10-K

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

Form 10-K

[X]	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
	For the fiscal year ended December 31, 2007
	or
[ ]	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
	For the transition period from               to

Commission file number 1-4797

ILLINOIS TOOL WORKS INC.

(Exact Name of Registrant as Specified in its Charter)

Delaware	36-1258310
(State or Other Jurisdiction of Incorporation or Organization)	(I.R.S. Employer Identification No.)
3600 W. Lake Avenue, Glenview, Illinois	60026-1215
(Address of Principal Executive Offices)	(Zip Code)

Registrant’s telephone number, including area code: (847) 724-7500

Securities registered pursuant to Section  12(b) of the Act:

Title of Each Class	Name of Each Exchange on Which Registered
Common Stock	New York Stock Exchange Chicago Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes  X           No       

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Yes                 No  X 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes  X           No       

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  [    ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer  X           Accelerated filer       

Non-accelerated filer        (Do not check if a smaller reporting company.) Smaller reporting company       

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes                 No  X 

The aggregate market value of the voting stock held by non-affiliates of the registrant as of June 29, 2007 was approximately $24,300,000,000, based on the New York Stock Exchange closing sales price as of June 29, 2007.

Shares of Common Stock outstanding at January 31, 2008 — 526,912,512.

Documents Incorporated by Reference

2007 Annual Report to Stockholders	Parts I, II, IV
2008 Proxy Statement for Annual Meeting of Stockholders to be held on May 2, 2008	Part III

TABLE OF CONTENTS

PART I
	ITEM 1. Business
First Amendment to the ITW Nonqualified Pension Benefits Plan
Amendment to the Directors' Deferred Fee Plan
ITW Stock Option Plan Terms of the Option Grant
Amendment to the 2006 Stock Incentive Plan
The Company's 2007 Annual Report to Stockholders
Subsidiaries and Affiliates of the Company
Consent of Independent Registered Public Accounting Firm
Powers of Attorney
Rule 13a-14(a) Certification
Section 1350 Certification

PART I

ITEM 1.  Business

General

Illinois Tool Works Inc. (the “Company” or “ITW”) was founded in 1912 and incorporated in 1915. The Company is a multinational manufacturer of a diversified range of industrial products and equipment with approximately 825 operations in 52 countries. During 2007, the Company changed its internal management reporting. These 825 businesses are internally reported as 60 operating segments to senior management. The Company’s 60 operating segments have been aggregated into the following eight reportable segments for external purposes:

Industrial Packaging:  Businesses in this segment produce steel, plastic and paper products used for bundling, shipping and protecting transported goods.

In the Industrial Packaging segment, products include:

•  steel and plastic strapping and related tools and equipment;

•  plastic stretch film and related equipment;

•  paper and plastic products that protect goods in transit; and

•  metal jacketing and other insulation products.

Power Systems & Electronics:  Businesses in this segment produce equipment and consumables associated with specialty power conversion, metallurgy and electronics.

In the Power Systems & Electronics segment, products include:

•  arc welding equipment;

•  metal arc welding consumables and related accessories;

•  metal solder materials for PC board fabrication;

•  equipment and services for microelectronics assembly;

•  electronic components and component packaging; and

•  airport ground support equipment.

Transportation:  Businesses in this segment produce components, fasteners, fluids and polymers for transportation-related applications.

In the Transportation segment, products include:

•  metal and plastic components and assemblies for automobiles and trucks;

•  metal and plastic fasteners for automobiles and trucks;

•  fluids and polymers for maintenance and appearance;

•  fillers and putties for auto body repair; and

•  polyester coatings and patch and repair products for the marine industry.

Construction Products:  Businesses in this segment produce tools, fasteners and other products for construction applications.

In the Construction Products segment, products include:

•  fasteners and related fastening tools for wood applications;

•  anchors, fasteners and related tools for concrete applications;

2

•  metal plate truss components and related equipment and software; and

•  packaged hardware, fasteners, anchors and other products for retail.

Food Equipment:  Businesses in this segment produce commercial food equipment and related service.

In the Food Equipment segment, products include:

•  warewashing equipment;

•  cooking equipment, including ovens, ranges and broilers;

•  refrigeration equipment, including refrigerators, freezers and prep tables;

•  food processing equipment, including slicers, mixers and scales; and

•  kitchen exhaust, ventilation and pollution control systems.

Decorative Surfaces:  Businesses in this segment produce decorative surfacing materials for countertops, flooring, furniture and other applications.

In the Decorative Surfaces segment, products include:

•  decorative high-pressure laminate for countertops;

•  solid surface materials for countertops;

•  high-pressure laminate flooring;

•  laminate for furniture applications; and

•  high-pressure laminate worktops.

Polymers & Fluids:  Businesses in this segment produce adhesives, sealants, lubrication and cutting fluids, and janitorial and sanitation supplies.

In the Polymers & Fluids segment, products include:

•  adhesives for industrial, construction and consumer purposes;

•  chemical fluids which clean or add lubrication to machines;

•  epoxy and resin-based coating products for industrial applications;

•  hand wipes and cleaners for industrial applications; and

•  die-cut components for telecommunications, medical and transportation applications.

All Other:  This segment includes all other operating segments.

In the All Other segment, products include:

•  plastic reclosable packaging for consumer food storage;

•  plastic reclosable bags for storage of clothes and home goods;

•  plastic consumables that multi-pack cans and bottles and related equipment;

•  plastic fasteners and components for appliances, furniture and industrial uses;

•  metal fasteners and components for appliances and industrial applications;

•  equipment and related software for testing of materials and structures;

•  software and related services for industrial and health care applications;

•  swabs, wipes and mats for clean room usage;

•  foil and film and related equipment used to decorate consumer products;

3

•  product coding and marking equipment and related consumables;

•  paint spray equipment; and

•  static and contamination control equipment.

Segment Reporting Change

In prior periods, the Company’s operations were aggregated and organized into the following four segments: Engineered Products — North America; Engineered Products — International; Specialty Systems — North America; and Specialty Systems — International. The segment information in prior years has been restated to conform to the new segment presentation.

80/20 Business Process

A key element of the Company’s business strategy is its continuous 80/20 business process for both existing businesses and new acquisitions. The basic concept of this 80/20 business process is to focus on what is most important (the 20% of the items which account for 80% of the value) and to spend less time and resources on the less important (the 80% of the items which account for 20% of the value). The Company’s operations use this 80/20 business process to simplify and focus on the key parts of their business, and as a result, reduce complexity that often disguises what is truly important. The Company’s 825 operations utilize the 80/20 process in various aspects of their business. Common applications of the 80/20 business process include:

•  Simplifying product lines by reducing the number of products offered by combining the features of similar products, outsourcing products or, as a last resort, eliminating low-value products.

•  Segmenting the customer base by focusing on the 80/20 customers separately and finding alternative ways to serve the 20/80 customers.

•  Simplifying the supplier base by partnering with 80/20 suppliers and reducing the number of 20/80 suppliers.

•  Designing business processes, systems and measurements around the 80/20 activities.

The result of the application of this 80/20 business process is that the Company has consistently improved its operating and financial performance. These 80/20 efforts can result in restructuring projects that reduce costs and improve margins. Corporate management works closely with those business units that have operating results below expectations to help those units better apply this 80/20 business process and improve their results.

Discontinued Operations

In 2007 and 2006, the Company completed the divestitures of certain construction, consumer packaging and automotive machinery businesses and recognized after-tax gains on disposal of $40.2 million in 2007, including a tax benefit of $7.0 million, and $14.3 million in 2006, net of tax expense of $4.8 million. In addition, a consumer packaging and an automotive components business have been classified as held for sale as of December 31, 2007.

In 2004 and 2003, the Company sold the former Consumer Products segment, which was comprised of the following businesses: Precor specialty exercise equipment, West Bend small appliances and premium cookware, and Florida Tile ceramic tile. The Company’s net loss on disposal of the segment was $0.9 million in 2004 and $16.5 million in 2003.

Current Year Developments

Refer to pages 30 through 47, Management’s Discussion and Analysis, in the Company’s 2007 Annual Report to Stockholders.

4

Financial Information about Segments and Markets

Segment and geographic data and operating results of the segments are included on pages 32 through 40 and 70 through 72 of the Company’s 2007 Annual Report to Stockholders.

The principal end markets served by the Company’s eight segments are as follows:

	% of 2007 Operating Revenues by Segment
				Power
	Industrial			Systems &			Transpor-			Construction			Food			Decorative			Polymers			All
End Markets Served	Packaging			Electronics			tation			Products			Equipment			Surfaces			& Fluids			Other
Commercial Construction		7	%		8	%		—	%		28	%		—	%		52	%		9	%		1	%
Residential Construction		6			1			—			39			—			18			3			1
Renovation Construction		1			1			—			29			—			21			2			—
General Industrial		21			36			2			1			—			9			32			22
Automotive OEM and Tiers		1			5			72			—			—			—			5			5
Automotive Aftermarket		1			1			21			—			—			—			8			1
Food Institutional/Restaurant and Service		—			—			—			—			95			—			4			1
Consumer Durables		3			1			2			—			—			—			4			21
Food and Beverage		13			—			—			—			—			—			4			17
Electronics		1			20			—			1			—			—			3			9
Primary Metals		25			2			—			—			—			—			3			1
All Other		21			25			3			2			5			—			23			21
		100	%		100	%		100	%		100	%		100	%		100	%		100	%		100	%

The Company’s businesses primarily distribute their products directly to industrial manufacturers and through independent distributors.

Backlog

Backlog generally is not considered a significant factor in the Company’s businesses as relatively short delivery periods and rapid inventory turnover are characteristic of most of its products. Backlog by segment as of December 31, 2007 and 2006 is summarized as follows:

In Thousands	2007		2006
Industrial Packaging	$	150,000	$	122,000
Power Systems & Electronics		153,000		147,000
Transportation		118,000		131,000
Construction Products		26,000		35,000
Food Equipment		227,000		145,000
Decorative Surfaces		39,000		22,000
Polymers & Fluids		61,000		35,000
All Other		384,000		414,000
Total	$	1,158,000	$	1,051,000

Backlog orders scheduled for shipment beyond calendar year 2008 were not material as of December 31, 2007.

The information set forth below is applicable to all industry segments of the Company unless otherwise noted:

Competition

The Company’s global competitive environment is complex because of the wide diversity of products the Company manufactures and the many markets it serves. Depending on the product or market, the Company may compete with a limited number of companies or with many others. The Company is a leading producer of plastic

5

and metal components and fasteners; industrial packaging machinery and related consumables; welding products and related consumables; automotive aftermarket maintenance and appearance products; food service equipment; laminate products; polymers and fluid products; consumer packaging; materials testing equipment; and industrial finishing equipment.

Raw Materials

The Company uses raw materials of various types, primarily metals, plastics, paper and chemicals, that are available from numerous commercial sources. The availability of materials and energy has not resulted in any significant business interruptions or other major problems, and no such problems are anticipated.

Research and Development

The Company’s growth has resulted from developing new and improved products, broadening the application of established products, continuing efforts to improve and develop new methods, processes and equipment, and from acquisitions. Many new products are designed to reduce customers’ costs by eliminating steps in their manufacturing processes, reducing the number of parts in an assembly, or by improving the quality of customers’ assembled products. Typically, the development of such products is accomplished by working closely with customers on specific applications. Identifiable research and development costs are set forth on page 54 of the Company’s 2007 Annual Report to Stockholders.

The Company owns approximately 3,800 unexpired United States patents covering articles, methods and machines. Many counterparts of these patents have also been obtained in various foreign countries. In addition, the Company has approximately 1,700 applications for patents pending in the United States Patent Office, but there is no assurance that any patent will be issued. The Company maintains an active patent department for the administration of patents and processing of patent applications.

The Company believes that many of its patents are valuable and important. Nevertheless, the Company credits its leadership in the markets it serves to engineering capability; manufacturing techniques; skills and efficiency; marketing and sales promotion; and service and delivery of quality products to its customers. The expiration of any one of the Company’s patents would not have a material effect on the Company’s results of operations or financial position.

Trademarks

Many of the Company’s products are sold under various owned or licensed trademarks, which are important to the Company. Among the most significant are: ITW, Acme, Alpine, Angleboard, Apex, Ark-Les, Bernard, Betaprint, Binks, Buehler, Buildex, Chemtronics, Click Commerce, Covid, Deltar, Densit, Devcon, DeVilbiss, Dymon, Dynatec, Electrocal, Evercoat, E-Z Anchor, Fastex, Filtertek, Foilmark, Forte, Foster, Franklynn, Futura Coatings, Gema, Hi-Cone, Hobart, Instron, Intellibuild, Keps, Kester, Krafft, Lachenmeier, Lebo, LPS, Magna, Magnaflux, Meyercord, Miller, Mima, Minigrip, Nexus, NorDen, Orbitalum, Orgapack, Paktron, Paslode, Permatex, Plexus, Polymark, Pro/Mark, Pryda, QMI, Racor, Ramset, Ransburg, Red Head, Resopal, Reyflex, Rippey, Rockwell, Rocol, Shakeproof, Shore, Signode, Simco, Space Bag, Spectrum, Speedline, Spiroid, SPIT, Stero, Strapex, Tapcon, Teks, Tempil, Tenax, Texwipe, Traulsen, Tregaskiss, Truswal Systems, Valeron, Versachem, Vulcan, WERCS, Wilsonart, Wynn’s and Zip-Pak.

Environmental

The Company believes that its plants and equipment are in substantial compliance with all applicable environmental regulations. Additional measures to maintain compliance are not expected to materially affect the Company’s capital expenditures, competitive position, financial position or results of operations.

Various legislative and administrative regulations concerning environmental issues have become effective or are under consideration in many parts of the world relating to manufacturing processes and the sale or use of certain products. To date, such developments have not had a substantial adverse impact on the Company’s

6

revenues or earnings. The Company has made considerable efforts to develop and sell environmentally compatible products.

Employees

The Company employed approximately 60,000 persons as of December 31, 2007 and considers its employee relations to be excellent.

International

The Company’s international operations include subsidiaries and joint ventures in 51 foreign countries on six continents. These operations serve such end markets as construction, general industrial, automotive, food institutional/restaurant and service, food and beverage, consumer durables, electronics, primary metals and others on a worldwide basis. The Company’s international operations contributed approximately 49% of revenues in 2007, 43% of revenues in 2006 and 42% of revenues in 2005.

Refer to pages 30 through 47 and page 72 in the Company’s 2007 Annual Report to Stockholders for additional information on international activities. International operations are subject to certain risks inherent in conducting business in foreign countries, including price controls, exchange controls, limitations on participation in local enterprises, nationalization, expropriation and other governmental action, and changes in currency exchange rates.

Forward-Looking Statements

This annual report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including, without limitation, statements regarding availability of raw materials and energy, the expiration of any one of the Company’s patents, the cost of compliance with environmental regulations, the adequacy of internally generated funds, the meeting of dividend payout objectives, the ability to fund debt service obligations, payments under guarantees, the Company’s portion of future benefit payments related to pension and postretirement benefits, the availability of additional financing, the outcome of outstanding legal proceedings, the impact of adopting new accounting pronouncements and the estimated amount of unrecognized tax benefits. These statements are subject to certain risks, uncertainties, and other factors, which could cause actual results to differ materially from those anticipated. Important risks that may influence future results include (1) a downturn or further downturn in the construction, general industrial, automotive or food institutional/restaurant and service markets, (2) deterioration in international and domestic business and economic conditions, particularly in North America, Europe, Asia or Australia, (3) the unfavorable impact of foreign currency fluctuations and costs of raw materials, (4) an interruption in, or reduction in, introducing new products into the Company’s product lines, (5) an unfavorable environment for making acquisitions, domestic and international, including adverse accounting or regulatory requirements and market values of candidates, and (6) unfavorable tax law changes and tax authority rulings. The risks covered here are not all inclusive and given these and other possible risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.

ITW practices fair disclosure for all interested parties. Investors should be aware that while ITW regularly communicates with securities analysts and other investment professionals, it is against ITW’s policy to disclose to them any material non-public information or other confidential commercial information. Shareholders should not assume that ITW agrees with any statement or report issued by any analyst irrespective of the content of the statement or report.

7

Executive Officers

Executive Officers of the Company as of February 27, 2008 were as follows:

Name	Office	Age
Sharon M. Brady	Senior Vice President, Human Resources		57
Robert E. Brunner	Executive Vice President		50
Russell M. Flaum	Executive Vice President		57
Philip M. Gresh, Jr.	Executive Vice President		59
Thomas J. Hansen	Vice Chairman		59
Craig A. Hindman	Executive Vice President		53
Ronald D. Kropp	Senior Vice President and Chief Financial Officer		42
Roland M. Martel	Executive Vice President		53
David C. Parry	Executive Vice President		54
E. Scott Santi	Executive Vice President		46
David B. Speer	Chairman and Chief Executive Officer		56
Allan C. Sutherland	Senior Vice President, Taxes and Investments		44
Juan Valls	Executive Vice President		46
Jane L. Warner	Executive Vice President		61
James H. Wooten, Jr.	Senior Vice President, General Counsel and Corporate Secretary		59
Hugh J. Zentmyer	Executive Vice President		61

The executive officers of the Company serve at the pleasure of the Board of Directors. Except for Mses. Brady and Warner and Messrs. Brunner, Hindman, Kropp, Martel, Parry, Santi, Valls and Wooten, each of the foregoing officers has been employed by the Company in various elected executive capacities for more than five years. Ms. Brady was elected Senior Vice President of Human Resources in 2006. Prior to joining the Company in 2006, she was Vice President and Chief Human Resource Officer of Snap-On Inc. Ms. Warner was elected Executive Vice President in 2007. Prior to joining the Company in 2005 as President of worldwide finishing, she was President of Plexus Systems and a Vice President of EDS. Mr. Brunner was elected Executive Vice President in 2006. He joined the Company in 1980 and has held various management positions with the automotive fasteners businesses. Mr. Hindman was elected Executive Vice President in 2004. He joined the Company in 1976 and has held various sales, marketing and general management positions with the construction products businesses. Mr. Kropp was elected Senior Vice President and Chief Financial Officer in 2006. He joined the Company in 1993. He has held various financial management positions and was appointed as Vice President and Controller, Financial Reporting in 2002 and was designated Principal Accounting Officer in 2005. Mr. Martel was elected Executive Vice President in 2006. He joined the Company in 1994 and has held various management positions in the automotive and metal components businesses. Mr. Parry was elected Executive Vice President in 2006. He joined the Company in 1994 and has held various management positions in the performance polymers businesses. Mr. Santi was elected Executive Vice President in 2004. He joined the Company in 1983 and has held various sales, marketing and general management positions with the construction products, machined components and welding businesses. Mr. Valls was elected Executive Vice President in 2007. Prior to his new appointment, he was Vice President and General Manager of ITW Delfast International. He joined the Company in 1989 and has held various management positions in the European automotive businesses. Mr. Wooten was elected Senior Vice President, General Counsel and Corporate Secretary in 2006. He joined the Company in 1988 and has held positions of increasing responsibility in the legal department.

Internet Information

After the Company electronically files materials with, or furnishes it to, the Securities and Exchange Commission, it is available free of charge through the Company’s website (www.itw.com). Copies of the

8

following information are also available free of charge through the Company’s website (www.itw.com) and are available in print to any shareholder who requests it:

•  The Company’s Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K;

•  Statement of Principles of Conduct;

•  Code of Ethics for CEO and key financial and accounting personnel;

•  Charters of the Audit, Corporate Governance and Nominating and Compensation Committees of the Board of Directors;

•  Corporate Governance Guidelines; and

•  Amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934.

ITEM 1A.  Risk Factors

The Company’s business, financial condition, results of operations and cash flows are subject to various risks, including, but not limited to those set forth below, which could cause actual results to vary materially from recent results or from anticipated future results. These risk factors should be considered together with information included elsewhere in this Annual Report on Form 10-K. In addition, the Company is subject to substantially the same risk factors as other U.S.-based global industrial manufacturers, although the Company believes that its decentralized structure and the broad array of end markets that its businesses serve mitigates the possibility that any single risk factor will materially adversely effect the Company’s consolidated financial position.

A downturn or further downturn in the major markets served by the Company may adversely affect results.

While the Company’s businesses serve a broad array of end markets, a sustained downturn or further downturn in the construction, general industrial, automotive or food institutional/restaurant and service markets could have a material adverse effect on the Company’s business, results of operation or financial condition.

Deterioration in international and domestic business and economic conditions may have a material adverse affect on the Company’s results of operations.

The Company currently has approximately 825 business units in 52 countries. In 2007, approximately 49% of the Company’s revenues were generated outside of the United States. As the Company continues to expand its global footprint these sales may represent an ever increasing portion of the Company’s revenues. Deterioration in either international or domestic business and economic conditions could occur as a result of a number of factors including:

•  fluctuation in currency exchange rates;

•  limitations on ownership and on repatriation of earnings;

•  transportation delays and interruptions;

•  political, social and economic instability and disruptions;

•  government embargoes or foreign trade restrictions;

•  the imposition of duties and tariffs and other trade barriers;

•  import and export controls;

•  labor unrest and current and changing regulatory environments;

•  the potential for nationalization of enterprises;

9

•  difficulties in staffing and managing multi-national operations;

•  limitations on its ability to enforce legal rights and remedies; and

•  potentially adverse tax consequences.

If the Company is unable to manage successfully the risks associated with expanding its international business or adequately manage operational fluctuations internationally, the risks could have a material adverse effect on the Company’s business, results of operations or financial condition.

Unfavorable impact on raw materials which could adversely affect results.

The Company’s supply of raw materials for its businesses could be interrupted for a variety of reasons, including availability and pricing. Prices for raw materials necessary for production have fluctuated significantly in the past and significant increases could adversely affect the Company’s results of operations and profit margins. While the Company generally attempts to pass along increased raw material prices to its customers in the form of price increases, there may be a time delay between the increased raw material prices and the Company’s ability to increase the prices of its products, or it may be unable to increase the prices of its products due to pricing pressure or other factors.

The Company’s suppliers of component parts may significantly and quickly increase their prices in response to increases in costs of raw materials that they use to manufacture their component parts. In those circumstances, the Company may not be able to increase its prices commensurately with its increased costs. Consequently, its results of operations and financial condition may be materially adversely affected.

The Company’s future growth is, in part, dependent upon introducing new products and preserving its intellectual property.

The Company’s ability to develop new products based on innovation can affect its competitive position and often requires the investment of significant resources. Difficulties or delays in research, development or production of new products and services or failure to gain market acceptance of new products and technologies may significantly reduce future revenues and materially adversely affect the Company’s competitive position.

Protecting the Company’s intellectual property is critical to its innovation efforts. The Company owns a number of patents, trademarks and licenses related to its products and has exclusive and non-exclusive rights under patents owned by others. The Company’s intellectual property may be challenged or infringed upon by third parties or the Company may be unable to maintain, renew or enter into new license agreements with third party owners of intellectual property on reasonable terms. Unauthorized use of the Company’s intellectual property rights or inability to preserve existing intellectual property rights could materially adversely impact the Company’s competitive position and results of operations.

An unfavorable environment for making acquisitions may adversely affect the Company’s future growth.

The Company completed 52 acquisitions in 2007 resulting in approximately $995 million of acquired annualized revenue. The Company expects to continue its strategy of identifying and acquiring businesses with complementary products and services as well as larger acquisitions that represent potential new platforms. However, there can be no assurance that the Company will be able to continue to find suitable businesses to purchase or that it will be able to acquire such businesses on acceptable terms. If the Company is unsuccessful in its efforts, its ability to continue to grow could be adversely affected.

Unfavorable tax law changes and tax authority rulings may adversely affect results.

The Company is subject to income taxes in the United States and in various foreign jurisdictions. Domestic and international tax liabilities are subject to the allocation of income among various tax jurisdictions. The Company’s effective tax rate could be adversely affected by changes in the mix among earnings in countries with differing statutory tax rates, changes in the valuation allowance of deferred tax assets or tax laws. The amount of income taxes and other taxes paid are subject to ongoing audits by U.S. federal, state and local tax authorities and

10

by non-U.S. authorities. If these audits result in assessments different from amounts recorded, future financial results may include unfavorable tax adjustments.

Potential adverse outcome in legal proceedings may adversely affect results.

The Company’s businesses expose it to potential toxic tort and other types of product liability claims that are inherent in the design, manufacture and sale of its products and the products of third-party vendors that it uses or resells. The Company currently maintains what it believes to be suitable and adequate insurance programs consisting of self-insurance up to a certain limit and excess insurance coverage for claims over the established limit. There can be no assurance, however, that the Company will be able to obtain insurance on acceptable terms or that its insurance programs will provide adequate protection against potential liabilities. Even if it maintains adequate insurance programs, successful claims could have a material adverse effect on the Company’s financial condition, liquidity and results of operations and on the ability to obtain suitable or adequate insurance in the future.

ITEM 1B.  Unresolved Staff Comments

None.

ITEM 2.  Properties

As of December 31, 2007, the Company operated the following plants and office facilities, excluding regional sales offices and warehouse facilities:

	Number
	Of		Floor Space
	Properties		Owned		Leased		Total
			(In millions of square feet)
Industrial Packaging		115		7.6		2.8		10.4
Power Systems & Electronics		75		4.9		1.9		6.8
Transportation		100		4.5		2.4		6.9
Construction Products		82		2.9		1.4		4.3
Food Equipment		41		3.1		0.7		3.8
Decorative Surfaces		13		4.0		0.1		4.1
Polymers & Fluids		65		1.5		1.1		2.6
All Other		186		5.5		3.6		9.1
Corporate		34		2.7		0.3		3.0
Total		711		36.7		14.3		51.0

The principal plants outside of the U.S. are in Australia, Belgium, Brazil, Canada, China, Czech Republic, Denmark, France, Germany, Ireland, Italy, Netherlands, South Korea, Spain, Switzerland and the United Kingdom.

The Company’s properties are primarily of steel, brick or concrete construction and are maintained in good operating condition. Productive capacity, in general, currently exceeds operating levels. Capacity levels are somewhat flexible based on the number of shifts operated and on the number of overtime hours worked. The Company adds productive capacity from time to time as required by increased demand. Additions to capacity can be made within a reasonable period of time due to the nature of the businesses.

ITEM 3.  Legal Proceedings

Not applicable.

ITEM 4.  Submission of Matters to a Vote of Security Holders

Not applicable.

11

PART II

ITEM 5.  Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market information, holders of record, dividend data and the performance graph is incorporated by reference to page 73 of the Company’s 2007 Annual Report to Stockholders.

On August 4, 2006, the Company’s Board of Directors authorized a stock repurchase program, which provides for the buyback of up to 35,000,000 shares of common stock. This stock repurchase program was completed in November 2007.

On August 20, 2007, the Company’s Board of Directors authorized a new stock repurchase program, which provides for the buyback of up to $3.0 billion of the Company’s common stock over an open-ended period of time.

Share repurchase activity under these programs for the fourth quarter was as follows:

					Total Number of Shares		Maximum Number		Maximum Value that
			Average		Purchased as part of		that may yet be		may yet be
	Total Number of		Price Paid		Publicly Announced		Purchased Under		Purchased Under
Period	Shares Purchased		Per Share		Program		2006 Program		2007 Program
October 2007		3,635,524	$	56.60		3,635,524		3,658,098		—
November 2007		3,658,098		55.96		3,658,098		—		—
November 2007		2,344,583		55.96		2,344,583		—	$	2,868,800,000
December 2007		4,761,445		54.00		4,761,445		—		2,611,700,000
Total		14,399,650		55.48		14,399,650

ITEM 6.  Selected Financial Data

In thousands (except per share amounts)	2007		2006		2005		2004		2003
Operating revenues	$	16,170,611	$	13,798,995	$	12,540,360	$	11,336,102	$	9,662,593
Income from continuing operations		1,826,079		1,680,577		1,480,435		1,330,138		1,026,396
Income from continuing operations per common share:
Basic		3.31		2.97		2.59		2.20		1.67
Diluted		3.28		2.95		2.57		2.18		1.66
Total assets at year-end		15,525,862		13,880,439		11,445,643		11,351,934		11,193,321
Long-term debt at year-end		1,888,839		955,610		958,321		921,098		920,360
Cash dividends declared per common share		.98		.75		.61		.52		.47

Certain reclassifications of prior years’ data have been made to conform with current year reporting.

On January 1, 2007, the Company adopted Financial Accounting Standards Board (“FASB”) Staff Position No. FAS 13-2, Accounting for a Change or Projected Change in the Timing of Cash Flows Relating to Income Taxes Generated by a Leveraged Lease Transaction (“FSP 13-2”). FSP 13-2 addresses how a change or projected change in the timing of cash flows relating to income taxes generated by a leveraged lease transaction affects the accounting by a lessor for that lease. Refer to page 59 of the Company’s 2007 Annual Report to Stockholders for discussion of the change in accounting principle.

In September 2006, the FASB issued Statement of Financial Accounting Standards No. 158, Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans — an amendment of FASB Statements No. 87, 88, 106 and 132(R) (“SFAS 158”). On December 31, 2006, the Company adopted the recognition and disclosure provisions of SFAS 158. This statement requires employers to recognize the overfunded or underfunded status of defined benefit pension and postretirement plans as an asset or liability

12

in its statement of financial position and previously unrecognized changes in that funded status through accumulated other comprehensive income. Refer to pages 62 through 65 of the Company’s 2007 Annual Report to Stockholders for discussion of the effect of the change in accounting principle.

Effective January 1, 2005, the Company adopted Statement of Financial Accounting Standards No. 123 (revised 2004), Share-Based Payment (“SFAS 123R”), which requires the Company to measure the cost of employee services received in exchange for equity awards based on the grant date fair value. Upon adoption of SFAS 123R, the Company records compensation expense for the fair value of stock awards over the remaining service periods of those awards.

Information on the comparability of results is included in pages 30 through 47 of the Company’s 2007 Annual Report to Stockholders.

ITEM 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations

This information is incorporated by reference from pages 30 through 47 of the Company’s 2007 Annual Report to Stockholders.

ITEM 7A.  Quantitative and Qualitative Disclosures About Market Risk

This information is incorporated by reference from pages 45 and 46 of the Company’s 2007 Annual Report to Stockholders.

ITEM 8. Financial Statements and Supplementary Data

The Company’s financial statements and report thereon of Deloitte & Touche LLP dated February 27, 2008, as found on pages 49 through 72 and the supplementary data as found on page 73 of the Company’s 2007 Annual Report to Stockholders, are incorporated by reference. The unaudited interim financial statements included as supplementary data reflect all adjustments that are, in the opinion of management, necessary to a fair statement of the results for the interim periods presented.

ITEM 9.  Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

Not applicable.

ITEM 9A.  Controls and Procedures

Controls and Procedures

The Company’s management, with the participation of the Company’s Chairman and Chief Executive Officer and Senior Vice President and Chief Financial Officer, has evaluated the effectiveness of the Company’s disclosure controls and procedures (as defined in Exchange Act Rule 13a-15(e)) as of December 31, 2007. Based on such evaluation, the Company’s Chairman and Chief Executive Officer and Senior Vice President and Chief Financial Officer have concluded that, as of December 31, 2007, the Company’s disclosure controls and procedures were effective.

Management’s Report on Internal Control over Financial Reporting

The Management Report on Internal Control Over Financial Reporting, as found on page 48 of the Company’s 2007 Annual Report to Stockholders, is incorporated by reference.

The Report of Independent Registered Public Accounting Firm, as found on page 49 of the Company’s 2007 Annual Report to Stockholders, is incorporated by reference.

In connection with the evaluation by management, including the Company’s Chairman and Chief Executive Officer and Senior Vice President and Chief Financial Officer, no changes in the Company’s internal control over financial reporting (as defined in Exchange Act Rule 13a-15(f)) during the quarter ended December 31, 2007 were identified that have materially affected or are reasonably likely to materially affect the Company’s internal control over financial reporting.

13

ITEM 9A(T).  Controls and Procedures

Not applicable.

ITEM 9B.  Other Information

Not applicable.

PART III

ITEM 10.  Directors, Executive Officers and Corporate Governance

Information regarding the Directors of the Company is incorporated by reference from the information under the caption “Election of Directors” in the Company’s Proxy Statement for the 2008 Annual Meeting of Stockholders.

Information regarding the Audit Committee and its Financial Experts is incorporated by reference from the information under the captions “Board of Directors and Its Committees” and “Audit Committee Report” in the Company’s Proxy Statement for the 2008 Annual Meeting of Stockholders.

Information regarding the Executive Officers of the Company can be found in Part I of this Annual Report on Form 10-K on page 8.

Information regarding compliance with Section 16(a) of the Exchange Act is incorporated by reference from the information under the caption “Section 16(a) Beneficial Ownership Reporting Compliance” in the Company’s Proxy Statement for the 2008 Annual Meeting of Stockholders.

Information regarding the Company’s code of ethics that applies to the Company’s Chairman and Chief Executive Officer, Senior Vice President and Chief Financial Officer, and key financial and accounting personnel is incorporated by reference from the information under the caption “Corporate Governance Policies and Practices” in the Company’s Proxy Statement for the 2008 Annual Meeting of Stockholders.

ITEM 11.  Executive Compensation

This information is incorporated by reference from the information under the captions “Executive Compensation,” “Director Compensation,” “Compensation Discussion and Analysis” and “Compensation Committee Report” in the Company’s Proxy Statement for the 2008 Annual Meeting of Stockholders.

ITEM 12.  Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

This information is incorporated by reference from the information under the captions “Ownership of ITW Stock” and “Equity Compensation Plan Information” in the Company’s Proxy Statement for the 2008 Annual Meeting of Stockholders.

ITEM 13.  Certain Relationships and Related Transactions, and Director Independence

Information regarding certain relationships and related transactions is incorporated by reference from the information under the captions “Ownership of ITW Stock,” “Certain Relationships and Related Transactions” and “Corporate Governance Policies and Practices” in the Company’s Proxy Statement for the 2008 Annual Meeting of Stockholders.

Information regarding director independence is incorporated by reference from the information under the captions “Corporate Governance Policies and Practices” and “Categorical Standards for Director Independence” in the Company’s Proxy Statement for the 2008 Annual Meetings of Stockholders.

14

ITEM 14.  Principal Accounting Fees and Services

This information is incorporated by reference from the information under the caption “Ratification of the Appointment of Independent Public Accountants” in the Company’s Proxy Statement for the 2008 Annual Meeting of Stockholders.

PART IV

ITEM 15.  Exhibits and Financial Statement Schedules

(a)(1) Financial Statements

The financial statements and report thereon of Deloitte & Touche LLP dated February 27, 2008 as found on pages 49 through 72 and the supplementary data as found on page 73 of the Company’s 2007 Annual Report to Stockholders, are incorporated by reference.

   (2) Financial Statement Schedules

Not applicable.

   (3) Exhibits

(i)  See the Exhibit Index on pages 17 and 18 of this Form 10-K.

(ii) Pursuant to Regulation S-K, Item 601(b)(4)(iii), the Company has not filed with Exhibit 4 any debt instruments for which the total amount of securities authorized thereunder is less than 10% of the total assets of the Company and its subsidiaries on a consolidated basis as of December 31, 2007, with the exception of the agreements related to the 53/4% Notes and the indenture related to the 67/8% Notes which are filed with Exhibit 4. The Company agrees to furnish a copy of the agreements related to the debt instruments which have not been filed with Exhibit 4 to the Securities and Exchange Commission upon request.

15

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized on this 27th day of February 2008.

ILLINOIS TOOL WORKS INC.

By:  /s/  DAVID B. SPEER

David B. Speer

Chairman and Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed by the following persons on behalf of the registrant and in the capacities indicated on this 27th day of February 2008.

Signatures	Title
/s/  DAVID B. SPEER David B. Speer	Chairman and Chief Executive Officer (Principal Executive Officer)
/s/  RONALD D. KROPP Ronald D. Kropp	Senior Vice President and Chief Financial Officer (Principal Accounting and Financial Officer)
WILLIAM F. ALDINGER	Director
MICHAEL J. BIRCK	Director
MARVIN D. BRAILSFORD	Director
SUSAN CROWN	Director
DON H. DAVIS, JR.	Director
ROBERT C. MCCORMACK	Director
ROBERT S. MORRISON	Director
JAMES A. SKINNER	Director
HAROLD B. SMITH	Director
PAMELA B. STROBEL	Director
	By /s/  DAVID B. SPEER (David B. Speer, as Attorney-in-Fact)

Original powers of attorney authorizing David B. Speer to sign the Company’s Annual Report on Form 10-K and amendments thereto on behalf of the above-named directors of the registrant have been filed with the Securities and Exchange Commission as part of this Annual Report on Form 10-K (Exhibit 24).

16

EXHIBIT INDEX

ANNUAL REPORT on FORM 10-K
2007

Exhibit
Number				Description
	3	(a)	—	Restated Certificate of Incorporation of Illinois Tool Works Inc., filed as Exhibit 3(a) to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended March 31, 2006 (Commission File No. 1-4797) and incorporated herein by reference.
	3	(b)	—	By-laws of Illinois Tool Works Inc., as amended, filed as Exhibit 3(b) to the Company’s Current Report on Form 8-K dated February 8, 2008 and incorporated herein by reference.
	4	(a)	—	Indenture, dated as of November 1, 1986, between Illinois Tool Works Inc. and The First National Bank of Chicago, as Trustee, filed as Exhibit 4 to the Company’s Registration Statement on Form S-3 (Registration Statement No. 33-5780) filed with the Securities and Exchange Commission on May 14, 1986 and incorporated herein by reference.
	4	(b)	—	First Supplemental Indenture, dated as of May 1, 1990 between Illinois Tool Works Inc. and Harris Trust and Savings Bank, as Trustee, filed as Exhibit 4-3 to the Company’s Post-Effective Amendment No. 1 to Registration Statement on Form S-3 (Registration Statement No. 33-5780) filed with the Securities and Exchange Commission on May 8, 1990 and incorporated herein by reference.
	4	(c)	—	Form of 53/4% Notes due March 1, 2009, filed as Exhibit 4 to the Company’s Current Report on Form 8-K dated February 24, 1999 and incorporated herein by reference.
	4	(d)	—	Form of Indenture (Revised) in connection with Premark International, Inc.’s Form S-3 Registration Statement No. 33-35137 and Form S-3 Registration Statement No. 333-62105 (Exhibit 4.2 to the Premark International, Inc.’s Annual Report on Form 10-K for the year ended December 28, 1996) and incorporated herein by reference.
	10	(a)*	—	Illinois Tool Works Inc. 1996 Stock Incentive Plan dated February 16, 1996, as amended on December 12, 1997, October 29, 1999, January 3, 2003, March 18, 2003, January 2, 2004, December 10, 2004 and December 7, 2005, filed as Exhibit 10(a) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2005 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(b)*	—	Illinois Tool Works Inc. 1982 Executive Contributory Retirement Income Plan adopted December 13, 1982, filed as Exhibit 10(c) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 1990 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(c)*	—	Illinois Tool Works Inc. 1985 Executive Contributory Retirement Income Plan adopted December 1985, filed as Exhibit 10(d) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 1990 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(d)*	—	Amendment to the Illinois Tool Works Inc. 1985 Executive Contributory Retirement Income Plan dated May 1, 1996, filed as Exhibit 10(c) to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 1996 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(e)*	—	Illinois Tool Works Inc. Executive Incentive Plan adopted February 16, 1996, filed as Exhibit 10(a) to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 1996 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(f)*	—	ITW Nonqualified Pension Benefits Plan, effective January 1, 2002, filed as Exhibit 10(a) to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended September 30, 2002 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(g)*	—	First Amendment to the ITW Nonqualified Pension Benefits Plan, effective February 8, 2008.

17

Exhibit
Number				Description
	10	(h)*	—	Illinois Tool Works Inc. Non-Employee Directors’ Restricted Stock Program, filed as Exhibit 10(a) to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended March 31, 2004 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(i)*	—	Illinois Tool Works Inc. Directors’ Deferred Fee Plan effective May 5, 2006, as amended and approved by the Board of Directors on February 9, 2007, filed as Exhibit 10(h) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2006 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(j)*	—	Amendment to the Illinois Tool Works Inc. Directors’ Deferred Fee Plan, effective February 8, 2008.
	10	(k)*	—	Illinois Tool Works Inc. Phantom Stock Plan for Non-Officer Directors, filed as Exhibit 10(e) to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 1996 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(l)*	—	Illinois Tool Works Inc. Executive Contributory Retirement Income Plan effective January 1, 1999, as amended effective July 1, 2000 and December 10, 2004, filed as Exhibit 10(j) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2004 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(m)	—	Underwriting Agreement dated February 19, 1999, related to the 53/4% Notes due March 1, 2009, filed as Exhibit 1 to the Company’s Current Report on Form 8-K dated February 24, 1999 and incorporated herein by reference.
	10	(n)*	—	Stock option terms effective for December 2004 grants filed as Exhibit 10.4 to the Company’s Current Report on Form 8-K dated December 10, 2004 and incorporated herein by reference.
	10	(o)*	—	ITW Stock Option Plan Terms of the Option Grant effective for February 8, 2008 grants.
	10	(p)*	—	Illinois Tool Works Inc. 2006 Stock Incentive Plan dated February 10, 2006, as amended on May 5, 2006, filed as Exhibit 10(a) to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended March 31, 2006 (Commission File No. 1-4797) and incorporated herein by reference.
	10	(q)*	—	Amendment to the Illinois Tool Works Inc. 2006 Stock Incentive Plan, effective February 8, 2008.
	13		—	The Company’s 2007 Annual Report to Stockholders pages 30 to 73.
	21		—	Subsidiaries and Affiliates of the Company.
	23		—	Consent of Independent Registered Public Accounting Firm.
	24		—	Powers of Attorney.
	31		—	Rule 13a-14(a) Certification.
	32		—	Section 1350 Certification.
	99	(a)	—	Description of the capital stock of Illinois Tool Works Inc., filed as Exhibit 99 to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended March 31, 1997 (Commission File No. 1-4797) and incorporated herein by reference.

* Management contract or compensatory plan or arrangement.

18

EX-10.(G)

Exhibit 10(g)

FIRST AMENDMENT TO THE
ITW NONQUALIFIED PENSION BENEFITS PLAN

     This First Amendment to the ITW Nonqualified Pension Benefits Plan (the “Plan”) is made this 8th day of February, 2008 by the Compensation Committee of the Board of Directors of Illinois Tool Works Inc. (the “Company”).

R E C I T A L S

     The Company is the sponsor of the Plan, as last amended and restated effective as of January 1, 2002, and intends that the Plan continue to provide additional benefits to certain employees whose benefits under the ITW Retirement Accumulation Plan (the “Qualified Plan”) are limited by the Internal Revenue Code and reduced due to their deferrals under the Illinois Tool Works Inc. Executive Contributory Retirement Income Plan. All capitalized terms not defined herein shall have the same meaning as in the Plan.

A M E N D M E N T

     The definition of Actuarial Equivalent in Section 1.1 of the Plan, as previously amended and restated, is hereby amended and superseded in its entirety to provide as follows:

     “Actuarial Equivalent” means an equivalent form of payment of a Participant’s Supplemental Benefit. For Purposes of converting a Supplemental Benefit to a form offered under the Qualified Plan, Actuarial Equivalent will be determined using the Qualified Plan’s definition of Actuarial Equivalent.

EX-10.(J)

Exhibit 10(j)

AMENDMENT TO THE ILLINOIS TOOL WORKS INC.
DIRECTORS’ DEFERRED FEE PLAN

     This Amendment to the Illinois Tool Works Inc. Directors’ Deferred Fee Plan (the “Plan”) is made as of the 8^th day of February, 2008 by the Board of Directors of Illinois Tool Works Inc. (the “Company”).

R E C I T A L S

     The Plan, which was approved by the Board of Directors on February 9, 2007, established effective May 5, 2006, is an amendment and restatement of, and replacement by merger for: (i) the Company’s Outside Directors’ Deferred Fee Plan, as established effective December 12, 1980; and (ii) the deferral provisions of the Company’s Non-Officer Directors’ Fee Conversion Plan, as approved by the Board on February 19, 1999 and amended December 15, 2000. All capitalized terms not defined herein shall have the same meaning as in the Plan.

A M E N D M E N T

     The Definition of “Fair Market Value” in Section 1.13 of the Plan is hereby amended and superseded in its entirety to provide as follows:

Fair Market Value:     The closing market price of Common Stock on the relevant date, as reported in the New York Stock Exchange section (or any successor thereto) of The Wall Street Journal, or, if no sales of Common Stock were reported for that date, on the most recent preceding date on which Common Stock was traded.

EX-10.(O)

Exhibit 10(o)

ITW STOCK OPTION PLAN
TERMS OF THE OPTION GRANT

(a.) In the event of a stock dividend, stock split, reorganization or recapitalization, appropriate adjustment will be made in the number of shares subject to the option and in the option price per share.

(b.) The option period shall be for 10 years from the date of grant on February 8, 2008. Accordingly, no options under this grant may be exercised after the close of business in Chicago on February 7, 2018. No purchase of shares may be made under this option during the first year of the option period. During the second year of the option period, you shall have the right to purchase 25% of the total number of optioned shares, and in each of the next three years an additional 25% of the total number of shares optioned hereunder. Such rights to exercise shall be cumulative and may be exercised in any succeeding year of the option period up to the extent vested but not exercised in a previous year or years. On February 7, 2018, all rights under this agreement as to any shares covered by the option shall terminate.

(c.) You shall have no voting, dividend or subscription rights except with respect to the shares which have been issued to you following your exercise of part or all of the option. Your rights under this option agreement may not be assigned or transferred, and during your lifetime the option shall be exercisable only by you personally.

(d.) If prior to February 7, 2018, you terminate employment with the Company by reason of disability, as defined by the Company’s benefit plans, your option shall be fully vested and exercisable not later than the earlier of five years after the date of termination due to disability, or February 7, 2018. If you die while in the employ of the Company, or (notwithstanding the previous sentence) after terminating by reason of disability, your option shall be fully vested and exercisable by your estate not later than the earliest of: (i.) two years after the date of death, or (ii.) five years after the date of termination due to disability, or (iii.) February 7, 2018.

(e.) If you retire (defined as term of employment with the Company after attaining age 62 and 10 years of service under the Company’s retirement plan) prior to February 7, 2018, your option shall be fully vested and exercisable not later than the earlier of five years from the date of your retirement or February 7, 2018. If you die after terminating employment by reason of retirement, your option shall be exercisable by your estate not later than the earliest of: (i.) two years after the date of death, or (ii.) five years after the date of retirement, or (iii.) February 7, 2018.

(f.) If you terminate your employment for any reason other than death, retirement or disability, your options that were vested prior to termination and not previously exercised may be exercised by you during the 90-day period commencing on the date of your termination but not later than February 7, 2018. If you die during this 90-day period, the exercise period will be extended to the earlier of two years from the date of death or February 7, 2018.

(g.) Notwithstanding the foregoing, the Compensation Committee of the Board of Directors may, in its sole discretion, deem this option to be immediately forfeited if you are terminated for cause (as defined by the Committee), compete with the Company, or conduct yourself in a manner adversely affecting the Company.

(h.) The option is subject to the terms of the Illinois Tool Works Inc. 2006 Stock Incentive Plan. Any inconsistencies shall be resolved in favor of the Plan.

(i.) These options and the Plan should be construed in accordance with and governed by the laws of the State of Illinois, United States of America.

The exercise of this option generally results in ordinary income being recognized for tax purposes in an amount equal to the excess of the market price at the time of exercise over the option price.

EX-10.(Q)

Exhibit 10(q)

AMENDMENT TO THE ILLINOIS TOOL WORKS INC.
2006 STOCK INCENTIVE PLAN

     This Amendment to the Illinois Tool Works Inc. 2006 Stock Incentive Plan (the “Plan”) is made as of the 8^th day of February, 2008 by the Board of Directors of Illinois Tool Works Inc. (the “Company”).

R E C I T A L S

     The Plan, which was approved by the Board of Directors on February 10, 2006, amended by the Board of Directors on May 5, 2006 and approved by the Stockholders on May 5, 2006, is an amendment and restatement of the Illinois Tool Works Inc. 1996 Stock Incentive Plan, as amended. All capitalized terms not defined herein shall have the same meaning as in the Plan.

A M E N D M E N T

     The Definition of “Fair Market Value” in Section 2 of the Plan is hereby amended and superseded in its entirety to provide as follows:

Fair Market Value:     The closing market price of Common Stock on the relevant date, as reported in the New York Stock Exchange section (or any successor thereto) of The Wall Street Journal, or, if no sales of Common Stock were reported for that date, on the most recent preceding date on which Common Stock was traded.

EX-13

Exhibit 13

Management’s Discussion and Analysis

INTRODUCTION

Illinois Tool Works Inc. (the “Company” or “ITW”) is a multinational manufacturer of a diversified range of industrial products and equipment with approximately 825 operations in 52 countries. During 2007, the Company changed its internal management reporting. These 825 businesses are internally reported as 60 operating segments to senior management. The Company’s 60 operating segments have been aggregated into the following eight reportable segments for external purposes: Industrial Packaging; Power Systems & Electronics; Transportation; Construction Products; Food Equipment; Decorative Surfaces; Polymers & Fluids; and All Other.

In 2006 and 2005, the Company’s operations were aggregated and organized into the following four segments: Engineered Products—North America; Engineered Products—International; Specialty Systems—North America; and Specialty Systems—International. The segment information provided for 2006 and 2005 has been restated to conform to the new segment presentation.

Due to the large number of diverse businesses and the Company’s highly decentralized operating style, the Company does not require its business units to provide detailed information on operating results. Instead, the Company’s corporate management collects data on a few key measurements: operating revenues, operating income, operating margins, overhead costs, number of months on hand in inventory, days sales outstanding in accounts receivable, past due receivables and return on invested capital. These key measures are monitored by management and significant changes in operating results versus current trends in end markets and variances from forecasts are discussed with operating unit management.

The results of each segment are analyzed by identifying the effects of changes in the results of the base businesses, newly acquired companies, restructuring costs, goodwill and intangible impairment charges, and currency translation on the operating revenues and operating income of each segment. Base businesses are those businesses that have been included in the Company’s results of operations for more than 12 months. The changes to base business operating income include the estimated effects of both operating leverage and changes in variable margins and overhead costs. Operating leverage is the estimated effect of the base business revenue changes on operating income, assuming variable margins remain the same as the prior period. As manufacturing and administrative overhead costs usually do not significantly change as a result of revenues increasing or decreasing, the percentage change in operating income due to operating leverage is usually more than the percentage change in the base business revenues.

A key element of the Company’s business strategy is its continuous 80/20 business process for both existing businesses and new acquisitions. The basic concept of this 80/20 business process is to focus on what is most important (the 20% of the items which account for 80% of the value) and to spend less time and resources on the less important (the 80% of the items which account for 20% of the value). The Company’s operations use this 80/20 business process to simplify and focus on the key parts of their business, and as a result, reduce complexity that often disguises what is truly important. The Company’s 825 operations utilize the 80/20 process in various aspects of their business. Common applications of the 80/20 business process include:

• Simplifying product lines by reducing the number of products offered by combining the features of similar products, outsourcing products or, as a last resort, eliminating low-value products.

• Segmenting the customer base by focusing on the 80/20 customers separately and finding alternative ways to serve the 20/80 customers.

• Simplifying the supplier base by partnering with 80/20 suppliers and reducing the number of 20/80 suppliers.

• Designing business processes, systems and measurements around the 80/20 activities.

The result of the application of this 80/20 business process is that the Company has consistently improved its operating and financial performance. These 80/20 efforts can result in restructuring projects that reduce costs and improve margins. Corporate management works closely with those business units that have operating results below expectations to help those units better apply this 80/20 business process and improve their results.

30     2007 Annual Report

CONSOLIDATED RESULTS OF OPERATIONS

The Company’s consolidated results of operations for 2007, 2006 and 2005 are summarized as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	16,170,611		$	13,798,995		$	12,540,360
Operating income		2,623,756			2,385,414			2,115,230
Margin %		16.2	%		17.3	%		16.9	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		1.8	%		4.3	%		0.4	%		3.5	%		8.7	%		0.9	%
Changes in variable margins and overhead costs		—			(0.1	)		—			—			1.3			0.2
		1.8			4.2			0.4			3.5			10.0			1.1
Acquisitions and divestitures		11.2			2.1			(1.5	)		6.8			1.8			(0.9	)
Restructuring costs		—			(0.7	)		(0.1	)		—			1.4			0.2
Impairment of goodwill and intangibles		—			0.7			0.1			—			(0.1	)		—
Translation		4.1			3.7			—			(0.3	)		(0.3	)		—
Other		0.1			—			—			—			—			—
		17.2	%		10.0	%		(1.1	)%		10.0	%		12.8	%		0.4	%

Operating Revenues

Revenues increased 17.2% in 2007 over 2006 primarily due to revenues from acquisitions, the favorable effect of currency translation due to the weakening dollar, and an increase in base revenues. During 2007, 52 businesses were acquired worldwide with international businesses representing 71% of the annualized acquired revenue. The base business revenues increased in 2007 versus 2006 primarily related to a 6.3% increase in international base business revenues. European economic growth and market demand were strong during the first half of 2007 with a slight moderation in the second half of 2007. In addition, the Company’s Asia Pacific end markets continued to have strong growth. North American base business revenues decreased 1.2% primarily due to a continued decline in the residential construction market and weak industrial production.

Revenues increased 10.0% in 2006 over 2005 primarily due to revenues from acquisitions and an increase in base revenues. During 2006, 53 businesses were acquired worldwide with international businesses representing 51% of the annualized acquired revenue. The base business revenues increased in 2006 versus 2005 primarily related to a 4.4% increase in international base business revenues. European economic growth and market demand improved starting in the second quarter of 2006 and continued through the remainder of the year. In addition, strong growth in Asia Pacific markets contributed to the base business revenue increase. North American base business revenues increased 2.8% for the full year as first half 2006 growth was partially offset by lower revenues in the last half of 2006 due to declines in the construction and automotive end markets and the slowing of industrial production.

Operating Income

Operating income in 2007 improved over 2006 primarily due to the positive leverage effect from growth in base business revenues and the positive effect of currency translation. Total operating margins declined 1.1% primarily due to the lower margins of acquired companies, including amortization expense. Base margins increased 0.4% primarily as a result of lower overhead costs due to the benefits of restructuring projects.

Operating income in 2006 improved over 2005 primarily due to the positive effect of leverage from the growth in base business revenues, income from acquired companies and lower restructuring expenses. Total operating margins increased 0.4% primarily due to base business operating leverage partially offset by lower margins of acquired businesses.

Illinois Tool Works Inc.     31

INDUSTRIAL PACKAGING

Businesses in this segment produce steel, plastic and paper products used for bundling, shipping and protecting transported goods.

In the Industrial Packaging segment, products include:

• steel and plastic strapping and related tools and equipment;

• plastic stretch film and related equipment;

• paper and plastic products that protect goods in transit; and

• metal jacketing and other insulation products.

In 2007, this segment primarily served the primary metals (25%), general industrial (21%), construction (14%) and food and beverage (13%) markets.

The results of operations for the Industrial Packaging segment for 2007, 2006 and 2005 were as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	2,400,832		$	2,164,822		$	2,097,903
Operating income		301,731			276,789			249,573
Margin %		12.6	%		12.8	%		11.9	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		0.5	%		1.5	%		0.1	%		0.2	%		0.6	%		0.1	%
Changes in variable margins and overhead costs		—			0.4			0.1			—			8.3			1.0
		0.5			1.9			0.2			0.2			8.9			1.1
Acquisitions and divestitures		5.5			0.5			(0.6	)		3.1			1.3			(0.3	)
Restructuring costs		—			0.4			0.1			—			0.2			—
Impairment of goodwill and intangibles		—			2.1			0.3			—			0.5			0.1
Translation		5.0			4.2			(0.1	)		(0.1	)		—			—
Other		(0.1	)		(0.1	)		(0.1	)		—			—			—
		10.9	%		9.0	%		(0.2	)%		3.2	%		10.9	%		0.9	%

Operating Revenues

Revenues increased 10.9% in 2007 over 2006 primarily due to revenues from acquired companies and the favorable effect of currency translation. The increase in acquisition revenue was primarily due to the purchase of four European businesses, a North American and an Australian business. Total base revenues increased modestly as the 5.4% and 14.6% base business revenue increase in the stretch packaging and insulation products businesses, respectively, was partially offset by a 1.3% decrease in the strapping business, primarily due to lower brick, block and lumber shipments to the North American housing market.

Revenues increased 3.2% in 2006 over 2005 primarily due to revenues from acquired companies. Base revenues for the strapping businesses were flat as the second half declines in the North American housing market were offset by equipment and consumable growth in the Asia Pacific metals industry.

Operating Income

Operating income increased in 2007 versus 2006 primarily as a result of the favorable effect of currency translation and decreased goodwill and intangible impairment charges primarily related to a 2006 impairment charge related to a North American stretch packaging equipment business. Total operating margins decreased 0.2% due to lower margins of acquired businesses partially offset by the impairment charge discussed above and lower overhead expenses at base businesses as a result of the benefits of restructuring projects.

Operating income increased in 2006 versus 2005 primarily as a result of increased operating efficiencies and income from acquired companies. Base margins increased 110 basis points due to benefits from restructuring projects, increased operating efficiencies and improved product mix.

32     2007 Annual Report

POWER SYSTEMS & ELECTRONICS

Businesses in this segment produce equipment and consumables associated with specialty power conversion, metallurgy and electronics.

In the Power Systems & Electronics segment, products include:

• arc welding equipment;

• metal arc welding consumables and related accessories;

• metal solder materials for PC board fabrication;

• equipment and services for microelectronics assembly;

• electronic components and component packaging; and

• airport ground support equipment.

In 2007, this segment primarily served the general industrial (36%), electronics (20%) and construction (10%) markets.

The results of operations for the Power Systems & Electronics segment for 2007, 2006 and 2005 were as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	2,245,514		$	1,847,926		$	1,492,554
Operating income		451,660			408,308			310,856
Margin %		20.1	%		22.1	%		20.8	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		5.3	%		8.9	%		0.8	%		16.1	%		28.5	%		2.2	%
Changes in variable margins and overhead costs		—			0.6			0.1			—			3.4			0.6
		5.3			9.5			0.9			16.1			31.9			2.8
Acquisitions and divestitures		14.3			(0.4	)		(2.8	)		8.0			(0.3	)		(1.6	)
Restructuring costs		—			(0.7	)		(0.1	)		—			0.2			—
Impairment of goodwill and intangibles		—			0.6			0.1			—			—			—
Translation		2.0			1.5			(0.1	)		(0.2	)		(0.4	)		—
Other		(0.1	)		0.1			—			(0.1	)		(0.1	)		0.1
		21.5	%		10.6	%		(2.0	)%		23.8	%		31.3	%		1.3	%

Operating Revenues

Revenues increased 21.5% in 2007 over 2006 primarily due to revenues from acquisitions and base business revenue growth. Acquisitions included two worldwide suppliers to the electronic and microelectronic assembly industry in 2006 and a North American producer of welding accessories in 2007. Base revenues grew 6.3% for the welding businesses due to high demand in the energy, heavy fabrication and general industrial markets in both the North American and international markets. Base revenues for the ground support businesses increased 18.0% due to higher worldwide airport demand. Base revenues for the electronics related businesses and PC board fabrication group declined 4.2% and 7.1%, respectively, due to lower worldwide market demand.

Revenues increased 23.8% in 2006 over 2005 primarily due to base business revenue growth and revenues from acquired companies. Acquisitions included two worldwide suppliers of the electronic and microelectronic assembly industry and a supplier for the pipe cutting industry. Base revenues grew 16.9% for the welding businesses due to high demand in the energy, heavy fabrication and general industrial markets. Base business revenues for the ground support and electronic components and packaging businesses increased 12.9% and 11.2%, respectively, due to higher worldwide demand.

Operating Income

Operating income increased in 2007 over 2006 primarily due to the positive leverage effect from the increase in base revenues described above and the favorable effect of currency translation, partially offset by an increase in restructuring expenses and a loss from acquisitions after amortization expense. Total operating margins decreased 2.0% primarily due to the negative acquisition income, partially offset by base margin increases due to revenue growth.

Operating income increased in 2006 over 2005 primarily due to the positive leverage effect from the increase in base revenues described above and lower base business operating expenses. Base margins increased 2.8% due to revenue growth, favorable product mix and recovery of raw material cost increases. Higher base operating margins were partially offset by negative margins from acquisitions after amortization expense.

Illinois Tool Works Inc.     33

TRANSPORTATION

Businesses in this segment produce components, fasteners, fluids and polymers for transportation-related applications.

In the Transportation segment, products include:

• metal and plastic components and assemblies for automobiles and trucks;

• metal and plastic fasteners for automobiles and trucks;

• fluids and polymers for maintenance and appearance;

• fillers and putties for auto body repair; and

• polyester coatings and patch and repair products for the marine industry.

In 2007, this segment primarily served the automotive original equipment manufacturers and tiers (72%) and automotive aftermarket (21%) markets.

The results of operations for the Transportation segment for 2007, 2006 and 2005 were as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	2,215,497		$	1,961,502		$	1,913,281
Operating income		375,853			339,159			325,574
Margin %		17.0	%		17.3	%		17.0	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		2.3	%		5.1	%		0.5	%		(0.6	)%		(1.3	)%		(0.1	)%
Changes in variable margins and overhead costs		—			(3.0	)		(0.5	)		—			5.2			0.9
		2.3			2.1			—			(0.6	)		3.9			0.8
Acquisitions		6.8			3.8			(0.5	)		2.9			0.9			(0.4	)
Restructuring costs		—			0.5			0.1			—			(0.8	)		(0.1	)
Translation		3.9			4.4			0.1			0.2			0.2			—
Other		(0.1	)		—			—			—			—			—
		12.9	%		10.8	%		(0.3	)%		2.5	%		4.2	%		0.3	%

Operating Revenues

Revenues increased 12.9% in 2007 over 2006 due to acquisitions, the favorable effect of currency translation and base business revenue growth. Acquisition revenue was primarily related to an Asian components business, a European fastener business and two automotive aftermarket businesses. Base revenues for the fasteners and components businesses increased 2.7% and 0.1%, respectively, primarily due to a 5.6% increase in automotive production and penetration gains in key Western European markets and increased product penetration at the foreign-owned manufacturers operating in North America. These increases were partially offset by a decline in automotive production at the Detroit 3 automotive manufacturers. Base revenues for the automotive aftermarket businesses in this segment increased 6.6% and the transportation repair businesses increased 3.4%.

Revenues increased 2.5% in 2006 over 2005 primarily due to revenues from acquisitions, partially offset by a slight decline in base revenues. Acquisition revenue was primarily related to the addition of one North American and one European fastener business. Base revenues for the fasteners and components businesses decreased 2.6% and 1.0%, respectively, primarily due to a 6% decline in automotive production at the Detroit 3 automotive manufacturers, partially offset by increased automotive production in Europe and South America as well as product penetration gains. Base revenues for the automotive aftermarket businesses in this segment increased 3.1% and for the transportation repair businesses increased 7.8%.

Operating Income

Operating income increased in 2007 over 2006 primarily due the positive leverage effect from the increase in base revenues described above, the favorable effect of currency translation and income from acquisitions, partially offset by increased operating expenses. Base margins were flat as the leverage from revenue growth was offset by higher raw material costs, price pressure and investments in new programs to support future growth.

Operating income increased in 2006 over 2005 primarily due to lower base business operating expenses and income from acquisitions, partially offset by the negative leverage effect of the decline in base revenues discussed above. In addition, higher restructuring expenses reduced income. Base margins increased 0.8% due to cost control measures and improved international raw material cost recovery, partially offset by lower margins of acquired businesses.

34     2007 Annual Report

CONSTRUCTION PRODUCTS

Businesses in this segment produce tools, fasteners and other products for construction applications.

In the Construction Products segment, products include:

• fasteners and related fastening tools for wood applications;

• anchors, fasteners and related tools for concrete applications;

• metal plate truss components and related equipment and software; and

• packaged hardware, fasteners, anchors and other products for retail.

In 2007, this segment primarily served the residential construction (39%), renovation construction (29%) and commercial construction (28%) markets.

The results of operations for the Construction Products segment for 2007, 2006 and 2005 were as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	2,064,477		$	1,897,690		$	1,726,591
Operating income		285,860			259,616			262,510
Margin %		13.8	%		13.7	%		15.2	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		(1.0	)%		(2.9	)%		(0.3	)%		(0.8	)%		(2.1	)%		(0.2	)%
Changes in variable margins and overhead costs		—			5.4			0.7			—			(3.9	)		(0.6	)
		(1.0	)		2.5			0.4			(0.8	)		(6.0	)		(0.8	)
Acquisitions and divestitures		3.7			1.3			(0.3	)		11.4			4.6			(0.9	)
Restructuring costs		—			(3.5	)		(0.5	)		—			3.7			0.6
Impairment of goodwill and intangibles		—			2.3			0.3			—			(2.4	)		(0.4	)
Translation		6.0			7.6			0.2			(0.8	)		(1.0	)		—
Other		0.1			(0.1	)		—			0.1			—			—
		8.8	%		10.1	%		0.1	%		9.9	%		(1.1	)%		(1.5	)%

Operating Revenues

Revenues increased 8.8% in 2007 over 2006 primarily due to the favorable effect of currency translation and revenues from acquisitions, partially offset by a decline in base business revenues. Acquisition revenue was primarily related to the acquisition of a building components business and a tool and fasteners business. Base revenues for the North American fasteners and worldwide building components businesses decreased 7.1% and 13.8%, respectively, due to the ongoing weakness in the North American residential construction market as indicated by a 25.8% decline in housing starts. Base revenue for Europe and Australasia increased 6.2% and 7.6%, respectively, due to strong market demand and new product introductions.

Revenues increased 9.9% in 2006 over 2005 primarily due to revenues from acquisitions offset by a decline in base business revenues. Acquisition revenue was primarily related to a North American building components business. Base revenues for North American fasteners and worldwide building components businesses decreased 5.3% and 17.0%, respectively, due to a dramatic decline in the North American residential construction market in the second half of 2006. Base revenue for Europe and Australasia increased 4.3% and 5.7%, respectively, due to strong market demand.

Operating Income

Operating income increased in 2007 over 2006 primarily due to the favorable effect of currency translation and lower goodwill and intangible impairment charges, partially offset by increased restructuring expenses and the negative effect of the decline in base revenues described above. Base operating expenses declined primarily due to the implementation of restructuring projects meant to better align businesses to current market conditions, partially offset by higher European sales and marketing expenses.

Operating income and margins decreased in 2006 over 2005 primarily due to the negative leverage effect of the decline in base business revenues described above and increased operating expenses. In 2006, an impairment charge of $4.6 million was recorded primarily related to the goodwill and intangibles of a U.S. building component joist business.

Illinois Tool Works Inc.     35

FOOD EQUIPMENT

Businesses in this segment produce commercial food equipment and related service.

In the Food Equipment segment, products include:

• warewashing equipment;

• cooking equipment, including ovens, ranges and broilers;

• refrigeration equipment, including refrigerators, freezers and prep tables;

• food processing equipment, including slicers, mixers and scales; and

• kitchen exhaust, ventilation and pollution control systems.

In 2007, this segment primarily served the food institutional/restaurant (57%), service (29%) and food retail (9%) markets.

The results of operations for the Food Equipment segment for 2007, 2006 and 2005 were as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	1,930,281		$	1,520,990		$	1,483,676
Operating income		307,437			281,248			235,390
Margin %		15.9	%		18.5	%		15.9	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		7.6	%		18.1	%		1.8	%		2.5	%		6.9	%		0.7	%
Changes in variable margins and overhead costs		—			(12.8	)		(2.2	)		—			6.8			1.1
		7.6			5.3			(0.4	)		2.5			13.7			1.8
Acquisitions		15.2			0.9			(2.1	)		—			—			—
Restructuring costs		—			(0.1	)		—			—			5.8			0.9
Translation		4.1			3.3			—			—			—			—
Other		—			(0.1	)		(0.1	)		—			—			(0.1	)
		26.9	%		9.3	%		(2.6	)%		2.5	%		19.5	%		2.6	%

Operating Revenues

Revenues increased 26.9% in 2007 over 2006 primarily due to revenues from acquired companies, base business revenue growth and the favorable effect of currency translation. The acquired revenues are primarily attributable to the acquisition of a European food equipment business. The North American base revenues grew 6.3% from strong institutional/restaurant and service demand, which was partially offset by weak retail equipment demand. In addition, price increases were implemented to offset stainless steel raw material cost increases. Internationally, base revenues grew 9.9% primarily as a result of strong European institutional/restaurant demand.

Revenues increased 2.5% in 2006 over 2005 due to base business revenue growth as a result of a 3.1% growth in the North American institutional/restaurant sector as well as the service business. Internationally, base business revenues increased 1.4% primarily due to growth in European institutional demand, which was offset by exiting a European cold room refrigeration product line.

Operating Income

Operating income increased in 2007 versus 2006 primarily as a result of the positive effect of leverage from the revenue increase described above and the favorable effect of currency translation. Operating margins decreased 2.6% due to lower margins of acquired businesses and lower base margins as a result of substantial raw material price increases, only partially offset by price increases, and an unfavorable product mix. In addition, overhead expenses increased due to investment in service capacity and new product development.

Operating income increased in 2006 versus 2005 primarily as a result of leverage from the revenue increase described above and reduced operating costs. Income was positively affected by a nonrecurring 2005 charge of $8.7 million to resolve accounting issues at a European food equipment business. In addition, income and operating margins were favorably affected by lower operating expenses stemming from 2005 restructuring projects in Europe and North America.

36     2007 Annual Report

DECORATIVE SURFACES

Businesses in this segment produce decorative surfacing materials for countertops, flooring, furniture and other applications.

In the Decorative Surfaces segment, products include:

• decorative high-pressure laminate for countertops;

• solid surface materials for countertops;

• high-pressure laminate flooring;

• laminate for furniture applications; and

• high-pressure laminate worktops.

In 2007, this segment served the commercial construction (52%), renovation construction (21%), residential construction (18%) and general industrial (9%) markets.

The results of operations for the Decorative Surfaces segment for 2007, 2006 and 2005 were as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	1,239,190		$	1,004,003		$	939,757
Operating income		155,670			157,152			153,485
Margin %		12.6	%		15.7	%		16.3	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		0.5	%		1.3	%		0.1	%		4.0	%		10.7	%		1.1	%
Changes in variable margins and overhead costs		—			(6.8	)		(1.1	)		—			(7.3	)		(1.2	)
		0.5			(5.5	)		(1.0	)		4.0			3.4			(0.1	)
Acquisitions		19.5			3.1			(2.0	)		2.7			(0.8	)		(0.5	)
Restructuring costs		—			(0.3	)		(0.1	)		—			(0.6	)		(0.1	)
Translation		3.5			1.8			(0.1	)		0.2			0.4			—
Other		(0.1	)		—			0.1			(0.1	)		—			0.1
		23.4	%		(0.9	)%		(3.1	)%		6.8	%		2.4	%		(0.6	)%

Operating Revenues

Revenues increased 23.4% in 2007 over 2006 primarily due to revenues from acquired companies and the favorable effect of currency translation. The increase in acquisition revenue is due to the purchase of a European laminate business and a European worktop business. North American laminate base revenue was flat as the impact of the slow down in North American residential and renovation construction was offset by continued product mix shift to value added premium laminate. In addition, flooring base revenues declined 20.6% due to its reliance on the North American residential construction industry. International base revenues grew 7.3%, primarily on the strength of the European construction market, especially in Germany.

Revenues increased 6.8% in 2006 over 2005 primarily due to base revenue growth and acquisition revenues. North American laminate base revenues grew 5.1% primarily from value-added premium products. North American flooring base revenues declined 14.7% primarily due to a second half slowdown in end market demand. International base revenues grew 8.2% primarily due to the strength of the European end market demand. The increase in acquisition revenue is due to the purchase of a European worktop business.

Operating Income

Operating income decreased in 2007 versus 2006 primarily due to an increase in operating expenses and increased restructuring expenses. Operating margins decreased primarily due to lower margins from acquired businesses and increased advertising and promotion expenses related to a new laminate product launch and expenses related to product display resets at North American home centers.

Operating income increased in 2006 versus 2005 primarily as a result of leverage from the revenue increase described above, partially offset by an increase in overhead expenses resulting from increased advertising and promotions and increased energy costs. Operating margins declined 0.6% primarily due to lower margins of acquired businesses.

Illinois Tool Works Inc.     37

POLYMERS & FLUIDS

Businesses in this segment produce adhesives, sealants, lubrication and cutting fluids, and janitorial and sanitation supplies.

In the Polymers & Fluids segment, products include:

• adhesives for industrial, construction and consumer purposes;

• chemical fluids which clean or add lubrication to machines;

• epoxy and resin-based coating products for industrial applications;

• hand wipes and cleaners for industrial applications; and

• die-cut components for telecommunications, medical and transportation applications.

In 2007, this segment primarily served the general industrial (32%), construction (14%), maintenance, repair and operations (12%) and automotive aftermarket (8%) markets.

The results of operations for the Polymers & Fluids segment for 2007, 2006 and 2005 were as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	1,001,952		$	762,230		$	677,038
Operating income		172,065			133,420			115,303
Margin %		17.2	%		17.5	%		17.0	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		4.7	%		11.4	%		1.1	%		5.8	%		14.6	%		1.4	%
Changes in variable margins and overhead costs		—			1.6			0.3			—			(3.2	)		(0.5	)
		4.7			13.0			1.4			5.8			11.4			0.9
Acquisitions and divestitures		20.9			11.1			(1.6	)		7.3			4.7			(0.4	)
Restructuring costs		—			(0.2	)		—			—			0.3			0.1
Impairment of goodwill and intangibles		—			(0.8	)		(0.1	)		—			—			—
Translation		5.9			5.9			—			(0.5	)		(0.8	)		—
Other		—			—			—			—			0.1			(0.1	)
		31.5	%		29.0	%		(0.3	)%		12.6	%		15.7	%		0.5	%

Operating Revenues

Revenues increased 31.5% in 2007 over 2006 primarily due to revenues from acquisitions, the favorable effect of currency translation and base business revenue growth. Acquisition revenue was primarily the result of acquiring three fluid products businesses and four polymers businesses. Base revenue increases for fluids and polymers were 7.1% and 2.6%, respectively, primarily due to growth in European demand partially offset by a decrease in revenues for those businesses that serve the North American residential construction market.

Revenues increased 12.6% in 2006 over 2005 primarily due to revenue of acquired companies and base business revenue growth. Acquisition revenue was primarily the result of the acquisition of a North American construction adhesives business and a fluids business. Base revenue increases for fluids and polymers were 6.0% and 5.4%, respectively, primarily due to growth in European demand and price increases, partially offset by a decrease in revenues for businesses that serve the North American residential construction market.

Operating Income

Operating income increased in 2007 over 2006 primarily due to positive leverage effect from the increase in revenues described above, acquisition income and the favorable effect of currency translation. Total operating margins decreased 0.3% due to lower margins of acquired businesses, partially offset by continued base business margin improvements at previously acquired businesses.

Operating income and margins increased in 2006 over 2005 primarily due to positive leverage effect from the increase in revenues described above, partially offset by an increase in raw material costs which diluted variable margins and lower margins of acquired businesses.

38     2007 Annual Report

ALL OTHER

This segment includes all other operating segments.

In the All Other segment, products include:

• plastic reclosable packaging for consumer food storage;

• plastic reclosable bags for storage of clothes and home goods;

• plastic consumables that multi-pack cans and bottles and related equipment;

• plastic fasteners and components for appliances, furniture and industrial uses;

• metal fasteners and components for appliances and industrial applications;

• equipment and related software for testing of materials and structures;

• software and related services for industrial and health care applications;

• swabs, wipes and mats for clean room usage;

• foil and film and related equipment used to decorate consumer products;

• product coding and marking equipment and related consumables;

• paint spray equipment; and

• static and contamination control equipment.

In 2007, this segment primarily served the general industrial (22%), consumer durables (21%) and food and beverage (17%) markets.

The results of operations for the All Other segment for 2007, 2006 and 2005 were as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating revenues	$	3,119,523		$	2,699,147		$	2,258,694
Operating income		573,480			529,722			462,539
Margin %		18.4	%		19.6	%		20.5	%

In 2007 and 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

	2007 COMPARED TO 2006									2006 COMPARED TO 2005
							% POINT INCREASE									% POINT INCREASE
	% INCREASE (DECREASE)						(DECREASE)			% INCREASE (DECREASE)						(DECREASE)
	OPERATING			OPERATING			OPERATING			OPERATING			OPERATING			OPERATING
	REVENUES			INCOME			MARGINS			REVENUES			INCOME			MARGINS
Base business:
Revenue change/Operating leverage		(1.6	)%		(3.6	)%		(0.4	)%		4.6	%		10.6	%		1.2	%
Changes in variable margins and overhead costs		—			7.4			1.5			—			(1.5	)		(0.3	)
		(1.6	)		3.8			1.1			4.6			9.1			0.9
Acquisitions and divestitures		14.0			2.3			(2.2	)		15.5			3.8			(2.2	)
Restructuring costs		—			(1.2	)		(0.2	)		—			1.7			0.3
Impairment of goodwill and intangibles		—			0.5			0.1			—			0.4			0.1
Translation		3.1			2.9			—			(0.6	)		(0.5	)		—
Other		0.1			—			—			—			—			—
		15.6	%		8.3	%		(1.2	)%		19.5	%		14.5	%		(0.9	)%

Operating Revenues

Revenues increased 15.6% in 2007 versus 2006 primarily due to revenues from acquired companies and the favorable effect of currency translation. The increase in acquisition revenue was primarily due to the purchase of two worldwide foils and transfer ribbon businesses, a worldwide graphics business, two test and measurement businesses and two software businesses. Base revenues for the decorating products and equipment businesses and the industrial plastic and metal businesses declined 6.5% and 1.9%, respectively, primarily due to decreased North American end market demand. These decreases were offset by increases in base revenue for the finishing and the test and measurement businesses of 6.7% and 3.6%, respectively, due to continued growth of international capital equipment purchases.

Revenues increased 19.5% in 2006 versus 2005 primarily due to revenues from acquisitions and growth in base business revenues. The increase in acquisition revenue was primarily due to the purchase of two test and measurement businesses, two machined components businesses, and two worldwide foils and transfer ribbon equipment businesses. Base revenues for consumer packaging businesses grew 9.7% led by increased volume for compression and zipper storage bags. Base revenues for the finishing and the industrial plastics and metals businesses grew 6.8% and 2.9%, respectively, due to increased market demand.

Illinois Tool Works Inc.     39

Operating Income

Operating income increased in 2007 versus 2006 primarily due to improved operating efficiencies, the favorable effect of currency translation and income from acquired companies. Operating margins declined 1.2% due to lower margins from acquired businesses, partially offset by base margin increases. Base margin increases were due to lower overhead costs from benefits of restructuring projects and favorable product mix.

Operating income increased in 2006 versus 2005 primarily due to the favorable leverage effect of the increase in base revenues described above, income from acquired companies and lower restructuring expenses. Total operating margins decreased 0.9% due to lower margins from acquired businesses, partially offset by base margin increases. The base margin increase was due to leverage of revenue growth offset by unfavorable product mix and operating costs.

AMORTIZATION AND IMPAIRMENT OF GOODWILL AND INTANGIBLE ASSETS

The Company does not amortize goodwill and intangible assets that have indefinite lives. In the first quarter of each year, the Company performs an annual impairment assessment of goodwill and intangible assets with indefinite lives based on the fair value of the related reporting unit or intangible asset.

As of January 1, 2007, the Company had assigned its recorded goodwill and intangible assets to approximately 440 of its then 750 reporting units. When performing its annual impairment assessment, the Company compares the fair value of each reporting unit to its carrying value. Fair values are determined by discounting estimated future cash flows at the Company’s estimated cost of capital of 10%. Estimated future cash flows are based either on current operating cash flows or on a detailed cash flow forecast prepared by the relevant operating unit. If the fair value of an operating unit is less than its carrying value, an impairment loss is recorded for the difference between the implied fair value of the unit’s goodwill and the carrying value of the goodwill.

Amortization and impairment of goodwill and other intangible assets for the years ended December 31, 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007		2006		2005
Goodwill:
Impairment	$	988	$	14,793	$	9,650
Intangible Assets:
Amortization		158,888		106,766		69,143
Impairment		1,166		2,985		5,049
	$	161,042	$	124,544	$	83,842

Amortization expense increased by $52.1 million in 2007 versus 2006 and by $37.6 million in 2006 over 2005 due primarily to the amortization of newly acquired intangibles.

Total goodwill and intangible asset impairment charges by segment for the years ended December 31, 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007		2006		2005
Industrial Packaging	$	—	$	3,610	$	7,199
Power Systems & Electronics		—		2,492		2,371
Transportation		258		2		—
Construction Products		394		6,312		80
Food Equipment		—		2,263		—
Polymers & Fluids		884		—		—
All Other		618		3,099		5,049
	$	2,154	$	17,778	$	14,699

See the Goodwill and Intangible Assets note for further details of the impairment charges.

INTEREST EXPENSE

Interest expense increased to $102.1 million in 2007 versus $85.4 million in 2006 primarily as a result of interest expense on the 5.25% Euro notes issued in October 2007 and higher average borrowings of short-term commercial paper during 2007. Interest expense decreased to $85.4 million in 2006 versus $94.0 million in 2005 primarily as a result of lower borrowings at international operations and lower average borrowings of short-term commercial paper.

40     2007 Annual Report

OTHER INCOME

Other income for the periods ended December 31, 2007, 2006 and 2005 was as follows:

IN THOUSANDS	2007			2006			2005
Interest income	$	20,164		$	30,483		$	26,880
Loss on foreign currency transactions		(13,128	)		(9,344	)		(2,807	)
Investment income:
Venture capital limited partnership		25,254			23,001			11,629
Leases of equipment		10,603			4,898			15,468
Mortgage investments		—			40,146			84,193
Other investment income		12,023			10,563			14,988
Other		4,399			(8,770	)		(15,346	)
	$	59,315		$	90,977		$	135,005

Mortgage Investments

In 1995, 1996 and 1997, the Company, through its investments in separate mortgage entities, acquired three distinct pools of mortgage-related assets in exchange for aggregate nonrecourse notes payable of $739.7 million, preferred stock of subsidiaries of $60.0 million and cash of $240.0 million. The mortgage-related assets acquired in these transactions related to office buildings, apartment buildings and shopping malls located throughout the United States. In conjunction with these transactions, the mortgage entities simultaneously entered into 10-year swap agreements and other related agreements whereby a third party received a portion of the interest and net operating cash flow from the mortgage-related assets in excess of specified semi-annual amounts and a portion of the proceeds from the disposition of the mortgage-related assets and principal repayments, in exchange for the third party making the contractual principal and interest payments on the nonrecourse notes payable.

In December 2005, in accordance with the 10-year term of the transaction, all remaining mortgage-related assets pertaining to the 1995 mortgage investment transaction (the “First Mortgage Transaction”) were sold and the swap and other related agreements were terminated. The Company received $150.8 million for its share of the disposition proceeds and paid $32.0 million for the redemption of preferred stock of a subsidiary and related accrued dividends. As of December 31, 2005, there were no remaining assets or liabilities related to the First Mortgage Transaction.

In November 2006, in accordance with the 10-year term of the transaction, all remaining mortgage-related assets pertaining to the 1996 mortgage investment transaction (the “Second Mortgage Transaction”) were sold and the swap and other related agreements were terminated. In December 2006, the Company received $157.1 million for its share of the disposition proceeds related to the Second Mortgage Transaction, and in January 2007, the Company paid $34.6 million for the redemption of preferred stock of a subsidiary and related accrued dividends.

In December 2006, the mortgage-related assets pertaining to the 1997 mortgage investment transaction (the “Third Mortgage Transaction”) were sold and the swap and other related agreements were terminated. In December 2006, the Company received $168.6 million for its share of the disposition proceeds related to the Third Mortgage Transaction, and in January 2007, the Company paid $34.6 million for the redemption of preferred stock of a subsidiary and related accrued dividends. After the January 2, 2007 preferred stock payments, there are no remaining assets or liabilities related to the Second or Third Mortgage Transactions.

In 2007, there was no income related to the mortgage investments as a result of the liquidation of the mortgage investments.

In 2006, mortgage investment income declined to $40.1 million as compared with $84.2 million in 2005. Of this decline, $34.4 million resulted from the 2005 completion of the First Mortgage Transaction. The remaining decline of $9.6 million was primarily due to lower gains in 2006 versus 2005 related to the liquidations of the Second and Third Mortgage Transactions.

INCOME TAXES

The effective tax rate was 29.25% in 2007, 29.71% in 2006 and 31.34% in 2005. The effective tax rate differs from the U.S. federal statutory rate primarily due to state taxes, lower foreign tax rates, non-taxable foreign interest income, taxes on foreign dividends and tax relief provided to U.S. manufacturers under the American Jobs Creation Act of 2004. See the Income Taxes note for a reconciliation of the U.S. federal statutory rate to the effective tax rate.

INCOME FROM CONTINUING OPERATIONS

Income from continuing operations in 2007 of $1.8 billion ($3.28 per diluted share) was 8.7% higher than 2006 income of $1.7 billion ($2.95 per diluted share). Income from continuing operations in 2006 was 13.5% higher than 2005 income of $1.5 billion ($2.57 per diluted share).

Illinois Tool Works Inc.     41

FOREIGN CURRENCY

The weakening of the U.S. dollar against foreign currencies increased operating revenues by approximately $546 million and increased income from continuing operations by approximately 11 cents per diluted share in 2007. Foreign currency fluctuations had no significant impact on revenues or earnings in 2006.

DISCONTINUED OPERATIONS

In 2007 and 2006, the Company completed the divestitures of certain construction, consumer packaging and automotive machinery businesses. In addition, a consumer packaging and an automotive components business have been classified as held for sale as of December 31, 2007. Due to the aggregate significance of these five businesses, the consolidated statements of income have been restated to present the operating results of all five businesses, along with the gains realized, net of tax, as discontinued operations for 2007, 2006 and 2005. Assets of $143.5 million and liabilities of $5.8 million related to the two businesses held for sale as of December 31, 2007 have been reclassified to prepaids and other current assets and accrued expenses, respectively.

Results of the discontinued operations for the years ended December 31, 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007		2006			2005
Operating revenues	$	108,253	$	256,054		$	249,934
Income before taxes	$	5,721	$	35,144		$	25,328
Gain on sale of discontinued operations		33,168		19,120			—
Income tax benefit (expense)		4,894		(17,095	)		(10,894	)
Income from discontinued operations	$	43,783	$	37,169		$	14,434

NEW ACCOUNTING PRONOUNCEMENTS

On January 1, 2007, the Company adopted Financial Accounting Standards Board (“FASB”) Interpretation No. 48, Accounting for Uncertainty in Income Taxes—an interpretation of FASB Statement No. 109 (“FIN 48”). FIN 48 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of tax positions taken or expected to be taken in tax returns, and provides guidance on derecognition, classification, and interest and penalties, related to uncertain tax positions. As a result of implementation of FIN 48, the Company did not recognize any change in its liability for unrecognized tax benefits.

On January 1, 2007, the Company adopted FASB Staff Position No. FAS 13-2, Accounting for a Change or Projected Change in the Timing of Cash Flows Relating to Income Taxes Generated by a Leveraged Lease Transaction (“FSP 13-2”). FSP 13-2 addresses how a change or projected change in the timing of cash flows relating to income taxes generated by a leveraged lease transaction affects the accounting by a lessor for that lease. Upon adoption of FSP 13-2, the Company recorded an after-tax charge to retained earnings of $22.6 million, resulting from a change in the timing of expected cash flows related to income tax benefits of the Company’s leveraged lease transactions.

In September 2006, the FASB issued Statement of Financial Accounting Standards No. 157, Fair Value Measurements (“SFAS 157”). SFAS 157 defines fair value and provides guidance for measuring fair value and the necessary disclosures. This standard does not require any new fair value measurements, but rather applies to all other accounting pronouncements that require or permit fair value measurements. In February 2008, the FASB issued a FASB staff position (“FSP”) on SFAS 157 that permits a one year delay of the effective date for all nonfinancial assets and nonfinancial liabilities, except those that are recognized or disclosed at fair value on a recurring basis. The Company will adopt SFAS 157 on January 1, 2008, with the exception of the FSP exclusions described above, and does not anticipate SFAS 157 will materially affect the Company’s financial position or results of operations.

In February 2007, the FASB issued Statement of Financial Accounting Standards No. 159, the Fair Value Option for Financial Assets and Financial Liabilities (“SFAS 159”). SFAS 159 permits companies to choose to measure certain financial instruments and other items at fair value. The standard requires that unrealized gains and losses are reported in earnings for items measured using the fair value option. The Company will adopt SFAS 159 on January 1, 2008 and does not anticipate SFAS 159 will materially affect the Company’s financial position or results of operations.

In December 2007, the FASB issued Statement of Financial Accounting Standards No. 141 (revised 2007), Business Combinations (“SFAS 141R”). SFAS 141R requires an entity to recognize assets acquired, liabilities assumed, contractual contingencies and contingent consideration at their fair value on the acquisition date. SFAS 141R also requires that (1) acquisition-related costs be expensed as incurred; (2) restructuring costs generally be recognized as a post-acquisition expense; and (3) changes in deferred tax asset valuation allowances and income tax uncertainties after the measurement period impact income tax expense. The Company will adopt SFAS 141R on January 1, 2009 and is currently evaluating this statement to determine its effect, if any, on the Company’s results of operations and financial position.

42     2007 Annual Report

LIQUIDITY AND CAPITAL RESOURCES

Cash Flow

The Company’s primary source of liquidity is free operating cash flow. Management continues to believe that such internally generated cash flow will be adequate to service debt and to continue to pay dividends that meet its dividend payout guideline of 25% to 35% of the last two years’ average income from continuing operations. In addition, free operating cash flow is expected to be adequate to finance internal growth, acquisitions and share repurchases.

Free operating cash flow is used to measure normal cash flow generated by its operations that is available for dividends, acquisitions, share repurchases and debt repayment. Free operating cash flow is a measurement that is not the same as net cash flow from operating activities per the statement of cash flows and may not be consistent with similarly titled measures used by other companies.

Summarized cash flow information for the three years ended December 31, 2007, 2006 and 2005 was as follows:

IN THOUSANDS	2007			2006			2005
Net cash provided by operating activities	$	2,484,297		$	2,066,028		$	1,851,543
Additions to plant and equipment		(353,355	)		(301,006	)		(293,102	)
Free operating cash flow	$	2,130,942		$	1,765,022		$	1,558,441
Acquisitions	$	(812,757	)	$	(1,378,708	)	$	(626,922	)
Purchases of investments		(28,734	)		(25,347	)		(120,240	)
Proceeds from investments		91,184			367,365			220,082
Cash dividends paid		(502,430	)		(398,846	)		(335,092	)
Repurchases of common stock		(1,757,761	)		(446,876	)		(1,041,798	)
Net proceeds of debt		777,386			178,441			93,126
Other		339,487			158,739			(44,570	)
Net increase (decrease) in cash and equivalents	$	237,317		$	219,790		$	(296,973	)

On August 20, 2007, the Company’s Board of Directors authorized a new stock repurchase program, which provides for the buyback of up to $3.0 billion of the Company’s common stock over an open-ended period of time. Through December 31, 2007, the Company repurchased 7.1 million shares of its common stock under this program at an average price of $54.65 per share. There are approximately $2.6 billion of authorized repurchases remaining under this program.

On August 4, 2006, the Company’s Board of Directors authorized a stock repurchase program which provided for the buyback of up to 35.0 million shares. This stock repurchase program was completed in November 2007.

Return on Average Invested Capital

The Company uses return on average invested capital (“ROIC”) to measure the effectiveness of its operations’ use of invested capital to generate profits. ROIC for the three years ended December 31, 2007, 2006 and 2005 was as follows:

DOLLARS IN THOUSANDS	2007			2006			2005
Operating income after taxes of 29.25%, 29.71%, and 31.34%, respectively	$	1,856,307		$	1,676,708		$	1,452,317
Invested Capital:
Trade receivables	$	2,915,546		$	2,471,273		$	2,098,276
Inventories		1,625,820			1,482,508			1,203,063
Net plant and equipment		2,194,010			2,053,457			1,807,109
Investments		507,567			595,083			896,487
Goodwill and intangible assets		5,683,341			5,138,687			3,678,938
Accounts payable and accrued expenses		(2,195,965	)		(1,895,182	)		(1,574,018	)
Other, net		92,833			(194	)		277,843
Total invested capital	$	10,823,152		$	9,845,632		$	8,387,698
Average invested capital	$	10,326,990		$	9,160,712		$	8,277,715
Return on average invested capital		18.0	%		18.3	%		17.5	%

Illinois Tool Works Inc.     43

The 30 basis point decrease in ROIC in 2007 versus 2006 was the result of average invested capital increasing 12.7% while after-tax operating income only increased 10.7%, primarily due to lower returns from acquired companies.

As a result of strong base business growth and a lower effective tax rate, ROIC increased 80 basis points in 2006 versus 2005, as after-tax operating income increased 15.5% while average invested capital only increased 10.7%.

Working Capital

Net working capital at December 31, 2007 and 2006 is summarized as follows:

					INCREASE
DOLLARS IN THOUSANDS	2007		2006		(DECREASE)
Current Assets:
Cash and equivalents	$	827,524	$	590,207	$	237,317
Trade receivables		2,915,546		2,471,273		444,273
Inventories		1,625,820		1,482,508		143,312
Other		796,765		662,417		134,348
		6,165,655		5,206,405		959,250
Current Liabilities:
Short-term debt		410,512		462,721		(52,209	)
Accounts payable and accrued expenses		2,195,965		1,895,182		300,783
Other		353,808		278,681		75,127
		2,960,285		2,636,584		323,701
Net Working Capital	$	3,205,370	$	2,569,821	$	635,549
Current Ratio		2.08		1.97

Other current assets increased primarily due to the reclassification of assets of businesses held for sale. Trade receivables, accounts payable and accrued expenses, and inventories increased primarily as a result of currency translation and acquisitions.

Debt

Total debt at December 31, 2007 and 2006 was as follows:

							INCREASE
DOLLARS IN THOUSANDS	2007			2006			(DECREASE)
Short-term debt	$	410,512		$	462,721		$	(52,209	)
Long-term debt		1,888,839			955,610			933,229
Total debt	$	2,299,351		$	1,418,331		$	881,020
Total debt to total capitalization		19.7	%		13.6	%

On October 1, 2007, the Company, through its wholly-owned subsidiary ITW Finance Europe S.A., issued €750.0 million of 5.25% Euro notes due October 1, 2014. The net proceeds of the offering were used to refinance commercial paper outstanding and for general corporate purposes.

In 2007, the Company entered into a $1.0 billion Line of Credit Agreement with a termination date of June 13, 2008 and a $500.0 million revolving credit facility with a termination date of June 15, 2012. This debt capacity is for use principally to support any issuances of commercial paper and to fund larger acquisitions.

The Company has cash on hand and additional debt capacity to fund larger acquisitions. As of December 31, 2007, the Company has unused capacity of approximately $1.5 billion under its current U.S. debt facilities and approximately $425.5 million under international debt facilities. In addition, the Company believes that based on its current free operating cash flow and debt-to-capitalization ratios, it could readily obtain additional financing if necessary.

44     2007 Annual Report

Stockholders’ Equity

The changes to stockholders’ equity during 2007 and 2006 were as follows:

IN THOUSANDS	2007			2006
Beginning balance	$	9,017,508		$	7,546,895
Net income		1,869,862			1,717,746
Cash dividends declared		(533,519	)		(423,563	)
Repurchases of common stock		(1,757,761	)		(446,876	)
Stock option and restricted stock activity		173,647			135,781
Pension and other postretirement benefit adjustments, net of tax		180,110			(171,070	)
Currency translation adjustments		424,037			495,697
Cumulative effect of adopting new accounting standard, net of tax		(22,559	)		—
Shares issued for acquisitions		—			162,898
Ending balance	$	9,351,325		$	9,017,508

CONTRACTUAL OBLIGATIONS AND OFF-BALANCE SHEET ARRANGEMENTS

The Company’s contractual obligations as of December 31, 2007 were as follows:

											2013 AND
IN THOUSANDS	2008		2009		2010		2011		2012		FUTURE YEARS
Total debt	$	410,512	$	506,981	$	6,712	$	255,836	$	5,191		$1,114,119
Interest payments on notes and preferred debt securities		114,937		89,983		75,331		75,052		58,416		107,657
Minimum lease payments		135,172		102,553		74,773		47,278		36,213		69,448
Affordable housing capital obligations		14,040		13,978		13,261		3,244		—		—
Maximum venture capital contributions		5,663		—		—		—		—		—
	$	680,324	$	713,495	$	170,077	$	381,410	$	99,820		$1,291,224

The Company has recorded current income taxes payable of $205.4 million and non-current tax liabilities of $182.6 million. The Company is not able to reasonably estimate the timing of payments related to the non-current obligations.

The Company has provided guarantees related to the debt of certain unconsolidated affiliates of $25.0 million at December 31, 2007. In the event one of these affiliates defaults on its debt, the Company would be liable for the debt repayment. The Company has recorded liabilities related to these guarantees of $17.0 million at December 31, 2007. At December 31, 2007, the Company had open stand-by letters of credit of $152.0 million, substantially all of which expire in 2008. The Company had no other significant off-balance sheet commitments at December 31, 2007.

MARKET RISK

Interest Rate Risk

The Company’s exposure to market risk for changes in interest rates relates primarily to the Company’s long-term debt.

The Company has no cash flow exposure on its long-term obligations related to changes in market interest rates, other than $100.0 million of debt which has been hedged by the interest rate swap discussed below. The Company primarily enters into long-term debt obligations for general corporate purposes, including the funding of capital expenditures and acquisitions. In December 2002, the Company entered into an interest rate swap with a notional value of $100.0 million to hedge a portion of the fixed rate debt. Under the terms of the interest rate swap, the Company receives interest at a fixed rate of 5.75% and pays interest at a variable rate of LIBOR plus 1.96%. The maturity date of the interest rate swap is March 1, 2009. The carrying value of the notes has been adjusted to reflect the fair value of the interest rate swap.

Illinois Tool Works Inc.     45

The following table presents the Company’s financial instruments for which fair value is subject to changing market interest rates:

					6.55%
	5.25%		5.75%		PREFERRED DEBT		6.875%		4.88%
	EURO NOTES DUE		NOTES DUE		SECURITIES DUE		NOTES DUE		NOTES DUE
IN THOUSANDS	OCT 1, 2014		MARCH 1, 2009		DEC 31, 2011		NOV 15, 2008		DEC 31, 2020
As of December 31, 2007:
Estimated cash outflow by year of principal maturity
2008	$	—	$	—	$	—	$	150,000	$	5,472
2009		—		500,000		—		—		5,679
2010		—		—		—		—		5,713
2011		—		—		250,000		—		5,351
2012		—		—		—		—		4,882
2013 and thereafter		1,097,250		—		—		—		11,722
Estimated fair value		1,119,305		509,350		262,140		153,120		39,261
Carrying value		1,095,895		499,604		249,815		149,984		38,819
As of December 31, 2006:
Total estimated cash outflow	$	—	$	500,000	$	250,000	$	150,000	$	49,448
Estimated fair value		—		505,200		262,118		154,050		48,815
Carrying value		—		497,048		249,776		149,966		49,448

Foreign Currency Risk

The Company operates in the United States and 51 other countries. In general, the Company’s products are primarily manufactured and sold within the same country. The initial funding for the foreign manufacturing operations was provided primarily through the permanent investment of equity capital from the U.S. parent company. Therefore, the Company and its subsidiaries do not have significant assets or liabilities denominated in currencies other than their functional currencies. As such, the Company does not have any significant derivatives or other financial instruments that are subject to foreign currency risk at December 31, 2007 or 2006.

In October 2007, the Company issued €750.0 million of 5.25% Euro notes due October 1, 2014. The Company has significant operations with the Euro as their functional currency. The Company believes that the Euro cashflows from these businesses will be more than adequate to fund the debt obligations under these notes.

CRITICAL ACCOUNTING POLICIES

The Company has four accounting policies which it believes are important to the Company’s financial condition and results of operations, and which require the Company to make estimates about matters that are inherently uncertain.

These critical accounting policies are as follows:

Realizability of Inventories—Inventories are stated at the lower of cost or market. Generally, the Company’s operating units perform an analysis of the historical sales usage of the individual inventory items on hand and a reserve is recorded to adjust inventory cost to market value based on the following usage criteria:

USAGE CLASSIFICATION	CRITERIA	RESERVE %
Active	Quantity on hand is less than prior 6 months’ usage		0	%
Slow-moving	Some usage in last 12 months, but quantity on hand exceeds prior 6 months’ usage		50	%
Obsolete	No usage in the last 12 months		90	%

In addition, for the majority of U.S. operations, the Company has elected to use the last-in, first-out (“LIFO”) method of inventory costing. Generally, this method results in a lower inventory value than the first-in, first-out (“FIFO”) method due to the effects of inflation.

Collectibility of Accounts Receivable—The Company estimates the allowance for uncollectible accounts based on the greater of a specific reserve for past due accounts or a reserve calculated based on the historical write-off percentage over the last two years. In addition, the allowance for uncollectible accounts includes reserves for customer credits and cash discounts, which are also estimated based on past experience.

46     2007 Annual Report

Depreciation of Plant and Equipment—The Company’s U.S. businesses compute depreciation on an accelerated basis, as follows:

Buildings and improvements	150% declining balance
Machinery and equipment	200% declining balance

The majority of the international businesses compute depreciation on a straight-line basis to conform to their local statutory accounting and tax regulations.

Income Taxes—The Company provides deferred income tax assets and liabilities based on the estimated future tax effects of differences between the financial and tax bases of assets and liabilities based on currently enacted tax laws. The Company’s deferred and other tax balances are based on management’s interpretation of the tax regulations and rulings in numerous taxing jurisdictions. Income tax expense and liabilities recognized by the Company also reflects its best estimates and assumptions regarding, among other things, the level of future taxable income and effect of the Company’s various tax planning strategies. Future tax authority rulings and changes in tax laws, changes in projected levels of taxable income and future tax planning strategies could affect the actual effective tax rate and tax balances recorded by the Company.

The Company believes that the above critical policies have resulted in past actual results approximating the estimated amounts in those areas.

FORWARD-LOOKING STATEMENTS

This annual report contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including, without limitation, statements regarding the Company’s adequacy of internally generated funds, the meeting of dividend payout objectives, the ability to fund debt service obligations, payments under guarantees, the Company’s portion of future benefit payments related to pension and postretirement benefits, the availability of additional financing, the outcome of outstanding legal proceedings, the impact of adopting new accounting pronouncements and the estimated amount of unrecognized tax benefits. These statements are subject to certain risks, uncertainties, and other factors, which could cause actual results to differ materially from those anticipated. Important risks that may influence future results include (1) a downturn or further downturn in the construction, general industrial, automotive or food institutional/restaurant and service markets, (2) deterioration in international and domestic business and economic conditions, particularly in North America, Europe, Asia or Australia, (3) the unfavorable impact of foreign currency fluctuations and costs of raw materials, (4) an interruption in, or reduction in, introducing new products into the Company’s product lines, (5) an unfavorable environment for making acquisitions, domestic and international, including adverse accounting or regulatory requirements and market values of candidates, and (6) unfavorable tax law changes and tax authority rulings. The risks covered here are not all inclusive and given these and other possible risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.

ITW practices fair disclosure for all interested parties. Investors should be aware that while ITW regularly communicates with securities analysts and other investment professionals, it is against ITW’s policy to disclose to them any material non-public information or other confidential commercial information. Shareholders should not assume that ITW agrees with any statement or report issued by any analyst irrespective of the content of the statement or report.

Illinois Tool Works Inc.     47

Management Report on Internal Control Over Financial Reporting

The management of Illinois Tool Works Inc. (“ITW”) is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). ITW’s internal control system was designed to provide reasonable assurance to the Company’s management and Board of Directors regarding the preparation and fair presentation of published financial statements.

All internal control systems, no matter how well designed, have inherent limitations. Therefore, even those systems determined to be effective can provide only reasonable assurance with respect to financial statement preparation and presentation.

ITW management assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2007. In making this assessment, it used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control—Integrated Framework. Based on our assessment we believe that, as of December 31, 2007, the Company’s internal control over financial reporting is effective based on those criteria.

The effectiveness of the Company’s internal control over financial reporting as of December 31, 2007 has been audited by Deloitte & Touche LLP, an independent registered public accounting firm, as stated in their report herein.

/s/ David B. Speer	/s/ Ronald D. Kropp
Chairman & Chief Executive Officer	Senior Vice President & Chief Financial Officer
February 27, 2008	February 27, 2008

48     2007 Annual Report

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of Illinois Tool Works Inc.:

We have audited the accompanying statement of financial position of Illinois Tool Works Inc. and Subsidiaries (the “Company”) as of December 31, 2007 and 2006, and the related statements of income, income reinvested in the business, comprehensive income, and cash flows for each of the three years in the period ended December 31, 2007. We also have audited the Company’s internal control over financial reporting as of December 31, 2007, based on the criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company’s management is responsible for these financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying management report on internal control over financial reporting. Our responsibility is to express an opinion on these financial statements and an opinion on the Company’s internal control over financial reporting based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed by, or under the supervision of, the company’s principal executive and principal financial officers, or persons performing similar functions, and effected by the company’s board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2007 and 2006, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2007, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2007, based on the criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission.

/s/ Deloitte & Touche LLP

Chicago, Illinois
February 27, 2008

Illinois Tool Works Inc.     49

Statement of Income
Illinois Tool Works Inc. and Subsidiaries

	FOR THE YEARS ENDED DECEMBER 31
IN THOUSANDS EXCEPT FOR PER SHARE AMOUNTS	2007			2006			2005
Operating Revenues	$	16,170,611		$	13,798,995		$	12,540,360
Cost of revenues		10,455,185			8,886,890			8,158,920
Selling, administrative, and research and development expenses		2,930,628			2,402,147			2,182,368
Amortization and impairment of goodwill and other intangible assets		161,042			124,544			83,842
Operating Income		2,623,756			2,385,414			2,115,230
Interest expense		(102,092	)		(85,409	)		(93,994	)
Other income		59,315			90,977			135,005
Income from Continuing Operations Before Income Taxes		2,580,979			2,390,982			2,156,241
Income taxes		754,900			710,405			675,806
Income from Continuing Operations		1,826,079			1,680,577			1,480,435
Income from Discontinued Operations		43,783			37,169			14,434
Net Income	$	1,869,862		$	1,717,746		$	1,494,869
Income Per Share from Continuing Operations:
Basic	$	3.31		$	2.97		$	2.59
Diluted	$	3.28		$	2.95		$	2.57
Income Per Share from Discontinued Operations:
Basic	$	0.08		$	0.07		$	0.03
Diluted	$	0.08		$	0.07		$	0.03
Net Income Per Share:
Basic	$	3.39		$	3.04		$	2.62
Diluted	$	3.36		$	3.01		$	2.60

Statement of Income Reinvested in the Business
Illinois Tool Works Inc. and Subsidiaries

	FOR THE YEARS ENDED DECEMBER 31
IN THOUSANDS	2007			2006			2005
Beginning Balance	$	10,406,511		$	9,112,328		$	7,963,518
Net income		1,869,862			1,717,746			1,494,869
Cash dividends declared		(533,519	)		(423,563	)		(346,059	)
Retirement of treasury shares		(1,841,230	)		—			—
Cumulative effect of adopting new accounting standard, net of tax		(22,559	)		—			—
Ending Balance	$	9,879,065		$	10,406,511		$	9,112,328

Statement of Comprehensive Income
Illinois Tool Works Inc. and Subsidiaries

	FOR THE YEARS ENDED DECEMBER 31
IN THOUSANDS	2007		2006		2005
Net Income	$	1,869,862	$	1,717,746	$	1,494,869
Other Comprehensive Income:
Foreign currency translation adjustments		424,037		495,697		(296,248	)
Pension and other postretirement benefit adjustments, net of tax		180,110		8,967		4,845
Comprehensive Income	$	2,474,009	$	2,222,410	$	1,203,466

The Notes to Financial Statements are an integral part of these statements.

50     2007 Annual Report

Statement of Financial Position
Illinois Tool Works Inc. and Subsidiaries

	DECEMBER 31
IN THOUSANDS EXCEPT SHARES	2007			2006
Assets
Current Assets:
Cash and equivalents	$	827,524		$	590,207
Trade receivables		2,915,546			2,471,273
Inventories		1,625,820			1,482,508
Deferred income taxes		189,093			196,860
Prepaid expenses and other current assets		607,672			465,557
Total current assets		6,165,655			5,206,405
Plant and Equipment:
Land		226,208			193,328
Buildings and improvements		1,476,673			1,374,926
Machinery and equipment		3,852,241			3,594,057
Equipment leased to others		154,111			149,682
Construction in progress		109,267			96,853
		5,818,500			5,408,846
Accumulated depreciation		(3,624,490	)		(3,355,389	)
Net plant and equipment		2,194,010			2,053,457
Investments		507,567			595,083
Goodwill		4,387,165			4,025,053
Intangible Assets		1,296,176			1,113,634
Deferred Income Taxes		61,416			116,245
Other Assets		913,873			770,562
	$	15,525,862		$	13,880,439
Liabilities and Stockholders’ Equity
Current Liabilities:
Short-term debt	$	410,512		$	462,721
Accounts payable		854,148			707,656
Accrued expenses		1,341,817			1,187,526
Cash dividends payable		148,427			117,337
Income taxes payable		205,381			161,344
Total current liabilities		2,960,285			2,636,584
Noncurrent Liabilities:
Long-term debt		1,888,839			955,610
Deferred income taxes		260,658			259,159
Other		1,064,755			1,011,578
Total noncurrent liabilities		3,214,252			2,226,347
Stockholders’ Equity:
Common stock:
Issued—562,522,026 shares in 2007 and 630,900,742 shares in 2006		5,625			6,309
Additional paid-in-capital		173,610			1,378,587
Income reinvested in the business		9,879,065			10,406,511
Common stock held in treasury		(1,757,761	)		(3,220,538	)
Accumulated other comprehensive income		1,050,786			446,639
Total stockholders’ equity		9,351,325			9,017,508
	$	15,525,862		$	13,880,439

The Notes to Financial Statements are an integral part of this statement.

Illinois Tool Works Inc.     51

Statement of Cash Flows
Illinois Tool Works Inc. and Subsidiaries

	FOR THE YEARS ENDED DECEMBER 31
IN THOUSANDS	2007			2006			2005
Cash Provided by (Used for) Operating Activities:
Net income	$	1,869,862		$	1,717,746		$	1,494,869
Adjustments to reconcile net income to cash provided by operating activities:
Depreciation		363,701			319,362			299,232
Amortization and impairment of goodwill and other intangible assets		161,043			124,544			83,842
Change in deferred income taxes		(5,522	)		167,003			69,745
Provision for uncollectible accounts		5,998			8,727			7,156
Loss on sale of plant and equipment		743			1,149			4,289
Income from investments		(47,880	)		(78,608	)		(126,278	)
(Gain) loss on sale of operations and affiliates		(34,807	)		(16,795	)		8,548
Stock compensation expense		30,781			34,781			64,144
Other non-cash items, net		(3,451	)		510			(1,875	)
Change in assets and liabilities:
(Increase) decrease in—
Trade receivables		(56,971	)		(45,581	)		(58,902	)
Inventories		(4,543	)		(60,204	)		104,419
Prepaid expenses and other assets		(15,676	)		(63,930	)		(82,280	)
Increase (decrease) in—
Accounts payable		(37,823	)		10,941			(39,216	)
Accrued expenses and other liabilities		(2,301	)		1,314			35,491
Income taxes receivable and payable		260,427			(55,261	)		(16,647	)
Other, net		716			330			5,006
Net cash provided by operating activities		2,484,297			2,066,028			1,851,543
Cash Provided by (Used for) Investing Activities:
Acquisition of businesses (excluding cash and equivalents) and additional interest in affiliates		(812,757	)		(1,378,708	)		(626,922	)
Additions to plant and equipment		(353,355	)		(301,006	)		(293,102	)
Purchases of investments		(28,734	)		(25,347	)		(120,240	)
Proceeds from investments		91,184			367,365			220,082
Proceeds from sale of plant and equipment		21,821			14,190			33,860
Proceeds from sale of operations and affiliates		160,457			40,303			1,475
Other, net		(2,664	)		8,788			(4,559	)
Net cash used for investing activities		(924,048	)		(1,274,415	)		(789,406	)
Cash Provided by (Used for) Financing Activities:
Cash dividends paid		(502,430	)		(398,846	)		(335,092	)
Issuance of common stock		116,665			78,969			24,563
Repurchases of common stock		(1,757,761	)		(446,876	)		(1,041,798	)
Net proceeds (repayments) of short-term debt		(266,968	)		194,896			44,406
Proceeds from long-term debt		1,062,108			177			58,661
Repayments of long-term debt		(17,754	)		(16,632	)		(9,941	)
Excess tax benefits from share-based compensation		16,212			13,086			12,879
Repayment of preferred stock of subsidiary		(40,000	)		—			(20,000	)
Net cash used for financing activities		(1,389,928	)		(575,226	)		(1,266,322	)
Effect of Exchange Rate Changes on Cash and Equivalents		66,996			3,403			(92,788	)
Cash and Equivalents:
Increase (decrease) during the year		237,317			219,790			(296,973	)
Beginning of year		590,207			370,417			667,390
End of year	$	827,524		$	590,207		$	370,417
Cash Paid During the Year for Interest	$	132,757		$	75,026		$	99,115
Cash Paid During the Year for Income Taxes, Net of Refunds	$	448,102		$	646,647		$	622,451
Liabilities Assumed from Acquisitions	$	465,303		$	448,561		$	270,726

The Notes to Financial Statements are an integral part of this statement. See the Acquisitions note for information regarding non-cash transactions.

52     2007 Annual Report

Notes to Financial Statements

The Notes to Financial Statements furnish additional information on items in the financial statements. The notes have been arranged in the same order as the related items appear in the statements.

Illinois Tool Works Inc. (the “Company” or “ITW”) is a multinational manufacturer of a diversified range of industrial products and equipment with approximately 825 operations in 52 countries. The Company primarily serves the construction, automotive, general industrial and food institutional/restaurant markets.

Significant accounting principles and policies of the Company are in italics. Certain reclassifications of prior years’ data have been made to conform to current year reporting.

The preparation of the Company’s financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in the financial statements and the notes to financial statements. Actual results could differ from those estimates. The significant estimates included in the preparation of the financial statements are related to inventories, trade receivables, plant and equipment, income taxes, goodwill and intangible assets, product liability matters, litigation, product warranties, pensions, other postretirement benefits, environmental matters and stock options.

Consolidation and Translation—The financial statements include the Company and substantially all of its majority-owned subsidiaries. All significant intercompany transactions are eliminated from the financial statements. Substantially all of the Company’s foreign subsidiaries outside North America have November 30 fiscal year-ends to facilitate inclusion of their financial statements in the December 31 consolidated financial statements.

Foreign subsidiaries’ assets and liabilities are translated to U.S. dollars at end-of-period exchange rates. Revenues and expenses are translated at average rates for the period. Translation adjustments are reported as a component of accumulated other comprehensive income in stockholders’ equity.

Discontinued Operations—In 2007 and 2006, the Company completed the divestitures of certain construction, consumer packaging and automotive machinery businesses. In addition, a consumer packaging and an automotive components business have been classified as held for sale as of December 31, 2007. Due to the aggregate significance of these five businesses, the consolidated statements of income have been restated to present the operating results of all five businesses, along with the gains realized, net of tax, as discontinued operations for 2007, 2006 and 2005. Assets of $143,529,000 and liabilities of $5,844,000 related to the two businesses held for sale as of December 31, 2007 have been reclassified to prepaids and other current assets and accrued expenses, respectively.

Results of the discontinued operations for the years ended December 31, 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007		2006			2005
Operating revenues	$	108,253	$	256,054		$	249,934
Income before taxes	$	5,721	$	35,144		$	25,328
Gain on sale of discontinued operations		33,168		19,120			—
Income tax benefit (expense)		4,894		(17,095	)		(10,894	)
Income from discontinued operations	$	43,783	$	37,169		$	14,434

Acquisitions—The Company accounts for acquisitions under the purchase method, in which assets acquired and liabilities assumed are recorded at fair value as of the date of acquisition. The operating results of the acquired companies are included in the Company’s consolidated financial statements from the date of acquisition. Acquisitions, individually and in the aggregate, did not materially affect the Company’s results of operations or financial position. Summarized information related to acquisitions is as follows:

IN THOUSANDS EXCEPT NUMBER OF ACQUISITIONS	2007		2006		2005
Number of acquisitions		52		53		22
Net cash paid during the year	$	812,757	$	1,378,708	$	626,922
Value of shares issued for acquisitions	$	—	$	162,898	$	—

There were no significant non-cash transactions in 2007 and 2005. The Company’s only significant non-cash transaction during 2006 related to the exchange of the Company’s common stock as consideration for an acquisition.

Illinois Tool Works Inc.     53

The premium over tangible net assets recorded for acquisitions based on purchase price allocations during 2007, 2006 and 2005 were as follows:

	2007				2006				2005
	WEIGHTED-				WEIGHTED-				WEIGHTED-
	AVERAGE		PREMIUM		AVERAGE		PREMIUM		AVERAGE		PREMIUM
IN THOUSANDS EXCEPT FOR WEIGHTED-AVERAGE LIVES (YEARS)	LIFE		RECORDED		LIFE		RECORDED		LIFE		RECORDED
Goodwill			$	345,805			$	778,215			$	296,476
Amortizable Intangible Assets:
Customer lists and relationships		10.8		161,119		10.5		246,130		12.0		112,328
Patents and proprietary technology		9.9		88,000		9.1		75,131		10.5		29,079
Trademarks and brands		16.6		62,562		15.4		67,940		14.4		50,174
Software		5.2		8,550		6.3		80,687		7.1		24,006
Noncompete agreements		4.2		11,167		4.0		20,411		2.0		6,424
Other		1.5		4,366		1.3		8,407		1.0		7,268
Total Amortizable Intangible Assets		11.2		335,764		9.9		498,706		11.2		229,279
Indefinite-lived Intangible Assets:
Trademarks and brands				23,658				4,610				30,980
Total Premium Recorded			$	705,227			$	1,281,531			$	556,735

Of the total goodwill recorded for acquisitions, the Company expects goodwill of $142,368,000 in 2007, $103,569,000 in 2006 and $77,005,000 in 2005 will be tax deductible. The Company anticipates subsequent purchase accounting adjustments will change the initial amounts recorded for goodwill and intangible assets, primarily due to the completion of valuations.

In December 2007, the Financial Accounting Standards Board (“FASB”) issued Statement of Financial Accounting Standards No. 141 (revised 2007), Business Combinations (“SFAS 141R”). SFAS 141R requires an entity to recognize assets acquired, liabilities assumed, contractual contingencies and contingent consideration at their fair value on the acquisition date. SFAS 141R also requires that (1) acquisition-related costs be expensed as incurred; (2) restructuring costs generally be recognized as a post-acquisition expense; and (3) changes in deferred tax asset valuation allowances and income tax uncertainties after the measurement period impact income tax expense. The Company will adopt SFAS 141R on January 1, 2009 and is currently evaluating this statement to determine its effect, if any, on the Company’s results of operations and financial position.

Operating Revenues are recognized when the risks and rewards of ownership are transferred to the customer, which is generally at the time of product shipment. No single customer accounted for more than 5% of consolidated revenues in 2007, 2006 or 2005.

Research and Development Expenses are recorded as expense in the year incurred. These costs were $203,488,000 in 2007, $147,206,000 in 2006 and $126,305,000 in 2005.

Rental Expense was $150,200,000 in 2007, $123,957,000 in 2006 and $115,710,000 in 2005. Future minimum lease payments for the years ending December 31 are as follows:

IN THOUSANDS
2008	$	135,172
2009		102,553
2010		74,773
2011		47,278
2012		36,213
2013 and future years		69,448
	$	465,437

Advertising Expenses are recorded as expense in the year incurred. These costs were $114,304,000 in 2007, $98,355,000 in 2006 and $79,617,000 in 2005.

54     2007 Annual Report

Other Income (Expense) consisted of the following:

IN THOUSANDS	2007			2006			2005
Investment income	$	47,880		$	78,608		$	126,278
Interest income		20,164			30,483			26,880
Loss on foreign currency transactions		(13,128	)		(9,344	)		(2,807	)
Other, net		4,399			(8,770	)		(15,346	)
	$	59,315		$	90,977		$	135,005

Income Taxes—The Company utilizes the asset and liability method of accounting for income taxes. Deferred income taxes are determined based on the estimated future tax effects of differences between the financial and tax bases of assets and liabilities given the provisions of the enacted tax laws. The components of the provision for income taxes on continuing operations were as shown below:

IN THOUSANDS	2007			2006			2005
U.S. federal income taxes:
Current	$	422,592		$	363,233		$	399,629
Deferred		68,078			113,861			148,556
Benefit of net operating loss and foreign tax credits carryforwards		(2,212	)		(24,755	)		(112,381	)
	$	488,458		$	452,339		$	435,804
Foreign income taxes:
Current	$	262,832		$	267,552		$	154,022
Deferred		(22,487	)		9,617			36,170
Benefit of net operating loss carryforwards		(22,128	)		(58,273	)		(7,047	)
	$	218,217		$	218,896		$	183,145
State income taxes:
Current	$	46,527		$	43,068		$	54,648
Deferred		1,698			(3,898	)		9,685
Benefit of net operating loss carryforwards		—			—			(7,476	)
		48,225			39,170			56,857
	$	754,900		$	710,405		$	675,806

Income from continuing operations before income taxes for domestic and foreign operations was as follows:

IN THOUSANDS	2007		2006		2005
Domestic	$	1,641,714	$	1,462,831	$	1,391,176
Foreign		939,265		928,151		765,065
	$	2,580,979	$	2,390,982	$	2,156,241

The reconciliation between the U.S. federal statutory tax rate and the effective tax rate was as follows:

	2007			2006			2005
U.S. federal statutory tax rate		35.0	%		35.0	%		35.0	%
State income taxes, net of U.S. federal tax benefit		1.3			1.1			1.7
Differences between U.S. federal statutory and foreign tax rates		(1.7	)		(1.1	)		(1.2	)
Nontaxable foreign interest income		(2.7	)		(2.4	)		(2.4	)
Tax effect of foreign dividends		0.3			0.2			1.0
Tax relief for U.S. manufacturers		(0.9	)		(0.5	)		(0.4	)
Other, net		(2.1	)		(2.6	)		(2.4	)
Effective tax rate		29.2	%		29.7	%		31.3	%

Illinois Tool Works Inc.     55

In 2004, the Company recorded a deferred tax liability of $25,000,000 to reflect the estimated tax cost of the minimum foreign dividends repatriated under the American Jobs Creation Act during 2005. During 2005, the Company repatriated foreign dividends of $1,404,000,000 and incurred an additional tax cost of $17,400,000. Deferred U.S. federal income taxes and foreign withholding taxes have not been provided on the remaining undistributed earnings of certain international subsidiaries of approximately $4,000,000,000 and $2,900,000,000 as of December 31, 2007 and 2006, respectively, as these earnings are considered permanently invested. Upon repatriation of these earnings to the United States in the form of dividends or otherwise, the Company may be subject to U.S. income taxes and foreign withholding taxes. The actual U.S. tax cost would depend on income tax laws and circumstances at the time of distribution. Determination of the related tax liability is not practicable because of the complexities associated with the hypothetical calculation.

The components of deferred income tax assets and liabilities at December 31, 2007 and 2006 were as follows:

	2007						2006
IN THOUSANDS	ASSET			LIABILITY			ASSET			LIABILITY
Goodwill and intangible assets	$	157,520		$	(532,052	)	$	132,906		$	(497,597	)
Inventory reserves, capitalized tax cost and LIFO inventory		53,268			(17,208	)		41,500			(18,636	)
Investments		18,204			(233,839	)		45,163			(220,360	)
Plant and equipment		22,580			(88,092	)		16,550			(95,896	)
Accrued expenses and reserves		121,760			—			129,250			—
Employee benefit accruals		282,431			—			303,579			—
Foreign tax credit carryforwards		102,818			—			76,855			—
Net operating loss carryforwards		357,285			—			345,531			—
Capital loss carryforwards		74,586			—			67,092			—
Allowances for uncollectible accounts		14,812			—			12,439			—
Prepaid pension assets		—			(99,554	)		—			(29,776	)
Other		102,988			(29,386	)		71,403			(38,650	)
Gross deferred income tax assets (liabilities)		1,308,252			(1,000,131	)		1,242,268			(900,915	)
Valuation allowances		(318,270	)		—			(287,407	)		—
Total deferred income tax assets (liabilities)	$	989,982		$	(1,000,131	)	$	954,861		$	(900,915	)

Valuation allowances are established when it is estimated that it is more likely than not that the tax benefit of the deferred tax asset will not be realized. The valuation allowances recorded at December 31, 2007 and 2006 relate primarily to certain net operating loss carryforwards and capital loss carryforwards. Included in the total valuation allowances at December 31, 2007 were allowances of $31,631,000 that relate to acquired net operating loss carryforwards that, if adjusted in 2008, would reduce goodwill.

At December 31, 2007, the Company had net operating loss carryforwards available to offset future taxable income in the United States and certain foreign jurisdictions, which expire as follows:

IN THOUSANDS	GROSS NET OPERATING LOSS CARRYFORWARDS
2008	$	25,588
2009		6,804
2010		8,992
2011		7,030
2012		11,102
2013		8,144
2014		1,943
2015		2,068
2016		5,530
2017		1,657
2018		4,247
2019		8,148
2020		46,458
2021		64,582
2022		28,688
2023		61,060
2024		63,540
2025		15,474
2026		654
Do not expire		976,425
	$	1,348,134

56     2007 Annual Report

On January 1, 2007, the Company adopted FASB Interpretation No. 48, Accounting for Uncertainty in Income Taxes – an interpretation of FASB Statement No. 109 (“FIN 48”). FIN 48 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of tax positions taken and expected to be taken in tax returns and provides guidance related to uncertain tax positions on derecognition, classification, and interest and penalties. As a result of implementation of FIN 48, the Company did not recognize any change in its liability for unrecognized tax benefits.

The changes in the amount of unrecognized tax benefits during 2007 were as follows:

IN THOUSANDS
Balance at January 1, 2007	$	688,000
Additions based on tax positions related to the current year		55,000
Additions for tax positions of prior years		116,000
Reductions for tax positions of prior years		(86,000	)
Settlements		(26,000	)
Foreign currency translation		26,000
Balance at December 31, 2007	$	773,000

Included in the balance at December 31, 2007, are approximately $449,000,000 of tax positions that, if recognized, would impact the Company’s effective tax rate. As of December 31, 2007, the Company does not expect any significant changes to the estimated amount of unrecognized tax benefits for any significant individual tax positions in the next twelve months.

The Company files numerous consolidated and separate tax returns in the United States Federal jurisdiction and in many state and foreign jurisdictions. The following table summarizes the open tax years for the Company’s major jurisdictions:

JURISDICTION	OPEN TAX YEARS
United States—Federal		2001-2007
United Kingdom		2000-2007
Germany		2001-2007
France		2000-2007
Australia		2002-2007

The Company recognizes interest and penalties related to income tax matters in income tax expense. There were no significant accruals for interest and penalties recorded as of December 31, 2007.

Income from Continuing Operations Per Share is computed by dividing income from continuing operations by the weighted-average number of shares outstanding for the period. Income from continuing operations per diluted share is computed by dividing income from continuing operations by the weighted-average number of shares assuming dilution for stock options and restricted stock. Dilutive shares reflect the potential additional shares that would be outstanding if the dilutive stock options outstanding were exercised and the unvested restricted stock vested during the period. The computation of income from continuing operations per share was as follows:

IN THOUSANDS EXCEPT PER SHARE AMOUNTS	2007		2006		2005
Income from continuing operations	$	1,826,079	$	1,680,577	$	1,480,435
Income from continuing operations per share—Basic:
Weighted-average common shares		551,549		565,632		571,058
Income from continuing operations per share—Basic		$3.31		$2.97		$2.59
Income from continuing operations per share—Diluted:
Weighted-average common shares		551,549		565,632		571,058
Effect of dilutive stock options and restricted stock		4,481		4,260		4,376
Weighted-average common shares assuming dilution		556,030		569,892		575,434
Income from continuing operations per share—Diluted		$3.28		$2.95		$2.57

Options that were considered antidilutive were not included in the computation of diluted income from continuing operations per share. The antidilutive options outstanding as of December 31, 2007, 2006 and 2005 were 3,658,862, 8,172,240 and 4,777,138, respectively.

Cash and Equivalents included interest-bearing instruments of $367,824,000 at December 31, 2007 and $234,310,000 at December 31, 2006. Interest-bearing instruments have maturities of 90 days or less and are stated at cost, which approximates market.

Illinois Tool Works Inc.     57

Trade Receivables were net of allowances for uncollectible accounts. The changes in the allowances for uncollectible accounts during 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007			2006			2005
Beginning balance	$	(61,649	)	$	(51,178	)	$	(56,205	)
Provision charged to expense		(5,998	)		(8,727	)		(7,156	)
Write-offs, net of recoveries		10,156			10,465			14,392
Acquisitions and divestitures		(12,886	)		(8,658	)		(5,931	)
Other		(4,439	)		(3,551	)		3,722
Ending balance	$	(74,816	)	$	(61,649	)	$	(51,178	)

Inventories at December 31, 2007 and 2006 were as follows:

IN THOUSANDS	2007		2006
Raw material	$	516,914	$	470,032
Work-in-process		182,990		166,946
Finished goods		925,916		845,530
	$	1,625,820	$	1,482,508

Inventories are stated at the lower of cost or market and include material, labor and factory overhead. The last-in, first-out (“LIFO”) method is used to determine the cost of the inventories of a majority of the U.S. operations. Inventories priced at LIFO were 27% and 29% of total inventories as of December 31, 2007 and 2006, respectively. The first-in, first-out (“FIFO”) method, which approximates current cost, is used for all other inventories. If the FIFO method was used for all inventories, total inventories would have been approximately $124,019,000 and $117,093,000 higher than reported at December 31, 2007 and 2006, respectively.

Prepaid Expenses and Other Current Assets as of December 31, 2007 and 2006 were as follows:

IN THOUSANDS	2007		2006
Income tax refunds receivable	$	236,735	$	261,792
Assets of businesses held for sale		143,529		—
Value-added-tax receivables		52,834		40,177
Insurance		30,229		44,271
Other		144,345		119,317
	$	607,672	$	465,557

Plant and Equipment are stated at cost less accumulated depreciation. Renewals and improvements that increase the useful life of plant and equipment are capitalized. Maintenance and repairs are charged to expense as incurred.

Depreciation was $360,452,000 in 2007, $311,987,000 in 2006 and $291,564,000 in 2005, and was reflected primarily in cost of revenues. Discontinued operations depreciation was $3,249,000 in 2007, $7,375,000 in 2006 and $7,668,000 in 2005 and was reflected in income from discontinued operations. Depreciation of plant and equipment for financial reporting purposes is computed on an accelerated basis for U.S. businesses and on a straight-line basis for a majority of the international businesses.

The range of useful lives used to depreciate plant and equipment is as follows:

Buildings and improvements	10—50 years
Machinery and equipment	3—20 years
Equipment leased to others	Term of lease

Investments as of December 31, 2007 and 2006 consisted of the following:

IN THOUSANDS	2007		2006
Leases of equipment	$	278,549	$	310,598
Affordable housing limited partnerships		97,022		114,594
Venture capital limited partnership		81,462		91,365
Property developments		21,926		19,709
Other		28,608		58,817
	$	507,567	$	595,083

58     2007 Annual Report

Leases of Equipment

The components of the investment in leases of equipment at December 31, 2007 and 2006 were as shown below:

IN THOUSANDS	2007			2006
Leveraged, direct financing and sales-type leases:
Gross lease contracts receivable, net of nonrecourse debt service	$	146,109		$	155,774
Estimated residual value of leased assets		248,119			248,119
Unearned income		(127,589	)		(105,914	)
		266,639			297,979
Equipment under operating leases		11,910			12,619
	$	278,549		$	310,598

Deferred tax liabilities related to leveraged and direct financing leases were $226,549,000 and $213,267,000 at December 31, 2007 and 2006, respectively.

The investment in leases of equipment at December 31, 2007 and 2006 relates to the following types of equipment:

IN THOUSANDS	2007		2006
Telecommunications	$	174,212	$	196,348
Air traffic control		64,540		70,280
Aircraft		39,296		43,033
Manufacturing		501		937
	$	278,549	$	310,598

In 2003, the Company entered into a leveraged lease transaction related to air traffic control equipment in Australia with a cash investment of $48,763,000. In 2002, the Company entered into leveraged leasing transactions related to mobile telecommunications equipment with two major European telecommunications companies with a cash investment of $144,676,000. Under the terms of the telecommunications and air traffic control lease transactions, the lessees have made upfront payments to creditworthy third-party financial institutions that are acting as payment undertakers. These payment undertakers are obligated to make the required scheduled payments directly to the nonrecourse debt holders and to the lessors, including the Company. In the event of default by the lessees, the Company can recover its net investment from the payment undertakers. In addition, the lessees are required to purchase residual value insurance from a creditworthy third party at a date near the end of the lease term.

The income from leveraged, direct financing and sales-type leases was $5,347,000, $1,752,000 and $8,943,000 for the years ended December 31, 2007, 2006 and 2005, respectively. Unearned income is recognized as lease income over the life of the lease based on the effective yield of the lease. The residual values of leased assets are estimated at the inception of the lease based on market appraisals and reviewed for impairment at least annually.

On January 1, 2007, the Company adopted FASB staff position No. FAS 13-2, Accounting for a Change or Projected Change in the Timing of Cash Flows Relating to Income Taxes Generated by a Leveraged Lease Transaction (“FSP 13-2”). FSP 13-2 addresses how a change or projected change in the timing of cash flows relating to income taxes generated by a leveraged lease transaction affects the accounting by a lessor for that lease. Upon adoption of FSP 13-2, the Company recorded an after-tax charge to retained earnings of $22,600,000, resulting from a change in the timing of expected cash flows related to income tax benefits of the Company’s leveraged lease transactions.

Other Investments

The Company has entered into several affordable housing limited partnerships primarily to receive tax benefits in the form of tax credits and tax deductions from operating losses. These affordable housing investments are accounted for using the effective yield method, in which the investment is amortized to income tax expense as the tax benefits are received. The tax credits are credited to income tax expense as they are allocated to the Company.

The Company entered into a venture capital limited partnership in 2001 that invests in late-stage venture capital opportunities. The Company has a 25% limited partnership interest and accounts for this investment using the equity method, whereby the Company recognizes its proportionate share of the partnership’s income or loss. The partnership’s financial statements are prepared on a mark-to-market basis.

The Company has invested in property developments with a residential construction developer through partnerships in which the Company has a 50% interest. These partnership investments are accounted for using the equity method, whereby the Company recognizes its proportionate share of the partnerships’ income or loss.

The Company neither bears the majority of the risk of loss nor enjoys the majority of any residual returns relative to the property development investments and affordable housing investments, therefore it does not consolidate those entities. The Company’s maximum exposure to loss related to the property development investments and affordable housing investments is $29,551,000 and $97,022,000, respectively, as of December 31, 2007.

Illinois Tool Works Inc.     59

Cash Flows

Cash flows related to investments during 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007			2006			2005
Cash used to purchase investments:
Affordable housing limited partnerships	$	(16,789	)	$	(17,814	)	$	(80,822	)
Venture capital limited partnership		(8,252	)		(1,926	)		(27,242	)
Property developments		(3,414	)		(4,885	)		(11,976	)
Other		(279	)		(722	)		(200	)
	$	(28,734	)	$	(25,347	)	$	(120,240	)
Cash proceeds from investments:
Venture capital limited partnership	$	44,792		$	25,085		$	22,683
Prepaid forward contract		31,629			—			—
Leases of equipment		7,085			4,467			8,685
Properties held for sale		5,149			1,698			2,600
Property developments		2,506			2,073			13,805
Mortgage investments		—			333,976			172,288
Other		23			66			21
	$	91,184		$	367,365		$	220,082

Goodwill and Intangible Assets—Goodwill represents the excess cost over fair value of the net assets of purchased businesses. The Company does not amortize goodwill and intangible assets that have indefinite lives. In the first quarter of each year, the Company performs an annual impairment assessment of goodwill and intangible assets with indefinite lives based on the fair value of the related reporting unit or intangible asset.

As of January 1, 2007, the Company had assigned its recorded goodwill and intangible assets to approximately 440 of its then 750 reporting units. When performing its annual impairment assessment, the Company compares the fair value of each reporting unit to its carrying value. Fair values are determined by discounting estimated future cash flows at the Company’s estimated cost of capital of 10%. Estimated future cash flows are based either on current operating cash flows or on a detailed cash flow forecast prepared by the relevant operating unit. If the fair value of an operating unit is less than its carrying value, an impairment loss is recorded for the difference between the implied fair value of the unit’s goodwill and the carrying value of the goodwill.

Amortization and impairment of goodwill and other intangible assets for the years ended December 31, 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007		2006		2005
Goodwill:
Impairment	$	988	$	14,793	$	9,650
Intangible Assets:
Amortization		158,888		106,766		69,143
Impairment		1,166		2,985		5,049
	$	161,042	$	124,544	$	83,842

In 2007, the Company performed its annual impairment testing of its goodwill and intangible assets, which resulted in total impairment charges of $2,154,000. The goodwill impairment charges of $988,000 were primarily related to a French polymers business and an Asian construction business and resulted from lower estimated future cash flows than previously expected. Also in 2007, intangible asset impairments of $1,166,000 were recorded to reduce to the estimated fair value the carrying value of trademarks and customer-related intangible assets primarily related to a French polymers business in the Polymers & Fluids segment and a U.S. contamination control business in the All Other segment.

In 2006, the Company recorded goodwill impairment charges of $14,793,000, which were primarily related to a U.S. building components joist business, a Canadian stretch packaging equipment business, a European food equipment business, a U.S. thermal transfer ribbon business and an Asian construction business, and resulted from lower estimated future cash flows than previously expected. Also in 2006, intangible asset impairments of $2,985,000 were recorded to reduce to the estimated fair value the carrying value of trademarks, patents and customer-related intangible assets primarily related to a U.S. welding components business in the Power Systems & Electronics segment and a U.S. contamination control business in the All Other segment.

60     2007 Annual Report

In 2005, the Company recorded goodwill impairment charges of $9,650,000, which were primarily related to a Canadian stretch packaging equipment business and a U.S. welding components business, and resulted from lower estimated future cash flows than previously expected. Also in 2005, intangible asset impairments of $5,049,000 were recorded to reduce to the estimated fair value the carrying value of trademarks, patents and customer-related intangible assets related to a U.S. contamination control business in the All Other segment.

The changes in the carrying amount of goodwill by segment for the years ended December 31, 2007 and 2006 were as follows:

				POWER
	INDUSTRIAL			SYSTEMS &			TRANSPOR-			CONSTRUCTION			FOOD			DECORATIVE			POLYMERS			ALL
IN THOUSANDS	PACKAGING			ELECTRONICS			TATION			PRODUCTS			EQUIPMENT			SURFACES			& FLUIDS			OTHER			TOTAL
Balance Dec 31, 2005	$	567,141		$	218,929		$	374,067		$	332,173		$	80,885		$	5,802		$	384,688		$	1,045,326		$	3,009,011
2006 activity:
Acquisitions & divestitures		35,623			129,720			16,139			138,845			367			6,234			39,272			394,514			760,714
Impairment charges		(3,330	)		(833	)		—			(6,186	)		(2,262	)		—			—			(2,182	)		(14,793	)
Foreign currency translation		55,356			13,699			26,834			34,959			9,788			(28	)		17,770			111,743			270,121
Balance Dec 31, 2006		654,790			361,515			417,040			499,791			88,778			12,008			441,730			1,549,401			4,025,053
2007 activity:
Acquisitions & divestitures		14,992			14,804			44,055			26,818			75,609			2,311			84,348			17,008			279,945
Impairment charges		—			—			(107	)		(308	)		—			—			(573	)		—			(988	)
Foreign currency translation		41,662			11,604			22,629			28,065			9,979			1,459			17,419			50,253			183,070
Transfer to assets held for sale		—			—			—			—			—			—			—			(99,915	)		(99,915	)
Balance Dec 31, 2007	$	711,444		$	387,923		$	483,617		$	554,366		$	174,366		$	15,778		$	542,924		$	1,516,747		$	4,387,165

Intangible assets as of December 31, 2007 and 2006 were as follows:

	2007							2006
			ACCUMULATED							ACCUMULATED
IN THOUSANDS	COST		AMORTIZATION			NET		COST		AMORTIZATION			NET
Amortizable Intangible Assets:
Customer lists and relationships	$	676,672		$(127,681	)	$	548,991	$	540,802		$(63,394	)	$	477,408
Patents and proprietary technology		323,830		(106,777	)		217,053		239,237		(80,788	)		158,449
Trademarks and brands		247,452		(42,606	)		204,846		192,871		(25,104	)		167,767
Software		204,952		(96,753	)		108,199		182,895		(62,747	)		120,148
Noncompete agreements		122,651		(85,966	)		36,685		109,563		(70,758	)		38,805
Other		76,856		(70,256	)		6,600		71,669		(60,771	)		10,898
Total Amortizable Intangible Assets		1,652,413		(530,039	)		1,122,374		1,337,037		(363,562	)		973,475
Indefinite-lived Intangible Assets:
Trademarks and brands		173,802		—			173,802		140,159		—			140,159
Total Intangible Assets	$	1,826,215		$(530,039	)	$	1,296,176	$	1,477,196		$(363,562	)	$	1,113,634

Amortizable intangible assets are being amortized primarily on a straight-line basis over their estimated useful lives of three to 20 years.

The estimated amortization expense of intangible assets for the future years ending December 31 is as follows:

IN THOUSANDS
2008	$	154,700
2009		142,600
2010		133,400
2011		127,600
2012		116,700

Other Assets as of December 31, 2007 and 2006 consisted of the following:

IN THOUSANDS	2007		2006
Prepaid pension assets	$	404,791	$	257,537
Cash surrender value of life insurance policies		331,524		318,771
Customer tooling		57,787		47,520
Noncurrent receivables		35,182		41,788
Other		84,589		104,946
	$	913,873	$	770,562

Illinois Tool Works Inc.     61

Retirement Plans and Postretirement Benefits—The Company has both funded and unfunded defined benefit pension plans. The major domestic plan covers a substantial portion of its U.S. employees and provides benefits based on years of service and final average salary. Beginning January 1, 2007, the major domestic defined benefit plan was closed to new participants. Newly hired employees and employees from acquired businesses that are not participating in this plan are eligible for additional Company contributions under the existing defined contribution retirement plan.

The Company also has other postretirement benefit plans covering the majority of its U.S. employees. The primary postretirement health care plan is contributory with the participants’ contributions adjusted annually. The postretirement life insurance plans are noncontributory.

The Company has various defined benefit pension plans in foreign countries, predominantly the United Kingdom, Germany, Canada and Australia.

On December 31, 2006, the Company adopted Statement of Financial Accounting Standards No. 158, Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans—an amendment of FASB Statements No. 87, 88, 106 and 132(R) (“SFAS 158”). This statement requires employers to recognize the overfunded or underfunded status of defined benefit pension and postretirement plans as an asset or liability in its statement of financial position and previously unrecognized changes in that funded status through accumulated other comprehensive income. The Company recorded an after-tax charge to accumulated other comprehensive income of $180,037,000 in 2006 to recognize the funded status of its benefit plans. Effective for the 2008 fiscal year, SFAS 158 requires plan assets and liabilities to be measured as of year-end, rather than the September 30 measurement date that the Company presently uses.

Summarized information regarding the Company’s significant defined benefit pension and postretirement health care and life insurance benefit plans was as follows:

	PENSION									OTHER POSTRETIREMENT BENEFITS
IN THOUSANDS	2007			2006			2005			2007			2006			2005
Components of net periodic benefit cost:
Service cost	$	115,009		$	107,335		$	84,929		$	14,957		$	16,747		$	12,945
Interest cost		106,670			97,044			85,713			32,133			32,330			30,293
Expected return on plan assets		(156,058	)		(137,866	)		(124,382	)		(11,594	)		(7,982	)		(5,754	)
Amortization of actuarial loss		20,146			25,036			8,591			1,989			21,126			1,246
Amortization of prior service (income) cost		(2,382	)		(2,170	)		(2,277	)		6,261			6,269			6,736
Amortization of transition amount		15			64			(18	)		—			—			—
Settlement/curtailment loss		5,766			2,624			195			—			—			—
Net periodic benefit cost	$	89,166		$	92,067		$	52,751		$	43,746		$	68,490		$	45,466

62     2007 Annual Report

	PENSION						OTHER POSTRETIREMENT BENEFITS
IN THOUSANDS	2007			2006			2007			2006
Change in benefit obligation as of September 30:
Benefit obligation at beginning of period	$	2,027,636		$	1,879,661		$	557,344		$	606,022
Service cost		115,009			107,335			14,957			16,747
Interest cost		106,670			97,044			32,133			32,330
Plan participants’ contributions		7,875			5,606			16,039			15,850
Amendments		(67	)		2,685			—			—
Actuarial gain		(85,300	)		(18,494	)		(60,824	)		(70,765	)
Acquisitions		16,314			7,309			—			—
Benefits paid		(162,475	)		(130,078	)		(45,380	)		(44,972	)
Medicare subsidy received		—			—			3,486			2,612
Liabilities from (to) other plans		4,776			2,813			—			(480	)
Settlement/curtailment		(301	)		—			(3,609	)		—
Foreign currency translation		47,523			73,755			—			—
Benefit obligation at end of period	$	2,077,660		$	2,027,636		$	514,146		$	557,344
Change in plan assets as of September 30:
Fair value of plan assets at beginning of period	$	1,986,416		$	1,773,574		$	149,240		$	103,528
Actual return on plan assets		261,140			193,206			16,340			13,771
Company contributions		132,870			89,382			58,210			61,063
Plan participants’ contributions		7,875			5,606			16,039			15,850
Benefits paid		(162,475	)		(130,078	)		(45,380	)		(44,972	)
Assets from other plans		—			1,975			—			—
Foreign currency translation		36,104			52,751			—			—
Fair value of plan assets at end of period	$	2,261,930		$	1,986,416		$	194,449		$	149,240
Funded status	$	184,270		$	(41,220	)	$	(319,697	)	$	(408,104	)
Contributions after measurement date		3,443			49,694			29,731			30,214
Other immaterial plans		(16,028	)		(18,244	)		(7,994	)		(7,579	)
Net asset (liability) at end of year	$	171,685		$	(9,770	)	$	(297,960	)	$	(385,469	)
The amounts recognized in the statement of financial position as of December 31 consisted of:
Noncurrent assets	$	404,791		$	257,537		$	—		$	—
Current liabilities		(16,299	)		(13,111	)		(11,411	)		(11,139	)
Noncurrent liabilities		(216,807	)		(254,196	)		(286,549	)		(374,330	)
Net asset (liability) at end of year	$	171,685		$	(9,770	)	$	(297,960	)	$	(385,469	)
The pre-tax amounts recognized in accumulated other comprehensive income consisted of:
Net loss (gain)	$	66,655		$	279,500		$	(42,512	)	$	27,427
Prior service cost (income)		1,166			(1,289	)		32,527			38,788
Net transition obligation		2,352			2,386			—			—
	$	70,173		$	280,597		$	(9,985	)	$	66,215
Accumulated benefit obligation for all significant defined benefit pension plans	$	1,798,993		$	1,778,146
Plans with accumulated benefit obligation in excess of plan assets as of September 30:
Projected benefit obligation	$	251,569		$	334,142
Accumulated benefit obligation	$	230,736		$	300,697
Fair value of plan assets	$	38,920		$	102,609

Illinois Tool Works Inc.     63

Assumptions

The weighted-average assumptions used in the valuations of pension and other postretirement benefits were as follows:

	PENSION									OTHER POSTRETIREMENT BENEFITS
	2007			2006			2005			2007			2006			2005
Assumptions used to determine benefit obligations at September 30:
Discount rate		6.02	%		5.50	%		5.30	%		6.50	%		5.95	%		5.50	%
Rate of compensation increases		4.35			4.26			4.20			—			—			—
Assumptions used to determine net cost for years ended December 31:
Discount rate		5.50	%		5.30	%		5.67	%		5.95	%		5.50	%		5.75	%
Expected return on plan assets		8.35			8.33			7.99			7.00			7.00			7.00
Rate of compensation increases		4.26			4.20			4.35			—			—			—

The expected long-term rate of return for pension plans was developed using historical returns while factoring in current market conditions such as inflation, interest rates and equity performance. The expected long-term rate of return for the primary postretirement health care plan was developed from similar factors as the pension plans, less factors for insurance costs and mortality charges.

Assumed health care cost trend rates have an effect on the amounts reported for the postretirement health care benefit plans. The assumed health care cost trend rates used to determine the postretirement benefit obligation at September 30 were as follows:

	2007			2006			2005
Health care cost trend rate assumed for the next year		10.40	%		11.00	%		10.00	%
Ultimate trend rate		5.00	%		5.00	%		5.00	%
Year that the rate reaches the ultimate trend rate		2014			2014			2010

A one-percentage-point change in assumed health care cost trend rates would have the following effects:

	1-PERCENTAGE-		1-PERCENTAGE-
IN THOUSANDS	POINT INCREASE		POINT DECREASE
Effect on total of service and interest cost components for 2007	$	1,706	$	(1,802	)
Effect on postretirement benefit obligation at September 30, 2007	$	21,685	$	(20,576	)

Plan Assets

The target asset allocation and weighted-average asset allocations for the Company’s significant pension plans at September 30, 2007 and 2006 were as follows:

				PERCENTAGE OF PLAN
				ASSETS AT SEPTEMBER 30
ASSET CATEGORY	TARGET ALLOCATION			2007			2006
Equity securities		60 - 75	%		67	%		67	%
Debt securities		20 - 35			28			29
Real estate		0 -   1			1			1
Other		0 - 10			4			3
					100	%		100	%

The Company’s overall investment strategy for the assets in the pension funds is to achieve a balance between the goals of growing plan assets and keeping risk at a reasonable level over a long-term investment horizon. In order to reduce unnecessary risk, the pension funds are diversified across several asset classes, securities and investment managers with a focus on total return. Additionally, the Company does not use derivatives for the purpose of speculation, leverage, circumventing investment guidelines or taking risks that are inconsistent with specified guidelines.

The assets in the Company’s primary postretirement health care plan are invested in life insurance policies. The Company’s overall investment strategy for the assets in the postretirement health care fund is to invest in assets that provide a reasonable rate of return while preserving capital and are exempt from U.S. federal income taxes.

64     2007 Annual Report

Cash Flows

The Company generally funds its pension plans to the extent such contributions are tax deductible. The Company expects to contribute $44,400,000 to its pension plans and $60,100,000 to its other postretirement benefit plans in 2008.

The Company’s portion of the benefit payments that are expected to be paid during the years ending December 31 is as follows:

			OTHER
			POSTRETIREMENT
IN THOUSANDS	PENSION BENEFITS		BENEFITS
2008	$	171,036	$	39,062
2009		174,745		41,038
2010		182,328		43,161
2011		189,693		45,237
2012		195,434		45,916
Years 2013-2017		1,026,813		241,003

In addition to the above pension benefits, the Company sponsors defined contribution retirement plans covering the majority of its U.S. employees. The Company’s expense for these plans was $60,100,000 in 2007, $44,698,000 in 2006 and $37,367,000 in 2005.

Short-Term Debt as of December 31, 2007 and 2006 consisted of the following:

IN THOUSANDS	2007		2006
Bank overdrafts	$	37,992	$	45,259
Commercial paper		200,977		200,340
European facilities		—		184,996
Current maturities of long-term debt		158,590		16,684
Other borrowings by foreign subsidiaries		12,953		15,442
	$	410,512	$	462,721

Commercial paper is issued at a discount and generally matures 30 to 90 days from the date of issuance. The weighted-average interest rate on commercial paper was 4.1% at December 31, 2007 and 5.3% at December 31, 2006.

The weighted-average interest rate on other borrowings by foreign subsidiaries was 2.2% at December 31, 2007 and 2.4% at December 31, 2006.

In June 2007, the Company entered into a $1,000,000,000 Line of Credit Agreement with a termination date of June 13, 2008. No amounts were outstanding under this facility at December 31, 2007.

As of December 31, 2007, the Company has unused capacity of approximately $425,497,000 under international debt facilities.

Accrued Expenses as of December 31, 2007 and 2006 consisted of accruals for:

IN THOUSANDS	2007		2006
Compensation and employee benefits	$	515,069	$	416,124
Deferred revenue and customer deposits		220,412		173,036
Rebates		141,195		125,715
Warranties		71,210		70,119
Current portion of pension and other postretirement benefit obligations		27,710		24,250
Current portion of affordable housing capital obligations		14,040		14,092
Preferred stock of subsidiaries and related accrued dividends		—		69,200
Other		352,181		294,990
	$	1,341,817	$	1,187,526

The changes in accrued warranties during 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007			2006			2005
Beginning balance	$	70,119		$	70,882		$	79,020
Charges		(51,443	)		(51,300	)		(52,258	)
Provision charged to expense		47,636			45,418			42,276
Acquisitions and divestitures		2,848			3,176			3,646
Foreign currency translation		2,050			1,943			(1,802	)
Ending balance	$	71,210		$	70,119		$	70,882

Illinois Tool Works Inc.     65

Long-Term Debt at December 31, 2007 and 2006 consisted of the following:

IN THOUSANDS	2007			2006
6.875% notes due November 15, 2008	$	149,984		$	149,966
5.75% notes due March 1, 2009		499,604			497,048
6.55% preferred debt securities due December 31, 2011		249,815			249,776
5.25% Euro notes due October 1, 2014		1,095,895			—
4.88% senior notes due December 31, 2020		38,819			49,448
Other borrowings		13,312			26,056
		2,047,429			972,294
Current maturities		(158,590	)		(16,684	)
	$	1,888,839		$	955,610

In 1998, the Company issued $150,000,000 of 6.875% notes at 99.228% of face value. The effective interest rate of the notes is 6.9%. The estimated market price of the notes exceeded the carrying value by approximately $3,136,000 at December 31, 2007 and $4,084,000 at December 31, 2006.

In 1999, the Company issued $500,000,000 of 5.75% redeemable notes at 99.281% of face value. The effective interest rate of the notes is 5.8%. The estimated market price of the notes exceeded the carrying value by approximately $9,746,000 at December 31, 2007 and $8,152,000 at December 31, 2006. In December 2002, the Company entered into an interest rate swap with a notional value of $100,000,000 to hedge a portion of the fixed-rate debt. Under the terms of the swap, the Company receives interest at a fixed rate of 5.75% and pays interest at a variable rate of LIBOR plus 1.96%. The variable interest rate under the swap was 7.08% at December 31, 2007 and 7.33% at December 31, 2006. The maturity date of the interest rate swap is March 1, 2009. The carrying value of the 5.75% notes has been adjusted to reflect the fair value of the interest rate swap.

In 2002, a subsidiary of the Company issued $250,000,000 of 6.55% preferred debt securities at 99.849% of face value. The effective interest rate of the preferred debt securities is 6.7%. The estimated fair value of the securities exceeded the carrying value by approximately $12,325,000 at December 31, 2007 and $12,342,000 at December 31, 2006.

In 2005, the Company issued $53,735,000 of 4.88% senior notes at 100% of face value. The estimated fair value of the notes exceeded the carrying value by approximately $443,000 at December 31, 2007 and was below the carrying value by approximately $633,000 at December 31, 2006.

In 2007, the Company entered into a $500,000,000 revolving credit facility with a termination date of June 15, 2012. No amounts were outstanding under this facility at December 31, 2007.

In 2007, the Company, through its wholly-owned subsidiary ITW Finance Europe S.A., issued €750,000,000 of 5.25% Euro notes due October 1, 2014, at 99.874% of face value. The effective interest rate of the notes is 5.27%. The estimated fair value of the notes exceeded the carrying value by approximately $23,410,000 at December 31, 2007.

The Company’s debt agreements’ financial covenants limit total debt, including guarantees, to 50% of total capitalization. The Company’s total debt, including guarantees, was 22% of total capitalization as of December 31, 2007, which was in compliance with these covenants.

Other debt outstanding at December 31, 2007, bears interest at rates ranging from 2.2% to 12.6%, with maturities through the year 2029.

Scheduled maturities of long-term debt for the years ending December 31 are as follows:

IN THOUSANDS
2009	$	506,981
2010		6,712
2011		255,836
2012		5,191
2013 and future years		1,114,119
	$	1,888,839

In connection with forming joint ventures, the Company has provided debt guarantees of $25,000,000 at December 31, 2007. The Company has recorded liabilities related to these guarantees of $17,000,000 at December 31, 2007.

At December 31, 2007, the Company had open stand-by letters of credit of $152,000,000, substantially all of which expire in 2008.

66     2007 Annual Report

Other Noncurrent Liabilities at December 31, 2007 and 2006 consisted of the following:

IN THOUSANDS	2007		2006
Postretirement benefit obligation	$	286,549	$	374,330
Pension benefit obligation		216,807		254,196
Noncurrent tax reserves		182,601		—
Affordable housing capital obligations		30,483		44,096
Other		348,315		338,956
	$	1,064,755	$	1,011,578

Commitments and Contingencies—The Company is subject to various legal proceedings and claims that arise in the ordinary course of business, including those involving environmental, product liability (including toxic tort) and general liability claims. The Company accrues for such liabilities when it is probable that future costs will be incurred and such costs can be reasonably estimated. Such accruals are based on developments to date, the Company’s estimates of the outcomes of these matters and its experience in contesting, litigating and settling other similar matters. The Company believes resolution of these matters, individually and in the aggregate, will not have a material adverse effect on the Company’s financial position, liquidity or future operations.

Among the toxic tort cases in which the Company is a defendant, the Company as well as its subsidiaries Hobart Brothers Company and Miller Electric Mfg. Co., have been named, along with numerous other defendants, in lawsuits alleging injury from exposure to welding consumables. The plaintiffs in these suits claim unspecified damages for injuries resulting from the plaintiffs’ alleged exposure to asbestos, manganese and/or toxic fumes in connection with the welding process. Based upon the Company’s experience in defending these claims, the Company believes that the resolution of these proceedings will not have a material adverse effect on the Company’s financial position, liquidity or future operations. The Company has not recorded any significant reserves related to these cases.

The Company has an estimated potential liability for European transfer taxes of up to approximately $42 million plus possible interest and penalties related to legal entity reorganizations. The ultimate resolution of this liability will be dependent upon the determination of whether or not such transfers are deemed to have occurred and whether such taxes are applicable to transfers that occurred outside of Europe. No reserves have been recorded for this matter as of December 31, 2007.

Preferred Stock, without par value, of which 300,000 shares are authorized, is issuable in series. The Board of Directors is authorized to fix by resolution the designation and characteristics of each series of preferred stock. The Company has no present commitment to issue its preferred stock.

Illinois Tool Works Inc.     67

Common Stock, with a par value of $.01, Additional Paid-In-Capital and Common Stock Held in Treasury transactions during 2007, 2006 and 2005 are shown below. On May 5, 2006, the stockholders approved an amendment to the Restated Certificate of Incorporation changing the number of authorized shares of common stock from 350,000,000 shares to 700,000,000 shares in order to affect a two-for-one split of the Company’s common stock, with a distribution date of May 25, 2006, at a rate of one additional share for each common share held by stockholders of record on May 18, 2006.

							ADDITIONAL
	COMMON STOCK						PAID-IN-CAPITAL			COMMON STOCK HELD IN TREASURY
IN THOUSANDS EXCEPT SHARES	SHARES			AMOUNT			AMOUNT			SHARES			AMOUNT
Balance, December 31, 2004		311,373,558		$	3,114		$	978,941			(19,145,194	)	$	(1,731,378	)
During 2005—
Shares issued for stock options		850,033			8			37,858			—			—
Shares surrendered on exercise of stock options and vesting of restricted stock		(148,642	)		(2	)		(13,302	)		—			—
Stock compensation expense		—			—			64,144			—			—
Tax benefits related to stock options and restricted stock		—			—			12,879			—			—
Restricted stock forfeitures		(31,660	)		—			—			—			—
Tax benefits related to defined contribution plans		—			—			2,091			—			—
Repurchases of common stock		—			—			—			(12,084,527	)		(1,041,798	)
Balance, December 31, 2005		312,043,289			3,120			1,082,611			(31,229,721	)		(2,773,176	)
During 2006—
Adjustment to reflect May 2006 stock split		312,043,289			3,151			(3,151	)		(31,229,721	)		—
Shares issued for stock options		3,096,786			19			85,033			—			—
Shares surrendered on exercise of stock options and vesting of restricted stock		(125,568	)		—			(6,082	)		—			—
Stock compensation expense		—			—			34,781			—			—
Tax benefits related to stock options and restricted stock		—			—			13,086			—			—
Restricted stock forfeitures		(10,610	)		—			—			—			—
Tax benefits related to defined contribution plans		—			—			8,944			—			—
Shares issued for acquisitions		3,853,556			19			163,365			(11,011	)		(486	)
Repurchases of common stock		—			—			—			(9,680,731	)		(446,876	)
Balance, December 31, 2006		630,900,742			6,309			1,378,587			(72,151,184	)		(3,220,538	)
During 2007—
Retirement of treasury shares		(72,151,184	)		(721	)		(1,378,587	)		72,151,184			3,220,538
Shares issued for stock options		3,768,417			37			116,736			—			—
Shares surrendered on exercise of stock options		(1,950	)		—			(108	)		—			—
Shares issued for stock grant		6,001						310			—			—
Stock compensation expense		—			—			30,471			—			—
Tax benefits related to stock options		—			—			16,212			—			—
Tax benefits related to defined contribution plans		—			—			9,989			—			—
Repurchases of common stock		—			—			—			(32,425,297	)		(1,757,761	)
Balance, December 31, 2007		562,522,026		$	5,625		$	173,610			(32,425,297	)	$	(1,757,761	)
Authorized, December 31, 2007		700,000,000

On August 20, 2007, the Company’s Board of Directors authorized a new stock repurchase program, which provides for the buyback of up to $3,000,000,000 of the Company’s common stock over an open-ended period of time. Through December 31, 2007, the Company had repurchased 7,106,028 shares of its common stock for $388,348,000 at an average price of $54.65 per share.

On August 4, 2006, the Company’s Board of Directors authorized a stock repurchase program, which provided for the buyback of up to 35,000,000 shares. This program was completed in November 2007.

On April 19, 2004, the Company’s Board of Directors authorized a stock repurchase program, which provided for the buyback of up to 31,000,000 shares (on a pre-split basis) and which was completed in 2005.

Cash Dividends declared were $0.98 per share in 2007, $0.75 per share in 2006 and $0.61 per share in 2005. Cash dividends paid were $0.91 per share in 2007, $0.705 per share in 2006 and $0.585 per share in 2005.

68     2007 Annual Report

Accumulated Other Comprehensive Income—Comprehensive income is defined as the changes in equity during a period from transactions and other events and circumstances from non-owner sources. It includes all changes in equity during a period except those resulting from investments by stockholders and distributions to stockholders. The changes in accumulated other comprehensive income during 2007, 2006 and 2005 were as follows:

IN THOUSANDS	2007		2006			2005
Beginning balance	$	446,639	$	122,012		$	413,415
Foreign currency translation adjustments		424,037		495,697			(296,248	)
Minimum pension liability, net of tax of $5,683 in 2006 and $(205) in 2005		—		8,967			4,845
Adjustment to initially apply SFAS 158, net of tax of $133,713		—		(180,037	)		—
Pension and other postretirement benefits actuarial gains, net of tax of $89,207		167,146		—			—
Amortization of unrecognized pension and other postretirement benefits costs, net of tax of $15,562		10,467		—			—
Pension and other postretirement benefits settlements, curtailments and other, net of tax of $3,586		2,497		—			—
Ending balance	$	1,050,786	$	446,639		$	122,012

As of December 31, 2007 and 2006, the ending balance of accumulated comprehensive income consisted of cumulative translation adjustment income of $1,071,169,000 and $647,132,000, respectively, and unrecognized pension and other postretirement benefits costs of $20,383,000 and $200,493,000, respectively. The estimated unrecognized benefit cost that will be amortized from accumulated other comprehensive income into net periodic benefit cost in 2008 is $235,000 for pension and $5,251,000 for other postretirement benefits.

Stock-Based Compensation—Stock options and restricted stock have been issued to officers and other management employees under ITW’s 1996 and 2006 Stock Incentive Plans. The stock options generally vest over a four-year period and have a maturity of ten years from the issuance date. Restricted stock generally vests over a three-year period. Currently, there are no restricted shares granted under the plan that have not vested. On February 9, 2007, the Company granted 6,001 shares of non-restricted Common Stock awards to its non-employee directors. To cover the exercise of vested options and non-restricted Common Stock awards, the Company generally issues new shares from its authorized but unissued share pool. At December 31, 2007, 65,251,366 shares of ITW common stock were reserved for issuance under this plan. Option exercise prices are equal to the common stock fair market value on the date of grant.

The Company records compensation expense for the fair value of stock awards over the remaining service periods of those awards.

The following summarizes the Company’s stock-based compensation expense:

IN THOUSANDS	2007			2006			2005
Pretax compensation expense	$	30,781		$	34,781		$	64,144
Tax benefit		(8,803	)		(10,310	)		(17,588	)
Total stock-based compensation recorded as expense, net of tax	$	21,978		$	24,471		$	46,556

The following summarizes stock option activity under the Plan as of December 31, 2007, and changes during the year then ended:

						WEIGHTED-AVERAGE
	NUMBER			WEIGHTED-AVERAGE		REMAINING	AGGREGATE INTRINSIC
OPTIONS	OF SHARES			EXERCISE PRICE		CONTRACTUAL TERM	VALUE
Under option, January 1, 2007		20,893,461		$	36.07
Granted		3,707,762			51.61
Exercised		(3,775,154	)		31.03
Cancelled or expired		(190,274	)		44.78
Under option, December 31, 2007		20,635,795			39.70	5.86 years	$	285,582,712
Exercisable, December 31, 2007		14,697,884			36.13	4.77 years	$	255,879,107

On February 8, 2008, the Compensation Committee of the Board of Directors approved an option grant of 3,995,750 shares at an exercise price of $48.51 per share. The estimated fair value of the options granted during 2008, 2007 and 2006 were calculated using a binomial option pricing model. The following summarizes the assumptions used in the models:

	2008			2007			2006
Risk-free interest rate		1.9-3.9	%		4.7-5.1	%		4.5-4.7	%
Weighted-average volatility		27.0	%		22.0	%		23.0	%
Dividend yield		1.96	%		1.65	%		1.3	%
Expected years until exercise		7.3-7.9			6.7-7.0			4.2-6.7

Illinois Tool Works Inc.     69

Lattice-based option valuation models, such as the binomial option pricing model, incorporate ranges of assumptions for inputs. The risk-free rate of interest for periods within the contractual life of the option is based on a zero-coupon U.S. government instrument over the contractual term of the equity instrument. Expected volatility is based on implied volatility from traded options on the Company’s stock and historical volatility of the Company’s stock. The Company uses historical data to estimate option exercise timing and employee termination rates within the valuation model. Separate groups of employees that have similar historical exercise behavior are considered separately for valuation purposes. The expected term of options granted is derived from the output of the option valuation model and represents the period of time that options granted are expected to be outstanding. The ranges presented result from separate groups of employees assumed to exhibit different behavior.

The weighted-average grant-date fair value of options granted during 2008, 2007 and 2006 was $13.32, $14.37 and $11.87 per share, respectively. The aggregate intrinsic value of options exercised during the years ended December 31, 2007, 2006 and 2005, was $86,253,000, $63,255,000 and $36,754,000, respectively. Exercise of options during the years ended December 31, 2007, 2006 and 2005, resulted in cash receipts of $116,665,000, $78,969,000 and $24,563,000, respectively. As of December 31, 2007, there was $60,609,000 of total unrecognized compensation cost related to non-vested equity awards. That cost is expected to be recognized over a weighted-average period of 2.6 years. The total fair value of options vested during the years ended December 31, 2007 and 2006, was $20,841,000 and $35,505,000, respectively.

Segment Information—The Company has approximately 825 operations in 52 countries. During 2007, the Company changed its internal management reporting. These 825 businesses are internally reported as 60 operating segments to senior management. The Company’s 60 operating segments have been aggregated into the following eight reportable segments for external purposes: Industrial Packaging; Power Systems & Electronics; Transportation; Construction Products; Food Equipment; Decorative Surfaces; Polymers & Fluids; and All Other.

In 2006 and 2005, the Company’s operations were aggregated and organized into the following four segments: Engineered Products—North America; Engineered Products—International; Specialty Systems—North America; and Specialty Systems—International. The segment information provided for 2006 and 2005 has been restated to conform to the new segment presentation.

Industrial Packaging - Steel, plastic and paper products used for bundling, shipping and protecting transported goods.

Power Systems & Electronics - Equipment and consumables associated with specialty power conversion, metallurgy and electronics.

Transportation - Components, fasteners, fluids and polymers for transportation-related applications.

Construction Products - Tools, fasteners and other products for construction applications.

Food Equipment - Commercial food equipment and related service.

Decorative Surfaces - Decorative surfacing materials for countertops, flooring, furniture and other applications.

Polymers & Fluids - Adhesives, sealants, lubrication and cutting fluids, and janitorial and sanitation supplies.

All Other - All other operating segments.

70     2007 Annual Report

Segment information for 2007, 2006 and 2005 was as follows:

IN THOUSANDS	2007			2006			2005
Operating revenues:
Industrial Packaging	$	2,400,832		$	2,164,822		$	2,097,903
Power Systems & Electronics		2,245,514			1,847,926			1,492,554
Transportation		2,215,497			1,961,502			1,913,281
Construction Products		2,064,477			1,897,690			1,726,591
Food Equipment		1,930,281			1,520,990			1,483,676
Decorative Surfaces		1,239,190			1,004,003			939,757
Polymers & Fluids		1,001,952			762,230			677,038
All Other		3,119,523			2,699,147			2,258,694
Intersegment revenues		(46,655	)		(59,315	)		(49,134	)
	$	16,170,611		$	13,798,995		$	12,540,360
Operating income:
Industrial Packaging	$	301,731		$	276,789		$	249,573
Power Systems & Electronics		451,660			408,308			310,856
Transportation		375,853			339,159			325,574
Construction Products		285,860			259,616			262,510
Food Equipment		307,437			281,248			235,390
Decorative Surfaces		155,670			157,152			153,485
Polymers & Fluids		172,065			133,420			115,303
All Other		573,480			529,722			462,539
	$	2,623,756		$	2,385,414		$	2,115,230
Depreciation and amortization and impairment of goodwill and intangible assets:
Industrial Packaging	$	62,308		$	57,868		$	57,094
Power Systems & Electronics		48,604			37,984			28,739
Transportation		87,330			72,912			74,486
Construction Products		79,636			80,433			57,514
Food Equipment		34,806			27,179			22,578
Decorative Surfaces		29,252			22,729			21,232
Polymers & Fluids		35,914			22,190			19,877
All Other		146,894			122,611			101,554
	$	524,744		$	443,906		$	383,074
Plant and equipment additions:
Industrial Packaging	$	59,206		$	28,129		$	38,707
Power Systems & Electronics		38,101			29,639			20,707
Transportation		75,524			67,752			52,079
Construction Products		40,141			50,167			56,580
Food Equipment		33,733			22,585			25,478
Decorative Surfaces		20,621			19,533			22,259
Polymers & Fluids		15,849			9,631			7,571
All Other		70,180			73,570			69,721
	$	353,355		$	301,006		$	293,102
Identifiable assets:
Industrial Packaging	$	1,865,356		$	1,695,389		$	1,465,357
Power Systems & Electronics		1,279,390			1,189,321			748,995
Transportation		1,758,535			1,552,934			1,387,959
Construction Products		1,584,253			1,473,591			1,080,155
Food Equipment		1,084,595			693,903			646,864
Decorative Surfaces		503,295			384,826			367,470
Polymers & Fluids		1,157,439			949,794			794,787
All Other		3,351,980			3,348,231			2,479,308
Corporate		2,941,019			2,592,450			2,474,748
	$	15,525,862		$	13,880,439		$	11,445,643

Illinois Tool Works Inc.     71

Identifiable assets by segment are those assets that are specifically used in that segment. Corporate assets are principally cash and equivalents, investments and other general corporate assets.

Enterprise-wide information for 2007, 2006 and 2005 was as follows:

IN THOUSANDS	2007		2006		2005
Operating Revenues by Geographic Region:
United States	$	7,229,318	$	6,913,621	$	6,753,983
Europe		5,310,681		3,933,405		3,653,959
Asia		1,419,880		1,063,128		810,141
Other North America		1,020,111		932,140		500,453
Australia/New Zealand		728,293		601,384		614,459
Other		462,328		355,317		207,365
	$	16,170,611	$	13,798,995	$	12,540,360

Operating revenues by geographic region are based on the customers’ location.

The Company has thousands of product lines within its 825 businesses therefore providing operating revenues by product line is not practicable.

Total noncurrent assets excluding deferred tax assets and financial instruments were $8,842,000,000 and $8,011,000,000 at December 31, 2007 and 2006, respectively. Of these amounts, approximately 53% and 56% was attributed to U.S. operations for 2007 and 2006, respectively. The remaining amounts were attributed to the Company’s foreign operations, with no single country accounting for a significant portion.

72     2007 Annual Report

Quarterly and Common Stock Data

Quarterly Financial Data (Unaudited)

	THREE MONTHS ENDED
IN THOUSANDS	MARCH 31				JUNE 30				SEPTEMBER 30				DECEMBER 31
EXCEPT PER SHARE AMOUNTS	2007		2006		2007		2006		2007		2006		2007		2006
Operating revenues	$	3,716,641	$	3,239,187	$	4,136,836	$	3,515,474	$	4,073,004	$	3,473,885	$	4,244,130	$	3,570,449
Cost of revenues		2,413,010		2,075,618		2,657,405		2,244,560		2,625,923		2,244,910		2,758,847		2,321,802
Operating income		568,477		533,650		695,596		652,014		693,948		617,256		665,735		582,494
Net income		402,435		366,530		505,606		465,854		491,088		446,092		470,733		439,270
Net income per share:
Basic		.72		.65		.91		.82		.89		.79		.87		.78
Diluted		.71		.65		.90		.81		.89		.78		.87		.77

Prior quarterly periods have been restated to reflect discontinued operations.

Common Stock Price and Dividend Data—The common stock of Illinois Tool Works Inc. is listed on the New York Stock Exchange and the Chicago Stock Exchange. Quarterly market price and dividend data for 2007 and 2006 were as shown below:

		MARKET PRICE PER SHARE			DIVIDENDS DECLARED
	HIGH		LOW		PER SHARE
2007:
Fourth quarter	$	60.00	$	51.41	$	.28
Third quarter		60.00		50.58		.28
Second quarter		56.70		50.51		.21
First quarter		53.65		45.60		.21
2006:
Fourth quarter	$	50.11	$	44.32	$	.21
Third quarter		48.00		42.23		.21
Second quarter		53.54		46.31		.165
First quarter		49.38		41.54		.165

The approximate number of holders of record of common stock as of February 1, 2008 was 11,402. This number does not include beneficial owners of the Company’s securities held in the name of nominees.

Illinois Tool Works Inc.     73

EX-21

Exhibit 21

ILLINOIS TOOL WORKS INC.

Subsidiaries and Affiliates

January 2008

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
9055-1599 Quebec Inc.	Indirect		100.00	%	Quebec
A 3 Sud S.r.l.	Indirect		100.00	%	Italy
AB Sjötofta Tråddrageri	Indirect		100.00	%	Sweden
Accu-Lube Manufacturing GmbH	Direct		50.10	%	Germany
Airhammer s.r.o.	Indirect		100.00	%	Czech Republic
Airhammer-Haubold s.r.o	Indirect		100.00	%	Czech Republic
Alfamacchine 2 s.r.l.	Indirect		100.00	%	Italy
Allegis Corporation Ltd.	Indirect		100.00	%	United Kingdom
Allen France SAS	Direct		49.00	%	France
Alpes Froid Grande Cuisine SAS	Indirect		100.00	%	France
Alpine Automation Limited	Indirect		100.00	%	United Kingdom
Alpine Holdings, Inc.	Indirect		100.00	%	Delaware
Alpine Systems Corporation	Indirect		100.00	%	Canada
Ameri-Cad Inc.	Indirect		100.00	%	Texas
Anaerobicos do Brasil Adesivos Ltda.	Indirect		100.00	%	Brazil
Anaerobicos S.A.	Indirect		100.00	%	Argentina
Anahol S.A.	Indirect		100.00	%	Argentina
Appleton Investments II L.L.C.	Indirect		100.00	%	Delaware
Appleton Investments L.L.C.	Indirect		100.00	%	Delaware
Applied Australia Pty Ltd	Indirect		100.00	%	Australia
ApS Strapex Omsnoringsmaskiner	Indirect		100.00	%	Denmark
Ark-Les Components S.A. de C.V.	Indirect		100.00	%	Mexico
Atlantic Mills, Inc.	Direct		100.00	%	New Jersey
Avery Berkel France SAS	Indirect		100.00	%	France
AXA Power ApS	Indirect		100.00	%	Denmark
B.C. Immo S.C.I.	Indirect		100.00	%	France
Bates Cargo-Pak ApS	Indirect		100.00	%	Denmark
Bei Si Ya (Shanghai) Trade Co., Ltd. (aka PCI Shanghai/Pacific Concept Shanghai)	Indirect		100.00	%	China
Berrington (UK)	Indirect		100.00	%	United Kingdom
Betterway Ventures Co., Ltd.	Indirect		100.00	%	British Virgin Island
Binks	Indirect		100.00	%	United Kingdom
Bonnet Grande Cuisine SAS	Indirect		100.00	%	France
Bonnet UK Limited	Indirect		100.00	%	United Kingdom
Bonnet-Thirode Belgium BVBA	Indirect		100.00	%	Belgium
Buehler GmbH	Indirect		100.00	%	Germany
Buehler Ltd.	Direct		100.00	%	Illinois
Buell Industries, Inc.	Indirect		100.00	%	Delaware
Burseryds Bruk AB	Indirect		100.00	%	Sweden
Cal-Sensors, Inc.	Direct		100.00	%	California
Capital Ventures (Australasia) S.à r.l	Indirect		100.00	%	Luxembourg
Celcor Ltd.	Indirect		100.00	%	Ontario
CER Foils SAS	Indirect		100.00	%	France
CER SAS	Indirect		100.00	%	France
Cetram Pty. Limited	Indirect		100.00	%	Australia
CFC Europe (UK) Limited	Direct		100.00	%	United Kingdom

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
CFC Europe GmbH	Indirect		100.00	%	Germany
CFC International (Europe) GmbH	Indirect		100.00	%	Germany
Chapas Y Herrajes Eternos, S.A. de C.V.	Indirect		100.00	%	Mexico
Cheer Bright Ltd.	Indirect		10.59	%	British Virgin Island
Chris Kay (UK) Limited	Indirect		100.00	%	United Kingdom
Chris Kay Limited	Indirect		100.00	%	Ireland
CKFE Limited	Indirect		100.00	%	Hong Kong
Clarén Kemi AS	Indirect		100.00	%	Norway
Cleanman Cleaning Devices Ltd.	Indirect		100.00	%	Taiwan
Click Commerce, Inc.	Direct		100.00	%	Delaware
Click Procure, Ltd.	Indirect		100.00	%	United Kingdom
CLK Kemi AB	Indirect		100.00	%	Sweden
Cofiva s.r.l.	Indirect		100.00	%	Italy
Comercial Quimisol, S.A.	Indirect		100.00	%	Spain
Comercializadora West Bend S.A. de C.V.	Indirect		100.00	%	Mexico
Compagnie de Matériel et d’Equipements Techniques — COMET SAS	Direct & Indirect		100.00	%	France
Compagnie Hobart S.A.S.	Indirect		100.00	%	France
Constructions Isothermiques Bontami SAS	Indirect		100.00	%	France
Corporación Coral S.A. de C.V.	Indirect		100.00	%	Mexico
CS (Australasia) Limited	Indirect		100.00	%	Bermuda
CS (Australia) Pty Limited	Indirect		100.00	%	Australia
CS (Europe) Holdings Ltd.	Indirect		100.00	%	Bermuda
CS (Far East) Holdings Ltd.	Indirect		100.00	%	Bermuda
CS (Finance) Europe S.a.r.l.	Indirect		100.00	%	Luxembourg
CS (Global) Holdings Ltd.	Indirect		100.00	%	Bermuda
CS Financing I LLC	Indirect		100.00	%	Delaware
CS Packaging Corporation Ltd.	Indirect		100.00	%	British Virgin Island
CS PMI Holdings Inc.	Indirect		100.00	%	Delaware
CSTS L.L.C.	Direct		100.00	%	Delaware
Cumberland Leasing Co.	Indirect		100.00	%	Illinois
Cyclone Industries Pty Ltd	Indirect		100.00	%	Australia
Dacro B.V.	Indirect		100.00	%	Netherlands
DaeLim Placo Company, Ltd.	Indirect		100.00	%	South Korea
DaeLim Plastic Industrial Company, Ltd.	Indirect		100.00	%	South Korea
D’Arnaud B.V.	Indirect		100.00	%	Netherlands
D-Clean profi, s.r.o.	Indirect		100.00	%	Czech Republic
Decorative Sleeves Limited	Indirect		100.00	%	United Kingdom
Densit (USA) Inc.	Indirect		100.00	%	Ohio
Densit Asia Pacific Sdn. Bhd.	Indirect		100.00	%	Malaysia
Densit, A/S	Indirect		100.00	%	Denmark
Deutsche Capital Solutions GmbH	Indirect		100.00	%	Germany
Devcon Limited	Indirect		100.00	%	Ireland
DeVilbiss Company Limited, The	Indirect		100.00	%	United Kingdom
DeVilbiss Equipamentos para Pintura Industrial Ltda.	Direct		100.00	%	Brazil
DeVilbiss Europa Unterstuetzungskasse GmbH	Indirect		100.00	%	Germany
DeVilbiss Ransburg de Mexico S.A. de C. V.	Direct & Indirect		100.00	%	Mexico
DGFC Inc.	Indirect		100.00	%	Delaware
DHP (Thailand) Limited	Direct & Indirect		100.00	%	Thailand
DHP Co., Ltd.	Indirect		100.00	%	South Korea
Diagraph Corporation Sdn. Bhd	Direct		100.00	%	Malaysia
Diagraph ITW Mexico, S. de R.L. De C.V.	Indirect		100.00	%	Mexico
Diagraph Mexico, S.A. de C.V.	Direct		100.00	%	Mexico

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
Distribuidora de Productos Sebring, S.A. de C.V.	Indirect		100.00	%	Mexico
Dongguan Ark-Les Electric Components Co., Ltd.	Indirect		100.00	%	China
Dongguan CK Branding Co., Ltd.	Indirect		100.00	%	China
Dorbyl U.K. (Holdings) Limited	Indirect		100.00	%	United Kingdom
Duo-Fast Corporation	Direct		100.00	%	Illinois
Duo-Fast de Espana S.A.	Indirect		100.00	%	Spain
Duo-Fast Korea Co. Ltd.	Indirect		49.00	%	South Korea
E.C.S. d.o.o.	Indirect		100.00	%	Croatia
EDS Belgium N.V.	Indirect		100.00	%	Belgium
Elance Software Technology Private Ltd.	Indirect		100.00	%	India
Electric Light Development Ltd.	Indirect		100.00	%	British Virgin Island
Elga AB	Indirect		100.00	%	Sweden
Elga Skandinavian AS	Indirect		100.00	%	Norway
Elisphere Sarl	Indirect		50.00	%	France
Eltex-Elektrostatik-GmbH	Indirect		100.00	%	Germany
Emballages Diffusion Service	Indirect		80.00	%	France
Empaques Sultana, S. de R.L. de C.V.	Indirect		100.00	%	Mexico
Endra B.V.	Indirect		100.00	%	Netherlands
Envases Multipac, S.A. de C.V.	Direct		49.00	%	Mexico
Envopak Group	Indirect		100.00	%	United Kingdom
Epirez Australia Pty Ltd	Indirect		100.00	%	Australia
Equipamentos Cientificos Instron Ltda.	Indirect		100.00	%	Brazil
Eserre Corporation	Direct		100.00	%	California
Essem Sarl	Indirect		100.00	%	France
EucoDensit LLC	Indirect		40.00	%	Ohio
Eurofoil Limited	Indirect		100.00	%	United Kingdom
Euromere SAS	Indirect		100.00	%	France
Europolymere	Indirect		100.00	%	France
Eurotec s.r.l.	Indirect		100.00	%	Italy
Exportadora Lerma SA	Indirect		100.00	%	Mexico
Falcon Leasing Systems Ltd.	Direct		51.00	%	Bermuda
Farmadan AS	Indirect		100.00	%	Norway
FEG Investments L.L.C.	Indirect		100.00	%	Delaware
Fellowell Holdings Co. Ltd.	Direct & Indirect		100.00	%	Thailand
Filtertek B.V.	Indirect		100.00	%	Netherlands
Filtertek De Mexico de C.V.	Indirect		100.00	%	Mexico
Filtertek De Mexico Holding Inc.	Indirect		100.00	%	Delaware
Filtertek do Brazil Industria E Commercio Ltda.	Indirect		100.00	%	Brazil
Filtertek GmbH	Indirect		100.00	%	Germany
Filtertek Inc.	Direct		100.00	%	Delaware
Filtertek S.A.	Indirect		100.00	%	France
Flejes MISA, S. de R.L. de C.V.	Indirect		100.00	%	Mexico
Forkardt Deutschland GmbH	Indirect		100.00	%	Germany
Forkardt France SAS	Indirect		100.00	%	France
Forkardt International Limited	Indirect		100.00	%	United Kingdom
Forkardt Schweiz AG	Indirect		100.00	%	Switzerland
Forte Administration Limited	Indirect		100.00	%	United Kingdom
Forte Lubricants Limited	Indirect		100.00	%	United Kingdom
Foster Canada Inc.	Indirect		100.00	%	Canada
Foster Refrigerator (U.K.)	Indirect		100.00	%	United Kingdom
Foster Refrigerator France S.A.S.	Indirect		100.00	%	France
Franklynn Industries U.K. Ltd.	Indirect		100.00	%	Ohio
Franklynn Industries, Inc.	Direct		100.00	%	Ohio
Fuseon Graphics Limited	Indirect		100.00	%	United Kingdom
GC Financement SA	Indirect		50.00	%	France
GSE Holdings Inc.	Indirect		100.00	%	Delaware

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
H.A. Springer marine + industrie service GmbH	Indirect		100.00	%	Germany
Hallrank	Indirect		100.00	%	United Kingdom
Haubold Befestigungstechnik GmbH	Indirect		100.00	%	Germany
Haubold Paslode GmbH	Indirect		100.00	%	Switzerland
Haubold Properties s.r.o	Indirect		100.00	%	Czech Republic
Haubold-Kihlberg bvba	Indirect		100.00	%	Belgium
Haubold-Kihlberg GmbH	Indirect		100.00	%	Austria
Heat-Seal (Textiles) Ltd.	Indirect		100.00	%	United Kingdom
Heatseal Designs Limited	Indirect		100.00	%	United Kingdom
Heger Belgium BVBA	Indirect		100.00	%	Belgium
Heger GmbH European Diamond Tools	Indirect		100.00	%	Germany
Heger Holland B.V	Indirect		100.00	%	Netherlands
Heikaus Verpackungenssysteme GmbH	Indirect		100.00	%	Germany
High Mind International Offshore Ltd.	Indirect		100.00	%	British Virgin Island
Highland Champ Corporation	Indirect		100.00	%	British Virgin Island
Higiene Integral Medioambiental, S.L	Indirect		100.00	%	Spain
HMI (GB) Limited	Indirect		100.00	%	United Kingdom
HMI Grande Cuisine SA	Indirect		100.00	%	France
Hobart (Japan) K.K.	Indirect		100.00	%	Japan
Hobart Andina S.A.	Indirect		100.00	%	Colombia
Hobart Argentina S.A.	Indirect		100.00	%	Argentina
Hobart Brothers (International) AG	Indirect		100.00	%	Switzerland
Hobart Brothers Company	Direct		100.00	%	Ohio
Hobart Brothers International Limitada	Indirect		100.00	%	Chile
Hobart Canada Corp.	Indirect		100.00	%	Canada
Hobart Corporation	Indirect		100.00	%	Delaware
Hobart Dayton Mexicana S.A. de C.V.	Indirect		100.00	%	Mexico
Hobart do Brasil Ltd.	Indirect		100.00	%	Brazil
Hobart Food Equipment Co. Ltd.	Indirect		100.00	%	China
Hobart Foster (South Africa) Pty. Ltd.	Indirect		100.00	%	South Africa
Hobart Foster Belgium B.V.B.A.	Indirect		100.00	%	Belgium
Hobart Foster Holland B.V.	Indirect		100.00	%	Netherlands
Hobart Foster International GmbH	Indirect		100.00	%	Germany
Hobart Foster Scandinavia ApS	Indirect		100.00	%	Denmark
Hobart Foster Techniek B.V.	Indirect		100.00	%	Netherlands
Hobart Gesellschaft mit beschränkter Haftung	Indirect		100.00	%	Germany
Hobart International (Singapore) Pte. Ltd.	Indirect		100.00	%	Singapore
Hobart International (South Asia), Inc.	Indirect		100.00	%	Delaware
Hobart Korea Co. Ltd.	Indirect		100.00	%	South Korea
Hobart Manufacturing Company Limited, The	Indirect		100.00	%	Canada
Hobart Manufacturing Company, The	Indirect		100.00	%	United Kingdom
Hobart Sales & Service, Inc.	Indirect		100.00	%	Ohio
Hôpital Services Systemes S.A.S.	Indirect		100.00	%	France
Horis SA	Indirect		100.00	%	France
Horis Services SNC	Indirect		100.00	%	France
Houchin Aerospace	Indirect		100.00	%	United Kingdom
Hwa Meir Packing Daily Commodities Co., Ltd.	Indirect		100.00	%	China
I.T.W. Inc.	Direct		100.00	%	Illinois
I.W.D. Strapping Sales Pty. Ltd.	Indirect		100.00	%	Australia
Ice Freeze de Mexico, S.A. de C.V.	Indirect		100.00	%	Mexico
Illinois Tool Works (ITW) Nederland B.V.	Indirect		100.00	%	Netherlands
Illinois Tool Works Norway AS	Indirect		100.00	%	Norway
Immobiliere — Services — Industries — Isis SNC	Indirect		100.00	%	France

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
Indiana Pickling and Processing Company	Direct		35.00	%	Indiana
Industrias Concepto del Pacifico Guatemala S.A.	Indirect		100.00	%	Guatemala
Industrias Quimicas Kimsa, S.L.	Indirect		100.00	%	Spain
Inmobillaria Cit., S.A. de C.F.	Direct		49.00	%	Mexico
Innova Temperlite 1200, S.A. de C.V.	Indirect		100.00	%	Mexico
Innova Temperlite Servicios, S.A. de C.V.	Indirect		100.00	%	Mexico
Instron	Indirect		100.00	%	United Kingdom
Instron (Hong Kong) Pte Limited	Direct		100.00	%	Hong Kong
Instron (Shanghai) Experiment Equipment Trade Co., Ltd.	Indirect		100.00	%	China
Instron (Thailand) Limited	Indirect		100.00	%	Thailand
Instron Canada Inc.	Direct		100.00	%	Canada
Instron Deutschland GmbH	Indirect		100.00	%	Germany
Instron Foreign Sales Corp. Limited	Direct		100.00	%	Jamaica
Instron Holdings Limited	Indirect		100.00	%	United Kingdom
Instron India Private Limited	Indirect		100.00	%	India
Instron International Limited	Indirect		100.00	%	United Kingdom
Instron Japan Company, Ltd.	Direct		100.00	%	Massachusetts
Instron Korea Co., Ltd.	Indirect		100.00	%	South Korea
Instron Proprietary Limited	Indirect		100.00	%	Australia
Instron S.A.S.	Indirect		100.00	%	France
Instron Singapore Pte Limited	Indirect		100.00	%	Singapore
Instron Structural Testing Systems GmbH	Indirect		100.00	%	Germany
Instron Structural Testing Systems Limited	Indirect		100.00	%	United Kingdom
Instron Testing Systems (M) SDN. BHD.	Direct		100.00	%	Malaysia
International Leasing Company	Indirect		100.00	%	Delaware
Interstrap B.V.	Indirect		100.00	%	Netherlands
IPHC LLC	Indirect		100.00	%	Delaware
IQ Algorithms Limited	Direct		100.00	%	New Zealand
Irathane Limited	Indirect		100.00	%	United Kingdom
IST Enterprises Limited	Indirect		100.00	%	United Kingdom
ITW (Deutschland) GmbH	Indirect		100.00	%	Germany
ITW (EU) Holdings Ltd.	Indirect		100.00	%	Bermuda
ITW (Europe) GmbH	Indirect		100.00	%	Germany
ITW (Malaysian) Holdings Company Ltd.	Indirect		100.00	%	Bermuda
ITW Acmor (Shanghai) Company Limited	Indirect		100.00	%	China
ITW Administration GmbH	Indirect		100.00	%	Germany
ITW AEP LLC	Direct		100.00	%	Delaware
ITW AFC Pty Limited	Indirect		100.00	%	Australia
ITW Aircraft Investments Inc.	Indirect		100.00	%	Delaware
ITW Alpha Sárl	Indirect		100.00	%	Luxembourg
ITW Ampang Industries Philippines, Inc.	Direct		100.00	%	Philippines
ITW Angleboard AB	Indirect		100.00	%	Sweden
ITW Ark-Les Corporation	Direct		100.00	%	Massachusetts
ITW Asia (Private) Limited	Direct		100.00	%	Singapore
ITW Australia Pty. Ltd.	Indirect		100.00	%	Australia
ITW Austria Vertriebs GmbH	Indirect		100.00	%	Austria
ITW Automotive Components & Fasteners Japan K.K.	Indirect		100.00	%	Japan
ITW Automotive Fasteners (Shanghai) Co., Ltd.	Indirect		100.00	%	China
ITW Automotive Italia s.r.l.	Indirect		100.00	%	Italy
ITW Automotive Products GmbH & Co. K.G.	Indirect		100.00	%	Germany
ITW Automotive Products Verwaltungs GmbH	Indirect		100.00	%	Germany
ITW Bailly Comte S.A.S.	Indirect		100.00	%	France
ITW Befestigungssysteme GmbH	Indirect		100.00	%	Germany

Company Name	Ownership Type (a)	Percentage			Primarly Jurisdiction
ITW Belgium S.p.r.l.	Indirect		100.00	%	Belgium
ITW Beta Sárl	Indirect		100.00	%	Luxembourg
ITW Bevestigingssystemen B.V.	Indirect		100.00	%	Netherlands
ITW Brazilian Nominee L.L.C.	Indirect		100.00	%	Delaware
ITW Building Components Group Inc.	Direct		100.00	%	Delaware
ITW Bulgaria EOOD	Indirect		100.00	%	Bulgaria
ITW Canada	Indirect		100.00	%	Ontario
ITW Canada Holdings Company	Indirect		100.00	%	Nova Scotia
ITW Canada Management Company/Compagnie Gestion	Indirect		100.00	%	Nova Scotia
ITW Cayman	Indirect		100.00	%	Cayman Islands
ITW Chemical Products Ltda	Indirect		100.00	%	Brazil
ITW Chemical Products Scandinavia ApS	Indirect		100.00	%	Denmark
ITW Chemishe Produkte GmbH & Co. KG	Indirect		100.00	%	Germany
ITW Construction Products (Suzhou) Co. Ltd.	Direct		100.00	%	China
ITW Construction Products ApS	Indirect		100.00	%	Denmark
ITW Construction Products CR, s.r.o.	Indirect		100.00	%	Czech Republic
ITW Construction Products Espana S.A.	Indirect		100.00	%	Spain
ITW Construction Products Italy s.r.l.	Indirect		100.00	%	Italy
ITW Construction Systems Australia Pty Ltd	Indirect		100.00	%	Australia
ITW Contamination Control (Wujiang) Company Limited	Indirect		100.00	%	China
ITW Covid Security Group Inc.	Direct		100.00	%	Delaware
ITW CP Distribution Center Holland BV	Indirect		100.00	%	Netherlands
ITW CPM S.A.S.	Indirect		100.00	%	France
ITW Cupids LLC	Indirect		100.00	%	Delaware
ITW Cupids, L.P.	Indirect		100.00	%	Delaware
ITW de France S.A.S.	Indirect		100.00	%	France
ITW DelFast do Brasil Ltda.	Direct & Indirect		100.00	%	Brazil
ITW Delta Sárl	Indirect		100.00	%	Luxembourg
ITW Denmark ApS	Indirect		100.00	%	Denmark
ITW Devcon Industrial Products GmbH	Indirect		100.00	%	Germany
ITW do Brazil Industrial e Comercial Ltda.	Direct		100.00	%	Brazil
ITW Domestic Finance II Inc.	Indirect		100.00	%	Delaware
ITW Domestic Holdings Inc.	Indirect		100.00	%	Delaware
ITW D-Tech Holdings GmbH	Indirect		100.00	%	Germany
ITW Dynatec (Hong Kong) Limited	Direct		50.00	%	Hong Kong
ITW Dynatec GmbH	Indirect		100.00	%	Germany
ITW Dynatec Kabushiki Kaisha	Direct		100.00	%	Japan
ITW Dynatec Singapore Pte. Ltd.	Direct		50.00	%	Singapore
ITW Dynatec Thailand Ltd.	Direct		20.00	%	Thailand
ITW Electronic Business Asia Co., Limited	Direct		100.00	%	Taiwan
ITW Electronic Component Manufacturing Company d.o.o.	Indirect		100.00	%	Slovenia
ITW Electronic Components/Products (Shanghai) Company Limited	Indirect		100.00	%	China
ITW Electronic Packaging (Malta) Ltd.	Indirect		100.00	%	Malta
ITW Epsilon Sárl	Indirect		100.00	%	Luxembourg
ITW Espana S.A.	Indirect		100.00	%	Spain
ITW European Participations LLC	Indirect		100.00	%	Delaware
ITW Fastex de Argentina S.A.	Indirect		100.00	%	Argentina
ITW Fastex France S.A.S.	Indirect		100.00	%	France
ITW FEG Hong Kong Limited	Indirect		100.00	%	Hong Kong
ITW Finance Europe SA	Direct		100.00	%	Luxembourg
ITW Finance II L.L.C.	Direct & Indirect		100.00	%	Delaware
ITW Finishing Equipment (Shanghai) Co., Ltd.	Indirect		100.00	%	China
ITW Finishing L.L.C	Indirect		100.00	%	Delaware

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
ITW Fluid Handling Equipment (Suzhou) Co., Ltd.	Indirect		100.00	%	China
ITW Foils	Indirect		100.00	%	France
ITW Foils B.V.	Indirect		100.00	%	Netherlands
ITW Foils Srl	Indirect		100.00	%	Italy
ITW Foils, S.L.	Indirect		100.00	%	Spain
ITW Food Equipment Group LLC	Indirect		100.00	%	Delaware
ITW Gamma Sárl	Indirect		100.00	%	Luxembourg
ITW Gema (Shanghai) Co Ltd	Indirect		100.00	%	China
ITW Gema AG	Indirect		100.00	%	Switzerland
ITW Gema s.r.l.	Indirect		100.00	%	Italy
ITW Global Investments Inc.	Indirect		100.00	%	Delaware
ITW Graphics France Sarl	Indirect		100.00	%	France
ITW Great Britain Investment & Licensing Holding Company	Indirect		100.00	%	Delaware
ITW Group European Finance Company Ltd.	Indirect		100.00	%	Bermuda
ITW Group France	Indirect		100.00	%	France
ITW Gunther S.A.S.	Indirect		100.00	%	France
ITW Heller GmbH	Indirect		100.00	%	Germany
ITW Henschel GmbH	Indirect		100.00	%	Germany
ITW Hi-Cone Japan Limited	Direct		100.00	%	Japan
ITW HLP Thailand Co. Ltd.	Direct & Indirect		100.00	%	Thailand
ITW Holding Química B.C., S.L.	Indirect		100.00	%	Spain
ITW Holdings Pty. Ltd.	Indirect		100.00	%	Australia
ITW Holdings UK	Indirect		100.00	%	United Kingdom
ITW Hospitality Products Pty Limited	Indirect		100.00	%	Australia
ITW Idle Facilities L.L.C.	Indirect		100.00	%	Delaware
ITW ILC Holdings I Inc.	Indirect		100.00	%	Delaware
ITW ILC Holdings II Inc.	Indirect		100.00	%	Delaware
ITW Imaden Industria e Comercio Ltda.	Direct & Indirect		100.00	%	Brazil
ITW India Limited	Direct		96.70	%	India
ITW Industrial Components s.r.l.	Indirect		100.00	%	Italy
ITW Industrial Packaging Australia Pty Ltd	Indirect		100.00	%	Australia
ITW Industrial Products Trading (Shanghai) Co., Ltd.	Indirect		100.00	%	China
ITW Industry Co., Ltd.	Indirect		100.00	%	Japan
ITW Industry SAS	Indirect		100.00	%	France
ITW International Finance S.A.S.	Indirect		100.00	%	France
ITW International Holdings LLC	Indirect		100.00	%	Delaware
ITW Investment GmbH	Indirect		100.00	%	Germany
ITW Investments Limited	Indirect		100.00	%	United Kingdom
ITW Ireland	Indirect		100.00	%	Ireland
ITW Ireland Holdings	Indirect		100.00	%	Ireland
ITW Ispracontrols Bulgaria EOOD	Indirect		100.00	%	Bulgaria
ITW Italy Finance Srl	Indirect		100.00	%	Italy
ITW Italy Holding S.r.l.	Indirect		100.00	%	Italy
ITW Limited	Indirect		100.00	%	United Kingdom
ITW Litec France S.A.S.	Indirect		100.00	%	France
ITW Lombard Holdings Inc.	Indirect		100.00	%	Delaware
ITW Ltd. Storbritannien Filal Sverige	Indirect		100.00	%	Sweden
ITW Meritex (Singapore) Pte. Ltd.	Indirect		100.00	%	Singapore
ITW Meritex Sdn. Bhd.	Direct		100.00	%	Malaysia
ITW Metal Fasteners, S.L.	Indirect		100.00	%	Spain
ITW Metalflex, družba za proizvodnjo delov za gospodinjske aparate, d.o.o. TOLMIN	Indirect		100.00	%	Slovenia
ITW Mexico Holding Inc.	Indirect		100.00	%	Delaware

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
ITW México, S. de R.L. de C.V.	Direct & Indirect		100.00	%	Mexico
ITW Mima Films L.L.C.	Indirect		100.00	%	Delaware
ITW Mima Holdings L.L.C.	Indirect		100.00	%	Delaware
ITW Mima Systems S.A.S.	Indirect		100.00	%	France
ITW Minigrip (Thailand) Co., Ltd.	Direct & Indirect		100.00	%	Thailand
ITW Morlock GmbH	Indirect		100.00	%	Germany
ITW Mortgage Investments I, Inc.	Indirect		100.00	%	Delaware
ITW Mortgage Investments II, Inc.	Indirect		100.00	%	Delaware
ITW Mortgage Investments III, Inc.	Indirect		100.00	%	Delaware
ITW Mortgage Investments IV, Inc.	Indirect		100.00	%	Delaware
ITW New Zealand Limited	Indirect		100.00	%	New Zealand
ITW Nominees Limited	Indirect		100.00	%	New Zealand
ITW Novadan ApS	Indirect		100.00	%	Denmark
ITW Oberflaechentechnik GmbH & Co. K.G.	Indirect		100.00	%	Germany
ITW Operations Australia Pty. Ltd.	Indirect		100.00	%	Australia
ITW P&F Holdings Pty. Ltd.	Indirect		100.00	%	Australia
ITW Packaging (Malaysia) Sdn Bhd	Indirect		100.00	%	Malaysia
ITW Packaging (Shanghai) Limited	Indirect		100.00	%	China
ITW Packaging Systems Group GmbH	Indirect		100.00	%	Germany
ITW Packaging Systems OOO	Indirect		100.00	%	Russia
ITW Paris E.U.R.L.	Indirect		100.00	%	France
ITW Participations S.à r.l.	Indirect		100.00	%	Luxembourg
ITW Pension Funds Trustee Company	Indirect		100.00	%	United Kingdom
ITW Performance Polymers & Fluids OOO	Indirect		100.00	%	Russia
ITW Performance Polymers (Wujiang) Co., Ltd.	Indirect		100.00	%	China
ITW Performance Polymers and Fluids Pte. Ltd.	Indirect		100.00	%	Singapore
ITW Philippines Holdings LLC	Direct		100.00	%	Delaware
ITW Philippines, Inc.	Indirect		100.00	%	Philippines
ITW PMI Investments, Inc.	Indirect		100.00	%	Delaware
ITW Poly Mex, S.A. de C.V.	Direct & Indirect		100.00	%	Mexico
ITW Poly Recycling GmbH	Indirect		100.00	%	Switzerland
ITW Pronovia Plus s.r.o.	Indirect		100.00	%	Czech Republic
ITW Proynovia s.r.o.	Indirect		100.00	%	Czech Republic
ITW Reyflex France SAS	Indirect		100.00	%	France
ITW Reid Holdings Pty Ltd	Indirect		100.00	%	Australia
ITW Residuals III L.L.C.	Indirect		100.00	%	Delaware
ITW Residuals IV L.L.C.	Indirect		100.00	%	Delaware
ITW Richmond Sdn. Bhd.	Indirect		100.00	%	Malaysia
ITW Rivex S.A.S.	Indirect		100.00	%	France
ITW Servicios, S. de R.L. de C.V.	Indirect		100.00	%	Mexico
ITW Shippers S.p.r.l.	Indirect		100.00	%	Belgium
ITW Siewer Automotiv s.r.o	Indirect		100.00	%	Czech Republic
ITW Siewer Jarmutechnikai Bt	Indirect		100.00	%	Hungary
ITW Siewer Vagyonkezelo Kft	Indirect		100.00	%	Hungary
ITW Signode Australasia Pty. Limited	Indirect		100.00	%	Australia
ITW Signode Holding GmbH	Indirect		100.00	%	Germany
ITW Signode Polska Sp. z.o.o.	Indirect		100.00	%	Poland
ITW Singapore (Pte) Ltd.	Direct		100.00	%	Singapore
ITW SMPI S.A.S.	Indirect		100.00	%	France
ITW SP Europe S.a.r.l.	Indirect		100.00	%	Luxembourg
ITW Spain Holdings, S.L.	Indirect		100.00	%	Spain
ITW Specialty Film Co. Ltd.	Indirect		100.00	%	South Korea
ITW Specialty Films France	Indirect		100.00	%	France
ITW Spraytec	Indirect		100.00	%	France

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
ITW Strapping (Shenyang) Company Limited	Indirect		100.00	%	China
ITW Superannuation Fund 2 Pty. Ltd.	Indirect		100.00	%	Australia
ITW Surfaces & Finitions S.A.S.	Indirect		100.00	%	France
ITW Sverige AB	Indirect		100.00	%	Sweden
ITW Sweden Holding AB	Indirect		100.00	%	Sweden
ITW Syn-Tex México. S.A. de C.V.	Indirect		100.00	%	Mexico
ITW Syn-Tex Service México. S.A. de C.V.	Indirect		100.00	%	Mexico
ITW Tech Spray L.L.C.	Direct		100.00	%	Delaware
ITW Test & Measurement (Shanghai) Co. Ltd.	Indirect		100.00	%	China
ITW Thermal Films Italy Srl	Indirect		100.00	%	Italy
ITW Tiede Non-Destructive Testing GmbH	Indirect		100.00	%	Germany
ITW UK	Indirect		100.00	%	United Kingdom
ITW Universal L.L.C.	Direct		100.00	%	Delaware
ITW V.A.C. B.V.	Indirect		100.00	%	Netherlands
ITW Welding Products B.V.	Indirect		100.00	%	Netherlands
ITW Welding Products Group S.A. de C.V.	Indirect		100.00	%	Mexico
ITW Welding Products Italy Srl	Indirect		100.00	%	Italy
ITW Welding S.A.S.	Indirect		100.00	%	France
ITW Welding Singapore Pte. Ltd.	Indirect		100.00	%	Singapore
James Briggs	Indirect		100.00	%	United Kingdom
James Briggs Holdings	Indirect		100.00	%	United Kingdom
Japan Polymark Co. Ltd.	Indirect		40.00	%	Japan
Jemco de Mexico, S.A. de C.V.	Direct & Indirect		100.00	%	Mexico
Josef Kihlberg AB	Indirect		100.00	%	Sweden
Josef Kihlberg AS	Indirect		100.00	%	Norway
Josef Kihlberg Ltd.	Indirect		100.00	%	United Kingdom
Josef Kihlberg of America, Inc.	Direct		100.00	%	New York
Kartro Balti OU	Indirect		100.00	%	Estonia
KB Sektionen 1	Indirect		100.00	%	Sweden
KCPL Holdings Private Limited	Indirect		100.00	%	Singapore
KCPL Mauritius Holdings	Indirect		100.00	%	Mauritius
Kester Asia Holdings, Inc.	Indirect		100.00	%	Delaware
Kester Canada Inc.	Indirect		100.00	%	Quebec
Kester Components (M) Sdn. Bhd.	Indirect		100.00	%	Malaysia
Kester Components Private Limited	Indirect		100.00	%	Singapore
Kester Electronic Materials (Suzhou) Co., Ltd.	Indirect		100.00	%	China
Kester GmbH	Indirect		100.00	%	Germany
Kester Metais do Brasil-Indústria e Comércio de Produtos
Electrônicos Ltda.	Indirect		100.00	%	Brazil
Kester, Inc.	Indirect		100.00	%	Delaware
Kitazawa Sangyo Co., Ltd.	Indirect		1.00	%	Japan
Kiwiplan Asia Sdn Bhd	Indirect		100.00	%	Malaysia
Kiwiplan Europe Limited	Indirect		100.00	%	United Kingdom
Kiwiplan GmbH	Indirect		100.00	%	Germany
Kiwiplan NZ Limited	Direct		100.00	%	New Zealand
Kiwiplan, Inc.	Indirect		100.00	%	Ohio
Kleinmann GmbH	Indirect		100.00	%	Germany
Kotka Professional — Sak Oy	Indirect		100.00	%	Finland
KP Comercio e Industria de Productos Para Automoveis e Lubrificantes, S.A.	Indirect		100.00	%	Portugal
Krafft Argentina, S.A.	Indirect		80.00	%	Argentina
Krafft, S.L.	Indirect		100.00	%	Spain
Lachenmeier ApS	Indirect		100.00	%	Denmark
Lachenmeier UK Limited	Indirect		100.00	%	United Kingdom

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
Lachenmeier, Inc.	Direct		100.00	%	Florida
Lajota S.A.	Indirect		100.00	%	Argentina
Lebo, S.A.	Indirect		100.00	%	Spain
Liljendals Bruk AB	Indirect		100.00	%	Finland
Loma International, Inc.	Direct		100.00	%	Illinois
Loma Systems (Canada) Inc.	Indirect		100.00	%	Canada
Loma Systems sro	Indirect		100.00	%	Czech Republic
Lombard Pressings Limited	Indirect		100.00	%	United Kingdom
Loveshaw Corporation, The	Indirect		100.00	%	Delaware
LSPS Inc.	Indirect		100.00	%	Delaware
Lumex, Inc.	Direct		100.00	%	Illinois
Lys Fusion Poland Sp. z.o.o.	Indirect		100.00	%	Poland
M&C Specialties (Ireland) Limited	Indirect		100.00	%	Ireland
M&C Specialties (Shenzhen) Co. Ltd.	Indirect		100.00	%	China
M&C Specialties (Tianjin) Co. Ltd.	Indirect		100.00	%	China
M&C Specialties Co.	Direct		100.00	%	Pennsylvania
M&C Specialties Company HK Limited	Indirect		100.00	%	Hong Kong
M.P.S. Metal Plastik Sanayi Cember ve Paketleme Sistemleri Imalat ve Ticaret A.S.	Indirect		50.00	%	Turkey
Magna Industrial Co. Limited	Indirect		100.00	%	Hong Kong
Magnaflux Limited	Indirect		100.00	%	United Kingdom
Manufacturing Avancee S.A.	Indirect		100.00	%	Morocco
Maquilas y Componentes Industriales, I S.A. de C.V.	Indirect		100.00	%	Mexico
Marescol SA	Indirect		48.00	%	France
Marvil Mexicana S.A. de C.V.	Indirect		100.00	%	Mexico
Mbelish.com Limited	Indirect		100.00	%	United Kingdom
MBM France S.A.S.	Indirect		100.00	%	France
Mecafaster	Indirect		50.00	%	France
Meritex Technology (Suzhou) Co. Ltd.	Direct		100.00	%	China
Metales Industrializados S.A. de C.V.	Indirect		100.00	%	Mexico
Metro Sport International Limited	Indirect		100.00	%	United Kingdom
Metro Sport Limited	Indirect		100.00	%	United Kingdom
Metropolitan Oils (Proprietary) Limited	Indirect		100.00	%	South Africa
Meyercord Revenue Inc.	Direct		100.00	%	Delaware
Mezger Heftsysteme Verwaltungsgesellschaft mbH	Indirect		100.00	%	Germany
Miller Beijing Electric Manufacturing Co. Ltd.	Indirect		100.00	%	China
Miller Electric Mfg. Co.	Indirect		100.00	%	Wisconsin
Miller Insurance Ltd.	Indirect		100.00	%	Bermuda
Mima Films L.L.C.	Indirect		100.00	%	Delaware
Mima Films S.a.r.l.	Indirect		100.00	%	Luxembourg
Mima Films Sprl	Indirect		100.00	%	Belgium
Minigrip Limited	Indirect		100.00	%	United Kingdom
Modern Maintenance Products International	Indirect		100.00	%	United Kingdom
Morgan Polimer Seals, S. de R.L. de C.V.	Direct & Indirect		100.00	%	Mexico
Morgan Polymers Seals, L.L.C.	Direct		100.00	%	California
Nail-Web Limited	Indirect		100.00	%	United Kingdom
New West Products, Inc.	Direct		100.00	%	California
Norden Czech s.r.o.	Indirect		100.00	%	Czech Republic
NorDen Holding Hadsund A/S	Indirect		100.00	%	Denmark
Norden Olje AB	Indirect		100.00	%	Sweden
NorDen Olje ApS	Indirect		100.00	%	Denmark
Norden Olje AS	Indirect		100.00	%	Norway
Norden Sp. Z.o.o. Polen	Indirect		100.00	%	Poland
Nordic SAS	Indirect		100.00	%	France
Nordisk Kartro AB	Indirect		100.00	%	Sweden

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
Nordisk Kartro AS	Indirect		100.00	%	Norway
Norsk Signode AS	Indirect		100.00	%	Norway
Novadan AS	Indirect		100.00	%	Norway
Novadan Sp. Z.o.o.	Indirect		100.00	%	Poland
Noza Holdings Pty. Ltd.	Indirect		100.00	%	Australia
NSC Europe Limited	Direct		100.00	%	United Kingdom
NuTrus LLC	Direct		50.00	%	Delaware
NYCO-KRAFFT, S.A.	Indirect		50.00	%	Spain
Odesign, Inc.	Direct		100.00	%	Illinois
Optum, BV	Indirect		100.00	%	Netherlands
Orama Fabrications	Indirect		100.00	%	United Kingdom
Orama Holdings	Indirect		100.00	%	United Kingdom
Orama Trustees Limited	Indirect		100.00	%	United Kingdom
Orbitalum Tools GmbH	Indirect		100.00	%	Germany
Orgapack GmbH	Indirect		100.00	%	Switzerland
OY Josef Kihlberg AB	Indirect		100.00	%	Finland
Oy Kartro AB	Indirect		100.00	%	Finland
Oy M. Haloila AB	Indirect		100.00	%	Finland
Pacific Concept Industries (USA) LLC	Direct		100.00	%	Delaware
Pacific Concept Industries Limited	Indirect		100.00	%	Hong Kong
Pacific Concept Industries Limited	Indirect		100.00	%	United Kingdom
Pacific Concept Industries Limited (Enping)	Indirect		100.00	%	China
Pacific Concept Industries Tekstil Sanayi Ve Dis Ticaret Limited Sirketi	Indirect		100.00	%	Turkey
Pacific Concept Italy S.R.L.	Indirect		100.00	%	Italy
Pacific Concept Korea Co., Ltd.	Indirect		100.00	%	South Korea
Pacific Concepts Industries B.V.	Indirect		100.00	%	Netherlands
Pacific Concepts Industries S.L	Indirect		100.00	%	Spain
Packaging Leasing Systems Inc.	Direct		51.00	%	Delaware
PanCon GmbH	Indirect		100.00	%	Germany
Paradym Investments Ltd.	Indirect		100.00	%	Bermuda
Paslode Duo-Fast Industry Benelux BV	Indirect		100.00	%	Netherlands
Paslode Fasteners (Shanghai) Co. Ltd.	Indirect		100.00	%	China
Paul Forkardt Inc.	Indirect		100.00	%	Delaware
Perlite Products Sdn. Bhd	Indirect		100.00	%	Malaysia
Permatex Canada, Inc.	Direct		100.00	%	Ontario
Perron SAS	Indirect		34.21	%	France
Plásticos Iberotec SL	Indirect		100.00	%	Spain
PMI Food Equipment Group (Malaysia), Inc.	Indirect		100.00	%	Delaware
PMI Food Equipment Group Canada Inc.	Indirect		100.00	%	Ontario
Polimeros Morgan, S. de R.L. de C.V.	Direct & Indirect		100.00	%	Mexico
Polymark Export Limited	Direct		100.00	%	United Kingdom
Polyrey (UK) Limited	Indirect		100.00	%	United Kingdom
Polyrey Benelux N. Vis. A. SA	Indirect		100.00	%	Belgium
Polyrey Deutschland GmbH	Indirect		100.00	%	Germany
Polyrey Iberica SL	Indirect		100.00	%	Spain
Polyrey S.A.S.	Indirect		100.00	%	France
Premark FEG Beteiligungsgesellschaft m.b.H.	Indirect		100.00	%	Germany
Premark FEG L.L.C.	Indirect		100.00	%	Delaware
Premark HII Holdings, Inc.	Indirect		100.00	%	Ohio
Premark International Holdings B.V.	Indirect		100.00	%	Netherlands
Premark International, L.L.C	Indirect		100.00	%	Delaware
Premark N.V.	Indirect		100.00	%	Netherland Antilles
Premark RWP Holdings, Inc.	Indirect		100.00	%	Delaware

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
Premark Verwaltungs GmbH	Indirect		100.00	%	Germany
Prokem, S.A.	Indirect		100.00	%	Spain
Prolex, Sociedad Anónima	Indirect		100.00	%	Costa Rica
Pryda (Indonesia) Pty Ltd	Indirect		100.00	%	Australia
Pryda (Malaysia) Sdn Bhd	Indirect		100.00	%	Malaysia
Pryda (Thailand) Co., Ltd.	Indirect		100.00	%	Thailand
PT Pryda Indonesia	Indirect		100.00	%	Indonesia
PT2 Holdings Inc.	Indirect		100.00	%	Delaware
PTX de Mexico, S.A. de C.V.	Indirect		100.00	%	Mexico
Quandel Verpackungsund Forderanlagen GmbH	Indirect		100.00	%	Germany
Quantum Marketing, Inc.	Direct		100.00	%	Florida
Quimica Industrial Mediterranea, S.A.	Indirect		100.00	%	Spain
Quimica Tecnica, S.A.	Indirect		100.00	%	Spain
Quimica TF, S.A. de C.V.	Direct & Indirect		100.00	%	Mexico
Racor, Incorporated	Direct		100.00	%	Idaho
Ramset Fasteners (Hong Kong) Ltd.	Indirect		100.00	%	Hong Kong
Ransburg Industrial Finishing K.K.	Indirect		100.00	%	Japan
Ransburg Manufacturing Corporation	Direct		100.00	%	Indiana
Ransburg-Gema UK Limited	Indirect		100.00	%	United Kingdom
Redfish Photonics, Inc.	Indirect		100.00	%	Delaware
Reid Construction Systems Pty. Ltd.	Indirect		100.00	%	Australia
Requisite Technology Canada, Inc.	Indirect		100.00	%	New Brunswick
Requisite Technology Limited	Indirect		100.00	%	United Kingdom
Resopal GmbH	Indirect		100.00	%	Germany
Resopal-Unterstutzungseinrichtung GmbH in Grob-Umstadt	Indirect		100.00	%	Germany
Reydet Plastique Inc.	Indirect		100.00	%	Canada
Rippey Technology Private Limited	Indirect		100.00	%	Singapore
Rockwell Hardness Testers Limited	Indirect		100.00	%	United Kingdom
Rocol	Indirect		100.00	%	United Kingdom
Rocol Far East Limited	Indirect		100.00	%	Hong Kong
Rocol Korea Limited	Indirect		100.00	%	South Korea
Rocol Site Safety Systems	Indirect		100.00	%	United Kingdom
Sam Jung Signode Inc.	Indirect		100.00	%	South Korea
Sarsfield N.V.	Indirect		100.00	%	Netherland Antilles
SCANTECH Finland Oi	Indirect		100.00	%	Finland
SCANTECH Holding AB	Indirect		100.00	%	Sweden
SCANTECH Norge A/S	Indirect		100.00	%	Norway
SCANTECH Sverige AB	Indirect		100.00	%	Sweden
SCANTECH Tools AB	Indirect		100.00	%	Sweden
Schnee-Morehead, Inc.	Direct		100.00	%	Texas
Scybele S.A.S.	Indirect		100.00	%	France
Semaj Nelg Pty Ltd	Indirect		100.00	%	Australia
Service GmbH	Indirect		100.00	%	Germany
Servicios de Reynosa, S.A. de C.V.	Indirect		100.00	%	Mexico
Severn Furnaces Limited	Indirect		100.00	%	United Kingdom
SG Invest Holdings GmbH	Indirect		100.00	%	Germany
Shanghai ITW Plastic & Metal Company Limited	Indirect		93.00	%	China
Sherman Treaters	Indirect		100.00	%	United Kingdom
Siddons Ramset Holdings Pty Limited	Indirect		100.00	%	Australia
Signode (Thailand) Limited	Direct		100.00	%	Thailand
Signode AB	Indirect		100.00	%	Sweden
Signode Brasileria Ltda.	Direct & Indirect		100.00	%	Brazil
Signode BVBA	Indirect		100.00	%	Belgium

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
Signode ErÇem Çemberleme Sanayi ve Ticaret Anonim Şirketi	Indirect		100.00	%	Turkey
Signode Hong Kong Limited	Indirect		100.00	%	Hong Kong
Signode Ireland Limited	Indirect		100.00	%	United Kingdom
Signode Kabushiki Kaisha	Indirect		100.00	%	Japan
Signode México, S. de R.L. de C.V.	Direct & Indirect		100.00	%	Mexico
Signode Packaging Systems Limited	Direct		20.00	%	Kenya
Signode Service GmbH	Indirect		100.00	%	Germany
Signode Singapore Investments Pte. Ltd.	Indirect		100.00	%	Singapore
Signode Singapore Pte. Ltd.	Indirect		100.00	%	Singapore
Signode System GmbH	Indirect		100.00	%	Germany
Simco (Nederland) B.V.	Indirect		100.00	%	Netherlands
Simco Japan, Inc.	Indirect		100.00	%	Japan
Sisvend Soluciones de Seguridad, S.L.	Indirect		40.00	%	Spain
Smart Home Products Pty Ltd	Indirect		100.00	%	Australia
Sn Investors, Inc.	Direct		100.00	%	Delaware
Société Civile Immobilière des Baquets	Indirect		100.00	%	France
Société Civile Immobilière Rousseau Ivry	Indirect		100.00	%	France
Societe de Constructions Elbeuvienne de Materiels our L’Alimentation SAS	Indirect		100.00	%	France
Solutions Group Transaction Subsidiary Inc.	Indirect		100.00	%	Delaware
Spectrum Inspection Services BV	Indirect		100.00	%	Netherlands
Spectrum Inspection Services Limited	Indirect		100.00	%	United Kingdom
Speedline Holdings I, Inc.	Indirect		100.00	%	Delaware
Speedline Holdings I, L.L.C.	Direct		100.00	%	Delaware
Speedline Technologies Asia Pte. Ltd.	Indirect		100.00	%	Singapore
Speedline Technologies GmbH	Indirect		100.00	%	Germany
Speedline Technologies Mexico Services, S. de R.L. de C.V.	Indirect		100.00	%	Mexico
Speedline Technologies Mexico, S. de R.L. de C.V.	Indirect		100.00	%	Mexico
Speedline Technologies, Inc.	Indirect		100.00	%	Delaware
SPID Argentina Srl	Indirect		100.00	%	Argentina
SPIT S.A.S. (Societe de Prospection et d’Inventions Techniques S.A.S.)	Indirect		100.00	%	France
SPL Group Ltd.	Indirect		100.00	%	Australia
Spray Nine Canada Ltd.	Indirect		100.00	%	Canada
Spray Nine Corporation	Direct		100.00	%	New York
Sraennik Pty Ltd	Indirect		100.00	%	Australia
SS OMG Holding Limited	Direct		50.00	%	British Virgin Island
St. Jude Polymer Corp.	Direct		100.00	%	Pennsylvania
Steelfast Asia Sdn Bhd	Indirect		100.00	%	Malaysia
Strapex (Canada) Corporation	Indirect		100.00	%	Nova Scotia
Strapex Embalagem L.d.a.	Indirect		100.00	%	Portugal
Strapex GmbH	Indirect		100.00	%	Switzerland
Strapex GmbH	Indirect		100.00	%	Austria
Strapex GmbH	Indirect		100.00	%	Germany
Strapex Holding GmbH	Indirect		100.00	%	Switzerland
Strapex Nederland B.V.	Indirect		100.00	%	Netherlands
Strapex Packaging India Limited	Indirect		100.00	%	India
Strapex S.A.S.	Indirect		100.00	%	France
Strapex S.p.r.l.	Indirect		100.00	%	Belgium
Strapex s.r.l.	Indirect		100.00	%	Italy
Strapex U.K.	Indirect		100.00	%	United Kingdom
Strategic Holdings L.L.C.	Indirect		100.00	%	Delaware
Sunrise Arkansas, Inc.	Direct		100.00	%	Arkansas
Supreme Plastics	Indirect		100.00	%	United Kingdom
Supreme Plastics Holdings	Indirect		100.00	%	United Kingdom
SysPack do Brasil Participações Ltda.	Indirect		100.00	%	Brazil

Company Name	Ownership Type (a)	Percentage			Primary Jurisdiction
SysPack Indústria e Comércio de Sistemas de Embalagens Industriais Ltda.	Indirect		100.00	%	Brazil
TAG Staples Sdn Bhd	Indirect		100.00	%	Malaysia
Tarutin Kester Co., Ltd.	Indirect		100.00	%	Japan
Technographics UK	Indirect		100.00	%	United Kingdom
Tecnoquimica Integral, S.L.	Indirect		100.00	%	Spain
Ten Plus S.A.S.	Indirect		100.00	%	France
Texwipe Philippines, Inc.	Direct		100.00	%	Philippines
The Three Russells, Sociedad Anónima	Indirect		100.00	%	Costa Rica
Thirode Grandes Cuisines Poligny SAS	Indirect		100.00	%	France
Tien Tai Electrode (Kun Shan) Co., Ltd.	Indirect		100.00	%	China
Tien Tai Electrode Co., Ltd.	Direct		100.00	%	Taiwan
Trallom Limited	Indirect		100.00	%	United Kingdom
Tribol Limited	Indirect		100.00	%	United Kingdom
Trilectron Europe Limited	Indirect		100.00	%	United Kingdom
Troy Investments I L.L.C.	Indirect		100.00	%	Delaware
Truswal Systems Limited	Indirect		100.00	%	United Kingdom
Twinaplate Limited	Indirect		100.00	%	United Kingdom
Unichemicals Industria E Comercio Ltda.	Indirect		100.00	%	Brazil
Unipac Corporation	Indirect		100.00	%	Nova Scotia
Unipac Limited	Indirect		100.00	%	United Kingdom
Valeron Strength Films B.V.B.A.	Indirect		100.00	%	Belgium
Varybond Chemie AG	Indirect		100.00	%	Switzerland
Varybond Chemie Holding AG	Indirect		100.00	%	Liechtenstein
Varybond Chemie-Gesellschaft mbH	Indirect		100.00	%	Austria
Veneta Decalcogomme s.r.l.	Indirect		100.00	%	Italy
Versachem UK	Indirect		100.00	%	United Kingdom
Vulcan-Hart Canada Corp.	Indirect		100.00	%	Canada
Welding Industries Limited	Indirect		100.00	%	Australia
Welding Products Group FZE	Indirect		100.00	%	UAE -Dubai
West Bend de Mexico S.A. de C.V.	Indirect		100.00	%	Mexico
Wilsonart (Shanghai) Co. Ltd.	Indirect		100.00	%	China
Wilsonart (Thailand) Co. Ltd.	Direct & Indirect		100.00	%	Thailand
Wilsonart Holdings Limited	Indirect		100.00	%	United Kingdom
Wilsonart International, Inc.	Indirect		100.00	%	Delaware
Wilsonart Limited	Indirect		100.00	%	United Kingdom
Wilsonart Taiwan Corp. Ltd.	Indirect		100.00	%	Taiwan
Wuxi Signode Sekisui Jushi Strapping Co., Ltd.	Indirect		100.00	%	China
Wynn Oil (South Africa) (Pty) Ltd.	Indirect		100.00	%	South Africa
Wynn Oil (UK)	Indirect		100.00	%	United Kingdom
Wynn Oil Holdings BV	Indirect		100.00	%	Netherlands
Wynn’s Australia Pty Ltd	Indirect		100.00	%	Australia
Wynn’s Belgium BVBA	Indirect		100.00	%	Belgium
Wynn’s Canada Ltd.	Indirect		100.00	%	Canada
Wynn’s Deutschland GmbH	Indirect		100.00	%	Germany
Wynn’s France Automotive SAS	Indirect		100.00	%	France
Wynn’s Friction Proofing Mexico	Indirect		100.00	%	Mexico
Wynn’s Italia Srl	Indirect		100.00	%	Italy
Wynn’s Mekuba India Pvt Ltd	Indirect		51.00	%	India
Wynn’s Nederland BV	Indirect		100.00	%	Netherlands
Xelus SARL	Indirect		100.00	%	France
Xelus, Ltd.	Indirect		100.00	%	United Kingdom
Zip-Pak International B.V.	Indirect		100.00	%	Netherlands
Zip-Pak Japan Company Limited	Direct		60.00	%	Japan

(a) Ownership type indicates whether each subsidiary or affiliate is directly owned by Illinois Tool Works Inc., indirectly owned by a subsidiary of Illinois Tool Works Inc., or a combination thereof.

EX-23

Exhibit 23

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

We consent to the incorporation by reference in the previously filed Registration Statements of Illinois Tool Works Inc. on Form S-8 (File No.’s 333-105731, 333-108088, 333-69542, 333-142627 and 333-145392), Form S-4 (File No.’s 333-02671, 333-25471 and 333-88801), Form S-3 (File No.’s 33-5780 and 333-70691) and the previously filed Registration Statements of Premark International, Inc. on Form S-3 (File No.’s 33-35137 and 333-62105) of our report dated February 27, 2008, relating to the financial statements of Illinois Tool Works Inc. and Subsidiaries, and the effectiveness of Illinois Tool Works Inc.’s internal control over financial reporting, incorporated by reference in the Annual Report on Form 10-K of Illinois Tool Works Inc. for the year ended December 31, 2007.

/s/ DELOITTE & TOUCHE LLP

Chicago, Illinois
February 27, 2008

EX-24

Exhibit 24

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 11th day of February, 2008.

/s/ William F. Aldinger  

William F. Aldinger 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 14th day of February, 2008.

/s/ Michael J. Birck  

Michael J. Birck 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 15th day of February, 2008.

/s/ Marvin D. Brailsford  

Marvin D. Brailsford 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 23rd day of February, 2008.

/s/ Susan Crown  

Susan Crown 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 18th day of February, 2008.

/s/ Don H. Davis, Jr.  

Don H. Davis, Jr. 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 15th day of February, 2008.

/s/ Robert C. McCormack  

Robert C. McCormack 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 14th day of February, 2008.

/s/ Robert S. Morrison  

Robert S. Morrison 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 19th day of February, 2008.

/s/ James A. Skinner  

James A. Skinner 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 21st day of February, 2008.

/s/ Harold B. Smith  

Harold B. Smith 

ILLINOIS TOOL WORKS INC.

Form 10-K Annual Report

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS, that the undersigned whose signature appears below constitutes and appoints David B. Speer and James H. Wooten, Jr., and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution for her or him and in his or her name, place and stead, in any and all capacities, to sign the Company’s Form 10-K Annual Report and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

IN WITNESS WHEREOF, the undersigned has executed this power of attorney this 15th day of February, 2008.

/s/ Pamela B. Strobel  

Pamela B. Strobel 

EX-31

Exhibit 31

Rule 13a-14(a) Certification

I, David B. Speer, certify that:

1.	I have reviewed this report on Form 10-K of Illinois Tool Works Inc.;
2.	Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3.	Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4.	The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a)	designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
b)	designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
c)	evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
d)	disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of the annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a)	all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b)	any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Dated: February 27, 2008	/s/ David B. Speer
	David B. Speer
	Chairman and Chief Executive Officer

Exhibit 31

Rule 13a-14(a) Certification

I, Ronald D. Kropp, certify that:

1.	I have reviewed this report on Form 10-K of Illinois Tool Works Inc.;
2.	Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3.	Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4.	The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a)	designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
b)	designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
c)	evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
d)	disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of the annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a)	all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b)	any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Dated: February 27, 2008	/s/ Ronald D. Kropp
	Ronald D. Kropp
	Senior Vice President and Chief Financial Officer

EX-32

Exhibit 32

Section 1350 Certification

The following statement is being made to the Securities and Exchange Commission solely for purposes of Section 906 of the Sarbanes-Oxley Act of 2002 (18 U.S.C. 1350), which carries with it certain criminal penalties in the event of a knowing or willful misrepresentation.

Each of the undersigned hereby certifies that the Annual Report on Form 10-K for the period ended December 31, 2007 fully complies with the requirements of Section 13(a) of the Securities Exchange Act of 1934 and that the information contained in such report fairly presents, in all material respects, the financial condition and results of operations of the registrant.

Dated: February 27, 2008	/s/ David B. Speer
	David B. Speer
	Chairman and Chief Executive Officer

Dated: February 27, 2008	/s/ Ronald D. Kropp
	Ronald D. Kropp
	Senior Vice President and Chief Financial Officer