8-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 8-K

CURRENT REPORT

Pursuant to Section 13 or 15(d) of the

Securities Exchange Act of 1934

Date of report (Date of earliest event reported): June 27, 2019

SINTX Technologies, Inc.

(Exact name of registrant as specified in its charter)

Delaware	001-33624	84-1375299
(State or other jurisdiction of incorporation)	(Commission File Number)	(IRS Employer Identification No.)

1885 West 2100 South Salt Lake City, UT	84119
(Address of principal executive offices)	(Zip Code)

Registrant’s telephone number, including area code: (801) 839-3500

(Former Name or Former Address, if Changed Since Last Report)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):

[  ]	Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
[  ]	Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
[  ]	Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))
[  ]	Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Item 5.07 Submission of Matters to a Vote of Security Holders

See disclosure in Item 8.01 herein.

Item 8.01 Other Events.

On June 27, 2019, SINTX Technologies, Inc. (the “Company”) reconvened its 2019 Annual Meeting of Stockholders (the “Annual Meeting”). The purpose of the reconvened meeting was to vote on the approval of Proposal 2 regarding the authorization of an amendment to the Company’s Restated Certificate of Incorporation to effect a reverse stock split of its issued and outstanding common stock at a ratio of between 1-for-2 and 1-for-30, inclusive, which ratio will be selected at the sole discretion of our Board of Directors at any whole number in the above range, with any fractional shares that would otherwise be issued as a result of the reverse stock split being rounded up to the nearest whole share; provided, that our Board of Directors may abandon the reverse stock split in its sole discretion.

The Annual Meeting was adjourned again and is now scheduled to reconvene on July 3, 2019, at 10:00 a.m. Mountain Time. The adjourned stockholder meeting will be reconvened at the Company’s offices, located at 1885 West 2100 South, Salt Lake City, UT 84119. The purpose of the adjournment is to allow additional time for the Company’s stockholders to vote on Proposal 2.

A copy of the press release issued by the Company with respect to the annual meeting is attached hereto as Exhibit 99.1.

Item 9.01 Financial Statements and Exhibits

(d) Exhibits

99.1 SINTX Technologies, Inc. press release dated June 27, 2019.

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

	SINTX TECHNOLOGIES, INC.
Date: June 28, 2019	/s/ B. Sonny Bal
	B. Sonny Bal
	President and Chief Executive Officer

EX-99.1

SINTX TECHNOLOGIES ANNOUNCES ADJOURNMENT OF ANNUAL MEETING OF STOCKHOLDERS UNTIL JULY 3, 2019

Annual Meeting adjourned solely with respect to Proposal 2 - Approval of Reverse Stock Split

SALT LAKE CITY, June 27, 2019 (GLOBE NEWSWIRE) - SINTX Technologies, Inc. (NASDAQ: SINT) today announced that its 2019 Annual Meeting of Stockholders (“Annual Meeting”), was adjourned with respect to Proposal 2 - Approval of Reverse Stock Split. While Proposal 2 has exceeded 68% approval based on votes cast to date, approval of more than 50% of all outstanding shares of SINTX common stock as of March 6, 2019, is necessary for the proposal to be ratified and approved. At the meeting, it was deemed that the holders of a sufficient number of SINTX’s outstanding common stock have not yet submitted proxies to indicate how their shares should be voted and additional time was needed to collect the required votes. The adjournment will allow for the solicitation of additional votes on Proposal 2. The Annual Meeting will resume with respect to Proposal 2 at 10:00 a.m. MDT on July 3, 2019 at the company’s offices located at 1855 West 2100 South, Salt Lake City, UT 84119.

The company will continue to solicit proxies from stockholders with respect to Proposal 2 during the period of adjournment. Only stockholders of record on the record date of March 6, 2019 are entitled and are being requested to vote. No further action is required by any stockholder who has submitted his or her proxy card. The company’s Board of Directors and management respectfully request all such holders as of the record date who have not yet voted their shares to do so by 11:59 p.m. EDT on Tuesday, July 2, 2019.

About SINTX Technologies

SINTX Technologies is an OEM ceramics company that develops and commercializes silicon nitride for biomedical applications, such as spine and dental implants. The core strength of SINTX Technologies is the research and development of medical-grade silicon nitride ceramics for external partners. The Company presently manufactures silicon nitride spinal implants in its FDA registered and ISO 13485 certified manufacturing facility for CTL-Amedica, the exclusive retail channel for silicon nitride spinal implants.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 (“PSLRA”) that are subject to a number of risks and uncertainties. Readers are cautioned not to place undue reliance on the forward-looking statements, which speak only as of the date on which they are made and reflect management’s current estimates, projections, expectations and beliefs. A discussion of those risks and uncertainties can be found in SINTX’s Risk Factors disclosure in its Annual Report on Form 10-K, filed with the Securities and Exchange Commission (SEC) on March 11, 2019, and in SINTX’s other filings with the SEC. SINTX disclaims any obligation to update any forward-looking statements. SINTX undertakes no obligation to publicly revise or update the forward-looking statements to reflect events or circumstances that arise after the date of this report.

Important Information

In connection with the solicitation of proxies, on March 25, 2019, SINTX Technologies, Inc. filed a definitive proxy statement with the Securities and Exchange Commission (the “SEC”) in connection with the Company’s 2019 Annual Meeting. SINTX’S STOCKHOLDERS ARE STRONGLY ADVISED TO READ THE DEFINITIVE PROXY MATERIALS AND ANY OTHER RELEVANT SOLICITATION MATERIALS FILED BY SINTX WITH THE SEC BEFORE MAKING ANY VOTING OR INVESTMENT DECISION BECAUSE THESE DOCUMENTS CONTAIN IMPORTANT INFORMATION. The Company’s proxy statement and any other materials filed by the Company with the SEC can be obtained free of charge at the SEC’s web site at www.sec.gov. The Company’s proxy statement, notice of annual meeting, and annual report to shareholders are available free of charge on our Investor Relations website at https://ir.sintx.com/annual-shareholder-materials. All stockholders may also write to us at the following address to request copies of these materials: SINTX Technologies, Inc. 1885 West 2100 South Salt Lake City, UT 84119 Attention: Corporate Secretary. The contents of the websites referenced above are not deemed to be incorporated by reference into the proxy statement.

For more information on SINTX Technologies or its silicon nitride material platform, please visit www.sintx.com.

Contact:

SINTX Technologies

801-839-3502

IR@sintx.com