8-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 8-K

CURRENT REPORT

PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

Date of Report (Date of earliest event reported): June 29, 2016 (June 29, 2016)

ALCOA INC.

(Exact name of Registrant as specified in its charter)

Pennsylvania	1-3610	25-0317820
(State or Other Jurisdiction of Incorporation)	(Commission File Number)	(I.R.S. Employer Identification Number)
390 Park Avenue, New York, New York		10022-4608
(Address of Principal Executive Offices)		(Zip Code)

Office of Investor Relations 212-836-2674

Office of the Secretary 212-836-2732

(Registrant’s telephone number, including area code)

(Former Name or Former Address, if Changed Since Last Report)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the Registrant under any of the following provisions:

¨ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

¨ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

¨ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

¨ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Item 7.01. Regulation FD Disclosure.

On June 29, 2016, Alcoa Inc. (“Alcoa”) issued a press release announcing that Alcoa Upstream Corporation, a wholly owned subsidiary of Alcoa, filed an initial Registration Statement on Form 10 (the “Form 10”) with the Securities and Exchange Commission (the “SEC”) in connection with Alcoa’s previously announced plan to separate into two independent, publicly traded companies. A copy of the press release is attached hereto as Exhibit 99.1 and is incorporated herein by reference. Also on June 29, 2016, Alcoa will hold a conference call, which will be broadcast live by webcast, and will make available certain information regarding the business of Arconic Inc. (to which Alcoa plans to change its name in connection with the separation) assuming completion of the separation (the “Arconic Overview”). A copy of the slides to be presented on the call and the Arconic Overview are attached hereto as Exhibits 99.2 and 99.3, respectively, and are incorporated herein by reference.

The information in Item 7.01 of this Current Report on Form 8-K and in Exhibits 99.1, 99.2 and 99.3 is being furnished, not filed, in accordance with the provisions of General Instruction B.2 of Form 8-K. Accordingly, the information in Item 7.01 of Form 8-K and in Exhibits 99.1, 99.2 and 99.3 will not be incorporated by reference into any registration statement filed by Alcoa under the Securities Act of 1933 unless specifically identified therein as being incorporated therein by reference.

Forward-Looking Statements

This communication contains statements that relate to future events and expectations and as such constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include those containing such words as “anticipates,” “believes,” “could,” “estimates,” “expects,” “forecasts,” “intends,” “may,” “outlook,” “plans,” “projects,” “seeks,” “sees,” “should,” “targets,” “will,” “would,” or other words of similar meaning. All statements that reflect Alcoa’s expectations, assumptions or projections about the future, other than statements of historical fact, are forward-looking statements, including, without limitation, statements regarding the separation transaction. Forward-looking statements are not guarantees of future performance and are subject to risks, uncertainties, and changes in circumstances that are difficult to predict. Although Alcoa believes that the expectations reflected in any forward-looking statements are based on reasonable assumptions, it can give no assurance that these expectations will be attained and it is possible that actual results may differ materially from those indicated by these forward-looking statements due to a variety of risks and uncertainties. Such risks and uncertainties include, but are not limited to: (a) uncertainties as to the timing of the separation and whether it will be completed; (b) the possibility that various closing conditions for the separation may not be satisfied; (c) the outcome of contingencies, including legal proceedings; (d) the impact of the separation on the businesses of Alcoa; (e) the risk that the businesses will not be separated successfully or such separation may be more difficult, time-consuming or costly than expected, which could result in additional demands on Alcoa’s resources, systems, procedures and controls, disruption of its ongoing business and diversion of management’s attention from other business concerns; and (f) the other risk factors discussed in Alcoa’s Form 10-K for the year ended December 31, 2015, and other reports filed with the SEC. Alcoa disclaims any obligation to update publicly any forward-looking statements, whether in response to new information, future events or otherwise, except as required by applicable law.

2

Item 9.01. Financial Statements and Exhibits.

(d) Exhibits.

The following are furnished as exhibits to this Current Report on Form 8-K:

Exhibit No.	Description
99.1	Alcoa Inc. press release, dated June 29, 2016.
99.2	Slides to be presented during Alcoa Inc. conference call, dated June 29, 2016.
99.3	Arconic Overview, dated June 29, 2016.

3

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

ALCOA INC.
By:	/s/ PETER HONG
Name:	Peter Hong
Title:	Vice President and Treasurer

Date: June 29, 2016

4

EXHIBIT INDEX

Exhibit No.	Description
99.1	Alcoa Inc. press release, dated June 29, 2016.
99.2	Slides to be presented during Alcoa Inc. conference call, dated June 29, 2016.
99.3	Arconic Overview, dated June 29, 2016.

5

EX-99.1

EXHIBIT 99.1

[Alcoa Logo]

Investor Contact:	Media Contact:
Matt Garth	Monica Orbe
(212) 836-2674	(212) 836-2632
Matthew.Garth@alcoa.com	Monica.Orbe@alcoa.com

ALCOA INC. ANNOUNCES FILING OF INITIAL FORM 10 REGISTRATION STATEMENT FOR SEPARATION OF UPSTREAM BUSINESS, ALCOA CORPORATION

Separation will create a globally cost-competitive Upstream company and an innovation and technology-driven Value-Add company

Separation on track to be completed in the second half of 2016

Alcoa to host conference call today at 8:30 AM Eastern Daylight Time to discuss Form 10

New York, June 29, 2016 – Lightweight metals leader Alcoa (NYSE:AA) today announced a major milestone in connection with its pending separation into two strong standalone, publicly-traded companies. Alcoa Upstream Corporation (to be renamed Alcoa Corporation prior to separation) has filed an initial Registration Statement on Form 10 with the Securities and Exchange Commission (SEC). Alcoa Corporation will hold the Upstream and North American packaging businesses. The Value-Add businesses will remain in the existing company, which will be named Arconic Inc. The separation is on track to be completed in the second half of 2016.

“The filing of the Form 10 is an important milestone as we prepare to launch two businesses that are well-positioned for success,” said Klaus Kleinfeld, Alcoa Chairman and Chief Executive Officer. “Alcoa Corporation has a low-cost base that will enable resilience and value-creation at all stages of the commodity cycle. Arconic is a technology-driven company producing performance materials and highly engineered products for growth markets, poised to deliver consistent profitable growth. Through our multi-year transformation, we have substantially re-positioned each business and laid the foundation for future long-term success. The separation will allow each new company to pursue its own distinct corporate strategy and unlock the full value of each business.”

Alcoa Corporation will be a globally competitive Upstream company. Its businesses will include Bauxite, Alumina, Aluminum, Cast Products and Energy and rolling mill operations that will serve the North American packaging market. Arconic will be a global leader in precision engineering and advanced manufacturing, providing a wide range of multi-material solutions to growth markets including aerospace structures, jet engines, automotive and commercial transportation. Its businesses will include the Engineered Products and Solutions, Global Rolled Products, and Transportation and Construction Solutions segments.

The initial Form 10 includes preliminary detailed information about Alcoa Corporation as a standalone company, such as historical financial information, as well as a description of Alcoa Corporation’s business and strategy and other legal and financial disclosures. The initial Form 10 is subject to change prior to completion of the separation.

The separation remains subject to the satisfaction of certain conditions, including obtaining final approval from the Alcoa Board of Directors, receipt of a favorable IRS ruling and opinions of Alcoa’s tax advisors regarding certain U.S. federal income tax matters and the effectiveness of the Form 10.

A copy of the initial Form 10 is available on the SEC website at www.sec.gov and can also be viewed on www.Alcoa.com/form_10_presentation. Supplemental information about Arconic can also be viewed on Alcoa’s website.

Conference Call

Alcoa will host a conference call at 8:30 AM Eastern Daylight Time to review the initial Form 10 and answer questions. The meeting will be webcast via alcoa.com. Call information and related details are available at www.Alcoa.com/form_10_presentation.

Dissemination of Company Information

Alcoa intends to make future announcements regarding Company developments and financial performance through its website at www.alcoa.com.

About Alcoa

A global leader in lightweight metals technology, engineering and manufacturing, Alcoa innovates multi-material solutions that advance our world. Our technologies enhance transportation, from automotive and commercial transport to air and space travel, and improve industrial and consumer electronics products. We enable smart buildings, sustainable food and beverage packaging, high performance defense vehicles across air, land and sea, deeper oil and gas drilling and more efficient power generation. We pioneered the aluminum industry over 125 years ago, and today, our approximately 58,000 people in 30 countries deliver value-add products made of titanium, nickel and aluminum, and produce best-in-class bauxite, alumina and primary aluminum products. For more information, visit www.alcoa.com, follow @Alcoa on Twitter at www.twitter.com/Alcoa and follow us on Facebook at www.facebook.com/Alcoa.

Forward-Looking Statements

This communication contains statements that relate to future events and expectations and as such constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include those containing such words as “anticipates,” “believes,” “could,” “estimates,” “expects,” “forecasts,” “intends,” “may,” “outlook,” “plans,” “projects,” “seeks,” “sees,” “should,” “targets,” “will,” “would,” or other words of similar meaning. All statements that reflect the Company’s expectations, assumptions or projections about the future, other than statements of historical fact, are forward-looking statements, including, without

2

limitation, statements regarding the separation transaction. Forward-looking statements are not guarantees of future performance and are subject to risks, uncertainties, and changes in circumstances that are difficult to predict. Although the Company believes that the expectations reflected in any forward-looking statements are based on reasonable assumptions, it can give no assurance that these expectations will be attained and it is possible that actual results may differ materially from those indicated by these forward-looking statements due to a variety of risks and uncertainties. Such risks and uncertainties include, but are not limited to: (a) uncertainties as to the timing of the separation and whether it will be completed; (b) the possibility that various closing conditions for the separation may not be satisfied; (c) the outcome of contingencies, including legal proceedings; (d) the impact of the separation on the businesses of Alcoa; (e) the risk that the businesses will not be separated successfully or such separation may be more difficult, time-consuming or costly than expected, which could result in additional demands on Alcoa’s resources, systems, procedures and controls, disruption of its ongoing business and diversion of management’s attention from other business concerns; and (f) the other risk factors discussed in the Company’s Form 10-K for the year ended December 31, 2015, and other reports filed with the SEC. The Company disclaims any obligation to update publicly any forward-looking statements, whether in response to new information, future events or otherwise, except as required by applicable law.

3

EX-99.2

Update on Alcoa’s Separation: Filing of Initial Form 10

June 29, 2016

1

Exhibit 99.2

Important Information

2

Forward–Looking Statements

This presentation contains statements that relate to future events and expectations and as such constitute forward-looking statements within the

meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include those containing such words as “anticipates,”

“believes,” “could,” “estimates,” “expects,” “forecasts,” “goal,” “intends,” “may,” “outlook,” “plans,” “projects,” “seeks,” “sees,” “should,”

“targets,” “will,” “would,” or other words of similar meaning. All statements that reflect Alcoa’s expectations, assumptions or projections about the

future, other than statements of historical fact, are forward-looking statements, including, without limitation, forecasts concerning global demand

growth for aluminum and bauxite and statements regarding the separation transaction. Forward-looking statements are not guarantees of future

performance and are subject to risks, uncertainties, and changes in circumstances that are difficult to predict. Although Alcoa believes that the

expectations reflected in any forward-looking statements are based on reasonable assumptions, it can give no assurance that these expectations

will be attained and it is possible that actual results may differ materially from those indicated by these forward-looking statements due to a

variety

of

risks

and

uncertainties.

Such

risks

and

uncertainties

include,

but

are

not

limited

to:

(a)

uncertainties

as

to

the

timing

of

the

separation

and whether it will be completed; (b) the possibility that various closing conditions for the separation may not be satisfied; (c) the outcome of

contingencies, including legal proceedings; (d) the impact of the separation on the businesses of Alcoa; (e) the risk that the businesses will not be

separated successfully or such separation may be more difficult, time-consuming or costly than expected, which could result in additional demands

on Alcoa’s resources, systems, procedures and controls, disruption of its ongoing business and diversion of management’s attention from other

business concerns; (f) material adverse changes in aluminum industry conditions, including global supply and demand conditions and fluctuations in

London Metal Exchange-based prices and premiums, as applicable, for primary aluminum, alumina, and other products, and fluctuations in

indexed-based and spot prices for alumina; (g) deterioration in global economic and financial market conditions generally; and (h) the other risk

factors discussed in Alcoa’s Form 10-K for the year ended December 31, 2015, and other reports filed with the U.S. Securities and Exchange

Commission (SEC). Alcoa disclaims any obligation to update publicly any forward-looking statements, whether in response to new information,

future

events

or

otherwise,

except

as

required

by

applicable

law.

Market

projections

are

subject

to

the

risks

discussed

above

and

other

risks

in

the

market.

Topics for Today’s Discussion

3

What We Will Cover Today and What We Will Cover in the 2Q 2016 Earnings Call

What we will cover today

Timeline

for the separation

An overview of the initial Form 10 filed

What we will cover in the 2Q earnings call

Quarterly

results

3Q16 outlook

Overview of longer term market trends

and performance

Current Form 10 Focuses on Carve-Out Financials; Pro-Forma Details to Follow

4

Form 10 Content: Current and Future

Financial information included in the current filing

Carve-out financials for Alcoa Corporation

May not reflect

Alcoa Corporation’s combined results

of operations, financial position and cash flows had it

been a standalone company during the periods

presented

Include general corporate expenses of Alcoa Inc. that

were not historically charged to Upstream business

Expenses allocated based on

direct usage (where

possible) and

relative segment revenue

Pension / OPEB pro-forma adjustments presented

Additional adjustments will be included in later filings

What we will include in subsequent amendments

Additional pro-forma adjustments

Statement of Combined Operations

Balance Sheet

Capital structure

Alcoa Corporation’s board of directors

Klaus Kleinfeld

Chairman and Chief Executive Officer

5

June 29, 2016

Executing

Separation

–

Achieving

a

Key

Milestone

with

Initial

Form

10

Filing

6

Separation Approximate Timeline and Path to Completion

4Q 2015

1

st

Half 2016

2

nd

Half 2016

Launched New Value-Add

Name and

Brand and Refreshed Alcoa Brand

Initial Form 10 Filing

-

e.g.,

–

3-Year Carve-Out Financials

–

Form of Separation and Legal

Structure

–

Intended Debt Structure

–

Allocation of Assets and Liabilities

–

Governance Elements

Separate

Supplier/Partner Contracts

Form

10

Effectiveness

and

Final

Board

Approval

Complete

Separation

of

IT

Systems

and Infrastructure

Complete Financing

Begin Trading

as Two Companies

Launched the Separation Program

Office

Announced the Executive

Management Teams

Confirmed

U.S.

Domicile

for

Both Companies

Launched New Business

Improvement

Programs

for

2016

–

Arconic to Deliver $650M

–

Alcoa Corporation to Deliver $600M

–

Above Includes Overhead Reductions

Across Alcoa                                        

($100M

in

2016,

$225M

over

two

years)

1)  $50M of $100M to be realized in 2016 comes from Arconic, remaining $50M from Alcoa Corporation.

1

Alcoa

Inc.’s

debt

remains

with

Arconic

1

(Remain

Co);

Alcoa

Corp.

to

raise

approx.

$1 billion

Estimated

Pro

Forma

Pension/OPEB

obligation

2

:

Alcoa

Corporation

$2.6B,

Arconic

$3.0B

Alcoa Corporation (New Co) will be listed on the NYSE through a tax-free spinoff to shareholders

7

In

light

of

volatile

commodity

and

debt

markets,

Arconic

to

retain

up

to

19.9%

of

Alcoa

Corporation

Executing

Separation

–

Form

10

Highlights

Separation on track for 2nd half 2016

1)  Except for BNDES loans; refer to the Form 10 for additional details  2)  As of March 31, 2016

Arconic: Premier Provider of Innovative Solutions to Growing Markets

8

Aerospace

and

Automotive

Products

Brazing,

Commercial

Transportation

and Industrial

Micromill™

Products and

Services

Power and

Propulsion

Fastening

Systems

and Rings

Forgings and

Extrusions

Titanium and

Engineered

Products

Building and

Construction

Systems

Wheel and

Transportation

Products

Key Attributes

Premier

supplier

of

high-performance

advanced

multi-material

products

and

solutions

Positioned to strengthen in growth markets with significant customer synergies

e.g., aerospace

and automotive

Expanded multi-material, technology and process expertise

Innovation leader with full pipeline of products and solutions

Successfully shifting product

mix to higher value-add

Robust margins and

investment opportunities above cost of capital

Arconic Business Operations and Key Attributes

GRP

EPS

TCS

Alcoa Corporation: Cost Competitive Industry Leader

9

1) CRU analysis 2) Mined in 2015, including equity interests 3) CRU and Alcoa analysis 4) Includes Saudi Arabia                    

Joint Venture 

BDMT = Bone Dry Metric Ton

Alcoa Corporation Business Operations and Key Attributes

Key Attributes

Robust

projected aluminum demand growth of 5% in 2016,

doubling between 2010 and 2020;

3

rd

Party bauxite demand projected to double by 2025

Attractive Portfolio:

World’s

largest,

low

cost

bauxite

miner

at

the

1

st

quartile

1

on

the

cost

curve

(45M

BDMT

2

)

World’s

largest,

most

attractive

alumina

business

in

the

1

st

quartile

3

of

the

cost

curve

(17.3

MMT

total

capacity)

Substantial energy assets with operational flexibility (Power production capacity of 1,685 MW)

Optimized

smelting

capacity

(3.1

MMT)

continuing

to

improve

its

2

nd

quartile

3

cost

curve

position

18 casthouses

4

and 2 rolling mills providing value-add products

Diverse sites –

close proximity to major markets

Committed to disciplined capital allocation and prudent return of capital to

shareholders

Cast Products

World’s largest

bauxite miner

1

1

st

quartile

3

cost curve refiner

Flexibility to

profit from

market cycles

Strategic global

footprint

Value-add

products in

key markets

Rolled Products

Aluminum

Energy

Alumina

Bauxite

Can sheet leader

in N.A.

10

Separation Process Overview

Will trade on the New York Stock

Exchange under the ticker “AA”

“New Co.”

Will trade on the New York Stock

Exchange under the ticker “ARNC”

“Remain Co.”

Alcoa Corporation to be Created as a New Company

Guiding Principles

Create optimal capital structures for

both entities

Pension / OPEB

Debt restrictions

Optimize opportunities for financing

Minimize separation costs

Debt breakage

Financing

Tax

Minimize execution risks

Intended Capital Structure Creates Strong Balance Sheets for Both Co.’s

11

Intended Capital Structure Overview

Guiding principles for new            

capital structures

Create the strongest balance sheets

possible for both entities to optimize

financing opportunities

Minimize debt breakage and other

financing costs

e.g., refinancing of legacy parent entity

Arconic (Remain Co.)

Alcoa Inc.’s debt remains with Arconic

1

Arconic

uses cash received from Alcoa

Corporation to pay down a portion of the debt

retained from Alcoa Inc.

Arconic

not expected

to issue debt

Alcoa Corporation (New Co.)

Conducts a capital raise of approximately $1B

in funded debt

Proceeds, net of fees,

will be used to pay Arconic

Obtains up to ~$1.5B of liquidity facilities             

through a senior secured revolving credit facility 

Intended capital structure

1)  Except for BNDES loans; refer to the Form 10 for additional details

80/20 Structure Description

Retained Interest: Both Companies Positioned for Success

12

...Arconic

to retain up to 19.9% of Alcoa Corporation

In light of recent volatile commodity markets and

conditions in the high-yield debt market...

Provides Arconic

a liquid security that                                                          

can be monetized

to strengthen the

balance sheet

Reduces reliance on Alcoa Corporation to raise debt

Enables Alcoa Corporation to be separated with lower leverage

Filed for IRS private letter ruling

Alcoa Corporation Shares Outstanding Ownership

Barclays

U.S.

Corporate

High

Yield

Average

OAS

1

(%

pts.)     

(6/20/11-6-16/16)

1)

OAS = Option-Adjusted Spread

Source: Bloomberg

All-in Aluminum (LME Cash + Midwest Premium) ($/MT)

(6/20/11-6/16/16)

Recent

historic lows

1,500

1,700

1,900

2,100

2,300

2,500

2,700

2,900

06/11

12/11

06/12

12/12

06/13

12/13

06/14

12/14

06/15

12/15

3

4

5

6

7

8

9

80.1%

19.9%

Free float

Arconic

Alcoa Inc. conducts a pro rata

distribution of at least 80.1%

of

the outstanding shares

We continue to monitor market conditions in the commodity

and high-yield debt market and to assess the impact of that

situation on how to structure the transaction

06/11

12/11

06/12

12/12

06/13

12/13

06/14

12/14

06/15

12/15

13

Liability Allocation Overview

“Remain Co.”

Liabilities Allocated to Each Entity According to Several Guiding Principles

Legal

Environmental

Pension / OPEB

Liabilities

“New Co.”

Guiding Principles

Legal and Environmental

Allocated generally to

originating business

e.g., Grasse River to Arconic

and Fusina

to

Alcoa Corporation

Pension / OPEB

1

Allocated to employee’s last

business affiliation

Closed / divested / HQ

allocated to balance

funding level and

contribution requirements

1) Estimated Pro Forma Pension/OPEB obligation as of March 31, 2016: Alcoa Corporation $2.6B,  Arconic $3.0B

Executing Separation –

On Course for Second Half of 2016

14

Separation Approximate Timeline and Path to Completion

1)  $50M of $100M to be realized in 2016 comes from Arconic, remaining $50M from Alcoa Corporation.

4Q 2015

1

st

Half 2016

2

nd

Half 2016

Launched New Value-Add

Name and

Brand and Refreshed Alcoa Brand

Initial Form 10 Filing

-

e.g.,

–

3-Year Carve-Out Financials

–

Form of Separation and Legal

Structure

–

Intended Debt Structure

–

Allocation of Assets and Liabilities

–

Governance Elements

Separate

Supplier/Partner Contracts

Form

10

Effectiveness

and

Final

Board

Approval

Complete

Separation

of

IT

Systems

and Infrastructure

Complete Financing

Begin Trading

as Two Companies

Launched the Separation Program

Office

Announced the Executive

Management Teams

Confirmed

U.S.

Domicile

for

Both Companies

Launched New Business

Improvement

Programs

for

2016

–

Arconic to Deliver $650M

–

Alcoa Corporation to Deliver $600M

–

Above Includes Overhead Reductions

Across Alcoa                                        

($100M   in 2016, $225M over two years)

1

Get Ready for The Launch of Two Strong, New Companies

15

Arconic and Alcoa Corporation Branding

16

EX-99.3

EXHIBIT 99.3

Arconic Inc. Overview

June 29, 2016

The following summary describes Arconic’s business assuming the completion of Alcoa Inc.’s (“Alcoa”) plan to separate into two independent, publicly traded companies: a globally cost-competitive upstream company that will be named Alcoa Corporation, and a technology-driven, value-add company that will be named Arconic Inc. The separation is on track to be completed in the second half of 2016 but remains subject to the satisfaction of certain conditions, including obtaining final approval from the Alcoa Board of Directors, receipt of a favorable IRS ruling and opinions of Alcoa’s tax advisors regarding certain U.S. federal income tax matters and the effectiveness of the Form 10. Additional information about the separation has been provided in the registration statement on Form 10 that Alcoa Upstream Corporation has filed with the U.S. Securities and Exchange Commission. The Form 10 is subject to change prior to completion of the separation and includes preliminary detailed information about Alcoa Corporation as a standalone company, including historical financial information, risks related to the separation, and a description of Alcoa Corporation’s business and strategy and other legal and financial disclosures.

1

Arconic will be a premier innovator of high performance multi-material products and solutions and a global leader in precision engineering and advanced manufacturing. The company is positioned to profitably grow in growth markets, with deep technological capabilities and significant customer synergies. It will be a Fortune 500 company with large scale and globally diverse operations.

Includes Engineered Products and Solutions (EPS); Global Rolled Products (GRP); and Transportation and Construction Solutions (TCS) segments

Positioned to grow profitably—innovation leader with full pipeline of products and solutions

Pursue investment opportunities that provide a return above the cost of capital

41% of 2015 revenues tied to high-growth aerospace industry

Competitors include: Precision Castparts, Allegheny Technologies, Barnes Group, Carpenter Technology, Constellium, Kaiser Aluminum, Moog, Parker-Hannifin, TransDigm, and Woodward

• 80% of revenue in five key businesses from #1 or #2 positions – Aerospace, Automotive, Commercial Transportation, Industrial Gas Turbines (IGT), Building and Construction (B&C)

EPS: Differentiated supplier to high-growth aerospace industry with leading positions on every major aircraft and jet engine platform, underpinned by market leadership in jet engine and industrial gas turbine airfoils, aerofasteners

GRP: at the forefront of lightweighting the automotive industry

TCS:

n Building & Construction Systems: North American leader in commercial architectural systems

n Wheel and Transportation Products: Global leader in forged aluminum commercial vehicle wheels

Aligned with Global Megatrends

Globalization: worldwide expansion in air travel

Urbanization: commercial building & construction Growth

• Energy Efficiency: lightweighting of transportation, both aerospace and automotive Market Leadership

Leading technology partner with multi-material capabilities

Produces >90% of all aerospace structures and rotating components

Broad aerospace product array, meeting large OEM, and multi-platform requirements

• Automotive Leader – lightweighting expertise, bonding technology, Micromill

Shareholder Benefits

Best-in-class, multi-material, scaled business

Disciplined cash flow reinvestment into highest return initiatives

• Top line growth driven by exposure to sustainable growth markets

Market Positions

Arconic Company Profile

Creating a Multi-Material Innovation Powerhouse Serving High-Growth Markets

2

EPS develops and manufactures high-performance, engineered products and solutions for the aerospace, industrial gas turbine, commercial transportation and oil and gas markets. With 2015 revenues of $5.3 billion and 24,000 employees in 15 countries, EPS has four global business units. Competitive strengths:

Leadership positions in high-growth aerospace and industrial markets; 83% of revenues from #1 or #2 market positions

- Aerospace engines: airfoils, rings and performance coatings

- Aerospace structures: fasteners, extrusions, and conventional forging and isothermal forging

- Aerospace products: titanium aluminide, fine grain sheet

- Industrial gas turbines

• Highly differentiated competitive position

- Unique customer “one-stop shop” benefits: alloy development, new product design and development, process technology development and manufacturing excellence

- Unparalleled capabilities in advanced, high-quality, multi-alloy powder production and enhanced 3-D printing

• Strategic global footprint

- Key innovation and R&D centers positioned adjacent to customer clusters in North America and Europe

- Low-cost manufacturing footprint, including key operational bases in Mexico, China, Hungary and Morocco. Arconic is one of a few suppliers qualified to produce jet engine rings, investment castings and aerospace and industrial fasteners in many of those regions.

• Strong base for future growth

- Over the past 18 months, Arconic has signed at least $10 billion in new contracts with important aerospace customers, including Boeing, Airbus, Embraer and GE.

3

GRP manufactures a broad range of differentiated aluminum sheet and plate products for the automotive, aerospace, commercial transportation, brazing and industrial markets. With revenues of $5.3 billion and approximately 11,000 employees in seven countries, GRP has three business units. Within GRP, 61 percent of revenues come from #1 or #2 market positions.

• With a plate and sheet portfolio focused on innovation, Arconic has broad-based technological expertise and diversification across a wide range of markets: aerospace, automotive, commercial transportation, industrial and brazing.

• The North American automotive market is in the midst of an historic shift to lightweight materials. Arconic is at the forefront of capturing growing demand for aluminum sheet. Arconic invented the bonding process that has been the key enabler of the mass-market shift from steel to aluminum. Arconic estimates that it will grow its automotive sheet revenue approximately six-fold, from $229 million in 2013 to $1.3 billion in 2018.

Arconic Micromill technology produces aluminum sheet that is 30 percent stronger than incumbent automotive aluminum, and 30 percent lighter and with twice the formability of high strength steel. The process technology is also breakthrough, reducing manufacturing time from 20 days to 20 minutes.

This technology is allowing our customers to redefine the boundaries of vehicle design, supporting the creation of lighter, more fuel efficient, safer and more stylish vehicles for the future. Micromill material debuted on the 2016 Ford F-150 and Arconic has a Joint Development Agreement with Ford to collaborate on next-generation aluminum alloys for automotive parts using Micromill™ technology. Additionally, 13 customers on the three major continents are trialing Micromill material.

• Arconic is the only rolling company with a global approach to serving aerospace customers by consolidating offerings from both GRP and EPS across aerospace structures and jet engines, through strong key account management. A single leader is assigned for each end market and is supported by a Center of Excellence (CoE) that drives standards globally.

4

TCS designs and manufactures forged aluminum wheels for the commercial transportation market and architectural products and solutions for the non-residential building and construction market. Arconic is the acknowledged global leader in the market for forged aluminum truck wheels, and a leader in the North America architectural systems market. The Group had 2015 revenues of $1.9 billion and has 6,000 employees. Within TCS, 79% of revenues come from #1 or #2 market positions.

Arconic’s differentiation in commercial transportation and building and construction is built on lightweight materials innovation, surface design expertise and engineering capability.

- Innovation growth driver: more than 30 percent of revenue from products introduced in past three years

- Forged aluminum wheels reduce vehicle weight, which maximizes payload and can reduce greenhouse gas emissions

- The popular Dura-Bright® EVO is 10 times more corrosion-resistant than the previous generation, significantly reducing the cost of overall maintenance

- Regulations and customer demand to make buildings more energy efficient is increasing the demand for innovative, “green building” solutions.

Arconic’s global and regional presence is a major differentiator that offers the commercial transportation and building and construction businesses a cost-effective footprint in sales and operations, as well as robust supply chain options.

5

Arconic Markets

Arconic’s largest and fastest growing market is aerospace, where Alcoa has had a major presence since the Wright brothers’ first flight. Fueled by an expanding middle class and increasing air travel, global aircraft demand has led to the largest order book in aviation history, with a nine-year backlog for both commercial jets and engines. Arconic is well-positioned to benefit from that growth with a range of high performance multi-materials and highly engineered products and solutions for engines and structures on virtually every aircraft platform.

Arconic is a leader in delivering a wide range of structural components such as fasteners, sheet and plate, forgings, extrusions and castings. Aircraft are reducing weight and improving aerodynamics to improve efficiency. Arconic’s unmatched capabilities, proprietary alloys and technologies deliver the structural solutions needed to help create the world’s most efficient aircraft.

Arconic produces approximately ninety percent of jet engine components, from the world’s most advanced blades and vanes to rings and discs. The jet engine is the main lever to improve the efficiency of an aircraft, and significant improvements are being targeted by major OEMs to meet customer demands to decrease fuel burn by 15 percent, emissions of NOx by 50 percent and noise levels by 15 decibels. Arconic’s advanced airfoil and engine component capabilities help deliver these reductions and a 30 percent improvement in the maintenance cycle.

Inexpensive, clean natural gas is increasing the use of gas-fired power generation in the United States, now making up one third of all electricity produced in the country. Additionally, growth comes from emerging countries focused on quickly and cost-effectively building out their energy supply, in response to population growth and the rise of the middle class. Arconic is strongly positioned to capture that increased demand as, in response, utilities move towards more efficient turbines that run on cleaner, more cost-effective natural gas. As the leader in advanced airfoils and other components for industrial gas turbines, Arconic produces high-quality parts intelligently designed to withstand the extreme operating temperatures often higher than the melting point of the metal itself. Today, approximately 75 percent of gas turbines worldwide use airfoils produced by Arconic.

North America is Arconic’s most important automotive market. In North America, new stringent federal fuel economy regulations, coupled with increasing consumer demand for more fuel efficient vehicles, is leading automakers to rethink vehicle design and push ahead with alternate powertrains, new technologies and advanced materials. Aluminum offers automakers the fastest, safest, most environmentally-friendly and cost-effective way to get the job done. Low-density aluminum is a game-changer and automakers are taking full advantage of all the consumer benefits it provides.

This move to aluminum-intensive vehicles further benefits Arconic and we have been aggressively capturing increased demand for automotive aluminum sheet, with demand expected to increase tenfold between 2012 and 2025. Arconic’s Micromill technology is providing us a further competitive edge in both cost efficiency and innovation, enabling us to attack steel components. Outside of North America, automotive production also remains strong in Europe and China – driven by stable consumer sentiment, availability of affordable credit and low fuel-prices.

6

As governments move to greater enforcement of emissions and fuel efficiency regulation, the trajectory of lightweighting solutions for the commercial transportation market remains strong. In China, the world’s largest commercial transportation market, the majority of trucks and buses still run on heavy steel wheels, providing tremendous growth opportunity for lightweight, low-maintenance aluminum wheels as well as lightweighting opportunities in mass transportation from high speed rail to metrocars. In Europe, market forces are accelerating a shift from steel to aluminum wheels. Due to the ability to increase payload and fuel efficiency while decreasing cost of ownership, North America has the world’s highest aluminum wheel adoption rates. As the acknowledged global leader in forged aluminum heavy duty truck wheels, Arconic is the company best positioned to benefit from those positive market opportunities.

The North American building and constrcution market, where Arconic’s Kawneer systems are the acknowledged leader, remains strong. Globally, the non-residential building and construction market continues to be driven by key megatrends including growth of the middle class, urbanization, growing demand for energy efficient structures able to withstand security and climate threats; and an increasing appreciation of design and aesthetics. Arconic is well positioned around the world to capture the growth driven by these trends. Europe continues its gradual-but-steady recovery, the market in China is expected to return to higher growth rates over the next three years and the Indian market will continue to grow at a high rate.

Arconic’s brazing applications are benefitting from the increasing need for thermal efficiency to improve efficiency, durability and emissions in automotive powertrain and HVAC (heating, ventilation and air conditioning) systems. Given Arconic’s leadership in providing multilayer brazing sheet solutions for the most challenging heat exchanger applications, it is ideally positioned to deliver the necessary combination of strength, thermal conductivity and corrosion resistance for advanced heat exchangers in the automotive and HVAC markets.

Serving a range of markets, Arconic leverages the unique characteristics of aluminum to help fabricate better-performing industrial products. We make strong, lightweight, corrosion-resistant materials used in applications that range from building and construction, machinery and circuitry to cookware and appliances. We are also increasing penetration into growing markets such as wind turbines, solar power and liquefied natural gas (LNG) storage tanks.

Arconic provides products to meet the unique needs of our regional customers in China, Russia and South America. For example, in Brazil we recently expanded our capability to produce aseptic foil, a type of high-growth, differentiated packaging.

Arconic Advantages

Arconic provides its businesses with a unique array of levers, called “Arconic Advantages,” that provide a sharper competitive edge and enable powerful value creation for shareholders, customers and employees.

Technology Advantage

The Arconic Technical Center (ATC), the world’s largest lightweight multi-material technology center, provides a comprehensive range of technological competencies that are unmatched by any Arconic competitor.

Recent examples of commercial success:

Advanced aluminum-lithium for the aerospace industry. Arconic operates the world’s largest aluminum-lithium cast house, in Lafayette, Indiana, and the world’s widest rolling mill, in Davenport, Iowa, to produce the largest single-piece aircraft parts possible. The first ever aluminum-lithium forging for a jet engine front fan blade was developed by Arconic. The forging is lighter and more cost effective than traditionally-used titanium and carbon fiber, helping Pratt & Whitney meet performance targets for its next-generation engines.

Applying aerospace expertise to defense applications. Leveraging expertise from

7

producing the A380 inner rear wing spar – the largest aerospace forging in the world – Arconic has delivered weight- and cost-saving components for defense applications, like the Joint Strike Fighter bulkhead and the largest single-piece forged aluminum hull for combat vehicles.

Advanced alloy development and additive manufacturing. Arconic is building on its long history of leadership in advanced alloy development to create a leadership edge in the emerging space of additive manufacturing. We recently completed construction of a new powder production facility for Nickel, Titanium and Aluminum that will support Arconic’s growing 3D printing base — the “smart ink of the future.” Additionally, Arconic’s proprietary hybrid “Ampliforge” process combines additive and traditional manufacturing methods to uniquely enhance the strength of 3D printed parts. Airbus recently awarded Arconic a contract to supply 3D printed titanium fuselage and engine parts to be used in commercial aircraft.

Customer Intimacy Advantage

More than 65 percent of Arconic’s revenue from its top 10 customers in key markets is shared among our three groups. Through a key account management approach, Arconic strengthens relationships across its customer organizations, allowing us to understand the applications of our products to meet the precise needs of our customers. Our technological skills, paired with our delivery system, provide our customers with products and solutions to make them more competitive and help them win.

Arconic is the only company that can deliver to customers the full combination of materials science, development, engineering and manufacturing solutions. Through a joint go-to-market approach, Arconic reduces complexity and mitigates assembly and supply chain risk for customers. Being involved throughout the entire development process enables Arconic to produce materials and solutions to the customer’s form, fit and function.

Procurement Advantage

Arconic leverages its purchasing power of $7 billion in spending with vendors and suppliers to maximize savings, while forming important partnerships with key suppliers to enhance our innovation and customer delivery.

Arconic utilizes the latest in procurement tools in key areas such as risk management, sourcing strategies, supply chain optimization, specification management, demand management and supplier consolidation.

Talent Advantage

Talent is a significant competitive advantage at Arconic. Our management team has a strong track record of performance and execution. The management team is composed of a group of talented, entrepreneurial-minded business and functional leaders. Klaus Kleinfeld, Arconic’s Chairman and CEO, who joined Alcoa in 2007, has a background of leadership successes in multiple industries, including business restructuring as well as innovation-led growth with a strong international orientation. With this approach, he led the Company’s turnaround through the economic recession and the collapse of the aluminum market, restructuring the upstream businesses while building up the value add businesses. Ken Giacobbe, who will be Arconic’s chief financial officer (CFO), is currently the CFO of EPS and has extensive experience with the value-add businesses. The leaders of the three business groups have significant leadership experience with major global industrial companies.

To attract the best and brightest talent, Arconic has a robust recruiting program within the top engineering and business schools and partners with technical and community colleges to support our local plants. Arconic takes a systematic approach to talent development, providing employees with stimulating assignments and clear career pathing. We have a robust leadership training curriculum to develop a solid pipeline of leaders and managers ready to move up to the next level.

Following the principle of pay-for-performance, we provide annual cash and equity incentives to our employees that motivate achievement of aggressive financial targets. To maintain a focus on long-term profitable growth and alignment with shareholder interests, leaders have a significant portion of their compensation in the form of performance equity shares.

Operating Systems Advantage

Our businesses have the benefit of a lean, efficient “right sourced” value chain and an agile, operating system that was stress-tested during the worst downturn in the history of aluminum industry. Central to our daily management is a robust operating system called Degrees of Implementation (DI). The DI system engages all employees to participate in growth, productivity and asset optimization. The tool gives management full transparency to track execution of employee improvement initiatives from ideas to

8

cash. Since the beginning of 2016, 24,000 employees generated 13,000 ideas for substantial cost savings, cash generation and revenue growth and are engaged in converting those to achieve a $650 million target.

Additionally, Arconic utilizes a full toolbox to optimize customer engagement, product quality and operational efficiency. Key tools include:

Arconic Commercial Advantage (ACA) establishes best practices for Arconic’s entire sales cycle, including account management, customer value proposition, pricing, negotiations, risk management, order management.

Quality Management Systems (QMS) establishes standards, process management methodologies and technical networks to deliver zero defects and zero quality excursions, thereby reducing cost of poor quality and improving customer satisfaction.

Arconic Business Management System (ABS) is a company-wide methodology to increase efficiency of production systems and achieve business targets. The ABS system has enabled us to double our automotive flow path output at our Davenport facility with minimal capital costs.

In summary, with leadership in growing markets, unparalleled innovation, customer intimacy, and advantages in talent, procurement, and operating systems, we are ambitious about Arconic’s ability to create value.

Forward-Looking Statements

This summary contains statements that relate to future events and expectations and as such constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include those containing such words as “anticipates,” “believes,” “could,” “estimates,” “expects,” “forecasts,” “intends,” “may,” “outlook,” “plans,” “projects,” “seeks,” “sees,” “should,” “targets,” “will,” “would,” or other words of similar meaning. All statements that reflect Alcoa’s expectations, assumptions or projections about the future, other than statements of historical fact, are forward-looking statements, including, without limitation, statements regarding the separation transaction and expectations of growth in end markets, market position, revenue or other performance measure. Forward-looking statements are not guarantees of future performance and are subject to risks, uncertainties, and changes in circumstances that are difficult to predict. Although Alcoa believes that the expectations reflected in any forward-looking statements are based on reasonable assumptions, it can give no assurance that these expectations will be attained and it is possible that actual results may differ materially from those indicated by these forward-looking statements due to a variety of risks and uncertainties. Such risks and uncertainties include, but are not limited to: (a) uncertainties as to the timing of the separation and whether it will be completed; (b) the possibility that various closing conditions for the separation may not be satisfied; (c) the outcome of contingencies, including legal proceedings; (d) the impact of the separation on the businesses of Alcoa Inc. (including the businesses of Arconic); (e) the risk that the businesses will not be separated successfully or such separation may be more difficult, time-consuming or costly than expected, which could result in additional demands on Alcoa’s and/or Arconic’s resources, systems, procedures and controls, disruption of its ongoing business and diversion of management’s attention from other business concerns; (f) deterioration in global economic and financial market conditions generally; (g) unfavorable changes in the markets served by Arconic; (h) political, economic, and regulatory risks in the countries in which Arconic operates or sells products; and (i) the other risk factors discussed in Alcoa’s Form 10-K for the year ended December 31, 2015, and other reports filed with the SEC. Alcoa disclaims any obligation to update publicly any forward-looking statements, whether in response to new information, future events or otherwise, except as required by applicable law.