Steel and McCabe Steel, both located in Hamilton, Ontario. Russel Metals' U.S. service center operations are conducted under the names Russel Metals Williams Bahcall and Baldwin International.  The Williams Bahcall operations focus primarily on the distribution of general line carbon products through three facilities in Wisconsin. Baldwin International distributes specialty alloy products through its facility in Ohio.

In September 2002, the Company purchased the operating assets of a service center located in Milwaukee, Wisconsin formerly known as Williams Steel.  This operation has been combined with the Russel Metals Bahcall operations.  Williams Steel had sales of approximately $49 million for the year prior to the acquisition date.

b)     Factors affecting results

External --

·      steel pricing fluctuates significantly throughout the cycle.  Steel prices are influenced by overall demand and by product availability.

·      demand is significantly affected by economic cycles with revenues and operating profit fluctuating with the level of general business activity in the markets served.

·      product availability is affected by supply side management practiced by steel producers in North America and international supply and demand which impacts steel imports.

·      trade sanctions initiated either by steel mills or the public sector in North America, and less directly worldwide.

·      Canadian steel service centers, which represent a large portion of the service center distribution segment operations, are particularly affected by general economic conditions and the manufacturing sector in Ontario and Quebec, and by pulp and paper, agriculture and resource sector activities in Western Canada, where demand for steel by the construction and capital goods sectors fluctuates considerably during the economic cycle.

Internal --
·	the Company has a strong strategic network of branches across Canada, encompassing all provinces, thus declines in demand in one region may be countered by higher demands in other regions.
·	many employees, including management, receive bonuses based on bottom line results; thus a portion of their compensation is variable and employees are motivated to maximize profitability.
·	a large portion of the service center costs are fixed and are not reduced as volume declines, which can negatively impact results when demand weakens.
·	the Company monitors its inventory levels and endeavors to achieve above average inventory turns in order to position itself to react to pricing and supply changes in the market and to minimize holding losses.  The above average turns mean the Company is able to reduce the impact of price changes and stabilize its earnings stream, which results in stronger earnings in a downturn and compared to our competitors slightly lower earnings increases when prices increase.
·	knowledge of international pricing trends obtained by the steel import/export operations provides insight for pricing and buying decisions.

c)	Service center segment results -- Three Months Ended
	June 30, 2003 compared to Three Months Ended
	June 30, 2002

Revenues in the second quarter of 2003 decreased 0.9% due to lower volumes east of Alberta compared to the second quarter of 2002 partially offset by higher selling prices.  Higher volumes coupled with modest selling price increases were experienced in both Alberta and British Columbia. Williams Bahcall volumes were higher due to the Williams acquisition, but the operation continued to experience weakness due to general weak customer demand in the Wisconsin region.   Selling prices for the second quarter of 2003 were at the level experienced during the second half of 2002 which were significantly higher than the second quarter of 2002 due to mill price increases that were passed on to customers.  Gross margins decreased from 26.7% in the second quarter of 2002 to 26.0% in the second quarter of 2003.

Service center operating profits in the second quarter of 2003 decreased by 21.2% compared to the second quarter of 2002.  This decrease is a result of lower gross margins, lower volumes and higher expenses compared to the second quarter of 2002.  Operating expenses in the second quarter of 2003 were $42.6 million, or 0.4% higher than the second quarter of 2002.  Operating costs at Canadian operations are down; however, operating costs at Williams Bahcall, with the addition of Williams during September 2002, are approximately $1.2 million higher for the second quarter of 2003 compared to the second quarter of 2002.

Operating profits as a percentage of revenues in the second quarter of 2003 were 3.9% compared to 4.9% in the second quarter of 2002.

GRAPHS OMITTED

d)	Service center segment results -- Six Months Ended
	June 30, 2003 compared to Six Months Ended
	June 30, 2002

Revenues for the six months ended June 30, 2003 increased 3.7% due to higher selling prices in all regions compared to the six months ended June 30, 2002 partially offset by lower volumes east of Alberta.  Volume declines were most significant in Atlantic Canada, Quebec and the flat rolled operation.  Williams Bahcall volumes were higher due to the Williams acquisition, but the operation continued to experience weakness due to general weak customer demand in the Wisconsin region.  Selling prices for the six months ended June 30, 2003 were at the level experienced during the second half of 2002 which were significantly higher than the six months ended June 30, 2002 due to mill price increases.  Gross margins decreased from 26.6% for the six months ended June 30, 2002 to 26.0% for the six months ended June 30, 2003 due to higher inventory costs.

Service center operating profits in the six months ended June 30, 2003 decreased by 12.3% compared to the six months ended June 30, 2002.  This decrease is a result of the volume declines compared to the six months ended June 30, 2002.  Operating expenses for the six months ended June 30, 2003 of $87.0 million, were 4.0% lower than the six months ended June 30, 2002.  Operating costs at Williams Bahcall, with the addition of Williams during September 2002, are approximately $3.1 million higher for the six months ended June 30, 2003 compared to the six months ended June 30, 2002.  Employee termination costs and costs of relocating equipment have been charged to the restructuring accrual recorded in the fourth quarter of 2002.

Operating profits as a percentage of revenues in the six months ended June 30, 2003 were 3.5% compared to 4.1% in the six months ended June 30, 2002.

GRAPHS OMITTED

Energy Sector Distribution

a)     Description of operations

These operations distribute pipe, tube, valves and fittings, primarily to the energy sector in Western Canada and the Western United States, from 5 Canadian and 2 U.S. locations. Russel Metals purchases these products either from the pipe processing arms of North American steel mills or from independent manufacturers of pipe and its accessories. The energy sector operates under the names Comco Pipe and Supply Company, Fedmet Tubulars, Triumph Tubular & Supply, Pioneer Pipe and Spartan Steel.

b)     Factors affecting results

External --
·	affected by economic cycles.
·	significantly affected by oil and gas pricing, which impacts oil rig count and subsequent drilling activities particularly in Western Canada.
·	Canadian operations affected by U.S. dollar since some products are sourced outside Canada and are priced in U.S. dollars.
·	pricing is influenced by overall demand and by product availability.
·	trade sanctions initiated either by steel mills or the public sector in North America.
Internal --
·	low fixed costs due to a large portion of inventory stored at locations rented on a usage basis.
·	employees' compensation is highly variable as it is based on profits, allowing the Company to be profitable throughout the cycle.

c)	Energy sector distribution results -- Three Months Ended
	June 30, 2003 compared to Three Months Ended
	June 30, 2002

Energy sector revenues increased 5.4% in the second quarter of 2003 compared to the second quarter of 2002.  Higher oil and gas prices for the second quarter of 2003 compared to the second quarter of 2002 have resulted in some volume increases for the oil country tubular operations in Western Canada.  Comco Pipe, which distributes pipe, valves and fittings to other fluid handling industries as well as the energy sector, had decreased revenue of 10.9% in the second quarter of 2003 compared to the second quarter of 2002.  Comco had increased revenues from large projects during 2002.

Energy sector operating profits decreased by 47.6% in the second quarter of 2003, compared to the second quarter of 2002.  The decrease is related to lower volumes and profitability in our Canadian line pipe operations and weakness in the U.S. operations.

GRAPHS OMITTED

d)	Energy sector distribution results -- Six Months Ended
	June 30, 2003 compared to Six Months Ended
	June 30, 2002

Energy sector revenues increased 9.5% in the six months ended June 30, 2003 compared to the six months ended June 30, 2002.  Higher oil and gas prices for the six months ended June 30, 2003 compared to the six months ended June 30, 2002 have resulted in some volume increases for the oil country tubular operations in Western Canada.  The activity in this area was not as strong as we would anticipate based on the oil and gas prices.

Energy sector operating profits decreased by 17.0% in the six months ended June 30, 2003, compared to the six months ended June 30, 2002.  The decrease is mainly related to weakness in the U.S. operations.

GRAPHS OMITTED

Steel Import/Export

a)     Description of operations

Russel Metals' steel import/export business primarily imports foreign steel products into Canada and the United States.  It also exports steel from Canada and the United States.  The international presence provides the Company's other business segments with valuable insight regarding international pricing trends and their potential impact on steel markets in North America.

The main steel products sourced by the import/export operations are structural beam, plate, coils, pipe and tubing.  The operations in this sector are Wirth Steel and Sunbelt Group.

b)     Factors affecting results

External --
·	trade sanctions initiated either by steel mills or the public sectors in North America.
·	mill capacity by product line in North America.
·	Canadian operations affected by movement in the U.S. dollar since purchases are mainly in U.S. dollars.
·	steel pricing is influenced by overall demand and by product availability both domestically and worldwide.
·	demand is affected by economic cycles.
·	supply side management practiced by steel producers in North America and international supply and demand, which impacts steel imports and significantly affects product availability.
Internal --
·	operating costs are variable with volume, since inventory is stored in public warehouses and employees are significantly compensated based on earnings.
·	inventory is sourced throughout the world, including North America, providing flexibility for sourcing supply.

c)	Steel import/export results -- Three Months Ended
	June 30, 2003 compared to Three Months Ended
	June 30, 2002

Steel import/export revenues decreased 14.6% in the second quarter of 2003 compared to the second quarter of 2002.  Selling prices in the second quarter of 2003 have decreased compared to the high selling prices experienced in 2002.  Weak demand, excess U.S. mill supply of certain products resulting in lower selling prices and the lower U.S. dollar against other currencies contributed to the reduced revenue and gross margin in the second quarter of 2003 compared to the second quarter of 2002.  Gross margins as a percent of revenue at 9.2% for the second quarter of 2003 returned to more normal levels than those reported for the second quarter of 2002.  The high margins experienced in the second quarter of 2002 related to U.S. trade action induced mill price increases on flat rolled steel, which resulted in higher selling prices and margins due to lower priced inventories on hand.

Steel import/export operating profits decreased by 61.5% in the second quarter of 2003 compared to the second quarter of 2002.  The return to more normal margins was the most significant contributor to this decrease.  The gross margin decrease resulted in operating profit as a percentage of revenue decreasing from 7.6% for the second quarter of 2002 to 3.4% for the second quarter of 2003.

GRAPHS OMITTED

d)	Steel import/export results -- Six Months Ended
	June 30, 2003 compared to Six Months Ended
	June 30, 2002

Steel import/export revenues increased 2.0% in the six months ended June 30, 2003 compared to the six months ended June 30, 2002.  Volumes in the six months ended June 30, 2003 were higher than the six months ended June 30, 2002 due to low volumes in the first quarter of 2002 caused by uncertainty about dumping actions.  The gross margins as a percent of revenue at 9.6% for the six months ended June 30, 2003 returned to more normal levels than those reported for the six months ended June 30, 2002.  The high margins experienced in the six months ended June 30, 2002 related to mill price increases on flat rolled steel, which resulted in higher selling prices for inventories on hand.

As anticipated, the import/export operations have reduced their inventories by $43.5 million since December 31, 2002.

Steel import/export operating profits decreased by 40.7% in the six months ended June 30, 2003 compared to the six months ended June 30, 2002.  The return to more normal margins was the most significant contributor to this decrease.  The gross margin decrease resulted in operating profit as a percentage of revenue decreasing from 6.6% for the six months ended June 30, 2002 to 3.8% for the six months ended June 30, 2003.

GRAPHS OMITTED

Other --Three Months Ended June 30, 2003 compared to
Three Months Ended June 30, 2002

Other revenue and income represents the results of the Company's coal handling terminal in Thunder Bay.  Revenue in the second quarter of 2003 was lower than the second quarter of 2002 due to decreased coal volumes.

Consolidated Results -- Three Months Ended June 30, 2003
compared to Three Months Ended June 30, 2002

Earnings from operations were $10.6 million in the second quarter of 2003, compared to $19.0 million for the second quarter of 2002.  Operating profit declines in all segments were experienced due to lower volumes and gross margin declines as a result of general economic weakness in North America.  Consolidated revenues for the entire Company decreased by 3.3%, to $339.8 million, in the second quarter of 2003 compared to the second quarter of 2002.

Consolidated interest expense in the second quarter of 2003 was virtually unchanged compared to the second quarter of 2002. This is due to higher short-term debt outstanding offset by lower exchange rates on U.S. denominated long-term debt in the second quarter of 2003 compared to the second quarter of 2002.  The majority of the interest expense relates to the fixed term 10% Senior Notes and, thus does not fluctuate with prime borrowing rates available through the bank credit facility.

Income taxes in the second quarter of 2003 were $2.2 million compared to $5.7 million in the second quarter of 2002 due to lower earnings.

Net income for the second quarter of 2003 was $3.6 million compared to $9.1 million for the second quarter of 2002.

Basic earnings per share for the second quarter of 2003 was $0.08 compared to $0.22 in 2002.

GRAPH OMITTED

Consolidated Results -- Six Months Ended June 30, 2003
compared to Six Months Ended June 30, 2002

Earnings from operations were $21.2 million in the six months ended June 30, 2003, compared to $30.0 million for the six months ended June 30, 2002.  Operating profits declined in all segments mainly related to gross margin declines.  Consolidated revenues for the entire Company increased by 4.3%, to $706.8 million, in the six months ended June 30, 2003 compared to the six months ended June 30, 2002.

Consolidated interest expense in the six months ended June 30, 2003 was virtually unchanged compared to the six months ended June 30, 2002. This is due to higher short-term debt outstanding offset by lower exchange rates on U.S. denominated long-term debt in the six months ended June 30, 2003 compared to the six months ended June 30, 2002.  The majority of the interest expense relates to the fixed term 10% Senior Notes and, thus does not fluctuate with prime borrowing rates available through the bank credit facility.

Income taxes in the six months ended June 30, 2003 were $4.4 million compared to $8.1 million in the six months ended June 30, 2002 due to lower earnings.  The tax rate declined from 39.1% to 38.2% related primarily to a lower effective tax rate caused by previously enacted Canadian tax rate decreases.

Net income for the six months ended June 30, 2003 was $7.2 million compared to $12.6 million for the six months ended June 30, 2002.

Basic earnings per share for the six months ended June 30, 2003 was $0.16 and for six months ended June 30, 2002 was $0.30.

GRAPH OMITTED

Interest Expense

The following table shows the components of interest expense.

	Quarters Ended		Six Months Ended
	June 30,		June 30,
(in thousands of dollars)	2003	2002	2003	2002
Interest on long-term debt	$4,817	$5,102	$9,786	$10,296
Other interest (income)	54	(163)	189	(226)
Total interest	$4,871	$4,939	$9,975	$10,070

The long-term debt interest expense relates to the 10% Senior Notes and the 8% Debentures.  The Company currently has no floating rate long-term debt.  The decrease in the long-term debt interest relates to lower interest costs due to the lower foreign exchange on the U.S. denominated debt interest.

GRAPH OMITTED

Coverage Ratio

Russel Metals' interest coverage ratio for 2003 continued to be strong.  The Company's ability to meet interest payments for the next two years remains strong.  The coverage ratios set forth below are calculated using earnings from operations before interest, income taxes, depreciation and amortization (EBITDA) excluding restructuring costs and foreign exchange gain (loss).

Coverage Ratio	Quarters Ended		Twelve Months
(in thousands of dollars,	June 30,		Ended June 30,
except ratios)	2003	2002	2003	2002
EBITDA, as adjusted	$14,186	$22,819	$76,306	$68,732
Interest expense	4,871	4,939	20,229	20,427
Coverage ratio	2.9x	4.6x	3.8x	3.4x

EBITDA and coverage ratios are provided to assist readers in determining the ability of Russel Metals to generate cash from operations to cover financial charges, income taxes and items not considered to be in the ordinary course of business.

GRAPH OMITTED

Accounting Policies and Estimates

The preparation of the Company's financial statements requires management to make estimates and judgements that affect the reported amounts.  On an ongoing basis, the Company evaluates its estimates, including those related to bad debts, inventories, fixed asset lives, income taxes, restructuring costs, pensions and other post-retirement benefits, environmental, contingencies and litigation.  The Company bases its estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources.  Actual results may differ from these estimates under different assumptions or conditions.

The Company's most significant assets consist of accounts receivable and inventory.  The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments.  If the financial condition of the Company's customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.  The Company reviews its inventory for obsolescence and to ensure that the cost of inventory is not in excess of the estimated market value.  Inventory reserves or write downs are recorded if required.

The Company continues to use the intrinsic value-based method for stock-based compensation.  If the Company had adopted the fair value-based accounting method effective January 1, 2002 and expensed stock options issued in 2002 and 2003 the amount expensed would have been $91,000 for the second quarter of 2003 and $175,000 for the six months ended June 30, 2003, which both represent less than $0.01 per share.  The Company intends to change its policy to the fair value-based accounting method; however, since the change would not be material, the Company is waiting for the proposed new Canadian pronouncements to be finalized.

Capital Expenditures

Capital expenditures in the six months ended June 30, 2003 were $10.5 million compared to $5.4 million in the six months ended June 30, 2002. Russel Metals' normal capital expenditures are mainly related to maintenance capital, the purchase of additional processing equipment across a broad base of the operations and upgrades to its existing facilities and computer systems.  During the six months ended June 30, 2003, the Company expended $5.6 million on the relocation of B&T Steel mainly related to deposits on new machinery and equipment, construction of the building and the land.  The total expenditure is projected to be $29 million.

Depreciation expense was $6.6 million in the six months ended June 30, 2003 and $7.1 million in the six months ended June 30, 2002.

Liquidity

Russel Metals stresses working capital management to ensure working capital is minimized and leverage reduced in an economic downturn.  As anticipated, since year end the Company reduced the temporary year end inventory bulge significantly. It is anticipated that the economy will improve slightly in the second half of 2003 and working capital employed by Russel Metals will increase.  The amount of cash used during 2003 by Russel Metals' current operations will be dependent on the strength of the economic recovery.  See the description under the caption Subsequent Event, for details on cash used for the acquisition of Acier Leroux in July 2003.

Inventory and accounts receivable represent 75.8% of total assets at June 30, 2003, approximately the same as year end.  If the economic activity in the economy increases, current assets will become an increased percentage of total assets due to the expansion of inventory and accounts receivable levels to support the increased revenues.  Fixed assets utilized in the operations of the Company are very stable and, excluding the B&T Steel relocation, capital spending is expected to be lower than depreciation.

The balances disclosed in the consolidated cash flow statements are adjusted to remove the non-cash component related to foreign exchange rate changes impacting inventory, accounts receivable, accounts payable and income tax balances of the U.S. operations.

The Company's cash position, at June 30, 2003 was $17.9 million.  The Company had a net cash position, cash less bank indebtedness, of $3.9 million at December 31, 2002.

During the quarter ended June 30, 2003, cash generated from operating profits was $6.5million and from changes in working capital was $18.0 million.  For the six months ended June 30, 2003, cash generated from operating profits was $14.8 million and from changes in working capital was $11.9 million.

Inventory levels improved and the reduction generated cash of $48.8 million since December 31, 2002, mainly due to lower import/export and energy inventories.  Inventory turns for the second quarter of 2003 remained consistent with the first quarter of 2003 as inventory levels were reduced with revenue reductions.

Inventory Turns

	Quarters Ended,
		Jun 30,	Mar 31,	Dec 31,	Sep 30,	Jun 30,
		2003	2003	2002	2002	2002
Service center distribution		4.5	4.4	4.2	4.2	4.8
Energy sector distribution		3.9	4.2	3.4	3.9	3.3
Steel import/export		4.0	4.2	2.7	4.6	5.5
Total		4.2	4.3	3.5	4.2	4.5

Inventory turns are calculated using the cost of sales for the quarter annualized divided by the ending inventory position.

Service center inventory turns improved to 4.5.  This can be compared with the service center industry turns estimated to be 3.6 for the three months ended May 31, 2003 as derived from the monthly Metals Activity Report published for the United States by the Metals Service Center Institute.  It is management’s goal to achieve service center inventory turns at significantly higher levels than the industry norm.

The other major component of working capital is accounts payable and accrued liabilities, which decreased compared to December 31, 2002, utilizing cash of $11.9 million.  Payables decreased mainly due to lower trade payables in the import/export operations caused by lower inventory purchases.  At December 31, 2002, the Company had high trade payables related to inventory in this sector.  During the second quarter of 2003, accounts payable increased generating cash of $9.9 million.  Inventory reductions have stabilized and thus purchases have returned to normal levels.

During the second quarter of 2003, the Company utilized cash of $6.2 million on capital expenditures and $3.2 million on common and preferred share dividends.  During the six months ended June 30, 2003, the Company utilized cash of $10.5 million on capital expenditures and $6.5 million on common and preferred share dividends.

For several years, the Company's cash flow has been positively impacted by its ability to utilize income tax losses.  In 2003, the Company is required to make payments related to 2002 as well as installments for 2003.  The Company made income tax payments of $5.5 million in the first six months of 2003.  Payments for the remainder of the year are estimated to be $1.6 million; however, this amount may vary based on earnings.

The Company will be relocating its B&T Steel operation in Hamilton, Ontario during the fourth quarter of 2003.  The Company anticipates spending $29 million for land, building, machinery and equipment for the new location.  These commitments resulted in payments of $3.8 million in the second quarter of 2003 and $5.8 million for the six months ended June 30, 2003.

Debt and Credit Facilities

The Company manages its cash position based on bank borrowings net of cash.  The bank credit facilities table provides the split between loans and cash on deposit.

Bank Credit Facilities
($ millions)	Syndicate	U.S.	Total
Bank loans	$      -	$   0.4	$    0.4
On deposit	15.5	2.7	18.2
Net borrowings (cash)	(15.5)	(2.3)	(17.8)
Letters of credit	13.0	2.8	15.8
	$  (2.5)	$   0.5	$ (2.5)
Facility availability	$228.4	$ 47.4	$275.8

The Company has two long-term debt instruments outstanding.  The $30 million 8% Subordinated Debentures mature in 2006.  The 10% Senior Notes mature in 2009.  The balance outstanding at June 30, 2003 is US $115.6 million, unchanged from December 31, 2002.  The Canadian dollar equivalent of the Senior Notes fluctuates with the exchange rate.  At June 30, 2003, the long-term debt balance is $186.7 million.

Russel Metals has a bank credit facility with a syndicate of Canadian and U.S. banks.  The $253.8 million facility may be extended for an additional one year period on each anniversary, with the consent of the banks. Russel Metals has extended the facility to June 19, 2005.  Russel Metals is entitled to borrow under this facility, on a revolving basis, up to an amount equal to the sum of specified percentages of eligible accounts receivable and inventories, to a maximum of $253.8 million.  At June 30, 2003, Russel Metals was entitled to borrow $228.4 million, including letters of credit under this facility.  At June 30, 2003, Russel Metals had no borrowings and had $13.0 million in letters of credit under this facility.  At June 30, 2002, Russel Metals had no borrowings and $21.4 million in letters of credit under this facility.

In addition, certain U.S. subsidiaries of Russel Metals have their own one year bank credit facility.  The maximum borrowing under this facility is US $35.0 million.  At June 30, 2003, these subsidiaries had borrowings of US $0.3 million and letters of credit of US $2.1 million.  At June 30, 2002, these subsidiaries had no borrowings and letters of credit of US $8.6 million.

Based on Russel Metals' current financial position, anticipated expenditures relating to the acquisition of Acier Leroux, operating results and absence of scheduled debt maturities, Russel Metals believes that it will generate a sufficient amount of cash flow to pay all of its preferred share dividends, interest obligations and operating costs as they become due during the next two years.

GRAPH OMITTED

Dividends and Share Capital

The ability to pay dividends on common shares is impacted by restrictions associated with the 10% Senior Notes due June 2009.  Dividends on common shares and the repurchase of common and preferred shares are considered to be restricted payments under the Note Indenture.  During the second quarter of 2003, the Company paid a common share dividend of $0.07 per share resulting in a payment of $2.7 million in the quarter.  At June 30, 2003, the Company had $8.5 million available for restricted payments such as the common share dividend.  The acquisition of Acier Leroux in July 2003 described under the caption Subsequent Event resulted in the issuance of 3,546,874 common shares of Russel Metals, which adds $18.1 million to the amount available for restricted payments.

A quarterly dividend on common shares of $0.07 per share was declared in the third quarter.  The dividend is payable September 15, 2003 and the date of record is August 6, 2003.

The ability to make restricted payments is adjusted quarterly by 50% of the quarterly net income or loss.  Net income is adjusted for certain exclusions that include: extraordinary items, gains or losses on asset dispositions and unrealized foreign exchange gains and losses.  In addition to adjustments due to net income, the ability to make restricted payments is enhanced by the proceeds on the issuance of share capital.

As at July 24, 2003, the Company has 41,723,975 common shares and 1,200,000 class II preferred shares outstanding which reflects the common shares issued pursuant to the Acier Leroux transaction.

Vision and Strategy

The metals distribution business is a segment of a mature, cyclical industry -- steel.  The use of distributors by both manufacturers and end users of steel continues to grow.  This is evidenced by the growth in the percentage of total steel shipments from steel producers to distributors.  As the distribution segment's share of steel industry shipments continues to grow, steel distributors such as Russel Metals can grow their business over the course of a cycle.

Russel Metals strives to deal with the cyclical nature of the business by operating with the lowest possible net assets throughout the course of a cycle.  In addition, its aim is to be more profitable through the various successive peaks and troughs as the steel cycles progress.  In order to achieve this, management emphasizes profitability rather than revenue growth.  This intensive asset management reduces borrowings and therefore interest expense in declining periods in the economic cycle and creates more stable returns on net assets over the course of the cycle.  Our conservative management approach creates relatively stronger trough earnings but could cause peak earnings to be somewhat muted.  Management strongly believes that it is more prudent to be profitable throughout a cycle, without the spikes in earnings caused by less emphasis on asset management, and have average earnings over the full range of the cycle in the top decile of the industry.

Growth from selective acquisitions is also a core management philosophy. The Company focuses on investment opportunities in businesses that have dominant market niches or provide mass to existing Russel Metals operations.  On July 3, 2003, the Company successfully completed the Acier Leroux acquisition.  The Company believes it required stronger market positions in Quebec and Ontario and believes the Acier Leroux acquisition provides the market presence desired in Quebec.

In the energy and import/export segments all of the companies in the Russel Metals group have significant operations in the market niche that they service. Consistent with our acquisition philosophy, any new acquisitions in these areas could likely be either major stand alone operations or complements to existing operations.

In the future, the length of the steel-based economic cycle will continue to shorten and a management structure that allows the fastest reaction to the changes will be the most successful.  The Company will continue to invest in business systems to enable faster reaction times to changing business conditions.  In addition, management believes the high level of service and flexibility provided by service centers will enable this distribution channel to capture an increasing percentage of total steel revenues to end users, allowing for increased growth within the sector.

Subsequent Event

On May 14, 2003, the Company made a take-over bid for all of the issued and outstanding Class A Multiple Voting Shares and Class B Subordinate Voting Shares of Acier Leroux inc. for consideration of $6.30 per share, payable at the option of the holder in one of three ways.  Each holder of an Acier Leroux share had the option of receiving, for each Acier Leroux share held, (i) $6.30 cash, (ii) $4.60 cash and one-third of a Russel Metals common share or (iii) 1.2353 Russel Metals common shares, subject to pro-ration if the number of common shares of Russel Metals otherwise issuable would exceed 3,612,672.  In addition, the bid was for all of the 8% unsecured convertible debentures and the 7.25% unsecured convertible debentures.

On July 3, 2003, the Company acquired 99.52% of the outstanding Class A shares, 97.53% of the outstanding Class B shares, 86.61% of the outstanding 8% unsecured convertible debentures and 87.2% of the outstanding 7.25% unsecured convertible debentures.  The Company issued 3,546,874 common shares of Russel Metals and paid $65.6 million in cash pursuant to the offers.  The Company has initiated the process to acquire 100% ownership of Acier Leroux under the provisions of the Companies Act (Quebec) and to cause Acier Leroux to redeem the remaining debentures.

Acier Leroux specializes in the processing and distribution of steel products including reinforcing steel, steel bars, angles, channels, beams, tubing, pipes, plates and hot rolled sheets from 22 service center locations mainly in Ontario, Quebec, New Brunswick and Nova Scotia.

The total consideration to be paid for 100% of the Class A shares, the Class B shares, the 8% unsecured convertible debentures and the 7.25% unsecured convertible debentures of Acier Leroux is approximately $87 million, including the value of the common shares of Russel Metals issued.

In addition, Russel Metals assumed the Acier Leroux bank debt of approximately $109 million.

Outlook

Currently, business conditions in Canada and the United States are at best, uncertain.  We look forward to improvement in the energy sector but both our service centre and import/export sectors are experiencing weak demand.   With the increased capacity of steel mill products available in the United States, pricing has tumbled dramatically and unless supply becomes balanced with demand, there is no apparent recovery in sight.

Furthermore, with the strengthening of the Canadian dollar, our Canadian customers could become less competitive in that portion of their business that ships finished products to the U.S.  This could put pressure on the Canadian economy and directly impacts us.

The task of integrating the Russel Metals and Acier Leroux operations is currently underway and it is anticipated that the rationalization will be substantially completed by early 2004.

EX-99

RUSSEL METALS INC.
CONSOLIDATED BALANCE SHEETS
(UNAUDITED)
		June 30,	Dec. 31,
($000)		2003	2002
ASSETS
Current
Cash		$    17,872	$    25,068
Accounts receivable		218,246	201,675
Inventories		265,949	329,415
Prepaid expenses and other assets		5,180	6,077
Income taxes recoverable		1,913	1,306
		509,160	563,541
Property, Plant and Equipment		111,194	110,512
Deferred Financing Charges		4,169	4,962
Goodwill		2,295	2,709
Future Income Tax Assets		9,679	10,698
Other Assets		2,234	3,172
		$  638,731	$  695,594
LIABILITIES AND SHAREHOLDERS' EQUITY
Current
Bank indebtedness		$             -	$   21,141
Accounts payable and accrued liabilities		171,532	188,585
Current income taxes payable		1,942	2,487
		173,474	212,213
Long-Term Debt		186,673	212,602
Pensions and Benefits		9,902	9,590
Future Income Tax Liabilities		15,171	8,749
		385,220	443,154
Shareholders' Equity
Preferred shares		30,000	30,000
Shareholders' equity		223,511	222,440
		253,511	252,440
		$  638,731	$  695,594
On Behalf of the Board,
(Signed) Carl R. Fiora	(Signed) Arni C. Thorsteinson
Director	Director

RUSSEL METALS INC.
CONSOLIDATED STATEMENTS OF EARNINGS AND RETAINED EARNINGS
(UNAUDITED)
	Quarters ended		Six Months Ended
	June 30,		June 30,
($000, except per share data and number of shares)	2003	2002	2003	2002
Segment Revenues
Service center distribution	$   192,345	$   194,098	$   386,558	$   372,610
Energy sector distribution	71,152	67,516	154,941	141,543
Steel import/export	72,598	85,046	160,267	157,122
Other	3,661	4,863	5,011	6,111
	$   339,756	$   351,523	$   706,777	$   677,386
Segment Operating Profits
Service center distribution	$       7,448	$       9,450	$      13,520	$     15,418
Energy sector distribution	1,486	2,836	5,653	6,814
Steel import/export	2,483	6,443	6,133	10,344
Other	1,360	2,490	390	1,720
Corporate expenses	(2,176)	(2,199)	(4,486)	(4,252)
Earnings before the following	10,601	19,020	21,210	30,044
Foreign exchange gain	-	748	348	739
Interest expense	(4,871)	(4,939)	(9,975)	(10,070)
Earnings before income taxes	5,730	14,829	11,583	20,713
Provision for income taxes	(2,155)	(5,727)	(4,421)	(8,097)
Net earnings for the period	3,575	9,102	7,162	12,616
Retained earnings --
Dividends on preferred shares	(562)	(562)	(1,125)	(1,125)
Earnings available to common
shareholders	3,013	8,540	6,037	11,491
Dividends on common shares	(2,670)	(1,900)	(5,337)	(1,900)
Retained earnings, beginning of the period	106,215	88,289	105,858	100,461
Adjustment for goodwill impairment	-	-	-	(15,123)
Retained earnings, end of the period	$  106,558	$    94,929	$  106,558	$    94,929
Basic earnings per common share	$        0.08	$        0.22	$        0.16	$        0.30
Diluted earnings per common share	$        0.08	$        0.21	$        0.16	$        0.29
Number of Shares
Common shares
Average for the period
Basic	38,150,722	38,009,506	38,115,382	37,995,581
Diluted	41,431,322	39,975,006	40,818,482	39,706,081
End of the period	38,175,601	38,045,501	38,175,601	38,045,501
Class II preferred shares, Series C	1,200,000	1,200,000	1,200,000	1,200,000

RUSSEL METALS INC.
CONSOLIDATED CASH FLOW STATEMENTS
(UNAUDITED)
	Quarters ended		Six Months Ended
	June 30,		June 30,
($000)	2003	2002	2003	2002
Operating activities
Net earnings for the period	$      3,575	$      9,102	$      7,162	$    12,616
Depreciation and amortization	3,585	3,799	7,201	7,664
Future income taxes	(618)	3,797	437	4,918
Loss (gain) on sale of fixed assets	(7)	(88)	8	34
Foreign exchange gain	-	(748)	-	(739)
Cash from operating activities before
working capital	$      6,535	$     15,862	$      14,808	$    24,493
Changes in non-cash working capital items
Accounts receivable	1,366	(7,677)	(24,447)	(19,339)
Inventories	9,579	(8,824)	48,835	15,946
Accounts payable and accrued liabilities	9,851	6,403	(11,828)	18,691
Current income taxes	(2,560)	3,098	(1,526)	3,102
Other	(220)	(677)	897	(235)
Change in non-cash working capital	18,016	(7,677)	11,931	18,165
Cash from operating activities	24,551	8,185	26,739	42,658
Financing activities
Decrease in bank borrowing	(12,259)	-	(21,141)	-
Issue of common shares	219	215	431	215
Dividends on common shares	(2,670)	(1,900)	(5,337)	(1,900)
Dividends on preferred shares	(562)	(562)	(1,125)	(1,125)
Cash used in financing activities	(15,272)	(2,247)	(27,172)	(2,810)
Investing activities
Purchase of business	-	-	-	(4,387)
Purchase of fixed assets	(6,219)	(4,099)	(10,452)	(5,399)
Proceeds on sale of fixed assets	124	1,397	145	2,233
Other	4,083	(2,582)	3,544	(2,330)
Cash used in investing activities	(2,012)	(5,284)	(6,763)	(9,883)
Increase (decrease) in cash	7,267	654	(7,196)	29,965
Cash position, beginning of the period	10,605	46,462	25,068	17,151
Cash position, end of the period	$   17,872	$   47,116	$   17,872	$   47,116
Supplemental information:
Interest Paid	$     9,397	$   10,197	$     9,613	$   10,122
Income Taxes Paid	$     1,725	$     1,255	$     5,540	$     2,462

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
JUNE 30, 2003
1.	These interim consolidated financial statements have been prepared in accordance with Canadian generally accepted accounting principles; however, they do not include all of the disclosure requirements for annual consolidated financial statements.  These interim consolidated financial statements follow the same accounting policies disclosed in note 1 to the 2002 annual consolidated financial statements.  These interim consolidated financial statements should be read in conjunction with the 2002 annual consolidated financial statements including notes thereto.  These interim consolidated financial statements contain all adjustments, consisting of normal recurring adjustments, necessary for a fair presentation of the results for the periods reported.
2.	Economic Cycle
	All three of the metals operating segments are significantly affected by economic cycles.  Revenues and operating profits in the energy sector are also affected by oil and gas drilling in western Canada, which is predominantly carried out during the period from October to March.  For these reasons, the results of operations for the periods shown are not necessarily indicative of the results for the full year.
3.	Interest Expense

	Quarters Ended		Six Months Ended
	June 30,		June 30,
($000)	2003	2002	2003	2002
Interest on long-term debt	$4,817	$5,102	$9,786	$10,296
Other interest expense (income)	54	(163)	189	(226)
Total interest	$4,871	$4,939	$9,975	$10,070

4.	Stock-based Compensation
	During the quarter ended June 30, 2003, the Company issued 60,000 stock options (2002 - 70,000) at an exercise price of $5.47 (2002 - $4.80).  The assumptions used in the Black Scholes option-pricing model are not materially different from those disclosed in Note 11 to the 2002 annual consolidated financial statements.
	Pro-forma net earnings and earnings per share under the fair value-based method of accounting for stock options are as follows:

	Quarters Ended		Six Months Ended
	June 30,		June 30,
($000, except per share data)	2003	2002	2003	2002
Net earnings for the period	$3,396	$ 8,909	$6,810	$12,238
Basic earnings per share	$  0.07	$    0.22	$  0.15	$    0.29
Diluted earnings per share	$  0.07	$    0.21	$  0.15	$    0.28

5.	Subsequent Event
	On July 3, 2003, the Company successfully completed its offers to purchase all of the outstanding Class A multiple voting shares and Class B subordinate voting shares and all of the outstanding 8% convertible unsecured subordinated debentures and 7.25% convertible unsecured subordinated debentures of Acier Leroux inc.  Class A multiple voting shares validly tendered under the offer represented 99.52% of the issued and outstanding Class A shares.  Class B subordinate voting shares validly tendered under the offer represented 97.53% of the issued and outstanding Class B shares.  Debentures validly tendered under the offer represented 86.61% of the outstanding 8% convertible unsecured subordinated debentures and 87.2% of the outstanding 7.25% convertible unsecured subordinated debentures.
	The Company issued 3,546,874 shares and paid $65,631,000 in cash in consideration for the shares and debentures tendered under the offer.  The Company has initiated the process to acquire ownership of 100% of the shares of Acier Leroux under the provisions of the Companies Act (Quebec) as disclosed in its May 14, 2003 Offering Circular.  Acier Leroux is redeeming the remaining debentures effective August 27, 2003.