8-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 8-K

CURRENT REPORT

Pursuant to Section 13 OR 15(d)

of The Securities Exchange Act of 1934

Date of Report (Date of earliest event reported) April 2, 2020

LEGGETT & PLATT, INCORPORATED

(Exact name of registrant as specified in its charter)

Missouri	001-07845	44-0324630
(State or other jurisdiction of incorporation)	(Commission File Number)	(IRS Employer Identification No.)

No. 1 Leggett Road, Carthage, MO	64836
(Address of principal executive offices)	(Zip Code)

Registrant’s telephone number, including area code 417-358-8131

N/A

(Former name or former address, if changed since last report.)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):

☐ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

☐ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

☐ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

☐ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common Stock, $.01 par value	LEG	New York Stock Exchange

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).

Emerging growth company  ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Item 2.02 Results of Operations and Financial Condition.

The information provided in Item 7.01, including Exhibit 99.1, and Item 8.01 is incorporated herein by reference.

Item 7.01 Regulation FD Disclosure.

On April 2, 2020, Leggett & Platt, Incorporated (the “Company”) issued a press release announcing that, although it is currently unable to quantify the magnitude of the impact, it expects 2020 results to be materially adversely impacted by the economic impacts of the outbreak of a respiratory illness known as COVID-19 (“COVID-19”). As a result, the Company is withdrawing its annual financial guidance for 2020 previously issued on February 3, 2020. The full text of the press release is attached as Exhibit 99.1 to this Current Report on Form 8-K and is incorporated herein by reference.

Item 8.01 Other Events.

In light of the rapidly changing COVID-19 outbreak, the Company is filing this Current Report on Form 8-K for the purpose of supplementing the Risk Factors disclosed in Item 1A of its Annual Report on Form 10-K for the fiscal year ended December 31, 2019, filed February 20, 2020. Although the Company remains confident that it has sufficient liquidity and access to resources to continue operating its businesses, it is supplementing its risk factors as follows:

The COVID-19 outbreak has had, and could further have, an adverse impact to (i) the demand for our products and our customers’ products, (ii) our manufacturing facilities’ ability to remain open, obtain necessary raw materials and parts, maintain appropriate labor levels and ship finished products to customers, (iii) operating costs related to pay and benefits for our employees, (iv) the collection of trade and other notes receivables in accordance with their terms, (v) potential impairment of goodwill and long-lived assets, and (vi) our ability to access the commercial paper market or borrow under our revolving credit facility; all of which, in the aggregate, have had, and could further have, a material negative impact on our sales, earnings, liquidity, cash flow and financial condition.

Governments and health organizations have identified an outbreak of a respiratory illness caused by a virus known as SARS-CoV-2 causing the COVID-19 outbreak. The World Health Organization has declared the outbreak a global pandemic. It was first detected in Wuhan City, Hubei Province, China, but has spread within China and all over the world. Various governments in Asia, Europe, North America, and elsewhere have instituted quarantines, shelter-in-place or stay-at-home orders, or restrictions on public gatherings as well as limitations on social interactions. These restrictions and limitations have had, and could further have, an adverse effect on the economies and financial markets of the countries where our products, or our customers’ products, are sold resulting in an economic downturn that has had, and could further have, an effect on our customers’ demand for our products. This decrease in demand has already caused us to shut down some of our manufacturing facilities and limit production in other facilities. As a result of the decreased demand, our sales, earnings, liquidity, cash flow and financial condition have been and could be further materially negatively affected.

We sell some of our products to certain manufacturing customers, particularly in the automotive industry, that have facilities where their workforce is unionized. Some unions have already put pressure on manufacturers to close plants because of the COVID-19 outbreak. It is possible that these unions may institute work stoppages based on the health and safety concerns of union members contracting COVID-19 in our customers’ facilities. A work stoppage for any length of time could stop or reduce production in our customers’ facilities, negatively impacting the demand for our finished products, and materially negatively impacting our sales, earnings, liquidity, cash flow and financial condition.

2

We have manufacturing facilities in the United States and 17 other countries. All of these countries have been affected by the COVID-19 outbreak. Certain of our facilities around the world have been closed because of the COVID-19 outbreak while others have experienced problems delivering products to customers because of disruption in logistics necessary to import, export, or to transfer products across borders. Depending on the progression of the COVID-19 outbreak, our ability to keep our manufacturing operations open, maintain appropriate labor levels, obtain necessary raw materials and parts and ship finished products to customers may be partially or completely disrupted, either on a temporary or prolonged basis. The realization of these risks to our manufacturing facilities, labor force and supply chain could increase labor, commodity and energy costs, and has had, and could further have a material negative impact on our sales, earnings, liquidity, cash flow and financial condition.

We have been and could be further negatively affected by governmental action in any one or more of the countries in which we operate by the imposition of even more restrictive measures concerning shelter-in-place or stay-at-home, public gatherings and human interactions, mandatory closures of our facilities or retail establishments that sell our products or our customers’ products, and restrictions on the import or export of products. Some governments have already required the temporary closure of some of our manufacturing facilities. Also, additional regulation or requirements with respect to pay and benefits for our employees could also have an adverse effect on our business.

To date, we have had a small number of employees in our manufacturing facilities who have tested positive for COVID-19. Accordingly, we have temporarily closed the affected facilities for sanitization and for a period of quarantine. If we have other employees in other facilities that test positive for COVID-19, we will temporarily close these facilities as well. Unless we are able to shift production to other manufacturing facilities, plant closures or the absence of a necessary labor force may disrupt our ability to produce and deliver finished products to our customers.

We conduct annual goodwill impairment testing in the second quarter and more often if an event or circumstance occurs making it likely that impairment exists. In addition, we test for the recoverability of long-lived assets at year end and more often if an event or circumstance indicates the carrying value may not be recoverable. If there is a prolonged adverse economic impact from the COVID-19 outbreak, we may not be able to achieve projected performance levels. If actual results differ from the assumptions and estimates used in the goodwill and long-lived asset valuation calculations, we could incur impairment charges, particularly in our Bedding and Hydraulic Cylinders reporting units, which had $856 million and $26 million of goodwill as of December 31, 2019, respectively. These non-cash charges could have a material negative impact on our earnings. 

We have been and could be further affected by the inability to collect trade receivables or other notes receivable, in accordance with their terms, from customers and other third parties that have been adversely affected by the social and governmental restrictions and limitations related to the COVID-19 outbreak. These limitations and restrictions have had an adverse effect on the economies and financial markets of the countries where these customers and third parties are located or sell their finished products. If we are unable to collect trade receivables and other notes receivables on a timely basis, this inability will have a negative impact on our earnings, liquidity, cash flow and financial condition.

The COVID-19 outbreak has also negatively impacted liquidity in the commercial paper market. Our inability to issue commercial paper in appropriate amounts and tenor, for cash management purposes, could cause us to borrow under our revolving credit facility which serves as support for our commercial paper program. If this were to happen, we would incur higher interest costs. In addition, if our earnings are reduced, the covenants in the revolving credit facility will reduce our borrowing capacity, both under the credit facility or through commercial paper issuances. Depending on the degree of earnings reduction, our liquidity could be materially negatively impacted.

3

We believe the COVID-19 outbreak has already materially negatively impacted our sales, earnings, liquidity, cash flow and financial condition and could continue to do so in the foreseeable future. However, the overall quantitative and qualitative effect of the COVID-19 outbreak on our business is currently unknown.

Item 9.01 Financial Statements and Exhibits.

(d) Exhibits.

EXHIBIT INDEX

Exhibit No.		Description
	99.1*	Press Release dated April 2, 2020
	101.INS	Inline XBRL Instance Document (the instance document does not appear in the interactive data file because its XBRL tags are embedded within the inline XBRL document)
	101.SCH **	Inline XBRL Taxonomy Extension Schema
	101.LAB **	Inline XBRL Taxonomy Extension Label Linkbase
	101.PRE **	Inline XBRL Taxonomy Extension Presentation Linkbase
	104	Cover Page Interactive Data File (embedded within the inline XBRL document contained in Exhibit 101)

*   Denotes furnished herewith.

** Denotes filed herewith.

4

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

	LEGGETT & PLATT, INCORPORATED
Date: April 2, 2020	By:	/s/ Scott S. Douglas
		Scott S. Douglas
		Senior Vice President – General Counsel & Secretary

5

EX-99.1

Exhibit 99.1

            

FOR IMMEDIATE RELEASE: APRIL 2, 2020                     

LEGGETT & PLATT PROVIDES UPDATE IN RESPONSE TO COVID-19 IMPACT

Carthage, MO, April 2, 2020 —

• Withdraws 2020 Guidance

• Solid Balance Sheet and Liquidity Profile

• Limits format of Annual Shareholders Meeting

Diversified manufacturer Leggett & Platt provided an update on actions it is taking in response to the impact of the COVID-19 pandemic on its business.

Chairman and CEO Karl Glassman commented, “Our first priority is the health and safety of our employees and their families, along with our customers and suppliers, and the communities we serve around the world. We have instituted social distancing and robust health and hygiene practices in our facilities, and our employees are working remotely where possible. We are also continuing to restrict travel for all employees. We are monitoring the situation closely on an ongoing basis and will take further action as appropriate.”

Given the rapidly changing environment, the Company is withdrawing its 2020 guidance issued February 3, which did not include possible impacts from COVID-19. The Company will provide more detail on the impact from COVID-19 across its operations when it reports first quarter 2020 earnings on May 4.

To date, Leggett has experienced significant reductions in demand in many of its markets. The Company has temporarily closed some facilities due to declining demand, government orders and/or concerns over employee safety.

Leggett remains intently focused on and committed to balance sheet strength. The Company expects to meet its current liquidity needs from operating cash flow and its access to the commercial paper market. The Company has no significant debt maturities until August 2022. Additionally, Leggett is taking the necessary steps to reduce expenses, manage costs, and reduce or defer capital spending. The Company continues to closely manage its working capital.

The Company also announced that due to health concerns associated with the COVID-19 outbreak, it will limit the Annual Shareholders Meeting to only the formal business meeting as described in the agenda in the Company’s Proxy Statement dated March 31, 2020. The Company does not plan to make traditional product or any other presentations.

Leggett has successfully navigated several challenging business and economic conditions in its 137-year history. With its diversified businesses, solid balance sheet, and access to capital the Company continues to believe it is well-positioned for long-term success as it manages through this latest challenge.

- - - - - - - - - - - - - - - - -

FOR MORE INFORMATION: Visit Leggett’s website at www.leggett.com.

COMPANY DESCRIPTION: At Leggett & Platt (NYSE: LEG), we create innovative products that enhance people’s lives, generate exceptional returns for our shareholders, and provide sought-after jobs in communities around the world. L&P is a 137-year-old diversified manufacturer that designs and produces engineered products found in most homes and automobiles. The company is comprised of 15 business units, 22,000 employee-partners, and 140 manufacturing facilities located in 18 countries.

Leggett & Platt is the leading U.S.-based manufacturer of: a) bedding components; b) automotive seat support and lumbar systems; c) specialty bedding foams and private-label finished mattresses; d) components for home furniture and work furniture; e) flooring underlayment; f) adjustable beds; and g) bedding industry machinery.

FORWARD-LOOKING STATEMENTS: This press release contains “forward-looking statements,” including our ability to meet current liquidity needs from operating cash flow and access to the commercial paper market, our ability to reduce expenses, manage costs, and reduce or defer capital spending, as well as manage working capital, our ability to maintain the strength of our portfolio of businesses, balance sheet and access to capital, and our ability to achieve long-term success. These statements are identified either by the context in which they appear or by use of words such as “expect,” “believe,” “plan” or the like. Such forward-looking statements are expressly qualified by the cautionary statements described in this provision and reflect only the beliefs of Leggett or its management at the time the statement is made. Because all forward-looking statements deal with the future, they are subject to risks, uncertainties and developments which might cause actual events or results to differ materially from those envisioned or reflected in any forward-looking statement. Moreover, we do not have, and do not undertake, any duty to update or revise any forward-looking statement to reflect events or circumstances after the date on which the statement was made. Some of these risks and uncertainties include: (i) the impact on the Company’s business resulting from the respiratory illness known as COVID-19 including a negative impact on our earnings, cash flow, financial condition and reduced demand for our products, shutdowns of our manufacturing facilities due to declining demand, governmental orders and/or concerns over employee safety, our manufacturing facilities’ ability to remain open, obtain necessary raw materials and parts, maintain appropriate labor levels and ship finished products to customers, increased operating costs related to pay and benefits for our employees, the collection of trade and other notes receivables in accordance with their terms and our ability to access the commercial paper market; (ii) the Company’s ability to achieve its operating targets; (iii) inability to comply with the restrictive covenants in the Company’s credit agreement and the impact on our liquidity; (iv) increases or decreases in our capital needs, which may vary depending on acquisition or divestiture activity, our working capital needs and capital expenditures; (v) market conditions; (vi) price and product competition from foreign and domestic competitors, changes in cost and availability of raw materials and labor, fuel and energy costs, our ability to increase the dividend, our ability to repatriate cash from offshore accounts, net interest expense, tax rates, increased trade costs, cybersecurity breaches, customer losses and insolvencies, disruption to our steel rod mill, climate change regulations, environmental, social and governance risks, general economic conditions, possible goodwill or other asset impairment, foreign currency fluctuation, the amount of fully diluted shares, depreciation and amortization, and litigation risks; and (vii) other risk factors in the “Forward-Looking Statements” and “Risk Factors” sections in Leggett’s most recent Form 10-K and subsequent Form 10-Q and Form 8-K reports filed with the SEC.

CONTACT:    Investor Relations, (417) 358-8131 or invest@leggett.com

Susan R. McCoy, Senior Vice President, Investor Relations

Wendy M. Watson, Vice President, Investor Relations

Cassie J. Branscum, Manager, Investor Relations

P. O. BOX 757   •   NO. 1 LEGGETT ROAD  •   CARTHAGE, MISSOURI 64836-0757  •  417/358-8131

2

XML

Document and Entity Information	Apr. 02, 2020
Cover [Abstract]
Entity Registrant Name	LEGGETT & PLATT INC
Amendment Flag	false
Entity Central Index Key	0000058492
Document Type	8-K
Document Period End Date	Apr. 02, 2020
Entity Incorporation State Country Code	MO
Entity File Number	001-07845
Entity Tax Identification Number	44-0324630
Entity Address, Address Line One	No. 1 Leggett Road,
Entity Address, City or Town	Carthage
Entity Address, State or Province	MO
Entity Address, Postal Zip Code	64836
City Area Code	417
Local Phone Number	358-8131
Written Communications	false
Soliciting Material	false
Pre Commencement Tender Offer	false
Pre Commencement Issuer Tender Offer	false
Security 12b Title	Common Stock, $.01 par value
Trading Symbol	LEG
Security Exchange Name	NYSE
Entity Emerging Growth Company	false