UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington , D.C. 20549
FORM
CURRENT REPORT
Pursuant to Section 13 or 15(d) of
the Securities Exchange Act of 1934
Date of Report (Date of earliest event reported): September 7, 2022, (
(Exact name of registrant as specified in its charter)
Commission file number:
(State or other jurisdiction | (IRS Employer |
(Address of principal executive offices) | (Zip Code) |
(
Registrant’s telephone number, including area code
Not Applicable
(Former name or former address, if changed since last report.)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) |
Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) |
Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) |
Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Securities registered pursuant to Section 12(b) of the Act:
Title of each class | Trading Symbol(s) | Name of each exchange on which registered | ||
OTCQB |
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (17 CFR 230.405) or Rule 12b-2 of the Exchange Act of 1934 (17 CFR 240.12b2).
Emerging growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
ITEM 8.01Other Events
On September 7, 2022, SCI Engineered Materials, Inc. (“SCI”), announced completion of the installation of a new vacuum hot press.
This addition to SCI’s production capabilities enhances the Company’s product portfolio. The hot press has a maximum pressure rating of 75 tons and operates up to 2400 degrees Celsius, which enables the manufacture of targets utilizing diverse precious metal materials. Each planar target can be manufactured up to 18 inches in diameter with multiple nitrogen purge cycles that ensure minimal oxygen content. Inert or forming gases can also be introduced at any pressure during the production cycle. The hot press has a retractable work thermocouple for lower temperature operations up to 1100 degrees Celsius. At higher temperature requirements, a controller receives production data from a pyrometer ensuring accurate and repeatable runs. It can also run hydraulics and heat from one profile while recording all available data. Additional diagnostic and operating capabilities enable remote monitoring of production runs and related issues.
Jeremy, Young, President and CEO, commented, “The new vacuum hot press further strengthens SCI’s manufacturing footprint and increases our product offerings through a wider range of targets utilizing precious metals. It is particularly useful for materials requiring higher temperatures throughout the production process. This equipment was ordered during the first quarter of 2021, reflecting ongoing challenges related to supply chain issues. The installed cost for the hot press was approximately $500,000 which was paid in cash. We recently launched marketing initiatives through direct contact and multi-platform online initiatives to create awareness of our increased capabilities among current and prospective customers.”
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
SCI ENGINEERED MATERIALS, INC.
September 7, 2022 | By: | /s/ Gerald S. Blaskie |
Gerald S. Blaskie | ||
Vice President and Chief Financial Officer | ||
Document and Entity Information |
Sep. 07, 2022 |
|---|---|
| Document and Entity Information [Abstract] | |
| Document Type | 8-K |
| Amendment Flag | false |
| Document Period End Date | Sep. 07, 2022 |
| Entity File Number | 0-31641 |
| Entity Registrant Name | SCI ENGINEERED MATERIALS, INC. |
| Entity Central Index Key | 0000830616 |
| Entity Incorporation, State or Country Code | OH |
| Entity Tax Identification Number | 31-1210318 |
| Entity Address, Address Line One | 2839 Charter Street |
| Entity Address State Or Province | OH |
| Entity Address, City or Town | Columbus |
| Entity Address, Postal Zip Code | 43228 |
| City Area Code | 614 |
| Local Phone Number | 486-0261 |
| Title of 12(b) Security | Common stock, without par value |
| Trading Symbol | SCIA |
| Written Communications | false |
| Soliciting Material | false |
| Pre-commencement Tender Offer | false |
| Pre-commencement Issuer Tender Offer | false |
| Entity Emerging Growth Company | false |