-----BEGIN PRIVACY-ENHANCED MESSAGE----- Proc-Type: 2001,MIC-CLEAR Originator-Name: webmaster@www.sec.gov Originator-Key-Asymmetric: MFgwCgYEVQgBAQICAf8DSgAwRwJAW2sNKK9AVtBzYZmr6aGjlWyK3XmZv3dTINen TWSM7vrzLADbmYQaionwg5sDW3P6oaM5D3tdezXMm7z1T+B+twIDAQAB MIC-Info: RSA-MD5,RSA, E2z04jj9OtCLk2ReMOWD/j1ZmTLExlZW+2mUwPmJmlQihutBplqqTTmXGRJ3RuVN n7ob14PQW+DI022cuoYEwA== /in/edgar/work/0000950152-00-006950/0000950152-00-006950.txt : 20000929 0000950152-00-006950.hdr.sgml : 20000929 ACCESSION NUMBER: 0000950152-00-006950 CONFORMED SUBMISSION TYPE: 10-K405 PUBLIC DOCUMENT COUNT: 2 CONFORMED PERIOD OF REPORT: 20000630 FILED AS OF DATE: 20000927 FILER: COMPANY DATA: COMPANY CONFORMED NAME: GLASSTECH INC CENTRAL INDEX KEY: 0000857565 STANDARD INDUSTRIAL CLASSIFICATION: [3220 ] IRS NUMBER: 133440225 STATE OF INCORPORATION: DE FISCAL YEAR END: 0630 FILING VALUES: FORM TYPE: 10-K405 SEC ACT: SEC FILE NUMBER: 033-32185-01 FILM NUMBER: 729224 BUSINESS ADDRESS: STREET 1: AMPOINT INDUSTRIAL PARK STREET 2: 995 FOURTH STREET CITY: PERRYSBURG STATE: OH ZIP: 43551 BUSINESS PHONE: 4196619500 MAIL ADDRESS: STREET 1: AMPOINT INDUSTRIAL PARK STREET 2: 995 FOURTH STREET CITY: OERRYBURG STATE: OH ZIP: 43551 10-K405 1 l84085ae10-k405.txt GLASSTECH, INC. 10-K405 1 UNITED STATES SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-K (Mark one) [X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended June 30, 2000 OR [ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 GLASSTECH, INC. (Exact name of registrant as specified in its charter) DELAWARE 33-32185-01 13-3440225 - -------- ----------- ---------- (State or other jurisdiction of (Commission (IRS Employer incorporation or organization) file number) Identification No.) Ampoint Industrial Park, 995 Fourth Street, Perrysburg, Ohio 43551 (Address of principal executive offices) (Zip Code) Registrant's telephone number, including area code: (419) 661-9500 Securities registered pursuant to Section 12(d) of the Act: None Securities registered pursuant to Section 12(g) of the Act: None Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [X] No [ ] Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X] The aggregate market value of the common stock of Glasstech, Inc. held by non-affiliates of Glasstech, Inc. is not applicable as the common stock of Glasstech, Inc. is privately held. The number of shares of common stock, $.01 par value, outstanding as of September 15, 2000 was 1,000. DOCUMENTS INCORPORATED BY REFERENCE NONE 2 FORWARD-LOOKING STATEMENTS Certain statements in this Annual Report on Form 10-K (this "Form 10-K") including those contained in the Management's Discussion and Analysis of Financial Condition and Results of Operations ("MD&A") section and the attached financial statements, in the Company's press releases and in oral statements made by or with the approval of an authorized executive officer of the Company constitute "forward-looking statements" as that term is defined under the Private Securities Litigation Reform Act of 1995. These may include statements projecting, forecasting or estimating Company performance and industry trends. The achievement of the projections, forecasts or estimates is subject to certain risks and uncertainties. Actual results and events may differ materially from those projected, forecasted or estimated. The applicable risks and uncertainties include general economic and industry conditions that affect all international businesses, as well as matters that are specific to the Company and the markets it serves. General risks that may impact the achievement of such forecasts include compliance with new laws and regulations; significant raw material price fluctuations; currency exchange rate fluctuations; business cycles; and political uncertainties. Specific risks to the Company include risk of recession in the international markets and industries in which its products are sold; the concentration of a significant portion of the Company's revenues from customers whose equipment needs are located in the Asia-Pacific region; the concentration of a substantial percentage of the Company's sales with a few major customers, several of whom have significant manufacturing presence in the Asia-Pacific region; timing of new system orders and the timing of payments due on such orders; changes in installation schedules, which could lead to deferral of progress payments or unanticipated production costs; new or emerging technologies from current competitors, customers' in-house engineering departments and others; competition from current competitors, customers' in-house engineering departments and others; and the emergence of a substitute for glass. In light of these and other uncertainties, the inclusion of a forward-looking statement herein should not be regarded as a representation by the Company that the Company's plans and objectives will be achieved. PART I. ITEM 1. BUSINESS. OVERVIEW The Company designs and assembles glass bending and tempering (i.e., strengthening) systems used by glass manufacturers and processors in the conversion of flat glass into safety glass. The Company sells its systems worldwide, primarily to automotive glass manufacturers and processors (the "Automotive Market") and also to architectural glass manufactures and processors (the "Architectural Market"). The Company's systems are designed to meet customers' safety glass production requirements for complexity, accuracy and optical quality while simultaneously enhancing system productivity, flexibility and cost efficiency. For the Automotive Market, the Company has developed bending and tempering systems that meet automobile manufacturers' safety glass specifications for current and future production models. For the Architectural Market, the Company's energy-efficient processing systems are capable of producing high-quality bent or flat glass at output rates tailored to meet customer-specific production requirements. As a result of the long useful life and growing worldwide installed base of its systems, the Company is able to complement its sale of complete systems ("Original Equipment") with the sale of aftermarket products and services consisting of retrofits, tooling (i.e., molds used to shape automotive glass) and replacement parts (the "Aftermarket"). The Company's products feature proprietary technologies that have been developed over the last 25 years and are protected by approximately 700 patents and patent application filings worldwide. 2 3 For fiscal year ended June 30, 2000, the Company generated net revenue and EBITDA (as defined in Footnote (b) under the heading "Selected Financial Data") of $47.0 million and $7.7 million, respectively. Original Equipment revenue totaled $27.2 million, or 57.8%, of the Company's total revenue for the same period. The balance of the Company's revenue was generated through Aftermarket sales including retrofits, tooling and replacement part sales intended to maintain or enhance the Company's installed base of systems. A Glasstech system performs a series of processes that bend and strengthen flat glass in the production of safety glass products such as car windows. In each system, flat glass supplied by glass manufacturers is conveyed horizontally on ceramic rollers through a high temperature furnace, a bending module and a quench module (which completes the tempering process by rapidly cooling the heated glass). Microprocessor-based controls regulate temperature, speed and glass location throughout the entire process. In addition, the Company develops its own proprietary software to control the integrated system. The modular design of a Glasstech system readily enables the Company to offer customized systems that meet specific technical requirements of its customers. Such a design also creates equipment retrofit and upgrade opportunities for the Company. The Company works closely with its customers as they identify capacity and functionality requirements for a new system and then throughout the usual 10 to 12 month order, installation and acceptance cycle to ensure satisfaction with their completed system. Systems designed for the Automotive Market are used to form and temper glass for automotive back, side and roof windows, as well as to form and anneal glass used for windshields. Systems designed for the Architectural Market process curved and flat tempered glass which are used for skylights, insulating glass, patio doors, furniture and appliances. The Company has an installed base of approximately 400 systems located in over 45 countries on six continents. BACKGROUND The Company was founded in 1971 to manufacture flat glass tempering systems for the Architectural Market. Building on its success in that market, in 1977 the Company delivered its first bending and tempering system used to produce simple glass shapes for the Automotive Market. Through continued product development programs and technological enhancements, the Company manufactured its first bending and tempering system for complex glass shapes for the Automotive Market in 1985. This system enables the Company's customers to bend and form glass while it is still inside the furnace, which results in enhanced quality, higher yields (i.e., reduced breakage and fewer defects) and more precision in the final shape of the safety glass product. In 1988, and again in 1989, the Company was purchased in separate leveraged buyout transactions. In December 1992, the Company reorganized its senior management. In May 1993, the Company filed for protection under Chapter 11 of the Federal Bankruptcy Code due to an inability to service indebtedness incurred in the 1989 leveraged buyout transaction. While under the protection of Chapter 11, the new management team refocused its business strategy by, among other things, focusing on the sale of a more profitable product mix and on the containment of costs. As a result of these efforts, a reorganization of its senior management and a reorganization of the Company's debt under a bankruptcy plan of reorganization, the Company emerged from Chapter 11 in January 1995. Upon consummation of the Reorganization, the Company's debt holders converted their debt obligations into 100% of the Company's equity, $42.0 million of 10% Senior Notes and the right to receive certain cash payments. In 1997, Glasstech Holding Co ("Holding") and Glasstech Sub Co. ("Sub Co.") were formed to effect the acquisition of the Company by Key Equity Capital Corporation ("KECC"), certain of KECC's affiliates and certain members of management of the Company (collectively, the "Key Equity Group"). The acquisition was consummated on July 2, 1997 pursuant to an Agreement and Plan of Merger, dated as of June 5, 1997, among Holding, Sub Co. and the Company, as amended (the "Merger Agreement"). Under the terms of the Merger Agreement, Sub Co. was merged into the Company, and the Company continued as the surviving corporation (the "Merger"). The aggregate consideration for the Merger was $77.9 million (the "Purchase 3 4 Price"). To finance and complete the Merger (including the payment of related fees and expenses): (i) the Key Equity Group purchased, for $15.0 million, all of the outstanding shares of capital stock of Holding; (ii) Holding purchased, for $15.0 million, all of the outstanding shares of capital stock of Sub Co. (the "Equity Contribution"); (iii) Sub Co. sold 12 3/4% Senior Notes Due 2004 (the "Old Notes") in an aggregate principal amount of $70.0 million and the Company issued 70,000 Warrants (received from Holding) to purchase an aggregate of 877.21 shares of Class A Common Stock of Holding ("Initial Offering"); and (iv) upon completion of the Merger, the Company, as the surviving entity, became the obligor on the Old Notes. The Company also entered into a new revolving credit facility (the "Credit Facility"), which is secured by substantially all of the assets of the Company and, subject to certain borrowing base limitations, provides for borrowings up to $10.0 million (See Item 7 "Management's Discussion and Analysis of Financial Condition and Results of Operations - Liquidity and Capital Resources" for current discussion of the Credit Facility). The foregoing transactions are collectively referred to herein as the "Transactions". Holding has no significant activities other than its investment in the Company. In December 1997, the Company completed an exchange offer under which holders of the Old Notes were offered the opportunity to exchange their Old Notes for the Company's Series B 12 3/4% Senior Notes Due 2004 (the "Senior Notes") that were identical to the Old Notes, except that the Senior Notes were issued in a transaction registered under the Securities Act of 1933, as amended, and are not subject to certain restrictions on transfer contained in the Old Notes and do not provide for any registration rights. Prior to the consummation of the Merger, the Company redeemed its existing indebtedness at a premium, paid certain Transaction-related expenses and remitted any remaining unrestricted cash in excess of $2.0 million to its stockholders. Also, prior to the consummation of the Merger all existing stock options and common stock warrants of the Company were deemed exercised and exchanged for their pro rata share of the Purchase Price. As a result of the Transaction, the financial position and results of operations of the Company subsequent to the Transaction (the "Successor Company") are not necessarily comparable to the financial position and results of operations of the Company prior to the Transaction (the "Predecessor Company"). Amounts reported for financial reporting purposes in fiscal 1998 represent the activity of the Successor Company beginning July 2, 1997. THE MARKET FOR SAFETY GLASS PRODUCTS In the United States, automobile manufacturers purchase their safety glass products from independent glass manufacturers and processors, except for DaimlerChrysler Corporation, which produces a portion of its safety glass requirements in-house. In Europe and Asia-Pacific, the majority of automobile glass manufacturers purchase safety glass products from independent manufacturers and processors. The Company believes that most of the major glass manufacturers and processors are customers of the Company. Automotive safety glass products are formed into either simple or complex shapes. Simple glass, which is relatively flat and has little curvature, is required to conform to exacting physical dimensions and fracture requirements. Significant bending technology is not required to process this type of glass. Unlike simple glass, complex glass has a high degree of curvature, or "bulge." The more curvature that a piece of glass has, the more likely it is to develop optical distortions unless it is produced to precise specifications. For this reason, it is important that the bending of complex glass be done in a manner that produces consistent, repeatable results subject to minimal process variation. In the Automotive Market, the majority of side, back and roof windows consist of a single piece of tempered glass. The majority of windshields are of laminated construction, which requires the insertion of a plastic layer between two pieces of annealed glass. 4 5 In the Architectural Market, the most common architectural glazing product worldwide is flat tempered glass. Such glass is used for building windows, patio doors, shower enclosures, display cases, furniture glass and appliance glass. The Company believes that a future trend in the Automotive Market will be that of increasing use of additional laminated glass for sidelites and backlites. If this trend materializes, it will mean the use of more glass in cars since laminated glass requires the use of two pieces of glass where one is now used for each sidelite and backlite. If this trend develops, it may increase the need for the Company's equipment. THE SAFETY GLASS PRODUCTION PROCESS The Company's systems process flat glass produced by glass manufacturers into safety glass. The Company designs and assembles Original Equipment systems that bend and temper flat glass for automotive, industrial and architectural applications. The Company also designs and assembles systems that anneal (rather than temper) glass for use in the production of laminated glass for products such as automotive windshields. The basic fabrication process involves placing a piece of glass horizontally on a conveyor of ceramic rollers that transfers the glass through a furnace where it is heated to the desired temperature. If the glass then requires bending, it generally will be bent into either a simple or complex shape. The glass is then moved into the quench where, depending upon the desired end product, it is either tempered or annealed. Heating Process. Traditionally, all Glasstech systems heated glass with electric radiant heat ("ERH"). As an alternative, the Company introduced gas-fired forced convection heat ("FCH") which was developed in conjunction with the Gas Research Institute ("GRI"). FCH is currently available for sale in the Automotive and Architectural Markets and offers customers significant advantages over ERH technology. For example, FCH can be more cost-effective than ERH, because gas often is less expensive than electricity. In addition, FCH can heat glass with special coatings faster and more uniformly than ERH, resulting in lower production costs, faster outputs and higher quality glass. In spite of FCH's significant advantages, not all product applications justify the additional capital expense of an FCH furnace. Accordingly, the Company expects to continue to offer systems with ERH. Bending Process. Glasstech systems generally bend glass into simple and complex shapes through one of three techniques. The gravity-sag technique creates simple shapes by placing a piece of glass on a ring, heating it to its softening point and allowing the shape to form via gravity. The deep bending technique creates complex shapes by placing the glass on a ring mold, heating it and pressing the heated glass against a full surface area mold. The cylindrical bending technique creates simple shapes with a single curve by placing the glass on rollers, heating it and using a set of flexible rollers to curve the glass. Tempering Process. Tempering is the process of strengthening heated glass by cooling it rapidly. Tempered glass is up to five times stronger than untempered glass and, if broken, fractures into small pieces, reducing the risk of injury. Conversely, untempered glass will splinter and produce sharp edges. The process the Company uses to temper safety glass is called "quenching" which involves moving the heated glass into the quench where, through a computer-controlled process, it is cooled with air directed on the surfaces of the glass by an array of nozzles that diffuse air from a large blower or fan. Glass tempered by a Glasstech system meets international fracture standards. Annealing Process. The annealing process is a preparatory step in the process of producing laminated glass, which is used to form most vehicle windshields. The annealing process is similar to the tempering process, except that instead of cooling the glass rapidly, it is cooled much more slowly. Annealed glass breaks more easily upon impact and, unlike tempered glass, splinters when broken. To complete the lamination process, glass processors and fabricators layer two pieces of annealed glass, which can be 5 6 produced by one of the Company's Original Equipment systems, around a piece of plastic such that the annealed glass adheres to the plastic when broken. A laminated glass product breaks relatively easily into a spider web-like pattern without permitting the object creating the impact to break through the glass, and any glass particles remain adhered to the plastic layer, thereby reducing the risk of injury to the vehicle's or building's occupants. PRODUCTS Original Equipment-Automotive. Systems designed and assembled for the Automotive Market process flat glass by bending and tempering it to produce automotive side, back and roof windows and by bending and annealing flat glass in the production of laminated glass for windshields. The Company sells four basic systems, which are primarily differentiated by their bending techniques, to automotive glass manufacturers and processors. - Quick-Sag System. Introduced in the late 1970s, the Company's quick-sag system (the "Quick-Sag System") bends and tempers glass for side, back and roof automotive windows. Using the gravity-sag technique, the Quick-Sag System produces high optical-quality glass in simple shapes. Although this is the Company's oldest system, the Quick-Sag System continues to have applications in markets such as China, South America and other developing markets. Such a system may be retrofitted to provide higher output deep bending or cylindrical bending capabilities if required by the Company's customers. - Deep Bending System. The Company's deep bending system (the "Deep Bending System") was first introduced in 1985 in response to customers' demands for more complex safety glass shapes that could not be produced by the gravity-sag technique used in the Quick-Sag System. By using the deep-bending technique, such systems shape glass with enhanced optical quality to precise tolerances with deep and complex bends for automotive side and back windows. To form different shapes of complex safety glass, the Deep Bending System requires different sets of tooling, which the Company offers as part of its aftermarket business. - Cylindrical Bending System. Introduced in fiscal 1994 to produce accurate, simple cylindrical bends using flexible rollers (rather than tooling), the cylindrical bending system (the "Cylindrical Bending System") produces side and roof vehicle windows that require a simple cylindrical bend. Prior to the introduction of this system, it generally was not cost-effective for the Company to offer a system that produced glass with a simple cylindrical bend because the Company was unable to compete favorably against equipment designed in-house by the Company's customers. With the introduction of the Cylindrical Bending System, however, the Company now offers customers the ability to make faster changeovers by eliminating the tooling requirements typical of its other bending systems. This feature reduces the customers' production costs and maximizes their system performance. - In-line System. Unlike the movement of glass in a Quick-Sag System or a Deep Bending System, in which glass exits from the side of the bending module, the glass in an in-line system (the "In-line System") travels in a straight line throughout the entire process. An In-line System is capable of producing higher quality glass at faster output rates and at lower costs per piece of glass than a side-exit system. The first generation of the In-Line System was introduced in 1985. A second generation In-Line System was placed into operation in 1995 for the production of windshield glass. The current generation In-Line System was placed into operation in 1999 and is capable of producing complex-shaped glass for both automotive windshields and back windows. Original Equipment-Architectural. Systems designed and assembled for the Architectural Market 6 7 process flat glass by tempering or by bending and tempering it for applications including residential and commercial construction, furniture, display cases, shower enclosures and appliances. - Flat Glass Tempering Systems. The Company's initial generation of flat glass tempering for architectural applications was introduced in 1971. Current systems can be equipped with either ERH or FCH heating technology. A system with FCH is more expensive initially than one with ERH, but offers significant energy cost savings and output advantages, particularly for reflective or low-emissivity glass. - Bending and Tempering Systems. Initially introduced in 1990 in response to the demand for curved glass from the Architectural Market, these systems are designed to shape glass of varying thicknesses into custom-specified curves. Original Equipment-Other. In 1992, the Company formed Stir-Melter, Inc. ("Stir-Melter"), a wholly owned subsidiary that designs and assembles a glass-melting system that vitrifies (i.e., changes into a glass-like substance by fusion due to heat) hazardous waste for safe disposal. Stir-Melter's systems are rapid glass melters that employ aggressive mechanical stirring action in combination with direct electrical heating. Stir Melter's activities have not been significant to the Company's operations. Aftermarket Business. Aftermarket products and services complement the Company's Original Equipment business. Sales in this area consist of the following items: (i) retrofits (extensions or improvements of current systems); (ii) tooling (complete sets of bending and tempering equipment designed to produce specific complex-shaped glass products); (iii) ceramic rollers (used to convey glass through the furnace); (iv) replacement parts for all the individual system components; and (v) technical services. - Retrofits. Retrofits are purchased by customers who want to increase production capacity, extend bending capability, increase system efficiency or take advantage of the latest computer and control system developments. Typical retrofits and improvements include: (i) extensions of heater length to increase capacity; (ii) conversions from automotive simple bending systems to complex bending systems, such as from a Quick-Sag System to a Deep Bending System; (iii) quench upgrades; (iv) conversion of a single-function system to a dual-function system, such as adding a Cylindrical Bending System to a Quick-Sag System; and (v) computer or control upgrades. - Tooling. The Company's customers in the Automotive Market operate complex bending and tempering systems that require part-dedicated tooling equipment to produce individual vehicle window parts that meet precise design and shape specifications. The Company's tooling products generally include: (i) bending molds; (ii) bending rings (to press the glass to the mold); (iii) lift jets (to raise the glass from the conveyor to the mold); (iv) quench rings (to transport the glass from the mold to the quench); and (v) quenching heads (which incorporate nozzles and direct air against the glass surface). - Ceramic Rollers. The Company's roller hearth technology was introduced to eliminate the marks left on glass by older vertical systems that tempered flat glass by hanging it from tongs. The ceramic rollers are used to convey the glass horizontally into and through the furnace and are manufactured to strict specifications in order to reduce distortion or markings on the glass surface. - Replacement Parts. Both proprietary and nonproprietary parts are offered to replace components used in Glasstech systems. Customers are encouraged to purchase an initial consignment of replacement parts when purchasing a new system and to maintain critical parts in inventory throughout the life of their system. 7 8 - Technical Services. The Company's technical services department provides it with an important competitive advantage. The customer service staff provides aftermarket technical support and gathers feedback from customers regarding specific product improvement recommendations for Glasstech systems. PRODUCT DEVELOPMENT The Company's Research and Development ("R&D") effort is a significant factor in maintaining its market and technological leadership. The objective of the Company's R&D effort is to develop new products and to improve existing products to meet present and future market demands. The Company works closely with its customers to identify their current and future needs, enabling it to proactively design creative solutions to meet future industry requirements. Development proposals are submitted to the Company's Executive Technical Committee to be analyzed and assessed. Proposals are authorized only when the committee is satisfied that the proposal meets customer or market needs and the proposed program can be conducted cost-effectively with a reasonable probability of achieving the desired level of profitability. The Company has spent approximately $4.2 million, $3.4 million and $3.6 million (exclusive of capital expenditures relating to demonstration glass tempering furnaces) in fiscal years 1998, 1999 and 2000, respectively, on the development of new systems or on the improvement of existing systems. MARKETING AND SALES The Company's sales efforts are conducted by personnel operating in the Americas, Europe (including Africa and the Middle East) and Asia-Pacific. The Company's international sales efforts are supplemented by nonexclusive sales agents retained on a commission basis. Commissions are paid only when sales are confirmed and payments have been received from the customer. Glasstech Ltd., a wholly owned subsidiary of the Company, supports the Company's sales efforts in Europe. The Company has installed approximately 400 systems in over 45 countries on six continents. The Company's customers include virtually all major glass manufacturers and processors, such as DaimlerChrysler Corporation, Guardian Industries Corp., PPG Industries, Inc. and Visteon Corporation (formerly a subsidiary of Ford Motor Company) in the United States; Compagnie de Saint-Gobain, Pilkington plc and Rioglass S.A. in Europe; Asahi Glass Company, Central Glass Company and Nippon Sheet Glass Company in Japan; Hankuk Glass Industry Company and Kumgang Korea Chemical Co., Limited in Korea; and Shatterprufe (Pty) Limited in South Africa. As part of its marketing process, the Company maintains ongoing customer relationships that enable management to understand its customers' needs for existing and new product capabilities. Due to the size of a Glasstech system, from both a physical and economic perspective, a significant commitment with respect to planning is required on the part of the Company's customers before they order new equipment and subsequently place it into operation. As part of this planning process, the customer involves the Company in discussions that can last up to one or two years before an order is actually placed. At any point in time, the Company and its customers are involved in numerous discussions that occur between their respective management teams, technical staffs and sales/purchasing staffs. 8 9 The customer service staff provides aftermarket technical support and gathers information from customers regarding specific product improvement recommendations for Glasstech systems. Customer service representatives are also available to the Company's customers as consultants on a per diem basis. The Company's technical representatives train the customer's workforce to properly operate its Glasstech system and consult on specific technical issues or production goals. The Company's customer service department has a program that provides customers with 24-hour troubleshooting services via telephone. In-house computers enable the Company to simulate system problems that a customer might experience and provide the customer with prompt solutions. Installation of a Glasstech system typically requires 12 months from the time the customer executes a contract to final acceptance of the system. Completion of aftermarket sales varies with each product and can take anywhere from 24 hours to 10 months to complete. A substantial portion of the Company's revenue historically has been comprised of sales to a limited number of customers. For example, in fiscal years 1998, 1999 and 2000, Asahi Glass Company, Compagnie de Saint-Gobain, Guardian Industries Corp., Rioglass S.A. and Visteon Corporation collectively accounted for 50.9%, 47.6% and 39.1% of total revenue, respectively. In addition; (i) in fiscal 1998, Asahi Glass Company and Visteon Corporation each accounted for more than 10.0% of revenue, (ii) in fiscal 1999 Asahi Glass Company, Compagnie de Saint-Gobain and Visteon Corporation each accounted for more than 10.0% of revenue and (iii) in fiscal 2000 Asahi Glass Company, Guardian Industries Corp. and Rioglass S.A. each accounted for more than 10.0% of revenue. INTERNATIONAL The Company's revenue by geographic region for the fiscal years ending June 30 is as follows (dollars in thousands): 1998 1999 2000 ------------ ------------ --------- Europe $11,518 $10,338 $ 8,053 Asia-Pacific 27,654 14,189 5,555 Latin America 5,384 1,638 4,072 Other 1,523 385 333 --------- ---------- --------- Total Non-United States Revenue 46,079 26,550 18,013 United States 23,509 23,995 29,009 -------- -------- -------- Total Net Revenue $69,588 $50,545 $47,022 ======= ======= ======= The Company generates a substantial portion of its revenue outside of the United States and during fiscal 1998, 1999 and 2000, approximately 39.7%, 28.1% and 11.8% of the Company's net revenue was derived from sales of products to customers located in the Asia-Pacific region (Australia, China, Indonesia, Japan, Malaysia, New Zealand, Pakistan, the Philippines, Singapore, South Korea, Taiwan, and Thailand). Management believes the economic uncertainties surrounding the Asia-Pacific region for the previous three years may be subsiding, with the Company seeing an increase in quoting activity for the region. However, given the inherent difficulty in predicting with certainty the timing of contract signings and geographic areas into which equipment will be delivered in fiscal 2001 and beyond, the ultimate impact of this situation on the Company's financial performance in fiscal 2001 and beyond is impossible to predict. The Company will continue to monitor the situation in the Asia-Pacific region. Notwithstanding the current economic conditions in the Asia-Pacific region, the Company believes that given world demographics and long term economic trends, the Asia-Pacific region will continue to represent a significant market for the Company's products and it intends to continue its presence in this area. 9 10 COMPETITION The principal competitive factors in the Automotive Market are price and system capabilities or specifications. The Company's primary competition in the Automotive Market comes from the engineering departments of certain of its customers, such as Pilkington plc and Compagnie de Saint-Gobain, which design and build glass processing systems in-house. The Company primarily competes against its customers by developing systems with greater capabilities than those currently produced in-house. Management believes that the Company has a significant share of the market for technologically advanced systems used to bend and temper automotive glass into complex shapes and is the only significant independent supplier. In the Architectural Market, there is significant competition among manufacturers of flat glass tempering systems, but less significant competition for bending and tempering systems. The Company's principal competitor in the Architectural Market is Tamglass Oy of Finland, which competes against the Company mainly in the market for flat glass tempering systems. PATENTS AND PROPRIETARY RIGHTS The Company protects its technology by filing patents and patent applications in the U.S. and in major markets worldwide. It is the Company's policy to aggressively pursue patent coverage for significant product developments. The Company owns or holds exclusive rights in 125 patents in the U.S. and more than 375 patents outside the United States. In addition, the Company has more than 175 patent application filings worldwide. Typically, within each Glasstech system, several patents cover various controls, bending processes or other aspects of the equipment. While management does not believe that the loss of any one patent would have a material adverse effect on the Company's business, it believes that the Company's patent position is material in the aggregate. In the ordinary course of business, the Company is required to defend its patented technology from possible or actual infringement that may occur. The Company's patents cover a range of products and product features, including: (i) the Quick-Sag System; (ii) the Company's complex in-furnace bending process (used in both Deep Bending and In-line Systems); (iii) the Cylindrical Bending System; (iv) quenching systems; (v) process controls for systems; and (vi) other aspects of its technologies and equipment. As patents on some of the Company's older technologies, such as the Quick-Sag System, begin to expire, the Company continually applies for, and is generally issued, patents relating to its newer, leading edge technologies. The Company received funding from GRI for the development of the FCH technology. Under an agreement with GRI, GRI retained rights to the resulting U.S. patents. Under the GRI agreement, the Company received two exclusive patent licenses in the U.S. One license permits the Company to use FCH technology in systems that produce flat tempered glass (the "Flat License") and the other license permits the Company to use FCH technology in systems that produce bent glass (the "Bent License"). The exclusivity with respect to the Flat License and Bent License will continue for the duration of the patents, subject to minimum calendar year royalty obligations as follows: 2000-$90, 2001-$150, 2002-$220, 2003-$300 and 2004-$400. Management expects to meet the minimum calendar year royalty for 2000 and believes the minimum calendar year royalties for the remainder of the years are obtainable. Under the terms of the GRI agreement, the Company holds the exclusive rights to the FCH patents outside of the U.S. Substantially all Company employees execute technology agreements that have a confidentiality provision and assign patent rights to the Company. Members of senior management have entered into employment agreements that contain noncompete provisions. 10 11 MATERIALS AND SUPPLY ARRANGEMENTS In an effort to consolidate purchasing and reduce overall operating costs, the Company is currently working on "partnership" agreements with several major suppliers. However, the Company will not be obligated to volume requirements with any supplier and will continue to seek backup suppliers for use if any of its primary suppliers is unable to fill Company orders. In fiscal 2000, the Company did not purchase more than 10% of its materials and supplies from any one supplier. ENVIRONMENTAL MATTERS The Company's operations and properties are subject to a wide variety of increasingly complex and stringent federal, state and local laws and regulations, including those governing the use, storage, handling, generation, treatment, emission, release, discharge and disposal of certain materials, substances, and wastes, the remediation of contaminated soil and groundwater, and the health and safety of employees (collectively, the "Environmental Laws"). As such, the nature of the Company's operations exposes it to the risk of claims with respect to such matters and there can be no assurance that material costs or liabilities will not be incurred in connection with such claims. Management believes its operations and properties are in compliance in all material respects with Environmental Laws. Based upon its experience to date, management believes that the future cost of compliance with and liability under existing Environmental Laws will not have a material adverse effect on the Company's business, financial condition or operating results. However, future events, such as the discovery of new information, changes in existing Environmental Laws or their interpretations and more vigorous enforcement policies of regulatory agencies, may give rise to additional expenditures or liabilities that could be material. EMPLOYEES As of June 30, 2000, the Company employed 184 people compared to 192 at June 30, 1999. The Company has no union employees, and no attempt has ever been made to organize its workforce. Management believes that its relations with its employees are good. BACKLOG The Company had a backlog (on a percentage of completion basis) of approximately $17.4 million at June 30, 2000 as compared to approximately $12.1 million at June 30, 1999. The Company expects to complete a substantial majority of this backlog within the next 12 months. 11 12 ITEM 2. PROPERTIES. The Company's facilities are located in Perrysburg, Ohio. The Company leases a 96,800 square foot facility that houses its offices and plant, as well as an adjacent 43,200 square foot facility for production and storage. The 96,800 square foot facility is subject to a five-year lease that will expire on December 31, 2005, after which the Company has an option to extend the lease for one additional five-year period. The 43,200 square foot building is subject to a three-year lease that will expire on January 31, 2003. The Company also owns an adjacent 108,000 square foot building that house R&D, tooling design, tooling production and demonstration glass tempering furnaces. The Company believes that its current facilities are adequate for its foreseeable needs. ITEM 3. LEGAL PROCEEDINGS. The Company is subject to legal proceedings and claims that arise from time to time in the ordinary course of its business. Management believes that the amount of any ultimate liability with respect to these actions will not have a material adverse effect on the financial condition or results of operations of the Company. ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS. Not applicable. 12 13 PART II ITEM 5. MARKET FOR REGISTRANT'S COMMON STOCK AND RELATED MATTERS. There is no established public trading market for the common stock of the Company. The sole shareholder of the Company is Holding, a holding company formed for the purpose of acquiring all of the outstanding stock of the Company. Holding has no significant activities other than its investment in the Company. The Company has not declared or paid cash dividends to Holding. The Company anticipates that all of its earnings in the near future will be retained for the repayment of interest and debt and, therefore, does not anticipate paying dividends on its common stock in the foreseeable future. Declaration of dividends on the common stock will depend upon levels of indebtedness, future earnings, the operating and financial condition of the Company, its capital requirements and general business conditions, among other things. In addition, the agreements governing the Company's indebtedness contain provisions that restrict the ability of the Company to pay dividends on its common stock. 13 14 ITEM 6. SELECTED FINANCIAL DATA. The following table sets forth selected historical consolidated financial and other data of the Company, which have been derived primarily from the Company's audited consolidated financial statements. Amounts reported for financial reporting purposes in fiscal 1998 represent the period from July 2, 1997 to June 30, 1998. The information presented below should be read in conjunction with "Item 7- Management's Discussion and Analysis of Financial Condition and Results of Operations" and the Company's consolidated financial statements and notes thereto included elsewhere in this Form 10-K. All dollar amounts in this section are in thousands.
PREDECESSOR COMPANY SUCCESSOR COMPANY ------------------- ----------------- YEARS ENDED JUNE 30, -------------------------------------------------------------------------- 1996 1997 1998 1999 2000 ---- ---- ---- ---- ---- STATEMENT OF OPERATIONS DATA: Net revenue $ 62,771 $ 76,433 $ 69,588 $ 50,545 $ 47,022 Cost of goods sold 39,024 45,603 37,760 31,768 29,411 -------- -------- -------- -------- -------- Gross profit 23,747 30,830 31,828 18,777 17,611 Selling, general and administrative 10,724 12,866 11,035 8,632 7,626 Research and development 4,557 4,594 4,247 3,368 3,633 Amortization expense 2,407 2,306 4,356 4,243 4,243 -------- -------- -------- -------- -------- Operating profit 6,059 11,064 12,190 2,534 2,109 Interest expense (4,200) (4,200) (9,643) (9,668) (9,668) Other income - net 1,541 2,263 525 352 261 -------- -------- -------- -------- -------- Income (loss) before income taxes 3,400 9,127 3,072 (6,782) (7,298) Income taxes not payable in cash (a) (1,418) (2,551) (2,249) -- -- Federal income taxes, current (105) (78) -- -- -- -------- -------- -------- -------- -------- Net income (loss) $ 1,877 $ 6,498 $ 823 $(6,782) $(7,298) ======== ======== ======== ======== ========= OTHER DATA: EBITDA (b) $9,780 $14,829 $18,002 $8,242 $7,705 Depreciation and amortization (c) 3,721 3,765 5,812 5,708 5,596 Capital Expenditures 2,152 990 349 47 223 Backlog 38,907 30,307 34,848 12,141 17,394 CASH FLOW PROVIDED BY (USED IN): Operating activities $22,521 $ 8,973 $ 7,921 $(4,403) $(2,790) Investing activities (1,663) (978) (75,521) (57) (203) Financing activities 125 (5) 80,721 -- -- BALANCE SHEET DATA (AT END OF PERIOD): Working capital $27,599 $39,519 $ 6,538 $ 4,896 $ 3,768 Total assets 95,977 99,364 102,919 88,662 81,111 Total debt 42,000 42,000 69,357 69,464 69,572 Shareholders' equity (capital deficiency)(d) 22,652 29,232 12,545 5,763 (1,535)
14 15 (a) Income taxes not payable in cash represent the tax effect of certain acquired temporary differences existing prior to the Transactions and are recorded as a reduction to goodwill. Such amounts existing prior to the Reorganization were recorded as a reduction to reorganization value in excess of amounts allocable to identifiable assets as required by SOP 90-7. (b) EBITDA for any period means operating profit plus depreciation and amortization. Management understands that EBITDA is an indicator customarily used by investors to gauge a company's ability to service its interest and principal obligations. EBITDA should not be considered in isolation from, as a substitute for or as being more meaningful than net income, cash flows from operating, investing and financing activities, or other income or cash flow statement data prepared in accordance with generally accepted accounting principles, and should not be construed as an indication of the Company's operating performance or as a measure of liquidity. EBITDA, as presented herein, may be calculated differently by other companies and, as such, EBITDA amounts presented herein may not be comparable to other similarly titled measures of other companies. (c) Depreciation and amortization does not include the amortization of deferred financing costs, which is recorded with interest expense. (d) The Company has not declared or paid any dividends to its shareholders since the Transaction. 15 16 ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS. GENERAL OVERVIEW The Company designs and assembles glass bending and tempering (i.e., strengthening) systems which are used by glass manufacturers and processors in the conversion of flat glass into safety glass. Systems are sold worldwide, primarily to automotive glass manufacturers and processors and, to a lesser extent, to architectural glass manufacturers and processors. Revenues generated by the sale of new systems are referred to below as "Original Equipment." The Company has an installed base of approximately 400 systems in over 45 countries on six continents. As a result of its installed base and the relatively long useful life of a system, the Company also engages in sales of aftermarket products and services (retrofit of systems with upgrades, tooling used to shape glass parts, replacement parts and technical services). Revenues generated by these types of products are referred to below as "Aftermarket." In this MD&A section all dollar amounts are in thousands, unless otherwise indicated. REVENUES For financial reporting purposes, the Company includes in income the ratable portion of profits on uncompleted contracts determined in accordance with the stage of completion measured by the percentage of costs incurred to estimated total costs of each contract (generally, Original Equipment, system retrofits and tooling). Unbilled amounts included in uncompleted contract receivables represent revenues recognized in excess of amounts billed. Billings in excess of costs and estimated earnings on uncompleted contracts represent amounts billed in excess of revenues recognized. Revenue from sales other than contracts (spare parts and engineering services) is recognized when the products are shipped. SELLING EXPENSE The Company maintains an in-house sales staff and uses the services of commissioned agents around the world for the sale of Original Equipment and aftermarket products and services. In addition, the Company maintains a sales and engineering support office in the United Kingdom. The substantial majority of the Company's Original Equipment is sold directly to the largest glass manufacturers and processors in the world or their affiliates. RESEARCH AND DEVELOPMENT The Company believes it is the technological leader in the design and assembly of glass bending systems. The Company works with customers to identify product needs and market requirements. Periodically, the Company enters into joint development agreements with customers. From time to time, the Company allocates a portion of its R&D resources to complete the transition from new product development to new product introduction. When the Company does this, these expenses are charged directly to the contracts relating to the introduction of new products. The Company considers R&D expenses and new product introductions a very integral part of its future success. 16 17 MANAGEMENT'S ESTIMATES RELATED TO ASIA-PACIFIC CONTRACTS In the ordinary course of business, management continually makes estimates on a variety of matters ranging from percentage of completion of products to collectibility of future payments. Due to the economic uncertainties evolving in the Asia-Pacific region toward the end of fiscal 1997, management undertook a careful review of each contract from that region which was still incomplete at June 30, 1997. This review led management to conclude that the then unfolding uncertainty and instability in the Asia-Pacific region placed the collection of the final payments on many of these contracts at significant risk. Accordingly, management increased estimated costs on Asia-Pacific contracts by an amount equal to the final payments due on these contracts. During the course of fiscal 1998, the substantial majority of these contracts were completed in due course. Subsequently, aggressive and diligent collection efforts by management resulted in the eventual collection of the final payments owed on these contracts. In retrospect, the ultimate collection of these payments had the effect of deferring revenue recognition from fiscal 1997 to fiscal 1998, with net revenues, gross profit, operating income, net income and EBITDA being positively impacted in fiscal 1998 approximately as follows: $5,200, $5,200, $4,100, $2,500 and $4,100, respectively. None of operating income, net income nor EBITDA reflected the full impact of the $5,200 net revenue increase, due to the manner in which bonuses were calculated and the changes in effective tax rates. However, the increase in estimated costs for loss exposures related to the Asia-Pacific region contracts at June 30, 1997 had no impact on net cash provided by operating activities since the cash payments were scheduled to be made, and were made, during fiscal 1998, all as originally provided in the underlying contracts. Management believes that the magnitude of the change in estimates described above represented a unique situation attributed to the following factors: (1) at the end of fiscal 1997, contracts in process from the Asia-Pacific region represented a significant percentage of total contracts in process, both in number of contracts and dollar exposure, and (2) the depth of the economic uncertainty in that region at June 30, 1997. Management does not believe that the magnitude of the changes in estimates experienced in fiscal 1998 is likely to recur. No increases in estimated costs of similar magnitude were made either at June 30, 1998, June 30, 1999 or June 30, 2000. 17 18 RESULTS OF OPERATIONS The following table presents the amounts and the percentage of total net revenue for certain revenue and expense items for the periods indicated:
YEARS ENDED JUNE 30 ----------------------------------------------------------------------------- 1998 1999 2000 ---------------------- ---------------------- ---------------------- Net revenue(a) Original Equipment $ 48,873 70.2% $ 28,885 57.1% $ 27,199 57.8% Aftermarket 20,715 29.8 21,660 42.9 19,823 42.2 -------- ----- -------- ----- -------- ----- Total net revenue 69,588 100.0 50,545 100.0 47,022 100.0 Cost of goods sold(a) 37,760 54.3 31,768 62.9 29,411 62.6 -------- ----- -------- ----- -------- ----- Gross profit 31,828 45.7 18,777 37.1 17,611 37.4 SG&A expense 11,035 15.8 8,632 17.1 7,626 16.2 R&D expense 4,247 6.1 3,368 6.6 3,633 7.7 Amortization expense(b) 4,356 6.3 4,243 8.4 4,243 9.0 -------- ----- -------- ----- -------- ----- Operating profit $ 12,190 17.5% $ 2,534 5.0% $ 2,109 4.5% ======== ===== ======== ===== ======== ===== Amortization expense(b) 4,356 6.3 4,243 8.4 4,243 9.0 Depreciation expense 1,456 2.1 1,465 2.9 1,353 2.9 -------- ----- -------- ----- -------- ----- EBITDA $ 18,002 25.9% $ 8,242 16.3% $ 7,705 16.4% ======== ===== ======== ===== ======== =====
(a)Contract revenue and cost of goods sold are recognized on a percentage completion basis measured by the percentage of costs incurred to the estimated total costs of each contract. (b)Amortization expense excludes the amortization of deferred financing costs that is included with interest expense. FISCAL YEAR 2000 COMPARED WITH FISCAL YEAR 1999 Net revenue for fiscal 2000 decreased $3,523, or 7.0%, to $47,022 from $50,545 for fiscal 1999. Original Equipment revenue decreased $1,686, or 5.8%, to $27,199 for fiscal 2000 compared to $28,885 for fiscal 1999. This decrease in Original Equipment revenue was due in part to lower new contract signings in fiscal 1999, which resulted in a low beginning backlog for fiscal 2000. In addition, the timing and/or deferral of contract signings in the Asia-Pacific and other foreign regions negatively impacted the Company's ability to generate revenue in fiscal 2000. Aftermarket revenue decreased $1,837, or 8.5%, to $19,823 for fiscal 2000 from $21,660 for fiscal 1999. The decrease in aftermarket revenue was primarily the result a decline in retrofit revenue. Retrofit revenues fluctuate based on customer demands and are influenced by a variety of factors, including economic conditions and the customers' retrofit schedules. A significant portion of the Company's revenue is generated from customers outside of the United States. For fiscal 2000, Original Equipment revenue from foreign customers was $8,683 (31.9% of total Original Equipment revenue) as compared to $13,698 (47.4% of total Original Equipment revenue) for fiscal 1999. The percentage of aftermarket revenue from foreign customers decreased to 47.1% of total aftermarket revenue for fiscal 1999 compared to 59.3% for fiscal 1999. Gross profit decreased $1,166 to $17,611, at a gross margin percentage of 37.4% for fiscal 2000 compared to $18,777, at a gross margin of 37.1% for fiscal 1999. The decline in the gross profit is the result of the decrease in revenues. The Company's continued efforts to reduce and minimize its production costs, including factory overhead, has mitigated the effects on the gross margin. Selling, general and administrative expenses decreased $1,006, or 11.7%, to $7,626 for fiscal 2000 from $8,632 for fiscal 1999. This decrease was primarily the result of no incentive compensation costs in 18 19 fiscal 2000 due to decreased earnings and other cost containment measures implemented. Research and development expenses increased $265, or 7.9%, to $3,633 for fiscal 2000 from $3,368 for fiscal 2000. In fiscal 1999, an increased level of development resources was dedicated to the completion of certain original equipment contracts. Operating profit decreased $425, or 16.8%, to $2,109 for fiscal 2000 from $2,534 for fiscal 1999. Operating profit, as a percentage of revenue, was 4.5% for fiscal 2000 as compared to 4.5% for fiscal 1999. The decrease in operating profit was the result of the decline in gross profit partially offset by the decrease in selling, general and administrative expenses. No income tax expense or benefit has been provided for fiscal 2000 and 1999 due to the recorded losses and the uncertainty related to the future realization of such amounts. Net loss was $7,298 for fiscal 2000 compared to $6,782 for fiscal 1999. The net losses were the result of the decline in operating profits. EBITDA, which is defined as operating profit plus depreciation and amortization, decreased $537, or 6.5%, to $7,705 for fiscal 2000 from $8,242 for fiscal 1999. FISCAL YEAR 1999 COMPARED WITH FISCAL YEAR 1998 Net revenue for fiscal 1999 decreased $19,043, or 27.4%, to $50,545 from $69,588 for fiscal 1998. Original Equipment revenue decreased $19,988, or 40.9%, to $28,885 for fiscal 1999 compared to $48,873 for fiscal 1998. The continuing economic difficulties in the Asia-Pacific and other foreign regions have adversely impacted new contract signings of Original Equipment in fiscal 1999, resulting in a decrease in Original Equipment revenue. Aftermarket revenue increased $945, or 4.6%, to $21,660 for fiscal 1999 from $20,715 for fiscal 1998. The increase in aftermarket revenue was the result of increased tooling revenue partially offset by a decline in retrofit revenue. Tooling and retrofit revenue fluctuate based on customer demands and are influenced by a variety of factors, including economic conditions and the customers' retrofit schedules and the timing of automotive manufacturers' design changes, which may impact the release of tooling orders. For fiscal 1999, Original Equipment revenue from foreign customers was $13,698 (47.4% of total Original Equipment revenue) as compared to $31,287 (64.0% of total Original Equipment revenue) for fiscal 1998. The percentage of aftermarket revenue from foreign customers decreased to 59.3% of total aftermarket revenue for fiscal 1999 compared to 71.4% for fiscal 1998. Gross profit decreased $13,051 to $18,777, at a gross margin percentage of 37.1% for fiscal 1999 compared to $31,828, at a gross margin of 45.7% for fiscal 1998. The decline in the gross margin is the result of a shift in the current product mix from higher margin automotive contracts to lower margin architectural contracts and developmental (first of a kind) automotive contracts, which generally carry lower margins. In addition, although the Company continues to reduce and minimize its production costs (including reductions in workforce and factory overhead) gross margins have decreased, in part, as a result of fixed factory overhead being applied to lower production volume. Selling, general and administrative expenses decreased $2,403, or 21.8%, to $8,632 for fiscal 1999 from $11,035 for fiscal 1998. This decrease was primarily the result of lower incentive compensation costs due to decreased earnings and other cost containment measures implemented, including workforce reductions. Research and development expenses decreased $879, or 20.7%, to $3,368 for fiscal 1999 from 19 20 $4,247 for fiscal 1999. This decrease was primarily the result of an increase in development resources dedicated to the completion of certain original equipment contracts and other cost containment measures implemented, including workforce reductions. Operating profit decreased $9,656, or 79.2%, to $2,534 for fiscal 1999 from $12,190 for fiscal 1998. Operating profit, as a percentage of revenue, was 5.0% for fiscal 1999 as compared to 17.5% for fiscal 1998. The decrease in operating profit was the result of the decline in gross profit partially offset by decreases in selling, general and administrative expenses and research and development expenses. No income tax expense or benefit has been provided for fiscal 1999 due to the recorded loss and the uncertainty related to the future realization of such amounts. The effective tax rate for fiscal 1998 was 73.2%. The effective tax rate for fiscal 1998 differs from the Company's statutory tax rate due to the effects of certain amounts not deductible for income tax purposes, consisting primarily of goodwill amortization. As a result of the Transaction, amortization expense related to goodwill increased significantly, resulting in the unusually high effective tax rate for fiscal 1998. Net loss was $6,782 for fiscal 1999 compared to net income of $823 for fiscal 1998. The net loss was the result of the decline in operating profit. EBITDA, which is defined as operating profit plus depreciation and amortization, decreased $9,760, or 54.2%, to $8,242 for fiscal 1999 from $18,002 for fiscal 1998. LIQUIDITY AND CAPITAL RESOURCES The Company's liquidity and capital resources were significantly impacted by the Transaction. The Company's primary sources of liquidity are funds provided by operations and amounts available under the Credit Facility. The Senior Notes do not require any principal payments prior to maturity. The Credit Facility is available to fund working capital requirements as needed, and to secure standby letters of credit. The Credit Facility provides for borrowings up to $10,000 (including standby letters of credit), subject to a borrowing base of certain qualifying assets. At June 30, 2000, the borrowing base approximated $8,100 and the Company had no outstanding borrowings or standby letters of credit. The credit facility is secured by substantially all of the assets of the Company. The Company is in compliance with all material covenants in the Senior Notes and Credit Facility. Net cash provided by (or net cash used in) operating activities can vary significantly from quarter to quarter or year to year due to the number of new system signings and the amount and timing of new system payments. In most instances, progress payments on new system orders are invoiced or received in advance of revenue recognition. When progress payments are invoiced or received in advance of such revenue recognition, the Company increases current liabilities represented by its billings in excess of costs and estimated earnings on uncompleted contracts. When the revenue is earned, the Company recognizes the revenue and reduces the billings in excess of costs and estimated earnings on uncompleted contract balances. Net cash used by operating activities for fiscal 2000 was $2,790, compared to $4,403 for fiscal 1999. This improvement in net cash used by operating activities for fiscal 2000 was due in part to an increase in new system signings and the timing of new system payments. The Company has a backlog (on a percentage of completion basis) at June 30, 2000 of approximately $17,394 as compared to $12,141 at June 30, 1999. The Company expects to complete a substantial majority of this backlog within the next 12 months. Capital expenditures, including demonstration furnaces classified as fixed assets, were $223 for fiscal 2000 compared to $47 for fiscal 1999. Future capital expenditures, excluding demonstration furnaces, used 20 21 to replace or improve operating equipment and facilities are estimated to be less than $1,000 per year. In addition, the Company intends to make periodic replacements and improvements on demonstration furnaces, which are used for customer demonstrations and research and development purposes. Demonstration furnaces, which outlive their usefulness for customer demonstrations or research and development purposes, or both, may be refurbished and sold or put to other applicable uses. At June 30, 2000, the Company has net operating loss ("NOL") carryforwards for regular and alternative minimum tax purposes of approximately $46,559 and $43,372, respectively, which expire in the years 2009 through 2015. Although the Company's ability to generate cash has been affected by the increased interest costs resulting from the Transaction and the lower level of contract signings in fiscal 2000 and 1999, management believes that internally generated funds, together with amounts available under the Credit Facility, will be sufficient to satisfy the Company's operating cash and capital expenditure requirements, make required payments under the Credit Facility and make scheduled interest payments on the Senior Notes. However, the ability of the Company to satisfy its obligations will ultimately be dependent upon the Company's future operating and financial performance, including increasing contract signings, and upon its ability to renew or refinance borrowings or to raise additional equity capital as necessary. The Company's business is subject to rapid fluctuations due to changes in the world markets for the end products produced by its equipment (largely in the cyclical markets of automobiles and construction), currency fluctuations, the local economies of those countries where users and potential users of the Company's equipment are located, geopolitical events and other macroeconomic forces largely beyond the ability of the Company to predict or control. Except as discussed below, management is not currently aware of any trends, demands, commitments or uncertainties which will or which are reasonably likely to result in a material change in the Company's liquidity. During fiscal 1998, 1999 and 2000, approximately 39.7%, 28.1% and 11.8% of the Company's net revenue was derived from sales of products to customers located in the Asia-Pacific region (Australia, China, Indonesia, Japan, Malaysia, New Zealand, Pakistan, the Philippines, Singapore, South Korea, Taiwan, and Thailand). Management believes the economic uncertainties surrounding the Asia-Pacific region for the previous three years may be subsiding, with the Company seeing an increase in quoting activity for the region. However, given the inherent difficulty in predicting with certainty the timing of contract signings and geographic areas into which equipment will be delivered in fiscal 2001 and beyond is impossible to predict. The Company will continue to monitor the situation in the Asia-Pacific region. Notwithstanding the current economic conditions in the Asia-Pacific region, the Company believes that given world demographics and long term economic trends, the Asia-Pacific region will continue to represent a significant market for the Company's products and it intends to continue its presence in this area. INFLATION Management believes that the Company's operations have not been adversely affected by inflation. 21 22 ITEM 7(a). MARKET RISK EXPOSURES Based on the Company's current operations and business practices, the Company does not believe that it has any significant exposure to interest rate, foreign currency, commodity price, or equity price market risks. 22 23 ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA. INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Page ---- CONSOLIDATED FINANCIAL STATEMENTS: Report of Independent Auditors......................................................................................24 Consolidated Balance Sheets as of June 30, 2000 and 1999............................................................25 Consolidated Statements of Operations for the Years Ended June 30, 2000, 1999 and 1998..............................26 Consolidated Statements of Shareholder's Equity (Capital Deficiency) for the Years Ended June 30, 2000, 1999 and 1998........................................................................................27 Consolidated Statements of Cash Flows for the Years Ended June 30, 2000, 1999 and 1998..............................28 Notes to Consolidated Financial Statements..........................................................................29
23 24 REPORT OF INDEPENDENT AUDITORS The Board of Directors and Shareholder Glasstech, Inc. We have audited the accompanying consolidated balance sheets of Glasstech, Inc. as of June 30, 2000 and 1999, and the related consolidated statements of operations, shareholder's equity (capital deficiency), and cash flows for each of the three years in the period ended June 30, 2000. Our audits also included the financial statement schedule listed in the index at Item 14(a). These financial statements and schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits. We conducted our audits in accordance with auditing standards generally accepted in the United States. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as an evaluation of the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion. In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of Glasstech, Inc. at June 30, 2000 and 1999, and the consolidated results of its operations and its cash flows for each of the three years in the period ended June 30, 2000, in conformity with accounting principles generally accepted in the United States. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein. ERNST & YOUNG LLP Toledo, Ohio August 11, 2000 24 25 GLASSTECH, INC. CONSOLIDATED BALANCE SHEETS (DOLLARS IN THOUSANDS)
JUNE 30 2000 1999 ---------------- ----------------- ASSETS Current assets: Cash and cash equivalents $ 5,668 $ 8,661 Accounts receivable: Contracts: Uncompleted, including unbilled amounts of $2,211 and $1,430 4,820 3,602 Completed 1,626 459 Trade, less allowance of $40 for doubtful accounts 1,631 1,469 ---------------- ----------------- 8,077 5,530 Inventory: Replacement and service parts 1,675 1,999 Furnace and other 687 1,368 ---------------- ----------------- 2,362 3,367 Prepaid expenses 279 350 ---------------- ----------------- Total current assets 16,386 17,908 Property, plant and equipment, net 5,650 6,789 Other assets: Patents, less accumulated amortization of $5,181 and $3,454 13,102 14,829 Goodwill, less accumulated amortization of $7,660 and $5,145 42,765 45,280 Deferred financing costs and other 3,208 3,856 ---------------- ----------------- Total other assets 59,075 63,965 ---------------- ----------------- $ 81,111 $88,662 ================ ================= LIABILITIES AND SHAREHOLDER'S EQUITY (CAPITAL DEFICIENCY) Current liabilities: Accounts payable $ 2,786 $ 1,710 Billings in excess of costs and estimated earnings on uncompleted contracts 2,289 3,250 Accrued liabilities: Interest 4,462 4,462 Salaries and wages 1,232 1,702 Contract costs 876 795 Other 973 1,094 ---------------- ----------------- 7,543 8,053 ---------------- ----------------- Total current liabilities 12,618 13,013 Long-term debt 69,572 69,464 Nonpension postretirement benefit obligation 456 422 Shareholder's equity (Capital deficiency): Common stock $.01 par value; 1,000 shares authorized, issued and outstanding - - Additional capital 15,750 15,750 Shareholder's basis reduction (4,028) (4,028) Retained deficit (13,257) (5,959) ---------------- ----------------- Total shareholder's equity (capital deficiency) (1,535) 5,763 ---------------- ----------------- $ 81,111 $ 88,662 ================ =================
See accompanying notes. 25 26 GLASSTECH, INC. CONSOLIDATED STATEMENTS OF OPERATIONS (DOLLARS IN THOUSANDS)
YEARS ENDED JUNE 30 2000 1999 1998 ---------------- ----------------- ---------------- Net revenue $47,022 $50,545 $69,588 Cost of goods sold 29,411 31,768 37,760 ----------------------------------------------------- Gross profit 17,611 18,777 31,828 Selling, general and administrative expenses 7,626 8,632 11,035 Research and development expenses 3,633 3,368 4,247 Amortization expense 4,243 4,243 4,356 ----------------------------------------------------- Operating profit 2,109 2,534 12,190 Interest expense (9,668) (9,668) (9,643) Other income - net 261 352 525 ----------------------------------------------------- Income (loss) before income taxes (7,298) (6,782) 3,072 Income taxes not payable in cash - - (2,249) ----------------------------------------------------- Net income (loss) $ (7,298) $ (6,782) $ 823 =====================================================
See accompanying notes. 26 27 GLASSTECH, INC. CONSOLIDATED STATEMENTS OF SHAREHOLDER'S EQUITY (CAPITAL DEFICIENCY) (DOLLARS IN THOUSANDS)
COMMON STOCK SHAREHOLDER'S RETAINED -------------------------- ADDITIONAL BASIS EARNINGS SHARES AMOUNT CAPITAL REDUCTION (DEFICIT) TOTAL ------------------------------------------------------------------------------------------- Balance July 2, 1997 1,000 $ - $15,750 $(4,028) $ - $11,722 Net income 823 823 ------------------------------------------------------------------------------------------- Balance, June 30, 1998 1,000 - 15,750 (4,028) 823 12,545 Net loss (6,782) (6,782) ------------------------------------------------------------------------------------------- Balance, June 30, 1999 1,000 - 15,750 (4,028) (5,959) 5,763 Net loss (7,298) (7,298) ------------------------------------------------------------------------------------------- Balance, June 30, 2000 1,000 $ - $15,750 $(4,028) $(13,257) $(1,535) ===========================================================================================
See accompanying notes. 27 28 GLASSTECH, INC. CONSOLIDATED STATEMENTS OF CASH FLOWS (DOLLARS IN THOUSANDS)
YEARS ENDED JUNE 30 2000 1999 1998 ---------------- ---------------- ----------------- OPERATING ACTIVITIES Net income (loss) $ (7,298) $ (6,782) $ 823 Adjustments to reconcile net income (loss)to net cash (used in) provided by operating activities: Depreciation and amortization 6,232 6,343 6,447 Accretion of debt discount 107 107 107 Nonpension postretirement benefit obligation expense in excess of payments 34 17 15 Income taxes not payable in cash - - 2,249 Other - - 7 Changes in assets and liabilities affecting operations: Restricted cash - - 1,529 Accounts receivable (2,547) 4,475 (2,855) Inventory 1,005 (965) 832 Prepaid expenses 71 - 86 Accounts payable 1,076 (2,457) 480 Billings in excess of costs and estimated earnings on uncompleted contracts (961) (1,058) (6,583) Accrued liabilities (509) (4,083) 4,784 ----------------------------------------------------- Net cash (used in) provided by operating activities (2,790) (4,403) 7,921 INVESTING ACTIVITIES Additions to property, plant and equipment (223) (47) (349) Net assets purchased - - (74,796) Increase in long-term notes receivable - - (656) Proceeds on sale of demonstration furnace - - 270 Other 20 (10) 10 ----------------------------------------------------- Net cash used in investing activities (203) (57) (75,521) FINANCING ACTIVITIES Issuance of long-term debt and related warrants - - 70,000 Issuance of common stock - - 15,000 Deferred financing costs - - (4,279) ----------------------------------------------------- Net cash provided by financing activities - - 80,721 Increase (decrease) in cash and cash equivalents (2,993) (4,460) 13,121 Cash and cash equivalents at beginning of year 8,661 13,121 - ----------------------------------------------------- Cash and cash equivalents at end of year $ 5,668 $ 8,661 $13,121 ===================================================== Supplemental disclosure of cash flow information: Cash paid (received) during the year for the following: Interest $ 8,925 $ 8,925 $ 4,438 ===================================================== Income taxes $ (21) $ 21 $ (311) =====================================================
See accompanying notes. 28 29 GLASSTECH, INC. NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (DOLLARS IN THOUSANDS) 1. BASIS OF PRESENTATION Effective July 2, 1997, Glasstech, Inc. (the "Company") was acquired by Glasstech Holding Co. ("Holding") (the "Transaction"). In connection with the Transaction, Holding, a holding company formed for the purpose of completing the Transaction, formed a wholly owned subsidiary, Glasstech Sub Co. ("Sub Co.") which acquired all of the outstanding stock of the Company. Subsequently, Sub Co. was merged into the Company. Holding has no significant activities other than its investment in the Company. The acquisition was accounted for under the purchase method of accounting for financial reporting purposes and the purchase price of approximately $77,900 was allocated to the underlying net assets acquired. In connection with accounting for the Transaction, the Company applied the provisions of Emerging Issues Task Force Issue 88-16 (EITF 88-16), whereby the carryover equity interests of certain shareholders from the predecessor company were recorded at their predecessor basis. As a result, shareholder's equity of the Company was reduced by $4,028 with a corresponding reduction to the value of goodwill acquired. The Company has two wholly owned subsidiaries, Glasstech Ltd., a corporation in the United Kingdom, and Stir-Melter, Inc., a domestic subsidiary, which are consolidated for financial reporting purposes. All significant intercompany amounts and transactions have been eliminated. The Company designs and manufactures glass bending and tempering equipment and markets and sells such equipment worldwide to both automotive glass fabricators and architectural glass producers. Glasstech Ltd. provides engineering, sales, and service support in Europe, the Middle East, and Africa. Stir-Melter, Inc. designs and markets glass-melting equipment for the treatment of certain waste products. 2. SIGNIFICANT ACCOUNTING POLICIES REVENUE RECOGNITION For financial reporting purposes, the Company includes in income the ratable portion of profits on uncompleted contracts determined in accordance with the stage of completion measured by the percentage of costs incurred to estimated total costs of each contract. For income tax purposes, contracts are accounted for on the inventory accrual basis, whereby income is recognized when the customer accepts the equipment. Unbilled amounts included in uncompleted contract accounts receivable represent revenues recognized in excess of amounts billed. Billings in excess of costs and estimated earnings on uncompleted contracts represent amounts billed in excess of revenues recognized. Revenue from sales other than contracts is recognized when the products are shipped. CREDIT PRACTICES Credit terms are granted to customers and periodically revised based on evaluations of the customer's financial condition with collateral generally not being required. In certain instances, letters of credit may be obtained to secure payment. 29 30 2. SIGNIFICANT ACCOUNTING POLICIES (CONTINUED) CASH AND CASH EQUIVALENTS The Company considers all unrestricted highly liquid investments with a maturity of three months or less when purchased to be cash equivalents. INVENTORY Inventory is stated at the lower of cost or market determined by the first-in, first-out (FIFO) method. DEPRECIATION AND AMORTIZATION Depreciation is based on the estimated useful lives of the assets and is generally computed using accelerated methods. Amortization of leasehold improvements is provided on the straight-line basis over the estimated useful lives of the assets or the terms of the leases, whichever is shorter. The useful lives range from 10 to 40 years for building and leasehold improvements; 3 to 12 years for machinery and equipment; 7 to 12 years for demonstration glass tempering furnaces; and 3 to 12 years for office equipment and other. Patents are being amortized on the straight-line basis over their estimated useful lives of 10 to 15 years. Goodwill is being amortized on the straight-line basis over 20 years. The Company periodically reviews goodwill to assess recoverability, generally based upon expectations of nondiscounted cash flows, excluding interest and taxes, and operating income. Deferred financing costs are being amortized over 7 years, the length of the underlying note agreement. MANAGEMENT ESTIMATES The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. At June 30, 1997, the estimated costs of contracts in the Asia Pacific region included provisions for loss exposures related to final payments that would be due upon completion of such contracts in fiscal year 1998. At the time these estimates were made, the Asia Pacific region was beginning a period of financial instability and uncertainty that placed receipt of these future final contract payments at risk. During fiscal 1998, the Company was successful in the collection of these final contract payments. These changes in estimates in fiscal 1998 resulted in additional contract revenues of $5,200 for the year ended June 30, 1998. The provisions for loss exposures related to the Asia-Pacific region contracts at June 30, 1997 had no impact on net cash provided by operating activities since the cash payments were scheduled to be made, and were made, during fiscal 1998, all as originally provided in the underlying contracts. 30 31 2. SIGNIFICANT ACCOUNTING POLICIES (CONTINUED) NEW ACCOUNTING STANDARDS In June 1998, the Financial Accounting Standards Board issued Statement No. 133, Accounting for Derivative Instruments and Hedging Activities (Statement 133) which establishes new procedures for accounting for derivatives and hedging activities and supersedes and amends a number of existing standards. Statement 133 is effective for fiscal years beginning after June 15, 2000. Statement 133 is not expected to have a significant impact on the Company. In December 1999 the SEC released Staff Accounting Bulletin (SAB) No. 101, Revenue Recognition in Financial Statements. The bulletin provides the staff's views in applying generally accepted accounting principles to selected revenue recognition issues. The SEC has since delayed the required implementation until no later than the fourth quarter of fiscal years beginning after December 15, 1999. The Company is currently evaluating the effect this bulletin may have on its financial position and results of operations. 3. PROPERTY, PLANT AND EQUIPMENT Property, plant and equipment consists of the following:
AS OF JUNE 30 2000 1999 -------------------------------- Cost: Land $ 110 $ 110 Building and leasehold improvements 2,372 2,331 Machinery and equipment 1,095 1,119 Demonstration glass tempering furnaces 4,365 4,360 Office equipment 1,918 1,730 Other 9 9 -------------------------------- 9,869 9,659 Less accumulated depreciation and amortization (4,219) (2,870) -------------------------------- Net property, plant and equipment $5,650 $6,789 ================================
4. NOTES PAYABLE AND LONG-TERM DEBT In connection with the Transaction, the Company issued $70,000 of 12-3/4% Senior Notes due 2004 (the "Old Notes") in a private offering exempt from registration under the Securities Act of 1933, as amended (the "1933 Act"). The offering of the Old Notes was also structured to permit resales under Rule 144 of the 1933 Act. In connection with the issuance of the Old Notes, the Company received from Holding warrants to purchase 877 shares of common stock of Holding valued at $750. These warrants were issued to the initial purchasers of the Old Notes. On December 2, 1997 the Company consummated an exchange offer (the "Exchange Offer") of its $70,000 Series B 12-3/4% Senior Notes Due 2004 (the "New Notes"), which were registered under the 1933 Act, for the Old Notes. The terms of the New Notes are substantially identical to the terms of the Old Notes and as used herein, will be referred to as the "Senior Notes." Interest on the Senior Notes is payable semi-annually on each January 1 and July 1. The terms of the Senior Notes do not require any scheduled principal payments prior to maturity. 31 32 4. NOTES PAYABLE AND LONG-TERM DEBT (CONTINUED) The Company also entered into a revolving credit facility ("Credit Facility") in connection with the Transaction. The Credit Facility is available to fund working capital requirements as needed, and to secure standby letters of credit. The Credit Facility provides for borrowings up to $10,000 (including standby letters of credit), subject to a borrowing base of certain qualifying assets, and provides for interest on outstanding borrowings at the LIBOR rate plus 2.5%, payable semi-annually (9.18% at June 30, 2000). The credit facility is secured by substantially all of the assets of the Company. At June 30, 2000, the Company had no outstanding borrowings or standby letters of credit under the Credit Facility and the borrowing base approximated $8,100. The Senior Notes and Credit Facility, as amended, contain numerous financial and other covenants which include the maintenance of certain levels of earnings as defined, restrictions on the payment of dividends and the incurrence of additional indebtedness as well as certain types of business activities and investments. The Company believes that it is in material compliance with all such covenants. At June 30, 2000 and 1999, the Company believes the carrying value of the Senior Notes exceeds their fair value. Although the Senior Notes are publicly traded, the trading volume is so low that the Company is unable to determine their fair value. 5. EMPLOYEE BENEFIT PLANS The Company has defined contribution retirement plans that cover substantially all employees. Contributions for the Employees' Pension Plan, which are based on participants' compensation, are funded annually, in arrears. Annual expense for this plan approximated $534, $616 and $639, for the years ended June 30, 2000, 1999 and 1998, respectively. The Company does not match contributions made by employees under the Employees' Savings Plan, a 401(k) plan. Glasstech provides certain retiree healthcare insurance benefits to eligible retired employees. Employees are generally eligible for benefits upon retirement and completion of a specified number of years of creditable service. These benefits are provided at the discretion of Glasstech and are subject to revision or termination at any time. The Company funds such costs as they are incurred. The components of the net periodic postretirement benefit cost for the years ended June 30 are as follows:
2000 1999 1998 ------------------------------------------------ Service cost (benefits earned during the period) $17 $16 $16 Interest cost on accumulated postretirement benefit obligation 36 32 31 Recognized net actuarial loss 3 - - ------------------------------------------------ Net periodic postretirement benefit cost $56 $48 $47 ================================================
32 33 5. EMPLOYEE BENEFIT PLANS (CONTINUED) The changes in the accumulated postretirement benefit obligation and amounts accrued were as follows:
2000 1999 -------------------------------- Change in accumulated postretirement benefit obligation: Benefit obligation, beginning of year $527 $405 Service cost 17 16 Interest cost 36 32 Actuarial loss (gain) (12) 106 Benefits paid (22) (32) -------------------------------- Benefit obligation, end of year $546 $527 ================================ Funded status of plan $546 $527 Unrecognized net loss (90) (105) -------------------------------- Accrued benefit obligation $456 $ 422 ================================
The assumed discount rate used in determining the accumulated postretirement benefit obligation was 7.0% at June 30, 2000 and 1999. The assumed healthcare cost trend rates used to measure the expected cost of benefits covered by this plan ranges principally from 4.25% to 5.75%, and decrease ratably to 4.20% by fiscal year 2010. 6. FEDERAL INCOME TAXES Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Significant components of the Company's deferred income tax liabilities and assets at June 30 are as follows:
2000 1999 -------------------------------- Deferred income tax liabilities: Contract revenues $(3,261) $(4,664) Tax basis differences on purchased assets (1,530) (497) Property, plant and equipment (613) (756) -------------------------------- Total deferred income tax liabilities (5,404) (5,917) Deferred income tax assets: Federal income tax operating loss carryovers 17,692 16,376 Accrued liabilities and reserves 565 630 Other 421 402 -------------------------------- Total deferred income tax assets 18,678 17,408 Less valuation allowance 13,274 11,491 -------------------------------- Net deferred income tax assets 5,404 5,917 -------------------------------- Total deferred income taxes--net $ - $ - ================================
33 34 6. FEDERAL INCOME TAX (CONTINUED) A valuation allowance has been recorded against the Company's deferred income tax assets due to the uncertainties surrounding the realization of any future tax benefit. The consolidated effective income tax rate differs from the statutory U. S. federal tax rate for the following reasons and by the following percentages:
2000 1999 1998 ------------------------------------------------ Statutory U. S. Federal tax rate (34.0)% (34.0)% 34.0% Increase (reduction) in tax rate resulting from: Effect of increase (reduction) in valuation reserve for deferred income taxes 22.1 20.9 - Amortization of goodwill 11.8 12.7 32.5 State income taxes - - 4.3 Other 0.1 0.4 2.4 ------------------------------------------------ Effective tax rate -% -% 73.2% ================================================
At June 30, 2000, the Company has net operating loss carryforwards for regular and alternative minimum tax purposes of approximately $46,559 and $43,372, respectively, which expire in the years 2009 through 2015. Such loss carryforwards have annual usage limitations which, if not utilized in a given year, may be utilized in subsequent years. Income taxes not payable in cash represent the tax effect of certain acquired temporary differences and are recorded as a reduction to goodwill. 7. LEASES The Company leases manufacturing, warehouse and office buildings under long-term agreements. The Company has the option to renew the manufacturing and office buildings leases for one additional five-year period at slightly higher rates. Total rental expense amounted to $415, $397 and $391, respectively for each of the three years in the period ended June 30, 2000. Total rental commitments under the operating leases for fiscal years subsequent to June 30, 2000 are as follows: 2001--$429, 2002--$429, 2003--$388, 2004--$165 and in aggregate $1,411. 8. GEOGRAPHIC AND CUSTOMER INFORMATION The Company operates in one industry segment, the design and manufacturer of glass bending and tempering equipment. The Company's net revenues from external customers are derived from glass bending and tempering equipment and related replacement parts and service. The Company's net revenues from external customers by geographic areas and customers who represent 10% or more of total sales for 2000, 1999 and 1998 are presented below. Long-lived assets, consisting of property, plant and equipment, patents and goodwill, located outside the United States are not significant. 34 35 8. GEOGRAPHIC AND CUSTOMER INFORMATION (CONTINUED)
2000 1999 1998 ------------------------------------------------ Net Revenue by Geographic Location: United States $29,009 $23,995 $23,509 Europe 8,053 10,338 11,518 Asia-Pacific 5,555 14,189 27,654 Latin America 4,072 1,638 5,384 Other 333 385 1,523 ------------------------------------------------ $47,022 $50,545 $69,588 ================================================
2000 1999 1998 ------------------------------------------------ Major customers percentage of net revenue: Customer A 16.5% 2.4% 1.2% Customer B 11.7 17.7 13.4 Customer C 10.3 - - Customer D 6.4 10.2 9.7 Customer E 6.0 17.3 14.9
9. TRANSACTIONS WITH AFFILIATE Upon consummation of the Transaction, the Company entered into an advisory agreement with Key Equity Capital Corporation ("KECC"), a major shareholder, at an annual expense of $200 adjusted to $150 effective October 1, 1998. Effective June 30, 2000, Blue Point Capital Partners ("BPCP") succeeded KECC's interest in the advisory agreement. In connection with the Transaction, the Company advanced $656 to Holding. The advances were made to Holding to permit Holding to satisfy certain obligations it entered into in connection with the Transactions. ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE. Not applicable. 35 36 PART III. ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT. The following table sets forth the names and ages of the Company's executive officers (the "Executive Management") and the directors of the Company and Holding (the "Directors"). The officers and directors of the Company and Holding are identical and management believes that they will continue to be identical for the foreseeable future.
NAME AGE POSITION ---- --- -------- Mark D. Christman 48 Director, President and Chief Executive Officer John S. Baxter 60 Senior Vice President, Marketing and Sales Kenneth H. Wetmore 53 Vice President, General Counsel and Secretary Ronald A. McMaster, Ph.D. 61 Vice President, Corporate Development Diane S. Tymiak 43 Vice President, Treasurer and Chief Financial Officer Larry E. Elliott 51 Vice President, Manufacturing James P. Schnabel 40 Vice President, Development and Engineering David P. Given 46 Director John A. LeMay 34 Director James M. Papada, III 52 Director Edmund S. Wright 57 Director
Mark D. Christman has been President and Chief Operating Officer of the Company since December 31, 1992. Mr. Christman joined the Company in 1976, and since that time has served in various capacities, including Vice President, Treasurer, Chief Financial Officer and Executive Vice President. Upon the consummation of the Transactions, Mr. Christman was elected Director, President and Chief Executive Officer. John S. Baxter has been Senior Vice President, Marketing and Sales, since 1992. Mr. Baxter joined the Company in 1981 and was Managing Director of Glasstech Ltd. from 1981 to 1992. Prior to joining the Company, Mr. Baxter was employed by Triplex Safety Glass, a subsidiary of Pilkington plc, for five years. From July 1997 to February 1998, Mr. Baxter was a Director. Kenneth H. Wetmore joined the Company in 1988 as General Counsel and was elected Secretary in 1989 and Vice President in 1991. Mr. Wetmore is also President of Stir-Melter, Inc. Prior to joining the Company, Mr. Wetmore was employed by Owens Corning Fiberglas Corp. for 19 years. Ronald A. McMaster, Ph.D. has been Vice President, Corporate Development since 1988. Dr. McMaster joined the Company in 1977 and has served in various capacities, including Vice President, Research and Development and Vice President, Advanced Engineering. Mr. McMaster and Mr. Christman are first cousins. Diane S. Tymiak has been Vice President, Treasurer and Chief Financial Officer since 1993. Ms. Tymiak joined the Company in 1980 and has served in various financial capacities since that time. Larry E. Elliott joined the Company in July 1996 as Vice President and currently serves as Vice President, Manufacturing. Prior to joining the Company, Mr. Elliott was employed by the glass division of Ford Motor Company for 25 years, most recently as Supervisor, Fabrication Facilities Engineering. 36 37 James P. Schnabel was elected Vice President in 1997 and currently serves as Vice President Development and Engineering. Mr. Schnabel joined the Company in 1984 and has served in various engineering capacities with the Company since that time. David P. Given became a Managing Partner of Blue Point Capital Partners, L.P. ("BPCP"), a venture capital firm, effective June 30, 2000. See "Certain Relationships and Certain Transactions." Prior to joining BPCP, Mr. Given had been President of KECC since 1995 and joined KECC as a Vice President in 1990. Mr. Given serves as a director of several privately held companies. Upon the consummation of the Transactions, Mr. Given began to serve as Director. John A. LeMay became a Principal with BPCP, effective June 30, 2000. Prior to joining BPCP, Mr. LeMay joined KECC as a Vice President in 1998. Prior to joining KECC, Mr. LeMay was employed by the Boston Consulting Group, Inc. and Salomon Brothers, Inc. Mr. LeMay became a Director in May 1999. James M. Papada is Chairman of the Board of Directors and CEO of Technitrol, Inc. (NYSE: TNL), a diversified manufacturer of components for electrical and electronic equipment. From 1978 to 1982 and from 1988 to 1999 Mr. Papada was a partner with the law firm of Stradley, Ronon, Stevens & Young, located in Philadelphia, Pennsylvania. From 1983 to 1988, Mr. Papada was Chief Operating Officer of Hordis Brothers, Inc., the largest independent glass processor/fabricator in the United States. Mr. Papada is also a director of Parra-Chem Southern, Inc. and CTA, Incorporated. Mr. Papada became a Director in February 1998. Edmund S. Wright has been a business consultant since 1995. Prior to that, Mr. Wright was President and CEO of North American Refractory Company from 1981 to 1994, Vice Chairman of NARCO, Canada, Inc. from 1989 to 1994, Chairman of ZIRCOA, Inc. from 1989 to 1994, President of Tri-Star Refractories, Inc. from 1990 to 1994 and Chairman of Dakota Catalyst Products, Inc. from 1995 to 1997. Mr. Wright is also a director of Fairmount Minerals, Inc., Unifrax Corporation, Stonebridge Industries, Inc. and STAM, Inc. Mr. Wright became a Director in February 1998. All Directors hold office until the next annual meeting of shareholders and until their successors have been elected and qualified. Executive Officers serve at the discretion of the Board. Compensation of Directors, not employed by the Company or affiliated with KECC or BPCP, is $20,000 per year. Under the Stockholders' Agreement (as defined herein), Messrs. Given and LeMay serve as directors as representatives of KECC, and Mr. Christman serves as a director by virtue of his position as President and Chief Executive Officer of the Company and Holding. 37 38 ITEM 11. EXECUTIVE COMPENSATION. The following table sets forth the compensation received by the Company's Chief Executive Officer and the four other highest paid executive officers (together with the Chief Executive Officer, the "Named Executive Officers") for services to the Company in fiscal years 2000, 1999 and 1998.
SUMMARY COMPENSATION TABLE ANNUAL ALL OTHER COMPENSATION COMPENSATION ----------------------- ------------ NAME AND PRINCIPAL POSITION FISCAL YEAR SALARY BONUS(a) (b) - --------------------------- ----------- ------ -------- --- Mark D. Christman 2000 $296,140 $ 228,000 $14,264 President and Chief Executive Officer.................... 1999 289,909 1,058,000 13,848 1998 309,634 970,000 13,348 John S. Baxter 2000 231,847 70,000 14,708 Senior Vice President, Marketing and Sales............... 1999 226,935 322,000 14,400 1998 233,254 296,000 13,900 Kenneth H. Wetmore 2000 201,002 40,000 14,162 Vice President, General Counsel and Secretary............ 1999 196,932 170,000 14,076 1998 200,080 136,000 13,481 Ronald A. McMaster 2000 184,004 15,000 15,098 Vice President, Corporate Development.................... 1999 180,160 72,000 14,400 1998 179,464 66,000 23,900 James P. Schnabel 2000 159,254 35,000 14,120 Vice President, Development.............................. 1999 146,574 148,000 13,632 1998 144,690 136,000 13,132
(a) Represent bonus amounts paid in the fiscal years listed but related to prior year performance. (b) Represents (i) a pension plan contribution equal to 5% of each Named Executive Officer's first $160,000 of compensation under the Company's pension plan and (ii) imputed income on life insurance provided by the Company. EMPLOYMENT AGREEMENTS AND ARRANGEMENTS Mr. Christman has entered into a five-year employment agreement with Holding and the Company pursuant to which Mr. Christman serves as the President and Chief Executive Officer of Holding and the Company (the "President"). Mr. Christman is paid a base salary subject to certain cost-of-living adjustments, and receives customary executive benefits. Additionally, pursuant to his agreement and the Stockholders Agreement (as defined herein), he is entitled to receive no less than 40% of all distributions from the Performance Bonus Pool (as defined herein), participate in the Restricted Stock Program (as defined herein), and participate in the Performance Share Program (as defined herein). See "Management Incentive Plans." The employment agreement also contains a noncompetition provision that prohibits Mr. Christman from competing or holding certain ownership interests in other businesses that compete against the Company for the later of five years after the initial date of the agreement or two years following the termination of Mr. Christman's employment (unless Mr. Christman is terminated without cause, in which case no restriction shall apply). The employment agreement is renewable by the Company for one-year successive terms upon 38 39 completion of the initial five-year term. 39 40 Each of the other members of Executive Management also entered into an employment agreement (each, an "Employment Agreement" and, collectively with the President's employment agreement, the "Employment Agreements") that is substantially similar to Mr. Christman's agreement, but is paid a base salary per year, subject to certain cost-of-living adjustments. MANAGEMENT INCENTIVE PLANS In connection with the Transactions, the Company and Holding have established (i) a performance bonus pool (the "Performance Bonus Pool"); (ii) a restricted stock plan (the "Restricted Stock Program"); and (iii) a performance share program (the "Performance Share Program"), all of which were designed to retain and reward members of Executive Management. No table describing options granted in the last fiscal year has been included, because neither the Company nor Holding has granted any options to Executive Management in the past fiscal year and no options to Executive Management are currently outstanding. Performance Bonus Pool. Each member of Executive Management is eligible to receive a distribution from the Performance Bonus Pool (based upon a calculated EBITDA as defined in the Employment Agreements). Amounts made available by the Company pursuant to the Performance Bonus Pool at the end of each fiscal year are based on the calculated EBITDA of the Company for such fiscal year or the average calculated EBITDA for all fiscal years, whichever is greater (as defined in the Employment Agreements). If calculated EBITDA (which for such purpose will be computed before deducting any fees payable to KECC or BPCP subsequent to June 30, 2000) is between $14.0 million and $15.0 million as of such fiscal year, then amounts available for distribution pursuant to the Performance Bonus Pool will generally be 5.0% of calculated EBITDA. If calculated EBITDA is more than $15.0 million but not over $16.0 million, then amounts available for distribution pursuant to the Performance Bonus Pool will generally be 7.5% of calculated EBITDA. If calculated EBITDA is more than $16.0 million, then amounts available for distribution pursuant to the Performance Bonus Pool will generally be 10.0% of calculated EBITDA. The Directors, at their discretion, but after consultation with the President, will distribute the Performance Bonus Pool among the members of Executive Management using its discretion; but Mr. Christman, under the terms of his employment agreement, is entitled to receive at least 40% of the Performance Bonus Pool. The Directors are required to distribute the entire amount of the Performance Bonus Pool among some or all members of Executive Management. Restricted Stock Program. Simultaneous with the consummation of the Transactions, Holding and the members of the Key Equity Group entered into a stockholders agreement (the "Stockholders Agreement"), pursuant to which Holding established the Restricted Stock Program. Under the terms of the Restricted Stock Program, members of Executive Management were granted, under their employment agreements, in the aggregate, 1,667 shares of restricted Class C Common Stock (as defined herein) of Holding. The restricted Class C Common Stock may not be sold or otherwise transferred while the restrictions are in effect and may be forfeited to the Company if the recipient leaves the Company before the restrictions lapse. The shares of Class C Common Stock are non-voting and the restrictions will generally lapse in equal amounts over a four-year period. However, all such restrictions will lapse upon a Change of Control (as defined in the Employment Agreements). Performance Share Program. The Performance Share Program was established under the Stockholders Agreement. Under the terms of the Performance Share Program, members of Executive Management purchased shares of Class D Common Stock of Holding (the "Class D Holders") by paying $0.01 in cash and paying for the balance by issuing to Holding promissory notes in consideration therefor and pledging such shares to Holding to secure such debt. Upon the occurrence of a Liquidity Event (as defined herein), a final determination of the number of shares of Class D Common Stock that will be retained by members of Executive Management will be made based upon the achievement by the Key Equity Group of certain goals relating to its return on the Equity Contribution, as adjusted to account for the value attributable 40 41 to the Warrants. "Liquidity Event" is defined in the Stockholders Agreement as the first to occur of (i) the sale of Holding and (ii) a public offering of any of Holding's securities (each, a "Liquidity Event"). The Company will have the right to repurchase shares of Class D Common Stock under certain circumstances upon a termination of employment. EMPLOYEES' PENSION PLAN AND EMPLOYEES' SAVINGS PLAN The Company's Employees' Pension Plan and Employees' Savings Plan cover substantially all of its employees. Under the Employees' Pension Plan, the Company may make annual contributions to the participants equal to 5% of each participant's compensation up to $160,000. For the fiscal years ended June 30, 1998, 1999 and 2000, the Company's expense under the Employees' Pension Plan approximated $639,000 $616,000 and $534,000, respectively. The Company does not match contributions made by employees under the Employees' Savings Plan, a 401(k) plan. 41 42 ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT. Holding owns 100% of the issued and outstanding common stock of the Company. As of September 15, 2000, the following entities or persons owned the outstanding Common Stock of Holding as set forth below.
CLASS A COMMON STOCK CLASS B COMMON STOCK CLASS C COMMON STOCK CLASS D COMMON STOCK ------------------------ --------------------- --------------------- --------------------- NUMBER OF PERCENT OF NUMBER OF PERCENT OF NUMBER OF PERCENT OF NUMBER OF PERCENT OF SHARES(a) OWNERSHIP(b) SHARES(c) OWNERSHIP SHARES OWNERSHIP SHARES OWNERSHIP --------- ------------ --------- ---------- --------- ---------- --------- ---------- Key Equity Capital Corporation 127 Public Square, 28th Floor Cleveland, Ohio 44114-1306 (d) 1,550 37.5% 8,405 100.0% -- -- -- -- Key Equity Partners 97 127 Public Square, 28th Floor Cleveland, Ohio 44114-1306 (e) -- -- -- -- 3,335 66.7% -- -- David Given (e) 127 Public Square, 28th Floor Cleveland, Ohio 44114-1306 -- -- -- -- 3,335 66.7% -- -- Executive Management (f) Mark D. Christman 1,010 24.4% -- -- 834 16.7% 4,000 40.0% John S. Baxter 175 4.2% -- -- 267 5.3% 1,800 18.0% Kenneth H. Wetmore 125 3.0% -- -- 133 2.7% 1,000 10.0% Ronald A. McMaster, Ph.D. 150 3.6% -- -- 67 1.3% 500 5.0% Diane S. Tymiak 90 2.2% -- -- 100 1.9% 700 7.0% Larry E. Elliot 35 0.9% -- -- 133 2.7% 1,000 10.0% James P. Schnabel 75 1.8% -- -- 133 2.7% 1,000 10.0% Key Equity Group (g) 3,210 77.6% 8,405 100.0% 5,002 100.0% 10,000 100.0% James M. Papada, III 25 0.6% -- -- -- -- -- -- Edmund S. Wright 25 0.6% -- -- -- -- -- -- All officers and directors as a group 3,260 78.8% 8,405 100.0% 5,002 100.0% 10,000 100.0%
(a) Does not include shares of Class A Common Stock issuable upon conversion of Class B Common Stock, or following the occurrence of a Conversion Event, Class C Common Stock. (b) Assumes 877.21 shares of Class A Common Stock issuable pursuant to the Warrants are outstanding. (c) Does not include shares of Class B Common Stock issuable upon conversion of Class A Common Stock. (d) KECC is a wholly owned subsidiary of Key Bank, N.A., which is a wholly owned subsidiary of KeyCorp, a bank holding corporation. (e) Mr. Given is a partner of KEP 97. Accordingly, Mr. Given may be deemed to beneficially own the shares owned by KEP 97. (f) Simultaneously with the consummation of Transaction, Executive Management purchased 1,660 shares of Class A Common Stock on the same terms and conditions as those shares of Class A Common Stock that are purchased by KECC. In addition, Executive Management received 1,667 shares of Class C Common Stock in connection with the Restricted Stock Plan and up to 10,000 shares of Class D Common Stock that may be earned under the Performance Share Program. (g) The Key Equity Group is comprised of Executive Management, KECC and KEP 97. 42 43 STOCKHOLDERS AGREEMENT Simultaneously with the consummation of the Transactions, members of the Key Equity Group and Holding entered into a Stockholders' Agreement (the "Stockholders Agreement") which, together with the Amended and Restated Certificate of Incorporation of Holding (the "Certificate of Incorporation"), governs the terms of the capital stock of Holding. Classes of Common Stock. The authorized shares of capital stock of Holding (the "Common Stock") consists of: (i) 18,072 authorized shares of Class A Voting Common Stock, $0.01 par value (the "Class A Common Stock"); (ii) 13,070 authorized shares of Class B Non-Voting Common Stock, $0.01 par value (the "Class B Common Stock"); (iii) 5,002 shares of Class C Stock Non-Voting Common Stock, $0.01 par value (the "Class C Common Stock"); and (iv) 10,000 shares of Class D Non-Voting Common Stock, $0.01 par value (the "Class D Common Stock"). The holders of Class A Common Stock have the right to vote on all matters to be voted on by the stockholders of Holding. At every meeting of stockholders of Holding, each holder of Class A Common Stock is entitled to one vote per share. Except as otherwise required by law, a holder of Class B Common Stock, Class C Common Stock or Class D Common Stock has no voting rights with respect to such Common Stock. Control. The Certificate of Incorporation requires Holding to obtain the approval by vote or written consent of 55% of the then outstanding shares of Class A Common Stock, in addition to any other vote required by law, in order to do any of the following: (i) redeem, purchase or otherwise acquire for value any shares of Common Stock or any other shares of its capital stock, except as specifically permitted in the Stockholders Agreement; (ii) authorize or issue, or obligate itself to authorize or issue, additional shares of Common Stock or any other shares of its capital stock except as contemplated in the Certificate of Incorporation or in the Stockholders Agreement; (iii) amend, alter or repeal the Certificate of Incorporation or the By-Laws of Holding (the "By-Laws"); (iv) declare or pay any dividends or make any distributions with respect to any of its capital stock; or (v) except as specifically permitted by the Stockholders Agreement, effect, or obligate itself to effect, any sale, lease, assignment, transfer or other conveyance of all or substantially all of the assets of Holding or any subsidiary thereof, or any consolidation or merger involving Holding or any subsidiary thereof, or any reclassification or other change of capital stock, or any recapitalization or reorganization or any dissolution, liquidation or winding up of Holding or any subsidiary thereof, except for the merger into Holding of, or the transfer of assets to Holding from, any wholly owned subsidiary. In addition, the Stockholders Agreement provides that Holding will not, and will not permit any of its subsidiaries (including the Company), to take any of the following actions without the written consent of KECC or Key Equity Partners, a general partnership comprised of certain affiliates of KECC ("KEP 97"): (i) acquire any assets (other than in the ordinary course of business), capital stock, or any other interest in another business or entity; (ii) sell, lease, transfer, mortgage, pledge, or encumber all or substantially all of its assets; (iii) dispose of any business entity or product line or any division or subsidiary; (iv) enter into any merger, consolidation, reorganization or recapitalization, or any agreement to do any of the foregoing or reclassify any of its equity securities; (v) issue any equity security, or issue any options, warrants, convertible securities, or other rights (contingent or otherwise) to acquire any equity securities, except for shares of Class A Common Stock issued pursuant to the Warrants and the issuance of stock to an employee of Holding or any of its subsidiaries in accordance with a stock purchase or award program plan or the conversion of stock as described in the Certificate of Incorporation; (vi) form or acquire any subsidiary except those now existing; (vii) except as otherwise contemplated by the Stockholders Agreement, declare or pay any dividends or distributions on the Common Stock or other equity securities or redeem or repurchase any Common Stock; (viii) grant its consent to a transfer of stock otherwise prohibited by the Stockholders Agreement; (ix) incur, assume or guaranty any indebtedness for borrowed money in excess of certain amounts in any fiscal year; (x) 43 44 make any loans or advances to any stockholders or any employees of Holding or any of its subsidiaries other than advances to employees in the ordinary course of business which do not exceed certain amounts per year; (xi) make capital expenditures in excess of certain amounts in any fiscal year; (xii) except as otherwise contemplated by the Stockholders Agreement, enter into any transaction with any stockholder or any affiliate of Holding or its subsidiaries or any stockholder that is on terms less favorable to Holding and its subsidiaries than could be obtained from unaffiliated third parties on an arm's-length basis; (xiii) amend its Certificate of Incorporation or By-Laws; or (xiv) enter into any agreement to do any of the foregoing. Conversion. Each holder of Class B Common Stock is entitled at any time and from time to time to convert any or all of the shares of that holder's Class B Common Stock into the same number of shares of Class A Common Stock as provided in the Certificate of Incorporation; each holder of Class A Common Stock is entitled at any time and from time to time to convert any or all of the shares of that holder's Class A Common Stock into the same number of shares of Class B Common Stock as provided in the Certificate of Incorporation; provided that in the case of a conversion from Class B Common Stock, which is non-voting, into Class A Common Stock, which is voting, the holder of shares to be converted would be permitted under applicable law to hold the total number of shares of Class A Common Stock which would be held after giving effect to the conversion. The conversion of the Class B Common Stock held by BPCP could result in a change of control of Holding and the Company, since Holding is the sole stockholder of the Company. Each holder of Class C Common Stock is entitled to convert any or all of the shares of that holder's Class C Common Stock into the same number of shares of Class A Common Stock only upon the occurrence of any public offering or public sale of securities of the Corporation (including a public offering registered under the Securities Act and a sale pursuant to Rule 144 of the Securities Act or any similar rule then in effect) (any such offering, a "Conversion Event"). In addition, each holder of Class C Common Stock is entitled to convert shares of Class C Common Stock if such holder reasonably believes that a Conversion Event will be consummated. The Company is obligated, upon written request of the holder of Class C Common Stock, to effect such conversion in a timely manner so as to enable each such holder to participate in such Conversion Event. If any shares of Class C Common Stock are converted into shares of Class A Common Stock in connection with a Conversion Event and such shares of Class A Common Stock are not actually distributed, disposed of or sold pursuant to such Conversion Event, such shares of Class A Common Stock will promptly be converted back into the same number of shares of Class C Common Stock that had been the subject of the request for conversion. Restrictions on Transfer. Generally, the shares of Common Stock are subject to certain restrictions on transfer contained in the Stockholders Agreement. The shares of Common Stock may be transferred among affiliates and immediate family members without restrictions as long as the recipient complies with the provisions of the Stockholders Agreement and the applicable rules and regulations of the Commission. In addition, Holding may repurchase shares of Common Stock from departing members of Executive Management. Preemptive Rights. The holders of Common Stock have a pro rata right to participate in all future offerings of shares of equity securities of Holding or any securities convertible into or exchangeable for or carrying rights or options to purchase any shares or any other equity securities of the Company. Certain Rights of KECC and KEP 97. KECC and KEP 97 have the right, in the future to exercise a right to require Holding to repurchase their shares of Common Stock any time after June 2004. In addition, KECC and KEP 97 also have certain demand registration rights pursuant to which members of Executive Management may also be able to participate. 44 45 ITEM 13. CERTAIN RELATIONSHIPS AND CERTAIN TRANSACTIONS. Upon consummation of the Transaction, the Company entered into an advisory agreement with KECC, pursuant to which KECC consults with the Directors and members of Executive Management on such general business and financial matters as may be requested by the Board of Directors, including: (i) corporate strategy; (ii) budgeting of future corporate investment; and (iii) acquisition and divestiture strategies. In exchange for such services, KECC received an annual fee of $200,000, payable quarterly in arrears. Effective October 1, 1998, this fee was adjusted to $150,000. Effective June 30, 2000, Messrs. Given and LeMay resigned their positions with KECC and their affiliates and became a Managing Partner and Principal of BPCP, respectively. In addition, effective June 30, 2000, an affiliate of BPCP and KECC entered into an Investment Management Agreement, pursuant to which the affiliate of BPCP agreed to manage KECC's existing investments, which includes its investment in Holding. As a result of entering into the Investment Management Agreement, the affiliate of BPCP effectively succeeded to KECC's interest in the fees payable under the advisor agreement. The Company has advanced to Holding the sum of $656,399. The advances have been made to Holding to permit Holding to satisfy certain obligations it entered into in connection with the Transactions, including, without limitation, obligations to loan funds to members of Executive Management to allow them to satisfy certain tax liabilities. The tax liabilities resulted from the members of Executive Management making certain elections under Section 83(b) of the Code with respect to the shares of Class C Common Stock. 45 46 PART IV. ITEM 14. EXHIBITS, FINANCIAL STATEMENTS SCHEDULES AND REPORTS ON FORM 8-K. (a) (1) Financial Statements: See Index to Consolidated Financial Statements on page 23 included herein. (a) (2) Financial Statement Schedule: Schedule II--Valuation and Qualifying Accounts on page S-1. All other schedules are omitted as the required information is not applicable or not present in amounts sufficient to require submission of the schedule, or because the information is presented in the consolidated financial statements or related notes. (a) (3) Exhibits: 2.1(a) Agreement and Plan of Merger 2.2(a) Amendment to Agreement and Plan of Merger 3.1(a) Restated Certificate of Incorporation of the Registrant 3.2(a) By-laws of the Registrant 4.1(a) Indenture (including form of Note) 4.2(a) First Supplemental Indenture 10.1(a) Financing and Security Agreement between Bank of America, N.A., (f/k/a NationsBank, N.A.) and the Registrant 10.1.1(b) Second Amendment to Financing and Security Agreement between Bank of America, N.A., (f/k/a NationsBank, N.A.) and the Registrant 10.1.2(c) Third Amendment to Financing and Security Agreement between Bank of America, N.A., (f/k/a NationsBank, N.A.) and the Registrant 10.2(a) Plant and Office Lease 10.3(a) Warehouse Lease 10.4(a) Advisory Agreement between the Registrant and Key Equity Capital Corporation 10.5(a) Form of Exchange Agent Agreement between United States Trust Company of New York and the Registrant 10.6(a) Employment Agreement among Glasstech Holding Co., the Registrant and John S. Baxter 10.7(a) Employment Agreement among Glasstech Holding Co., the Registrant and Mark D. Christman 10.8(a) Employment Agreement among Glasstech Holding Co., the Registrant and Larry E. Elliott 10.9(a) Employment Agreement among Glasstech Holding Co., the Registrant and Ronald A. McMaster 10.10(a) Employment Agreement among Glasstech Holding Co., the Registrant and James P. Schnabel, Jr. 10.11(a) Employment Agreement among Glasstech Holding Co., the Registrant and Diane S. Tymiak 10.12(a) Employment Agreement among Glasstech Holding Co., the Registrant and Kenneth H. Wetmore 10.13(a) Securities Purchase Agreement between the Registrant, as successor to Glasstech Sub Co., and CIBC Wood Gundy Securities Corp. 10.14(a) Registration Rights Agreement between the Registrant, as successor to Glasstech Sub Co., and CIBC Wood Gundy Securities Corp. 21.1(a) List of Subsidiaries. 27.1(d) Financial Data Schedule (a)Incorporated by reference from the Company's Registration Statement on Form S-4 (Registration No. 333-34391) (the "Form S-4") filed on August 26, 1997. Each of the above exhibits has the same exhibit number in the Form S-4. (b)Incorporated by reference from the Company's Quarterly Report on Form 10-Q filed on February 11, 1999. (c)Incorporated by reference from the Company's Annual Report on Form 10-K filed on September 23, 1999. (d) Filed herewith. (b) Reports on Form 8-K: No reports have been filed during the last quarter of the fiscal year covered by this report on Form 10-K. 46 47 47 48 SIGNATURES PURSUANT TO THE REQUIREMENTS OF SECTION 13 OR 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934, THE REGISTRANT HAS DULY CAUSED THIS REPORT TO BE SIGNED ON ITS BEHALF BY THE UNDERSIGNED THEREUNTO DULY AUTHORIZED.
GLASSTECH, INC. Date: September 26, 2000 /s/ Mark D. Christman ------------------------------------------------------------ MARK D. CHRISTMAN President and Chief Executive Officer PURSUANT TO THE REQUIREMENTS OF SECURITIES EXCHANGE ACT OF 1934, THIS REPORT HAS BEEN SIGNED BELOW BY THE FOLLOWING PERSONS ON BEHALF OF THE REGISTRANT AND IN THE CAPACITIES AND ON THE DATE INDICATED. Date: September 26, 2000 /s/ Mark D. Christman ------------------------------------------------------------ MARK D. CHRISTMAN Director, President and Chief Executive Officer (Principal Executive Officer) Date: September 26, 2000 /s/ Diane S. Tymiak ------------------------------------------------------------ DIANE S. TYMIAK Vice President, Treasurer and Chief Financial Officer (Principal Financial and Accounting Officer) Date: September 26, 2000 /s/ David P. Given ------------------------------------------------------------ DAVID P. GIVEN Director Date: September 26, 2000 /s/ John LeMay ------------------------------------------------------------ JOHN LEMAY Director Date: September 26, 2000 /s/ James M. Papada, III ------------------------------------------------------------ JAMES M. PAPADA, III Director Date: September 26, 2000 /s/ Edmund S. Wright ------------------------------------------------------------ EDMUND S. WRIGHT Director
48 49 GLASSTECH, INC. SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS
ADDITIONS CHARGED BALANCE BALANCE AT TO AMOUNT AT BEGINNING COSTS AND CHARGED END OF DESCRIPTION OF PERIOD EXPENSES OFF PERIOD ----------- ---------- ---------- ------- ------ Year ended June 30, 2000: Allowance for doubtful accounts $ 40 $ -- $ -- $ 40 ====== ====== ====== ======== Accrued contract costs $ 795 $1,963 $1,884 $ 874 ====== ====== ====== ======== Year ended June 30, 1999: Allowance for doubtful accounts $ 40 $ -- $ -- $ 40 ====== ====== ====== ======== Accrued contract costs $2,382 $1,694 $3,281 $ 795 ====== ====== ====== ======== Year ended June 30, 1998: Allowance for doubtful accounts $ 141 $ (101) $ -- $ 40 ====== ====== ====== ======== Accrued contract costs $3,780 $1,717 $3,115 $ 2,382 ====== ====== ====== ========
S-1 50 EXHIBIT INDEX 2.1(a) Agreement and Plan of Merger 2.2(a) Amendment to Agreement and Plan of Merger 3.1(a) Restated Certificate of Incorporation of the Registrant 3.2(a) By-laws of the Registrant 4.1(a) Indenture (including form of Note) 4.2(a) First Supplemental Indenture 10.1(a) Financing and Security Agreement between Bank of America, N.A., (f/k/a NationsBank, N.A.) and the Registrant 10.1.1(b) Second Amendment to Financing and Security Agreement between Bank of America, N.A., (f/k/a NationsBank, N.A.) and the Registrant 10.1.2(c) Third Amendment to Financing and Security Agreement between Bank of America, N.A., (f/k/a NationsBank, N.A.) and the Registrant 10.2(a) Plant and Office Lease 10.3(a) Warehouse Lease 10.4(a) Advisory Agreement between the Registrant and Key Equity Capital Corporation 10.5(a) Form of Exchange Agent Agreement between United States Trust Company of New York and the Registrant 10.6(a) Employment Agreement among Glasstech Holding Co., the Registrant and John S. Baxter 10.7(a) Employment Agreement among Glasstech Holding Co., the Registrant and Mark D. Christman 10.8(a) Employment Agreement among Glasstech Holding Co., the Registrant and Larry E. Elliott 10.9(a) Employment Agreement among Glasstech Holding Co., the Registrant and Ronald A. McMaster 10.10(a) Employment Agreement among Glasstech Holding Co., the Registrant and James P. Schnabel, Jr. 10.11(a) Employment Agreement among Glasstech Holding Co., the Registrant and Diane S. Tymiak 10.12(a) Employment Agreement among Glasstech Holding Co., the Registrant and Kenneth H. Wetmore 10.13(a) Securities Purchase Agreement between the Registrant, as successor to Glasstech Sub Co., and CIBC Wood Gundy Securities Corp. 10.14(a) Registration Rights Agreement between the Registrant, as successor to Glasstech Sub Co., and CIBC Wood Gundy Securities Corp. 21.1(a) List of Subsidiaries. 27.1(d) Financial Data Schedule (a) Incorporated by reference from the Company's Registration Statement on Form S-4 (Registration No. 333-34391) (the "Form S-4") filed on August 26, 1997. Each of the above exhibits has the same exhibit number in the Form S-4. (b) Incorporated by reference from the Company's Quarterly Report on Form 10-Q filed on February 11, 1999. (c) Incorporated by reference from the Company's Annual Report on Form 10-K filed on September 23, 1999. (d) Filed herewith. E-1 EX-27 2 l84085aex27.txt EXHIBIT 27
5 1,000 YEAR JUN-30-2000 JUL-01-1999 JUN-30-2000 5,668 0 8,117 (40) 2,362 16,386 9,869 (4,219) 81,111 12,618 69,572 0 0 0 (1,535) 81,111 47,022 47,022 29,411 29,411 15,502 0 9,668 (7,298) 0 (7,298) 0 0 0 (7,298) 0 0
-----END PRIVACY-ENHANCED MESSAGE-----