e10vq

-----BEGIN PRIVACY-ENHANCED MESSAGE----- Proc-Type: 2001,MIC-CLEAR Originator-Name: webmaster@www.sec.gov Originator-Key-Asymmetric: MFgwCgYEVQgBAQICAf8DSgAwRwJAW2sNKK9AVtBzYZmr6aGjlWyK3XmZv3dTINen TWSM7vrzLADbmYQaionwg5sDW3P6oaM5D3tdezXMm7z1T+B+twIDAQAB MIC-Info: RSA-MD5,RSA, MmoNRGGZ3C96xQHr1ue0xB2k3tgZeioVB5Hny8LEj3MO3jbz/eIQmLZqyKipXUlY li6qmtOIRSc6zSW3K1eQ0A== 0000950134-05-021038.txt : 20051109 0000950134-05-021038.hdr.sgml : 20051109 20051109154837 ACCESSION NUMBER: 0000950134-05-021038 CONFORMED SUBMISSION TYPE: 10-Q PUBLIC DOCUMENT COUNT: 6 CONFORMED PERIOD OF REPORT: 20050930 FILED AS OF DATE: 20051109 DATE AS OF CHANGE: 20051109 FILER: COMPANY DATA: COMPANY CONFORMED NAME: LASERSCOPE CENTRAL INDEX KEY: 0000851737 STANDARD INDUSTRIAL CLASSIFICATION: ELECTROMEDICAL & ELECTROTHERAPEUTIC APPARATUS [3845] IRS NUMBER: 770049527 STATE OF INCORPORATION: CA FISCAL YEAR END: 1231 FILING VALUES: FORM TYPE: 10-Q SEC ACT: 1934 Act SEC FILE NUMBER: 000-18053 FILM NUMBER: 051189966 BUSINESS ADDRESS: STREET 1: 3052 ORCHARD DR CITY: SAN JOSE STATE: CA ZIP: 95134 BUSINESS PHONE: 4089430636 10-Q 1 f14264e10vq.htm FORM 10-Q e10vq

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)


þ		Quarterly report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the quarterly period ended September 30, 2005


o		Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the transition period from to

Commission file number 0-18053

LASERSCOPE

(Exact name of Registrant as Specified in Its Charter)


CALIFORNIA		77-0049527
(State or Other Jurisdiction		(I.R.S. Employer Identification No.)
of Incorporation or Organization)

3070 ORCHARD DRIVE, SAN JOSE, CALIFORNIA 95134-2011
(Address of Principal Executive Offices)

Registrant’s Telephone Number, Including Area Code: (408) 943-0636

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes þ No o

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act). Yes þ No o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ

The number of shares of Registrant’s common stock issued and outstanding as of October 31, 2005 was 22,264,131.

TABLE OF CONTENTS


	Page
PART I. FINANCIAL INFORMATION
Item 1. Financial Statements (unaudited)
Condensed Consolidated Balance Sheets		3
Condensed Consolidated Statements of Income		4
Condensed Consolidated Statements of Cash Flows		5
Notes to Condensed Consolidated Financial Statements		6
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Income		11
Results of Operations		13
Liquidity and Capital Resources		15
Risk Factors		18
Item 3. Quantitative and Qualitative Disclosures About Market Risk		29
Item 4. Controls and Procedures		30
PART II. OTHER INFORMATION
Item 5. Other Information		31
Item 6. Exhibits		31
SIGNATURES		32
EXHIBIT 10.1
EXHIBIT 31.1
EXHIBIT 31.2
EXHIBIT 32.1
EXHIBIT 32.2

PART I. FINANCIAL INFORMATION.

Item 1. Financial Statements.

Laserscope

Condensed Consolidated Balance Sheets
(in thousands)
(unaudited)


	September 30,			December 31,
	2005			2004
Assets
Current assets:
Cash and cash equivalents	$	29,083		$	15,954
Accounts receivable, net of allowance for doubtful accounts of $157 and $104, respectively		22,403			20,342
Inventories, net		26,731			19,446
Deferred tax assets		15,006			—
Other current assets		1,902			1,471

Total current assets		95,125			57,213
Property and equipment, net		6,321			3,457
Goodwill		655			655
Other assets		662			264

Total assets	$	102,763		$	61,589

Liabilities and Shareholders’ Equity
Current liabilities:
Accounts payable	$	7,552		$	2,389
Accrued compensation		3,974			4,365
Warranty		2,979			2,536
Other accrued liabilities		5,603			5,761
Deferred revenue		4,696			3,575
Capital leases, current portion		20			21

Total current liabilities		24,824			18,647

Long-term liabilities:
Obligations under capital leases		14			31

Total long-term liabilities		14			31

Contingencies (see note 7)
Shareholders’ equity:
Common stock		83,855			65,009
Accumulated deficit		(5,619	)		(22,263	)
Accumulated other comprehensive income (loss)		(311	)		165


Total shareholders’ equity		77,925			42,911


Total liabilities and shareholders’ equity	$	102,763		$	61,589

The accompanying notes are an integral part of these condensed consolidated interim financial statements.

Laserscope

Condensed Consolidated Statements of Income
(in thousands, except per share amounts)
(Unaudited)


	Three months ended						Nine months ended
	September 30,						September 30,
	2005			2004			2005		2004
Net revenues	$	30,428		$	24,156		$	92,123	$	64,340
Cost of sales		12,403			9,749			36,131		26,935

Gross margin		18,025			14,407			55,992		37,405


Operating expenses:
Research and development		2,123			1,143			5,446		3,727
Selling, general and administrative		10,533			8,763			32,100		23,834

Total operating expenses		12,656			9,906			37,546		27,561


Operating income		5,369			4,501			18,446		9,844

Interest income and other, net		92			(52	)		419		321


Income before income taxes		5,461			4,449			18,865		10,165

Provision for (benefit) from income taxes		(862	)		96			2,221		610


Net income	$	6,323		$	4,353		$	16,644	$	9,555


Net income per share
Basic	$	0.28		$	0.20		$	0.75	$	0.46

Diluted	$	0.28		$	0.19		$	0.73	$	0.42


Shares used for net income per share
Basic		22,196			21,364			22,101		20,875

Diluted		22,955			22,778			22,937		22,780

The accompanying notes are an integral part of these condensed consolidated interim financial statements.

Laserscope

Condensed Consolidated Statements of Cash Flows
(in thousands)
(Unaudited)


	Nine Months Ended
	September 30,
	2005			2004
Cash flows from operating activities:
Net income	$	16,644		$	9,555
Adjustments to reconcile net income to net cash provided by operating activities
Depreciation and amortization		1,066			681
Provision for doubtful accounts		53			(26	)
Provision for excess and obsolete inventory		130			286
Tax benefit from employee stock options		14,825			—
Changes in assets and liabilities:
Accounts receivable		(2,489	)		(6,362	)
Inventories		(7,664	)		(5,728	)
Deferred tax assets		(15,006	)		—
Prepayments and other current assets		(609	)		(44	)
Accounts payable		4,895			1,469
Accrued compensation		(357	)		1,893
Warranty		442			383
Deferred revenue		1,169			1,414
Other current liabilities		1,229			946
Tax payable		(749	)		452

Net cash provided by operating activities		13,579			4,919


Cash flows from investing activities:
Acquisition of property and equipment		(3,917	)		(2,131	)
Acquisition of intangibles and licenses		(433	)		—

Net cash used in investing activities		(4,350	)		(2,131	)


Cash flows from financing activities:
Payments on obligations under capital leases		(15	)		9
Proceeds from the sale of common stock under stock option plans		4,007			2,702
Proceeds from warrants exercised		15			—

Net cash provided by financing activities		4,007			2,711


Effect of exchange rate changes on cash and cash equivalents		(107	)		13
Net increase in cash and cash equivalents		13,129			5,512
Cash and cash equivalents, beginning of period		15,954			7,158

Cash and cash equivalents, end of period	$	29,083		$	12,670

The accompanying notes are an integral part of these condensed consolidated interim financial statements.

Laserscope

Notes to Unaudited Condensed Consolidated Financial Statements

1. Basis of presentation

The accompanying unaudited condensed consolidated financial statements include Laserscope and its wholly owned subsidiaries (the “Company,” “management,” “we,” “us,” “our”). All intercompany transactions and balances have been eliminated. While the financial information in this report is unaudited, in the opinion of management, all adjustments (which include only normal recurring adjustments) necessary to state fairly the financial position and results of operations as of and for the periods indicated have been recorded. We recommend that these consolidated financial statements be read in conjunction with the consolidated financial statements and notes for the year ended December 31, 2004 included in the Company’s annual report on Form 10-K for the year ended December 31, 2004. The December 31, 2004 balance sheet data has been derived from the audited financial statements at that date. The results of operations for the three and nine months period ended September 30, 2005 are not necessarily indicative of the results expected for the full year or any other interim period.

Certain prior period balances have been reclassified to conform to the current financial statement presentation.

2. Stock-Based Compensation

The Company accounts for stock-based compensation arrangements in accordance with the provisions of Accounting Principles Board (“APB”) Opinion No. 25, “Accounting for Stock Issued to Employees” and its interpretations, and complies with the disclosure provisions of Statement of Financial Accounting Standards (“SFAS”) No. 123, “Accounting for Stock-Based Compensation,” as amended by SFAS No. 148, “Accounting for Stock-Based Compensation – Transition and Disclosure Amendment of SFAS No, 123.” Under APB Opinion No. 25, compensation expense is based on the difference, if any, on the date of grant, between the fair value of the Company’s stock and the exercise price. SFAS No. 123 defines a “fair value” based method of accounting for an employee stock option or similar equity instrument. The Company accounts for equity instruments issued to non-employees in accordance with the provisions of SFAS No. 123 and EITF Issue No. 96-18, “Accounting for Equity Instruments That Are Issued to Other Than Employees for Acquiring, or in Conjunction with Selling, Goods and Services” (“EITF Issue No. 96-18”). Under SFAS No. 123 and EITF Issue No. 96-18, the fair value of options granted to non-employees is estimated using the Black-Scholes option pricing model and is periodically remeasured as the options vest.

Had compensation cost for stock-based employee compensation arrangements been determined based on the fair value at the date of the awards consistent with the provisions of SFAS No. 123, the impact on the Company’s net income would be as follows (in thousands, except per share amounts):


		Three Months Ended						Nine Months Ended
		September 30,						September 30,
		2005			2004			2005			2004
Net Income	As Reported	$	6,323		$	4,353		$	16,644		$	9,555
Deduct: Total stock-based employee compensation expense determined under fair value based method for all awards, net of related tax effects			(928	)		(437	)		(2,318	)		(1,461	)

Net Income	Pro Forma	$	5,395		$	3,916		$	14,326		$	8,094


Basic Earnings Per Share	As Reported	$	0.28		$	0.20		$	0.75		$	0.46
	Pro Forma		0.24			0.18			0.65			0.39
Diluted Earnings Per Share	As Reported	$	0.28		$	0.19		$	0.73		$	0.42
	Pro Forma		0.24			0.17			0.62			0.36

For purposes of computing pro forma net income, we estimate the fair value of each option grant and employee stock purchase plan purchase right on the date of grant using the Black-Scholes option pricing model. The assumptions used to value the option grants and purchase rights are stated as follows:


	Three Months Ended						Nine Months Ended
	September 30,						September 30,
	2005			2004			2005			2004
Expected life of options (in years)		4.30			4.45			4.27			4.42
Expected life of ESPP rights (in years)		0.50			0.50			0.50			0.50
Volatility for options		72	%		81	%		75	%		84	%
Volatility for ESPP rights		47	%		46	%		78	%		46	%
Risk free interest rate for options		4.12	%		3.36	%		3.90	%		3.21	%
Risk free interest rate for ESPP rights		3.53	%		1.70	%		2.68	%		1.00	%
Dividend yield		0.0	%		0.0	%		0.0	%		0.0	%

The weighted average fair value per share of options granted under our stock option plans during the three months ended September 30, 2005 and 2004, was $17.41 and $13.54, respectively. The weighted average fair value per share of options granted under our stock option plans during the nine months ended September 30, 2005 and 2004, was $18.83 and $14.96, respectively.

These pro forma amounts may not be representative of the effects on net income in future years following our adoption of Statement of Financial Accounting Standards No. 123(R), “Share Based Payment” (“SFAS No. 123(R)”) as options vest over several years and additional awards are generally made each year.

3. Inventories

Inventories were comprised of the following (in thousands):


	September 30,		December 31,
	2005		2004
Sub-assemblies and purchased parts	$	13,465	$	9,120
Work-in-process		7,155		6,330
Finished goods		6,111		3,996

	$	26,731	$	19,446

4. Warranty and Service Contracts

Warranty

We have a direct field service organization that provides service for our products. We generally provide a twelve month warranty on our laser systems. After the warranty period, maintenance and support is provided on a service contract basis or on an individual call basis. Our warranties and premium service contracts provide for a “99.0% Uptime Guarantee” on our laser systems. Under provisions of this guarantee, at the request of the customer, we extend the term of the related warranty or service contract if specified system uptime levels are not maintained. The number of warranties extended under this program have not been material.

The Company currently provides for the estimated cost to repair or replace products under warranty at the time of sale. The cost estimate is based on warranty costs experienced in the prior 12 months, and the outstanding warranty liability is revalued on a quarterly basis.

Changes in product warranty obligations for the periods ended September 30, 2005 and 2004 are as follows (in thousands):


	Nine months ended
	September 30,
	2005			2004
Balance at beginning of period	$	2,536		$	1,947
Add: Expense for products sold		2,776			2,186
Expense to extend pre-existing warranties		92			—
Less: Cost of warranty service provided		(2,425	)		(1,803	)

Balance at end of period	$	2,979		$	2,330

Service Contracts

Deferred service contract revenue is recognized on a pro rata basis over the period of the applicable service contract. Costs are recognized as incurred. Changes in service contract liability for the periods ended September 30, 2005 and 2004 are as follows (unaudited, in thousands):


	Nine months ended
	September 30,
	2005			2004
Balance at beginning of period	$	2,936		$	1,433
Add: Payments received		4,765			3,416
Costs incurred under extended service contracts		2,679			1,982
Less: Revenue recognized		(4,279	)		(2,828	)
Settlements made under extended service contracts during the period		(2,679	)		(1,982	)

Balance at end of period	$	3,422		$	2,021

5. Net income per share

Basic net income per share is computed by dividing net income by the weighted average number of common shares outstanding during the period. Diluted net income per share is computed by giving effect to all dilutive potential common shares, including options and warrants. A reconciliation of the numerator and denominator used in the calculation of historical basic and diluted net income per share follows (in thousands, except per share amounts):


	Three months ended				Nine months ended
	September 30,				September 30,
	2005		2004		2005		2004
Numerator:
Net income used in computing basic and diluted net income per share	$	6,323	$	4,353	$	16,644	$	9,555

Denominator:
Weighted average number of common shares outstanding used in computing basic net income per share		22,196		21,364		22,101		20,875
Add: Dilutive potential common shares used in computing dilutive net income per share		759		1,414		836		1,905

Total weighted average number of shares used in computing diluted net income per share		22,955		22,778		22,937		22,780


Net income per share
Basic	$	0.28	$	0.20	$	0.75	$	0.46
Diluted	$	0.28	$	0.19	$	0.73	$	0.42

Options to purchase 146,000 and 131,000 shares with a weighted average exercise price of $34.40 and $24.91 during the three month periods ended September 30, 2005 and 2004, respectively, were excluded from the computation of diluted net income per share because the options’ exercise prices were greater than the average market price of our common stock during these periods and would have been anti-dilutive.

Options to purchase 61,000 and 57,000 shares with a weighted average exercise price of $34.40 and $25.92 during the nine month periods ended September 30, 2005 and 2004, respectively, were excluded from the computation of diluted net income per share because the options’ exercise prices were greater than the average market price of our common stock during these periods and would have been anti-dilutive.

6. Comprehensive income

Total comprehensive income during the periods ended September 30, 2005 and 2004 consisted of ( in thousands):


	Three months ended					Nine months ended
	September 30,					September 30,
	2005			2004		2005			2004
Net income	$	6,323		$	4,353	$	16,644		$	9,555
Translation adjustments		(64	)		8		(476	)		51

Comprehensive income	$	6,259		$	4,361	$	16,168		$	9,606

7. Contingencies

During the quarter ended September 30, 2005, there were no material developments with respect to legal matters except as follows.

Palomar Medical Technologies, Inc. (“Palomar”) has informed Laserscope that it disputes the method used by us for calculating the royalty to be paid on the Lyra laser system pursuant to the Patent License Agreement between Laserscope and Palomar (the “License Agreement”). Palomar also disputes our application of the License Agreement to the Gemini laser system, including our calculation of royalties due on the Gemini laser system under the License Agreement. In the third quarter of 2005, Palomar exercised its right under the License Agreement to engage an independent auditor to conduct a review of our royalty calculations and payments under the License Agreement. The independent auditors have not yet issued a report of their findings. We believe that we have been correctly calculating and paying the royalties owed to Palomar under the License Agreement and intend to continue to negotiate with Palomar while vigorously defending our position. If our dispute with Palomar is resolved in a manner contrary to our position, we could be required to record additional expenses which could have a material adverse impact on our financial results.

On November 8, 2005, we received notice from a customer of our GreenLight products alleging that we have violated certain terms of a specific treatment parameters/outcomes program agreement with it. We are in the process of assessing the allegations contained in the November 8, 2005 notice and will determine an appropriate response in due course. If this matter is resolved in a manner unfavorable to the company, it could have a material adverse impact on our financial results.

We are involved in various legal proceedings and other disputes that arise in the normal course of business. These other matters include product liability actions, contract disputes and other matters. Based on currently available information, we believe we have meritorious defenses to these actions and that resolution of these cases is not likely to have a material adverse effect on our business, financial position, cash flows or future results of operations.

8. Indemnifications

In the ordinary course of business, we enter into contractual arrangements under which we may agree to indemnify the third party to such arrangement from any losses incurred relating to the services they perform on behalf of Laserscope or for losses arising from certain events as defined within the particular contract, which may include, for example, patents, litigation or claims relating to past performance. Such indemnification obligations may not be subject to maximum loss clauses. Historically, payments made related to these indemnifications have been immaterial.

We have entered into indemnification agreements with our directors and officers that may require us: to indemnify our directors and officers against liabilities that may arise by reason of their status or service as directors or officers, other than liabilities arising from willful misconduct of a culpable nature; to advance their expenses incurred as a result of any proceeding against them as to which they could be indemnified; and to make good faith determination whether or not it is practicable for us to obtain directors’ and officers’ insurance. Laserscope currently has directors’ and officers’ insurance.

9. Income Tax Provision

We determined in the third quarter of 2005 that it is more likely than not that we will have sufficient future taxable income to utilize our deferred tax assets and accordingly eliminated our valuation allowances against these deferred tax assets. For interim reporting the effect of a change in judgment about the realiziability of deferred tax assets related to future years’ income should be recognized as of the date of the change in circumstances and should not be allocated to subsequent interim periods by an adjustment of the estimated annual effective tax rate for the remainder of the year. This led to a tax benefit of approximately $0.9 million in the three months ended September 30, 2005. The valuation allowances we eliminated related mainly to net operating loss carryforwards arising from deductions taken on income tax returns in prior years for compensation arising from the exercise of stock options. This generated a $14.8 million increase to equity in the three months ended September 30, 2005.

Our effective income tax rate in the third quarter of 2005 was negative 16% as compared to positive 2% in the third quarter of 2004. For the nine months ended September 30, 2005 our effective income tax rate was 12% as compared to 6% for the nine months ended September 30, 2004. The income tax provision differed from a provision computed at the U.S. statutory rate as follows:


	Nine months
	ended
	September 30,
	2005
Federal statutory rate		35.0	%
State, net of federal benefit		5.4	%
R&D credits and export incentives		(3.4	)%
Other		1.8	%
Change in valuation allowance		(27.0	)%

Total provision for income taxes		(11.8	)%

10. Intangibles and Other Assets

In June 2005, we acquired certain intellectual property assets related to the Solis^TM intense pulsed light aesthetic treatment device, including among other things the rights to certain patent applications, copyrights, trademarks, designs, trade secrets and licenses to certain other intellectual property (collectively, the “Solis Assets”) from New Star Lasers, Inc., which had been the OEM manufacturer of the Solis product prior to such asset purchase. We acquired the Solis Assets for $250,000 in cash and the OEM agreement between Laserscope and New Star Lasers, Inc. was superseded by a supply agreement pursuant to which New Star Lasers, Inc. is to sell certain component parts of the Solis product to us.

11. Recent Accounting Pronouncements

In November 2004, the FASB issued SFAS No. 151, “Inventory Costs, an amendment of ARB No 43. Chapter 4.” SFAS No. 151 clarifies the accounting for abnormal amounts of idle facility expense, freight, handling costs and wasted material. SFAS No. 151 is effective for the inventory costs incurred during fiscal years beginning after June 15, 2005. We do not believe the adoption of SFAS No. 151 will have a material effect on our consolidated financial position, results of operations or cash flows.

In December 2004, the FASB issued SFAS No. 123(R). This standard requires expensing of stock options and other share-based payments and supersedes the FASB’s earlier rule (the original SFAS 123) that allowed companies to choose between expensing stock options or showing pro forma disclosure only. We currently show the pro forma disclosures in Note 2 to these condensed consolidated interim financial statements. In April 2005, the Securities and Exchange Commission (“SEC”) approved a new rule to delay the effective date of SFAS 123(R) to annual periods that commence after June 15, 2005. We will be required to implement the new pronouncement and begin recording share-based expense at the beginning of the first quarter of 2006. Although we have not yet determined whether the adoption of the SFAS 123(R) will result in amounts that are similar to the current pro forma disclosures under SFAS 123, we expect the adoption of SFAS 123(R) to have a significant adverse impact on our consolidated operating results.

In March 2005, the SEC issued Staff Accounting Bulletin (“SAB”) No. 107, “Share Based Payment.” SAB 107 provides guidance on the initial implementation of SFAS 123(R). In particular, the statement includes guidance related to share-based payment awards for non-employees, valuation methods and selecting underlying assumptions such as expected volatility and expected term. It also gives guidance on the classification of compensation expense associated with such awards and accounting for the income tax effects of those awards upon the adoption of SFAS 123(R). We are currently assessing the guidance provided in SAB 107 in connection with the implementation of
SFAS 123(R).

In May 2005, FASB issued SFAS No. 154, “Accounting Changes and Error Corrections—a replacement of APB Opinion No. 20 and FASB Statement No. 3”. SFAS No. 154 changes the requirements for the accounting for and reporting of a change in accounting principle, and applies to all voluntary changes in accounting principle. It also applies to changes required by an accounting pronouncement in the unusual instance that the pronouncement does not include specific transition provisions. This statement requires retrospective application to prior periods’ financial statements of changes in accounting principle, unless it is impracticable to determine either the period-specific effects or the cumulative effect of the change. SFAS No. 154 is effective for accounting changes made in fiscal years beginning after December 15, 2005. We do not expect that adoption of this statement will have a material impact on our results of operations or financial condition.

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

INTRODUCTORY STATEMENT

Some of the statements in this Quarterly Report on Form 10-Q, including but not limited to “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and elsewhere in this document are forward-looking statements within the meaning of the Private Securities Litigation Act of 1995. These statements relate to future events or our future financial performance and involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from those expressed or implied by any forward-looking statements. In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “could,” “would,” “should,” “expect,” “plan,” “anticipate,” “intend,” “believe,” “estimate,” “predict,” “potential” or “continue” or the negative of these terms or other comparable terminology. These statements are only predictions. Actual events or results may differ materially. We refer you to the factors described under the heading “Risk Factors” in this Quarterly Report on Form 10-Q as well as to our Annual Report on Form 10-K for the year ended December 31, 2004 under the heading “Risk Factors.” Readers are cautioned not to place undue reliance on forward-looking statements. Moreover, neither we nor any other person assumes responsibility for the accuracy and completeness of those statements. We are under no duty to publicly release any revision to the forward-looking statements after the date of this document.

Overview.

Laserscope is a leading provider of medical laser and other light-based systems for surgical and aesthetic applications. Founded in 1982, we are a pioneer developer of innovative technologies with over 8,000 lasers installed worldwide in doctors’ offices, out-patient surgical centers and hospitals. Our product portfolio consists of lasers including KTP/532, Nd: YAG, and ER: Yag and other light-based systems and related energy delivery devices for medical applications.

We primarily serve the needs of two medical specialties: urology and aesthetic surgery. Our GreenLight™ laser system, offers a treatment for a urological disorder called benign prostatic hyperplasia (“BPH”), an enlargement of the prostate gland experienced by most men after the age of fifty. For aesthetic applications, we offer a full line of products used to perform a wide variety of treatments including the removal of leg and facial veins, unwanted hair, pseudo-folliculitis and wrinkles.

In the United States, we distribute our urology products to hospitals, outpatient surgical centers and physician offices through our own direct sales force. Our urology customers also include various physician partnerships and certain medical technology rental companies that mobilize the GreenLight laser system in order to rent it to health care providers on a per use or shared use basis, increasing the availability of a single GreenLight laser for multiple sites. We distribute our aesthetic products through a combination of our direct sales force and our non-exclusive U.S. distribution partner Henry Schein, Inc. Until November 9, 2005, we also distributed our aesthetic products through the McKesson Corporation Medical Group (“McKesson”) pursuant to a distribution agreement, that was made non-exclusive in April 2005 and terminated effective as of November 9, 2005. On July 29, 2005, we entered into a non-exclusive distribution agreement with Henry Schein, Inc. (the “HSI Agreement”), pursuant to which Henry Schein, Inc., a distributor of healthcare products and services to office-based practitioners in the North American and European markets, will distribute our aesthetic product line to physicians and physician practices within the United States. We intend to distribute our aesthetic product line through Henry Schein, Inc. on a non-exclusive basis for the foreseeable future. The Henry Schein, Inc. distribution relationship has replaced the McKesson distribution relationship as our principal U.S. distribution network for our aesthetic product line. During 2004, sales to McKesson accounted for approximately 23% of our total revenues and at December 31, 2004, accounts receivable from McKesson accounted for approximately 25% of our total accounts receivable.

Sales of our aesthetic products through McKesson and Henry Schein, Inc., as a percentage of total revenues for the respective periods during 2005, were as follows:


	Three months ended
	March 31, 2005		June 30, 2005		September 30, 2005
McKesson Corp.		12%		7%		4%
Henry Schein, Inc.		—		—		2%

For both the periods ended March 31, 2005 and June 30, 2005, McKesson represented 11% of our total accounts receivable. As of September 30, 2005, neither McKesson or Henry Schein, Inc. accounted for greater than 10% of our total accounts receivable.

We anticipate that the percentage of aesthetic sales through Henry Schein, Inc. will increase in future periods. However, we are still

engaged in the transitional phase of our distribution relationship with Henry Schein, Inc which involves significant training and coordination activities which are necessary to achieve an effective distribution partnership. Although to date we have made substantial progress in effecting this transition, there can be no assurance that our new relationship with Henry Schein, Inc will generate revenues equal to or greater than those previously generated through our relationship with McKesson.

In the United Kingdom and France, we distribute our products to hospitals, outpatient surgical centers and physician offices through our own direct sales force. Elsewhere, we sell our products through regional distributor networks throughout Europe, the Middle East, Latin America, Asia and the Pacific Rim. Laserscope is both ISO 13485 and CE certified.

For the three and nine months period ended September 30, 2005, our revenues and net income increased compared to the corresponding periods in 2004 primarily as a result of continued growth in sales of our main urology products, the GreenLight laser system and fiber optic delivery devices. Our reported revenue for the quarter ended September 30, 2005 was $30.4 million, a 26% increase as compared to total revenues of $24.2 million in the same period in 2004. Our net income in the third quarter of 2005 was $6.3 million, or $0.28 per diluted share, an increase in net income of 45% when compared to $4.4 million, or $0.19 per diluted share, in the same period of 2004.

In the third quarter of 2005, we experienced a decline in total revenues of 10% from the second quarter of 2005. Revenue declined in both our aesthetic and urology products. We believe several factors contributed to this decline including: seasonal slow down in elective procedures during the summer months, the disruptive impact of hurricanes and subsequent relief efforts in large areas of the southern United States on both patients seeking treatment and the availability of facilities and physicians to perform the PVP procedure using the GreenLight laser system, the potential that Medicare reimbursement rates for the PVP procedure would be reduced substantially from the currently effective rate which caused some customers to delay or cancel purchases, a precipitous decline in revenues generated through McKesson during the transition to Henry Schein, Inc, and competitive product offerings. As many of these factors are non-recurring events, we expect total revenues in the fourth quarter of 2005 to grow over the third quarter. We expect total annual revenues in 2006 to grow in the range of 20%-25% from 2005. We expect revenue from our urology products, fueled by sales of the GreenLight products, will continue to grow at a faster rate than revenue from our aesthetic products in 2006.

Intense competition in the market for light-based cosmetic treatment devices, which is characterized by low barriers to entry and marginal technological differentiation among product offerings, continued to create price pressure on our aesthetic products. We will focus on the key features of our product offerings affecting the value proposition to the customer, in particular the speed and comfort of light-based aesthetic treatments, to address this challenge. There can be no assurance that our existing products and newly offered products will be competitive in an increasingly difficult market for light-based cosmetic treatment devices.

Sales of GreenLight delivery devices used for the Photoselective Vaporization of the Prostate (“PVP”) procedure grew in the nine month period ended September 30, 2005 both domestically and internationally over the same period of the prior year, and we expect continued growth in 2006. Our priority in the urology market is to establish the PVP procedure using the GreenLight laser system as the worldwide standard for treating BPH. Demonstrating and maintaining the clinical effectiveness and safety of the PVP procedure using our product is essential to achieving this goal. As a result, we continued to make significant investments in sales, marketing and professional education and training in the third quarter of 2005, and intend to continue to do so for the remainder of 2005. Our efforts to increase adoption of PVP using our product in the United States, Europe and the Asia-Pacific region will be especially important to our continued success. The international market for PVP, which we believe to be substantially larger than the U.S. market, offers great promise but also a greater variety of challenges and uncertainties than our domestic market, which are discussed in greater detail in the “Risk Factors” section. We expect sales of our urology products in international markets to grow at a rate as fast or faster than domestic sales of our urology products, although there can be no assurance that such growth will occur.

Obtaining satisfactory heath care reimbursement rates for the PVP procedure using the GreenLight laser system from government and private insurers continues to be a critical factor for our success in the United States and in international markets. Recently, the Centers for Medicare and Medicaid Services (“CMS”) published its final rule on the Outpatient Prospective Payment System (“OPPS”) for outpatient hospital facility reimbursement for 2006. Under the final rule, PVP will be moved into a standard clinical Ambulatory Payment Classification (“APC”) code beginning in 2006. This APC, number 0429, includes all prostate laser procedures described by CPT codes 52647 and 52648. The 2006 national reimbursement rate for APC 0429 is $2,504.23. This new rate represents a decrease of $1,250 from the temporary reimbursement amount of $3,750 per procedure currently in effect under the new technology APC code that became effective in April 2004, but higher than the approximately $1,850 per procedure paid prior to the assignment of the new technology APC code. The potential impact of the proposed reduction in Medicare reimbursement rates on PVP adoption in the U.S. is not certain at this time, although we believe that the new reimbursement rate of $2,500 for the PVP procedure may cause some customers who were considering our products not to purchase them.

We will continue to work diligently to obtain satisfactory health care reimbursement in our key domestic and international markets. Our sensitivity to public and private payer reimbursement rates makes us subject to a variety of risks and uncertainties, which are discussed in greater detail in the “Risk Factors” section.

Results of Operations.

The following discussion should be read in conjunction with the unaudited condensed consolidated financial statements and notes included in Part I — Item 1 of this Quarterly Report and the audited consolidated financial statements and notes contained in the Company’s Annual Report on Form 10-K for the year ended December 31, 2004 and the accompanying Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following table contains selected income statement information, which serves as the basis of the discussion of the Company’s results of operations for the three and nine months ended September 30, 2005 and 2004 (in thousands, except percentages):


	Three months ended													Nine months ended
	September 30, 2005					September 30, 2004					%			September 30, 2005					September 30, 2004					%
	Amount		%(a)			Amount		%(a)			Change			Amount		%(a)			Amount		%(a)			Change
Revenues from sales of:
Lasers & Instrumentation	$	14,767		49	%		14,638		61	%		1	%	$	44,919		49	%	$	39,600		62	%		13	%
Disposable supplies		13,450		44	%		7,587		31	%		77	%		40,879		44	%		19,277		30	%		112	%
Service		2,211		7	%		1,931		8	%		15	%		6,325		7	%		5,463		8	%		16	%

Total net revenues	$	30,428		100	%		24,156		100	%		26	%	$	92,123		100	%	$	64,340		100	%		43	%

Gross margin		18,025		59	%		14,407		60	%		25	%		55,992		61	%		37,405		58	%		50	%

Operating expenses:
Research & development		2,123		7	%		1,143		5	%		86	%		5,446		6	%		3,727		6	%		46	%
Selling, general & administration		10,533		35	%		8,763		36	%		20	%		32,100		35	%		23,834		37	%		35	%

Net income	$	6,323		21	%	$	4,353		18	%		45	%	$	16,644		18	%	$	9,555		15	%		74	%


(a)		expressed as a percentage of total net revenues.

Lasers and instrumentation

Revenues from the sales of lasers and instrumentation increased 1% and 13% during the three and nine month periods ended September 30, 2005 respectively compared to the same periods in 2004. The increase is due primarily to increased revenue from the sale of GreenLight laser systems offset by a reduction in aesthetic laser revenues. Due to increase in sales of our disposable GreenLight fiber optic delivery devices, revenues from the sale of lasers and instrumentation as a percentage of total revenue declined in the three and nine month periods ended September 30, 2005 compared to the same periods in 2004. We believe the increase in GreenLight laser revenue was driven by continued strong demand for these systems to treat BPH. Revenues from the sale of aesthetic lasers and instrumentation decreased moderately in the three and nine month periods ended September 30, 2005 compared to 2004. We believe the decrease in aesthetic laser revenues was due primarily to a precipitous decline in revenues generated through McKesson during the transition to Henry Schein, Inc.

Disposable Supplies

Revenues from the sales of disposable supplies increased 77% and 112% during the three and nine month periods ended September 30, 2005 over the corresponding periods in 2004. This increased revenue was driven primarily by an increase in shipments of GreenLight fiber optic delivery devices which totaled approximately 17,600 and 53,000 units in the third quarter and first nine months of 2005, up from approximately 10,000 and 24,900 units in the corresponding periods of 2004. We believe these increases were driven by the growing world wide body of clinical data that demonstrates the clinical efficacy, high safety profile, and cost effectiveness of the PVP procedure. We expect revenues from the sales of GreenLight fiber optic delivery devices to continue to increase worldwide.

Recently, the CMS published its final rule on the

OPPS for outpatient hospital facility reimbursement for 2006. Under the final rule, PVP will be moved into a standard clinical APC code beginning in 2006. This APC, number 0429, includes all prostate laser procedures described by CPT codes 52647 and 52648. The 2006 national reimbursement rate for APC 0429 is $2,504.23. This new rate represents a decrease of $1,250 from the temporary reimbursement amount of $3,750 per procedure currently in effect under the new technology APC code that became effective in April 2004, but higher than the approximately $1,850 per procedure paid prior to the assignment of the new technology APC code. The potential impact of the proposed reduction in Medicare reimbursement rates on PVP adoption in the U.S. is not certain at this time, although we believe that the new reimbursement rate of $2,500 for the PVP procedure may cause some customers who were considering our products, not to purchase them.

Service

Service revenues increased 15% and 16% during the three and nine month periods ended September 30, 2005 compared to the same periods in 2004. The increases were due primarily to a greater number of service contracts sold to service our growing installed base of lasers. We generally provide a twelve month warranty on our laser systems. After the warranty period, maintenance and support is provided on a service contract basis or on a time and material basis. We recognize revenues on service over the period of the service contract or when time and material services are performed. Increases in future service revenues depends on increases to the installed base of lasers, as well as the acceptance of our service contracts by our customers.

Gross margin

Gross margin as a percentage of revenues was relatively consistent during the third quarter of 2005 compared to the third quarter of 2004. International customers generated 29% of our revenues in the third quarter of 2005 as compared to 23% in the third quarter of 2004. Sales to international customers are generally at lower prices than in the United States as they are sold through distributors, resulting in lower gross profit margins. The increase in worldwide sales of disposable supplies at high margins was offset by the increased percentage of sales to international customers at lower profit margins. Gross margins as a percentage of revenue increased 3 percentage points during the nine month period ended September 30, 2005 over the corresponding period of 2004, primarily due to the increase in GreenLight fiber optic delivery device revenues which carry a higher gross profit margin than our lasers. Our gross profit margin will vary as our sales mix changes. Increases in sales of our GreenLight fiber optic delivery devices will generally raise our overall gross profit margin, whereas sales of products through distributors in international markets will tend to decrease our overall gross profit margin.

Research and development

Research and development expenses are the result of activities related to the development of new laser, instrumentation and delivery device products and the modification and enhancement of existing products. Research and development expenses increased 86% and 46% during the three and nine month periods ended September 30, 2005 compared to the same periods in 2004. As a percentage of total revenues these expenses increased marginally. We expect research and development (“R&D”) expenses to continue to increase in absolute dollars in the fourth quarter of 2005 and throughout 2006 as we pursue a variety of development projects.

Selling, general and administrative

Selling, general and administrative (“S,G&A”) expenses increased in absolute terms but marginally decreased as a percentage of revenues during the three and nine month periods ended September 30, 2005 compared to the same periods in 2004. The increases are due primarily to increased headcount costs and higher selling, marketing and clinical education expenses related to expanding the presence of the Company’s products in both the domestic and international markets, plus additional administrative support expenditures. We expect our S,G&A expenses to increase in the fourth quarter of 2005 and throughout 2006, but not exceed the rate of increase in our revenues.

Provision for Income Taxes

Our effective income tax rate in the third quarter of 2005 was negative 16% as compared to positive 2% in the third quarter of 2004. We determined in the third quarter of 2005 that it is more likely than not that we will have sufficient future taxable income to utilize our deferred tax assets and accordingly eliminated our valuation allowances against these deferred tax assets. For interim reporting the effect of a change in judgment about the realiziability of deferred tax assets related to future years’ income should be recognized as of the date of the change in circumstances and should not be allocated to subsequent interim periods by an adjustment of the estimated

annual effective tax rate for the remainder of the year. This led to a tax benefit of approximately $0.9 million in the three months ended September 30, 2005. The valuation allowances we eliminated related mainly to net operating loss carry forwards (“NOLs”) arising from deductions taken on income tax returns in prior years for compensation arising from the exercise of stock options. This generated a $14.8 million increase to equity in the three months ended September 30, 2005. Our effective income tax rate is expected to be positive 12% in the fourth quarter of 2005. The effective income tax rate for 2006 is anticipated to be in the range of 39% to 40% though our cash payments for income taxes will be reduced while we utilize our NOL carryforwards.

Recent Accounting Pronouncements

In December 2004, the FASB issued SFAS No. 123(R). This standard requires expensing of stock options and other share-based payments and supersedes the FASB’s earlier rule (the original SFAS 123) that allowed companies to choose between expensing stock options or showing pro forma disclosure only. We currently show the pro forma disclosures in Note 2 to these condensed consolidated interim financial statements. In April 2005, the SEC approved a new rule to delay the effective date of SFAS 123(R) to annual periods that commence after June 15, 2005. We will be required to implement the new pronouncement and begin recording share-based expense at the beginning of the first quarter of 2006. Although we have not yet determined whether the adoption of the SFAS 123(R) will result in amounts that are similar to the current pro forma disclosures under SFAS 123, we expect the adoption of SFAS 123(R) to have a significant adverse impact on our consolidated operating results.

Liquidity and Capital Resources.

The following table contains selected balance sheet information that serves as the basis of the discussion of the Company’s liquidity and capital resources at September 30, 2005 and for the nine months then ended (in thousands):


	September 30,			December 31,
	2005		2004
Cash and cash equivalents	$	29,083	$	15,954
Total assets	$	102,763	$	61,589
Total liabilities	$	24,838	$	18,678
Working capital	$	70,301	$	38,566

Our cash and cash equivalents consist principally of money market funds. Cash and cash equivalents were $29.1 million at September 30, 2005, an increase of $13.1 million compared with December 31, 2004.

Cash and cash equivalents were impacted principally by:

•

Positive cash flow from operating activities of $13.6 million;

	•		Proceeds from issuance of common stock related to employee participation in employee stock programs generating $4.0 million; and

	•		Capital expenditures of $3.9 million primarily for facility expansion and implementation of a new enterprise resource planning system.

Operating activities generated $13.6 million in cash in the nine months ended September 30, 2005 up from $4.9 million provided in the nine months ended September 30, 2004. In the first nine months of 2005 we:

	•		Generated $17.9 million of cash from net income plus non-cash related expenses;

	•		Used cash of $7.7 million to increase inventory levels, primarily for the GreenLight laser systems and delivery devices;

	•		Increased accounts payable by $4.9 million due to increased sales and marketing expenses; and

	•		Increased sales, which resulted in increases of $2.5 million and $1.2 million to accounts receivable and deferred revenue, respectively.

Net cash used in investing activities was $4.4 million in the nine months ended September 30, 2005 up from $2.1 million net cash used in the nine months ended September 30, 2004. The principal changes in cash used in investing activities in the first nine months of 2005 were due to acquisition of property and equipment. The remaining $0.4 million was used on the acquisition of intellectual property related to our new Solis aesthetic light-based treatment device.

Cash provided by financing activities was $4.0 million in the nine months ended September 30, 2005 up from $2.7 million cash provided in the nine months ended September 30, 2004. The principal factor that contributed to the cash provided by financing activities was cash received from the issuance of stock under employee stock programs.

We have in place an asset based line of credit which provides up to $5.0 million in borrowings. The line of credit expires September 2006. Credit is extended based on our eligible accounts receivable and inventory. At September 30, 2005, we had approximately $5.0 million in borrowing capacity and no borrowings outstanding. Our assets collateralize the line of credit which bears an interest rate equivalent to the bank’s prime rate plus 2.0%. Borrowings against the line of credit are paid down as the we collect our accounts receivable. Provisions of the bank loan agreement prohibit the payment of dividends on non-preferred stock, or the redemption, retirement, repurchase or other acquisition of our stock. The agreement further requires we maintain a minimum tangible net worth. As of September 30, 2005, we were in compliance with all covenants and had no outstanding borrowings under the line of credit facility.

We anticipate that future changes in cash and working capital will be dependent on a number of factors including:

•		our ability to effectively manage inventory and accounts receivable;

•		our ability to anticipate and adapt to the changes in our industry such as new and alternative medical procedures;

•		our level of profitability;

•		our determination to acquire or invest in products and businesses complementary to ours; and

•		the market price for our common stock as it affects the exercise of stock options and sale of common stock under stock plans.

We have historically financed acquisitions using our existing cash resources. While we believe our existing cash resources, including our bank line of credit, will be sufficient to fund our operating needs for the next twelve months, additional financing may be required for our currently envisioned long-term needs.

There can be no assurance that any additional financing will be available on terms acceptable to us, or at all. In addition, future equity financings could result in dilution to our shareholders, and future debt financings could result in certain financial and operational restrictions.

Off-Balance Sheet Arrangements.

We do not have any transactions with unconsolidated entities or financial partnerships, or other off-balance sheet arrangements.

Contractual Obligations.

On July 29, 2005, we entered into a non-exclusive distribution agreement with Henry Schein, Inc, pursuant to which Henry Schein, Inc., a provider of healthcare products and services to office-based practitioners in the North American and European markets, will distribute our aesthetic product line to physicians and physician practices within the United States.

We did not enter into any other additional material contractual obligations during the quarter ended September 30, 2005.

RISK FACTORS

In determining whether to invest in our common stock, you should carefully consider the information below in addition to all other information provided to you in this Report, including the information incorporated by reference in this Report. The statements under this caption are intended to serve as cautionary statements within the meaning of the Private Securities Litigation Reform Act of 1995. The following information is not intended to limit in any way the characterization of other statements or information under other captions as cautionary statements for such purpose.

Demand for our products in the United States and internationally is highly dependent on the ability of physicians, hospitals and other healthcare facilities to obtain satisfactory reimbursement rates for our products and services performed with our products from private and governmental third-party payers as well as direct payments from consumers. If satisfactory reimbursement rates are not maintained, demand for Laserscope products would decline and our business and financial results and cash flows would suffer.

A substantial portion of our laser sales are for aesthetic procedures that generally are not covered or reimbursed by government or commercial health insurance. The general absence of insurance coverage for these cosmetic procedures may restrict the development of this market as growth in procedures performed with our aesthetic products largely depends on consumers’ willingness to pay out-of-pocket for these treatments.

Market acceptance of our products internationally may depend in part upon the availability of reimbursement within prevailing healthcare payment systems. Reimbursement and healthcare payment systems in international markets vary significantly by country and include both government sponsored healthcare and private insurance. We may not obtain international reimbursement approvals in a timely manner, if at all. Our failure to receive international reimbursement approvals may negatively impact market acceptance of our products in the international markets in which those approvals are sought.

Increasing the use of our GreenLight laser system to perform the Photoselective Vaporization of the Prostate (“PVP”) procedure could be hindered by the ongoing efforts of major third-party payers for healthcare in the United States (such as Medicare, Medicaid, private healthcare insurance and managed care plans) and in our key international markets such as the European Union and the Asia-Pacific region to contain healthcare costs through stricter coverage criteria, price regulation, and lower payments for all items, including healthcare services, disposable medical products and medical capital equipment.

The current Facility Fee reimbursement for PVP in the United States has been reduced and could be reduced further, eliminated or utilized by a competitor.

Demand in the United States for our GreenLight laser system and disposable fiber optic delivery devices is highly dependent on the reimbursement for the PVP procedure when it is performed in the hospital outpatient setting. The rate set by Medicare is particularly influential on demand because Medicare is the largest single payer for PVP procedures and because many commercial payers use Medicare payments as a benchmark for their reimbursement rates. In November 2005, the 2006 national reimbursement rate for the PVP procedure was reduced to a new rate of $2504.23, which represents a decrease of $1,250 from the temporary reimbursement amount of $3,750 per procedure previously in effect since April 2004.

Medicare pays for hospital outpatient services on a rate-per-service basis that varies according to the ambulatory payment classification (“APC group”) to which the service is assigned. Services within a particular APC are supposed to be like in clinical character and resource utilization. Medicare uses the median cost to establish a payment amount for the services grouped with a single APC. The hospital outpatient payment rate includes the national payment amount that is made up of the Medicare payment and the beneficiary co-payment to the facility. Special payments are made under the hospital outpatient payment system for new technology items in one of two ways. The first is through a temporary add-on payment or “transitional pass-through payments.” This applies to certain drugs, devices and biologics. The second is through a temporary assignment to a New Technology APC. New services, not specific items, generally are handled through this method. Assignment to a New Technology APC is time limited. Medicare has the discretion to reassign a new technology service to a standard clinical APC when it feels it has sufficient data to understand the costs incurred by hospitals to provide the service.

The APC code applicable to the PVP procedure has varied since its launch. Laserscope submitted a New Technology Application to the Centers for Medicare and Medicaid Services (“CMS”) in September 2003, and was notified by Medicare several months afterwards that the application was approved. As a result, PVP was assigned temporary HCPCS code C9713 and was assigned to New Technology APC 1525, effective April 1, 2004. The national average payment rate for APC 1525 is $3,750.00. In July 2005, CMS

published its proposed rule regarding the 2006 Outpatient Prospective Payment System (“OPPS”) for outpatient hospital facility reimbursement. In this rule, CMS proposed to transfer PVP to a standard clinical Ambulatory Payment Classification (“APC”) code beginning in 2006. CMS recently finalized this proposal based on the agency’s belief that although it had less than a full-year of hospital claims data for PVP, it had a sufficient number of claims upon which to establish the median cost for performing the procedure billed under code C9713, and, therefore, a median cost could be established. As of January 1, 2006, PVP will be assigned to APC 0429, which includes all prostate laser procedures described by CPT codes 52647 and 52648. The 2006 national reimbursement rate for APC 0429 is $2,504.23. This new rate represents a decrease of $1,250 from the temporary reimbursement amount of $3,750 per procedure currently in effect under the new technology APC code that became effective in April 2004. Additionally, the new technology APC is not solely specific to our products and can be used by other technologies that meet the requirements of the APC coding guidelines. If a competitor were able to obtain reimbursement under the current APC code for the PVP procedure using its product, demand for our product could be reduced and our financial results could suffer.

Physician Fee Schedule reimbursement for PVP in the United States remains uncertain.

Demand in the U.S. for our GreenLight laser system and disposable fiber optic delivery devices is also highly dependent on the reimbursement rates physicians are paid to perform a PVP procedure. In particular, Medicare payments to physicians for the PVP procedure are of critical importance as Medicare is the largest single payer for PVP procedures and its reimbursement rates are used as a benchmark by many commercial payers.

Medicare pays for physician services under a uniform, national fee schedule based on relative value units (“RVUs”) that reflect the physician work and overhead costs associated with furnishing a particular item or service. Medicare assigns different RVUs for a single procedure depending on whether the service is performed in the physician’s office or a facility such as a hospital outpatient department or ambulatory surgery center. The non-facility payment rate is higher and is meant to reflect the fact that physicians incur greater overhead costs when they perform a procedure in their office.

Today, physicians generally use CPT code 52647 to describe to payers that they have performed a PVP procedure. Some physicians use CPT code 52648, another prostate laser procedure code. As of January 1, 2006, PVP will be assigned to APC 0429, which includes all prostate laser procedures described by CPT codes 52647 and 52648. Currently, physician office practice expense RVUs are not assigned to this code because historically the services described by APC 0429 were not performed in a physician office. Both the American Urological Association and Laserscope has requested that CMS assign temporary office practice expense RVUs to this code. If CMS does not take such action before the end of the year, beginning in January physicians will not receive reimbursement for their overhead costs for performing PVP in the office-setting, which could reduce the demand for the PVP procedure when performed in the physician’s office. Furthermore, there is the chance that at some time in the future PVP may be assigned a payment level that does not pay physicians at a rate they feel adequately reflects the time, effort and resource costs associated with the procedure. If physicians were paid at a rate for the PVP procedure they felt was inadequate, such underpayments would discourage physicians from performing the PVP procedure. Similarly, should Medicare underpay PVP relative to other procedures it will negatively influence physician adoption of the PVP procedure, which would reduce demand for our products and harm our financial performance. CMS reimbursement decisions regarding the physician Fee Schedule for PVP in any site of service remain uncertain and could result in maintenance of the current reimbursement structure or a decrease in reimbursement rates which could adversely affect PVP procedural volume and sales of our products.

PVP physician reimbursement is typically lower, on a per-procedure basis, compared to other BPH therapies.

The current national average rate of reimbursement paid by Medicare to physicians for performing the PVP procedure on a per-procedure basis is, in some cases, substantially lower than the reimbursement rate paid for performing certain other BPH therapies on a per-procedure basis. While we believe that this disparity results in physicians and hospitals not being reimbursed at a rate commensurate with the necessary resources and work required to do the PVP procedure in all sites of service currently being used by physicians, there can be no assurance that CMS will adjust reimbursement rates to address this disparity. Further, there can be no assurance that physician reimbursement for these other therapies will not be maintained at current levels or raised relative to reimbursement for PVP or that the physician reimbursement for PVP will be maintained at current levels or increased relative to other BPH therapies. The adoption rate of the PVP procedure in the United States is highly dependent upon hospital and physician economics. A substantial reduction in payments to facilities and/or a continuation of the disparity which currently exists between the physician reimbursement for certain other BPH therapies and that for PVP could cause a reduction in the adoption of PVP by hospitals and physicians, which would reduce demand for our products and harm our business.

If we are not able to protect our intellectual property adequately, we will lose a critical competitive advantage, which will

reduce our revenues, profits and cash flows.

Our patents, copyrights, trademarks, trade secrets and other intellectual property are critical to our success. We hold several patents issued in the United States, generally covering surgical laser systems, delivery devices, calibration inserts and the laser resonator. We have also licensed certain technologies from others.

We cannot assure that any patents or licenses that we hold or that may be issued as a result of our patent applications will provide any competitive advantages for our products. Nor can we assure that any of the patents that we now hold or may hold in the future will not be successfully challenged, invalidated or circumvented in the future. In addition, we cannot assure that competitors, many of which have substantial resources and have made substantial investments in competing technologies, will not seek to apply for and obtain patents that will prevent, limit or interfere with our ability to make, issue, use and sell our products.

Furthermore, we cannot be certain that the steps we have taken will prevent the misappropriation of our intellectual property, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States . We have not attempted to secure patent protection in foreign countries, and the laws of some foreign countries may not adequately protect our intellectual property as well as the laws of the United States. As we increase our international presence, we expect that it will become more difficult to monitor the development of competing technologies that may infringe on our rights as well as unauthorized use of our technologies.

We believe that we own or have the right to use the basic patents covering our products. However, the laser industry is characterized by a very large number of patents, some of which appear to overlap with other issued patents. As a result, there is a significant amount of uncertainty in the industry regarding patent protection and infringement. Because patent applications are maintained in secrecy in the United States until such patents are issued and are maintained in secrecy for a period of time outside the United States, we can conduct only limited searches to determine whether our technology infringes any patents or patent applications of others.

If we are unable to protect the integrity, safety and proper use of our disposable fiber optic delivery device used with the GreenLight laser system, it could result in negative patient outcomes and reduce our disposable delivery device recurring revenue stream.

Ensuring the integrity, safety and proper use of the GreenLight disposable fiber optical delivery device, also known as the ADDStat fiber optic delivery device, referred to elsewhere in this Report as the “delivery device”, used with the GreenLight laser system is crucial to achieving optimal patient outcomes from the PVP procedure. With this is mind, we manufacture the ADDStat fiber using high quality materials and exacting production standards. We inspect each unit carefully to check that it conforms to our specifications and use diligent efforts to ensure that the delivery device is used appropriately in connection with the GreenLight laser system. However, if a third party were to produce and distribute a counterfeit version of the GreenLight delivery device or an inferior substitute delivery device to our customers, use of inferior materials, poor design, shoddy construction or improper handling or use of such products could result in severe adverse patient events. While we are constantly making diligent efforts to promote positive clinical outcomes by protecting the safety, integrity and proper use of our products, particularly the GreenLight delivery device, one or more third party manufacturers may produce counterfeit or inferior quality delivery devices that our customers may, knowingly or unknowingly, purchase for use with the GreenLight laser system. In addition, it is possible that our customers may seek to violate our prohibition on reuse of delivery devices (or reuse inferior substitute delivery devices) on unwitting patients, reducing the efficacy of the procedure and exposing such patients to the risk of blood-borne pathogens. Use of such third party delivery devices or misuse of our genuine GreenLight delivery devices could result in adverse clinical outcomes, potentially reducing demand for PVP and decreasing demand for our products. Although we use a variety of methods to protect patients from inferior delivery devices and the reuse of our GreenLight delivery devices, including legal and regulatory safeguards, system enabling, patient education and safety packaging among other measures, there can be no assurance that such methods will be effective at avoiding the introduction of such counterfeit or substitute delivery devices into the market. Moreover, use of counterfeit or substitute disposable delivery devices for use with the GreenLight laser system or unauthorized reuse of delivery devices, would displace sales of our GreenLight disposable delivery devices reducing our recurring disposable delivery device revenue stream and harming our business.

We participate in competitive markets with companies that have significantly greater financial, technical, research and development, manufacturing and marketing resources and/or who produce standard, entrenched medical technologies.

We compete in the non-ophthalmic surgical segment of the worldwide medical laser market. In this market, lasers are used in hospital operating rooms, outpatient surgery centers and individual physician offices for a wide variety of procedures. This market is highly competitive. Our competitors are numerous and include some of the world’s largest organizations as well as smaller, highly

specialized firms. Our ability to compete effectively depends on such factors as:

•		market acceptance of our products;

•		product performance;

•		price;

•		satisfactory reimbursement of the PVP procedure by public and private third party payers;

•		customer support;

•		the success and timing of new product development; and

•		continued development of successful distribution channels.

Some of our current and prospective competitors have or may have significantly greater financial, technical, research and development, manufacturing and marketing resources than we have. To compete effectively, we will need to continue to expand our product offerings, periodically enhance our existing products and continue to enhance our distribution.

Certain surgical laser manufacturers have targeted their efforts on narrow segments of the market, such as angioplasty, orthopedics, and lithotripsy. Their products may compete for the same capital equipment and disposable device funds as our products, and accordingly, these manufacturers may be considered our competitors. Generally, surgical laser manufacturers such as Laserscope compete with standard surgical methods and other medical technologies and treatment modalities. Several of these manufacturers and their distribution partners offer products for the treatment of BPH using similar technologies to ours and engage in aggressive marketing campaigns and promotional efforts targeted at our products and customers. We cannot assure that we can compete effectively against such competitors. In addition, we cannot assure that these or other companies will not succeed in developing technologies, products or treatments that are more effective than ours or that would render our technology or products obsolete or non-competitive.

If we are unable to effectively manage our growth, our business may be harmed.

Our future success depends on our ability to successfully manage our growth. Our ability to manage our business successfully in a rapidly evolving and extremely competitive market requires an effective planning and management process. Our rates of growth in recent years have been high. Should our business continue to grow and demand for our products continue to increase at similar rates, it will increase the strain on our personnel in all aspects of our business.

Our historical growth and international expansion, have placed, and are expected to continue to place, a significant strain on our managerial, operational and financial resources as well as our financial and management controls, reporting systems and procedures. Although some new controls, systems and procedures have been implemented, our future growth, if any, will depend on our ability to continue to implement and improve operational, financial and management information and control systems on a timely basis, together with maintaining effective cost controls. Our inability to manage any future growth effectively would be harmful to our revenues and profitability.

Our dependence on certain single-source suppliers and certain other third parties, could adversely impact our ability to manufacture lasers.

Certain of the components used in our laser products, including certain optical components, are purchased from single sources. While we believe that most of these components are available from alternate sources, an interruption of these or other supplies could adversely affect our ability to manufacture lasers.

Problems associated with international business operations could affect our ability to sell our products.

As our international business has grown, we have become increasingly subject to the risks arising from the unique and potentially adverse factors in the countries in which we operate. Our international revenues were 29% of total revenues in the quarter ended September 30, 2005 and 23% in the quarter ended September 30, 2004. Our international sales are made through international distributors and wholly-owned subsidiaries with payments to us typically denominated in the local currencies of the United Kingdom

and France, and in United States Dollars in the rest of the world. We intend to continue our operations outside of the United States and potentially to enter additional international markets. We anticipate that sales to customers located outside North America will increase and will continue to represent a significant portion of our total revenues in future periods. These activities, require significant management attention and financial resources and further subject us to the risks of operating internationally. These risks include, but are not limited to:

•		changes in regulatory requirements;

•		delays resulting from difficulty in obtaining export licenses for certain technology;

•		customs, tariffs and other barriers and restrictions; and

•		the burdens of complying with a variety of foreign laws.

We are also subject to general geopolitical risks in connection with our international operations, such as:

•		differing economic conditions;

•		changes in political climate;

•		differing tax structures; and

•		changes in diplomatic and trade relationships and war.

In addition, fluctuations in currency exchange rates may negatively affect our ability to compete in terms of price against products denominated in local currencies.

Accordingly, if these risks actually materialize, our international operations may be adversely affected and sales to international customers, as well as those domestic customers that use foreign fabrication plants, may decrease

Our business has significant risks of product liability claims, which could drain our resources and exceed our limited insurance coverage.

Our business has significant risks of product liability claims. We have experienced product liability claims from time to time, which we believe are ordinary for our business. While we cannot predict or determine the outcome of the actions brought against us, we believe that these actions will not ultimately have a material adverse impact on Laserscope’s financial position, results of operations, and future cash flows.

At present, we maintain product liability insurance on a “claims made” basis with coverage commensurate with our business and product lines. We cannot assure that such insurance coverage will be available to us in the future at a reasonable cost, if at all, nor can we assure that other claims will not be brought against us in excess of our insurance coverage.

Our products are subject to government regulation, and we cannot assure that all necessary regulatory approvals, including approvals for new products or product improvements, will be granted on a timely basis, if at all, and that we won’t be subject to product recalls or warnings and other regulatory actions and penalties that could materially affect our operating results.

Government regulation in the United States and other countries is a significant factor in the development, manufacturing and marketing of many of our products.

Laserscope and its products are regulated in the United States by the Food and Drug Administration under the Federal Food, Drug and Cosmetic Act (the “FDC Act”) and the Radiation Control for Health and Safety Act. The FDC Act provides two basic review procedures for medical devices. Certain products qualify for a Section 510(k) (“510(k)”) procedure under which the manufacturer gives the FDA pre-market notification of the manufacturer’s intention to commence marketing the product. The manufacturer must, among other things, establish that the product to be marketed is “substantially equivalent” to a previously marketed product. In some cases, the manufacturer may be required to include clinical data gathered under an investigational device exemption (“IDE”) granted by the FDA allowing human clinical studies.

There can be no assurance that the FDA will grant marketing clearance for our future products on a timely basis, or at all.

If the product does not qualify for the 510(k) procedure, the manufacturer must file a pre-market approval application (“PMA”) based on testing intended to demonstrate that the product is both safe and effective. The PMA requires more extensive clinical testing than the 510(k) procedure and generally involves a significantly longer FDA review process. Approval of a PMA allowing commercial sale of a product requires pre-clinical laboratory and animal tests and human clinical studies conducted under an IDE establishing safety and effectiveness. Generally, because of the amount of information required, the 510(k) procedure takes less time than the PMA procedure.

In addition, we are subject to review, periodic inspection and marketing surveillance by the FDA to determine our compliance with regulatory requirements for any product for which we obtain marketing approval. Following approval, our manufacturing processes, subsequent clinical data and promotional activities are subject to ongoing regulatory obligations. If the FDA finds that we have failed to comply with these requirements or later discovers previously unknown problems with our products, including unanticipated adverse events of unanticipated severity or frequency, manufacture or manufacturing processes or failure to comply with regulatory requirements, it can institute a wide variety of enforcement actions, ranging from a public warning letter to more severe sanctions, including:

•		fines, injunctions and civil penalties;

•		recall or seizure of our products;

•		restrictions on our products or manufacturing processes, including operating restrictions, partial suspension or total shutdown of production;

•		denial of requests for 510(k) clearances or PMAs of product candidates;

•		withdrawal of 510(k) clearances or PMAs already granted;

•		disgorgement of profits; and

•		criminal prosecution.

Any of these enforcement actions could affect our ability to commercially distribute our products in the United States and may also harm our ability to conduct the clinical trials necessary to support the marketing, clearance or approval of these products and could materially and adversely affect our business.

To date, all of our products (except for the 600 Series Dye Module) have been marketed through the 510(k) procedure. Future products, however, may require clearance through the PMA procedure. There can be no assurance that such marketing clearances can be obtained on a timely basis, or at all. Delays in receiving such clearances could have a significant adverse impact on our ability to compete in our industry. The FDA may also require post-market testing and surveillance programs to monitor certain products.

Certain other countries require medical device manufacturers to obtain clearances for products prior to marketing the products in those countries. The requirements vary widely from country to country and are subject to change. Obtaining necessary regulatory approvals in key international markets and retaining such regulatory licenses is essential to international expansion of our business, which is an important strategic objective.

We are also required to register with the FDA and state agencies, such as the Food and Drug Branch of the California Department of Health Services (“CDHS”), as a medical device manufacturer. We are inspected routinely by these agencies to determine our compliance with the FDA’s current “Good Manufacturing Practice” regulations. Those regulations impose certain procedural and documentation requirements upon medical device manufacturers concerning manufacturing, testing and quality control activities. If these inspections determine violations of applicable regulations, the continued marketing of any products manufactured by us may be adversely affected.

In addition, our laser products are covered by a performance standard for laser products set forth in FDA regulations. The laser

performance standard imposes certain specific record-keeping, reporting, product testing, and product labeling requirements on laser manufacturers. These requirements also include affixing warning labels to laser systems, as well as incorporating certain safety features in the design of laser products.

Complying with applicable governmental regulations and obtaining necessary clearances or approvals can be time consuming and expensive. There can be no assurance that regulatory review will not involve delays or other actions adversely affecting the marketing and sale of our products in the United States and internationally. We also cannot predict the extent or impact of future legislation or regulations in the United States and abroad.

We are also subject to regulation under federal and state laws regarding, among other things, occupational safety, the use and handling of hazardous materials and protection of the environment. While we believe that we are in material compliance with these requirements, noncompliance with any such requirements could have a material adverse effect on our business.

The regulatory approval process outside the United States varies depending on foreign regulatory requirements and may limit our ability to develop, manufacture and sell our products internationally.

To market any of our products outside of the United States, we and our collaborative partners, including certain of our distributors, are subject to numerous and varying foreign regulatory requirements, implemented by foreign health authorities, governing the design and conduct of human clinical trials and marketing approval for diagnostic products. The approval procedure varies among countries and can involve additional testing, and the time required to obtain approval may differ from that required to obtain FDA approval. The foreign regulatory approval process includes all of the risks associated with obtaining FDA approval set forth above, and approval by the FDA does not ensure approval by the health authorities of any other country, nor does the approval by foreign health authorities ensure approval by the FDA.

As we have limited working capital, we may need additional capital that may not be available to us and, if raised, may dilute our shareholders’ ownership interest in us.

We may need to raise additional funds to develop or enhance our technologies, to fund expansion, to respond to competitive pressures or to acquire complementary products, businesses or technologies.

As of September 30, 2005, our total assets were $102.8 million and our total liabilities were $24.8 million. As of the same date, our working capital was $70.3 million and our cash and cash equivalents totaled $29.1 million. Current and anticipated demand for our products as well as procurement and production affect our need for capital. Changes in these or other factors could have a material impact on capital requirements and may require us to raise additional capital.

In 2005, except for shares issued through the Company’s Employee Stock Purchase Plan and through the exercise of stock options under the Incentive Stock Option Plans, the only other capital raised was through the exercise of warrants, which resulted in the issuance of 363,212 shares.

We anticipate that future changes in cash and working capital will be dependent on a number of factors including:

•		Our ability to manage effectively non-cash assets such as inventory and accounts receivable;

•		Our ability to anticipate and adapt to the changes in our industry such as new and alternative medical procedures;

•		Our level of profitability; and

•		Our determination to acquire or invest in products and businesses complementary to ours.

We have historically financed acquisitions using our existing cash resources. While we believe our existing cash resources, including our bank line of credit, will be sufficient to fund our operating needs for the next twelve months, additional financing will may be required for our currently envisioned long term needs.

Additional financing may not be available on terms that are acceptable to us. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our shareholders would be reduced and these securities might have rights, preferences and privileges senior to those of our current shareholders. If adequate funds are not available on acceptable terms,

our ability to fund our expansion, take advantage of unanticipated opportunities, develop or enhance our products or services, or otherwise respond to competitive pressures would be significantly limited.

We may have difficulty sustaining profitability and may experience additional losses in the future.

Although we recorded net income of $14.7 million, $2.5 million, and $0.3 million for fiscal years 2004, 2003, and 2002 respectively, prior to 2002, we had prolonged periods of consecutive quarterly net losses. At September 30, 2005, we had an accumulated deficit of $5.6 million. In order to maintain and improve our profitability, we will need to continue to generate new sales while controlling our costs. As we plan on continuing the growth of our business while implementing cost control measures, we may not be able to successfully generate enough revenues to remain profitable with this growth. Any failure to increase our revenues and control costs as we pursue our planned growth would harm our profitability and would likely negatively affect the market price of our stock.

We may be unable to respond to the rapid technological changes that often affect the markets in which we compete.

If we fail to rapidly develop, manufacture and market technologically innovative products at acceptable costs, our operating results will suffer.

We operate in an industry that is subject to rapid technological change. Our ability to remain competitive and future operating results will depend upon, among other things, our ability to anticipate and respond rapidly to such change by developing, manufacturing and marketing technologically innovative products in sufficient quantities at acceptable costs to meet such demand. As we introduce new products this may cause some of our existing products to become obsolete, which may result in the write-off of inventory. However, without new products and enhancements, our existing products will likely become obsolete due to technological advances by other companies, which could result in the write-off of inventory as well as diminished revenues. Therefore, we intend to continue to invest significant amounts in research and development.

Our expenditures for research and development were $5.4 million in the nine months ended September 30, 2005, $5.2 million in 2004, $4.4 million and $3.8 million in each year of 2003 and 2002, respectively. We anticipate that our ability to compete will require significant research and development expenditures with a continuing flow of innovative, high-quality products. We cannot assure that we will be successful in designing, manufacturing or selling enhanced or new products in a timely manner. Nor can we assure that a competitor could not introduce a new or enhanced product or technology that could have an adverse effect on our competitive position.

Our current research and development programs are directed toward the development of new laser systems and delivery devices. We cannot assure that these markets will develop as anticipated or that our product development efforts will prove successful. Nor can we assure that such new products, if developed and introduced, will be accepted by the market.

We may become a party to a patent infringement and other intellectual property related actions or disputes, which could result in significant royalty or other payments or in injunctions that can prevent the sale of our products.

Our industry has been characterized by frequent allegations of patent infringement and/or other intellectual property related activity including demands for licenses and litigation. Our competitors or other patent holders may assert that our products and the methods we employ are covered by their patents. In addition, we do not know whether our competitors will apply for and obtain patents that will prevent, limit or interfere with our ability to make, use, sell or import our products. Although we may seek to resolve any potential future claims or actions, we may not be able to do so on reasonable terms, or at all. If, following a successful third-party action for infringement, we cannot obtain a license or redesign our products, we may have to stop manufacturing and marketing our products, and our business would suffer as a result.

We may become involved in litigation not only as a result of alleged infringement of a third party’s intellectual property rights but also to protect our own intellectual property. We have and may hereafter become involved in litigation to protect the trademark rights associated with our company name or the names of our products. If we have to change the name of our products, we may experience a loss in goodwill associated with customer confusion and a loss of sales.

Infringement and other intellectual property related claims, with or without merit, can be expensive and time-consuming to litigate, and could divert management’s attention from our core business. We do not know whether necessary licenses would be available to us on satisfactory terms, or whether we could redesign our products or processes to avoid infringement. If we lose this kind of litigation, a court could require us to pay substantial damages, and prohibit us from using technologies essential to our products, either of which

would have a material adverse effect on our business, results of operations and financial condition.

Any acquisitions or divestitures we make may not provide us the expected benefits and could disrupt our business and harm our financial condition.

Any acquisitions we make may not provide us the expected benefits and could disrupt our business and harm our financial condition, results of operations and cash flows. We have acquired businesses and technologies in the past, and we may continue to acquire businesses or technologies that we believe are a strategic fit with our business. Any future acquisitions may result in unforeseen operating difficulties and expenditures and may absorb significant management attention that would otherwise be available for ongoing development of our business. In addition, the integration of acquisition targets may prove to be more difficult than expected, and we may be unsuccessful in maintaining and developing relations with the employees, customers and business partners and other acquisition targets. Since we will not be able to accurately predict these difficulties and expenditures, it is possible that these costs may outweigh the value we realize from a future acquisition. Future acquisitions could result in issuances of equity securities that would reduce our stockholders’ ownership interest, the incurrence of debt, contingent liabilities, deferred stock based compensation or expenses related to the valuation of goodwill or other intangible assets and the incurrence of large, immediate write-offs.

We may be unable to attract and retain key personnel who are critical to the success of our business.

Our future success also depends on our ability to attract and retain engineers and other highly skilled personnel and senior managers. In addition, in order to meet our planned growth we must increase our sales force, both domestic and international, with qualified employees and personnel. Hiring qualified technical, sales and management personnel is difficult due to a limited number of qualified professionals and competition in our industry for these types of personnel. We have in the past experienced delays and difficulties in recruiting and retaining qualified technical and sales personnel and believe that at times our personnel are recruited aggressively by our competitors and start-up companies. Our employees are “at will” and may leave our employment at any time. As a result, we may experience significant employee turnover. Failure to attract and retain personnel, particularly sales and technical personnel would make it difficult for us to develop and market our technologies.

In addition, our business and operations are substantially dependent on the performance of our key personnel, including Eric Reuter, our President and Chief Executive Officer, Derek Bertocci, Vice President Finance and Chief Financial Officer, Bob Mathews, Group Vice President, Operations and Product Development, and Robert Mann, Group Vice President, Worldwide Sales and Marketing. We do not have formal employment agreements with Messrs. Reuter, Bertocci, Mathews and Mann and do not maintain “key person” life insurance policies on their lives. If such individuals were to leave or become unable to perform services for our company, our business could be severely harmed.

Our quarterly operating results may fluctuate significantly and any failure to meet financial expectations for any fiscal quarter may cause our stock price to decline.

A number of factors affect our quarterly financial results including the timing of shipments and orders. Our laser products are relatively expensive pieces of medical capital equipment and the precise shipment date of specific units can have a marked effect on our results of operations on a quarterly basis. Additionally, our fiber optic disposable devices are relatively complex assemblies requiring components that can have long lead times. Failure of suppliers to provide materials in a timely manner or other disruptions in the continuous production of these fiber optics components could have a substantially marked effect on our results of operations on a quarterly basis. Any delay in product shipments near the end of a quarter could cause our quarterly results to fall short of anticipated levels. Furthermore, to the extent we receive orders near the end of a quarter, we may not be able to fulfill the order during the balance of that same quarter. Moreover, we typically receive a disproportionate percentage of orders toward the end of each quarter. To the extent that we do not receive anticipated orders or orders are delayed beyond the end of the applicable quarter, our results may be adversely affected and may be unpredictable from quarter to quarter. In addition, because a significant portion of our revenues in each quarter result from orders received in that quarter, we base our production, inventory and operating expenditure levels on anticipated revenue levels. Thus, if sales do not occur when expected, expenditure levels could be disproportionately high and operating results for that quarter and potentially future quarters, would be adversely affected. We cannot assure that Laserscope will accomplish revenue growth or profitability on a quarterly or annual basis. Nor can we assure that revenue growth or profitability will not fluctuate significantly from quarter to quarter.

If we are unable to expand and maintain our relationship with our U.S. distribution partner, Henry Schein, Inc. on favorable contractual terms, our business may be harmed.

In July 2005, we entered into a non-exclusive distribution agreement with Henry Schein, Inc. (the “HSI Agreement”), pursuant to which Henry Schein, Inc., a provider of healthcare products and services to office-based practitioners in the North American and European markets, will distribute our aesthetic product line to physicians and physician practices within the United States. The HSI Agreement is terminable by either party upon 90 days notice. The Henry Schein distribution relationship is intended to replace our distribution relationship with McKesson, which terminated effective November 9, 2005. McKesson had been our exclusive U.S. distribution partner for aesthetic products for nearly four years until April 2005, when our relationship with McKesson was made nonexclusive. On August 9, we received a notice from McKesson that it intended to terminate the McKesson Agreement effective in November 2005. Following the amendment of our distribution agreement with McKesson to make it nonexclusive and prior to termination of the distribution relationship with McKesson, we experienced a significant decline in sales of our aesthetic products through McKesson. Sales of our aesthetic products through the Henry Schein relationship failed to offset the decline in revenues through McKesson in the third quarter of 2005. A national distribution relationship that extends our reach is important to our success because the potential customer base for our aesthetic product line includes physicians from a variety of specialties including among others, dermatologists, plastic surgeons, primary care and OB/GYN physicians. During the term of our distribution relationship with McKesson, sales to McKesson accounted for a substantial portion of our revenues. Most recently, revenues from the McKesson relationship accounted for approximately 23% of our total revenues at December 31, 2004, and accounts receivable from McKesson accounted for approximately 25% of our total accounts receivable. For the nine month period ended September 30, 2005, sales through McKesson accounted for approximately 8% of our total revenues and at September 30, 2005 accounts receivable from McKesson accounted for approximately 5% of our total accounts receivable. Although we expect revenue generated through Henry Schein to increase significantly as this new distribution relationship is fully implemented, there can there be no assurance that our distribution relationship with Henry Schein will adequately replace our relationship with McKesson and we may be unable to generate sufficient revenues on a timely basis or at all. If we are unable to effect a timely and effective transition to the new distribution relationship and maintain a favorable relationship with Henry Schein and/or another major U.S. distribution partner or if Henry Schein or any such other U.S. distribution partner encounters financial difficulties, it could have a material adverse effect on our business, financial condition, results of operations, and future cash flows.

If we are unable to effect a swift transition and rapidly establish a strong working relationship with our U.S. distribution partner, Henry Schein, we may be unable to achieve growth in sales of our aesthetic product line in a timely manner or at all.

The Henry Schein distribution relationship has replaced the McKesson distribution relationship as our principal U.S. distribution network for our aesthetic product line, but as of yet has not replaced the revenues previously generated through McKesson. During 2004, sales to McKesson accounted for approximately 23% of our total revenues, and revenues generated through McKesson in 2005 declined, such sales represented a material portion of our revenues. In the third quarter of 2005, revenues generated through Henry Schein failed to offset the decline in revenues through McKesson. Establishing a strong U.S. distribution partner for our aesthetic products is important to our future success in the near future and beyond. The initial phase of our distribution relationship with Henry Schein involves significant training and coordination activities which are necessary to achieve a successful distribution partnership. Although to date we have made substantial progress in effecting this transition, unless we are able to accelerate this process and expand our relationship rapidly we will be unable to generate revenues sufficient to replace those previously generated through our relationship with McKesson.

If our products contain defects that harm our customers’ patients, it would damage our reputation, subject us to potential legal liability and cause us to lose customers and revenue.

Laser systems and fiber optic delivery devices are inherently complex in design and manufacturing. Laser systems require ongoing regular maintenance. The manufacture of our lasers, laser products, disposable delivery devices, and systems involve highly complex and precise processes. As a result of the technical complexity of our products, changes in our or our suppliers’ manufacturing processes or the inadvertent use of defective materials by us or our suppliers could result in a material adverse effect on our ability to achieve acceptable manufacturing yields and product reliability. To the extent that we do not achieve such yields or product reliability, this could have a material affect on our business, financial position, and results of operations.

Our customers may discover defects in our products after the products have been fully deployed and operated under peak stress conditions. In addition some of our products are combined with products from other vendors, which may contain defects. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to fix defects or other problems, we could experience, among other things:

•

loss of customers;

•		increased costs of product, returns and warranty expenses;

•		damage to our brand reputation;

•		failure to attract new customers or achieve market acceptance;

•		action by regulatory authorities;

•		diversion of development and engineering resources; and

•		legal actions by our customers.

The occurrence of any one or more of the foregoing factors could seriously harm our business, financial condition and results of operations.

Our financial results and stock price are affected by a number of factors which are beyond our control.

A number of factors affect our financial results and stock price including, but not limited to:

•		product mix;

•		competitive pricing pressures;

•		material costs;

•		revenue and expenses related to new products and enhancements to existing products;

•		delays in customer purchases in anticipation of new products or product enhancements by Laserscope or its competitors; and

•		the risk of loss or interruption to our operations or increased costs due to earthquakes, the availability of power and energy supplies and other events beyond our control.

The market price of our common stock has historically been subject to significant fluctuations. These fluctuations may be due to factors specific to Laserscope, such as:

•		quarterly fluctuations in our financial results;

•		changes in analysts’ estimates of future results;

•		changes in investors’ perceptions of our products;

•		announcement of new or enhanced products by us or our competitors;

•		announcements relating to acquisitions and strategic transactions by us or our competitors;

•		general conditions in the medical equipment industry; and

•		general conditions in the financial markets.

The stock market has from time to time experienced extreme price and volume fluctuations, particularly among stocks of high technology companies, which, on occasion, have been unrelated to the operating performance of particular companies. Factors not directly related to our performance, such as negative industry reports or disappointing earnings announcements by publicly traded competitors, may have an adverse impact on the market price of our common stock.

As of October 31, 2005, we had 22,264,131 shares of outstanding common stock. The sale of a substantial number of shares of

common stock or the perception that such sales could occur, could adversely affect prevailing market prices for our common stock.

We are a party to legal proceedings arising in the ordinary course of business.

We are party to a number of legal proceedings arising in the ordinary course of business. While it is not feasible to predict or determine the outcome of the actions brought against us, we believe that the ultimate resolution of these claims will not ultimately have a material adverse effect on Laserscope’s financial position, results of operations, or future cash flows.

We typically assume warranty obligations in connection with the sales of our products, which could cause a significant drain on our resources if our products perform poorly.

We have a direct field service organization that provides service for our products. We generally provide a twelve month warranty on our laser systems. After the warranty period, maintenance and support is provided on a service contract basis or on an individual call basis. Our warranties and premium service contracts provide for a “99.0% Uptime Guarantee” on our laser systems. Under provisions of this guarantee, at the request of the customer, we extend the term of the related warranty or service contract if specified system uptime levels are not maintained. Although the number of warranties extended under this program are currently not material, we can not assure that the number of warranties will not become significant in the future if our products perform poorly, which could cause a significant drain on our resources.

Natural catastrophic events, such as earthquakes, hurricanes, or terrorist attacks may reduce our revenues and harm our business.

Our corporate headquarters, including our research and development operations, our manufacturing facilities, and our principal sales, marketing and service offices, are located in the Silicon Valley area of Northern California, a region known for seismic activity. A significant natural disaster, such as an earthquake or a flood, could have a material adverse impact on our business, operating results, and financial condition. In addition, despite our implementation of network security measures, our servers are vulnerable to computer viruses, break-ins, and similar disruptions from unauthorized tampering with our computer systems. Any such event could have a material adverse effect on our business, operating results, and financial condition.

In addition, as our business has grown, we have become increasingly subject to the risks arising from adverse changes in domestic and global economic conditions, natural and man-made disasters. Disruptions in large areas of the United States due to natural disasters and subsequent relief efforts, as seen with the hurricanes that struck the southern United States in the summer and fall of 2005, could have a material adverse effect on our business, operating results, and financial condition. The effects of war or acts of terrorism could likewise have a material adverse effect on our business, operating results, and financial condition. The terrorist attacks in New York, Pennsylvania and Washington, D.C. on September 11, 2001 disrupted commerce throughout the world and intensified the uncertainty of the United States and other economies. The continued threat of terrorism and heightened security and military action in response to this threat, or any future acts of terrorism, may cause further disruptions to these economies and create further uncertainties. To the extent that such disruptions or uncertainties result in delays or cancellations of customer orders, or the manufacture or shipment of our products, our business, operating results, financial condition and cash flows could be materially and adversely affected.

No Dividends.

We have never paid cash dividends on our common stock and do not anticipate paying cash dividends on the common stock in the foreseeable future. The payment of dividends on the common stock will depend on our earnings, financial condition and other business and economic factors affecting us at such time as the Board of Directors may consider relevant.

The exercise of outstanding options and warrants granted under Laserscope’s stock option plans and other options and warrants may result in dilution of our shareholders equity interests.

Shareholders may experience dilution in the net tangible book value of their investment upon the exercise of outstanding options and warrants granted under our stock option plans and other options and warrants.

Other Risks.

Other risks are detailed from time to time in our press releases and other public disclosure filings with the United States Securities and Exchange Commission (“SEC”), copies of which are available upon request from the Company.

Item 3. Quantitative and Qualitative Disclosures About Market Risk.

We are exposed to a variety of risks, including changes in interest rates affecting the return on its investments, outstanding debt balances and foreign currency fluctuations. In the normal course of business, the Company employs established policies and procedures to manage its exposure to fluctuations in interest rates and foreign currency values.

Interest Rate Risk.

At September 30, 2005, we had no bank loans or debentures. In the nine months ended September 30, 2005 and 2004, we did not use derivative financial instruments. We invest our excess cash in money market funds. Historically, our debt financings generally consisted of convertible debentures and bank loans requiring either fixed or variable rate interest payments. Investments in and borrowings under both fixed-rate and floating-rate interest-earning instruments carry a degree of interest rate risk. On the investment side, fixed-rate securities may have their fair market value adversely affected due to a rise in interest rates, while floating-rate securities may produce less income than expected if interest rates fall. In addition, our future investment income may fall short of expectations due to changes in interest rates or we may suffer losses in principal if forced to sell securities that have declined in market value due to changes in interest rates. On the debt side, borrowings that require fixed-rate interest payments require greater than current market rate interest payments if interest rates fall, while floating rate borrowings may require greater interest payments if interest rates rise. While we had no borrowing in the current quarter, if we borrow in the future, our interest expense may be greater than expected due to changes in interest rates.

Foreign Currency Risk.

Our International revenues were 29% and 23% of total revenues in the quarters ended September 30, 2005 and 2004. Our international sales are made through international distributors and wholly owned subsidiaries with payments to the Company typically denominated in the local currencies of the United Kingdom and France, and in United States dollars in the rest of the world. Our expenses are typically denominated in local currencies. Our international business is subject to risks typical of an international business, including, but not limited to, differing economic conditions, changes in political climate, differing tax structures, other regulations and restrictions, and foreign exchange rate volatility. Accordingly, our future results could be materially adversely affected by changes in these or other factors. We do not engage in hedging transactions for speculative or trading purposes.

Item 4. Controls and Procedures.

(a) Evaluation of disclosure controls and procedures.

Our chief executive officer and our chief financial officer, after evaluating the effectiveness of the Company’s “disclosure controls and procedures” as defined in the Securities Exchange Act of 1934, as amended (the “Exchange Act”), Rules 13a-15(e) or 15d-15(e) as of the end of the period covered by this report (the “Evaluation Date”), have concluded that, as of the Evaluation Date, our disclosure controls and procedures were effective based on the evaluation of these controls and procedures required by paragraph (b) of Exchange Act Rules 13a-15 or 13d-15.

(b) Changes in internal controls.

No change in the Company’s internal control over financial reporting identified in connection with the evaluation required by paragraph (d) of Exchange Act Rules 13a-15 or 15d-15 that occurred during the Company’s second fiscal quarter has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

Limitations on Effectiveness of Disclosure Controls. We intend to review and evaluate the design and effectiveness of our disclosure controls and procedures on an ongoing basis and to correct any material deficiencies that we may discover. Our goal is to ensure that our senior management has timely access to material information that could affect our business. While we believe the present design of our disclosure controls and procedures is effective to achieve our goal, future events affecting our business may cause us to modify our disclosure controls and procedures. The effectiveness of controls cannot be absolute because the cost to design and implement a control to identify errors or mitigate the risk of errors occurring should not outweigh the potential loss caused by errors that would likely be detected by the control. Moreover, we believe that disclosure controls and procedures cannot be guaranteed to be 100% effective all of the time. Accordingly, a control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met.

PART II. OTHER INFORMATION

Item 5. Other Information

Palomar Medical Technologies, Inc. (“Palomar”) has informed Laserscope that it disputes the method used by Laserscope for calculating the royalty to be paid on the Lyra laser system pursuant to the Patent License Agreement between Laserscope and Palomar (the “License Agreement”). Palomar also disputes our application of the License Agreement to the Gemini laser system, including our calculation of royalties due on the Gemini laser system under the License Agreement. In the third quarter of 2005, Palomar exercised its right under the Patent License Agreement to engage an independent auditor to conduct a review of our royalty calculations and payments under the Patent License Agreement. The independent auditors have not yet issued a report of their findings. We believe that we have been correctly calculating and paying the royalties owed to Palomar under the License Agreement and intend to continue to negotiate with Palomar while vigorously defending our position. If our dispute with Palomar is resolved in a manner contrary to our position, we could be required to record additional expenses which could have a material adverse impact on our financial results.

Item 6. Exhibits

(a) Exhibits filed herewith (numbered in accordance with Item 601 of Regulation S-K):


Exhibit
Number		Description
10.1*		Form of Distribution Agreement between Laserscope and Henry Schein, Inc. dated July 29, 2005.

31.1		Certification of Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

31.2		Certification of Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1		Certification of Principal Executive Officer pursuant to 18 U.S.C Section 1350.

32.2		Certification of Principal Financial Officer pursuant to 18 U.S.C. Section 1350.

* Confidential treatment has been requested.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


	LASERSCOPE Registrant
	/s/ Derek Bertocci
	Derek Bertocci
	Vice President, Finance and Chief Financial Officer (Principal Financial and Accounting Officer)

Date: November 9, 2005

Exhibit Index


Exhibit
Number		Description
10.1*		Form of Distribution Agreement between Laserscope and Henry Schein, Inc. dated July 29, 2005

31.1		Certification of Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

31.2		Certification of Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1		Certification of Principal Executive Officer pursuant to 18 U.S.C Section 1350.

32.2		Certification of Principal Financial Officer pursuant to 18 U.S.C. Section 1350.


*		Confidential Treatment has been requested.

EX-10.1 2 f14264exv10w1.htm EXHIBIT 10.1 exv10w1

Exhibit 10.1

Portions of this agreement have been omitted and separately filed with the SEC with a request for confidential treatment. The location of those omissions have been noted by [**].

FORM OF HENRY SCHEIN, INC. DISTRIBUTION AGREEMENT

This Distribution Agreement (“Agreement”) is made and entered into as of July 29, 2005 (“Effective Date”) by and between Henry Schein, Inc. (“HSI”), on behalf of itself and its wholly-owned U.S. subsidiaries (“Subsidiaries”) to participate under this Agreement (HSI and the Subsidiaries, individually and collectively referred to herein as “Buyer”), having its principal place of business at 135 Duryea Road, Melville, New York 11747, and Laserscope (“Seller”), having its principal place of business at 3070 Orchard Drive, San Jose, California 95134.

In consideration of the mutual covenants contained in this Agreement, and for other good and valuable consideration, the sufficiency of which is acknowledged by both parties, the parties above agree as follows:

1. Appointment. Subject to the terms and conditions set forth herein, Seller appoints Buyer as its nonexclusive national distributor for the resale of all products of Seller listed on Exhibit A (the “Products”) to physicians and physician practices within the United States of America including the District of Columbia, all 50 states, and all its territories and possessions (the “Territory”), and Buyer accepts such appointment. Subject to the terms and conditions set forth herein, such appointment shall be in effect for a period of three (3) years following the Effective Date and shall continue automatically in effect for successive terms of three (3) years each until terminated as described in Section 12 below. Buyer’s rights hereunder are non-assignable (except in accordance with Section 14(d) below), non-licensable and non-sublicensable.

2. Price. Seller shall sell the Products to Buyer in such quantities as Buyer may order and at the [**] delivered to Buyer’s principal place of business. [**].

3. Representations and Warranties.

3.1 Seller hereby represents and warrants to Buyer that:

(a) All corporate actions on the part of Buyer, its respective officers, directors and shareholders necessary for the authorization, execution and delivery of this Agreement and the performance of all obligations of it hereunder have been taken or will be taken prior to the execution hereof, and the Agreement, when executed and delivered by the parties, shall constitute valid and legally binding obligations of the parties, enforceable against the respective parties in accordance with its terms;

(b) Seller will convey to Buyer good title to the Products, free and clear of all security interests, liens or other encumbrances of any kind or character;

(c) Seller has manufactured, packaged and is selling the Products to Buyer in compliance with all applicable federal, state, and local laws, rules and regulations (including, without limitation, applicable laws regarding labeling, environmental protection, shipping, labor, customs regulations, country of origin requirements and the Foreign Corrupt Practices Act, and any applicable ISO standards) and shall not violate any trademark, trade dress, trade name, trade secret, patent, or copyright. None of the Products when disposed of will constitute “hazardous waste” under regulations (the “Regulations”) promulgated by the Environmental Protection Agency under Subpart C of the Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act of 1976, as amended, or if any of the Products when disposed of will constitute “hazardous waste” under the Regulations, Seller has notified Buyer as to the identity of such Products;

(d)

[**];

(e)

[**];

(f)

[**]; and

(g)

[**].

3.2

Buyer represents and warrants to Seller that:

[**] Confidential or proprietary information redacted.

(a) All corporate actions on the part of Seller, its respective officers, directors and shareholders necessary for the authorization, execution and delivery of this Agreement and the performance of all obligations of it hereunder have been taken or will be taken prior to the execution hereof, and the Agreement, when executed and delivered by the parties, shall constitute valid and legally binding obligations of the parties, enforceable against the respective parties in accordance with its terms.

(b) Buyer has been duly registered and organized in accordance with any and all applicable laws, has received any and all necessary governmental authorizations to enter into and perform its obligations under this Agreement, and that its entry into and performance under this Agreement will not violate applicable laws.

(c) Buyer is duly registered with all necessary tax authorities and is in compliance with all payment obligations, including tax obligations, in accordance with applicable laws.

(d) Buyer’s bank accounts have been established and operated in accordance with applicable laws. All transactions of Buyer required to be carried out through authorized banks have been so carried out. Buyer has not and will not breach any currency regulation or currency control legislation, or any bank secrecy act, rules or regulations.

4. Duties of the Parties

4.1. Seller’s Duties. Seller hereby agrees, as long as this Agreement is in effect, as follows:

(a) [**];

(b) During the term of this Agreement, Seller shall maintain commercial general liability insurance with minimum limits of coverage of [**]. The policy shall be an occurrence-based and not claims-made policy, except that Seller may provide a claims-made policy based upon Seller’s representation and warranty as follows: Seller hereby represents and warrants that [**] it shall continue to renew its product liability coverage for the term of this Agreement [**]. In the event that Buyer determines that Seller is not complying with its insurance obligations hereunder, Buyer may purchase and/or renew such insurance coverage necessary for Seller to comply with Seller’s insurance obligations hereunder. Seller shall reimburse Buyer for such costs incurred, and Buyer may offset the cost of such insurance against any amounts it owes Seller. This occurrence-based or claims-made coverage shall insure against [**]. Upon execution of this Agreement, Seller shall provide Buyer with a certificate of insurance [**] with respect to all forms of coverage available to Seller pursuant to its policy or policies of general liability insurance, including but not limited to the forms of coverage identified above, and with the limits of liability specified above. Seller shall furnish to Buyer a certificate of insurance evidencing such coverage, certifying that the policy or policies of insurance described therein will not be altered, modified or canceled in any way that adversely affects Buyer’s interest hereunder without giving Buyer [**] written notice;

(c) Subject to Section 8 hereof, Seller shall promptly satisfy Buyer’s orders for the Products, to enable Buyer to maintain a supply of the Products sufficient to provide adequate and timely service to Buyer’s customers; and

(d) Seller will provide notice to Buyer of any regulatory action related to its operations that is likely to have a material adverse effect on Seller’s ability to comply or perform under this Agreement and Seller shall be responsible, if required by applicable Legal Requirements, for notifying the appropriate federal, state and local authorities of any customer complaints or other occurrences regarding the Products, evaluating all complaints and responding to Buyer in writing on the resolution of any complaints from Buyer for its customers.

4.2 Buyer’s Duties. Buyer hereby agrees, as long as this Agreement is in effect, as follows:

(a) Buyer shall [**] promote the products and to satisfy customer demand for the Products;

(b) Buyer, at least [**] each year, shall provide reasonable time for certain of its sales personnel to meet with a sales representative of Seller;

(c) Buyer shall actively promote, distribute and sell Products only within the Territory, and neither Buyer nor its Subsidiaries shall promote or solicit orders for Product or sell, offer to sell or otherwise distribute Product outside the Territory, or where they ought reasonably to be aware that the ultimate destination for Product is outside the Territory. Buyer and its Subsidiaries and their respective employees and agents shall not promote Product for any indications not approved for such Product by the United

[**] Confidential or proprietary information redacted.

States Food and Drug Administration. Buyer shall forward to Seller all inquiries relating to Products from customers or potential customers outside the Territory;

(d) Buyer shall not make any alterations or knowingly permit any alterations to be made to Product (including without limitation labeling, instructions or equipment) without Seller’s express written consent, which consent may be withheld in Seller’s sole discretion;

(e) Buyer shall, and shall require its Subsidiaries to, conduct all promotion, marketing, distribution and sale of Products, including, without limitation, handling, inventory and storage of Product, in compliance with all applicable laws and regulations and all applicable rules and requirements of Seller;

(f) Buyer shall, at its expense, obtain and maintain in full force and effect throughout the term of this Agreement any and all licenses and approvals necessary for its distribution and sale of Product in the Territory, in full compliance with all applicable laws and regulations. Buyer shall not use any advertisement or marketing material on, with respect to or relating to any Product unless such advertisement or marketing material has been provided by Seller or has first been submitted to and approved by Seller in advance in writing;

(g) Buyer shall provide notice to Seller of any regulatory action related to its operations that is likely to have a material adverse effect on Buyer’s ability to comply or perform under this Agreement;

(h) Buyer shall not, without Seller’s prior written consent, appoint any subdistributors or agents to promote and/or distribute Products. Further, notwithstanding any such appointment, or Seller’s approval thereof, Buyer shall at all times remain fully liable for performance of its subdistributors and/or agents and Buyer hereby agrees to indemnify and hold harmless Seller from all damages, losses, costs or expenses arising in any manner from any act or omission on the part of its subdistributors or agents;

(i) Buyer shall promptly furnish Seller with copies of any correspondence or other communications from its customers with respect to the use of the Products, Product applications, suggestions for modification of or improvement to the Products, and other pertinent information; and

(j) The Products are offered for sale and manufactured by Seller. Such sale does not convey or license to Buyer the right to, and Buyer shall not, directly or indirectly, manufacture, duplicate or otherwise copy or reproduce any of the Products or any portion thereof. In addition, Buyer shall not, directly or indirectly, reverse engineer any of the Products or any portion thereof, including without limitation, any designs, assemblies, lasers, fiber optics, circuits, firmware or software contained therein. Buyer will take appropriate steps to inform its customers of and assure compliance with these restrictions.

(k) As a condition to amendment of the definition of “Products” pursuant hereto, Buyer shall take such actions as Seller may deem necessary or appropriate to ensure end user compliance with the Seller’s policies, procedures and restrictions of use of such new Products.

4.3 [**].

4.4 [**].

5. Shipment, Risk of Loss and Title. All shipments of Products (other than drop shipments directly from Seller to Buyer’s customers) shall be shipped by Seller [**], with risk of loss and title to Products to pass to Buyer upon [**], unless otherwise specified in an agreement signed by the parties hereto. Drop shipments of Products directly from Seller to Buyer’s customers shall be shipped by Seller [**], with risk of loss and title to Products to pass to Buyer [**]. [**].

6. Defective Products. In the event that any of the Products when delivered to recipient do not conform to Seller’s warranty or are otherwise defective or damaged as delivered to the recipient, recipient shall notify Seller as to such condition promptly upon recipient’s discovery of same, and shall provide Seller with a reasonable opportunity to inspect such Products. Seller shall, in its sole discretion, either repair or replace or shall refund the invoice price associated with, any Products which do not conform to Seller’s warranty or are otherwise defective or damaged as delivered to the recipient, upon the return of such Products to Seller. All transportation charges for the return of such Products shall be paid by [**].

7. Returned Products

[**] Confidential or proprietary information redacted.

7.1 Pre-authorized Returns. In the event that (i) Seller fails to correctly fill any of Buyer’s orders for Products, or (ii) Products are discontinued and unsalable, or (iii) the Products are subject to an injunction or governmental order or regulation which suspends the marketability of the Products, or (iv) the Products are subject to expiration dating and have a remaining “shelf life” of less than [**] (unless otherwise agreed to by the parties and attached as an Exhibit hereto) of their total “shelf life,” or (v) Products are returnable without authorization pursuant to any written agreement between Buyer and Seller, then Buyer shall have the right to return the affected Products to Seller and to receive a refund of the invoice price for such Products. Unless otherwise agreed, Buyer shall return all Products to Seller by Seller’s catalog and/or lot numbers. All transportation charges resulting from the return of Products pursuant to this Subsection 7.1 shall be paid [**].

7.2 Other Returns. For specific Products purchased by and shipped directly to Buyer pursuant to a purchase order indicating that such Products are not being purchased for resale to a specified third party (i.e. such Products are being purchased for Buyer’s inventory), Buyer shall have the right to return for its convenience any such specific Product to Seller within [**] of its delivery to Buyer, provided such Product is identified by applicable serial number and is in new and unopened condition (with sufficient expiration dating, if applicable). For any Products shipped directly to Buyer for consignment, Buyer shall have the right to return a number of Products agreed in writing in advance by Seller and Buyer that are in new and unopened condition (with sufficient expiration dating, if applicable) to Seller [**]. Seller shall provide a return authorization to Buyer for such returns pursuant to this Subsection 7.2 within [**] of a request for return authorization. Seller shall credit Buyer, within [**] from the date of the return, the amount of the invoice price associated with all Products returned pursuant to this Subsection 7.2. [**] shall pay all transportation charges associated with the return of such Products to Seller pursuant to Subsection 7.2. [**].

8. Excusable Delays. Seller shall not be charged with any liability for delay or non-delivery of the Products when due to delays of suppliers, acts of God or the public enemy, compliance in good faith with any applicable foreign or domestic governmental regulation or order whether or not proven to be valid, riots, labor disputes, unusually severe weather or any other cause beyond the reasonable control of Seller. Seller shall give Buyer written notification of any material or indefinite delay due to such causes. Within [**] after receipt of any such notification from Seller, Buyer shall instruct Seller in writing that the portion of Buyer’s order affected by such delay is either (i) affirmed, and the time for performance extended for as many days as such causes actually retard deliveries; or (ii) terminated.

9. Taxes. Buyer is responsible for all taxes (excluding Seller’s income taxes) arising from Seller’s sale of the Products to Buyer. If Buyer claims exemption from any taxes related to such sales, Buyer shall supply such documentation as Seller is required to collect to support such exemption. Seller shall include amounts on its invoices for any taxes related to such sales that it is required to collect under applicable laws and will remit them to the appropriate governmental agencies. Buyer agrees to pay for any taxes related to such sales that are billed on Seller’s invoices. Buyer is solely responsible for the payment of any other taxes arising from its purchase of the Products. Buyer agrees to pay Seller for any additional taxes related to such sales (excluding Seller’s income taxes) that are assessed by governmental agencies.

10. Trademarks and Other Intellectual Property: Use of Buyer’s Name.

10.1 All Seller trademarks (the “Trademarks”) and derivatives thereof relating to Products, and all technology and other Intellectual Property (as defined below), are the sole and exclusive property of Seller. Seller hereby grants Buyer permission to use the Trademarks in the Territory for the limited purpose of Buyer performing its rights and obligations under this Agreement during the Term. Products shall be promoted, sold and distributed only under the Trademarks. Buyer shall ensure that each use of and reference to any of the Trademarks (by Buyer or its Subsidiaries) is accompanied by a statement that it is a registered trademark of Seller. Seller may, in its sole discretion, modify or discontinue the use of any trademark and/or use one or more additional or substitute marks or names, and Buyer and its Subsidiaries shall be obligated to do the same in connection with marketing and selling Products.

For purposes of this Agreement, “Intellectual Property” means all of Seller’s worldwide patents, software, Trademarks, trade names, inventions, copyrights, regulatory approvals, know-how, Trade Secrets, and all the goodwill associated therewith, and all other intellectual property rights, in existence as of the effective date of this Agreement or hereafter developed or acquired by Seller, relating to the design, manufacture, operation or maintenance of the Products.

For purposes of this Agreement, “Trade Secrets” means any formula, pattern, device, or compilation of information which is used in Seller’s business and which provides competitive advantage to Seller and which is not known or used by Seller’s competitors or the public. This term includes, but is not limited to, formulas, compounds, manufacturing or servicing processes, methods for treating or preserving materials, patterns for the design or operation of machines and devices, materials filed with governmental agencies, regulatory submission with government agencies, customer lists, and information relating to the marketing of Seller’s products and services.

[**] Confidential or proprietary information redacted.

10.2 Neither Buyer nor its Subsidiaries shall: (i) use the Trademarks in any way that might prejudice their distinctiveness or validity or the goodwill of Seller therein; (ii) use any Trademark in connection with the sale of any other product, or use any other trademark other than the Trademarks, in connection with Products; (iii) modify Products or its labeling or packaging or alter, obscure, or remove the Trademarks, indication of the source of origin, other means of identification or other markings used on or in relation to Product; or (iv) at any time during or after the term of this Agreement challenge or assist others to challenge the Trademarks or the registration thereof, or use or make any application for registration in the Territory of any trademarks or tradenames so resembling any trademark or tradename of Seller (including, without limitation, any Trademark) as to be likely to cause confusion or deception. [**].

10.3 The Product(s) may contain software which is proprietary to Seller. Seller at all times retains ownership of and title to the software supplied with a Product, and to the Trade Secrets (as defined herein) embodied in such software. Subject to the terms of this Agreement, Seller grants Buyer a non-exclusive license to use such software in the form(s) and on the medium(s) which is/are delivered. The use of these programs are for the purpose of operating the Product(s) in accordance with the instructions in the Operator’s Manual(s) and for no other purposes. Buyer may not reverse assemble or reverse compile such software, nor make any copy of such software or apply any techniques to derive the Trade Secrets embodied therein. No licenses are granted by Seller to Buyer under this Agreement, whether by implication, estoppel or otherwise, except as expressly set forth herein.

104 In the event Buyer becomes aware of any infringement of, or threatened or suspected infringement of, or challenge to any Trademark or other Intellectual Property of Seller, Buyer shall notify Seller immediately. Seller shall investigate any alleged violation and may take legal action as it deems appropriate to resolve the issue and to prevent others from infringing on its Intellectual Property rights within the Territory. At Seller’s reasonable request, and at Seller’s expense, Buyer shall cooperate with and assist Seller in connection with any such infringement.

10.5 Except only for the limited rights as expressly permitted hereunder, and then only as necessary for the proper performance of Buyer’s obligations hereunder, Buyer hereby acknowledges that it shall acquire no rights, express or implied, in respect of any of Seller’s Intellectual Property, including the tradenames or trademarks of Seller (including but not limited to the Trademarks) or of the goodwill associated therewith and that all such rights and goodwill are, and shall remain, vested in Seller.

10.6 Buyer will not do, nor will Buyer allow or authorize its Subsidiaries or anyone else to do, any act which would or might invalidate or be inconsistent with the Intellectual Property of Seller (including the Trademarks), and Buyer shall not omit or allow or authorize anyone to omit to do any act which, by its omission, would have that effect.

11. [**].

12. Termination.

12.1 Either party hereto may terminate this Agreement, as follows: (1) for cause, upon [**] written notice to the other party, in the event that the other party: (i) shall fail to perform any of the obligations in this Agreement (unless such failure is caused by a material act or omission by the other party) and such failure shall continue for a period of [**] after written notice thereof; or (ii) shall become insolvent, file a voluntary petition under any law relating to bankruptcy or insolvency, or shall become unable to pay its debt when due; or (2) without cause, by giving the other party [**] advance written notice thereof.

12.2 Upon expiration or termination of this Agreement, Buyer will return to Seller, at [**] expense (1) all sales promotion materials and aids provided hereunder and (2) any tools or equipment loaned or furnished to Buyer pursuant to this Agreement. Buyer also shall furnish Seller with the names and addresses of (1) customers that have purchased or otherwise acquired Products from Buyer, and (2) any persons or entities that have assisted in the sale or distribution of the Products.

12.3 The provisions of this Agreement expressly concerning obligations of records and payment, confidentiality and non-disclosure, indemnification, termination, and provisions concerning Product warranties, no right to manufacture or copy, no reverse engineering, intellectual property rights, and limitations of liability, shall survive any expiration or termination of this Agreement for any reason.

12.4 IN THE EVENT OF TERMINATION BY EITHER PARTY IN ACCORDANCE WITH ANY OF THE PROVISIONS OF THIS AGREEMENT AND SUBJECT TO SECTION 13.4, NEITHER PARTY SHALL BE LIABLE TO THE OTHER, AND EACH PARTY HEREBY EXPRESSLY WAIVES ALL RIGHTS, BECAUSE OF SUCH TERMINATION, FOR COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PROSPECTIVE PROFITS OR ANTICIPATED SALES OR ON ACCOUNT OF EXPENDITURES, INVENTORY, INVESTMENTS, LEASES OR

[**] Confidential or proprietary information redacted.

COMMITMENTS IN CONNECTION WITH THE BUSINESS OR GOODWILL OF SELLER OR BUYER. TERMINATION SHALL NOT, HOWEVER, RELIEVE EITHER PARTY OF OBLIGATIONS INCURRED PRIOR TO THE TERMINATION.

13. Confidentiality and Non-Disclosure.

13.1 As used herein, “Confidential Information” shall mean any information relating to the business of the disclosing party which the disclosing party has marked as “confidential,” designated as confidential in this Agreement or, in the case of oral information, has identified as confidential in writing to the receiving party within thirty (30) days of disclosure. Notwithstanding the foregoing, information which is orally or visually disclosed to the receiving party by the disclosing party, or is disclosed in writing without an appropriate letter, proprietary stamp or legend, shall constitute Confidential Information if it would be apparent to a reasonable person, familiar with the disclosing party’s business and the industry in which it operates, that such information is of a confidential or proprietary nature. The pricing and pricing terms in this Agreement and any other agreement between Seller and Buyer shall be deemed “Confidential Information.” Notwithstanding anything to the contrary in this Section 13, Confidential Information shall not include: information that is approved for public release by the written authorization of the disclosing party; information that was disclosed to the receiving party by a third party having the legal right to make such disclosure, or which the receiving party can establish was in its lawful possession prior to its receipt thereof from the disclosing party; information that is in the public domain prior to the receiving party’s receipt thereof from the disclosing party, or which subsequently becomes a part of the public domain other than by the receiving party’s negligence or wrongful act; such information required to be disclosed by law, governmental or regulatory request or legal process; or information that the receiving party can establish was independently developed without breach of this Agreement or use of Confidential Information.

13.2 Non-disclosure. Except to the extent permitted under this Section 13, each party: (i) shall not disclose Confidential Information of the other party to any third party without first obtaining the express written permission of the disclosing party; (ii) shall use Confidential Information of the other party only as is necessary to fulfill its obligations pursuant to this Agreement; (iii) shall limit such disclosure to any of its officers, employees or agents on a need-to-know basis for purposes of fulfilling its obligations under this Agreement, provided that any such non-employees of recipient are bound by this Agreement or confidentiality obligations substantially similar to those set forth in this Agreement; and (iv) may disclose this agreement, any amendments, and such Confidential Information to its outside attorneys and independent accountants, on a need to know basis. Notwithstanding the foregoing, Confidential Information of the other party may be disclosed pursuant to a subpoena or court order, provided that the receiving party gives prompt notice to the disclosing party that it intends to make such disclosure so that the other party can take any appropriate steps it deems necessary to limit the extent of such disclosure or to seek protection of such disclosure.

13.3 Nothing in this Section shall impair either party’s compliance with any requirements of the Securities and Exchange Commission or the national securities exchange or other stock market on which such Party’s securities are traded. In connection with any filing by either Party of a copy of this Agreement with the Securities and Exchange Commission (or the national securities exchange or other stock market on which such Party’s securities are traded), the filing party shall endeavor to obtain confidential treatment of economic and trade secret information.

13.4 Effect of Termination or Expiration. Upon termination or expiration of this Agreement, each party shall return to the other party or destroy any Confidential Information of the other party and provide a written verification of such return or destruction. Each party’s obligation to maintain the confidentiality of Confidential Information shall survive [**] following termination or expiration of this Agreement.

14. Miscellaneous.

(a) The relationship between the parties hereto shall be that of independent contracting parties. Under no circumstances will either party hereto act or attempt to act, or represent itself, directly or indirectly, as an agent of the other party hereto except as expressly permitted herein. All sales and other agreements between Buyer and its customers are Buyer’s exclusive responsibility and do not affect Buyer’s obligations under this Agreement. Buyer shall assume sole responsibility for all claims, damages, obligations, injuries and liabilities, including non-compliance with local regulatory requirements, arising from its acts or omissions or the acts or omissions of its employees, servants, agents clients, or representatives.

(b) This Agreement and the transactions provided for herein are to be governed by and construed in accordance with the laws of the State of California without regard to laws dictating choice of law or resolving conflicts of laws. The parties hereby agree that any action that arises from this agreement shall be subject to the exclusive jurisdiction of the courts within Santa Clara County in the State of California.

[**] Confidential or proprietary information redacted.

(c) This Agreement embodies the entire agreement and understanding between the parties hereto and supersedes all prior agreements and understandings relating to the subject matter hereof. No subsequently delivered invoice, purchase order, acknowledgment, confirmation, standard terms and conditions or similar document, whether submitted in writing, electronically, or via fax, containing terms inconsistent herewith shall be effective to amend or modify this Agreement unless such document expressly states the intention to do so and is signed by both parties hereto. The failure on the part of either party to exercise or enforce any right under this Agreement shall not be deemed to be a waiver of any such right or similar subsequent rights or operate to bar the exercise of enforcement thereof at anytime or times thereafter.

(d) Neither party may assign this Agreement or any of its rights, duties or obligations hereunder without the prior written consent of the other party, which consent shall not be unreasonably withheld or delayed; provided that either party may assign this Agreement and its rights, duties and obligations hereunder to a successor entity in connection with the sale of all or substantially all of its assets or the merger, acquisition or other consolidation of such party with or into another party, and the other party’s consent shall not be required hereunder in connection therewith. This Agreement shall be binding upon and inure to the benefit of the permitted assigns and successors in interest of the respective parties.

(e) All notices, requests, demands and other communications called for or contemplated herein shall be in writing and sent by commercial courier or commercial overnight delivery service (e.g., FedEx, DHL) , to the address shown on the first page of this Agreement, or at such other address, as either party may designate in writing. A notice shall be deemed delivered upon the date of its actual receipt.

(f) All sales by Buyer shall be exclusive of Seller’s service contract revenue. All service contract revenues shall be handled directly through the Seller’s organization.

(g) Neither party shall provide any compensation or other benefit to the other party’s employees without the prior written consent of such other party and each party hereto agrees to promptly disclose any financial relationships between it and any of the other party’s employees which may give rise to a conflict of interest between such employee and his employer.

(h) No right, express or implied, is granted to Seller hereunder to use in any manner any name, trade name, trademark or service mark of Buyer, and no right, express or implied, is granted to Buyer hereunder to use in any manner any name, trade name, trademark or service mark of Seller.

(i) If any court or other competent authority holds any provision of this Agreement to be void or unenforceable in whole or part, this Agreement shall continue to be valid as to the other provisions and the remainder of the affected provision.

(j) This Agreement may be executed in two or more counterparts, each of which shall be deemed an original and all of which together shall constitute one and the same instrument.

IN WITNESS WHEREOF, the parties hereto have duly executed this Agreement as of the day and year first above written.


(“Buyer”)		(“Seller”)
HENRY SCHEIN, INC		LASERSCOPE

By: Its:		By: Its: President and Chief Executive Officer
Date:		Date:

[**] Confidential or proprietary information redacted.

Exhibit A

Products

[**]

[**] Confidential or proprietary information redacted.

EX-31.1 3 f14264exv31w1.htm EXHIBIT 31.1 exv31w1

Exhibit 31.1

CERTIFICATIONS

I, Eric M. Reuter, certify that:

	1.		I have reviewed this quarterly report on Form 10-Q of Laserscope;

	2.		Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

	3.		Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

	4.		The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

	a)		Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

	b)		Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

	c)		Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

	d)		Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s board of directors (or persons performing the equivalent functions):

	a)		All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

	b)		Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: November 9, 2005



	/s/ Eric M. Reuter
	Eric M. Reuter
	Chief Executive Officer (Principal Executive Officer)

EX-31.2 4 f14264exv31w2.htm EXHIBIT 31.2 exv31w2

Exhibit 31.2

I, Derek Bertocci, certify that:

	1.		I have reviewed this quarterly report on Form 10-Q of Laserscope;

	2.		Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

	3.		Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

	4.		The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

	a)		Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

	b)		Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

	c)		Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

	d)		Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

	a)		All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

	b)		Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: November 9, 2005



	/s/ Derek Bertocci
	Derek Bertocci
	Chief Financial Officer (Principal Financial Officer)

EX-32.1 5 f14264exv32w1.htm EXHIBIT 32.1 exv32w1

Exhibit 32.1

CERTIFICATION OF PRINCIPAL EXECUTIVE OFFICER

PURSUANT TO 18 U.S.C. SECTION 1350

In connection with the Quarterly Report of Laserscope on Form 10-Q for the three months ended September 30, 2005, as filed with the Securities and Exchange Commission on the date hereof, I, Eric M. Reuter, President and Chief Executive Officer of Laserscope, hereby certify pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

	(1)		such Quarterly Report on Form 10-Q for the three months ended September 30, 2005 fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

	(2)		the information contained in such Quarterly Report on Form 10-Q for the three months ended September 30, 2005 fairly presents, in all material respects, the financial condition and results of operations of Laserscope.


Date: November 9, 2005	By:	/s/ Eric M. Reuter

		Eric M. Reuter
		President and Chief Executive Officer

EX-32.2 6 f14264exv32w2.htm EXHIBIT 32.2 exv32w2

Exhibit 32.2

CERTIFICATION OF PRINCIPAL FINANCIAL OFFICER

PURSUANT TO 18 U.S.C. SECTION 1350

In connection with the Quarterly Report of Laserscope on Form 10-Q for the three months ended September 30, 2005, as filed with the Securities and Exchange Commission on the date hereof, I, Derek Bertocci, Vice President, Finance and Chief Financial Officer of Laserscope, hereby certify pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

	(1)		such Quarterly Report on Form 10-Q for the three months ended September 30, 2005 fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

	(2)		the information contained in such Quarterly Report on Form 10-Q for the three months ended September 30, 2005 fairly presents, in all material respects, the financial condition and results of operations of Laserscope.


Date: November 9, 2005	By:	/s/ Derek Bertocci

		Derek Bertocci
		Vice President, Finance and
		Chief Financial Officer

-----END PRIVACY-ENHANCED MESSAGE-----

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents