UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2021

or

For the Transition Period from             to             

Commission File No. 001-32919

Ascent Solar Technologies, Inc.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number including area code: 720-872-5000  

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes   ☐     No   ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act. Yes   ☐     No   ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes   ☒     No   ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).     ☒ Yes     ☐   No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐  

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes   ☐     No   ☒

As of June 30, 2021, the last business day of the registrant’s most recently completed second fiscal quarter, the aggregate market value of the registrant’s common stock held by non-affiliates was approximately $91,371,601 based upon the last reported sale price of the registrant’s common stock on that date as reported by OTC Markets Group (“OTC Markets”).

As of March 14, 2022, there were 30,586,804 shares of our common stock issued and outstanding.

ASCENT SOLAR TECHNOLOGIES, INC.

Form 10-K Annual Report

for the Fiscal Year ended December 31, 2021

Table of Contents

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K includes “forward-looking statements” that involve risks and uncertainties. Forward-looking statements include statements concerning our plans, objectives, goals, strategies, future events, future net sales or performance, capital expenditures, financing needs, plans or intentions relating to acquisitions, business trends and other information that is not historical information and, in particular, appear under headings including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business.” When used in this Annual Report, the words “estimates,” “expects,” “anticipates,” “projects,” “plans,” “intends,” “believes,” “forecasts,” “foresees,” “likely,” “may,” “should,” “goal,” “target,” and variations of such words or similar expressions are intended to identify forward-looking statements, but the absence of these words does not mean that a statement is not forward-looking. All forward-looking statements are based upon information available to us on the date of this Annual Report.

These forward-looking statements are subject to risks, uncertainties and other factors, many of which are outside of our control, that could cause actual results to differ materially from the results discussed in the forward-looking statements, including, among other things, the matters discussed in this Annual Report in the sections captioned “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Factors you should consider that could cause these differences are:

There may be other factors that could cause our actual results to differ materially from the results referred to in the forward-looking statements. We undertake no obligation to publicly update or revise forward-looking statements to reflect subsequent events or circumstances after the date made, or to reflect the occurrence of unanticipated events, except as required by law.

References to “we,” “us,” “our,” “Ascent,” “Ascent Solar” or the “Company” in this Annual Report mean Ascent Solar Technologies, Inc.

PART I

Item 1. Business

Business Overview

We target high-value specialty solar markets. These include aerospace, defense, emergency management and consumer/OEM applications. This strategy enables us to fully leverage what we believe are the unique advantages of our technology, including flexibility, durability and attractive power to weight and power to area performance. It further enables us to offer unique, differentiated solutions in large markets with less competition, and more attractive pricing.

Specifically, we focus on commercializing our proprietary solar technology in three highest-value PV verticals:

I. Aerospace: Space, Near-space and Fixed Wing UAV

II. Public Sector: Defense and Emergency Management

III. Commercial Off-grid and Portable Power

We believe the value proposition of Ascent’s proprietary solar technology not only aligns with the needs of customers in these verticals, but also overcomes many of the obstacles other solar technologies face in these unique markets. Ascent has the capability to design and develop finished products for end users in these areas as well as collaborate with strategic partners to design and develop custom integrated solutions for products like airships and fixed-wing UAVs. Ascent sees significant overlap in the needs of end users across some of these verticals and believes it can achieve economies of scale in sourcing, development, and production in commercializing products for these customers.

The integration of Ascent's solar modules into space, near space, and aeronautic vehicles with ultra-lightweight and flexible solar modules is an important market opportunity for the Company. Customers in this market have historically required a high level of durability, high voltage and conversion efficiency from solar module suppliers, and we believe our products are well suited to compete in this premium market.

Product History

In March 2008, we demonstrated initial operating capacity of our first production line by beginning production trials as an end-to-end integrated process. Initial operating capacity production trials resulted in average thin film device efficiencies of 9.5% and small area monolithically integrated module efficiencies of over 7.0%. During 2008, optimization trials resulted in thin film device efficiencies in the 9.5% to 11.5% range and corresponding module efficiencies in the 7.0% to 9.0% range. The test modules measured approximately 15 centimeters wide by 30 centimeters long, which is significant in that it demonstrates true production capability where these modules are processed side-by-side. In contrast, devices tested under laboratory conditions are usually small area in nature measuring 1 centimeter by 1 centimeter or less. During the first quarter of 2009, we began limited production of monolithically integrated flexible CIGS modules in our initial production line. Our primary business model, at that time, was based upon mass production of solar modules of varying lengths, sizes and configurations. We provided sample modules to potential customers and development partners in various industries to explore integration of our products into new applications.

In July 2009, we obtained independent verification by the U.S. Department of Energy’s National Renewable Energy Laboratory (“NREL”) that our modules of approximately 15 centimeters wide by 30 centimeters long measured 10.4% in conversion efficiency. In October 2009, NREL further verified our achievement of a manufacturing milestone of 14.0% cell efficiency as well as a peak efficiency of 11.4% for CIGS modules. Later, in December 2010, we achieved 12.1% module efficiency on the same form factor. In October 2010, we completed internal qualification testing of a flexible packaging solution which successfully passed the rigorous standard of one thousand (1,000) hours of damp heat testing (85% relative humidity and 85° C temperature) guideline set forth by International Electrotechnical Commission (“IEC”) 61646 standards for performance and long-term reliability of thin film solar modules.

In February 2010, three of our product configurations were certified by an independent laboratory on a variety of U.S. Department of Defense (“DOD”) rugged standards known as MIL-STD-810G. In October 2010, we completed full external certification under IEC 61646 at an independent laboratory of a two-meter module. Achieving this certification is required for building integrated photovoltaic (“BIPV”) and building applied photovoltaic (“BAPV”) applications used in commercial, industrial and residential rooftop markets. Certification activities will continue, as required, as we introduce new products and make changes or improvements to our already certified products.

1

In 2010, we received an award from R&D Magazine and were recognized as one of the 100 Most Innovative Technologies, based on our process of monolithic integration on polyimide substrate. In 2011, Time Magazine selected us as one of the 50 Best Inventions of the year. In 2015 Ascent Solar won its second R&D 100 Award. The 2015 award was given for the development of the MilPak™ platform, a military-grade (MIL-STD-810G tested) and fully integrated solar power generation and storage unit incorporated with a Maximum Peak Power Tracking (MPPT) management system. The MilPak platform is one of the most rugged, yet lightweight, power generation and storage solutions available, both attributes enabled by the use of Ascent’s CIGS technology.

In January 2017, Ascent was awarded a contract to supply high-voltage SuperLight thin-film CIGS PV blankets. These 50W, fully laminated, flexible blankets were manufactured using a new process that was optimized for high performance in near-space conditions at elevated temperatures, and are custom designed for easy modular integration into series and parallel configurations to achieve the desired voltage and current required for such application.

In November 2017, Ascent introduced the next generation of our USB-based portable power systems with the XD™ series. The first product introduced was the XD-12 which, like previous products, is a folding, lightweight, easily stowable, PV system with USB power regulation. Unique to this generation of PV portable power is more PV power (12 Watts) and a 2.0 Amp smart USB output to enable the XD-12 to charge most smartphones, tablets, and USB-enabled devices as fast as a wall outlet. The enhanced smart USB circuit works with the device to be charged so that the device can determine the maximum power it is able to receive from the XD-12 and ensures the best possible charging performance directly from the sun.

Also in 2017, Ascent manufactured a new micro-module for a space customer, approximately 12.8mm x 50mm (0.5in x 2.0in) in size that is ideal for both laboratory-scale environmental testing, and for subsequent integration into flight experiments.

In February 2018, the Company introduced the second product in our XD series. Delivering up to 48 Watts of solar power, we believe the durable and compact Ascent XD-48 Solar Charger is the ideal solution for charging many portable electronics and off-grid power systems. The XD-48’s versatility allows it to charge both military and consumer electronics directly from the sun wherever needed. Like the XD-12, the XD-48 has a compact and portable design, and its rugged, weather-resistant construction withstands shocks, drops, damage and even minor punctures to power through the harshest conditions.

In March 2018, we collaborated with a European based customer for their lighter-than-air, helium-filled airship project, which was based on our newly developed ultra-light modules with substrate material that was half of the thickness of our standard modules. In 2019, we completed a repeat order from the same customer who had since established its airship development operation in the US. In 2020, we received a third and enlarged order from the same customer and completed the order in the second quarter of 2021. Most recently, in the 4^th quarter of 2021 we received a fourth order with a targeted ship date in the 2^nd quarter of 2022.

On September 15, 2021, the Company entered into a Long-Term Supply and Joint Development Agreement (“JDA”) with TubeSolar AG (“TubeSolar”), a significant existing stakeholder in the Company. Under the terms of the JDA, the Company will produce, and TubeSolar will purchase, thin-film PV foils (“PV Foils”) for use in TubeSolar’s solar modules for agricultural photovoltaic (“APV”) applications that require solar foils for its production. Under the JDA, the Company will receive up (i) to $4 million of non-recurring engineering (“NRE”) fees, (ii) up to $13.5 million of payments upon achievement of certain agreed production and cost structure milestones, and (iii) product revenues from sales of PV Foils to TubeSolar. The JDA has no fixed term, and may only be terminated by either party for breach.

The Company and TubeSolar have also jointly established a subsidiary company in Germany, in which TubeSolar holds a minority stake of 30% (the “JV”). The purpose of the JV is to establish and operate a PV manufacturing facility in Germany that will produce and deliver PV Foils exclusively to TubeSolar. Until the JV facility is fully operational, PV Foils will be manufactured in the Company’s existing facility in Thornton, Colorado. The parties expect to jointly develop next generation tooling for use in manufacturing PV Foils at the JV facility. The Company purchased 17,500 shares of the JV for 1 Euro per share, on November 10, 2021.

We continue to design and manufacture PV integrated portable power applications for commercial and military users, including the US Marine Corps, US AF Special Operations Command, US Special Operations Command, US Army Special Operations Command, US Army Futures Command, and others. Due to the high durability enabled by the monolithic integration employed by our technology, the capability to customize modules into different form factors and what we believe is the industry leading light weight and flexibility provided by our modules, we believe that the potential applications for our products are extensive, including anywhere that may need power generation such as in disaster recovery and emergency preparedness, commercial and personal adventure expeditions to remote areas, humanitarian efforts in areas with poor power infrastructure, photography and filming involved in wildlife observation, to name a few.

2

Commercialization and Manufacturing Strategy

We manufacture our products by affixing a thin CIGS layer to a flexible, plastic substrate using a large format, roll-to-roll process that permits us to fabricate our flexible PV modules in an integrated sequential operation. We use proprietary monolithic integration techniques which enable us to form complete PV modules with little to no costly back-end assembly of inter-cell connections. Traditional PV manufacturers assemble PV modules by bonding or soldering discrete PV cells together. This manufacturing step typically increases manufacturing costs and, at times, proves detrimental to the overall yield and reliability of the finished product. By reducing or eliminating this added step, using our proprietary monolithic integration techniques, we believe we can achieve cost savings in, and increase the reliability of, our PV modules. All tooling necessary for us to meet our near-term production requirements is installed in our Thornton, Colorado plant.

We plan to continue the development of our current PV technology to increase module efficiency, improve our manufacturing tooling and process capabilities and reduce manufacturing costs. We also plan to continue to take advantage of research and development contracts to fund a portion of this development.

Advantages of CIGS on a Flexible Plastic Substrate

Thin film PV solutions differ based on the type of semiconductor material chosen to act as a sunlight absorbing layer, and also on the type of substrate on which the sunlight absorbing layer is affixed. To the best of our knowledge, we believe we are the only company in the world currently focused on commercial scale production of PV modules using CIGS on a flexible, plastic substrate with monolithic integration. We utilize CIGS as a semiconductor material because, at the laboratory level, it has a higher demonstrated cell conversion efficiency than amorphous silicon (“a-Si”) and cadmium telluride (“CdTe”). We also believe CIGS offers other compelling advantages over both a-Si and CdTe, including:

We believe our choice of substrate material further differentiates us from other thin-film PV manufacturers. We believe the use of a flexible, lightweight, insulating substrate that is easier to install provides clear advantages for our target markets, especially where rigid substrates are unsuitable. We also believe our use of a flexible, plastic substrate provides us significant cost advantages because it enables us to employ monolithic integration techniques on larger components, which we believe are unavailable to manufacturers who use flexible, metal substrates. Accordingly, we are able to significantly reduce part count, thereby reducing the need for costly back end assembly of inter cell connections. As the only company, to our knowledge, focused on the commercial production of PV modules using CIGS on a flexible, plastic substrate with monolithic integration, we believe we have the opportunity to address the defense, aerospace, transportation, off grid, portable power and other weight-sensitive markets with transformational high quality, value added product applications. It is these same unique features and our overall manufacturing process that enable us to produce extremely robust, light and flexible products.

Competitive Strengths

We believe we possess a number of competitive strengths that provide us with an advantage over our competitors.

3

Markets and Marketing Strategy

We target high-value specialty solar markets. These include aerospace, defense, emergency management and consumer/OEM applications. This strategy enables us to fully leverage the unique advantages of our technology, including flexibility, durability and attractive power to weight and power to area performance. It further enables us to offer unique, differentiated solutions in large markets with less competition, and more attractive pricing.

Specifically, we focus on commercializing our proprietary solar technology in three highest-value PV verticals:

I. Aerospace: Space, Near-space and Fixed Wing UAV

II. Public Sector: Defense and Emergency Management

III. Commercial Off-grid and Portable Power

We believe the value proposition of Ascent’s proprietary solar technology not only aligns with the needs of customers in these verticals, but also overcomes many of the obstacles other solar technologies face in these unique markets. Ascent has the capability to design and develop finished products for end users in these areas as well as collaborate with strategic partners to design and develop custom integrated solutions for products like airships and fixed-wing UAVs. Ascent sees significant overlap in the needs of end users across some of these verticals and believes it can achieve economies of scale in sourcing, development, and production in commercializing products for these customers.

The integration of Ascent's solar modules into space, near space, and aeronautic vehicles with ultra-lightweight and flexible solar modules is an important market opportunity for the Company. Customers in this market have historically required a high level of durability, high voltage and conversion efficiency from solar module suppliers, and we believe our products are well suited to compete in this premium market. In May 2014, together with our partners, Silent Falcon UAS Technologies and Bye Aerospace, we announced the successful first flight of a production version of the Silent Falcon™ Unmanned Aircraft Systems, powered by Ascent’s ultra-lightweight, flexible PV modules. In July 2014, our ultra-lightweight, flexible PV modules were selected by Vanguard Space Technologies for their NASA Small Business Innovative Research program. The NASA program is intended to develop an economical, lightweight alternative to existing and emerging high-cost solar arrays for high-power space applications. We expect opportunities in this segment to develop rapidly due to customers' extensive development, testing and evaluation processes.

4

In March 2016, the Company announced a major breakthrough of our high-voltage superlight bare modules, achieving a power-to-weight ratio of 1,700 watts per kilogram at AM0 environment. What we believe is the  “best-in-class” specific power is crucial to the aerospace industry where every pound of weight reduction would translate to incremental cost savings or increased in payloads. In December 2016, Ascent was selected by the Japan Aerospace Exploration Agency (“JAXA”) as part of their next round of evaluations for providing solar technology for an upcoming mission to Jupiter, as well as to address additional missions. This decision followed an earlier round of investigation with promising results, during which the Company's flexible, monolithically integrated CIGS solar module was subjected to environmental extremes and continued to operate well. During the first phase of JAXA's evaluation, Ascent's PV was successfully tested below -146°C (-231°F) and up to +190°C (+374 °F), and to only 4% of the sunlight generally received in earth's orbit. In addition, JAXA has subjected Ascent's PV to radiation and mechanical testing.

In 2017 we continued to solidify our position in the space and near-space markets; these challenging requirements and environments allow for the full utilization of what we believe is the unique nature and advantages of our lightweight, flexible monolithically integrated CIGS PV. Through continued work in the PV-powered drone field, Ascent made significant strides in providing PV power to high-altitude airships and next-generation space applications.

In January 2017, Ascent was awarded a contract to supply high-voltage SuperLight thin-film CIGS PV blankets. These 50W, fully laminated, flexible blankets were manufactured using a new process that was optimized for high performance in near-space conditions at elevated temperatures, and are custom designed for easy modular integration into series and parallel configurations to achieve the desired voltage and current required for such application.

In November 2017, Ascent fulfilled a third order from JAXA for custom PV products designed specifically for their upcoming solar sail deployment demonstration project. This project was comprised of small area test cells and large, 19.5cm x 30cm monolithically integrated modules, all on a very thin, 25-micron (0.001 inch) plastic substrate which is half the thickness of Ascent’s production substrate for a standard product. In space, near-space, and drone applications, the PV substrate accounts for a significant portion of the product’s overall mass; the PV construction on the new 25-micron substrates represents a major breakthrough for these markets. JAXA placed this order after achieving the desired experimental results from the previous shipments and subsequent electrical, mechanical and environmental testing. The 19.5cm x 30cm module is a custom design to match the anticipated deployment mechanism and PV layout for the final Jovian spacecraft. We continue to receive testing orders from JAXA.

Also in 2017, Ascent fulfilled a new order, with another repeat space customer, to manufacture a new micro-module, approximately 12.8mm x 50mm (0.5in x 2.0in) in size that is ideal for both laboratory-scale environmental testing, and for subsequent integration into flight experiments.

In 2015 Ascent Solar won its second R&D 100 Award, the 2015 award was given for the development of the MilPak platform, a military-grade solar power generation and storage unit. The MilPak platform is one of the most rugged, yet lightweight, power generation and storage solutions available, both attributes enabled by the use of Ascent’s CIGS technology.

The military market has a unique set of requirements we believe are well suited to our products. When integrated with fabric to form re-deployable arrays, our highly efficient, rugged, lightweight modules may allow soldiers to minimize battery loads, reduce the use of conventional fuels, and increase safety through the streamlining of fuel transport operations, providing the front-line units with maximum resilience and helping to increase operational efficiency. We are also working to expand our foldable line of outdoor solar chargers, such as the XD-12 and the XD-48, which are well suited for the individual soldier or for the bigger power needs of a platoon with the ability of several chargers to be strung together. Our modules can also provide a reliable source of renewable power in remote areas, regardless of local infrastructure. We will continue to seek to reach the military market through partnerships with top systems providers, by providing Government Service Administration Letters of Supply, and through direct sales and other blanket purchase agreements with the government.

Transportation integrated PV, or integration of our flexible solar modules with vehicles such as commercial trucks, buses, trains and passenger cars, is another market segment that we believe represents a significant opportunity. Due to their flexible form and durable, lightweight properties, our modules can be fitted to the exterior of various vehicles to provide supplemental power without significantly affecting the aerodynamics, weight or aesthetics of the vehicle. We are currently working with multiple integrators and OEMs to develop effective value-added solutions for this market.

During the third quarter of 2017, Ascent Solar demonstrated its breadth of capabilities at the US Special Operations Command (“SOCOM”) exclusive Technical Experimentation (“TE”) 17-3 Event in Washington, DC. SOCOM is tasked, by the Department of Defense (“DoD”), with providing Special Operations Forces (“SOF”) with the latest war fighting technology available; in support of this effort, SOCOM sponsors an annual TE event.   In July of 2017, SOCOM requested the participation

5

of companies who have proficiency in the areas of Satellite Communication (“SATCOM”) and Unattended Ground Sensors (“UGS”) for a TE event.   Over 30 companies were selected to participate, and Ascent Solar was one of only 2 companies selected to participate who didn’t actually make SATCOM or UGS products.  Ascent Solar was selected on the basis and recognition that one of the primary issues facing the DoD today is the ability to power all of their war fighting technology.   Ascent’s diverse line-up of rugged and lightweight portable solar products offers the potential for the DoD to generate unattended ongoing power, which could save lives and increase the efficiency of the war fighting effort.  Ascent was honored to be chosen to participate, and the assessed score we received is indicative of a capability that has “high potential for SOF use with few limitations”. 

During the third quarter of 2018, Ascent Solar was once again selected to demonstrate its breadth of capabilities at the SOCOM exclusive TE 18-3 Event in Washington, DC. In July of 2018, SOCOM requested the participation of companies who have proficiency in the areas of Intelligence, Surveillance and Reconnaissance (ISR), Small Unmanned Aerial Systems (SUAS) and Mobility for the TE event.  Over 50 companies were selected to participate, and Ascent Solar was one of only 2 companies selected for a second straight year. 

We continue to supply our strategic partners with PV modules to support their development, testing and certification of new integrated PV products, including product testing by several branches of the U.S. military. We believe that our high-power density flexible solar modules enable new applications for solar power. By creating mutually beneficial partnerships and strategically penetrating the markets discussed above, we plan to develop the landscape of mobile solar power generation with advanced technology end products.

During 2021, the ASTI team further advanced product acceptance into the highly stringent space market with demonstrated solar module survivability under the guidance of NASA Marshal Space Flight Center (MSFC) MISSE X flight experiment on the International Space Station (ISS), advancing our Technology Readiness Level (TRL) to 6, with subsequent flights in 2022-23, both NASA and commercial, intended to achieve TRL 7. TRL 8 is commonly accepted as space qualified. Also during 2021, the ASTI team was able to utilize an ultra-thin lamination made from the coating material used during MISSE X to build custom modules for a customer to be tested for a future flight.

Competition

We have pivoted our strategic focus away from large scale utility projects of the traditional solar markets. We believe our thin film, monolithically integrated CIGS technology enables us to deliver sleek, lightweight, rugged, high performance solutions to serve these markets as competitors from other thin film and c-Si companies emerge. The landscape of thin film manufacturers encompasses a broad mix of technology platforms at various stages of development and consists of a number of medium and small companies.

The market for traditional, grid connected PV products is dominated by large manufacturers of c-Si technology, although thin film technology on glass has begun to emerge among the major players. We anticipate that while these large manufacturers may continue to dominate the market with their silicon-based products, thin film manufacturers will likely capture an increasingly larger share of the market, as is evident from the success of First Solar (CdTe) and Solar Frontier (CIGS), both among the top 20 producers worldwide. In 2019, crystalline silicon PV technology represented over 90% of global market revenue and production, with the balance captured by thin film. Approximately half of thin film production is CdTe production, with the other half being split between CIGS and a-Si.

We believe that our modules offer unique advantages. Their flexibility, low areal density (mass per unit area), and high specific power (power per unit mass) enable use on weight-sensitive applications, such as portable power, conformal aircraft surfaces, high altitude long endurance (HALE) fixed wing and lighter than air (LTA) vehicles, and space applications that are unsuitable for glass-based modules. Innovative product design, customer focused development, and our rapid prototyping capability yield modules that could be integrated into virtually any product to create a source of renewable energy. Whether compared to glass based or other flexible modules, our products offer competitive advantages making them unique in comparison to competing products. We consider PowerFilm Solar, Global Solar, MiaSolé, and Flisom to be our closest competitors in terms of technology in the specialty PV market.

6

Research and Development and Intellectual Property

We intend to continue to invest in research and development in order to provide near term improvements to our manufacturing process and products, as well as to identify next generation technologies relevant to both our existing and potential new markets. During the years ended December 31, 2021 and 2020 we incurred approximately $4,140,319 and $1,165,193, respectively, in research and development costs, which include research and development incurred in relation to our government contracts, as well as manufacturing costs incurred while developing our product lines and manufacturing process.

Our technology was initially developed at ITN beginning in 1994. In early 2006, ITN assigned to us certain CIGS PV-specific technologies, and granted to us a perpetual, exclusive, royalty free, worldwide license to use these technologies in connection with the manufacture, development, marketing and commercialization of CIGS PV to produce solar power. In addition, certain of ITN’s existing and future proprietary process and control technologies, although nonspecific to CIGS PV, were assigned to us. ITN retained the right to conduct research and development activities in connection with PV materials, and we agreed to grant a license back to ITN for improvements to the licensed technologies and intellectual property outside of the CIGS PV field.

We protect our intellectual property through a combination of trade secrets and patent protections. We own the following patents:

Issued Patents and Registrations

7

Suppliers

We rely on several unaffiliated companies to supply certain raw materials used during the fabrication of our PV modules and PV integrated electronics. We acquire these materials on a purchase order basis and do not have long term purchase quantity commitments with the suppliers, although we may enter into such contracts in the future. We currently acquire all of our high temperature plastic from one supplier, although alternative suppliers of similar materials exist. We purchase component molybdenum, copper, indium, gallium, selenium and indium tin oxides from a variety of suppliers. We also currently are in the process of identifying and negotiating arrangements with alternative suppliers of materials in the United States and Asia.

The manufacturing equipment and tools used in our production process have been purchased from various suppliers in Europe, the United States and Asia. Although we have had good relations with our existing equipment and tools suppliers, we monitor and explore opportunities for developing alternative sources to drive our manufacturing costs down.

Employees

As of December 31, 2021, we had 51 full-time and 3 part-time employees.

Company History

We were formed in October 2005 from the separation by ITN of its Advanced Photovoltaic Division and all of that division’s key personnel and core technologies. ITN, a private company incorporated in 1994, is an incubator dedicated to the development of thin film, PV, battery, fuel cell and nanotechnologies. Through its work on research and development contracts for private and government entities, ITN developed proprietary processing and manufacturing know-how applicable to PV products generally, and to CIGS PV products in particular. Our company was established by ITN to commercialize its investment in CIGS PV technologies. In January 2006, ITN assigned to us all its CIGS PV technologies and trade secrets and granted to us a perpetual, exclusive, royalty free worldwide license to use certain of ITN’s proprietary process, control and design technologies in the production of CIGS PV modules. Upon receipt of the necessary government approvals in January 2007, ITN assigned government funded research and development contracts to us and also transferred the key personnel working on the contracts to us.

Corporate Information

We were incorporated under the laws of Delaware in October 2005. Our principal business office is located at 12300 Grant Street, Thornton, Colorado 80241, and our telephone number is (720) 872-5000. Our website address is www.AscentSolar.com. Information contained on our website or any other website does not constitute, and should not be considered, part of this Annual Report.

Available Information

We file with the Securities and Exchange Commission (“SEC”) our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to those reports, proxy statements and registration statements. Such filings are available to the public over the internet at the SEC’s website at http://www.sec.gov. We make available free of charge on, or through, our website at www.AscentSolar.com our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (“Exchange Act”) as soon as reasonably practicable after we file these materials with the SEC.

8

Item 1A. Risk Factors

The risks included here are not exhaustive or exclusive. Other sections of this Annual Report may include additional factors which could adversely affect our business, results of operations and financial performance. We operate in a very competitive and rapidly changing environment. New risk factors emerge from time to time, and it is not possible for management to predict all such risk factors, nor can it assess the impact of all such risk factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements. Given these risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results.

Risks related to the Coronavirus and COVID-19 Pandemic

The COVID-19 pandemic in the United States and world-wide has caused business disruption which may negatively impact the Company’s operations and financial results. Public health officials have recommended and mandated precautions to mitigate the spread of COVID-19, including prohibitions on travel, congregating in heavily populated areas and stat-at-home orders or similar measures.

The COVID-19 pandemic affected the Company in many ways just as the whole world experienced. These included but were not limited to:

These and other impacts of the COVID-19 pandemic could have the effect of heightening many of the other risk factors disclosed in this Annual Report on Form 10-K. The ultimate impact depends on the severity and duration of the current COVID-19 pandemic and actions taken by governmental authorities and other third parties in response, each of which is uncertain, rapidly changing and difficult to predict. Any of these disruptions could adversely impact our business and results of operations.

Risks Relating to Our Business

Our continuing operations will require additional capital which we may not be able to obtain on favorable terms, if at all, or without dilution to our stockholders.  Since inception, we have incurred significant losses. We expect to continue to incur net losses in the near term. For the year ended December 31, 2021, our cash used in operations was $9,404,443. At December 31, 2021, we had cash and equivalents on hand of $5,961,760.

Although we have commenced production at our manufacturing facility, we do not expect that sales revenue and cash flows will be sufficient to support operations and cash requirements until we have fully implemented our new strategy of focusing on high value PV products. Product revenues did not result in a positive cash flow for the 2021 year, and are not anticipated to result in a positive cash flow for the next twelve months.

During 2021 and 2020, we entered into multiple financing agreements to fund operations, raising an aggregate of $18,250,000 in net proceeds. We do not expect that sales revenue and cash flows will be sufficient to support operations and cash requirements for the foreseeable future, and we will depend on raising additional capital to maintain operations until we become profitable. There is no assurance that we will be able to raise additional capital on acceptable terms or at all. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our existing stockholders could be significantly diluted, and these newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we raise additional funds through debt financing, which may involve restrictive covenants, our ability to operate our business may be restricted. If adequate funds are not available or are not available on acceptable terms, if and when needed, our ability to fund our operations, take advantage of unanticipated opportunities, develop or enhance our products, expand capacity or otherwise respond to competitive pressures could be significantly limited, and our business, results of operations and financial condition could be materially and adversely affected.

9

Our auditors have expressed substantial doubt about our ability to continue as a going concern.  Our auditors’ report on our December 31, 2021 consolidated financial statements expresses an opinion that our capital resources as of the date of their audit report were not sufficient to sustain operations or complete our planned activities for the year 2022 unless we raised additional funds. Additionally, as a result of the Company’s recurring losses from operations, and the need for additional financing to fund its operating and capital requirements, there is uncertainty regarding the Company’s ability to maintain liquidity sufficient to operate its business effectively, which raises doubt as to the Company’s ability to continue as a going concern. Management cannot provide any assurances that the Company will be successful in accomplishing any of its plans. Our December 31, 2021 consolidated financial statements do not include any adjustments that might be necessary should the Company be unable to continue as a going concern.

We have a limited history of operations, have not generated significant revenue from operations and have had limited production of our products.  We have a limited operating history and have generated limited revenue from operations. Currently we are producing products in quantities necessary to meet current demand. Under our current business plan, we expect losses to continue until annual revenues and gross margins reach a high enough level to cover operating expenses. Our ability to achieve our business, commercialization and expansion objectives will depend on a number of factors, including whether:

Each of these factors is critical to our success and accomplishing each of these tasks may take longer or cost more than expected or may never be accomplished. It also is likely that problems we cannot now anticipate will arise. If we cannot overcome these problems, our business, results of operations and financial condition could be materially and adversely affected.

We have to date incurred net losses and may be unable to generate sufficient sales in the future to become profitable.  We incurred a net loss of $6,000,003 for the year ended December 31, 2021 and reported an accumulated deficit of $427,782,788 as of December 31, 2021. We expect to incur net losses in the near term. Our ability to achieve profitability depends on a number of factors, including market acceptance of our specialty PV products at competitive prices. If we are unable to raise additional capital and generate sufficient revenue to achieve profitability and positive cash flows, we may be unable to satisfy our commitments and may have to discontinue operations.

10

Our business is based on a new technology, and if our PV modules or processes fail to achieve the performance and cost metrics that we expect, then we may be unable to develop demand for our PV modules and generate sufficient revenue to support our operations.  Our CIGS on flexible plastic substrate technology is a relatively new technology. Our business plan and strategies assume that we will be able to achieve certain milestones and metrics in terms of throughput, uniformity of cell efficiencies, yield, encapsulation, packaging, cost and other production parameters. We cannot assure you that our technology will prove to be commercially viable in accordance with our plan and strategies. Further, we or our strategic partners and licensees may experience operational problems with such technology after its commercial introduction that could delay or defeat the ability of such technology to generate revenue or operating profits. If we are unable to achieve our targets on time and within our planned budget, then we may not be able to develop adequate demand for our PV modules, and our business, results of operations and financial condition could be materially and adversely affected.

Our failure to further refine our technology and develop and introduce improved PV products could render our PV modules uncompetitive or obsolete and reduce our net sales and market share.  Our success requires us to invest significant financial resources in research and development to keep pace with technological advances in the solar energy industry. However, research and development activities are inherently uncertain, and we could encounter practical difficulties in commercializing our research results. Our expenditures on research and development may not be sufficient to produce the desired technological advances, or they may not produce corresponding benefits. Our PV modules may be rendered obsolete by the technological advances of our competitors, which could harm our results of operations and adversely impact our net sales and market share.

Failure to expand our manufacturing capability successfully at our facilities would adversely impact our ability to sell our products into our target markets and would materially and adversely affect our business, results of operations and financial condition.  Our growth plan calls for production and operations at our facility. Successful operations will require substantial engineering and manufacturing resources and are subject to significant risks, including risks of cost overruns, delays and other risks, such as geopolitical unrest that may cause us not to be able to successfully operate in other countries. Furthermore, we may never be able to operate our production processes in high volume or at the volumes projected, make planned process and equipment improvements, attain projected manufacturing yields or desired annual capacity, obtain timely delivery of components, or hire and train the additional employees and management needed to scale our operations. Failure to meet these objectives on time and within our planned budget could materially and adversely affect our business, results of operations and financial condition.

We may be unable to manage the expansion of our operations and strategic alliances effectively.  We will need to significantly expand our operations and form beneficial strategic alliances in order to reduce manufacturing costs through economies of scale and partnerships, secure contracts of commercially material amounts with reputable customers and capture a meaningful share of our target markets. To date, we have not formed such strategic alliances and can give no assurances that we will be able to do so. To manage the expansion of our operations and alliances, we will be required to improve our operational and financial systems, oversight, procedures and controls and expand, train and manage our growing employee base. Our management team will also be required to maintain and cultivate our relationships with partners, customers, suppliers and other third parties and attract new partners, customers and suppliers. In addition, our current and planned operations, personnel, facility size and configuration, systems and internal procedures and controls, even when augmented through strategic alliances, might be inadequate or insufficient to support our future growth. If we cannot manage our growth effectively, we may be unable to take advantage of market opportunities, execute our business strategies or respond to competitive pressures, resulting in a material and adverse effect to our business, results of operations and financial condition.

We depend on a limited number of third-party suppliers for key raw materials, and their failure to perform could cause manufacturing delays and impair our ability to deliver PV modules to customers in the required quality and quantity and at a price that is profitable to us. Our failure to obtain raw materials and components that meet our quality, quantity and cost requirements in a timely manner could interrupt or impair our ability to manufacture our products or increase our manufacturing cost. Most of our key raw materials are either sole sourced or sourced by a limited number of third-party suppliers. As a result, the failure of any of our suppliers to perform could disrupt our supply chain and impair our operations. Many of our suppliers are small companies that may be unable to supply our increasing demand for raw materials as we implement our planned expansion. We may be unable to identify new suppliers in a timely manner or on commercially reasonable terms. Raw materials from new suppliers may also be less suited for our technology and yield PV modules with lower conversion efficiencies, higher failure rates and higher rates of degradation than PV modules manufactured with the raw materials from our current suppliers.

11

Our products may never gain sufficient market acceptance, in which case we would be unable to sell our products or achieve profitability. Demand for our products may never develop sufficiently, and our products may never gain market acceptance, if we fail to produce products that compare favorably against competing products on the basis of cost, quality, weight, efficiency and performance. Demand for our products also will depend on our ability to develop and maintain successful relationships with key partners, including distributors, retailers, OEMs, system integrators and value-added resellers. If our products fail to gain market acceptance as quickly as we envision or at all, our business, results of operations and financial condition could be materially and adversely affected.

We are targeting emerging markets for a significant portion of our planned product sales. These markets are new and may not develop as rapidly as we expect or may not develop at all.  Our target markets include portable power, defense, transportation, space and near space markets. Although certain areas of these markets have started to develop, some of them are in their infancy. We believe these markets have significant long-term potential; however, some or all of these markets may not develop and emerge as we expect. If the markets do develop as expected, there may be other products that could provide a superior product or a comparable product at lower prices than our products. If these markets do not develop as we expect, or if competitors are better able to capitalize on these markets our revenues and product margins may be negatively affected.

Failure to consummate strategic relationships with key partners in our various target market segments, such as defense and portable power, transportation, space and near space, and the respective implementations of the right strategic partnerships to enter these various specified markets, could adversely affect our projected sales, growth and revenues.  We intend to sell thin-film PV modules for use in portable power systems, defense and portable power systems, transportation, space and near space solar panel applications. Our marketing and distribution strategy is to form strategic relationships with distributors, value added resellers and e-commerce to provide a foothold in these target markets. If we are unable to successfully establish working relationships with such market participants or if, due to cost, technical or other factors, our products prove unsuitable for use in such applications; our projected revenues and operating results could be adversely affected.

If sufficient demand for our products does not develop or takes longer to develop than we anticipate, we may be unable to grow our business, generate sufficient revenue to attain profitability or continue operations.  The solar energy industry is currently dominated by the rigid crystalline silicon based technology. The extent to which our flexible thin film PV modules will be widely adopted is uncertain. Many factors, of which several are outside of our control, may affect the viability of widespread adoption and demand for our flexible PV modules.

We face intense competition from other manufacturers of thin-film PV modules and other companies in the solar energy industry.  The solar energy and renewable energy industries are both highly competitive and continually evolving as participants strive to distinguish themselves within their markets and compete with the larger electric power industry. We believe our main sources of competition are other thin film PV manufacturers and companies developing other solar solutions, such as solar thermal and concentrated PV technologies.

Many of our existing and potential competitors have substantially greater financial, technical, manufacturing and other resources than we do. A competitor’s greater size provides them with a competitive advantage because they often can realize economies of scale and purchase certain raw materials at lower prices. Many of our competitors also have greater brand name recognition, established distribution networks and large customer bases. In addition, many of our competitors have well-established relationships with our current and potential partners and distributors and have extensive knowledge of our target markets. As a result of their greater size, these competitors may be able to devote more resources to the research, development, promotion and sale of their products or respond more quickly to evolving industry standards and changes in market conditions than we can. Our failure to adapt to changing market conditions and to compete successfully with existing or future competitors could materially and adversely affect our business, results of operations and financial condition.

Problems with product quality or performance may cause us to incur warranty expenses, damage our market reputation and prevent us from maintaining or increasing our market share. If our products fail to perform as expected while under warranty, or if we are unable to support the warranties, sales of our products may be adversely affected or our costs may increase, and our business, results of operations and financial condition could be materially and adversely affected.

We may also be subject to warranty or product liability claims against us that are not covered by insurance or are in excess of our available insurance limits. In addition, quality issues can have various other ramifications, including delays in the recognition of revenue, loss of revenue, loss of future sales opportunities, increased costs associated with repairing or replacing products, and a negative impact on our goodwill and reputation. The possibility of future product failures could cause us to incur substantial expenses to repair or replace defective products. Furthermore, widespread product failures may damage our market reputation and reduce our market share causing sales to decline.

12

Currency translation risk may negatively affect our net sales, cost of equipment, cost of sales, gross margin or profitability and could result in exchange losses.  Although our reporting currency is the U.S. dollar, we may conduct business and incur costs in the local currencies of other countries in which we operate, make sales or buy equipment or materials. As a result, we are subject to currency translation risk. Our future contracts and obligations may be exposed to fluctuations in currency exchange rates, and, as a result, our capital expenditures or other costs may exceed what we have budgeted. Further, changes in exchange rates between foreign currencies and the U.S. dollar could affect our net sales and cost of sales and could result in exchange losses. We cannot accurately predict future exchange rates or the overall impact of future exchange rate fluctuations on our business, results of operations and financial condition.

A significant increase in the price of our raw materials could lead to higher overall costs of production, which would negatively affect our planned product margins, or make our products uncompetitive in the PV market.  Our raw materials include high temperature plastics and various metals. Significant increases in the costs of these raw materials may impact our ability to compete in our target markets at a price sufficient to produce a profit.

Our intellectual property rights or our means of enforcing those rights may be inadequate to protect our business, which may result in the unauthorized use of our products or reduced sales or otherwise reduce our ability to compete.  Our business and competitive position depends upon our ability to protect our intellectual property rights and proprietary technology, including any PV modules that we develop. We attempt to protect our intellectual property rights, primarily in the United States, through a combination of patent, trade secret and other intellectual property laws, as well as licensing agreements and third-party nondisclosure and assignment agreements. Because of the differences in foreign patent and other laws concerning intellectual property rights, our intellectual property rights may not receive the same degree of protection in foreign countries as they would in the United States. Our failure to obtain or maintain adequate protection of our intellectual property rights, for any reason, could have a materially adverse effect on our business, results of operations and financial condition. Further, any patents issued in connection with our efforts to develop new technology for PV modules may not be broad enough to protect all of the potential uses of our technology.

We also rely on unpatented proprietary technology. It is possible others will independently develop the same or similar technology or otherwise obtain access to our unpatented technology. To protect our trade secrets and other proprietary information, we require our employees, consultants and advisors to execute proprietary information and invention assignment agreements when they begin working for us. We cannot assure these agreements will provide meaningful protection of our trade secrets, unauthorized use, misappropriation or disclosure of trade secrets, know how or other proprietary information. Despite our efforts to protect this information, unauthorized parties may attempt to obtain and use information that we regard as proprietary. If we are unable to maintain the proprietary nature of our technologies, we could be materially adversely affected.

In addition, when others control the prosecution, maintenance and enforcement of certain important intellectual property, such as technology licensed to us, the protection and enforcement of the intellectual property rights may be outside of our control. If the entity that controls intellectual property rights that are licensed to us does not adequately protect those rights, our rights may be impaired, which may impact our ability to develop, market and commercialize our products. Further, if we breach the terms of any license agreement pursuant to which a third party licenses us intellectual property rights, our rights under that license may be affected and we may not be able to continue to use the licensed intellectual property rights, which could adversely affect our ability to develop, market and commercialize our products.

Third-party claims of intellectual property infringement may negatively impact the Company and the Company’s future financial results. The Company’s commercial success depends in part on its ability to develop, manufacture, market and sell its products and use its proprietary technology without infringing the patent rights of third parties. Numerous third-party U.S. and non-U.S. issued patents and pending applications exist in the area of the Company’s products. The Company may in the future pursue available proceedings in the U.S. and foreign patent offices to challenge the validity of patents and patent applications. In addition, or alternatively, the Company may consider whether to seek to negotiate a license of rights to technology covered by one or more of such patents and patent applications. If any patents or patent applications cover the Company’s products or technologies, the Company may not be free to manufacture or market its products as planned, absent such a license, which may not be available to the Company on commercially reasonable terms, or at all.

It is also possible that the Company has failed to identify relevant third-party patents or applications. For example, some applications may be held under government secrecy and US patent applications that will not be filed outside the United States remain confidential unless and until patents issue. Moreover, it is difficult for industry participants, including the Company, to identify all third-party patent rights that may be relevant to its product candidates and technologies because patent searching is imperfect due to differences in terminology among patents, incomplete databases and the difficulty in assessing the meaning

13

of patent claims. The Company may fail to identify relevant patents or patent applications or may identify pending patent applications of potential interest but incorrectly predict the likelihood that such patents may issue with claims of relevance to its technology. In addition, the Company  may be unaware of one or more issued patents that would be infringed by the manufacture, sale or use of a current or future products, or the Company may incorrectly conclude that a third-party patent is invalid, unenforceable or not infringed by its activities. Additionally, pending patent applications that have been published can, subject to specified limitations, be later amended in a manner that could cover the Company’s technologies, its products or the use of its products.

There have been many lawsuits and other proceedings filed by third parties involving patent and other intellectual property rights, including patent infringement lawsuits, interferences, oppositions, and reexamination, post-grant review and equivalent proceedings before the USPTO and corresponding foreign patent offices. Numerous U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in the fields in which the Company is developing products or has existing products. As the industries the Company is involved in expand and more patents are issued, the risk increases that its product candidates may be subject to claims of infringement of the patent rights of third parties.

Parties making claims against the Company may obtain injunctive or other equitable relief, which could effectively block its ability to further develop and commercialize the Company’s products. Defense of these claims, regardless of their merit, would involve substantial litigation expense and would be a substantial diversion of employee resources from the Company’s business. In the event of a successful claim of infringement against the Company, the Company may have to pay substantial damages, including treble damages and attorneys’ fees for willful infringement, pay royalties, redesign its infringing products or obtain one or more licenses from third parties, which may be impossible or require substantial time and monetary expenditure.

Our future success depends on retaining our Chief Executive Officer and existing management team and hiring and assimilating new key employees, and our inability to attract or retain key personnel would materially harm our business and results of operations.  Our success depends on the continuing efforts and abilities of our executive officers, including Mr. Victor Lee, our President and Chief Executive Officer, our other executive officers, and key technical personnel. Our future success also will depend on our ability to attract and retain highly skilled employees, including management, technical and sales personnel. The loss of any of our key personnel, the inability to attract, retain or assimilate key personnel in the future, or delays in hiring required personnel could materially harm our business, results of operations and financial condition.

Our Chief Executive Officer is also employed by another company.  Our Chief Executive Officer serves as chief financial officer of another unrelated public company. This employment may compete for our Chief Executive Officer’s full attention to the Company. The Chief Executive Officer is only required to devote as much time and attention to the affairs of the Company as he deems appropriate and may engage in other business activities and/or other unrelated employment.

Our PV modules contain limited amounts of cadmium sulfide and claims of human exposure or future regulations could have a material adverse effect on our business, results of operations and financial condition.  Our PV modules contain limited amounts of cadmium sulfide, which is regulated as a hazardous material due to the adverse health effects that may arise from human exposure and is banned in certain countries. We cannot assure you that human or environmental exposure to cadmium sulfide used in our PV modules will not occur. Any such exposure could result in third party claims against us, damage to our reputation and heightened regulatory scrutiny of our PV modules. Future regulation relating to the use of cadmium in various products could force us to seek regulatory exemptions or impact the manufacture and sale of our PV modules and could require us to incur unforeseen environmental related costs. The occurrence of future events such as these could limit our ability to sell and distribute our PV modules, and could have a material adverse effect on our business, results of operations and financial condition.

Environmental obligations and liabilities could have a substantial negative impact on our financial condition, cash flows and profitability.  We are subject to a variety of federal, state, local and foreign laws and regulations relating to the protection of the environment, including those governing the use, handling, generation, processing, storage, transportation and disposal of, or human exposure to, hazardous and toxic materials (such as the cadmium used in our products), the discharge of pollutants into the air and water, and occupational health and safety. We are also subject to environmental laws which allow regulatory authorities to compel, or seek reimbursement for, cleanup of environmental contamination at sites now or formerly owned or operated by us and at facilities where our waste is or has been disposed. We may incur significant costs and capital expenditures in complying with these laws and regulations. In addition, violations of, or liabilities under, environmental laws or permits may result in restrictions being imposed on our operating activities or in our being subjected to substantial fines, penalties, criminal proceedings, third party property damage or personal injury claims, cleanup costs or other costs. Also, future developments such as more aggressive enforcement policies, the implementation of new, more stringent laws and regulations,

14

or the discovery of presently unknown environmental conditions or noncompliance may require expenditures that could have a material adverse effect on our business, results of operations and financial condition. Further, greenhouse gas emissions have increasingly become the subject of international, national, state and local attention. Although future regulations could potentially lead to an increased use of alternative energy, there can be no guarantee that such future regulations will encourage solar technology. Given our limited history of operations, it is difficult to predict future environmental expenses.

We currently anticipate having substantial international operations that will subject us to a number of risks, including potential unfavorable political, regulatory, labor and tax conditions in foreign countries.  We entered into the JDA with TubeSolar, a related party (see “Item 1 Business” for additional detail), and expect to expand our operations abroad in the future and, as a result, we may be subject to the legal, political, social and regulatory requirements and economic conditions of foreign jurisdictions. Risks inherent to international operations, include, but are not limited to, the following:

Our business in foreign markets will require us to respond to rapid changes in market conditions in these countries. Our overall success as an international business depends, in part, on our ability to succeed in differing legal, regulatory, economic, social and political conditions. If we are not able to develop and implement policies and strategies that are effective in each location where we will do business, then our business, results of operations and financial condition could be materially and adversely affected.

Existing regulations and policies and changes to these regulations and policies may present technical, regulatory and economic barriers to the purchase and use of PV products, which may significantly reduce demand for our PV products.  The market for electricity generation products is heavily influenced by foreign, U.S., state and local government regulations and policies concerning the electric utility industry, as well as policies promulgated by electric utilities. These regulations and policies often relate to electricity pricing and technical interconnection of customer owned electricity generation. In the United States and in a number of other countries, these regulations and policies have been modified in the past and may be modified again in the future. These regulations and policies could deter end user purchases of PV products and investment in the research and development of PV technology. For example, without a mandated regulatory exception for PV systems, utility customers are often charged interconnection or standby fees for putting distributed power generation on the electric utility grid. These fees could increase the cost to our end users of using PV systems and make them less desirable, thereby harming our business, prospects, results of operations and financial condition. In addition, electricity generated by PV systems mostly competes with expensive peak hour electricity, rather than the less expensive average price of electricity. Modifications to the peak hour pricing policies of utilities, such as to a flat rate, would require PV systems to achieve lower prices in order to compete with the price of electricity from other sources.

15

We anticipate that our PV modules and their use in installations will be subject to oversight and regulation in accordance with national and local ordinances relating to building codes, safety, environmental protection, utility interconnection and metering and related matters. It is difficult to track the requirements of individual states and design equipment to comply with the varying standards. Any new government regulations or utility policies pertaining to PV modules may result in significant additional expenses to us, our business partners and their customers and, as a result, could cause a significant reduction in demand for our PV modules.

We may be subject to risks related to our information technology systems, including the risk that we may be the subject of a cyber-attack and the risk that we may be in non-compliance with applicable privacy laws.  Our operations depend, in part, on how well we and our vendors protect networks, equipment, information technology (IT) systems, and software against damage from a number of threats, including, but not limited to, cable cuts, damage to physical plants, natural disasters, intentional damage and destruction, fire, power loss, hacking, computer viruses, vandalism, theft, malware, ransomware and phishing attacks. Any of these and other events could result in IT system failures, delays, or increases in capital expenses. Our operations also depend on the timely maintenance, upgrade, and replacement of networks, equipment, and IT systems and software, as well as preemptive expenses to mitigate the risks of failures. The failure of IT systems or a component of IT systems could, depending on the nature of any such failure, adversely impact our reputation and results of operations.

We recently remediated material weaknesses in our internal control over financial reporting. If our remediation efforts were insufficient to address the material weaknesses, or if additional material weaknesses or significant deficiencies in our internal control over financial reporting are discovered or occur in the future, our consolidated financial statements may contain material misstatements, which could adversely affect our stock price and could negatively impact our results of operations.  At December 31, 2020 and March 31, 2021, we concluded that there were material weaknesses in our internal control over financial reporting. A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim consolidated financial statements will not be prevented or detected on a timely basis. We remediated our material weakness and reported our remediation at June 30, 2021. At December 31, 2021, we concluded that the design and operation of our disclosure controls and procedures were effective. See Item 9A in Part II of this Annual Report on Form 10-K for details.

While we believe that the substantial elimination of the complexities in the Company’s debt and securities accounting along with changes in internal controls over financial reporting during the period from April 1, 2021 to December 31, 2021, have materially improved the Company’s internal control over financial reporting, and have effectively remediated the Company’s prior material weaknesses, we cannot assure that these or other measures will fully remediate, or have fully remediated, the deficiencies or material weaknesses. We cannot assure you that we have identified all of our existing significant deficiencies and material weaknesses, or that we will not in the future have additional significant deficiencies or material weaknesses. If we are unable to remediate a material weakness, or otherwise maintain effective internal control over financial reporting, we may not be able to report our financial results accurately, prevent fraud, or file our periodic reports in a timely manner.

As long as our significant stockholders, BD 1 Investment Holding, LLC (“BD1”), Crowdex Investment, LLC (“Crowdex”) and TubeSolar, maintain their current holdings, the ability of our other stockholders to influence matters requiring stockholder approval will be limited.  As of March 14, 2022, BD1 beneficially owned 15,933,334 shares of our common stock, Crowdex beneficially owned 5,545,042 shares of our common stock, and TubeSolar beneficially owned 4,961,234 shares of our common stock. As of March 14, 2022, the Company had approximately 30,586,804 shares of common stock outstanding. Accordingly, BD1, Crowdex, and TubeSolar together would be able to cast approximately 86.4% of the votes entitled to vote at any meeting of stockholders of the Company (or written consent of stockholders in lieu of meeting). BD1, Crowdex, and TubeSolar, therefore, will, for the foreseeable future, have significant influence over our management and affairs, and will be able to control virtually all matters requiring stockholder approval, including the election of directors and significant corporate transactions such as mergers or sales of our Company or assets. On September 15, 2021, the Company entered into the JDA with TubeSolar. See “Item 1 Business” for additional detail.

The interests of our three largest stockholders may conflict with our interests or your interests now or in the future. Three of our stockholders, Crowdex, TubeSolar and BD1, collectively beneficially own approximately 86.4% of our Company’s common stock.

16

Crowdex is an investment holding company 100% directly and indirectly beneficially owned by Bernd Förtsch. One of our directors, David Peterson, is the manager of Crowdex and a cousin of Michael J. Gilbreth, the Company’s Chief Financial Officer.

TubeSolar is a developer of photovoltaic thin-film tubes to enable additional application opportunities in solar power generation compared to conventional solar modules. TubeSolar is a public company headquartered in Augsburg, Germany, whose shares are listed on XETRA (primary market Dusseldorf, Germany). Bernd Förtsch directly and indirectly owns a controlling interest in TubeSolar. On September 15, 2021, the Company entered into the JDA with TubeSolar. See “Item 1 Business” for additional detail.

BD1 is an investment holding company. BD1 is 100% owned by BD Vermögensverwaltung GmbH. BD Vermögensverwaltung GmbH is 100% owned by Solar Invest International SE. Johannes Kuhn and Ute Kuhn are the beneficial owners and members of the board of directors of Solar Invest International SE. BD Vermögensverwaltung GmbH and Solar Invest International SE together own approximately 18.9% of TubeSolar’s shares.

Various conflicts of interest between us and our controlling stockholders could arise. The ownership interest and voting power of our controlling stockholders could create or appear to create potential conflicts of interest when such controlling stockholders are faced with decisions relating to us. We may not be able to resolve any potential conflicts, and even if we do, the resolution may be less favorable to us than if we were dealing with an unaffiliated third party.

So long as Crowdex, TubeSolar and BD1 continue to beneficially own a significant amount of our outstanding equity securities, those stockholders may be able to strongly influence or effectively control our decisions.

Risks Relating to our Securities and an Investment in our Common Stock

The price of our common stock may continue to be volatile.  Our common stock is currently traded on the OTC Markets. The trading price of our common stock from time to time has fluctuated widely and may be subject to similar volatility in the future. For example, during most of the calendar year ended December 31, 2020, our common stock traded at or below $1.00 and in 2021, our common stock ranged from $10.00 to $485.00, all prices as adjusted for the reverse stock split. The trading price of our common stock in the future may be affected by a number of factors, including events described in these Risk Factors. In recent years, broad stock market indices, in general, and smaller capitalization and PV companies, in particular, have experienced substantial price fluctuations. In a volatile market, we may experience wide fluctuations in the market price of our common stock. These fluctuations may have a negative effect on the market price of our common stock regardless of our operating performance. In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been instituted. A securities class action suit against us could result in substantial costs, potential liabilities and the diversion of management’s attention and resources and could have a material adverse effect on our financial condition.

As a public company we are subject to complex legal and accounting requirements that require us to incur substantial expenses, and our financial controls and procedures may not be sufficient to ensure timely and reliable reporting of financial information, which, as a public company, could materially harm our stock price and listing on OTC Markets.  As a public company, we are subject to numerous legal and accounting requirements that do not apply to private companies. The cost of compliance with many of these requirements is substantial, not only in absolute terms but, more importantly, in relation to the overall scope of the operations of a small company. Failure to comply with these requirements can have numerous adverse consequences including, but not limited to, our inability to file required periodic reports on a timely basis, loss of market confidence, delisting of our securities and/or governmental or private actions against us. We cannot assure you we will be able to comply with all of these requirements or the cost of such compliance will not prove to be a substantial competitive disadvantage vis-à-vis our privately held and larger public competitors.

The Sarbanes-Oxley Act of 2002 (“Sarbanes-Oxley”) requires, among other things, that we maintain effective internal control over financial reporting and disclosure controls and procedures. In particular, we must perform system and process evaluation and testing of our internal control over financial reporting to allow management to report on the effectiveness of our internal control over financial reporting, as required by Section 404 of Sarbanes-Oxley. Our compliance with Section 404 of

17

Sarbanes-Oxley will require we incur substantial accounting expense and expend significant management efforts. The effectiveness of our controls and procedures may, in the future, be limited by a variety of factors, including:

If we are not able to comply with the requirements of Section 404 in a timely manner, or if we or our independent registered public accounting firm, identifies deficiencies in our internal control over financial reporting that are deemed to be material weaknesses, we may be subject to OTC Markets delisting, investigations by the SEC and civil or criminal sanctions.

Our ability to successfully implement our business plan and comply with Section 404 requires us to be able to prepare timely and accurate financial statements. We expect we will need to continue to improve existing, and implement new operational, financial and accounting systems, procedures and controls to manage our business effectively.

Any delay in the implementation of, or disruption in the transition to, new or enhanced systems, procedures or controls may cause our operations to suffer, and we may be unable to conclude that our internal control over financial reporting is effective as required under Section 404 of Sarbanes-Oxley. If we are unable to complete the required Section 404 assessment as to the adequacy of our internal control over financial reporting, if we fail to maintain or implement adequate controls, our ability to obtain additional financing could be impaired. In addition, investors could lose confidence in the reliability of our internal control over financial reporting and in the accuracy of our periodic reports filed under the Securities Exchange Act of 1934, as amended (“Exchange Act”). A lack of investor confidence in the reliability and accuracy of our public reporting could cause our stock price to decline.

Our stockholders may experience significant dilution as a result of new securities that we may issue in the future.   We may issue additional common stock or securities convertible into or exchangeable or exercisable for common stock, in connection with future capital raising transactions. The issuance of material amounts of common stock by us would cause our existing stockholders to experience significant dilution in their investment in our Company. Also, if we obtain additional financing involving the issuance of equity securities or securities convertible into equity securities, our existing stockholders’ investment would be further diluted. Such dilution could cause the market price of our common stock to decline, which could impair our ability to raise additional financing.

Sales of a significant number of shares of our common stock in the public markets or significant short sales of our stock, or the perception that such sales could occur, could depress the market price of our common stock and impair our ability to raise capital.  Sales of a substantial number of shares of our common stock or other equity-related securities in the public markets could depress the market price of our common stock. If there are significant short sales of our stock, the price decline that could result from this activity may cause the share price to decline more so, which, in turn, may cause long holders of the stock to sell their shares, thereby contributing to sales of stock in the market. Such sales also may impair our ability to raise capital through the sale of additional equity securities in the future at a time and price that our management deems acceptable, if at all. In addition, a large number of our outstanding shares are not registered under the Securities Act. If and when these shares are registered or become eligible for sale to the public market, the market price of our common stock could also decline.

Our common stock has previously been delisted from the Nasdaq Capital Market and the OTCQB Venture Market. Our inability to maintain our prior listings on Nasdaq and OTCQB may limit the liquidity of our stock, increase its volatility, and hinder our ability to raise capital.  On February 25, 2016, our common stock was delisted from the Nasdaq Capital Market and began trading on the OTCQB Venture Market. On May 20, 2017 our common stock was delisted from the OTCQB Venture Market and began trading on the OTC Markets.

Upon such delisting from Nasdaq, our common stock became subject to the regulations of the SEC relating to the market for penny stocks. A penny stock is any equity security not traded on a national securities exchange that has a market price of less than $5.00 per share. The regulations applicable to penny stocks may severely affect the market liquidity for our common stock and could limit the ability of shareholders to sell securities in the secondary market. Accordingly, investors in our common stock may find it more difficult to dispose of or obtain accurate quotations as to the market value of our common stock, and there can be no assurance that our common stock will be continue to be eligible for trading or quotation on the OTC Markets or any other alternative exchanges or markets.

18

The delisting of our common stock from the Nasdaq Capital Market and the OTCQB Venture Market may adversely affect our ability to raise additional financing through public or private sales of equity securities, may significantly affect the ability of investors to trade our securities, and may negatively affect the value and liquidity of our common stock. Such delisting from the Nasdaq Capital Market and the OTCQB Venture Market may also have other negative results, including the potential loss of confidence by employees, the loss of institutional investor interest and fewer business development opportunities.

Some provisions of our charter documents and Delaware law may have anti-takeover effects that could discourage an acquisition of us by others, even if an acquisition would be beneficial to our stockholders, and may prevent attempts by our stockholders to replace or remove our current management. Provisions in our Certificate of Incorporation and Bylaws, each as amended, as well as provisions of Delaware law, could make it more difficult for a third party to acquire us, or for a change in the composition of our Board of Directors (our “Board”) or management to occur, even if doing so would benefit our stockholders. These provisions include:

In addition, we are subject to Section 203 of the Delaware General Corporation Law, which generally prohibits a Delaware corporation from engaging in any of a broad range of business combinations with an interested stockholder for a period of three years following the date on which the stockholder became an interested stockholder, unless such transactions are approved by our Board. This provision could have the effect of delaying or preventing a change of control, whether or not it is desired by, or beneficial to, our stockholders.

Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

Our principal business office and manufacturing facility is located in a leased space at 12300 Grant Street, Thornton, Colorado 80241. We have approximately 30,000 square feet of fully equipped office space and 70,000 square feet of fully equipped manufacturing space. We consider our office space adequate for our current operations.

Item 3. Legal Proceedings

Details of the Company’s legal proceedings are included in Note 17 to the consolidated financial statements within Item 8 of this Annual Report on Form 10-K.

Item 4. Mine Safety Disclosures

Not applicable.

19

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

Our stock previously traded on the Nasdaq Capital Market. On February 23, 2016 the Company received notice from Nasdaq stating that Nasdaq had determined to delist the Company's common stock. On May 20, 2017 our common stock was delisted from the OTCQB Venture Market and began trading on the OTC Markets. Our trading symbol is “ASTI.”

Holders

As of December 31, 2021, the number of record holders of our common stock was 25. Because many of our shares of common stock are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of stockholders represented by these record holders.

Dividends

The holders of common stock are entitled to receive such dividends as may be declared by our Board of Directors. During the years ended December 31, 2021 and 2020, we did not pay any common stock dividends, and we do not expect to declare or pay any dividends in the foreseeable future. Payment of future dividends will be within the discretion of our Board of Directors and will depend on, among other factors, our retained earnings, capital requirements, and operating and financial condition.

Recent Sales of Unregistered Securities

During the year ended December 31, 2021, all sales of unregistered securities by the Company have been previously reported on a Form 8-K or Form 10-Q.

Issuer Purchases of Equity Securities

We did not repurchase any of our equity securities during the period covered by this Annual Report.

Item 6. Selected Financial Data

Smaller reporting companies are not required to provide the information required by this Item.

20

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion of our financial condition and results of operations should be read in conjunction with our audited financial statements and the notes to those financial statements appearing elsewhere in this Form 10-K. This discussion and analysis contain statements of a forward-looking nature relating to future events or our future financial performance. As a result of many factors, our actual results may differ materially from those anticipated in these forward-looking statements. These statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these forward-looking statements.

Overview

We are a company formed to commercialize flexible PV modules using our proprietary technology. For the year ended December 31, 2021 we generated $607,783 of revenue. Product sales accounted for 100% of total revenue. As of December 31, 2021, we had an accumulated deficit of approximately $427,782,788.

In January 2017, Ascent was awarded a contract to supply high-voltage SuperLight thin-film CIGS PV blankets. These 50W, fully laminated, flexible blankets were manufactured using a new process that was optimized for high performance in near-space conditions at elevated temperatures, and are custom designed for easy modular integration into series and parallel configurations to achieve the desired voltage and current required for such application.

In February 2017 Ascent announced the discontinuation of our EnerPlex consumer business by disposing of the EnerPlex brand, and related intellectual properties and trademarks, to our battery product supplier, Sun Pleasure Co. Limited (“SPCL”). This transaction was completed in an effort to better allocate our resources and to continue to focus on our core strength in the high-value specialty PV market. Following the transfer, Ascent no longer produces or sells Enerplex-branded consumer products. In November 2017, Ascent introduced the next generation of our USB-based portable power systems with the XD™ series. The first product introduced was the XD-12 which, like previous products, is a folding, lightweight, easily stowable, PV system with USB power regulation. Unique to this generation of PV portable power is more PV power (12 Watts) and a 2.0 Amp smart USB output to enable the XD-12 to charge most smartphones, tablets, and USB-enabled devices as fast as a wall outlet. The enhanced smart USB circuit works with the device to be charged so that the device can determine the maximum power it is able to receive from the XD-12 and ensures the best possible charging performance directly from the sun.

Also, in 2017, for a space customer, Ascent manufactured a new micro-module, approximately 12.8mm x 50mm (0.5in x 2.0in) in size that is ideal for both laboratory-scale environmental testing, and for subsequent integration into flight experiments.

In February 2018, the Company introduced the second product in our XD series. Delivering up to 48 Watts of solar power, the durable and compact Ascent XD-48 Solar Charger is the ideal solution for charging many portable electronics and off-grid power systems. The XD-48’s versatility allows it to charge both military and consumer electronics directly from the sun wherever needed. Like the XD-12, the XD-48 has a compact and portable design, and its rugged, weather-resistant construction withstands shocks, drops, damage and even minor punctures to power through the harshest conditions.

In March 2018, Ascent successfully shipped to a European based customer for a lighter-than-air, helium-filled airship project based on our newly developed ultra-light modules with substrate material than half of the thickness of our standard modules. In 2019, Ascent completed a repeat order from the same customer who had since established its airship development operation in the US. In 2020, we received a third and enlarged order from the same customer and completed the order in the second quarter of 2021. Most recently, in the 4^th quarter of 2021 we received a fourth order with a targeted ship date in the 2^nd quarter of 2022.

We continue to design and manufacture PV integrated portable power applications for commercial and military users. Due to the high durability enabled by the monolithic integration employed by our technology, the capability to customize modules into different form factors and the industry leading light weight and flexibility provided by our modules, we believe that the potential applications for our products are extensive.

21

Commercialization and Manufacturing Strategy

We manufacture our products by affixing a thin CIGS layer to a flexible, plastic substrate using a large format, roll-to-roll process that permits us to fabricate our flexible PV modules in an integrated sequential operation. We use proprietary monolithic integration techniques which enable us to form complete PV modules with little to no costly back end assembly of inter cell connections. Traditional PV manufacturers assemble PV modules by bonding or soldering discrete PV cells together. This manufacturing step typically increases manufacturing costs and at times proves detrimental to the overall yield and reliability of the finished product. By reducing or eliminating this added step using our proprietary monolithic integration techniques, we believe we can achieve cost savings in, and increase the reliability of, our PV modules. All tooling necessary for us to meet our near-term production requirements is installed in our Thornton, Colorado plant. In 2012, we further revised our strategy to focus on applications for emerging and high-value specialty PV markets, including off grid, aerospace, military and defense and consumer-oriented products.

We plan to continue the development of our current PV technology to increase module efficiency, improve our manufacturing tooling and process capabilities and reduce manufacturing costs. We also plan to continue to take advantage of research and development contracts to fund a portion of this development.

Significant Trends, Uncertainties and Challenges

We believe the significant trends, uncertainties and challenges that directly or indirectly affect our financial performance and results of operations include:

Basis of Presentation: The discussion and analysis of our financial condition and results of operations are based on our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States (“US GAAP” or “GAAP”). The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. We have identified the policies below as critical to our business operations and to the understanding of our financial results:

22

Significant Accounting Policies

Inventories: All inventories are stated at the lower of cost or net realizable value, with cost determined using the weighted average method. Inventory balances are frequently evaluated to ensure they do not exceed net realizable value. The computation for net realizable value takes into account many factors, including expected demand, product life cycle and development plans, module efficiency, quality issues, obsolescence and others. Management's judgment is required to determine reserves for obsolete or excess inventory. If actual demand and market conditions are less favorable than those estimated by management, additional inventory write downs may be required.

Impairment of Long-lived assets: We analyze our long-lived assets (property, plant and equipment) and definitive-lived intangible assets (patents) for impairment, both individually and as a group, whenever events or changes in circumstances indicate the carrying amount of the assets may not be recoverable. Events that might cause impairment would include significant current period operating or cash flow losses associated with the use of a long-lived asset or group of assets combined with a history of such losses, significant changes in the manner of use of assets and significant negative industry or economic trends. An undiscounted cash flow analysis is calculated to determine if an impairment exists. If an impairment is determined to exist, any related loss is calculated using the difference between the fair value and the carrying value of the assets.  

Convertible Preferred Stock: The Company evaluates its preferred stock instruments under FASB ASC 480, "Distinguishing Liabilities from Equity" to determine the classification, and thereby the accounting treatment, of the instruments. Please refer to Notes 13 and 14 for further discussion on the classification of each instrument.

Derivatives: The Company evaluates its financial instruments under FASB ASC 815, "Derivatives and Hedging" to determine whether the instruments contain an embedded derivative. When an embedded derivative is present, the instrument is evaluated for a fair value adjustment upon issuance and at the end of every period. Any adjustments to fair value are treated as gains and losses in fair values of derivatives and are recorded on the Statement of Operations. Please refer to Notes 10 and 11 for further discussion on the embedded derivatives of each instrument.

Paycheck Protection Program Loan: The Company has elected to account for the forgivable loan received under the Paycheck Protection Program (“PPP”) provisions of the Coronavirus Aid, Relief, and Economic Security (“CARES”) Act as a debt instrument and to accrue interest on the outstanding loan balance. Additional interest at a market rate (due to the stated interest rate of the PPP loan being below market) is not imputed, as the transactions where interest rates prescribed by governmental agencies are excluded from the scope of accounting guidance on imputing interest. The proceeds from the loan will remain recorded as a liability until either (1) the loan is, in part of wholly, forgiven and the Company has been legally released or (2) the Company repays the loan to the lender. On September 4, 2021, the Company received notification from Vectra that the Small Business Administration has forgiven the PPP loan and the liability was recognized as other income.   

Revenue Recognition:

Product revenue. We recognize revenue for the sale of PV modules and other equipment sales at a point in time following the transfer of control of such products to the customer, which typically occurs upon shipment or delivery depending on the terms of the underlying contracts. For module and other equipment sales contracts that contain multiple performance obligations, we allocate the transaction price to each performance obligation identified in the contract based on relative standalone selling prices, or estimates of such prices, and recognize the related revenue as control of each individual product is transferred to the customer.

Milestone revenue.  Each milestone arrangement is a separate performance obligation. The transaction price is estimated using the most likely amount method and revenue is recognized as the performance obligation is satisfied through achieving manufacturing or cost targets and engineering targets.  

Government contract revenue. Revenue from government research and development contracts is generated under terms that are cost plus fee or firm fixed price. We generally recognize this revenue over time using cost-based input methods, which recognize revenue and gross profit as work is performed based on the relationship between actual costs incurred compared to the total estimated costs of the contract. In applying cost-based input methods of revenue recognition, we use the actual costs incurred relative to the total estimated costs to determine our progress towards contract completion and to calculate the corresponding amount of revenue to recognize.

23

Cost based input methods of revenue recognition are considered a faithful depiction of our efforts to satisfy long-term government research and development contracts and therefore reflect the performance obligations under such contracts. Costs incurred that do not contribute to satisfying our performance obligations are excluded from our input methods of revenue recognition as the amounts are not reflective of our transferring control under the contract. Costs incurred towards contract completion may include direct costs plus allowable indirect costs and an allocable portion of the fixed fee. If actual and estimated costs to complete a contract indicate a loss, provision is made currently for the loss anticipated on the contract.

Research, Development and Manufacturing Operations Costs: Research, development and manufacturing operations expenses include: 1) technology development costs, which include expenses incurred in researching new technology, improving existing technology and performing federal government research and development contracts, 2) product development costs, which include expenses incurred in developing new products and lowering product design costs, and 3) pre-production and production costs, which include engineering efforts to improve production processes, material yields and equipment utilization, and manufacturing efforts to produce saleable product. Research, development and manufacturing operations costs are expensed as incurred, with the exception of costs related to inventoried raw materials, work-in-process and finished goods, which are expensed as Cost of revenue as products are sold. 

Recently Issued Accounting Standards

In August 2020, the FASB issued ASU No. 2020-06, Debt - Debt with Conversion and Other Options (Subtopic 470-20) and Derivatives and Hedging Contracts in Entity s Own Equity (Subtopic 815-40): Accounting for Convertible Instruments and Contracts in an Entity s Own Equity. ASU 2020-06 will simplify the accounting for convertible instruments by reducing the number of accounting models for convertible debt instruments and convertible preferred stock. Limiting the accounting models results in fewer embedded conversion features being separately recognized from the host contract as compared with current GAAP. Convertible instruments that continue to be subject to separation models are (1) those with embedded conversion features that are not clearly and closely related to the host contract, that meet the definition of a derivative, and that do not qualify for a scope exception from derivative accounting and (2) convertible debt instruments issued with substantial premiums for which the premiums are recorded as paid-in capital. ASU 2020-06 also amends the guidance for the derivatives scope exception for contracts in an entity’s own equity to reduce form-over-substance-based accounting conclusions. ASU 2020-06 will be effective for public companies that are smaller reporting companies for fiscal years beginning after December 15, 2023, including interim periods within those fiscal years. Early adoption is permitted, but no earlier than fiscal years beginning after December 15, 2020, including interim periods within those fiscal years. Management has not yet evaluated the impact that the adoption of ASU 2020-06 will have on the Company’s consolidated financial statement presentation or disclosures.

Other new pronouncements issued but not effective as of December 31, 2021 are not expected to have a material impact on the Company’s consolidated financial statements.

24

Results of Operations

Comparison of the Years Ended December 31, 2021 and 2020

Revenues. Our revenues increased by $541,170, or 812%, for the year ended December 31, 2021 when compared to the same period in 2020. The increase in sales is due primarily increased operations in the current year. During 2020, the Company was in a dormant status for the most part of the year as the focus in 2020 was to recapitalize and restructure the Company’s balance sheet. The intensification of the COVID-19 pandemic since March 2020 also significantly impacted our restructuring effort, thereby delaying our ability to restart our operations in a timely manner.

Cost of revenues. Cost of revenues is comprised primarily of repair and maintenance, direct labor and overhead expenses. Our cost of revenues increased by $1,727,826, or 990%, for the year ended December 31, 2021 when compared to the same period in 2020. The increase in cost of revenues is mainly due to the increase in repair and maintenance, materials, and labor costs as a result of increased production and restarting equipment for the year ended December 31, 2021 compared to 2020. Management believes our factory is currently significantly under-utilized, and a substantial increase in revenue would result in marginal increases to direct labor and overhead included in the cost of revenues. As such, management’s focus going forward is to improve gross margin through increased sales and improved utilization of our factory.

Research, development and manufacturing operations. Research, development and manufacturing operations costs include costs incurred for product development, pre-production and production activities in our manufacturing facility. Research, development and manufacturing operations costs also include costs related to technology development and governmental contracts. Research, development and manufacturing operations costs increased by $2,975,126 or 255%, for the year ended December 31, 2021 when compared to the same period in 2020. The increase in cost is due primarily to increased operations in the current year as compared to the Company’s dormant status in the prior year.

Selling, general and administrative. Selling, general and administrative expenses increased by $2,268,262, or 220%, for the year ended December 31, 2021 when compared to the same period in 2020. The increase in costs is due primarily to an increased level of operations in the current period as compared to the Company’s dormant status in 2020.  

Other Income. Other income decreased by $1,281,747 or 31%, for the year ended December 31, 2021 when compared to the same period in 2020. In 2020, the Company recognized approximately $3 million gain on the sale of our facility with no similar transaction in the current year. This is partially offset by the decrease in interest expense in the current year as the Company restructured its debt in late 2020.  

25

Net Income/(Loss). Our Net Loss was $6,000,003 for the year ended December 31, 2021, compared to Net Income of $1,617,444 for the year ended December 31, 2020, a reduction of $7,617,447. The reduction is due to the reasons described above.

Liquidity and Capital Resources

The Company has continued limited PV production at its manufacturing facility. The Company does not expect that sales revenue and cash flows will be sufficient to support operations and cash requirements until it has fully implemented its product strategy. During the year ended December 31, 2021 the Company used $9,404,443 in cash for operations.

Additional projected product revenues are not anticipated to result in a positive cash flow position for the year 2022 overall and, as of December 31, 2021, the Company has working capital of $3,799,806; however additional financing will be required for us to reach a level of sufficient sales to achieve profitability.

The Company continues to accelerate sales and marketing efforts related to its military solar products and specialty PV application strategies through expansion of its sales and distribution channels. The Company continues activities to secure additional financing through strategic or financial investors, but there is no assurance the Company will be able to raise additional capital on acceptable terms or at all. If the Company's revenues do not increase rapidly, and/or additional financing is not obtained, the Company will be required to significantly curtail operations to reduce costs and/or sell assets. Such actions would likely have an adverse impact on the Company's future operations.

As a result of the Company’s recurring losses from operations, and the need for additional financing to fund its operating and capital requirements, there is uncertainty regarding the Company’s ability to maintain liquidity sufficient to operate its business effectively, which raises substantial doubt as to the Company’s ability to continue as a going concern. The Company has scaled down its operations, due to cash flow issues, and does not expect to ramp up until significant financing is obtained.

Management cannot provide any assurances that the Company will be successful in accomplishing any of its plans. These consolidated financial statements do not include any adjustments that might be necessary should the Company be unable to continue as a going concern.

Statements of Cash Flows Comparison of the Years Ended December 31, 2021 and 2020

For the year ended December 31, 2021, our cash used in operations was $9,404,443 compared to $2,884,919 for the year ended December 31, 2020, an increase of $6,519,524. The increase is primarily the result of scaling up operations during 2021 as compared to the Company’s dormant status for most of 2020. For the year ended December 31, 2021, cash used in investing activities was $301,522 compared to cash provided by investing activities of $254,444 for the year ended December 31, 2020. This change was primarily the result of a decrease in proceeds from the sale of assets. During the year ended December 31, 2021, negative operating cash flows of $9,404,443 were primarily funded through $15,500,000 in proceeds from issuances of preferred and common stock.

Off Balance Sheet Transactions

As of December 31, 2021, we did not have any off-balance sheet arrangements as defined in Item 303(a)(4)(ii) of Regulation S-K.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Foreign Currency Exchange Risk

We hold no significant funds and have no future obligations denominated in foreign currencies as of December 31, 2021.

Although our reporting currency is the U.S. Dollar, we may conduct business and incur costs in the local currencies of other countries in which we may operate, make sales and buy materials. As a result, we are subject to currency translation risk. Further, changes in exchange rates between foreign currencies and the U.S. Dollar could affect our future net sales and cost of sales and could result in exchange losses.

26

Interest Rate Risk

Our exposure to market risks for changes in interest rates relates primarily to our cash equivalents and investment portfolio. As of December 31, 2021, our cash equivalents consisted only of operating accounts held with financial institutions. From time to time, we hold restricted funds, money market funds, investments in U.S. government securities and high-quality corporate securities. The primary objective of our investment activities is to preserve principal and provide liquidity on demand, while at the same time maximizing the income we receive from our investments without significantly increasing risk. The direct risk to us associated with fluctuating interest rates is limited to our investment portfolio, and we do not believe a change in interest rates will have a significant impact on our financial position, results of operations, or cash flows.

Item 8. Financial Statements and Supplementary Data

The Financial Statements and Supplementary Data required by this item are included in Part IV, Item 15(a)(1) and are presented beginning on Page F-1.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

Item 9A.  Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures designed to ensure that information required to be disclosed in our reports filed or submitted under the Securities Exchange Act of 1934, as amended (the “Exchange Act”) is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms. Our disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is accumulated and communicated to management as appropriate to allow timely decisions regarding required disclosures. Our management conducted an evaluation required by Rules 13a-15 and 15d-15 under the Exchange Act of the effectiveness of our disclosure controls and procedures as defined in Rules 13a-15 and 15d-15 under the Exchange Act as of December 31, 2021. Based on this evaluation, our management concluded the design and operation of our disclosure controls and procedures were effective as of December 31, 2021.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Our system of internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America and includes those policies and procedures that:

Under the supervision of the Audit Committee of the Board of Directors and with the participation of our management, including our Chief Executive Officer, we engaged an independent third party firm and conducted an evaluation of the effectiveness of our internal control over financial reporting using the criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on this evaluation, our management concluded our internal control over financial reporting were effective as of December 31, 2021. Our management reviewed the results of its assessment with the Audit Committee.

27

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis.

Material Weakness Identified in 2020

As disclosed in Item 9A, “Controls and Procedures,” of the Company’s Annual Report on Form 10-K for the year ended December 31, 2020, management concluded that a material weakness existed in its internal control over financial reporting as it related to the lack of accounting resourcing with technical expertise to ensure that all Company transactions were accounted for in accordance with US GAAP. Specifically, the Company’s controls to ensure that appropriate accounting for the Company’s inventory and cost of revenue and the Company’s accounting for complex debt and equity securities transactions were not designed at a sufficient level of precision to mitigate the risk of material misstatement.

Remediation of Material Weaknesses in Internal Control over Financial Reporting

The Company’s financial challenges faced in 2020 subsided as cash flows improved during the year ended December 31, 2020 and began to bring the Company into operating status. The Company executed the following steps to remediate the aforementioned material weakness in its internal controls over financial reporting:  

The substantial elimination of the complexities in the Company’s debt and securities accounting along with the above changes in internal controls over financial reporting during the year ended December 31, 2021, have materially improved the Company’s internal control over financial reporting, and have effectively remediated the Company’s prior material weaknesses as previously disclosed above.

Changes in Internal Control Over Financial Reporting

Except for the identification and mitigation of the material weaknesses noted above, there were no other changes in internal control over financial reporting during the year ended December 31, 2021 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Item 9B. Other Information

None.

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections

Not applicable.

28

PART III

Item 10. Directors, Executive Officers and Corporate Governance

EXECUTIVE OFFICERS AND DIRECTORS

Our executive officers, continuing directors and director nominees, their ages and positions with us as of March 14, 2022, are as follows:

Victor Lee (Lee Kong Hian) has been the President and Chief Executive Officer of Ascent Solar Technologies Inc. since February 1, 2012 and a member of our Board since November 2011. Mr. Lee joined HF Foods Group Inc. (NASDAQ:HFFG) as Vice President, Chief Corporate Finance and Strategy Officer in December 2019 and was promoted to Executive Vice President and Chief Financial Officer in May 2020. He brings more than 25 years of experience in strategic planning, sales & marketing, corporate finance, real estate finance and investment management, and corporate advisory services at leading worldwide financial institutions. Mr. Lee began his career at Citibank N.A., in 1993, handling small-and medium-sized corporate finance and progressed to a vice president position in the International Personal Banking Division. In 1999 he moved to Deutsche Bank AG as Vice President and in 2004 was promoted to managing director Singapore Market Head in the Private Wealth Management Division, where he was responsible for management of approximately $1 Billion in assets. From 2007 until 2009, he was with Morgan Stanley Private Wealth Management, most recently as executive director and head of Singapore/Malaysia markets. Mr. Lee holds a Bachelor's degree in Accounting from the University of Wisconsin and a Master's in Wealth Management from the Singapore Management University. We believe Mr. Lee is well-qualified to serve as a director due to his business experience and his comprehensive knowledge of the Company.

Michael J. Gilbreth has been Chief Financial Officer of Ascent Solar Technologies Inc. since October 2020. Mr. Gilbreth is a financial executive with more than 15 years of experience in accounting and business management, consumer packaged goods, e-commerce, and financial consulting. In April 2020, Mr. Gilbreth formed a financial consulting company, PVMG Advisors, Inc., which provides financial and business consulting services. While at PVMG, Mr. Gilbreth provided consulting services to Crowdex Investment, LLC in connection with the Company’s recent restructuring and recapitalization process. Previously, from 2015 to January 2020, Mr. Gilbreth was Vice President of Finance at Candy Club Holding Limited (ASX: CLB) headquartered in Los Angeles, California. Candy Club is a leading specialty market confectionery company which operates in the business-to-business (B2B) and business-to-customer (B2C) segments in the United States. In this lead finance role at Candy Club, Mr. Gilbreth supported the company’s capital raising activities, including a successful initial public offering on the Australian Stock Exchange (ASX) in February 2019. From 2013 to 2015, Mr. Gilbreth operated Gilbreth Consulting, which provides financial and operational management consulting services, and strategic and operational planning services. From 2010 to 2013, Mr. Gilbreth was VP/Finance at MediaTrust, a performance marketing company based in southern California. From 2005 to 2010, Mr. Gilbreth was a business manager at Duban Sattler and Associates LLP, a boutique tax accounting and business management firm based in southern California which represents high net worth individuals. Mr. Gilbreth holds a Bachelor’s degree in Business Administration from California State University, Chico.  Mr. Gilbreth and David Peterson are cousins.

Amit Kumar, Ph.D. has served on our Board since June 2007 and as Chairman since January 2011. Dr. Kumar is currently Chairman, President and CEO of Anixa Biosciences (NASDAQ:ANIX), a publicly held biotechnology company. From December 2010 to June 2015, Dr. Kumar was President and CEO of Geo Fossil Fuels, a privately held energy company. From September 2001 until June 30, 2010, Dr. Kumar was President and CEO of CombiMatrix Corporation (NASDAQ: CBMX). Previously, Dr. Kumar was Vice President of Life Sciences of Acacia Research Corp (NASDAQ: ACTG). From January 1999 to February 2000, Dr. Kumar was the founding President and Chief Executive Officer of Signature BioSciences, Inc., a life science company developing technology for advanced research in genomics, proteomics and drug discovery. From January 1998 to December 1999, Dr. Kumar was an Entrepreneur in Residence with Oak Investment Partners, a venture capital firm. From October 1996 to January 1998, Dr. Kumar was a Senior Manager at IDEXX Laboratories, Inc., a biotechnology company.

29

From October 1993 to September 1996, Dr. Kumar was Head of Research & Development for Idetek Corporation, which was later acquired by IDEXX Laboratories, Inc. Dr. Kumar received his B.S. degree in chemistry from Occidental College. After joint studies at Stanford University and the California Institute of Technology, he received his Ph.D. in Chemistry from Caltech in 1991. He also completed a post-doctoral fellowship at Harvard University in 1993. Dr. Kumar has authored and co-authored over 40 peer-reviewed publications and holds a dozen patents. Dr. Kumar brings significant leadership experience as well as experience in photovoltaic research including work on energy conversion using cells made from silicon (single crystal, polycrystalline, and amorphous), gallium arsenide, indium phosphide, metal oxides and other materials. Dr. Kumar is a member of the board of directors of Actym Therapeutics, a private biotechnology company. We believe Mr. Kumar is well-qualified to serve as a director due to his experience as a director and executive of several public and private companies.

Kim J. Huntley has served on our Board since June 2010. Mr. Huntley served in the Defense Logistics Agency (DLA) of the U.S. Department of Defense (DOD) for more than 32 years in positions of increasing responsibility. Most recently, from July 2008 until his retirement in January 2010, Mr. Huntley served as Director of the Defense Energy Support Center (DESC) in Fort Belvoir, Virginia. The DESC operates as part of the DLA and is responsible for providing energy solutions to the DOD and federal civilian agencies. As Director of the DESC, Mr. Huntley was the principal executive officer in charge of approximately 1,100 employees worldwide and over $25 billion in annual appropriations involving energy infrastructure and products. From March 2006 and immediately prior to becoming Director of the DESC, Mr. Huntley served in leadership roles involving supply chain management, including Deputy Commander for the Defense Supply Center in Richmond, Virginia and Columbus, Ohio, and as Executive Director of Customer Support and Readiness. From December 2003 to March 2006, Mr. Huntley served as Chief of the Customer Support Office in Fort Belvoir, Virginia. Mr. Huntley chaired the Inter Agency Working Group for Alternative Fuels and Renewable Energy from January 2009 to January 2010. The Group included senior energy representatives from DOD, DOE, EPA, and other major Federal Agencies. Mr. Huntley holds a B.A. degree in Economics from Golden Gate University and attended post-graduate courses in economics at California State University, Hayward. Mr. Huntley brings extensive supply chain, budget and defense industry experience to our Board. We believe Mr. Huntley is well-qualified to serve as a director due to his extensive experience in the public sector.

David Peterson has served on our Board since December 2020. Mr. Peterson has over 25 years of business management experience, including 8 years as a private equity investor, 5 years as a manager at an engineering consulting firm, and over 20 years of board experience. From April 2015 to present, Mr. Peterson has worked for EPD Consultants, Inc., a privately held engineering firm headquartered in Carson, California, where he serves as Senior Project Manager. From 2010 to 2015, Mr. Peterson was President and Co-Founder of Great Circle Industries, Inc., a water recycling company in southern California.  His past experience includes being a board member at AIR-serv, LLC, a tire inflation vending machine manufacturer, where Mr. Peterson managed the acquisition process, including obtaining expansion of the company's credit facility, as that company completed 10 acquisitions and grew from $10 million of EBITDA to $20 million of EBITDA in the year prior to its sale for $151 million to WindPoint Partners.  Mr. Peterson has an MBA degree from the Marshall School of Business at the University of Southern California, and a B.A. from the University of California, Santa Cruz.  Mr. Peterson is currently the Manager of Crowdex Investment, LLC, a significant equity investor in the Company.  Mr. Peterson and Michael J. Gilbreth are cousins. We believe Mr. Peterson is well-qualified to serve as a director due to his extensive management and board experience.

Will A. Clarke has served on our Board since December 2020. Since 2020, Mr. Clarke has been the Founder and President of Clarke Growth and Sustainment Strategies, an advisory firm specializing in guiding startup and early stage companies’ business expansion. From 2018 to 2020, Mr. Clarke was Head of Global Supply Chain Management and Technical Procurement for Atlas Airlines Worldwide Holdings, Inc. (NASDAQ: AAWW), a leading global provider of outsourced aircraft and aviation operating services headquartered in Purchase, NY. From 2015 to 2017, Mr. Clarke was Director of Procurement at Best Buy Co., Inc. (NYSE: BBY), a provider of technology products, services and solutions to its customers through over 1,400 retail stores, and also through its websites and mobile applications. Best Buy is headquartered in Richfield, MN and has operations in the United States, Canada and Mexico.  Prior to launching his second career in 2015, Mr. Clarke served 25 years as an Officer in the U.S. Navy, where he completed 10 deployments in support of war and peacetime operations on two aircraft carriers, one submarine, one warship and one on land. Mr. Clarke served in a number of senior finance, supply chain, procurement and logistics assignments across East Africa, Asia/Pacific, and the United States while serving in the U.S. Navy, where he attained the rank of Captain (O6). Mr. Clarke earned a B.S. in Mathematics from the U.S. Naval Academy, an M.S. in Finance and Contracts Management from the Naval Postgraduate School and has completed the Executive Development Program at Wharton Business School and the Corporate Governance Program at Columbia Business School. We believe Mr. Clarke is well-qualified to serve as a director due to his knowledge and business experience.

30

Section 16(a) Beneficial Ownership Reporting Compliance

Section 16(a) of the Exchange Act requires our directors, executive officers, and persons holding more than 10% of our common stock to report their initial ownership of the common stock and other equity securities and any changes in that ownership in reports that must be filed with the SEC. The SEC has designated specific deadlines for these reports, and we must identify in our Annual Report on Form 10-K those persons who did not file these reports when due.

Based solely on a review of reports furnished to us, or written representations from reporting persons, we believe all directors, executive officers, and 10% owners timely filed all reports regarding transactions in our securities required to be filed in 2020 or 2021 by Section 16(a) under the Exchange Act, except that (i) Mr. Gilbreth and Crowdex each filed a late Form 3 in 2020, (ii) TubeSolar filed a late Form 3 in 2021, and (iii) BD1 and TubeSolar each filed one late Form 4 in 2021.

31

CORPORATE GOVERNANCE

Overview

Our Bylaws provide that the size of our Board of Directors is to be determined from time to time by resolution of the Board of Directors, but shall consist of at least two and no more than nine members. Our Board of Directors currently consists of five members. The Board has determined that the following directors are “independent” as required by the listing standards of the OTC Markets and by our corporate governance guidelines: Dr. Kumar, Mr. Huntley and Mr. Clarke.

Our Certificate of Incorporation provides that the Board of Directors will be divided into three classes. Our Class 1 director is Dr. Amit Kumar. Our Class 2 directors are Kim J. Huntley and Will A. Clarke. Our Class 3 directors are David Peterson and Victor Lee.

Board Leadership Structure and Role in Risk Oversight

We currently separate the roles of Chairman of the Board and Chief Executive Officer. We believe that Dr. Kumar possesses the strategic, technical and industry knowledge and expertise to serve as our Chairman. As President and Chief Executive Officer, Mr. Lee is responsible for day-to-day oversight of our operations and personnel. Notwithstanding the foregoing, our Board does not have a formal policy regarding separation of the Chairman and Chief Executive Officer roles, and the Board may in the future decide to implement such a policy if it deems it in the best interests of us and our stockholders. The Board does not have a lead independent director.

Risk is inherent with every business, and how well a business manages risk can ultimately determine its success. We face a number of risks, including credit risk, interest rate risk, liquidity risk, operational risk, strategic risk and reputation risk. Management is responsible for the day-to-day management of risks we face, while the Board, as a whole and through its committees, has responsibility for the oversight of risk management. In its risk oversight role, the Board of Directors has the responsibility to satisfy itself that the risk management processes designed and implemented by management are adequate and functioning as designed. To do this, the Chairman of the Board meets regularly with management to discuss strategy and the risks we face. In addition, the Audit Committee regularly monitors our enterprise risk, including financial risks, through reports from management. Senior management attends the Board meetings and is available to address any questions or concerns raised by the Board on risk management and any other matters. The Chairman of the Board and independent members of the Board work together to provide strong, independent oversight of our management and affairs through the Board’s standing committees and, when necessary, executive sessions of the independent directors.

Committees of the Board of Directors

Our Board has three standing committees: an Audit Committee, a Compensation Committee, and a Nominating and Governance Committee. Each committee operates pursuant to a charter. The charters of the Audit Committee, the Compensation Committee, and the Nominating and Governance Committee can be found on our website www.ascentsolar.com.

Audit Committee. Our Audit Committee oversees our accounting and financial reporting processes, internal systems of accounting and financial controls, relationships with independent auditors, and audits of financial statements. Specific responsibilities include the following:

32

Our Audit Committee is comprised of Mr. Huntley, Dr. Kumar and Mr. Clarke. Mr. Huntley serves as Chairman of the Audit Committee. The Board has determined that all members of the Audit Committee are independent under the rules of the OTC Markets, and that Mr. Huntley qualifies as an “audit committee financial expert,” as defined by the rules of the SEC.

Compensation Committee. Our Compensation Committee assists our Board in determining the development plans and compensation of our officers, directors and employees. Specific responsibilities include the following:

The Compensation Committee reviews all components of compensation including base salary, bonus, equity compensation, benefits and other perquisites. In addition to reviewing competitive market values, the Compensation Committee also examines the total compensation mix, pay-for-performance relationship and how all elements, in the aggregate, comprise the executives’ total compensation package. The CEO makes recommendations to the Compensation Committee from time to time regarding the appropriate mix and level of compensation for other officers. Those recommendations consider the objectives of our compensation philosophy and the range of compensation programs authorized by the Compensation Committee. The Compensation Committee may determine director compensation by reviewing peer group data. Although the Compensation Committee has the authority to retain outside third parties, it does not currently utilize any outside consultants. The Compensation Committee may delegate certain of its responsibilities, as it deems appropriate, to other committees or officers.

Our Compensation Committee is comprised of Mr. Clarke, Mr. Huntley and Dr. Kumar. Mr. Clarke serves as Chairman of the Compensation Committee.

Our Board has determined that all members of the Compensation Committee are independent under the rules of the Nasdaq Capital Market and OTC Markets.

Nominating and Governance Committee. Our Nominating and Governance Committee assists our Board by identifying and recommending individuals qualified to become members of our Board, reviewing correspondence from our stockholders, and establishing, evaluating and overseeing our corporate governance guidelines. Specific responsibilities include the following:

Our Nominating and Governance Committee is comprised of Dr. Kumar, Mr. Huntley, and Mr. Clarke. Dr. Kumar serves as Chairman of our Nominating and Governance Committee. Our Board has determined that all members of the Nominating and Governance Committee are independent under the rules of Nasdaq Capital Market and OTC Markets.

When considering potential director candidates for nomination or election, the following characteristics are considered in accordance with our Nominating and Governance Committee Charter:

33

In addition, in order to maintain an effective mix of skills and backgrounds among the members of our Board, the following characteristics also may be considered when filling vacancies or identifying candidates:

The Nominating and Governance Committee will consider candidates recommended by stockholders who follow the nomination procedures in our bylaws. The Nominating and Governance Committee does not have a formal policy with respect to diversity; however, as noted above, the Board and the Nominating and Governance Committee believe that it is essential that Board members represent diverse viewpoints.

Number of Meetings

The Board held a total of six meetings in 2021. Our Audit Committee held ten meetings, our Compensation Committee held five meetings, and our Nominating and Governance Committee held four meetings in 2021. Each director attended at least 75% of the aggregate of the total number of meetings of the Board and the Board committees on which he served.

Board Member Attendance at Annual Stockholder Meetings

Although we do not have a formal policy regarding director attendance at annual stockholder meetings, directors are encouraged to attend these annual meetings absent extenuating circumstances. We did not hold our annual meeting during 2021 or 2020.

Stockholder Nominations

In accordance with our Bylaws, a stockholder wishing to nominate a director for election at an annual or special meeting of stockholders must timely submit a written proposal of nomination to us at our executive offices. To be timely, a written proposal of nomination for an annual meeting of stockholders must be received at least 90 calendar days but no more than 120 calendar days before the first anniversary of the date on which we held our annual meeting of stockholders in the immediately preceding year; provided, however, that in the event that the date of the annual meeting is advanced or delayed more than 30

34

calendar days from the anniversary of the annual meeting of stockholders in the immediately preceding year, the written proposal must be received: (i) at least 90 calendar days but no more than 120 calendar days prior to the date of the annual meeting; or (ii) no more than 10 days after the date we first publicly announce the date of the annual meeting. A written proposal of nomination for a special meeting of stockholders must be received no earlier than 120 calendar days prior to the date of the special meeting nor any later than the later of: (i) 90 calendar days prior to the date of the special meeting; and (ii) 10 days after the date we first publicly announce the date of the special meeting.

Each written proposal for a nominee must contain: (i) the name, age, business address and telephone number, and residence address and telephone number of the nominee; (ii) the current principal occupation or employment of each nominee, and the principal occupation or employment of each nominee for the prior ten (10) years; (iii) a complete list of companies, whether publicly traded or privately held, on which the nominee serves (or, during any of the prior ten (10) years, has served) as a member of the board of directors; (iv) the number of shares of our common stock that are owned of record and beneficially by each nominee; (v) a statement whether the nominee, if elected, intends to tender, promptly following such person’s failure to receive the required vote for election or reelection at the next meeting at which the nominee would face election or reelection, an irrevocable resignation effective upon acceptance of such resignation by the Board; (vi) a completed and signed questionnaire, representation and agreement relating to voting agreements or commitments to which the nominee is a party; (vii) other information concerning the nominee that would be required in a proxy statement soliciting the nominee’s election; and (viii) information about, and representations from, the stockholder making the nomination.

A stockholder interested in submitting a nominee for election to the Board of Directors should refer to our Bylaws for additional requirements. Upon receipt of a written proposal of nomination meeting these requirements, the Nominating and Governance Committee of the Board will evaluate the nominee in accordance with its charter and the characteristics listed above.

Director Compensation

In March and June 2021, our board of directors approved the following annual independent director compensation program:

Each annual cash retainer is paid quarterly in arrears. There are currently no equity grants for service on the board of directors. We do not provide any perquisites to directors but will reimburse all directors for expenses incurred in physically attending meetings or performing their duties as directors.

The following Director Compensation Table summarizes the compensation of each of our non-employee directors for services rendered to us during the year ended December 31, 2021:

2021 Director Compensation Table

35

In addition to the fees listed above, we reimburse the directors for travel expenses submitted to us related to their attendance at meetings of the Board or its committees. The directors did not receive any other compensation or personal benefits.

Code of Ethics

We have adopted a code of ethics that applies to our principal executive officer, principal financial officer, principal accounting officer and other senior finance and accounting staff. The code is designed to, among other things, deter wrongdoing and to promote the honest and ethical conduct of our officers and employees. The text of our code of ethics can be found on our Internet website at www.ascentsolar.com. If we effect an amendment to, or waiver from, a provision of our code of ethics, we intend to satisfy our disclosure requirements by posting a description of such amendment or waiver on that Internet website or via a current report on Form 8-K.

Communication with the Board of Directors

Stockholders may communicate with the Board by sending correspondence to our Chairman, c/o the Corporate Secretary, at our corporate address on the cover of this Form 10-K. It is our practice to forward all such correspondence to our Chairman, who is responsible for determining whether to relay the correspondence to the other members of the Board.

Item 11. Executive Compensation

We have opted to comply with the executive compensation disclosure rules applicable to “smaller reporting companies,” as such term is defined in the rules promulgated under the Securities Act.

This section provides an overview of the compensation awarded to, earned by, or paid to each individual who served as our principal executive officer during 2021, and up to two of our next most highly compensated executive officers in respect of their service to our Company for 2021. Our named executive officers, or the Named Executive Officers, for the year ended December 31, 2021, are:

The following Summary Compensation Table sets forth certain information regarding the compensation of our Named Executive Officers for services rendered in all capacities to us during the years ended December 31, 2021 and 2020.

36

Summary Compensation Table

Executive Employment Agreements

On April 4, 2014, we entered into an employment agreement with Mr. Lee. The employment agreement provides that Mr. Lee will receive an annual base salary of $300,000, subject to annual adjustments as determined by our board. Mr. Lee will also be eligible for an annual bonus of up to 100% of his base salary as determined at the sole discretion of our board or compensation committee. Under this agreement, if the Company terminates Mr. Lee without cause, then subject to his execution of a release of claims, (i) Mr. Lee is entitled to receive twelve months of base salary from the date of termination, and (ii) the initial stock option grant that Mr. Lee received upon commencing employment will remain exercisable for a year following the termination date. The initial stock option grant is currently fully vested, but Mr. Lee was historically entitled to an additional year of vesting under such initial stock option grant upon termination without cause prior to the full vesting of the option. In addition, the employment agreement provides that Mr. Lee is eligible to participate in the Company’s standard benefit plans and programs. Under the employment agreement, Mr. Lee is subject to a two year non-compete and non-solicit following termination of employment.

On October 5, 2020, the Company appointed Michael J. Gilbreth to serve as the Chief Financial Officer of the Company. The Company hired Mr. Gilbreth pursuant to the terms of a letter agreement and a standard and customary confidentiality, non-competition, and no-solicitation agreement. The offer letter provides for at-will employment with an annual base salary of $165,000, and an annual bonus opportunity of up to 60% of base salary. An annual minimum bonus of 25% of base salary is guaranteed, and the additional 35% is discretionary.

The following table sets forth information concerning the outstanding equity awards granted to the named executive officer as of December 31, 2021.

37

Outstanding Equity Awards at Fiscal Year-End 2021

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Securities Authorized for Issuance under Equity Compensation Plans

None.

SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT

The following table shows information regarding the beneficial ownership of our common stock by our directors, executive officers, former executive officers and greater than 5% beneficial owners as of March 14, 2022.

Beneficial ownership is determined in accordance with the rules of the SEC and generally includes any shares over which a person exercises sole or shared voting or investment power and all shares issuable upon exercise of options or the vesting of restricted stock within 60 days of March 14, 2022. For purposes of calculating the percentage of our common stock beneficially owned, the number of shares of our common stock includes 30,586,804 shares of our common stock outstanding as of March 14, 2022.

Unless otherwise indicated, each of the stockholders listed below has sole voting and investment power with respect to the shares beneficially owned.

38

The address for each director or Named Executive Officer is c/o Ascent Solar Technologies, Inc., 12300 Grant Street, Thornton, Colorado 80241.