UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Mark One)
x | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the fiscal year ended December 31, 2015
OR
£ | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the transition period from to
Commission File Number: 001-36083
Applied Optoelectronics, Inc.
(Exact name of registrant as specified in its charter)
Delaware | 76-0533927 |
(State or other jurisdiction of incorporation or organization) | (I.R.S. Employer Identification No.) |
13115 Jess Pirtle Blvd.
Sugar Land, TX 77478
(Address of principal executive offices)
(281) 295-1800
(Registrant’s telephone number)
Securities registered pursuant to Section 12(b) of the Act:
(Title of each class) | (Name of each exchange on which registered) | |
Common Stock, Par value $0.001 | NASDAQ Global Market |
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act of 1933 Yes o No x
Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act Yes o No x
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o
Indicate by check mark whether the Registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files). Yes x No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x
Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
(Check one):
Large accelerated filer | o | Accelerated filer | x | |||
Non-accelerated filer | o (Do not check if a smaller reporting company) | Smaller reporting company | o |
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No x
As of June 30, 2015, the aggregate market value of the voting common stock held by non-affiliates of the Registrant was approximately $250.6 million based upon the closing sales price of the Registrant’s common stock as reported on the NASDAQ Global Markets on June 30, 2015 of $17.36 per share. Shares of common stock held by officers, directors and holders of more than ten percent of the outstanding common stock have been excluded from this calculation because such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.
As of March 7, 2016, the Registrant had 17,055,597 outstanding shares of Common Stock.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the Registrant’s definitive Proxy Statement for the Registrant’s 2016 Annual Meeting of Stockholders are incorporated by reference in Part III of this Annual Report on Form 10-K to the extent stated herein. The Proxy Statement will be filed with the Securities and Exchange Commission pursuant to Regulation 14A not later than 120 days of the Registrant’s fiscal year ended December 31, 2015.
Applied Optoelectronics, Inc.
Table of Contents
Page | ||
Part I | 3 | |
Item 1. | Business | 3 |
Item 1A. | Risk Factors | 13 |
Item 1B. | Unresolved Staff Comments | 29 |
Item 2. | Properties | 30 |
Item 3. | Legal Proceedings | 30 |
Item 4. | Mine Safety Disclosure | 30 |
Part II | 31 | |
Item 5. | Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities | 31 |
Item 6. | Selected Financial Data | 33 |
Item 7. | Management’s Discussion and Analysis of Financial Condition and Results of Operations | 35 |
Item 7A. | Quantitative and Qualitative Disclosures about Market Risk | 51 |
Item 8. | Financial Statements and Supplementary Data | 52 |
Item 9. | Changes in and Disagreements with Accountants on Accounting and Financial Disclosure | 52 |
Item 9A. | Controls and Procedures | 52 |
Item 9B. | Other Information | 53 |
Part III | 54 | |
Item 10. | Directors, Executive Officers and Corporate Governance | 54 |
Item 11. | Executive Compensation | 54 |
Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters | 54 |
Item 13. | Certain Relationships and Related Transactions, and Director Independence | 54 |
Item 14. | Principal Accounting Fees and Services | 54 |
Part IV | 55 | |
Item 15. | Exhibits, Financial Statements Schedules | 55 |
Signatures | 56 |
2 |
PART I
Item 1. Business
Forward-Looking Information
This report contains forward-looking statements. These forward-looking statements involve risks and uncertainties, as well as assumptions and current expectations, which could cause the company’s actual results to differ materially from those anticipated in such forward-looking statements. These risks and uncertainties include but are not limited to: reduction in the size or quantity of customer orders; change in demand for the company’s products due to industry conditions; changes in manufacturing operations; volatility in manufacturing costs; delays in shipments of products; disruptions in the supply chain; change in the rate of design wins or the rate of customer acceptance of new products; the company’s reliance on a small number of customers for a substantial portion of its revenues; potential pricing pressure; a decline in demand for our customers products or their rate of deployment of their products; general conditions in the CATV, internet data center or FTTH markets; changes in the world economy (particularly in the United States and China); the negative effects of seasonality; and other risks and uncertainties described more fully in the company’s documents filed with or furnished to the Securities and Exchange Commission. More information about these and other risks that may impact the company’s business are set forth in the Section titled “Risk Factors”. In some cases, you can identify forward-looking statements by terminology such as ‘‘may,’’ ‘‘will,’’ ‘‘should,’’ ‘‘expects,’’ ‘‘plans,’’ ‘‘anticipates,’’ ‘‘believes,’’ or ‘‘estimates” or by other similar expressions that convey uncertainty of future events or outcomes. You should not rely on forward-looking statements as predictions of future events. All forward-looking statements in this press release are based upon information available to us as of the date hereof, and qualified in their entirety by this cautionary statement. Except as required by law, we assume no obligation to update forward-looking statements for any reason after the date of this report to conform these statements to actual results or to changes in the company’s expectations.
BUSINESS
Overview
We are a leading, vertically integrated provider of fiber-optic networking products, primarily for three networking end-markets: internet data center, cable television, or CATV, and fiber-to-the-home, or FTTH. We design and manufacture a range of optical communications products at varying levels of integration, from components, subassemblies and modules to complete turn-key equipment.
In designing products for our customers, we begin with the fundamental building blocks of lasers and laser components. From these foundational products, we design and manufacture a wide range of products to meet our customers’ needs and specifications, and such products differ from each other by their end market, intended use and level of integration. We are primarily focused on the higher-performance segments within all three of our target markets, which increasingly demand faster connectivity and innovation.
The three end markets we target are all driven by significant bandwidth demand fueled by the growth of network-connected devices, video traffic, cloud computing and online social networking. To address this increased bandwidth demand, CATV and telecommunications service providers are competing directly against each other by providing bundles of voice, video and data services to their subscribers and investing to enhance the capacity, reliability and capability of their networks. The trend of rising bandwidth consumption also impacts the internet data center market, as reflected in the shift to higher speed server connections. As a result of these trends, fiber-optic networking technology is becoming essential in all three of our target markets, as it is often the only economic way to deliver the desired bandwidth.
The internet data center market is our largest and fastest growing market. Our customers in this market are generally large internet-based (“Web 2.0”) data center operators, to whom we supply optical transceivers that plug into switches and servers within the data center and allow these network devices to send and receive data over fiber optic cables. The majority of the data center optical transceivers that we sell utilize our own lasers and subassemblies (we refer to the transceivers subassemblies as “light engines”), and we believe that our in-house technology and manufacturing capability for these lasers and subassemblies gives us an advantage over many of our competitors who often lack either development or manufacturing capabilities for these advanced optical modules.
The CATV market is our most established market, for which we supply a broad array of products including lasers, transmitters and turn-key equipment. Sales of headend, node and distribution equipment have contributed significantly to our revenue in recent years as a result of our ability to meet the needs of CATV equipment vendors who have continued to outsource both the design and manufacturing of this equipment. While equipment vendors have relied upon third parties to assemble portions of their products, within the past six years certain of our customers have accelerated the outsourcing of the design and manufacturing of both headend equipment and node equipment to third parties. The shift is due in part to the sophisticated engineering expertise needed to perform this work. We believe that our extensive high-speed optical, mixed-signal semiconductor and mechanical engineering capabilities position us well to benefit from these industry dynamics.
3 |
Our vertically integrated manufacturing model provides us several advantages, including rapid product development, fast response times to customer requests and control over product quality and manufacturing costs. We design, manufacture and integrate our own analog and digital lasers using a combination of Metal Organic Chemical Vapor Deposition, or MOCVD, and our proprietary Molecular Beam Epitaxy, or MBE, fabrication process, which we believe is unique in our industry. We manufacture the majority of the laser chips and optical components that are used in our products. The lasers we manufacture are proven to be reliable over time and highly tolerant of changes in temperature and humidity, making them well-suited to the CATV and FTTH markets where networking equipment is often installed outdoors.
In 2015, our revenue was $189.9 million and our gross margin was 31.8%. We have grown our annual revenue at a compound annual growth rate, or CAGR, of 33.6% between 2009 and 2015. In the year ended December 31, 2013, we incurred losses of $1.4 million. In the years ended December 31, 2015 and 2014, we had a net income of $ 10.8 million and $4.3 million, respectively, and our accumulated deficit at December 31, 2014 and December 31, 2015 was $79.0 million and $68.2 million, respectively. In 2015, we earned 64.9% of our total revenue from the internet data center market, and 28.3% of our total revenue from the CATV market. In 2015, our key customers in the CATV market included Cisco Systems and Biogenomics Corp., a distributor. In 2015, 2014 and 2013, Cisco Systems accounted for 10.4%, 8.9%, and 21.8%, respectively, of our revenue and Biogenomics Corp. accounted for 2.9%, 6.2% and 8.7%, respectively, of our revenue. In 2015, our key customers in the data center market included Amazon and Microsoft. In 2015, 2014, and 2013, Amazon accounted for 52.5%, 45.8%, and 18.2% of our revenue, respectively, and Microsoft accounted for 11.6%, 3.6%, and 6.1% of our revenue, respectively.
Industry Background
During 2015, our three target markets, internet data centers, CATV and FTTH, experienced a significant growth in bandwidth consumption and the corresponding need for network infrastructure improvement to support this growth.
The prevailing trends in our target markets include:
· | Trends in the Internet Data Center Market. To support the substantial increase in bandwidth consumption, internet data center operators are increasing the scale of their internet data centers and accelerating data transmission rates. As a result, there is an ongoing transition from the use of copper cable, typically at speeds up to 1 gigabit per second, to optical fiber as a transport medium, typically providing speeds from 10 gigabits per second to 100 gigabits per second. In recent years, a number of leading internet companies have adopted more open internet data center architectures, using a mix of systems and components from a variety of vendors, and in some cases designing their own equipment. For these companies, compatibility of new networking equipment with legacy infrastructure is not as important, and as a consequence, these companies are more willing to work with non-traditional equipment vendors, which we believe creates an open and growing opportunity for optical device vendors. Moreover, transmission speeds have continued to increase among the companies who have previously transitioned from copper-based to fiber-based infrastructure, resulting in opportunities for optical device vendors to supply new optical transceivers capable of operating at these higher data rates. | |
· |
Trends in the CATV Market. In recent years, CATV service providers have invested extensively to support high speed, two-way communications and we expect that they will continue to do so. In North America, in particular, CATV service providers have expressed interest in emerging new technologies like DOCSIS 3.1, which will enable them to offer higher speed connections to their customers. In order to increase available bandwidth for their customers beyond the bandwidth possible with the introduction of DOCSIS 3.1, cable MSOs have been reducing the number of customers that are connected to a single node. By reducing the number of “homes per node,” the average bandwidth available to each customer is increased. Other new technologies, such as Converged Cable Access Platform (CCAP) and “Remote PHY” are under development by cable equipment suppliers. These technologies are being developed to be a cost-effective solution to provide higher available bandwidth to CATV customers.
While equipment vendors have historically relied upon third parties only to assemble portions of their products, within the past six years, certain of our customers have accelerated the outsourcing of both the design and manufacturing of both headend equipment and node equipment to third parties. The shift is due in part to the sophisticated engineering expertise needed to perform this work, along with the proliferation of new equipment designs needed to support DOCSIS 3.1. |
4 |
· | Trends in the FTTH Market. The FTTH market generally refers to the Passive Optical Networks, or PONs, that telecommunications service providers deploy. The most commonly deployed PON technology is Gigabit PON, or GPON, which delivers up to 2.5 gigabits per second (Gbps) of data, but due to the splitting of the bandwidth among multiple users, the actual bandwidth delivered to an individual subscriber is far less than 2.5 Gbps. One approach that does support true 1 Gbps service to the home is wavelength division multiplexing PON, or WDM-PON, a technology that enables the transmission of multiple wavelengths of data over a single fiber-optic strand. |
We experience certain challenges within our target markets, including continuous pressure to innovate and deliver highly integrated products that perform reliably in harsh, demanding environments and to produce high-quality devices in large volumes at competitive prices.
Our Solutions
By addressing the challenges in our target markets, we provide the following benefits to our customers:
· | Enable customers to deliver innovative products. We leverage our extensive expertise in high-speed optical, mixed-signal semiconductor and mechanical engineering, and MOCVD and our proprietary MBE laser fabrication process to deliver technologically advanced products to our customers. |
· | Enhance efficiency and cost effectiveness of our customers’ supply chains. We design and sell products at the level of integration desired by a customer, from components to turn-key equipment, providing our customers a dependable, cost-effective and simplified supply chain. |
· | Deliver high quality, reliable products in high volume. As a vertically integrated supplier, we are able to monitor and maintain quality control throughout the production process, using our internally produced components where possible for our final products. With manufacturing facilities in the U.S., Taiwan and China, we can support high volume production and timely delivery for our customers around the world. |
· | Provide sophisticated design solutions to our customers. We believe our in-house expertise in both analog and digital optical engineering enables us to design comprehensive solutions that meet many of the different network architectures and protocols used by our customers. |
Our Strengths
Our key competitive strengths include the following:
· | Proprietary technological expertise and track record of innovation. We continue to develop innovative products by leveraging our technological expertise, including our proprietary MBE and MOCVD laser fabrication process. |
· | Innovative light engine design and manufacturing. High-speed data center interconnect transceivers increasingly rely on multiple parallel optical signals. Our expertise in designing and manufacturing light engines, which combine lasers and photodiodes with channel multiplexing and de-multiplexing elements, gives us the ability to quickly develop new products for our data center customers. | |
· | Proven system design capabilities. We have extensive expertise and proven design capabilities in high-speed optical, mixed-signal semiconductor and mechanical engineering, which we believe position us to take advantage of the continuing shift to outsourced design and manufacturing among CATV equipment vendors. |
· | Highly customized products. Most of our products have some level of customization, making it more difficult for our customers to switch rapidly to another supplier. We believe this element of customization contributes to longer product lifecycles and more stable product pricing. |
· | Industry-leading position in the CATV market. We have continued to be awarded new design and manufacturing opportunities for CATV components and equipment. We serve a majority of the largest CATV equipment manufacturers in the world and our knowledge of both their requirements and the needs of their customers (the CATV network operators) allows us to access these new opportunities. |
· | Vertically integrated, geographically distributed manufacturing model. Our vertically integrated design and manufacturing process encompasses various steps from laser design and fabrication to complete optical system design and assembly. Furthermore, we have geographically distributed our manufacturing by strategically locating our operations in the U.S., China and Taiwan to reduce development time and production costs, to better support our customers and to help protect our intellectual property. |
5 |
Our Strategy
We seek to be the leading global provider of optical components, modules and equipment for each of our three target markets, internet data centers, CATV, and FTTH. Our strategy includes the following key elements:
· | Continue to penetrate the internet data center market. In the internet data center market, we primarily target internet data center operators who have adopted an open system architecture—one in which the optical connectivity solutions can be provided by a different vendor than the vendor which provides their servers and switches. | |
· | Extend our leadership in CATV networking. We intend to maintain our position as the leading producer of optical components used in CATV networks, and to capture an increasing share of the CATV equipment market as the major equipment vendors continue to outsource the design and manufacturing of such products. |
· | Continue to penetrate the FTTH market. We believe our WDM-PON technology is a cost-effective solution for delivering 1 Gbps bandwidth to a home. We intend to capture an increasing share of the FTTH market by delivering optical modules enabling 1 Gbps synchronous service to the home through our customers, who are either internet service providers or manufacturers of networking equipment supplying internet service providers. | |
· | Continue to invest in our capabilities and infrastructure. We intend to continue to invest in new products, new technology and our production infrastructure and facilities to maintain and strengthen our competitive position. We engage in an active research and development program to develop new products and enhance existing products. |
· | Selectively pursue other opportunities that leverage our existing expertise. Our expertise in designing and manufacturing outdoor equipment for the CATV industry positions us well to pursue applications that are also characterized by having varying and demanding environments, including wireless and wireline telecom infrastructure, industrial robotics, aerospace and defense, and oil and gas exploration. |
· | Pursue complementary acquisition and strategic alliance opportunities. We evaluate and selectively pursue acquisition opportunities or strategic alliances that we believe will enhance or complement our current product offerings, augment our technology roadmap, or diversify our revenue base. |
Our Technology
We believe that we have technology leadership in four key areas: semiconductor laser manufacturing, electronic technologies that enhance the performance of our lasers, optical hybrid integration and mixed-signal semiconductor design.
· | Differentiated semiconductor laser manufacturing. We use a combination of MBE and MOCVD processes in the fabrication of our lasers. We believe that the combination of these two epitaxial processes allows our products to benefit from the advantages afforded by each of these techniques. Among the differentiators of MBE relative to MOCVD fabrication are a lower process temperature and the use of solid phase materials rather than gaseous sources to grow wafers and the growth of more highly strained crystals. These factors contribute to longer operating lives of our lasers, improved laser efficiency and threshold current, among other performance attributes that make them well-suited to our target markets. While we believe that these advantages of MBE are important, MBE does have disadvantages including the inability to use certain dopant materials (for example Iron), difficulty in certain types of regrowth, and the necessity to maintain complex ultra-high vacuum equipment. By utilizing MOCVD in a portion of our production process, we are able to ameliorate some of these disadvantages. However, the epitaxial and processing steps required in the fabrication of our devices are very complex, with numerous critical steps requiring highly precise control. As a result of some of these challenges, production yields and the performance attributes of laser devices are highly variable and optimizing these characteristics requires numerous enhancements and modifications to standard MBE equipment and the MBE process. To our knowledge, we are unique in incorporating MBE processes in the production of communications lasers in high volume, and believe it would be difficult and time-consuming for other vendors to replicate our production technology. |
· | Laser enhancement technology. Certain properties of the semiconductor lasers predominantly used in traditional communications devices, such as chirp and wavelength drift, negatively affect their ability to transmit signals over long fiber distances or prevent them from transmitting signals with acceptable fidelity in certain applications. We have developed laser enhancement circuitry that can correct many of these deficiencies. We believe that our technology will become more essential with wider deployment of higher capacity CATV and FTTH systems, which place more stringent demands on laser performance. |
6 |
· |
Optical hybrid-integration technology. Reducing the size, power consumption and complexity of optical devices is essential for achieving the price and performance targets of our customers. Our ability to integrate multiple optical networking functions into a single device and to co-package multiple devices into smaller form factors helps us meet customer requirements, and we believe can also create new opportunities. For instance, the transmission speed between network elements (switches and servers, for example) within the data center has continued to increase. However, the rate at which this data can be converted from electrical signals to optical signals by laser diodes has not increased at the same pace. Therefore, to achieve data rates of 40 Gbps and above, many customers utilize multiple lower data rate lasers co-packaged together into a single optical module, which we refer to as a light engine. The technology required to cost-effectively and reliably co-package these lasers and the associated electronic control circuitry is complex. Our extensive experience with the processes and the manufacturing technologies required to produce these devices gives us a competitive advantage. |
Similarly, in FTTH networks, installing new fiber-optic cable is expensive and difficult, and in some situations prohibitively so for a network service provider. As a consequence, network operators seek to maximize the utilization of their installed fiber plant. In long-haul and metropolitan networks, the number of service providers who deployed WDM technology as fiber utilization rose. Fiber utilization in access networks is rising, but the use of WDM technology in the access segment has been problematic due to the relatively high cost and power consumption of the requisite optical devices. We have developed proprietary miniaturized optical packaging, electronic control circuitry and testing algorithms to create a hybrid WDM-PON solution that addresses these historical impediments that we believe will make WDM-PON a cost-effective alternative for deployment. | ||
· | Mixed-signal design. As CATV providers continue to evolve from primarily broadcast-video content providers to a mixture of HD video content together with data-connectivity providers, the networks they utilize to offer these services must evolve as well. Older analog networks are giving way to hybrid networks that incorporate both analog and digital signals. For example, many newer networks are being designed with “digital return-path” capabilities. In this type of network, signals traveling from the headend to the residence are transported as analog signals, whereas signals traveling in the opposite direction (that is, originating at the residence and being transmitted towards the headend) are carried as digital signals. This combination of analog and digital signaling creates unique design challenges. Our engineers have many years of experience in developing equipment, modules and components that are well suited to these sorts of mixed-signal architectures. We believe that having deep experience in both digital and analog signaling allows us to offer superior solutions to our customers, compared with companies who have expertise in only one of these signal types. |
Our Products
Our products include an array of optical communications solutions at varying levels of integration. We begin from the fundamental building blocks of lasers and laser components. From these foundational products, we design and manufacture a wide range of products from optical modules to complete turn-key equipment. We design our products to target customers in our identified markets to meet their needs and specifications.
Our components often incorporate one or more of our optical laser chips inside a precision housing that provides mechanical protection as well as standardized electrical contacts. More complex optical components may also include optical filters (for example, for use in WDM) or other optical elements by which optical signals are routed internally within the component. These more advanced components may also include coolers, heaters and sensors that allow the temperature of the laser chip to be measured and controlled. We manufacture the majority of the laser chips and optical components that are used in our own products.
At the next level of integration, our module or sub-assembly products typically contain one or more of our optical components and some additional control circuitry. Examples of modules include our transceiver line primarily used in internet data center markets and FTTH markets.
At the highest level of integration and complexity, our equipment products typically contain one or more optical components, modules and additional electronic control circuitry required to enable these subsystems to operate independently. For example, our CATV transmitter equipment requires utilization of our optical components and assembly onto a circuit board and to an external housing. Examples of equipment include our CATV transmitter and CATV nodes.
7 |
Intellectual Property
We rely on a combination of patent, copyright, trademark and trade secret laws, as well as confidentiality and licensing arrangements, to establish and protect our intellectual property. We employ various methods to protect these intellectual property rights, including maintaining a technological infrastructure with significant security measures, limiting disclosure and restricting access to only those individuals with an operational need for such information, and having employees, consultants and suppliers execute confidentiality agreements with us. While we expect our intellectual property to provide competitive advantages, we also find meaningful value from unpatented proprietary process knowledge, know-how and trade secrets.
Patents
As of December 31, 2015, we owned a total of 74 U.S. issued patents and 104 patents issued in China and Taiwan, plus a number of pending US and foreign/international patent applications. Our issued US and foreign patents will expire between 2016 and 2034.
Our portfolio of patents and patent applications covers several different technology families including:
· | laser structure and design; |
· | optical signal conditioning and laser control;. |
· | laser fabrication; |
· | photodiode and optical receiver design and fabrication; |
· | optical device and module designs; |
· | optical device packaging equipment and techniques; and |
· | optical network enhancements. |
Trademarks
We have registered the trademarks APPLIED OPTOELECTRONICS, INC., AOI and our logo with the U.S. Patent and Trademark Office on the Principal Register. These marks are also registered in, or have applications for registration pending in, various foreign trademark offices.
Research and Development
To maintain our growth and competitiveness, we engage in an active research and development program to develop new products and enhance existing products. As a result of these efforts, we anticipate releasing various new or enhanced products over the next several years. Our research and development expenses were approximately $20.9 million, $16.0 million, and $8.5 million for the years 2015, 2014 and 2013, respectively.
As of December 31, 2015, we had a total of 268 employees working in the R&D department, including 18 with Ph.D. degrees. We continue to recruit talented engineers to further enhance our research and development capabilities. We have research and development departments in our facilities in Texas, Georgia, China and Taiwan. Our research and development teams collaborate on joint projects, and by co-locating with our manufacturing operations enable us to achieve an efficient cost structure and improve our time to market.
A key factor in our research and development success is our highly collaborative process for new product development. Particularly in our equipment and module businesses, we often collaborate very closely with our customers from a very early stage in product development. By purposefully fostering this close collaboration, we believe that we can more rapidly develop leading solutions meeting the needs of our customers.
8 |
Manufacturing and Operations
We have three manufacturing sites: Sugar Land, Texas, Ningbo, China and Taipei, Taiwan. Our research and development functions are generally partnered with our manufacturing locations. In our U.S. facility, we manufacture laser chips (utilizing our MBE and MOCVD process), subassemblies and components. The subassemblies are used in the manufacture of components by our other manufacturing facilities or sold to third parties as modules. We manufacture our laser chips only within our U.S. facility, where our laser design team is located. In our Taiwan location, we manufacture optical components, such as our butterfly lasers, which incorporate laser chips, subassemblies and components manufactured within our U.S. facility. In addition, in our Taiwan location, we manufacture transceivers for the internet data center, FTTH, and other markets. In our China facility, we take advantage of lower labor costs and manufacture certain more labor intensive components and optical equipment systems, such as optical subassemblies for the internet data center market, CATV transmitters (at the headend) and CATV outdoor equipment (at the node). Each facility conducts testing on the components, modules or subsystems it manufactures and each facility is certified to ISO 9001:2008.
Our products are sold to our customers worldwide and also supply our internal component needs for the transceivers and equipment we manufacture. With a vertically integrated manufacturing process, we produce many of our own laser chips and other parts required to manufacture our optical components. Through this model, we are able to reduce development time and product costs as well as enhance quality control. We incorporate our own components into our transceivers, subsystems and equipment products wherever possible. In instances where we do not produce components ourselves, we source them from external suppliers and regularly evaluate these relationships in an attempt to reduce risk and lower cost.
We depend on a limited number of suppliers for certain raw materials and components used in our products. We regularly review our vendor relationships in an attempt to mitigate risks and lower costs, especially where we depend on one or two vendors for critical components or raw materials. While maintaining inventories that we believe are sufficient to meet our near-term needs, we strive not to carry significant inventories of externally sourced raw materials. Accordingly, we maintain ongoing communications with our vendors in order to help prevent any interruptions in supply, and have implemented a supply-chain management program to maintain quality and lower purchase prices through standardized purchasing efficiencies and design requirements.
Customers
Our customers are primarily internet data center operators, CATV and telecommunications equipment manufacturers, and internet service providers. We generally employ a direct sales model in North America and in the rest of the world we use both direct and indirect sales channels. In 2015, 2014 and 2013, we obtained 95.7%, 92.6% and 88.4% of our revenue, respectively, through our direct sales efforts and the remainder of our revenue through our indirect sales channels. Our sales channel partners provide logistical services and day-to-day customer support. Where we sell through an indirect sales channel, we work with the end customer to establish technological specifications for our products. Our equipment customers typically offer our equipment under their brand-name and our equipment is often customized with unique design or performance criteria by each of these customers. We also from time to time offer design or manufacturing services to customers to assist them in more effectively using our products and realizing time-to-market advantages.
In 2015, the two customers who contributed most to our data center revenue were Amazon.com and Microsoft. Our CATV products were used by the three largest CATV OEMs, consisting of Cisco Systems, Inc., Arris Group Inc. (which acquired the Motorola Home Business in 2013) and Aurora Networks, a subsidiary of Pace plc (which acquired Harmonic Inc.’s optical business in 2013 and itself being acquired by Pace plc subsequently). In 2016, Arris Group Inc. completed its purchase of Pace plc, making the combined company one of our largest CATV customers. The two customers that contributed most to our revenue in the FTTH market in 2015 were Genexis B.V. and a leading internet service provider. In 2015, revenue from the internet data center market, CATV market, FTTH market and other markets provided 64.9%, 28.3%, 1.3%, and 5.5% of our revenue, respectively, compared to 49.4%, 36.9%, 10.4%, and 3.8%, respectively, in 2014.
In addition to our three main target markets, we also manufacture and sell optical products designed for telecommunications. These products include optical products designed to transmit signals used in 4G Long Term Evolution, or LTE, mobile networks, and various products targeted at the metro-scale telecommunications networking market. We have various other products designed for diverse applications, both inside and outside of communications technology, which generally are derivatives of products developed for our three target markets.
We support our sales efforts by attendance at industry trade shows, technical conferences, advertising in various trade journals and magazines and other promotional efforts. These efforts are aimed at attracting new customers and enhancing our existing customer relationships.
9 |
Backlog
We generally make sales pursuant to short-term purchase orders without deposits and subject to rescheduling, revision or cancellation on short notice. We accordingly believe that purchase orders are not an accurate indicator of our future sales and any backlog of purchase orders is not a reliable indicator of our future revenue.
Financial Information by Geographic Region
For information regarding our revenue and long-lived assets by geographic region, see Note N to the Consolidated Financial Statements. For risks relating to our operations see “Item 1A. Risk Factors” and particularly the risks under the caption “Risks related to our operations in China.”
Competition
The optical networking market is intensely competitive. Because of the broad nature of our product offerings, we do not believe that we face a single major competitor across all of our markets. We do, however, experience intense competition in each product area from a number of manufacturers and we anticipate that competition will increase. Our major competitors in one or more of our markets include EMCORE Corporation, Finisar Corporation, Foxconn Interconnect Technology Ltd., Lumentum Holding, Inc., Mitsubishi, Molex, LLC, Oclaro, Inc., Source Photonics, and Sumitomo Electric Industries, Ltd.
Many of our competitors are larger than we are and have significantly greater financial, marketing and other resources.
In addition, several of our competitors have large market capitalizations or cash reserves and are much better positioned to acquire other companies to gain new technologies or products that may displace our products. Network equipment providers, who are our customers, and network service providers, who are supplied by our customers, may decide to manufacture the optical subsystems incorporated into their network systems in-house. We also encounter potential customers that, because of existing relationships, are committed to the products offered by these competitors.
We believe the principal competitive factors in our target markets include the following:
· | use of internally manufactured components; |
· | product breadth and functionality; |
· | timing and pace of new product development; |
· | breadth of customer base; |
· | technological expertise; |
· | reliability of products; |
· | product pricing; and |
· | manufacturing efficiency. |
We believe that we compete favorably with respect to the above factors based on our MBE and MOCVD processes, our vertically integrated model, the performance and reliability of our product offerings, and our technical expertise in light engine design and manufacture.
Employees
As of December 31, 2015, we employed 2,513 full-time employees, of which 34 held Ph.D. degrees in a science or engineering field. Of our employees 257 are located in the U.S., 1,186 are located in Taiwan, and 1,070 are located in China. None of our employees are represented by any collective bargaining agreement, but certain employees of our China subsidiary are members of a trade union. We have never suffered any work stoppage and believe that we have satisfactory relations with our employees.
10 |
Environmental Matters
Our research and development and manufacturing operations and our products are subject to a variety of federal, state, local and foreign environmental, health and safety laws and regulations, including those governing discharges of pollutants to air and water, the use, storage, handling and disposal of hazardous materials, employee health and safety, and the hazardous material content in our products. Our environmental management systems in our facilities in Sugar Land, TX, Ningbo, China and Taipei, Taiwan are all certified to meet the requirements of ISO14001:2004. However, there can be no assurance that violations of applicable laws at any of our facilities will not occur in the future as a result of human error, accident, equipment failure or other causes. We use, store and dispose of hazardous materials in our manufacturing operations and hazardous materials are present in our products. We incur costs to comply with environmental, health and safety requirements, and any failure to comply, or the identification of contamination for which we are found liable, could cause us to incur substantial costs, including cleanup costs, monetary fines, or civil or criminal penalties, and subject us to property damage and personal injury claims, and result in the suspension of production, alteration of our manufacturing processes, redesign of our products, or curtailment of sales and adverse publicity. Liability under environmental, health and safety laws can be joint and several and without regard to fault or negligence. For example, pursuant to environmental laws and regulations, including but not limited to the Comprehensive Environmental Response Compensation and Liability Act, or CERCLA, we may be liable for the full amount of any remediation-related costs at properties we currently own or formerly owned, such as our currently owned Sugar Land, Texas facility, or at properties at which we operated, as well as at properties we will own or operate in the future, and properties to which we have sent hazardous substances, whether or not we caused the contamination.
We expect that our operations and products will be affected by new environmental requirements on an ongoing basis. Environmental, health and safety requirements have become more stringent over time, and changes to existing requirements could restrict our ability to expand our facilities, require us to acquire costly pollution control equipment, or cause us to incur other significant expenses or to modify our manufacturing processes or the hazardous material content of our products. Identification of presently unidentified environmental conditions, more vigorous enforcement by a governmental authority, enactment of more stringent legal requirements or other unanticipated events could give rise to adverse publicity, restrict our operations, affect the design or marketability of our products or otherwise cause us to incur material environmental costs.
We face increasing complexity in our product design and procurement operations as we adjust to new and upcoming requirements relating to the materials composition of our products. Some jurisdictions in which our products are sold have enacted requirements regarding the hazardous material content of certain products. For example, member states of the European Union and China are among a growing number of jurisdictions that have placed restrictions on the use of lead, among other chemicals, in electronic products, which affect the composition and packaging of our products. The passage of such requirements in additional jurisdictions, or the tightening of standards or elimination of certain exemptions in jurisdictions where our products are already subject to such requirements, could cause us to incur significant expenditures to make our products compliant with new requirements, or could limit the markets into which we may sell our products. Other governmental regulations may require us to reengineer our products to use components that are more environmentally compatible, resulting in additional costs to us.
Sources of Raw Materials
We depend on a limited number of suppliers for certain raw materials, components, and equipment used in our products. We continually review our supplier relationships to mitigate risks and lower costs, especially where we depend on one or two suppliers for critical components or raw materials. While maintaining inventories that we believe are sufficient to meet our near-term needs, we strive not to carry significant inventories of raw materials. Accordingly, we maintain ongoing communications with our suppliers in order to prevent any interruptions in supply, and have implemented a supply-chain management program to maintain quality and lower purchase prices through standardized purchasing efficiencies and design requirements. To date, we generally have been able to obtain sufficient quantities of critical supplies in a timely manner.
We are subject to rules promulgated by the SEC pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act regarding the use of "conflict minerals". These rules have imposed and will continue to impose additional costs and may introduce new risks related to our ability to verify the origin of any "conflict minerals" used in our products.
Export Regulations
The Bureau of Industry and Security (BIS) of the U.S. Department of Commerce is responsible for regulating the export of most commercial items that are classified as dual-use goods that may have both commercial and military applications. A limited number of our products are exported by license under the Export Control Classification Number, or ECCN, of 5A991. Export Control Classification requirements are dependent upon an item’s technical characteristics, the destination, the end-use, and the end-user, and other activities of the end-user. Should the ECCN change, then the export of our products to certain countries would be restricted. However, we currently do not export our products to any countries on the restricted list, and therefore a change in the ECCN would not materially impact our business.
11 |
Corporate Information
We were incorporated in the State of Texas in 1997. In March 2013, Applied Optoelectronics, Inc., a Texas corporation, converted into a Delaware corporation. Prime World International Holdings, Ltd. (“Prime World”) is a wholly-owned subsidiary of the Company incorporated in the British Virgin Islands on January 13, 2006. Prime World is the parent company of Global Technology, Inc. (“Global”). Global was established in June 2002 in the People’s Republic of China (“PRC”) and was acquired by Prime World on March 30, 2006. The Company also operates a division, AOI—Taiwan, which is qualified to do business in Taiwan and primarily manufactures transceivers and performs research and development activities.
Our principal executive offices are located at 13115 Jess Pirtle Blvd., Sugar Land, TX 77478, and our telephone number is (281) 295-1800. Our website address is www.ao-inc.com. Information contained on our website is not incorporated by reference into this Annual Report on Form 10-K.
Available Information
We file electronically with the United States Securities and Exchange Commission, or SEC, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended. We make available on our website at www.ao-inc.com free of charge, copies of these reports as soon as reasonably practicable after filing these reports with, or furnishing them to, the SEC.
12 |
Item 1A. Risk Factors
Investing in our common stock involves a high degree of risk. You should carefully consider the following risk factors and all other information contained in this Annual Report on Form 10-K, including our consolidated financial statements and related notes. If any of the following risks actually occur, we may be unable to conduct our business as currently planned and our financial condition and results of operations could be seriously harmed. In addition, the trading price of our common stock could decline due to the occurrence of any of these risks and you may lose all or part of your investment.
Risks Inherent in Our Business
We are dependent on our key customers for a significant portion of our revenue and the loss of, or a significant reduction in orders from, any of our key customers would adversely impact our revenue and results of operations.
We generate much of our revenue from a limited number of customers. In 2015, 2014 and 2013, our top ten customers represented 88.7%, 87.2% and 76.9% of our revenue, respectively. In 2015, Amazon represented 52.5% of our revenue and Microsoft represented 11.6% of our revenue. As a result, the loss of, or a significant reduction in orders from any of our key customers would materially and adversely affect our revenue and results of operations. We typically do not have long-term contracts with our customers and instead rely on recurring purchase orders. If our key customers do not continue to purchase our existing products or fail to purchase additional products from us, our revenue would decline and our results of operations would be adversely affected.
Adverse events affecting our key customers could also negatively affect our ability to retain their business and obtain new purchase orders, which could adversely affect our revenue and results of operations. For example, in recent years, there has been consolidation among various network equipment manufacturers and this trend is expected to continue. For example, in January 2016, Arris Group Inc. (“Arris”) completed plans to purchase Pace Plc (“Pace”). Pace and Arris have historically been our customers, and if we fail to achieve historical levels of sales of our products to the new entity, the loss or reduction in sales could have an adverse effect on our business, financial condition, results of operations, and cash flows. We are unable to predict the impact that industry consolidation would have on our existing or potential customers. We may not be able to offset any potential decline in revenue arising from the consolidation of our existing customers with revenue from new customers or additional revenue from the merged company.
If our customers do not qualify our products for use on a timely basis, our results of operations may suffer.
Prior to the sale of new products, our customers typically require us to “qualify” our products for use in their applications. At the successful completion of this qualification process,we refer to the resulting sales opportunity as a “design win.” Additionally, new customers often audit our manufacturing facilities and perform other evaluations during this qualification process. The qualification process involves product sampling and reliability testing and collaboration with our product management and engineering teams in the design and manufacturing stages. If we are unable to accurately predict the amount of time required to qualify our products with customers, or are unable to qualify our products with certain customers at all, then our ability to generate revenue could be delayed or our revenue would be lower than expected and we may not be able to recover the costs associated with the qualification process or with our product development efforts, which would have an adverse effect on our results of operations.
In addition, due to rapid technological changes in our markets, a customer may cancel or modify a design project before we have qualified our product or begun volume manufacturing of a qualified product. It is unlikely that we would be able to recover the expenses for cancelled or unutilized custom design projects. Some of these unrecoverable expenses for cancelled or unutilized custom design projects may be significant. It is difficult to predict with any certainty whether our customers will delay or terminate product qualification or the frequency with which customers will cancel or modify their projects, but any such delay, cancellation or modification would have a negative effect on our results of operations.
Our ability to successfully qualify and scale capacity for new technologies and products is important to our ability to grow our business and market presence, and we may invest a significant amount to scale our capacity to meet potential demand from customers for our new technologies and products. If we are unable to qualify and sell any of our new products in volume, on time, or at all, our results of operations may be adversely affected.
13 |
Customer demand is difficult to forecast accurately and, as a result, we may be unable to match production with customer demand.
We make planning and spending decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimates of product demand and customer requirements. Our products are typically purchased pursuant to individual purchase orders. While our customers may provide us with their demand forecasts, they are typically not contractually committed to buy any quantity of products beyond firm purchase orders. Furthermore, many of our customers may increase, decrease, cancel or delay purchase orders already in place without significant penalty. The short-term nature of commitments by our customers and the possibility of unexpected changes in demand for their products reduce our ability to accurately estimate future customer requirements. On occasion, customers may require rapid increases in production, which can strain our resources, cause our manufacturing to be negatively impacted by materials shortages, necessitate more onerous procurement commitments and reduce our gross margin. We may not have sufficient capacity at any given time to meet the volume demands of our customers, or one or more of our suppliers may not have sufficient capacity at any given time to meet our volume demands. If any of our major customers decrease, stop or delay purchasing our products for any reason, we will likely have excess manufacturing capacity or inventory and our business and results of operations would be harmed.
We face intense competition which could negatively impact our results of operations and market share.
The markets into which we sell our products are highly competitive. Our competitors range from large, international companies offering a wide range of products to smaller companies specializing in niche markets. Current and potential competitors may have substantially greater name recognition, financial, marketing, research and manufacturing resources than we do, and there can be no assurance that our current and future competitors will not be more successful than us in specific product lines or markets. Some of our competitors may also have better-established relationships with our current or potential customers. Some of our competitors have more resources to develop or acquire new products and technologies and create market awareness for their products and technologies. In addition, some of our competitors have the financial resources to offer competitive products at below-market pricing levels that could prevent us from competing effectively and result in a loss of sales or market share or cause us to lower prices for our products. In recent years, there has been consolidation in our industry and we expect such consolidation to continue. Consolidation involving our competitors could result in even more intense competition. Network equipment manufacturers, who are our customers, and network service providers may decide to manufacture the optical subsystems incorporated into their network systems in-house instead of outsourcing such products to companies such as us. We also encounter potential customers that, because of existing relationships with our competitors, are committed to the products offered by our competitors.
We are subject to the cyclical nature of the markets in which we compete and any future downturn will likely reduce demand for our products and revenue.
In each of our target markets, including the CATV market, our sales depend on the aggregate capital expenditures of service providers as they build out and upgrade their network infrastructure. These markets are highly cyclical and characterized by constant and rapid technological change, price erosion, evolving standards and wide fluctuations in product supply and demand. In the past, these markets have experienced significant downturns, often connected with, or in anticipation of, the maturation of product cycles. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. Our historical results of operations have been subject to these cyclical fluctuations, and we may experience substantial period-to-period fluctuations in our future results of operations. Any future downturn in any of the markets in which we compete could significantly reduce the demand for our products and therefore may result in a significant reduction in our revenue. Our revenue and results of operations may be materially and adversely affected in the future due to changes in demand from individual customers or cyclical changes in any of the markets utilizing our products. We may not be able to accurately predict these cyclical fluctuations and the impact of these fluctuations may have on our revenue and operating results.
We must continually develop successful new products and enhance existing products, and if we fail to do so or if our release of new or enhanced products is delayed, our business may be harmed.
The markets for our products are characterized by frequent new product introductions, changes in customer requirements and evolving industry standards, all with an underlying pressure to reduce cost and meet stringent reliability and qualification requirements. Our future performance will depend on our successful development, introduction and market acceptance of new and enhanced products that address these challenges. If we are unable to make our new or enhanced products commercially available on a timely basis, we may lose existing and potential customers and our financial results would suffer.
In addition, due to the costs and length of research, development and manufacturing process cycles, we may not recognize revenue from new products until long after such expenditures, if at all, and our margins may decrease if our costs are higher than expected, adversely affecting our financial condition and results of operation.
Although the length of our product development cycle varies widely by product and customer, it may take 18 months or longer before we receive our first order. As a result, we may incur significant expenses long before customers accept and purchase our products.
14 |
Product development delays may result from numerous factors, including:
· | modification of product specifications and customer requirements; |
· | unanticipated engineering complexities; |
· | difficulties in reallocating engineering resources and overcoming resource limitations; and | |
· | rapidly changing technology or competitive product requirements. |
The introduction of new products by us or our competitors could result in a slowdown in demand for our existing products and could result in a write-down in the value of our inventory. We have in the past experienced a slowdown in demand for existing products and delays in new product development, and such delays will likely occur in the future. To the extent we experience product development delays for any reason or we fail to qualify our products and obtain their approval for use, which we refer to as a design win, our competitive position would be adversely affected and our ability to grow our revenue would be impaired.
Furthermore, our ability to enter a market with new products in a timely manner can be critical to our success because it is difficult to displace an existing supplier for a particular type of product once a customer has chosen a supplier, even if a later-to-market product provides better performance or cost efficiency.
The development of new, technologically advanced products is a complex and uncertain process requiring frequent innovation, highly-skilled engineering and development personnel and significant capital, as well as the accurate anticipation of technological and market trends. We cannot assure you that we will be able to identify, develop, manufacture, market or support new or enhanced products successfully or on a timely basis. Further, we cannot assure you that our new products will gain market acceptance or that we will be able to respond effectively to product introductions by competitors, technological changes or emerging industry standards. We also may not be able to develop the underlying core technologies necessary to create new products and enhancements, license these technologies from third parties, or remain competitive in our markets.
If the CATV market does not continue to develop as we expect, or if there is any downturn in this market, our business would be adversely affected.
Historically, we have generated much of our revenue from the CATV market. In 2015, 2014 and 2013, the CATV market represented 28.3%, 36.3% and 60.4% of our revenue, respectively. In the CATV market, we are relying on expected increasing demand for bandwidth-intensive services and applications such as on-demand television programs, high-definition television channels, or HDTV, social media, peer-to-peer file sharing and online video creation and viewing from network service providers. Without network and bandwidth growth, the need for our products will not increase and may decline, adversely affecting our financial condition and results of operations. Although demand for broadband access is increasing, network and bandwidth growth may be limited by several factors, including an uncertain regulatory environment, high infrastructure costs to purchase and install equipment and uncertainty as to which competing content delivery solution, such as telecommunications, wireless or satellite, will gain the most widespread acceptance. CATV network operators may reduce or forego equipment purchases in anticipation of the availability of next generation DOCSIS 3.1 solutions that are expected to be available soon, which may adversely affect our sales. If the trend of outsourcing for the design and manufacture of CATV equipment does not continue, or continues at a slower pace than currently expected, our customers’ demand for our design and manufacturing services may not grow as quickly as expected. If expectations for the growth of the CATV market are not realized, our financial condition or results of operations will be adversely affected. In addition, if the CATV market is adversely impacted, whether due to competitive pressure from telecommunication service providers, regulatory changes, or otherwise, our business would be adversely affected. We may not be able to offset any potential decline in revenue from the CATV market with revenue from new customers in other markets.
We will be expanding to new facilities in our Sugar Land, TX location. These facilities will add significant additional costs and if we fail to adequately utilize the additional production capacity, our results of operations will suffer.
In 2015, we began construction of two new buildings located immediately adjacent to our existing headquarters building in Sugar Land, TX. The projected cost of construction for these new facilities is approximately $33 million, and we expect to invest significant additional resources to add production equipment to the new facilities. Much of this equipment must be ordered far in advance of its delivery date, and accordingly we must make the decision to purchase equipment long before we see additional orders for our products. While we endeavor to order equipment that is flexible in utilization, if we over-estimate aggregate demand for our products, or if we fail to accurately predict the types of products that customers will demand in the future, we may be forced to under-utilize this equipment, which could result in asset impairment charges, additional costs to reconfigure equipment to be used in other production, or other charges that would negatively affect our results of operations.
15 |
Our new factory in Sugar Land, TX may experience unforeseen difficulties in commencing operations, or may cost more than we expect to bring online.
We expect to complete our new facility in Sugar Land, TX in the second quarter of 2016. However, construction delays or difficulties that may arise in the new facility may result in delays to the commencement of operations in the new facility, or may cause us to incur additional costs to fix any deficiencies in the new facility. We expect to begin utilizing the additional production capacity from the new facility in 2016, and any delay to our start-up schedule could cause us to have insufficient production capacity to meet customer orders. If we are unable to produce sufficient products to meet customer demand, it would negatively affect our sales, competitive position and reputation.
We have limited operating history in the FTTH market, and our business could be harmed if this market does not develop as we expect.
For 2014 and 2015, respectively, we generated 10.4%, and 1.3% of our revenue from the FTTH market. We have only recently begun offering products to the FTTH market, and our WDM-PON products designed for this market have not yet, and may never, gain widespread acceptance by large internet service providers. Our business in this market is dependent on the deployment of our optical components, modules and subassemblies. We are relying on increasing demand for bandwidth-intensive services and telecommunications service providers’ acceptance and deployment of WDM-PON as a technology supporting 1 gigabit per second service to the home. Without network and bandwidth growth and adoption of our solutions by operators in these markets, we will not be able to sell our products in these markets in high volume or at our targeted margins, which would adversely affect our financial condition and results of operations. For example, WDM-PON technology may not be adopted by equipment and service providers in the FTTH market as rapidly as we expect or in the volumes we need to achieve acceptable margins. Network and bandwidth growth may be limited by several factors, including an uncertain regulatory environment, high infrastructure costs to purchase and install equipment and uncertainty as to which competing content delivery solution, such as CATV, will gain the most widespread acceptance. In addition, as we enter new markets or expand our product offerings in existing markets, our margins may be adversely affected due to competition in those markets and commoditization of competing products. If our expectations for the growth of these markets are not realized, our financial condition or results of operations will be adversely affected.
If we encounter manufacturing problems, we may lose sales and damage our customer relationships.
We may experience delays, disruptions or quality control problems in our manufacturing operations. These and other factors may cause less than acceptable yields at our wafer fabrication facility. Manufacturing yields depend on a number of factors, including the quality of available raw materials, the degradation or change in equipment calibration and the rate and timing of the introduction of new products. Changes in manufacturing processes required as a result of changes in product specifications, changing customer needs and the introduction of new product lines may significantly reduce our manufacturing yields, resulting in low or negative margins on those products. In addition, we use an MBE fabrication process to make our lasers, in addition to Metal Organic Chemical Vapor Deposition, or MOCVD, the technique most commonly used in optical manufacturing by communications optics vendors, and our Molecular Beam Epitaxy, or MBE, fabrication process relies on custom-manufactured equipment. If our MBE or MOCVD fabrication facility in Sugar Land, Texas were to be damaged or destroyed for any reason, our manufacturing process would be severely disrupted. Any such manufacturing problems would likely delay product shipments to our customers, which would negatively affect our sales, competitive position and reputation. We may also experience delays in production, typically in February, during the Chinese New Year holiday when our facilities in China and Taiwan are closed.
Increasing costs and shifts in product mix may adversely impact our gross margins.
Our gross margins on individual products and among products fluctuate over each product’s life cycle. Our overall gross margins have fluctuated from period to period as a result of shifts in product mix, the introduction of new products, decreases in average selling prices and our ability to reduce product costs, and these fluctuations are expected to continue in the future. We may not be able to accurately predict our product mix from period to period, and as a result we may not be able to forecast accurately our overall gross margins. The rate of increase in our costs and expenses may exceed the rate of increase in our revenue, either of which would materially and adversely affect our business, our results of operations and our financial condition.
Given the high fixed costs associated with our vertically integrated business, a reduction in demand for our products will likely adversely impact our gross profits and our results of operations.
We have a high fixed cost base due to our vertically integrated business model, including the fact that 1,960 of our employees as of December 31, 2015 were employed in manufacturing and research and development operations. We may not be able to adjust these fixed costs quickly to adapt to rapidly changing market conditions. Our gross profit and gross margin are greatly affected by our sales volume and volatility on a quarterly basis and the corresponding absorption of fixed manufacturing overhead expenses. In addition, because we are a vertically integrated manufacturer, insufficient demand for our products may subject us to the risk of high inventory carrying costs and increased inventory obsolescence. Given our vertical integration, the rate at which we turn inventory has historically been low when compared to our cost of sales. We do not expect this to change significantly in the future and believe that we will have to maintain a relatively high level of inventory compared to our cost of sales. As a result, we continue to expect to have a significant amount of working capital invested in inventory. We may be required to write down inventory costs in the future and our high inventory costs may have an adverse effect on our gross profits and our results of operations.
16 |
We have a history of losses and have a substantial accumulated deficit.
We have a history of losses and have a substantial accumulated deficit. In the years ended December 31, 2013 and 2012, we experienced net losses of $1.4 million and $0.9 million, respectively. In 2014 and 2015, we experienced profit of $4.3 million and $10.8 million, respectively. As of December 31, 2015 and 2014, our accumulated deficit was $68.2 million and $79.0 million, respectively. Our losses in past years were due to expenditures made to expand our business, including expenditures for hiring additional research and development, and sales and marketing personnel, and expenditures to expand and maintain our manufacturing facilities and research and development operations. We expect to continue to make significant expenditures related to our business, including expenditures for hiring additional research and development, and sales and marketing personnel, and expenditures to maintain and expand our manufacturing facilities and research and development operations. In addition, we have incurred significant additional time demands and legal, accounting and other expenses since we became a public company in September 2013. Our management and other personnel devote a substantial amount of time to complying with the applicable rules and requirements of being a public company.
Our financial results may vary significantly from quarter-to-quarter due to a number of factors, which may lead to volatility in our stock price.
Our quarterly revenue and operating results have varied in the past and will likely continue to vary significantly from quarter to quarter. This variability may lead to volatility in our stock price as research analysts and investors respond to these quarterly fluctuations. These fluctuations are due to numerous factors, including:
· | the timing, size and mix of sales of our products; |
· | fluctuations in demand for our products, including the increase, decrease, rescheduling or cancellation of significant customer orders; |
· | our ability to design, manufacture and deliver products which meet customer requirements in a timely and cost-effective manner; |
· | new product introductions and enhancements by us or our competitors; |
· | the gain or loss of key customers; |
· | the rate at which our present and potential customers and end users adopt our technologies; |
· | changes in our pricing and sales policies or the pricing and sales policies of our competitors; | |
· | quality control or yield problems in our manufacturing operations; |
· | supply disruption for certain raw materials and components used in our products; | |
· | capacity constraints of our outside contract manufacturers for a portion of the manufacturing process for some of our products; | |
· | length and variability of the sales cycles of our products; |
· | unanticipated increases in costs or expenses; |
· | the loss of key employees; |
· | different capital expenditure and budget cycles for our customers, affecting the timing of their spending for our products; |
17 |
· | political stability in the areas of the world in which we operate; |
· | fluctuations in foreign currency exchange rates; |
· | changes in accounting rules; |
· | the evolving and unpredictable nature of the markets for products incorporating our solutions; and |
· | general economic conditions and changes in such conditions specific to our target markets. |
The foregoing factors are difficult to forecast, and these, as well as other factors, could materially adversely affect our quarterly and annual operating results. In addition, a significant amount of our operating expenses is relatively fixed in nature due to our internal manufacturing, research and development, sales and general administrative efforts. Any failure to adjust spending quickly enough to compensate for a revenue shortfall could magnify the adverse impact of such revenue shortfall on our results of operations. For these reasons, you should not rely on quarter-to-quarter comparisons of our results of operations as an indicator of future performance. Moreover, our operating results may not meet our announced guidance or the expectations of research analysts or investors, in which case the price of our common stock could decrease significantly. There can be no assurance that we will be able to successfully address these risks.
We depend on key personnel to develop and maintain our technology and manage our business in a rapidly changing market.
The continued services of our executive officers and other key engineering, sales, marketing, manufacturing and support personnel is essential to our success. For example, our ability to achieve new design wins depends upon the experience and expertise of our engineers. Any of our key employees, including our Chief Executive Officer, Chief Financial Officer, Senior Vice President of Network Equipment Module Business Unit, Senior Vice President of Optical Module Division and Asia General Manager, may resign at any time. We do not have key person life insurance policies covering any of our employees. To implement our business plan, we also intend to hire additional employees, particularly in the areas of engineering, manufacturing and sales. Our ability to continue to attract and retain highly skilled employees is a critical factor in our success. Competition for highly skilled personnel is intense. We may not be successful in attracting, assimilating or retaining qualified personnel to satisfy our current or future needs. Our ability to develop, manufacture and sell our products, and thus our financial condition and results of operations, would be adversely affected if we are unable to retain existing personnel or hire additional qualified personnel.
We depend on a limited number of suppliers and any supply interruption could have an adverse effect on our business.
We depend on a limited number of suppliers for certain raw materials and components used in our products. Some of these suppliers could disrupt our business if they stop, decrease or delay shipments or if the materials or components they ship have quality or reliability issues. Some of the raw materials and components we use in our products are available only from a sole source or have been qualified only from a single supplier. Furthermore, other than our current suppliers, there are a limited number of entities from whom we could obtain certain materials and components. We may also face shortages if we experience increased demand for materials or components beyond what our qualified suppliers can deliver. Our inability to obtain sufficient quantities of critical materials or components could adversely affect our ability to meet demand for our products, adversely affecting our financial condition and results of operation.
We typically have not entered into long-term agreements with our suppliers and, therefore, our suppliers could stop supplying materials and components to us at any time or fail to supply adequate quantities of materials or components to us on a timely basis. It is difficult, costly, time consuming and, on short notice, sometimes impossible for us to identify and qualify new suppliers. Our customers generally restrict our ability to change the components in our products. For more critical components, any changes may require repeating the entire qualification process. Our reliance on a limited number of suppliers or a single qualified vendor may result in delivery and quality problems, and reduced control over product pricing, reliability and performance.
We depend upon outside contract manufacturers for a portion of the manufacturing process for some of our products.
Almost all of our products are manufactured internally. However we also rely upon manufacturers in China, Taiwan and other Asia locations to provide back-end manufacturing and produce the finished portion of a few of our products. Our reliance on a contract manufacturer for these products makes us vulnerable to possible capacity constraints and reduced control over delivery schedules, manufacturing yields, manufacturing quality/controls and costs. If one of our contract manufacturers is unable to meet all of our customer demand in a timely fashion, this could have a material adverse effect on the revenue from our products. If the contract manufacturer for one of our products was unable or unwilling to manufacture such product in required volumes and at high quality levels or to continue our existing supply arrangement, we would have to identify, qualify and select an acceptable alternative contract manufacturer or move these manufacturing operations to our internal manufacturing facilities. An alternative contract manufacturer may not be available to us when needed or may not be in a position to satisfy our quality or production requirements on commercially reasonable terms, including price. Any significant interruption in manufacturing our products would require us to reduce our supply of products to our customers, which in turn, would reduce our revenue, harm our relationships with the customer of these products and cause us to forego potential revenue opportunities.
18 |
Our products could contain defects that may cause us to incur significant costs or result in a loss of customers.
Our products are complex and undergo quality testing as well as formal qualification by our customers. Our customers’ testing procedures are limited to evaluating our products under likely and foreseeable failure scenarios and over varying amounts of time. For various reasons, such as the occurrence of performance problems that are unforeseeable in testing or that are detected only when products age or are operated under peak stress conditions, our products may fail to perform as expected long after customer acceptance. Failures could result from faulty components or design, problems in manufacturing or other unforeseen reasons. As a result, we could incur significant costs to repair or replace defective products under warranty, particularly when such failures occur in installed systems. Our products are typically embedded in, or deployed in conjunction with, our customers’ products, which incorporate a variety of components, modules and subsystems and may be expected to interoperate with modules produced by third parties. As a result, not all defects are immediately detectable and when problems occur, it may be difficult to identify the source of the problem. While we have not experienced material failures in the past, we will continue to face this risk going forward because our products are widely deployed in many demanding environments and applications worldwide. In addition, we may in certain circumstances honor warranty claims after the warranty has expired or for problems not covered by warranty to maintain customer relationships. Any significant product failure could result in litigation, damages, repair costs and lost future sales of the affected product and other products, divert the attention of our engineering personnel from our product development efforts and cause significant customer relations problems, all of which would harm our business. Although we carry product liability insurance, this insurance may not adequately cover our costs arising from defects in our products or otherwise.
We face a variety of risks associated with our international sales and operations.
We currently derive, and expect to continue to derive, a significant portion of our revenue from sales to international customers. In 2015, 2014 and 2013, 19.0%, 29.5% and 41.0% of our revenue was derived from sales that occurred outside of North America, respectively. In addition, a significant portion of our manufacturing operations is based in Ningbo, China and Taipei, Taiwan. Our international revenue and operations are subject to a number of material risks, including:
· | difficulties in staffing, managing and supporting operations in more than one country; |
· | difficulties in enforcing agreements and collecting receivables through foreign legal systems; |
· | fewer legal protections for intellectual property in foreign jurisdictions; |
· | foreign and U.S. taxation issues and international trade barriers; |
· | difficulties in obtaining any necessary governmental authorizations for the export of our products to certain foreign jurisdictions; |
· | fluctuations in foreign economies; |
· | fluctuations in the value of foreign currencies and interest rates; |
· | trade and travel restrictions; |
· | domestic and international economic or political changes, hostilities and other disruptions in regions where we currently operate or may operate in the future; |
· | difficulties and increased expenses in complying with a variety of U.S. and foreign laws, regulations and trade standards, including the Foreign Corrupt Practices Act; and |
· | different and changing legal and regulatory requirements in the jurisdictions in which we currently operate or may operate in the future. |
19 |
Negative developments in any of these factors in China or Taiwan or other countries could result in a reduction in demand for our products, the cancellation or delay of orders already placed, difficulties in producing and delivering our products, threats to our intellectual property, difficulty in collecting receivables, and a higher cost of doing business. Although we maintain certain compliance programs throughout the company, violations of U.S. and foreign laws and regulations may result in criminal or civil sanctions, including material monetary fines, penalties and other costs against us or our employees, and may have a material adverse effect on our business.
Our business operations conducted in China and Taiwan are important to our success. A substantial portion of our property, plant and equipment is located in China and Taiwan. We expect to make further investments in China and Taiwan in the future. Therefore, our business, financial condition, results of operations and prospects are subject to economic, political, legal, and social events and developments in China and Taiwan. Factors affecting military, political or economic conditions in China and Taiwan could have a material adverse effect on our financial condition and results of operations, as well as the market price and the liquidity of our common shares.
In some instances, we rely on third parties to assist in selling our products, and the failure of those parties to perform as expected could reduce our future revenue.
Although we primarily sell our products through direct sales, we also sell our products to some of our customers through third party sales representatives and distributors. Many of such third parties also market and sell products from our competitors. Our third party sales representatives and distributors may terminate their relationships with us at any time, or with short notice. Our future performance will also depend, in part, on our ability to attract additional third party sales representatives and distributors that will be able to market and support our products effectively, especially in markets in which we have not previously distributed our products. If our current third party sales representatives and distributors fail to perform as expected, our revenue and results of operations could be harmed.
Failure to manage our growth effectively may adversely affect our financial condition and results of operations.
Successful implementation of our business plan in our target markets requires effective planning and management. Our production volumes are increasing significantly and we have announced plans to increase our production capacity in response to demand for our products, adding both personnel as well as expanding our physical manufacturing facilities. We currently operate facilities in Sugar Land, Texas, Ningbo, China, Taipei, Taiwan, and Duluth, Georgia. We currently manufacture our lasers using a proprietary process and customized equipment located only in our Sugar Land, Texas facility, and it will be costly to duplicate that facility, to scale our laser manufacturing capacity or to mitigate the risks associated with operating a single facility. The challenges of managing our geographically dispersed operations have increased and will continue to increase the demand on our management systems and resources. Moreover, we are continuing to improve our financial and managerial controls, reporting systems and procedures. Any failure to manage our expansion and the resulting demands on our management systems and resources effectively may adversely affect our financial condition and results of operations.
Our loan agreements contain restrictive covenants that may adversely affect our ability to conduct our business.
We have lending arrangements with several financial institutions, including loan agreements with East West Bank and Comerica Bank in the U.S., and our Taiwan location and China subsidiary have several lines of credit arrangements. Our loan agreements governing our long-term debt obligations in the U.S. contain certain financial and operating covenants that limit our management’s discretion with respect to certain business matters. Among other things, these covenants require us to maintain certain financial ratios and restrict our ability to incur additional debt, create liens or other encumbrances, change the nature of our business, pay dividends, sell or otherwise dispose of assets and merge or consolidate with other entities. These restrictions may limit our flexibility in responding to business opportunities, competitive developments and adverse economic or industry conditions. Any failure by us or our subsidiaries to comply with these agreements could harm our business, financial condition and operating results. In addition, our obligations under our loan agreements with East West Bank and Comerica Bank are secured by substantially all of our U.S. assets. A breach of any of covenants under our loan agreements, or a failure to pay interest or indebtedness when due under any of our credit facilities, could result in a variety of adverse consequences, including the acceleration of our indebtedness.
20 |
We may not be able to obtain additional capital when desired, on favorable terms or at all.
We operate in a market that makes our prospects difficult to evaluate and, to remain competitive, we will be required to make continued investments in capital equipment, facilities and technological improvements. We expect that substantial capital will be required to expand our manufacturing capacity and fund working capital for anticipated growth. If we do not generate sufficient cash flow from operations or otherwise have the capital resources to meet our future capital needs, we may need additional financing to implement our business strategy, which includes:
· | expansion of research and development; | |
· | expansion of manufacturing capabilities; | |
· | hiring of additional technical, sales and other personnel; and | |
· | acquisitions of complementary businesses. |
If we raise additional funds through the issuance of our common stock or convertible securities, the ownership interests of our stockholders could be significantly diluted. These newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. Additional financing may not, however, be available on terms favorable to us, or at all, if and when needed, and our ability to fund our operations, take advantage of unanticipated opportunities, develop or enhance our infrastructure or respond to competitive pressures could be significantly limited. If we cannot raise required capital when needed, we may be unable to meet the demands of existing and prospective customers, adversely affecting our sales and market opportunities and consequently our business, financial condition and results of operations.
Future acquisitions may adversely affect our financial condition and results of operations.
As part of our business strategy, we may pursue acquisitions of companies that we believe could enhance or complement our current product portfolio, augment our technology roadmap or diversify our revenue base. Acquisitions involve numerous risks, any of which could harm our business, including:
· | difficulties integrating the acquired business; | |
· | unanticipated costs, capital expenditures or liabilities or changes related to research in progress and product development; | |
· | diversion of financial and management resources from our existing business; | |
· | difficulties integrating the business relationships with suppliers and customers of the acquired business with our existing business relationships; | |
· | risks associated with entering markets in which we have little or no prior experience; and | |
· | potential loss of key employees, particularly those of the acquired organizations. |
Acquisitions may also result in the recording of goodwill and other intangible assets subject to potential impairment in the future, adversely affecting our operating results. We may not achieve the anticipated benefits of an acquisition if we fail to evaluate it properly, and we may incur costs in excess of what we anticipate. A failure to evaluate and execute an acquisition appropriately or otherwise adequately address these risks may adversely affect our financial condition and results of operations.
We may be subject to disruptions or failures in information technology systems and network infrastructures that could have a material adverse effect on our business and financial condition.
We rely on the efficient and uninterrupted operation of complex information technology systems and network infrastructures to operate our business. A disruption, infiltration or failure of our information technology systems as a result of software or hardware malfunctions, system implementations or upgrades, computer viruses, third-party security breaches, employee error, theft or misuse, malfeasance, power disruptions, natural disasters or accidents could cause a breach of data security, loss of intellectual property and critical data and the release and misappropriation of sensitive competitive information and partner, customer, and employee personal data. Any of these events could harm our competitive position, result in a loss of customer confidence, cause us to incur significant costs to remedy any damages and ultimately materially adversely affect our business and financial condition.
Our future results of operations may be subject to volatility as a result of exposure to fluctuations in currency exchange rates.
We have significant foreign currency exposure, and are affected by fluctuations among the U.S. dollar, the Chinese renminbi, or RMB, and the New Taiwan dollar, or NT dollar, because a substantial portion of our business is conducted in China and Taiwan. Our sales, raw materials, components and capital expenditures are denominated in U.S. dollars, RMB and NT dollars in varying amounts.
Foreign currency fluctuations may adversely affect our revenue and our costs and expenses, and hence our results of operations. The value of the NT dollar or the RMB against the U.S. dollar and other currencies may fluctuate and be affected by, among other things, changes in political and economic conditions. The RMB currency is no longer being pegged solely to the value of the U.S. dollar. In the long term, the RMB may appreciate or depreciate significantly in value against the U.S. dollar, depending upon the fluctuation of the basket of currencies against which it is currently valued, or it may be permitted to enter into a full float, which may also result in a significant appreciation or depreciation of the RMB against the U.S. dollar. In addition, our currency exchange variations may be magnified by Chinese exchange control regulations that restrict our ability to convert RMB into foreign currency.
21 |
Our sales in Europe are denominated in U.S. dollars and fluctuations in the Euro or our customers’ other local currencies relative to the U.S. dollar may impact our customers and affect our financial performance. If our customers’ local currencies weaken against the U.S. dollar, we may need to lower our prices to remain competitive in our international markets which could have a material adverse effect on our margins. If our customers’ local currencies strengthen against the U.S. dollar and if the local sales prices cannot be raised due to competitive pressures, we will experience a deterioration of our margins.
To date, we have not entered into any hedging transactions in an effort to reduce our exposure to foreign currency exchange risk. While we may decide to enter into hedging transactions in the future, the availability and effectiveness of these hedging transactions may be limited and we may not be able to successfully hedge our exposure.
Natural disasters or other catastrophic events could harm our operations.
Our operations in the U.S., China and Taiwan could be subject to significant risk of natural disasters, including earthquakes, hurricanes, typhoons, flooding and tornadoes, as well as other catastrophic events, such as epidemics, terrorist attacks or wars. For example, our corporate headquarters and wafer fabrication facility in Sugar Land, Texas, is located near the Gulf of Mexico, an area that is susceptible to hurricanes. We use a proprietary MBE laser manufacturing process that requires customized equipment, and this process is currently conducted and located solely at our wafer fabrication facility in Sugar Land, Texas, such that a natural disaster, terrorist attack or other catastrophic event that affects that facility would materially harm our operations. In addition, our manufacturing facility in Taipei, Taiwan, is susceptible to typhoons and earthquakes, and our manufacturing facility in Ningbo, China, has from time to time, suffered electrical outages. Any disruption in our manufacturing facilities arising from these and other natural disasters or other catastrophic events could cause significant delays in the production or shipment of our products until we are able to shift production to different facilities or arrange for third parties to manufacture our products. We may not be able to obtain alternate capacity on favorable terms or at all. Our property insurance coverage with respect to natural disaster is limited and is subject to deductible and coverage limits. Such coverage may not be adequate or continue to be available at commercially reasonable rates and terms. The occurrence of any of these circumstances may adversely affect our financial condition and results of operation.
If we fail to protect, or incur significant costs in defending, our intellectual property and other proprietary rights, our business and results of operations could be materially harmed.
Our success depends on our ability to protect our intellectual property and other proprietary rights. We rely on a combination of patent, trademark, copyright, trade secret and unfair competition laws, as well as license agreements and other contractual provisions, to establish and protect our intellectual property and other proprietary rights. We have applied for patent registrations in the U.S. and in other foreign countries, some of which have been issued. In addition, we have registered certain trademarks in the U.S. We cannot guarantee that our pending applications will be approved by the applicable governmental authorities. Moreover, our existing and future patents and trademarks may not be sufficiently broad to protect our proprietary rights or may be held invalid or unenforceable in court. A failure to obtain patents or trademark registrations or a successful challenge to our registrations in the U.S. or other foreign countries may limit our ability to protect the intellectual property rights that these applications and registrations intended to cover.
Policing unauthorized use of our technology is difficult and we cannot be certain that the steps we have taken will prevent the misappropriation, unauthorized use or other infringement of our intellectual property rights. Further, we may not be able to effectively protect our intellectual property rights from misappropriation or other infringement in foreign countries where we have not applied for patent protections, and where effective patent, trademark, trade secret and other intellectual property laws may be unavailable, or may not protect our proprietary rights as fully as U.S. law. We may seek to secure comparable intellectual property protections in other countries. However, the level of protection afforded by patent and other laws in other countries may not be comparable to that afforded in the U.S.
We also attempt to protect our intellectual property, including our trade secrets and know-how, through the use of trade secret and other intellectual property laws, and contractual provisions. We enter into confidentiality and invention assignment agreements with our employees and independent consultants. We also use non-disclosure agreements with other third parties who may have access to our proprietary technologies and information. Such measures, however, provide only limited protection, and there can be no assurance that our confidentiality and non-disclosure agreements will not be breached, especially after our employees end their employment, and that our trade secrets will not otherwise become known by competitors or that we will have adequate remedies in the event of unauthorized use or disclosure of proprietary information. Unauthorized third parties may try to copy or reverse engineer our products or portions of our products, otherwise obtain and use our intellectual property, or may independently develop similar or equivalent trade secrets or know-how. If we fail to protect our intellectual property and other proprietary rights, or if such intellectual property and proprietary rights are infringed or misappropriated, our business, results of operations or financial condition could be materially harmed.
22 |
In the future, we may need to take legal actions to prevent third parties from infringing upon or misappropriating our intellectual property or from otherwise gaining access to our technology. Protecting and enforcing our intellectual property rights and determining their validity and scope could result in significant litigation costs and require significant time and attention from our technical and management personnel, which could significantly harm our business. We may not prevail in such proceedings, and an adverse outcome may adversely impact our competitive advantage or otherwise harm our financial condition and our business.
We may be involved in intellectual property disputes in the future, which could divert management’s attention, cause us to incur significant costs and prevent us from selling or using the challenged technology.
Participants in the markets in which we sell our products have experienced frequent litigation regarding patent and other intellectual property rights. While we have a policy in place that is designed to reduce the risk of infringement of intellectual property rights of others and we have conducted a limited review of other companies’ relevant patents, there can be no assurance that third parties will not assert infringement claims against us. We cannot be certain that our products would not be found infringing on the intellectual property rights of others. Regardless of their merit, responding to such claims can be time consuming, divert management’s attention and resources and may cause us to incur significant expenses. Intellectual property claims against us could force us to do one or more of the following:
· | obtain from a third party claiming infringement a license to the relevant technology, which may not be available on reasonable terms, or at all; | |
· | stop manufacturing, selling, incorporating or using our products that use the challenged intellectual property; | |
· | pay substantial monetary damages; or | |
· | expend significant resources to redesign the products that use the technology and to develop non-infringing technology. |
Any of these actions could result in a substantial reduction in our revenue and could result in losses over an extended period of time.
In any potential intellectual property dispute, our customers could also become the target of litigation. Because we often indemnify our customers for intellectual property claims made against them with respect to our products, any claims against our customers could trigger indemnification claims against us. These obligations could result in substantial expenses such as legal expenses, damages for past infringement or royalties for future use. Any indemnity claim could also adversely affect our relationships with our customers and result in substantial costs to us.
If we fail to obtain the right to use the intellectual property rights of others that are necessary to operate our business, and to protect their intellectual property, our business and results of operations will be adversely affected.
From time to time we may choose to or be required to license technology or intellectual property from third parties in connection with the development of our products. We cannot assure you that third party licenses will be available to us on commercially reasonable terms, if at all. Generally, a license, if granted, would include payments of up-front fees, ongoing royalties or both. These payments or other terms could have a significant adverse impact on our results of operations. Our inability to obtain a necessary third party license required for our product offerings or to develop new products and product enhancements could require us to substitute technology of lower quality or performance standards, or of greater cost, either of which could adversely affect our business. If we are not able to obtain licenses from third parties, if necessary, then we may also be subject to litigation to defend against infringement claims from these third parties. Our competitors may be able to obtain licenses or cross-license their technology on better terms than we can, which could put us at a competitive disadvantage.
If we fail to maintain effective internal control over financial reporting in the future, the accuracy and timing of our financial reporting may be adversely affected.
Preparing our consolidated financial statements involves a number of complex manual and automated processes, which are dependent upon individual data input or review and require significant management judgment. One or more of these elements may result in errors that may not be detected and could result in a material misstatement of our consolidated financial statements. The Sarbanes-Oxley Act requires, among other things, that as a publicly-traded company we disclose whether our internal control over financial reporting and disclosure controls and procedures are effective. In addition, for so long as we qualify as an “emerging growth company” under the JOBS Act, which may be up to five years following our initial public offering in September 2013, we will not have to provide an auditor’s attestation report on our internal controls in future annual reports on Form 10-K as otherwise required by Section 404(b) of the Sarbanes-Oxley Act. During the course of any evaluation, documentation or attestation, we or our independent registered public accounting firm may identify weaknesses and deficiencies that we may not otherwise identify in a timely manner or at all as a result of the deferred implementation of this additional level of review.
23 |
We have implemented internal controls that we believe provide reasonable assurance that we will be able to avoid accounting errors or material weaknesses in future periods. However, our internal controls cannot guarantee that no accounting errors exist or that all accounting errors, no matter how immaterial, will be detected because a control system, no matter how well designed and operated, can provide only reasonable, but not absolute assurance that the control system’s objectives will be met. If we are unable to implement and maintain effective internal control over financial reporting, our ability to accurately and timely report our financial results could be adversely impacted. This could result in late filings of our annual and quarterly reports under the Securities Exchange Act of 1934, or the Exchange Act, restatements of our consolidated financial statements, a decline in our stock price, suspension or delisting of our common stock by NASDAQ, or other material adverse effects on our business, reputation, results of operations or financial condition.
Our ability to use our net operating losses and certain other tax attributes may be limited.
As of December 31, 2015, we had U.S. accumulated net operating losses, or NOLs, of approximately $50.3 million for U.S. federal income tax purposes. Under Section 382 of the Internal Revenue Code of 1986, as amended, if a corporation undergoes an “ownership change,” the corporation’s ability to use its pre-change NOLs, R&D credits and other pre-change tax attributes to offset its post-change income may be limited. An ownership change is generally defined as a greater than 50% change in equity ownership by value over a 3-year period. Based upon an analysis of our equity ownership, we have experienced an ownership change and our NOL is limited in dollar amount. The amount of NOL available each year may decrease by the amount of NOL utilized and may increase by the amount of any operating losses incurred. Should we experience additional ownership changes, our NOL carry forwards may be further limited.
Changes in our effective tax rate may adversely affect our results of operation and our business.
We are subject to income taxes in the U.S. and other foreign jurisdictions, including China. We base our tax position on the anticipated nature and conduct of our business and our understanding of the tax laws of the countries in which we have assets or conduct activities. Our tax position may be reviewed or challenged by tax authorities. Moreover, the tax laws currently in effect may change, and such changes may have retroactive effect. We have inter-company arrangements in place providing for administrative and financing services and transfer pricing, which involve a significant degree of judgment and are often subject to close review by tax authorities. The tax authorities may challenge our positions related to these agreements. If the tax authorities successfully challenge our positions, our effective tax rate may increase, adversely affecting our results of operation and our business.
Our manufacturing operations are subject to environmental regulation that could limit our growth or impose substantial costs, adversely affecting our financial condition and results of operations.
Our properties, operations and products are subject to the environmental laws and regulations of the jurisdictions in which we operate and sell products. These laws and regulations govern, among other things, air emissions, wastewater discharges, the management and disposal of hazardous materials, the contamination of soil and groundwater, employee health and safety and the content, performance, packaging and disposal of products. Our failure to comply with current and future environmental laws and regulations, or the identification of contamination for which we are liable, could subject us to substantial costs, including fines, clean-up costs, third-party property damages or personal injury claims, and make significant investments to upgrade our facilities or curtail our operations. Liability under environmental, health and safety laws can be joint and several and without regard to fault or negligence. For example, pursuant to environmental laws and regulations, including but not limited to the Comprehensive Environmental Response Compensation and Liability Act, or CERCLA, we may be liable for the full amount of any remediation-related costs at properties we currently own or formerly owned, such as our currently owned Sugar Land, Texas facility, or at properties at which we operated, as well as at properties we will own or operate in the future, and properties to which we have sent hazardous substances, whether or not we caused the contamination. Identification of presently unidentified environmental conditions, more vigorous enforcement by a governmental authority, enactment of more stringent legal requirements or other unanticipated events could give rise to adverse publicity, restrict our operations, affect the design or marketability of our products or otherwise cause us to incur material environmental costs, adversely affecting our financial condition and results of operations.
We are exposed to risks and increased expenses and business risk as a result of Restriction on Hazardous Substances, or RoHS directives.
Following the lead of the European Union, or EU, various governmental agencies have either already put into place or are planning to introduce regulations that regulate the permissible levels of hazardous substances in products sold in various regions of the world. For example, the RoHS directive for EU took effect on July 1, 2006. The labeling provisions of similar legislation in China went into effect on March 1, 2007. Consequently, many suppliers of products sold into the EU have required their suppliers to be compliant with the new directive. Many of our customers have adopted this approach and have required our full compliance. Though we have devoted a significant amount of resources and effort in planning and executing our RoHS program, it is possible that some of our products might be incompatible with such regulations. In such events, we could experience the following consequences: loss of revenue, damages reputation, diversion of resources, monetary penalties, and legal action.
24 |
Failure to comply with the U.S. Foreign Corrupt Practices Act could subject us to penalties and other adverse consequences.
We are subject to the U.S. Foreign Corrupt Practices Act which generally prohibits U.S. companies from engaging in bribery or other prohibited payments to foreign officials for the purpose of obtaining or retaining business. In addition, we are required to maintain records that accurately and fairly represent our transactions and have an adequate system of internal accounting controls. Foreign companies, including some that may compete with us, may not be subject to these prohibitions, and therefore may have a competitive advantage over us. If we are not successful in implementing and maintaining adequate preventative measures, we may be responsible for acts of our employees or other agents engaging in such conduct. We could suffer severe penalties and other consequences that may have a material adverse effect on our financial condition and results of operations.
We are subject to governmental export and import controls that could subject us to liability or impair our ability to compete in international markets.
We are subject to export and import control laws, trade regulations and other trade requirements that limit which products we sell and where and to whom we sell our products. Specifically, the Bureau of Industry and Security of the U.S. Department of Commerce is responsible for regulating the export of most commercial items that are so called dual-use goods that may have both commercial and military applications. A limited number of our products are exported by license under the Export Control Classification Number, or ECCN, of 5A991. Export Control Classification requirements are dependent upon an item’s technical characteristics, the destination, the end-use, and the end-user, and other activities of the end-user. Should the regulations applicable to our products change, or the restrictions applicable to countries to which we ship our products change, then the export of our products to such countries could be restricted. As a result, our ability to export or sell our products to certain countries could be restricted, which could adversely affect our business, financial condition and results of operations. Changes in our products or any change in export or import regulations or related legislation, shift in approach to the enforcement or scope of existing regulations, or change in the countries, persons or technologies targeted by such regulations, could result in delayed or decreased sales of our products to existing or potential customers. In such event, our business and results of operations could be adversely affected.
Rapidly changing standards and regulations could make our products obsolete, which would cause our revenue and results of operations to suffer.
We design our products to conform to regulations established by governments and to standards set by industry standards bodies worldwide, such as the American National Standards Institute, the European Telecommunications Standards Institute, the International Telecommunications Union and the Institute of Electrical and Electronics Engineers, Inc. Various industry organizations are currently considering whether and to what extent to create standards applicable to our products. Because certain of our products are designed to conform to current specific industry standards, if competing or new standards emerge that are preferred by our customers, we would have to make significant expenditures to develop new products. If our customers adopt new or competing industry standards with which our products are not compatible, or the industry groups adopt standards or governments issue regulations with which our products are not compatible, our existing products would become less desirable to our customers and our revenue and results of operations would suffer.
Compliance with regulations related to conflict minerals could increase costs and affect the manufacturing and sale of our products.
Public companies are required to disclose the use of tin, tantalum, tungsten and gold (collectively, “conflict minerals”) mined from the Democratic Republic of the Congo and adjoining countries (the “covered countries”) if a conflict mineral(s) is necessary to the functionality of a product manufactured, or contracted to be manufactured, by the company. We may determine, as part of our compliance efforts, that certain products or components we obtain from our suppliers contain conflict minerals. If we are unable to conclude that all our products are free from conflict minerals originating from covered countries, this could have a negative impact on our business, reputation and/or results of operations. We may also encounter challenges to satisfy customers who require that our products be certified as conflict free, which could place us at a competitive disadvantage if we are unable to substantiate such a claim. Compliance with these rules could also affect the sourcing and availability of some of the minerals used in the manufacture of products or components we obtain from our suppliers, including our ability to obtain products or components in sufficient quantities and/or at competitive prices. Certain of our customers are requiring additional information from us regarding the origin of our raw materials, and complying with these customer requirements may cause us to incur additional costs, such as costs related to determining the origin of any minerals used in our products. Our supply chain is complex and we may be unable to verify the origins for all metals used in our products. We may also encounter challenges with our customers and stockholders if we are unable to certify that our products are conflict free.
25 |
Risks Related to Our Operations in China
Our business operations conducted in China are critical to our success. A total of $20.6 million, $22.0 million and $31.9 million or 11% 16.9% and 40.6%, of our revenue in the years ended December 31, 2015, 2014 and 2013 was attributable to our product manufacturing plants in China, respectively. Additionally, a substantial portion of our property, plant and equipment, 22% and 26% as of December 31, 2015 and 2014, was located in China, respectively. We expect to make further investments in China in the foreseeable future. Therefore, our business, financial condition, results of operations and prospects are to a significant degree subject to economic, political, legal, and social events and developments in China.
Adverse changes in economic and political policies in China, or Chinese laws or regulations could have a material adverse effect on business conditions and the overall economic growth of China, which could adversely affect our business.
The Chinese economy differs from the economies of most developed countries in many respects, including the level of government involvement, level of development, growth rate, control of foreign exchange and allocation of resources. The Chinese economy has been transitioning from a planned economy to a more market-oriented economy. Despite reforms, the government continues to exercise significant control over China’s economic growth by way of the allocation of resources, control over foreign currency-denominated obligations and monetary policy and provision of preferential treatment to particular industries or companies.
In addition, the laws, regulations and legal requirements in China, including the laws that apply to foreign-invested enterprises, or FIEs, are subject to frequent changes. The interpretation and enforcement of such laws is uncertain. Protections of intellectual property rights and confidentiality in China may not be as effective as in the U.S. or other countries or regions with more developed legal systems. Any litigation in China may be protracted and result in substantial costs and diversion of resources and management attention. Any adverse changes to these laws, regulations and legal requirements or their interpretation or enforcement could have a material adverse effect on our business.
Furthermore, while China’s economy has experienced rapid growth in the past 20 years, growth has been uneven across different regions, among various economic sectors and over time. China has also in the past and may in the future experience economic downturns due to, for example, government austerity measures, changes in government policies relating to capital spending, limitations placed on the ability of commercial banks to make loans, reduced levels of exports and international trade, inflation, lack of financial liquidity, stock market volatility and global economic conditions. Any of these developments could contribute to a decline in business and consumer spending in addition to other adverse market conditions, which could adversely affect our business.
The termination and expiration or unavailability of our preferential tax treatments in China may have a material adverse effect on our operating results.
Prior to January 1, 2008, entities established in China were generally subject to a 30% state and 3% local enterprise income tax rate. In accordance with the China Income Tax Law for Enterprises with Foreign Investment and Foreign Enterprises, effective through December 31, 2007, our China subsidiary enjoyed preferential income tax rates. Effective January 1, 2008, the China Enterprise Income Tax Law, or the EIT law, imposes a single uniform income tax rate of 25% on all Chinese enterprises, including FIEs, and eliminates or modifies most of the tax exemptions, reductions and preferential treatment available under the previous tax laws and regulations. As a result, our China subsidiary may be subject to the uniform income tax rate of 25% unless we are able to qualify for preferential status. Currently, we have qualified for a preferential 15% tax rate that is available for state-encouraged new high technology enterprises. The preferential rate has applied to calendar years 2015, 2014, 2013 and 2012. We have not yet realized any benefit from the 10% reduction in income tax rate due to losses incurred by our China subsidiary; however, if we fail to continue to qualify for this preferential rate in the future, we may incur higher tax rates on our income in China. In order to retain the preferential tax rate, we must meet certain operating conditions, satisfy certain product requirements, meet certain headcount requirements and maintain certain levels of research expenditures. We applied for an additional three years of preferential status with the Chinese government in 2014 and received approval as a high-technology enterprise through September 2017. Any future increase in the enterprise income tax rate applicable to us or the expiration or other limitation of preferential tax rates available to us could increase our tax liabilities and reduce our net income.
China regulation of loans to and direct investment by offshore holding companies in China entities may delay or prevent us from making loans or additional capital contributions to our China subsidiary.
Any loans that we wish to make to our China subsidiary are subject to China regulations and approvals. For example, any loans to our China subsidiary to finance their activities cannot exceed statutory limits, must be registered with State Administration of Foreign Exchange, or SAFE, or its local counterpart, and must be approved by the relevant government authorities. Any capital contributions to our China subsidiary must be approved by the Ministry of Commerce or its local counterpart. In addition, under Circular 142, our China subsidiary, as a FIE, may not be able to convert our capital contributions to them into RMB for equity investments or acquisitions in China.
26 |
We cannot assure you that we will be able to obtain these government registrations or approvals on a timely basis, if at all, with respect to our future loans or capital contributions to our China subsidiary. If we fail to receive such registrations or approvals, our ability to capitalize our China subsidiary may be negatively affected, which could materially and adversely affect our liquidity and ability to fund and expand our business.
Our China subsidiary is subject to Chinese labor laws and regulations and Chinese labor laws may increase our operating costs in China.
The China Labor Contract Law, together with its implementing rules, provides increased rights to Chinese employees. Previously, an employer had discretionary power in deciding the probation period, not to exceed six months. Additionally, the employment contract could only be terminated for cause. Under these rules, the probation period varies depending on contract terms and the employment contract can only be terminated during the probation period for cause upon three days’ notice. Additionally, an employer may not be able to terminate a contract during the probation period on the grounds of a material change of circumstances or a mass layoff. The law also has specific provisions on conditions when an employer has to sign an employment contract with open-ended terms. If an employer fails to enter into an open-ended contract in certain circumstances, the employer must pay the employee twice their monthly wage beginning from the time the employer should have executed an open-ended contract. Additionally an employer must pay severance for nearly all terminations, including when an employer decides not to renew a fixed-term contract. These laws may increase our costs and reduce our flexibility.
The turnover of direct labor in manufacturing industries in China is high, which could adversely affect our production, shipments and results of operations.
Employee turnover of direct labor in the manufacturing sector in China is high and retention of such personnel is a challenge to companies located in or with operations in China. Although direct labor costs do not represent a high proportion of our overall manufacturing costs, direct labor is required for the manufacture of our products. If our direct labor turnover rates are higher than we expect, or we otherwise fail to adequately manage our direct labor turnover rates, then our results of operations could be adversely affected.
An increase in our labor costs in China may adversely affect our business and our profitability.
A significant portion of our workforce is located in China. Labor costs in China have been increasing recently due to labor unrest, strikes and changes in employment laws. If labor costs in China continue to increase, our costs will increase. If we are not able to pass these increases on to our customers, our business, profitability and results of operations may be adversely affected.
We may have difficulty establishing and maintaining adequate management and financial controls over our China operations.
Businesses in China have historically not adopted a western style of management and financial reporting concepts and practices, which includes strong corporate governance, internal controls and computer, financial and other control systems. Moreover, familiarity with U.S. GAAP principles and reporting procedures is less common in China. As a consequence, we may have difficulty finding accounting personnel experienced with U.S. GAAP, and we may have difficulty training and integrating our China-based accounting staff with our U.S.-based finance organization. As a result of these factors, we may experience difficulty in establishing management and financial controls over our China operations. These difficulties include collecting financial data and preparing financial statements, books of account and corporate records and instituting business practices that meet U.S. public-company reporting requirements. We may, in turn, experience difficulties in implementing and maintaining adequate internal controls as required under Section 404 of the Sarbanes-Oxley Act.
Risks Related to Our Common Stock
Our stock price has been and is likely to be volatile.
The market price of our common stock has been and is likely to be subject to wide fluctuations in response to, among other things, the risk factors described in this section of this Annual Report on Form 10-K, and other factors beyond our control, such as fluctuations in the valuation of companies perceived by investors to be comparable to us.
Furthermore, the stock markets have experienced price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. These fluctuations often have been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political and market conditions, such as recessions, interest rate changes or international currency fluctuations, may negatively affect the market price of our common stock.
27 |
In the past, many companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may become the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.
We have incurred and will continue to incur significant increased expenses and administrative burdens as a public company, which could have a material adverse effect on our operations and financial results.
We face increased legal, accounting, administrative and other costs and expenses as a public company that we did not incur as a private company, and greater expenditures may be necessary in the future with the advent of new laws, regulations and stock exchange listing requirements pertaining to public companies. These increased costs will require us to divert a significant amount of money that we could otherwise use to expand our business and achieve our strategic objectives. The Sarbanes-Oxley Act, including the requirements of Section 404, as well as rules and regulations subsequently implemented by the SEC, the Public Company Accounting Oversight Board and the NASDAQ Global Market, impose additional reporting and other obligations on public companies. Compliance with public company requirements has increased our costs and made some activities more time-consuming. For example, we have created board committees and adopted internal controls and disclosure controls and procedures. In addition, we will have incurred and will continue to incur additional expenses associated with our SEC reporting requirements. Furthermore, if we identify any issues in complying with those requirements (for example, if we or our auditors identify a material weakness or significant deficiency in our internal control over financial reporting), we could incur additional costs rectifying those issues, and the existence of those issues could adversely affect us, our reputation or investor perceptions of us. Advocacy efforts by stockholders and third parties may also prompt additional changes in governance and reporting requirements, which could further increase our costs.
We currently do not intend to pay dividends on our common stock and, consequently, your only opportunity to achieve a return on your investment is if the price of our common stock appreciates.
We currently do not plan to declare or pay dividends on shares of our common stock in the foreseeable future. In addition, the terms of our loan and security agreement with East West Bank and Comerica Bank restrict our ability to pay dividends. Consequently, your only opportunity to achieve a return on any shares of our common stock that you may acquire will be if the market price of our common stock appreciates and you sell your shares at a profit. There is no guarantee that the price of our common stock in the market will ever exceed the price that you pay.
Our charter documents, stock incentive plans and Delaware law could prevent a takeover that stockholders consider favorable and could also reduce the market price of our stock.
Our amended and restated certificate of incorporation and our amended and restated bylaws and our stock incentive plans contain provisions that could delay or prevent a change in control of our company. These provisions could also make it more difficult for stockholders to elect directors and take other corporate actions. These provisions include:
· | providing for a classified board of directors with staggered, three-year terms; |
· | not providing for cumulative voting in the election of directors; | |
· | authorizing our board of directors to issue, without stockholder approval, preferred stock rights senior to those of common stock; |
· | prohibiting stockholder action by written consent; |
· | limiting the persons who may call special meetings of stockholders; |
· | requiring advance notification of stockholder nominations and proposals; and |
· | change of control provisions in our stock incentive plans, and the individual stock option agreements, which provide that a change of control may accelerate the vesting of the stock options issued under such plans. |
28 |
In addition, we are governed by the provisions of Section 203 of the Delaware General Corporate Law. These provisions may prohibit large stockholders, in particular those owning 15% or more of our outstanding common stock, from engaging in certain business combinations without the approval of substantially all of our stockholders for a certain period of time.
These and other provisions in our amended and restated certificate of incorporation, our amended and restated bylaws and under Delaware law could discourage potential takeover attempts, reduce the price that investors might be willing to pay for shares of our common stock in the future and result in the market price being lower than it would be without these provisions.
Some provisions of our named executive officers’ agreements regarding change of control or separation of service contain obligations for us to make separation payments to them upon their termination.
Certain provisions contained in our employment agreements with our named executive officers regarding change of control or separation of service may obligate us to make lump sum severance payments and related payments upon the termination of their employment with us, other than such executive officer’s resignation without good reason or our termination of their employment as a result of their disability or for cause. In the event we are required to make these separation payments, it could have a material adverse effect on our results of operations for the fiscal period in which such payments are made.
If research analysts do not publish research about our business or if they issue unfavorable commentary or downgrade our common stock, our stock price and trading volume could decline.
The trading market for our common stock will depend on the research and reports that research analysts publish about us and our business. The price of our common stock could decline if one or more research analysts downgrade our common stock or if those analysts issue other unfavorable commentary or cease publishing reports about us or our business. If one or more of the research analysts ceases coverage of our company or fails to publish reports on us regularly, demand for our stock could decrease, which could cause our stock price or trading volume to decline.
As an “emerging growth company” within the meaning of the Securities Act, we will utilize certain modified disclosure requirements, and we cannot be certain if these reduced requirements will make our common stock less attractive to investors.
We are an emerging growth company within the meaning of the rules under the Securities Act. We have in this Annual Report on Form 10-K utilized, and we plan in future filings with the SEC to continue to utilize, the modified disclosure requirements available to emerging growth companies, including reduced disclosure about our executive compensation and omission of compensation discussion and analysis, and an exemption from the requirement of holding a nonbinding advisory vote on executive compensation and an exemption from the requirement that outside auditors attest as to our internal control over financial reporting. As a result, our stockholders may not have access to certain information they may deem important.
In addition, Section 107 of the JOBS Act also provides that an emerging growth company can utilize the extended transition period provided in Section 7(a)(2)(B) of the Securities Act for complying with new or revised accounting standards. Thus, an emerging growth company can delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We have elected to utilize this extended transition period. Our financial statements may therefore not be comparable to those of companies that comply with such new or revised accounting standards as they become applicable to public companies.
We cannot predict if investors will find our common stock less attractive because we will rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile. We could remain an “emerging growth company” for up to five years, or until the earliest of (i) the last day of the first fiscal year in which our annual gross revenue exceed $1 billion, (ii) the date that we become a “large accelerated filer” as defined in Rule 12b-2 under the Exchange Act, which would occur if the market value of our common stock that is held by non-affiliates exceeds $700 million as of the last business day of our most recently completed second fiscal quarter or (iii) the date on which we have issued more than $1 billion in non-convertible debt during the preceding three-year period.
Item 1B. | Unresolved Staff Comments |
Not Applicable. |
29 |
Item 2. | Properties |
We maintain manufacturing, research and development, sales and administrative offices in the U.S., China and Taiwan. Our corporate headquarters is located at our facility in Sugar Land, Texas. The table below provides information regarding our facilities.
Location | Owned or Lease Expiration Date | Approximate Square Footage | Use | |||||
Sugar Land, Texas | Owned (1) | 139,450 | Administration, sales, manufacturing, research and development | |||||
Sugar Land, Texas | June 30, 2016 (5) | 7,066 | Research and development | |||||
Lawrenceville, Georgia | February 29, 2016 (2) | 386 | Research and development | |||||
Duluth, Georgia | November 30, 2018 (2) | 2,983 | Research and development | |||||
Ningbo, China | Owned (3) | 458,849 | Administration, sales, manufacturing, research and development | |||||
Taipei, Taiwan | May 31, 2029 (4) | 268,797 | Administration, sales, manufacturing, research and development |
____________
(1) | The property is subject to a mortgage in favor of East West Bank and Comerica bank, securing our long-term debt obligations. Construction began in January 2015 on new facilities to expand our laser fabrication facilities and office space in Sugar Land, Texas. These facilities add 115,600 square feet of additional space to our original facility. We expect to fully occupy these new facilities by April 2016. |
(2) | We opened a new research and development office in November 2015 and moved from our temporary location in Lawrenceville, Georgia to the office in Duluth, Georgia at the end of February 2016. |
(3) | Our China subsidiary acquired the land use rights to the real property on which our new facility is located from the Chinese government. The land use rights expire on October 7, 2054. Our China subsidiary owns the facility located on the property. |
(4) | Our Taiwan subsidiary relocated its entire operation to this new facility in November 2014. Lease covering the new facility commenced on June 1, 2014 and expires on May 31, 2029. |
(5) | We expect to vacate our leased R&D facility in Sugar Land upon the completion of our new owned facility in Sugar Land, which we anticipate to be in April 2016. Accordingly, we do not expect to renew the lease for the current leased facility in Sugar Land. |
Item 3. | Legal Proceedings |
We anticipate that we will from time to time be subject to various claims and legal actions during the ordinary course of our business. We are not aware of any material claims or legal actions to which we, our properties or our officers or directors are subject.
Item 4. | Mine Safety Disclosure |
Not Applicable. |
30 |
PART II
Item 5. | Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities |
On September 26, 2013, our common stock began to trade on the NASDAQ Global Market under the symbol “AAOI”. Prior to that time, there was no public market for our common stock. As of March 4, 2016 there were 75 holders of record of our common stock (not including beneficial holders of our common stock holder in street name). The following table sets forth, for the periods indicated, the high and low sales prices of our common stock as reported by the NASDAQ Global Market.
Low | High | |||||||
Fiscal Year 2013: | ||||||||
Third Quarter | $ | 9.37 | $ | 10.44 | ||||
Fourth Quarter | $ | 9.07 | $ | 16.61 | ||||
Fiscal Year 2014: | ||||||||
First Quarter | $ | 11.19 | $ | 28.01 | ||||
Second Quarter | $ | 15.52 | $ | 24.58 | ||||
Third Quarter | $ | 15.61 | $ | 24.10 | ||||
Fourth Quarter | $ | 9.26 | $ | 16.66 | ||||
Fiscal Year 2015: | ||||||||
First Quarter | $ | 8.38 | $ | 14.08 | ||||
Second Quarter | $ | 13.02 | $ | 19.20 | ||||
Third Quarter | $ | 16.05 | $ | 22.51 | ||||
Fourth Quarter | $ | 16.11 | $ | 21.30 | ||||
31 |
The graph below shows the cumulative total stockholder return of an investment of $100 (and the reinvestment of any dividends thereafter) on September 26, 2013 (the first trading day of our common stock) in (i) our common stock, (ii) the NASDAQ Composite Index and (iii) the NASDAQ Telecommunications Index. Our stock price performance shown in the graph below is not indicative of future stock price performance. The following graph and related information shall not be deemed “soliciting material” or be deemed to be “filed” with the SEC, nor shall such information be incorporated by reference into any future filing, except to the extent that we specifically state that such graph and related information are incorporated by reference into such filing.
PERCENT CHANGE | ||||||
---|---|---|---|---|---|---|
Date | AAOI | NASDAQ Telecom |
NASDAQ Composite | |||
9/26/2013 | 100.00% | 100.00% | 100.00% | |||
9/30/2013 | 100.40% | 99.42% | 99.58% | |||
12/31/2013 | 150.70% | 102.48% | 110.28% | |||
3/31/2014 | 247.69% | 102.84% | 110.87% | |||
6/30/2014 | 232.93% | 107.30% | 116.39% | |||
9/30/2014 | 161.65% | 106.44% | 118.64% | |||
12/31/2014 | 112.65% | 111.61% | 125.05% | |||
3/31/2015 | 139.36% | 110.59% | 129.40% | |||
6/30/2015 | 174.30% | 109.10% | 131.67% | |||
9/30/2015 | 188.55% | 100.38% | 121.99% | |||
12/31/2015 | 172.29% | 103.25% | 132.21% |
For equity compensation plan information refer to Item 12 of this Annual Report on Form 10-K.
Dividend Policy
We have never declared or paid any cash dividends on our capital stock, and we do not anticipate paying any cash dividends on our common stock for the foreseeable future. We currently intend to retain all available funds and future earnings for use in the operation and expansion of our business. Any future determination to pay cash dividends will be at the discretion of our board of directors and will depend upon our financial condition, results of operations, terms of financing arrangements, applicable Delaware law, capital requirements and such other factors as our board of directors deems relevant. In addition, the terms of our loan agreements governing our long-term debt obligations restricts us from paying dividends.
32 |
Unregistered Sales of Equity Securities and Use of Proceeds
Not applicable.
Item 6. | Selected Financial Data |
SELECTED CONSOLIDATED FINANCIAL DATA
The selected consolidated financial data in this section is not intended to replace our consolidated financial statements and the related notes. You should read this summary consolidated financial data together with the sections titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our audited consolidated financial statements and related notes, all included elsewhere in this Annual Report on Form 10-K. We derived the consolidated statements of operations data for the years ended December 31, 2015, 2014 and 2013 and the consolidated balance sheet data as of December 31, 2015 and 2014 from our consolidated financial statements appearing elsewhere in this Annual Report on Form 10-K. The consolidated statement of operations data for the years ended December 31, 2012 and 2011 and the consolidated balance sheet data as of December 31, 2013, 2012 and 2011 are derived from our audited consolidated financial statements that have previously been filed with the SEC. Our historical results are not necessarily indicative of the results to be expected in the future and results of interim periods are not necessarily indicative of results for the entire year.
Years ended December 31, | ||||||||||||||||||||
2015 | 2014 | 2013 | 2012 | 2011 | ||||||||||||||||
(in thousands, except share and per share data) | ||||||||||||||||||||
Consolidated Statements of Operations Data: | ||||||||||||||||||||
Revenue | $ | 189,903 | $ | 130,449 | $ | 78,424 | $ | 63,421 | $ | 47,840 | ||||||||||
Cost of goods sold (1) | 129,450 | 86,203 | 55,396 | 44,492 | 34,468 | |||||||||||||||
Gross profit | 60,453 | 44,246 | 23,028 | 18,929 | 13,372 | |||||||||||||||
Operating expenses: | ||||||||||||||||||||
Research and development (1) | 20,852 | 15,970 | 8,512 | 7,603 | 6,451 | |||||||||||||||
Sales and marketing (1) | 6,381 | 6,043 | 4,191 | 3,135 | 2,412 | |||||||||||||||
General and administrative (1) | 19,771 | 17,095 | 10,632 | 8,012 | 8,243 | |||||||||||||||
Total operating expenses | 47,004 | 39,108 | 23,335 | 18,750 | 17,106 | |||||||||||||||
Income (loss) from operations | 13,449 | 5,138 | (307 | ) | 179 | (3,734 | ) | |||||||||||||
Interest and other income (expense), net: | ||||||||||||||||||||
Interest income | 328 | 369 | 104 | 26 | 15 | |||||||||||||||
Interest expense | (1,018 | ) | (326 | ) | (1,125 | ) | (1,381 | ) | (1,338 | ) | ||||||||||
Other income (expense), net | (1,591 | ) | (699 | ) | (78 | ) | 231 | (271 | ) | |||||||||||
Total interest and other income (expense), net | (2,281 | ) | (656 | ) | (1,099 | ) | (1,124 | ) | (1,594 | ) | ||||||||||
Income (loss) before income taxes | 11,168 | 4,482 | (1,406 | ) | (945 | ) | (5,328 | ) | ||||||||||||
Provision for income taxes | (375 | ) | (199 | ) | – | – | – | |||||||||||||
Net income (loss) attributable to common stockholders | $ | 10,793 | $ | 4,283 | $ | (1,406 | ) | $ | (945 | ) | $ | (5,328 | ) | |||||||
Net income (loss) per share attributable to common stockholders: | ||||||||||||||||||||
Basic | $ | 0.69 | $ | 0.30 | $ | (0.14 | ) | $ | (3.56 | ) | $ | (20.21 | ) | |||||||
Diluted | $ | 0.65 | $ | 0.28 | $ | (0.14 | ) | $ | (3.56 | ) | $ | (20.21 | ) | |||||||
Weighted average shares used to compute net income (loss) per share attributable to common stockholders: | ||||||||||||||||||||
Basic | 15,626,753 | 14,307,477 | 9,964,955 | 265,576 | 263,658 | |||||||||||||||
Diluted | 16,532,850 | 15,186,961 | 9,964,955 | 265,576 | 263,658 |
____________
(1) | These expenses include share-based compensation expense. Share-based compensation expense is accounted for at fair value, using the Black-Scholes option-pricing model for stock options and at the fair market value based on quoted market prices of the Company’s stock as of the grant date for restricted stock units and restricted stock awards. Share-based compensation expense is recognized over the vesting period of the stock options and was included in cost of goods sold and operating expenses as follows: |
33 |
Years ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Cost of goods sold | $ | 70 | $ | 88 | $ | 56 | ||||||
Research and development | 230 | 115 | 53 | |||||||||
Sales and marketing | 217 | 98 | 52 | |||||||||
General and administrative | 1,603 | 1,760 | 908 | |||||||||
Total share-based compensation expense | $ | 2,120 | $ | 2,061 | $ | 1,069 |
Years ended December 31, | ||||||||||||||||||||
2015 | 2014 | 2013 | 2012 | 2011 | ||||||||||||||||
(in thousands) | ||||||||||||||||||||
Consolidated balance sheet data: | ||||||||||||||||||||
Total cash, cash equivalents and short-term investments | $ | 40,679 | $ | 40,873 | $ | 30,751 | $ | 11,226 | $ | 2,074 | ||||||||||
Working capital (1) | 79,848 | 64,638 | 38,879 | 13,669 | (1,911 | ) | ||||||||||||||
Total assets | 273,475 | 183,670 | 111,057 | 65,748 | 53,723 | |||||||||||||||
Total debt (2) | 67,903 | 29,919 | 28,455 | 24,584 | 22,597 | |||||||||||||||
Convertible preferred stock | – | – | – | 105,367 | 94,373 | |||||||||||||||
Common stock and additional paid-in-capital | 233,353 | 192,127 | 144,036 | 5,542 | 5,303 | |||||||||||||||
Total deficit | $ | (68,247 | ) | $ | (79,040 | ) | $ | (83,323 | ) | $ | (81,917 | ) | $ | (80,972 | ) |
____________
(1) | Working capital is defined as total current assets less total current liabilities. |
(2) | Total debt is defined as short-term loans, notes payable and total long-term debt. |
34 |
Item 7. | Management’s Discussion and Analysis of Financial Condition and Results of Operations |
MANAGEMENT’S DISCUSSION AND ANALYSIS OF
FINANCIAL CONDITION AND RESULTS OF OPERATIONS
You should read the following discussion and analysis of our financial condition and results of operations in conjunction with our consolidated financial statements and the accompanying notes appearing elsewhere in this Annual Report on Form 10-K. This discussion and other parts of this Annual Report on Form 10-K contain forward-looking statements that involve risks and uncertainties, such as statements of our plans, objectives, expectations and intentions. Our actual results could differ materially from those discussed in the forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those discussed in “Risk Factors.”
Overview
We are a leading, vertically integrated provider of fiber-optic networking products. We target three networking end-markets: internet data centers, CATV and FTTH. We design and manufacture a range of optical communications products at varying levels of integration, from components, subassemblies and modules to complete turn-key equipment. In designing products for our customers, we begin with the fundamental building blocks of lasers and laser components. From these foundational products, we design and manufacture a wide range of products to meet our customers’ needs and specifications, and such products differ from each other by their end market, intended use and level of integration. We are primarily focused on the higher-performance segments within the internet data center, CATV, and FTTH markets which increasingly demand faster connectivity and innovation. Our vertically integrated manufacturing model provides us several advantages, including rapid product development, fast response times to customer requests and control over product quality and manufacturing costs.
The three end markets we target are all driven by significant bandwidth demand fueled by the growth of network-connected devices, video traffic, cloud computing and online social networking. Within the internet data center market, we benefit from the increasing use of higher-capacity optical networking technology as a replacement for copper cables, particularly as speeds reach 10 gigabits per second and above, as well as the movement to open internet data center architectures and the increasing use of in-house equipment design among leading internet companies. Within the CATV market, we benefit from a number of ongoing trends including the global build-out of CATV infrastructure, the move to higher bandwidth networks among CATV service providers and the outsourcing of system design among CATV networking equipment companies. In the FTTH market, we benefit from continuing PON deployments and system upgrades among telecommunication service providers.
We sell our products to leading original equipment manufacturers, or OEMs, in the CATV and FTTH markets as well as internet data center operators. In 2015, we earned 28.3% of our total revenue from the CATV market, and 64.9% of our total revenue from the data center market. In 2015, our key customers in the CATV market included Cisco Systems and Arris Group, Inc. In 2015, 2014 and 2013, Cisco Systems accounted for 10.4%, 8.9%, and 21.8%, respectively, of our revenue and Arris Group, Inc. accounted for 4.5%, 4.5% and 3.3%, respectively, of our revenue. In 2015, our key customers that contributed most to our FTTH revenue were a leading internet service provider and Genexis B.V., which accounted for 0.5% and less than one percent of our total revenue, respectively. In 2015, our key customers in the internet data center market included Amazon and Microsoft. In 2015 and 2014, Amazon accounted for 52.5% and 45.8% of our revenue, respectively, and Microsoft accounted for 11.6% and 3.6% of our revenue, respectively. In 2015, revenue from the CATV market, data center market, FTTH market and other markets provided 28.3%, 64.9%, 1.3%, and 5.5% of our revenue, respectively, compared to 36.3%, 49.4%, 10.4%, and 3.9% of our 2014 revenue, respectively.
In 2015, our revenue growth of 45.6% over the prior-year was driven primarily by demand for our 40Gbps data center transceiver products, as large data center operators continued deployment of high capacity optical interconnect networks within their data centers.
We expect continued sales of our 40Gbps products in 2016, although we believe that many large data center operators will begin to move to 100Gbps products in 2016. Thus, quarter-to-quarter results may show considerable variability as is usual in a period of technology transition. Similar to revenue, our gross margins can fluctuate materially depending on a variety of factors including average selling price changes, product mix, raw material cost reduction or increase, volume, manufacturing utilization and ongoing manufacturing process improvements.
Our sales model focuses on direct engagement and close coordination with our customers to determine product design, qualifications, performance and price. Our strategy is to use our direct sales force to sell to key accounts and to expand our use of distributors for increased coverage in certain international markets and certain domestic market segments. We have direct sales personnel that cover the U.S., Taiwan and China focusing primarily on major OEM customers and internet data center operators. Throughout our sales cycle, we work closely with our customers to qualify our products into their product lines. As a result, we strive to build strategic and long-lasting customer relationships and deliver products that are customized to our customers’ requirements.
35 |
Our business depends on winning competitive bid selection processes to develop components, systems and equipment for use in our customers’ products. These selection processes are typically lengthy, and as a result our sales cycles will vary based on the level of customization required, market served, whether the design win is with an existing or new customer and whether our solution being designed in our customers’ product is our first generation or subsequent generation product. We do not have any long-term purchase commitments (in excess of one year) with any of our customers, all of whom purchase our products on a purchase order basis. Once one of our solutions is incorporated into a customer’s design, however, we believe that our solution is likely to continue to be purchased for that design throughout that product’s life cycle because of the time and expense associated with redesigning the product or substituting an alternative solution.
In 2015, 2014 and 2013, we had 47, 15 and 17 design wins, respectively. We define a design win as the successful completion of the evaluation stage, where our customer has tested our product, verified that our product meets substantially all of their requirements and has informed us that they intend to purchase the product from us. Although we believe that our ability to obtain design wins is a key strength and can provide meaningful and recurring revenue, an increase or decrease in the mere number of design wins does not necessarily correlate to a likely increase or decrease in revenue, particularly in the short term. As such, the number of design wins we achieve on a quarterly or annual basis and any increase or decrease in design wins will not necessarily result in a corresponding increase or decrease in revenue in the same or immediately succeeding quarter or year. For example, if our total number of design wins in an annual or quarterly period increases or decreases compared to the total number of design wins in a prior period, this does not necessarily mean that our revenue in such period will be higher or lower than our revenue in the prior period. In fact, our experience is that some design wins result in significant revenue and some do not, and the timing of such revenue is difficult to predict as it depends on the success of the end customer’s product that uses our components. Thus, some design wins result in orders and significant revenue shortly after the design win is awarded and other design wins do not result in significant orders and revenue for several months or longer after the initial design win (if at all). We do believe that over a period of years the collective impact of design wins correlates to our overall revenue growth.
We believe we have an attractive financial profile, with strong revenue performance and control over our manufacturing costs through our vertically integrated manufacturing model. While we have incurred substantial losses since our inception, and as of December 31, 2015 had an accumulated deficit of $68.2 million, we achieved profitability in 2014, and we continued to be profitable in 2015. We have grown our revenue at a 33.6% CAGR between 2009 and 2015, including 45.6% growth year-over-year from 2014 to 2015.
Factors Affecting Our Performance
Increasing Consumer Demand for Bandwidth. Bandwidth demand in all of our target markets is driving service provider investment in new equipment and in turn generating demand for our products. Increasingly, optical networking technologies are being incorporated into networking equipment, replacing legacy copper-based networking technologies. This shift to optical networking solutions benefits us as a provider of those solutions.
Pricing, Product Cost and Margins. Our solution pricing varies depending upon the end market, the complexity of the product and the level of competition. Our product costs also vary with complexity as well as the degree to which we can utilize components designed and manufactured ourselves. We tend to realize higher gross margins on products that incorporate a higher percentage of our own components. We often initially experience lower gross margins on new products, as our pricing is based upon anticipated volume-driven cost reductions over the life of the design win. Thus, if we are unable to realize our expected cost reductions, we may experience declining gross margins on such products.
Our product pricing is established when the product is initially introduced to the market, and thereafter through periodic negotiations with customers. We generally do not agree to periodic automatic price reductions. Furthermore, due to the dynamics in the CATV market and the value of our outsourced design services to our customers, we believe we face less downward price pressure than many of our competitors. We sell a wide variety of products among our three target markets and our gross margin is heavily dependent in any quarter on the product mix achieved during that period.
Customer Concentration within End Markets. Historically, our revenue has been significantly concentrated, first within the CATV market and in 2014 and 2015 within the internet data center market. Moreover, within these markets, revenue tends to be concentrated among a small number of customers. In 2014 and 2015, we have taken several actions to increase the diversity of our customer base. These actions include the creation of a new sales incentive program, hiring additional sales staff to improve our ability to serve new customers, and additional customized design of products that we believe will appeal to new customers. Furthermore, we have developed additional original design manufacturer, or ODM, relationships with customers in each of our target markets which should enable us to diversify our revenue base. In 2015 we had three customers that each accounted for more than 10% of our revenue, compared with only two such customers in 2014.
36 |
Product Development. We invest heavily to develop new and innovative products. The majority of our research and development expense is allocated to product development, usually with a specific customer and customer platform in mind. We believe our close coordination with our customers regarding their future product requirements enhances the efficiency of our research and development expenditures.
Discussion of Financial Performance
Revenue
We generate revenue through the sale of our products to equipment providers for the internet data center, CATV, FTTH and other markets. We derive a significant portion of our revenue from our top ten customers, and we anticipate that we will continue to do so for the foreseeable future. The following chart provides the revenue contribution from each of the markets we serve for the years 2015, 2014 and 2013, as well as the corresponding percentage of our total revenue for each period:
Years ended December 31, | ||||||||||||
Market | 2015 | 2014 | 2013 | |||||||||
(in thousands, except percentages) | ||||||||||||
CATV | $ | 53,675 | $ | 47,389 | $ | 47,373 | ||||||
Data Center | 123,286 | 64,453 | 19,386 | |||||||||
FTTH | 2,458 | 13,591 | 4,377 | |||||||||
Other | 10,484 | 5,016 | 7,288 | |||||||||
Total | $ | 189,903 | $ | 130,449 | $ | 78,424 | ||||||
Percentage of Revenue | ||||||||||||
CATV | 28.3% | 36.3% | 60.4% | |||||||||
Data Center | 64.9% | 49.4% | 24.7% | |||||||||
FTTH | 1.3% | 10.4% | 5.6% | |||||||||
Other | 5.5% | 3.9% | 9.4% | |||||||||
Total Revenue | 100.0% | 100.0% | 100.0% |
In 2015, 2014 and 2013, our top ten customers represented 88.7%, 87.2% and 76.9% of our revenue, respectively. In 2015, our key customers in the CATV market included Cisco Systems, Arris Group, Inc. and Pace plc. In 2015, 2014 and 2013, Cisco Systems accounted for 10.4%, 8.9%, and 21.8%, respectively, of our revenue and Arris Group, Inc. accounted for 4.5%, 4.5% and 3.3%, respectively, of our revenue. In 2015, our key customers in the internet data center market included Amazon and Microsoft. In 2015 and 2014, Amazon accounted for 52.5% and 45.8% of our revenue, respectively, and Microsoft accounted for 11.6% and 3.6% of our revenue, respectively.
In 2015, our key customers that contributed most to our FTTH revenue were a leading internet service provider and Genexis B.V., which accounted for less than one percent of our total revenue.
Revenue is recognized when the product is shipped and title has transferred to the customer. We bear all costs and risks of loss or damage to the goods up to that point. On most orders, our terms of sale provide that title passes to the customer upon placement by us with a common carrier (upon shipment). A majority of our annual sales are denominated in U.S. dollars, but some sales from our Taiwan location and China-based subsidiary are denominated in NT dollars and RMB, respectively. For the year ended December 31, 2015, 10.9% of our total revenue was derived from our China-based subsidiary, with $3.3 million denominated in RMB and 60.9% of our total revenue was derived from our Taiwan-based facility with an immaterial amount denominated in NT dollars. We expect a similar portion of our sales to be denominated in foreign currencies in 2015.
Cost of goods sold and gross margin
Our cost of goods sold is impacted by variances arising from changes in yields and production volume, as well as increases or decreases in the cost of raw materials used in production. We typically experience lower yields and higher associated costs on new products. In general, our cost of goods sold for a particular product declines over time as a result of increasing efficiencies in the manufacturing processes, or supply cost declines, as well as yield improvements and testing enhancements.
We manufacture our products in all three of our facilities in the U.S., Taiwan and China. Generally, laser chips and optical components are manufactured in our U.S. facility, optical components and subassemblies are manufactured in our Taiwan facility, and optical components and optical equipment are manufactured in our China facility. Because of our vertical integration model, we generally utilize our own optical component products in our semi-finished and finished goods that we sell between and among our respective manufacturing operations. We base those internal sales upon established transfer pricing methodologies. However, we eliminate all of those internal sales, and cost of goods sold transactions, to arrive at total revenue and cost of goods sold on a consolidated basis.
37 |
We have a global set of suppliers to help balance considerations related to product availability, quality and cost. Components of our cost of goods sold are denominated in U.S. or NT dollars or RMB, depending upon the manufacturing location.
Gross profit as a percentage of total revenue, or gross margin, has been and is expected to continue to be affected by a variety of factors, including the introduction of new products, production volumes, the mix of products sold, the geographic region in which products are sold, changes in the cost and volumes of materials purchased from our suppliers, changes in labor costs, changes in overhead costs, reserves for excess and obsolete inventories and changes in the average selling prices of our products. Although our overall gross margins over the past three years have been between 27.8% and 34.8%, our gross margins vary more broadly on a product-by-product basis. Our newer and more advanced products typically have higher average selling prices and higher gross margins; however, until the product volumes scale, the gross margin from newer and advanced products may initially be lower. Within our markets, we may sell similar products to different geographic regions at different prices, and therefore realize different gross margins among those similar products. We generally realize a lower gross margin in sales to Asian markets. Our strategy is to improve our gross margins through vertical integration such as utilization of our own laser chips and optical sub-components in our solutions. We expect that our gross margins are likely to continue to fluctuate from quarter to quarter because of the variety of products we sell and the relative product mix within a quarter.
Operating expenses
Our operating expenses consist of research and development, sales and marketing, and general and administrative expenses. Personnel costs are the most significant component of operating expenses and include salaries, benefits, bonuses and share-based compensation. With regard to sales and marketing expense, personnel costs also include sales commissions.
Research and development. Research and development, or R&D, expense consists primarily of personnel costs, including share-based compensation for R&D personnel, and R&D work orders (that include material, direct labor and allocated overhead), as well as allocated development costs, such as engineering services, software and hardware tools, depreciation of capital equipment and facility costs. We record all research and development expense as incurred. Customers rely upon us to assist them with the development of new products and modification of existing products because of our extensive optical design and manufacturing expertise. We work closely with our customers in the critical design phase of product development and are often reimbursed for those development efforts. By virtue of our overseas R&D operations and by focusing on customer-specific projects, our research and development expenses have tended to represent a lower percentage of revenue compared to some of our competitors. In the future, we expect research and development expense to increase on a dollar basis, but continue to decline as a percentage of revenue, to the extent that our revenue increases over time.
Sales and marketing. Sales and marketing expense consists primarily of personnel costs, including share-based compensation for our sales and marketing personnel, as well as travel and trade show expense, sales commissions and the allocation of overall corporate services and facility costs. We sell our products to customers who either incorporate our products into their offering or resell our products to end customers. Because we sell to a limited number of well-established customers, we employ a limited number of sales professionals who are able to cover large markets. We compensate our sales staff through base salary and commissions, with base salary being the largest component of overall compensation. Total sales commissions to employees amounted to less than one percent of our revenue in 2015. Additionally, we pay commissions to third parties on certain product lines and identified customers, which also amounted to less than one percent of our revenue in 2015. As such, our sales and marketing expense does not directly increase with revenue. In the future, we expect sales and marketing expense to increase on a dollar basis as we incrementally increase our overall sales activities, but expect our sales and marketing expense to decline as a percentage of revenue, to the extent our revenue increases over time.
General and administrative. General and administrative expense consists primarily of personnel costs, including share-based compensation, primarily for our finance, human resources, legal and information technology personnel and certain executive officers, as well as professional services costs related to accounting, tax, banking, legal and information technology services, depreciation of capital equipment and facility costs. We expect general and administrative expense to increase as we continue to grow in both size and complexity as a public company. We expect rising costs including increased audit and legal fees, costs to comply with the Sarbanes-Oxley Act and the rules and regulations applicable to companies listed on a national stock exchange, as well as investor relations expense and higher insurance premiums. In the future, we expect general and administrative expense to increase on a dollar basis but continue to decline as a percentage of revenue, to the extent that our revenue increases over time.
38 |
Other income (expense)
Interest income consists of income earned on our cash, cash equivalents and short-term investments. Interest expense consists of amounts paid for interest on our short-term and long-term debt borrowings.
Other income (expense), net is primarily made up of foreign currency transaction gains and losses. The functional currency of our China subsidiary is the RMB and the foreign currency transaction gains and losses of our China subsidiary primarily result from their transactions in U.S. dollars. The functional currency of our Taiwan location is the NT dollar and the foreign currency transaction gains and losses of our Taiwan location primarily result from their transactions in U.S. dollars.
Income taxes
We are a U.S. registered company and are subject to income taxes in the U.S. We also operate in a number of countries throughout the world, including Taiwan and China. Consequently, our effective tax rate is impacted by the geographic distribution of our earnings or losses and the tax laws and regulations in each geographical region. We expect that our income taxes will vary in relation to our profitability and the geographic distribution of our profits. In 2015 and 2014, our effective tax rate was 3.3% and 4.4%, respectively. Our effective U.S. federal income tax rate was 0% prior to 2014 as we incurred operating losses and have recorded a valuation allowance against those losses. At December 31, 2015, our U.S. accumulated net operating loss, or NOL, was $50.3 million. If we earn profits in the U.S., we expect to reduce our cash tax obligations by the utilization of NOL carry forwards. Our NOL benefits expire over the twelve-year period from 2021 to 2033. Under Section 382 of the Internal Revenue Code of 1986, as amended, if a corporation undergoes an “ownership change,” the corporation’s ability to use its pre-change NOLs, capital loss carry forwards and other pre-change tax attributes to offset its post-change income may be limited going forward. Based upon an analysis of our equity ownership, we have experienced an ownership change and our NOL carry forwards are limited in dollar amount. The amount of NOL available each year may decrease by the amount of NOL utilized and may increase by the amount of any operating losses incurred. Should we experience additional ownership changes our NOL carry forwards may be further limited.
Our wholly owned subsidiary, Global Technology, Inc., has enjoyed preferential tax concessions in China as a national high-tech enterprise. In March 2007, China’s parliament enacted the PRC Enterprise Income Tax Law, or the EIT Law, under which, effective January 1, 2008, China adopted a uniform income tax rate of 25% for all enterprises including foreign invested enterprises. Global Technology, Inc. was recognized as a national high-tech enterprise in 2008 and was entitled to a 15% tax rate for a three year period from November 2008 to November 2011. In 2011, Global Technology, Inc. renewed its national high-tech enterprise certificate and therefore extended its three year tax preferential status from November 2011 to November 2014. In 2014, Global Technology, Inc. again renewed its national high-tech enterprise certificate and therefore extended its three year tax preferential status from November 2014 until September 2017.
For the years ended December 31, 2015 and 2014, we had $1.8 million and $1.7 million, respectively, of unrecognized tax benefits related to U.S. tax benefits recognized for which do not meet the more likely than not threshold. We believe that it is reasonably possible that $0.3 million of our remaining unrecognized tax positions may be recognized by the end of 2016. If recognized, there would be no impact to our effective tax rate as a result of the full valuation allowance previously recognized.
Results of Operations
The following table set forth our results of operations for the periods presented and as a percentage of our revenue for those periods. The period-to-period comparison of our financial results is not necessarily indicative of our financial results to be achieved in future periods.
Years ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Revenue, net | 100.0% | 100.0% | 100.0% | |||||||||
Cost of goods sold | 68.2% | 66.1% | 70.6% | |||||||||
Gross profit | 31.8% | 33.9% | 29.4% | |||||||||
Operating expenses | ||||||||||||
Research and development | 11.0% | 12.2% | 10.9% | |||||||||
Sales and marketing | 3.4% | 4.6% | 5.3% | |||||||||
General and administrative | 10.3% | 13.1% | 13.6% | |||||||||
Total operating expenses | 24.7% | 30.0% | 29.7% | |||||||||
Income (loss) from operations | 7.1% | 3.9% | -0.3% | |||||||||
Interest and other income (expense), net | -1.2% | -0.5% | -1.4% | |||||||||
Income (loss) before income taxes | 5.9% | 3.4% | -1.7% | |||||||||
Income taxes | -0.2% | -0.2% | 0.0% | |||||||||
Net income (loss) | 5.7% | 3.3% | -1.7% |
39 |
Comparison of Years Ended December 31, 2015 and 2014
Revenue
We generate revenue through the sale of our products to equipment providers and network operators for the internet data center, CATV, FTTH and other markets. We derive a significant portion of our revenue from our top ten customers, and we anticipate that we will continue to do so for the foreseeable future. We also anticipate that our revenue derived from the internet data center market will continue to increase as a percentage of our revenue as we further penetrate and extend our products into this market. The following charts provide the revenue contribution from each of the markets we served for the years ended December 31, 2015 and 2014:
Years ended December 31, | ||||||||
2015 | 2014 | |||||||
CATV | 28.3% | 36.3% | ||||||
Data Center | 64.9% | 49.4% | ||||||
FTTH | 1.3% | 10.4% | ||||||
Other | 5.5% | 3.9% | ||||||
Total Revenue | 100.0% | 100.0% |
Years ended December 31, | Change | |||||||||||||||
2015 | 2014 | Amount | % | |||||||||||||
(in thousands, except percentages) | ||||||||||||||||
CATV | $ | 53,675 | $ | 47,389 | $ | 6,286 | 13.3% | |||||||||
Data Center | 123,286 | 64,453 | 58,833 | 91.3% | ||||||||||||
FTTH | 2,458 | 13,591 | (11,133 | ) | (81.9% | ) | ||||||||||
Other | 10,484 | 5,016 | 5,468 | 109.0% | ||||||||||||
Total Revenue | $ | 189,903 | $ | 130,449 | $ | 59,454 | 45.6% |
Revenues in the internet data center market were driven primarily by increasing demand for our 40 gigabits per second transceivers as our customers continued to upgrade their technology infrastructure. The decrease in revenue in our FTTH market is due to decreased demand from our major FTTH customer as a result of their decision to continue using an existing technology in their deployments. The increase in revenues in the CATV market for the year was a result of revenue derived from newly-designed products that have begun to be sold in higher quantities by our customers, as well as increased demand for new and existing products in certain international markets, especially in Latin America earlier in the year.
In the years ended December 31, 2015 and 2014, our top ten customers represented 88.7% and 87.2% of our revenue, respectively.
Cost of goods sold and gross margin
Years ended December 31, | ||||||||||||||||||||||||
2015 | 2014 | Change | ||||||||||||||||||||||
Amount | % of Revenue | Amount | % of Revenue | Amount | % | |||||||||||||||||||
(in thousands, except percentages) | ||||||||||||||||||||||||
Cost of goods sold | $ | 129,450 | 68.2% | $ | 86,203 | 66.1% | $ | 43,247 | 50.2% | |||||||||||||||
Gross margin | 60,453 | 31.8% | 44,246 | 33.9% |
40 |
Cost of goods sold increased by $43.2 million, or 50.2%, from 2014 to 2015, primarily due to a 45.6% increase in sales over the prior year. Within our markets, we may sell similar products in different geographic regions at different prices, resulting in different gross margins among our products. Also, within our segments there are various different product types which may have different gross margins. The decrease in gross margin the year ended December 31, 2015 compared to the same period ended December 31, 2014 was primarily the result of a differing product mix in our internet data center and CATV products.
Operating expenses
Years ended December 31, | ||||||||||||||||||||||||
2015 | 2014 | Change | ||||||||||||||||||||||
Amount | % of revenue | Amount | % of revenue | Amount | % | |||||||||||||||||||
(in thousands, except percentages) | ||||||||||||||||||||||||
Research and development | $ | 20,852 | 11.0% | $ | 15,970 | 12.2% | $ | 4,882 | 30.6% | |||||||||||||||
Sales and marketing | 6,381 | 3.4% | 6,043 | 4.6% | 338 | 5.6% | ||||||||||||||||||
General and administrative | 19,771 | 10.3% | 17,095 | 13.1% | 2,676 | 15.7% | ||||||||||||||||||
Total operating expenses | $ | 47,004 | 24.7% | $ | 39,108 | 30.0% | $ | 7,896 | 20.2% |
Research and development expense
Research and development expense increased by $4.9 million, or 30.6%, from 2014 to 2015. This was primarily due to increases in personnel costs, rent and utilities, R&D work orders and project costs related to 100G data center products, DOCSIS 3.1-capable CATV products, other new product development, increase in depreciation expense resulting from additional R&D equipment investments, and costs associated with our new R&D center in Lawrenceville, GA. The percentage of research and development expenses over sales decreased from 12.2% to 11.0%, from the year ended December 31, 2014 compared to the year ended December 31, 2015.
Sales and marketing expense
Sales and marketing expense increased by $0.3 million, or 5.6%, from 2014 to 2015. This was due to an increase in expenses for a new sales incentive program which was implemented in May, 2014, and an increase in sales commissions directly related to our revenue growth. The percentage of sales and marketing expenses over sales decreased from 4.6% to 3.4% from the year ended December 31, 2014 compared to the year ended December 31, 2015.
General and administrative expense
General and administrative expense increased by $2.7 million, or 15.7%, from 2014 to 2015. This was primarily due to an increase in payroll and benefits, professional fees associated with being a public company and depreciation expense related to relocation of our factory in Taiwan. The percentage of general and administrative expenses over sales decreased from 13.1 % to 10.3% from the year ended December 31, 2014 compared to the year ended December 31, 2015.
Other income (expense), net
Years ended December 31, | ||||||||||||||||||||||||
2015 | 2014 | Change | ||||||||||||||||||||||
Amount | % of revenue | Amount | % of revenue | Amount | % | |||||||||||||||||||
(in thousands, except percentages) | ||||||||||||||||||||||||
Interest income | $ | 328 | 0.2% | $ | 369 | 0.3% | $ | (41 | ) | (11.1% | ) | |||||||||||||
Interest expense | (1,018 | ) | (0.5% | ) | (326 | ) | (0.2% | ) | (692 | ) | 212.3% | |||||||||||||
Other expense, net | (1,591 | ) | (0.8% | ) | (699 | ) | (0.5% | ) | (892 | ) | 127.6% | |||||||||||||
Total Other expense, net | $ | (2,281 | ) | (1.2% | ) | $ | (656 | ) | (0.4% | ) | $ | (1,625 | ) | 247.7% |
41 |
Interest income decreased over the same prior year periods due to lower cash and investment balances.
Interest expense increased overall for the periods with additional borrowing activities during the year ended December 31, 2015 to fund expansion projects.
Other expense, net increased by $0.9 million from 2014 to 2015 due to an increase in unrealized foreign exchange losses of $1.3 million resulting from the depreciation of the RMB and NTD currencies against the U.S. dollar compared to those losses in the same prior year period. These unrealized losses were offset by an increase in realized foreign exchange gains of $0.4 million compared to the same prior year period. We qualify as a high-tech enterprise in China, as determined by the Chinese government, and are paid subsidies from time to time by the Chinese government to foster local high-tech manufacturing, which are recorded as other income. We received $0.3 million in subsidy during the year ended December 31, 2015 compared to $0.2 million in the same prior year period.
Provision for income taxes
Years ended December 31, | ||||||||||||||||
2015 | 2014 | Change | ||||||||||||||
(in thousands, except percentages) | ||||||||||||||||
Provision for income taxes | $ | (375 | ) | $ | (199 | ) | (176 | ) | 46.9% |
Our income tax expense consists of U.S. alternative minimum tax, state taxes and Taiwan income tax recorded during the periods. Our effective tax rate is affected by recurring items, such as tax rates in state and foreign jurisdictions and the relative amounts of income we earn in those jurisdictions. It is also affected by the change in the valuation allowance, as our deferred tax assets are fully offset by a deferred tax valuation allowance.
We recorded a valuation allowance against all of our deferred tax assets as of December 31, 2015, and 2014. We have determined a full valuation allowance on our deferred tax assets is required until there is sufficient evidence to support that our deferred taxes are realizable. However, given our recent two years of earnings and uncertainty of anticipated future earnings, we believe that there is a reasonable possibility that within the next 12 months, sufficient positive evidence may become available to allow us to reach a conclusion that a significant portion of the valuation allowance will no longer be needed. Release of the valuation allowance would result in the recognition of certain deferred tax assets and a decrease to income tax expense for the period the release is recorded. However, the exact timing and amount of the valuation allowance release are subject to change on the basis of the level of profitability that we are able to actually achieve.
In considering whether or not to continue to maintain the valuation allowance, we consider all available positive and negative evidence, including: historical profits and losses, forecasts of future profits or losses, and trends in the industries that we serve that may affect our ability to continue to generate profits. In projecting future taxable income, we begin with historical results adjusted for the results of discontinued operations and incorporate assumptions about the amount of future state, federal, and foreign pretax operating income adjusted for items that do not have tax consequences. The assumptions about future taxable income require the use of significant judgment and are consistent with the plans and estimates we are using to manage the underlying businesses. We currently have deferred tax assets in China, Taiwan, and the United states. When considering positive and negative evidence, we analyze positive and negative evidence in each jurisdiction independently.
42 |
Comparison of Years Ended December 31, 2014 and 2013
Revenue
The following charts provide the revenue contribution from each of the markets we served for the years ended December 31, 2014 and 2013:
Years ended December 31, | ||||||||
2014 | 2013 | |||||||
CATV | 36.3% | 60.4% | ||||||
Data Center | 49.4% | 24.7% | ||||||
FTTH | 10.4% | 5.6% | ||||||
Other | 3.9% | 9.3% | ||||||
Total Revenue | 100.0% | 100.0% |
Years ended December 31, | Change | |||||||||||||||
2014 | 2013 | Amount | % | |||||||||||||
(in thousands, except percentages) | ||||||||||||||||
CATV | $ | 47,389 | $ | 47,373 | $ | 16 | 0.0% | |||||||||
Data Center | 64,453 | 19,386 | 45,067 | 232.5% | ||||||||||||
FTTH | 13,591 | 4,377 | 9,214 | 210.5% | ||||||||||||
Other | 5,016 | 7,288 | (2,272 | ) | (31.2% | ) | ||||||||||
Total Revenue | $ | 130,449 | $ | 78,424 | $ | 52,025 | 66.3% |
Of our total revenue in 2014, we generated $47.4 million, or 36.3%, from the CATV market, $64.5 million, or 49.4%, from the internet data center market, $13.6 million, or 10.4%, from the FTTH market, and $5.0 million, or 3.9%, from other markets. Total revenue increased by $52.0 million, or 66.3%, from 2013 to 2014.
The increase in revenue was attributable to a $45.1 million increase from the internet data center market, primarily driven by increasing demand for our 10 gigabits per second and 40 gigabits per second transceivers as our customers continued to upgrade their technology infrastructure. Revenues in the FTTH market increased by $9.2 million, primarily driven by increasing demand for our WDM-PON products to existing customers. CATV revenues were flat year over year due to a decline in sales in certain emerging markets, offset by increased sales for newly-designed products.
Cost of goods sold and gross margin
Years ended December 31, | ||||||||||||||||||||||||
2014 | 2013 | Change | ||||||||||||||||||||||
Amount | % of Revenue | Amount | % of Revenue | Amount | % | |||||||||||||||||||
(in thousands, except percentages) | ||||||||||||||||||||||||
Cost of goods sold | $ | 86,203 | 66.1% | $ | 55,396 | 70.6% | $ | 30,807 | 55.6% | |||||||||||||||
Gross margin | 44,246 | 33.9% | 23,028 | 29.4% |
Cost of goods sold increased by $30.8 million, or 55.6%, from 2013 to 2014, primarily due to the combination of a $21.8 million increase in direct material costs and a $9.0 million increase in labor and overhead costs, both of which were associated with our increase in revenues. Different products within our portfolio may have gross margins that vary from other products. Moreover, among the markets that we serve, average gross margins vary. In general, products that incorporate newer technology or are more differentiated from our competitors generate higher gross margins, whereas products that are older or incorporate less differentiated technology generate lower gross margins. The increase in gross margin is primarily due to a larger percentage of sales of newer, more technologically differentiated products in 2014 compared with 2013 and an overall increase in revenue.
Operating expenses
Years ended December 31, | ||||||||||||||||||||||||
2014 | 2013 | Change | ||||||||||||||||||||||
Amount | % of revenue | Amount | % of revenue | Amount | % | |||||||||||||||||||
(in thousands, except percentages) | ||||||||||||||||||||||||
Research and development | $ | 15,970 | 12.2% | $ | 8,512 | 10.9% | $ | 7,458 | 87.6% | |||||||||||||||
Sales and marketing | 6,043 | 4.6% | 4,191 | 5.3% | 1,852 | 44.2% | ||||||||||||||||||
General and administrative | 17,095 | 13.1% | 10,632 | 13.6% | 6,463 | 60.8% | ||||||||||||||||||
Total operating expenses | $ | 39,108 | 30.0% | $ | 23,335 | 29.8% | $ | 15,773 | 67.6% |
43 |
Research and development expense
Research and development expense increased by $7.5 million, or 87.6%, from 2013 to 2014. This was primarily due to increases in personnel costs, rent and utilities, R&D work orders and project costs related to FTTH WDM-PON products, 40G and 100G data center products and other new product development. Depreciation expense also increased due to additional R&D equipment investments.
Sales and marketing expense
Sales and marketing expense increased by $1.9 million, or 44.2%, from 2013 to 2014. This was due to an increase in personnel costs due to additional sales and marketing staff to better serve our customers, expenses for a new sales incentive program and an increase in sales commissions directly related to our revenue growth.
General and administrative expense
General and administrative expense increased by $6.5 million, or 60.8%, from 2013 to 2014. This was primarily due to an increase in share-based compensation expense, personnel costs, various expenses incurred due to becoming a public company as well as non-recurring expenses related to relocation of our Taiwan plant and CFO separation costs.
Other income (expense), net
Years ended December 31, | ||||||||||||||||||||||||
2014 | 2013 | Change | ||||||||||||||||||||||
Amount | %
of revenue | Amount | %
of revenue | Amount | % | |||||||||||||||||||
(in thousands, except percentages) | ||||||||||||||||||||||||
Interest income | $ | 369 | 0.3% | $ | 104 | 0.1% | $ | 265 | 254.8% | |||||||||||||||
Interest expense | (326 | ) | (0.2% | ) | (1,125 | ) | (1.4% | ) | 799 | (71.0% | ) | |||||||||||||
Other income (expense), net | (699 | ) | (0.5% | ) | (78 | ) | (0.1% | ) | (621 | ) | 796.2% | |||||||||||||
Total other expense, net | $ | (656 | ) | (0.4% | ) | $ | (1,099 | ) | (1.4% | ) | $ | 443 | (40.3% | ) |
Interest income increased over the same prior year periods due to higher cash and investment balances.
Interest expense decreased overall for the periods due to the benefit of lower interest rates as well as lower loan balances.
Other income (expense), net increased by $0.4 million from 2013 to 2014. Other net expense increased due to unrealized foreign exchange losses recognized resulting from the depreciation of the Asia currencies against the U.S. dollar compared to unrealized foreign exchange losses in the same prior year period. We have historically qualified as a high-tech enterprise in China, as determined by the Chinese government, and are paid subsidies from time to time by the Chinese government to foster local high-tech manufacturing. We received less subsidy in 2014 compared to 2013.
Provision for income taxes
Years ended December 31, | ||||||||||||||||
2014 | 2013 | Change | ||||||||||||||
(in thousands, except percentages) | ||||||||||||||||
Provision for income taxes | $ | (199 | ) | $ | – | (199 | ) | 100.0% |
Our income tax expense for 2014 consists of U.S. alternative minimum tax recorded during the period. Our effective tax rate is affected by recurring items, such as tax rates in state and foreign jurisdictions and the relative amounts of income we earn in those jurisdictions. It is also affected by the change in the valuation allowance, as our deferred tax assets are fully offset by a deferred tax valuation allowance.
44 |
Liquidity and Capital Resources
From inception until our initial public offering, we financed our operations through private sales of equity securities, cash generated from operations and from various lending arrangements. In 2015, we entered into credit agreements with East West Bank and Comerica Bank totaling $62.0 million to finance our working capital, campus expansion and equipment investments. In addition, we also entered various credit agreements with several Taiwan banks through our Taiwan branch totaling $26.5 million. On June 3, 2015, we filed a Registration Statement on Form S-3 with the Securities and Exchange Commission effective June 23, 2015, providing for the public offer and sale of certain securities of the Company from time to time, at our discretion, up to an aggregate amount of $140 million. As of December 31, 2015, we have sold 1.9 million shares of common stock at a weighted average price of $21.54 per share, providing proceeds of $38.6 million, net of expenses and underwriting discounts and commissions. As of December 31, 2015, we had $37.7 million of unused borrowing capacity from all of our loan agreements. As of December 31, 2015, our cash, cash equivalents, restricted cash and short-term investments totaled $40.7 million. Cash and cash equivalents are held for working capital purposes and are invested primarily in money market or time deposit funds. We do not enter into investments for trading or speculative purposes.
The table below sets forth selected cash flow data for the periods presented:
Years Ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Net cash provided by (used in) operating activities | $ | (15,212 | ) | $ | 8,530 | $ | (6,190 | ) | ||||
Net cash used in investing activities | (61,620 | ) | (45,388 | ) | (17,736 | ) | ||||||
Net cash provided by financing activities | 73,114 | 47,250 | 35,368 | |||||||||
Effect of exchange rates on cash and cash equivalents | (383 | ) | (223 | ) | (159 | ) | ||||||
Net increase (decrease) in cash | $ | (4,101 | ) | $ | 10,169 | $ | 11,283 |
Operating activities
In 2015, net cash used in operating activities was $15.2 million. Cash used was primarily from an increase in inventories of $37.5 million to support revenue growth, an increase in accounts receivable from our customers of $7.5 million and a decrease in accounts payable to our vendors of $1.3 million. The cash used was offset by an increase in accrued liabilities of $5.0 million in 2015.
In 2014, net cash provided by operating activities was $8.5 million. Accounts payable increases of $18.9 million were offset by an increase in accounts receivable from our customers of $9.7 million and an increase in inventories of $16.1 million to support revenue growth.
In 2013, net cash used in operating activities was $6.2 million. Cash used in operating activities primarily related to an increase in receivables from customers from the sale of our products in excess of cash paid to our suppliers. We also spent $7.5 million to increase our inventories to support increases in sales volumes, but this was offset by an increase in accounts payable.
Investing activities
Our investing activities consisted primarily of capital expenditures and purchases of intangible assets.
In 2015, net cash used in investing activities was $61.6 million for the purchase of additional machinery and equipment and for investment in the construction of our US and Taiwan plants. Deferred charges also increased associated with the purchase of new machinery and equipment as well as patent spending.
In 2014, net cash used in investing activities was $45.4 million for the purchase of additional machinery and equipment, for investment in leasehold improvements for our Taiwan plant expansion and the payment for intellectual property licenses to support new product development efforts and manufacturing activities as well as an increase in deferred charges.
In 2013, we used $17.7 million of cash for investing activities, of which $9.3 million of cash was used for the purchase of additional machinery and equipment to support our research and development efforts and manufacturing activities and $8.0 million of cash was used for the purchase of short-term investments.
Financing activities
Our financing activities have historically consisted primarily of proceeds from the issuance of common stock and arrangements with various commercial lenders.
45 |
In 2015, our financing activities provided $73.1 million in cash. We received $37.5 million in net borrowings associated with our bank loans, $1.9 million in net proceeds from acceptance payable, offset by increased restricted cash of $4.4 million related to our bank loan requirements. We also received $38.6 million in net proceeds from the sale of our common stock pursuant to an at-the-market offering. See Note M to the Consolidated Financial Statements.
In 2014, our financing activities provided $47.3 million in cash. We received $45.7 million in net proceeds from a secondary offering of common stock. Net borrowings associated with our bank loans and bank acceptance payable provided $1.9 million in cash
In 2013, our financing activities provided $35.4 million in cash. We received $31.5 million in net proceeds from our initial public offering. We received $3.5 million in net borrowings associated with our bank loans and $0.7 million from the exercise of stock options and warrants. These increases were offset by an increase in our restricted cash by $0.2 million, related to the compensating balances required by our loans in China. See Note B to the Consolidated Financial Statements.
Loans and commitments
We have lending arrangements with several financial institutions, including a revolving line of credit and a term loan with East West Bank and Comerica Bank in the U.S., lines of credit and financing agreements for our Taiwan branch and several lines of credit arrangements for our China subsidiary. As of December 31, 2015, we had $37.7 million of unused borrowing capacity.
On June 30, 2015, we entered into a credit agreement with East West Bank and Comerica Bank, a second lien deed of trust, multiple security agreements and promissory notes evidencing two credit facilities and a term loan. The credit agreement included a $25.0 million revolving line of credit which matures on June 30, 2018 and a $10 million term loan maturing on June 30, 2020. The interest rate on these loans is the LIBOR Borrowing Rate plus 2.75% or 3.0%. As of December 31, 2015, $23.0 million was outstanding under the revolving line of credit and $2.0 million was outstanding under the term loans.
We also have with East West Bank a term loan of $5 million with monthly payments of principal and interest that matures on July 31, 2019. As of December 31, 2015, the outstanding balance of such term loan was $4.2 million.
On January 26, 2015, we entered into a construction loan agreement with East West Bank for up to $22.0 million dollars to finance the construction of our campus expansion plan in Sugar Land, Texas. Upon signing the agreement, we deposited $11.0 million into a restricted bank account for owner’s contribution of construction costs. The loan will have a fifteen month draw down period with monthly interest payments commencing on February 26, 2015 and ending April 26, 2016. Thereafter, the entire outstanding principal balance shall be converted to a sixty-nine month term loan with principal and interest payments due monthly amortized over three hundred months. The first principal and interest payment is due on May 26, 2016 and will continue the same day of each month thereafter. The final principal and interest payment is due on January 26, 2022 and will include all unpaid principal and all accrued and unpaid interest. We may pay without penalty all or a portion of the amount owed earlier than due. Under the loan agreement, the loan bears interest, at an annual rate based on the one-month LIBOR Borrowing Rate plus 2.75%. As of December 31, 2015, there was $8.6 million outstanding under this loan agreement and there was zero balance in the restricted bank account.
The loan and security agreements with East West Bank and Comerica Bank require us to maintain certain financial covenants, including a minimum current ratio and minimum annual EBITDA. As of December 31, 2015, we were in compliance with all covenants contained in these agreements.
On January 6, 2015, our Taiwan branch entered into a one-year revolving credit facility with CTBC Bank Co. Ltd. in Taipei, Taiwan for 90.0 million New Taiwan dollars, or approximately $3.0 million. Its obligations under the credit facility are unsecured. Borrowings under the credit facility bear interest at a rate based on the Bank’s corporate interest rate index plus 1.5%, adjusted monthly. As of the execution of the credit facility, the Bank’s corporate interest rate index is 0.91%. As of December 31, 2015, $2.6 million was outstanding under this credit facility.
On March 9, 2015, our Taiwan branch increased its $4.0 million credit facility with E. Sun Commercial Bank to $7.0 million. Its obligations under the credit facility are secured by our $4.0 million cash deposit in a one-year CD with such bank and mature on May 27, 2016. The $4.0 million revolving line of credit with CD security bears interest at a rate equal to Taiwan Deposit Index Rate plus 0.41% for New Taiwan dollar borrowings and a 0.1% service fee for U.S. dollar borrowings. The additional $3.0 million credit facility bears interest at a rate equal to LIBOR plus 1.7% divided by 0.946 and a 0.3% service fee for U.S. dollar borrowings. As of December 31, 2015 and 2014, $4.5 million and $3.6 million were outstanding under this credit facility.
46 |
On March 25, 2015, our Taiwan branch renewed its $4.0 million, one year revolving credit facility agreement, originally dated December 31, 2013, with Mega International Commercial Bank. Obligations under the credit facility are secured by a $4.0 million cash deposit in a CD with such bank. Borrowings under this credit facility bear interest at a rate not less than the LIBOR borrowing rate plus 1.0%, divided by 0.946 for U.S. and other currency borrowings, New Taiwan dollar borrowings bear interest at a rate equal to the Bank’s base lending rate plus 0.76%. The current effective interest rate is 1.77%. As of December 31, 2015 and 2014, $3.4 million and $3.5 million were outstanding under this credit facility.
On April 1, 2015, our Taiwan branch entered into a comprehensive credit line agreement with the Taipei branch of China Construction Bank, providing a revolving credit line of $10 million, maturing on April 1, 2016. Borrowings under the credit line agreement are secured by a standby letter of credit issued by the China branch of the bank under existing agreements between the bank and our China subsidiary. Borrowings under the credit line agreement reduce the amounts available under the existing credit line between the bank and our China subsidiary and cannot exceed 97% of the amount of the standby letter of credit issued by the China branch of the bank. Borrowings under the credit line agreement will bear interest at a rate not less than LIBOR plus 1.5% for US dollar borrowings and at a rate of not less than Taiwan Interbank Offered Rate plus 0.9% for New Taiwan dollar borrowings. As of December 31, 2015, $9.4 million was outstanding under this credit facility.
On June 30, 2015, our Taiwan branch entered into a purchase and sale contract and a finance lease agreement together with the sale contract with Chailease Finance Co, Ltd. in connection with certain equipment, structured as a sale lease-back transaction. Pursuant to the sale contract, we sold certain equipment to Chailease and simultaneously leased the equipment back from Chailease pursuant to the finance lease agreement. The finance lease agreement has a three year term, with monthly lease payments, maturing on May 27 and June 30, 2018 respectively. The title to the equipment will be transferred to us upon the expiration of the finance lease agreement. As of December 31, 2015 and 2014 , $4.8 million and $0.4 million were outstanding under this finance lease agreement.
As of December 31, 2015, our China subsidiary had credit facilities with China Construction Bank totaling $22.3 million, which can be drawn in U.S. currency, RMB currency, issuing bank acceptance notes to vendors with different interest rates or issuing standby letters of credit. As of December 31, 2015, our China subsidiary used $10 million of its credit facility and issued standby letters of credit as collateral for our Taiwan branch line of credit with China Construction Bank. As of December 31, 2015, we had a U.S. currency based loan of $2.4 million outstanding under various notes with three-month terms, maturing from January to March 2016 with effective interest rate of 3.15%. As of December 31, 2014, we had $1.1 million outstanding various notes with three-month terms. The outstanding balances of bank acceptance notes issued to vendors were $3.0 million and $1.3 million with zero interest rate as of December 31, 2015 and 2014 respectively.
As of December 31, 2015 and 2014, there were $12.6 million and $ 8.7 million of restricted cash, investments or security deposit associated mainly with the loan facilities.
A customary business practice in China is for customers to exchange accounts receivable with notes receivable issued by their bank. From time to time we accept notes receivable from certain of our customers in China. These notes receivable are non-interest bearing and are generally due within nine months, and such notes receivable may be redeemed with the issuing bank prior to maturity at a discount. Historically, we have collected on the notes receivable in full at the time of maturity.
Frequently, we also direct our banking partners to issue bank acceptance notes payable to our suppliers in China in exchange for accounts payable. Our China subsidiary’s banks issue the notes to vendors and issue payment to vendors upon redemption. We owe the payable balance to the issuing bank. The notes payable are non-interest bearing and are generally due within nine months of issuance. As a condition of the notes payable lending arrangements, we are required to keep a compensating balance at the issuing banks that is a percentage of the total notes payable balance until the notes payable are paid by our China subsidiary. These balances are classified as restricted cash on our consolidated balance sheets.
Future liquidity needs
We believe that our existing cash and cash equivalents, and cash flows from our operating activities, will be sufficient to meet our anticipated cash needs for the next 12 months. Our future capital requirements will depend on many factors including our growth rate, the timing and extent of spending to support our research and development efforts, the expansion of our sales and marketing activities, the introduction of new and enhanced products, the expansion of our manufacturing capacity and the continuing market acceptance of our products. In the event that additional liquidity is required to meet our long-term investments, we may need to explore additional sources of liquidity by additional bank credit facilities or raising capital through additional equity or debt financing. The sale of additional equity or convertible securities could result in additional dilution to our stockholders, and the terms and prices of any such sale may not be acceptable to us. If we are unable to raise additional capital when desired, our business, operating results and financial condition would be adversely affected.
47 |
Contractual Obligations and Commitments
The following summarizes our contractual obligations as of December 31, 2015:
Payments due by period | ||||||||||||||||||||
Total | Less than 1 Year | 1-3 Years | 3-5 Years | More than 5 Years | ||||||||||||||||
(in thousands) | ||||||||||||||||||||
Notes payable and long-term debt(1) | $ | 67,903 | $ | 33,899 | $ | 24,827 | $ | 2,192 | $ | 6,985 | ||||||||||
Operating leases(2) | 13,221 | 1,009 | 2,601 | 2,939 | 6,673 | |||||||||||||||
Total commitments | $ | 81,124 | $ | 34,908 | $ | 27,428 | $ | 5,130 | $ | 13,657 |
____________
(1) | We have several loan and security agreements in China, Taiwan and the U.S. that provide various credit facilities, including lines of credit, bank acceptance payable and term loans. The amount presented in the table represents the principal portion of the obligations. |
(2) | We have entered into various non-cancellable operating lease agreements for our offices in Taiwan and the U.S. |
Inflation
We believe that the relatively low rate of inflation in the U.S. over the past few years has not had a significant impact on our sales or operating results or on the prices of raw materials. To the extent we expand our operations in China and Taiwan, such actions may result in inflation having a more significant impact on our operating results in the future.
Off-Balance Sheet Arrangements
During 2015, 2014 and 2013, we did not have any relationships with unconsolidated organizations or financial partnerships, such as structured finance or special purpose entities that would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes.
Critical Accounting Policies and Estimates
Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with U.S. GAAP. These principles require us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue, expenses and cash flows, and related disclosure of contingent assets and liabilities. Our estimates include those related to revenue recognition, share-based compensation expense, impairment analysis of goodwill and long-lived assets, valuation of inventory, warranty liabilities and accounting for income taxes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. Actual results may differ from these estimates. To the extent that there are material differences between these estimates and our actual results, our future financial statements will be affected.
We believe that of our significant accounting policies, which are described in Note B to our consolidated financial statements appearing elsewhere in this prospectus, the following accounting policies involve a greater degree of judgment and complexity. Accordingly, we believe these are the most critical to fully understand and evaluate our financial condition and results of operations.
Revenue recognition
We generally employ a direct sales model in North America, and in the rest of the world we use both direct and indirect channels. Our revenue recognition policy is to recognize gross revenue whether our products are sold on a direct or indirect basis, because our reseller customers (indirect channel) take title to our products and honor the same terms and conditions as do our direct sales customers. We recognize revenue from the sale of our products provided that persuasive evidence of an arrangement exists, performance obligations have been satisfied, the price is fixed or determinable and collectability is reasonably assured. Contracts or customer purchase orders are used to determine the existence of an arrangement. Shipping documents are used to verify delivery. We assess whether the price is fixed or determinable based on the payment terms associated with the transaction. We assess collectability based primarily on the creditworthiness of the customer as determined by credit checks and the customer’s payment history. Customers are generally extended net 30 credit terms from the date of shipment, with some extensions for some more creditworthy customers.
48 |
Whether our products are sold on a direct or indirect basis, revenue is recognized when the product is shipped and title has transferred to the customer. We bear all costs and risks of loss or damage to the goods up to that point. On most orders, our terms of sale provide that title passes to the customer upon placement by us with a common carrier (upon shipment). In some cases we may provide for title transfer to the customer upon delivery of the goods to the customer. We determine payments made to third party sales representatives are appropriately recorded to sales and marketing expense and not a reduction of revenue. Shipping and handling costs are included in cost of goods sold. We present revenue net of sales returns and allowances, sales taxes and any similar assessments. We provided a limited warranty as part of our standard terms and conditions of sale. This warranty provides for the repair or replacement of our products, at our discretion, that we determined (i) are defective in workmanship, material, or not in compliance with the mutually agreed written applicable specification and (ii) has in fact failed under normal use on or before one year from the date of original shipment of the products. Some of our customers are provided limited warranties between three to five years, on certain limited and identified products. Warranty costs associated with returned goods that are repaired or replaced are charged to cost of goods sold.
During our ordinary course of business, we may enter into new product development agreements to design, customize and develop new products for our customers. Such new product development agreements often involves material cost and engineering hours and therefore non-recurring engineering service (NRE) charges are agreed upon for the customer to reimburse our related costs. We adopt the milestone method in revenue recognition for NRE revenues by using cost-input measurement. We capitalize cost input up to the contractual agreement amount and recognize NRE revenues based upon the agreement schedule. Contracts or customer purchase orders are often used to determine the existence of service agreement.
Share-Based Compensation
Stock option fair value is calculated on the date of grant using the Black-Scholes valuation model. The compensation cost is then recognized on a straight-line basis over the requisite service period of the option, which is generally the option vesting term of four years. The Black-Scholes valuation model requires us to estimate key assumptions such as expected term, volatility, dividend yield and risk-free interest rates that determine the stock option fair value. In addition, we estimate forfeitures at the time of grant. As there had been no market for our common stock prior to our initial public offering, the expected volatility for options granted to date was derived from an analysis of reported data for a peer group of companies that issued options with similar terms. The expected volatility has been determined using an average of the expected volatility reported by this peer group of companies. We use a risk free interest rate based on the 10-year Treasury as reported during the period. The expected term of the options has been determined utilizing the simplified method which calculates a simple average based on vesting period and option life. We do not anticipate paying dividends in the near future. Estimated forfeitures are based on historical experience and future work force projections.
Long-lived assets
Depreciation and amortization of the intangible assets and other long-lived assets is provided using the straight-line method over their respective estimated useful lives, reflecting the pattern of economic benefits associated with these assets. Changes in circumstances such as technological advances, changes to our business model, or changes in our capital strategy could cause the actual useful lives of intangible assets or other long-lived assets to differ from initial estimates. In those cases where we determine that the useful life of an asset should be revised, we depreciate the remaining net book value over the new estimated useful life.
Our long-lived assets are evaluated for impairment whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable. We value on an asset-by-asset basis our long-lived assets and will recognize an impairment loss when the sum of such valuation is less than the carrying amount of such assets. The values, based on reasonable and supportable assumptions and projections, require subjective judgments. Depending on the assumptions and estimates used, the values projected in the evaluation of long-lived assets can vary within a range of outcomes. We consider the likelihood of possible outcomes in determining the best estimate for the value of the assets. We did not record any asset impairment charges in 2015 or 2014.
Valuation of inventories
Inventories are stated at the lower of cost (average-cost method) or market. Work in process and finished goods includes materials, labor and allocated overhead. We assess the valuation of our inventory on a periodic basis and provide an allowance for the value of estimated excess and obsolete inventory based on estimates of future demand. During the years ended December 31, 2015, 2014 and 2013, we recorded excess and obsolete inventory charges of $2.8 million, $0.9 million, and $0.5 million, respectively.
We have an accounting policy to write down value of obsolescence inventory.We considered the following factors in our determination of the appropriate reserve level: how often we buy material in bulk; the overall market value of raw material, semi-finished goods and finished goods across our varied product lines and within markets; changes in expected demand for our products; the change in valuations historically; the determined safety stock for key customers; and the likelihood of postponement in delivery schedules for materials already placed in finished goods inventory.
49 |
Accounting for income taxes
We account for income taxes in accordance with the provisions of ASC 740, Income Taxes. The liability method is used to account for deferred income taxes. Under the liability method, deferred tax assets and liabilities are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. The ability to realize deferred tax assets is evaluated annually and a valuation allowance is provided if it is unlikely that the deferred tax assets will not give rise to future benefits in our tax returns.
We record uncertain tax positions in accordance with ASC 740 on the basis of a two-step process in which (1) we determine whether it is more likely than not that the tax positions will be sustained on the basis of the technical merits of the position and (2) for those tax positions that meet the more-likely-than-not recognition threshold, we recognize the largest amount of tax benefit that is more than 50 percent likely to be realized upon ultimate settlement with the related tax authority.
We recognize interest and penalties related to unrecognized tax benefits on the income tax expense line in the accompanying consolidated statement of operations. Accrued interest and penalties are included on the related tax liability line in the consolidated balance sheet.
Recent Accounting Pronouncements
On February 25, 2016, the FASB released ASU 2016-02, Leases to complete its project to overhaul lease accounting. The ASU codifies ASC 842, Leases, which will replace the guidance in ASC 840. The new guidance will require lessees to recognize most leases on the balance sheet for capital and operating leases. The new guidance is effective for public business entities in fiscal years beginning after December 15, 2018. We are evaluating the impact of the accounting standard on our financial statements.
The FASB has issued Accounting Standards Update (ASU) No. 2016-01, Financial Instruments – Overall (Subtopic 825-10): Recognition and Measurement of Financial Assets and Financial Liabilities. The new guidance is intended to improve the recognition and measurement of financial instruments. The ASU affects public and private companies, not-for-profit organizations, and employee benefit plans that hold financial assets or owe financial liabilities. The new guidance is effective for public companies for fiscal years beginning after December 15, 2017, including interim periods within those fiscal years. For private companies, not-for-profit organizations, and employee benefit plans, the new guidance becomes effective for fiscal years beginning after December 15, 2018, and for interim periods within fiscal years beginning after December 15, 2019. We are evaluating the impact of the accounting standard on our financial statements.
The FASB issued ASU No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes during November 2015, which simplifies the presentation of deferred income taxes. This ASU provides presentation requirements to classify deferred tax assets and liabilities as noncurrent in a statement of financial position. The standard is effective for fiscal years beginning after December 15, 2016, including interim periods within that reporting period. Early adoption is permitted for any interim and annual financial statements that have not yet been issued. The ASU may be applied either prospectively to all deferred tax liabilities and assets or retrospectively to all periods presented. We early adopted this standard effective December 31, 2015 on a retrospective basis which resulted in a reclassification of our net current deferred tax asset to the net non-current deferred tax asset as of December 31, 2015. The adoption of this ASU had no impact on the balance sheet or income statement as we had a full valuation allowance.
The FASB has issued Accounting Standards Update (ASU) No. 2015-11, Inventory in July 2015 to require entity to measure inventory at the lower of cost or market. Market could be replacement cost, net realizable value, or net realizable value less an approximately normal profit margin. The Company adopted this ASU which had no material impact on our financial statements.
In April 2015, the FASB issued ASU No. 2015-03, Interest - Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt Issuance Costs, which requires the presentation of debt issuance costs related to a recognized debt liability as a direct deduction from the carrying amount of that debt liability. ASU 2015-03 does not address presentation or subsequent measurement of debt issuance costs related to line-of-credit arrangements. Given the absence of authoritative guidance within ASU 2015-03 for debt issuance costs related to line-of-credit arrangements, the SEC staff would not object to an entity deferring and presenting debt issuance costs as an asset and subsequently amortizing the deferred debt issuance costs ratably over the term of the line-of-credit arrangement, regardless of whether there are any outstanding borrowings on the line-of-credit arrangement. We are evaluating the impact of the accounting standard on our financial statements.
50 |
In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606). The amendments in ASU 2015-14 defer the effective date of ASU 2014-09 for all entities by one year. Public business entities should apply the guidance in ASU 2014-09 to annual reporting periods beginning after December 15, 2017, including interim reporting periods within that reporting period. Earlier application is permitted only as of annual reporting periods beginning after December 15, 2016, including interim reporting periods within that reporting period. We are evaluating the impact of the accounting standard on our financial statements.
Item 7A. Quantitative and Qualitative Disclosures about Market Risk
Market Risks
Market risk represents the risk of loss that may impact our financial statements through adverse changes in financial market prices and rates and inflation. Our market risk exposure results primarily from fluctuations in foreign exchange and interest rates. We manage our exposure to these market risks through our regular operating and financing activities. We have not historically attempted to reduce our market risks through hedging instruments; we may, however, do so in the future.
Interest Rate Fluctuation Risk
Our cash equivalents consisted primarily of money market funds, and interest and non-interest bearing bank deposits. Our primary objective is to maintain the security of our principal balances and ensure liquidity. We attempt to maximize the return on these balances without significantly increasing risk, but have little opportunity to do so given the short-term nature of our investments and current interest rate environments. We do not anticipate any material effect on our cash balances or investment portfolio due to fluctuations in interest rates.
We are exposed to market risk due to the possibility of changing interest rates associated with certain debt instruments. As of December 31, 2015, our U.S. debt bears a variable rate of interest that is based on LIBOR. The debt subject to variable rates is subject to fluctuation in the LIBOR. As of December 31, 2015, the interest on our China debt varied based on when each term loan is drawn. Once drawn the interest remains fixed for the term of that draw. As of December 31, 2015, we had not hedged our interest rate risk.
With respect to our interest expense for the three months ended December 31, 2015, an increase of 1.0% in each of our interest rates would have resulted in an increase of $0.6 million in our interest expense for such period.
Foreign Exchange Rates
We operate on an international basis with a large portion of our business conducted in our Taiwan branch and China subsidiary. We use the U.S. dollar as our reporting currency for our consolidated financial statements. The financial records of our China subsidiary and our Taiwan branch are maintained in their respective local currencies, the RMB and the NT dollar, which are the functional currencies for our China subsidiary and our Taiwan branch, respectively. Assets and liabilities are translated at prevailing exchange rates at the balance sheet date, equity accounts are translated at historical exchange rates and revenues, expenses, gains and losses are translated using the average rate for the then current period using a monthly average. Translation adjustments are reported as cumulative translation adjustments and are shown as a separate component of accumulated other comprehensive income in our statement of stockholders’ equity (deficit) and comprehensive income.
All transactions in currencies other than their functional currencies during the year are subject to foreign exchange risk when the exchange rate fluctuates on the respective relevant dates of such transactions. Transaction gains and losses are recognized in our statements of operations in other income (expense). Monetary assets and liabilities existing at the balance sheet date denominated in currencies other than the functional currencies are re-measured at the exchange rates prevailing on the Balance Sheet date and unrealized exchange differences are recorded in our consolidated income statement. In October 2015, we determined that certain US loan to foreign subsidiaries are long-term investments. Therefore, exchange gain/(loss) arising from re-measurement of US loans were recorded in the Cumulative Translation Adjustment accounts.
During the year ended December 31, 2015, we recognized $0.7 million of realized exchange gain arising from foreign currency transactions and $2.6 million of unrealized exchange losses arising from re-measurement of monetary assets and liabilities dominated in non-functional currency on balance sheet date.
51 |
During the year ended December 31, 2015, 1.75% of our revenue was denominated in RMB and less than 1% of revenue was denominated in NT dollars. In the year ended December 31, 2015, 17.4% of our operating expenses were denominated in RMB and 33.9% of our operating expenses were denominated in NT dollars. Accordingly, fluctuations in exchange rates directly affect our cost of goods sold and net income, and have a significant impact on our operating margins. If exchange rates of RMB and NT dollars for U.S. dollars were 1% higher during the year ended December 31, 2015, our operating expenses would have been higher by $0.2 million.
As of December 31, 2015, we held the U.S. dollar denominated liabilities net of assets of approximately $9.5 million in our China subsidiary and $4.75 million in our Taiwan branch. With respect these U.S. Dollar denominated net liabilities as of December 31, 2015, if exchange rates of RMB and NT dollars for U.S. dollars were 1.0% higher during the year ended December 31, 2015, our other operating expenses would have been $0.05 million and $0.09 million higher, respectively. Any significant revaluation of the RMB and NT dollars may materially and adversely affect the cash flows, revenues, and net income as reported in U.S. Dollars.
We currently do not use derivative financial instruments to mitigate this exposure. We continue to review this issue and may consider hedging certain foreign exchange risks through the use of currency forwards or options in future years.
Item 8. | Financial Statements and Supplementary Data |
The information required by this item is incorporated by reference to the consolidated financial statements and accompanying notes set forth on pages F-1 through F-27 of this Annual Report on Form 10-K
Item 9. | Changes in and Disagreements with Accountants on Accounting and Financial Disclosure Not applicable. |
Item 9A. | Controls and Procedures |
a. | Evaluation of Disclosure Controls and Procedures. |
The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Our disclosure controls and procedures are designed to provide reasonable assurance of achieving their control objectives.
Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of December 31, 2015. Based upon that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of the end of the period covered in this report, our disclosure controls and procedures were effective.
b. | Management’s Annual Report on Internal Control Over Financial Reporting. |
Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act). Internal control over financial reporting is a process designed by, or under the supervision of, the issuer’s principal executive and principal financial officers, or persons performing similar functions, and effected by the issuer’s board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company’s assets that could have a material effect on the financial statements. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that our degree of compliance with the policies or procedures may deteriorate.
52 |
Our management conducted an evaluation of the effectiveness of our internal control over financial reporting as of the end of the period covered by this Annual Report on Form 10-K based on the framework in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organization of the Treadway Commission. Based on this evaluation, management concluded that our internal control over financial reporting was effective as of December 31, 2015.
This annual report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit the Company to provide only management’s report in this annual report.
c. | Changes in Internal Control over Financial Reporting |
There was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) identified in connection with management’s evaluation required by the Rules 13a-15(d) and 15d-15(d) under the Exchange Act that occurred during our last fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
Item 9B. | Other Information Not applicable. |
53 |
PART III
Item 10. | Directors, Executive Officers and Corporate Governance |
The information required regarding our directors is incorporated herein by reference from the information contained in our definitive Proxy Statement for the 2016 Annual Meeting of Stockholders (our “Proxy Statement”), a copy of which will be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended December 31, 2015.
The information required regarding our executive officers is incorporated herein by reference from the information contained in the section entitled “Management” in our Proxy Statement.
The information required regarding Section 16(a) beneficial ownership reporting compliance is incorporated by reference from the information contained in our Proxy Statement.
The information required with respect to procedures by which security holders may recommend nominees to our board of directors, the composition of our Audit Committee, and whether the Company has an “audit committee financial expert”, is incorporated by reference from the information contained in our Proxy Statement.
Adoption of Code of Ethics
The Company has adopted a Code of Business Conduct and Ethics (the “Code”) applicable to all of our board of director members, employees and executive officers, including our Chief Executive Officer (Principal Executive Officer), and Chief Financial Officer (Principal Financial Officer and Principal Accounting Officer). The Company has made the Code available on our website at http://www.ao-inc.com.
The Company intends to satisfy the public disclosure requirements regarding (1) any amendments to the Code, or (2) any waivers under the Code given to our Principal Executive Officer, Principal Financial Officer and Principal Accounting Officer by posting such information on our website at www.ao-inc.com. There were no amendments to the Code or waivers granted thereunder relating to the Principal Executive Officer, Principal Financial Officer or Principal Accounting Officer during 2015.
Item 11. | Executive Compensation |
The information required regarding the compensation of our directors and executive officers is incorporated herein by reference from the information contained in the sections entitled “Executive Compensation,” and “Director Compensation,” “Compensation Committee Report” in our Proxy Statement.
Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters |
The information required regarding security ownership of our 5% or greater stockholders and of our directors and management is incorporated herein by reference from the information contained in the section entitled “Security Ownership of Certain Beneficial Owners and Management” in our Proxy Statement.
The information required regarding securities authorized for issuance our equity compensation plans is incorporated herein by reference from the information contained in the section entitled “Employee Benefit Plans” in our Proxy Statement.
Item 13. | Certain Relationships and Related Transactions, and Director Independence |
The information required regarding related transactions is incorporated herein by reference from the information contained in our Proxy Statement.
Item 14. | Principal Accounting Fees and Services |
The information required by Part III, Item 14, regarding principal accounting fees and services is incorporated by reference from the information contained in our Proxy Statement, a copy of which will be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended December 31, 2015.
54 |
Part IV
Item 15. | Exhibits, Financial Statements Schedules |
(a) Exhibits.
See the Exhibit Index which follows the signature page of this Annual Report on Form 10-K, which is incorporated herein by reference.
(b) Financial Statement Schedules.
Financial statement schedules have been omitted, as the information required to be set forth therein is included in the Consolidated Financial Statements or Notes thereto appearing in this Annual Report on Form 10-K.
55 |
SIGNATURES
Pursuant to the requirements of the Securities and Exchange Act of 1934, the registrant has duly caused this Form 10-K to be signed on its behalf by the undersigned, thereunto duly authorized, on March 14, 2016.
APPLIED OPTOELECTRONICS, INC. | ||
By: |
/s/ Chih-Hsiang (Thompson) Lin Chih-Hsiang
(Thompson) Lin, |
March 14, 2016
POWER OF ATTORNEY
KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Chih-Hsiang (Thompson) Lin and Stefan J. Murry, and each of them, jointly and severally, his attorneys-in-fact, each with the power of substitution, for him in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities and Exchange Act of 1934, this Form 10-K has been signed by the following persons in the capacities and on the dates indicated.
Signature | Date |
/s/ Chih-Hsiang (Thompson) Lin Chih-Hsiang (Thompson) Lin, President,
Chief Executive Officer and (principal executive officer) |
March 14, 2016 |
/s/ STEFAN J. MURRY Stefan J. Murry, Chief Financial Officer (principal financial officer and principal accounting officer) |
March 14, 2016 |
56 |
Signature | Date |
/s/ William H. Yeh William H. Yeh, Director |
March 14, 2016 |
/s/ Richard B. Black Richard B. Black, Director |
March 14, 2016 |
/s/ Che-Wei Lin Che-Wei Lin, Director |
March 14, 2016 |
/s/ Alex Ignatiev Alex Ignatiev, Director |
March 14, 2016 |
/s/ Alan Moore Alan Moore, Director |
March 14, 2016 |
/s/ Min-Chu (Mike) Chen Min-Chu (Mike) Chen, Director |
March 14, 2016 |
57 |
EXHIBIT INDEX
Incorporated by Reference | ||||||
Number |
Exhibit Description |
Form |
File No. |
Exhibit |
Filing Date | |
3.1 | Amended and Restated Certificate of Incorporation of the registrant, as currently in effect | 10-Q | 001-36083 | 3.1 | November 14, 2013 | |
3.2 | Amended and Restated Bylaws of the registrant, as currently in effect | 10-Q | 001-36083 | 3.2 | November 14, 2013 | |
4.1 | Form of Registration Rights Agreement | S-1 | 333-190591 | 4.1 | August 13, 2013 | |
4.2 | Form of Shareholders’ Agreement | S-1 | 333-190591 | 4.2 | August 13, 2013 | |
4.3 | Common Stock Specimen | 8-K | 001-36083 | 4.1 | July 15, 2015 | |
10.1 | Form of Indemnification Agreement between the registrant each of its Directors and certain of its Executive Officers | S-1 | 333-190591 | 10.1 | August 13, 2013 | |
10.2 | † | 1998 Incentive Share Plan | S-1 | 333-190591 | 10.2 | August 13, 2013 |
10.2.1 | † | Form of Stock Option Agreement under 1998 Incentive Share Plan | S-1 | 333-190591 | 10.2.1 | August 13, 2013 |
10.2.2 | † | Form of Stock Option Agreement under 1998 Incentive Share Plan | S-1 | 333-190591 | 10.2.2 | August 13, 2013 |
10.3 | † | 2000 Incentive Share Plan | S-1 | 333-190591 | 10.3 | August 13, 2013 |
10.3.1 | † | Form of Stock Option Agreement under 2000 Incentive Share Plan | S-1 | 333-190591 | 10.3.1 | August 13, 2013 |
10.3.2 | † | Form of Stock Option Agreement under 2000 Incentive Share Plan | S-1 | 333-190591 | 10.3.2 | August 13, 2013 |
10.4 | † | 2004 Incentive Share Plan | S-1 | 333-190591 | 10.4 | August 13, 2013 |
10.4.1 | † | Form of Stock Option Agreement under 2004 Incentive Share Plan | S-1 | 333-190591 | 10.4.1 | August 13, 2013 |
10.5 | † | 2006 Incentive Share Plan | S-1 | 333-190591 | 10.5 | August 13, 2013 |
10.5.1 | † | First Amendment to 2006 Incentive Share Plan | S-1/A | 333-190591 | 10.5.1 | August 27, 2013 |
10.5.2 | † | Form of Stock Option Agreement under 2006 Incentive Share Plan | S-1/A | 333-190591 | 10.5.2 | August 27, 2013 |
10.6 | † | 2013 Equity Incentive Plan | 10-Q | 001-36083 | 10.1 | November 14, 2013 |
10.6.1 | † | Form of Restricted Stock Award Agreement under 2013 Equity Incentive Plan | S-1 | 333-190591 | 10.6.1 | August 13, 2013 |
58 |
Incorporated by Reference | ||||||
Number |
Exhibit Description |
Form |
File No. |
Exhibit |
Filing Date | |
10.6.2 | † | Form of Restricted Stock Unit Award Agreement under 2013 Equity Incentive Plan | S-1 | 333-190591 | 10.6.2 | August 13, 2013 |
10.6.3 | † | Form of Stock Appreciation Right Award Agreement under 2013 Equity Incentive Plan | S-1 | 333-190591 | 10.6.3 | August 13, 2013 |
10.6.4 | † | Form of Notice of Stock Option Award and Stock Option Award Agreement under 2013 Equity Incentive Plan | S-1 | 333-190591 | 10.6.4 | August 13, 2013 |
10.7 | Lease Agreement effective May 1, 2012 between the registrant and 12808 W. Airport, LLC | S-1 | 333-190591 | 10.7 | August 13, 2013 | |
10.7.1 | First Amendment to Lease Agreement effective June 15, 2012 between the registrant and 12808 W. Airport, LLC | S-1 | 333-190591 | 10.7.1 | August 13, 2013 | |
10.7.2 | Third Amendment to Office Lease Agreement between the Applied Optoelectronics, Inc. and 12808 Airport, LLC dated July 21, 2014 | 8-K | 001-36083 | 10.1 | July 25, 2014 | |
10.8 | Translation of Chinese lease agreement dated January 10, 2012 between the registrant and Admiral Overseas Corporation for space on 4F, NO.700, Jhongjheng Rd., Jhonghe District, New Taipei City 23552, Taiwan (R.O.C.) | S-1 | 333-190591 | 10.8 | August 13, 2013 | |
10.8.1 | Translation of Chinese Amendment to Office Lease Agreement dated August 28, 2013 between the registrant and Admiral Overseas Corporation for space on 4F, No.700, Jhongjheng Rd., Jhonghe District, New Taipei City 23552, Taiwan (R.O.C.) | 10-Q | 001-36083 | 10.4 | November 14, 2013 | |
10.9 | Translation of Chinese lease agreement dated April 1, 2012 between the registrant and Admiral Overseas Corporation for space on 6-7F, NO.700, Jhongjheng Rd., Jhonghe District, New Taipei City 23552, Taiwan (R.O.C.) | S-1 | 333-190591 | 10.9 | August 13, 2013 | |
10.9.1 | Translation of Chinese Amendment to Office Lease Agreement dated August 28, 2013 between the registrant and Admiral Overseas Corporation for space on 6-7F, No.700, Jhongjheng Rd., Jhonghe District, New Taipei City 23552, Taiwan (R.O.C.) | 10-Q | 001-36083 | 10.5 | November 14, 2013 |
59 |
Incorporated by Reference | ||||||
Number |
Exhibit Description |
Form |
File No. |
Exhibit |
Filing Date | |
10.10 | Translation of Chinese lease agreement dated September 11, 2013 between the registrant and Admiral Overseas Corporation for space on 5F, No.700, Jhongjheng Rd., Jhonghe District, New Taipei City 23552, Taiwan (R.O.C.) | 10-Q | 001-36083 | 10.3 | November 14, 2013 | |
10.11 | Amended and Restated Loan and Security Agreement effective May 20, 2009 between registrant and United Commercial Bank | S-1 | 333-190591 | 10.10 | August 13, 2013 | |
10.11.1 | First Amendment to Amended and Restated Loan and Security Agreement effective May 3, 2010 between the registrant and East West Bank (as successor in interest to United Commercial Bank) | S-1 | 333-190591 | 10.10.1 | August 13, 2013 | |
10.11.2 | Second Amendment to Amended and Restated Loan and Security Agreement effective October 28, 2010 between the registrant and East West Bank | S-1 | 333-190591 | 10.10.2 | August 13, 2013 | |
10.11.3 | Third Amendment to Amended and Restated Loan and Security Agreement effective December 6, 2010 between the registrant and East West Bank | S-1 | 333-190591 | 10.10.3 | August 13, 2013 | |
10.11.4 | Fourth Amendment to Amended and Restated Loan and Security Agreement effective May 5, 2011 between the registrant and East West Bank | S-1 | 333-190591 | 10.10.4 | August 13, 2013 | |
10.11.5 | Fifth Amendment to Amended and Restated Loan and Security Agreement effective November 30, 2011 between the registrant and East West Bank | S-1 | 333-190591 | 10.10.5 | August 13, 2013 | |
10.11.6 | Sixth Amendment to Amended and Restated Loan and Security Agreement effective March 29, 2012 between the registrant and East West Bank | S-1 | 333-190591 | 10.10.6 | August 13, 2013 | |
10.11.7 | Seventh Amendment to Amended and Restated Loan and Security Agreement effective June 29, 2012 between the registrant and East West Bank | S-1 | 333-190591 | 10.10.7 | August 13, 2013 |
60 |
Incorporated by Reference | ||||||
Number |
Exhibit Description |
Form |
File No. |
Exhibit |
Filing Date | |
10.11.8 | Eighth Amendment to Amended and Restated Loan and Security Agreement effective November 2, 2012 between the registrant and East West Bank | S-1 | 333-190591 | 10.10.8 | August 13, 2013 | |
10.11.9 | Ninth Amendment to Amended and Restated Loan and Security Agreement effective April 11, 2013 between the registrant and East West Bank | S-1 | 333-190591 | 10.10.9 | August 13, 2013 | |
10.11.10 | Tenth Amendment to Amended and Restated Loan and Security Agreement effective September 10, 2013 between the registrant and East West Bank | S-1/A | 333-190591 | 10.10.10 | September 11, 2013 | |
10.11.11 | Eleventh Amendment to Amended and Restated Loan and Security Agreement effective November 13, 2013 between the registrant and East West Bank | 8-K | 001-36083 | 10.1 | November 19, 2013 | |
10.11.12 | Twelfth Amendment to Amended and Restated Loan and Security Agreement effective December 11, 2013 between the registrant and East West Bank | 8-K | 001-36083 | 10.1 | December 17, 2013 | |
10.11.13 | Translation of Chinese form of RMB Working Capital Loan Agreement between the Global Technology Inc. and China Construction Bank | 10-K | 001-36083 | 10.11.13 | March 6, 2014 | |
10.12 | Translation of Chinese form of USD Trust Receipt Loan Agreement between Global Technology Inc. and China Construction Bank | 10-K | 001-36083 | 10.11.12 | March 6, 2014 | |
10.13 | Translation of Chinese Loan Agreement dated December 31, 2013 between the registrant and E. Sun Commercial Bank Co., Ltd. | 10-K | 001-36083 | 10.13 | March 6, 2014 | |
10.14 | Translation of Chinese Loan Agreement dated December 20, 2013 between the registrant and Mega International Commercial Bank Co., Ltd. | 10-K | 001-36083 | 10.14 | March 6, 2014 |
61 |
Incorporated by Reference | ||||||
Number |
Exhibit Description |
Form |
File No. |
Exhibit |
Filing Date | |
10.15 | † | Employment Agreement regarding Change of Control or Separation of Service between the registrant and Chih-Hsiang (Thompson) Lin, dated January 28, 2007 | S-1 | 333-190591 | 10.12 | August 13, 2013 |
10.15.1 | † | Amended and Restated Employment Agreement regarding Change of Control or Separation of Service between the registrant and Chih-Hsiang (Thompson) Lin, dated April 16, 2013 | S-1 | 333-190591 | 10.12.1 | August 13, 2013 |
10.15 | † | Employment Agreement regarding Change of Control or Separation of Service between the registrant and Stefan J. Murry, dated January 28, 2007 | S-1 | 333-190591 | 10.13 | August 13, 2013 |
10.16 | † | Employment Agreement regarding Change of Control or Separation of Service between the registrant and Shu-Hua (Joshua) Yeh, dated June 1, 2012 | S-1 | 333-190591 | 10.14 | August 13, 2013 |
10.17 | † | Employment Agreement between the registrant and James L. Dunn, Jr., dated April 16, 2013 | S-1 | 333-190591 | 10.15 | August 13, 2013 |
10.18 | † | Employment Agreement between the registrant and Hung-Lun (Fred) Chang, dated April 16, 2013 | S-1 | 333-190591 | 10.16 | August 13, 2013 |
10.19 | Translation of Lease Agreement dated March 18, 2014 between the Company and Taiwan Furniture Manufacturers’ Association for office space at 2F, No. 700, Jhongjheng Rd., Jhonghe District, New Taipei City 23552, Taiwan (R.O.C.). | 8-K | 001-36083 | 1.2 | March 25, 2014 | |
10.20 | Translation of Lease Agreement dated April 1, 2014 between the Company and Taiwan Asset Management Corporation for office and manufacturing space at No. 18, Gong 4th Rd., Gong’er Industrial Park, Linkou District, New Taipei City 244, Taiwan (R.O.C.) | 8-K | 001-36083 | 1.01 | April 7, 2014 | |
10.21 | Business Loan Agreement, dated July 15, 2014, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.1 | July 18, 2014 | |
10.21.1 | Commercial Security Agreement, dated July 15, 2014, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.2 | July 18, 2014 | |
10.21.2 | Promissory Note, dated July 15, 2014, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.3 | July 18, 2014 |
62 |
Incorporated by Reference | ||||||
Number |
Exhibit Description |
Form |
File No. |
Exhibit |
Filing Date | |
10.22 | Business Loan Agreement, dated July 31, 2014, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.1 | August 5, 2014 | |
10.22.1 | Commercial Security Agreement, dated July 31, 2014, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.2 | August 5, 2014 | |
10.22.2 | Promissory Note, dated July 31, 2014, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.3 | August 5, 2014 | |
10.23 | Translation of Chinese form of RMB Working Capital Loan Agreement between the Global Technology Inc. and China Construction Bank – Revolving line of credit with a China bank up to $12 million (Schedule updated as of June 30, 2014) | 10-Q | 001-36083 | 10.2 | August 12, 2014 | |
10.24 | Translation of Chinese form of USD Trust Receipt Loan Agreement between Global Technology Inc. and China Construction Bank - Revolving line of credit with a China bank up to $3.3 million (Schedule updated as of June 30, 2014) | 10-Q | 001-36083 | 10.3 | August 12, 2014 | |
10.25 | Translation of Chinese form of RMB Working Capital Loan Agreement between the Global Technology Inc. and China Construction Bank – Revolving line of credit with a China bank up to $12 million (Schedule updated as of September 30, 2014) | 10-Q | 001-36083 | 10.4 | November 12, 2014 | |
10.26 | Translation of Chinese form of USD Trust Receipt Loan Agreement between Global Technology Inc. and China Construction Bank - Revolving line of credit with a China bank up to $3.3 million (Schedule updated as of September 30, 2014) | 10-Q | 001-36083 | 10.5 | November 12, 2014 | |
10.27 | Loan Agreement, dated January 6, 2015, between Applied Optoelectronics, Inc. and CTBC Bank Co. Ltd. | 8-K | 001-36083 | 10.1 | January 12, 2015 | |
10.28 | Construction Loan Agreement, dated January 26, 2015, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.1 | January 30, 2015 | |
10.28.1 | Commercial Security Agreement, dated January 26, 2015, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.2 | January 30, 2015 | |
10.28.2 | Promissory Note, dated January 26, 2015, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.3 | January 30, 2015 |
63 |
Incorporated by Reference | ||||||
Number |
Exhibit Description |
Form |
File No. |
Exhibit |
Filing Date | |
10.29 | Translation of Chinese form of RMB Working Capital Loan Agreement between the Global Technology Inc. and China Construction Bank – Revolving line of credit with a China bank up to $12 million (Schedule updated as of December 31, 2014) | 10-K | 001-36083 | 10.29 | March 5, 2015 | |
10.30 | Translation of Chinese form of USD Trust Receipt Loan Agreement between Global Technology Inc. and China Construction Bank - Revolving line of credit with a China bank up to $3.3 million (Schedule updated as of December 31, 2014) | 10-K | 001-36083 | 10.30 | March 5, 2015 | |
10.31 | Translation of $4 Million Credit Facility Agreement, dated March 9, 2015, between Applied Optoelectronics, Inc. and E. Sun Commercial Bank Co., Ltd. | 8-K | 001-36083 | 10.1 | March 13, 2015 | |
10.31.1 | Translation of $3 Million Credit Facility Agreement, dated March 9, 2015, between Applied Optoelectronics, Inc. and E. Sun Commercial Bank Co., Ltd. | 8-K | 001-36083 | 10.2 | March 13, 2015 | |
10.31.2 | Translation of Loan Approval Notice of E. Sun Commercial Bank Co., Ltd., dated March 12, 2015 | 8-K | 001-36083 | 10.3 | March 13, 2015 | |
10.32 | Translation of US$4 Million Credit Facility Agreement, dated March 25, 2015, between Applied Optoelectronics, Inc. and Mega International Commercial Bank Co., Ltd | 8-K | 001-36083 | 10.1 | March 31, 2015 | |
10.33 | Translation of Comprehensive Credit Line Contract and General Agreement, dated April 1, 2015, between Applied Optoelectronics, Inc., Taiwan Branch, and China Construction Bank, Taipei Branch | 8-K | 001-36083 | 10.1 | April 7, 2015 | |
10.33.1 | Translation of Approval Notice of China Construction Bank, Taipei Branch | 8-K | 001-36083 | 10.2 | April 7, 2015 | |
10.34 | Translation of Purchase and Sale Contract between Applied Optoelectronics, Inc., Taiwan Branch, and Chailease Finance Co., Ltd. | 8-K | 001-36083 | 10.1 | June 2, 2015 | |
10.34.1 | Translation of Finance Lease Agreement between Applied Optoelectronics, Inc., Taiwan Branch, and Chailease Finance Co., Ltd. | 8-K | 001-36083 | 10.2 | June 2, 2015 | |
10.35 | Fourth Amendment to Office Lease Agreement between Applied Optoelectronics, Inc. and 12808 Airport, LLC dated June 17, 2015 | 8-K | 001-36083 | 10.1 | June 23, 2015 | |
10.36 | Credit Agreement, dated June 30, 2015, among Applied Optoelectronics, Inc., East West Bank and Comerica Bank | 8-K | 001-36083 | 10.1 | July 7, 2015 | |
10.36.1 | Security Agreement, dated June 30, 2015, among Applied Optoelectronics, Inc., East West Bank and Comerica Bank | 8-K | 001-36083 | 10.2 | July 7, 2015 | |
10.36.2 | Patent Security Agreement, dated June 30, 2015, among Applied Optoelectronics, Inc., East West Bank and Comerica Bank | 8-K | 001-36083 | 10.3 | July 7, 2015 | |
10.36.3 | Trademark Security Agreement, dated June 30, 2015, among Applied Optoelectronics, Inc., East West Bank and Comerica Bank | 8-K | 001-36083 | 10.4 | July 7, 2015 | |
10.36.4 | East West Bank Promissory Note, dated June 30, 2015, between Applied Optoelectronics, Inc. and East West Bank | 8-K | 001-36083 | 10.5 | July 7, 2015 | |
10.36.5 | Comerica Bank Promissory Note, dated June 30, 2015, between Applied Optoelectronics, Inc. and Comerica Bank | 8-K | 001-36083 | 10.6 | July 7, 2015 |
64 |
10.36.6 | 2nd Lien Construction Deed of Trust, dated June 30, 2015, among Applied Optoelectronics, Inc., East West Bank and Comerica Bank | 8-K | 001-36083 | 10.7 | July 7, 2015 | |
10.37 | Translation of Purchase and Sale Contract between Applied Optoelectronics, Inc., Taiwan Branch, and Chailease Finance Co., Ltd. | 8-K | 001-36083 | 10.1 | July 7, 2015 | |
10.37.1 | Translation of Finance Lease Agreement and Promissory Note between Applied Optoelectronics, Inc., Taiwan Branch, and Chailease Finance Co., Ltd. | 8-K | 001-36083 | 10.2 | July 7, 2015 | |
10.38 | Office Lease Agreement between Applied Optoelectronics, Inc. and GIG VAOI Breckinridge, LLC dated November 5, 2015 | 10-Q | 001-36083 | 10.1 | November 9, 2015 | |
10.39 | † | Applied Optoelectronics, Inc. Executive and Key Employee Bonus Plan | 8-K | 001-36083 | 10.1 | December 21, 2015 |
10.40 | Translation of US$2Million Credit Facility Agreement, dated December 22, 2015, between Applied Optoelectronics, Inc. and Mega International Commercial Bank Co., Ltd. | 8-K | 001-36083 | 10.1 | December 29, 2015 | |
10.41 | Translation of US$4 Million Credit Facility Agreement, dated December 22, 2015, between Applied Optoelectronics, Inc. and Mega International Commercial Bank Co., Ltd. | 8-K | 001-36083 | 10.1 | December 29, 2015 | |
21.1 | Subsidiaries of the registrant | S-1 | 333-190591 | 21.1 | August 13, 2013 | |
23.1 | * | Consent of Grant Thornton LLP | ||||
24.1 | Power of Attorney (see page 56 to this Annual Report on Form 10-K). | |||||
31.1 | * | Certification of Principal Executive Officer Required Under Rule 13a-14(a) and 15d-14(a) of the Securities Exchange Act of 1934, as amended, as adopted pursuant to Section 302 of The Sarbanes-Oxley Act of 2002. | ||||
31.2 | * | Certification of Principal Financial Officer Required Under Rule 13a-14(a) and 15d-14(a) of the Securities Exchange Act of 1934, as amended, as adopted pursuant to Section 302 of The Sarbanes-Oxley Act of 2002. | ||||
32.1 | * | Certification of Principal Executive Officer and Principal Financial Officer Required Under Rule 13a-14(a) and 15d-14(a) of the Securities Exchange Act of 1934, as amended, and 18 U.S.C. §1350 as adopted pursuant to Section 906 of The Sarbanes-Oxley Act of 2002. |
65 |
101.INS | ** | XBRL Instance Document | ||||
101.SCH | ** | XBRL Taxonomy Extension Schema Document | ||||
101.CAL | ** | XBRL Taxonomy Extension Calculation Linkbase Document | ||||
101.DEF | ** | XBRL Taxonomy Extension Definition Linkbase Document | ||||
101.LAB | ** | XBRL Taxonomy Extension Label Linkbase Document | ||||
101.PRE | ** | XBRL Taxonomy Extension Presentation Linkbase Document |
__________________
* | Filed herewith. |
** | The financial information contained in these XBRL documents is unaudited and these are not the official publicly filed financial statements of Applied Optoelectronics, Inc. The purpose of submitting these XBRL documents is to test the related format and technology, and, as a result, investors should continue to rely on the official filed version of the furnished documents and not rely on this information in making investment decisions. In accordance with Rule 402 of Regulation S-T, the information in these exhibits shall not be deemed to be “filed” for purposes of Section 18 of the Exchange Act, or otherwise subject to the liability of that section, and shall not be incorporated by reference into any registration statement or other document filed under the Securities Act, or the Exchange Act, except as shall be expressly set forth by specific reference in such filing. |
† | Management contract, compensatory plan or arrangement. |
66 |
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Pages | |
Report of Independent Registered Public Accounting Firm | F-2 |
Consolidated Balance Sheets | F-3 |
Consolidated Statements of Operations | F-4 |
Consolidated Statements of Comprehensive Income (Loss) | F-5 |
Consolidated Statements of Stockholders’ Equity | F-6 |
Consolidated Statements of Cash Flows | F-7 |
Notes to Consolidated Financial Statements | F-8 |
F-1 |
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
Board of Directors and Shareholders
Applied Optoelectronics, Inc.
We have audited the accompanying consolidated balance sheets of Applied Optoelectronics, Inc. (a Delaware corporation) and subsidiaries (the “Company”) as of December 31, 2015 and 2014, and the related consolidated statements of operations, comprehensive income (loss), changes in stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2015. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. We were not engaged to perform an audit of the Company’s internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Applied Optoelectronics, Inc. and subsidiaries as of December 31, 2015 and 2014, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2015 in conformity with accounting principles generally accepted in the United States of America.
/s/ GRANT THORNTON LLP
Houston, TX
March 14, 2016
F-2 |
Applied Optoelectronics, Inc. and Subsidiaries
CONSOLIDATED BALANCE SHEETS
(in thousands, except per share data)
December 31, | ||||||||
2015 | 2014 | |||||||
ASSETS | ||||||||
Current Assets | ||||||||
Cash and cash equivalents | $ | 28,074 | $ | 32,175 | ||||
Restricted cash | 4,719 | 509 | ||||||
Short-term investments | 7,886 | 8,189 | ||||||
Accounts receivable - trade, net of allowance of $51 and $43, respectively | 38,775 | 31,589 | ||||||
Inventories | 66,238 | 33,780 | ||||||
Notes receivable | – | 980 | ||||||
Prepaid expenses and other current assets | 8,236 | 6,017 | ||||||
Total current assets | 153,928 | 113,239 | ||||||
Property, plant and equipment, net of accumulated depreciation of $37,980 and $32,412, respectively | 109,699 | 64,808 | ||||||
Land use rights, net | 854 | 930 | ||||||
Intangible assets, net | 3,900 | 3,833 | ||||||
Other assets, net | 5,094 | 860 | ||||||
TOTAL ASSETS | $ | 273,475 | $ | 183,670 | ||||
LIABILITIES AND STOCKHOLDERS' EQUITY | ||||||||
Current liabilities | ||||||||
Current portion of notes payable and long-term debt | $ | 30,908 | $ | 9,591 | ||||
Accounts payable | 28,668 | 30,984 | ||||||
Bank acceptance payable | 2,998 | 1,271 | ||||||
Accrued liabilities | 11,506 | 6,755 | ||||||
Total current liabilities | 74,080 | 48,601 | ||||||
Notes payable and long-term debt, less current portion | 33,997 | 19,057 | ||||||
Other long-term liabilities | – | 1,000 | ||||||
TOTAL LIABILITIES | 108,077 | 68,658 | ||||||
Stockholders' equity: | ||||||||
Preferred Stock; 5,000 shares authorized at $0.001 par value; no shares issued and outstanding at December 31, 2015 or 2014, respectively | – | – | ||||||
Common Stock; 45,000 shares authorized at $0.001 par value; 16,839 and 14,824 shares issued and outstanding at December 31, 2015 and 2014, respectively | 17 | 15 | ||||||
Additional paid-in capital | 233,336 | 192,112 | ||||||
Accumulated other comprehensive gain | 292 | 1,925 | ||||||
Accumulated deficit | (68,247 | ) | (79,040 | ) | ||||
TOTAL STOCKHOLDERS' EQUITY | 165,398 | 115,012 | ||||||
TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY | $ | 273,475 | $ | 183,670 |
The accompanying notes are an integral part of these consolidated financial statements.
F-3 |
Applied Optoelectronics, Inc. and Subsidiaries
CONSOLIDATED STATEMENTS OF OPERATIONS
(in thousands, except share and per share data)
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Revenue, net | $ | 189,903 | $ | 130,449 | $ | 78,424 | ||||||
Cost of goods sold | 129,450 | 86,203 | 55,396 | |||||||||
Gross profit | 60,453 | 44,246 | 23,028 | |||||||||
Operating expenses | ||||||||||||
Research and development | 20,852 | 15,970 | 8,512 | |||||||||
Sales and marketing | 6,381 | 6,043 | 4,191 | |||||||||
General and administrative | 19,771 | 17,095 | 10,632 | |||||||||
Total operating expenses | 47,004 | 39,108 | 23,335 | |||||||||
Income (loss) from operations | 13,449 | 5,138 | (307 | ) | ||||||||
Other income (expense) | ||||||||||||
Interest income | 328 | 369 | 104 | |||||||||
Interest expense | (1,018 | ) | (326 | ) | (1,125 | ) | ||||||
Other expense, net | (1,591 | ) | (699 | ) | (78 | ) | ||||||
Total other expense | (2,281 | ) | (656 | ) | (1,099 | ) | ||||||
Income (loss) before income taxes | 11,168 | 4,482 | (1,406 | ) | ||||||||
Income taxes | (375 | ) | (199 | ) | – | |||||||
Net income (loss) | $ | 10,793 | $ | 4,283 | $ | (1,406 | ) | |||||
Net income (loss) per share | ||||||||||||
Basic | $ | 0.69 | $ | 0.30 | $ | (0.14 | ) | |||||
Diluted | $ | 0.65 | $ | 0.28 | $ | (0.14 | ) | |||||
Weighted average shares used to compute net income (loss) per share: | ||||||||||||
Basic | 15,626,753 | 14,307,477 | 9,964,955 | |||||||||
Diluted | 16,532,850 | 15,186,961 | 9,964,955 |
The accompanying notes are an integral part of these consolidated financial statements.
F-4 |
Applied Optoelectronics, Inc. and Subsidiaries
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
(in thousands)
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Net income (loss) | $ | 10,793 | $ | 4,283 | $ | (1,406 | ) | |||||
(Loss) gain on foreign currency translation adjustment, net of tax | (1,633 | ) | (439 | ) | 348 | |||||||
Comprehensive income (loss) | $ | 9,160 | $ | 3,844 | $ | (1,058 | ) |
The accompanying notes are an integral part of these consolidated financial statements.
F-5 |
Applied Optoelectronics, Inc. and Subsidiaries
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
Years ended December 2013, 2014 and 2015
(in thousands)
Preferred Stock | Common Stock | |||||||||||||||||||||||||||||||
Number of shares | Amount | Number of shares | Amount | Additional paid-in capital | Accumulated other comprehensive gain | Accumulated deficit | Stockholders' equity | |||||||||||||||||||||||||
January 1, 2013 | 5,547 | $ | 105,367 | 266 | $ | 1,074 | $ | 4,468 | $ | 2,016 | $ | (81,917 | ) | $ | 31,008 | |||||||||||||||||
Public offering of common stock, net | – | – | 3,600 | 3 | 31,445 | – | – | 31,448 | ||||||||||||||||||||||||
Convert preferred stock common stock upon public offering | (5,601 | ) | (105,801 | ) | 8,739 | (1,211 | ) | 107,012 | – | – | – | |||||||||||||||||||||
Stock options exercised | – | – | 29 | 87 | 86 | – | – | 173 | ||||||||||||||||||||||||
Warrants exercised | 54 | 434 | 10 | 60 | – | – | – | 494 | ||||||||||||||||||||||||
Stock based compensation | – | – | – | – | 1,012 | – | – | 1,012 | ||||||||||||||||||||||||
Net loss | – | – | – | – | – | – | (1,406 | ) | (1,406 | ) | ||||||||||||||||||||||
Gain on foreign currency translation adjustment | – | – | – | – | – | 348 | – | 348 | ||||||||||||||||||||||||
December 31, 2013 | – | $ | – | 12,644 | $ | 13 | $ | 144,023 | $ | 2,364 | $ | (83,323 | ) | $ | 63,077 | |||||||||||||||||
Public offering of common stock, net | – | – | 2,025 | 2 | 45,679 | – | – | 45,681 | ||||||||||||||||||||||||
Issuance of shares under equity plans | – | – | 33 | – | – | – | – | – | ||||||||||||||||||||||||
Stock options exercised | – | – | 103 | – | 365 | – | – | 365 | ||||||||||||||||||||||||
Warrants exercised | – | – | 19 | – | – | – | – | – | ||||||||||||||||||||||||
Stock based compensation | – | – | – | – | 2,045 | – | – | 2,045 | ||||||||||||||||||||||||
Net income | – | – | – | – | – | – | 4,283 | 4,283 | ||||||||||||||||||||||||
Loss on foreign currency translation adjustment | – | – | – | – | – | (439 | ) | – | (439 | ) | ||||||||||||||||||||||
December 31, 2014 | – | $ | – | 14,824 | $ | 15 | $ | 192,112 | $ | 1,925 | $ | (79,040 | ) | $ | 115,012 | |||||||||||||||||
Public offering of common stock, net | – | – | 1,857 | 2 | 38,646 | – | – | 38,648 | ||||||||||||||||||||||||
Issuance of shares under equity plans | – | – | 77 | – | – | – | – | – | ||||||||||||||||||||||||
Stock options exercised | – | – | 81 | – | 452 | – | – | 452 | ||||||||||||||||||||||||
Stock based compensation | – | – | – | – | 2,120 | – | – | 2,120 | ||||||||||||||||||||||||
Net income | – | – | – | – | – | – | 10,793 | 10,793 | ||||||||||||||||||||||||
Loss on foreign currency translation adjustment | – | – | – | – | – | (1,633 | ) | – | (1,633 | ) | ||||||||||||||||||||||
Other | – | – | – | – | 6 | – | – | 6 | ||||||||||||||||||||||||
December 31, 2015 | – | $ | – | 16,839 | $ | 17 | $ | 233,336 | $ | 292 | $ | (68,247 | ) | $ | 165,398 |
The accompanying notes are an integral part of these consolidated financial statements.
F-6 |
Applied Optoelectronics, Inc. and Subsidiaries
CONSOLIDATED STATEMENTS OF CASH FLOWS
(in thousands)
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Operating activities: | ||||||||||||
Net income (loss) | $ | 10,793 | $ | 4,283 | $ | (1,406 | ) | |||||
Adjustments to reconcile net income (loss) to net cash provided by (used in) | ||||||||||||
operating activities: | ||||||||||||
Provision for obsolete inventory | 2,832 | 941 | 492 | |||||||||
Depreciation and amortization | 9,424 | 6,169 | 3,407 | |||||||||
Loss on disposal of assets | 78 | 12 | 1 | |||||||||
Share-based compensation and warrant expense | 2,120 | 2,061 | 1,069 | |||||||||
Unrealized foreign exchange loss | 2,462 | 1,288 | 362 | |||||||||
Changes in operating assets and liabilities: | ||||||||||||
Accounts receivable | (7,531 | ) | (9,703 | ) | (8,457 | ) | ||||||
Notes receivable | 977 | (977 | ) | 1,036 | ||||||||
Inventory | (37,502 | ) | (16,105 | ) | (7,520 | ) | ||||||
Other current assets | (2,624 | ) | (745 | ) | (4,622 | ) | ||||||
Accounts payable | (1,258 | ) | 18,947 | 8,079 | ||||||||
Accrued liabilities | 5,017 | 2,359 | 1,369 | |||||||||
Net cash provided by (used in) operating activities | (15,212 | ) | 8,530 | (6,190 | ) | |||||||
Investing activities: | ||||||||||||
Purchase of short-term investments | (175 | ) | (246 | ) | (7,970 | ) | ||||||
Purchase of property, plant and equipment | (57,080 | ) | (41,129 | ) | (9,600 | ) | ||||||
Proceeds from disposal of equipment | 351 | 47 | – | |||||||||
Deposits and deferred charges | (4,238 | ) | (720 | ) | (43 | ) | ||||||
Purchase of intangible assets | (478 | ) | (3,340 | ) | (123 | ) | ||||||
Net cash used in investing activities | (61,620 | ) | (45,388 | ) | (17,736 | ) | ||||||
Financing activities: | ||||||||||||
Proceeds from issuance of notes payable and long-term debt | 16,944 | 8,150 | 2,851 | |||||||||
Principal payments of long-term debt and notes payable | (2,413 | ) | (8,076 | ) | (285 | ) | ||||||
Proceeds from line of credit borrowings | 144,386 | 53,658 | 23,192 | |||||||||
Repayments of line of credit borrowings | (121,386 | ) | (50,733 | ) | (23,008 | ) | ||||||
Proceeds from bank acceptance payable | 8,257 | 5,925 | 6,778 | |||||||||
Repayments of bank acceptance payable | (6,361 | ) | (6,986 | ) | (6,026 | ) | ||||||
Repayments of note payable | (1,000 | ) | (1,000 | ) | – | |||||||
Decrease (increase) in restricted cash | (4,419 | ) | 266 | (249 | ) | |||||||
Exercise of stock options | 452 | 365 | 173 | |||||||||
Exercise of warrants | – | – | 494 | |||||||||
Proceeds from common stock offering, net | 38,648 | 45,681 | 31,448 | |||||||||
Other | 6 | – | – | |||||||||
Net cash provided by financing activities | 73,114 | 47,250 | 35,368 | |||||||||
Effect of exchange rate changes on cash | (383 | ) | (223 | ) | (159 | ) | ||||||
Net increase (decrease) in cash | (4,101 | ) | 10,169 | 11,283 | ||||||||
Cash and cash equivalents at beginning of year | 32,175 | 22,006 | 10,723 | |||||||||
Cash and cash equivalents at end of year | $ | 28,074 | $ | 32,175 | $ | 22,006 | ||||||
Supplemental disclosure of cash flow information: | ||||||||||||
Cash paid for: | ||||||||||||
Interest | $ | 1,070 | $ | 329 | $ | 1,133 | ||||||
Income taxes | 650 | 148 | 1 | |||||||||
Non-cash investing and financing activities: | ||||||||||||
Purchase of intangible assets with notes payable | – | 3,000 | – |
The accompanying notes are an integral part of these consolidated financial statements.
F-7 |
Applied Optoelectronics, Inc. and Subsidiaries
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
NOTE A—ORGANIZATION AND OPERATIONS
Applied Optoelectronics, Inc. (“AOI” or the “Company”) was incorporated in the State of Texas on February 28, 1997. In March 2013, the Company converted into a Delaware corporation. The Company is a leading, vertically integrated provider of fiber-optic networking products, primarily for three networking end-markets: internet data centers, cable television, and fiber-to-the-home. The Company designs and manufactures a range of optical communications products at varying levels of integration, from components, subassemblies and modules to complete turn-key equipment.
Prime World International Holdings, Ltd. (“Prime World”) is a wholly-owned subsidiary of the Company incorporated in the British Virgin Islands on January 13, 2006. Prime World is the parent company of Global Technology, Inc. (“Global”). Global was established in June 2002 in the People’s Republic of China (“PRC”) and was acquired by Prime World on March 30, 2006. The Company also operates a division, AOI—Taiwan, which is qualified to do business in Taiwan and primarily manufactures transceivers and performs research and development activities.
NOTE B—SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
1. | Basis of Presentation |
The consolidated financial statements include the accounts of the Company and all of its wholly-owned subsidiaries and are prepared in accordance with accounting principles generally accepted in the United States of America (GAAP). All intercompany balances and transactions have been eliminated in consolidation.
2. | Reclassifications |
Certain amounts in the prior year’s financial statements have been reclassified to conform to the current year presentation. This reclassification includes a $0.2 million reclass from accrued liabilities to accounts payable in 2014.
3. | Use of Estimates |
The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the amounts reported. Actual results could differ from those estimates in the consolidated financial statements and accompanying notes. Significant estimates and assumptions that impact these financial statements relate to, among other things, allowance for doubtful accounts, inventory reserve, share-based compensation expense, estimated useful lives of property and equipment, and taxes.
4. | Foreign Currency Translation |
The functional currency for our foreign operations is the local currency. The assets and liabilities of these operations are translated at the rate of exchange in effect on the balance sheet date and sales and expenses are translated at monthly average rates. The resulting gains or losses from translation are included in a separate component of other comprehensive income. Gains and losses resulting from re-measuring monetary asset and liability accounts that are denominated in a currency other than a subsidiary’s functional currency are included in net foreign exchange loss and are included in net income except for intercompany long-term investment nature. The translation gain or losses from long-term investment nature of intercompany balances are treated as translation adjustments and included in comprehensive income (loss).
5. | Fair Value |
The carrying value of cash, cash equivalents and short-term investments, accounts receivable, accounts payable, and note receivable approximate their historical fair values due to their short-term maturities. The carrying value of the debt approximates its fair value due to the short-term nature of the debt since it renews frequently at current interest rates. Management believes that the interest rates in effect at each year end represent the current market rates for similar borrowings.
The fair value measurement standard defines fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The standard characterizes inputs used in determining fair value according to a hierarchy that prioritized inputs based on the degree to which they are observable. The three levels of the fair value hierarchy are as follows:
Level 1—Inputs represent quoted prices in active markets for identical assets or liabilities.
Level 2—Inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly. These include quoted prices for similar assets or liabilities in active markets and quoted prices for identical or similar assets or liabilities in markets that are not active.
F-8 |
Level 3—Inputs that are not observable from objective sources, such as management’s internally developed assumptions used in pricing an asset or liability.
Assets and liabilities that are required to be fair valued on a recurring basis include money market funds, marketable securities, equity instruments and contingent consideration.
Money market funds are valued with Level 1 inputs, using quoted market prices, and are included in cash and cash equivalents on the Company’s consolidated balance sheets.
6. | Cash and Cash Equivalents |
The Company considers all highly liquid securities with an original maturity of ninety days or less from the date of purchase to be cash equivalents. Cash in foreign accounts was approximately $8.9 million and $4.6 million at December 31, 2015 and 2014, respectively.
The Company maintains cash and cash equivalents at U.S. financial institutions for which the combined account balances in individual institutions may exceed Federal Deposit Insurance Corporation (“FDIC”) insurance coverage and, as a result, there is a concentration of credit risk related to amounts on deposit in excess of FDIC insurance coverage. As of December 31, 2015, approximately $23.3 million of U.S. deposits were not covered by FDIC insurance. The Company has not experienced any losses and believes it is not exposed to any significant risk with such accounts.
7. | Restricted Cash/Compensating Balances |
The Company is required to maintain a compensation deposit equal to 30% of its bank acceptance notes to vendors with a China bank. The Company’s Taiwan subsidiary also uses time deposits for customs guarantees. As of December 31, 2015 and 2014, the amount of restricted cash was $4.7 million and $0.5 million, respectively.
8. | Short-Term Investments |
The Company invests its excess cash in bank certificates of deposit. As of December 31, 2015, the Company invested $7.9 million in certificates of deposit in RMB currencies with Taiwan banks. The maturity dates range from 6 months to 12 months.
The Company arranged a revolving line of credit agreement with the same Taiwan bank by pledging 100% of its certificates of deposit. As of December 31, 2015, the pledged certificate of deposit for such arrangement amount is $7.9 million.
9. | Accounts Receivable/Allowance for Doubtful Accounts |
The Company carries its accounts receivable at the net amount that it estimates to be collectible. An allowance for uncollectable accounts is maintained through a charge against operations. The allowance is determined by management review of outstanding amounts per customer, historical payments and the aging of accounts.
10. | Notes Receivable |
The Company carries its bank acceptance receivables at face value or discounted value if they are not interest bearing. The maturity date of the receivables are all within one year of the original issuance date and are carried at face value.
11. | Concentration of Credit Risk and Significant Customers |
Financial instruments which potentially subject the Company to concentrations of credit risk include cash, cash equivalents and accounts receivable. The Company places all cash and cash equivalents with high-credit quality financial institutions.
The Company performs ongoing credit valuations of its customers’ financial condition whenever deemed necessary and generally does not require deposits or collateral to support customer receivables. The historical amount of losses on uncollectible accounts has been within the Company’s estimates. The Company generates much of its revenue from a limited number of customers. In 2015, 2014 and 2013, its top five customers represented 81.8%, 72.0% and 59.1% of its revenue, respectively. In 2015, Amazon, Microsoft and Cisco represented 52.5%, 11.6% and 10.4% of its revenue, respectively. The five largest receivable balances for customers represented an aggregate of 80%, and 70% of total accounts receivable at December 31, 2015 and 2014, respectively. As of December 31, 2015, Amazon and Wesco represented 51.4% and 14.4% of total accounts receivable, respectively.
F-9 |
12. | Inventories |
Inventories are stated at the lower of cost (average-cost method) or market. Work in process and finished goods includes materials, labor and allocated overhead. The Company assesses the valuation of its inventory on a periodic basis and provides write-offs for the value of estimated excess and obsolete inventory based on estimates of future demand.
13. | Property, Plant and Equipment |
Property, plant and equipment are stated at cost, net of accumulated depreciation and amortization. The Company calculates depreciation using the straight-line method over the following estimated useful lives:
Useful lives | ||
Buildings | 20 - 40 years | |
Land improvements | 10 years | |
Machinery and equipment | 3 - 20 years | |
Furniture and fixtures | 1 - 8 years | |
Computer equipment and software | 3 - 7 years | |
Leasehold improvements | The shorter of the life of the applicable lease or the useful life of the improvement | |
Transportation equipment | 5 years |
Major improvements are capitalized and expenditures for maintenance and repairs are expensed as incurred. Construction in progress represents property, plant and equipment under construction or being installed. Costs include original cost, installation, construction and other direct costs which include interest on borrowings used to finance the asset. Construction in progress is transferred to the appropriate fixed asset account and depreciation commences when the asset has been substantially completed and placed in service.
Land use rights allow the Company rights for 50 years to certain land in Ningbo, China on which the Company built a facility that included office space, manufacturing operations and employee dormitories. The land use rights are recorded at cost and are amortized on the straight-line basis over the useful life of the related contract. The land use rights expire on October 7, 2054.
14. | Intangible Assets |
Intangible assets consist of intellectual property that is stated at cost less accumulated amortization. As of December 31, 2015, the Company had 178 total patents issued. The costs incurred to obtain such patents have been capitalized and are being amortized over an estimated life of 20 years. The Company periodically evaluates its intangible assets to determine whether events or changes in circumstances indicate that a patent or trademark may not be applicable to the Company’s current products or is no longer in use. If such a determination is made, the intangible asset is impaired and the remaining value of the patent or trademark will be expensed at that time.
15. | Impairment of Long-Lived Assets |
The Company accounts for impairment of long-lived assets in accordance with Accounting Standards Codification (“ASC”) 360, Property, Plant and Equipment, (“ASC 360”). Long-lived assets consist primarily of property, plant and equipment. In accordance with ASC 360, the Company periodically evaluates long-lived assets whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. When triggering event indicators are present, the Company obtains appraisals on an asset by asset basis, and will recognize an impairment loss when the sum of the appraised values is less than the carrying amounts of such assets. The appraised values, based on reasonable and supportable assumptions and projections, require subjective judgments. Depending on the assumptions and estimates used, the appraised values projected in the evaluation of long-lived assets can vary within a range of outcomes. The appraisals consider the likelihood of possible outcomes in determining the best estimate for the value of the assets.
F-10 |
The measurement for such an impairment loss is then based on the fair value of the asset as determined by the appraisals.
16. | Comprehensive Income (Loss) |
ASC 220, Comprehensive Income, (“ASC 220”) establishes rules for reporting and display of comprehensive income and its components. ASC 220 requires that unrealized gains and losses on the Company’s foreign currency translation adjustments be included in comprehensive income.
17. | Share-based Compensation |
The Company accounts for share-based compensation in accordance with the provisions of ASC 718, Compensation—Stock Compensation. Share-based compensation expense is recognized based on the estimated grant date fair value, net of an estimated forfeiture rate, in order to recognize compensation cost for those shares expected to vest. Compensation cost is recognized on a straight-line basis over the vesting period of the options.
18. | Revenue Recognition |
The Company derives revenue from the manufacture and sale of fiber optic networking products. Revenue recognition follows the criteria of ASC 605, Revenue Recognition. Specifically, the Company recognizes revenue when persuasive evidence exists of an arrangement with a customer, usually in the form of a customer purchase order; performance obligations have been satisfied; title and risk of loss have transferred to the customer; the price is fixed or determinable; and collectability is reasonably assured. The Company may offer units (samples) to current and potential customers at no charge for evaluation or qualification purposes.
19. | Product Warranty |
The Company generally offers a one-year limited warranty for its products but it can extend for longer periods of three to five years for certain products sold to certain customers. The Company estimates the costs that may be incurred under its basic limited warranty and records a liability for the amount of such costs at the time when product defective occurs. Factors that affect the Company’s warranty liability include the historical and anticipated rates of warranty claims and cost to repair. While we believe that our warranty accrual is adequate, our actual warranty costs may exceed the accrual, cost of sales will increase in the future. As of December 31, 2015 and 2014, the amount of accrued warranty was $412,000 and $247,000, respectively.
20. | Advertising Costs |
Advertising costs are charged to operations as incurred and amounted to approximately $104,000, $100,000 and $121,000 for the years ended December 31, 2015, 2014 and 2013, respectively.
21. | Research and Development |
Research and development costs are charged to operations as incurred. The Company receives reimbursement for certain development costs, which are capitalized when incurred, up to the reimbursable amount.
22. | Income Taxes |
The Company accounts for income taxes in accordance with the provisions of ASC 740, Income Taxes. The liability method is used to account for deferred income taxes. Under the liability method, deferred tax assets and liabilities are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. The ability to realize deferred tax assets is evaluated annually and a valuation allowance is provided if it is unlikely that the deferred tax assets will not give rise to future benefits in our tax returns.
The Company records uncertain tax positions in accordance with ASC 740 on the basis of a two-step process in which (1) it determines whether it is more likely than not that the tax positions will be sustained on the basis of the technical merits of the position and (2) for those tax positions that meet the more-likely-than-not recognition threshold, it recognizes the largest amount of tax benefit that is more than 50 percent likely to be realized upon ultimate settlement with the related tax authority.
The Company recognizes interest and penalties related to unrecognized tax benefits on the income tax expense line in the accompanying consolidated statement of operations. Accrued interest and penalties are included on the related tax liability line in the consolidated balance sheet.
F-11 |
23. | New Accounting Standards |
On February 25, 2016, the FASB released ASU 2016-02, Leases to complete its project to overhaul lease accounting. The ASU codifies ASC 842, Leases, which will replace the guidance in ASC 840. The new guidance will require lessees to recognize most leases on the balance sheet for capital and operating leases. The new guidance is effective for public business entities in fiscal years beginning after December 15, 2018. The Company is evaluating the impact of the accounting standard on its financial statements.
The FASB has issued Accounting Standards Update (ASU) No. 2016-01, Financial Instruments – Overall (Subtopic 825-10): Recognition and Measurement of Financial Assets and Financial Liabilities. The new guidance is intended to improve the recognition and measurement of financial instruments. The ASU affects public and private companies, not-for-profit organizations, and employee benefit plans that hold financial assets or owe financial liabilities. The new guidance is effective for public companies for fiscal years beginning after December 15, 2017, including interim periods within those fiscal years. For private companies, not-for-profit organizations, and employee benefit plans, the new guidance becomes effective for fiscal years beginning after December 15, 2018, and for interim periods within fiscal years beginning after December 15, 2019. The Company is evaluating the impact of the accounting standard on its financial statements.
The FASB issued ASU No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes during November 2015, which simplifies the presentation of deferred income taxes. This ASU provides presentation requirements to classify deferred tax assets and liabilities as noncurrent in a statement of financial position. The standard is effective for fiscal years beginning after December 15, 2016, including interim periods within that reporting period. Early adoption is permitted for any interim and annual financial statements that have not yet been issued. The ASU may be applied either prospectively to all deferred tax liabilities and assets or retrospectively to all periods presented. The Company early adopted this standard effective December 31, 2015 on a retrospective basis which resulted in a reclassification of our net current deferred tax asset to the net non-current deferred tax asset as of December 31, 2015. The adoption of this ASU had no impact on the balance sheet or income statement as the Company had a full valuation allowance.
The FASB has issued Accounting Standards Update (ASU) No. 2015-11, Inventory in July 2015 to require entity to measure inventory at the lower of cost or market. Market could be replacement cost, net realizable value, or net realizable value less an approximately normal profit margin. The Company adopted this ASU which had no material impact on the financial statements.
In April 2015, the FASB issued ASU No. 2015-03, Interest - Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt Issuance Costs, which requires the presentation of debt issuance costs related to a recognized debt liability as a direct deduction from the carrying amount of that debt liability. ASU 2015-03 does not address presentation or subsequent measurement of debt issuance costs related to line-of-credit arrangements. Given the absence of authoritative guidance within ASU 2015-03 for debt issuance costs related to line-of-credit arrangements, the SEC staff would not object to an entity deferring and presenting debt issuance costs as an asset and subsequently amortizing the deferred debt issuance costs ratably over the term of the line-of-credit arrangement, regardless of whether there are any outstanding borrowings on the line-of-credit arrangement. The Company is evaluating the impact of the accounting standard on its financial statements.
In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606). The amendments in ASU 2015-14 defer the effective date of ASU 2014-09 for all entities by one year. Public business entities should apply the guidance in ASU 2014-09 to annual reporting periods beginning after December 15, 2017, including interim reporting periods within that reporting period. Earlier application is permitted only as of annual reporting periods beginning after December 15, 2016, including interim reporting periods within that reporting period. The Company is evaluating the impact of the accounting standard on its financial statements.
24. | Reverse Stock Split |
In May 1, 2013, the Company’s board of directors approved, and holders of the requisite number of outstanding shares of our capital stock approved on May 21, 2013, an amendment to our certificate of incorporation to effect a reverse stock split with respect to our securities. Based on the prior board and stockholder approvals, on August 16, 2013 the Company’s board of directors determined that the ratio for the reverse stock split would be 30-to-one. The reverse stock split was effected on August 20, 2013, the date that the amendment to our certificate of incorporation was filed with the Delaware Secretary of State. The reverse stock split is reflected in the accompanying consolidated financial statements and related notes on a retroactive basis for all periods presented.
F-12 |
NOTE C—EARNINGS PER SHARE
Basic net loss per share has been computed using the weighted-average number of shares of common stock outstanding during the period. Diluted net loss per share has been computed using the weighted-average number of shares of common stock and dilutive potential common shares from options, restricted stock units and warrants outstanding during the period. In periods with net losses, normally dilutive shares become anti-dilutive. Therefore, basic and dilutive earnings per share are the same.
The following table presents the calculation of basic and diluted EPS:
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
(in thousands, except per share data) | ||||||||||||
Numerator: | ||||||||||||
Net income (loss) | $ | 10,793 | $ | 4,283 | $ | (1,406 | ) | |||||
Denominator: | ||||||||||||
Weighted average shares used to | ||||||||||||
compute net income (loss) per share | ||||||||||||
Basic | 15,627 | 14,307 | 9,965 | |||||||||
Effective of dilutive options, restricted stock units and warrants | 906 | 880 | – | |||||||||
Diluted | 16,533 | 15,187 | 9,965 | |||||||||
Net income (loss) per share | ||||||||||||
Basic | $ | 0.69 | $ | 0.30 | $ | (0.14 | ) | |||||
Diluted | $ | 0.65 | $ | 0.28 | $ | (0.14 | ) |
The following potentially dilutive securities were excluded from the computation of diluted net loss per share as their effect would have been antidilutive:
As of December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Employee stock options | – | – | 595 | |||||||||
Restricted stock units | – | – | 33 | |||||||||
Preferred stock warrants | – | – | 33 | |||||||||
– | – | 661 |
NOTE D—INVENTORIES
At December 31, 2015 and 2014, inventories consisted of the following:
2015 | 2014 | |||||||
(in thousands) | ||||||||
Raw materials | $ | 22,240 | $ | 16,243 | ||||
Work in process and sub-assemblies | 30,766 | 13,379 | ||||||
Finished goods | 13,232 | 4,158 | ||||||
$ | 66,238 | $ | 33,780 |
For the years ended December 31, 2015, 2014 and 2013, the lower of cost or market adjustment expensed for inventory was $2.8 million, $0.9 million and $0.5 million, respectively.
F-13 |
NOTE E—PROPERTY, PLANT AND EQUIPMENT
At December 31, 2014 and 2013, property, plant and equipment consisted of the following:
2015 | 2014 | |||||||
(in thousands) | ||||||||
Land improvements | $ | 863 | $ | 103 | ||||
Building and improvements | 27,255 | 16,196 | ||||||
Machinery and equipment | 88,882 | 61,529 | ||||||
Furniture and fixtures | 2,422 | 1,938 | ||||||
Computer equipment and software | 5,615 | 4,712 | ||||||
Transportation equipment | 294 | 270 | ||||||
125,331 | 84,748 | |||||||
Less accumulated depreciation and amortization | (37,970 | ) | (32,412 | ) | ||||
87,361 | 52,336 | |||||||
Construction in progress | 21,237 | 11,371 | ||||||
Land | 1,101 | 1,101 | ||||||
Property, plant and equipment, net | $ | 109,699 | $ | 64,808 |
For the years ended December 31, 2015, 2014 and 2013, depreciation expense of property, plant and equipment was $9.0 million $5.8 million and $3.3 million, respectively.
During the year ended December 31, 2015, there was $0.1 million of capitalized interest recorded in construction in progress.
NOTE F—INTANGIBLE ASSETS
At December 31, 2015 and 2014, intangible assets consisted of the following:
2015 | ||||||||||||
Gross Amount | Accumulated amortization | Intangible assets, net | ||||||||||
(in thousands) | ||||||||||||
Patents | $ | 5,446 | $ | (1,551 | ) | $ | 3,895 | |||||
Trademarks | 14 | (9 | ) | 5 | ||||||||
Total intangible assets | $ | 5,460 | $ | (1,560 | ) | $ | 3,900 |
2014 | ||||||||||||
Gross Amount | Accumulated amortization | Intangible assets, net | ||||||||||
(in thousands) | ||||||||||||
Patents | $ | 4,968 | $ | (1,141 | ) | $ | 3,827 | |||||
Trademarks | 14 | (8 | ) | 6 | ||||||||
Total intangible assets | $ | 4,982 | $ | (1,149 | ) | $ | 3,833 |
For the years ended December 31, 2015, 2014 and 2013, amortization expense for intangible assets, included in general and administrative expenses on the income statement, was $411,000 $356,000 and $68,000, respectively. The remaining weighted average amortization period for intangible assets is approximately 9.5 years.
In 2014, the Company acquired an intangible asset from an unrelated company in the form of a license to various patents related to transceiver product technology. The weighted-average amortization period for the license is 10 years.
At December 31, 2015, approximate amortization expense for intangible assets was as follows (in thousands):
2016 | $ | 424 | |||
2017 | 424 | ||||
2018 | 424 | ||||
2019 | 424 | ||||
2020 | 424 | ||||
thereafter | 1,780 | ||||
$ | 3,900 |
F-14 |
NOTE G—FAIR VALUE OF FINANCIAL INSTRUMENTS
The following table presents a summary of the Company’s financial instruments measured at fair value on a recurring basis as of December 31, 2015 (in thousands):
Quoted prices in active markets for identical assets (Level 1) | Significant other observable remaining inputs (Level 2) | Significant unobservable inputs (Level 3) | Total | |||||||||||||
Assets: | ||||||||||||||||
Cash and cash equivalents | $ | 28,074 | $ | – | $ | – | $ | 28,074 | ||||||||
Restricted cash | 4,719 | – | – | 4,719 | ||||||||||||
Short term investments | 7,886 | – | – | 7,886 | ||||||||||||
Total assets | $ | 40,679 | $ | – | $ | – | $ | 40,679 | ||||||||
Liabilities: | ||||||||||||||||
Bank acceptance payable | – | $ | 2,998 | – | $ | 2,998 | ||||||||||
Total liabilities | $ | – | $ | 2,998 | $ | – | $ | 2,998 |
The following table presents a summary of the Company’s financial instruments measured at fair value on a recurring basis as of December 31, 2014 (in thousands):
Quoted prices in active markets for identical assets (Level 1) | Significant other observable remaining inputs (Level 2) | Significant unobservable inputs (Level 3) | Total | |||||||||||||
Assets: | ||||||||||||||||
Cash and cash equivalents | $ | 32,175 | $ | – | $ | – | $ | 32,175 | ||||||||
Restricted cash | 509 | – | – | 509 | ||||||||||||
Short term investments | 8,189 | 980 | – | 9,169 | ||||||||||||
Total assets | $ | 40,873 | $ | 980 | $ | – | $ | 41,853 | ||||||||
Liabilities: | ||||||||||||||||
Bank acceptance payable | – | $ | 1,271 | – | $ | 1,271 | ||||||||||
Total liabilities | $ | – | $ | 1,271 | $ | – | $ | 1,271 |
F-15 |
NOTE H—NOTES PAYABLE AND LONG-TERM DEBT
Notes payable and long-term debt consisted of the following for the periods indicated (in thousands):
December 31, | ||||||||
2015 | 2014 | |||||||
Revolving line of credit with a U.S. bank up to $25,000 with interest at LIBOR plus 2.75% or 3%, maturing June 30, 2018 | $ | 23,000 | $ | 15,000 | ||||
Term loan with a U.S. bank with monthly payments of principal and interest at LIBOR plus 2.75%, maturing July 31, 2019 | 4,150 | 5,000 | ||||||
Term loan with a U.S. bank with monthly payments of principal and interest at LIBOR plus 2.75%, maturing June 30, 2020 | 2,000 | – | ||||||
Construction loan with a U.S. bank with monthly payments of principal and interest at LIBOR plus 2.75%, maturing January 26, 2022 | 8,588 | – | ||||||
Revolving line of credit with a Taiwan bank up to $3,000 with interest based on the bank's corporate interest rate index+ 1.5%, or 2.40% maturing on November 30, 2016 | 2,588 | – | ||||||
Revolving line of credit with a Taiwan bank up to $7,000 with interest at Taiwan deposit index plus 0.41% or LIBOR plus 1.7% maturing on February 6, 2016 | 4,475 | 3,605 | ||||||
Revolving line of credit with a Taiwan bank up to $4,000 with interest at Taiwan Time Deposit Interest Rate Index plus 1% or LIBOR plus 1% maturing on December 11, 2015 | 3,407 | 3,536 | ||||||
Revolving line of credit with the Taiwan branch of a China bank up to $10,000 with interest at LIBOR plus 1.5% or Taiwan Interbank Offered Rate plus 0.9% , maturing April 1, 2016 | 9,418 | – | ||||||
Note payable to a finance company due in monthly installments with 4.5% interest, maturing May 27, 2018 | 2,946 | 443 | ||||||
Note payable to a finance company due in monthly installments with 4.5% interest, maturing June 30, 2018 | 1,905 | – | ||||||
Revolving line of credit with a China bank up to $12,320 with interest of 3.15% for 3-month term which mature between January to March 2016 | 2,428 | 1,064 | ||||||
Total | 64,905 | 28,648 | ||||||
Less current portion | (30,908 | ) | (9,591 | ) | ||||
Non-current portion | $ | 33,997 | $ | 19,057 |
Bank Acceptance Notes Payable | ||||||||
Bank acceptance notes issued to vendors with a zero percent interest rate, a 30% guarantee deposit of $899, and maturity dates ranging from January 2016 to June 2016 | 2,998 | 1,271 |
The current portion of long-term debt is the amount payable within one year of the balance sheet date of December 31, 2015.
Maturities of notes payable and long-term debt are as follows for the future years ending December 31(in thousands):
2016 | $ | 30,908 | ||||
2017 | 3,950 | |||||
2018 | 20,877 | |||||
2019 | 1,598 | |||||
2020 thereafter | 7,572 | |||||
Total outstanding | $ | 64,905 |
On June 30, 2015, the Company entered into a credit agreement with East West Bank and Comerica Bank, a second lien deed of trust, multiple security agreements and promissory notes evidencing two credit facilities and a term loan. The credit agreement included a $25.0 million revolving line of credit which matures on June 30, 2018 and a $10 million term loan maturing on June 30, 2020. The interest rate on these loans is the LIBOR Borrowing Rate plus 2.75% or 3.0%. As of December 31, 2015 and 2014, $23.0 million and $15 million were outstanding under the revolving line of credit. As of December 31, 2015, $2 million was outstanding under the term loans.
The Company also has with East West Bank a term loan of $5 million with monthly payments of principal and interest that matures on July 31, 2019. As of December 31, 2015 and 2014, the outstanding balances were $4.2 million and $5 million respectively.
F-16 |
On January 26, 2015, the Company entered into a construction loan agreement with East West Bank for up to $22.0 million dollars to finance the construction of its campus expansion plan in Sugar Land, Texas. Upon signing the agreement, the Company deposited $11.0 million into a restricted bank account for owner’s contribution of construction costs. The loan will have a fifteen month draw down period with monthly interest payments commencing on February 26, 2015 and ending April 26, 2016. Thereafter, the entire outstanding principal balance shall be converted to a sixty-nine month term loan with principal and interest payments due monthly amortized over three hundred months. The first principal and interest payment is due on May 26, 2016 and will continue the same day of each month thereafter. The final principal and interest payment is due on January 26, 2022 and will include all unpaid principal and all accrued and unpaid interest. The Company may pay without penalty all or a portion of the amount owed earlier than due. Under the loan agreement, the loan bears interest, at an annual rate based on the one-month LIBOR Borrowing Rate plus 2.75%. As of December 31, 2015, there was $8.6 million outstanding under this loan agreement and there was zero balance in the restricted bank account.
The loan and security agreements with East West Bank and Comerica Bank require the Company to maintain certain financial covenants, including a minimum current ratio and minimum annual EBITDA. As of December 31, 2015, the Company was in compliance with all covenants contained in these agreements.
On January 6, 2015, the Company’s Taiwan branch entered into a credit facility with CTBC Bank Co. Ltd. in Taipei, Taiwan for 90.0 million New Taiwan dollars, or approximately $3.0 million, one year revolving credit facility. Its obligations under the credit facility are unsecured. Borrowings under the credit facility bear interest at a rate based on the Bank’s corporate interest rate index plus 1.5%, adjusted monthly. As of the execution of the credit facility the Bank’s corporate interest rate index is 0.91%. As of December 31, 2015, $2.6 million was outstanding under this credit facility.
On March 9, 2015, the Company’s Taiwan branch increased its $4.0 million credit facility with E. Sun Commercial Bank to $7.0 million. Its obligations under the credit facility are secured by our $4.0 million cash deposit in a one-year CD with such bank and mature on May 27, 2016. The $4.0 million revolving line of credit with CD security bears interest at a rate equal to Taiwan Deposit Index Rate plus 0.41% for New Taiwan dollar borrowings and a 0.1% service fee for U.S. dollar borrowings. The additional $3.0 million credit facility bears interest at a rate equal to LIBOR plus 1.7% divided by 0.946 and a 0.3% service fee for U.S. dollar borrowings. As of December 31, 2015 and 2014, $4.5 million and $3.6 million were outstanding under this credit facility.
On March 25, 2015, the Company’s Taiwan branch renewed its $4.0 million, one year revolving credit facility agreement, originally dated December 31, 2013, with Mega International Commercial Bank. Obligations under the credit facility are secured by a $4.0 million cash deposit in a CD with such bank. Borrowings under this credit facility bear interest at a rate not less than the LIBOR borrowing rate plus 1.0%, divided by 0.946 for U.S. and other currency borrowings, New Taiwan dollar borrowings bear interest at a rate equal to the Bank’s base lending rate plus 0.76%. The current effective interest rate is 1.77%. As of December 31, 2015 and 2014, $3.4 million and $3.5 million were outstanding under this credit facility.
On April 1, 2015, the Company’s Taiwan branch entered into a comprehensive credit line agreement with the Taipei branch of China Construction Bank, providing a revolving credit line of $10 million, maturing on April 1, 2016. Borrowings under the credit line agreement are secured by a standby letter of credit issued by the China branch of the bank under existing agreements between the bank and our China subsidiary. Borrowings under the credit line agreement reduce the amounts available under the existing credit line between the bank and the Company’s China subsidiary and cannot exceed 97% of the amount of the standby letter of credit issued by the China branch of the bank. Borrowings under the credit line agreement bear interest at a rate not less than LIBOR plus 1.5% for US dollar borrowings and at a rate of not less than Taiwan Interbank Offered Rate plus 0.9% for New Taiwan dollar borrowings. As of December 31, 2015, $9.4 million was outstanding under this credit facility.
On June 30, 2015, the Company’s Taiwan branch entered into a purchase and sale contract and a finance lease agreement together with the sale contract with Chailease Finance Co, Ltd. in connection with certain equipment, structured as a sale lease-back transaction. Pursuant to the sale contract, the Company sold certain equipment to Chailease and simultaneously leased the equipment back from Chailease pursuant to the finance lease agreement. The finance lease agreement has a three year term, with monthly lease payments, maturing on May 27 and June 30, 2018 respectively. The title to the equipment will be transferred to the Company upon the expiration of the finance lease agreement. As of December 31, 2015 and 2014, $4.8 million and $0.4 million were outstanding under this finance lease agreement.
As of December 31, 2015, the Company’s China subsidiary had credit facilities with China Construction Bank totaling $22.3 million, which can be drawn in U.S. currency, RMB currency, issuing bank acceptance notes to vendors with different interest rates or issuing standby letters of credit. As of December 31, 2015, the Company’s China subsidiary used $10 million of its credit facility and issued standby letters of credit as collateral for the Company’s Taiwan branch line of credit with China Construction Bank. As of December 31, 2015, the Company had a U.S. currency based loan of $2.4 million outstanding under various notes with three-month terms, maturing from January to March 2016 with effective interest rate of 3.15%. As of December 31, 2014, we had $1.1 million outstanding various notes with three-month terms.The outstanding balances of bank acceptance notes issued to vendors were $3.0 million and $1.3 million with zero interest rate as of December 31, 2015 and 2014 respectively.
As of December 31, 2015 and 2014, the Company had $37.7 million and $14.3 million of unused borrowing capacity, respectively.
As of December 31, 2015 and 2014, there was $12.6 million and $8.7 million of restricted cash, investments or security deposit associated mainly with the loan facilities, respectively.
F-17 |
NOTE I—ACCRUED LIABILITIES
Accrued liabilities consisted of the following as of December 31:
2015 | 2014 | |||||||
(in thousands) | ||||||||
Accrued payroll | $ | 6,757 | $ | 3,662 | ||||
Accrued Rent | 792 | – | ||||||
Accrued employee benefits | 1,379 | 808 | ||||||
Accrued state and local taxes | 372 | 330 | ||||||
Advance payments | 1,258 | 528 | ||||||
Accrued product warranty | 412 | 247 | ||||||
Accrued other | 536 | 1,180 | ||||||
$ | 11,506 | $ | 6,755 |
NOTE J—OTHER INCOME AND EXPENSE
Other income and expense consisted of the following as of December 31:
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Unrealized foreign exchange loss | (2,568 | ) | (1,299 | ) | (342 | ) | ||||||
Realized foreign exchange gain (loss) | 721 | 297 | (70 | ) | ||||||||
Government subsidy income | 217 | 271 | 322 | |||||||||
Other non-operating gain | 117 | 44 | 4 | |||||||||
Gain (loss) on disposal of assets | (78 | ) | (12 | ) | 8 | |||||||
$ | (1,591 | ) | $ | (699 | ) | $ | (78 | ) |
NOTE K—INCOME TAXES
The sources of our income (loss) from operations before income taxes were as follows:
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Domestic | $ | 14,062 | $ | 1,226 | $ | (684 | ) | |||||
Foreign | (2,894 | ) | 3,256 | (722 | ) | |||||||
Total income (loss) before income taxes | $ | 11,168 | $ | 4,482 | $ | (1,406 | ) |
The provision for income tax expense for the years ended December 31, is as follows:
2015 | 2014 | 2013 | ||||||||||
Current: | (in thousands) | |||||||||||
Federal | $ | 168 | $ | 193 | $ | – | ||||||
State | 207 | 6 | – | |||||||||
Foreign | – | – | – | |||||||||
Total | $ | 375 | $ | 199 | $ | – | ||||||
Deferred: | ||||||||||||
Federal | $ | – | $ | – | $ | – | ||||||
State | – | – | – | |||||||||
Foreign | – | – | – | |||||||||
Total | $ | – | $ | – | $ | – | ||||||
Income tax expense | $ | 375 | $ | 199 | $ | – |
F-18 |
Deferred income tax assets and liabilities result principally from net operating losses, different methods of recognizing depreciation, reserve for doubtful accounts, inventory reserves for obsolescence and accrued vacation, together with timing differences between book and tax reporting. At December 31, the net deferred tax assets and liabilities are comprised of the following approximate amounts:
2015 | 2014 | |||||||
(in thousands) | ||||||||
NOL carryforward | $ | 14,318 | $ | 12,266 | ||||
Inventory reserves | 1,616 | 676 | ||||||
AMT credit | 347 | 224 | ||||||
Unrealized gains and losses | 1,549 | 470 | ||||||
Stock compensation | 1,084 | 550 | ||||||
Fixed assets and intangibles | (4,432 | ) | (1,537 | ) | ||||
Other | 244 | 25 | ||||||
14,726 | 12,674 | |||||||
Less valuation allowance | (14,726 | ) | (12,674 | ) | ||||
Deferred tax assets, net | $ | – | $ | – |
The valuation allowance was established to reduce the deferred tax asset for the amount that will likely not be realized. This reduction is primarily necessary due to the uncertainty of the Company’s ability to utilize all of the net operating loss carry forwards. The valuation allowance increased by $2.1 million in 2015 and decreased by approximately $1.5 million in 2014. The increase in 2015 was primarily the result of current year changes in deferred income tax assets and liabilities, including increases in our net operating loss carryforwards. The decrease in 2014 was primarily the result of prior year changes in deferred income tax assets and liabilities.
Management assesses the available positive and negative evidence to estimate whether sufficient future taxable income will be generated to permit use of the existing deferred tax assets. In considering whether or not to continue to maintain the valuation allowance, we consider all available positive and negative evidence, including: historical profits and losses, forecasts of future profits or losses, and trends in the industries that we serve that may affect our ability to continue to generate profits. Objective evidence, such as historical losses, limits the ability to consider other subjective evidence, such as our projections for future growth.
On the basis of this evaluation, as of December 31, 2015, a valuation allowance of $14.7 million has been recorded to recognize only the portion of the deferred tax asset that is more likely than not to be realized. The amount of the deferred tax asset considered realizable, however, could be adjusted if estimates of future taxable income during the carryforward period are increased or if objective negative evidence is no longer present and additional weight is given to subjective evidence such as our projections for growth.
The Company has a U.S. net operating loss carry forward of approximately $50.3 million, which expires between 2022 and 2032. The Company also has U.S. research and development tax credits of $1.5 million which expire between 2024 and 2035. The Company has a net operating loss carryforward from its China operations of approximately $6.2 million, which expires between 2016 and 2020. The Company has a net operating loss carryforward from its Taiwan operations of approximately $2.6 million which expires between 2020 and 2025. Utilization of U.S. net operating losses and tax credit carry forwards are subject to an annual limitation due to the ownership change limitations set forth in Internal Revenue Code Section 382. During 2015, the Company updated its Section 382 analysis resulting in the recognition of additional utilizable net operating losses which had no impact on the Company’s balance sheet or income statement due to the Company having a full valuation allowance. Additional ownership changes could result in the expiration of the net operating loss and tax credit carryforward before utilization.
F-19 |
The U.S. NOL carryforwards and research and development tax credit carryforwards in the income tax returns filed included unrecognized tax benefits. The deferred tax assets recognized for those NOLs and tax credits are presented net of these unrecognized tax benefits.
The Company has approximately $0.9 million of windfall tax benefits from previous stock option exercises that have not been recognized as of December 31, 2015. This amount will not be recognized until the deduction would reduce our U.S. income taxes payable. At such time, the amount will be recorded as an increase in paid-in-capital. The Company uses ASC 740 ordering when determining when excess tax benefits have been realized.
A reconciliation of the U.S. federal income tax rate of 34% for the years ended December 31, to the Company’s effective income tax rate follows:
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Expected (benefit) taxes | $ | 3,797 | $ | 1,524 | $ | (467 | ) | |||||
Non-deductible expenses | 157 | 138 | 619 | |||||||||
Foreign differences | (1,267 | ) | 295 | – | ||||||||
Increase (decrease) in valuation allowance | 2,052 | (1,729 | ) | (7,533 | ) | |||||||
Section 382 limitation | (4,382 | ) | – | 7,423 | ||||||||
Other | 18 | (29 | ) | (42 | ) | |||||||
Tax expense | $ | 375 | $ | 199 | $ | – |
The Company’s wholly owned subsidiary, Prime World is a tax-exempt entity under the Income Tax Code of the British Virgin Islands.
The Company’s wholly owned subsidiary, Global Technology, Inc., has enjoyed preferential tax concessions in China as a national high-tech enterprise. In March 2007, China’s parliament enacted the PRC Enterprise Income Tax Law, or the EIT Law, under which, effective January 1, 2008, China adopted a uniform income tax rate of 25% for all enterprises including foreign invested enterprises. Global Technology, Inc. was recognized as a National high-tech enterprise in 2008 and was entitled to a 15% tax rate for a three year period from November 2008 to November 2014. Global Technology, Inc. renewed its National high-tech enterprise certificate and was therefore extended its three year tax preferential status from November 2014 to September 2017.
As of December 31, 2015, December 31, 2014 and December 31, 2013, the total amount of unrecognized tax benefit was $1.8 million, $1.6 million, and $2.2 million, respectively. The following is a tabular reconciliation of the total amounts of unrecognized tax benefits:
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Unrecognized tax benefits — January 1 | $ | 1,659 | $ | 2,200 | $ | – | ||||||
Gross increases — tax positions in prior period | 332 | 1,659 | 2,200 | |||||||||
Gross decreases — tax positions in prior period | (194 | ) | (2,200 | ) | – | |||||||
Unrecognized tax benefits — December 31 | $ | 1,797 | $ | 1,659 | $ | 2,200 |
As of December 31, 2015, we had $1.8 million of unrecognized tax benefits related to US tax benefits recognized for prior branch losses and research and development credits. As of December 31, 2014, we had $1.7 million of unrecognized tax benefits related to US tax benefits recognized for prior branch losses and research and development credits. As of December 31, 2013, we had $2.2 million of unrecognized tax benefits related to US tax benefits recognized for prior year branch losses. If recognized, there would be no impact our effective tax rate as a result of the full valuation allowance previously recognized. We believe that it is reasonably possible that $0.3 million of our remaining unrecognized tax positions may be recognized by the end of 2016.
F-20 |
The Company recognizes interest accrued related to unrecognized tax benefits and penalties as income tax expense. Related to the unrecognized tax benefits noted above, it has not accrued penalties or interest during 2015 as a result of net operating losses. During 2014, the Company also accrued no penalties or interest.
The Company is subject to taxation in the United States and various states and foreign jurisdictions. The Company’s open tax years subject to examination in the U.S. federal and state jurisdictions are 2012 through 2014. To the extent allowed by law, the taxing authorities may have the right to examine prior periods where net operating losses or tax credits were generated and carried forward, and make adjustments up to the amount of the net operating loss or tax credit carryforward. The Company is subject to examination for tax years 2008 forward for various foreign jurisdictions.
NOTE L—SHARE-BASED COMPENSATION
Equity Plans
The Company’s board of directors and stockholders approved the following equity plans:
· | the 1998 Share Incentive Plan |
· | the 2000 Share Incentive Plan |
· | the 2004 Share Incentive Plan |
· | the 2006 Share Incentive Plan |
· | the 2013 Equity Incentive Plan (“2013 Plan”) |
The Company issues stock options to employees, consultants and non-employee directors. Stock option awards generally vest over a four year period and have a maximum term of ten years. Stock options under these plans have been granted with an exercise price equal to the fair market value on the date of the grant. Nonqualified and Incentive Stock Options and restrictive stock units (“RSUs”) may be granted from these plans. Prior to the Company’s initial public offering, the fair market value of the Company’s stock had been historically determined by the board of directors and from time to time with the assistance of third party valuation specialists.
Stock Options
Options have been granted to the Company’s employees under the five incentive plans and generally become exercisable as to 25% of the shares on the first anniversary date following the date of grant and semi-annually thereafter. All options expire ten years after the date of grant.
The following is a summary of option activity:
Number of shares | Weighted Average Exercise Price | Weighted Average Share Price on Date of Exercise | Weighted Average Fair Value | Weighted Average Remaining Contractual Life | Aggregate Intrinsic Value | |||||||||||||||||
(in thousands, except price data) | ||||||||||||||||||||||
Outstanding, January 1, 2013 | 419 | $ | 5.94 | |||||||||||||||||||
Granted | 1,099 | 9.21 | ||||||||||||||||||||
Exercised | (29 | ) | 5.87 | $ | 178 | |||||||||||||||||
Forfeited | (16 | ) | 7.10 | |||||||||||||||||||
Expired | (5 | ) | 5.99 | |||||||||||||||||||
Outstanding, December 31, 2013 | 1,468 | 8.38 | 4.17 | 9,731 | ||||||||||||||||||
Granted | 108 | 13.84 | 7.24 | – | ||||||||||||||||||
Exercised | (104 | ) | 6.22 | 2.57 | 1,476 | |||||||||||||||||
Forfeited | (48 | ) | 8.23 | 5.43 | 628 | |||||||||||||||||
Expired | (1 | ) | 6.21 | 2.21 | 11 | |||||||||||||||||
Outstanding, December 31, 2014 | 1,423 | 8.96 | 4.48 | 3,486 | ||||||||||||||||||
Exercised | (81 | ) | 7.09 | $ | 16.53 | 2.62 | 762 | |||||||||||||||
Forfeited | (32 | ) | 8.96 | 4.43 | 212 | |||||||||||||||||
Outstanding, December 31, 2015 | 1,310 | $ | 9.07 | $ | 4.59 | 7.186 | $ | 10,598 | ||||||||||||||
Exercisable, December 31, 2015 | 766 | $ | 8.54 | $ | 4.12 | 6.880 | $ | 6,606 | ||||||||||||||
Vested and expected to vest | 1,274 | $ | 9.04 | $ | 4.57 | 7.172 | $ | 10,346 |
F-21 |
As of December 31, 2015, there was approximately $2.2 million of unrecognized stock option expense, net of estimated forfeitures, which is expected to be recognized over 1.65 years.
Restricted Stock Unit/Awards
The following is a summary of RSU/RSA activity:
Number of shares | Weighted Average Share Price on Date of Release | Weighted Average Fair Value | Aggregate Intrinsic Value | |||||||||||||
(in thousands, except price data) | ||||||||||||||||
Outstanding at January 1, 2013 | – | |||||||||||||||
Granted | 33 | $ | 10.00 | |||||||||||||
Released | – | |||||||||||||||
Cancelled/Forfeited | – | |||||||||||||||
Outstanding at December 31, 2013 | 33 | 10.00 | ||||||||||||||
Granted | 25 | 18.45 | ||||||||||||||
Released | (33 | ) | 10.57 | |||||||||||||
Cancelled/Forfeited | (4 | ) | 18.20 | |||||||||||||
Outstanding at December 31, 2014 | 21 | 18.22 | 238 | |||||||||||||
Granted | 156 | 11.06 | 1,722 | |||||||||||||
Released | (19 | ) | $ | 13.62 | 18.24 | 257 | ||||||||||
Cancelled/Forfeited | (6 | ) | 10.00 | 99 | ||||||||||||
Outstanding at December 31, 2015 | 152 | $ | 11.20 | $ | 2,611 | |||||||||||
Exercisable, December 31, 2015 | 10 | $ | 19.45 | $ | 170 | |||||||||||
Vested and expected to vest | 148 | $ | 11.22 | $ | 2,534 |
The aggregate intrinsic value of RSUs and RSAs outstanding at December 31, 2015 was $2.6 million. Unrecognized compensation expense related to these RSUs and RSAs at December 31, 2015 was $1.2 million. This expense is expected to be recognized over 2.94 years.
Share-Based Compensation
The Company recognizes compensation expense on a straight-line basis over the applicable vesting term of the award.
F-22 |
The Company estimated the fair value of employee stock options at the date of the grant using the Black-Scholes option-pricing model with the following assumptions:
2014 | 2013 | |||||||
Expected volatility | 52% | 52 to 70% | ||||||
Risk-free interest rate | 1.89% | 0.96% to 2.97% | ||||||
Expected term (years) | 6.25 | 6.25 | ||||||
Expected dividend yield | – | – | ||||||
Estimated forfeitures | 7.5% | 7.5% |
In 2015, the Company issued RSUs and RSAs as share-based compensation to employees and ceased issuing stock options. The Company estimates the fair value of RSU and RSA at the fair market value on the grant date and assumes an estimated forfeiture rate.
As there had been no market for the Company’s common stock prior to its initial public offering, the expected volatility for options granted to date was derived from an analysis of reported data for a peer group of companies that issued options with similar terms. The expected volatility has been determined using an average of the expected volatility reported by this peer group of companies. The Company uses a risk free interest rate based on the 10-year Treasury as reported during the period. The expected term of the options has been determined utilizing the simplified method which calculates a simple average based on vesting period and option life. The Company does not anticipate paying dividends in the near future. Estimated forfeitures are based on historical experience and future work force projections.
Employee share-based compensation expenses recognized for the years ended December 31, were as follows:
Share-Based compensation - by expense type
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Cost of goods sold | $ | 70 | $ | 88 | $ | 56 | ||||||
Research and development | 230 | 115 | 53 | |||||||||
Sales and marketing | 217 | 98 | 52 | |||||||||
General and administrative | 1,603 | 1,760 | 908 | |||||||||
Total share-based compensation expense | $ | 2,120 | $ | 2,061 | $ | 1,069 |
Share-Based compensation - by award type
2015 | 2014 | 2013 | ||||||||||
(in thousands) | ||||||||||||
Employee stock options | $ | 1,538 | $ | 1,660 | $ | 793 | ||||||
Restricted stock units | 582 | 385 | 220 | |||||||||
Warrants | – | 16 | 56 | |||||||||
Total share-based compensation expense | $ | 2,120 | $ | 2,061 | $ | 1,069 |
NOTE M—STOCKHOLDERS’ EQUITY
Common Stock
The Company’s Amended and Restated Certificate of Incorporation authorizes the issuance of up to 45,000,000 shares of common stock, all of which have been designated voting common stock.
F-23 |
Preferred Stock
The Company’s Amended and Restated Certificate of Incorporation authorizes the issuance of up to 5,000,000 shares of preferred stock.
Warrants
As of December 31, 2015 and 2014, the Company had no outstanding warrants to purchase common or preferred stock.
Public Offerings of Common Stock
On September 25, 2013, the Company’s registration statement on Form S-1 for its initial public offering was declared effective by the Securities and Exchange Commission. The offering commenced on September 26, and the Company sold 3.6 million shares of its common stock in its initial public offering at a price of $10.00 per share, providing proceeds of $31.5 million, net of expenses and underwriting discounts and commissions. The Company’s initial public offering closed on October 1, 2013.
On March 19, 2014, the Company sold 2.0 million shares of its common stock in a secondary offering at a price of $24.25 per share, providing proceeds of $45.7 million, net of expenses and underwriting discounts and commissions. The Company’s sale of 1.6 million shares in the secondary offering closed on March 25, 2014 and the Company’s sale of an additional 0.4 million shares as a result of the underwriters’ exercise of their option to purchase additional shares closed on March 28, 2014.
On June 3, 2015, the Company filed a Securities Registration Statement on Form S-3 (the “Form S-3”) with the Securities and Exchange Commission effective June 23, 2015, providing for the public offer and sale of certain securities of the Company from time to time, at its discretion, up to an aggregate amount of $140 million. In connection with the Company’s Form S-3, the Company entered into an Equity Distribution Agreement with Raymond James & Associates, Inc. (the “sales agent”) pursuant to which the Company may issue and sell shares of the Company’s stock having an aggregate offering price of up to $40 million (the “ATM Offering”) from time to time through the sales agent. On July 16, 2015, the Company commenced sales of common stock through the ATM Offering, and as of December 31, 2015, the Company has sold 1.9 million shares under the ATM Offering at a weighted average price of $21.54 per share, providing proceeds of $38.6 million, net of expenses and underwriting discounts and commissions.
Recovery of Stockholder Short Swing Profit
In November 2015, a member of the board of directors of the Company paid $5,510 to the Company, representing the disgorgement of short swing profits under Section 16(b) under the Exchange Act. The amount was recorded as additional paid-in capital.
NOTE N—SEGMENT AND GEOGRAPHIC INFORMATION
The Company operates in one reportable segment. The Company’s Chief Executive Officer, who is considered to be the chief operating decision maker, manages the Company’s operations as a whole and reviews financial information presented on a consolidated basis, accompanied by information about product revenue, for purposes of evaluating financial performance and allocating resources.
The following tables set forth the Company’s revenue and asset information by geographic region. Revenue is classified based on the location of product manufacturing plants. Long-lived assets in the tables below comprise only property, plant, equipment and intangible assets (in thousands):
For the year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Revenues: | (in thousands) | |||||||||||
United States | $ | 53,997 | $ | 30,723 | $ | 14,705 | ||||||
Taiwan | 115,265 | 77,680 | 31,863 | |||||||||
China | 20,641 | 22,046 | 31,856 | |||||||||
$ | 189,903 | $ | 130,449 | $ | 78,424 |
F-24 |
As of December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Long-lived assets: | (in thousands) | |||||||||||
United States | $ | 44,280 | $ | 15,875 | $ | 9,415 | ||||||
Taiwan | 45,420 | 35,688 | 7,192 | |||||||||
China | 24,753 | 18,008 | 16,337 | |||||||||
$ | 114,453 | $ | 69,571 | $ | 32,944 |
The Company serves three primary markets, the internet data center, CATV, and FTTH markets. Of the Company’s total revenues in 2015, the Company earned $123.2 million, or 64.9%, from the internet data center market, $53.7 million, or 28.3%, from the CATV market, $2.5 million, or 1.3%, from the FTTH market, and $10.5 million, or 5.5%, from other markets. Of the Company’s total revenues in 2014, the Company earned $64.4 million, or 49.4%, from the internet data center market, $47.4 million, or 36.3%, from the CATV market, $13.6 million, or 10.4% from the FTTH market, and $5.0 million, or 3.9% from other markets.
NOTE O—MAJOR CUSTOMERS
The Company currently derives its revenues from customers in the United States and throughout the rest of the world. Generally, the Company does not require deposits or other collateral to support customer receivables. The Company performs an initial and periodic credit evaluation of its customers and maintains an allowance for uncollectible accounts for potential uncollectible accounts. The historical amount of losses on uncollectible accounts has been within the Company’s estimates. The Company generates much of its revenue from a limited number of customers. In 2015, 2014 and 2013, its top five customers represented 81.8%, 72.0% and 59.1% of its revenue, respectively. In 2015, Amazon, Microsoft and Cisco represented 52.5%, 11.6% and 10.4% of its revenue, respectively. The five largest receivable balances for customers represented an aggregate of 80%, and 70% of total accounts receivable at December 31, 2015 and 2014, respectively. As of December 31, 2015, Amazon and Wesco represented 51.4% and 14.4% of total accounts receivable, respectively.
NOTE P—EMPLOYEE BENEFIT PLANS
On August 1, 2000, the Company established a 401(k) profit sharing plan covering employees meeting certain age and service requirements. The plan provides for discretionary Company contributions to be allocated based on the employee’s eligible contributions. The Company made contributions of $0.4 million and $0.2 million to the 401(k) plan for the years ended December 31, 2015 and 2014, respectively, and no contributions for the year ended December 31, 2013.
Employees of Global participate in a state-mandated social security program in China. Under this program, pension costs are recorded on the basis of required monthly contributions to employees’ individual accounts during their service periods. Under the regulations of the People’s Republic of China, Global is required to make fixed contributions to a fund, which is under the administration of the local labor departments.
Employees of AOI—Taiwan participates in a pension program under the Taiwan Labor Pension Act. Pension expense for Global was $0.3 million for the year ended December 31, 2015 and $0.4 million for each of the years ended December 31, 2014 and 2013, respectively. Pension expense for AOI—Taiwan was $0.4 million, $0.3 million and $0.2 million in the years ended December 31, 2015, 2014 and 2013, respectively.
NOTE Q—COMMITMENTS AND CONTINGENCIES
Commitments
The Company conducts part of its operations from leased facilities and also leases equipment. Rent expense was $1.1 million, $0.8 million and $0.6 million for the years ended December 31, 2015, 2014 and 2013, respectively.
At December 31, 2015, the approximate minimum rental commitments under noncancellable leases in excess of one year that expire at varying dates through 2029 were as follows:
Year ending December 31, | Amount | |||
(in thousands) | ||||
2016 | $ | 814 | ||
2017 | 788 | |||
2018 | 840 | |||
2019 | 935 | |||
thereafter | 9,576 | |||
$ | 12,953 |
F-25 |
Employment Agreements and Consultancy Agreements
The Company has entered into employment and indemnification agreements with three executive officers. These agreements provide that if their employment is terminated as a result of a change of control of the Company, or if their employment is terminated for certain other reasons set forth in the agreements, the Company will be required to pay a severance payment in an amount equal to their annual base salary, and other additional compensation due under the terms of the agreements.
The Company has also entered into employment and indemnification agreement with one other executive officer. These agreements provide that if their employment is terminated as a result of a change of control of the Company, the Company will be required to pay a severance payment in an amount equal to their six months of their annual base salary, and other additional compensation due under the terms of the agreements.
Contingencies
The Company may be party to litigation, claims or assessments in the ordinary course of business. Management is not aware of any of these matters that would have a material effect on the financial condition, results of operations or cash flows of the Company.
NOTE R—SUBSEQUENT EVENTS
We have evaluated subsequent events through the date the financial statements were issued.
On February 19, 2016, Applied Optoelectronics, Inc. (the “Company”) entered into two, one year revolving credit facilities totaling NT$320 million, or $9.8 million (the “Credit Facilities”) with China Trust Commercial Bank Co., Ltd. in Taiwan (the “Bank”). The first credit facility is in the amount of NT$200 million or $6.1 million (the “First Credit Facility”). The second credit facility is in the amount of NT$120 million or $3.7 million (the “Second Credit Facility”). Borrowing under the Credit Facilities will be used for general corporate purposes. The Company may draw upon the Credit Facilities from February 19, 2016 until February 18, 2017. The term of each draw shall be between 120 and 180 days. At the end of the draw term the Company will make payment for all principal and accrued interest. The Company’s obligations under the First Credit Facility will be secured by the Company’s deposit accounts with the Bank. Borrowings under the First Credit Facility for New Taiwan Dollars will bear interest at a rate equal to the Bank’s monthly Corporate Interest Index Rate plus 1.5%; for all foreign currency borrowing interest will bear at a rate equal to the Bank’s Cost of Fund lending rate plus 1.8%. The Company’s obligations under the Second Credit Facility will be secured by the Company’s certificate of deposit with the Bank. All borrowings under the Second Credit Facility will be based on the Bank’s monthly Corporate Interest Index Rate plus 0.93% annually. The Bank's current monthly Corporate Interest Index Rate is 0.71% annually. The Bank's current Cost of Fund lending rate is 0.50% annually. The Corporate Interest Index Rate and Cost of Fund lending rates are subject to change from time to time. The agreements for the Credit Facilities contain representations and warranties, and events of default applicable to the Company that are customary for agreements of this type.
F-26 |
NOTE S—Selected Quarterly Financial Data (unaudited)
The following tables set forth a summary of the Company’s quarterly financial information for each of the four quarters for the years ended December 31, 2015 and 2014.
First | Second | Third | Fourth | |||||||||||||
Year ended December 31, 2015 | Quarter | Quarter | Quarter | Quarter | ||||||||||||
Revenue | $ | 30,234 | $ | 49,632 | $ | 57,085 | $ | 52,952 | ||||||||
Cost of goods sold | 20,183 | 32,901 | 39,032 | 37,334 | ||||||||||||
Gross profit | $ | 10,051 | $ | 16,731 | $ | 18,053 | $ | 15,618 | ||||||||
Gross margin | 33.2% | 33.7% | 31.6% | 29.5% | ||||||||||||
Operating expenses: | ||||||||||||||||
Research and development | $ | 4,805 | $ | 4,701 | $ | 5,386 | $ | 5,960 | ||||||||
Sales and marketing | 1,559 | 1,607 | 1,582 | 1,633 | ||||||||||||
General and administrative | 5,003 | 4,534 | 4,963 | 5,271 | ||||||||||||
Total operating expenses | $ | 11,367 | $ | 10,842 | $ | 11,931 | $ | 12,864 | ||||||||
Income from operations | $ | (1,316 | ) | $ | 5,889 | $ | 6,122 | $ | 2,754 | |||||||
Interest and other income (expense), net | 641 | 335 | (3,016 | ) | (241 | ) | ||||||||||
Net income before taxes | $ | (675 | ) | $ | 6,224 | $ | 3,106 | $ | 2,513 | |||||||
Income taxes | – | (135 | ) | (406 | ) | 166 | ||||||||||
Net income | $ | (675 | ) | $ | 6,089 | $ | 2,700 | $ | 2,679 | |||||||
Net income per share—basic | (0.05 | ) | 0.41 | 0.17 | 0.16 | |||||||||||
Net income per share—diluted | (0.05 | ) | 0.38 | 0.16 | 0.15 |
First | Second | Third | Fourth | |||||||||||||
Year ended December 31, 2014 | Quarter | Quarter | Quarter | Quarter | ||||||||||||
Revenue | $ | 24,859 | $ | 32,650 | $ | 36,549 | $ | 36,391 | ||||||||
Cost of goods sold | 16,206 | 21,462 | 24,403 | 24,132 | ||||||||||||
Gross profit | $ | 8,653 | $ | 11,188 | $ | 12,146 | $ | 12,259 | ||||||||
Gross margin | 34.8% | 34.3% | 33.2% | 33.7% | ||||||||||||
Operating expenses: | ||||||||||||||||
Research and development | $ | 3,546 | $ | 4,009 | $ | 4,194 | $ | 4,221 | ||||||||
Sales and marketing | 1,333 | 1,497 | 1,622 | 1,591 | ||||||||||||
General and administrative | 3,554 | 3,952 | 4,458 | 5,131 | ||||||||||||
Total operating expenses | $ | 8,433 | $ | 9,458 | $ | 10,274 | $ | 10,943 | ||||||||
Income from operations | $ | 220 | $ | 1,730 | $ | 1,872 | $ | 1,316 | ||||||||
Interest and other income (expense), net | (110 | ) | 274 | (218 | ) | (602 | ) | |||||||||
Net income before taxes | $ | 110 | $ | 2,004 | $ | 1,654 | $ | 714 | ||||||||
Income taxes | (25 | ) | (85 | ) | (77 | ) | (12 | ) | ||||||||
Net income | $ | 85 | $ | 1,919 | $ | 1,577 | $ | 702 | ||||||||
Net income per share—basic | $ | 0.01 | $ | 0.13 | $ | 0.11 | $ | 0.05 | ||||||||
Net income per share—diluted | $ | 0.01 | $ | 0.12 | $ | 0.10 | $ | 0.05 | ||||||||
F-27 |
Exhibit 23.1
CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
We have issued our report dated March 14, 2016, with respect to the consolidated financial statements included in the Annual Report of Applied Optoelectronics, Inc. on Form 10-K for the year ended December 31, 2015. We consent to the incorporation by reference of said report in the Registration Statement of Applied Optoelectronics, Inc. on Form S-8 (File No. 333-192407), and on Form S-3 (File No. 333-204703).
/s/ GRANT THORNTON LLP
Houston, TX
March 14, 2016
Exhibit 31.1
CERTIFICATION
I, Chih-Hsiang (Thompson) Lin, certify that:
1. I have reviewed this Annual Report on Form 10-K of Applied Optoelectronics, Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
Date: March 14, 2016
/s/ Chih-Hsiang (Thompson) Lin | |
Chih-Hsiang (Thompson) Lin | |
President, Chief Executive Officer |
Exhibit 31.2
CERTIFICATION
I, Stefan J. Murry, certify that:
1. I have reviewed this Annual Report on Form 10-K of Applied Optoelectronics, Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
Date: March 14, 2016
/s/ Stefan J. Murry | |
Stefan J. Murry | |
Chief Financial Officer |
Exhibit 32.1
CERTIFICATION
Pursuant to the requirement set forth in Rule 13a-14(b) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and Section 1350 of Chapter 63 of Title 18 of the U.S. Code (18 U.S.C. § 1350), Chih-Hsiang (Thompson) Lin, President and Chief Executive Officer of Applied Optoelectronics, Inc. (the “Company”), and Stefan J. Murry, Chief Financial Officer of the Company, each hereby certifies that, to the best of his knowledge:
1. The Company’s Annual Report on Form 10-K for the period ended December 31, 2015, to which this Certification is attached as Exhibit 32.1 (the “Annual Report”) fully complies with the requirements of Section 13(a) or Section 15(d) of the Exchange Act; and
2. The information contained in the Annual Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
In Witness Whereof, the undersigned have set their hands hereto as of the 14th day of March, 2016.
/s/ Chih-Hsiang (Thompson) Lin | /s/ Stefan J. Murry | ||
Chih-Hsiang (Thompson) Lin | Stefan J. Murry | ||
President and Chief Executive Officer | Chief Financial Officer |
This certification accompanies the Annual Report to which it relates, is not deemed filed with the Securities and Exchange Commission and is not to be incorporated by reference into any filing of Applied Optoelectronics, Inc. under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of the Annual Report), irrespective of any general incorporation language contained in such filing.
/'D."'"FR),F3)E.B7*FR) H4.UB7%/_^
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M9W$8UGQI5G,?)G(Q97*+%2ZDAW_*5W9X!N)5N;YH!5IT^^YW4@]VF21RU)
M55H#2&A,1V[\YV]*%H/*1H)TX5!8=X BN%H"!SGFQH#?5UGKIV?W-X([^':5
M%%-!*"Z%9ECC%WW65RT%AW\O*&7B!X5:]FAR1FN8UH 09V<>2(.SHW=BJ#JI
MEFX:]W?8%$GW%&6-A&W*U6@'@VFB%TGS)VGÐGN(&;12X96"X4F#13R%AY
MA$?_9H51B&(GJ%^>MH)N__5W2U*(2;)^&EB&ES-\EA@Z8M=I0N9?N71+.N6&
M.AB&VO9/!U-SNW2#5SB*/$5^V$ YG,D0>L:U@P74/4&WI.P/&"].1S:#%PK
MW*+5NN5*X;=4M%
MRXI8S#HV29#E++4LNUK3ABN2*'7M8+E7T]G_&@^OH.VK5:\%RO)8*5N]A2RT
M2EE(WA()F-P9Z6I[:Q6IJA8;IH0<
?^]\S,H5XV(_/
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MYH_=Z$%:1*ITY/ =ONG,2RO=2.O-/0G_Y*:ID&P0 M\
M/R&4PP/Z'Z/HIOW#"M%@0KZ"PKD:.>\K#'8J0.N#09+[/BF$07[9*_ (IBW<
MB'Q"%T"JP1NTP4I,OVG"@M%3A%7RK3GTQ .A/[ @(^80E1LR"+D9"&"2)&A[
MHETZN6 ;"*$ MG/:+%E$Q(V2D*Z(-K\SB4BIEP54/0<4J6$\PP
?".NQ%/\=YCM-Y?1=TGM^E4KKY$/RL
M@?\F;CP*<<3# HF[^)<[^:=_N:O$^SI\R?0H$*'$@TJ:.'.HDI[MA+$@L65I$Q9!& AU6'?[YTB%!O-
M73VDCY;A0=^U]=6SG0Q'HH3'RPS]K4R[,&+?]1^55$E7M.'?3%U=JN;/OZ_0LXL.#!A L;/HPXL6+ &%4ZAMI4IDZD.(7NK#ST,MBG
M+1USM;@XM.C1I 4+$G0%M2"^I5N[?BVXE6K8@&FYFEJ#:HWU&TNR"UU2$B\EK7/K2.YU%DA%R#5D<@A6]37(Y_S(B1Y^Z
M1O@DVZQ1QT_7;,2-?ESKAY&E$9NX3BQD$>Y97KH660\QV&NR5;'9B^S 7*1O
M%\603+/U$I?*1%IC''!_1RI2EHJ;I"1EW.<>[!1"4=B],S;EFZXNO_PK9-L"+H)5;HW720ER8L+9J.
MJ7K.+%(-W]C+@DX+EC)LR/(*M8K$&AV3BZV1I*L;I>-EX7MM8-
MMF@7XG$#=%9_A?NDRS)/[U8/3]Z0"PTC\.P^=[QT=WM_-M,E- A;,<.L,---
M]7U/B7[7]\V-<'6L44:T=A"KMQH=<1+SJP*O]@>[&0[OMSHSYP%GN'2S$6+'
MV&)+%8VI!=((J)9*7^#(,_S;,_?\NQQ))LRK/7SC-_F,CW>ND99Z0N!N,_
M%337VA,/[\LLX&,KB^U%7"1HF HRW\\JI2Y@S5'$I#]&=2_D3]
MXNX3G2W8+,NU.G0LI:9=5/]R0]U3$Q=&\F3T!#