10-Q

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

þ	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES AND EXCHANGE ACT OF 1934
	For the quarterly period ended March 31, 2005
	or
o	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES AND EXCHANGE ACT OF 1934
	For the transition period from                      to

Commission file number 1-5978

SIFCO Industries, Inc.

(Exact name of registrant as specified in its charter)

Ohio	34-0553950
(State or other jurisdiction of incorporation or organization)	(I.R.S. Employer Identification No.)
970 East 64th Street, Cleveland Ohio	44103
(Address of principal executive offices)	(Zip Code)

(216) 881-8600

(Registrant’s telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by section 13 or 15(d) of the Securities and Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Act). Yes o No þ

The number of the Registrant’s Common Shares outstanding at April 30, 2005 was 5,188,891.

TABLE OF CONTENTS

Part I. Financial Information
	Item 1. Financial Statements
	Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
	Item 3. Quantitative and Qualitative Disclosures About Market Risk
	Item 4. Controls And Procedures
Part II. Other Information
	Item 1. Legal Proceedings
	Item 2. Change in Securities and Use of Proceeds
	Item 3. Defaults Upon Senior Securities
	Item 4. Submission of Matters to a Vote of Security Holders
	Item 5. Other Information
	Item 6. Exhibits
SIGNATURES
EX-31.1 Certification
EX-31.2 Certification
EX-32.1 Certification
EX-32.2 Certification

Part I. Financial Information

Item 1. Financial Statements

SIFCO Industries, Inc. and Subsidiaries
Consolidated Condensed Statements of Operations
(Unaudited)
(Amounts in thousands, except per share data)

	Three Months Ended						Six Months Ended
	March 31,						March 31,
	2005			2004			2005			2004
Net sales	$	19,843		$	22,794		$	38,924		$	43,633
Operating expenses:
Cost of goods sold		18,243			20,414			36,644			38,466
Selling, general and administrative expenses		3,154			2,910			6,176			5,838
Total operating expenses		21,397			23,324			42,820			44,304
Operating loss		(1,554	)		(530	)		(3,896	)		(671	)
Interest income		(15	)		(13	)		(51	)		(26	)
Interest expense		25			198			255			403
Foreign currency exchange loss (gain), net		(230	)		(36	)		71			148
Other income, net		(1	)		(39	)		(6,511	)		(53	)
Income (loss) before income tax provision		(1,333	)		(640	)		2,340			(1,143	)
Income tax provision		23			26			1,338			33
Net income (loss)	$	(1,356	)	$	(666	)	$	1,002		$	(1,176	)
Net income (loss) per share (basic)	$	(0.26	)	$	(0.13	)	$	0.19		$	(0.23	)
Net income (loss) per share (diluted)	$	(0.26	)	$	(0.13	)	$	0.19		$	(0.23	)
Weighted-average number of common shares (basic)		5,225			5,226			5,220			5,226
Weighted-average number of common shares (diluted)		5,233			5,226			5,227			5,226

See notes to unaudited consolidated condensed financial statements.

2

SIFCO Industries, Inc. and Subsidiaries
Consolidated Condensed Balance Sheets
(Amounts in thousands, except per share data)

	March 31,			September 30,
	2005			2004
	(unaudited)
ASSETS
Current Assets:
Cash and cash equivalents	$	2,063		$	5,578
Receivables, net		15,959			17,720
Inventories		10,635			7,845
Deferred income taxes		—			575
Prepaid expenses and other current assets		1,688			1,132
Assets held for sale		—			4,231
Total current assets		30,345			37,081
Property, plant and equipment, net		19,521			19,882
Other assets		2,820			2,796
Total assets	$	52,686		$	59,759
LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
Current maturities of long-term debt	$	2		$	4,569
Accounts payable		10,301			9,354
Accrued liabilities		6,875			7,129
Total current liabilities		17,178			21,052
Long-term debt, net of current maturities		1,137			5,797
Other long-term liabilities		8,122			8,108
Shareholders’ equity:
Serial preferred shares, no par value, authorized 1,000 shares		—			—
Common shares, par value $1 per share, authorized 10,000 shares; issued 5,249 and 5,257 shares at March 31, 2005 and September 30, 2004, respectively; outstanding 5,229 and 5,214 shares at March 31, 2005 and September 30, 2004, respectively		5,249			5,257
Additional paid-in capital		6,384			6,497
Retained earnings		23,338			22,336
Accumulated other comprehensive loss		(8,466	)		(8,867	)
Unearned compensation – restricted common shares		(122	)		(166	)
Common shares held in treasury at cost, 20 and 43 shares at March 31, 2005 and September 30, 2004, respectively		(134	)		(255	)
Total shareholders’ equity		26,249			24,802
Total liabilities and shareholders’ equity	$	52,686		$	59,759

See notes to unaudited consolidated condensed financial statements.

3

SIFCO Industries, Inc. and Subsidiaries
Consolidated Condensed Statements of Cash Flows
(Unaudited)
(Amounts in thousands)

	Six Months Ended
	March,
	2005			2004
Cash flows from operating activities:
Net income (loss)	$	1,002		$	(1,176	)
Adjustments to reconcile net income (loss) to net cash provided by (used for) operating activities:
Depreciation and amortization		1,656			1,753
Loss (gain) on disposal of property, plant and equipment		(6,308	)		10
Deferred income taxes		575			—
Share transactions under employee stock plan		44			53
Asset impairment charges		21			—
Changes in operating assets and liabilities:
Receivables		1,761			872
Inventories		(2,790	)		(169	)
Prepaid expenses and other current assets		(391	)		(585	)
Other assets		(24	)		(262	)
Accounts payable		947			133
Accrued liabilities		(254	)		799
Other long-term liabilities		113			142
Net cash provided by (used for) operating activities		(3,648	)		1,570
Cash flows from investing activities:
Capital expenditures		(1,365	)		(1,326	)
Proceeds from disposal of property, plant and equipment		10,598			50
Reimbursement of equipment expenditures		—			750
Other		128			147
Net cash provided by (used for) investing activities		9,361			(379	)
Cash flows from financing activities:
Proceeds from revolving credit agreement		13,202			27,169
Repayments of revolving credit agreement		(15,185	)		(26,651	)
Repayments of long-term debt		(7,245	)		(600	)
Net cash used for financing activities		(9,228	)		(82	)
Increase (decrease) in cash and cash equivalents		(3,515	)		1,109
Cash and cash equivalents at the beginning of the period		5,578			4,524
Cash and cash equivalents at the end of the period	$	2,063		$	5,633
Supplemental disclosure of cash flow information:
Cash paid for interest	$	(294	)	$	(352	)
Cash recovered from (paid for) income taxes, net		(615	)		34

See notes to unaudited consolidated condensed financial statements.

4

SIFCO Industries, Inc. and Subsidiaries
Notes to Unaudited Consolidated Condensed Financial Statements
(Amounts in thousands, except per share data)

1. Summary of Significant Accounting Policies

A. Principles of Consolidation

The unaudited consolidated condensed financial statements included herein include the accounts of SIFCO Industries, Inc. and its wholly-owned subsidiaries (the “Company”). All significant intercompany accounts and transactions have been eliminated. In the opinion of management, all adjustments, which include only normal recurring adjustments necessary for a fair presentation of the results of operations, financial position, and cash flows for the periods presented, have been included. These unaudited consolidated condensed financial statements should be read in conjunction with the consolidated financial statements and related notes included in the Company’s fiscal 2004 Annual Report on Form 10-K. The results of operations for any interim period are not necessarily indicative of the results to be expected for other interim periods or the full year. Certain prior period amounts have been reclassified in order to conform to current period classifications.

B. Stock-Based Compensation

The Company employs the disclosure-only provisions of Statement of Financial Accounting Standards No. 123, “Accounting for Stock-Based Compensation” (“SFAS No. 123”). The following pro forma information regarding net income and earnings per share was determined as if the Company had accounted for its stock options under the fair value method prescribed by SFAS No. 123. For purposes of pro forma disclosure, the estimated fair value of the stock options is amortized over the options’ vesting periods. The pro forma information is as follows:

	Three Months Ended						Six Months Ended
	March 31,						March 31,
	2005			2004			2005		2004
Net income (loss) as reported	$	(1,356	)	$	(666	)	$	1,002	$	(1,176	)
Less: Stock-based compensation expense determined under fair value based method for all awards		14			28			28		55
Pro forma net income (loss) as if the fair value based method had been applied to all awards	$	(1,370	)	$	(694	)	$	974	$	(1,231	)
Net income (loss) per share:
Basic – as reported	$	(0.26	)	$	(0.13	)	$	0.19	$	(0.23	)
Basic – pro forma	$	(0.26	)	$	(0.13	)	$	0.19	$	(0.24	)
Diluted – as reported	$	(0.26	)	$	(0.13	)	$	0.19	$	(0.23	)
Diluted – pro forma	$	(0.26	)	$	(0.13	)	$	0.19	$	(0.24	)

C. New Accounting Standards

In December 2004, the Financial Accounting Standards Board (“FASB”) issued Statement of Financial Accounting Standards (“SFAS”) No. 123 (revised 2004), “Accounting for Stock-Based Compensation”. This Statement supersedes APB Opinion No. 25, “Accounting for Stock Issued to Employees”, and its related implementation guidance. This Statement establishes standards for the accounting for transactions in which an entity exchanges its equity instruments for goods or services. It also addresses transactions in which an entity incurs liabilities in exchange for goods or services that are based on the fair value of the entity’s equity instruments or that may be settled by the issuance of those equity instruments. This Statement focuses primarily on accounting for transactions in which an entity obtains employee services in share-based payment transactions. This Statement does not change the accounting guidance for share-based payment transactions with parties other than employees provided in Statement 123 as originally issued and EITF Issue No. 96-18, “Accounting for Equity Instruments That Are Issued to Other Than Employees for Acquiring, or in Conjunction with Selling, Goods or Services”. This Statement does not address the accounting for employee share ownership plans, which are subject to AICPA Statement of Position 93-6, “Employers’ Accounting for Employee Stock Ownership Plans”. According to the U.S. Securities and Exchange Commission’s Staff Accounting Bulletin No. 107, SFAS No. 123 (revised 2004) is effective for the

5

Company’s fiscal year 2006. The Company does not expect the adoption of this statement in fiscal year 2006 to have a material impact on the Company’s financial position or results of operations.

In December 2004, the FASB issued SFAS No. 153, “Exchanges of Nonmonetary Assets” - an amendment of Accounting Principles Bulletin (“APB”) Opinion No. 29, “Accounting for Nonmonetary Transactions”. The guidance in APB Opinion No. 29, is based on the principle that exchanges of nonmonetary assets should be measured based on the fair value of the assets exchanged. The guidance in that Opinion, however, included certain exceptions to that principle. SFAS No. 153, amends Opinion No. 29 to eliminate the exception for nonmonetary exchanges of similar productive assets and replaces it with a general exception for exchanges of nonmonetary assets that do not have commercial substance. A nonmonetary exchange has commercial substance if the future cash flows of the entity are expected to change significantly as a result of the exchange. SFAS No. 153 is effective for fiscal periods beginning after June 15, 2005. The Company does not expect the adoption of this statement in fiscal year 2005 to have a material impact on the Company’s financial position or results of operations.

In November 2004, the FASB issued SFAS No. 151, “Inventory Costs” — an amendment of Accounting Research Bulletin No. 43, Chapter 4, “Inventory Pricing”. SFAS No. 151 was issued to clarify the accounting for abnormal amounts of idle facility expense, freight, handling costs, and wasted material (spoilage). Paragraph 5 of ARB 43, Chapter 4, previously stated that “...under some circumstances, items such as idle facility expense, excessive spoilage, double freight, and rehandling costs may be so abnormal as to require treatment as current period charges...” This Statement requires that those items be recognized as current-period charges regardless of whether they meet the criterion of “so abnormal”. In addition, this Statement requires that allocation of fixed production overheads to the costs of conversion be based on the normal capacity of the production facilities. SFAS No. 151 is effective for fiscal years beginning after June 15, 2005. The Company does not expect the adoption of this statement in fiscal year 2006 to have a material impact on the Company’s financial position or results of operations.

2. Inventories

Inventories consist of:

	March 31,		September 30,
	2005		2004
Raw materials and supplies	$	4,122	$	2,566
Work-in-process		3,567		2,821
Finished goods		2,946		2,458
Total inventories	$	10,635	$	7,845

Inventories are stated at the lower of cost or market. Cost is determined using the last-in, first-out (“LIFO”) method for 53% and 31% of the Company’s inventories at March 31, 2005 and September 30, 2004, respectively. Cost is determined using the specific identification method for approximately 20% and 27% of the Company’s inventories at March 31, 2005 and September 30, 2004, respectively. The first-in, first-out (“FIFO”) method is used for the remainder of the inventories. If the FIFO method had been used for the inventories for which cost is determined using the LIFO method, inventories would have been $3,931 and $3,518 higher than reported at March 31, 2005 and September 30, 2004, respectively.

3. Comprehensive Income (Loss) and Accumulated Other Comprehensive Loss

Total comprehensive income (loss) is as follows:

	Three Months Ended						Six Months Ended
	March 31,						March 31,
	2005			2004			2005			2004
Net income (loss)	$	(1,356	)	$	(666	)	$	1,002		$	(1,176	)
Foreign currency translation adjustment		(47	)		32			137			163
Unrealized gain on interest rate swap agreement		—			46			125			124
Currency exchange contract adjustment		(1,190	)		(176	)		166			(124	)
Minimum pension liability adjustment		(27	)		—			(27	)		—
Total comprehensive income (loss)	$	(2,620	)	$	(764	)	$	1,403		$	(1,013	)

6

The components of accumulated other comprehensive loss are as follows:

	March 31,			September 30,
	2005			2004
Foreign currency translation adjustment	$	(6,615	)	$	(6,752	)
Interest rate swap agreement adjustment		—			(125	)
Currency exchange contract adjustment		787			621
Minimum pension liability adjustment		(2,638	)		(2,611	)
Total accumulated other comprehensive loss	$	(8,466	)	$	(8,867	)

4. Business Segments

The Company identifies reportable segments based upon distinct products manufactured and services provided. The Turbine Component Services and Repair Group (“Repair Group”) consists primarily of the repair and remanufacture of aerospace and industrial turbine engine components. The Repair Group is also involved in precision component machining for aerospace applications. The Aerospace Component Manufacturing Group consists of the production, heat treatment and some machining of forgings in various alloys utilizing a variety of processes for application in the aerospace industry. The Applied Surface Concepts (formerly named Metal Finishing) Group is a provider of specialized selective electrochemical metal finishing processes and services used to apply metal coatings to a selective area of a component. The Company’s reportable segments are separately managed.

Segment information is as follows:

	Three Months Ended						Six Months Ended
	March 31,						March 31,
	2005			2004			2005			2004
Net sales:
Turbine Component Services and Repair Group	$	9,863		$	12,278		$	18,675		$	24,002
Aerospace Component Manufacturing Group		6,743			7,862			14,156			14,318
Applied Surface Concepts Group		3,237			2,654			6,093			5,313
Consolidated net sales	$	19,843		$	22,794		$	38,924		$	43,633
Operating income (loss):
Turbine Component Services and Repair Group	$	(722	)	$	(683	)	$	(2,568	)	$	(1,137	)
Aerospace Component Manufacturing Group		(625	)		603			(839	)		967
Applied Surface Concepts Group		425			189			444			417
Corporate unallocated expenses		(632	)		(639	)		(933	)		(918	)
Consolidated operating loss		(1,554	)		(530	)		(3,896	)		(671	)
Interest expense, net		10			185			204			377
Foreign currency exchange loss (gain), net		(230	)		(36	)		71			148
Other income, net		(1	)		(39	)		(6,511	)		(53	)
Consolidated income (loss) before income tax provision	$	(1,333	)	$	(640	)	$	2,340		$	(1,143	)

7

5. Retirement Benefit Plans

The Company and certain of its subsidiaries sponsor defined benefit pension plans covering most of its employees. The components of net periodic benefit cost of the Company’s defined benefit plans are as follows:

	Three Months Ended						Six Months Ended
	March 31,						March 31,
	2005			2004			2005			2004
Service cost	$	180		$	154		$	358		$	306
Interest cost		363			348			724			694
Expected return on plan assets		(425	)		(384	)		(848	)		(766	)
Amortization of transition asset		(2	)		(3	)		(5	)		(5	)
Amortization of prior service cost		33			33			66			66
Amortization of net (gain) loss		26			5			52			9
Net periodic benefit cost	$	175		$	153		$	347		$	304

Through March 31, 2005, the Company has made $611 of contributions to its defined benefit pension plans. The Company anticipates contributing an additional $587 to fund its defined benefit pension plans during the balance of fiscal 2005, resulting in total projected contributions of $1,198 in fiscal 2005.

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Management’s Discussion and Analysis of Financial Condition and Results of Operations may contain various forward-looking statements and includes assumptions concerning the Company’s operations, future results and prospects. These forward-looking statements are based on current expectations and are subject to risk and uncertainties. In connection with the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, the Company provides this cautionary statement identifying important economic, political and technological factors, among others, the absence or effect of which could cause the actual results or events to differ materially from those set forth in or implied by the forward-looking statements and related assumptions. Such factors include the following: (1) future business environment, including capital and consumer spending; (2) competitive factors, including the ability to replace business which may be lost due to increased direct involvement by the turbine engine manufacturers in turbine component service and repair markets; (3) successful procurement of certain repair materials and new repair process licenses from turbine engine manufacturers and/or the Federal Aviation Administration; (4) fluctuating foreign currency (primarily the euro) exchange rates; (5) metals and commodities price increases and the Company’s ability to recover such price increases; (6) successful development and market introductions of new products, including an advanced coating technology and the continued development of industrial turbine repair processes; (7) regressive pricing pressures on the Company’s products and services, with productivity improvements as the primary means to maintain margins; (8) success with the further development of strategic alliances with certain turbine engine manufacturers for turbine component repair services; (9) the impact on business conditions, and on the aerospace industry in particular, of global terrorism threat; (10) successful replacement of declining demand for repair services for turboprop engine components with component repair services for small turbofan engines utilized in the business and regional aircraft markets; (11) continued reliance on several major customers for revenues; (12) the Company’s ability to continue to have access to its revolving credit facility, including the Company’s ability to (i) continue to comply with the terms of its credit agreements, including financial covenants, (ii) continue to enter into amendments to its credit agreement containing financial covenants, which it and its bank lender find mutually acceptable, or (iii) continue to obtain waivers from its bank lender with respect to its compliance with the covenants contained in its credit agreement; (13) the impact of changes in defined benefit pension plan actuarial assumptions on future contributions; and (14) stable governments, business conditions, laws, regulations and taxes in economies where business is conducted.

SIFCO Industries, Inc. and its subsidiaries engage in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include forging, heat-treating, coating, welding, machining and selective electrochemical metal finishing. The products include forgings, machined forged parts and other machined metal parts, remanufactured component parts for turbine engines, and selective electrochemical metal finishing solutions and equipment.

8

A. Results of Operations

Six Months Ended March 31, 2005 Compared with Six Months Ended March 31, 2004

Net sales in the first six months of fiscal 2005 decreased 10.8% to $38.9 million, compared with $43.6 million in the comparable period in fiscal 2004. Net income in the first six months of fiscal 2005 was $1.0 million, compared with a net loss of $1.2 million in the comparable period in fiscal 2004.

Turbine Component Services and Repair Group (“Repair Group”)

Net sales in the first six months of fiscal 2005 decreased 22.2% to $18.7 million, compared with $24.0 million in the comparable fiscal 2004 period. Component manufacturing and repair net sales decreased $3.3 million to $15.6 million in the first six months of fiscal 2005, compared with $19.0 million in the comparable fiscal 2004 period. Demand for precision component machining and for component repairs for large aerospace turbine engines decreased, while the demand for component repairs for industrial turbine engines and small aerospace turbine engines increased in the first six months of fiscal 2005, compared with the comparable fiscal 2004 period. The decrease in demand for component repairs for large aerospace turbine engines impacted virtually all models of such engines. Net sales associated with the demand for replacement parts, which often complement component repair services provided to customers, decreased $2.0 million to $3.1 in the first six months of fiscal 2005, compared with $5.1 million in the comparable fiscal 2004 period.

During the first six months of fiscal 2005, the Repair Group’s selling, general and administrative expenses decreased $0.3 million to $2.2 million, or 11.6% of net sales, from $2.5 million, or 10.3% of net sales, in the comparable fiscal 2004 period. Included in the $2.2 million of selling, general and administrative expenses in the first six months of fiscal 2005 were $0.2 million related to severance charges. The remaining selling, general and administrative expenses in the first six months of fiscal 2005 were $2.0 million, or 10.6% of net sales.

The Repair Group’s operating loss in the first six months of fiscal 2005 increased $1.4 million to $2.6 million from $1.1 million in the comparable fiscal 2004 period. Operating results decreased in the first six months of fiscal 2005 principally due to the negative impact on margins of decreased sales volumes for component manufacturing and repair services, which was partially offset by stronger margins on sales of replacement parts. The stronger margins on sales of replacement parts was attributable to both improved market prices for such components as well as certain replacement part sales consisting of inventory that had been previously written down.

During fiscal 2004, the euro strengthened against the U.S. dollar. The euro continued to be strong in relation to the U.S. dollar during the first six months of fiscal 2005. The Repair Group’s non-U.S. operation has most of its sales denominated in U.S. dollars while a significant portion of its operating costs are denominated in euros. Therefore, as the euro strengthens, costs denominated in euros are negatively impacted. During the first six months of fiscal 2005, the Repair Group hedged most of its exposure to the euro thereby mitigating the negative impact on its operating results in that period. If it had not hedged such exposure, the impact on the Repair Group’s operating results in the first six months of fiscal 2005 would have been higher operating costs of approximately $0.9 million related to its non-U.S. operations, when compared to the comparable fiscal 2004 period.

The Repair Group’s backlog as of March 31, 2005, was $4.6 million, compared with $4.4 million as of September 30, 2004. At March 31, 2005, $3.9 million of the total backlog is scheduled for delivery over the next twelve months and $0.7 million was on hold. All orders are subject to modification or cancellation by the customer with limited charges. The Repair Group believes that the backlog may not be indicative of actual sales for any succeeding period.

Aerospace Component Manufacturing Group (“ACM Group”)

Net sales in the first six months of fiscal 2005 decreased 1.1% to $14.2 million, compared with $14.3 million in the comparable period of fiscal 2004. For purposes of the following discussion, the ACM Group considers aircraft that can accommodate less than 100 passengers to be small aircraft and those that can accommodate 100 or more passengers to be large aircraft. Net sales of airframe components for small aircraft were $6.7 million in the first six months of both fiscal 2005 and 2004. Net sales of turbine engine components for small aircraft, which consist primarily of net sales of turbine engine components for business and regional jets, as well as military transport and surveillance aircraft, increased $0.1 million to $5.4 million in the first six months of fiscal 2005 compared with $5.3 million in the comparable period in fiscal 2004. Net sales of airframe components for large aircraft were $1.0 million in the first six months of both fiscal 2005 and 2004. Net sales of turbine engine components for large aircraft were $0.5 million in the first six months of both fiscal 2005 and 2004. A decrease in the ACM Group’s net sales volumes during the first six months of fiscal 2005 was offset by an increase in the ACM Group’s selling prices due to increases in raw material prices in the market place, the majority of which was passed through to the ACM Group’s customers.

9

The ACM Group’s airframe and turbine engine component products have both military and commercial applications. Net sales of airframe and turbine engine components that solely have military applications were $6.0 million in the first six months of fiscal 2005, compared with $6.7 million in the comparable period in fiscal 2004.

Selling, general and administrative expenses in the first six months of fiscal 2005 were $1.1 million, or 8.0% of net sales, compared with $0.8 million, or 5.9% of net sales, in the first six months of fiscal 2004. The $0.3 million increase in first six months of fiscal 2005 was principally due to an increase in administrative and sales salaries resulting from the full year impact of certain positions that were vacant in the first six months of fiscal 2004 as well as the absence in fiscal 2005 of a bad debt recovery that occurred in the first six months of fiscal 2004.

The ACM Group’s operating loss in the first six months of fiscal 2005 was $0.8 million, compared with operating income of $1.0 million in the same period in fiscal 2004. Operating results were negatively impacted in the first six months of fiscal 2005, compared with the same period in fiscal 2004, due to the negative impact on margins resulting from lower sales volumes as well as by (i) an increase in raw material prices partially offset by scrap material sales; (ii) an increase in energy costs; (iii) an increase in spending on manufacturing supplies and other related expenses; and (iv) an increase in the LIFO provision due principally to the increased cost of raw material steel being experienced within the ACM Group’s industry.

The ACM Group’s backlog as of March 31, 2005 was $32.1 million, compared with $23.6 million as of September 30, 2004. At March 31, 2005, $26.0 million of the total backlog was scheduled for delivery over the next twelve months and $6.1 million was scheduled for delivery beyond the next twelve months. It is important to note a fundamental shift that has occurred in fiscal 2005 with respect to the ordering pattern of the ACM group’s customers. With raw material lead times now being extended, customers are placing orders further in advance, which is one reason for the increase in the ACM Group’s backlog as of March 31, 2005. All orders are subject to modification or cancellation by the customer with limited charges. The ACM Group believes that the backlog may not be indicative of actual sales for any succeeding period.

Applied Surface Concepts (formerly named Metal Finishing) Group

Net sales of the Applied Surface Concepts Group increased 14.7% to $6.1 million in the first six months of fiscal 2005, compared with net sales of $5.3 million in the first six months of fiscal 2004. In the first six months of fiscal 2005, product net sales, consisting of selective electrochemical finishing equipment and solutions, increased 0.7% to $3.0 million, compared with $2.9 million in the same period in fiscal 2004. In the first six months of fiscal 2005, customized selective electrochemical finishing contract service net sales increased 35.1% to $3.0 million, compared with $2.2 million in the same period in fiscal 2004. In the first six months of fiscal 2005, net sales increased to customers in the oil and gas exploration industry, the power generation industry and the aerospace industry compared with the same period in fiscal 2004. These net sales gains were partially offset in the first six months of fiscal 2005 by net sales decreases to the military, the electronics industry and the pulp and paper industry compared with the same period in fiscal 2004.

Selling, general and administrative expenses in the first six months of fiscal 2005 were $1.9 million, or 31.9% of net sales, compared with $1.6 million, or 30.4% of net sales, in the first six months of fiscal 2004. The increase in selling, general and administrative expenses is principally attributable to a $0.2 million increase in compensation and employee benefit expenses consisting primarily of severance benefits incurred as a result of a reorganization of personnel that occurred in the first six months of fiscal 2005.

The Applied Surface Concepts Group’s operating income was $0.4 million in the first six months of both fiscal 2005 and 2004.

The Applied Surface Concepts Group essentially had no backlog at March 31, 2005.

Corporate Unallocated Expenses

Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other corporate expenses, were $0.9 million in the first six months of both fiscal 2005 and 2004. A $0.3 million decrease in legal and professional expenses was offset by a $0.3 million increase in compensation and employee benefit expenses consisting primarily of severance benefits incurred as a result of a reorganization of personnel.

10

Other/General

Interest expense was $0.3 million in the first six months of fiscal 2005 compared with $0.4 million in the first six months of fiscal 2004. The following table sets forth the weighted average interest rates and weighted average outstanding balances under the Company’s credit agreements in the first six months of fiscal years 2005 and 2004.

	Weighted Average						Weighted Average
	Interest Rate						Outstanding Balance
	Six Months Ended						Six Months Ended
	March 31,						March 31,
Credit Agreement	2005			2004			2005	2004
Industrial development variable rate demand revenue bond		1.8	%		1.2	%	$1.2 million	$3.0 million
Term note		7.7	%		9.5	%	$1.5 million	$5.4 million
Revolving credit agreement		5.4	%		4.5	%	$1.3 million	$2.5 million

Currency exchange loss was $0.1 million in the first six months of both fiscal 2005 and 2004. This loss is the result of the impact of currency exchange rate fluctuations on the Company’s monetary assets and liabilities that are not denominated in U.S. dollars. During the first six months of fiscal 2005, the euro strengthened in relation to the U.S. dollar.

Other income includes a $0.1 million gain on the sale of a building and land that was part of the Repair Group’s Tampa, Florida operation and a $6.2 million gain on the sale of a building and land that was part of the Repair Group’s Irish operations. Both properties were included in assets held for sale at September 30, 2004.

Three Months Ended March 31, 2005 Compared with Three Months Ended March 31, 2004

Net sales in the second quarter of fiscal 2005 decreased 12.9% to $19.8 million, compared with $22.8 million in the comparable period in fiscal 2004. Net loss in the second quarter of fiscal 2005 was $1.4 million, compared with a net loss of $0.7 million in the comparable period in fiscal 2004.

Turbine Component Services and Repair Group (“Repair Group”)

Net sales in the second quarter of fiscal 2005 decreased 19.7% to $9.9 million, compared with $12.3 million in the comparable fiscal 2004 period. Component manufacturing and repair net sales decreased $1.5 million to $8.0 million in the second quarter of fiscal 2005, compared with $9.5 million in the comparable fiscal 2004 period. Demand for precision component machining and for component repairs for large aerospace turbine engines decreased, while the demand for component repairs for industrial turbine engines and small aerospace turbine engines increased in the second quarter of fiscal 2005, compared with the comparable fiscal 2004 period. The decrease in demand for component repairs for large aerospace turbine engines impacted virtually all models of such engines. Net sales associated with the demand for replacement parts, which often complement component repair services provided to customers, decreased $1.0 million to $1.9 in the second quarter of fiscal 2005, compared with $2.8 million in the comparable fiscal 2004 period.

During the second quarter of fiscal 2005, the Repair Group’s selling, general and administrative expenses decreased $0.1 million to $1.0 million, or 10.1% of net sales, from $1.1 million, or 9.3% of net sales, in the comparable fiscal 2004 period. Included in the $1.0 million of selling, general and administrative expenses in the second quarter of fiscal 2005 were $0.1 million related to severance charges. The remaining selling, general and administrative expenses in the second quarter of fiscal 2004 were $0.9 million, or 9.6% of net sales.

The Repair Group’s operating loss was $0.7 million in the second quarters of both fiscal 2005 and 2004. Operating results in the second quarter fiscal 2005 were negatively impacted by lower margins, resulting from decreased sales volumes, for component manufacturing and repair services, which was offset by stronger margins on sales of replacement parts. The stronger margins on sales of replacement parts was attributable to both improved market prices for such components as well as certain replacement part sales consisting of inventory that had been previously written down.

During fiscal 2004, the euro strengthened against the U.S. dollar. The euro continued to be strong in relation to the U.S. dollar during the second quarter of fiscal 2005. The Repair Group’s non-U.S. operation has most of its sales denominated in U.S. dollars while a significant portion of its operating costs are denominated in euros. Therefore, as the euro strengthens, costs denominated in euros are negatively impacted. During the second quarter of fiscal 2005, the Repair Group hedged most

11

of its exposure to the euro thereby mitigating the negative impact on its operating results in that period. If it had not hedged such exposure, the impact on the Repair Group’s operating results in the second quarter of fiscal 2005 would have been higher operating costs of approximately $0.4 million related to its non-U.S. operations, when compared to the comparable fiscal 2004 period.

Aerospace Component Manufacturing Group (“ACM Group”)

Net sales in the second quarter of fiscal 2005 decreased 14.2% to $6.7 million, compared with $7.9 million in the comparable period of fiscal 2004. For purposes of the following discussion, the ACM Group considers aircraft that can accommodate less than 100 passengers to be small aircraft and those that can accommodate 100 or more passengers to be large aircraft. Net sales of airframe components for small aircraft decreased $0.1 million to $3.2 million in the second quarter of fiscal 2005, compared with $3.3 million in the comparable period in fiscal 2004. Net sales of turbine engine components for small aircraft, which consist primarily of net sales of turbine engine components for business and regional jets, as well as military transport and surveillance aircraft, decreased $0.8 million to $2.6 million in the second quarter of fiscal 2005, compared with $3.4 million in the comparable period in fiscal 2004. Net sales of airframe components for large aircraft were $0.5 million in the second quarter of both fiscal 2005 and 2004. Net sales of turbine engine components for large aircraft decreased $0.1 million to $0.2 million in the second quarter of fiscal 2005, compared with $0.3 million in the comparable period in fiscal 2004.

The ACM Group’s airframe and turbine engine component products have both military and commercial applications. Net sales of airframe and turbine engine components that solely have military applications were $2.9 million in the second quarter of fiscal 2005, compared with $3.5 million in the comparable period in fiscal 2004.

Selling, general and administrative expenses in the second quarter of fiscal 2005 were $0.6 million, or 8.9% of net sales, compared with $0.4 million, or 4.5% of net sales, in the second quarter of fiscal 2004. The $0.2 million increase in second quarter of fiscal 2005 was principally due to an increase in administrative and sales salaries resulting from the full quarter impact of certain positions that were vacant in the second quarter of fiscal 2004 as well as the absence in fiscal 2005 of a bad debt recovery that occurred in the second quarter of fiscal 2004.

The ACM Group’s operating loss in the second quarter of fiscal 2005 was $0.6 million, compared with operating income of $0.6 million in the same period in fiscal 2004. Operating results were negatively impacted in the second quarter of fiscal 2005 compared with the same period in fiscal 2004 due to the negative impact on margins resulting from lower sales volumes as well as by (i) an increase in energy costs; (ii) an increase in spending on manufacturing supplies; and (iii) an increase in the LIFO provision due principally to the increased cost of raw material steel being experienced within the ACM Group’s industry.

Applied Surface Concepts (formerly named Metal Finishing) Group

Net sales of the Applied Surface Concepts Group increased 22.0% to $3.2 million in the second quarter of fiscal 2005, compared with net sales of $2.7 million in the second quarter of fiscal 2004. In the second quarter of fiscal 2005, product net sales, consisting of selective electrochemical finishing equipment and solutions, increased 9.0% to $1.7 million, compared with $1.5 million in the same period in fiscal 2004. In the second quarter of fiscal 2005, customized selective electrochemical finishing contract service net sales increased 45.4% to $1.5 million, compared with $1.0 million in the same period in fiscal 2004. In the second quarter of fiscal 2005, net sales increased to customers in the oil and gas exploration industry, the automotive industry and the aerospace industry compared with the same period in fiscal 2004. These net sales gains were partially offset in the second quarter of fiscal 2005 by net sales decreases to the military and the electronics industry, compared with the same period in fiscal 2004.

Selling, general and administrative expenses in the second quarter of fiscal 2005 were $0.9 million, or 28.5% of net sales, compared with $0.8 million, or 29.1% of net sales, in the second quarter of fiscal 2004. The increase in selling, general and administrative expenses is principally attributable to a $0.1 million increase in temporary and professional service expenses.

The Applied Surface Concepts Group’s operating income in the second quarter of fiscal 2005 was $0.4 million, compared with $0.2 million in the same period in fiscal 2004.

Corporate Unallocated Expenses

Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other corporate expenses, were $0.6 million in the second quarter of both fiscal 2005 and 2004. A $0.3 million decrease in legal and professional expenses was offset by a $0.3 million increase in compensation and employee benefit expenses consisting primarily of severance and benefits incurred as a result of a reorganization of personnel.

12

Other/General

Interest expense was nominal in the second quarter of fiscal 2005, compared with $0.2 million in the second quarter of fiscal 2004. The following table sets forth the weighted average interest rates and weighted average outstanding balances under the Company’s credit agreements in the second quarter of fiscal years 2005 and 2004.

	Weighted Average						Weighted Average
	Interest Rate						Outstanding Balance
	Three Months Ended						Three Months Ended
	March 31,						March 31,
Credit Agreement	2005			2004			2005			2004
Industrial development variable rate demand revenue bond		N/A			1.2	%	$	0		$3.0 million
Term note		N/A			9.5	%	$	0		$5.2 million
Revolving credit agreement		5.9	%		4.5	%	$	0.5	million	$2.6 million

Currency exchange gain was $0.2 million in the second quarter of fiscal 2005, compared with a nominal amount in the comparable period in fiscal 2004. This gain is the result of the impact of currency exchange rate fluctuations on the Company’s monetary assets and liabilities that are not denominated in U.S. dollars. During the second quarter of fiscal 2005, the euro weakened in relation to the U.S. dollar.

B. Liquidity and Capital Resources

Cash and cash equivalents decreased to $2.1 million at March 31, 2005 from $5.6 million at September 30, 2004. In October 2004, the American Jobs Creation Act of 2004 (“Act”) was enacted. The Act contains a one-time provision allowing earnings of controlled foreign companies to be repatriated, at a reduced tax rate, during the tax year that includes October 2004 or during the subsequent tax year. The Company received a dividend from its non-U.S. subsidiaries during the first six months of fiscal 2005 in the amount of $13.4 million and the funds were principally used to reduce the Company’s outstanding indebtedness.

The Company’s operating activities consumed cash of $3.7 million in the first six months of fiscal 2005, compared with $1.5 million generated in the first six months of fiscal 2004. The $3.7 million of cash used for operating activities in first six months of fiscal 2005 is primarily due to an operating loss of $3.9 million and an increase in inventories of $2.8 million, partially offset by a $1.8 million decrease in accounts receivable and a $0.9 million increase in accounts payable. The change in these components of working capital was due to factors resulting from normal business conditions of the Company, including (i) sales levels, (ii) collections from customers, (iii) the relative timing of payments to suppliers, and (iv) inventory levels required to support customer demand in general and, in particular, the significant extension of raw material lead times currently experienced by the ACM Group.

Capital expenditures were $1.4 million in the first six months of fiscal 2005, compared with $1.3 million in the first six months of fiscal 2004. Fiscal 2005 capital expenditures consist of $0.5 million by the ACM Group, $0.3 million by the Applied Surface Concepts Group and $0.6 million by the Repair Group. Capital expenditures in the first six months of fiscal 2005 consisted primarily of equipment to expand and diversify both the ACM Group’s manufacturing and machining capabilities and the Repair Group’s repair capabilities. The Company anticipates that total fiscal 2005 capital expenditures will approximate $3.0 million.

During the first quarter of fiscal 2005, the Company paid off the remaining $2.7 million outstanding balance of its 15-year industrial development variable rate demand revenue bond, which was issued to expand the Repair Group’s Tampa, Florida facility that was sold during the first quarter of fiscal 2005 and was included in assets held for sale at September 30, 2004.

During the first quarter of fiscal 2005, the Company paid off the remaining $4.5 million outstanding balance of its term note.

At March 31, 2005, the Company has a $6.0 million revolving credit agreement, subject to sufficiency of collateral, that expires on April 1, 2006 and bears interest at the bank’s base rate plus 0.50%. The interest rate was 6.25% at March 31, 2005. A 0.375% commitment fee is incurred on the unused balance of the revolving credit agreement. At March 31, 2005, $1.1 million was outstanding under the revolving credit agreement and the Company had $4.7 million available under its $6.0 million revolving credit agreement. The Company’s revolving credit agreement is secured by substantially all of the

13

Company’s assets located in the U.S., a guarantee by its U.S. subsidiaries and a pledge of 65% of the Company’s ownership interest in its non-U.S. subsidiaries.

Under its credit agreement, the Company is subject to certain customary covenants. These include, without limitation, covenants (as defined) that require maintenance of certain specified financial ratios, including a minimum tangible net worth level and a fixed charge coverage ratio. In February 2005, the Company entered into an agreement with its bank to amend the fixed charge coverage ratio as of December 31, 2004 and for future periods. The Company was in compliance with all applicable covenants at March 31, 2005.

During the first quarter of fiscal 2005, the Company completed the sale of a building and land that was part of its Repair Group’s Irish operations and was included in assets held for sale at September 30, 2004. The net proceeds from the sale of these assets were $8.0 million and the assets that were sold had a net book value of approximately $1.8 million.

The Company believes that cash flows from its operations together with existing cash reserves and the funds available under its revolving credit agreement will be sufficient to meet its working capital requirements through the end of fiscal year 2005. However, no assurances can be given as to the sufficiency of the Company’s working capital to support the Company’s operations. If the existing cash reserves, cash flow from operations and funds available under the revolving credit agreement are insufficient; if working capital requirements are greater than currently estimated; and/or if the Company is unable to satisfy the covenants set forth in its credit agreement, the Company may be required to adopt one or more alternatives, such as reducing or delaying capital expenditures, restructuring indebtedness, selling assets or operations, or issuing additional shares of capital stock in the Company. There can be no assurance that any of these actions could be accomplished, or if so, on terms favorable to the Company, or that they would enable the Company to continue to satisfy its working capital requirements.

C. Recently Issued Accounting Standards

In December 2004, the Financial Accounting Standards Board (“FASB”) issued Statement of Financial Accounting Standards (“SFAS”) No. 123 (revised 2004), “Accounting for Stock-Based Compensation". This Statement supersedes APB Opinion No. 25, “Accounting for Stock Issued to Employees", and its related implementation guidance. This Statement establishes standards for the accounting for transactions in which an entity exchanges its equity instruments for goods or services. It also addresses transactions in which an entity incurs liabilities in exchange for goods or services that are based on the fair value of the entity’s equity instruments or that may be settled by the issuance of those equity instruments. This Statement focuses primarily on accounting for transactions in which an entity obtains employee services in share-based payment transactions. This Statement does not change the accounting guidance for share-based payment transactions with parties other than employees provided in Statement 123 as originally issued and EITF Issue No. 96-18, “Accounting for Equity Instruments That Are Issued to Other Than Employees for Acquiring, or in Conjunction with Selling, Goods or Services". This Statement does not address the accounting for employee share ownership plans, which are subject to AICPA Statement of Position 93-6, “Employers’ Accounting for Employee Stock Ownership Plans". According to the U.S. Securities and Exchange Commission’s Staff Accounting Bulletin No. 107, SFAS No. 123 (revised 2004) is effective for the Company’s fiscal year 2006. The Company does not expect the adoption of this statement in fiscal year 2006 to have a material impact on the Company’s financial position or results of operations.

In December 2004, the FASB issued SFAS No. 153, “Exchanges of Nonmonetary Assets” - an amendment of Accounting Principles Bulletin (“APB”) Opinion No. 29, “Accounting for Nonmonetary Transactions". The guidance in APB Opinion No. 29, is based on the principle that exchanges of nonmonetary assets should be measured based on the fair value of the assets exchanged. The guidance in that Opinion, however, included certain exceptions to that principle. SFAS No. 153, amends Opinion No. 29 to eliminate the exception for nonmonetary exchanges of similar productive assets and replaces it with a general exception for exchanges of nonmonetary assets that do not have commercial substance. A nonmonetary exchange has commercial substance if the future cash flows of the entity are expected to change significantly as a result of the exchange. SFAS No. 153 is effective for fiscal periods beginning after June 15, 2005. The Company does not expect the adoption of this statement in fiscal year 2005 to have a material impact on the Company’s financial position or results of operations.

In November 2004, the FASB issued SFAS No. 151, “Inventory Costs” - an amendment of Accounting Research Bulletin No. 43, Chapter 4, “Inventory Pricing". SFAS No. 151 was issued to clarify the accounting for abnormal amounts of idle facility expense, freight, handling costs, and wasted material (spoilage). Paragraph 5 of ARB 43, Chapter 4, previously stated that “...under some circumstances, items such as idle facility expense, excessive spoilage, double freight, and rehandling costs may be so abnormal as to require treatment as current period charges...” This Statement requires that those items be recognized as current-period charges regardless of whether they meet the criterion of “so abnormal”. In addition, this Statement requires that allocation of fixed production overheads to the costs of conversion be based on the normal capacity of the production facilities. SFAS No. 151 is effective for fiscal years beginning after June 15, 2005. The Company does not

14

expect the adoption of this statement in fiscal year 2006 to have a material impact on the Company’s financial position or results of operations.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

In the ordinary course of business, the Company is subject to foreign currency and interest risk. The risks primarily relate to the sale of the Company’s products and services in transactions denominated in non-U.S. dollar currencies (primarily the euro and British pound); the payment in local currency of wages and other costs related to the Company’s non-U.S. operations (primarily the euro); and changes in interest rates on the Company’s long-term debt obligations. The Company does not hold or issue financial instruments for trading purposes.

The Company believes that inflation has not materially affected its results of operations during the first six months of fiscal 2005, and does not expect inflation to be a significant factor in the balance of fiscal 2005.

A. Foreign Currency Risk

The U.S. dollar is the functional currency for all of the Company’s U.S. operations and its Irish subsidiary. For the Company’s other non-U.S. subsidiaries, the functional currency is the local currency. Assets and liabilities are translated into U.S. dollars at the rate of exchange at the end of the period and revenues and expenses are translated using average rates of exchange. Foreign currency translation adjustments are reported as a component of accumulated other comprehensive loss. Foreign currency transaction gains and losses are included in earnings.

During the first six months of fiscal 2005, the euro continued to be strong in relation to the U.S. dollar. The Repair Group’s non-U.S. operation has a significant portion of its operating costs denominated in euros, and therefore, as the euro strengthens, such costs are negatively impacted. Historically, the Company has been able to mitigate the impact of foreign currency risk by means of hedging such risk through the use of foreign currency exchange contracts. However, such risk is mitigated only for the periods for which the Company has foreign currency exchange contracts in effect, and only to the extent of the U.S. dollar amounts of such contracts. During the first six months of fiscal 2005, the Company hedged most of its exposure to the euro. At March 31, 2005, the Company had forward exchange contracts outstanding for durations of up to six months to purchase euros aggregating U.S. $9.6 million at euro to U.S. dollar exchange rates ranging from 1.1989 to 1.2010. A ten percent appreciation or depreciation of the value of the U.S. dollar relative to the currencies, in which the forward exchange contracts outstanding at March 31, 2005 are denominated, would result in approximately a $1.0 million decline or increase, respectively, in the value of the forward exchange contracts. Factors that could impact the effectiveness of the Company’s hedging efforts include accuracy of expenditure estimates, volatility of currency markets and the cost and availability of hedging instruments. The Company will continue to evaluate its foreign currency risk, if any, and the effectiveness of using similar hedges in the future to mitigate such risk.

At March 31, 2005, the Company’s assets and liabilities denominated in the British pound and the euro were as follows (amounts in thousands):

	British Pound		Euro
Cash and cash equivalents		225		260
Accounts receivable		420		814
Accounts payable and accrued liabilities		162		1,442

B. Interest Rate Risk

The Company’s primary interest rate risk exposure results from the variable interest rate mechanisms associated with the Company’s revolving credit agreement. If interest rates were to increase 100 basis points (1%) from March 31, 2005, and assuming no changes in the amount outstanding under the revolving credit agreement, the additional interest expense to the Company would be nominal.

Item 4. Controls And Procedures

The Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the Chairman and Chief Executive Officer of the Company and Chief Financial Officer of the Company, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures pursuant to Exchange Act Rule 13a-15(e) as of the end of the period covered by this report. Based upon that evaluation, the Chairman and Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures are effective

15

in timely alerting them to material information relating to the Company (including its consolidated subsidiaries) required to be included in the Company’s periodic SEC filings.

There has been no significant change in our internal control over financial reporting that occurred during the period covered by this report that has materially affected, or that is reasonably likely to materially affect our internal control over financial reporting.

Part II. Other Information

Item 1. Legal Proceedings

No change.

Item 2. Change in Securities and Use of Proceeds

No change.

Item 3. Defaults Upon Senior Securities

None.

Item 4. Submission of Matters to a Vote of Security Holders

At the Annual Meeting of Shareholders held on January 25, 2005, there were a total of 4,771,828 shareholders voting either in person or by proxy. The shareholders:

A.	Elected six directors to the Company’s Board of Directors, Jeffrey P. Gotschall, Michael S. Lipscomb, P. Charles Miller, Jr., Alayne L. Reitman, Hudson D. Smith and J. Douglas Whelan, to serve on the Board of Directors until the Company’s Annual Meeting in 2006.
	The results of the voting for directors were as follows:

Name	Votes For		Votes Withheld
Jeffrey P. Gotschall		4,745,077		26,750
Michael S. Lipscomb		4,739,977		31,850
P. Charles Miller, Jr.		4,747,352		24,475
Alayne L. Reitman		4,744,182		27,645
Hudson D. Smith		4,745,113		26,714
J. Douglas Whelan		4,741,098		30,729

B.   Ratified Grant Thornton LLP as the independent auditors of the Company to audit the books and accounts of the Company for the fiscal year ending September 30, 2005. There were 4,731,729 votes cast for the appointment, 3,691 votes cast against the appointment and 36,408 abstentions.

Item 5. Other Information

None.

Item 6. Exhibits

(a) Exhibits

The following exhibits are filed with this report or are incorporated herby reference to a prior filing in accordance with Rule 12b-32 under the Securities and Exchange Act of 1934 (Asterisk denotes exhibits filed with this report.).

Exhibit No.	Description
3.1	Third Amended Articles of Incorporation of SIFCO Industries, Inc., filed as Exhibit 3(a) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference

16

3.2	SIFCO Industries, Inc. Amended and Restated Code of Regulations dated January 29, 2002, filed as Exhibit 3(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
4.2	Amended and Restated Credit Agreement Between SIFCO Industries, Inc. and National City Bank dated April 30, 2002, filed as Exhibit 4(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
4.5	Consolidated Amendment No. 1 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated November 26, 2002 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.5 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
4.6	Consolidated Amendment No. 2 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated February 13, 2003 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.6 of the Company’s Form 10-Q dated December 31, 2002, and incorporated herein by reference
4.7	Consolidated Amendment No. 3 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated May 13, 2003 between SIFCO Industries Inc. and National City Bank, filed as Exhibit 4.7 of the Company’s Form 10-Q dated March 31, 2003, and incorporated herein by reference
4.8	Consolidated Amendment No. 4 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated July 28, 2003 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.8 of the Company’s Form 10-Q dated June 30, 2003, and incorporated herein by reference
4.9	Consolidated Amendment No. 5 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated November 26, 2003 between SIFCO Industries, Inc. and National City Bank
4.10	Amendment No. 6 to Amended and Restated Credit Agreement dated March 31, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.10 of the Company’s Form 10-Q dated March 31, 2004, and incorporated herein by reference
4.11	Consolidated Amendment No. 7 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated May 14, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.11 of the Company’s Form 10-Q dated March 31, 2004, and incorporated herein by reference
4.12	Consolidated Amendment No. 8 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note effective June 30, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.12 of the Company’s Form 10-Q dated June 30, 2004, and incorporated herein by reference
4.13	Consolidated Amendment No. 9 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note effective November 12, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.13 to the Company’s Form 10-K dated December 17, 2004 and incorporated herein by reference
4.14	Amendment No. 10 to Amended and Restated Credit Agreement effective December 31, 2004 between SIFCO Industries, Inc. and National City Bank
9.1	Voting Trust Extension Agreement dated January 14, 2002, filed as Exhibit 9.1 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
9.2	Voting Trust Agreement dated January 15, 1997, filed as Exhibit 9.2 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
10.1	1989 Key Employee Stock Option Plan, filed as Exhibit B of the Company’s Form S-8 dated January 9, 1990, and incorporated herein by reference

17

10.2	Deferred Compensation Program for Directors and Executive Officers (as amended and restated April 26, 1984), filed as Exhibit 10(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
10.3	SIFCO Industries, Inc. 1998 Long-term Incentive Plan, filed as Exhibit 10.3 of the Company’s form 10-Q dated June 30, 2004, and incorporated herein by reference
10.4	SIFCO Industries, Inc. 1995 Stock Option Plan, filed as Exhibit 10(d) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
10.5	Change in Control Severance Agreement between the Company and Frank Cappello, dated September 28, 2000, filed as Exhibit 10(g) of the Company’s Form 10-Q dated December 31, 2000, and incorporated herein by reference
10.6	Change in Control Severance Agreement between the Company and Hudson Smith, dated September 28, 2000, filed as Exhibit 10 (h) of the Company’s Form 10-Q dated December 31, 2000, and incorporated herein by reference
10.7	Change in Control Severance Agreement between the Company and Remigijus Belzinskas, dated September 28, 2000, filed as Exhibit 10 (i) of the Company’s Form 10-Q dated December 31, 2000, and incorporated herein by reference
10.8	Change in Control Agreement between the Company and Frank Cappello, dated November 9, 2000, filed as Exhibit 10 (j) of the Company’s Form 10-Q dated December 31, 2000, and incorporated herein by reference
10.9	Change in Control Severance Agreement between the Company and Timothy V. Crean, dated July 30, 2002, filed as Exhibit 10.9 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
10.10	Change in Control Severance Agreement between the Company and Jeffrey P. Gotschall, dated July 30, 2002, filed as Exhibit 10.10 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
10.11	Form of Restricted Stock Agreement, filed as Exhibit 10.11 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
10.12	Form of Tender, Condition of Tender, Condition of Sale and General Conditions of Sale dated June 30, 2004, filed as Exhibit 10.12 of the Company’s Form 8-K dated October 14, 2004, and incorporated herein by reference
10.13	Separation Agreement and Release between Hudson D. Smith and SIFCO Industries, Inc., effective January 31, 2005, filed as Exhibit 10.13 of the Company’s Form 8-K dated February 8, 2005, and incorporated herein by reference
*31.1	Certification of Chief Executive Officer pursuant to Rule 13a-14(a) / 15d-14(a)
*31.2	Certification of Chief Financial Officer pursuant to Rule 13a-14(a) / 15d-14(a)
*32.1	Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350
*32.2	Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350

18

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereto duly authorized.

	SIFCO Industries, Inc.
	(Registrant)
Date: May 11, 2005	/s/	Jeffrey P. Gotschall
		Jeffrey P. Gotschall
		Chairman of the Board and
		Chief Executive Officer
Date: May 11, 2005	/s/	Frank A. Cappello
		Frank A. Cappello
		Vice President-Finance and
		Chief Financial Officer
		(Principal Financial Officer)

19

EX-31.1

Exhibit 31.1

CERTIFICATION PURSUANT TO
RULE 13A-14(A) / 15D-14(A)

I, Jeffrey P. Gotschall, certify that:

1.	I have read this Quarterly Report on Form 10-Q of SIFCO Industries, Inc.
2.	Based on my knowledge, this quarterly report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this quarterly report;
3.	Based on my knowledge, the financial statements, and other financial information included in this quarterly report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this quarterly report;
4.	The registrant’s other certifying officers and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) for the registrant and have:

a.	designed such disclosure controls and procedures, or caused such internal controls and procedures to be designated under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this quarterly report is being prepared; and
b.	paragraph omitted pursuant to SEC Release Nos. 33-8238 and 34-47986; and
c.	evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures as of the end of the period covered by this report based on such evaluation; and
d.	disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.   The registrant’s other certifying officers and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s board of directors (or persons performing the equivalent functions):

a.	all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b.	any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: May 11, 2005	/s/	Jeffrey P. Gotschall
		Jeffrey P. Gotschall
		Chairman of the Board and
		Chief Executive Officer

1

EX-31.2

Exhibit 31.2

CERTIFICATION PURSUANT TO
RULE 13A-14(A) / 15D-14(A)

I, Frank A. Cappello, certify that:

1.	I have read this Quarterly Report on Form 10-Q of SIFCO Industries, Inc.
2.	Based on my knowledge, this quarterly report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this quarterly report;
3.	Based on my knowledge, the financial statements, and other financial information included in this quarterly report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this quarterly report;
4.	The registrant’s other certifying officers and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) for the registrant and have:

a.	designed such disclosure controls and procedures, or caused such internal controls and procedures to be designated under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this quarterly report is being prepared; and
b.	paragraph omitted pursuant to SEC Release Nos. 33-8238 and 34-47986; and
c.	evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures as of the end of the period covered by this report based on such evaluation; and
d.	disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.   The registrant’s other certifying officers and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s board of directors (or persons performing the equivalent functions):

a.	all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b.	any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: May 11, 2005	/s/	Frank A. Cappello
		Frank A. Cappello
		Vice President – Finance and
		Chief Financial Officer

1

EX-32.1

Exhibit 32.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO
18 U.S.C. SECTION 1350

In connection with the Quarterly Report of SIFCO Industries, Inc. (“Company”) on Form 10-Q for the quarter ended March 31, 2005 as filed with the Securities and Exchange Commission on the date hereof (“Report”), I, Jeffrey P. Gotschall, Chairman of the Board and Chief Executive Officer of the Company, certify pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

(1)   The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(2)   The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

/s/	Jeffrey P. Gotschall
	Jeffrey P. Gotschall
	Chairman of the Board and
	Chief Executive Officer
	May 11, 2005

This certification accompanies this Report on Form 10-Q pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 and shall not, except to the extent required by such Act, be deemed filed by SIFCO Industries, Inc. for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Such certification will not be deemed to be incorporated by reference into any filing under the Securities Act of 1933, as amended, or the Exchange Act, except to the extent that SIFCO Industries, Inc. specifically incorporates it by reference.

A signed original of this written statement required by Section 906 has been provided to SIFCO Industries, Inc. and will be retained by SIFCO Industries, Inc. and furnished to the Securities and Exchange Commission or its staff upon request.

1

EX-32.2

Exhibit 32.2

CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO
18 U.S.C. SECTION 1350

In connection with the Quarterly Report of SIFCO Industries, Inc. (“Company”) on Form 10-Q for the quarter ended March 31, 2005 as filed with the Securities and Exchange Commission on the date hereof (“Report”), I, Frank A. Cappello, Vice President – Finance and Chief Financial Officer of the Company, certify pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

(1)   The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(2)   The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

/s/	Frank A. Cappello
	Frank A. Cappello
	Vice President – Finance and
	Chief Financial Officer
	May 11, 2005

This certification accompanies this Report on Form 10-Q pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 and shall not, except to the extent required by such Act, be deemed filed by SIFCO Industries, Inc. for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Such certification will not be deemed to be incorporated by reference into any filing under the Securities Act of 1933, as amended, or the Exchange Act, except to the extent that SIFCO Industries, Inc. specifically incorporates it by reference.

A signed original of this written statement required by Section 906 has been provided to SIFCO Industries, Inc. and will be retained by SIFCO Industries, Inc. and furnished to the Securities and Exchange Commission or its staff upon request.

1