-----BEGIN PRIVACY-ENHANCED MESSAGE-----
Proc-Type: 2001,MIC-CLEAR
Originator-Name: webmaster@www.sec.gov
Originator-Key-Asymmetric:
MFgwCgYEVQgBAQICAf8DSgAwRwJAW2sNKK9AVtBzYZmr6aGjlWyK3XmZv3dTINen
TWSM7vrzLADbmYQaionwg5sDW3P6oaM5D3tdezXMm7z1T+B+twIDAQAB
MIC-Info: RSA-MD5,RSA,
Kqqo/mcKePJo+iRs3NT8yw7PGdYNhs0UVUJMEw1wyIgLfS0+nHkt0TV3T26y6lWH
dcYHfQKWzVrc21KFR5V8iQ==
For the month of ______February_______, 2005____ _____________50 Casmir Court, Concord, Ontario, Canada L4K 4J5_____________FORM 6-K
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549Report of Foreign Private Issuer
Pursuant to Rule 13a-16 or 15d-16 of the Securities Exchange Act of 1934
Commission File Number _______________000-17946____________________
_________________DECOMA INTERNATIONAL INC._____________________
(Translation of registrant's name into English)
(Address of principal executive offices)
Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1): ____
|
Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7): ____
|
Indicate by check mark whether by furnishing the information contained in this Form, the registrant is also thereby furnishing the information to the Commission pursuant to Rule 12g3-2(b) under the Securities Exchange Act of 1934.
Yes ..... No ..X...
If "Yes" is marked, indicate below the file number assigned to the registrant in connection with Rule 12g3-2(b): 82- ________
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
DECOMA INTERNATIONAL INC. |
|
Date__February 28, 2005__ |
By: ___ /s/ R. David Benson ____________ |
EXHIBITS
Exhibit 99 |
Press release issued February 28, 2005, respecting the joint announcement by the Registrant and Magna International Inc. of the Registrant's shareholders' approval of the privatization of the Registrant. |
MAGNA INTERNATIONAL INC. |
|
|
JOINT PRESS RELEASE
DECOMA SHAREHOLDERS APPROVE PRIVATIZATION
Concord, Ontario, February 28, 2005 . . . Magna International Inc. (TSX:MG.SV.A, MG.MV.B; NYSE:MGA) ("Magna") and Decoma International Inc. (TSX:DEC.SV.A; NASDAQ:DECA) ("Decoma") today jointly announced that Decoma's shareholders have approved the previously announced plan of arrangement under Ontario law, by which Magna will acquire all of the outstanding Class A Subordinate Voting Shares of Decoma not owned by Magna. The arrangement was approved by over 99% of the votes cast by holders of Decoma Class A Subordinate Voting Shares, voting separately as a class. The arrangement was also approved by over 95% of the votes cast by the "minority" holders of Decoma Class A Subordinate Voting Shares. Votes cast by Magna, and parties related to Magna, were excluded for the purposes of the "majority of the minority" approval requirement. The privatization transaction is expected to become effective on March 6, 2005, subject to obtaining final court approval.
Decoma designs, engineers and manufactures automotive exterior components and systems which include fascias (bumpers), front and rear end modules, liftgates and running boards, plastic body panels, exterior trim components, sealing and greenhouse systems and lighting components for cars and light trucks (including sport utility vehicles and mini-vans). Decoma has approximately 16,000 employees in 54 manufacturing, engineering and product development facilities in Canada, the United States, Mexico, Germany, Belgium, England, France, Austria, Poland, the Czech Republic and Japan.
Magna, the most diversified automotive supplier in the world, designs, develops and manufactures automotive systems, assemblies, modules and components, and engineers and assembles complete vehicles, primarily for sale to original equipment manufacturers of cars and light trucks in North America, Europe, Mexico, South America and Asia. Magna's products include: automotive interior and closure components, systems and modules through Intier Automotive Inc.; metal body systems, components, assemblies and modules through Cosma International; exterior and interior mirror and engineered glass systems through Magna Donnelly; fascias, front and rear end modules, plastic body panels, exterior trim components and systems, greenhouse and sealing systems and lighting components through Decoma International Inc.; various engine, transmission and fueling systems and components through Tesma International Inc., a variety of drivetrain components through Magna Drivetrain; and complete vehicle engineering and assembly throu
gh Magna Steyr. Magna has approximately 81,000 employees in 219 manufacturing operations and 49 product development and engineering centres in 22 countries.
For further information about this press release, please contact Vincent J. Galifi, Executive Vice-President and Chief Financial Officer of Magna at (905) 726-7100, and S. Randall Smallbone, Executive Vice-President, Finance and Chief Financial Officer of Decoma at (905) 669-2888.
For further information about Magna, please visit the Company's website at www.magna.com. For further information about Decoma, please visit the Company's website at www.decoma.com.
(:&AI.3DZ&AH:ZNKKN[N\G)R=;6UN3DY/'Q\?__
M_P``````````````````````````````````````````````````````````
M`````````````````````"'Y!`D(`-<`+`````"4`I<```C^`*\)'$BPH,
M"!,J7)C0TR5($"-"]`2-H<6+-JW,BQH\>/($.*'$FRI,F3*%.J7,FRI