XML 39 R23.htm IDEA: XBRL DOCUMENT v3.7.0.1
Summary of Significant Accounting Policies (Policies)
3 Months Ended 12 Months Ended
Mar. 31, 2017
Dec. 31, 2016
Summary of Significant Accounting Policies [Abstract]    
Interim financial information

Interim financial information – The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States (“GAAP”) for interim financial information and with the instructions to Form 10-Q and Article 8 of Regulation S-X. Accordingly, they do not include all of the information and notes required by GAAP for annual financial statements. In the opinion of management, all adjustments, consisting of normal accruals, considered necessary for a fair presentation of the interim financial statements have been included. Results for the three months ended March 31, 2017 are not necessarily indicative of the results that may be expected for the year ending December 31, 2017.

 

The condensed consolidated financial statements and notes should be read in conjunction with the financial statements and notes for the year ended December 31, 2016 included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2016, as filed with the Securities and Exchange Commission on February 21, 2017 (the “2016 Form 10-K”).

 
Basis of consolidation
Basis of consolidation – The condensed consolidated financial statements include the accounts of the Company and its wholly owned subsidiary, SG Building. All intercompany balances and transactions have been eliminated.

Basis of consolidation – The consolidated financial statements include the accounts of the Company and its wholly owned subsidiaries, SG Building, SG Brazil and Endaxi. All intercompany balances and transactions have been eliminated.

Accounting estimates
Accounting estimates – The preparation of condensed consolidated financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenues and expenses during the reporting period. Significant areas which require the Company to make estimates include revenue recognition, stock-based compensation, warrant liabilities and allowance for doubtful accounts. Actual results could differ from those estimates.
Accounting estimates – The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America (“GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenues and expenses during the reporting period. Significant areas which require the Company to make estimates include revenue recognition, stock-based compensation, warrant liabilities and allowance for doubtful accounts. Actual results could differ from those estimates.
Operating cycle

Operating cycle – The length of the Company’s contracts varies, but is typically between six to twelve months. Assets and liabilities relating to long-term contracts are included in current assets and current liabilities in the accompanying balance sheets as they will be liquidated in the normal course of contract completion, which at times could exceed one year.

Operating cycle – The length of the Company’s contracts varies, but is typically between six to twelve months. Assets and liabilities relating to long-term contracts are included in current assets and current liabilities in the accompanying balance sheets as they will be liquidated in the normal course of contract completion, which at times could exceed one year.

Revenue recognition

Revenue recognition – The Company accounts for its long-term contracts associated with the design, engineering, manufacture and project management of building projects and related services, using the percentage-of-completion accounting method. Under this method, revenue is recognized based on the extent of progress towards completion of the long-term contract. The Company uses the cost to cost basis because management considers it to be the best available measure of progress on these contracts.

 

Contract costs include all direct material and labor costs and those indirect costs related to contract performance. General and administrative costs, marketing and business development expenses and pre-project expenses are charged to expense as incurred. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions and estimated profitability, including those arising from contract penalty provisions, and final contract settlements may result in revisions to costs and income and are recognized in the period in which the revisions are determined. An amount equal to contract costs attributable to claims is included in revenue when realization is probable and the amount can be reliably estimated.

 

The asset, “Costs and estimated earnings in excess of billing on uncompleted contracts,” represents revenue recognized in excess of amounts billed. The liability, “Billings in excess of costs and estimated earnings on uncompleted contracts,” represents billing in excess of revenue recognized.

 

The Company offers a one-year warranty on completed contracts. For the three months ended March 31, 2017 and 2016, the warranty claims were not material. The Company does not anticipate that any additional claims are likely to occur for warranties that are currently outstanding. Accordingly, no warranty reserve is considered necessary for any of the periods presented.

 

The Company also supplies repurposed containers to its customers. In these cases, the Company serves as a supplier to its customers for standard and made to order products that it sells at fixed prices. Revenue from these contracts is generally recognized when the products have been delivered to the customer, accepted by the customer and collection is reasonably assured. Revenue is recognized upon completion of the following: an order for product is received from a customer; written approval for the payment schedule is received from the customer and the corresponding required deposit or payments are received; a common carrier signs documentation accepting responsibility for the unit as agent for the customer; and the unit is delivered to the customer’s shipping point. The title and risk of loss passes to the customer at the customer’s receiving point.

 

Amounts billed to customers in a sales transaction for shipping and handling are classified as revenue. Products sold are generally paid for based on schedules provided for in each individual customer contract including upfront deposits and progress payments as products are being manufactured.

 

Funds received in advance of meeting the criteria for revenue recognition are deferred and are recorded as revenue when they are earned.

Revenue recognition – The Company accounts for its long-term contracts associated with the design, engineering, manufacture and project management of building projects and related services, using the percentage-of-completion accounting method. Under this method, revenue is recognized based on the extent of progress towards completion of the long-term contract. The Company uses the cost to cost basis because management considers it to be the best available measure of progress on these contracts.

 

Contract costs include all direct material and labor costs and those indirect costs related to contract performance. General and administrative costs, marketing and business development expenses and pre-project expenses are charged to expense as incurred. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions and estimated profitability, including those arising from contract penalty provisions, and final contract settlements may result in revisions to costs and income and are recognized in the period in which the revisions are determined. An amount equal to contract costs attributable to claims is included in revenue when realization is probable and the amount can be reliably estimated.

 

The asset, “Costs and estimated earnings in excess of billing on uncompleted contracts,” represents revenue recognized in excess of amounts billed. The liability, “Billings in excess of costs and estimated earnings on uncompleted contracts,” represents billing in excess of revenue recognized.

 

The Company offers a one-year warranty on completed contracts. For the years ended December 31, 2016 and 2015, the warranty claims were not material. The Company does not anticipate that any additional claims are likely to occur for warranties that are currently outstanding. Accordingly, no warranty reserve is considered necessary for any of the periods presented.

 

The Company also supplies repurposed containers to its customers. In these cases, the Company serves as a supplier to its customers for standard and made to order products that it sells at fixed prices. Revenue from these contracts is generally recognized when the products have been delivered to the customer, accepted by the customer and collection is reasonably assured. Revenue is recognized upon completion of the following: an order for product is received from a customer; written approval for the payment schedule is received from the customer and the corresponding required deposit or payments are received; a common carrier signs documentation accepting responsibility for the unit as agent for the customer; and the unit is delivered to the customer’s shipping point. The title and risk of loss passes to the customer at the customer’s receiving point.

 

Amounts billed to customers in a sales transaction for shipping and handling are classified as revenue. Products sold are generally paid for based on schedules provided for in each individual customer contract including upfront deposits and progress payments as products are being manufactured.

 

Funds received in advance of meeting the criteria for revenue recognition are deferred and are recorded as revenue when they are earned.

Cash and cash equivalents  

Cash and cash equivalents – The Company considers cash and cash equivalents to include all short-term, highly liquid investments that are readily convertible to known amounts of cash and have original maturities of three months or less upon acquisition.

Short-term investment  

Short-term investment – The Company classifies its investment consisting of a certificate of deposit with a maturity greater than three months but less than one year as short-term investment.

Accounts receivable  

Accounts receivable –  Accounts receivable are receivables generated from sales to customers and progress billings on performance type contracts. Amounts included in accounts receivable are deemed to be collectible within the Company’s operating cycle. Management provides an allowance for doubtful accounts based on the Company’s historical losses, specific customer circumstances, and general economic conditions. Periodically, management reviews accounts receivable and adjusts the allowance based on current circumstances and charges off uncollectible receivables when all attempts to collect have been exhausted and the prospects for recovery are remote.

 

The Company had a factoring agreement which provided for the Company to receive an advance of 75% of any accounts receivable that it factors. This agreement was terminated in January 2015.

Inventory

Inventory – Raw construction materials (primarily shipping containers) are valued at the lower of cost (first-in, first-out method) or net realizable value. Finished goods and work-in-process inventories are valued at the lower of costs or net realizable value, using the specific identification method. As of December 31, 2016, inventory consisted principally of work-in-process inventory, which amounted to $9,445. As of March 31, 2017, there was no inventory.

Inventory – Raw construction materials (primarily shipping containers) are valued at the lower of costs (first-in, first-out method) or market. Finished goods and work-in-process inventories are valued at the lower of costs or market, using the specific identification method. As of December 31, 2016 and 2015, work-in-process inventory amounted to $9,445 and $158,181, respectively.

Goodwill
Goodwill – Goodwill represents the excess of reorganization value over fair-value of identified net assets upon emergence from bankruptcy. In accordance with the accounting guidance on goodwill, the Company performs its impairment test of goodwill at the reporting unit level each fiscal year, or more frequently if events or circumstances change that would more likely than not reduce the fair value of its reporting units below their carrying values. The Company first assesses qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount, including goodwill. If management concludes that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, management conducts a two-step quantitative goodwill impairment test. The first step of the impairment test involves comparing the fair value of the applicable reporting unit with its carrying value. If the carrying amount of a reporting unit exceeds the reporting unit’s fair value, management performs the second step of the goodwill impairment test. The second step of the goodwill impairment test involves comparing the implied fair value of the affected reporting unit’s goodwill with the carrying value of that goodwill. The amount, by which the carrying value of the goodwill exceeds its implied fair value, if any, is recognized as an impairment loss. The Company’s evaluation of goodwill completed during the year ended December 31, 2016 resulted in no impairment losses

Goodwill – Goodwill represents the excess of reorganization value over fair-value of identified net assets upon emergence from bankruptcy. In accordance with the accounting guidance on goodwill, the Company performs its impairment test of goodwill at the reporting unit level each fiscal year, or more frequently if events or circumstances change that would more likely than not reduce the fair value of its reporting units below their carrying values. The Company first assesses qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount, including goodwill. If management concludes that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, management conducts a two-step quantitative goodwill impairment test. The first step of the impairment test involves comparing the fair value of the applicable reporting unit with its carrying value. If the carrying amount of a reporting unit exceeds the reporting unit’s fair value, management performs the second step of the goodwill impairment test. The second step of the goodwill impairment test involves comparing the implied fair value of the affected reporting unit’s goodwill with the carrying value of that goodwill. The amount, by which the carrying value of the goodwill exceeds its implied fair value, if any, is recognized as an impairment loss. The Company’s evaluation of goodwill completed during the year ended December 31, 2016 resulted in no impairment losses

Intangible assets

Intangible assets – Intangible assets represent the preliminary assets identified upon emergence from bankruptcy and consist of $2,766,000 of proprietary knowledge and technology which is being amortized over 20 years and $1,113,000 of customer contracts which is being amortized over 2.5 years. Intangible assets also include trademarks of $28,820 which is being amortized over 5 years. The Company evaluated intangible assets for impairment during the year ended December 31, 2016, and determined that there are no impairment losses. The accumulated amortization as of March 31, 2017 amounted to $437,625. The amortization expense for the three months ended March 31, 2017 was $145,875. The estimated amortization expense for the successive five years is as follows:

 

For the year ending December 31,:      
2018   $ 589,264  
2019     144,064  
2020     144,064  
2021     144,064  
2022     139,741  
Thereafter     1,867,050  
    $ 3,028,247  

Intangible assets – Intangible assets represent the preliminary assets identified upon emergence from bankruptcy and consist of $2,766,000 of proprietary knowledge and technology which is being amortized over 20 years and $1,113,000 of customer contracts which is being amortized over 2.5 years. The Company evaluated intangible assets for impairment during the year ended December 31, 2016, and determined that there are no impairment losses. The accumulated amortization and amortization expense as of and for the year ended was $291,750. The estimated amortization expense for the successive five years is as follows:

 

 For the year ending December 31,:   
 2017 $583,500 
 2018  583,500 
 2019  138,300 
 2020  138,300 
 2021  138,300 
Equipment  

Equipment – Equipment is stated at cost. Depreciation is computed using the straight-line method over the estimated lives of each asset. Estimated useful lives for significant classes of assets are as follows: computer and software 3 to 5 years and equipment 5 years. Repairs and maintenance are charged to expense when incurred.

Convertible instruments  

Convertible instruments – The Company bifurcates conversion options from their host instruments and accounts for them as free standing derivative financial instruments according to certain criteria. The criteria include circumstances in which (a) the economic characteristics and risks of the embedded derivative instrument are not clearly and closely related to the economic characteristics and risks of the host contract, (b) the hybrid instrument that embodies both the embedded derivative instrument and the host contract is not re-measured at fair value under otherwise applicable generally accepted accounting principles with changes in fair value reported in earnings as they occur and (c) a separate instrument with the same terms as the embedded derivative instrument would be considered a derivative instrument.

 

The Company has determined that the embedded conversion options in the convertible debentures should be bifurcated from their host instruments and a portion of the proceeds received upon the issuance of the hybrid contract have been allocated to the fair value of the derivative. The derivative is subsequently marked to market at each reporting date based on current fair value, with the changes in fair value reported in the consolidated statement of operations.

Common stock purchase warrants and other derivative financial instruments  

Common stock purchase warrants and other derivative financial instruments – The Company classifies as equity any contracts that (i) require physical settlement or net-share settlement or (ii) provides a choice of net-cash settlement or settlement in the Company’s own shares (physical settlement or net-share settlement) providing that such contracts are indexed to the Company’s own stock. The Company classifies as assets or liabilities any contracts that (i) require net-cash settlement (including a requirement to net cash settle the contract if any event occurs and if that event is outside the Company’s control) or (ii) gives the counterparty a choice of net-cash settlement of settlement shares (physical settlement or net-cash settlement). The Company assesses classification of common stock purchase warrants and other free standing derivatives at each reporting date to determine whether a change in classification between assets and liabilities or equity is required.


The Company’s free standing derivatives consist of warrants to purchase common stock that were issued to a placement agent involved with the private offering memorandum as well as issuances of convertible debentures as described in Note 8 and 14. The Company evaluated the common stock purchase warrants to assess their proper classification in the consolidated balance sheet and determined that the common stock purchase warrants feature a characteristic permitting cash settlement at the option of the holder. Accordingly, these instruments have been classified as warrant liabilities in the accompanying consolidated balance sheets as of December 31, 2015. As of December 31, 2015 the value of the warrant liabilities was de minimus. In connection with the Plan these warrants were cancelled.

Fair value measurements

Fair value measurements – Financial instruments, including cash and cash equivalents, accounts receivable, accounts payable and accrued liabilities are carried at cost, which the Company believes approximates fair value due to the short-term nature of these instruments.

 

The Company measures the fair value of financial assets and liabilities based on the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. The Company maximizes the use of observable inputs and minimizes the use of unobservable inputs when measuring fair value.

 

The Company uses three levels of inputs that may be used to measure fair value:

 

Level 1 Quoted prices in active markets for identical assets or liabilities.
Level 2 Quoted prices for similar assets and liabilities in active markets or inputs that are observable.
Level 3 Inputs that are unobservable (for example, cash flow modeling inputs based on assumptions).

  

Financial assets and liabilities measured at fair value on a recurring basis are summarized below:

 

   

March 31,

2017

   

Quoted

prices in

active market

for identical

assets

(Level l)

   

Significant

other

observable

inputs

(Level 2)

   

Significant

unobservable

inputs

(Level 3)

 
Short-term investment   $ 30,021     $      -     $ 30,021     $ -  
Conversion Option Liabilities   $ 288,134     $ -     $ -     $ 288,134  

 

    December 31, 2016     Quoted
prices in active market for identical
assets
(Level l)
    Significant other observable inputs 
(Level 2)
    Significant unobservable inputs 
(Level 3)
 
Short-term investment   $ 30,017     $   -     $ 30,017     $ -  
Conversion Option Liabilities   $ 384,461     $ -     $ -     $ 384,461  

 

Conversion option liabilities are measured at fair value using the Black-Scholes model and are classified within Level 3 of the valuation hierarchy. For fair value measurements categorized within Level 3 of the fair value hierarchy, the Company’s Chief Financial Officer, who reports to the Chief Executive Officer, determines its valuation policies and procedures. The development and determination of the unobservable inputs for Level 3 fair value measurements and fair value calculations are the responsibility of the Company’s Chief Financial Officer and are approved by the Chief Executive Officer.

 

The following table sets forth a summary of the changes in the fair value of the Company’s Level 3 financial liabilities that are measured at fair value on a recurring basis:

 

   

For the

Three Months

Ended
March 31,
2017

 
Beginning balance   $ 384,461  
Aggregate fair value of conversion option liabilities and warrants issued     -  
Change in fair value related to increase in warrants issued for anti-dilutive adjustment     -  
Change in fair value of conversion option liabilities and warrants     (96,327 )
Ending balance   $ 288,134  

 

The significant assumptions and valuation methods that the Company used to determine fair value and the change in fair value of the Company’s derivative financial instruments are discussed in Notes 6.

 

The Company presented conversion option liabilities at fair value on its condensed consolidated balance sheets, with the corresponding changes in fair value recorded in the Company’s condensed consolidated statements of operations for the applicable reporting periods. As disclosed in Note 6, the Company computed the fair value of the conversion option liability at the date of issuance and the reporting dates of March 31, 2017 and December 31, 2016 using a Black-Scholes model.

 

The calculation of the Black-Scholes model involves the use of the fair value of the Company’s common stock, estimated term, volatility, risk-free interest rates and dividend yield (if applicable). The Company developed the assumptions that were used as follows: The fair value of the Company’s common stock was obtained from the terms of the recapitalization of the Company including the Exit Facility, which occurred concurrent with the Company’s emergence from bankruptcy protection. The term represents the remaining contractual term of the derivative; the volatility rate was developed based on analysis of the Company’s historical stock price volatility and the historical volatility rates of several other similarly situated companies (using a number of observations that was at least equal to or exceeded the number of observations in the life of the derivative financial instrument at issue); the risk free interest rates were obtained from publicly available US Treasury yield curve rates; the dividend yield is zero because the Company has not paid dividends and does not expect to pay dividends in the foreseeable future.

Fair value measurements – Financial instruments, including cash and cash equivalents, accounts receivable, accounts payable and accrued liabilities are carried at cost, which the Company believes approximates fair value due to the short-term nature of these instruments.

 

The Company measures the fair value of financial assets and liabilities based on the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. The Company maximized the use of observable inputs and minimizes the use of unobservable inputs when measuring fair value.

 

 Level 1Quoted prices in active markets for identical assets or liabilities
 Level 2Quoted prices for similar assets and liabilities in active markets or inputs that are observable.
 Level 3Inputs that are unobservable (for example, cash flow modeling inputs based on assumptions).

 

Financial liabilities measured at fair value on a recurring basis are summarized below:

 

   

Successor

December 31,
2016

  Quoted prices in active market for identical assets
(Level l)
  Significant other
observable inputs
(Level 2)
  Significant
unobservable inputs
(Level 3)
 
 Short-term investment $30,017  $   -  $30,017  $- 
 Conversion Option Liabilities $384,461  $-  $-  $384,461 

 

   

Predecessor

December 31,
2015

  Quoted prices in active market for identical assets
(Level l)
  Significant other observable inputs
(Level 2)
  Significant unobservable inputs
(Level 3)
 
 Short-term investment $30,003  $    -  $30,003  $    - 
 Warrant Liabilities $-  $-  $-  $-(1)
 Conversion Option Liabilities $-  $-  $-  $-(1)

 

(1)De minimis value at December 31, 2015.

 

Warrant and conversion option liabilities are measured at fair value the lattice pricing model and are classified within Level 3 of the valuation hierarchy. For fair value measurements categorized within Level 3 of the fair value hierarchy, the Company’s Chief Financial Officer, who reports to the Chief Executive Officer, determines its valuation policies and procedures. The development and determination of the unobservable inputs for Level 3 fair value measurements and fair value calculations are the responsibility of the Company’s Chief Financial Officer and are approved by the Chief Executive Officer.

 

The following table sets forth a summary of the changes in the fair value of the Company’s Level 3 financial liabilities that are measured at fair value on a recurring basis:

 

   

Successor

For the year ended
December 31,
2016

  

Predecessor

For the year ended
December 31, 2015

 
 Beginning balance $-  $646,671 
 Aggregate fair value of conversion option liabilities issued  503,971   - 
 Change in fair value related to increase in warrants issued for anti-dilutive adjustment  -   - 
 Change in fair value of conversion option liabilities and warrants  (119,510)  (646,671)
 Ending balance $384,461  $- 

 

The significant assumptions and valuation methods that the Company used to determine fair value and the change in fair value of the Company’s derivative financial instruments are discussed in Note 8 and 14.

 

The Company presented warrant and conversion option liabilities at fair value on its consolidated balance sheets, with the corresponding changes in fair value recorded in the Company’s consolidated statements of operations for the applicable reporting periods. As disclosed in Note 8 and 13, the Company computed the fair value of the warrant and conversion option liabilities at the dates of issuance and the reporting dates of December 31, 2016 and 2015 using a Black-Scholes model.

 

The calculation of the Black-Scholes model involves the use of the fair value of the Company’s common stock, estimated term, volatility, risk-free interest rates and dividend yield (if applicable). The Company developed the assumptions that were used as follows: The fair value of the Company’s common stock was obtained from the terms of the recapitalization of the Company including the Exit Facility, which occurred concurrent with the Company’s emergence from bankruptcy protection. The term represents the remaining contractual term of the derivative; the volatility rate was developed based on analysis of the Company’s historical stock price volatility and the historical volatility rates of several other similarly situated companies (using a number of observations that was at least equal to or exceeded the number of observations in the life of the derivative financial instrument at issue); the risk free interest rates were obtained from publicly available US Treasury yield curve rates; the dividend yield is zero because the Company has not paid dividends and does not expect to pay dividends in the foreseeable future.

Share-based payments  

Share-based payments – The Company measures the cost of services received in exchange for an award of equity instruments based on the fair value of the award. For employees and directors the fair value of the award is measured on the grant date. The fair value amount is then recognized over the period services are required to be provided in exchange for the award, usually the vesting period. The Company recognizes stock-based compensation expense on a graded-vesting basis over the requisite service period for each separately vesting tranche of each award. Stock-based compensation expense is reported within operating expenses in the consolidated statements of operations.

Foreign currency translation  

Foreign currency translation – The Company’s international subsidiary consider their local currency to be their functional currency. Assets and liabilities of the Company’s subsidiary operating in a foreign country are translated into U.S. dollars using both the exchange rate in effect at the balance sheet date or historical date, as applicable. Results of operations are translated using the average exchange rates prevailing throughout the period. The effects of exchange rate fluctuations on translating foreign currency assets and liabilities into U.S. dollars are included in stockholders’ equity (deficit) as a component of accumulated other comprehensive loss, while gains and losses resulting from foreign currency translations are included in operations. As of December 31, 2016 and 2015, there is no activity in any foreign subsidiaries which would require any foreign currency translation.

Income taxes  

Income taxes –   The Company accounts for income taxes utilizing the asset and liability approach. Under this approach, deferred taxes represent the future tax consequences expected to occur when the reported amounts of assets and liabilities are recovered or paid. The provision for income taxes generally represents income taxes paid or payable for the current year plus the change in deferred taxes during the year. Deferred taxes result from the differences between the financial and tax bases of the Company’s assets and liabilities and are adjusted for changes in tax rates and tax laws when changes are enacted.

 

The calculation of tax liabilities involves dealing with uncertainties in the application of complex tax regulations. The Company recognizes liabilities for anticipated tax audit issues based on the Company’s estimate of whether, and the extent to which, additional taxes will be due. If payment of these amounts ultimately proves to be unnecessary, the reversal of the liabilities would result in tax benefits being recognized in the period when the liabilities are no longer determined to be necessary. If the estimate of tax liabilities proves to be less than the ultimate assessment, a further charge to expense would result.

 

The Company recognizes deferred tax liabilities and assets for the expected future tax consequences of events that have been included in the consolidated financial statements or tax returns. Deferred tax liabilities and assets are determined based on the difference between the financial statement basis and tax basis of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to reverse. The Company estimates the degree to which tax assets and credit carryforwards will result in a benefit based on expected profitability by tax jurisdiction. A valuation allowance for such tax assets and loss carryforwards is provided when it is determined to be more likely than not that the benefit of such deferred tax asset will not be realized in future periods. If it becomes more likely than not that a tax asset will be used, the related valuation allowance on such assets would be reduced.

Concentrations of credit risk

Concentrations of credit risk – Financial instruments that potentially subject the Company to concentration of credit risk, consist principally of cash and cash equivalents. The Company places its cash with high credit quality institutions. At times, such amounts may be in excess of the FDIC insurance limits. The Company has not experienced any losses in such account and believes that it is not exposed to any significant credit risk on the account.

 

With respect to receivables, concentrations of credit risk are limited to a few customers in the construction industry. The Company performs ongoing credit evaluations of its customers’ financial condition and, generally, requires no collateral from its customers other than normal lien rights. At March 31, 2017 and December 31, 2016, 57% and 63%, respectively, of the Company’s accounts receivable were due from four and three customers, respectively.

 

Revenue relating to two customers represented approximately 77% and 83% of the Company’s total revenue for the three months ended March 31, 2017 and 2016, respectively.

 

Costs of revenue relating to three vendors, represented approximately 83% and 97% of the Company’s total cost of revenue for the three months ended March 31, 2017 and 2016, respectively. The Company believes it has access to alternative suppliers, with limited disruption to the business, should circumstances change with its existing suppliers.

Concentrations of credit risk – Financial instruments, which potentially subject the Company to concentration of credit risk, consist principally of cash and cash equivalents. The Company places its cash with high credit quality institutions. At times, such amounts may be in excess of the FDIC insurance limits. The Company has not experienced any losses in such account and believes that it is not exposed to any significant credit risk on the account.

 

With respect to receivables, concentrations of credit risk are limited to a few customers in the construction industry. The Company performs ongoing credit evaluations of its customers’ financial condition and, generally, requires no collateral from its customers other than normal lien rights. At December 31, 2016 and 2015, 63% and 74%, respectively, of the Company’s accounts receivable were due from three and two customers, respectively.

 

Revenue relating to three and two customers represented approximately 69% and 70% of the Company’s total revenue for the years ended December 31, 2016 and 2015, respectively.

 

Cost of revenue relating to three and two vendors represented approximately 63% and 76% of the Company’s total cost of revenue for the years ended December 31, 2016 and 2015, respectively. The Company believes it has access to alternative suppliers, with limited disruption to the business, should circumstances change with its existing suppliers.

Recent accounting pronouncements

Recent accounting pronouncements – In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09 (“ASU 2014-09”), which creates Topic 606, Revenue from Contracts with Customers, and supersedes the revenue recognition requirements in Topic 605, Revenue Recognition, including most industry-specific revenue recognition guidance throughout the Industry Topics of the Codification. In addition, ASU 2014-09 supersedes the cost guidance in Subtopic 605-35, Revenue Recognition -Construction-Type and Production-Type Contracts, and creates new Subtopic 340-40, Other Assets and Deferred Costs - Contracts with Customers. In summary, the core principle of Topic 606 is that an entity recognizes revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. Additionally, ASU 2014-09 requires enhanced financial statement disclosures over revenue recognition as part of the new accounting guidance. The amendments in ASU 2014-09 are effective for annual reporting periods beginning after December 15, 2017, including interim periods within that reporting period, and early application is permitted commencing January 1, 2017. The Company is currently evaluating the provisions of ASU 2014-09 and assessing the impact, if any, it may have on its financial position and results of operations.

 

In July 2015, the FASB issued ASU No. 2015-11, Inventory: Simplifying the Measurement of Inventory. The update requires inventory not measured using either the last in, first out (LIFO) or the retail inventory method to be measured at the lower of cost and net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable cost of completion, disposal, and transportation. The update is effective for fiscal years beginning after December 15, 2016. Early adoption is permitted for financial statements that have not been previously issued. The Company has adopted ASU 2015-11 as of January 1, 2017. The provisions of ASU 2015-11 do not have a material impact on presentation and disclosures of the financial statements.

 

In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842). The update’s principle objective is to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet. ASU 2016-02 continues to retain a distinction between finance and operating leases but requires lessees to recognize a right-of-use asset representing its right to use the underlying asset for the lease term and a corresponding lease liability on the balance sheet for all leases with terms greater than twelve months. The update is effective for fiscal years beginning after December 15, 2018. Early adoption is permitted for financial statements that have not been previously issued. The Company is currently evaluating the effects of ASU 2016-02 on the financial statements. 

 

In March 2016, the FASB issued ASU No. 2016-09, Compensation – Stock Compensation (Topic 718.) The update makes several modifications to Topic 718 related to the accounting for forfeitures, employer tax withholding on share-based compensation, and the financial statement presentation of excess tax benefits or deficiencies. ASU 2016-09 also clarifies the statement of cash flows presentation for certain components of share-based awards. The update is effective for fiscal years beginning after December 15, 2016. Early adoption is permitted for financial statements that have not been previously issued. The Company is currently evaluating the effects of ASU 2016-09 on the financial statements.

Recent accounting pronouncements - In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09 (“ASU 2014-09”), which creates Topic 606, Revenue from Contracts with Customers, and supersedes the revenue recognition requirements in Topic 605, Revenue Recognition, including most industry-specific revenue recognition guidance throughout the Industry Topics of the Codification. In addition, ASU 2014-09 supersedes the cost guidance in Subtopic 605-35, Revenue Recognition -Construction-Type and Production-Type Contracts, and creates new Subtopic 340-40, Other Assets and Deferred Costs - Contracts with Customers. In summary, the core principle of Topic 606 is that an entity recognizes revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. Additionally, ASU 2014-09 requires enhanced financial statement disclosures over revenue recognition as part of the new accounting guidance. The amendments in ASU 2014-09 are effective for annual reporting periods beginning after December 15, 2017, including interim periods within that reporting period, and early application is permitted commencing January 1, 2017. The Company is currently evaluating the provisions of ASU 2014-09 and assessing the impact, if any, it may have on its financial position and results of operations.

 

In August 2014, the FASB issued ASU No. 2014-15, Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern, providing additional guidance surrounding the disclosure of going concern uncertainties in the financial statements and implementing requirements for management to perform interim and annual assessments of an entity’s ability to continue as a going concern within one year of the date the financial statements are issued. The update is effective on a prospective basis for fiscal years ending after December 15, 2016 and for interim periods thereafter. The Company adopted the ASU for the fiscal 2016 reporting period, which had no impact on its disclosures.

 

In April 2015, the FASB issued ASU No. 2015-03, Interest – Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt Issuance Costs (“ASU 2015-03”). The update requires debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of the related debt liability instead of being presented as an asset. Debt disclosures will include the face amount of the debt liability and the effective interest rate. The update requires retrospective application and represents a change in accounting principle. The update is effective for fiscal years beginning after December 15, 2015. As a result, capitalized debt issuance costs are now presented as a reduction in the carrying amount of convertible debentures. The change resulted in a reclassification of $5,204 of debt issuance costs in the accompanying consolidated balance sheet as of December 31, 2015. Consequently this reduced the total assets, total current liabilities and total liabilities as of December 31, 2015.

 

In July 2015, the FASB issued ASU No. 2015-11, Inventory: Simplifying the Measurement of Inventory. The update requires inventory not measured using either the last in, first out (LIFO) or the retail inventory method to be measured at the lower of cost and net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable cost of completion, disposal, and transportation. The update is effective for fiscal years beginning after December 15, 2016. Early adoption is permitted for financial statements that have not been previously issued. The Company does not believe the effects of ASU 2015-11 will have a material impact on future presentation and disclosures of the financial statements.

 

In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842). The updates principle objective is to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet. ASU 2016-02 continues to retain a distinction between finance and operating leases but requires lessees to recognize a right-of-use asset representing its right to use the underlying asset for the lease term and a corresponding lease liability on the balance sheet for all leases with terms greater than twelve months. The update is effective for fiscal years beginning after December 15, 2018. Early adoption is permitted for financial statements that have not been previously issued. The Company is currently evaluating the effects of ASU 2016-02 on the financial statements. 

 

In March 2016, the FASB issued ASU No. 2016-09, Compensation – Stock Compensation (Topic 718.) The update makes several modifications to Topic 718 related to the accounting for forfeitures, employer tax withholding on share-based compensation, and the financial statement presentation of excess tax benefits or deficiencies. ASU 2016-09 also clarifies the statement of cash flows presentation for certain components of share-based awards. The update is effective for fiscal years beginning after December 15, 2016. Early adoption is permitted for financial statements that have not been previously issued. The Company is currently evaluating the effects of ASU 2016-09 on the financial statements.