6-K

FORM 6-K

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

REPORT OF FOREIGN PRIVATE ISSUER

Pursuant to Rule 13a-16 or 15d-16

of the Securities Exchange Act of 1934

For the month of May, 2007

Commission File Number 000-13355

ASM INTERNATIONAL N.V.

(Translation of registrant’s name into English)

JAN VAN EYCKLAAN 10

3723 BC BILTHOVEN

THE NETHERLANDS

(Address of principal executive offices)

Indicate by check mark whether the registrant files or will file annual reports under cover of Form 20-F or Form 40-F.

Form 20-F  x    Form 40-F  ¨

Indicate by check mark if the registrant is submitting the form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1):  ¨

Note: Regulation S-T Rule 101(b)(1) only permits the submission in paper of a Form 6-K if submitted solely to provide an attached annual report to security holders.

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7):  ¨

Note: Regulation S-T Rule 101(b)(7) only permits the submission in paper of a Form 6-K if submitted to furnish a report or other document that the registrant foreign private issuer must furnish and make public under the laws of the jurisdiction in which the registrant is incorporated, domiciled or legally organized (the registrant’s “home country”), or under the rules of the home country exchange on which the registrant’s securities are traded, as long as the report or other document is not a press release, is not required to be and had not been distributed to the registrant’s security holders, and, if discussing a material event, has already been the subject of a Form 6-K submission or other Commission filing on EDGAR.

Indicate by check mark whether the registrant by furnishing the information contained in this Form is also thereby furnishing the information to the Commission pursuant to Rule 12g3-2(b) under the Securities Exchange Act of 1934.    Yes  ¨    No  x

If “Yes” is marked, indicate below the file number assigned to the registrant in connection with Rule 12g3-2(b): 82-                     .

Exhibits		Filed Herewith
Exhibit 99.1	ASM International N.V. Receives Multi-System Order from Leading DRAM Memory Manufacturer for Eagle® PECVD Systems	X

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

Dated: May 10, 2007	ASM INTERNATIONAL N.V.
		/s/    ARNOLD J.M. VAN DER VEN
		Arnold J.M. van der Ven
		Managing Director and Chief Financial Officer

ASM INTERNATIONAL N.V.

(THE “REGISTRANT”)

(COMMISSION FILE NO. 0-13355)

EXHIBIT INDEX

TO

FORM 6-K

DATED MAY 10, 2007

Exhibit No.	Exhibit Description	Filed Herewith
99.1	ASM International N.V. Receives Multi-System Order from Leading DRAM Memory Manufacturer for Eagle® PECVD Systems	X

EX-99.1

Exhibit 99.1

ASM International N.V.

ASM International N.V. Receives Multi-System Order from Leading

DRAM Memory Manufacturer for Eagle^® PECVD Systems

BILTHOVEN, The Netherlands – May 9, 2007—ASM International N.V. (NASDAQ: ASMI and Euronext Amsterdam: ASM) today announced that its subsidiary, ASM Japan K.K., received an order for multiple Eagle^®12 systems from a leading Taiwanese DRAM manufacturer. The Eagle^® PECVD systems will be used in the deposition of thin film dielectric layers. Shipment to the customer’s facilities is scheduled for the second and third quarters of 2007.

“The Eagle^®12 has proven to be a reliable workhorse in Logic and Memory production lines, and with its low maintenance frequency and short maintenance time, the Eagle^®12 offers a high level of customer satisfaction,” said Tominori Yoshida, ASM’s PECVD Business Unit Manager. “The single wafer chambers of the Eagle^®12 ensure optimum process control, resulting in superior thin film uniformity, thus higher yielding wafers. The unique chamber design enables high uptime at low running cost, which is greatly valued by DRAM manufacturers in this cost-driven industry.”

About ASM International

ASM International N.V. and its subsidiaries design and manufacture equipment and materials used to produce semiconductor devices. The company provides production solutions for wafer processing (Front-end segment) as well as assembly and packaging (Back-end segment) through facilities in the United States, Europe, Japan and Asia. ASM International’s common stock trades on NASDAQ (symbol ASMI) and the Euronext Amsterdam Stock Exchange (symbol ASM). For more information, visit ASMI’s web site at www.asm.com.

Safe Harbor Statement under the U.S. Private Securities Litigation Reform Act of 1995: All matters discussed in this statement, except for any historical data, are forward-looking statements. Forward-looking statements involve risks and uncertainties that could cause actual results to differ materially from those in the forward-looking statements. These include, but are not limited to, economic conditions and trends in the semiconductor industry generally and the timing of the industry cycles specifically, currency fluctuations, the timing of significant orders, market acceptance of new products, competitive factors, litigation involving intellectual property, shareholder and other issues, commercial and economic disruption due to natural disasters, terrorist activity, armed conflict or political instability, epidemics, and other risks indicated in the Company’s filings from time to time with the U.S. Securities and Exchange Commission, including, but not limited to, the Company’s reports on

ASM International N.V. Receives Multiple Orders from Leading Flash Memory Manufacturer for Dragon^® PECVD Systems

Form 20-F and Form 6-K. The Company assumes no obligation nor intends to update or revise any forward-looking statements to reflect future developments or circumstances.

Contacts:

Mary Jo Dieckhaus

Investor Relations

+1 212-986-2900

MaryJo.Dieckhaus@asm.com

Willem Vermeulen

Corporate Marketing

+31 (0)30-229-8551

Willem.Vermeulen@asm.com