6-K

UNITED STATESSECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

________________________

FORM 6-K

REPORT OF FOREIGN ISSUERPURSUANT TO RULE 13a-16 OR 15d-16 OF THE SECURITIES EXCHANGE ACT OF 1934

For the month of March 2018

________________________

TAT TECHNOLOGIES LTD.

(Translation of registrant’s name into English)

________________________

P.O.BOX 80, Gedera 70750 Israel

(Address of registrant’s principal executive office)

________________________

Indicate by check mark whether the registrant files or will file annual reports under cover Form 20-F or Form 40-F.

Form 20-F ý             Form 40-F ☐

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101 (b) (1): ☐

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101 (b) (7): ☐

Indicate by check mark whether the registrant by furnishing the information contained in this Form is also thereby furnishing the information to the Commission pursuant to Rule 12g3-2(b) under the Securities Exchange Act of 1934.

Yes ☐            No ý

If “Yes” is marked, indicate below the file number assigned to the registrant in connection with Rule 12g3-2(b): 82- ____________

TAT Technologies Ltd.

6-K Items

99.1 Company Investor Presentation – March 2018

About TAT Technologies LTD

TAT Technologies Ltd. is a leading provider of services and products to the commercial and military aerospace and ground defense industries. TAT operates under four segments: (i) Original equipment manufacturing (“OEM”) of heat transfer solutions and aviation accessories through its Gedera facility; (ii) MRO services for heat transfer components and OEM of heat transfer solutions through its Limco subsidiary; (iii) MRO services for aviation components through its Piedmont subsidiary; and (iv) Overhaul and coating of jet engine components through its Turbochrome subsidiary.

TAT’s activities in the area of OEM of heat transfer solutions and aviation accessories primarily include the design, development and manufacture of (i) broad range of heat transfer solutions, such as pre-coolers heat exchangers and oil/fuel hydraulic heat exchangers, used in mechanical and electronic systems on board commercial, military and business aircraft; (ii) environmental control and power electronics cooling systems installed on board aircraft in and ground applications; and (iii) a variety of other mechanical aircraft accessories and systems such as pumps, valves, and turbine power units.

TAT’s activities in the area of MRO Services for heat transfer components and OEM of heat transfer solutions primarily include the MRO of heat transfer components and to a lesser extent, the manufacturing of certain heat transfer solutions. TAT’s Limco subsidiary operates an FAA-certified repair station, which provides heat transfer MRO services for airlines, air cargo carriers, maintenance service centers and the military.

TAT’s activities in the area of MRO services for aviation components include the MRO of APUs, landing gears and other aircraft components. TAT’s Piedmont subsidiary operates an FAA-certified repair station, which provides aircraft component MRO services for airlines, air cargo carriers, maintenance service centers and the military.

TAT’s activities in the area of overhaul and coating of jet engine components includes the overhaul and coating of jet engine components, including turbine vanes and blades, fan blades, variable inlet guide vanes and afterburner flaps.

For more information of TAT Technologies Ltd., please visit our web-site:www.tat-technologies.com

Contact:

Mr. Guy Nathanzon

CFO

Tel: +972-8-8628500

guyn@tat-technologies.com

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereto duly authorized.

TAT TECHNOLOGIES LTD.           (Registrant)
By:	/s/ Guy Nathanzon
	Guy Nathanzon
	Chief Financial Officer

Date: March 29, 2018

EX-99.1

Exhibit 99.1

 TAT Technologies  Corporate Presentation March 2018 

 Forward Looking Statements  This presentation may contain certain forward-looking statements within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. Generally, the words “expects,” “anticipates,” “targets,” “goals,” “projects,” “intends,” “plans,” “believes,” “seeks,” “estimates,” variations of such words and similar expressions identify forward-looking statements and any statements regarding TAT’s future financial condition, results of operations and business are also forward-looking statements. These forward-looking statements involve certain risks and uncertainties. Factors that could cause actual results to differ materially from those contemplated by the forward-looking statements include, among others, the following factors: continued compliance with government regulations; competition in the industry in which TAT does business; TAT’s business strategy and plans; exchange rate fluctuations; general economic conditions; and political, economic and military conditions in Israel.Any forward-looking statements in this presentation are not guarantees of future performance, and actual results, developments and business decisions may differ from those contemplated by those forward-looking statements, possibly materially. Except as otherwise required by applicable law, TAT disclaims any duty to update any forward-looking statements.Additional discussions of risks and uncertainties that may affect the accuracy of forward-looking statements included in this presentation or which may otherwise affect TAT’s business is included under the heading “RISK FACTORS” in TAT’s filings on Forms 20-F and 6-K, which are filed from time to time. 

 Investment Highlights    TAT is a leading provider of heat management solutions, related accessories andservices for the aerospace and defense industries. Target marketsDesign and Manufacturing (OEM)Heat management solutions: components and systemsMaintenance, repair and overhaul (MRO)Heat management solutions, APU, landing gears, jet engines blades 

             Founded in 1969Acquired Limco in 1993Acquired Piedmont in 2005Acquired Turbochrome in 2015  > 500 customers (Boeing, Lockheed Martin, Airbus, Embraer …)   More than 600 employees in 4 locations: Gadera and Kiryat Gat, IsraelTulsa, Oklahoma, USAKernersville, North Carolina, USA   NASDAQ and Tel Aviv stock exchange traded (Ticker: TATT)  59.5% held by Fimi Opportunity Funds  TAT Group – Key Facts  Revenue: 2016: $ 95.8M2017: $ 106.5M 

 TAT Group –Senior Management    In position since June 2016Former Head of the Israeli Defense Intelligence and Commander of the IDF Ground Forces Command. Retired in 2002Founder and Chairman of Spire Security Solutions Ltd. and Nyotron Information Security LtdPrior positions:2007-2015: Chairman of the Board of Logic Industries Ltd2007-2010: Chairman of the Board of Plasan Sasa Ltd2002-2005: CEO Elul Technologies Ltd  Amos Malka  Chairman of the Board    In position since April 2016Prior experience: President – Mapco Express (subsidiary of Delek US Holdings Inc)CEO – Metrolight LtdCEO – Rostam Ltd (acquired by Albaad Massout Yitzhak Ltd)  Igal Zamir  President & CEO    In position since July 2015Prior experience:CFO– Altair-Semiconductors CFO – Provigent - acquired by Broadcom (NASDAQ: BRCM)Senior auditor - PwC   Guy Nathanzon  CFO 

   Aviation Industry – Market Trends     

 1.  Target Markets   Design and manufacturing of heat management components Heat exchangersCold platesOil CoolersFuel submerged HX 

 Hydraulic Systems Fuel Submerged Oil Cooler Air Cooled Oil Cooler  Component Locations  Power ElectronicsCold Plates (Weather Radars + Avionics+ Entertainment)Heat Exchangers (Same)  APU Oil Cooler  EngineOil Cooler  Galley Auxiliary HX Chillers              Air SystemsPre-cooler (Bleed Air System)Emergency HX (Bleed Air System/ECS)Condenser (ECS)Reheater (ECS)Dual Heat Exchanger (ECS)Humidifier (Humidification System)Ozone Converter (ECS)Water Extractor (ECS)       

 Component Locations    Hydraulic Systems Oil Cooler  Engine Oil Cooler  Main Gearbox Oil Cooler     

 Target Markets   Design and manufacturing of heat management systems From components to system levelPECS: power electronics cooling systemsAir Conditioning Systems   2. 

 3.  Target Markets   Design and manufacturing of fuel flow accessoriesFuel valvesSolenoid valvesFuel control valvesFuel pumps 

 4.  Target Markets   Maintenance, repair and overhaul (MRO) Heat Exchangers APU Landing gearsJet engines blades  

 Commercial Platforms  Airbus A300, A310, A319, A320, A321, A330  Bombardier CRJ   ATR 42, 72   PilatusPC-12  Boeing 737, 747, 767, 777  SukhoiSuper Jet  CessnaCJ-3, CJ-4, Citation-X, Caravan  EmbraerERJ145, ERJ170, ERJ190 

 Defense Platforms  BoeingF-15  Boeingv22  BoeingF-18  BoeingCH-47  BoeingAH-64  Iron Dome  SikorskyUH-60  SikorskyCH-53  Lockheed MartinF-16 

         Service centers          Air Forces  Customer Base          Air Lines          OEM 

 Strength / Differentiators    Over 40 years of experience – proven competence in demanding aerospace world            Technology    Unique manufacturing capabilities – 4 facilities world wide, including dip brazing and vacuum brazing, EBW            Manufacturing Expertise    FAA, EASA, AS9100, Honeywell authorized repair center for APUs            Customers Relationships and Certifications 

 Capabilities and Expertise      CertificationsAS 9100ISO 9001Preferred Supplier for: Boeing, Lockheed MartinAviation Authorities Certifications: FAA, EASA, DGAC, Thai, CAAV, NADCAP   Authorized Repair Station – Honeywell           

 Growth Drivers  Going upstream in the chain (from components to systems)Enter into new platforms – aviation and groundMaintenance, repair and overhaul (MRO) of new parts Organic growth and acquisitionsExpand to new territories: Eastern Europe, Asia, UK etc 

 Revenue Trend 

 Revenue Trend 

 2017  2016  2015  2014  2013  2012  $ Millions   106.5  95.8  85.6  80.7  79.6  77.9  Revenue  20.4  19.0  13.7  16.2  17.8  18.5  Gross Profit  19.2%  19.9%  16.0%  20.1 %  22.4%  23.7%  Gross Margin  5.3  4.1  5.6  3.8  5.3  5.4  Operating Income  5.0%  4.3%  6.5%  4.7%  6.7%  6.9%  Operating Margin  2.4  0.1  5.8  1.4  2.8  -1.7  Net Income (loss)  9.4  7.9  3.6  5.9  7.2  7.3  EBITDA  8.8%  8.2%  4.2%  7.3%  9.0%  9.4%  EBITDA %  Financial Results - Annual  (*) During 2016 the Company had $ 2.7 million tax expenses related to distribution of dividends from foreign subsidiaries (**) During 2015 the company had $ 4.8 million gain on bargain purchase related to acquisition 

 Financial Results - Quarterly  Q4’17  Q3’17  Q2’17  Q1’17  Q4’16  Q3’16  Q2’16  Q1’16  $ Millions   26.3  26.6  26.5  27.1  25.0  23.7  23.5  23.6  Revenue  4.8  5.1  5.0  5.6  5.8  4.9  4.4  3.9  Gross Profit  18.3%  19.2%  18.8%  20.7%  23.3%  20.7%  18.6%  16.7%  Gross Margin  0.6  1.5  1.3  1.9  2.1  1.5  0.3  0.3  Operating Income  2.3%  5.6%  4.9%  7.0%  8.4%  6.3%  1.3%  1.3%  Operating Margin  (0.3)  0.8  0.6  1.2  1.6  0.9  -2.5  0.04  Net Income (loss)  1.6  2.5  2.4  2.9  3.1  2.5  1.2  1.1  EBITDA  6.1%  9.4%  9.0%  10.7%  12.3%  10.2%  5.1%  4.7%  EBITDA %  (*) Following a periodic assessment of its long-term projects, the Company updated its estimates of profits expected to be earned from certain long-term contract. This assessment resulted in a decrease in revenues for the first quarter of 2017 in an amount of $0.5 million and a decrease of $0.4 million in net income 

 Strong Balance Sheet  2017  2016  2015  2014  2013  $ Millions   18.0  22.4  26.8  28.0  29.9  Cash And Deposits  67.0  66.7  70.8  70.8  73.8  Working Capital  112.0  112.0  109.6  99.2  108.9  Total Assets  0.0  0.0  0.0  0.0  0.9  Debt  88.6  88.7  91.4  85.5  85.6  Equity  (*) During 2016 and during 2017 the company has distributed a cash dividend of $3.0 million 

 Dividend Distribution History  Total  2017  2016  2015  2014  2013  2012  2011  2010  2009  2008  2007  2006  $ Millions   20.6  3.0  3.0  -  2.0  -  2.5  -  -  6.3  -  2.6  1.2  Cash Dividend