e424b5

PROSPECTUS SUPPLEMENT SUMMARY

This summary contains basic information about us and this offering. Because it is a summary, it does not contain all of the information that you should consider before investing. Before you decide to invest in our common stock, you should read this entire prospectus supplement and the accompanying prospectus carefully, including the section entitled “Risk Factors,” and our consolidated financial statements and the related notes and other documents incorporated by reference in the accompanying prospectus.

OUR COMPANY

We incorporated under the laws of the State of California in April 1999 as Micromed Laboratories, Inc. In August 2001, we changed our name to Oculus Innovative Sciences, Inc. and later reincorporated under the laws of the State of Delaware in December 2006. We conduct our business worldwide, with significant operating subsidiaries in Europe and Mexico, and references to our Company contained in this prospectus supplement include our subsidiaries, Oculus Technologies of Mexico, S.A. de C.V., Oculus Innovative Sciences Netherlands, B.V. and Oculus Innovative Sciences Japan, K.K, except where the context otherwise requires. Our principal executive offices are located at 1129 North McDowell Boulevard, Petaluma, California 94954. Our telephone number is (707) 782-0792. Our fiscal year end is March 31. Our website is www.oculusis.com. Information contained on our website does not constitute part of this prospectus supplement.

We develop, manufacture and market a family of products intended to prevent and treat infections in chronic and acute wounds. Our platform technology, called Microcyn^®, is a proprietary solution of electrically charged oxychlorine small molecules designed to treat a wide range of organisms that cause disease (pathogens). These include viruses, fungi, spores and antibiotic-resistant strains of bacteria, such as Methicillin-resistant Staphylococcus aureus, or MRSA, and Vancomycin-resistant Enterococcus, or VRE, in wounds.

We do not have the necessary regulatory approvals to market Microcyn in the United States as a drug. In the United States our device product does, however, have five clearances as a 510(k) medical device. We do not have the necessary regulatory clearance or approval to market Microcyn in the U.S. as a medical device for an antimicrobial or wound healing indication. In the future we expect to apply with the FDA for clearance as an antimicrobial in a liquid and a gel form and as conducive to wound healing via a 510(k) medical clearance. Outside the United States our product has a CE Mark device approval in Europe for debriding, irrigating and moistening acute and chronic wounds in comprehensive wound treatment by reducing microbial load and creating moist environment. In Mexico we are approved as a drug as antiseptic treatment of wounds and infected areas. In India our product has a drug license for cleaning and debriding in wound management while in China there is a medical device approval by the State Food and Drug Administration, or SFDA, for reducing the propagation of microbes in wounds and creating a moist environment for wound healing.

THE OFFERING


Common stock offered by Oculus		Up to 4,545 shares
Common stock to be outstanding after this offering		Up to 24,547,476 shares, based on 24,542,931 shares issued and outstanding as of November 9, 2009.
Use of proceeds		We will not receive proceeds from the issuance of the shares. See “Use of Proceeds.”
Risk factors		See the “Risk Factors” section of this prospectus for factors to consider before deciding to purchase our securities.
NASDAQ Capital Market symbol		OCLS

S-1

RISK FACTORS

Risks Related to Our Business

We have a history of losses, we expect to continue to incur losses and we may never achieve profitability.

We incurred a net loss of $1,893,000 for the three months ended September 30, 2009. At September 30, 2009, our accumulated deficit amounted to $114,239,000. During the three months ended September 30, 2009, net cash used in operating activities amounted to $3,355,000. At September 30, 2009, our working capital amounted to $6,373,000. We may need to raise additional capital from external sources. We expect to continue incurring losses for the foreseeable future and may raise additional capital to pursue product development initiatives and penetrate markets for the sale of our products. We may not raise additional capital. We believe that we have access to capital resources through possible public or private equity offerings, debt financings, corporate collaborations or other means. If the economic climate in the U.S. does not improve or continues to deteriorate, our ability to raise additional capital could be negatively impacted. If we are unable to secure additional capital, we may be required to curtail our research and development initiatives and take additional measures to reduce costs in order to conserve cash.

Declining general economic or business conditions may have a negative impact on our business.

Concerns over inflation, energy costs, geopolitical issues, the availability and cost of credit, the U.S. mortgage market and a declining real estate market in the U.S. have contributed to increased volatility and diminished expectations for the global economy and expectations of slower global economic growth going forward. These factors, combined with volatile oil prices, declining business and consumer confidence and increased unemployment, have precipitated a global economic slowdown. If the economic climate in the U.S. does not improve or continues to deteriorate, our business, including our patient population, our suppliers and our third-party payors, could be negatively affected, resulting in a negative impact on our business.

Our inability to raise additional capital on acceptable terms in the future may cause us to curtail certain operational activities, including regulatory trials, sales and marketing, and international operations, in order to reduce costs and sustain the business, and would have a material adverse effect on our business and financial condition.

We expect capital outlays and operating expenditures to increase over the next several years as we work to conduct regulatory trials commercialize our products and expand our infrastructure. We have entered into debt financing arrangements which are secured by all of our assets. We may need to raise additional capital to, among other things:

	•		fund our clinical trials and preclinical studies;

	•		sustain commercialization of our current products or new products;

	•		expand our manufacturing capabilities;

	•		increase our sales and marketing efforts to drive market adoption and address competitive developments;

	•		acquire or license technologies; and

	•		finance capital expenditures and our general and administrative expenses.

Our present and future funding requirements will depend on many factors, including:

	•		the progress and timing of our clinical trials;

	•		the level of research and development investment required to maintain and improve our technology position;

S-2

	•		cost of filing, prosecuting, defending and enforcing patent claims and other intellectual property rights;

	•		our efforts to acquire or license complementary technologies or acquire complementary businesses;

	•		changes in product development plans needed to address any difficulties in commercialization;

	•		competing technological and market developments; and

	•		changes in regulatory policies or laws that affect our operations.

If we raise additional funds by issuing equity securities, dilution to our stockholders could result. Any equity securities issued also may provide for rights, preferences or privileges senior to those of holders of our common stock. If we raise additional funds by issuing debt securities, these debt securities would have rights, preferences and privileges senior to those of holders of our common stock, and the terms of the debt securities issued could impose significant restrictions on our operations. If we raise additional funds through collaborations and licensing arrangements, we might be required to relinquish significant rights to our technologies or products, or grant licenses on terms that are not favorable to us. A failure to obtain adequate funds may cause us to postpone or curtail certain operational activities, including regulatory trials, sales and marketing, and international operations, in order to reduce costs and sustain the business, and would have a material adverse effect on our business and financial condition.

We do not have the necessary regulatory approvals to market Microcyn as a drug in the United States.

We have obtained five 510(k) clearances in the United States that permit us to sell Microcyn as a medical device to clean, moisten and debride wounds. Before we are permitted to sell Microcyn as a drug in the United States, we must, among other things, successfully complete additional preclinical studies and well-controlled clinical trials, submit a New Drug Application, or NDA, to the FDA and obtain FDA approval.

The FDA approval process is expensive and uncertain, requires detailed and comprehensive scientific and other data and generally takes several years. Despite the time and expense exerted, approval is never guaranteed. Even if we obtain FDA approval to sell Microcyn as a drug, we may not be able to successfully commercialize Microcyn as a drug in the United States and may never recover the substantial costs we have invested in the development of our Microcyn products.

Delays or adverse results in clinical trials could result in increased costs to us and delay our ability to generate revenue.

Clinical trials can be long and expensive, and the outcomes of clinical trials are uncertain and subject to delays. It may take several years to complete clinical trials, if at all, and a product candidate may fail at any stage of the clinical trial process. The length of time required varies substantially according to the type, complexity, novelty and intended use of the product candidate. Interim results of a preclinical study or clinical trial do not necessarily predict final results, and acceptable results in preclinical studies or early clinical trials may not be repeatable in later subsequent clinical trials. The commencement or completion of any of our clinical trials may be delayed or halted for a variety of reasons, including the following:

	•		insufficient funds to continue our clinical trials;

	•		the FDA requirements for approval, including requirements for testing efficacy or safety, may change;

	•		the FDA or other regulatory authorities do not approve a clinical trial protocol;

S-3

	•		patients do not enroll in clinical trials at the rate we expect;

	•		delays in reaching agreement on acceptable clinical trial agreement terms with prospective sites;

	•		delays in obtaining institutional review board approval to conduct a study at a prospective site;

	•		third party clinical investigators do not perform our clinical trials on our anticipated schedule or consistent with the clinical trial protocol and good clinical practices, or the third party organizations do not perform data collection and analysis in a timely or accurate manner; and

	•		governmental regulations or administrative actions are changed.

We do not know whether future clinical trials will demonstrate safety and efficacy sufficiently to result in additional FDA approvals. While a number of physicians have conducted clinical studies assessing the safety and efficacy of Microcyn for various indications, the data from these studies is not sufficient to support approval of Microcyn as a drug in the United States.

The FDA and other regulatory bodies may also change standards and acceptable trial procedures required for a showing of safety and efficacy. For example, until recently, the FDA accepted non-inferiority clinical trials, or clinical trials that show that a new treatment is equivalent to standard treatment, as the standard for anti-infective drug approvals. On October 12, 2007, the FDA released draft guidance entitled Antibacterial Drug Products: Use of Noninferiority Studies to Support Approval. This new agency guidance requires either placebo-controlled or superiority trial designs, which are designed to test whether, and to what extent, a new treatment is better than the placebo. The uncertainty of clinical trial protocols and changes within FDA guidelines could have a negative impact on the timelines and milestones for our clinical program.

If we fail to obtain, or experience significant delays in obtaining, additional regulatory clearances or approvals to market our current or future products, we may be unable to commercialize these products.

Developing, testing, manufacturing, marketing and selling of medical technology products are subject to extensive regulation by numerous governmental authorities in the United States and other countries. The process of obtaining regulatory clearance and approval of medical technology products is costly and time consuming. Even though the underlying product formulation may be the same or similar, our products are subject to different regulations and approval processes depending upon their intended use.

To obtain regulatory approval of our products as drugs in the United States, we must first show that our products are safe and effective for target indications through preclinical studies (laboratory and animal testing) and clinical trials (human testing). The FDA generally clears marketing of a medical device through the 510(k) pre-market clearance process if it is demonstrated that the new product has the same intended use and the same or similar technological characteristics as another legally marketed Class II device, such as a device already cleared by the FDA through the 510(k) premarket notification process, and otherwise meets the FDA’s requirements. Product modifications, including labeling the product for a new intended use, may require the submission of a new 510(k) clearance and FDA approval before the modified product can be marketed.

The outcomes of clinical trials are inherently uncertain. In addition, we do not know whether the necessary approvals or clearances will be granted or delayed for future products. The FDA could request additional information, changes to formulation or clinical testing that could adversely affect the time to market and sale of products as drugs. If we do not obtain the requisite regulatory clearances and approvals, we will be unable to commercialize our products as drugs or devices and may never recover any of the substantial costs we have invested in the development of Microcyn.

Distribution of our products outside the United States is subject to extensive government regulation. These regulations, including the requirements for approvals or clearance to market, the time required for

S-4

regulatory review and the sanctions imposed for violations, vary from country to country. We do not know whether we will obtain regulatory approvals in such countries or that we will not be required to incur significant costs in obtaining or maintaining these regulatory approvals. In addition, the export by us of certain of our products that have not yet been cleared for domestic commercial distribution may be subject to FDA export restrictions. Failure to obtain necessary regulatory approvals, the restriction, suspension or revocation of existing approvals or any other failure to comply with regulatory requirements would have a material adverse effect on our future business, financial condition, and results of operations.

If our products do not gain market acceptance, our business will suffer because we might not be able to fund future operations.

A number of factors may affect the market acceptance of our products or any other products we develop or acquire, including, among others:

	•		the price of our products relative to other treatments for the same or similar treatments;

	•		the perception by patients, physicians and other members of the health care community of the effectiveness and safety of our products for their indicated applications and treatments;

	•		our ability to fund our sales and marketing efforts; and

	•		the effectiveness of our sales and marketing efforts.

If our products do not gain market acceptance, we may not be able to fund future operations, including developing, testing and obtaining regulatory approval for new product candidates and expanding our sales and marketing efforts for our approved products, which would cause our business to suffer.

If our competitors develop products similar to Microcyn, we may need to modify or alter our business strategy, which may delay the achievement of our goals.

Competitors may develop products with similar characteristics as Microcyn. Such similar products marketed by larger competitors can hinder our efforts to penetrate the market. As a result, we may be forced to modify or alter our business and regulatory strategy and sales and marketing plans, as a response to changes in the market, competition and technology limitations, among others. Such modifications may pose additional delays in achieving our goals.

We intend to license or collaborate with third parties in various potential markets, and events involving these strategic partners or any future collaborations could delay or prevent us from developing or commercializing products.

Our business strategy and our short- and long-term operating results will depend in part on our ability to execute on existing strategic collaborations and to license or partner with new strategic partners. We believe collaborations allow us to leverage our resources and technologies and to access markets that are compatible with our own core areas of expertise while avoiding the cost of establishing or maintaining a direct sales force in each market. We may incur significant costs in the use of third parties to identify and assist in establishing relationships with potential collaborators.

To penetrate our target markets, we may need to enter into additional collaborative agreements to assist in the development and commercialization of products. For example, depending upon our analysis of the time and expense involved in obtaining FDA approval to sell a product to treat open wounds, we may choose to license our technology to a third party as opposed to pursuing commercialization ourselves. Establishing strategic collaborations is difficult and time-consuming. Potential collaborators may reject collaborations based upon their assessment of our financial, regulatory or intellectual property position and our internal capabilities. Our discussions with potential collaborators may not lead to the establishment of new

S-5

collaborations on favorable terms and may have the potential to provide collaborators with access to our key intellectual property filings and next generation formations. We have limited control over the amount and timing of resources that our current collaborators or any future collaborators devote to our collaborations or potential products. These collaborators may breach or terminate their agreements with us or otherwise fail to conduct their collaborative activities successfully and in a timely manner. Further, our collaborators may not develop or commercialize products that arise out of our collaborative arrangements or devote sufficient resources to the development, manufacture, marketing or sale of these products. By entering into a collaboration, we may preclude opportunities to collaborate with other third parties who do not wish to associate with our existing third party strategic partners. Moreover, in the event of termination of a collaboration agreement, termination negotiations may result in less favorable terms.

If we are unable to expand our direct domestic sales force, we may not be able to successfully sell our products in the United States.

We have very limited commercialization capability and make Microcyn-based products available primarily through our website, and several regional distributors. We plan for a more aggressive commercialization and product launch in the event we obtain drug approval from the FDA or obtain other clearance or approval with wound healing claims. Developing a sales force is expensive and time consuming, and the lack of qualified sales personnel could delay or limit the success of our product launch. Our domestic sales force, if established, will be competing with the sales operations of our competitors, which are better funded and more experienced. We may not be able to develop domestic sales capacity on a timely basis or at all.

Our dependence on distributors for sales could limit or prevent us from selling our products and from realizing long-term revenue growth.

We currently depend on distributors to sell Microcyn in the United States, Europe and other countries and intend to continue to sell our products primarily through distributors in Europe and the United States for the foreseeable future. If we are unable to expand our direct sales force, we will continue to rely on distributors to sell Microcyn. Our existing distribution agreements are generally short-term in duration, and we may need to pursue alternate distributors if the other parties to these agreements terminate or elect not to renew their agreements. If we are unable to retain our current distributors for any reason, we must replace them with alternate distributors experienced in supplying the wound care market, which could be time-consuming and divert management’s attention from other operational matters. In addition, we will need to attract additional distributors to expand the geographic areas in which we sell Microcyn. Distributors may not commit the necessary resources to market and sell our products to the level of our expectations, which could harm our ability to generate revenues. In addition, some of our distributors may also sell products that compete with ours. In some countries, regulatory licenses must be held by residents of the country. For example, the regulatory approval for one product in India is owned and held by our Indian distributor. If the licenses are not in our name or under our control, we might not have the power to ensure their ongoing effectiveness and use by us. If current or future distributors do not perform adequately, or we are unable to locate distributors in particular geographic areas, we may not realize long-term revenue growth.

If we fail to comply with ongoing regulatory requirements, or if we experience unanticipated problems with our products, these products could be subject to restrictions or withdrawal from the market.

Regulatory approvals or clearances that we currently have and that we may receive in the future are subject to limitations on the indicated uses for which the products may be marketed, and any future approvals could contain requirements for potentially costly post-marketing follow-up studies. If the FDA determines that our promotional materials or activities constitute promotion of an unapproved use or we otherwise fail to comply with FDA regulations, we may be subject to regulatory enforcement actions, including a warning letter, injunction, seizure, civil fine or criminal penalties. In addition, the manufacturing, labeling, packaging, adverse event reporting, storage, advertising, promotion, distribution and record-keeping for approved products are subject to extensive regulation. Our manufacturing facilities, processes and specifications are subject to periodic inspection by the FDA, European and other regulatory authorities and

S-6

from time to time, we may receive notices of deficiencies from these agencies as a result of such inspections. Our failure to continue to meet regulatory standards or to remedy any deficiencies could result in restrictions being imposed on products or manufacturing processes, fines, suspension or loss of regulatory approvals or clearances, product recalls, termination of distribution or product seizures or the need to invest substantial resources to comply with various existing and new requirements. In the more egregious cases, criminal sanctions, civil penalties, disgorgement of profits or closure of our manufacturing facilities are possible. The subsequent discovery of previously unknown problems with Microcyn, including adverse events of unanticipated severity or frequency, may result in restrictions on the marketing of our products, and could include voluntary or mandatory recall or withdrawal of products from the market.

New government regulations may be enacted and changes in FDA policies and regulations, their interpretation and enforcement, could prevent or delay regulatory approval of our products. We cannot predict the likelihood, nature or extent of adverse government regulation that may arise from future legislation or administrative action, either in the United States or abroad. Therefore, we do not know whether we will be able to continue to comply with any regulations or that the costs of such compliance will not have a material adverse effect on our future business, financial condition, and results of operations. If we are not able to maintain regulatory compliance, we will not be permitted to market our products and our business would suffer.

We may experience difficulties in manufacturing Microcyn, which could prevent us from commercializing one or more of our products.

The machines used to manufacture our Microcyn-based products are complex, use complicated software and must be monitored by highly trained engineers. Slight deviations anywhere in our manufacturing process, including quality control, labeling and packaging, could lead to a failure to meet the specifications required by the FDA, the EPA, European notified bodies, Mexican regulatory agencies and other foreign regulatory bodies, which may result in lot failures or product recalls. If we are unable to obtain quality internal and external components, mechanical and electrical parts, if our software contains defects or is corrupted, or if we are unable to attract and retain qualified technicians to manufacture our products, our manufacturing output of Microcyn, or any other product candidate based on our platform that we may develop, could fail to meet required standards, our regulatory approvals could be delayed, denied or revoked, and commercialization of one or more of our Microcyn-based products may be delayed or foregone. Manufacturing processes that are used to produce the smaller quantities of Microcyn needed for clinical tests and current commercial sales may not be successfully scaled up to allow production of significant commercial quantities. Any failure to manufacture our products to required standards on a commercial scale could result in reduced revenues, delays in generating revenue and increased costs.

Our competitive position depends on our ability to protect our intellectual property and our proprietary technologies.

Our ability to compete and to achieve and maintain profitability depends on our ability to protect our intellectual property and proprietary technologies. We currently rely on a combination of patents, patent applications, trademarks, trade secret laws, confidentiality agreements, license agreements and invention assignment agreements to protect our intellectual property rights. We also rely upon unpatented know-how and continuing technological innovation to develop and maintain our competitive position. These measures may not be adequate to safeguard our Microcyn technology. In addition, we granted a security interest in our assets, including our intellectual property, under a loan and security agreement. If we do not protect our rights adequately, third parties could use our technology, and our ability to compete in the market would be reduced.

Although we have filed U.S. and foreign patent applications related to our Microcyn based products, the manufacturing technology for making the products, and their uses, only one U.S. patent has been issued from these applications to date.

S-7

Our pending patent applications and any patent applications we may file in the future may not result in issued patents, and we do not know whether any of our in-licensed patents or any additional patents that might ultimately be issued by the U.S. Patent and Trademark Office or foreign regulatory body will protect our Microcyn technology. Any claims that issue may not be sufficiently broad to prevent third parties from producing competing substitutes and may be infringed, designed around, or invalidated by third parties. Even issued patents may later be found to be invalid, or may be modified or revoked in proceedings instituted by third parties before various patent offices or in courts. For example, a competitor filed a Notice of Opposition with the Opposition Division of the European Patent Office in February 2008 opposing our recently issued European patent.

The degree of future protection for our proprietary rights is more uncertain in part because legal means afford only limited protection and may not adequately protect our rights, and we will not be able to ensure that:

	•		we were the first to invent the inventions described in patent applications;

	•		we were the first to file patent applications for inventions;

	•		others will not independently develop similar or alternative technologies or duplicate our products without infringing our intellectual property rights;

	•		any patents licensed or issued to us will provide us with any competitive advantages;

	•		we will develop proprietary technologies that are patentable; or

	•		the patents of others will not have an adverse effect on our ability to do business.

The policies we use to protect our trade secrets may not be effective in preventing misappropriation of our trade secrets by others. In addition, confidentiality and invention assignment agreements executed by our employees, consultants and advisors may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosures. We cannot be certain that the steps we have taken will prevent the misappropriation and use of our intellectual property in the United States, or in foreign countries where the laws may not protect our proprietary rights as fully as in the United States.

We may face intellectual property infringement claims that could be time-consuming, costly to defend and could result in our loss of significant rights and, in the case of patent infringement claims, the assessment of treble damages.

On occasion, we may receive notices of claims of infringement, misappropriation or misuse of other parties’ proprietary rights. We may have disputes regarding intellectual property rights with the parties that have licensed those rights to us. We may also initiate claims to defend our intellectual property. Intellectual property litigation, regardless of outcome, is expensive and time-consuming, could divert management’s attention from our business and have a material negative effect on our business, operating results or financial condition. In addition, the outcome of such litigation may be unpredictable. If there is a successful claim of infringement against us, we may be required to pay substantial damages (including treble damages if we were to be found to have willfully infringed a third party’s patent) to the party claiming infringement, develop non-infringing technology, stop selling our products or using technology that contains the allegedly infringing intellectual property or enter into royalty or license agreements that may not be available on acceptable or commercially practical terms, if at all. Our failure to develop non-infringing technologies or license the proprietary rights on a timely basis could harm our business. In addition, modifying our products to exclude infringing technologies could require us to seek re-approval or clearance from various regulatory bodies for our products, which would be costly and time consuming. Also, we may be unaware of pending patent applications that relate to our technology. Parties making infringement claims on future issued patents may be able to obtain an injunction that would prevent us from selling our products

S-8

or using technology that contains the allegedly infringing intellectual property, which could harm our business.

Our ability to generate revenue will be diminished if we are unable to obtain acceptable prices or an adequate level of reimbursement from third-party payors of healthcare costs.

The continuing efforts of governmental and other third-party payors, including managed care organizations such as health maintenance organizations, or HMOs, to contain or reduce costs of health care may affect our future revenue and profitability, and the future revenue and profitability of our potential customers, suppliers and collaborative or license partners and the availability of capital. For example, in certain foreign markets, pricing or profitability of prescription pharmaceuticals is subject to government control. In the United States, governmental and private payors have limited the growth of health care costs through price regulation or controls, competitive pricing programs and drug rebate programs. Our ability to commercialize our products successfully will depend in part on the extent to which appropriate coverage and reimbursement levels for the cost of our Microcyn products and related treatment are obtained from governmental authorities, private health insurers and other organizations, such as HMOs.

There is significant uncertainty concerning third-party coverage and reimbursement of newly approved medical products and drugs. Third-party payors are increasingly challenging the prices charged for medical products and services. Also, the trend toward managed healthcare in the United States and the concurrent growth of organizations such as HMOs, as well as legislative proposals to reform healthcare or reduce government insurance programs, may result in lower prices for or rejection of our products. The cost containment measures that health care payors and providers are instituting and the effect of any health care reform could materially and adversely affect our ability to generate revenues.

In addition, given ongoing federal and state government initiatives directed at lowering the total cost of health care, the United States Congress and state legislatures will likely continue to focus on health care reform, the cost of prescription pharmaceuticals and the reform of the Medicare and Medicaid payment systems. While we cannot predict whether any proposed cost-containment measures will be adopted, the announcement or adoption of these proposals could reduce the price that we receive for our Microcyn products in the future.

We could be required to indemnify third parties for alleged infringement, which could cause us to incur significant costs.

Some of our distribution agreements contain commitments to indemnify our distributors against liability arising from infringement of third party intellectual property such as patents. We may be required to indemnify our customers for claims made against them or license fees they are required to pay. If we are forced to indemnify for claims or to pay license fees, our business and financial condition could be substantially harmed.

A significant part of our business is conducted outside of the United States, exposing us to additional risks that may not exist in the United States, which in turn could cause our business and operating results to suffer.

We have international operations in Mexico and Europe. During the years ended March 31, 2009 and 2008, approximately 76% and 70% of our total revenues, respectively, were generated from sales outside of the United States. Our business is highly regulated for the use, marketing and manufacturing of our Microcyn products both domestically and internationally. Our international operations are subject to risks, including:

	•		local political or economic instability;

	•		changes in governmental regulation;

S-9

	•		changes in import/export duties;

	•		trade restrictions;

	•		lack of experience in foreign markets;

	•		difficulties and costs of staffing and managing operations in certain foreign countries;

	•		work stoppages or other changes in labor conditions;

	•		difficulties in collecting accounts receivables on a timely basis or at all; and

	•		adverse tax consequences or overlapping tax structures.

We plan to continue to market and sell our products internationally to respond to customer requirements and market opportunities. We currently have international manufacturing facilities in Mexico and the Netherlands. Establishing operations in any foreign country or region presents risks such as those described above as well as risks specific to the particular country or region. In addition, until a payment history is established over time with customers in a new geography or region, the likelihood of collecting receivables generated by such operations could be less than our expectations. As a result, there is a greater risk that reserves set with respect to the collection of such receivables may be inadequate. If our operations in any foreign country are unsuccessful, we could incur significant losses and we may not achieve profitability.

In addition, changes in policies or laws of the United States or foreign governments resulting in, among other things, changes in regulations and the approval process, higher taxation, currency conversion limitations, restrictions on fund transfers or the expropriation of private enterprises, could reduce the anticipated benefits of our international expansion. If we fail to realize the anticipated revenue growth of our future international operations, our business and operating results could suffer.

Our sales in international markets subject us to foreign currency exchange and other risks and costs which could harm our business.

A substantial portion of our revenues are derived from outside the United States; primarily from Mexico. We anticipate that revenues from international customers will continue to represent a substantial portion of our revenues for the foreseeable future. Because we generate revenues in foreign currencies, we are subject to the effects of exchange rate fluctuations. The functional currency of our Mexican subsidiary is the Mexican Peso, and the functional currency of our subsidiary in the Netherlands is the Euro. For the preparation of our consolidated financial statements, the financial results of our foreign subsidiaries are translated into U.S. dollars on average exchange rates during the applicable period. If the U.S. dollar appreciates against the Mexican Peso or the Euro, as applicable, the revenues we recognize from sales by our subsidiaries will be adversely impacted. Foreign exchange gains or losses as a result of exchange rate fluctuations in any given period could harm our operating results and negatively impact our revenues. Additionally, if the effective price of our products were to increase as a result of fluctuations in foreign currency exchange rates, demand for our products could decline and adversely affect our results of operations and financial condition.

The loss of key members of our senior management team, one of our directors or our inability to retain highly skilled scientists, technicians and salespeople could adversely affect our business.

Our success depends largely on the skills, experience and performance of key members of our executive management team, including Hojabr Alimi, our Chief Executive Officer and Robert Northey, our Director of Research and Development. The efforts of these people will be critical to us as we continue to develop our products and attempt to commercialize products in the chronic and acute wound care market. If we were to lose one or more of these individuals, we may experience difficulties in competing effectively, developing our technologies and implementing our business strategies.

S-10

Our research and development programs depend on our ability to attract and retain highly skilled scientists and technicians. We may not be able to attract or retain qualified scientists and technicians in the future due to the intense competition for qualified personnel among medical technology businesses, particularly in the San Francisco Bay Area. We also face competition from universities and public and private research institutions in recruiting and retaining highly qualified personnel. In addition, our success depends on our ability to attract and retain salespeople with extensive experience in wound care and close relationships with the medical community, including physicians and other medical staff. We may have difficulties locating, recruiting or retaining qualified salespeople, which could cause a delay or decline in the rate of adoption of our products. If we are not able to attract and retain the necessary personnel to accomplish our business objectives, we may experience constraints that will adversely affect our ability to support our research, development and sales programs.

We maintain key-person life insurance only on Mr. Alimi. We may discontinue this insurance in the future, it may not continue to be available on commercially reasonable terms or, if continued, it may prove inadequate to compensate us for the loss of Mr. Alimi’s services.

The wound care industry is highly competitive and subject to rapid technological change. If our competitors are better able to develop and market products that are less expensive or more effective than any products that we may develop, our commercial opportunity will be reduced or eliminated.

Our success depends, in part, upon our ability to stay at the forefront of technological change and maintain a competitive position. We compete with large healthcare, pharmaceutical and biotechnology companies, along with smaller or early-stage companies that have collaborative arrangements with larger pharmaceutical companies, academic institutions, government agencies and other public and private research organizations. Many of our competitors have significantly greater financial resources and expertise in research and development, manufacturing, pre-clinical testing, conducting clinical trials, obtaining regulatory approvals and marketing approved products than we do. Our competitors may:

	•		develop and patent processes or products earlier than we will;

	•		develop and commercialize products that are less expensive or more efficient than any products that we may develop;

	•		obtain regulatory approvals for competing products more rapidly than we will; and

	•		improve upon existing technological approaches or develop new or different approaches that render our technology or products obsolete or non-competitive.

As a result, we may not be able to successfully commercialize any future products.

The success of our research and development efforts may depend on our ability to find suitable collaborators to fully exploit our capabilities. If we are unable to establish collaborations or if these future collaborations are unsuccessful, our research and development efforts may be unsuccessful, which could adversely affect our results of operations and financial condition.

An important element of our business strategy will be to enter into collaborative or license arrangements under which we license our Microcyn technology to other parties for development and commercialization. We expect that while we may initially seek to conduct initial clinical trials on our drug candidates, we may need to seek collaborators for our drug candidates and for a number of our potential products because of the expense, effort and expertise required to conduct additional clinical trials and further develop those potential product candidates. Because collaboration arrangements are complex to negotiate, we may not be successful in our attempts to establish these arrangements. If we need third party assistance in identifying and negotiating one or more acceptable arrangements, it might be costly. Also, we may not have products that are desirable to other parties, or we may be unwilling to license a potential product because the party interested in it is a competitor. The terms of any arrangements that we establish may not be favorable to us.

S-11

Alternatively, potential collaborators may decide against entering into an agreement with us because of our financial, regulatory or intellectual property position or for scientific, commercial or other reasons. If we are not able to establish collaborative agreements, we may not be able to develop and commercialize new products, which would adversely affect our business and our revenues.

In order for any of these collaboration or license arrangements to be successful, we must first identify potential collaborators or licensees whose capabilities complement and integrate well with ours. We may rely on these arrangements for not only financial resources, but also for expertise or economies of scale that we expect to need in the future relating to clinical trials, manufacturing, sales and marketing, and for licenses to technology rights. However, it is likely that we will not be able to control the amount and timing or resources that our collaborators or licensees devote to our programs or potential products. If our collaborators or licensees prove difficult to work with, are less skilled than we originally expected, or do not devote adequate resources to the program, the relationship will not be successful. If a business combination involving a collaborator or licensee and a third party were to occur, the effect could be to diminish, terminate or cause delays in development of a potential product.

If we are unable to comply with broad and complex federal and state fraud and abuse laws, including state and federal anti-kickback laws, we could face substantial penalties and our products could be excluded from government healthcare programs.

We are subject to various federal and state laws pertaining to healthcare fraud and abuse, which include, among other things, “anti-kickback” laws that prohibit payments to induce the referral of products and services, and “false claims” statutes that prohibit the fraudulent billing of federal healthcare programs. Our operations are subject to the Federal Anti-Kickback Statute, a criminal statute that, subject to certain statutory exceptions, prohibits any person from knowingly and willfully offering, paying, soliciting or receiving remuneration, directly or indirectly, to induce or reward a person either (i) for referring an individual for the furnishing of items or services for which payment may be made in whole or in part by a government healthcare program such as Medicare or Medicaid, or (ii) for purchasing, leasing, or ordering or arranging for or recommending the purchasing, leasing or ordering of an item or service for which payment may be made under a government healthcare program. Because of the breadth of the federal anti-kickback statute, the Office of Inspector General of the U.S. Department of Health and Human Services, or the OIG, was authorized to adopt regulations setting forth additional exceptions to the prohibitions of the statute commonly known as “safe harbors.” If all of the elements of an applicable safe harbor are fully satisfied, an arrangement will not be subject to prosecution under the federal anti-kickback statute.

In addition, if there is a change in law, regulation or administrative or judicial interpretations of these laws, we may have to change our business practices or our existing business practices could be challenged as unlawful, which could have a negative effect on our business, financial condition and results of operations.

Healthcare fraud and abuse laws are complex, and even minor, inadvertent irregularities can potentially give rise to claims that a statute or regulation has been violated. The frequency of suits to enforce these laws have increased significantly in recent years and have increased the risk that a healthcare company will have to defend a false claim action, pay fines or be excluded from the Medicare, Medicaid or other federal and state healthcare programs as a result of an investigation arising out of such action. We cannot assure you that we will not become subject to such litigation. Any violations of these laws, or any action against us for violation of these laws, even if we successfully defend against it, could harm our reputation, be costly to defend and divert management’s attention from other aspects of our business. Similarly, if the physicians or other providers or entities with whom we do business are found to have violated abuse laws, they may be subject to sanctions, which could also have a negative impact on us.

Our efforts to discover and develop potential products may not lead to the discovery, development, commercialization or marketing of actual drug products.

We are currently engaged in a number of different approaches to discover and develop new product applications and product candidates. At the present time, we have one Microcyn-based drug candidate in

S-12

clinical trials. We also have a non-Microcyn-based compound in the research and development phase. We believe this compound has potential applications in oncology. Discovery and development of potential drug candidates are expensive and time-consuming, and we do not know if our efforts will lead to discovery of any drug candidates that can be successfully developed and marketed. If our efforts do not lead to the discovery of a suitable drug candidate, we may be unable to grow our clinical pipeline or we may be unable to enter into agreements with collaborators who are willing to develop our drug candidates.

We must implement additional and expensive finance and accounting systems, procedures and controls to accommodate growth of our business and organization and to satisfy public company reporting requirements, which will increase our costs and require additional management resources.

As a public reporting company, we are required to comply with the Sarbanes-Oxley Act of 2002 and the related rules and regulations of the Securities and Exchange Commission, or the Commission. Section 404 of the Sarbanes-Oxley Act of 2002, or Section 404, requires our management to perform an annual assessment of our internal control over financial reporting. Compliance with Section 404 and other requirements of doing business as a public company have and will continue to increase our costs and require additional management resources to implement an ongoing program to perform system and process evaluation and testing of our internal controls. In the past, we entered into transactions that resulted in accounting consequences that we did not identify at the time of the transactions. As a result, our prior independent auditors informed us that we did not have the appropriate financial management and reporting structure in place to meet the demands of a public company and that our accounting and financial personnel lacked the appropriate level of accounting knowledge, experience and training. In calendar year 2006, our current independent auditors recommended certain changes which, in addition to other changes in our financial reporting and management structure, have been implemented at additional cost. We have upgraded our accounting systems, procedures and controls and will need to continue to implement additional finance and accounting systems, procedures and controls as we grow our business and organization, enter into complex business transactions and take actions designed to satisfy reporting requirements. As of our second report on Form 10-K, our management concluded that our internal controls were adequate to meet the required Section 404 assessment. If we are unable to complete the required Section 404 assessment as to adequacy of our internal control over financial reporting in future Form 10-K filings, our ability to obtain additional financing could be impaired. In addition, investors could lose confidence in the reliability of our internal control over financial reporting and in the accuracy of our periodic reports filed under the Securities Exchange Act of 1934. A lack of investor confidence in the reliability and accuracy of our public reporting could cause our stock price to decline.

We may not be able to maintain sufficient product liability insurance to cover claims against us.

Product liability insurance for the healthcare industry is generally expensive to the extent it is available at all. We may not be able to maintain such insurance on acceptable terms or be able to secure increased coverage if the commercialization of our products progresses, nor can we be sure that existing or future claims against us will be covered by our product liability insurance. Moreover, the existing coverage of our insurance policy or any rights of indemnification and contribution that we may have may not be sufficient to offset existing or future claims. A successful claim against us with respect to uninsured liabilities or in excess of insurance coverage and not subject to any indemnification or contribution could have a material adverse effect on our future business, financial condition, and results of operations.

Risks Related to Our Common Stock

Our operating results may fluctuate, which could cause our stock price to decrease.

Fluctuations in our operating results may lead to fluctuations, including declines, in our share price. Our operating results and our share price may fluctuate from period to period due to a variety of factors, including:

•

demand by physicians, other medical staff and patients for our Microcyn products;

S-13

	•		reimbursement decisions by third-party payors and announcements of those decisions;

	•		clinical trial results and publication of results in peer-reviewed journals or the presentation at medical conferences;

	•		the inclusion or exclusion of our Microcyn products in large clinical trials conducted by others;

	•		actual and anticipated fluctuations in our quarterly financial and operating results;

	•		developments or disputes concerning our intellectual property or other proprietary rights;

	•		issues in manufacturing our product candidates or products;

	•		new or less expensive products and services or new technology introduced or offered by our competitors or us;

	•		the development and commercialization of product enhancements;

	•		changes in the regulatory environment;

	•		delays in establishing new strategic relationships;

	•		costs associated with collaborations and new product candidates;

	•		introduction of technological innovations or new commercial products by us or our competitors;

	•		litigation or public concern about the safety of our product candidates or products;

	•		changes in recommendations of securities analysts or lack of analyst coverage;

	•		failure to meet analyst expectations regarding our operating results;

	•		additions or departures of key personnel; and

	•		general market conditions.

Variations in the timing of our future revenues and expenses could also cause significant fluctuations in our operating results from period to period and may result in unanticipated earning shortfalls or losses. In addition, the NASDAQ Capital Market, in general, and the market for life sciences companies, in particular, have experienced significant price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies.

If an active, liquid trading market for our common stock does not develop, you may not be able to sell your shares quickly or at or above the price you paid for it.

Although our common stock is listed on the NASDAQ Capital Market, an active and liquid trading market for our common stock has not yet and may not ever develop or be sustained. You may not be able to sell your shares quickly or at or above the price you paid for our stock if trading in our stock is not active.

Anti-takeover provisions in our charter and by-laws and under Delaware law may make it more difficult for stockholders to change our management and may also make a takeover difficult.

S-14

Our corporate documents and Delaware law contain provisions that limit the ability of stockholders to change our management and may also enable our management to resist a takeover. These provisions include:

	•		the ability of our board of directors to issue and designate the rights of, without stockholder approval, up to 5,000,000 shares of convertible preferred stock, which rights could be senior to those of common stock;

	•		limitations on persons authorized to call a special meeting of stockholders; and

	•		advance notice procedures required for stockholders to make nominations of candidates for election as directors or to bring matters before meeting of stockholders.

These provisions might discourage, delay or prevent a change of control in our management. These provisions could also discourage proxy contests and make it more difficult for you and other stockholders to elect directors and cause us to take other corporate actions. In addition, the existence of these provisions, together with Delaware law, might hinder or delay an attempted takeover other than through negotiations with our board of directors.

Our stockholders may experience substantial dilution in the value of their investment if we issue additional shares of our capital stock.

Our charter allows us to issue up to 100,000,000 shares of our common stock and to issue and designate the rights of, without stockholder approval, up to 5,000,000 shares of convertible preferred stock. In the event we issue additional shares of our capital stock, dilution to our stockholders could result. In addition, if we issue and designate a class of convertible preferred stock, these securities may provide for rights, preferences or privileges senior to those of holders of our common stock.

FORWARD-LOOKING STATEMENTS

This prospectus supplement, the accompanying prospectus and the documents incorporated by reference in this prospectus supplement contain forward looking statements. When used in this prospectus supplement, the words “expects,” “anticipates,” “intends,” “estimates,” “plans,” “projects,” “continue,” “ongoing,” “potential,” “expect,” “predict,” “believe,” “intend,” “may,” “can,” “will,” “should,” “could,” “would” and similar expressions are intended to identify forward-looking statements.

You should not place undue reliance on these forward-looking statements. Our actual results could differ materially from those anticipated in the forward-looking statements for many reasons, including the reasons described in our “Risk Factors” section. Although we believe the expectations reflected in the forward-looking statements are reasonable, they relate only to events as of the date on which the statements are made. These forward-looking statements speak only as of the date of this prospectus supplement. We expressly disclaim any obligation or undertaking to update or revise any forward-looking statements contained herein to reflect any change in our expectations with regard thereto or any change in events, conditions or circumstances on which any such statement is based, except as required by law.

USE OF PROCEEDS

We have engaged Bloomfield Advisors LLC to perform financial and other consulting services for us. We are issuing 4,545 shares as the payment for services rendered.

S-15

PLAN OF DISTRIBUTION

We are issuing 4,545 shares to Bloomfield Advisors LLC as the payment of the fee for financial and other consulting services provided to us. Neither our Company nor any member of our management will be compensated for the foregoing distribution of securities other than the regular compensation they receive under the terms of their employment. Any expenses incurred in this distribution will be borne by us.

EXPERTS

The consolidated financial statements of Oculus Innovative Sciences, Inc. appearing in Oculus Innovative Sciences, Inc.’s Annual Report on Form 10-K for the year ended March 31, 2009, have been audited by Marcum LLP, independent registered public accounting firm, as set forth in their report therein, included therein, and incorporated herein by reference. Such consolidated financial statements are incorporated herein by reference in reliance upon such report given on the authority of such firm as experts in accounting and auditing.

WHERE YOU CAN FIND MORE INFORMATION

We have filed a registration statement on Form S-3 with the SEC under the Securities Act of 1933, as amended. This prospectus supplement and the accompanying prospectus is part of the registration statement but the registration statement includes and incorporates by reference additional information and exhibits. We file annual, quarterly and current reports, proxy statements and other information with the SEC. You may read and copy the registration statement and any document we file with the SEC at the public reference room maintained by the SEC at 100 F. Street, N.E., Washington, D.C. 20549. You may obtain information on the operation of the public reference room by calling the SEC at 1-800-SEC-0330. The SEC also maintains a web site that contains reports, proxy and information statements and other information regarding companies, such as ours, that file documents electronically with the SEC. The address of that site on the world wide web is http://www.sec.gov. The information on the SEC’s web site is not part of this prospectus supplement and the accompanying prospectus, and any references to this web site or any other web site are inactive textual references only.

The SEC permits us to “incorporate by reference” the information contained in documents we file with the SEC, which means that we can disclose important information to you by referring you to those documents rather than by including them in this prospectus supplement and the accompanying prospectus. Information that is incorporated by reference is considered to be part of this prospectus supplement and the accompanying prospectus and you should read it with the same care that you read this prospectus supplement and the accompanying prospectus. Later information that we file with the SEC will automatically update and supersede the information that is either contained, or incorporated by reference, in this prospectus supplement and the accompanying prospectus, and will be considered to be a part of this prospectus supplement and the accompanying prospectus from the date those documents are filed. We have filed with the SEC, and incorporate by reference in this prospectus supplement and the accompanying prospectus:

	•		our Annual Report on Form 10-K for the year ended March 31, 2009;

	•		our Quarterly Report on Form 10-Q for the quarter ended September 30, 2009;

	•		our Quarterly Report on Form 10-Q for the quarter ended June 30, 2009;

	•		our Current Report on Form 8-K, filed on August 6, 2009;

	•		our Proxy Statement on Schedule 14A filed on July 29, 2009; and

S-16

•

the description of our common stock contained in our Registration Statement on Form 8-A filed on December 15, 2006, including any amendment or report filed for the purpose of updating such description.

We also incorporate by reference all additional documents that we file with the SEC under the terms of Sections 13(a), 13(c), 14 or 15(d) of the Exchange Act that are made between the date of this prospectus supplement and the termination of any offering of securities offered by this prospectus supplement or the accompanying prospectus. We are not, however, incorporating, in each case, any documents or information that we are deemed to furnish and not file in accordance with SEC rules.

You may request a copy of any or all of the documents incorporated by reference but not delivered with this prospectus supplement and the accompanying prospectus, at no cost, by writing or telephoning us at the following address and number: Investor Relations, Oculus Innovative Sciences, Inc., 1129 N. McDowell Blvd., Petaluma, California 94954, telephone (707) 782-0792. We will not, however, send exhibits to those documents, unless the exhibits are specifically incorporated by reference in those documents.

S-17

PROSPECTUS

$75,000,000

OCULUS INNOVATIVE SCIENCES, INC.

Common Stock
Preferred Stock
Depositary Shares
Warrants

We may, from time to time, offer and sell preferred stock, either separately or represented by depositary shares, common stock or warrants, either separately or in units, in one or more offerings. The preferred stock and warrants may be convertible into or exercisable or exchangeable for common or preferred stock. We will specify in the accompanying prospectus supplement more specific information about any such offering. The aggregate initial offering price of all securities sold under this prospectus will not exceed $75,000,000, including the U.S. dollar equivalent if the public offering of any such securities is denominated in one or more foreign currencies, foreign currency units or composite currencies.

We may offer these securities independently or together in any combination for sale directly to investors or through underwriters, dealers or agents. We will set forth the names of any underwriters, dealers or agents and their compensation in the accompanying prospectus supplement.

This prospectus may not be used to sell any of these securities unless accompanied by a prospectus supplement.

Our common stock is traded on the NASDAQ Global Market under the symbol “OCLS.” On February 12, 2008, the closing price of our common stock on the NASDAQ Global Market was $5.24 per share. The market value of our outstanding common equity on February 12, 2008 was $60,380,824. We have not offered any securities pursuant to General Instruction I.B.6. of Form S-3 during the 12 calendar months prior to and including the date hereof.

Investing in our securities involves a high degree of risk. See the section entitled “Risk Factors” in the accompanying prospectus supplement and in the documents we incorporate by reference in this prospectus.

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or passed upon the adequacy or accuracy of this prospectus. Any representation to the contrary is a criminal offense.

The date of this prospectus is February 26, 2008.

TABLE OF CONTENTS


	Page

About This Prospectus		2
Risk Factors		2
Our Company		3
Forward-Looking Statements		3
Use of Proceeds		4
Description of Preferred Stock		4
Description of Depositary Shares		4
Description of Common Stock		6
Description of Warrants		8
Plan of Distribution		9
Legal Matters		10
Experts		10
Where You Can Find More Information		10

You should rely only on the information incorporated by reference or provided in this prospectus, any prospectus supplement and the registration statement. We have not authorized anyone else to provide you with different information. If anyone provides you with different or inconsistent information, you should not rely on it. We are not making an offer to sell these securities in any state where the offer or sale is not permitted. You should assume that the information in this prospectus and any prospectus supplement, or incorporated by reference, is accurate only as of the dates of those documents. Our business, financial condition, results of operations and prospects may have changed since those dates.

ABOUT THIS PROSPECTUS

This prospectus is part of a registration statement that we filed with the Securities and Exchange Commission, or SEC, using a “shelf” registration, or continuous offering, process. Under this shelf registration process, we may, from time to time, issue and sell any combination of preferred stock, either separately or represented by depositary shares, common stock or warrants, either separately or in units, in one or more offerings with a maximum aggregate offering price of $75,000,000, including the U.S. dollar equivalent if the public offering of any such securities is denominated in one or more foreign currencies, foreign currency units or composite currencies.

This prospectus provides you with a general description of the securities we may offer. Each time we sell securities, we will provide a prospectus supplement that will contain specific information about the terms of that offering and the offered securities. Any prospectus supplement may also add, update or change information contained in this prospectus. Any statement that we make in this prospectus will be modified or superseded by any inconsistent statement made by us in a prospectus supplement. The registration statement we filed with the SEC includes exhibits that provide more detail of the matters discussed in this prospectus. You should read this prospectus and the related exhibits filed with the SEC and any prospectus supplement, together with additional information described under the heading “Where You Can Find More Information,” before making your investment decision.

Unless the context otherwise requires, references in this prospectus and the accompanying prospectus supplement to “Oculus,” “we,” “us” and “our” refer to Oculus Innovative Sciences, Inc.

RISK FACTORS

Investing in our securities involves a high degree of risk. The prospectus supplement relating to a particular offering will contain a discussion of risks applicable to an investment in the securities offered. Prior to making a decision about investing in our securities, you should carefully consider the specific factors discussed under the heading “Risk Factors” in the applicable prospectus supplement together with

all of the other information contained in the prospectus supplement or appearing or incorporated by reference in this prospectus.

OUR COMPANY

We have developed, and we manufacture and market, a family of products intended to prevent and treat infections in chronic and acute wounds. Infection is a serious potential complication in both chronic and acute wounds, and controlling infection is a critical step in wound healing. Our platform technology, called Microcyn, is a proprietary oxychlorine small molecule formulation that is designed to treat a wide range of organisms that cause disease, including viruses, fungi, spores and antibiotic resistant strains of bacteria, in wounds. We do not have the necessary regulatory approvals to market Microcyn in the United States as a drug, nor do we have the necessary regulatory clearance or approval to market Microcyn in the United States as a medical device for an antimicrobial or wound healing indication. However, our device product is cleared for sale in the United States as a medical device for wound cleaning, or debridement, lubricating, moistening and dressing; is a device under CE Mark in Europe with anti-infective claims; and is approved as a drug in India and as an antiseptic in Mexico. In the first fiscal quarter of 2008, we began enrolling patients in a Phase II randomized open label clinical trial, which is designed to evaluate the effectiveness of Microcyn in mildly infected diabetic foot ulcers with endpoints of clinical cure and improvement of infection (resolution of signs and symptoms of infection) supported by microbiological response. We completed enrollment and treatment of patients of our Phase II trial in the fourth calendar quarter of 2007 and expect to announce results in the first calendar quarter of 2008. We are currently pursuing strategic partnerships to assess potential applications for Microcyn in several other markets, including respiratory, ophthalmology, dermatology, dental and veterinary markets, and FDA or other governmental approvals may be required for any potential new products or new indications.

Our principal operations are in Petaluma, California, and we conduct operations in Europe, Latin America and Japan through our wholly owned subsidiaries, Oculus Innovative Sciences Netherlands B.V., Oculus Technologies of Mexico, S.A. de C.V. and Oculus Japan K.K.

We were incorporated in California in 1999 as Micromed Laboratories, Inc. In August 2001, we changed our name to Oculus Innovative Sciences, Inc. In December 2006, we reincorporated in Delaware. Our principal executive offices are located at 1129 N. McDowell Blvd., Petaluma, California, 94954, and our telephone number is (707) 782-0792. Our website is www.oculusis.com. Information on our website is not a part of this prospectus. Oculus, Microcyn, and Dermacyn are our trademarks or registered trademarks. All other trademarks and services marks are the property of their respective owners.

FORWARD-LOOKING STATEMENTS

When used in this prospectus, the words “expects,” “believes,” “anticipates,” “estimates,” “may,” “could,” “intends,” and similar expressions are intended to identify forward-looking statements. These statements are subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those projected or otherwise implied by the forward-looking statements. These forward-looking statements speak only as of the date of this prospectus. Given these risks and uncertainties, you should not place undue reliance on these forward-looking statements. We will discuss many of these risks and uncertainties in greater detail in any prospectus supplement under the heading “Risk Factors.” Additional cautionary statements or discussions of risks and uncertainties that could affect our results or the achievement of the expectations described in forward-looking statements may also be contained in the documents we incorporate by reference into this prospectus.

These forward-looking statements speak only as of the date of this prospectus. We expressly disclaim any obligation or undertaking to release publicly any updates or revisions to any forward-looking statements contained herein to reflect any change in our expectations with regard thereto or any change in events, conditions or circumstances on which any such statement is based. You should, however, review additional disclosures we make in our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, and Current Reports on Form 8-K filed with the SEC.

USE OF PROCEEDS

Unless we state otherwise in the accompanying prospectus supplement, we intend to use the net proceeds from the sale of the securities offered by this prospectus for general corporate purposes. General corporate purposes may include clinical trials, additions to working capital, research and development, financing of capital expenditures, repayment or redemption of existing indebtedness, and future acquisitions and strategic investment opportunities. Pending the application of net proceeds, we expect to invest the net proceeds in interest-bearing securities.

DESCRIPTION OF PREFERRED STOCK

As of January 31, 2008, our authorized preferred stock, par value $0.0001 per share, was 5,000,000 shares, none of which were issued and outstanding. We may issue preferred stock, in series, with such designations, powers, preferences and other rights and qualifications, limitations or restrictions as our board of directors may authorize, without further action by our stockholders, including:

	•		the distinctive designation of each series and the number of shares that will constitute the series;

	•		the voting rights, if any, of shares of the series and the terms and conditions of the voting rights;

	•		the dividend rate on the shares of the series, the dates on which dividends are payable, any restriction, limitation or condition upon the payment of dividends, whether dividends will be cumulative, and the dates from and after which dividends shall accumulate;

	•		the prices at which, and the terms and conditions on which, the shares of the series may be redeemed, if the shares are redeemable;

	•		the terms and conditions of a sinking or purchase fund for the purchase or redemption of shares of the series, if such a fund is provided;

	•		any preferential amount payable upon shares of the series in the event of the liquidation, dissolution or winding up of, or upon the distribution of any of our assets; and

	•		the prices or rates of conversion or exchange at which, and the terms and conditions on which, the shares of the series may be converted or exchanged into other securities, if the shares are convertible or exchangeable.

The particular terms of any series of preferred stock, and the transfer agent and registrar for that series, will be described in a prospectus supplement. All preferred stock offered, when issued, will be fully paid and nonassessable. Any material United States federal income tax consequences and other special considerations with respect to any preferred stock offered under this prospectus will also be described in the applicable prospectus supplement.

DESCRIPTION OF DEPOSITARY SHARES

The following description of the depositary shares does not purport to be complete and is subject to and qualified in its entirety by the relevant deposit agreement and the depositary receipts with respect to the depositary shares relating to any particular series of preferred stock. You should read these documents as they, and not this description, will define your rights as a holder of depositary shares. Forms of these documents will be filed with the SEC in connection with the offering of depositary shares.

General

If we elect to offer fractional interests in shares of preferred stock, we will provide for the issuance by a depositary to the public of receipts for depositary shares. Each depositary share will represent fractional interests of preferred stock. We will deposit the shares of preferred stock underlying the depositary shares under a deposit agreement between us and a bank or trust company selected by us. The bank or trust company must have its principal office in the United States and a combined capital and surplus of at least $50 million. The depositary receipts will evidence the depositary shares issued under the deposit agreement.

The deposit agreement will contain terms applicable to the holders of depositary shares in addition to the terms stated in the depositary receipts. Each owner of depositary shares will be entitled to all the rights and preferences of the preferred stock underlying the depositary shares in proportion to the applicable fractional interest in the underlying shares of preferred stock. The depositary will issue the depositary receipts to individuals purchasing the fractional interests in shares of the related preferred stock according to the terms of the offering described in a prospectus supplement.

Dividends and Other Distributions

The depositary will distribute all cash dividends or other cash distributions received for the preferred stock to the entitled record holders of depositary shares in proportion to the number of depositary shares that the holder owns on the relevant record date. The depositary will distribute only an amount that can be distributed without attributing to any holder of depositary shares a fraction of one cent. The depositary will add the undistributed balance to and treat it as part of the next sum received by the depositary for distribution to holders of depositary shares.

If there is a non-cash distribution, the depositary will distribute property received by it to the entitled record holders of depositary shares, in proportion, insofar as possible, to the number of depositary shares owned by the holders, unless the depositary determines, after consultation with us, that it is not feasible to make such distribution. If this occurs, the depositary may, with our approval, sell such property and distribute the net proceeds from the sale to the holders. The deposit agreement also will contain provisions relating to how any subscription or similar rights that we may offer to holders of the preferred stock will be available to the holders of the depositary shares.

Conversion, Exchange, Redemption and Liquidation

If any series of preferred stock underlying the depositary shares may be converted or exchanged, each record holder of depositary receipts will have the right or obligation to convert or exchange the depositary shares represented by the depositary receipts.

The terms on which the depositary shares relating to the preferred stock of any series may be redeemed, and any amounts distributable upon our liquidation, dissolution or winding up, will be described in the relevant prospectus supplement.

Voting

When the depositary receives notice of a meeting at which the holders of the preferred stock are entitled to vote, the depositary will mail the particulars of the meeting to the record holders of the depositary shares. Each record holder of depositary shares on the record date may instruct the depositary on how to vote the shares of preferred stock underlying the holder’s depositary shares. The depositary will try, if practical, to vote the number of shares of preferred stock underlying the depositary shares according to the instructions. We will agree to take all reasonable action requested by the depositary to enable it to vote as instructed.

Amendments

We and the depositary may agree to amend the deposit agreement and the depositary receipt evidencing the depositary shares. Any amendment that (a) imposes or increases certain fees, taxes or other charges payable by the holders of the depositary shares as described in the deposit agreement or that (b) otherwise prejudices any substantial existing right of holders of depositary shares, will not take effect until 30 days after the depositary has mailed notice of the amendment to the record holders of depositary shares. Any holder of depositary shares that continues to hold its shares at the end of the 30-day period will be deemed to have agreed to the amendment.

Termination

We may direct the depositary to terminate the deposit agreement by mailing a notice of termination to holders of depositary shares at least 30 days prior to termination. In addition, a deposit agreement will automatically terminate if:

	•		the depositary has redeemed all related outstanding depositary shares, or

	•		we have liquidated, terminated or wound up our business and the depositary has distributed the preferred stock of the relevant series to the holders of the related depositary shares.

Payment of Fees and Expenses

We will pay all fees, charges and expenses of the depositary, including the initial deposit of the preferred stock and any redemption of the preferred stock. Holders of depositary shares will pay transfer and other taxes and governmental charges and any other charges as are stated in the deposit agreement for their accounts.

Resignation and Removal of Depositary

At any time, the depositary may resign by delivering notice to us, and we may remove the depositary. Resignations or removals will take effect upon the appointment of a successor depositary and its acceptance of the appointment. The successor depositary must be appointed within 60 days after delivery of the notice of resignation or removal and must be a bank or trust company having its principal office in the United States and having a combined capital and surplus of at least $50 million.

Reports

The depositary will forward to the holders of depositary shares all reports and communications from us that are delivered to the depositary and that we are required by law, the rules of an applicable securities exchange or our restated certificate of incorporation to furnish to the holders of the preferred stock. Neither we nor the depositary will be liable if the depositary is prevented or delayed by law or any circumstances beyond its control in performing its obligations under the deposit agreement. The deposit agreement limits our obligations and the depositary’s obligations to performance in good faith of the duties stated in the deposit agreement. Neither we nor the depositary will be obligated to prosecute or defend any legal proceeding connected with any depositary shares or preferred stock unless the holders of depositary shares requesting us to do so furnish us with satisfactory indemnity. In performing our obligations, we and the depositary may rely upon the written advice of our counsel or accountants, on any information that competent people provide to us and on documents that we believe are genuine.

DESCRIPTION OF COMMON STOCK

This section describes the general terms and provisions of the shares of our common stock, par value $0.0001 per share. This description is only a summary and is qualified in its entirety by reference to the description of our common stock incorporated by reference in this prospectus. Our restated certificate of incorporation and our bylaws have been filed as exhibits to our periodic reports filed with the SEC, which are incorporated by reference in this prospectus. You should read our restated certificate of incorporation

and our bylaws for additional information before you buy any of our common stock or other securities. See “Where You Can Find More Information.”

We have 100,000,000 shares of authorized common stock. As of February 7, 2008, there were 13,271,035 shares of common stock issued and outstanding. Each holder of common stock is entitled to one vote for each share of common stock held on all matters submitted to a vote of stockholders. We have not provided for cumulative voting for the election of directors in our restated certificate of incorporation. This means that the holders of a majority of the shares voted can elect all of the directors then standing for election. Subject to preferences that may apply to shares of preferred stock outstanding at the time, the holders of outstanding shares of our common stock are entitled to receive dividends out of assets legally available at the times and in the amounts that our board of directors may determine from time to time. Upon our liquidation, dissolution or winding-up, the holders of common stock are entitled to share ratably in all assets remaining after payment of all liabilities and the liquidation preferences of any outstanding preferred stock. Holders of common stock have no preemptive or conversion rights or other subscription rights. There are no redemption or sinking fund provisions applicable to the common stock. All outstanding shares of common stock are fully paid and nonassessable, and the shares of common stock offered, when issued, will be fully paid and nonassessable.

Certain Provisions of Delaware Law and of the Charter and Bylaws

The provisions of Delaware law, our restated certificate of incorporation and our bylaws described below may have the effect of delaying, deferring or discouraging another party from acquiring control of us.

Delaware Law. We are subject to the provisions of Section 203 of the Delaware General Corporation Law regulating corporate takeovers. In general, those provisions prohibit a Delaware corporation from engaging in any business combination with any interested stockholder for a period of three years following the date that the stockholder became an interested stockholder, unless:

	•		the transaction is approved by the board before the date the interested stockholder attained that status;

	•		upon consummation of the transaction that resulted in the stockholder becoming an interested stockholder, the interested stockholder owned at least 85% of the voting stock of the corporation outstanding at the time the transaction commenced; or

	•		on or after the date the business combination is approved by the board and authorized at a meeting of stockholders by at least two-thirds of the outstanding voting stock that is not owned by the interested stockholder.

			Section 203 defines “business combination” to include the following:

	•		any merger or consolidation involving the corporation and the interested stockholder;

	•		any sale, transfer, pledge or other disposition of 10% or more of the assets of the corporation involving the interested stockholder;

	•		subject to certain exceptions, any transaction that results in the issuance or transfer by the corporation of any stock of the corporation to the interested stockholder;

	•		any transaction involving the corporation that has the effect of increasing the proportionate share of the stock of any class or series of the corporation beneficially owned by the interested stockholder; or

	•		the receipt by the interested stockholder of the benefit of any loans, advances, guarantees, pledges or other financial benefits provided by or through the corporation.

In general, Section 203 defines an interested stockholder as any entity or person beneficially owning 15% or more of the outstanding voting stock of the corporation and any entity or person affiliated with or controlling or controlled by any of these entities or persons.

A Delaware corporation may opt out of these provisions either with an express provision in its original certificate of incorporation or in an amendment to its certificate of incorporation or bylaws approved by its stockholders. However, we have not opted out, and do not currently intend to opt out of, these provisions. The statute could prohibit or delay mergers or other takeover or change in control attempts and, accordingly, may discourage attempts to acquire us.

Charter and Bylaws. Our restated certificate of incorporation and bylaws provide that:

	•		our bylaws may be amended or repealed only by a two-thirds vote of our board of directors or a two-thirds stockholder vote;

	•		no action can be taken by stockholders except at an annual or special meeting of the stockholders called in accordance with our bylaws, and stockholders may not act by written consent;

	•		stockholders may not call special meetings of the stockholders or fill vacancies on the board;

	•		the approval of holders of two-thirds of the shares entitled to vote at an election of directors is required to amend or repeal the provisions of our certificate of incorporation regarding the inability of stockholders to take action by written consent;

	•		our board of directors is authorized to issue preferred stock without stockholder approval; and

	•		we will indemnify officers and directors against losses that they may incur in investigations and legal proceedings resulting from their services to us, which may include services in connection with takeover defense measures.

Transfer Agent

The transfer agent and registrar for our common stock is The Bank of New York Mellon.

DESCRIPTION OF WARRANTS

We may issue warrants for the purchase of preferred stock, common stock, depositary shares, or any combination thereof. We may issue warrants independently or together with any other securities offered by any prospectus supplement and may be attached to or separate from the other offered securities. Each series of warrants will be issued under a separate warrant agreement to be entered into by us with a warrant agent. The warrant agent will act solely as our agent in connection with the warrants and will not assume any obligation or relationship of agency or trust for or with any holders or beneficial owners of warrants. Further terms of the warrants and the applicable warrant agreements will be set forth in the applicable prospectus supplement.

The applicable prospectus supplement relating to any particular issue of warrants will describe the terms of the warrants, including, as applicable, the following:

	•		the title of the warrants;

	•		the aggregate number of the warrants;

	•		the price or prices at which the warrants will be issued;

	•		the designation, terms and number of shares of preferred stock or common stock purchasable upon exercise of the warrants;

	•		the designation and terms of the offered securities, if any, with which the warrants are issued and the number of the warrants issued with each offered security;

	•		the date, if any, on and after which the warrants and the related preferred stock or common stock will be separately transferable;

	•		the price at which each share of preferred stock or common stock purchasable upon exercise of the warrants may be purchased;

	•		the date on which the right to exercise the warrants shall commence and the date on which that right shall expire;

	•		the minimum or maximum amount of the warrants which may be exercised at any one time;

	•		information with respect to book-entry procedures, if any;

	•		a discussion of certain federal income tax considerations; and

	•		any other terms of the warrants, including terms, procedures and limitations relating to the exchange and exercise of the warrants.

We and the warrant agent may amend or supplement the warrant agreement for a series of warrants without the consent of the holders of the warrants issued thereunder to effect changes that are not inconsistent with the provisions of the warrants and that do not materially and adversely affect the interests of the holders of the warrants.

PLAN OF DISTRIBUTION

We may sell the securities offered by this prospectus to one or more underwriters or dealers for public offering and sale by them or to investors directly or through agents. The accompanying prospectus supplement will set forth the terms of the offering and the method of distribution and will identify any firms acting as underwriters, dealers or agents in connection with the offering, including:

	•		the name or names of any underwriters, dealers or agents;

	•		the purchase price of the securities and the proceeds to us from the sale;

	•		any underwriting discounts and other items constituting compensation to underwriters, dealers or agents;

	•		any public offering price;

	•		any discounts or concessions allowed or reallowed or paid to dealers; and

	•		any securities exchange or market on which the securities offered in the prospectus supplement may be listed.

Only those underwriters identified in such prospectus supplement are deemed to be underwriters in connection with the securities offered in the prospectus supplement.

The distribution of the securities may be effected from time to time in one or more transactions at a fixed price or prices, which may be changed, or at prices determined as the applicable prospectus supplement specifies. The securities may be sold through a rights offering, forward contracts or similar arrangements. In connection with the sale of the securities, underwriters, dealers or agents may be deemed

to have received compensation from us in the form of underwriting discounts or commissions and also may receive commissions from securities purchasers for whom they may act as agent. Underwriters may sell the securities to or through dealers, and the dealers may receive compensation in the form of discounts, concessions or commissions from the underwriters or commissions from the purchasers for whom they may act as agent. Some of the underwriters, dealers or agents who participate in the securities distribution may engage in other transactions with, and perform other services for, us or our subsidiaries in the ordinary course of business.

We will provide in the applicable prospectus supplement information regarding any underwriting discounts or other compensation that we pay to underwriters or agents in connection with the securities offering, and any discounts, concessions or commissions which underwriters allow to dealers. Underwriters, dealers and agents participating in the securities distribution may be deemed to be underwriters, and any discounts and commissions they receive and any profit they realize on the resale of the securities may be deemed to be underwriting discounts and commissions under the Securities Act of 1933. Underwriters and their controlling persons, dealers and agents may be entitled, under agreements entered into with us, to indemnification against and contribution toward specific civil liabilities, including liabilities under the Securities Act.

The securities may or may not be listed on a national securities exchange. In connection with an offering, the underwriters may purchase and sell securities in the open market. These transactions may include short sales, stabilizing transactions and purchases to cover positions created by short sales. Short sales involve the sale by the underwriters of a greater number of securities than they are required to purchase in an offering. Stabilizing transactions consist of bids or purchases made for the purpose of preventing or retarding a decline in the market price of the securities while an offering is in progress. The underwriters also may impose a penalty bid. This occurs when a particular underwriter repays to the underwriters a portion of the underwriting discount received by it because the underwriters have repurchased securities sold by or for the account of that underwriter in stabilizing or short-covering transactions. These activities by the underwriters may stabilize, maintain or otherwise affect the market price of the securities. As a result, the price of the securities may be higher than the price that otherwise might exist in the open market. If these activities are commenced, they may be discontinued by the underwriters at any time.

LEGAL MATTERS

The validity of any securities offered by this prospectus will be passed upon for us by Pillsbury Winthrop Shaw Pittman LLP, Palo Alto, California.

EXPERTS

The consolidated financial statements of Oculus Innovative Sciences, Inc. appearing in Oculus Innovative Sciences, Inc.’s Annual Report on Form 10-K for the year ended March 31, 2007, as amended, have been audited by Marcum & Kliegman LLP, independent registered public accounting firm, as set forth in their report therein, included therein, and incorporated herein by reference. Such consolidated financial statements are incorporated herein by reference in reliance upon such report given on the authority of such firm as experts in accounting and auditing.

WHERE YOU CAN FIND MORE INFORMATION

We have filed a registration statement on Form S-3 with the SEC under the Securities Act of 1933. This prospectus is part of the registration statement but the registration statement includes and incorporates by reference additional information and exhibits. We file annual, quarterly and current reports, proxy statements and other information with the SEC. You may read and copy the registration statement and any document we file with the SEC at the public reference room maintained by the SEC at 100 F Street, N.E., Washington, D.C. 20549. You may obtain information on the operation of the public reference room by calling the SEC at 1-800-SEC-0330. The SEC also maintains a web site that contains reports, proxy and

information statements and other information regarding companies, such as ours, that file documents electronically with the SEC. The address of that site on the world wide web is http://www.sec.gov. The information on the SEC’s web site is not part of this prospectus, and any references to this web site or any other web site are inactive textual references only.

The SEC permits us to “incorporate by reference” the information contained in documents we file with the SEC, which means that we can disclose important information to you by referring you to those documents rather than by including them in this prospectus. Information that is incorporated by reference is considered to be part of this prospectus and you should read it with the same care that you read this prospectus. Later information that we file with the SEC will automatically update and supersede the information that is either contained, or incorporated by reference, in this prospectus, and will be considered to be a part of this prospectus from the date those documents are filed. We have filed with the SEC, and incorporate by reference in this prospectus:

	•		our Annual Report on Form 10-K for the year ended March 31, 2007, as amended;

	•		our Quarterly Reports on Form 10-Q for the quarters ended June 30, 2009, September 30, 2007 and December 31, 2007;

	•		our Proxy Statement on Schedule 14A filed on August 17, 2007;

	•		the description of our common stock contained in our Registration Statement on Form 8-A filed on December 15, 2006, including any amendment or report filed for the purpose of updating such description.

We also incorporate by reference all additional documents that we file with the SEC under the terms of Sections 13(a), 13(c), 14 or 15(d) of the Exchange Act that are made after the initial filing date of the registration statement of which this prospectus is a part and the effectiveness of the registration statement, as well as between the date of this prospectus and the termination of any offering of securities offered by this prospectus. We are not, however, incorporating, in each case, any documents or information that we are deemed to furnish and not file in accordance with SEC rules.

You may request a copy of any or all of the documents incorporated by reference but not delivered with this prospectus, at no cost, by writing or telephoning us at the following address and number: Investor Relations, Oculus Innovative Sciences, Inc., 1129 N. McDowell Blvd., Petaluma, California 94954, telephone (707) 782-0792. We will not, however, send exhibits to those documents, unless the exhibits are specifically incorporated by reference in those documents.

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents


	Page

About This Prospectus Supplement	ii
Prospectus Supplement Summary		S-1
Risk Factors		S-2
Forward-Looking Statements		S-15
Use of Proceeds		S-15
Plan of Distribution		S-16
Experts		S-16
Where You Can Find More Information		S-16