10-Q

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 10-Q

X .	Quarterly Report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
	For the quarterly period ended January 31, 2016
.	Transition Report pursuant to 13 or 15(d) of the Securities Exchange Act of 1934
	For the transition period from to __________
	Commission File Number: 333-157783

3D MakerJet, Inc.

(Exact name of registrant as specified in its charter)

Nevada	26-4083754
(State or other jurisdiction of incorporation or organization)	(IRS Employer Identification No.)

4303 Vineland Road, F2, Orlando, FL 32811

(Address of principal executive offices)

(407) 930-0807

(Registrant’s telephone number)

_______________________________________________________________

(Former name, former address and former fiscal year, if changed since last report)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days  . Yes   X . No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  X . Yes  . No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  

 . Large accelerated filer  . Non-accelerated filer  . Accelerated filer   X . Smaller reporting company

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).   . Yes   X . No

State the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: 130,200,000 common shares as of March 11, 2016.

	TABLE OF CONTENTS	Page
PART I – FINANCIAL INFORMATION
Item 1:	Financial Statements	3
Item 2:	Management’s Discussion and Analysis of Financial Condition and Results of Operations	10
Item 3:	Quantitative and Qualitative Disclosures About Market Risk	14
Item 4:	Controls and Procedures	14
PART II – OTHER INFORMATION
Item 1:	Legal Proceedings	15
Item 2:	Unregistered Sales of Equity Securities and Use of Proceeds	15
Item 3:	Defaults Upon Senior Securities	15
Item 4:	Mine Safety Disclosure	15
Item 5:	Other Information	15
Item 6:	Exhibits	15

2

PART I -FINANCIAL INFORMATION

Item 1. Financial Statements

Our consolidated financial statements included in this Form 10-Q are as follows:

Consolidated Balance Sheets as of January 31, 2016 and July 31, 2015(unaudited)	3
Consolidated Statements of Operations for the three and six months ended January 31, 2016 and 2015 (unaudited)	4
Consolidated Statements of Cash flows for the six months ended January 31, 2016 and 2015 (unaudited)	5
Notes to Consolidated Financial Statements	6

These consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America for interim financial information and the SEC instructions to Form 10-Q. In the opinion of management, all adjustments considered necessary for a fair presentation have been included. Operating results for the interim period ended January 31, 2016 are not necessarily indicative of the results that can be expected for the full year.

3

3D MAKERJET, INC.

CONSOLIDATED BALANCE SHEETS

AS OF JANUARY 31, 2016 AND JULY 31, 2015

(UNAUDITED)

ASSETS		January 31, 2016		July 31,2015
Current Assets:
Cash	$	663	$	14,288
Inventory		50,600		54,520
Total current assets		51,264		68,808
Equipment, net of accumulated depreciation of $24,759 and $19,610, respectively		5,148		10,297
Prepaid expenses and other assets		7,234		7,234
Total Assets	$	63,646	$	86,339
LIABILITIES AND STOCKHOLDERS' DEFICIT
Current Liabilities:
Accounts payable and accrued liabilities	$	232,227	$	119,672
Convertible notes payable, net of discount of $172,485 and $218,708, respectively		602,693		297,966
Total Current Liabilities		834,920		417,638
Long-term Liabilities:
Convertible notes payable, net of discount of $0 and $61,002, respectively		-		61,002
Notes payable		43,000		43,000
Total Liabilities		877,920		521,640
Stockholders' Deficit:
Preferred stock; $0.001 par value; 10,000,000 shares authorized; none issued or  outstanding		-		-
Common stock; $0.001 par value; 300,000,000 shares authorized; 130,200,000 and 291,200,000 shares issued and outstanding at January 31, 2016 and July 31, 2015, respectively		130,200		291,200
Additional paid-in capital		780,659		271,039
Accumulated deficit		(1,725,134)		(997,540)
Total Stockholders' Deficit		(814,275)		(435,301)
Total Liabilities and Stockholders' Deficit	$	63,646	$	86,339

See accompanying notes to the financial statements.

4

3D MAKERJET, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

FOR THE THREE AND SIX MONTH PERIODS ENDED JANUARY 31, 2016 AND 2015

(UNAUDITED)

		Three Months Ended January 31,				Six Months Ended January 31,
		2016		2015		2016		2015
REVENUES	$	-	$	25,868	$	12,000	$	31,863
COST OF REVENUES		1,481		10,642		3,920		10,642
GROSS PROFIT		(1,481)		15,226		8,080		21,221
OPERATING EXPENSES:
General and administrative		299,872		17,278		322,066		50,481
Compensation		36,586		34,689		73,050		90,573
Professional fees		51,741		76,118		110,246		108,673
TOTAL OPERATING EXPENSES		388,199		128,085		505,362		249,727
LOSS FROM OPERATIONS		(389,680)		(112,859)		(497,282)		(228,506)
OTHER INCOME (EXPENSE)
Interest expense		(116,414)		(129,798)		(230,311)		(211,751)
PROVISION FOR INCOME TAXES		-		-		-		-
NET INCOME (LOSS)	$	(506,094)	$	(242,657)	$	(727,593)	$	(440,257)
NET INCOME (LOSS) PER SHARE: BASIC AND DILUTED	$	-	$	-	$	-	$	-
WEIGHTED AVERAGE NUMBER OF SHARES OUTSTANDING: BASIC AND DILUTED		130,134,783		289,787,049		207,163,043		277,493,662

See accompanying notes to the financial statements.

5

3D MAKERJET, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE SIX MONTHS ENDED JANUARY 31, 2016 AND 2015

(UNAUDITED)

		Six Months Ended January 31,
		2016		2015
Operating Activities
Net loss	$	(727,593)	$	(440,257)
Adjustments to reconcile net loss to net cash used in operating activities:
Amortization of debt discount		175,844		181,277
Depreciation & amortization expense		5,149		6,889
Share based compensation		280,000		-
Changes in operating assets and liabilities:
Inventory		3,920		8,168
Accounts payable and accrued liabilities		112,555		40,801
Net Cash Used in Operating Activities		(150,125)		(203,122)
Investing Activities
Cash received from acquisition of 3D MakerJet Asia		-		1,156
Net Cash Used in Investing Activities		-		1,156
Financing Activities
Proceeds from related party		-		986
Proceeds from convertible debt		136,500		187,500
Net Cash Provided by Financing Activities		136,500		188,486
Net Increase (Decrease) in Cash		(13,625)		(13,480)
Cash at Beginning of Period		14,288		19,923
Cash at End of Period	$	663	$	6,443
Supplemental Cash Flow Information:
Interest paid	$	-	$	-
Income taxes paid	$	-	$	-
Non-Cash Financing Transactions:
Acquisition of 3D MakerJet Asia with common stock, net of cash received	$	-	$	40,157
Discount on convertible promissory notes due to beneficial conversion feature	$	87,583	$	187,500

See accompanying notes to the financial statements.

6

3D MAKERJET, INC.

NOTES TO THE FINANCIAL STATEMENTS JANUARY 31, 2016

(UNAUDITED)

NOTE 1 - ORGANIZATION, BASIS OF ACCOUNTING AND SIGNIFICANT ACCOUNTING POLICIES

3D MakerJet, Inc. (the Company) was incorporated under the laws of the State of Nevada on January 12, 2009. The Company is developing a business plan focused on the sale of 3D printers, scanners, and ancillary equipment.

The accompanying unaudited interim financial statements and related notes have been prepared in accordance with accounting principles generally accepted in the United States of America ("U.S. GAAP") for interim financial information, and with the rules and regulations of the United States Securities and Exchange Commission set forth in Article 8 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by U.S. GAAP for complete financial statements. The unaudited interim financial statements furnished reflect all adjustments (consisting of normal recurring accruals) which are, in the opinion of management, necessary to a fair statement of the results for the interim periods presented. Unaudited interim results are not necessarily indicative of the results for the full fiscal year. These financial statements should be read in conjunction with the financial statements of the Company for the fiscal year ended July 31, 2015 and notes thereto contained in the Company's Annual Report on Form 10-K.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Commitments and Contingencies

Liabilities for loss contingencies arising from claims, assessments, litigation, fines and penalties, and other sources are recorded when it is probable that a liability has been incurred and the amount of the assessment can be reasonably estimated.

Net Loss Per Common Share

Net loss per common share is computed pursuant to section 260-10-45 of the FASB Accounting Standards Codification. Basic net loss per share is computed by dividing net loss by the weighted average number of shares of common stock outstanding during the period. Diluted net loss per share is computed by dividing net loss by the weighted average number of shares of common stock and potentially outstanding shares of common stock during each period. There were no potentially dilutive shares outstanding as of January 31, 2016 or July 31, 2015. As the Company has incurred losses for all periods, the impact of the common stock equivalents would be antidilutive, and therefore, are not included in the calculation.

New Accounting Standards

In April 2015, the FASB issued ASU No. 2015-03, Interest - Imputation of Interest (Subtopic 835-30) - Simplifying the Presentation of Debt Issuance Costs. ASU 2015-03 amends previous guidance to require that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The recognition and measurement guidance for debt issuance costs are not affected by the amendments in this ASU. The standard is effective for financial statements issued for fiscal years beginning after December 15, 2015, and interim periods within those fiscal years. Early adoption is permitted for financial statements that have not been previously issued. The Company did not have any debt issuance costs by the end of its first quarter for fiscal year 2016, but plans to adopt ASU No. 2015-03 regarding the presentation of debt issuance costs for fiscal year 2016.

Subsequent Events

The Company follows the guidance in Section 855-10-50 of the FASB Accounting Standards Codification for the disclosure of subsequent events. The Company evaluates subsequent events from the date of the balance sheet through the date when the financial statements are issued. Pursuant to ASU 2010-09 of the FASB Accounting Standards Codification, the Company as an SEC filer considers its financial statements issued when they are widely distributed to users, such as through filing them with the SEC on EDGAR system.

7

NOTE 2 -GOING CONCERN

The Company was formed in January 2009. It has incurred cumulative losses since inception, has a negative working capital of $783,656 and an accumulated deficit of $1,725,134 at January 31, 2016, and has had recurring negative cash flows from operations. While the Company is attempting to raise both debt and equity capital, expand operations and produce revenues, the Company's cash position may not be significant enough to support the Company's daily operations. Management intends to seek funds from outside business contacts as needed. There can be no assurances to that its business plan will succeed. Accordingly, there is doubt that the Company will be able to realize its assets and liquidate its liabilities in the normal course of business operations.

The ability of the Company to continue as a going concern is dependent upon the Company's ability to further implement its business plan and generate revenues. The financial statements do not include any adjustments that might be necessary if the Company is unable to continue as a going concern.

NOTE 3 - CONVERTIBLE PROMISSORY NOTES

On various dates from May 28, 2014 through January 31, 2016, the Company issued convertible promissory notes totaling $775,178, including $275,631 to an employee. Of this amount, $399,500, including $62,000 from the acquisition of 3D MakerJet Asia was recorded during the year ended July 31, 2015, and $136,500, was recorded during the three months ended January 31, 2016. At the time of issuance, the notes were evaluated and were determined to contain a beneficial conversion feature. As a result, a discount on convertible promissory notes totaling $601,395, including $207,258 to the employee, was recorded with a corresponding credit to additional paid-in capital. Accumulated discount amortization as of January 31, 2016 amounted to $428,910.

Description		Balance  January 31, 2016		Balance  July 31, 2015
48 convertible promissory notes, in amounts ranging from $2,500 to $131,631, all maturing within one year, bearing interest at 15% per annum, convertible into common stock at the conversion price of $0.001 per share	$	775,178	$	638,678
Original beneficial conversion feature discount		(601,395)		(532,775)
Discount amortization		428,910		253,065
Unamortized discount		(172,485)		(279,710)
Net	$	602,693	$	358,968

 Presented in the balance sheet as:

Description		Balance January 31, 2016		Balance July 31, 2015
Short-term	$	602,693	$	297,966
Long-term		-		61,002
Total	$	602,693	$	358,968

8

NOTE 4 - STOCKHOLDERS' DEFICIT

On September 30, 2014, our board of directors and majority shareholder approved a twenty-six for one (26: 1) forward split of our issued and outstanding common stock. The total number of authorized shares was not changed. All share and per share information has been retroactively adjusted to reflect the reverse stock split in the financial statements and in the notes to the financial statements for all periods presented, to reflect the reverse stock split as if it occurred at beginning of the comparable year.

On October 30, 2015, the Company’s majority shareholder, Market Milestones, Inc., cancelled 161,200,000 shares of common stock that it owned in the Company.  Market Milestones continues to own a majority of the Company’s issued and outstanding shares of common stock.

On December 2, 2015, we issued 200,000 shares of our common stock in consideration for consulting services provided by EGM Firm, Inc. The company recorded increases totaling $200 to capital stock, $279,800 towards additional paid-in capital.  

On various dates, during the six month period ended January 31, 2016, the Company recorded increases totaling $68,620 to additional paid-in capital related to beneficial conversion features on convertible promissory notes.

NOTE 5 - SUBSEQUENT EVENTS

The Company has evaluated all events that occurred after the balance sheet date of January 31, 2016 through March 11, 2016, the date when the financial statements were issued, and identified the following reportable subsequent event:

Subsequent to the end of the period, the Company issued convertible promissory notes totaling $36,000. The notes mature within one year, carry interest at 15%, and are convertible into the common stock of the Company at a conversion price of $0.001 per share.

9

Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations

Forward-Looking Statements

Certain statements, other than purely historical information, including estimates, projections, statements relating to our business plans, objectives, and expected operating results, and the assumptions upon which those statements are based, are "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. These forward-looking statements generally are identified by the words ''believes," ''project," "expects," "anticipates," "estimates," "intends," "strategy," ''plan," ''may," ''will," ''would," ''will be," "will continue," "will likely result,” and similar expressions. We intend such forward-looking statements to be covered by the safe-harbor provisions for forward-looking statements contained in the Private Securities Litigation Reform Act of 1995, and are including this statement for purposes of complying with those safe-harbor provisions. Forward-looking statements are based on current expectations and assumptions that are subject to risks and uncertainties which may cause actual results to differ materially from the forward-looking statements. Our ability to predict results or the actual effect of future plans or strategies is inherently uncertain. Factors which could have a material adverse effect on our operations and future prospects on a consolidated basis include, but are not limited to: changes in economic conditions, legislative/regulatory changes, availability of capital, interest rates, competition, and generally accepted accounting principles. These risks and uncertainties should also be considered in evaluating forward-looking statements and undue reliance should not be placed on such statements. We undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise. Further information concerning our business, including additional factors that could materially affect our financial results, is included herein and in our other filings with the SEC.

Company Overview

We are a Nevada corporation based out of Orlando, Florida. We import and sell state of the art 3D printers, scanners, and ancillary equipment. Our mission is to provide individual and corporate customers with the most advanced and reliable cutting edge 3D printing technology in the most cost effective packages available in the marketplace at whatever level is appropriate for their needs. We want our business to be the "go to" vendor of 3D printers for individuals and businesses.

The 3D printing industry is in its very early stages but is already getting more press and generating more excitement than almost any other technological development of recent years. It is not often that a new idea is constantly described as moving the goalposts for the way we actually live our lives. Amidst all the press and the hype, the reality of what the technology is capable of and the speed of its improvement is breathtaking.

We are committed to supplying the best plastic, medical, culinary, and powderless metal 3D printers in the industry, and we are supplied by one of the largest and most experienced 3D printing research, development and manufacturing entities in the world. 3D MakerJet's research and development partner and manufacturer, ZBOT I Guangzhou DNSPOWER Design Co. LTD, was founded in 2000, and we believe is a leader in the 3D printing industry. A cutting-edge developer in the plastics and manufacturing sector, ZBOT won the coveted CDA National Design Award for its ZBOT 3D Printer, which is the platform of the 3D MakerJet printer line, making their 3D printer the only CDA winner at the Civilian level, reflecting the product's superior quality, as well as the manufacturer's comprehensive strength, commitment and capabilities.

10

Our 3D Printers

The 3D MakerJet Originator i1 is a state-of-the-art 3D printer that can utilize almost any of the currently manufactured plastic filaments supplied to the industry. It does, however, come with its own proprietary filament that we believe is head and shoulders above the rest in terms of quality and ease of use. The Originator's power feed system ensures smooth and continuous function and accurate and detailed reproduction. We believe the Originator outperforms almost any printer not only at its price point but those that cost twice as much. It is an advanced machine at an entry level price. The Originator il has print dimensions of 150xl50xl40mm and weighs only 8 kg. We also carry larger models capable of building bigger objects. The Originator i2 handles print dimensions of 250xl50x140mm. The Originator 35 has print dimensions of 250x250x350mm. The Originator 46 does 350x350x460mm in PLA only. The Originator 50 will print 500x500x500mm. The Originator Dl is smaller, even less expensive model designed for school and institutional use is available now.

Model	Originator D1	Originator i1	Originator i2	Originator 35	Originator 46	Originator 50
Print Dimensions	100 x 100 y 100 z	150 x 150 y 140 z mm	250 x 150 y 140 z mm	250 x 250 y 350 z mm	350 x 350 y 460 z mm	500 x 500 y 500 z mm
Overall Dimensions	L) 350 mm W) 340 mm H) 380 mm	L) 375 mm W) 370 mm H) 380 mm	L) 475 mm W) 270 mm H) 380 mm	L) 590 mm W) 522 mm H) 710 mm	L) 490 mm W) 420 mm H) 740 mm	L) 640 mm W) 570 mm H) 800 mm
Weight	13 kg	16.7 kg	18 kg	30 kg	44 kg	50 kg
Layer Thickness	0.1 - 0.5 m (Adjustable)	0.1 - 0.5 m (Adjustable)	0.1 - 0.5 m (Adjustable)	0.1 - 0.5 m (Adjustable)	0.1 - 0.5 m (Adjustable)	0.1 - 0.5 m (Adjustable)
Precision	±0.1mm - 100mm	±0.1mm - 100mm	±0.1mm - 100mm	±0.1mm - 100mm	±0.1mm - 100mm	±0.1mm - 100mm
Speed	30 - 100mm per second	30 - 100mm per second	30 - 100mm per second	25 - 250mm per second	25 - 200mm per second	25 - 200mm per second
Wattage	250 W	250 W	250 W	250 W	250 W	250 W
Nozzle Temperature	40℃ - 200℃ adjustable	40℃ - 250℃ adjustable	40℃ - 250℃ adjustable	40℃ - 250℃ adjustable	40℃ - 200℃ adjustable	40℃ - 200℃ adjustable
Power Supply	VAC 50/60hz 110V-220V	VAC 50/60hz 110V-220V	VAC 50/60hz 110V-220V	VAC 50/60hz 110V-220V	VAC 50/60hz 110V-220V	VAC 50/60hz 110V-220V
Material	PLA	ABS / PLA	ABS / PLA	ABS	PLA	PLA
Suggested Price	$349	$599	$899	$3,549	$3,999	$4,499

Originator i1 currently retails for $599 plus tax and shipping. All Originator i1 orders are fulfilled out of our warehouse facility at our corporate offices, located in Orlando, Florida. Shipping times and charges vary depending upon carrier chosen, but normal ground is 10-14 days.

Pipeline Products

Our research and development partner and manufacturer, ZBOT, has created two additional printers: the Candy Printer and the Powderless Metal Printer; and a full size scanner.

The Powderless Metal Printer is expected to be available for delivery by Fall 2016 and will be able to use various metal stocks and won't depend on the powdered alloys that so limit the effectiveness and scope of current metal printers. The preliminary size specifications for this new printer are expected to be approximately 3 feet tall, by 2 foot 6 inches wide.  Filaments in copper, lead and tin are being tested.  The Powderless Metal Printer will be able to be truck mounted, which will make it very desirable and useful in many industries such as electrical contracting, mining, and manufacturing.

The 3D MakerJet full size scanner is in our showroom and available for special order. This is a scanner capable of creating an image of a full grown human being or an object of equivalent size. This unit will come with its own standalone processor, display and proprietary software. Work on a hand sized small scanner is almost complete.

11

The new hand held Scanner HI is also now available for special order and will be offered at a price that will be very attractive compared to the few similar sized scanners on the market.

Recent Developments

Our Website

We launched a new interactive website complete with social media integration and daily live chat product support. We use two platforms currently -Facebook and Twitter- because it gives us the opportunity to share in the excitement and joy our customers are feeling when their ideas are made real. The same goes for support, so our customers get the most out of their 3D printing experience.

Our Showroom

We have opened a showroom and corporate offices in Orlando, Florida, in the center of the popular "imagine" capital of the United States. Located in the Quorum Center, our new showroom is strategically located in the exciting nexus of neighboring stalwarts such as Universal Studios® and Disney Resorts®.

The new 3D showroom fronts the home offices, warehousing and fulfillment center for the Company.

Results of Operations for the three and six months ended January 31, 2016 and 2015

Revenues

We have generated limited revenue since our inception. We have incurred losses since our inception. We do not expect to generate significant revenues until we successfully market and sell our 3D printers. As we are just introducing product into the market, we are not sure what future margins will be with our limited operating history.

Operating Expenses

Operating expenses increased to $388,199 for the three months ended January 31, 2016 from $128,085 for the three months ended January 31, 2015.  Our operating expenses for the three months ended January 31, 2016 consisted primarily of professional fees of $51,741, compensation of $36,586, contractor fees of $280,000, and office expenses of $19,872.  In comparison, our operating expenses for the three months ended January 31, 2015 consisted of general and administrative expenses in the amount of $17,278, professional fees in the amount of $76,118, and compensation of $34,689.

Operating expenses increased to $505,362 for the six months ended January 31, 2016 from $249,727 for the six months ended January 31, 2015.  Our operating expenses for the six months ended January 31, 2016 consisted primarily of professional fees of $110,246, compensation of $73,050, contractor fees of $280,000, and office expenses of $42,066.  In comparison, our operating expenses for the six months ended January 31, 2015 consisted of general and administrative expenses in the amount of $50,481, professional fees in the amount of $108,673, and compensation of $90,573.

We anticipate our operating expenses will increase as we undertake our plan of operations. The increase will be attributable to administrative and operating costs associated with our 3D printer related activities and the professional fees associated with our reporting obligations under the Securities Exchange Act of 1934.

Other Expenses

Other expenses decreased to $116,414 for the three months ended January 31, 2016 from other expenses of $129,798 for the three months ended January 31, 2015.Other expenses increased to $230,311for the six months ended January 31, 2016 from other expenses of $211,751 for the six months ended January 31, 2015.

Other expenses consisted entirely of interest expense for all periods. The increase is due to a number of convertible promissory notes issued from May 28, 2014 through January 31, 2016. We expect that our interest expenses will increase in future quarter from the convertible debt we have issued.

12

Net Loss

We incurred a net loss of $506,094 for the three months ended January 31, 2016, compared to net loss of $242,657 for the three months ended January 31, 2015.  We incurred a net loss of $727,593 for the six months ended January 31, 2016, compared to a net loss of $440,257 for the six months ended January 31, 2015.

Liquidity and Capital Resources

As of January 31, 2016, we had $51,264 in total current assets. We had current liabilities of $834,920 as of January 31, 2016. Accordingly, we had a working capital deficit of $783,656 as   of January 31, 2016.

Operating activities used $150,125 in cash for the six months ended January 31, 2016, as compared with $203,122 used for the six months ended January 31, 2015. Our negative operating cash flow for January 31, 2016 was mainly a result of our net loss for the period, offset by the effects of debt discount amortization, the share based compensation, along with an increase in accounts payable and accrued liabilities.

Investing activities for the six months ended January 31, 2016 provided $0 in cash, as compared with cash flows provided from investing activities of $1,156 for the six months ended January 31, 2015.

Financing activities for the three months ended January 31, 2016 generated $136,500 in cash, as compared with $188,486 for the six months ended January 31, 2015. Proceeds from financing activities consisted entirely of proceeds from convertible debt.

On various dates from May 28, 2014 through January 31, 2016, we issued convertible promissory notes totaling $775,178, including $275,631 to an employee. Subsequent to the reporting period, we issued convertible promissory notes totaling $36,000. All notes range from $2,500 to $131,631 in principal, mature within one to two years, bear interest at 15% per annum and convert into common stock at the conversion price of $0.001 per share.

Despite the money obtained in the form of short-term loans, the success of our business plan beyond the next 12 months is contingent upon us obtaining additional financing. We intend to fund operations through debt and/or equity financing arrangements, which may be insufficient to fund our capital expenditures, working capital, or other cash requirements. We do not have any formal commitments or arrangements for the sales of stock or the advancement or loan of funds at this time. There can be no assurance that such additional financing will be available to us on acceptable terms, or at all.

Going Concern

We were formed in January 2009. We have negative working capital of $783,656 and an accumulated deficit of $1,725,134 at January 31, 2016, and have had recurring negative cash flows from operations. While we are attempting to expand operations and produce revenues, our cash position may not be significant enough to support our daily operations. Management will seek funds from outside business contacts as needed. There can be no assurances that our business plan will succeed.

Our ability to continue as a going concern is dependent upon our ability to further implement our business plan and generate revenues. The financial statements do not include any adjustments that might be necessary if we are unable to continue as a going concern.

Critical Accounting Policies

In December 2001, the SEC requested that all registrants list their most "critical accounting polices" in the Management Discussion and Analysis. The SEC indicated that a "critical accounting policy" is one which is both important to the portrayal of a company's financial condition and results, and requires management's most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain. We do not believe that any accounting policies currently fit this definition.

Recently Issued Accounting Pronouncements

We do not expect the adoption of recently issued accounting pronouncements to have a significant impact on our results of operations, financial position or cash flow.

13

Off-Balance Sheet Arrangements

As of January 31, 2016, there were no off balance sheet arrangements.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

A smaller reporting company is not required to provide the information required by this Item.

Item 4. Controls and Procedures

Disclosure Controls and Procedures

We carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) as of January 31, 2016. This evaluation was carried out under the supervision and with the participation of our Chief Executive Officer and our Chief Financial Officer. Based upon that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of January 31, 2016, our disclosure controls and procedures were not effective due to the presence of material weaknesses in internal control over financial reporting.

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company's annual or interim financial statements will not be prevented or detected on a timely basis. Management has identified the following material weaknesses which have caused management to conclude that, as of January 31, 2016, our disclosure controls and procedures were not effective: (i) inadequate segregation of duties and effective risk assessment; and (ii) insufficient written policies and procedures for accounting and financial reporting with respect to the requirements and application of both US GAAP and SEC guidelines.

Remediation Plan to Address the Material Weaknesses in Internal Control over Financial Reporting

Our Company plans to take steps to enhance and improve the design of our internal controls over financial reporting. During the period covered by this quarterly report on Form 10-Q, we have not been able to remediate the material weaknesses identified above. To remediate such weaknesses, we plan to implement the following changes during our fiscal year ending July 31, 2016: (i) appoint additional qualified personnel to address inadequate segregation of duties and ineffective risk management; and (ii) adopt sufficient written policies and procedures for accounting and financial reporting. The remediation efforts set out are largely dependent upon our securing additional financing to cover the costs of implementing the changes required. If we are unsuccessful in securing such funds, remediation efforts may be adversely affected in a material manner.

We are unable to remedy our controls related to the inadequate segregation of duties and ineffective risk management until we receive financing to hire additional employees.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal control over financial reporting during the three months ended January 31, 2016 that have materially affected, or are reasonable likely to materially affect, our internal control over financial reporting.

Limitations on the Effectiveness of Internal Controls

Our management does not expect that our disclosure controls and procedures or our internal control over financial reporting will necessarily prevent all fraud and material error. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the internal control. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.

Over time, control may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate.

14

PART II- OTHER INFORMATION

Item 1. Legal Proceedings

We are not a party to any pending legal proceeding. We are not aware of any pending legal proceeding to which any of our officers, directors, or any beneficial holders of 5% or more of our voting securities are adverse to us or have a material interest adverse to us.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

On December 2, 2015, we issued 200,000 shares of our common stock in consideration for consulting services.

These securities were issued pursuant to Section 4(2) of the Securities Act and/or Rule 506 promulgated thereunder. The holders represented their intention to acquire the securities for investment only and not with a view towards distribution. The investors were given adequate information about us to make an informed investment decision. We did not engage in any general solicitation or advertising. We directed our transfer agent to issue the stock certificates with the appropriate restrictive legend affixed to the restricted stock.

Item 3. Defaults upon Senior Securities

None

Item 4. Mine Safety Disclosures

Not applicable.

Item 5. Other Information

None

Item 6. Exhibits

Exhibit Number	Description of Exhibit
31.1	Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2	Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1	Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101**	The following materials from the Company’s Quarterly Report on Form 10-Q for the quarter ended January 31, 2016 formatted in Extensible Business Reporting Language (XBRL).

**Provided herewith

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

3D MakerJet, Inc.

Date: March 15, 2016

By:

John Crippen

John Crippen

Title: Chief Executive Officer and Director

15

EX-31.1

CERTIFICATIONS

I, John Crippen, certify that;

1. I have reviewed this quarterly report on Form 10-Q for the quarter ended January 31, 2016 of 3D MakerJet, Inc. (the “registrant”);

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a. Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b. Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

c. Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d. Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a. All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b. Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: March 15, 2016

/s/ John Crippen

By: John Crippen

Title: Chief Executive Officer

EX-31.2

CERTIFICATIONS

I, Ed Thaney, certify that;

1. I have reviewed this quarterly report on Form 10-Q for the quarter ended January 31, 2016 of 3D MakerJet, Inc. (the “registrant”);

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a. Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b. Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

c. Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d. Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a. All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b. Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: March 15, 2016

/s/ Ed Thaney

By: Ed Thaney

Title: Chief Financial Officer

EX-32.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER AND

CHIEF FINANCIAL OFFICER

PURSUANT TO

18 U.S.C. SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the quarterly Report of 3D MakerJet, Inc. (the “Company”) on Form 10-Q for the quarter ended October 31, 2015 filed with the Securities and Exchange Commission (the “Report”), I, John Crippen, Chief Executive Officer of the Company, and I, Ed Thaney, Chief Financial Officer of the Company, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

1.

The Report fully complies with the requirements of Section 13(a) and 15(d) of the Securities Exchange Act of 1934; and

2.

The information contained in the Report fairly presents, in all material respects, the consolidated financial condition of the Company as of the dates presented and the consolidated result of operations of the Company for the periods presented.

By:	/s/ John Crippen
Name:	John Crippen
Title:	Principal Executive Officer, Principal Financial Officer and Director
Date:	March 15, 2016
By:	/s/ Ed Thaney
Name:	Ed Thaney
Title:	Principal Executive Officer, Principal Financial Officer and Director
Date:	March 15, 2016

This certification has been furnished solely pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

XML

Document and Entity Information - shares	6 Months Ended
	Jan. 31, 2016	Mar. 11, 2016
Document And Entity Information
Entity Registrant Name	3D Makerjet, Inc.
Entity Central Index Key	0001458023
Document Type	10-Q
Document Period End Date	Jan. 31, 2016
Amendment Flag	false
Current Fiscal Year End Date	--07-31
Is Entity a Well-known Seasoned Issuer?	No
Is Entity a Voluntary Filer?	No
Is Entity's Reporting Status Current?	No
Entity Filer Category	Smaller Reporting Company
Entity Common Stock, Shares Outstanding		130,200,000
Document Fiscal Period Focus	Q2
Document Fiscal Year Focus	2016

XML

Balance Sheets - USD ($)	Jan. 31, 2016	Jul. 31, 2015
Current Assets:
Cash	$ 663	$ 14,288
Inventory	50,600	54,520
Total current assets	51,264	68,808
Equipment, net of accumulated depreciation of $24,759 and $19,610, respectively	5,148	10,297
Prepaid expenses and other assets	7,234	7,234
Total Assets	63,646	86,339
Current Liabilities:
Accounts payable and accrued liabilities	232,227	119,672
Convertible notes payable, net of discount of $172,485 and $218,708, respectively	602,693	297,966
Total Current Liabilities	$ 834,920	417,638
Long-term Liabilities:
Convertible notes payable, net of discount of $0 and $61,002, respectively		61,002
Notes payable	$ 43,000	43,000
Total Liabilities	$ 877,920	$ 521,640
Stockholders' Deficit:
Preferred stock; $0.001 par value; 10,000,000 shares authorized; none issued or outstanding
Common stock; $0.001 par value; 300,000,000 shares authorized; 130,200,000 and 291,200,000 shares issued and outstanding at July 31, 2016 and July 31, 2015, respectively	$ 130,200	$ 291,200
Additional paid-in capital	780,659	271,039
Accumulated deficit	(1,725,134)	(997,540)
Total Stockholders' Deficit	(814,275)	(435,301)
Total Liabilities and Stockholders' Deficit	$ 63,646	$ 86,339

XML

Balance Sheets (Parenthetical) - USD ($)	Jan. 31, 2016	Jul. 31, 2015
Statement of Financial Position [Abstract]
Property and equipment, accumulated depreciation	$ 24,759	$ 19,610
Convertible notes payable, discount	172,485	218,708
Convertible notes payable, net of discount long-term	$ 0	$ 61,002
Preferred Stock, par value	$ 0.001	$ 0.001
Preferred Stock, shares authorized	10,000,000	10,000,000
Common Stock, par value	$ 0.001	$ 0.001
Common Stock, shares authorized	300,000,000	300,000,000
Common Stock, shares issued	130,200,000	291,200,000
Common Stock, shares outstanding	130,200,000	291,200,000

XML

Statements of Operations - USD ($)	3 Months Ended		6 Months Ended
	Jan. 31, 2016	Jan. 31, 2015	Jan. 31, 2016	Jan. 31, 2015
Income Statement [Abstract]
REVENUES		$ 25,868	$ 12,000	$ 31,863
COST OF REVENUES	$ 1,481	10,642	3,920	10,642
GROSS PROFIT	(1,481)	15,226	8,080	21,221
OPERATING EXPENSES
General and administrative	299,872	17,278	322,066	50,481
Compensation	36,586	34,689	73,050	90,573
Professional fees	51,741	76,118	110,246	108,673
TOTAL OPERATING EXPENSES	388,199	128,085	505,362	249,727
LOSS FROM OPERATIONS	(389,680)	(112,859)	(497,282)	(228,506)
OTHER INCOME (EXPENSE)
Interest expense	$ 116,414	$ 129,798	$ 230,311	$ 211,751
PROVISION FOR INCOME TAXES
NET INCOME (LOSS)	$ (506,094)	$ (242,657)	$ (727,593)	$ (440,257)
NET INCOME (LOSS) PER SHARE: BASIC AND DILUTED
WEIGHTED AVERAGE NUMBER OF SHARES OUTSTANDING :BASIC AND DILUTED	130,134,783	289,787,049	207,163,043	277,493,662

XML

Statements of Cash Flows - USD ($)	6 Months Ended
	Jan. 31, 2016	Jan. 31, 2015
Operating Activities:
Net loss	$ (727,593)	$ (440,257)
Adjustments to reconcile net loss to net cash used in operating activities:
Amortization of debt discount	175,844	181,277
Depreciation and amortization expense	5,149	$ 6,889
Share based compensation	280,000
Changes in operating assets and liabilities:
Inventory	3,920	$ 8,168
Accounts payable and accrued liabilities	112,555	40,801
Net Cash Used in Operating Activities	$ (150,125)	(203,122)
Cash received from acquisition of Makerjet Asia		1,156
Net cash used in investing activities		1,156
Financing Activities
Proceeds from a related party		986
Proceeds from convertible debt	$ 136,500	187,500
Net Cash Provided by Financing Activities	136,500	188,486
Net (Decrease) Increase in Cash	(13,625)	(13,480)
Cash at Beginning of Period	14,288	19,923
Cash at End of Period	$ 663	$ 6,443
Supplemental Cash Flow Information:
Interest paid
Income taxes paid
Non-Cash Financing Transactions:
Acquisition of MakerJet Asia with common stock, net of cash received		$ 40,157
Discount on convertible promissory notes due to beneficial conversion feature	$ 87,583	$ 187,500

XML

ORGANIZATION, BASIS OF ACCOUNTING AND SIGNIFICANT ACCOUNTING POLICIES

6 Months Ended

Jan. 31, 2016

ORGANIZATION, BASIS OF ACCOUNTING AND SIGNIFICANT ACCOUNTING POLICIES

ORGANIZATION, BASIS OF ACCOUNTING AND SIGNIFICANT ACCOUNTING POLICIES

NOTE 1 - ORGANIZATION, BASIS OF ACCOUNTING AND SIGNIFICANT ACCOUNTING POLICIES

3D MakerJet, Inc. (the Company) was incorporated under the laws of the State of Nevada on January 12, 2009. The Company is developing a business plan focused on the sale of 3D printers, scanners, and ancillary equipment.

The accompanying unaudited interim financial statements and related notes have been prepared in accordance with accounting principles generally accepted in the United States of America ("U.S. GAAP") for interim financial information, and with the rules and regulations of the United States Securities and Exchange Commission set forth in Article 8 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by U.S. GAAP for complete financial statements. The unaudited interim financial statements furnished reflect all adjustments (consisting of normal recurring accruals) which are, in the opinion of management, necessary to a fair statement of the results for the interim periods presented. Unaudited interim results are not necessarily indicative of the results for the full fiscal year. These financial statements should be read in conjunction with the financial statements of the Company for the fiscal year ended July 31, 2015 and notes thereto contained in the Company's Annual Report on Form 10-K.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Commitments and Contingencies

Liabilities for loss contingencies arising from claims, assessments, litigation, fines and penalties, and other sources are recorded when it is probable that a liability has been incurred and the amount of the assessment can be reasonably estimated.

Net Loss Per Common Share

Net loss per common share is computed pursuant to section 260-10-45 of the FASB Accounting Standards Codification. Basic net loss per share is computed by dividing net loss by the weighted average number of shares of common stock outstanding during the period. Diluted net loss per share is computed by dividing net loss by the weighted average number of shares of common stock and potentially outstanding shares of common stock during each period. There were no potentially dilutive shares outstanding as of January 31, 2016 or July 31, 2015. As the Company has incurred losses for all periods, the impact of the common stock equivalents would be antidilutive, and therefore, are not included in the calculation.

New Accounting Standards

In April 2015, the FASB issued ASU No. 2015-03, Interest - Imputation of Interest (Subtopic 835-30) - Simplifying the Presentation of Debt Issuance Costs. ASU 2015-03 amends previous guidance to require that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The recognition and measurement guidance for debt issuance costs are not affected by the amendments in this ASU. The standard is effective for financial statements issued for fiscal years beginning after December 15, 2015, and interim periods within those fiscal years. Early adoption is permitted for financial statements that have not been previously issued. The Company did not have any debt issuance costs by the end of its first quarter for fiscal year 2016, but plans to adopt ASU No. 2015-03 regarding the presentation of debt issuance costs for fiscal year 2016.

Subsequent Events

The Company follows the guidance in Section 855-10-50 of the FASB Accounting Standards Codification for the disclosure of subsequent events. The Company evaluates subsequent events from the date of the balance sheet through the date when the financial statements are issued. Pursuant to ASU 2010-09 of the FASB Accounting Standards Codification, the Company as an SEC filer considers its financial statements issued when they are widely distributed to users, such as through filing them with the SEC on EDGAR system.

XML

GOING CONCERN

6 Months Ended

Jan. 31, 2016

GOING CONCERN:

GOING CONCERN

NOTE 2 -GOING CONCERN

The Company was formed in January 2009. It has incurred cumulative losses since inception, has a negative working capital of $783,656 and an accumulated deficit of $1,725,134 at January 31, 2016, and has had recurring negative cash flows from operations. While the Company is attempting to raise both debt and equity capital, expand operations and produce revenues, the Company's cash position may not be significant enough to support the Company's daily operations. Management intends to seek funds from outside business contacts as needed. There can be no assurances to that its business plan will succeed. Accordingly, there is doubt that the Company will be able to realize its assets and liquidate its liabilities in the normal course of business operations.

The ability of the Company to continue as a going concern is dependent upon the Company's ability to further implement its business plan and generate revenues. The financial statements do not include any adjustments that might be necessary if the Company is unable to continue as a going concern.

XML

CONVERTIBLE PROMISSORY NOTES

6 Months Ended

Jan. 31, 2016

Debt Disclosure [Abstract]

CONVERTIBLE PROMISSORY NOTES

NOTE 3 - CONVERTIBLE PROMISSORY NOTES

On various dates from May 28, 2014 through January 31, 2016, the Company issued convertible promissory notes totaling $775,178, including $275,631 to an employee. Of this amount, $399,500, including $62,000 from the acquisition of 3D MakerJet Asia was recorded during the year ended July 31, 2015, and $136,500, was recorded during the three months ended January 31, 2016. At the time of issuance, the notes were evaluated and were determined to contain a beneficial conversion feature. As a result, a discount on convertible promissory notes totaling $601,395, including $207,258 to the employee, was recorded with a corresponding credit to additional paid-in capital. Accumulated discount amortization as of January 31, 2016 amounted to $428,910.

Description		Balance  January 31, 2016		Balance  July 31, 2015
48 convertible promissory notes, in amounts ranging from $2,500 to $131,631, all maturing within one year, bearing interest at 15% per annum, convertible into common stock at the conversion price of $0.001 per share	$	775,178	$	638,678
Original beneficial conversion feature discount		(601,395)		(532,775)
Discount amortization		428,910		253,065
Unamortized discount		(172,485)		(218,708)
Net	$	602,693	$	358,958

 Presented in the balance sheet as:

Description		Balance January 31, 2016		Balance July 31, 2015
Short-term	$	602,693	$	297,966
Long-term		-		61,002
Total	$	602,693	$	358,968

XML

STOCKHOLDERS' DEFICIT

6 Months Ended

Jan. 31, 2016

STOCKHOLDERS' DEFICIT

STOCKHOLDERS' DEFICIT

NOTE 4 - STOCKHOLDERS' DEFICIT

On September 30, 2014, our board of directors and majority shareholder approved a twenty-six for one (26: 1) forward split of our issued and outstanding common stock. The total number of authorized shares was not changed. All share and per share information has been retroactively adjusted to reflect the reverse stock split in the financial statements and in the notes to the financial statements for all periods presented, to reflect the reverse stock split as if it occurred at beginning of the comparable year.

On October 30, 2015, the Company’s majority shareholder, Market Milestones, Inc., cancelled 161,200,000 shares of common stock that it owned in the Company. Market Milestones continues to own a majority of the Company’s issued and outstanding shares of common stock.

On December 2, 2015, we issued 200,000 shares of our common stock in consideration for consulting services provided by EGM Firm, Inc. The company recorded increases totaling $200 to capital stock, $279,800 towards additional paid-in capital.

On various dates, during the six month period ended January 31, 2016, the Company recorded increases totaling $68,620 to additional paid-in capital related to beneficial conversion features on convertible promissory notes.

XML

SUBSEQUENT EVENTS

6 Months Ended

Jan. 31, 2016

SUBSEQUENT EVENTS

SUBSEQUENT EVENTS

NOTE 5 - SUBSEQUENT EVENTS

The Company has evaluated all events that occurred after the balance sheet date of January 31, 2016 through March 11, 2016, the date when the financial statements were issued, and identified the following reportable subsequent event:

Subsequent to the end of the period, the Company issued convertible promissory notes totaling $36,000. The notes mature within one year, carry interest at 15%, and are convertible into the common stock of the Company at a conversion price of $0.001 per share.

XML

ACCOUNTING POLICIES (Policies)

6 Months Ended

Jan. 31, 2016

ACCOUNTING POLICIES (Policies)

Accounting Basis

3D MakerJet, Inc. (the Company) was incorporated under the laws of the State of Nevada on January 12, 2009. The Company is developing a business plan focused on the sale of 3D printers, scanners, and ancillary equipment.

The accompanying unaudited interim financial statements and related notes have been prepared in accordance with accounting principles generally accepted in the United States of America ("U.S. GAAP") for interim financial information, and with the rules and regulations of the United States Securities and Exchange Commission set forth in Article 8 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by U.S. GAAP for complete financial statements. The unaudited interim financial statements furnished reflect all adjustments (consisting of normal recurring accruals) which are, in the opinion of management, necessary to a fair statement of the results for the interim periods presented. Unaudited interim results are not necessarily indicative of the results for the full fiscal year. These financial statements should be read in conjunction with the financial statements of the Company for the fiscal year ended July 31, 2015 and notes thereto contained in the Company's Annual Report on Form 10-K.

Use of Estimates

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Commitments and Contingencies

Commitments and Contingencies

Liabilities for loss contingencies arising from claims, assessments, litigation, fines and penalties, and other sources are recorded when it is probable that a liability has been incurred and the amount of the assessment can be reasonably estimated.

Net Loss Per Common Share

Net Loss Per Common Share

Net loss per common share is computed pursuant to section 260-10-45 of the FASB Accounting Standards Codification. Basic net loss per share is computed by dividing net loss by the weighted average number of shares of common stock outstanding during the period. Diluted net loss per share is computed by dividing net loss by the weighted average number of shares of common stock and potentially outstanding shares of common stock during each period. There were no potentially dilutive shares outstanding as of January 31, 2016 or July 31, 2015. As the Company has incurred losses for all periods, the impact of the common stock equivalents would be antidilutive, and therefore, are not included in the calculation.

New Accounting Standards

New Accounting Standards

In April 2015, the FASB issued ASU No. 2015-03, Interest - Imputation of Interest (Subtopic 835-30) - Simplifying the Presentation of Debt Issuance Costs. ASU 2015-03 amends previous guidance to require that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The recognition and measurement guidance for debt issuance costs are not affected by the amendments in this ASU. The standard is effective for financial statements issued for fiscal years beginning after December 15, 2015, and interim periods within those fiscal years. Early adoption is permitted for financial statements that have not been previously issued. The Company did not have any debt issuance costs by the end of its first quarter for fiscal year 2016, but plans to adopt ASU No. 2015-03 regarding the presentation of debt issuance costs for fiscal year 2016.

Subsequent Events

Subsequent Events

The Company follows the guidance in Section 855-10-50 of the FASB Accounting Standards Codification for the disclosure of subsequent events. The Company evaluates subsequent events from the date of the balance sheet through the date when the financial statements are issued. Pursuant to ASU 2010-09 of the FASB Accounting Standards Codification, the Company as an SEC filer considers its financial statements issued when they are widely distributed to users, such as through filing them with the SEC on EDGAR system.

XML

SCHEDULE CONVERTIBLE PROMISSORY NOTES (Tables)

6 Months Ended

Jan. 31, 2016

SCHEDULE CONVERTIBLE PROMISSORY NOTES

SCHEDULE CONVERTIBLE PROMISSORY NOTES

Description		Balance  January 31, 2016		Balance  July 31, 2015
48 convertible promissory notes, in amounts ranging from $2,500 to $131,631, all maturing within one year, bearing interest at 15% per annum, convertible into common stock at the conversion price of $0.001 per share	$	775,178	$	638,678
Original beneficial conversion feature discount		(601,395)		(532,775)
Discount amortization		428,910		253,065
Unamortized discount		(172,485)		(279,710)
Net	$	602,693	$	358,958

Description		Balance January 31, 2016		Balance July 31, 2015
Short-term	$	602,693	$	297,966
Long-term		-		61,002
Total	$	602,693	$	358,968

XML

Going concern (Details) - USD ($)	Jan. 31, 2016	Oct. 31, 2015
GOING CONCERN DETAILS
Negative working capital	$ 783,656	$ 591,731
Accumulated deficit	$ 1,725,134	$ 1,219,039

XML

Convertible promissory notes (Narrative) (Details) - USD ($)	3 Months Ended		6 Months Ended	12 Months Ended	20 Months Ended
	Jan. 31, 2016	Oct. 31, 2015	Jan. 31, 2016	Jul. 31, 2015	Jan. 31, 2016
Convertible promissory notes (Narrative)
Company issued convertible promissory notes totaling		$ 0		$ 0	$ 775,178
Company issued convertible promissory note to an employee		0		0	257,631
Convertible notes from the acquisition of MakerJet Asia, LTD	$ 68,000	62,000		399,500
Discount on convertible promissory notes totaling	$ 136,500	0		0	601,395
Discount on convertible promissory notes including to employee		0		0	207,258
Accumulated discount amortization		$ 341,327	$ 428,910	$ 0	$ 0

XML

Convertible promissory notes (Details) - USD ($)	Jan. 31, 2016	Oct. 31, 2015	Jul. 31, 2015
Convertible promissory notes Details
Convertible Promissory Notes	$ 775,178	$ 706,678	$ 638,678
Original beneficial conversion feature discount	(601,395)	(569,800)	(532,775)
Discount amortization	428,910	341,327	253,065
Unamortized discount	(172,485)	(228,473)	(218,708)
Net Convertible promissory notes	$ 602,693	$ 478,205	$ 358,958

XML

Convertible promissory notes Parentheticals (Details)	Jan. 31, 2016 USD ($) $ / shares	Oct. 31, 2015 USD ($) $ / shares
Convertible promissory notes Parentheticals
Convertible promissory notes amount, range minimum	$ 2,500	$ 2,500
Convertible promissory notes amount, range maximum	$ 131,631	$ 131,631
Convertible promissory notes maturing in year	48	1
Interest rate per annum	15.00%	15.00%
Conversion price per share | $ / shares	$ 0.001	$ 0.001

XML

Convertible promissory notes presented (Details) - USD ($)	Jan. 31, 2016	Oct. 31, 2015	Jul. 31, 2015
Convertible promissory notes presented in the balance sheet Details
Short-term	$ 602,693	$ 478,204	$ 297,966
Long-term		0	61,002
Total	$ 602,693	$ 478,204	$ 358,968

XML

Equity transactions (Details)	6 Months Ended
	Jan. 31, 2016 USD ($)	Dec. 02, 2015 USD ($)	Oct. 31, 2015 USD ($)	Oct. 30, 2015 USD ($)	Sep. 30, 2014
Equity Transactions Details
Shareholder approved a twenty-six for one forward split of our issued and outstanding common stock					26
Company majority shareholder, Market Milestone, Inc. cancellation of shares			$ 37,026	$ 161,200,000
Issuance of common stock for consulting services		$ 200,000
Increase of Capital Stock	$ 200
Increase of Capital Stock toward paid in capital	279,800
Increase to additional paid in capital related to beneficial conversion features on convertible promissory notes	$ 68,620

XML

SUBSEQUENT EVENTS (Details)	Oct. 31, 2015 USD ($) $ / shares	Jan. 31, 2015 USD ($) $ / shares
SUBSEQUENT EVENTS TRANSACTIONS DETAILS
Issued convertible promissory notes totaling | $	$ 47,500	$ 36,000
Notes mature within year	1	1
Notes carry interest at per annum	15.00%	15.00%
Conversion price per share | $ / shares	$ 0.001	$ 0.001