SD

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM SD

SPECIALIZED DISCLOSURE REPORT

LINDSAY CORPORATION

(Exact name of registrant as specified in its charter)

Delaware	1-13419	47-0554096
(State or other jurisdiction of incorporation or organization)	(Commission File Number)	(I.R.S. Employer Identification No.)

2222 N 111th Street, Omaha, Nebraska	68164
(Address of principal executive offices)	(Zip Code)

Eric R. Arneson – (402) 827-6569

(Name and telephone number, including area code, of the person to contact in connection with this report)

Check the appropriate box to indicate the rule pursuant to which this form is being filed, and provide the period to which the information in this form applies:

x Rule 13p-1 under the Securities Exchange Act (17 CFR 240.13p-1) for the reporting period from January 1 to December 31, 2014.

Section 1 – Conflict Minerals Disclosure

Item 1.01 CONFLICT MINERALS DISCLOSURE AND REPORT

Lindsay Corporation (the “Company”, “Lindsay”, “we”, “us” or “our”), after exercising reasonable due diligence as required by Rule 13p-1, was unable to determine whether the tin, tantalum, tungsten and/or gold (“3TG” or “conflict minerals”) used in one or more of its products, where such 3TGs are necessary to such product(s) functionality or production, originated from the Democratic Republic of the Congo (“DRC”) or an adjoining country that shares an internationally recognized border with the DRC (the “Covered Region”). Accordingly, the Company declares itself to be “DRC conflict undeterminable” as defined by paragraph (d)(5) of the instructions to Item 1.01 for all products manufactured and/or contracted to be manufactured for the Company.

Conflict Minerals Disclosure

This Form SD and the Company’s Conflict Minerals Report, filed as Exhibit 1.01 hereto, may be found publicly on our internet website at http://www.lindsayir.com/Conflict_Minerals. The content of any website referenced in this Form SD is included for general information only and is not incorporated by reference in this Form SD.

Item 1.02 EXHIBIT

The Conflict Minerals Report required by Item 1.01 is filed as Exhibit 1.01 to this Form SD.

Section 2 – EXHIBITS

Item 2.01 EXHIBITS

Exhibit 1.01 – Conflict Minerals Report as required by Items 1.01 and 1.02 of this Form

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

Date: June 1, 2015	LINDSAY CORPORATION
	By: /s/ James C. Raabe
	James C. Raabe Vice President and Chief Financial Officer

EX-1.01

Exhibit 1.01

Lindsay Corporation

Conflict Minerals Report

For the Calendar Year Ended December 31, 2014

This is the Conflict Minerals Report of Lindsay Corporation (the “Company”, “Lindsay”, “we”, “us” or “our”) for calendar year 2014 in accordance with Rule 13p-1 (the “Rule”) under the Securities Exchange Act of 1934. The Rule was adopted by the Securities and Exchange Commission (SEC) to implement reporting and disclosure requirements related to conflict minerals as directed by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 (Dodd-Frank Act). The Rule imposes certain reporting obligations on SEC registrants whose manufactured products contain conflict minerals which are necessary to the functionality or production of their products. “Conflict minerals” are defined as cassiterite, columbite-tantalite, gold, wolframite, and their derivatives, which are limited to tin, tantalum and tungsten (together with gold, referred to as “3TG”) for the purposes of this assessment. These requirements apply to registrants whatever the geographic origin of the conflict minerals and whether or not they fund armed conflict.

If a registrant can establish that the conflict minerals originated from sources other than the Democratic Republic of the Congo (DRC) or an adjoining country, or from recycled and scrap sources, they must submit a Form SD which describes the Reasonable Country of Origin Inquiry completed. If a registrant has reason to believe that any of the conflict minerals in their supply chain may have originated in the DRC or an adjoining country, or if they are unable to determine the country of origin of those conflict minerals, then the registrant must exercise due diligence on the conflict minerals’ source and chain of custody and submit a Conflict Minerals Report to the SEC that includes a brief description of those due diligence measures.

In accordance with the instructions to Form SD, this Conflict Minerals Report has not been audited by an independent private sector auditor.

For terms not otherwise defined herein, please refer to Rule 13p-1 and SEC Release No. 34-67716 for such definitions.

1. Company Overview

Lindsay, along with its subsidiaries, is a global leader in providing a variety of proprietary water management and road infrastructure products and services. Lindsay’s common stock is traded on the New York Stock Exchange under the ticker symbol LNN. For more information regarding Lindsay, please visit our website at http://www.lindsay.com.

2. Products Overview

Lindsay has operations which are categorized into two major reporting segments; irrigation and infrastructure.

Irrigation Segment – Our irrigation segment includes the manufacture and marketing of center pivot, lateral move, and hose reel irrigation systems which are used principally in the agricultural industry to increase or stabilize crop production while conserving water, energy and labor. We also manufacture and market repair and replacement parts for our irrigation systems and controls, design and manufacture water pumping stations and controls for the agriculture, golf, landscape and municipal markets, and manufacture and distribute separators and filtration solutions for groundwater, agriculture, industrial and heat transfer markets. In January 2015, we acquired Elecsys Corporation, a provider of machine-to-machine (M2M) technology solutions and custom electronic systems.

Infrastructure Segment – Our infrastructure segment includes the manufacture and marketing of moveable barriers, specialty barriers, crash cushions and end terminals, road marking and road safety equipment, large diameter steel tubing, railroad signals and structures, and outsourced manufacturing services.

We determined that during the 2014 calendar year, we manufactured and sub-contracted to manufacture products containing 3TG and that the use of these minerals is necessary to the functionality or production of these products.

3. Supply Chain Overview

We rely upon our direct suppliers to provide information regarding the origin of 3TG contained in components and materials supplied to us. Generally, there are multiple tiers of suppliers between us and the mines from which the 3TG materials were mined. Accordingly, most of our suppliers must similarly conduct due diligence up the supply chain. We do not make purchases of raw ore or unrefined 3TG directly from mines, smelters or refiners. The methods we used to try to determine the origin of 3TG in our products included:

• sending letters to our direct suppliers, explaining the rule and referring the suppliers to online training materials and instructions;

• soliciting information from relevant suppliers of components and materials utilized in our products, using the standard Conflict Minerals Reporting Template designed by the Electronic Industry Citizenship Coalition (EICC) and the Global e-Sustainability Initiative (GeSI);

• reviewing responses that we received from our suppliers and following up on information that appeared to be incomplete, incorrect or not trustworthy; and

• sending multiple reminders to suppliers who did not respond to our requests for information and ultimately engaging in a telephone campaign to contact those suppliers who remained non-responsive.

We engaged a third party service provider, Source Intelligence, to assist with the collection, review and evaluation of information regarding the presence and sourcing of 3TG materials used in our products.

4. Reasonable Country of Origin Inquiry (RCOI) and RCOI conclusion

We conducted an analysis of our products and found that 3TG can be found in some of our products and are necessary to the functionality or production of those products. Therefore, we are subject to the reporting obligations of Rule 13p-1.

We conducted, with the assistance of Source Intelligence, a survey of our suppliers using the EICC/GeSI Conflict Minerals Reporting Template. The template was developed to facilitate disclosure and communication of information regarding smelters that provide material to a company’s supply chain. It includes questions regarding a company’s conflict-free policy, engagement with its direct suppliers, and a listing of the smelters the company and its suppliers use. In addition, the template contains questions about the origin of conflict minerals included in their products, as well as supplier due diligence. This template is being widely adopted by many companies in their due diligence processes related to conflict minerals.

Despite having conducted a good faith reasonable country of origin inquiry and due diligence process, we have been unable to reliably determine the origin of all 3TG within our products. Due to the complexity of our products and supply chain, it will take time for many of our suppliers to verify the origin of all of the minerals. Using our supply chain due diligence processes, we hope to further develop transparency into our supply chain.

5. Conflict Minerals Status Analysis and Conflict Status Conclusion

We have concluded that our supply chain remains “DRC conflict undeterminable.” We reached this conclusion because we have been unable to determine the origin of the 3TG used in our products.

6. Due Diligence Program

6.1. Conflict Minerals Policy

Our policy with respect to the sourcing of conflict minerals may be found publicly on our internet website at http://www.lindsayir.com/Conflict_Minerals.

6.2. Due Diligence Process

Our due diligence processes and efforts have been developed in conjunction with Annex I of the second edition of the Organization for Economic Co-operation and Development (OECD) Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas (OECD Guidance) and the related supplements for gold and for tin, tantalum and tungsten. As described above, our efforts include utilization of the EICC/GeSI Conflict Minerals Reporting Template as part of our supply chain diligence process.

Our conflict minerals due diligence process includes: the development of a Conflict Minerals Policy, establishment of governance structures with cross functional team members and senior executives, communication with suppliers, due diligence compliance process and measurement, record keeping and escalation procedures. Senior management is briefed about the results of our due diligence efforts on a regular basis. As mentioned above, we engaged Source Intelligence, a third party service provider, to assist with our due diligence process. Supplier information was collected, stored and evaluated using an online platform provided by Source Intelligence.

6.3. Steps to Be Taken to Mitigate Risk and Maturing Due Diligence Program

As we work on improving our due diligence program, we intend to enhance our supplier communication and to improve our due diligence data accuracy in order to mitigate the risk that the necessary 3TG contained in our products could benefit armed groups in the DRC or adjoining countries.

7. Identify and Assess Risk in the Supply Chain

Because of our size, the breadth and complexity of our products, and the constant evolution of our supply chain, it is difficult to identify parties upstream from our direct suppliers. Our direct suppliers are similarly reliant upon information provided by their suppliers.

At the outset of our reasonable country of origin inquiry, we elected to survey and send letters to a broad group of direct suppliers for our products, including many which are likely out-of-scope for this analysis. The response rate among those suppliers was 26%. Of the responding suppliers, 63% indicated one or more of the regulated metals (3TG) as necessary to the functionality or production of the products they supply to us. Based on the CMRT responses and Source Intelligence’s smelter/refiner database, there was an indication of sourcing from the DRC or adjoining countries for 36 out of 363 verified smelters and refiners. Information regarding those smelters and refiners is included as Annex 1 to this report. Of the 36 smelters and refiners sourcing from the DRC or adjoining countries, 32 have been verified as conflict-free, two are progressing toward certification through the Conflict-Free Sourcing Initiative (CFSI) and two are not currently participating in a certification program.

8. Audit of Supply Chain Due Diligence

We do not have a direct relationship with 3TG smelters and refiners, nor do we perform direct audits of the other entities in our supply chain. However, we do rely upon industry efforts to influence smelters and refineries to participate in the EICC/GeSI Conflict-Free Smelter Program and on the results of this program.

9. Continuous Improvement Efforts to Mitigate Risk

The due diligence process discussed above is an ongoing process. As we continue to conduct due diligence on our products, we will continue to refine our procedures to meet the goals set forth above. We intend to undertake the following next steps to improve the due diligence process and to gather additional information which will assist us to determine whether the 3TG we utilize benefit armed groups contributing to human rights violations:

• continue to improve our threshold analysis as to whether 3TG materials are necessary to the functionality or production of our manufactured products to better focus diligence efforts on in-scope suppliers;

• continue to work with suppliers who provided incomplete or insufficient information in an effort to obtain complete and accurate information in future years;

• continue to conduct and report annually on supply chain due diligence for the applicable conflict minerals;

• examine the possibility of including a conflict minerals clause in our supplier contracts and purchase order terms and conditions; and

• attempt to validate supplier responses using information collected via independent conflict free smelter validation programs such as the EICC/GeSI Conflict Free Smelter Program.

Forward-Looking Statements

This Report contains forward-looking statements within the meaning of the federal securities laws. Any statements that do not relate to historical or current or matters are forward-looking statements. You can identify some of the forward-looking statements by use of forward-looking words, such as “intend” and the like, or the use of future tense. Statements concerning current conditions may also be forward-looking if they imply a continuation of current conditions. Examples of forward-looking statements include, but are not limited to, statements concerning the Company’s intended future efforts to mitigate the risk that the manufacture of its products benefits arms groups in the DRC region.

Forward-looking statements are subject to risks and uncertainties that could cause actual actions or performance to differ materially from those expressed in the forward-looking statements. These risks and uncertainties may include, but are not limited to, the implementation of satisfactory traceability and other compliance measures by our direct and indirect suppliers, on a timely basis or at all, whether smelters and refiners and other market participants responsibly source 3TG and political and regulatory developments, whether in the DRC region, the United States, or elsewhere. You are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of filing of this document. We do not intend, and undertake no obligation, to publish revised forward-looking statements to reflect events or circumstances after the date of filing of this document or to reflect the occurrence of unanticipated events.

Annex 1

The following table lists smelters and refiners with indications of sourcing from the DRC and adjoining countries and their certification status.

Metal	Smelter/Refiner	Certification Status	Mine Countries of Origin
GOLD	CCR Refinery - Glencore Canada Corporation	CFSI - Gold, LBMA	Canada, Japan, Australia, United States, Peru, Chile, Germany, DRC- Congo (Kinshasa), Switzerland, Argentina, Zambia
GOLD	China Nonferrous Metal Mining (Group) Co., Ltd.		China, Kyrgyzstan, Tajikistan, Zambia
GOLD	Rand Refinery (Pty) Ltd	CFSI - Gold, LBMA	China, Canada, South Africa, DRC- Congo (Kinshasa), Hong Kong, Namibia, Guinea, Mali, Ghana, Tanzania
TANTALUM	Conghua Tantalum and Niobium Smeltry	CFSI - Tantalum	China, Brazil, Thailand, Rwanda, Ethiopia, India, Niger
TANTALUM	Duoluoshan Sapphire Rare Metal Co., Ltd.	CFSI - Tantalum	China, Brazil, Japan, Bolivia, Malaysia, Thailand, Rwanda, Ethiopia, India, Niger, Nigeria
TANTALUM	H.C. Starck Co., Ltd.	CFSI - Tantalum	Brazil, Australia, Bolivia, Thailand, Rwanda, Mozambique, Ethiopia, India, Namibia, Zimbabwe, Sierra Leone
TANTALUM	H.C. Starck GmbH Goslar	CFSI - Tantalum	China, Canada, Brazil, Japan, Australia, United States, Bolivia, Thailand, Germany, Rwanda, Mozambique, Ethiopia, India, Namibia, Zimbabwe, Sierra Leone
TANTALUM	H.C. Starck GmbH Laufenburg	CFSI - Tantalum	China, Canada, Brazil, Japan, Australia, Bolivia, Germany, Rwanda, Mozambique, Ethiopia, India, Namibia, Zimbabwe, Sierra Leone
TANTALUM	H.C. Starck Hermsdorf GmbH	CFSI - Tantalum	China, Canada, Brazil, Japan, Australia, Bolivia, Germany, Rwanda, Mozambique, Ethiopia, India
TANTALUM	H.C. Starck Inc.	CFSI - Tantalum	China, Canada, Brazil, Japan, Australia, United States, Bolivia, Germany, Rwanda, Mozambique, Ethiopia, India, Namibia, Zimbabwe, Sierra Leone
TANTALUM	H.C. Starck Ltd.	CFSI - Tantalum	China, Canada, Brazil, Japan, Australia, Bolivia, Germany, Rwanda, Mozambique, Ethiopia, India, Namibia, Zimbabwe, Sierra Leone
TANTALUM	Hi-Temp Specialty Metals, Inc.	CFSI - Tantalum	China, Brazil, Australia, United States, Bolivia, Rwanda, Mozambique, Ethiopia, India, Namibia, Zimbabwe, Sierra Leone
TANTALUM	Jiujiang Tanbre Co., Ltd.	CFSI - Tantalum	China, DRC- Congo (Kinshasa)
TANTALUM	KEMET Blue Metals	CFSI - Tantalum	Mexico, Rwanda, Mozambique, Niger, Nigeria, Burundi

Metal	Smelter/Refiner	Certification Status	Mine Countries of Origin
TANTALUM	Kemet Blue Powder	CFSI - Tantalum	China, United States, DRC- Congo (Kinshasa), Mexico, Rwanda, Mozambique, Niger, Nigeria, Burundi
TANTALUM	Ningxia Orient Tantalum Industry Co., Ltd.	CFSI - Tantalum	China, Brazil, Australia, Malaysia, Rwanda, Mozambique, Switzerland, Ethiopia, Niger, Nigeria, Burundi
TANTALUM	Ulba	CFSI - Tantalum	China, Canada, Brazil, Japan, Australia, United States, Russia, DRC- Congo (Kinshasa), Rwanda, Mozambique, Ethiopia, Kazakhstan, Zimbabwe, Burundi, Belarus
TANTALUM	Zhuzhou Cement Carbide	CFSI - Tantalum	China, Brazil, Japan, Russia, Malaysia, DRC- Congo (Kinshasa), Rwanda, Kazakhstan, Niger, Nigeria, Burundi
TIN	Minsur	CFSI - Tin	China, Canada, Brazil, Indonesia, United States, Peru, Bolivia, Malaysia, Thailand, DRC- Congo (Kinshasa), Rwanda, Switzerland
TIN	PT Timah (Persero), Tbk	CFSI - Tin	China, Canada, Brazil, Indonesia, Peru, Bolivia, Malaysia, Thailand, DRC- Congo (Kinshasa), India
TIN	Malaysia Smelting Corporation (MSC)	CFSI - Tin	China, Canada, Brazil, Japan, Australia, Indonesia, Peru, Bolivia, Malaysia, Chile, Thailand, DRC- Congo (Kinshasa), Rwanda, Switzerland, Portugal, Spain, Niger, Nigeria
TIN	China Tin Group Co., Ltd.	CFSI - Active - Tin	China, Canada, Brazil, Japan, Australia, DRC- Congo (Kinshasa)
TIN	Yunnan Tin Company Limited	CFSI - Tin	China, Canada, Brazil, Australia, Indonesia, Peru, Bolivia, Malaysia, Germany, DRC- Congo (Kinshasa), Hong Kong, Ethiopia, Belgium, Angola
TIN	CV United Smelting	CFSI - Tin	China, Japan, Indonesia, Peru, Malaysia, DRC- Congo (Kinshasa)
TIN	Empresa Metallurgica Vinto	CFSI - Tin	China, Canada, Brazil, Indonesia, Peru, Russia, Bolivia, Malaysia, Germany, DRC- Congo (Kinshasa)
TIN	Metallo Chimique	CFSI - Tin	China, Peru, Russia, Malaysia, Thailand, DRC- Congo (Kinshasa), Belgium
TIN	Operaciones Metalurgical S.A.	CFSI - Tin	China, Canada, Brazil, Japan, Indonesia, Peru, Russia, Bolivia, Malaysia, Thailand, DRC- Congo (Kinshasa)
TIN	PT Bangka Putra Karya	CFSI - Tin	China, Canada, Brazil, Indonesia, Peru, Bolivia, Malaysia, DRC- Congo (Kinshasa)
TIN	PT Bukit Timah	CFSI - Tin	China, Canada, Brazil, Australia, Indonesia, Peru, Russia, Bolivia, Malaysia, DRC- Congo (Kinshasa)
TIN	PT Pelat Timah Nusantara Tbk		China, Brazil, Indonesia, Bolivia, Malaysia, DRC- Congo (Kinshasa), Rwanda, Niger, Nigeria, Burundi

Metal	Smelter/Refiner	Certification Status	Mine Countries of Origin
TIN	PT Stanindo Inti Perkasa	CFSI - Tin	China, Canada, Brazil, Australia, Indonesia, Peru, Bolivia, Malaysia, DRC- Congo (Kinshasa), Mozambique
TIN	Thaisarco	CFSI - Tin	China, Canada, Brazil, Japan, Australia, Indonesia, Peru, Bolivia, Malaysia, Chile, Thailand, DRC- Congo (Kinshasa), Rwanda, Portugal, Poland, Morocco, Myanmar
TUNGSTEN	H.C. Starck GmbH	CFSI- Progressing - Tungsten	China, Canada, Brazil, Japan, Australia, United States, Peru, Russia, Bolivia, Thailand, Germany, Rwanda, Mozambique, Ethiopia, India, Portugal, Spain, Namibia, Zimbabwe, Sierra Leone, Estonia