UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM
CURRENT REPORT
Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
Date of Report (Date of earliest event reported): |
(Exact name of Registrant as Specified in Its Charter)
(State or Other Jurisdiction |
(Commission File Number) |
(IRS Employer |
||
|
|
|
|
|
|
||||
|
||||
(Address of Principal Executive Offices) |
|
(Zip Code) |
Registrant’s Telephone Number, Including Area Code: |
(Former Name or Former Address, if Changed Since Last Report)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
Securities registered pursuant to Section 12(b) of the Act:
|
|
Trading |
|
|
|
|
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§ 230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§ 240.12b-2 of this chapter).
Emerging growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Item 8.01 Other Events.
Risk Factors
Corbus Pharmaceuticals Holdings, Inc. (the “Company”) is including the below update to its risk factors, for the purpose of supplementing and updating the disclosure contained in its Annual Report on Form 10-K for the fiscal year ended December 31, 2023, filed with the Securities and Exchange Commission (the “SEC”) on March 12, 2024 (as amended on March 20, 2024) and its Quarterly Report on Form 10-Q for the period ended March 31, 2024, filed with the SEC on May 7, 2024.
We are, and will be, completely dependent on third parties to manufacture our drug candidates, and our commercialization of our drug candidates could be halted, delayed or made less profitable if those third parties fail to obtain manufacturing approval from the FDA or comparable foreign regulatory authorities, fail to provide us with sufficient quantities of our drug candidates or fail to do so at acceptable quality levels or prices.
We do not currently have, nor do we plan to acquire, the capability or infrastructure to manufacture the active pharmaceutical ingredients of our drug candidates, or the finished drug products, for use in our clinical trials or for commercial product, if any. As a result, we will be obligated to rely on contract manufacturers if and when our drug candidates are approved for commercialization.
We currently rely on contract suppliers for the manufacturing of our drug candidates. We have limited experience contracting third parties to manufacture our drug candidates and we do not control the manufacturing processes of, and are completely dependent on, our contract manufacturing partners for compliance with cGMPs for manufacture of all active drug substances and finished drug products. These cGMP regulations cover all aspects of the manufacturing, testing, quality control and record keeping relating to our drug candidates. If our contract manufacturers cannot successfully manufacture material that conforms to our specifications and the strict regulatory requirements of the FDA or others, they will not be able to secure and/or maintain regulatory approval for their manufacturing facilities. If the FDA or a comparable foreign regulatory authority does not approve these facilities for the manufacture of our product candidates or if it withdraws any such approval in the future, we may need to find alternative manufacturing facilities, which would significantly impact our ability to develop, obtain regulatory approval for or market our drug candidates, if approved.
Our contract manufacturers will be subject to ongoing periodic unannounced inspections by the FDA and corresponding state and foreign agencies for compliance with cGMPs and similar regulatory requirements. We will not have control over our contract manufacturers’ compliance with these regulations and standards. Failure by any of our contract manufacturers to comply with applicable regulations could result in sanctions being imposed on us, including fines, injunctions, civil penalties, failure to grant approval to market our drug candidates, delays, suspensions or withdrawals of approvals, operating restrictions and criminal prosecutions, any of which could significantly and adversely affect our business. In addition, we will not have control over the ability of our contract manufacturers to maintain adequate quality control, quality assurance and qualified personnel. Failure by our contract manufacturers to comply with or maintain any of these standards could adversely affect our ability to develop, obtain regulatory approval for or market our drug candidates.
If, for any reason, these third parties are unable or unwilling to perform, we may not be able to terminate our agreements with them, and we may not be able to locate alternative manufacturers or formulators or enter into favorable agreements with them and we cannot be certain that any such third parties will have the manufacturing capacity to meet future requirements. If these manufacturers or any alternate manufacturer of finished drug product experiences any significant difficulties in its respective manufacturing processes for our active pharmaceutical ingredient, or API, or our finished products or should cease doing business with us, we could experience significant interruptions in the supply of our drug candidates or may not be able to create a supply of our drug candidates at all. Were we to encounter manufacturing issues, our ability to produce a sufficient supply of our drug candidates might be negatively affected. Our inability to coordinate the efforts of our third-party manufacturing partners, or the lack of capacity available at our third-party manufacturing partners, could impair our ability to supply our drug candidates at required levels. Because of the significant regulatory requirements that we would need to satisfy in order to qualify a new bulk or finished product manufacturer, if we face these or other difficulties with our current manufacturing partners, we could experience significant interruptions in the supply of our drug candidates if we decided to transfer the manufacture of our drug candidates to one or more alternative manufacturers in an effort to deal with the difficulties.
-1-
In addition, we currently rely on foreign third parties to manufacture certain materials used in clinical trials of our product candidates or to provide services in connection with certain clinical trials and will likely continue to rely on foreign third parties in the future. Foreign third parties may be subject to U.S. legislation, including the proposed BIOSECURE bill, trade restrictions and other foreign regulatory requirements. Any manufacturing problem or the loss of a contract manufacturer could be disruptive to our operations and result in lost sales. Additionally, we rely on third parties to supply the raw materials needed to manufacture our potential products. Any reliance on suppliers may involve several risks, including a potential inability to obtain critical materials and reduced control over production costs, delivery schedules, reliability, and quality. Any unanticipated disruption to a future contract manufacturer caused by problems at suppliers could delay shipment of our drug candidates, increase our cost of goods sold and result in lost sales.
We cannot guarantee that our manufacturing and supply partners will be able to manufacture our drug candidates at commercial scale on a cost-effective basis. If the commercial-scale manufacturing costs of our drug candidates are higher than expected, these costs may significantly impact our operating results. In order to reduce costs, we may need to develop and implement process improvements. However, in order to do so, we will need, from time to time, to notify or make submissions with regulatory authorities, and the improvements may be subject to approval by such regulatory authorities. We cannot be sure that we will receive these necessary approvals or that these approvals will be granted in a timely fashion. We also cannot guarantee that we will be able to enhance and optimize output in our commercial manufacturing process. If we cannot enhance and optimize output, we may not be able to reduce our costs over time.
We expect that we will rely on third parties to assist us in conducting clinical trials for our drug candidates. If these third parties do not successfully carry out their contractual duties or meet expected deadlines, we may not be able to obtain regulatory approval for or commercialize our drug candidates and our business would be substantially harmed.
We expect to enter into agreements with third-party CROs to assist us in conducting and managing our clinical programs, including contracting with clinical sites to perform our clinical studies. We plan to rely on these parties for execution of clinical studies for our drug candidates and we will control only certain aspects of conducting the clinical studies. Nevertheless, we will be responsible for ensuring that each of our studies is conducted in accordance with the applicable protocol, legal, regulatory and scientific standards, and our reliance on CROs and clinical sites will not relieve us of our regulatory responsibilities. We and our CROs will be required to comply with cGCPs, which are regulations and guidelines enforced by the FDA, the Competent Authorities of the Member States of the European Economic Area and comparable foreign regulatory authorities for any products in clinical development. The FDA enforces these cGCP regulations through periodic inspections of trial sponsors, principal investigators and trial sites. If we or our CROs fail to comply with applicable cGCPs, the clinical data generated in our clinical trials may be deemed unreliable and the FDA or comparable foreign regulatory authorities may require us to perform additional clinical trials before approving our marketing applications. We cannot assure you that, upon inspection, the FDA will determine that any of our clinical trials comply with cGCPs. In addition, our clinical trials must be conducted with products produced under cGMP regulations and will require a large number of test subjects. Our failure or the failure of our CROs or clinical sites to comply with these regulations may require us to repeat clinical trials, which would delay the regulatory approval process and could also subject us to enforcement action up to and including civil and criminal penalties.
Although we intend to design the clinical trials for our drug candidates in consultation with CROs, we expect that the CROs will manage and assist us with the clinical trials conducted at contracted clinical sites. As a result, many important aspects of our drug development programs would be outside of our direct control. In addition, the CROs and clinical sites may not perform all of their obligations under arrangements with us or in compliance with regulatory requirements. If the CROs or clinical sites do not perform clinical trials in a satisfactory manner, or if they breach their obligations to us or fail to comply with regulatory requirements, the development and commercialization of our drug candidates for the subject indications may be delayed or our development program materially and irreversibly harmed. We cannot control the amount and timing of resources these CROs and clinical sites will devote to our program or our drug candidates. If we are unable to rely on clinical data collected by our CROs, we could be required to repeat, extend the duration of, or increase the size of our clinical trials, which could significantly delay commercialization and require significantly greater expenditures.
In addition, we currently rely on foreign CROs to manufacture certain materials used in clinical trials of our product candidates or to provide services in connection with certain clinical trials and will likely continue to rely on foreign CROs in the future. Foreign CROs may be subject to U.S. legislation, including the proposed BIOSECURE bill, trade restrictions and other foreign regulatory requirements. If any of our relationships with these third-party CROs or clinical sites terminate, we may not be able to enter into arrangements with alternative CROs or clinical sites. If CROs do not successfully carry out their contractual duties or obligations or meet expected deadlines, if they need to be replaced or if the quality or accuracy of the clinical data they obtain is compromised due to the failure to adhere to our clinical protocols, regulatory requirements or for other reasons, any such clinical trials may be extended, delayed or terminated, and we may not be able to obtain regulatory approval for or successfully commercialize our drug candidates. As a result, our financial results and the commercial prospects for our drug candidates would be harmed, our costs could increase and our ability to generate revenue could be delayed.
-2-
Changes in geopolitical conditions, U.S.-China trade relations and other factors beyond our control may adversely impact our business and operating results.
Our operations and performance depend, in part, on global and regional economic and geopolitical conditions, given our current third-party license agreement with CSPC, which is headquartered in China. Changes in U.S.-China trade policies, including the proposed BIOSECURE bill, and a number of other economic and geopolitical factors both in China and abroad could have a material adverse effect on our business, financial condition, results of operations or prospects. Such factors may include:
As a result of these events, our ability to obtain data or regulatory support from our China-based licensing partner may be limited or adversely affected, and we may ourselves be subject to sanctions, diminished public perception and operational constraints.
Our product candidates may infringe the intellectual property rights of others, which could increase our costs and delay or prevent our development and commercialization efforts.
Our success depends in part on avoiding infringement of the proprietary technologies of others. The pharmaceutical industry has been characterized by frequent litigation regarding patent and other intellectual property rights. Identification of third-party patent rights that may be relevant to our proprietary technology is difficult because patent searching is imperfect due to differences in terminology among patents, incomplete databases, and the difficulty in assessing the meaning of patent claims. Additionally, because patent applications are maintained in secrecy until the application is published, we may be unaware of third-party patents that may be infringed by any of our product candidates. There may be certain issued patents and patent applications claiming subject matter that we may be required to license in order to research, develop or commercialize our product candidates, and we do not know if such patents and patent applications would be available to license on commercially reasonable terms, or at all. Any claims of patent infringement asserted by third parties would be time-consuming and may:
Although no third party has asserted a claim of infringement against us, others may hold proprietary rights that could prevent our product candidates from being marketed. We are aware of patents or patent applications owned by third parties that relate to some aspects of our programs that are still in development. In some cases, because we have not determined the final methods of manufacture, the method of administration or the therapeutic compositions for these programs, we cannot determine whether rights under such third-party positions will be needed. In addition, in some cases, we believe that the claims of these patents are invalid or not infringed or will expire before commercialization. However, if such patents are needed and found to be valid and infringed, we could be required to obtain licenses, which might not be available on commercially reasonable terms, or to cease or delay commercializing certain product candidates, or to change our programs to avoid infringement. Any patent-related legal action against us claiming damages and seeking to enjoin commercial activities relating to our product candidates or our processes could subject us to potential liability for damages and require us to obtain a license to continue to manufacture or market our product candidates. We cannot predict whether we would prevail in any such actions or that any license required under any of these patents would be made available on commercially acceptable terms, if at all. In addition, we cannot be sure that we could redesign any product candidates or processes to avoid infringement, if necessary. Accordingly, an adverse determination in a judicial or administrative proceeding, or the failure to obtain necessary licenses, could prevent us from developing and commercializing our product candidates, which could harm our business, financial condition, and operating results.
-3-
A number of companies, including several major pharmaceutical companies, have conducted research in the same therapeutic areas as our company, which resulted in the filing of many patent applications in the same areas as our research. If we were to challenge the validity of these or any issued U.S. patent in court, we would need to overcome a statutory presumption of validity that attaches to every issued U.S. patent. This means that, in order to prevail, we would have to present clear and convincing evidence as to the invalidity of the patent’s claims.
If we were to challenge the validity of these or any issued U.S. patent in an administrative trial before the Patent Trial and Appeal Board in the U.S. Patent and Trademark Office, we would have to prove that the claims are unpatentable by a preponderance of the evidence. There is no assurance that a jury and/or court would find in our favor on questions of infringement, validity, or enforceability.
-4-
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
|
|
|
Corbus Pharmaceuticals Holdings, Inc. |
|
|
|
|
Date: |
May 9, 2024 |
By: |
/s/ Yuval Cohen |
|
|
|
Name: Yuval Cohen |
-5-
Document And Entity Information |
May 09, 2024 |
---|---|
Cover [Abstract] | |
Document Type | 8-K |
Amendment Flag | false |
Document Period End Date | May 09, 2024 |
Entity Registrant Name | CORBUS PHARMACEUTICALS HOLDINGS, INC. |
Entity Central Index Key | 0001595097 |
Entity Emerging Growth Company | false |
Entity File Number | 001-37348 |
Entity Incorporation, State or Country Code | DE |
Entity Tax Identification Number | 46-4348039 |
Entity Address, Address Line One | 500 River Ridge Drive |
Entity Address, City or Town | Norwood |
Entity Address, State or Province | MA |
Entity Address, Postal Zip Code | 02062 |
City Area Code | (617) |
Local Phone Number | 963-0100 |
Entity Information, Former Legal or Registered Name | Not Applicable |
Written Communications | false |
Soliciting Material | false |
Pre-commencement Tender Offer | false |
Pre-commencement Issuer Tender Offer | false |
Title of 12(b) Security | Common Stock, par value $0.0001 per share |
Trading Symbol | CRBP |
Security Exchange Name | NONE |
-8?20$3;
M8T.P6BP^0"X99K>]9!:G