Commitments and Contingencies	9 Months Ended
Sep. 30, 2018
Commitments and Contingencies
Commitments and Contingencies	NOTE 14. Commitments and Contingencies Legal Proceedings: The Company and some of its subsidiaries are involved in numerous claims and lawsuits, principally in the United States, and regulatory proceedings worldwide. These include various products liability (involving products that the Company now or formerly manufactured and sold), intellectual property, and commercial claims and lawsuits, including those brought under the antitrust laws, and environmental proceedings. Unless otherwise stated, the Company is vigorously defending all such litigation. Additional information about the Company’s process for disclosure and recording of liabilities and insurance receivables related to legal proceedings can be found in Note 15 “Commitments and Contingencies” in the Company’s Annual Report on Form 10-K for the year ended December 31, 2017 as updated by the Company’s Current Report on Form 8-K dated May 8, 2018. The following sections first describe the significant legal proceedings in which the Company is involved, and then describe the liabilities and associated insurance receivables the Company has accrued relating to its significant legal proceedings. Respirator Mask/Asbestos Litigation As of September 30, 2018, the Company is a named defendant, with multiple co-defendants, in numerous lawsuits in various courts that purport to represent approximately 2,255 individual claimants, compared to approximately 2,230 individual claimants with actions pending at December 31, 2017. The vast majority of the lawsuits and claims resolved by and currently pending against the Company allege use of some of the Company’s mask and respirator products and seek damages from the Company and other defendants for alleged personal injury from workplace exposures to asbestos, silica, coal mine dust or other occupational dusts found in products manufactured by other defendants or generally in the workplace. A minority of the lawsuits and claims resolved by and currently pending against the Company generally allege personal injury from occupational exposure to asbestos from products previously manufactured by the Company, which are often unspecified, as well as products manufactured by other defendants, or occasionally at Company premises. The Company’s current volume of new and pending matters is substantially lower than it experienced at the peak of filings in 2003. The Company expects that filing of claims by unimpaired claimants in the future will continue to be at much lower levels than in the past. Accordingly, the number of claims alleging more serious injuries, including mesothelioma and other malignancies, will represent a greater percentage of total claims than in the past. The Company has prevailed in thirteen of the fourteen cases taken to trial, including eleven of the twelve cases tried to verdict (such trials occurred in 1999, 2000, 2001, 2003, 2004, 2007, 2015, and the cases tried in 2016, 2017, and 2018-described below), and an appellate reversal in 2005 of the 2001 jury verdict adverse to the Company. The remaining case, tried in 2009, was dismissed by the court at the close of plaintiff’s evidence, based on the court’s legal finding that the plaintiff had not presented sufficient evidence to support a jury verdict. In August 2016, 3M received a unanimous verdict in its favor from a jury in state court in Kentucky, in 3M’s first respirator trial involving coal mine dust. The estate of the plaintiff alleged that the 3M 8710 respirator is defective and caused his death because it did not protect him from harmful coal mine dust. The jury rejected plaintiff’s claim and returned a verdict finding no liability against 3M. The verdict is final as the plaintiff did not file an appeal. In September 2017, 3M received a unanimous verdict in its favor from a jury in state court in Kentucky in 3M’s second respirator trial involving coal mine dust. The jury ultimately determined that the plaintiff’s claims were barred by the statute of limitations. In November 2017, the court denied the plaintiff’s motion for a new trial. The plaintiff did not file an appeal, thereby ending the litigation. In February 2018, 3M received a verdict in its favor from a jury in state court in California. The plaintiff alleged that the 3M 8710 respirator was defective and caused his mesothelioma because it did not protect him from asbestos fibers. The jury rejected plaintiff’s claim and returned a verdict finding no liability against 3M. In April 2018, a jury in state court in Kentucky found 3M’s 8710 respirators failed to protect two coal miners from coal mine dust and awarded aggregate compensatory damages of approximately $2 million and punitive damages totaling $63 million. In August 2018, the trial court entered judgment and the Company has appealed. The Company believes liability in this case is not probable and estimable. In June 2018, the Company also settled a number of coal mine dust lawsuits for an amount that was not material to the Company. The Company has demonstrated in these past trial proceedings that its respiratory protection products are effective as claimed when used in the intended manner and in the intended circumstances. Consequently, the Company believes that claimants are unable to establish that their medical conditions, even if significant, are attributable to the Company’s respiratory protection products. Nonetheless the Company’s litigation experience indicates that claims of persons with malignant conditions are costlier to resolve than the claims of unimpaired persons, and it therefore believes the average cost of resolving pending and future claims on a per-claim basis will continue to be higher than it experienced in prior periods when the vast majority of claims were asserted by medically unimpaired claimants. As previously reported, the State of West Virginia, through its Attorney General, filed a complaint in 2003 against the Company and two other manufacturers of respiratory protection products in the Circuit Court of Lincoln County, West Virginia, and amended its complaint in 2005. The amended complaint seeks substantial, but unspecified, compensatory damages primarily for reimbursement of the costs allegedly incurred by the State for worker’s compensation and healthcare benefits provided to all workers with occupational pneumoconiosis and unspecified punitive damages. The case was inactive from the fourth quarter of 2007 until late 2013, other than a case management conference in March 2011. In November 2013, the State filed a motion to bifurcate the lawsuit into separate liability and damages proceedings. At the hearing on the motion, the court declined to bifurcate the lawsuit. No liability has been recorded for this matter because the Company believes that liability is not probable and estimable at this time. In addition, the Company is not able to estimate a possible loss or range of loss given the lack of any meaningful discovery responses by the State of West Virginia, the otherwise minimal activity in this case and the fact that the complaint asserts claims against two other manufacturers where a defendant’s share of liability may turn on the law of joint and several liability and by the amount of fault, if any, a jury might allocate to each defendant if the case is ultimately tried. Respirator Mask/Asbestos Liabilities and Insurance Receivables: The Company regularly conducts a comprehensive legal review of its respirator mask/asbestos liabilities. The Company reviews recent and historical claims data, including without limitation, (i) the number of pending claims filed against the Company, (ii) the nature and mix of those claims (i.e., the proportion of claims asserting usage of the Company’s mask or respirator products and alleging exposure to each of asbestos, silica, coal or other occupational dusts, and claims pleading use of asbestos-containing products allegedly manufactured by the Company), (iii) the costs to defend and resolve pending claims, and (iv) trends in filing rates and in costs to defend and resolve claims, (collectively, the “Claims Data”). As part of its comprehensive legal review, the Company regularly provides the Claims Data to a third party with expertise in determining the impact of Claims Data on future filing trends and costs. The third party assists the Company in estimating the costs to defend and resolve pending and future claims. The Company uses these estimates to develop its best estimate of probable liability. Developments may occur that could affect the Company’s estimate of its liabilities. These developments include, but are not limited to, significant changes in (i) the key assumptions underlying the Company’s accrual, including, the number of future claims, the nature and mix of those claims, the average cost of defending and resolving claims, and in maintaining trial readiness (ii) trial and appellate outcomes, (iii) the law and procedure applicable to these claims, and (iv) the financial viability of other co-defendants and insurers. As a result of the Company’s review of its respirator mask/asbestos liabilities and as a result of the cost of resolving claims of persons who claim more serious injuries, including mesothelioma and other malignancies, the Company increased its accruals in the first nine months of 2018 for respirator mask/asbestos liabilities by $56 million. In the first nine months of 2018, the Company made payments for legal fees and settlements of $64 million related to the respirator mask/asbestos litigation. As of September 30, 2018, the Company had an accrual for respirator mask/asbestos liabilities (excluding Aearo accruals) of $600 million. This accrual represents the Company’s best estimate of probable loss and reflects an estimation period for future claims that may be filed against the Company approaching the year 2050. The Company cannot estimate the amount or upper end of the range of amounts by which the liability may exceed the accrual the Company has established because of the (i) inherent difficulty in projecting the number of claims that have not yet been asserted or the time period in which future claims may be asserted, (ii) the complaints nearly always assert claims against multiple defendants where the damages alleged are typically not attributed to individual defendants so that a defendant’s share of liability may turn on the law of joint and several liability, which can vary by state, (iii) the multiple factors described above that the Company considers in estimating its liabilities, and (iv) the several possible developments described above that may occur that could affect the Company’s estimate of liabilities. As of September 30, 2018, the Company’s receivable for insurance recoveries related to the respirator mask/asbestos litigation was $4 million. The Company continues to seek coverage under the policies of certain insolvent and other insurers. Once those claims for coverage are resolved, the Company will have collected substantially all of its remaining insurance coverage for respirator mask/asbestos claims. Respirator Mask/Asbestos Litigation — Aearo Technologies On April 1, 2008, a subsidiary of the Company purchased the stock of Aearo Holding Corp., the parent of Aearo Technologies (“Aearo”). Aearo manufactured and sold various products, including personal protection equipment, such as eye, ear, head, face, fall and certain respiratory protection products. As of September 30, 2018, Aearo and/or other companies that previously owned and operated Aearo’s respirator business (American Optical Corporation, Warner-Lambert LLC, AO Corp. and Cabot Corporation (“Cabot”)) are named defendants, with multiple co-defendants, including the Company, in numerous lawsuits in various courts in which plaintiffs allege use of mask and respirator products and seek damages from Aearo and other defendants for alleged personal injury from workplace exposures to asbestos, silica-related, or other occupational dusts found in products manufactured by other defendants or generally in the workplace. As of September 30, 2018, the Company, through its Aearo subsidiary, had accruals of $29 million for product liabilities and defense costs related to current and future Aearo-related asbestos and silica-related claims. This accrual represents the Company’s best estimate of Aearo’s probable loss and reflects an estimation period for future claims that may be filed against Aearo approaching the year 2050. Responsibility for legal costs, as well as for settlements and judgments, is currently shared in an informal arrangement among Aearo, Cabot, American Optical Corporation and a subsidiary of Warner Lambert and their respective insurers (the “Payor Group”). Liability is allocated among the parties based on the number of years each company sold respiratory products under the “AO Safety” brand and/or owned the AO Safety Division of American Optical Corporation and the alleged years of exposure of the individual plaintiff. Aearo’s share of the contingent liability is further limited by an agreement entered into between Aearo and Cabot on July 11, 1995. This agreement provides that, so long as Aearo pays to Cabot a quarterly fee of $100,000, Cabot will retain responsibility and liability for, and indemnify Aearo against, any product liability claims involving exposure to asbestos, silica, or silica products for respirators sold prior to July 11, 1995. Because of the difficulty in determining how long a particular respirator remains in the stream of commerce after being sold, Aearo and Cabot have applied the agreement to claims arising out of the alleged use of respirators involving exposure to asbestos, silica or silica products prior to January 1, 1997. With these arrangements in place, Aearo’s potential liability is limited to exposures alleged to have arisen from the use of respirators involving exposure to asbestos, silica, or silica products on or after January 1, 1997. To date, Aearo has elected to pay the quarterly fee. Aearo could potentially be exposed to additional claims for some part of the pre-July 11, 1995 period covered by its agreement with Cabot if Aearo elects to discontinue its participation in this arrangement, or if Cabot is no longer able to meet its obligations in these matters. Developments may occur that could affect the estimate of Aearo’s liabilities. These developments include, but are not limited to: (i) significant changes in the number of future claims, (ii) significant changes in the average cost of resolving claims, (iii) significant changes in the legal costs of defending these claims, (iv) significant changes in the mix and nature of claims received, (v) trial and appellate outcomes, (vi) significant changes in the law and procedure applicable to these claims, (vii) significant changes in the liability allocation among the co-defendants, (viii) the financial viability of members of the Payor Group including exhaustion of available insurance coverage limits, and/or (ix) a determination that the interpretation of the contractual obligations on which Aearo has estimated its share of liability is inaccurate. The Company cannot determine the impact of these potential developments on its current estimate of Aearo’s share of liability for these existing and future claims. If any of the developments described above were to occur, the actual amount of these liabilities for existing and future claims could be significantly larger than the amount accrued. Because of the inherent difficulty in projecting the number of claims that have not yet been asserted, the complexity of allocating responsibility for future claims among the Payor Group, and the several possible developments that may occur that could affect the estimate of Aearo’s liabilities, the Company cannot estimate the amount or range of amounts by which Aearo’s liability may exceed the accrual the Company has established. Environmental Matters and Litigation The Company’s operations are subject to environmental laws and regulations including those pertaining to air emissions, wastewater discharges, toxic substances, and the handling and disposal of solid and hazardous wastes enforceable by national, state, and local authorities around the world, and private parties in the United States and abroad. These laws and regulations provide, under certain circumstances, a basis for the remediation of contamination, for restoration of or compensation for damages to natural resources, and for personal injury and property damage claims. The Company has incurred, and will continue to incur, costs and capital expenditures in complying with these laws and regulations, defending personal injury and property damage claims, and modifying its business operations in light of its environmental responsibilities. In its effort to satisfy its environmental responsibilities and comply with environmental laws and regulations, the Company has established, and periodically updates, policies relating to environmental standards of performance for its operations worldwide. Under certain environmental laws, including the United States Comprehensive Environmental Response, Compensation and Liability Act of 1980 (CERCLA) and similar state laws, the Company may be jointly and severally liable, typically with other companies, for the costs of remediation of environmental contamination at current or former facilities and at off-site locations. The Company has identified numerous locations, most of which are in the United States, at which it may have some liability. Please refer to the section entitled “Environmental Liabilities and Insurance Receivables” that follows for information on the amount of the accrual. Environmental Matters As previously reported, the Company has been voluntarily cooperating with ongoing reviews by local, state, federal (primarily the U.S. Environmental Protection Agency (EPA)), and international agencies of possible environmental and health effects of various perfluorinated compounds, including perfluorooctanoate (“PFOA”), perfluorooctane sulfonate (“PFOS”), perfluorohexane sulfonate (“PFHxS”), or other per- and polyfluoroalkyl substances (collectively “PFAS”). As a result of its phase-out decision in May 2000, the Company no longer manufactures certain PFAS compounds referred to as “perfluorooctanyl compounds,” including PFOA, PFOS, PFHxS, and their pre-cursor compounds. The company ceased manufacturing and using the vast majority of the perfluorooctanyl compounds within approximately two years of the phase-out announcement, and ceased all manufacturing and the last significant use of this chemistry by the end of 2008. Through its ongoing life cycle management and its raw material composition identification processes associated with the Company’s policies covering the use of all persistent and bio-accumulative materials, the Company continues to control or eliminate the presence of certain PFAS in purchased materials or as byproducts in some of 3M’s current fluorochemical manufacturing processes, products, and waste streams. Regulatory activities concerning PFOA and/or PFOS continue in the United States, Europe and elsewhere, and before certain international bodies. These activities include gathering of exposure and use information, risk assessment, and consideration of regulatory approaches. As the database of studies of both PFOA and PFOS has expanded, the EPA has developed human health effects documents summarizing the available data from these studies. In February 2014, the EPA initiated external peer review of its draft human health effects documents for PFOA and PFOS. The peer review panel met in August 2014. In May 2016, the EPA announced lifetime health advisory levels for PFOA and PFOS at 70 parts per trillion (ppt) (superseding the provisional levels established by the EPA in 2009 of 400 ppt for PFOA and 200 ppt for PFOS). Where PFOA and PFOS are found together, EPA recommends that the concentrations be added together, and the lifetime health advisory for PFOA and PFOS combined is also 70 ppt. Lifetime health advisories, which are non-enforceable and non-regulatory, provide information about concentrations of drinking water contaminants at which adverse health effects are not expected to occur over the specified exposure duration. In an effort to collect exposure information under the Safe Drinking Water Act, the EPA published on May 2, 2012 a list of unregulated substances, including six PFAS, required to be monitored during the period 2013-2015 by public water system suppliers to determine the extent of their occurrence. Through January 2017, the EPA reported results for 4,920 public water supplies nationwide. Based on the 2016 lifetime health advisory, 13 public water supplies exceed the level for PFOA and 46 exceed the level for PFOS (unchanged from the July 2016 EPA summary). A technical advisory issued by EPA in September 2016 on laboratory analysis of drinking water samples stated that 65 public water supplies had exceeded the combined level for PFOA and PFOS. These results are based on one or more samples collected during the period 2012-2015 and do not necessarily reflect current conditions of these public water supplies. EPA reporting does not identify the sources of the PFOA and PFOS in the public water supplies. The Company is continuing to make progress in its work, under the supervision of state regulators, to address its historic disposal of PFAS-containing waste associated with manufacturing operations at the Decatur, Alabama, Cottage Grove, Minnesota, and Cordova, Illinois plants. As previously reported, the Company entered into a voluntary remedial action agreement with the Alabama Department of Environmental Management (ADEM) to address the presence of PFAS in the soil at the Company’s manufacturing facility in Decatur, Alabama. Pursuant to a permit issued by ADEM, for approximately twenty years, the Company incorporated its wastewater treatment plant sludge containing PFAS in fields at its Decatur facility. After a review of the available options to address the presence of PFAS in the soil, ADEM agreed that the preferred remediation option is to use a multilayer cap over the former sludge incorporation areas on the manufacturing site with subsequent groundwater migration controls and treatment. Implementation of that plan continues and is expected to be completed in 2018. The Company continues to work with the Minnesota Pollution Control Agency (MPCA) pursuant to the terms of the previously disclosed May 2007 Settlement Agreement and Consent Order to address the presence of certain PFAS in the soil and groundwater at former disposal sites in Washington County, Minnesota (Oakdale and Woodbury) and at the Company’s manufacturing facility at Cottage Grove, Minnesota. Under this agreement, the Company’s principal obligations include (i) evaluating releases of certain PFAS from these sites and proposing response actions; (ii) providing treatment or alternative drinking water upon identifying any level exceeding a Health Based Value (“HBV”) or Health Risk Limit (“HRL”) (i.e., the amount of a chemical in drinking water determined by the Minnesota Department of Health (MDH) to be safe for human consumption over a lifetime) for certain PFAS for which a HBV and/or HRL exists as a result of contamination from these sites; (iii) remediating identified sources of other PFAS at these sites that are not controlled by actions to remediate PFOA and PFOS; and (iv) sharing information with the MPCA about certain perfluorinated compounds. During 2008, the MPCA issued formal decisions adopting remedial options for the former disposal sites in Washington County, Minnesota (Oakdale and Woodbury). In August 2009, the MPCA issued a formal decision adopting remedial options for the Company’s Cottage Grove manufacturing facility. During the spring and summer of 2010, 3M began implementing the agreed upon remedial options at the Cottage Grove and Woodbury sites. 3M commenced the remedial option at the Oakdale site in late 2010. At each location the remedial options were recommended by the Company and approved by the MPCA. Remediation work has been completed at the Oakdale and Woodbury sites, and they are in an operational maintenance mode. Remediation will continue at the Cottage Grove site during 2018. In August 2014, the Illinois EPA approved a request by the Company to establish a groundwater management zone at its manufacturing facility in Cordova, Illinois, which includes ongoing pumping of impacted site groundwater, groundwater monitoring and routine reporting of results. In May 2017, the MDH issued new HBVs for PFOS and PFOA. The new HBVs are 35 ppt for PFOA and 27 ppt for PFOS. In connection with its announcement the MDH stated that “Drinking water with PFOA and PFOS, even at the levels above the updated values, does not represent an immediate health risk. These values are designed to reduce long-term health risks across the population and are based on multiple safety factors to protect the most vulnerable citizens, which makes them overprotective for most of the residents in our state.” In December 2017, the MDH issued a new HBV for perfluorobutane sulfonate (PFBS) of 2 ppb. In February 2018, the MDH published reports finding no unusual rates of certain cancers or adverse birth outcomes (low birth rates or premature births) among residents of Washington and Dakota counties in Minnesota. The EPA announced a four-step action plan in May 2018 regarding PFAS, which includes evaluating the need to set Safe Drinking Water Act maximum contaminant levels (MCLs) for PFOA and PFOS and beginning the steps necessary to designate PFOA and PFOS as “hazardous substances” under CERCLA. The U.S. Agency for Toxic Substances and Disease Registry (ATSDR) within the Department of Health and Human Services released a draft Toxicological Profile for PFAS for public review and comment in June 2018. In the draft report, ATSDR proposed draft Minimal Risk Levels (MRLs) for PFOS, PFOA and several other PFAS. An MRL is an estimate of the daily human exposure to a hazardous substance that is likely to be without appreciable risk of adverse non-cancer health effects over a specified duration of exposure. MRLs are not intended to define cleanup or action levels for ATSDR or other agencies. In August 2018, 3M submitted comments on the ATSDR proposal, noting that there are major shortcomings with the current draft, especially with the MRLs, and that the ATSDR’s profile must reflect the best science and full weight of evidence known about these chemicals. In several states, the state legislature or the state environmental agency have been considering actions that would evaluate cleanup standards, groundwater values or drinking water values for PFOS, PFOA and other PFAS. The Company cannot predict what additional regulatory actions arising from the foregoing proceedings and activities, if any, may be taken regarding such compounds or the consequences of any such actions. Litigation Related to Historical PFAS Manufacturing Operations in Alabama As previously reported, a former employee filed a purported class action lawsuit in 2002 in the Circuit Court of Morgan County, Alabama (the “St. John case”), seeking unstated damages and alleging that the plaintiffs suffered fear, increased risk, subclinical injuries, and property damage from exposure to certain perfluorochemicals at or near the Company’s Decatur, Alabama, manufacturing facility. The court in 2005 granted the Company’s motion to dismiss the named plaintiff’s personal injury-related claims on the basis that such claims are barred by the exclusivity provisions of the state’s Workers Compensation Act. The plaintiffs’ counsel filed an amended complaint in November 2006, limiting the case to property damage claims on behalf of a purported class of residents and property owners in the vicinity of the Decatur plant. In June 2015, the plaintiffs filed an amended complaint adding additional defendants, including BFI Waste Management Systems of Alabama, LLC; BFI Waste Management of North America, LLC; the City of Decatur, Alabama; Morgan County, Alabama; Municipal Utilities Board of Decatur; and Morgan County, Alabama, d/b/a Decatur Utilities. In 2005, the judge – in a second purported class action lawsuit filed by three residents of Morgan County, Alabama, seeking unstated compensatory and punitive damages involving alleged damage to their property from emissions of certain perfluorochemical compounds from the Company’s Decatur, Alabama, manufacturing facility that formerly manufactured those compounds (the “Chandler case”) – granted the Company’s motion to abate the case, effectively putting the case on hold pending the resolution of class certification issues in the St. John case. Despite the stay, plaintiffs filed an amended complaint seeking damages for alleged personal injuries and property damage on behalf of the named plaintiffs and the members of a purported class. No further action in the case is expected unless and until the stay is lifted. In February 2009, a resident of Franklin County, Alabama, filed a purported class action lawsuit in the Circuit Court of Franklin County (the “Stover case”) seeking compensatory damages and injunctive relief based on the application by the Decatur utility’s wastewater treatment plant of wastewater treatment sludge to farmland and grasslands in the state that allegedly contain PFOA, PFOS and other perfluorochemicals. The named plaintiff seeks to represent a class of all persons within the State of Alabama who have had PFOA, PFOS, and other perfluorochemicals released or deposited on their property. In March 2010, the Alabama Supreme Court ordered the case transferred from Franklin County to Morgan County. In May 2010, consistent with its handling of the other matters, the Morgan County Circuit Court abated this case, putting it on hold pending the resolution of the class certification issues in the St. John case. In October 2015, West Morgan-East Lawrence Water & Sewer Authority (Water Authority) filed an individual complaint against 3M Company, Dyneon, L.L.C, and Daikin America, Inc., in the U.S. District Court for the Northern District of Alabama. The complaint also includes representative plaintiffs who brought the complaint on behalf of themselves, and a class of all owners and possessors of property who use water provided by the Water Authority and five local water works to which the Water Authority supplies water (collectively, the “Water Utilities”). The complaint seeks compensatory and punitive damages and injunctive relief based on allegations that the defendants’ chemicals, including PFOA and PFOS from their manufacturing processes in Decatur, have contaminated the water in the Tennessee River at the water intake, and that the chemicals cannot be removed by the water treatment processes utilized by the Water Authority. In September 2016, the court granted 3M’s motion to dismiss plaintiffs’ trespass claims with prejudice, negligence claims for personal injuries, and private nuisance claims, and denied the motion to dismiss the plaintiffs’ negligence claims for property damage, public nuisance, abatement of nuisance, battery and wantonness. In June 2016, the Tennessee Riverkeeper, Inc. (Riverkeeper), a non-profit corporation, filed a lawsuit in the U.S. District Court for the Northern District of Alabama against 3M; BFI Waste Systems of Alabama; the City of Decatur, Alabama; and the Municipal Utilities Board of Decatur, Morgan County, Alabama. The complaint alleges that the defendants violated the Resource Conservation and Recovery Act in connection with the disposal of certain PFAS through their ownership and operation of their respective sites. The complaint further alleges such practices may present an imminent and substantial endangerment to health and/or the environment and that Riverkeeper has suffered and will continue to suffer irreparable harm caused by defendants’ failure to abate the endangerment unless the court grants the requested relief, including declaratory and injunctive relief. In August 2016, a group of over 200 plaintiffs filed a class action against West Morgan-East Lawrence Water and Sewer Authority (Water Authority), 3M, Dyneon, Daikin, BFI, and the City of Decatur in state court in Lawrence County, Alabama. Plaintiffs are residents of Lawrence, Morgan and other counties who are or have been customers of the Water Authority. They contend defendants have released PFAS that contaminate the Tennessee River and, in turn, their drinking water, causing damage to their health and properties. In January 2017, the court in the St. John case, discussed above, stayed this litigation pending resolution of the St. John case. In January 2017, several hundred plaintiffs sued 3M, its subsidiary Dyneon, and Daikin America in Lawrence and Morgan Counties, Alabama. The plaintiffs are owners of property, residents, and holders of property interests who receive their water from the West Morgan-East Lawrence Water and Sewer Authority (Water Authority). They assert common law claims for negligence, nuisance, trespass, wantonness, and battery, and they seek injunctive relief and punitive damages. The plaintiffs contend that the defendants own and operate manufacturing and disposal facilities in Decatur that have released and continue to release PFOA, PFOS and related chemicals into the groundwater and surface water of their sites, resulting in discharge into the Tennessee River. The plaintiffs also contend that the defendants have discharged into Bakers Creek and the Decatur Utilities Dry Creek Wastewater Treatment Plant, which, in turn, discharges wastewater containing these chemicals into the Tennessee River. The plaintiffs contend that, as a result of the alleged discharges, the water supplied by the Water Authority to the plaintiffs was, and is, contaminated with PFOA, PFOS, and related chemicals at a level dangerous to humans. In November 2017, a purported class action (the “King” case) was filed against 3M, its subsidiary Dyneon, Daikin America, and the West Morgan-East Lawrence Water and Sewer Authority (Water Authority) in the U.S. District Court for the Northern District of Alabama. The plaintiffs are residents of Lawrence and Morgan County, Alabama who receive their water from the Water Authority. They assert various common law claims, including negligence, nuisance, wantonness, and fraudulent concealment, and they seek injunctive relief, attorneys’ fees, compensatory and punitive damages for their alleged personal injuries. The plaintiffs contend that the defendants own and operate manufacturing and disposal facilities in Decatur that have released and continue to release PFOA, PFOS and related chemicals into the groundwater and surface water of their sites, resulting in discharge into the Tennessee River. The plaintiffs also contend that the defendants have discharged chemicals into the Decatur Utilities Dry Creek Wastewater Treatment Plant, which, in turn, discharged wastewater containing these chemicals into the Tennessee River. The plaintiffs contend that, as a result of the alleged discharges, the water supplied by the Water Authority to the plaintiffs was, and is, contaminated with PFOA, PFOS, and related chemicals at a level dangerous to humans. In January 2018, certain property owners in Trinity, Alabama filed a lawsuit against 3M, Dyneon, and three unnamed defendants in the U.S. District Court for the Northern District of Alabama. The plaintiffs assert claims for negligence, strict liability, trespass, nuisance, wanton and reckless conduct, and citizen suit claims for violation of the Resource Conservation and Recovery Act. They allege these claims arise from the defendants’ contamination of their property by disposal of PFAS in a landfill located on their property. The plaintiffs seek compensatory and punitive damages and a court order directing the defendants to remediate all PFAS contamination on their property. In September 2018, the case was dismissed by stipulation of the parties. In September 2018, an individual plaintiff filed a lawsuit in the U.S. District Court for the Northern District of Alabama raising allegations and claims substantially similar to those asserted by plaintiffs in the King case. 3M has not yet been served in this case. Litigation Related to Historical PFAS Manufacturing Operations in Minnesota In July 2016, the City of Lake Elmo filed a lawsuit in the U.S. District Court for the District of Minnesota against 3M alleging that the City suffered damages from drinking water supplies contaminated with PFAS, including costs to construct alternative sources of drinking water. Trial is scheduled to begin in September 2019. State Attorneys General Litigation related to PFAS In December 2010, the State of Minnesota, by its Attorney General, filed a lawsuit in Hennepin County District Court against 3M to recover damages (including unspecified assessment costs and reasonable attorney’s fees) for alleged injury to, destruction of, and loss of use of certain of the State’s natural resources under the Minnesota Environmental Response and Liability Act (MERLA) and the Minnesota Water Pollution Control Act (MWPCA), as well as statutory nuisance and common law claims of trespass, nuisance, and negligence with respect to the presence of PFAS in the groundwater, surface water, fish or other aquatic life, and sediments (the “NRD Lawsuit”). The State also sought declarations under MERLA that 3M is responsible for all damages the State may suffer in the future for injuries to natural resources from releases of PFAS into the environment, and that 3M is responsible for compensation for future loss or destruction of fish, aquatic life, and other damages under the MWPCA. In September 2017, the State’s damages expert submitted a report that contended the State incurred $5 billion in damages. In November 2017, the State of Minnesota filed a motion for leave to amend its complaint to seek punitive damages from 3M, and 3M filed a motion for summary judgment contending, among other things, that the State’s claims were barred by the applicable statute of limitations. In December 2017, the court urged the parties to attempt to resolve the litigation before trial, and in January 2018, the court appointed a mediator to facilitate that process. In February 2018, 3M and the State of Minnesota reached a resolution of the NRD Lawsuit. Under the terms of the settlement, 3M agreed to provide an $850 million grant to the State for a special “3M Water Quality and Sustainability Fund.” This Fund will enable projects that support water sustainability in the Twin Cities East Metro region, such as continued delivery of water to residents and enhancing groundwater recharge to support sustainable growth. The projects will also result in habitat and recreation improvements, such as fishing piers, trails, and open space preservation. 3M recorded a pre-tax charge of $897 million, inclusive of legal fees and other related obligations, in the first quarter of 2018 associated with the resolution of this matter. In June 2018, the State of New York, by its Attorney General, filed a lawsuit in Albany Country Supreme Court against 3M, Tyco Fire Products LP, Chemguard, Inc., Buckeye Fire Equipment Co., National Foam, Inc., and Kidde-Fenwal, Inc., seeking to recover (1) the costs incurred in responding to the contamination caused by Aqueous Film Forming Foam (AFFF) manufactured by 3M and others; (2) damages for injury to, destruction of, and loss of the State’s natural resources and related recreational series; and (3) property damage. In July 2018, the governor of Michigan requested that the Michigan Attorney General file a lawsuit against 3M and others related to PFAS in a public letter. The Michigan Attorney General has not yet determined whether he will do so. Aqueous Film Forming Foam (AFFF) Environmental Litigation 3M manufactured and marketed AFFF for use in firefighting at airports and military bases from approximately 1963 to 2000. As of September 30, 2018, 75 putative class action and other lawsuits have been filed against 3M and other defendants in various state and federal courts in Colorado, Delaware, Florida, Massachusetts, New York, Pennsylvania, and Washington where current or former airports, military bases, or fire training facilities are or were located. In these cases, plaintiffs typically allege that certain PFAS used in AFFF contaminated the soil and groundwater where AFFF was used and seek damages for loss of use and enjoyment of properties, diminished property values, investigation costs, remediation costs, and in some cases, personal injury and funds for medical monitoring. Several companies have been sued along with 3M, including Ansul Co. (acquired by Tyco, Inc.), Angus Fire, Buckeye Fire Protection Co., Chemguard, National Foam, Inc., and United Technologies Corp. Other PFAS-related Environmental Litigation 3M manufactured and marketed certain products containing PFAS for use by customers in their manufacturing process. As of September 30, 2018, the following cases have been filed against 3M, another manufacturer, and their customers in connection with the use and disposal of these products. In September 2017, three complaints were filed in the U.S. District Court for the Northern District of New York against 3M, Saint-Gobain Performance Plastics Corp. (“Saint-Gobain”), Honeywell International Inc. (“Honeywell”) and E.I. DuPont De Nemours and Company. Plaintiffs allege that 3M manufactured and sold PFOA that was used for manufacturing purposes at Saint-Gobain’s and Honeywell’s facilities located in the Village of Hoosick Falls and the Town of Hoosick. Plaintiffs claim that the drinking water around Hoosick Falls became contaminated with unsafe levels of PFOA due to the activities of the defendants, and allege that they suffered bodily injury due to the ingestion and inhalation of PFOA. Plaintiffs seek unstated compensatory, consequential, and punitive damages, as well as attorneys’ fees and costs. In December 2017, plaintiffs filed a punitive class action in federal court against 3M, Wolverine World Wide and Waste Management, Inc., alleging negligence, trespass, intentional and negligent infliction of emotional distress, battery, products liability, public and private nuisance, fraudulent concealment, and unjust enrichment. Each count was filed against each defendant. The action arises from Wolverine’s allegedly improper disposal of materials and wastes related to their shoe manufacturing operations. Plaintiffs allege Wolverine used 3M Scotchgard in its manufacturing process and that chemicals from 3M’s product have contaminated the environment after being disposed of near drinking water sources. In addition to the federal court class action, as of September 30, 2018, 3M has been named a defendant in 122 private individual actions in Michigan state court based on similar allegations. 3M is aware of additional cases filed against Wolverine in Michigan state court in which 3M is likely to be added as a defendant in the future. In Alabama, 3M is defending two lawsuits filed in state court by local public water suppliers relating to 3M’s sale of PFAS-containing products to carpet manufacturers in Georgia. The plaintiffs in these cases allege that the carpet manufacturers improperly discharged PFAS into the surface water and groundwater, contaminating drinking water supplies of cities located downstream along the Coosa River. Other Environmental Litigation In July 2018, the Company, along with more than 120 other companies, was served with a complaint seeking cost recovery and contribution towards the cleaning up of approximately eight miles of the Lower Passaic River in New Jersey. The plaintiff, Occidental Chemical Corporation, alleges that it agreed to design and pay the estimated $165 million cost to remove and cap sediment containing eight chemicals of concern, including PCBs and dioxins. The complaint seeks to spread those costs among the defendants, including the Company. The Company’s involvement in the case relates to its past use of two commercial drum conditioning facilities in New Jersey. Whether, and to what extent, the Company may be required to contribute to the costs at issue in the case remains to be determined. For environmental litigation matters described above, no liability has been recorded as the Company believes liability in those matters is not probable and estimable and the Company is not able to estimate a possible loss or range of loss at this time. Environmental Liabilities and Insurance Receivables As of September 30, 2018, the Company had recorded liabilities of $29 million for estimated “environmental remediation” costs based upon an evaluation of currently available facts with respect to each individual site and also recorded related insurance receivables of $8 million. The Company records liabilities for remediation costs on an undiscounted basis when they are probable and reasonably estimable, generally no later than the completion of feasibility studies or the Company’s commitment to a plan of action. Liabilities for estimated costs of environmental remediation, depending on the site, are based primarily upon internal or third-party environmental studies, and estimates as to the number, participation level and financial viability of any other potentially responsible parties, the extent of the contamination and the nature of required remedial actions. The Company adjusts recorded liabilities as further information develops or circumstances change. The Company expects that it will pay the amounts recorded over the periods of remediation for the applicable sites, currently ranging up to 20 years. As of September 30, 2018, the Company had recorded liabilities of $69 million for “other environmental liabilities” based upon an evaluation of currently available facts to implement the Settlement Agreement and Consent Order with the MPCA (including the best estimate of the probable liability under the settlement of the NRD Lawsuit for interim treatment of municipal and private wells), the remedial action agreement with ADEM, as well as presence in the soil and groundwater at the Company’s manufacturing facilities in Decatur, Alabama, and Cottage Grove, Minnesota, and at two former disposal sites in Washington County, Minnesota (Oakdale and Woodbury). The Company expects that most of the spending will occur over the next four years. It is difficult to estimate the cost of environmental compliance and remediation given the uncertainties regarding the interpretation and enforcement of applicable environmental laws and regulations, the extent of environmental contamination and the existence of alternative cleanup methods. Developments may occur that could affect the Company’s current assessment, including, but not limited to: (i) changes in the information available regarding the environmental impact of the Company’s operations and products; (ii) changes in environmental regulations, changes in permissible levels of specific compounds in drinking water sources, or changes in enforcement theories and policies, including efforts to recover natural resource damages; (iii) new and evolving analytical and remediation techniques; (iv) success in allocating liability to other potentially responsible parties; and (v) the financial viability of other potentially responsible parties and third-party indemnitors. For sites included in both “environmental remediation liabilities” and “other environmental liabilities,” at which remediation activity is largely complete and remaining activity relates primarily to operation and maintenance of the remedy, including required post-remediation monitoring, the Company believes the exposure to loss in excess of the amount accrued would not be material to the Company’s consolidated results of operations or financial condition. However, for locations at which remediation activity is largely ongoing, the Company cannot estimate a possible loss or range of loss in excess of the associated established accruals for the reasons described above. Other Matters Department of Labor Investigation The U.S. Department of Labor (DOL) notified 3M in April 2015 that it had commenced an investigation of 3M’s pension plan pursuant to the federal Employee Retirement Income Security Act of 1974, as amended (ERISA). The DOL has stated its investigation relates to certain private equity investments, plan expenses, securities lending, and distributions of plan benefits. In response to certain DOL requests, 3M produced documents and made employees available for interviews. In December 2016, the DOL issued certain subpoenas to 3M and 3M Investment Management Corp. relating to this investigation. 3M has produced additional responsive documents and is cooperating with the DOL in its investigation. In June 2018, the DOL issued a letter indicating that it did not intend to take further action. Product Liability Litigation As of September 30, 2018, the Company is a named defendant in lawsuits involving approximately 4,955 plaintiffs (compared to approximately 4,270 plaintiffs at December 31, 2017) who allege the Bair Hugger™ patient warming system caused a surgical site infection. Nearly all of the lawsuits are pending in federal court in Minnesota. The plaintiffs claim they underwent various joint arthroplasty, cardiovascular, and other surgeries and later developed surgical site infections due to the use of the Bair Hugger™ patient warming system (the Bair Hugger™ product line was acquired by 3M as part of the 2010 acquisition of Arizant, Inc., a leading manufacturer of patient warming solutions designed to prevent hypothermia and maintain normal body temperature in surgical settings). The complaints seek damages and other relief based on theories of strict liability, negligence, breach of express and implied warranties, failure to warn, design and manufacturing defect, fraudulent and/or negligent misrepresentation/concealment, unjust enrichment, and violations of various state consumer fraud, deceptive or unlawful trade practices and/or false advertising acts. One case, from the U.S. District Court for the Western District of Tennessee is a putative nationwide class action. The U.S. Judicial Panel on Multidistrict Litigation (MDL) granted the plaintiffs’ motion to transfer and consolidate all cases pending in federal courts to the U.S. District Court for the District of Minnesota to be managed in a multi-district proceeding during the pre-trial phase of the litigation. In 2017, the U.S. District Court and the Minnesota state courts denied the plaintiffs’ motions to amend their complaints to add claims for punitive damages. At a joint hearing before the U.S. District Court and the Minnesota State court, on the parties’ motion to exclude each other’s experts, and 3M’s motion for summary judgment with respect to general causation, the federal court did not exclude the plaintiffs’ experts and denied 3M’s motion for summary judgment on general causation. In January 2018, the state court, in hearing the same arguments, excluded plaintiffs’ experts and granted 3M’s motion for summary judgment on general causation, dismissing all 61 cases pending before the state court in Minnesota. Plaintiffs have appealed that ruling and the state court’s punitive damages ruling, and oral argument before the Minnesota Court of Appeals is scheduled in November 2018. In April 2018, the federal court partially granted 3M’s motion for summary judgment in the first bellwether case, leaving for trial a claim for strict liability based upon design defect. The court dismissed the plaintiff’s claims for negligence, failure to warn, and common law and statutory fraud. In the trial of the first bellwether case in May 2018, the jury returned a unanimous verdict in 3M’s favor finding that the Bair Hugger™ patient warming system was not defective and was not the cause of the plaintiff’s injury. In June 2016, the Company was served with a putative class action filed in the Ontario Superior Court of Justice for all Canadian residents who underwent various joint arthroplasty, cardiovascular, and other surgeries and later developed surgical site infections due to the use of the Bair Hugger™ patient warming system. The representative plaintiff seeks relief (including punitive damages) under Canadian law based on theories similar to those asserted in the MDL. No liability has been recorded for the Bair Hugger™ litigation because the Company believes that any such liability is not probable and estimable at this time. In September 2011, 3M Oral Care launched Lava Ultimate CAD/CAM dental restorative material. The product was originally indicated for inlay, onlay, veneer, and crown applications. In June 2015, 3M Oral Care voluntarily removed crown applications from the product’s instructions for use, following reports from dentists of patients’ crowns debonding, requiring additional treatment. The product remains on the market for other applications. 3M communicated with the U.S. Food and Drug Administration, as well as regulators outside the United States. 3M also informed customers and distributors of its action, offered to accept return of unused materials and provide refunds. In May 2018, 3M reached a preliminary settlement for an amount that did not have a material impact to the Company of the lawsuit pending in the U.S. District Court for the District of Minnesota that sought certification of a class of dentists in the United States and its territories. The settlement is subject to the court’s approval and certification of the settlement class, with a right of class members to opt-out of the settlement and bring individual claims against the Company. For product liability litigation matters described in this section for which a liability has been recorded, the Company believes the amount recorded is not material to the Company’s consolidated results of operations or financial condition. In addition, the Company is not able to estimate a possible loss or range of loss in excess of the established accruals at this time.

NOTE 14. Commitments and Contingencies

Legal Proceedings:

The Company and some of its subsidiaries are involved in numerous claims and lawsuits, principally in the United States, and regulatory proceedings worldwide. These include various products liability (involving products that the Company now or formerly manufactured and sold), intellectual property, and commercial claims and lawsuits, including those brought under the antitrust laws, and environmental proceedings. Unless otherwise stated, the Company is vigorously defending all such litigation. Additional information about the Company’s process for disclosure and recording of liabilities and insurance receivables related to legal proceedings can be found in Note 15 “Commitments and Contingencies” in the Company’s Annual Report on Form 10-K for the year ended December 31, 2017 as updated by the Company’s Current Report on Form 8-K dated May 8, 2018.

The following sections first describe the significant legal proceedings in which the Company is involved, and then describe the liabilities and associated insurance receivables the Company has accrued relating to its significant legal proceedings.

Respirator Mask/Asbestos Litigation

As of September 30, 2018, the Company is a named defendant, with multiple co-defendants, in numerous lawsuits in various courts that purport to represent approximately 2,255 individual claimants, compared to approximately 2,230 individual claimants with actions pending at December 31, 2017.

The vast majority of the lawsuits and claims resolved by and currently pending against the Company allege use of some of the Company’s mask and respirator products and seek damages from the Company and other defendants for alleged personal injury from workplace exposures to asbestos, silica, coal mine dust or other occupational dusts found in products manufactured by other defendants or generally in the workplace. A minority of the lawsuits and claims resolved by and currently pending against the Company generally allege personal injury from occupational exposure to asbestos from products previously manufactured by the Company, which are often unspecified, as well as products manufactured by other defendants, or occasionally at Company premises.

The Company’s current volume of new and pending matters is substantially lower than it experienced at the peak of filings in 2003. The Company expects that filing of claims by unimpaired claimants in the future will continue to be at much lower levels than in the past. Accordingly, the number of claims alleging more serious injuries, including mesothelioma and other malignancies, will represent a greater percentage of total claims than in the past. The Company has prevailed in thirteen of the fourteen cases taken to trial, including eleven of the twelve cases tried to verdict (such trials occurred in 1999, 2000, 2001, 2003, 2004, 2007, 2015, and the cases tried in 2016, 2017, and 2018-described below), and an appellate reversal in 2005 of the 2001 jury verdict adverse to the Company. The remaining case, tried in 2009, was dismissed by the court at the close of plaintiff’s evidence, based on the court’s legal finding that the plaintiff had not presented sufficient evidence to support a jury verdict. In August 2016, 3M received a unanimous verdict in its favor from a jury in state court in Kentucky, in 3M’s first respirator trial involving coal mine dust. The estate of the plaintiff alleged that the 3M 8710 respirator is defective and caused his death because it did not protect him from harmful coal mine dust. The jury rejected plaintiff’s claim and returned a verdict finding no liability against 3M. The verdict is final as the plaintiff did not file an appeal. In September 2017, 3M received a unanimous verdict in its favor from a jury in state court in Kentucky in 3M’s second respirator trial involving coal mine dust. The jury ultimately determined that the plaintiff’s claims were barred by the statute of limitations. In November 2017, the court denied the plaintiff’s motion for a new trial. The plaintiff did not file an appeal, thereby ending the litigation. In February 2018, 3M received a verdict in its favor from a jury in state court in California. The plaintiff alleged that the 3M 8710 respirator was defective and caused his mesothelioma because it did not protect him from asbestos fibers. The jury rejected plaintiff’s claim and returned a verdict finding no liability against 3M. In April 2018, a jury in state court in Kentucky found 3M’s 8710 respirators failed to protect two coal miners from coal mine dust and awarded aggregate compensatory damages of approximately $2 million and punitive damages totaling $63 million. In August 2018, the trial court entered judgment and the Company has appealed. The Company believes liability in this case is not probable and estimable. In June 2018, the Company also settled a number of coal mine dust lawsuits for an amount that was not material to the Company.

The Company has demonstrated in these past trial proceedings that its respiratory protection products are effective as claimed when used in the intended manner and in the intended circumstances. Consequently, the Company believes that claimants are unable to establish that their medical conditions, even if significant, are attributable to the Company’s respiratory protection products. Nonetheless the Company’s litigation experience indicates that claims of persons with malignant conditions are costlier to resolve than the claims of unimpaired persons, and it therefore believes the average cost of resolving pending and future claims on a per-claim basis will continue to be higher than it experienced in prior periods when the vast majority of claims were asserted by medically unimpaired claimants.

As previously reported, the State of West Virginia, through its Attorney General, filed a complaint in 2003 against the Company and two other manufacturers of respiratory protection products in the Circuit Court of Lincoln County, West Virginia, and amended its complaint in 2005. The amended complaint seeks substantial, but unspecified, compensatory damages primarily for reimbursement of the costs allegedly incurred by the State for worker’s compensation and healthcare benefits provided to all workers with occupational pneumoconiosis and unspecified punitive damages. The case was inactive from the fourth quarter of 2007 until late 2013, other than a case management conference in March 2011. In November 2013, the State filed a motion to bifurcate the lawsuit into separate liability and damages proceedings. At the hearing on the motion, the court declined to bifurcate the lawsuit. No liability has been recorded for this matter because the Company believes that liability is not probable and estimable at this time. In addition, the Company is not able to estimate a possible loss or range of loss given the lack of any meaningful discovery responses by the State of West Virginia, the otherwise minimal activity in this case and the fact that the complaint asserts claims against two other manufacturers where a defendant’s share of liability may turn on the law of joint and several liability and by the amount of fault, if any, a jury might allocate to each defendant if the case is ultimately tried.

Respirator Mask/Asbestos Liabilities and Insurance Receivables:

The Company regularly conducts a comprehensive legal review of its respirator mask/asbestos liabilities. The Company reviews recent and historical claims data, including without limitation, (i) the number of pending claims filed against the Company, (ii) the nature and mix of those claims (i.e., the proportion of claims asserting usage of the Company’s mask or respirator products and alleging exposure to each of asbestos, silica, coal or other occupational dusts, and claims pleading use of asbestos-containing products allegedly manufactured by the Company), (iii) the costs to defend and resolve pending claims, and (iv) trends in filing rates and in costs to defend and resolve claims, (collectively, the “Claims Data”). As part of its comprehensive legal review, the Company regularly provides the Claims Data to a third party with expertise in determining the impact of Claims Data on future filing trends and costs. The third party assists the Company in estimating the costs to defend and resolve pending and future claims. The Company uses these estimates to develop its best estimate of probable liability.

Developments may occur that could affect the Company’s estimate of its liabilities. These developments include, but are not limited to, significant changes in (i) the key assumptions underlying the Company’s accrual, including, the number of future claims, the nature and mix of those claims, the average cost of defending and resolving claims, and in maintaining trial readiness (ii) trial and appellate outcomes, (iii) the law and procedure applicable to these claims, and (iv) the financial viability of other co-defendants and insurers.

As a result of the Company’s review of its respirator mask/asbestos liabilities and as a result of the cost of resolving claims of persons who claim more serious injuries, including mesothelioma and other malignancies, the Company increased its accruals in the first nine months of 2018 for respirator mask/asbestos liabilities by $56 million. In the first nine months of 2018, the Company made payments for legal fees and settlements of $64 million related to the respirator mask/asbestos litigation. As of September 30, 2018, the Company had an accrual for respirator mask/asbestos liabilities (excluding Aearo accruals) of $600 million. This accrual represents the Company’s best estimate of probable loss and reflects an estimation period for future claims that may be filed against the Company approaching the year 2050. The Company cannot estimate the amount or upper end of the range of amounts by which the liability may exceed the accrual the Company has established because of the (i) inherent difficulty in projecting the number of claims that have not yet been asserted or the time period in which future claims may be asserted, (ii) the complaints nearly always assert claims against multiple defendants where the damages alleged are typically not attributed to individual defendants so that a defendant’s share of liability may turn on the law of joint and several liability, which can vary by state, (iii) the multiple factors described above that the Company considers in estimating its liabilities, and (iv) the several possible developments described above that may occur that could affect the Company’s estimate of liabilities.

As of September 30, 2018, the Company’s receivable for insurance recoveries related to the respirator mask/asbestos litigation was $4 million. The Company continues to seek coverage under the policies of certain insolvent and other insurers. Once those claims for coverage are resolved, the Company will have collected substantially all of its remaining insurance coverage for respirator mask/asbestos claims.

Respirator Mask/Asbestos Litigation — Aearo Technologies

On April 1, 2008, a subsidiary of the Company purchased the stock of Aearo Holding Corp., the parent of Aearo Technologies (“Aearo”). Aearo manufactured and sold various products, including personal protection equipment, such as eye, ear, head, face, fall and certain respiratory protection products.

As of September 30, 2018, Aearo and/or other companies that previously owned and operated Aearo’s respirator business (American Optical Corporation, Warner-Lambert LLC, AO Corp. and Cabot Corporation (“Cabot”)) are named defendants, with multiple co-defendants, including the Company, in numerous lawsuits in various courts in which plaintiffs allege use of mask and respirator products and seek damages from Aearo and other defendants for alleged personal injury from workplace exposures to asbestos, silica-related, or other occupational dusts found in products manufactured by other defendants or generally in the workplace.

As of September 30, 2018, the Company, through its Aearo subsidiary, had accruals of $29 million for product liabilities and defense costs related to current and future Aearo-related asbestos and silica-related claims. This accrual represents the Company’s best estimate of Aearo’s probable loss and reflects an estimation period for future claims that may be filed against Aearo approaching the year 2050. Responsibility for legal costs, as well as for settlements and judgments, is currently shared in an informal arrangement among Aearo, Cabot, American Optical Corporation and a subsidiary of Warner Lambert and their respective insurers (the “Payor Group”). Liability is allocated among the parties based on the number of years each company sold respiratory products under the “AO Safety” brand and/or owned the AO Safety Division of American Optical Corporation and the alleged years of exposure of the individual plaintiff. Aearo’s share of the contingent liability is further limited by an agreement entered into between Aearo and Cabot on July 11, 1995. This agreement provides that, so long as Aearo pays to Cabot a quarterly fee of $100,000, Cabot will retain responsibility and liability for, and indemnify Aearo against, any product liability claims involving exposure to asbestos, silica, or silica products for respirators sold prior to July 11, 1995. Because of the difficulty in determining how long a particular respirator remains in the stream of commerce after being sold, Aearo and Cabot have applied the agreement to claims arising out of the alleged use of respirators involving exposure to asbestos, silica or silica products prior to January 1, 1997. With these arrangements in place, Aearo’s potential liability is limited to exposures alleged to have arisen from the use of respirators involving exposure to asbestos, silica, or silica products on or after January 1, 1997. To date, Aearo has elected to pay the quarterly fee. Aearo could potentially be exposed to additional claims for some part of the pre-July 11, 1995 period covered by its agreement with Cabot if Aearo elects to discontinue its participation in this arrangement, or if Cabot is no longer able to meet its obligations in these matters.

Developments may occur that could affect the estimate of Aearo’s liabilities. These developments include, but are not limited to: (i) significant changes in the number of future claims, (ii) significant changes in the average cost of resolving claims, (iii) significant changes in the legal costs of defending these claims, (iv) significant changes in the mix and nature of claims received, (v) trial and appellate outcomes, (vi) significant changes in the law and procedure applicable to these claims, (vii) significant changes in the liability allocation among the co-defendants, (viii) the financial viability of members of the Payor Group including exhaustion of available insurance coverage limits, and/or (ix) a determination that the interpretation of the contractual obligations on which Aearo has estimated its share of liability is inaccurate. The Company cannot determine the impact of these potential developments on its current estimate of Aearo’s share of liability for these existing and future claims. If any of the developments described above were to occur, the actual amount of these liabilities for existing and future claims could be significantly larger than the amount accrued.

Because of the inherent difficulty in projecting the number of claims that have not yet been asserted, the complexity of allocating responsibility for future claims among the Payor Group, and the several possible developments that may occur that could affect the estimate of Aearo’s liabilities, the Company cannot estimate the amount or range of amounts by which Aearo’s liability may exceed the accrual the Company has established.

Environmental Matters and Litigation

The Company’s operations are subject to environmental laws and regulations including those pertaining to air emissions, wastewater discharges, toxic substances, and the handling and disposal of solid and hazardous wastes enforceable by national, state, and local authorities around the world, and private parties in the United States and abroad. These laws and regulations provide, under certain circumstances, a basis for the remediation of contamination, for restoration of or compensation for damages to natural resources, and for personal injury and property damage claims. The Company has incurred, and will continue to incur, costs and capital expenditures in complying with these laws and regulations, defending personal injury and property damage claims, and modifying its business operations in light of its environmental responsibilities. In its effort to satisfy its environmental responsibilities and comply with environmental laws and regulations, the Company has established, and periodically updates, policies relating to environmental standards of performance for its operations worldwide.

Under certain environmental laws, including the United States Comprehensive Environmental Response, Compensation and Liability Act of 1980 (CERCLA) and similar state laws, the Company may be jointly and severally liable, typically with other companies, for the costs of remediation of environmental contamination at current or former facilities and at off-site locations. The Company has identified numerous locations, most of which are in the United States, at which it may have some liability. Please refer to the section entitled “Environmental Liabilities and Insurance Receivables” that follows for information on the amount of the accrual.

Environmental Matters

As previously reported, the Company has been voluntarily cooperating with ongoing reviews by local, state, federal (primarily the U.S. Environmental Protection Agency (EPA)), and international agencies of possible environmental and health effects of various perfluorinated compounds, including perfluorooctanoate (“PFOA”), perfluorooctane sulfonate (“PFOS”), perfluorohexane sulfonate (“PFHxS”), or other per- and polyfluoroalkyl substances (collectively “PFAS”). As a result of its phase-out decision in May 2000, the Company no longer manufactures certain PFAS compounds referred to as “perfluorooctanyl compounds,” including PFOA, PFOS, PFHxS, and their pre-cursor compounds. The company ceased manufacturing and using the vast majority of the perfluorooctanyl compounds within approximately two years of the phase-out announcement, and ceased all manufacturing and the last significant use of this chemistry by the end of 2008. Through its ongoing life cycle management and its raw material composition identification processes associated with the Company’s policies covering the use of all persistent and bio-accumulative materials, the Company continues to control or eliminate the presence of certain PFAS in purchased materials or as byproducts in some of 3M’s current fluorochemical manufacturing processes, products, and waste streams.

Regulatory activities concerning PFOA and/or PFOS continue in the United States, Europe and elsewhere, and before certain international bodies. These activities include gathering of exposure and use information, risk assessment, and consideration of regulatory approaches. As the database of studies of both PFOA and PFOS has expanded, the EPA has developed human health effects documents summarizing the available data from these studies. In February 2014, the EPA initiated external peer review of its draft human health effects documents for PFOA and PFOS. The peer review panel met in August 2014. In May 2016, the EPA announced lifetime health advisory levels for PFOA and PFOS at 70 parts per trillion (ppt) (superseding the provisional levels established by the EPA in 2009 of 400 ppt for PFOA and 200 ppt for PFOS). Where PFOA and PFOS are found together, EPA recommends that the concentrations be added together, and the lifetime health advisory for PFOA and PFOS combined is also 70 ppt. Lifetime health advisories, which are non-enforceable and non-regulatory, provide information about concentrations of drinking water contaminants at which adverse health effects are not expected to occur over the specified exposure duration. In an effort to collect exposure information under the Safe Drinking Water Act, the EPA published on May 2, 2012 a list of unregulated substances, including six PFAS, required to be monitored during the period 2013-2015 by public water system suppliers to determine the extent of their occurrence. Through January 2017, the EPA reported results for 4,920 public water supplies nationwide. Based on the 2016 lifetime health advisory, 13 public water supplies exceed the level for PFOA and 46 exceed the level for PFOS (unchanged from the July 2016 EPA summary). A technical advisory issued by EPA in September 2016 on laboratory analysis of drinking water samples stated that 65 public water supplies had exceeded the combined level for PFOA and PFOS. These results are based on one or more samples collected during the period 2012-2015 and do not necessarily reflect current conditions of these public water supplies. EPA reporting does not identify the sources of the PFOA and PFOS in the public water supplies.

The Company is continuing to make progress in its work, under the supervision of state regulators, to address its historic disposal of PFAS-containing waste associated with manufacturing operations at the Decatur, Alabama, Cottage Grove, Minnesota, and Cordova, Illinois plants. As previously reported, the Company entered into a voluntary remedial action agreement with the Alabama Department of Environmental Management (ADEM) to address the presence of PFAS in the soil at the Company’s manufacturing facility in Decatur, Alabama. Pursuant to a permit issued by ADEM, for approximately twenty years, the Company incorporated its wastewater treatment plant sludge containing PFAS in fields at its Decatur facility. After a review of the available options to address the presence of PFAS in the soil, ADEM agreed that the preferred remediation option is to use a multilayer cap over the former sludge incorporation areas on the manufacturing site with subsequent groundwater migration controls and treatment. Implementation of that plan continues and is expected to be completed in 2018.

The Company continues to work with the Minnesota Pollution Control Agency (MPCA) pursuant to the terms of the previously disclosed May 2007 Settlement Agreement and Consent Order to address the presence of certain PFAS in the soil and groundwater at former disposal sites in Washington County, Minnesota (Oakdale and Woodbury) and at the Company’s manufacturing facility at Cottage Grove, Minnesota. Under this agreement, the Company’s principal obligations include (i) evaluating releases of certain PFAS from these sites and proposing response actions; (ii) providing treatment or alternative drinking water upon identifying any level exceeding a Health Based Value (“HBV”) or Health Risk Limit (“HRL”) (i.e., the amount of a chemical in drinking water determined by the Minnesota Department of Health (MDH) to be safe for human consumption over a lifetime) for certain PFAS for which a HBV and/or HRL exists as a result of contamination from these sites; (iii) remediating identified sources of other PFAS at these sites that are not controlled by actions to remediate PFOA and PFOS; and (iv) sharing information with the MPCA about certain perfluorinated compounds. During 2008, the MPCA issued formal decisions adopting remedial options for the former disposal sites in Washington County, Minnesota (Oakdale and Woodbury). In August 2009, the MPCA issued a formal decision adopting remedial options for the Company’s Cottage Grove manufacturing facility. During the spring and summer of 2010, 3M began implementing the agreed upon remedial options at the Cottage Grove and Woodbury sites. 3M commenced the remedial option at the Oakdale site in late 2010. At each location the remedial options were recommended by the Company and approved by the MPCA. Remediation work has been completed at the Oakdale and Woodbury sites, and they are in an operational maintenance mode. Remediation will continue at the Cottage Grove site during 2018.

In August 2014, the Illinois EPA approved a request by the Company to establish a groundwater management zone at its manufacturing facility in Cordova, Illinois, which includes ongoing pumping of impacted site groundwater, groundwater monitoring and routine reporting of results.

In May 2017, the MDH issued new HBVs for PFOS and PFOA. The new HBVs are 35 ppt for PFOA and 27 ppt for PFOS. In connection with its announcement the MDH stated that “Drinking water with PFOA and PFOS, even at the levels above the updated values, does not represent an immediate health risk. These values are designed to reduce long-term health risks across the population and are based on multiple safety factors to protect the most vulnerable citizens, which makes them overprotective for most of the residents in our state.” In December 2017, the MDH issued a new HBV for perfluorobutane sulfonate (PFBS) of 2 ppb. In February 2018, the MDH published reports finding no unusual rates of certain cancers or adverse birth outcomes (low birth rates or premature births) among residents of Washington and Dakota counties in Minnesota.

The EPA announced a four-step action plan in May 2018 regarding PFAS, which includes evaluating the need to set Safe Drinking Water Act maximum contaminant levels (MCLs) for PFOA and PFOS and beginning the steps necessary to designate PFOA and PFOS as “hazardous substances” under CERCLA.

The U.S. Agency for Toxic Substances and Disease Registry (ATSDR) within the Department of Health and Human Services released a draft Toxicological Profile for PFAS for public review and comment in June 2018. In the draft report, ATSDR proposed draft Minimal Risk Levels (MRLs) for PFOS, PFOA and several other PFAS. An MRL is an estimate of the daily human exposure to a hazardous substance that is likely to be without appreciable risk of adverse non-cancer health effects over a specified duration of exposure. MRLs are not intended to define cleanup or action levels for ATSDR or other agencies. In August 2018, 3M submitted comments on the ATSDR proposal, noting that there are major shortcomings with the current draft, especially with the MRLs, and that the ATSDR’s profile must reflect the best science and full weight of evidence known about these chemicals.

In several states, the state legislature or the state environmental agency have been considering actions that would evaluate cleanup standards, groundwater values or drinking water values for PFOS, PFOA and other PFAS.

The Company cannot predict what additional regulatory actions arising from the foregoing proceedings and activities, if any, may be taken regarding such compounds or the consequences of any such actions.

Litigation Related to Historical PFAS Manufacturing Operations in Alabama

As previously reported, a former employee filed a purported class action lawsuit in 2002 in the Circuit Court of Morgan County, Alabama (the “St. John case”), seeking unstated damages and alleging that the plaintiffs suffered fear, increased risk, subclinical injuries, and property damage from exposure to certain perfluorochemicals at or near the Company’s Decatur, Alabama, manufacturing facility. The court in 2005 granted the Company’s motion to dismiss the named plaintiff’s personal injury-related claims on the basis that such claims are barred by the exclusivity provisions of the state’s Workers Compensation Act. The plaintiffs’ counsel filed an amended complaint in November 2006, limiting the case to property damage claims on behalf of a purported class of residents and property owners in the vicinity of the Decatur plant. In June 2015, the plaintiffs filed an amended complaint adding additional defendants, including BFI Waste Management Systems of Alabama, LLC; BFI Waste Management of North America, LLC; the City of Decatur, Alabama; Morgan County, Alabama; Municipal Utilities Board of Decatur; and Morgan County, Alabama, d/b/a Decatur Utilities.

In 2005, the judge – in a second purported class action lawsuit filed by three residents of Morgan County, Alabama, seeking unstated compensatory and punitive damages involving alleged damage to their property from emissions of certain perfluorochemical compounds from the Company’s Decatur, Alabama, manufacturing facility that formerly manufactured those compounds (the “Chandler case”) – granted the Company’s motion to abate the case, effectively putting the case on hold pending the resolution of class certification issues in the St. John case. Despite the stay, plaintiffs filed an amended complaint seeking damages for alleged personal injuries and property damage on behalf of the named plaintiffs and the members of a purported class. No further action in the case is expected unless and until the stay is lifted.

In February 2009, a resident of Franklin County, Alabama, filed a purported class action lawsuit in the Circuit Court of Franklin County (the “Stover case”) seeking compensatory damages and injunctive relief based on the application by the Decatur utility’s wastewater treatment plant of wastewater treatment sludge to farmland and grasslands in the state that allegedly contain PFOA, PFOS and other perfluorochemicals. The named plaintiff seeks to represent a class of all persons within the State of Alabama who have had PFOA, PFOS, and other perfluorochemicals released or deposited on their property. In March 2010, the Alabama Supreme Court ordered the case transferred from Franklin County to Morgan County. In May 2010, consistent with its handling of the other matters, the Morgan County Circuit Court abated this case, putting it on hold pending the resolution of the class certification issues in the St. John case.

In October 2015, West Morgan-East Lawrence Water & Sewer Authority (Water Authority) filed an individual complaint against 3M Company, Dyneon, L.L.C, and Daikin America, Inc., in the U.S. District Court for the Northern District of Alabama. The complaint also includes representative plaintiffs who brought the complaint on behalf of themselves, and a class of all owners and possessors of property who use water provided by the Water Authority and five local water works to which the Water Authority supplies water (collectively, the “Water Utilities”). The complaint seeks compensatory and punitive damages and injunctive relief based on allegations that the defendants’ chemicals, including PFOA and PFOS from their manufacturing processes in Decatur, have contaminated the water in the Tennessee River at the water intake, and that the chemicals cannot be removed by the water treatment processes utilized by the Water Authority. In September 2016, the court granted 3M’s motion to dismiss plaintiffs’ trespass claims with prejudice, negligence claims for personal injuries, and private nuisance claims, and denied the motion to dismiss the plaintiffs’ negligence claims for property damage, public nuisance, abatement of nuisance, battery and wantonness.

In June 2016, the Tennessee Riverkeeper, Inc. (Riverkeeper), a non-profit corporation, filed a lawsuit in the U.S. District Court for the Northern District of Alabama against 3M; BFI Waste Systems of Alabama; the City of Decatur, Alabama; and the Municipal Utilities Board of Decatur, Morgan County, Alabama. The complaint alleges that the defendants violated the Resource Conservation and Recovery Act in connection with the disposal of certain PFAS through their ownership and operation of their respective sites. The complaint further alleges such practices may present an imminent and substantial endangerment to health and/or the environment and that Riverkeeper has suffered and will continue to suffer irreparable harm caused by defendants’ failure to abate the endangerment unless the court grants the requested relief, including declaratory and injunctive relief.

In August 2016, a group of over 200 plaintiffs filed a class action against West Morgan-East Lawrence Water and Sewer Authority (Water Authority), 3M, Dyneon, Daikin, BFI, and the City of Decatur in state court in Lawrence County, Alabama. Plaintiffs are residents of Lawrence, Morgan and other counties who are or have been customers of the Water Authority. They contend defendants have released PFAS that contaminate the Tennessee River and, in turn, their drinking water, causing damage to their health and properties. In January 2017, the court in the St. John case, discussed above, stayed this litigation pending resolution of the St. John case.

In January 2017, several hundred plaintiffs sued 3M, its subsidiary Dyneon, and Daikin America in Lawrence and Morgan Counties, Alabama. The plaintiffs are owners of property, residents, and holders of property interests who receive their water from the West Morgan-East Lawrence Water and Sewer Authority (Water Authority). They assert common law claims for negligence, nuisance, trespass, wantonness, and battery, and they seek injunctive relief and punitive damages. The plaintiffs contend that the defendants own and operate manufacturing and disposal facilities in Decatur that have released and continue to release PFOA, PFOS and related chemicals into the groundwater and surface water of their sites, resulting in discharge into the Tennessee River. The plaintiffs also contend that the defendants have discharged into Bakers Creek and the Decatur Utilities Dry Creek Wastewater Treatment Plant, which, in turn, discharges wastewater containing these chemicals into the Tennessee River. The plaintiffs contend that, as a result of the alleged discharges, the water supplied by the Water Authority to the plaintiffs was, and is, contaminated with PFOA, PFOS, and related chemicals at a level dangerous to humans.

In November 2017, a purported class action (the “King” case) was filed against 3M, its subsidiary Dyneon, Daikin America, and the West Morgan-East Lawrence Water and Sewer Authority (Water Authority) in the U.S. District Court for the Northern District of Alabama. The plaintiffs are residents of Lawrence and Morgan County, Alabama who receive their water from the Water Authority. They assert various common law claims, including negligence, nuisance, wantonness, and fraudulent concealment, and they seek injunctive relief, attorneys’ fees, compensatory and punitive damages for their alleged personal injuries. The plaintiffs contend that the defendants own and operate manufacturing and disposal facilities in Decatur that have released and continue to release PFOA, PFOS and related chemicals into the groundwater and surface water of their sites, resulting in discharge into the Tennessee River. The plaintiffs also contend that the defendants have discharged chemicals into the Decatur Utilities Dry Creek Wastewater Treatment Plant, which, in turn, discharged wastewater containing these chemicals into the Tennessee River. The plaintiffs contend that, as a result of the alleged discharges, the water supplied by the Water Authority to the plaintiffs was, and is, contaminated with PFOA, PFOS, and related chemicals at a level dangerous to humans.

In January 2018, certain property owners in Trinity, Alabama filed a lawsuit against 3M, Dyneon, and three unnamed defendants in the U.S. District Court for the Northern District of Alabama. The plaintiffs assert claims for negligence, strict liability, trespass, nuisance, wanton and reckless conduct, and citizen suit claims for violation of the Resource Conservation and Recovery Act. They allege these claims arise from the defendants’ contamination of their property by disposal of PFAS in a landfill located on their property. The plaintiffs seek compensatory and punitive damages and a court order directing the defendants to remediate all PFAS contamination on their property. In September 2018, the case was dismissed by stipulation of the parties.

In September 2018, an individual plaintiff filed a lawsuit in the U.S. District Court for the Northern District of Alabama raising allegations and claims substantially similar to those asserted by plaintiffs in the King case. 3M has not yet been served in this case.

Litigation Related to Historical PFAS Manufacturing Operations in Minnesota

In July 2016, the City of Lake Elmo filed a lawsuit in the U.S. District Court for the District of Minnesota against 3M alleging that the City suffered damages from drinking water supplies contaminated with PFAS, including costs to construct alternative sources of drinking water. Trial is scheduled to begin in September 2019.

State Attorneys General Litigation related to PFAS

In December 2010, the State of Minnesota, by its Attorney General, filed a lawsuit in Hennepin County District Court against 3M to recover damages (including unspecified assessment costs and reasonable attorney’s fees) for alleged injury to, destruction of, and loss of use of certain of the State’s natural resources under the Minnesota Environmental Response and Liability Act (MERLA) and the Minnesota Water Pollution Control Act (MWPCA), as well as statutory nuisance and common law claims of trespass, nuisance, and negligence with respect to the presence of PFAS in the groundwater, surface water, fish or other aquatic life, and sediments (the “NRD Lawsuit”). The State also sought declarations under MERLA that 3M is responsible for all damages the State may suffer in the future for injuries to natural resources from releases of PFAS into the environment, and that 3M is responsible for compensation for future loss or destruction of fish, aquatic life, and other damages under the MWPCA. In September 2017, the State’s damages expert submitted a report that contended the State incurred $5 billion in damages. In November 2017, the State of Minnesota filed a motion for leave to amend its complaint to seek punitive damages from 3M, and 3M filed a motion for summary judgment contending, among other things, that the State’s claims were barred by the applicable statute of limitations. In December 2017, the court urged the parties to attempt to resolve the litigation before trial, and in January 2018, the court appointed a mediator to facilitate that process. In February 2018, 3M and the State of Minnesota reached a resolution of the NRD Lawsuit. Under the terms of the settlement, 3M agreed to provide an $850 million grant to the State for a special “3M Water Quality and Sustainability Fund.” This Fund will enable projects that support water sustainability in the Twin Cities East Metro region, such as continued delivery of water to residents and enhancing groundwater recharge to support sustainable growth. The projects will also result in habitat and recreation improvements, such as fishing piers, trails, and open space preservation. 3M recorded a pre-tax charge of $897 million, inclusive of legal fees and other related obligations, in the first quarter of 2018 associated with the resolution of this matter.

In June 2018, the State of New York, by its Attorney General, filed a lawsuit in Albany Country Supreme Court against 3M, Tyco Fire Products LP, Chemguard, Inc., Buckeye Fire Equipment Co., National Foam, Inc., and Kidde-Fenwal, Inc., seeking to recover (1) the costs incurred in responding to the contamination caused by Aqueous Film Forming Foam (AFFF) manufactured by 3M and others; (2) damages for injury to, destruction of, and loss of the State’s natural resources and related recreational series; and (3) property damage.

In July 2018, the governor of Michigan requested that the Michigan Attorney General file a lawsuit against 3M and others related to PFAS in a public letter. The Michigan Attorney General has not yet determined whether he will do so.

Aqueous Film Forming Foam (AFFF) Environmental Litigation

3M manufactured and marketed AFFF for use in firefighting at airports and military bases from approximately 1963 to 2000. As of September 30, 2018, 75 putative class action and other lawsuits have been filed against 3M and other defendants in various state and federal courts in Colorado, Delaware, Florida, Massachusetts, New York, Pennsylvania, and Washington where current or former airports, military bases, or fire training facilities are or were located. In these cases, plaintiffs typically allege that certain PFAS used in AFFF contaminated the soil and groundwater where AFFF was used and seek damages for loss of use and enjoyment of properties, diminished property values, investigation costs, remediation costs, and in some cases, personal injury and funds for medical monitoring. Several companies have been sued along with 3M, including Ansul Co. (acquired by Tyco, Inc.), Angus Fire, Buckeye Fire Protection Co., Chemguard, National Foam, Inc., and United Technologies Corp.

Other PFAS-related Environmental Litigation

3M manufactured and marketed certain products containing PFAS for use by customers in their manufacturing process. As of September 30, 2018, the following cases have been filed against 3M, another manufacturer, and their customers in connection with the use and disposal of these products.

In September 2017, three complaints were filed in the U.S. District Court for the Northern District of New York against 3M, Saint-Gobain Performance Plastics Corp. (“Saint-Gobain”), Honeywell International Inc. (“Honeywell”) and E.I. DuPont De Nemours and Company. Plaintiffs allege that 3M manufactured and sold PFOA that was used for manufacturing purposes at Saint-Gobain’s and Honeywell’s facilities located in the Village of Hoosick Falls and the Town of Hoosick. Plaintiffs claim that the drinking water around Hoosick Falls became contaminated with unsafe levels of PFOA due to the activities of the defendants, and allege that they suffered bodily injury due to the ingestion and inhalation of PFOA. Plaintiffs seek unstated compensatory, consequential, and punitive damages, as well as attorneys’ fees and costs.

In December 2017, plaintiffs filed a punitive class action in federal court against 3M, Wolverine World Wide and Waste Management, Inc., alleging negligence, trespass, intentional and negligent infliction of emotional distress, battery, products liability, public and private nuisance, fraudulent concealment, and unjust enrichment. Each count was filed against each defendant. The action arises from Wolverine’s allegedly improper disposal of materials and wastes related to their shoe manufacturing operations. Plaintiffs allege Wolverine used 3M Scotchgard in its manufacturing process and that chemicals from 3M’s product have contaminated the environment after being disposed of near drinking water sources. In addition to the federal court class action, as of September 30, 2018, 3M has been named a defendant in 122 private individual actions in Michigan state court based on similar allegations. 3M is aware of additional cases filed against Wolverine in Michigan state court in which 3M is likely to be added as a defendant in the future.

In Alabama, 3M is defending two lawsuits filed in state court by local public water suppliers relating to 3M’s sale of PFAS-containing products to carpet manufacturers in Georgia. The plaintiffs in these cases allege that the carpet manufacturers improperly discharged PFAS into the surface water and groundwater, contaminating drinking water supplies of cities located downstream along the Coosa River.

Other Environmental Litigation

In July 2018, the Company, along with more than 120 other companies, was served with a complaint seeking cost recovery and contribution towards the cleaning up of approximately eight miles of the Lower Passaic River in New Jersey. The plaintiff, Occidental Chemical Corporation, alleges that it agreed to design and pay the estimated $165 million cost to remove and cap sediment containing eight chemicals of concern, including PCBs and dioxins. The complaint seeks to spread those costs among the defendants, including the Company. The Company’s involvement in the case relates to its past use of two commercial drum conditioning facilities in New Jersey. Whether, and to what extent, the Company may be required to contribute to the costs at issue in the case remains to be determined.

For environmental litigation matters described above, no liability has been recorded as the Company believes liability in those matters is not probable and estimable and the Company is not able to estimate a possible loss or range of loss at this time.

Environmental Liabilities and Insurance Receivables

As of September 30, 2018, the Company had recorded liabilities of $29 million for estimated “environmental remediation” costs based upon an evaluation of currently available facts with respect to each individual site and also recorded related insurance receivables of $8 million. The Company records liabilities for remediation costs on an undiscounted basis when they are probable and reasonably estimable, generally no later than the completion of feasibility studies or the Company’s commitment to a plan of action. Liabilities for estimated costs of environmental remediation, depending on the site, are based primarily upon internal or third-party environmental studies, and estimates as to the number, participation level and financial viability of any other potentially responsible parties, the extent of the contamination and the nature of required remedial actions. The Company adjusts recorded liabilities as further information develops or circumstances change. The Company expects that it will pay the amounts recorded over the periods of remediation for the applicable sites, currently ranging up to 20 years.

As of September 30, 2018, the Company had recorded liabilities of $69 million for “other environmental liabilities” based upon an evaluation of currently available facts to implement the Settlement Agreement and Consent Order with the MPCA (including the best estimate of the probable liability under the settlement of the NRD Lawsuit for interim treatment of municipal and private wells), the remedial action agreement with ADEM, as well as presence in the soil and groundwater at the Company’s manufacturing facilities in Decatur, Alabama, and Cottage Grove, Minnesota, and at two former disposal sites in Washington County, Minnesota (Oakdale and Woodbury). The Company expects that most of the spending will occur over the next four years.

It is difficult to estimate the cost of environmental compliance and remediation given the uncertainties regarding the interpretation and enforcement of applicable environmental laws and regulations, the extent of environmental contamination and the existence of alternative cleanup methods. Developments may occur that could affect the Company’s current assessment, including, but not limited to: (i) changes in the information available regarding the environmental impact of the Company’s operations and products; (ii) changes in environmental regulations, changes in permissible levels of specific compounds in drinking water sources, or changes in enforcement theories and policies, including efforts to recover natural resource damages; (iii) new and evolving analytical and remediation techniques; (iv) success in allocating liability to other potentially responsible parties; and (v) the financial viability of other potentially responsible parties and third-party indemnitors. For sites included in both “environmental remediation liabilities” and “other environmental liabilities,” at which remediation activity is largely complete and remaining activity relates primarily to operation and maintenance of the remedy, including required post-remediation monitoring, the Company believes the exposure to loss in excess of the amount accrued would not be material to the Company’s consolidated results of operations or financial condition. However, for locations at which remediation activity is largely ongoing, the Company cannot estimate a possible loss or range of loss in excess of the associated established accruals for the reasons described above.

Other Matters

Department of Labor Investigation

The U.S. Department of Labor (DOL) notified 3M in April 2015 that it had commenced an investigation of 3M’s pension plan pursuant to the federal Employee Retirement Income Security Act of 1974, as amended (ERISA). The DOL has stated its investigation relates to certain private equity investments, plan expenses, securities lending, and distributions of plan benefits. In response to certain DOL requests, 3M produced documents and made employees available for interviews. In December 2016, the DOL issued certain subpoenas to 3M and 3M Investment Management Corp. relating to this investigation. 3M has produced additional responsive documents and is cooperating with the DOL in its investigation. In June 2018, the DOL issued a letter indicating that it did not intend to take further action.

Product Liability Litigation

As of September 30, 2018, the Company is a named defendant in lawsuits involving approximately 4,955 plaintiffs (compared to approximately 4,270 plaintiffs at December 31, 2017) who allege the Bair Hugger™ patient warming system caused a surgical site infection. Nearly all of the lawsuits are pending in federal court in Minnesota. The plaintiffs claim they underwent various joint arthroplasty, cardiovascular, and other surgeries and later developed surgical site infections due to the use of the Bair Hugger™ patient warming system (the Bair Hugger™ product line was acquired by 3M as part of the 2010 acquisition of Arizant, Inc., a leading manufacturer of patient warming solutions designed to prevent hypothermia and maintain normal body temperature in surgical settings). The complaints seek damages and other relief based on theories of strict liability, negligence, breach of express and implied warranties, failure to warn, design and manufacturing defect, fraudulent and/or negligent misrepresentation/concealment, unjust enrichment, and violations of various state consumer fraud, deceptive or unlawful trade practices and/or false advertising acts. One case, from the U.S. District Court for the Western District of Tennessee is a putative nationwide class action. The U.S. Judicial Panel on Multidistrict Litigation (MDL) granted the plaintiffs’ motion to transfer and consolidate all cases pending in federal courts to the U.S. District Court for the District of Minnesota to be managed in a multi-district proceeding during the pre-trial phase of the litigation. In 2017, the U.S. District Court and the Minnesota state courts denied the plaintiffs’ motions to amend their complaints to add claims for punitive damages. At a joint hearing before the U.S. District Court and the Minnesota State court, on the parties’ motion to exclude each other’s experts, and 3M’s motion for summary judgment with respect to general causation, the federal court did not exclude the plaintiffs’ experts and denied 3M’s motion for summary judgment on general causation. In January 2018, the state court, in hearing the same arguments, excluded plaintiffs’ experts and granted 3M’s motion for summary judgment on general causation, dismissing all 61 cases pending before the state court in Minnesota. Plaintiffs have appealed that ruling and the state court’s punitive damages ruling, and oral argument before the Minnesota Court of Appeals is scheduled in November 2018. In April 2018, the federal court partially granted 3M’s motion for summary judgment in the first bellwether case, leaving for trial a claim for strict liability based upon design defect. The court dismissed the plaintiff’s claims for negligence, failure to warn, and common law and statutory fraud. In the trial of the first bellwether case in May 2018, the jury returned a unanimous verdict in 3M’s favor finding that the Bair Hugger™ patient warming system was not defective and was not the cause of the plaintiff’s injury.

In June 2016, the Company was served with a putative class action filed in the Ontario Superior Court of Justice for all Canadian residents who underwent various joint arthroplasty, cardiovascular, and other surgeries and later developed surgical site infections due to the use of the Bair Hugger™ patient warming system. The representative plaintiff seeks relief (including punitive damages) under Canadian law based on theories similar to those asserted in the MDL. No liability has been recorded for the Bair Hugger™ litigation because the Company believes that any such liability is not probable and estimable at this time.

In September 2011, 3M Oral Care launched Lava Ultimate CAD/CAM dental restorative material. The product was originally indicated for inlay, onlay, veneer, and crown applications. In June 2015, 3M Oral Care voluntarily removed crown applications from the product’s instructions for use, following reports from dentists of patients’ crowns debonding, requiring additional treatment. The product remains on the market for other applications. 3M communicated with the U.S. Food and Drug Administration, as well as regulators outside the United States. 3M also informed customers and distributors of its action, offered to accept return of unused materials and provide refunds. In May 2018, 3M reached a preliminary settlement for an amount that did not have a material impact to the Company of the lawsuit pending in the U.S. District Court for the District of Minnesota that sought certification of a class of dentists in the United States and its territories. The settlement is subject to the court’s approval and certification of the settlement class, with a right of class members to opt-out of the settlement and bring individual claims against the Company.

For product liability litigation matters described in this section for which a liability has been recorded, the Company believes the amount recorded is not material to the Company’s consolidated results of operations or financial condition. In addition, the Company is not able to estimate a possible loss or range of loss in excess of the established accruals at this time.