ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
(State or Other Jurisdiction of Incorporation or Organization) |
(I.R.S. Employer Identification No.) |
Title of each class |
Trading Symbol |
Name of each exchange on which registered | ||
Large Accelerated Filer | ☐ | ☒ | ||||
Non-Accelerated Filer |
☐ | Smaller Reporting Company | ||||
Emerging growth company |
MAGNACHIP SEMICONDUCTOR CORPORATION AND SUBSIDIARIES
FORM 10-K FOR THE YEAR ENDED DECEMBER 31, 2024
TABLE OF CONTENTS
Page | ||||||||
PART I | ||||||||
Item 1. | 2 | |||||||
Item 1A. | 19 | |||||||
Item 1B. | 38 | |||||||
Item 1C. | 38 | |||||||
Item 2. | 40 | |||||||
Item 3. | 40 | |||||||
Item 4. | 40 | |||||||
PART II |
||||||||
Item 5. | 41 | |||||||
Item 6. | 42 | |||||||
Item 7. | Management’s Discussion and Analysis of Financial Condition and Results of Operations |
42 | ||||||
Item 7A. | 62 | |||||||
Item 8. | 63 | |||||||
Item 9. | Changes in and Disagreements with Accountants on Accounting and Financial Disclosure |
104 | ||||||
Item 9A. | 104 | |||||||
Item 9B. | 105 | |||||||
Item 9C. | Disclosure Regarding Foreign Jurisdictions that Prevent Inspections |
105 | ||||||
PART III |
||||||||
Item 10. | 106 | |||||||
Item 11. | 106 | |||||||
Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters |
106 | ||||||
Item 13. | Certain Relationships and Related Transactions, and Director Independence |
106 | ||||||
Item 14. | 106 | |||||||
PART IV |
||||||||
Item 15. | 107 | |||||||
Item 16. | 112 | |||||||
113 |
Form 10-K
PART I
INDUSTRY AND MARKET DATA
We have made statements in this Annual Report on Form 10-K for the year ended December 31, 2024 (this “Report”) regarding our industry and our position in the industry based on our experience in the industry and our own views of market conditions, but we have not independently verified those statements. We do not have any obligation to announce or otherwise make publicly available updates or revisions to forecasts contained in these documents.
Statements made in this Report, unless the context otherwise requires, include the use of the terms “us,” “we,” “our,” the “Company” and “Magnachip” to refer to Magnachip Semiconductor Corporation and its consolidated subsidiaries. The term “Korea” refers to the Republic of Korea or South Korea. On September 1, 2020, we completed the sale of our Foundry Services Group business and our fabrication facility located in Cheongju, Korea to SK keyfoundry Inc. Unless otherwise noted herein, historical operational metrics presented herein do not include those of the Foundry Services Group.
SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS
We have made certain “forward-looking” statements in this Report within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), that involve risks and uncertainties. Forward-looking statements give our current expectations and projections relating to our financial condition, results of operations, plans, objectives, future performance and business. You can identify these statements by the fact that they do not relate strictly to historical or current facts. These statements may include words such as “anticipate,” “estimate,” “expect,” “project,” “intend,” “plan,” “believe” and other words and terms of similar meaning in connection with any discussion of the timing or nature of future operating or financial performance or other events. All statements other than statements of historical facts included in this Report that address activities, events or developments that we expect, believe or anticipate will or may occur in the future are forward-looking statements.
These forward-looking statements are largely based on our expectations and beliefs concerning future events, which reflect estimates and assumptions made by our management. These estimates and assumptions reflect our best judgment based on currently known market conditions and other factors relating to our operations and business environment, all of which are difficult to predict and many of which are beyond our control. Although we believe our estimates and assumptions to be reasonable, they are inherently uncertain and involve a number of risks and uncertainties that are beyond our control. In addition, management’s assumptions about future events may prove to be inaccurate. Management cautions all readers that the forward-looking statements contained in this Report are not guarantees of future performance, and we cannot assure any reader that those statements will be realized or the forward-looking events and circumstances will occur. Actual results may differ materially from those anticipated or implied in the forward-looking statements due to the factors listed in the “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business” sections and elsewhere in this Report.
All forward-looking statements speak only as of the date of this Report. We do not intend to publicly update or revise any forward-looking statements as a result of new information or future events or otherwise, except as required by law. These cautionary statements qualify all forward-looking statements attributable to us or persons acting on our behalf.
“Magnachip” is a registered trademark of us and our subsidiaries and “Magnachip Everywhere” is our registered trademark and service mark. All other product, service and company names mentioned in this Report are the service marks or trademarks of their respective owners.
1
Item 1. Business
General
We are a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communication, Internet of Things (“IoT”), consumer, computing, industrial and automotive applications. We have a proven record with approximately 45 years of operating history, a portfolio of approximately 1,000 registered patents and pending applications and extensive engineering and manufacturing process expertise. Our standard products business includes Display integrated circuit (“IC”) products, Power IC products, and Power discrete products. Our Display IC products provide panel display solutions to major suppliers of large and small rigid and flexible panel displays, and a wide range of applications including smartphones, TVs, automotive and IT applications such as monitors, notebook PCs, tablet PCs, as well as AR/VRs. Our Power IC products provide power management solutions to major television makers and large panel suppliers. Our Power discrete products provide power management solutions to communication, consumer, computing, servers, automotive, and industrial applications.
The wide variety of our analog and mixed-signal semiconductor products allows us to address multiple high-growth end markets and rapidly develop and introduce new products in response to market demands. Our design center and substantial manufacturing operations in Korea place us at the core of the global electronics device supply chain. We believe this enables us to quickly and efficiently respond to our customers’ needs, and allows us to better serve and capture additional demand from existing and new customers. Certain of our organic light emitting diodes (“OLEDs”) products are produced using external foundries. Through a strategic cooperation with external foundries, we strive to outsource wafers at competitive prices and produce quality products.
We have a long history of supplying and collaborating on product and technology development with leading innovators in the consumer electronics market. As a result, we have been able to strengthen our technology and develop products that are in high demand by our customers and end consumers. We sold approximately 370 distinct products in the year ended December 31, 2024 with a substantial portion of our revenues derived from a concentrated number of customers.
Our business is largely driven by innovation in the consumer electronics markets and the growing adoption by consumers of worldwide of electronic devices for use in their daily lives. The consumer electronics market is large and growing rapidly, largely due to consumers increasingly accessing a wide variety of rich media content, such as high definition audio and video, mobile devices, televisions and games on advanced consumer electronic devices. Electronics manufacturers are continuously implementing advanced technologies in new generations of electronic devices using analog and mixed-signal semiconductor components, such as display drivers that enable display of high resolution images, encoding and decoding devices that allow playback of high definition audio and video, and power semiconductors that increase power efficiency, thereby improving heat dissipation and extending battery life.
For the year ended December 31, 2024, we generated total revenues of $231.7 million, net loss of $54.4 million, operating loss of $53.0 million, Adjusted EBITDA of negative $23.6 million, Adjusted Operating Loss of $40.2 million and Adjusted Net Loss of $29.3 million. See “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” elsewhere in this Report for an explanation of our use of the Non-GAAP measures Adjusted EBITDA, Adjusted Operating Income (Loss) and Adjusted Net Income (Loss) and a reconciliation to net loss and operating loss prepared in accordance with United States Generally Accepted Accounting Principles (“U.S. GAAP”).
Recent Developments
On March 12, 2025, we announced that our Board of Directors and management team have made the decision to become a pure-play Power company to drive revenue growth, improve profitability, and maximize shareholder value. As a result, we are exploring all strategic options for its Display business (Display IC
2
products), which is to be classified as discontinued operations when our results of operations for the first fiscal quarter of 2025 are reported. Our strategic options include a sale, merger, joint venture, licensing, and wind-down. We currently intend to complete this strategic process and exit the Display business by the end of the second quarter of 2025.
Our History
Our business was named “MagnaChip Semiconductor” when it was acquired from SK hynix Inc., formerly known as Hynix Semiconductor, Inc. (“SK hynix”), in October 2004.
On March 10, 2011, we completed our initial public offering. In connection with our initial public offering, we converted from a Delaware limited liability company to a Delaware corporation.
On December 30, 2020, we changed our name from “MagnaChip Semiconductor Corporation” to “Magnachip Semiconductor Corporation.”
On May 30, 2023, we announced a plan to separate our standard products business, consisting of Display Solutions and Power Solutions business lines, into two different entities to better align our product strategies by enabling each entity to allocate its resources more effectively to the specific needs of its customers, as well as to enhance transparency, accountability and flexibility in business (the “Internal Separation”). To effectuate the Internal Separation, we reorganized our standard products business into two distinct businesses: (i) our Display IC and Power IC businesses, which are fabless businesses, were grouped together to form the Mixed-Signal Solutions (“MSS”) business, and (ii) our Power discrete business, which is an integrated device manufacturing (“IDM”) business, became the Power Analog Solutions (“PAS”) business.
On January 10, 2024, we completed the Internal Separation by forming a new Korean limited liability company named “Magnachip Mixed-Signal, Ltd.” (“MMS”) and transferring the MSS business into such subsidiary. Following the Internal Separation, our MSS business is primarily operated by Magnachip Mixed-Signal, Ltd., and our PAS business is primarily operated by Magnachip Semiconductor, Ltd. (“MSK”), our already-existing Korean operating company. Both companies are indirect wholly-owned subsidiaries of the Company.
On December 31, 2024, an intercompany business transfer agreement was executed between MMS and MSK. Considering the Company’s overall performance and strategic direction—as well as insights from benchmarking global competitors and feedback from our stockholders, both MSK and MMS agreed that consolidating the Power IC and Power discrete businesses under a single company would create a more effective framework for expanding and strengthening the Company’s business for Power products. Accordingly, the Company’s Power IC business was transferred from MMS to MSK, with the transfer being completed on January 1, 2025.
For the purpose of this Annual Report on Form 10-K for the year ended December 31, 2024, our historical results and descriptions of our business and operations reflect the Power IC business as part of the MSS business since it was part of that business group for all of the fiscal year 2024.
Legacy Foundry Services Group Business
On September 1, 2020, we completed the sale of our Foundry Services Group business and our fabrication facility located in Cheongju, Korea (known as “Fab 4”) to SK keyfoundry Inc. This sale was part of a strategic shift in our operational focus to our standard products business. The Foundry Services Group business provided specialty analog and mixed-signal foundry services mainly for fabless and Integrated Device Manufacturer semiconductor companies.
3
Our Products
Our Display IC products provide flat panel display solutions to major suppliers of large and small flat panel displays. These products include source and gate drivers and timing controllers that cover a wide range of flat panel displays used in mobile communications, automobiles, entertainment devices, notebook PCs, monitors and liquid crystal display (“LCD”), OLEDs and micro light emitting diode (“Micro LED”) televisions. Our Display IC products support the industry’s most advanced display technologies, such as OLEDs, and low temperature polysilicon thin film transistor (“LTPS TFT”), as well as high-volume display technologies such as amorphous silicon thin film transistors (a-Si TFTs). Since 2007, we have designed and manufactured OLED display driver IC products. Our current portfolio of OLED solutions address a wide range of resolutions ranging from HD (High Definition) to WQHD (Wide Quadruple High Definition) for wide range of applications including smartphones, TVs, automotive applications and IT applications such as monitors, notebook PCs, tablet PCs as well as AR/VRs. Our Power IC products provide power management solutions to major television suppliers and large panel display suppliers. These products include AC-DC/DC-DC converters, LED drivers, regulators, power management integrated circuits (“PMICs”) and level shifters for a range of devices, including televisions, wearable devices, notebooks, tablet PCs and other consumer electronics, as well as automotive applications. Our Display IC and Power IC business represented 23.4% and 19.3% of our total revenues for the fiscal years ended December 31, 2024 and 2023, respectively.
We expanded our business and market opportunity by establishing our Power discrete product line in late 2007. We have introduced a number of power management semiconductor products, including discrete and integrated circuit solutions for power management in high-volume consumer applications. Discrete products include metal oxide semiconductor field effect transistors (“MOSFETs”), and insulated-gate bipolar transistors (“IGBTs”) for a range of devices, including televisions, smartphones, mobile phones, wearable devices, desktop PCs, notebooks, tablet PCs, other consumer electronics, automotive, and industrial applications such as power suppliers, e-bikes, photovoltaic inverters, LED lighting and motor drives. Our Power discrete business represented 72.0% and 65.8% of our total revenues for the fiscal years ended December 31, 2024 and 2023, respectively.
Market Opportunity
The semiconductor market is large and is expanding its applications. Recently, industrial applications such as power suppliers, e-bikes, photovoltaic inverters, LED lighting, motor drives, and automotive applications such as on board chargers, electric motor drives, electric pumps, DC-DC converters and powertrain inverters in hybrid & battery electric vehicle (HEV & BEV) are further driving growth in the semiconductor market. Electronics device manufacturers recognize that the consumer entertainment experience plays a critical role in differentiating their products. To address and further stimulate consumer demand, electronics manufacturers have been driving rapid advances in the technology, functionality, form factor, cost, quality, reliability and power consumption of their products. Electronics manufacturers are continuously implementing advanced technologies in new generations of electronic devices using analog and mixed-signal semiconductor components, including power semiconductors that increase power efficiency, thereby improving heat dissipation and extending battery life. These advanced generations of consumer devices are growing faster than the overall electronics device market.
Requirements of Leading Electronic Devices Manufacturers
We believe our target customers view the following characteristics and capabilities as key differentiating factors among available analog and mixed-signal semiconductor suppliers:
• | Broad Offering of Differentiated Products with Advanced System-Level Features and Functions. Leading electronic devices manufacturers seek to differentiate their products by incorporating innovative semiconductor products that enable unique system-level functionality and enhance performance. These consumer electronics manufacturers seek to closely collaborate with semiconductor solutions providers that |
4
continuously develop new and advanced products, and technologies that enable state of the art features and functions, such as bright and thin displays, small form factor and energy efficiency. |
• | Fast Time-to-Market with New Products. As a result of rapid technological advancements and short product lifecycles, our target customers typically prefer suppliers who have a compelling pipeline of new products and capacity to leverage a substantial intellectual property and technology base to accelerate product design and manufacturing when needed. |
• | Ability to Deliver Cost Competitive Solutions. Electronics manufacturers are under constant pressure to deliver cost-competitive solutions. To accomplish this objective, they need strategic semiconductor suppliers that have the ability to provide system-level solutions, highly integrated products and a broad product offering at a range of price points and have the design and manufacturing infrastructure and logistical support to deliver cost competitive products. |
• | Focus on Delivering Highly Energy-Efficient Products. Consumers increasingly seek longer run-time, environmentally friendly and energy-efficient consumer electronic products. In addition, there is an increasing regulatory focus on reducing energy consumption of consumer electronic products. As a result of a global focus on more environmentally friendly products, our customers are seeking analog and mixed-signal semiconductor suppliers that have the technological expertise to deliver solutions that satisfy these ever increasing regulatory and consumer power efficiency demands. |
Our Competitive Strengths
Designing and manufacturing analog and mixed-signal semiconductors capable of meeting the evolving functionality requirements for electronics devices are challenging. In order to grow and succeed in the industry, we believe semiconductor suppliers must have a broad, advanced intellectual property portfolio, product design expertise, comprehensive product offerings and specialized manufacturing process technologies and capabilities. Our competitive strengths enable us to offer our customers solutions to solve their key challenges. We believe our strengths include:
• | Advanced Analog and Mixed-Signal Semiconductor Technology. Our long operating history, large patent portfolio, extensive engineering and manufacturing process expertise and analog and mixed-signal intellectual property allow us to leverage our technology and develop new products across multiple end markets. Our product development efforts are supported by a team of approximately 220 engineers as of the date of this Annual Report. Our platform allows us to develop and introduce new products quickly and integrate numerous functions into a single product. For example, we were one of the first companies to introduce a commercial OLED display driver for mobile phones. |
• | Established Relationships and Close Collaboration with Leading Global Electronics Companies. We have a long history of supplying and collaborating on product and technology development with leading innovators in the consumer electronics market. Our close customer relationships have been built based on many years of close collaborative product development, which provides us with deep system-level knowledge and key insights into our customers’ needs. As a result, we are able to continuously strengthen our technology in areas of strategic interest for our customers and focus on those products that our customers and end consumers demand the most. |
• | Longstanding Presence in Asia and Proximity to Global Electronics Devices Supply Chain. Our presence in Asia facilitates close contact with our customers and fast response to their needs, and enhances our visibility into new product opportunities, markets and technology trends. Our design center and substantial manufacturing operations in Korea place us close to many of our largest customers and to the core of the global electronics devices supply chain. We have active applications, engineering, product design and customer support resources, as well as senior management and marketing resources, in geographic locations close to our customers. This allows us to strengthen our relationship with customers through better service, faster turnaround time and improved product design collaboration. We believe this also helps our customers |
5
to deliver products faster than their competitors and to solve problems more efficiently than would be possible with other suppliers. |
• | Broad Portfolio of Product Offerings Targeting Large, High-Growth Markets. We continue to develop a wide variety of analog and mixed-signal semiconductor solutions for multiple high-growth electronics device end markets. We believe our expanding product offerings allow us to provide additional products to new and existing customers and to cross-sell our products to our established customers. For example, we have leveraged our technology expertise and customer relationships to develop and grow power management solutions to customers. Our power management solutions enable our customers to increase system stability and improve heat dissipation and energy use, resulting in improved system efficiency and system cost savings for our customers, as well as environmental benefits. We have been able to sell these new products to our existing customers as well as expand our customer base. |
• | Highly Efficient Manufacturing Capabilities. Our manufacturing strategy is focused on optimizing our asset utilization across our power management products, which enables us to maintain the price competitiveness of our products through our low-cost operating structure and improve our operational efficiency. We believe the location of our primary manufacturing and research and development facilities in Asia and the relatively low need for ongoing capital expenditures provide us with a number of cost advantages. |
Our Strategy
Our objective is to grow our business, cash flow and profitability and to continue strengthening our position in the semiconductor industry as a leading provider of analog and mixed-signal semiconductor products for high-volume markets. Our business strategy emphasizes the following key elements:
• | Increase Business with Existing Customers. We have a global customer base consisting of leading consumer electronics original equipment manufacturers (“OEMs”) that sell to multiple end markets. We intend to continue to strengthen our relationships with our customers by collaborating on critical design and product development in order to improve our design-win rates. We seek to increase our customer penetration by more closely aligning our product roadmap with those of our key customers and take advantage of our broad product portfolio, our deep knowledge of customer needs and existing relationships to sell more existing and new products. |
• | Broaden Our Customer Base. We expect to continue to expand our global customer base, particularly in China, Hong Kong, and Taiwan, and other high-growth geographies, to penetrate new accounts. In addition, we intend to introduce new products and variations of existing products to address a broader customer base. In order to broaden our market penetration, we are complementing our direct customer relationships and sales with an improved base of distributors, with a particular focus on the growth of our power management business. |
• | Drive Execution Excellence. We intend to improve our execution through a number of management initiatives, new processes for product development, customer service and personnel development. We expect these ongoing initiatives will contribute to improvement of our new product development and customer service as well as enhance our commitment to a culture of quick action and execution by our workforce. In addition, we have focused on improving our manufacturing efficiency during the past several years. |
• | Return on Capital Investments and Cash Flow Generation. We manufacture our Power discrete products by utilizing our in-house manufacturing facility and external foundry to address a broad portfolio of power products while we seek to maximize return on capital investments and our cash flow generation. We intend to keep our capital expenditures relatively low by maintaining our focus on specialty process technologies that do not require substantial investment in frequent upgrades to the latest manufacturing equipment. However, from time to time, we make special investments to enhance our manufacturing capabilities by investing in new equipment and expanding our facility, which we expect will have a positive impact on our future new product development and revenue, particularly during the period of global shortage of capacity. |
6
Our Technology
We continuously strengthen our advanced analog and mixed-signal semiconductor technology platform by developing innovative technologies and integrated circuit building blocks that enhance the functionality of electronics devices through brighter, thinner displays, enhanced image quality, smaller form factor and longer battery life. Our goal is to leverage our experience and development initiatives across multiple end markets and utilize our understanding of system-level issues our customers face to introduce new technologies that enable our customers to develop more advanced, higher performance products.
Our display technology portfolio includes building blocks for display drivers and timing controllers, processor and interface technologies, as well as sophisticated production techniques, such as chip-on-glass (COG), chip-on-film (COF) and chip-on-plastic (COP) for rigid and flexible OLED displays. Our advanced display drivers incorporate Oxide, Low-Temperature Poly Silicon (LTPS), Low-Temperature Polycrystalline Oxide (LTPO) OLED panel technologies that enable the highest resolution displays.
Expertise in ultra-high voltage (UHV), high voltage and deep trench BCDMOS process technologies, low power analog and mixed-signal design capabilities and packaging know-how are key requirements in the power management market. We are currently leveraging our capabilities in these areas with products such as AC-DC/DC-DC converters, LED drivers, regulators, PMICs, power MOSFETs and IGBTs. We believe our system-level understanding of applications such as LCD televisions, smartphones, computing, and servers, automotive, and industrial applications will allow us to more quickly develop and customize power management solutions for our customers in these markets.
Products by Business Line
Our broad portfolio of products addresses multiple high-growth, consumer-focused end markets. A key component of our product strategy is to supply multiple related product offerings to each of the end markets that we serve.
Mixed-Signal Solutions Business Line
Display IC products
Display Driver Characteristics. Display drivers deliver defined analog voltages and currents that activate pixels to exhibit images on displays. The following key characteristics determine display driver performance and end-market application:
• | Resolution and Number of Channels. Resolution determines the level of detail displayed within an image and is defined by the number of pixels per line multiplied by the number of lines on a display. For large displays, higher resolution typically requires more display drivers for each panel. Display drivers that have a greater number of channels, however, generally require fewer display drivers for each panel and command a higher selling price per unit. Mobile displays, conversely, are typically single chip solutions designed to deliver a specific resolution. We cover resolutions ranging from VGA (640 x 480) to UHD (3840 x 2160). |
• | Color Depth. Color depth is the number of colors that can be displayed on a panel. For example, for TFT-LCD panels, 262 thousand colors are supported by 6-bit source drivers; 16 million colors are supported by 8-bit source drivers; and 1 billion colors are supported by 10-bit source drivers. |
• | Operational Voltage. Display drivers are characterized by input and output voltages. Source drivers typically operate at input voltages from 1.62 to 3.6 volts and output voltages between 9 and 18 volts. Gate drivers typically operate at input voltages from 1.62 to 3.6 volts and output voltages from 30 to 45 volts. Lower input voltage results in lower power consumption and electromagnetic interference (EMI). |
• | Gamma Curve. The relationship between the light passing through a pixel and the voltage applied to the pixel by the source driver is referred to as the gamma curve. The gamma curve of the source driver can correct some imperfections in picture quality in a process generally known as gamma correction. Some advanced display drivers feature up to three independent gamma curves to facilitate this correction. |
7
• | Driver Interface. Driver interface refers to the connection between the timing controller and the display drivers. Display drivers increasingly require higher bandwidth interface technology to address the larger data transfer rate necessary for higher definition images. The principal types of interface technologies are embedded clock point to point interface (EPI), mini-low voltage differential signaling (m-LVDS), unified standard interface (USI) and mobile industry processor interface (“MIPI”). |
• | Package Type. The assembly of display drivers typically uses COF, COG and COP package types. |
• | Large Display Solutions. We provide display solutions for a wide range of flat panel display sizes used in LCD TVs, OLED TVs, Micro LED TVs as well as IT applications such as monitors, notebook PCs, tablet PCs, automobiles and public information displays. |
Our large display solutions include source and gate drivers and timing controllers with a variety of interfaces, voltages, frequencies and packages to meet customers’ needs. These products include advanced technologies such as high channel count, with products in mass production to provide up to 1,542 channels. Our large display solutions are designed to allow customers to cost-effectively meet the increasing demand for high resolution displays. We have focused extensively on reducing the die size of our large display drivers and other solutions products to reduce costs without having to migrate to smaller geometries. For example, we have implemented several solutions to reduce die size in large display drivers, such as optimizing design schemes and design rules and applying specific technologies that we have developed internally.
The table below sets forth the features of our products, both in mass production and in customer qualification, which is the final stage of product development, for large-sized displays:
Product |
Key Features |
Applications | ||
TFT-LCD Source Drivers |
• 480 to 1,542 output channels • 6-bit (262 thousand colors), 8-bit (16 million colors), 10-bit (1 billion colors) • Output voltage ranging from 9V to 18V • Low power consumption and low EMI • COF package types • EPI, m-LVDS, USI interface technologies |
• LCD/LED TVs • Notebooks • LCD/LED monitors • Automotive | ||
TFT-LCD Gate Drivers |
• 272 to 960 output channels • Output voltage ranging from 30V to 45V • COF and COG package types |
• Tablet PCs • LCD/LED TVs • Notebooks • Automotive | ||
Timing Controllers |
• Wide range of resolutions • EPI, m-LVDS, MIPI, USI-T interface technologies • Input voltage ranging from 1.6V to 3.6V |
• Tablet PCs • Public information display | ||
OLED Source Drivers |
• 960 output channels • 10 bit (1 billion colors) • Output voltage: 18V • COF package type • EPI interface technology |
• OLED TVs | ||
Micro LED Drivers |
• 480 to 552 output channels (3 Mux) • 10 bit (1 billion colors) • Output voltage: max 18V • COF package type • USI interface technology |
• Micro LED TVs |
8
Mobile Display Solutions. Our mobile display solutions incorporate the industry’s most advanced display technologies, such as OLED and LTPS, as well as high-volume technologies such as a-Si TFT. Our mobile display products offer specialized capabilities, including high speed serial interfaces, such as mobile display digital interface (“MDDI”), MIPI, reduced swing differential signaling interface (RSDS) and logic-based OTP memory. Our OLED driver ICs can support various configurations such as high resolution from FHD+(2,880x1,284) to QHD+(3,360x1,440), wide aspect ratio from 16:9 to 21:9 and rigid and flexible OLED displays. In the transition to, and adoption of, 5G, fast responses and high frame rates such as 90Hz, 120Hz and 144Hz are becoming essential product offerings. To meet this new and evolving demand, we have developed and mass produced our OLED display driver IC, which supports 90Hz/120Hz/144Hz high frame rates.
The following table summarizes the features of our products, including those in mass production and those undergoing customer qualification, which is the final stage of product development, for mobile displays:
Product |
Key Features |
Applications | ||
OLED |
• Resolutions of HD720, WXGA, FHD, FHD+, QHD and QHD+ • Aspect ratio from 16:9 to 21:9 • Color depth of 1 billion • MIPI, eRVDS interface • Logic-based OTP • Image enhancement IP • Display data compression IP |
• Smartphones • Game consoles • Digital still cameras • Tablet PCs • Virtual reality headsets • Automotive | ||
LTPS |
• Resolutions of VGA, WSVGA, WVGA and DVGA • Color depth of 16 million • MDDI, MIPI interface • Logic-based OTP • Separated gamma control |
• Smartphones • Digital still cameras | ||
a-Si TFT |
• Resolutions of WQVGA and HVGA • Color depth of 16 million • RSDS, MDDI, MIPI interface • CABC • Separated gamma control |
• Mobile phones • Digital still cameras • Automotive |
Power IC products
We develop, manufacture and market power management solutions for a wide range of end-market customers. Our products include AC-DC/DC-DC converters, LED drivers, regulators, PMICs for a range of devices, including LCD, LED, and UHD televisions, digital signage, smartphones, wearable devices, notebooks, tablet PCs, other consumer electronics, and consumer appliances.
• | AC-DC/DC-DC Converters. We offer AC-DC/DC-DC converters targeting mobile applications and high-power applications like LCD, LED, and UHD televisions, notebooks, smartphones, mobile phones, set-top boxes and display modules. We expect our AC-DC/DC-DC converters will meet customers’ green power requirements by featuring wide input voltage ranges, high efficiency and small size. |
• | LED Drivers. LED backlighting drivers serve the fast-growing LCD and LED panel backlighting market for LCD and LED televisions, LCD monitors, digital signage, notebooks, smartphones and tablet PCs. Our |
9
products are designed to provide high efficiency and a wide input voltage range, as well as pulse width modulation (PWM) dimming for accurate white LED dimming control. LED lighting drivers have a wide input voltage range applicable to incandescent bulbs and fluorescent lamp replacement. |
• | Regulators. We also provide analog regulators for mobile, computing and consumer applications. Our products are designed to deliver high efficiency and low power consumption in mobile applications. |
• | SSD PMICs. We also provide solid-state drive power management integrated circuits (SSD PMICs) for the computing segment. Our products are designed for high frequency switching, high efficiency and pulse frequency modulation (PFM) functions to reduce power consumption in low load converters. |
• | Logic PMICs. We also provide logic PMICs for organic light-emitting diode (OLED) display panel. Our PMICs provide optimized power to source driver, gate driver and timing controller (T-CON) of OLED display panel through a multi-channel power block (boost converter, buck converter, Op-Amps and positive/negative LDOs). |
Our power IC solutions help customers enhance system stability and improve hear dissipation and energy use, resulting in cost savings for our customers and consumers, as well as environmental benefits. Power IC utilizes standard BCD process technologies which can be sourced from multiple foundries.
The following table summarizes the features of our products, including those in mass production and those undergoing customer qualification, which is the final stage of product development:
Product |
Key Features |
Applications | ||
AC-DC/DC-DC Converter |
• Wide control range for high power application (>150W) • Advanced BCDMOS process • High Precision Voltage Reference • Very low startup current consumption • Fast load and line regulation • Accurate output voltage • OCP, SCP and thermal protections |
• LCD/LED/UHD TVs • Power supplies • Smartphones • Mobile phones • Notebooks • Set-top boxes | ||
LED Backlighting Drivers |
• High efficiency, wide input voltage range • Advanced BCDMOS process • OCP, SCP, OVP and UVLO protections • Accurate LED current control and multi-channel matching • Programmable current limit, boost up frequency |
• Tablet PCs • Notebooks • Smartphones • LED/UHD TVs • LED monitors | ||
Digital Controlled LED Driver |
• Multi-channel constant current control • 12Bit gray scale with SPI |
• Digital signage | ||
LED Lighting Drivers |
• High efficiency, wide input voltage range • Simple solutions with external components fully integrated • Advanced high voltage BCDMOS process • Accurate LED current control and high power factor and low THB |
• AC and DC LED lighting |
10
Product |
Key Features |
Applications | ||
Regulators |
• Single and multi-regulators • Low Noise Output regulators • Wide range of input voltage and various output current • CMOS and BCDMOS processes • LDO (Low Drop Out — Linear Regulator) |
• Smartphones and Mobile phones • Notebooks • Computing applications | ||
SSD PMIC |
• High current buck • PFM function • High frequency switching • High efficiency • High integration technology • Small QFN package |
• Computing applications | ||
Logic PMIC |
• High current boost • Integrated pass transistor • LDO • 3channel high current buck • Negative Charge Pump • 2channel buffer Op-Amp. • Tiny Wafer Level CSP |
• Notebooks • Tablet PCs |
Power Analog Solutions Business Line
Power discrete products
We develop, manufacture and market power management solutions for a wide range of end-market customers. The products include MOSFETs and IGBTs for a range of devices, including LCD, LED, and UHD televisions, digital signage, smartphones, mobile phones, wearable devices, desktop PCs, notebooks, tablet PCs, other consumer electronics, consumer appliances, automotive, and industrial applications such as power suppliers, e-bikes, photovoltaic inverters, LED lighting and motor drives.
• | MOSFETs. Our MOSFETs include low-voltage from 12V to 30V, medium-voltage from 40V to 200V, high-voltage planar MOSFETs, 200V through 650V, and super junction MOSFETs, 250V through 900V. |
MOSFETs are used in applications to switch, shape or transfer electricity under varying power requirements. The key application segments are smartphones, mobile phones, wearable devices, LCD, LED, and UHD televisions, desktop PCs, notebooks, tablet PCs, servers, lighting and power supplies for consumer electronics automotive (electric vehicles) and industrial equipment. MOSFETs allow electronics manufacturers to achieve specific design goals of high efficiency and low standby power consumption. For example, computing solutions focus on delivering efficient controllers and MOSFETs for power management in VCORE, DDR and chipsets for audio, video and graphics processing systems.
• | IGBTs. Our IGBTs include 650V to 1200V field stop trench IGBTs. IGBTs are used in automotive and high power industrial applications, such as UPSs, power supplies, motor drives, solar inverters, welding machines and consumer appliances. |
Our power management solutions enable customers to increase system stability and improve heat dissipation and energy use, resulting in cost savings for our customers and consumers, as well as environmental benefits. Our in-house process technology capabilities and eight-inch wafer production lines increase efficiency and contribute to the competitiveness of our products.
11
The following table summarizes the features of our products, including those in mass production and those undergoing customer qualification, which is the final stage of product development:
Product |
Key Features |
Applications | ||
Low Voltage MOSFET |
• Voltage options of 12V-30V • Advanced Trench MOSFET Process • High cell density • Advanced packages to enable reduction of PCB mounting area |
• Smartphones, mobile phones, and wearable devices • Tablet PCs, Notebooks • Desktop PCs, Servers • LCD/LED TVs • Industrial applications • Automotive | ||
Medium Voltage MOSFET |
• Voltage options of 40V-200V • Advanced Trench MOSFET Process • High cell density • High system efficiency • Advanced packages to enable reduction of PCB mounting area |
• e-Bikes and Motor controls • Battery Management Systems • Power tools and Servers • Energy Storage System • Other computing applications (Tablet PCs, Notebooks, Desktops) • Consumer applications (TV) • Industrial applications • Automotive | ||
High Voltage MOSFET |
• Voltage options of 200V-650V • R2FET (rapid recovery) option to shorten reverse diode recovery time • Zener diode option for MOSFET protection for abnormal input • Advanced Planar MOSFET Process • Advanced packages to enable reduction of PCB mounting area |
• Adaptors for tablet PC/mobile phone/smartphone • Power supplies • Lighting (ballast, HID, LED) • Industrial applications • LCD/LEDTVs • Automotive | ||
Super Junction MOSFET |
• Voltage options of 250V-900V • Low RDS(ON) • Epi stack process • Zener diode option for MOSFET protection for abnormal input • Advanced SJ MOSFET process • Advanced packages to enable reduction of PCB mounting area • Low power loss by high speed switching |
• LCD/LED/UHD TVs • Lightings applications (ballast, HID, LED) • Smartphones • Power supplies • Servers and Telecom powers • Industrial applications • EV charging station • On board charger | ||
IGBTs |
• Voltage options of 650V/1200V • Field Stop Trench IGBT • Current options from 15A to 100A |
• Automotive • Solar inverters • Industrial applications • Consumer appliances |
Sales and Marketing
We focus our sales and marketing strategy on continuing to grow and leverage our existing relationships with leading consumer electronics OEMs, while expanding into industrial and automotive end markets. We
12
believe our close collaboration with customers allows us to align our product and technology development with our customers’ existing and future needs. Because our customers often service multiple end markets, our product sales teams are organized by customers within the major geographies. We believe this facilitates the sale of products that address multiple end-market applications to each of our customers.
We sell our products through a direct sales force and a network of authorized agents and distributors. We have strategically located our sales and technical support offices near our customers. Our direct sales force consists primarily of representatives co-located with our design center in Korea, as well as our local sales and support offices and sales liaisons in Japan, Greater China, Taiwan and Europe. We have a network of agents and distributors in the U.S., Europe and the Asia Pacific region. For the years ended December 31, 2024 and 2023, we derived 32% and 34% of net sales from our standard products business through our direct sales force, respectively, and 68% and 66% of net sales from our standard products business through our network of authorized agents and distributors, respectively.
Customers
We sell our products to consumer, computing, communication, automotive and industrial electronics OEMs, original design manufacturers and electronics manufacturing services companies, as well as subsystem designers. For the years ended December 31, 2024 and 2023, our ten largest customers accounted for 74.1% and 69.2% of net sales from our standard products business, respectively. Our arrangements with and reliance on key customers, particularly customers for our display products, may make it less practicable to pursue certain opportunities with other potential new and existing customers. For the year ended December 31, 2024, sales to SAMT represented 21.4% of net sales from our standard products business, and Samsung Display represented 14.7% of net sales from our standard products business. For the year ended December 31, 2023, sales to SAMT represented 16.7% of net sales from our standard products business, and Samsung Display represented 13.4% of net sales from our standard products business. For the year ended December 31, 2024, we recorded revenues of $2.1 million from customers in the U.S. and $219.0 million from all foreign countries, of which 43.7% was from Greater China and 39.3% was from Korea. For the year ended December 31, 2023, we recorded revenues of $2.8 million from customers in the U.S. and $192.9 million from all foreign countries, of which 41.4% was from Greater China and 34.6% was from Korea. All information pertaining to the geographic source of revenues is with respect to the geographic location to which our products are billed.
Intellectual Property
As of December 31, 2024, our portfolio of intellectual property assets included approximately 836 registered patents and 166 pending applications. Approximately 304 and 46 of our registered patents and pending applications, respectively, are novel in that they are not a foreign counterpart of an existing registered patent or pending application. Because we file patents in multiple jurisdictions, we additionally have approximately 532 registered patents and 110 pending applications that relate to identical technical claims in our base patent portfolio. Our registered patents expire at various times approximately over the next 19 years. While these patents are, in the aggregate, important to our competitive position, we do not believe that any single registered patent or pending application is material to us.
See “Item 1A. Risk Factors—Risks Related to Our Business—Our ability to compete successfully and achieve future growth will depend, in part, on our ability to protect our intellectual property, proprietary technology and know-how, as well as our ability to operate without infringing the proprietary rights of others.”
National Core Technology
Under the Act on Prevention of Leakage and Protection of Industrial Technology of Korea (the “ITA”), any export (including various means of outflow such as sale or transfer outside Korea) of technology designated as “national core technology” (“National Core Technology” or “NCT”) by the Korean Ministry of Trade, Industry
13
and Energy (the “MOTIE”) requires the filing of a prior-report with, and the acceptance of the same by, the MOTIE. Any such export of NCT without the acceptance of the prior report with the MOTIE may be subject to corrective orders by the relevant authorities, and failure to comply with such corrective orders may potentially result in criminal liabilities.
The Notification Regarding Designation of National Core Technologies issued by the MOTIE was amended on July 14, 2021 to add certain technologies to the list of National Core Technology designated by the MOTIE, and the amended list includes the OLED Display Driver IC (“OLED DDI”) design technology for driving display panels. Since then, the Act on Special Measures for Strengthening and Protecting the Competitiveness of the National High-Tech Strategic Industry (the “Special Act”) was enacted and became effective on August 4, 2022, and more recently, on June 2, 2023, the MOTIE designated 17 technologies, including the OLED DDI design technology for driving display panels, as National High-Tech Strategic Technology (“NHST”) under the Special Act. Under the Special Act, any export of NHST requires prior approval from the MOTIE. Any such export of NHST without the approval of the MOTIE may be subject to corrective orders by the relevant authorities and may also be subject to criminal sanctions.
In the ordinary course of business, one of our Korean subsidiaries, Magnachip Mixed-Signal, Ltd., may provide certain information relating to its products, including OLED DDI, to customers, suppliers or vendors, and such disclosure of information may be subject to the NCT-related regulations under the ITA and NHST-related regulations under the Special Act, and therefore the MOTIE’s acceptance of prior-reports (under the ITA) and the MOTIE’s prior approval (under the Special Act). Since the amendment of the foregoing NCT list in July 2021, we have filed prior-reports and applications for prior approval with the MOTIE for the export of our OLED DDI product-related information to certain overseas vendors that manufacture our products, and all such reports and applications have thus far been accepted and approved by the MOTIE.
Competition
We operate in highly competitive markets characterized by rapid technological change and continually advancing customer requirements. Although no one company competes with us in all of our product lines, we face significant competition in each of our market segments. Our competitors include other independent and captive manufacturers and designers of analog and mixed-signal integrated circuits, including display driver and power management semiconductor devices.
We compete based on design experience, manufacturing capabilities, the ability to satisfy customer needs from the design phase through the shipping of a completed product, length of design cycle and quality of technical support and sales personnel. Our ability to compete successfully will depend on internal and external variables, both within and outside of our control. These variables include the timeliness with which we can develop new products and technologies, product performance and quality, manufacturing yields, capacity availability, customer service, pricing, industry trends and general economic trends.
Human Capital
Our worldwide workforce consisted of 881 employees (full- and part-time) as of December 31, 2024, of which 206 were involved in sales, marketing, general and administrative, 220 in research and development (including 87 with advanced degrees), 40 in quality, reliability and assurance, and 415 in manufacturing (comprised of 39 in engineering and 376 in operations, maintenance and others). Our employees leverage their extensive expertise in engineering, design and process to accelerate the advancement of technology and be leaders in our industry. We pride our company on being a great workplace where employees from diverse backgrounds can reach their full potential.
Labor Unions
As disclosed in previous reports, we have a labor union at our Korean subsidiary, Magnachip Semiconductor, Ltd., (the “First Union”). On September 16, 2021, the formation of a second labor union at our
14
Korean subsidiary, Magnachip Semiconductor, Ltd., (the “Second Union”) was approved by local authorities (the First Union and the Second Union are collectively referred to as the “Magnachip Semiconductor Labor Unions”). Both the First Union and the Second Union are members of a supervisory association named “Federation of Korean Trade Unions.” The First Union represents member employees who are factory workers and the Second Union represents member employees who are office workers, in both cases at our Korean subsidiary.
As of December 31, 2024, of the 833 employees at our Korean subsidiaries, 380 employees at Magnachip Semiconductor, Ltd. were represented by the First Union, and 73 employees at Magnachip Semiconductor, Ltd. were represented by the Second Union. Approximately 54% of our employees at our Korean subsidiaries were represented by the Magnachip Semiconductor Labor Unions.
See “Item 1A. Risk Factors—Risks Related to Our Business—If we encounter future labor problems, we may fail to deliver our products and services in a timely manner, which would adversely affect our revenues and profitability.”
Values and Culture
Our core values represent a commitment to building an environment of trust with our employees, customers, investors and the communities in which we operate. Through our values and culture, we strive to shape a better future not only for ourselves and our customers, but for humanity as a whole. At Magnachip, we strive to foster effective collaboration by respecting different perspectives, giving and receiving constructive feedback, and supporting one another.
Inclusion and Diversity
We support all employees, regardless of gender, gender identity or expression, age, veteran status, race, ethnicity, national origin, religion or disability. We place great importance on inclusion and diversity within the workplace, and believe that an inclusive and diverse culture creates a happier, more relaxed work environment.
Labor and Ethics
Magnachip strives to provide and maintain a working environment where management and employees are happy and treated with dignity and respect. Magnachip adheres to human rights and labor standards of international labor organizations, such as the United Nations and the International Labor Organization. Magnachip prohibits all forms of discrimination based on gender, race, nationality, religion and age to ensure all employees work in a safe and fair environment.
Empowering Great Talent
We offer a variety of offline training programs, including courses in the areas of design, engineering and technology, as well as courses at different job levels and leadership education. We also offer a number of online training programs, including in the areas of management/leadership and business skills such as presentation, negotiation, reporting, Information Technology and foreign language, which allow employees to improve their capabilities without time and space constraints. Every year, a majority of our employees are required to complete certain educational programs in the areas of information security, industrial safety and health, and sexual harassment prevention.
We believe the foundation of Magnachip is our research and development (“R&D”) talent. To ensure R&D technical professionals continue to advance their skills and knowledge, we have technology committees that attend regular seminars and conduct periodic research. We have a reward program for exemplary research.
We also offer a Vision Seminar, which is led by our CEO and is designed to share our company’s vision, strategy and the management’s key messages to employees. Additionally, the CEO and management regularly communicate with employees through CEO letters and town hall meetings.
15
Compensation and Benefits
We strive to reward employees with competitive compensation based on contribution and performance. We periodically evaluate market practices for compensation and benefits, including with respect to job function, role and responsibility, job level and region, and regularly review whether our compensation levels and distribution methods are fair and equitable. Additionally, we have long-and mid-term retention programs to attract and retain high-performing key talent.
We offer various employee benefits under the company philosophy that ensuring employees enjoy a happier life with their families is as critical as promoting their own health and well-being. All employees and their family members have access to annual medical checkup programs. Employees also have access to other benefits such as personal pensions, housing assistance, medical reimbursement plans and educational assistance programs.
Safety and Wellness
We appreciate the fact that our employees constitute one of the most critical assets of Magnachip, and therefore, their safety and wellness are key factors to our success. We have a dedicated Environmental Health & Safety (“EHS”) team that establishes and reviews internal EHS regulations based on international agreements as well as local laws and regulations. Our EHS team is also responsible for identifying, evaluating and improving EHS issues within the overall manufacturing process to ensure a safe and comfortable work environment. Magnachip has implemented and maintains an Occupational Health and Safety Management System as well as an Environmental Management System. Our sites are certified to the internationally recognized ISO 45001 and ISO 14001 standards.
In January 2021, the Korean legislature enacted the Serious Accident Punishment Act (“SAPA”), which imposes criminal liability on individuals and entities responsible for “serious accidents,” including industrial accidents that cause death, serious injury or occupational illness. SAPA essentially requires enterprises to establish relevant standards and measures to ensure a certain level of operational safety, including the health and safety of all employees. SAPA went into effect in January 2022, and in connection therewith, we appointed Mr. Seunghoon Lee as the Chief Safety Officer of Magnachip Semiconductor, Ltd. (“MSK”), who then formed a dedicated team to evaluate, improve and monitor the policies, practices, standards and systems relating to health and safety to ensure compliance with SAPA. Mr. Lee, who has over 35 years of manufacturing and industrial EHS experience at Magnachip, concurrently serves as the Chief of Manufacturing of MSK.
Environmental
We are subject to a variety of environmental, health and safety laws and regulations in each of the jurisdictions in which we operate, governing, among other things, air emissions, wastewater discharges, the generation, use, handling, storage and disposal of, and exposure to, hazardous substances (including asbestos) and waste, soil and groundwater contamination and employee health and safety. These laws and regulations are complex, change frequently and have tended to become more stringent over time. Since 2015, our Korean subsidiaries have been subject to a new set of greenhouse gas emissions regulation, the Korean Emissions Trading Scheme, or K-ETS, under the Act on Allocation and Trading of Greenhouse Gas Emission Allowances. Under K-ETS, our Korean subsidiaries were allocated a certain amount of emissions allowance in accordance with the National Allocation Plan prepared by the Korean government and is required to meet its allocated target by either reducing the emission or purchasing the allowances from other participants in the emission trading market.
Another example is the regulations on chemicals under Chemicals Control Act and K-REACH, which came into effect on January 1, 2015. Under these laws, our Korean subsidiaries are required to comply with various requirements to report, evaluate, manage and ensure the safe usage of the chemicals used in its facilities. There can be no assurance that we have been or will be in compliance with all of these laws and regulations, or that we
16
will not incur material costs or liabilities in connection with these laws and regulations in the future. The adoption of new environmental, health and safety laws and the failure to comply with new or existing laws or issues relating to hazardous substances could subject us to material liability (including substantial fines or penalties), impose the need for additional capital equipment or other process requirements upon us, curtail our operations or restrict our ability to expand operations.
Raw Materials
We use processes that require specialized raw materials that are generally available from a limited number of suppliers. We continue to attempt to qualify additional suppliers for our raw materials. The Securities and Exchange Commission (the “SEC”), as mandated by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, has adopted disclosure regulations for public companies that manufacture products containing certain minerals that are mined from the Democratic Republic of Congo and adjoining countries. These “conflict minerals” are commonly found in metals used in the manufacture of semiconductors. The implementation of these requirements could adversely affect the sourcing, availability and pricing of metals used in the manufacture of our products. See “Item 1A. Risk Factors—Risks Related to Our Business—Compliance with regulations regarding the use of “conflict minerals” could limit the supply and increase the cost of certain raw materials used in manufacturing our products.”
Available Information
Our principal executive office is located at: c/o Magnachip Semiconductor, Ltd., 15F, 76, Jikji-daero 436beon-gil, Heungdeok-gu, Cheongju-si, Chungcheongbuk-do, 28581, Republic of Korea, and our email address is investors@magnachip.com. Our website address is www.magnachip.com. Our annual, quarterly and current reports on Forms 10-K, 10-Q or 8-K, respectively, and all amendments thereto filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, can be accessed, free of charge, at our website as soon as practicable after such reports are filed with the SEC. In addition, our Corporate Governance Guidelines, Code of Business Conduct and Ethics, Compensation Recovery Policy, Audit Committee Charter, Compensation Committee Charter, Nominating and Governance Committee Charter and Risk Committee Charter are available on our website. Information contained on our website does not constitute, and shall not be deemed to constitute, part of this Report and shall not be deemed to be incorporated by reference into this Report. In addition, the SEC maintains an internet site, www.sec.gov, from which you can access our annual, quarterly and current reports on Form 10-K, 10-Q and 8-K, respectively, and all amendments to these materials after such reports and amendments are filed with the SEC. You may also request a copy of these filings, at no cost, by writing or telephoning us at the following address or phone number: c/o Magnachip Semiconductor, Ltd., 15F, 76 Jikji-daero 436beon-gil, Heungdeok-gu, Cheongju-si, Chungcheongbuk-do, 28581, Republic of Korea; Attention: Investor Relations; email address: investors@magnachip.com.
Information About Our Executive Officers
The following table sets forth certain information regarding our current executive officers:
Name |
Age | Position | ||||
Young-Joon (YJ) Kim |
60 | Director and Chief Executive Officer | ||||
Shin Young Park |
44 | Chief Financial Officer | ||||
Theodore Kim |
55 | Chief Compliance Officer, General Counsel and Secretary | ||||
Seunghoon Lee |
66 | Acting Co-General Manager of Power Analog Solutions | ||||
Jinseok Yang |
50 | Acting Co-General Manager of Mixed-Signal Solutions |
Young-Joon (YJ) Kim, Director on the Board of Directors, Member of the Risk Committee and Chief Executive Officer. Mr. YJ Kim became our Chief Executive Officer in May 2015 and has also served as a director on our Board since that time. In February 2023, Mr. Kim held the additional role of Acting Co-General
17
Manager of our Power business to capitalize on the attractive growth opportunities in the Power sector. In February 2020 to February 2023, Mr. Kim assumed the additional role of General Manager of the Display business to capitalize on the attractive growth opportunities in OLED display and other relevant emerging markets. He also served as the acting General Manager of Foundry Services Group from January 2019 until the completion of the sale of the Foundry Services Group and the factory in Cheongju (“Fab 4”) on September 1, 2020. Mr. Kim joined our company in May 2013 and served as our Executive Vice President and General Manager, Display Solutions Division. He was promoted to Interim Chief Executive Officer in May 2014. Prior to joining our company, Mr. Kim held a variety of senior management roles at several global semiconductor firms. His past roles include marketing, engineering, product development and strategic planning, and his product expertise includes microprocessors, network processors, multi-core processors, FLASH, EPROM, analog, mixed-signal, sensors, 3G/4G/5G base stations, workstations and servers. Immediately before joining our company, Mr. Kim served as Vice President, Infrastructure Processor Division, and General Manager of the OCTEON Multi-Core Processor Group of Cavium, Inc., where he worked from 2006 to 2013. Prior to Cavium, Mr. Kim served as Core Team Lead and General Manager of the Tolapai Program at Intel Corporation from 2004 to 2006. In 1998, Mr. Kim co-founded API Networks, a joint venture between Samsung and Compaq, where he served as the head of product management, worldwide sales and business development for Alpha processors. Prior to API Networks, Mr. Kim served as Director of Marketing at Samsung Semiconductor, Inc. from 1996 to 1998. Mr. Kim began his career as a product engineer at Intel Corporation in 1988. Mr. Kim holds B.S. and M. Eng. degrees in Electrical Engineering from Cornell University. Our Board has concluded that Mr. YJ Kim is a valuable member of the Board based on his understanding of our company’s products and technology as our Chief Executive Officer and his deep knowledge of the semiconductor industry.
Shin Young Park, Chief Financial Officer. Ms. Shin Young Park became our Chief Financial Officer in January 2022 and became our Chief Accounting Officer in March 2020. Ms. Park previously served as the Company’s Corporate Controller from November 2018 to February 2020. Prior to that, she served as the SEC Reporting and Accounting Director from April 2015 to October 2018. Before joining the Company in April 2014, from 2005 to March 2014, Ms. Park served in various senior advisory and audit service positions at Deloitte, a public accounting firm. From 2005 to 2009, she worked at Deloitte & Touche in Chicago, Illinois; from 2009 to 2011 and then from 2013 to March 2014, she worked at Deloitte Anjin in Seoul, South Korea; and from 2011 to 2013, she worked at Deloitte in London, U.K. Ms. Park holds a B.A. degree in business administration from Sogang University, Seoul, Korea, and a Master’s degree in hospitality industry studies from New York University.
Theodore Kim, Chief Compliance Officer, General Counsel and Secretary. Mr. Theodore (“Ted”) Kim became our Chief Compliance Officer in May 2015 and became our General Counsel and Secretary in November 2013. Mr. Kim previously served as our Senior Vice President from November 2013 to May 2015. Prior to joining Magnachip, Mr. Kim served as Head Lawyer, Global Business Development at Samsung Fire & Marine Insurance from October 2012 to October 2013. Mr. Kim was employed by Gibson Dunn, a law firm, from October 2005 to July 2012, serving most recently as Of Counsel. Prior to that, he served as Foreign Legal Consultant at Kim & Chang, a law firm in Korea, from 2001 to 2005, and prior to that, he worked as an associate attorney at Morrison & Foerster, a law firm, from 1997 to 2001. Mr. Kim holds a B.A. degree in Economics and a B.S. degree in Mechanical Engineering from University of California, Irvine, and a J.D. degree from University of California, Los Angeles, School of Law.
Seung Hoon Lee, Acting Co-General Manager of Power Analog Solutions, Chief of Manufacturing & Operations, and Chief Safety Officer. Mr. Seung Hoon Lee was named Acting Co-General Manager of Power Analog Solutions in May 2024. He has been serving as our Chief of Manufacturing and Operations, Chief Safety Officer and Acting Head of Labor Relations since 2020. Prior to that, Mr. Lee served as Chief of Manufacturing for the factories in Cheongju and Gumi, Korea from 2015 to 2020. He was Chief of Manufacturing for the Gumi factory from 2012 to 2015 and for the Cheongju factory from 2007 to 2012. Mr. Lee holds a B.S. degree in Electronic Engineering from Chosun University.
18
Jinseok Yang, Acting Co-General Manager and Assistant General Manager of Mixed-Signal Solutions. Mr. Jinseok Yang became our Acting Co-General Manager of Mixed-Signal Solutions in August 2024 and became our Assistant General Manager of Display Solutions in February 2020. Prior to that, Mr. Yang served as Head of Display Design from 2015 to 2020. Prior to that, Mr. Yang served as Head of Mobile Display Driver IC from 2012 to 2015. Mr. Yang holds a B.S. degree in Electronic Engineering from Sungkyunkwan University, and a Master’s degree in Electronic Engineering from Pohang University of Science and Technology.
Item 1A. Risk Factors
You should carefully consider the risk factors set forth below as well as the other information contained in this Report. Any of the following risks could materially and adversely affect our business, financial condition or results of operations. As a result, the price of our common stock could decline and you could lose all or part of your investment in our common stock. Additional risks and uncertainties not currently known to us or those currently viewed by us to be immaterial may also materially and adversely affect our business, financial condition or results of operations.
Risk Factors Summary
The following is a summary of the risk factors included herein.
• | We manufacture our products based on our estimates of customer demand, and if our estimates are incorrect, our financial results could be negatively impacted. |
• | A significant portion of our sales comes from a relatively limited number of customers, the loss of which could adversely affect our financial results. |
• | The average selling prices of our semiconductor products have at times declined rapidly and will likely do so in the future, which could harm our revenue and gross profit. |
• | We may fail to realize all of the anticipated benefits of our operational initiatives, including the strategic options for exiting our Display business, or those benefits may take longer to realize or be more expensive than expected. |
• | We are subject to risks associated with currency fluctuations, and changes in the exchange rates of applicable currencies could impact our results of operations. |
• | Global shortages in manufacturing capacities could interrupt or negatively affect our operations, increase cost to manufacture and negatively impact our results of operations. |
• | Expanded trade restrictions may limit our ability to sell to certain customers. |
• | Recent changes in international trade policy and the imposition and threats of international tariffs, including tariffs applied to goods traded between the United States and other countries/regions, could materially and adversely affect our business and results of operations. |
• | Our Korean subsidiaries have been designated as a regulated business under Korean environmental law, and such designation could have an adverse effect on our financial position and results of operations. |
• | Our compliance with the Serious Accidents Punishment Act (the “SAPA”) could require significant expenditures and management time and expose us to liability for violations. |
• | Our business depends on international customers, suppliers and operations in Asia, and as a result we are subject to regulatory, operational, financial and political risks, which could adversely affect our financial results. |
• | We cannot guarantee that our share repurchase program will be successfully consummated, or that it will enhance shareholder value, and share repurchases could affect the price of our common stock. |
19
• | Provisions in our charter documents and Delaware Law may make it difficult for a third party to acquire us and could depress the price of our common stock. |
• | We have not historically paid dividends and do not currently have any dividend or distribution policy, and therefore, investors may need to rely on sales of their common stock as the only way to realize any future gains on their investments. |
• | Our indebtedness and liabilities could limit the cash flow available for our operations, expose us to risks that could adversely affect our business, financial condition and results of operations and impair our ability to satisfy our obligations under our debt instruments when they come due. |
Risks Related to Our Business
We operate in the highly cyclical semiconductor industry, which is subject to significant downturns that may negatively impact our results of operations.
The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change and price erosion, evolving technical standards, short product life cycles (for semiconductors and for the end-user products in which they are used) and wide fluctuations in product supply and demand. From time to time, these and other factors, together with changes in general economic conditions, cause significant upturns and downturns in the industry in general and in our business in particular. Periods of industry downturns have been characterized by diminished demand for end-user products, high inventory levels, underutilization of manufacturing capacity, changes in revenue mix and accelerated erosion of average selling prices. We have experienced these conditions in our business in the past and may experience renewed, and possibly more severe and prolonged, downturns in the future as a result of such cyclical changes. This may reduce our results of operations. Current global macroeconomic conditions, including higher inflation and interest rates and uncertainty caused by the Russian-Ukraine war, Israel-Hamas war, sustained military action and conflict in the Red Sea, and trade tensions between the U.S., China and other countries have led to weaker end-market demand and unstable supply chain. We continue to monitor these trends and uncertainties, and any decline in end-market demand and increase in inventory levels could negatively impact our financial condition and results of operations.
We base our planned operating expenses in part on our expectations of future revenue, and a significant portion of our expenses is relatively fixed in the short term. If revenue for a particular quarter is lower than we expect, we likely will be unable to proportionately reduce our operating expenses for that quarter, which would harm our operating results for that quarter.
Our restructuring activities and dispositions of assets and businesses could result in lost business and other costs that could have a material adverse effect on our results of operations.
From time to time, we may choose to sell assets, restructure business operations, shut down manufacturing lines or otherwise dispose of assets and businesses as part of management’s strategies to better align our product offerings with market demands and our customers’ needs. In connection with these activities, we face risks that we will disrupt service to our customers, lose business and incur significant costs related to such activities. These risks include potential damage to our reputation and customer relationships if we are unable to effectively transition such customer relationships to other production lines or products or if we cannot effectively manage our supplier and vendor relationships during such activities. In addition, we may also face claims or costs associated with transitioning or eliminating certain employee positions and modifying or terminating vendor relationships in connection with those exit activities.
We may fail to realize all of the anticipated benefits of our operational initiatives, including the strategic options for exiting our Display business, or those benefits may take longer to realize or be more expensive than expected.
On March 12, 2025, we announced that we are executing a strategy to transform Magnachip into a pure-play Power company. There can be no assurance that the exploration of strategic options for its Display business,
20
which is to be classified as discontinued operations when the Company reports first fiscal quarter 2025 results of operations, will result in a transaction on terms acceptable to us or other outcome that achieves our objectives. Even if a transaction or series of transactions or corporate actions were completed to exit the Display business, there can be no assurance as to the timing of completing these activities. Moreover, we may not realize any or all of the anticipated benefits from our pursuit of strategic options for our Display business, or the anticipated benefits from transitioning to a pure-play Power company, and such actions could in fact adversely affect our business. Our ability to realize the anticipated benefits of our strategy will depend, to a large extent, on our ability to continue to focus on Power discrete and Power IC products and to achieve expected growth in the absence of the Display businesses. Some of the anticipated benefits may not occur for a significant period of time. In addition, we may retain certain liabilities or obligations related to our Display business or incur certain costs in connection with executing on these strategic options, some of which may be material. The focus on becoming a pure-play Power company and the related strategic options for our Display business may not enhance long-term stockholder value as anticipated. Further, our strategic actions could result in near term restructuring charges and a material impairment of our goodwill and/or intangible assets, among other things.
Many of these factors will be outside of our control and any one of them could result in increased costs, including restructuring charges, decreases in the amount of expected revenues and diversion of management’s time and energy, which could adversely affect our business, financial condition and results of operations. In addition, the process of such strategic actions, including divesting or otherwise disposing of assets and businesses, carries an inherent risk of market fluctuations and economic uncertainties that could undermine the value we expect to realize from these strategies.
If we fail to develop new products and technologies or enhance our existing products in order to react to rapid technological change and market demands, our business will suffer.
Our industry is subject to constant and rapid technological change and product obsolescence as customers and competitors create new and innovative products and technologies. Products or technologies developed by other companies may render our products or technologies obsolete or noncompetitive, and we may not be able to access advanced process technologies, including smaller geometries, or to license or otherwise obtain essential intellectual property required by our customers.
We must develop new products and enhance our existing products to meet rapidly evolving customer requirements. We design products for customers that continually require higher performance and functionality at lower costs. We must, therefore, continue to enhance the performance and functionality of our products. The development process for these advancements is lengthy and requires us to accurately anticipate technological changes and market trends. Developing and enhancing these products is uncertain and can be time-consuming, costly and complex.
Customer and market requirements can change during the development of a product. There is a risk that these developments and enhancements will be late, fail to meet customer or market specifications or not be competitive with products from our competitors that offer comparable or superior performance and functionality. Any new products, such as our expanding line of power management solutions, or product enhancements, may not be accepted in new or existing markets. Our business will suffer if we fail to develop and introduce new products or product enhancements on a timely and cost-effective basis.
We manufacture our products based on our estimates of customer demand, and if our estimates are incorrect, our financial results could be negatively impacted.
We make significant decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimates of customer demand and expected demand for and success of their products. The short-term nature of commitments by many of our customers and the possibility of rapid changes in demand for their
21
products reduces our ability to estimate accurately future customer demand for our products. On occasion, customers may require rapid increases in supply, which can challenge our production resources and reduce margins. We may not have sufficient capacity at any given time to meet our customers’ increased demand for our products. Conversely, downturns in the semiconductor industry have caused and may in the future cause our customers to reduce significantly the amount of products they order from us. Because many of our costs and operating expenses are relatively fixed, a reduction in customer demand would decrease our results of operations, including our gross profit.
Our customers may cancel their orders, reduce quantities or delay production, which would adversely affect our margins and results of operations.
We generally do not obtain firm, long-term purchase commitments from our customers. Customers may cancel their orders, reduce quantities or delay production for a number of reasons. Cancellations, reductions or delays by a significant customer or by a group of customers, which we have experienced as a result of periodic downturns in the semiconductor industry, or failure to achieve design-wins, have affected and may continue to affect our results of operations adversely. These risks are exacerbated because many of our products are customized, which hampers our ability to sell excess inventory to the general market. We may incur charges resulting from the write-off of obsolete inventory. In addition, while we do not obtain long-term purchase commitments, we generally agree to the pricing of a particular product over a set period of time. If we underestimate our costs when determining pricing, our margins and results of operations would be adversely affected.
Our fab manufacturing depends on high utilization of our manufacturing capacity, a reduction of which could have a material adverse effect on our business, financial condition and the results of our operations.
An important factor in our success is the extent to which we are able to utilize the available capacity in our fabrication facility. As many of our costs are fixed, a reduction in capacity utilization, as well as changes in other factors, such as reduced yield or unfavorable product mix, could reduce our profit margins and adversely affect our operating results. A number of factors and circumstances may reduce utilization rates, including periods of industry overcapacity, the inability to source sufficient materials necessary for manufacturing, low levels of customer orders, operating inefficiencies, strategic evaluations and decisions by our Board related our overall business, divisions and business lines, mechanical failures and disruption of operations due to expansion or relocation of operations, power interruptions and fire, flood or other natural disasters or calamities. The potential delays and costs resulting from these factors and circumstances could have a material adverse effect on our business, financial condition and results of operations.
A significant portion of our sales comes from a relatively limited number of customers, the loss of which could adversely affect our financial results.
Historically, we have relied on a limited number of customers for a substantial portion of our total revenue. If we were to lose key customers or if customers cease to place orders for our high-volume products, particularly our display products, our financial results could be adversely affected. In addition, our arrangements with and reliance on key customers may make it less practicable to pursue certain opportunities with other potential new and existing customers. For the years ended December 31, 2024 and 2023, our ten largest customers accounted for 74.1% and 69.2% of net sales from our standard products business, respectively. For the year ended December 31, 2024, sales to SAMT represented 21.4% of net sales from our standard products business, and Samsung Display represented 14.7% of net sales from our standard products business. For the year ended December 31, 2023, sales to SAMT represented 16.7% of net sales from our standard products business, and Samsung Display represented 13.4% of net sales from our standard products business. Significant reductions in sales to any of these customers, especially our few largest customers, the loss of other major customers or a general curtailment in orders for our high-volume products within a short period of time could adversely affect our business.
22
The average selling prices of our semiconductor products have at times declined rapidly and will likely do so in the future, which could harm our revenue and gross profit.
The semiconductor products we develop and sell are subject to rapid declines in average selling prices. From time to time, we have had to reduce our prices significantly to meet customer requirements, and we may be required to reduce our prices in the future. This would cause our gross profit to decrease. Our financial results will suffer if we are unable to offset any reductions in our average selling prices by increasing our sales volumes, reducing our costs or developing new or enhanced products on a timely basis with higher selling prices or gross profit.
Our industry is highly competitive, and our ability to compete could be negatively impacted by a variety of factors.
The semiconductor industry is highly competitive and includes hundreds of companies, a number of which have achieved substantial market share within both our product categories and end markets. Current and prospective customers for our products and services evaluate our capabilities against the merits of our competitors. Some of our competitors are well established as independent companies and have substantially greater market share and manufacturing, financial, research and development and marketing resources than we do. We also compete with emerging companies that are attempting to sell their products in certain of our end markets and with the internal semiconductor design and manufacturing capabilities of many of our significant customers. We expect to experience continuing competitive pressures in our markets from existing competitors and new entrants.
Any consolidation among our competitors could enhance their product offerings and financial resources, further enhancing their competitive position. Our ability to compete will depend on a number of factors, including the following:
• | our ability to offer cost-effective and high quality products and services on a timely basis using our technologies; |
• | our ability to accurately identify and respond to emerging technological trends and demand for product features and performance characteristics; |
• | our ability to continue to rapidly introduce new products that are accepted by the market; |
• | our ability to adopt or adapt to emerging industry standards; |
• | the number and nature of our competitors and competitiveness of their products and services in a given market; |
• | entrance of new competitors into our markets; |
• | our ability to enter the highly competitive power management market; and |
• | our ability to supply power products to our customers reliably through our own fabrication facility. |
Many of these factors are outside of our control. In the future, our competitors may replace us as a supplier to our existing or potential customers, and our customers may satisfy more of their requirements internally. As a result, we may experience declining revenues and results of operations.
Changes in demand for consumer electronics in our end markets can impact our results of operations.
Demand for our products will depend in part on the demand for various consumer electronics products, in particular, mobile phones and multimedia devices, digital televisions, flat panel displays, mobile PCs and digital cameras, which in turn depends on general economic conditions and other factors beyond our control. If our customers fail to introduce new products that employ our products or component parts, demand for our products
23
will suffer. To the extent that we cannot offset periods of reduced demand that may occur in these markets through greater penetration of these markets or reduction in our production and costs, our sales and gross profit may decline, which would negatively impact our business, financial condition and results of operations.
If we fail to achieve design-wins for our semiconductor products, we may lose the opportunity for sales to customers for a significant period of time and be unable to recoup our investments in our products.
We expend considerable resources on winning competitive selection processes, known as design-wins, to develop semiconductor products for use in our customers’ products. These selection processes are typically lengthy and can require us to incur significant design and development expenditures. We may not win the competitive selection process and may never generate any revenue despite incurring significant design and development expenditures. Once a customer designs a semiconductor into a product, that customer is likely to continue to use the same semiconductor or enhanced versions of that semiconductor from the same supplier across a number of similar and successor products for a lengthy period of time due to the significant costs associated with qualifying a new supplier and potentially redesigning the product to incorporate a different semiconductor. If we fail to achieve initial design-wins in a customer’s qualification process, we may lose the opportunity for significant sales to that customer for a number of products and for a lengthy period of time. This may cause us to be unable to recoup our investments in our semiconductor products, which would harm our business.
We have lengthy and expensive design-to-mass production and manufacturing process development cycles that may cause us to incur significant expenses without realizing meaningful sales, the occurrence of which would harm our business.
The cycle time from the design stage to mass production for some of our products is long and requires the investment of significant resources with many potential customers without any guarantee of sales. Our design-to-mass production cycle typically begins with a three-to-twelve month semiconductor development stage and test period followed by a three-to-twelve month end-product qualification period by our customers. The fairly lengthy front end of our sales cycle creates a risk that we may incur significant expenses but may be unable to realize meaningful sales. Moreover, prior to mass production, customers may decide to cancel their products or change production specifications, resulting in sudden changes in our product specifications, increasing our production time and costs. Failure to meet such specifications may also delay the launch of our products or result in lost sales.
Research and development investments may not yield profitable and commercially viable products, and thus will not necessarily result in increases in revenues for us.
We invest significant resources in our research and development. Our research and development efforts, however, may not yield profitable or commercially viable products. During each stage of research and development, there is a substantial risk that we will have to abandon a potential product that is no longer marketable and in which we have invested significant resources. In the event we are able to develop viable new products, a significant amount of time will have elapsed between our investment in the necessary research and development effort and the receipt of any related revenues.
We face numerous challenges relating to executing our growth strategy, and if we are unable to execute our growth strategy effectively, our business and financial results could be materially and adversely affected.
Our growth strategy is to leverage our advanced analog and mixed-signal technology platform, continue to innovate and deliver new products, increase business with existing customers, broaden our customer base, aggressively grow our power business, and drive execution excellence. If we are unable to execute our growth strategy effectively, we may not be able to take advantage of market opportunities, execute our business plan or respond to competitive pressures. Moreover, if our allocation of resources does not correspond with future
24
demand for particular products, we could miss market opportunities and our business and financial results could be materially and adversely affected.
We are subject to risks associated with currency fluctuations, and changes in the exchange rates of applicable currencies could impact our results of operations.
Historically, a portion of our revenues and greater than the majority of our operating expenses and costs of sales have been denominated in non-U.S. currencies, principally the Korean won, and we expect that this will remain true in the future. Because we report our results of operations in U.S. dollars, changes in the exchange rate between the Korean won and the U.S. dollar could materially impact our reported results of operations and distort period to period comparisons. In particular, because of the difference in the amount of our consolidated revenues and expenses that are in U.S. dollars relative to Korean won, a depreciation in the U.S. dollar relative to the Korean won could result in a material increase in reported costs relative to revenues, and therefore could cause our profit margins and operating income to appear to decline materially, particularly relative to prior periods. The converse is true if the U.S. dollar were to appreciate relative to the Korean won. For example, foreign currency fluctuations had a favorable impact on our reported profit margins and operating income from operations for the fiscal year ended December 31, 2024 and 2023 due to a relatively weaker Korean won during the periods. Moreover, our foreign currency gain or loss would be affected by changes in the exchange rate between the Korean won and the U.S. dollar as a substantial portion of non-cash translation gain or loss is associated with the intercompany long-term loans to one of our Korean subsidiaries, Magnachip Semiconductor, Ltd., or MSK, which is denominated in U.S. dollars. As of December 31, 2024, the outstanding intercompany loan balance including accrued interests between MSK and our Dutch subsidiary was $257.7 million. Our Dutch subsidiary uses the U.S. dollar as their functional currency. As a result of foreign currency fluctuations, it could be more difficult to detect underlying trends in our business and results of operations. In addition, to the extent that fluctuations in currency exchange rates cause our results of operations to differ from our expectations or the expectations of our investors, the trading price of our common stock could be adversely affected.
From time to time, we may engage in exchange rate hedging activities in an effort to mitigate the impact of exchange rate fluctuations. Our Korean subsidiary, Magnachip Semiconductor Ltd., enters into foreign currency zero cost collar contracts in order to mitigate a portion of the impact of U.S. dollar-Korean won exchange rate fluctuations on our operating results. These foreign currency zero cost collar contracts typically require us to sell specified notional amounts in U.S. dollars and provide us the option to sell specified notional amounts in U.S. dollars during successive months to our counterparty in exchange for Korean won at specified exchange rates. Obligations under these foreign currency zero cost collar contracts must be cash collateralized if our exposure exceeds certain specified thresholds. These zero cost collar contracts may be terminated by the counterparty in a number of circumstances, including if our total cash and cash equivalents is less than $30 million at the end of a fiscal quarter. We cannot assure that any hedging technique we implement will be effective. If our hedging activities are not effective, changes in currency exchange rates may have a more significant impact on our results of operations. See “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations—Factors Affecting our Results of Operations” for further details.
The loss of our key employees would materially adversely affect our business, and we may not be able to attract or retain the technical or management employees necessary to compete in our industry.
Our key executives have substantial experience and have made significant contributions to our business, and our continued success is dependent upon the retention of our key management executives. The loss of such key personnel would have a material adverse effect on our business. In addition, our future success depends on our ability to attract and retain skilled technical and managerial personnel. We do not know whether we will be able to retain all of these employees as we continue to pursue our business strategy. The loss of the services of key employees, especially our key design and technical personnel, or our inability to retain, attract and motivate qualified design and technical personnel, could have a material adverse effect on our business, financial
25
condition and results of operations. This could hinder our research and product development programs or otherwise have a material adverse effect on our business.
If we encounter future labor problems, we may fail to deliver our products and services in a timely manner, which would adversely affect our revenues and profitability.
As of December 31, 2024, 453 employees, or approximately 54% of our employees, were represented by the Magnachip Semiconductor Labor Unions. We can offer no assurance that any issues with the labor union and other employees will be resolved favorably for us in the future, that we will not experience work stoppages or other labor problems in future years or that we will not incur significant expenses related to such issues.
We may incur costs to engage in future business combinations or strategic investments, and we may not realize the anticipated benefits of those transactions.
As part of our business strategy, we may seek to enter into business combinations, investments, joint ventures and other strategic alliances with other companies in order to maintain and grow revenue and market presence as well as to provide us with access to technology, products and services. Any such transaction would be accompanied by risks that may harm our business, such as difficulties in assimilating the operations, personnel and products of an acquired business or in realizing the projected benefits, disruption of our ongoing business, potential increases in our indebtedness and contingent liabilities and charges if the acquired company or assets are later determined to be worth less than the amount paid for them in an earlier original acquisition. In addition, our indebtedness may restrict us from making acquisitions that we may otherwise wish to pursue.
The failure to achieve acceptable manufacturing yields could adversely affect our business.
The manufacturing of semiconductors involves highly complex processes that require precision, a highly regulated and sterile environment and specialized equipment. Defects or other difficulties in the manufacturing process can prevent us from achieving acceptable yields in the manufacturing of our products, which could lead to higher costs, a loss of customers or delay in market acceptance of our products. Slight impurities or defects in the photomasks used to print circuits on a wafer or other factors can cause significant difficulties, particularly in connection with the production of a new product, the adoption of a new manufacturing process or any expansion of our manufacturing capacity and related transitions. We may also experience manufacturing problems in achieving acceptable yields as a result of, among other things, transferring production to other facilities, upgrading or expanding existing facilities or changing our process technologies. Yields below our target levels can negatively impact our gross profit and may cause us to eliminate underperforming products.
We rely on a number of independent subcontractors and the failure of any of these independent subcontractors to perform as required could adversely affect our operating results.
A substantial portion of our net sales are derived from semiconductor devices assembled in packages or on film. The packaging and testing of semiconductors require technical skills and specialized equipment. For the portion of packaging and testing that we outsource, we use subcontractors located in Korea and China. We rely on these subcontractors to package and test our devices with acceptable quality and yield levels, and, while we specify quality standards, we are not able to directly oversee their day-to-day operations and the packaging and testing of our devices. Onboarding of a new subcontractor, including as a result of switching from one subcontractor to another, takes approximately three to six months to verify the subcontractor’s capabilities and an additional six to twelve months to receive approval from our customers to use such subcontractor. We could be adversely affected by political disorders, labor disruptions, public health issues (including viral outbreaks such as COVID-19) and natural disasters where our subcontractors are located due to the time it would take to onboard a new subcontractor. If our semiconductor packagers and test service subcontractors experience problems in packaging and testing our semiconductor devices, experience prolonged quality or yield problems, experience shutdowns or delays associated with public health issues (such as those associated with COVID-19), or decrease the capacity of their operations available to us, our operating results could be adversely affected.
26
We cooperate with independent foundries to produce certain Mixed-Signal Solutions products, and the failure of such independent foundries to satisfy our demand could materially disrupt our business.
We use independent foundry services for certain of our Mixed-Signal Solutions products. Silicon wafer production at these facilities is allocated solely by our vendors and beyond our direct control. Therefore, any disruption in wafer supply from these vendors could have a material impact on our revenue and results of operations.
Global shortages in manufacturing capacities could interrupt or negatively affect our operations, increase cost to manufacture and negatively impact our results of operations.
Increases in demand for semiconductor products have in the past and may again in the future result in a global shortage of manufacturing capacity. As a result, we may experience increases in the costs to manufacture our products and may not be able to manufacture and deliver all of the orders placed by our customers. If we are unable to secure manufacturing capacities from our current subcontractors, our ability to deliver our products to our customers may be negatively impacted. Also, our subcontractors may increase their fees, which would result in an increase in our manufacturing costs, which we may not be fully able to pass to our customers. These factors could cause a negative impact on our results of operations.
We depend on successful parts and materials procurement for our manufacturing processes, and a shortage or increase in the price of these materials could interrupt our operations and result in a decline of revenues and results of operations.
We procure materials and electronic and mechanical components from international sources and original equipment manufacturers. We use a wide range of parts and materials in the production of our semiconductors, including silicon, processing chemicals, processing gases, precious metals and electronic and mechanical components, some of which, such as silicon wafers, are specialized raw materials that are generally only available from a limited number of suppliers. If demand increases or supply decreases for any reason, the costs of our raw materials could significantly increase. For example, worldwide supplies of silicon wafers, an important raw material for the semiconductors we manufacture, have been constrained in recent years due to an increased demand for silicon. We from time to time may enter into multi-year agreements, which specify future quantities and pricing of materials to be supplied by the vendors of these materials; however, this option may not be available to us and we cannot assure that supply increases will match demand increases. If we cannot obtain adequate materials in a timely manner or on favorable terms for the manufacture of our products, revenues and results of operations will decline.
Compliance with regulations regarding the use of “conflict minerals” could limit the supply and increase the cost of certain raw materials used in manufacturing our products.
The SEC, as mandated by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, adopted disclosure regulations for public companies that manufacture products containing certain minerals that are mined from the Democratic Republic of Congo and adjoining countries and procedures pertaining to a manufacturer’s efforts regarding the source of such minerals. These “conflict minerals” are commonly found in metals used in the manufacture of semiconductors. Manufacturers are also required to disclose their efforts to prevent the sourcing of such minerals and metals produced from them. The implementation of these requirements could adversely affect the sourcing, availability and pricing of metals used in the manufacture of our products. We may also incur additional costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals used in our products. We may also face difficulties in satisfying customers who may require that our products be certified as free of “conflict materials,” which could harm our relationships with these customers and lead to a loss of revenue.
27
We face warranty claims, product return, litigation and liability risks and the risk of negative publicity if our products fail.
Our semiconductors are incorporated into a number of end products, and our business is exposed to product return, warranty and product liability risk and the risk of negative publicity if our products fail. Although we maintain insurance for product liability claims, the amount and scope of our insurance may not be adequate to cover a product liability claim that is asserted against us. In addition, product liability insurance could become more expensive and difficult to maintain and, in the future, may not be available on commercially reasonable terms, or at all. In addition, we are exposed to the product liability risk and the risk of negative publicity affecting our customers. Our sales may decline if any of our customers are sued on a product liability claim. We also may suffer a decline in sales from the negative publicity associated with such a lawsuit or with adverse public perceptions in general regarding our customers’ products. Further, if our products are delivered with impurities or defects, we could incur additional development, repair or replacement costs, and our credibility and the market’s acceptance of our products could be harmed.
We could suffer adverse tax and other financial consequences as a result of changes in, or differences in the interpretation of, applicable tax laws, or the adoption of new U.S. or international tax legislation.
Our company’s organizational structure was created in part based on certain interpretations and conclusions regarding various tax laws, including withholding tax and other tax laws of applicable jurisdictions. Our interpretations and conclusions regarding tax laws, however, are not binding on any taxing authority and, if these interpretations and conclusions are incorrect, if our business were to be operated in a way that rendered us ineligible for tax exemptions or caused us to become subject to incremental tax, or if the authorities were to change, modify or have a different interpretation of the relevant tax laws, we could suffer adverse tax and other financial consequences, and the anticipated benefits of our organizational structure could be materially impaired. Our company’s organizational structure and other tax positions are subject to review by tax authorities in the local and other jurisdictions where we operate our business.
Our provision for income taxes is subject to volatility and could be negatively affected by earnings being (i) lower than anticipated in jurisdictions that have lower statutory tax rates or (ii) higher than anticipated in jurisdictions that have higher statutory tax rates. In addition, our provision for income taxes could be negatively affected by changes in the valuation of our deferred tax assets and liabilities, changes to global intangible low-tax income tax laws, transfer pricing adjustments, or changes in tax laws, regulations, or accounting principles.
Additional changes in the U.S. tax regime or in how U.S. multinational corporations are taxed on foreign income, including changes in how existing tax laws are interpreted or enforced, could adversely affect our business, financial condition or results of operations. For example, the Organization for Economic Cooperation and Development (OECD) has recommended changes to numerous long-standing international tax principles through its base erosion and profit shifting (BEPS) project. These changes, to the extent adopted, may increase tax uncertainty, result in higher compliance costs and adversely affect our provision for income taxes, results of operations and/or cash flow.
On August 16, 2022, the U.S. enacted the Inflation Reduction Act of 2022 (the “IRA”), which, among other things, implements a 15% alternative minimum tax on the adjusted financial statement income of large corporations with average annual financial income exceeding $1 billion, a 1% excise tax on net stock repurchases and several tax incentives to promote clean energy. The IRA provisions are effective for tax years beginning after December 31, 2022. On December 12, 2022, the European Union member states agreed to implement the OECD’s Pillar 2 global minimum effective tax rate of 15% on multinational enterprise (“MNE”) groups with consolidated revenues of at least EUR 750 million during two of the four preceding fiscal years, which will be effective for fiscal years beginning on January 1, 2024. Additionally, South Korea became one of the first countries to enact global minimum tax rules. At this time, we do not anticipate that changes in the tax laws will have a material impact to our consolidated tax provision for the year ending December 31, 2024 or December 31, 2025. We will continue to monitor as new information and guidance becomes available.
28
We are also subject to regular reviews, examinations and audits by the IRS and other taxing authorities, including the Korean National Tax Service, with respect to income and non-income based taxes both within and outside the U.S. In connection with the OECD’s BEPS project, companies are required to disclose more information to tax authorities on operations around the world, which may lead to greater audit scrutiny of income earned in various countries. Economic and political pressures to increase tax revenues in jurisdictions in which we operate, or the adoption of new or reformed tax legislation or regulation, may make resolving tax disputes more difficult and the final resolution of tax audits and any related litigation could differ from our historical provisions and accruals, resulting in an adverse impact on our business, financial condition or results of operations.
Expanded trade restrictions imposed by the United States may limit our ability to sell to certain customers.
On August 17, 2020, the U.S. Department of Commerce expanded the scope of export restrictions as applied to products directed to Huawei and its affiliates listed on the Bureau of Industry and Security’s Entity List (collectively, “Huawei”). While prior restrictions had minimal effect on our ability to supply to customers, the expanded restrictions would limit our ability to supply to a variety of customers who we believe incorporate our products to those customers’ products directly or indirectly sold to Huawei. The U.S. government has also steadily expanded export restrictions to target companies in addition to Huawei, which may have an additional impact on our ability to sell to our customers. While we were able to export some of our products after successfully obtained the necessary export licenses, we are unsure whether our other applications will be successful. Export restrictions may also affect our contractors, suppliers or customers, and we cannot assure that they will not violate the restrictions, and any such violations may result in fines or criminal sanctions against us and damage our reputation.
Additionally, the U.S. has published significant changes to U.S. export control regulations with respect to Russia and China, and we anticipate additional changes to export control regulations in the future. For example, the U.S. government has implemented controls on advanced computing ICs, computer commodities that contain such ICs, and certain semiconductor manufacturing items, as well as controls on transactions involving items for supercomputer and semiconductor manufacturing end-users. The new controls expand the scope of foreign-produced items subject to license requirements for certain entities on the U.S. government’s Entity List. Further changes in the U.S. export control regulations, including changes in the enforcement and scope of such regulations, may create delays in the introduction of our products or services in international markets or could prevent our customers with international operations from deploying our products or services globally. In some cases, such changes could prevent the export or import of our products, which could have a material impact on our future results of operations and financial condition.
Expanded trade restrictions imposed by South Korea may limit our ability to sell to certain customers or engage in any potential strategic opportunities.
Under the ITA, any export (including various means of outflow, such as sale or transfer outside Korea) of National Core Technology by the MOTIE requires the filing of a prior-report with, and the acceptance of the same by, the MOTIE. Under the Special Act, any export of NHST requires prior approval from the MOTIE. Any such export of NCT without the acceptance of the prior-report with the MOTIE may be subject to corrective orders by the relevant authorities, and failure to comply with such corrective orders may potentially result in criminal liabilities. Any such export of NHST without the prior approval from the MOTIE may be subject to corrective orders by the relevant authorities and may also be subject to criminal sanctions.
The Notification Regarding Designation of National Core Technologies issued by the MOTIE was amended on July 14, 2021 to add certain technologies to the list of National Core Technology designated by the MOTIE, and the amended list includes the OLED DDI design technology for driving display panels. On June 2, 2023, the MOTIE designated 17 technologies, including the OLED DDI design technology for driving display panels, as NHST under the Special Act. In the ordinary course of business, our Korean subsidiary, Magnachip Mixed-Signal, Ltd. (“MMS”), may provide certain information relating to its products, including OLED DDI, to customers, suppliers or vendors, and such disclosure of information may be subject to both NCT and NHST restrictions, and therefore the MOTIE’s acceptance
29
of prior reports and prior approval. Since the amendment of the foregoing NCT list in July 2021, we have filed prior-reports and applications for prior approval with the MOTIE for the export of our OLED DDI product-related information to certain overseas vendors that manufacture our products, and all such reports and applications have thus far been accepted and approved by the MOTIE.
There is no assurance, however, that any future prior-reports for the export of our product-related information will be accepted by the MOTIE or we will obtain any future prior approval for the export from the MOTIE. In the event that any future prior-report or application is not accepted or not approved, we may be unable to continue our business with the overseas customers, suppliers or vendors, including the manufacturing and delivery of our OLED DDI products.
In addition, in the event that there is any M&A transaction with respect to MMS that results in non-Korean ownership of 50% or more, or exertion of control over the appointment of officers/management by a non-Korean person or entity as the largest shareholder, a prior-report with and the acceptance by the MOTIE is required under the ITA and a prior approval from the MOTIE is required under the Special Act. There is no assurance that any report for an M&A transaction involving non-Korean acquirers or investors will be accepted by the MOTIE, nor we can assure approval for the M&A transaction from the MOTIE when such transaction is pursued in the future.
Recent changes in international trade policy and the imposition and threats of international tariffs, including tariffs applied to goods traded between the United States and other countries/regions, could materially and adversely affect our business and results of operations.
Since the beginning of 2018, there have been increasing public threats and, in some cases, legislative or executive action, from U.S. and foreign leaders regarding instituting tariffs against foreign imports of certain materials. More specifically, since March of 2018, the U.S. and China have applied tariffs to certain of each other’s exports. The institution of trade tariffs globally, and between the U.S. and China specifically, may negatively impact the affected countries’ economic conditions, which could negatively affect demand for our products in those countries and materially and adversely affect our business and results of operations of our customers serving the affected markets. The return of the Trump Administration and its recent imposition of additional tariffs on a number of countries in 2025 and threat of trade wars against foreign countries/regions have created even more uncertainties in international trade which may affect our business. For example, the imposition of tariffs could increase costs of the end-user products we supply that we may not be able to pass on to our customers, which could in turn cause a decrease in the sales of our products and materially and adversely affect our business and results of operations.
Our ability to compete successfully and achieve future growth will depend, in part, on our ability to protect our intellectual property, proprietary technology and know-how, as well as our ability to operate without infringing the proprietary rights of others.
We attempt to protect our intellectual property rights, both in the U.S. and in foreign countries, through a combination of patent, trademark, copyright, mask works and trade secret laws, as well as licensing agreements and third-party nondisclosure and assignment agreements. Because of the differences in foreign trademark, patent and other laws concerning proprietary rights, our intellectual property rights may not receive the same degree of protection in foreign countries as they would in the U.S. In particular, the validity, enforceability and scope of protection of intellectual property in China, where we derive a significant portion of our net sales, and certain other countries where we derive net sales, are uncertain and still evolving and historically have not protected, and may not protect in the future, intellectual property rights to the same extent as do the laws and enforcement procedures in the U.S. Our failure to obtain or maintain adequate protection of our intellectual property rights for any reason could have a material adverse effect on our business, results of operations and financial condition.
We seek to protect our proprietary technologies and know-how through the use of patents, trade secrets, confidentiality agreements and other security measures. The process of seeking patent protection takes a long time and is expensive. There can be no assurance that patents will issue from pending or future applications or
30
that, if patents issue, they will not be challenged, invalidated or circumvented, or that the rights granted under the patents will provide us with meaningful protection or any commercial advantage. Many of our patents are subject to cross licenses, several of which are with our competitors. Some of our technologies are not covered by any patent or patent application. The confidentiality agreements on which we rely to protect these technologies may be breached and may not be adequate to protect our proprietary technologies. Further, it is possible that others will independently develop the same or similar technologies, even without access to our proprietary technologies.
We rely on our trademarks, trade names, and brand names to distinguish our products from the products of our competitors, and have registered or applied to register many of these trademarks. We cannot assure you that our trademark applications will be approved. Third parties may also oppose our trademark applications, or otherwise challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products, which could result in loss of brand recognition, and could require us to devote resources advertising and marketing new brands. Further, we cannot assure you that competitors will not infringe our trademarks, or that we will have adequate resources to enforce our trademarks.
Our ability to compete successfully depends on our ability to operate without infringing the proprietary rights of others. We have no means of knowing what patent applications have been filed until they are published. In addition, the semiconductor industry is characterized by frequent litigation regarding patent and other intellectual property rights. We may need to file lawsuits to enforce our patents or intellectual property rights, and we may need to defend against claimed infringement of the rights of others. Any litigation could result in substantial costs to us and divert our resources, and we cannot assure you that we will prevail. Any claims of intellectual property infringement or misappropriation against use, even those without merit, could require us to:
• | pay substantial damages or indemnify customers or licensees for damages they may suffer if the products they purchase from us or the technology they license from us violate the intellectual property rights of others; |
• | stop our manufacture, use, sale or importation of the accused products; |
• | redesign, reengineer or rebrand our products, if feasible; |
• | expend significant resources to develop or acquire non-infringing technologies; |
• | discontinue processes; or |
• | obtain licenses to a third party’s intellectual property. |
There can be no assurance that we would be successful in such development or acquisition or that such licenses would be available under reasonable terms, or at all.
We license certain intellectual property from third parties. The termination of key third-party licenses relating to the use of intellectual property in our products and our design processes would adversely affect certain areas of our business.
We are subject to many environmental laws and regulations that could affect our operations or result in significant expenses.
We are subject to a variety of environmental, health and safety laws and regulations in each of the jurisdictions in which we operate, governing, among other things, air emissions, wastewater discharges, the generation, use, handling, storage and disposal of, and exposure to, hazardous substances (including asbestos) and wastes, soil and groundwater contamination and employee health and safety. These laws and regulations are complex, change frequently and have tended to become more stringent over time. Among them is the Act on Remediation and Compensation for Damages arising from Environmental Contamination which came into effect in Korea on January 1, 2016 and provides for strict liability of business entities in violation of the act and alleviates the burden of proof for the damaged party. Further, under the amendment to the Act on the Control and Aggravated Punishment of Environmental Offenses that becomes effective on November 27, 2020, certain
31
environmental offenses such as illegally emitting specified hazardous air pollutants or emitting air pollutants without necessary permits will be subject to penalties of up to 5% of the sales amount generated from the relevant business. Moreover, to effectively respond to environmental crimes, on November 14, 2022, a joint investigation team was established, consisting of experts from both national and local governments, including the prosecutor’s office, the Ministry of Environment. As a result, we have increased potential exposure to liability for environmental contaminations that might have existed in the past or would arise in the future. There can be no assurance that we have been, or will be, in compliance with all such laws and regulations or that we will not incur material costs or liabilities in connection with these laws and regulations in the future. The adoption of new environmental, health and safety laws, the failure to comply with new or existing laws, or issues relating to hazardous substances could subject us to material liability (including substantial fines or penalties), impose the need for additional capital equipment or other process requirements upon us, curtail our operations or restrict our ability to expand operations.
Our Korean subsidiaries have been designated as a regulated business under Korean environmental law, and such designation could have an adverse effect on our financial position and results of operations.
Since 2015, our Korean subsidiaries have been subject to K-ETS, a new set of greenhouse gas emissions regulations, under the Act on Allocation and Trading of Greenhouse Gas Emission Allowances. Under K-ETS, our Korean subsidiaries were allocated a certain amount of emissions allowance in accordance with the National Allocation Plan prepared by the Korean government, and are required to meet their allocated target by either reducing emissions or purchasing allowances from other participants or the government in the emission trading market. Reduction of our emissions or energy consumption may result in additional and potentially costly compliance or remediation expenses, including potentially the installation of equipment and changes in the type of materials we use in manufacturing, as well as cost of procuring emission allowances to cover the excess emissions, which could adversely affect our financial position and results of operations. During the first implementation period from 2015 to 2017 and second implementation period from 2018 to 2020, we did not exceed the allocated emission amount. Our Korean subsidiaries have been allocated emissions allowance in the third implementation period from 2021 to 2025, and we do not expect to exceed the allocated emission amount during the third implementation period. If, however, our Korean subsidiaries exceed the allocated emission amount the third implementation period, we will be required to pay for the excess emissions and may be subject to other regulatory action. We will continue to monitor our compliance with the emissions allowance on a yearly basis. In addition, from time to time, if we assess that we have excess allowances, we may sell such excess allowances to manufacturers in the emission market in Korea.
Furthermore, the Korean legislature enacted the Framework Act on Carbon Neutrality and Green Growth for Responding to Climate Change (the “Carbon Neutrality Framework Act”) on September 24, 2021. The Carbon Neutrality Framework Act aims to reduce greenhouse gas emissions by more than 35% by 2030 (compared to 2018) and proclaims the achievement of carbon neutrality by 2050 as a national vision. The Carbon Neutrality Framework Act is significant in that it legislates carbon neutrality and greenhouse gas reduction objectives, and enables the central administrative agencies, local governments and public institutions to implement various measures towards such objectives. On March 25, 2022, the Enforcement Decree of the Carbon Neutrality Framework Act (the “Enforcement Decree”) was enacted. The Enforcement Decree aims to provide details required for the execution of items prescribed under the Carbon Neutrality Framework Act. The key provisions of the Enforcement Decree include those setting the mid-to long-term greenhouse gas reduction goal at 40% and implementing the climate change impact assessment scheme. Based on that, on April 11, 2023, the Korean government published the 1st National Basic Plan for Carbon Neutrality and Green Growth (the “Basic Plan”). The Basic Plan is a national plan for responding to the climate crisis and sustainable development. Including annual reduction goals and implementation measures for each sector (e.g., industry and transportation), the Basic Plan will be updated every five years over the next 20 years between 2023 and 2042. It is anticipated that the Carbon Neutrality Framework Act and the Basic Plan, which aims to promote the harmonious development of the economy and the environment in conjunction with active greenhouse gas reduction measures, will serve as the foundation for the government’s climate change response policy going forward. Meanwhile, on August 29, 2024, the Constitutional Court of Korea (the “Constitutional Court”) held that Article 8, Paragraph 1 of the
32
Carbon Neutrality Framework Act is unconstitutional. This provision mandates the government to establish a national mid- to long-term target for reducing greenhouse gas emissions by at least 35% from 2018 levels by 2030 which is prescribed by presidential decree. The Constitutional Court ruled that this provision is indeed in violation of the Constitution because it fails to specify any emissions reduction targets beyond 2031, thereby infringing upon the petitioners’ right to clean environment. Considering that the extensive legislative authority to determine reduction targets during the period from 2031 to 2049, the Constitutional Court held that the provision would remain in effect until a legislative amendment is enacted, with a deadline set for February 28, 2026.
Our compliance with the Serious Accidents Punishment Act (the “SAPA”) could require significant expenditures and management time and expose us to liability for violations.
Enacted on January 26, 2021 and effective as of January 27, 2022 in Korea, the SAPA will impose enhanced liability exposure for workplace accidents. The legislative goal of the SAPA is to prevent serious accidents by prescribing punishments and punitive damages liability for business owners or responsible management personnel who have violated safety and health measures in the event of such serious accidents (serious industrial accidents and serious civil accidents). Since the law applies to businesses in Korea with 50 or more full-time employees starting from January 27, 2022, our Korean subsidiaries become subject to the law after the effective date. According to the SAPA, if a serious occupational accident occurs that results in at least one deceased person, at least two persons wounded for six months or more, or at least three persons suffering from occupational diseases within a one year period, if the “business owners or responsible management personnel” of the relevant business place is found to have failed to perform its “obligation to secure safety and health,” that person may be subject to imprisonment for up to 7 year or a fine of up to KRW 100 million (in case of death, imprisonment for not less than 1 year or a fine of not less than KRW 1 billion). Additionally, if there was negligence of the company in giving due attention and supervision to prevent such accident, the company will be subject to a fine up to KRW 1 billion (in case of death, a fine up to KRW 5 billion) under joint penalty provisions. Relevant responsible management personnel will also be required to spend more time, effort and cost to comply with the SAPA and perform the necessary additional duties imposed by the law to ensure compliance.
We may need additional capital in the future, and such capital may not be available on acceptable terms or at all, which would have a material adverse effect on our business, financial condition and results of operations.
We may require more capital in the future from equity or debt financings to fund operating expenses, such as research and development costs, finance investments in equipment and infrastructure, acquire complementary businesses and technologies, and respond to competitive pressures and potential strategic opportunities. If we raise additional funds through further issuances of equity or other securities convertible into equity, our existing stockholders could suffer significant dilution, and any new shares we issue could have rights, preferences or privileges senior to those of the holders of our common stock. There can be no assurance that any additional equity or debt financing would be available to us, or if available, that such financing would be on favorable terms to us. Accordingly, if we are unable to obtain additional capital or our business does not generate sufficient cash flows from operating activities to fund our working capital needs and planned capital expenditures, and our cash reserves are depleted, we may need to take various actions, such as down-sizing and/or eliminating certain operations, which could include additional exit costs, reducing or delaying capital expenditures, selling assets, or other restructuring actions. There can be no assurance that we would be successful in taking such actions and, in any event, such actions may result in a material adverse effect on our business and results of operations. In addition, our indebtedness limits our ability to incur additional indebtedness under certain circumstances.
Our business depends on international customers, suppliers and operations in Asia, and as a result we are subject to regulatory, operational, financial and political risks, which could adversely affect our financial results.
We rely on, and expect to continue to rely on, suppliers, subcontractors and operations located primarily in Asia. As a result, we face risks inherent in international operations, such as unexpected changes in regulatory
33
requirements, tariffs and other market barriers, political, social and economic instability, adverse tax consequences, war, civil disturbances and acts of terrorism, public health issues (including viral outbreaks such as COVID-19), difficulties in accounts receivable collection, extended payment terms and differing labor standards, enforcement of contractual obligations and protection of intellectual property. These risks may lead to increased costs or decreased revenue growth, or both.
Tensions with North Korea could have an adverse effect on us and the market value of our shares.
Relations between South Korea and North Korea have been tense throughout Korea’s modern history. The level of tension between the two Koreas has fluctuated and may increase abruptly as a result of current and future events. In particular, in recent years, there have been heightened security concerns stemming from North Korea’s nuclear weapon and long-range missile programs and increased uncertainty regarding North Korea’s actions and possible responses from the international community.
North Korea’s economy also faces severe challenges, and any adverse economic developments may further aggravate social and political tensions within North Korea.
Although we do not derive any revenue from, nor sell any products in, North Korea, any future increase in tensions between South Korea and North Korea that may occur, for example, if North Korea experiences a leadership crisis, high-level contacts between South Korea and North Korea break down, or military hostilities occur, could have a material adverse effect on the South Korean economy and on our business, financial condition, results of operations and the market value of our common stock.
We may be subject to disruptions, breaches or cyber-attacks of our secured networks and information technology systems that could damage our reputation, harm our business, expose us to liability and materially adversely affect our results of operations.
In the ordinary course of our business, we collect and store sensitive data, including IP and other proprietary information about our business and that of our customers, suppliers and business partners. Secure maintenance, processing and transmission of this information is critical to our operations and business strategy. We may be subject to disruptions, breaches or cyber-attacks of our secured networks and information technology systems caused by illegal hacking, criminal fraud or impersonation, computer viruses, acts of vandalism or terrorism or employee error, and our security measures or those of any third party service providers we use may not detect or prevent such security breaches. We may incur significant costs to eliminate or alleviate cybersecurity breaches and vulnerabilities, which could be significant, and our efforts to protect against such breaches or vulnerabilities may not be successful and could result in system interruptions that may materially impede our sales, manufacturing, distribution, finance or other critical functions. Any such compromise of our information security could also result in the unauthorized publication of our confidential business or proprietary information or that of other parties with which we do business, an interruption in our operations, the unauthorized transfer of cash or other assets, the unauthorized release of customer or employee data or a violation of privacy or other laws in the jurisdictions in which we operate. Any of the foregoing could irreparably damage our reputation and business and/or expose us to material monetary liability, which could have a material adverse effect on our results of operations.
You may not be able to bring an action or enforce any judgment obtained in United States courts, or bring an action in any other jurisdiction, against us or our subsidiaries or our directors, officers or independent auditors that are organized or residing in jurisdictions other than the United States.
Most of our subsidiaries are organized or incorporated outside of the U.S. and some of our directors and executive officers as well as our independent auditors are organized or reside outside of the U.S. Most of our and our subsidiaries’ assets are located outside of the U.S. and in particular, in Korea. Accordingly, any judgment obtained in the U.S. against us or our subsidiaries may not be collectible in the U.S. As a result, it may not be
34
possible for you to effect service of process within the U.S. upon these persons or to enforce against them or us court judgments obtained in the U.S. that are predicated upon the civil liability provisions of the federal securities laws of the U.S. or of the securities laws of any state of the U.S. In particular, there is doubt as to the enforceability in Korea or any other jurisdictions outside the U.S., either in original actions or in actions for enforcement of judgments of U.S. courts, of civil liabilities predicated on the federal securities laws of the U.S. or the securities laws of any state of the U.S.
We are a holding company and depend on the business of our subsidiaries to make payments to us.
We are a holding company with no independent operations of our own. Our subsidiaries conduct substantially all of the operations necessary to fund our obligations. Our ability to pay dividends or to make payments on any future obligations will depend on our subsidiaries’ cash flow and their payment of funds to us. Our subsidiaries’ ability to make payments to us will depend on:
• | their earnings; |
• | covenants contained in agreements to which we or our subsidiaries are or may become subject; |
• | business and tax considerations; and |
• | applicable law, including any restrictions under Korean law that may be imposed on our Korean subsidiary, Magnachip Semiconductor, Ltd., that would restrict its ability to make payments on intercompany loans from our Dutch subsidiary. |
We cannot assure that the operating results of our subsidiaries at any given time will be sufficient to make distributions or other payments to us.
We may at times need to incur impairment, restructuring and other restructuring related charges, which could materially affect our results of operations and financial condition.
During industry downturns and for other reasons, we may need to record impairment, restructuring or other restructuring related charges. In the future, we may need to record additional impairment charges or to further restructure our business or incur additional restructuring charges, any of which could have a material adverse effect on our results of operations or financial condition.
We are subject to litigation risks, which may be costly to defend and the outcome of which is uncertain.
All industries, including the semiconductor industry, are subject to legal claims, with and without merit, that may be particularly costly and which may divert the attention of our management and our resources in general. We are involved in a variety of legal matters, most of which we consider routine matters that arise in the normal course of business. These routine matters typically fall into broad categories such as those involving customers, employment and labor and intellectual property. Even if the final outcome of these legal claims does not have a material adverse effect on our financial position, results of operations or cash flows, defense and settlement costs can be substantial. Due to the inherent uncertainty of the litigation process, the resolution of any particular legal claim or proceeding could have a material effect on our business, financial condition, results of operations or cash flows.
The price of our common stock may be volatile and you may lose all or a part of your investment.
The trading price of our common stock might be subject to wide fluctuations. Factors, some of which are beyond our control, that could affect the trading price of our common stock may include:
• | actual or anticipated variations in our results of operations from quarter to quarter or year to year; |
• | announcements by us or our competitors of significant agreements, technological innovations or strategic alliances; |
35
• | changes in recommendations or estimates by any securities analysts who follow our securities; |
• | addition or loss of significant customers; |
• | recruitment or departure of key personnel; |
• | changes in economic performance or market valuations of competing companies in our industry; |
• | price and volume fluctuations in the overall stock market; |
• | market conditions in our industry, end markets and the economy as a whole; |
• | subsequent sales of stock and other financings; and |
• | litigation, legislation, regulation or technological developments that adversely affect our business. |
In the past, following periods of volatility in the market price of a public company’s securities, securities class action litigation often has been instituted against the public company. Regardless of its outcome, this type of litigation could result in substantial costs to us and a likely diversion of our management’s attention. You may not receive a positive return on your investment when you sell your shares, and you could lose some or the entire amount of your investment.
We cannot guarantee that our share repurchase program will be successfully consummated, or that it will enhance shareholder value, and share repurchases could affect the price of our common stock.
On July 19, 2023, the Board of Directors authorized us to repurchase up to $50 million of our outstanding common stock. Purchases have been and will be made in the open market or through privately negotiated transactions, depending upon market conditions and other factors. In connection with the repurchase program, we established a stock trading plan with Needham & Company, LLC in accordance with Rule 10b5-1 under the Securities Exchange Act. This share repurchase program could affect the price of our common stock, increase volatility and diminish our cash reserves. The IRA enacted in August 2022 imposes a 1% excise tax on the fair market value of stock repurchases made by covered corporations after December 31, 2022. The total taxable value of shares repurchased is reduced by the fair market value of any newly issued shares during the taxable year.
See “Item 8. Financial Statements and Supplementary Data—Notes to Consolidated Financial Statements—Note 12. Stock Repurchases” for more information.
Provisions in our charter documents and Delaware Law may make it difficult for a third party to acquire us and could depress the price of our common stock.
Provisions in our certificate of incorporation and bylaws may have the effect of delaying or preventing a change of control or changes in our management. Among other things, our certificate of incorporation and bylaws:
• | authorize our Board of Directors to issue, without stockholder approval, preferred stock with such terms as the Board of Directors may determine; |
• | prohibit action by written consent of our stockholders; |
• | prohibit any person other than our Board of Directors, the chairman of our Board of Directors, our Chief Executive Officer or holders of at least 25% of the voting power of all then outstanding shares of capital stock of the corporation entitled to vote generally in the election of directors to call a special meeting of our stockholders; and |
• | specify advance notice requirements for stockholder proposals and director nominations. |
In addition, we are subject to the provisions of Section 203 of the Delaware General Corporation Law (the “DGCL”), regulating corporate takeovers and which has an anti-takeover effect with respect to transactions not
36
approved in advance by our Board of Directors, including discouraging takeover attempts that might result in a premium over the market price for shares of our common stock. In general, those provisions prohibit a Delaware corporation from engaging in any business combination with any interested stockholder for a period of three years following the date that the stockholder became an interested stockholder, unless:
• | the transaction is approved by the board of directors before the date the interested stockholder attained that status; |
• | upon consummation of the transaction which resulted in the stockholder becoming an interested stockholder, the interested stockholder owned at least 85% of the voting stock of the corporation outstanding at the time the transaction commenced; or |
• | on or after such date, the business combination is approved by the board of directors and authorized at a meeting of stockholders, and not by written consent, by at least two-thirds of the outstanding voting stock that is not owned by the interested stockholder. |
In general, DGCL Section 203 defines a business combination to include the following:
• | any merger or consolidation involving the corporation and the interested stockholder; |
• | any sale, transfer, pledge or other disposition of 10% or more of the assets of the corporation involving the interested stockholder; |
• | subject to certain exceptions, any transaction that results in the issuance or transfer by the corporation of any stock of the corporation to the interested stockholder; |
• | any transaction involving the corporation that has the effect of increasing the proportionate share of the stock of any class or series of the corporation beneficially owned by the interested stockholder; or |
• | the receipt by the interested stockholder of the benefit of any loans, advances, guarantees, pledges or other financial benefits provided by or through the corporation. |
In general, DGCL Section 203 defines an interested stockholder as any entity or person beneficially owning 15% or more of the outstanding voting stock of the corporation and any entity or person affiliated with or controlling or controlled by any such entity or person.
A Delaware corporation may opt out of this provision by express provision in its original certificate of incorporation or by amendment to its certificate of incorporation or bylaws approved by its stockholders. However, we have not opted out of, and do not currently intend to opt out of, this provision.
We have not historically paid dividends and do not currently have any dividend or distribution policy, and therefore, investors may need to rely on sales of their common stock as the only way to realize any future gains on their investments.
We have not historically paid cash dividends and do not currently have any dividend or distribution policy. Any determination to pay dividends in the future will be at the discretion of our Board of Directors. Accordingly, unless the Board implements a future dividend or distribution policy, investors must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investments.
37
• | increasing our vulnerability to adverse economic and industry conditions; |
• | limiting our ability to obtain additional financing on acceptable terms or at all; |
• | requiring the dedication of a substantial portion of our cash flow from operations to service our indebtedness, which will reduce the amount of cash available for other purposes; |
• | limiting our flexibility to plan for, or react to, changes in our business; |
• | exposing us to the risk of increased interest rates, as our Term Loan borrowing is at a variable rate of interest; and |
• | placing us at a possible competitive disadvantage with competitors that are less leveraged than us or have better access to capital. |
• | Compliance with industry standards and regulatory frameworks |
• | Ongoing Evaluation and Assessment of Systems and Procedure |
vulnerabilities that could be exploited to adversely impact our business operations. To better preemptively identify risks and vulnerabilities in our security systems, we perform penetration testing for security controls using external third-party tools and encourage vulnerability reporting within our organization. |
• | Cross-Collaboration and Coordination |
• | Third-Party Service Providers |
• | Cyber Incident Response Plan |
• | Security Awareness Training for Personnel |
• | Review of Third-Party Risks |
PART II
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Market Information
Our common stock is listed on the New York Stock Exchange under the symbol “MX.”
Total Return to Stockholders (Including Reinvestment of Dividends)
Indexed Returns
Company/Index |
Base Period 12/31/2019 |
12/31/2020 | 12/31/2021 | 12/30/2022 | 12/29/2023 | 12/31/2024 | ||||||||||||||||||
Magnachip Semiconductor Corporation |
100 | 116.45 | 180.62 | 80.88 | 64.60 | 34.63 | ||||||||||||||||||
S&P 500 Index |
100 | 115.29 | 146.30 | 117.85 | 146.41 | 180.54 | ||||||||||||||||||
Philadelphia Semiconductor Index |
100 | 151.14 | 213.35 | 136.90 | 225.75 | 269.24 |
Holders
The approximate number of record holders of our outstanding common stock as of February 29, 2024 was 67. This number does not include beneficial owners for whom shares are held by nominees in street name.
Stock-Based Compensation
For information on securities authorized for issuance under our equity compensation plans, see Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.
Dividends
We have not historically paid any cash dividends on our common stock. Our Board of Directors continuously evaluates our capital allocation strategy and liquidity targets, but has not currently implemented any dividend or distribution policy. Any determination to pay dividends in the future will be at the discretion of our Board of Directors.
Issuer Purchases of Equity Securities
The following table shows the monthly activity related to our repurchases of common stock for the quarter ended December 31, 2024.
Period |
Total Number of Shares Purchased(1) |
Average Price Paid per Share |
Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs(2) |
Approximate dollar value of Shares that may yet be Purchased under the Plans or Programs (in thousands)(2) |
||||||||||||
October 2024 |
89,261 | $ | 4.54 | 89,261 | $ | 27,097 | ||||||||||
November 2024(1) |
528,775 | $ | 3.89 | 528,501 | $ | 25,041 | ||||||||||
December 2024(1) |
228,191 | $ | 3.95 | 116,165 | $ | 24,589 | ||||||||||
|
|
|
|
|
|
|
|
|||||||||
Total |
846,227 | $ | 3.98 | 733,927 | $ | 24,589 | ||||||||||
|
|
|
|
|
|
|
|
(1) | Includes 112,300 shares withheld to satisfy tax withholding obligations in connection with the vesting of restricted stock units issued under our equity incentive plans. |
41
(2) | On July 19, 2023, the Company’s Board of Directors authorized a new $50 million stock buyback program. Purchases have been and will be made in the open market or through privately negotiated transactions, depending upon market conditions and other factors. In connection with the repurchase program, the Company established a stock trading plan with Needham & Company, LLC in accordance with Rule 10b5-1 under the Exchange Act. |
Item 6. [Reserved]
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion and analysis should be read in conjunction with the audited consolidated financial statements, together in each case with the related notes, included elsewhere in this Report. This discussion and analysis contains, in addition to historical information, forward-looking statements that include risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of certain factors, including those set forth under the heading “Risk Factors” and elsewhere in this Report.
Overview
We are a designer and manufacturer of analog and mixed-signal semiconductor platform solutions for communication, Internet of Things (“IoT”), consumer, computing, industrial and automotive applications. We have a proven record with about 45 years of operating history, a portfolio of approximately 1,000 registered patents and pending applications and extensive engineering and manufacturing process expertise.
On May 30, 2023, we announced a plan to regroup the business lines in our standard products business, originally grouped as Display Solutions and Power Solutions business lines, into the following two business lines to better align our product strategies (the “Reorganization”):
(i) | Our Display integrated circuit (“IC”) and Power IC businesses, which are fabless, became the Mixed-Signal Solutions (“MSS”) business line; and |
(ii) | Our Power discrete business, which is an integrated device manufacturing (“IDM”) business, became the Power Analog Solutions (“PAS”) business line. |
On January 10, 2024, we transferred the MSS business line into a newly formed Korean limited liability company named “Magnachip Mixed-Signal, Ltd.” Following the Reorganization, our MSS business line is primarily operated by Magnachip Mixed-Signal, Ltd. (“MMS”), and our PAS business line is primarily operated by Magnachip Semiconductor, Ltd. (“MSK”), our already existing Korean operating entity. Both entities are indirect wholly owned subsidiaries of the Company.
On December 31, 2024, our Power IC business was transferred from MMS to MSK, with the transfer being completed on January 1, 2025, to consolidate the Power IC and Power discrete businesses under a single company to expand and strengthen our Power Solutions business.
However, for the purpose of this Annual Report on Form 10-K for the year ended December 31, 2024, our historical results and descriptions of our business and operations reflect the Power IC business as part of the MSS business since it was part of that business group for all of the fiscal year 2024.
During fiscal year 2024, our MSS business line consisted of Display IC and Power IC businesses. Our Display IC products provide flat panel display solutions to major suppliers of large and small flat panel displays. These products include source and gate drivers and timing controllers that cover flat panel displays used in an array of applications, applied with liquid crystal display (“LCD”), organic light emitting diodes (“OLED”) or
42
micro light emitting diode (“Micro LED”). Since 2007, we have designed and manufactured OLED display driver IC products. Our current portfolio of OLED solutions addresses various resolutions, ranging from HD (High Definition) to UHD (Ultra High Definition), for a wide range of applications, including smartphones, televisions, automotive and IT applications, such as monitors, notebook PCs and tablet PCs, as well as AR/VRs. Our Power IC products provide Power IC solutions to major television suppliers and large panel display suppliers. These products include AC-DC/DC-DC converters, LED drivers, regulators, power management integrated circuits (“PMICs”) and level shifter for a range of devices, including televisions, wearable devices, notebooks, tablet PCs and others consumer electronics, as well as automotive applications.
Our PAS business line produces power management semiconductor products, including power discrete solutions for power management in communication, consumer, computing, servers, automotive and industrial applications. These products include metal oxide semiconductor field effect transistors (“MOSFETs”) and insulated-gate bipolar transistors (“IGBTs”) for a range of devices, including televisions, smartphones, mobile phones, wearable devices, desktop PCs, notebook PCs, tablet PCs, other consumer electronics, as well as automotive and industrial applications such as power suppliers, e-bikes, solar inverters, LED lighting and motor drives.
Our wide variety of analog and mixed-signal semiconductor products combined with our mature technology platform allow us to address multiple high-growth end markets and rapidly develop and introduce new products and services in response to market demands. Our design center in Korea and substantial global manufacturing operations place us at the core of the global electronics device supply chain. We believe this enables us to quickly and efficiently respond to our customers’ needs, and allows us to better serve and capture additional demand from existing and new customers. Certain of our OLED display driver IC and Power IC products are produced using external foundries.
To maintain and increase our profitability, we must accurately forecast trends in demand for electronics devices that incorporate semiconductor products we produce. We must understand our customers’ needs as well as the likely end market trends and demand in the markets they serve. We must also invest in relevant research and development activities and purchase necessary materials on a timely basis to meet our customers’ demand while maintaining our target margins and cash flow.
The semiconductor markets in which we participate are highly competitive. The prices of our products tend to decrease regularly over their useful lives, and such price decreases can be significant as new generations of products are introduced by us or our competitors. We strive to offset the impact of declining selling prices for existing products through cost reductions and the introduction of new products that command selling prices above the average selling price of our existing products. In addition, we seek to manage our inventories and manufacturing capacity so as to mitigate the risk of losses from product obsolescence.
Demand for our products and services is driven by overall demand for communication, IoT, consumer, industrial and automotive products and can be adversely affected by periods of weak consumer and enterprise spending or by market share losses by our customers. In order to mitigate the impact of market volatility on our business, we continually strive to diversify our portfolio of products, customers, and target applications. We also expect that new competitors will emerge in these markets that may place increased pressure on the pricing for our products and services. While we believe we are well positioned competitively to compete in these markets and against these new competitors as a result of our long operating history, existing manufacturing capacity and our worldwide customer base, if we are not effective in competing in these markets, our operating results may be adversely affected.
Net sales for our standard products business are driven by design wins in which we are selected by an electronics original equipment manufacturer (“OEM”) or other potential customers to supply its demand for a particular product. A customer will often have more than one supplier designed into multi-source components for a particular product line. Once we have design wins and the products enter into mass production, we often
43
specify the pricing of a particular product for a set period of time, with periodic discussions and renegotiations of pricing with our customers. In any given period, our net sales depend heavily upon the end-market demand for the goods in which our products are used, the inventory levels maintained by our customers and, in some cases, allocation of demand for components for a particular product among selected qualified suppliers.
In contrast to completely fabless semiconductor companies, our internal manufacturing capacity provides us with greater control over certain manufacturing costs and the ability to implement process and production improvements for our internally manufactured products, which can favorably impact gross profit margins. Our internal manufacturing capacity also allows for better control over delivery schedules, improved consistency over product quality and reliability and improved ability to protect intellectual property from misappropriation on these internally manufactured products. However, having internal manufacturing capacity exposes us to the risk of under-utilization of manufacturing capacity that results in lower gross profit margins, particularly during downturns in the semiconductor industry.
Our standard products business requires investments in capital equipment. Analog and mixed-signal manufacturing facilities and processes are typically distinguished by the design and process implementation expertise rather than the use of the most advanced equipment. Many of these processes also tend to migrate more slowly to smaller geometries due to technological barriers and increased costs. For example, some of our products use high-voltage technology that requires larger geometries and that may not migrate to smaller geometries for several years, if at all. As a result, our manufacturing base and strategy do not require substantial investment in leading edge process equipment for those products, allowing us to utilize our facilities and equipment over an extended period of time with moderate required capital investments. In addition, we are less likely to experience significant industry overcapacity, which can cause product prices to decline significantly. In general, we seek to invest in manufacturing capacity that can be used for multiple high-value applications over an extended period of time. In addition, we outsource manufacturing of those products which do require advanced technology and 12-inch and 8-inch wafer capacity, such as OLED display driver IC and Power IC products. We believe this balanced capital investment strategy enables us to optimize our capital investments and facilitates more diversified product and service offerings.
Since 2007, we had designed and manufactured OLED display driver ICs in our internal manufacturing facilities. As we expanded our design capabilities to products that require lower geometries unavailable at our existing manufacturing facilities, we began outsourcing manufacturing of certain OLED display driver ICs to external 12-inch foundries starting in the second half of 2015 and we have started outsourcing 8-inch wafer for OLED TV ICs and Power ICs after the sale of our fabrication facility located in Cheongju, Korea in 2020. This additional source of manufacturing has been an important part of our supply chain management. By outsourcing manufacturing of OLED display driver IC and Power IC products to external foundries, we have been able to adapt dynamically to changing customer requirements and address growing markets without substantial capital investments by us. However, relying on external foundries exposes us to the risk of being unable to secure manufacturing capacity, particularly during the global shortage of foundry services. Although we work strategically with external foundries to ensure long-term wafer capacity, if these efforts are at any time unsuccessful, our ability to deliver products to our customers may be negatively impacted, which would adversely affect our relationship with customers and opportunities to secure new design-wins.
Our success going forward will depend upon our ability to adapt to future challenges such as the emergence of new competitors for our products and services or the consolidation of current competitors. Additionally, we must innovate to remain ahead of, or at least rapidly adapt to, technological breakthroughs that may lead to a significant change in the technology necessary to deliver our products and services. We believe that our established relationships and close collaboration with leading customers enhance our awareness of new product opportunities, market and technology trends and improve our ability to adapt and grow successfully.
44
Recent Developments
Transition to Pure-Play Power Company
On March 12, 2025, we announced that our Board of Directors and management team have made the decision to become a pure-play Power company to drive revenue growth, improve profitability, and maximize shareholder value. As a result, we are exploring all strategic options for its Display business (Display IC products), which is expected to be classified as discontinued operations when we report first fiscal quarter 2025 results of operations. Our strategic options include a sale, merger, joint venture, licensing, and wind-down. We currently intend to complete this strategic process and exit the Display business by the end of the second quarter of 2025.
As a result of this transition, future periods results of operations are expected to include only our Power IC and Power discrete business as continuing operations, which will impact future revenue by excluding the Display IC business revenue, which is to be classified as discontinued operations. In addition, our strategic actions with respect to the Display business could result in near term restructuring charges, among other things, which could material impact future period results of operations.
CAPEX Loans
On December 16, 2024, Magnachip Semiconductor, Ltd., a Korean limited liability company (“MSK”) and indirect wholly owned subsidiary of the Company, executed a Standard Credit Agreement (together with its General Terms and Conditions, the “Equipment Financing Credit Agreement”) with Korea Development Bank (“KDB”). In connection with the Equipment Financing Credit Agreement, on December 16, 2024, MSK also entered into a Kun-Pledge Agreement (the “Equipment Pledge Agreement”) with KDB with respect to the pledge by MSK in favor of KDB of certain machinery and equipment currently owned by MSK, which are located in its fabrication facility located in Gumi, Korea (“Fab 3 machinery and equipment”).
The Equipment Financing Credit Agreement provides for loans for MSK’s capital expenditures (the “CAPEX Loans”) up to an aggregate of KRW 38,000,000,000 ($26.5 million based on the KRW/USD exchange rate of 1,432.7:1 as of December 16, 2024 as quoted by KEB Hana Bank), which will be funded directly to capital expenditure supply vendors by KDB upon the submission of a request form by MSK with the necessary evidence such as purchase agreement, invoice and other documentation, as applicable.
The CAPEX Loans will bear interest at a variable rate equal to the 3-month CD rate quoted by KDB, plus 0.68%, which rate is adjusted quarterly. The initial interest rate on CAPEX Loans was 3.97% per annum. CAPEX Loans mature in 10 years from the initial loan disbursement date, with an initial 2-year (measured from the first loan disbursement date) interest-only payment period during which only interest is paid monthly, followed by 8 years of amortizing payments where the principal is repaid in equal installments every 3 months and interest is paid monthly. The Equipment Financing Credit Agreement contains customary representations of MSK in connection with the execution of the agreement and with each borrowing of CAPEX Loans and customary terms and conditions for a secured equipment financing loan of this type in Korea. All obligations of MSK under the Equipment Financing Credit Agreement and CAPEX Loans are secured by certain Fab 3 machinery and equipment pursuant to the Equipment Pledge Agreement.
Term Loan
On March 26, 2024, MSK executed a Standard Credit Agreement (together with its General Terms and Conditions, the “Loan Agreement”) with KDB. In connection with the Loan Agreement, on March 26, 2024, MSK entered into a Kun-Pledge (Mortgage) Agreement (the “Pledge Agreement”) with KDB pursuant to which MSK pledged its real property and buildings located in Gumi, Korea (“Fab 3 properties”) in favor of KDB.
The Loan Agreement provides for a working capital term loan (the “Term Loan”) of KRW 40,000,000,000 (approximately $29.8 million based on the KRW/USD exchange rate of 1,340.7:1 as of March 26, 2024 as quoted by KEB Hana Bank), which was funded in full to MSK on March 26, 2024.
45
The Term Loan bears interest at a variable rate equal to the 3-month CD rate quoted by KDB, plus 1.21%, which rate is adjusted quarterly. The initial interest rate on the Term Loan was 4.86% per annum. The Term Loan requires monthly interest-only payments and matures on March 26, 2027, at which time the full principal balance will be due and payable. All obligations of MSK under the Loan Agreement and the Term Loan are secured by the Fab 3 properties pursuant to the Pledge Agreement.
New Stock Repurchase Program
On July 19, 2023, our Board of Directors authorized a new $50 million stock buyback program. Purchases have been and will be made in the open market or in privately negotiated transactions, depending upon market conditions and other factors.
From August 2023 to December 2023, we repurchased 1,730,173 shares of our common stock in the open market for an aggregate purchase price of $13.6 million and a weighted average price per share of $7.84 under the new stock repurchase program.
From January 2024 to December 2024, we repurchased 2,349,811 shares of our common stock in the open market for an aggregate purchase price of $11.8 million and a weighted average price per share of $5.04 under the new stock repurchase program.
From January 2025 to February 2025, we repurchased 31,254 shares of our common stock in the open market for an aggregate purchase price of $0.1 million and a weighted average price per share of $3.95 under the new stock repurchase program.
Macroeconomic Industry Conditions
The semiconductor industry continues to face a number of macroeconomic challenges, including rising inflation, increased interest rates, supply chain disruptions, inventory corrections, shifting customer and end-user demand, fluctuations in currency rates, and geopolitical tensions, including without limitation ongoing conflicts involving Russia and Ukraine, sustained military action and conflicts in the Middle East, and potential trade conflicts, including arising directly or indirectly from tariffs recently imposed by the United States, any one or more of which may cause volatility and unpredictability in the supply chain or market for semiconductor products and end-user demand. The length and severity of these macroeconomic events and their overall impact on our business, results of operations and financial condition remain uncertain.
Developments in Export Control Regulations
On October 7, 2022, the Bureau of Industry and Security (BIS) of the U.S. Department of Commerce published changes to U.S. export control regulations (U.S. Export Regulations), including new restrictions on Chinese entities’ ability to obtain advanced computing chips, develop and maintain supercomputers, and manufacture advanced semiconductors. Further, on October 12, 2022, a new rule went into effect requiring U.S. persons to obtain a license prior to engaging in certain activities that could “support” certain end-uses and end-users, including those related to weapons of mass destruction. Additionally, on October 21, 2022, BIS brought into effect a series of new Foreign Direct Product (FDP) rules and various new controls on advanced computing items, significantly expanding the scope of items that are subject to export control under the U.S. Export Regulations. More recently, on October 25, 2023, BIS published additional rules, which went into effect on November 17, 2023 to expand, clarify, and correct the rules published in October 2022. A further corrected and clarified version of these rules went into effect on April 4, 2024. On January 16, 2025, BIS published amendments and clarifications of the U.S. Export Regulations which further tightened controls of advanced computing items. Based on our understanding of the U.S. Export Regulations and related rules currently in effect, we do not anticipate that they will have a material impact on our current business, but we will continue reviewing and assessing these rules and regulations and their potential impact on our business. Additional changes to the U.S. Export Regulations are expected, such as recently proposed rule changes that may expand restrictions on
46
export transactions involving end users or end uses with military connections; but the scope or timing of such changes is uncertain. We will continue to monitor such developments, including potential additional trade restrictions, and other regulatory or policy changes by the U.S. and foreign governments.
Explanation and Reconciliation of Non-U.S. GAAP Measures
Adjusted EBITDA, Adjusted Operating Income (Loss) and Adjusted Net Income (Loss)
We use the terms Adjusted EBITDA, Adjusted Operating Income (Loss) and Adjusted Net Income (Loss) (including on a per share basis) in this Report. Adjusted EBITDA, as we define it, is a non-U.S. GAAP measure. We define Adjusted EBITDA for the periods indicated as EBITDA (as defined below), adjusted to exclude (i) equity-based compensation expense, (ii) foreign currency loss (gain), net, (iii) derivative valuation loss (gain), net, (iv) impairment and other charges and (v) early termination charges. EBITDA for the periods indicated is defined as net loss before interest income, interest expense, income tax benefit, net and depreciation and amortization.
See the footnotes to the table below for further information regarding these items. We present Adjusted EBITDA as a supplemental measure of our performance because:
• | we believe that Adjusted EBITDA, by eliminating the impact of a number of items that we do not consider to be indicative of our core ongoing operating performance, provides a more comparable measure of our operating performance from period-to-period and may be a better indicator of future performance; |
• | we believe that Adjusted EBITDA is commonly requested and used by securities analysts, investors and other interested parties in the evaluation of a company as an enterprise level performance measure that eliminates the effects of financing, income taxes and the accounting effects of capital spending, as well as other one time or recurring items described above; and |
• | we believe that Adjusted EBITDA is useful for investors, among other reasons, to assess a company’s period-to-period core operating performance and to understand and assess the manner in which management analyzes operating performance. |
We use Adjusted EBITDA in a number of ways, including:
• | for planning purposes, including the preparation of our annual operating budget; |
• | to evaluate the effectiveness of our enterprise level business strategies; |
• | in communications with our Board of Directors concerning our consolidated financial performance; and |
• | in certain of our compensation plans as a performance measure for determining incentive compensation payments. |
We encourage you to evaluate each adjustment and the reasons we consider them appropriate. In evaluating Adjusted EBITDA, you should be aware that in the future we may incur expenses (income) similar to the adjustments in this presentation. Adjusted EBITDA is not a measure defined in accordance with U.S. GAAP and should not be construed as an alternative to net income (loss) or any other performance measure derived in accordance with U.S. GAAP, or as an alternative to cash flows from operating activities as a measure of liquidity. A reconciliation of net loss to Adjusted EBITDA is as follows:
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||
(Dollars in millions) | ||||||||
Net loss |
$ | (54.3 | ) | $ | (36.6 | ) | ||
Interest income |
(8.8 | ) | (10.4 | ) | ||||
Interest expense |
2.0 | 0.8 | ||||||
Income tax benefit, net |
(8.3 | ) | (10.9 | ) | ||||
Depreciation and amortization |
16.2 | 16.7 | ||||||
|
|
|
|
|||||
EBITDA |
$ | (53.3 | ) | $ | (40.5 | ) |
47
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||
(Dollars in millions) | ||||||||
Adjustments: |
||||||||
Equity-based compensation expense(a) |
$ | 6.2 | $ | 7.2 | ||||
Foreign currency loss (gain), net(b) |
16.9 | (0.5 | ) | |||||
Derivative valuation loss (gain), net(c) |
(0.1 | ) | 0.3 | |||||
Impairment and other charges(d) |
6.7 | 0.8 | ||||||
Early termination charges(e) |
— | 8.4 | ||||||
|
|
|
|
|||||
Adjusted EBITDA |
$ | (23.6 | ) | $ | (24.2 | ) | ||
|
|
|
|
(a) | This adjustment eliminates the impact of non-cash equity-based compensation expenses. Although we expect to incur non-cash equity-based compensation expenses in the future, these expenses do not generally require cash settlement, and, therefore, are not used by us to assess the profitability of our operations. We believe that analysts and investors will find it helpful to review our operating performance without the effects of these non-cash expenses as supplemental information. |
(b) | This adjustment mainly eliminates the impact of non-cash foreign currency translation associated with intercompany debt obligations and foreign currency denominated receivables and payables, as well as the cash impact of foreign currency transaction gains or losses on collection of such receivables and payment of such payables. Although we expect to incur foreign currency translation gains or losses in the future, we believe that analysts and investors will find it helpful to review our operating performance without the effects of these primarily non-cash gains or losses, which we cannot control. Additionally, we believe the isolation of this adjustment provides investors with enhanced comparability to prior and future periods of our operating performance results. |
(c) | This adjustment eliminates the impact of gain or loss recognized in income on derivatives, which represents derivatives value changes excluded from the risk being hedged. We enter into derivative transactions to mitigate foreign exchange risks. As our derivative transactions are limited to a certain portion of our expected cash flows denominated in U.S. dollars, and we do not enter into derivative transactions for trading or speculative purposes, we do not believe that these charges or gains are indicative of our core operating performance. |
(d) | For the year ended December 31, 2024, this adjustment eliminates $4.6 million of impairment loss primarily related to the tangible assets associated with our Display business, and $2.0 million of one-time cumulative financial impact in connection with certain employee benefits. For the year ended December 31, 2023, this adjustment eliminates $0.8 million of one-time employee incentives. As these adjustments meaningfully impacted our operating results and are not expected to represent an ongoing operating expense or income to us, we believe our operating performance results are more usefully compared if these adjustments are excluded. |
(e) | For the year ended December 31, 2023, this adjustment eliminates the termination related charges of $8.4 million in connection with the voluntary resignation program (the “Program”) that we offered and paid to certain employees during the first half of 2023. As this adjustment meaningfully impacted our operating results and are not expected to represent an ongoing operating expense or income to us, we believe our operating performance results are more usefully compared if these adjustments are excluded. |
Adjusted EBITDA has limitations as an analytical tool, and you should not consider it in isolation, or as a substitute for analysis of our results as reported under U.S. GAAP. Some of these limitations are:
• | Adjusted EBITDA does not reflect our cash expenditures, or future requirements, for capital expenditures or contractual commitments; |
• | Adjusted EBITDA does not reflect changes in, or cash requirements for, our working capital needs; |
• | Adjusted EBITDA does not reflect the interest expense, or the cash requirements necessary to service interest or principal payments, on our debt; |
48
• | although depreciation and amortization are non-cash charges, the assets being depreciated and amortized will often need to be replaced in the future, and Adjusted EBITDA does not reflect any cash requirements for such replacements; |
• | Adjusted EBITDA does not consider the potentially dilutive impact of issuing equity-based compensation to our management team and employees; |
• | Adjusted EBITDA does not reflect the costs of holding certain assets and liabilities in foreign currencies; and |
• | other companies in our industry may calculate Adjusted EBITDA differently than we do, limiting its usefulness as a comparative measure. |
Because of these limitations, Adjusted EBITDA should not be considered as a measure of discretionary cash available to us to invest in the growth of our business. We compensate for these limitations by relying primarily on our U.S. GAAP results and using Adjusted EBITDA only supplementally.
We present Adjusted Operating Income (Loss) as supplemental measures of our performance. We prepare Adjusted Operating Income (Loss) by adjusting operating income (loss) to eliminate the impact of equity-based compensation expenses and other items that may be either one time or recurring that we do not consider to be indicative of our core ongoing operating performance. We believe that Adjusted Operating Income (Loss) is useful to investors to provide a supplemental way to understand our underlying operating performance and allows investors to monitor and understand changes in our ability to generate income (loss) from ongoing business operations.
Adjusted Operating Income (Loss) is not a measure defined in accordance with U.S. GAAP and should not be construed as an alternative to operating income (loss) or any other performance measure derived in accordance with U.S. GAAP. We encourage you to evaluate each adjustment and the reasons we consider them appropriate. Other companies in our industry may calculate Adjusted Operating Income (Loss) differently than we do, limiting its usefulness as a comparative measure. In addition, in evaluating Adjusted Operating Income (Loss), you should be aware that in the future we may incur expenses (income) similar to the adjustments in this presentation. We define Adjusted Operating Income (Loss) for the periods indicated as operating income (loss) adjusted to exclude (i) equity-based compensation expense, (ii) impairment and other charges and (iii) early termination charges.
The following table summarizes the adjustments to operating loss that we make in order to calculate Adjusted Operating Loss for the periods indicated:
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||
(Dollars in millions) | ||||||||
Operating loss |
$ | (53.0 | ) | $ | (57.6 | ) | ||
Adjustments: |
||||||||
Equity-based compensation expense(a) |
6.2 | 7.2 | ||||||
Impairment and other charges(b) |
6.7 | 0.8 | ||||||
Early termination charges(c) |
— | 8.4 | ||||||
|
|
|
|
|||||
Adjusted Operating Loss |
$ | (40.2 | ) | $ | (41.2 | ) | ||
|
|
|
|
(a) | This adjustment eliminates the impact of non-cash equity-based compensation expenses. Although we expect to incur non-cash equity-based compensation expenses in the future, these expenses do not generally require cash settlement, and, therefore, are not used by us to assess the profitability of our operations. We believe that analysts and investors will find it helpful to review our operating performance without the effects of these non-cash expenses as supplemental information. |
(b) | For the year ended December 31, 2024, this adjustment eliminates $4.6 million of impairment loss primarily related to the tangible assets associated with our Display business, and $2.0 million of one-time cumulative financial impact in connection with certain employee benefits. For the year ended December 31, 2023, this adjustment eliminates $0.8 million of one-time employee incentives. As these adjustments meaningfully |
49
impacted our operating results and are not expected to represent an ongoing operating expense or income to us, we believe our operating performance results are more usefully compared if these adjustments are excluded. |
(c) | For the year ended December 31, 2023, this adjustment eliminates the termination related charges of $8.4 million in connection with the Program that we offered and paid to certain employees during the first half of 2023. As these adjustments meaningfully impacted our operating results and are not expected to represent an ongoing operating expense or income to us, we believe our operating performance results are more usefully compared if these adjustments are excluded. |
We present Adjusted Net Income (Loss) (including on a per share basis) as a further supplemental measure of our performance. We prepare Adjusted Net Income (Loss) (including on a per share basis) by adjusting net income (loss) to eliminate the impact of a number of non-cash expenses and other items that may be either one time or recurring that we do not consider to be indicative of our core ongoing operating performance. We believe that Adjusted Net Income (Loss) (including on a per share basis) is particularly useful because it reflects the impact of our asset base and capital structure on our operating performance. We present Adjusted Net Income (Loss) (including on a per share basis) for a number of reasons, including:
• | we use Adjusted Net Income (Loss) (including on a per share basis) in communications with our Board of Directors concerning our consolidated financial performance without the impact of non-cash expenses and the other items as we discussed below since we believe that it is a more consistent measure of our core operating results from period to period; and |
• | we believe that reporting Adjusted Net Income (Loss) (including on a per share basis) is useful to readers in evaluating our core operating results because it eliminates the effects of non-cash expenses as well as the other items we discuss below, such as foreign currency gains and losses, which are out of our control and can vary significantly from period to period. |
Adjusted Net Income (Loss) (including on a per share basis) is not a measure defined in accordance with U.S. GAAP and should not be construed as an alternative to net income (loss) or any other performance measure derived in accordance with U.S. GAAP, or as an alternative to cash flows from operating activities as a measure of liquidity. We encourage you to evaluate each adjustment and the reasons we consider them appropriate. Other companies in our industry may calculate Adjusted Net Income (Loss) (including on a per share basis) differently than we do, limiting its usefulness as a comparative measure. In addition, in evaluating Adjusted Net Income (Loss) (including on a per share basis), you should be aware that in the future we may incur expenses (income) similar to the adjustments in this presentation. We define Adjusted Net Income (Loss) (including on a per share basis); for the periods indicated as net income (loss), adjusted to exclude (i) equity-based compensation expense, (ii) foreign currency loss (gain), net, (iii) derivative valuation loss (gain), net, (iv) impairment and other charges, (v) early termination charges and (vi) income tax effect on non-GAAP adjustments.
The following table summarizes the adjustments to net loss that we make in order to calculate Adjusted Net Loss (including on a per share basis) for the periods indicated:
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||
(Dollars in millions, except per share data) |
||||||||
Net loss |
$ | (54.3 | ) | $ | (36.6 | ) | ||
Adjustments: |
||||||||
Equity-based compensation expense(a) |
6.2 | 7.2 | ||||||
Foreign currency loss (gain), net(b) |
16.9 | (0.5 | ) | |||||
Derivative valuation loss (gain), net(c) |
(0.1 | ) | 0.3 | |||||
Impairment and other charges(d) |
6.7 | 0.8 | ||||||
Early termination charges(e) |
— | 8.4 | ||||||
Income tax effect on non-GAAP adjustments(f) |
(4.6 | ) | (2.2 | ) | ||||
|
|
|
|
|||||
Adjusted Net Loss |
$ | (29.2 | ) | $ | (22.5 | ) | ||
|
|
|
|
50
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||
(Dollars in millions, except per share data) |
||||||||
Reported loss per share—basic |
$ | (1.44 | ) | $ | (0.89 | ) | ||
Reported loss per share—diluted |
$ | (1.44 | ) | $ | (0.89 | ) | ||
Weighted average number of shares—basic |
37,774,280 | 41,013,069 | ||||||
Weighted average number of shares—diluted |
37,774,280 | 41,013,069 | ||||||
Adjusted loss per share—basic |
$ | (0.77 | ) | $ | (0.55 | ) | ||
Adjusted loss per share—diluted |
$ | (0.77 | ) | $ | (0.55 | ) | ||
Weighted average number of shares—basic |
37,774,280 | 41,013,069 | ||||||
Weighted average number of shares—diluted |
37,774,280 | 41,013,069 |
(a) | This adjustment eliminates the impact of non-cash equity-based compensation expenses. Although we expect to incur non-cash equity-based compensation expenses in the future, these expenses do not generally require cash settlement, and, therefore, are not used by us to assess the profitability of our operations. We believe that analysts and investors will find it helpful to review our operating performance without the effects of these non-cash expenses as supplemental information. |
(b) | This adjustment mainly eliminates the impact of non-cash foreign currency translation associated with intercompany debt obligations and foreign currency denominated receivables and payables, as well as the cash impact of foreign currency transaction gains or losses on collection of such receivables and payment of such payables. Although we expect to incur foreign currency translation gains or losses in the future, we believe that analysts and investors will find it helpful to review our operating performance without the effects of these primarily non-cash gains or losses, which we cannot control. Additionally, we believe the isolation of this adjustment provides investors with enhanced comparability to prior and future periods of our operating performance results. |
(c) | This adjustment eliminates the impact of gain or loss recognized in income on derivatives, which represents derivatives value changes excluded from the risk being hedged. We enter into derivative transactions to mitigate foreign exchange risks. As our derivative transactions are limited to a certain portion of our expected cash flows denominated in U.S. dollars, and we do not enter into derivative transactions for trading or speculative purposes, we do not believe that these charges or gains are indicative of our core operating performance. |
(d) | For the year ended December 31, 2024, this adjustment eliminates $4.6 million of impairment loss primarily related to the tangible assets associated with our Display business, and $2.0 million of one-time cumulative financial impact in connection with certain employee benefits. For the year ended December 31, 2023, this adjustment eliminates $0.8 million of one-time employee incentives. As these adjustments meaningfully impacted our operating results and are not expected to represent an ongoing operating expense or income to us, we believe our operating performance results are more usefully compared if these adjustments are excluded. |
(e) | For the year ended December 31, 2023, this adjustment eliminates the termination related charges of $8.4 million in connection with the Program that we offered and paid to certain employees during the first half of 2023. As these adjustments meaningfully impacted our operating results and are not expected to represent an ongoing operating expense or income to us, we believe our operating performance results are more usefully compared if these adjustments are excluded. |
(f) | For the years ended December 31, 2024 and 2023, income tax effect on non-GAAP adjustments were calculated by calculating the tax benefit of each jurisdiction with or without the non-GAAP adjustments. For the year ended December 31, 2024, this adjustment eliminates the income tax effect on non-GAAP adjustments of negative $4.6 million, which mainly related to one of our operating entities in Korea. For the year ended December 31, 2023, this adjustment eliminates the income tax effect on non-GAAP adjustments of negative $2.2 million, which mainly related to our then primary operating entity in Korea. |
We believe that all adjustments to income (loss) used to calculate Adjusted Net Income (Loss) was applied consistently to the periods presented.
51
Adjusted Net Income (Loss) has limitations as an analytical tool, and you should not consider it in isolation, or as a substitute for analysis of our results as reported under U.S. GAAP. Some of these limitations are:
• | Adjusted Net Income (Loss) does not reflect changes in, or cash requirements for, our working capital needs; |
• | Adjusted Net Income (Loss) does not consider the potentially dilutive impact of issuing equity-based compensation to our management team and employees; |
• | Adjusted Net Income (Loss) does not reflect the costs of holding certain assets and liabilities in foreign currencies; and |
• | Other companies in our industry may calculate Adjusted Net Income (Loss) differently than we do, limiting its usefulness as a comparative measure. |
Because of these limitations, Adjusted Net Income (Loss) should not be considered as a measure of profitability of our business. We compensate for these limitations by relying primarily on our U.S. GAAP results and using Adjusted Net Income (Loss) only as a supplement.
Factors Affecting Our Results of Operations
Net Sales. We derive substantially all of our sales (net of sales returns and allowances) from our standard products business. We outsource manufacturing of mobile OLED products to external 12-inch foundries. Our product inventory is primarily located in Korea and is available for drop shipment globally. Outside of Korea, we maintain limited product inventory, and our sales representatives generally relay orders to our fabrication facility in Korea for fulfillment. We have strategically located our sales offices near concentrations of major customers. Our sales offices are located in Korea, Japan, Taiwan and Greater China. Our network of authorized agents and distributors is in the United States, Europe and the Asia Pacific region.
We recognize revenue when a customer obtains control of the product, which is generally upon product shipment, delivery at the customer’s location or upon customer acceptance, depending on the terms of the arrangement. For the years ended December 31, 2024 and 2023, we sold products to 176 and 165 customers, respectively, and our net sales to our ten largest customers (which does not include the Transitional Fab 3 Foundry Services) represented 74% and 69% of our net sales—standard products business, respectively.
We are currently in the process of winding down the Transitional Fab 3 Foundry Services, which represented 4.6% and 14.9% of our total revenues for the years ended December 31, 2024 and 2023, respectively.
Gross Profit. Our overall gross profit generally fluctuates as a result of changes in overall sales volumes and in the average selling prices of our products and services. Other factors that influence our gross profit include changes in product mix, the introduction of new products and services and subsequent generations of existing products and services, shifts in the utilization of our manufacturing facility and the yields achieved by our manufacturing operations, changes in material, labor and other manufacturing costs including outsourced manufacturing expenses, and variation in depreciation expense.
Average Selling Prices. Average selling prices for our products tend to be highest at the time of introduction of new products which utilize the latest technology and tend to decrease over time as such products mature in the market and are replaced by next generation products. We strive to offset the impact of declining selling prices for existing products through our product development activities and by introducing new products that command selling prices above the average selling price of our existing products. In addition, we seek to manage our inventories and manufacturing capacity so as to preclude losses from product and productive capacity obsolescence.
Material Costs. Our material costs consist of costs of raw materials, such as silicon wafers, chemicals, gases and tape and packaging supplies. We use processes that require specialized raw materials, such as silicon wafers, that are generally available from a limited number of suppliers. If demand increases or supplies decrease, the costs of our raw materials could increase significantly.
52
Labor Costs. A significant portion of our employees are located in Korea. Under Korean labor laws, most employees and certain executive officers with one or more years of service are entitled to severance benefits upon the termination of their employment based on their length of service and rate of pay. As of December 31, 2024, 95% of our employees were eligible for severance benefits.
Depreciation Expense. We periodically evaluate the carrying values of long-lived assets, including property, plant and equipment and intangible assets, as well as the related depreciation periods. We depreciated our property, plant and equipment using the straight-line method over the estimated useful lives of our assets. Depreciation rates vary from 30-40 years on buildings to 3-12 years for certain equipment and assets. Our evaluation of carrying values is based on various analyses including cash flow and profitability projections. If our projections indicate that future undiscounted cash flows are not sufficient to recover the carrying value of the related long-lived assets, the carrying value of the assets is impaired and will be reduced, with the reduction charged to expense so that the carrying value is equal to fair value.
Selling Expenses. We sell our products worldwide through a direct sales force as well as a network of sales agents and representatives to OEMs, including major branded customers and contract manufacturers, and indirectly through distributors. Selling expenses consist primarily of the personnel costs for the members of our direct sales force, a network of sales representatives and other costs of distribution. Personnel costs include base salary, benefits and incentive compensation.
General and Administrative Expenses. General and administrative expenses consist of the costs of various corporate operations, including finance, legal, human resources and other administrative functions. These expenses primarily consist of payroll-related expenses, consulting and other professional fees and office facility-related expenses.
Research and Development. The rapid technological change and product obsolescence that characterize our industry require us to make continuous investments in research and development. Product development time frames vary but, in general, we incur research and development costs one to two years before generating sales from the associated new products. These expenses include personnel costs for members of our engineering workforce, cost of photomasks, silicon wafers and other non-recurring engineering charges related to product design. Additionally, we develop base line process technology through experimentation and through the design and use of characterization wafers that help achieve commercially feasible yields for new products. The majority of research and development expenses of our Display IC business are material and design-related costs for OLED display driver IC product development involving 28-nanometer or finer processes. The majority of research and development expenses of our Power IC business are material and design-related costs for Power IC products. Power IC uses standard BCD process technologies which can be sourced from multiple foundries. The majority of research and development expenses of our Power discrete business are certain equipment, material and design-related costs for Power discrete products.
Impact of Foreign Currency Exchange Rates on Reported Results of Operations. Historically, a portion of our revenues and cost of sales and greater than the majority of our operating expenses have been denominated in non-U.S. currencies, principally the Korean won, and we expect that this will remain true in the future. Because we report our results of operations in U.S. dollars converted from our non-U.S. revenues and expenses based on monthly average exchange rates, changes in the exchange rate between the Korean won and the U.S. dollar could materially impact our reported results of operations and distort period to period comparisons. In particular, because of the difference in the amount of our consolidated revenues and expenses that are in U.S. dollars relative to Korean won, depreciation in the U.S. dollar relative to the Korean won could result in a material increase in reported costs relative to revenues, and therefore could cause our profit margins and operating income to appear to decline materially, particularly relative to prior periods. The converse is true if the U.S. dollar were to appreciate relative to the Korean won. Moreover, our foreign currency gain or loss would be affected by changes in the exchange rate between the Korean won and the U.S. dollar as a substantial portion of non-cash translation gain or loss is associated with the intercompany long-term loans to one of our Korean subsidiaries,
53
Magnachip Semiconductor, Ltd. or MSK, which is denominated in U.S. dollars. As of December 31, 2024, the outstanding intercompany loan balance including accrued interest between MSK and our Dutch subsidiary was $257.7 million. As a result of such foreign currency fluctuations, it could be more difficult to detect underlying trends in our business and results of operations. In addition, to the extent that fluctuations in currency exchange rates cause our results of operations to differ from our expectations or the expectations of our investors, the trading price of our stock could be adversely affected.
From time to time, we may engage in exchange rate hedging activities in an effort to mitigate the impact of exchange rate fluctuations. Our Korean subsidiary, Magnachip Semiconductor, Ltd., enters into foreign currency zero cost collar contracts in order to mitigate a portion of the impact of U.S. dollar-Korean won exchange rate fluctuations on our operating results. Obligations under these foreign currency zero cost collar contracts must be cash collateralized if our exposure exceeds certain specified thresholds. These zero cost collar contracts may be terminated by a counterparty in a number of circumstances, including if our total cash and cash equivalents is less than $30.0 million at the end of a fiscal quarter unless a waiver is obtained from the counterparty. We cannot assure that any hedging technique we implement will be effective. If our hedging activities are not effective, changes in currency exchange rates may have a more significant impact on our results of operations. See “Note 9. Derivative Financial Instruments” to our consolidated financial statements under “Item 8. Financial Statements and Supplementary Data” for additional information regarding our foreign exchange hedging activities.
Foreign Currency Gain or Loss. Foreign currency translation gains or losses on transactions by us or our subsidiaries in a currency other than our or our subsidiaries’ functional currency are included in foreign currency gain (loss), net in our statements of operations. A substantial portion of this net foreign currency gain or loss relates to non-cash translation gain or loss related to the principal balance of intercompany balances at our Korean subsidiary, Magnachip Semiconductor, Ltd., that are denominated in U.S. dollars. This gain or loss results from fluctuations in the exchange rate between the Korean won and U.S. dollar.
Income Taxes. We record our income taxes in each of the tax jurisdictions in which we operate. This process involves using an asset and liability approach whereby deferred tax assets and liabilities are recorded for differences in the financial reporting bases and tax basis of our assets and liabilities. We exercise significant management judgment in determining our provision for income taxes, deferred tax assets and liabilities. We assess whether it is more likely than not that the deferred tax assets existing at the period-end will be realized in future periods. In such assessment, we consider all available positive and negative evidence, including scheduled reversals of deferred tax liabilities, projected future taxable income, tax planning strategies and recent results of operations. In the event we were to determine that we would be able to realize the deferred income tax assets in the future in excess of their net recorded amount, we would adjust the valuation allowance, which would reduce the provision for income taxes.
We are subject to income- or non-income-based tax examinations by tax authorities of the U.S., Korea and multiple other foreign jurisdictions for all open tax years. Significant estimates and judgments are required in determining our worldwide provision for income- or non-income based taxes. Some of these estimates are based on interpretations of existing tax laws or regulations. The ultimate amount of tax liability may be uncertain as a result.
Capital Expenditures. We primarily invest in manufacturing equipment, software design tools and other tangible assets mainly for fabrication facility maintenance, capacity expansion and technology improvement. Capacity expansions and technology improvements typically occur in anticipation of increases in demand. We typically pay for capital expenditures in partial installments with portions due on order, delivery and final acceptance. Our capital expenditures mainly include our payments for the purchase of property, plant and equipment.
54
Inventories. We monitor our inventory levels in light of product development changes and market expectations. We may be required to take additional charges for quantities in excess of demand, cost in excess of market value and product age. Our analysis may take into consideration historical usage, expected demand, anticipated sales price, new product development schedules, the effect new products might have on the sales of existing products, product age, customer design activity, customer concentration and other factors. These forecasts require us to estimate our ability to predict demand for current and future products and compare those estimates with our current inventory levels and inventory purchase commitments. Our forecasts for our inventory may differ from actual inventory use.
Results of Operations
Comparison of Years Ended December 31, 2024 and 2023
The following table sets forth consolidated results of operations for the years ended December 31, 2024 and 2023:
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||||||||||||||
Amount | % of Total revenues |
Amount | % of Total revenues |
Change Amount |
||||||||||||||||
(Dollars in millions) | ||||||||||||||||||||
Revenues |
||||||||||||||||||||
Net sales—standard products business |
$ | 221.1 | 95.4 | % | $ | 195.7 | 85.1 | % | $ | 25.5 | ||||||||||
Net sales—transitional Fab 3 foundry services |
10.6 | 4.6 | 34.4 | 14.9 | (23.8 | ) | ||||||||||||||
|
|
|
|
|
|
|||||||||||||||
Total revenues |
231.7 | 100.0 | 230.1 | 100.0 | 1.7 | |||||||||||||||
Cost of sales |
||||||||||||||||||||
Cost of sales—standard products business |
168.0 | 72.5 | 143.8 | 62.5 | 24.2 | |||||||||||||||
Cost of sales—transitional Fab 3 foundry services |
11.8 | 5.1 | 34.6 | 15.1 | (22.8 | ) | ||||||||||||||
|
|
|
|
|
|
|||||||||||||||
Total cost of sales |
179.8 | 77.6 | 178.4 | 77.6 | 1.4 | |||||||||||||||
|
|
|
|
|
|
|||||||||||||||
Gross profit |
51.9 | 22.4 | 51.6 | 22.4 | 0.3 | |||||||||||||||
Selling, general and administrative expenses |
47.1 | 20.3 | 48.5 | 21.1 | (1.4 | ) | ||||||||||||||
Research and development expenses |
51.2 | 22.1 | 51.6 | 22.4 | (0.4 | ) | ||||||||||||||
Impairment and other charges |
6.7 | 2.9 | 0.8 | 0.3 | 5.9 | |||||||||||||||
Early termination charges |
— | — | 8.4 | 3.7 | (8.4 | ) | ||||||||||||||
|
|
|
|
|
|
|||||||||||||||
Operating loss |
(53.0 | ) | (22.9 | ) | (57.6 | ) | (25.1 | ) | 4.6 | |||||||||||
Interest income |
8.8 | 3.8 | 10.4 | 4.5 | (1.7 | ) | ||||||||||||||
Interest expense |
(2.0 | ) | (0.8 | ) | (0.8 | ) | (0.4 | ) | (1.1 | ) | ||||||||||
Foreign currency gain (loss), net |
(16.9 | ) | (7.3 | ) | 0.5 | 0.2 | (17.4 | ) | ||||||||||||
Others, net |
0.5 | 0.2 | 0.0 | 0.0 | 0.5 | |||||||||||||||
|
|
|
|
|
|
|||||||||||||||
(9.6 | ) | (4.1 | ) | 10.1 | 4.4 | (19.7 | ) | |||||||||||||
|
|
|
|
|
|
|||||||||||||||
Loss before income tax benefit |
(62.6 | ) | (27.0 | ) | (47.6 | ) | (20.7 | ) | (15.1 | ) | ||||||||||
Income tax benefit, net |
(8.3 | ) | (3.6 | ) | (10.9 | ) | (4.8 | ) | 2.6 | |||||||||||
|
|
|
|
|
|
|||||||||||||||
Net loss |
$ | (54.3 | ) | (23.4 | )% | $ | (36.6 | ) | (15.9 | )% | $ | (17.7 | ) | |||||||
|
|
|
|
|
|
55
Results by business line
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||||||||||||||
Amount | % of Total revenues |
Amount | % of Total revenues |
Change Amount |
||||||||||||||||
(Dollars in millions) | ||||||||||||||||||||
Revenues |
||||||||||||||||||||
Net sales—standard products business |
||||||||||||||||||||
Mixed-Signal Solutions |
$ | 54.3 | 23.4 | % | $ | 44.4 | 19.3 | % | $ | 10.0 | ||||||||||
Power Analog Solutions |
166.8 | 72.0 | 151.3 | 65.8 | 15.5 | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Total standard products business |
221.1 | 95.4 | 195.7 | 85.1 | 25.5 | |||||||||||||||
Net sales—transitional Fab 3 foundry services |
10.6 | 4.6 | 34.4 | 14.9 | (23.8 | ) | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Total revenues |
$ | 231.7 | 100.0 | % | $ | 230.1 | 100.0 | % | $ | 1.7 | ||||||||||
|
|
|
|
|
|
|
|
|
|
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||||||||||||||
Amount | % of Net Sales |
Amount | % of Net Sales |
Change Amount |
||||||||||||||||
(Dollars in millions) | ||||||||||||||||||||
Gross Profit |
||||||||||||||||||||
Gross profit—standard products business |
||||||||||||||||||||
Mixed-Signal Solutions |
$ | 21.6 | 39.8 | % | $ | 15.0 | 33.7 | % | $ | 6.7 | ||||||||||
Power Analog Solutions |
31.5 | 18.9 | 37.0 | 24.4 | (5.5 | ) | ||||||||||||||
|
|
|
|
|
|
|||||||||||||||
Total standard products business |
53.1 | 24.0 | 51.9 | 26.5 | 1.2 | |||||||||||||||
Gross profit—transitional Fab 3 foundry services |
(1.2 | ) | (11.5 | ) | (0.3 | ) | (0.8 | ) | (0.9 | ) | ||||||||||
|
|
|
|
|
|
|||||||||||||||
Total gross profit |
$ | 51.9 | 22.4 | % | $ | 51.6 | 22.4 | % | $ | 0.3 | ||||||||||
|
|
|
|
|
|
Revenues
Total revenues were $231.7 million for the year ended December 31, 2024, a $1.7 million, or 0.7%, increase compared to $230.1 million for the year ended December 31, 2023. This increase was primarily due to an increase in revenue related to our standard products business as described below.
The standard products business. Net sales from our standard products business were $221.1 million for the year ended December 31, 2024, a $25.5 million, or 13.0%, increase compared to $195.7 million for the year ended December 31, 2023.
Net sales from our Mixed-Signal Solutions business line increased from $44.4 million for the year ended December 31, 2023 to $54.3 million for the year ended December 31, 2024. The increase in net sales from our Mixed-Signal Solutions business line was primarily attributable to a higher demand for our Power IC products, primarily for televisions and OLED IT devices, and a higher demand for automotive OLED display driver ICs. This increase was offset in part by a decrease in revenue from our mobile OLED display driver ICs stemmed from slower than expected new design-wins and lower customer demand for legacy products, and weak demand for our auto-LCD display driver ICs also had an unfavorable impact on net sales.
Net sales from our Power Analog Solutions business line increased from $151.3 million for the year ended December 31, 2023 to $166.8 million for the year ended December 31, 2024. The increase in net sales from our Power Analog Solutions business line was attributable to a higher demand for power products such as MOSFETs, including high-end MOSFETs in the communication, consumer and computing applications.
56
The transitional Fab 3 foundry services. Net sales from the transitional Fab 3 foundry services were $10.6 million and $34.4 million for the years ended December 31, 2024 and 2023, respectively.
Gross Profit
Total gross profit was $51.9 million for the year ended December 31, 2024 compared to $51.6 million for the year ended December 31, 2023, representing a $0.3 million, or 0.5%, increase. Gross profit as a percentage of total revenues was 22.4% for the year ended December 31, 2024, which remained almost flat, compared to 22.4% for the year ended December 31, 2023.
The standard products business. Gross profit from our standard products business was $53.1 million for the year ended December 31, 2024, representing a $1.2 million, or 2.3%, increase from $51.9 million for the year ended December 31, 2023. Gross profit as a percentage of net sales for the year ended December 31, 2024 decreased to 24.0% compared to 26.5% for the year ended December 31, 2023.
Gross profit from our Mixed-Signal Solutions business line was $21.6 million for the year ended December 31, 2024, which represented a $6.7 million, or 44.5%, increase from gross profit of $15.0 million for the year ended December 31, 2023. Gross profit as a percentage of net sales for the year ended December 31, 2024 increased to 39.8% compared to 33.7% for the year ended December 31, 2023. The year-over-year increase in gross profit as a percentage of net sales was primarily attributable to certain inventory reserve related to 12-inch display products in the year ended December 31, 2023 resulting from lower demand for China smartphones.
Gross profit from our Power Analog Solutions business line was $31.5 million for the year ended December 31, 2024, which represented a $5.5 million, or 14.8%, decrease from gross profit of $37.0 million for the year ended December 31, 2023. Gross profit as a percentage of net sales for the year ended December 31, 2024 decreased to 18.9% compared to 24.4% for the year ended December 31, 2023. The year-over-year decrease in gross profit as a percentage of net sales was primarily attributable to an unfavorable product mix and a lower utilization rate of our internal fabrication facility in Gumi as a result of the wind-down of transitional foundry services.
Net Sales—Standard Products Business by Geographic Region
We report net sales—standard products business by geographic region based on the location to which the products are billed. The following table sets forth our net sales—standard products business by geographic region and the percentage of total net sales—standard products business represented by each geographic region for the years ended December 31, 2024 and 2023:
Year Ended December 31, 2024 |
Year Ended December 31, 2023 |
|||||||||||||||||||
Amount | % of Net Sales – standard products business |
Amount | % of Net Sales – standard products business |
Change Amount |
||||||||||||||||
(Dollars in millions) | ||||||||||||||||||||
Korea |
$ | 86.0 | 38.9 | % | $ | 66.8 | 34.1 | % | $ | 19.2 | ||||||||||
Asia Pacific (other than Korea) |
128.0 | 57.9 | 119.2 | 60.9 | 8.7 | |||||||||||||||
United States |
2.1 | 1.0 | 2.8 | 1.4 | (0.7 | ) | ||||||||||||||
Europe |
5.1 | 2.3 | 6.8 | 3.5 | (1.7 | ) | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
$ | 221.1 | 100.0 | % | $ | 195.7 | 100.0 | % | $ | 25.5 | |||||||||||
|
|
|
|
|
|
|
|
|
|
Net sales—standard products business in Korea increased from $66.8 million for the year ended December 31, 2023 to $86.0 million for the year ended December 31, 2024, or by $19.2 million, or 28.7%,
57
primarily due to a higher demand for power products such as MOSFETs, including high-end MOSFETs, primarily for smartphones, televisions and home appliance. A higher demand for our Power IC products, primarily for televisions and OLED IT devices, also had a favorable impact on net sales.
Net sales—standard products business in the Asia Pacific increased from $119.2 million for the year ended December 31, 2023 to $128.0 million for the year ended December 31, 2024, or by $8.7 million, or 7.3%, primarily due to a higher demand for power products such as MOSFETs, including high-end MOSFETs, primarily for battery management system and e-motors, which was offset in part by a decrease in revenue from our mobile OLED display driver ICs and auto-LCD display driver ICs. A higher demand for automotive OLED display driver ICs also had a favorable impact on net sales.
Operating Expenses
Selling, General and Administrative Expenses. Selling, general and administrative expenses were $47.1 million, or 20.3% of total revenues for the year ended December 31, 2024, compared to $48.5 million, or 21.1% of total revenues for the year ended December 31, 2023. The decrease of $1.4 million, or 2.8%, was primarily attributable to a decrease in employee compensation including certain incentives and benefit related accruals, which was offset in part by an increase in professional fees mainly comprised of legal and consulting fees in connection with the establishment of new operating entity in China.
Research and Development Expenses. Research and development expenses were $51.2 million, or 22.1% of total revenues for the year ended December 31, 2024, which remained almost flat, compared to $51.6 million, or 22.4%, of total revenues for the year ended December 31, 2023.
Impairment and Other Charges. For the year ended December 31, 2024, we recorded $4.6 million of impairment loss primarily related to the tangible assets associated with our Display business. During the same period, we also recorded $2.0 million of one-time cumulative financial impact in connection with certain employee benefits. For the year ended December 31, 2023, we recorded $0.8 million of one-time employee incentives.
Early Termination Charges. For the year ended December 31, 2023, we recorded $8.4 million of termination-related charges in connection with the Program that we offered and paid to certain employees during the first half of 2023.
Operating Loss
As a result of the foregoing, operating loss of $53.0 million was recorded for the year ended December 31, 2024 compared to operating loss of $57.6 million the year ended December 31, 2023. As discussed above, the decrease in operating loss of $4.6 million resulted primarily from a $8.4 million decrease in early termination charges and a $1.4 million decrease in selling, general and administrative expenses, which was offset in part by a $5.9 million increase in impairment and other charges.
Other Income (Expense)
Interest Income. Interest income was $8.8 million and $10.4 million for the years ended December 31, 2024 and December 31, 2023, respectively.
Interest Expense. Interest expense was $2.0 million and $0.8 million for the years ended December 31, 2024 and December 31, 2023, respectively. The increase of $1.1 million, or 137.8%, was primarily due to the Term Loan that we executed in March, 2024.
58
Foreign Currency Gain (Loss), Net. Net foreign currency loss for the year ended December 31, 2024 was $16.9 million compared to net foreign currency gain of $0.5 million for the year ended December 31, 2023. The net foreign currency loss for the year ended December 31, 2024 was due to the depreciation in value of the Korean won relative to the U.S. dollar during the period.
A substantial portion of our net foreign currency gain or loss is non-cash translation gain or loss associated with the intercompany long-term loans to one of our Korean subsidiaries, which is denominated in U.S. dollars, and is affected by changes in the exchange rate between the Korean won and the U.S. dollar. As of December 31, 2024 and 2023, the outstanding intercompany loan balance including accrued interest between our Korean subsidiary, Magnachip Semiconductor, Ltd., and our Dutch subsidiary were $257.7 million and $285.1 million, respectively. Foreign currency translation gain or loss from intercompany balances were included in determining our consolidated net income since the intercompany balances were not considered long-term investments in nature because management intended to settle these intercompany balances at their respective maturity dates.
Income Tax Benefit, Net
We are subject to income taxes in the United States and many foreign jurisdictions and our effective tax rate is affected by changes in the mix of earnings between countries with differing tax rates.
We recorded $8.3 million net income tax benefit for the year ended December 31, 2024, which is primarily attributable to income tax benefit from one of our Korean subsidiaries due to its net operating loss.
We recorded $10.9 million income tax benefit for the year ended December 31, 2023, which was primarily attributable to income tax benefit of $13.0 million from our then primary operating entity in Korea, due mainly to its net operating loss, and this benefit was partially offset by income tax expense of $3.0 million from our Dutch subsidiary. The Dutch subsidiary’s income tax expense was mainly attributable to the foreign currency gains and withholding tax related to the loans granted to our Korean subsidiary by our Dutch subsidiary.
Net Loss
As a result of the foregoing, net loss of $54.3 million was recorded for the year ended December 31, 2024 compared to net loss of $36.6 million for the year ended December 31, 2023. As discussed above, the $17.7 million increase in net loss was primarily attributable to a $17.4 million increase in net foreign currency loss, a $2.6 million decrease in income tax benefit, a $1.7 million decrease in interest income and a $1.1 million increase in interest expense, which was offset in part by a $4.6 million improvement in operating loss.
Liquidity and Capital Resources
Our principal capital requirements are to fund sales and marketing, invest in research and development and capital equipment, to make debt service payments and to fund working capital needs. We calculate working capital as current assets less current liabilities.
Our principal sources of liquidity are our cash, cash equivalents, cash flows from operations and financing activities. Our ability to manage cash and cash equivalents may be limited, as our primary cash flows are dictated by the terms of our sales and supply agreements, contractual obligations, debt instruments and legal and regulatory requirements. From time to time, we may sell accounts receivable to third parties under factoring agreements or engage in accounts receivable discounting to facilitate the collection of cash. In addition, from time to time, we may make payments to our vendors on extended terms with their consent. As of December 31, 2024, we did not have any accounts payable on extended terms or payment deferment with our vendors.
As of June 29, 2018, our Korean subsidiary, Magnachip Semiconductor, Ltd. (“MSK”), entered into an arrangement whereby it (i) acquired a water treatment facility from SK hynix for $4.2 million to support our
59
fabrication facility in Gumi, Korea, and (ii) subsequently sold the water treatment facility for $4.2 million to a third party management company that we engaged to run the facility for a 10-year term beginning July 1, 2018. As of December 31, 2024, the outstanding obligation of this arrangement is approximately $13.9 million for remaining service term through 2028.
On March 26, 2024, MSK executed a Standard Credit Agreement (together with its General Terms and Conditions, the “Loan Agreement”) with Korea Development Bank (“KDB”). The Loan Agreement provides for a working capital term loan (the “Term Loan”) of KRW 40,000,000,000 (approximately $27.2 million based on the KRW/USD exchange rate of 1,470.0:1 as of December 31, 2024 as quoted by KEB Hana Bank). The Term Loan requires monthly interest-only payments and matures on March 26, 2027, at which time the full principal balance will be due and payable.
As of December 31, 2024, cash and cash equivalents held by our Korean subsidiaries were $128.6 million, which represents 93% of our total cash and cash equivalents on a consolidated basis. We currently believe that we will have sufficient cash reserves from cash on hand and expected cash from operations to fund our operations as well as capital expenditures for the next twelve months and the foreseeable future.
Year ended December 31, 2024 compared to year ended December 31, 2023
As of December 31, 2024, our cash and cash equivalents balance was $138.6 million, a $19.5 million decrease compared to $158.1 million as of December 31, 2023.
Cash outflow used in operating activities totaled $6.1 million for the year ended December 31, 2024, compared to $3.0 million of cash outflow used in operating activities for the year ended December 31, 2023. The net operating cash outflow for the year ended December 31, 2024 reflects our net loss of $54.3 million, as adjusted favorably by $61.1 million, which mainly consisted of depreciation and amortization, provision for severance benefits, provision for inventory reserves, net foreign currency loss and stock-based compensation, and net unfavorable impact of $12.9 million from changes of operating assets and liabilities.
Our working capital balance as of December 31, 2024 was $173.0 million compared to $198.5 million as of December 31, 2023. The decrease in working capital balance was mainly attributable to a $19.5 million decrease in cash and cash equivalents, primarily as a result of $11.8 million of stock repurchases under our stock repurchase program.
Cash outflow used in investing activities totaled $11.7 million for the year ended December 31, 2024, compared to a $7.7 million of cash outflow used in investing activities for the year ended December 31, 2023. The $4.0 million increase in cash outflow was primarily attributable to $4.6 million increase in purchase of property, plant and equipment and a $3.0 million net increase in hedge collateral, which was offset in part by a $3.7 million net decrease in guarantee deposits.
Cash inflow provided by financing activities totaled $16.6 million for the year ended December 31, 2024, compared to $52.3 million of cash outflow used in financing activities for the year ended December 31, 2023. The financing cash inflow for the year ended December 31, 2024 was primarily attributable to the $30.1 million of proceeds received from the new Term Loan with KDB, which was offset in part by a payment of $12.3 million for the repurchases of our common stock pursuant to our stock repurchase program and a payment of $0.6 million for the repurchase of our common stock to satisfy tax withholding obligations in connection with the vesting of restricted stock units. The financing cash outflow for the year ended December 31, 2023 was primarily attributable to a payment of $51.4 million for the repurchases of our common stock pursuant to our stock repurchase programs and a payment of $0.4 million for the repurchase of our common stock to satisfy tax withholding obligations in connection with the vesting of restricted stock units.
60
We routinely make capital expenditures for fabrication facility maintenance, enhancement of our existing facility and reinforcement of our global research and development capability. For the year ended December 31, 2024, capital expenditures for property, plant and equipment were $11.6 million, a $4.6 million, or 66.8%, increase from $7.0 million for the year ended December 31, 2023. The capital expenditures for the year ended December 31, 2024 also included expenditures related to setting up our newly established operating entity in China.
Looking ahead, we expect the capital expenditures for the year ending December 31, 2025 to be in the range of $26–28 million, which includes approximately $14-15 million for new investments into our fabrication facility in Gumi, Korea. The capital expenditures for 2025 and into 2026 will be funded through the $26.5 million Equipment Financing Credit Agreement, which is specifically designated for equipment purchases or upgrades in our Gumi fabrication. These new investments in Gumi are expected to drive development of new generation portfolio, and upgrade new tools to optimize product mix and improve gross profit margin in the near future and the longer-term.
Critical Accounting Policies and Estimates
Preparing financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities as of the date of the financial statements, the reported amounts of revenues and expenses during the reporting periods and the related disclosures in our consolidated financial statements and accompanying notes.
We believe that the accounting policies discussed below are critical due to the fact that they involve a high degree of judgment and estimates about the effects of matters that are inherently uncertain. We base these estimates and judgments on historical experience, knowledge of current conditions and other assumptions and information that we believe to be reasonable. Estimates and assumptions about future events and their effects cannot be determined with certainty. Accordingly, these estimates may change as new events occur, as more experience is acquired, as additional information is obtained and as the business environment in which we operate changes.
Inventories
Inventories are stated at the lower of cost or net realizable value, using the first in, first out method (“FIFO”). If net realizable value is less than cost at the balance sheet date, the carrying amount is reduced to the realizable value, and the difference is recognized as a loss on valuation of inventories within cost of sales. Inventory reserves are established when conditions indicate that the net realizable value is less than costs due to physical deterioration, obsolescence, changes in price levels, or other causes based on individual facts and circumstances. We evaluate the sufficiency of inventory reserves and take into consideration historical usage, expected demand, anticipated sales price, new product development schedules, the effect new products might have on the sale of existing products, product age and other factors. Reserves are also established for excess inventory based on our current inventory levels and projected demand and our ability to sell those specific products. Situations that could cause these inventory reserves include a decline in business and economic conditions, decline in consumer confidence caused by changes in market conditions, sudden and significant decline in demand for our products, inventory obsolescence because of rapidly changing technology and consumer requirements, or failure to estimate end customer demand properly. A reduction of these inventory reserves may be recorded if previously reserved items are subsequently sold as a result of unexpected changes to certain aforementioned situations.
The gross amount of inventory reserves charged to cost of sales totaled $7.0 million and $9.4 million in the fiscal years ended December 31, 2024 and 2023, respectively. The new cost base related to the sale of inventory that was previously written down totaled $7.6 million and $5.5 million in the fiscal years ended December 31, 2024 and 2023, respectively.
61
As prescribed in ASC 330, “Inventory,” once a reserve is established for a particular item based on our assessment as described above, it is maintained until the related item is sold or scrapped as a new cost basis has been established that cannot subsequently be marked up. In addition, the cost of inventories is determined based on the normal capacity of each fabrication facility. In case the capacity utilization is lower than a certain level that management believes to be normal, the fixed overhead costs per production unit which exceed those under normal capacity are charged to cost of sales rather than capitalized as inventories.
Income Taxes
We are subject to income taxes in the U.S. and foreign jurisdictions. Significant judgments and estimates are required in evaluating our uncertain tax positions and determining our provision for income taxes.
Management’s judgment is required in determining the provision for income taxes, deferred tax assets and liabilities, and valuation allowance recorded against our net deferred tax assets. We record a valuation allowance when it is determined that it is more likely than not that a deferred tax asset will not be realized. Our assessment considers the recognition of deferred tax assets on a jurisdictional basis. Accordingly, we consider all available positive and negative evidence, including projected future taxable income, tax planning strategies, and the expected timing of the reversals of existing temporary differences on a jurisdictional basis. Based on the assessment, we have recorded a full valuation allowance against one of Korean operating entity as well as Chinese, Dutch and Luxembourg entities. To the extent that we determine the deferred tax assets are realizable on a more likely than not basis and an adjustment is needed, an adjustment will be recorded in the fiscal period the determination is made.
We recognize and measure uncertain tax positions taken or expected to be taken in a tax return utilizing a two-step process. In the first step, recognition, we determine whether it is more likely than not that a tax position will be sustained upon examination, including resolution of any related appeals or litigation processes, based on the technical merits of the position. The second step addresses measurement of a tax position that meets the more likely than not criteria. The tax position is measured at the largest amount of benefit that has a likelihood of greater than 50 percent of being realized upon ultimate settlement.
Although we believe our reserves are reasonable, no assurance can be given that the final tax outcome of these matters will not be different from that which is reflected in our historical income tax provisions and accruals. We adjust these reserves in light of changing facts and circumstances, such as the closing of a tax audit or the refinement of an estimate. To the extent that the final tax outcome of these matters is different than the amounts recorded, such differences will impact the provisions for income taxes in the period in which such determination is made. The provision for income taxes includes the effect of reserve provisions and changes to reserves that are considered appropriate, as well as the related net interest and penalties.
Recent Accounting Pronouncements
See Note 1 “Business, Basis of Presentation and Summary of Significant Accounting Policies” in the Notes to the Consolidated Financial Statements in Item 8 of Part II of this Report, for a full description of recent accounting pronouncements, including the expected dates of adoption, which is incorporated herein by reference.
Item 7A. [Reserved]
62
64 | ||||
67 | ||||
68 | ||||
69 | ||||
70 | ||||
71 | ||||
72 |
/s/ |
March 14, 2025 |
December 31, |
||||||||
2024 |
2023 |
|||||||
(In thousands of U.S. dollars, except share data) |
||||||||
Assets |
||||||||
Current assets |
||||||||
Cash and cash equivalents |
$ | $ | ||||||
Accounts receivable, net |
||||||||
Inventories, net |
||||||||
Other receivables |
||||||||
Prepaid expenses |
||||||||
Hedge collateral (Note 9) |
||||||||
Other current assets (Note 1) |
||||||||
|
|
|
|
|||||
Total current assets |
||||||||
Property, plant and equipment, net |
||||||||
Operating lease right-of-use |
||||||||
Intangible assets, net |
||||||||
Long-term prepaid expenses |
||||||||
Deferred income taxes (Note 17) |
||||||||
Other non-current assets |
||||||||
|
|
|
|
|||||
Total assets |
$ | $ | ||||||
|
|
|
|
|||||
Liabilities and Stockholders’ Equity |
||||||||
Current liabilities |
||||||||
Accounts payable |
$ | $ | ||||||
Other accounts payable |
||||||||
Accrued expenses |
||||||||
Accrued income taxes |
||||||||
Operating lease liabilities |
||||||||
Other current liabilities (Note 1) |
||||||||
|
|
|
|
|||||
Total current liabilities |
||||||||
Long-term borrowing |
||||||||
Accrued severance benefits, net |
||||||||
Non-current operating lease liabilities |
||||||||
Other non-current liabilities |
||||||||
|
|
|
|
|||||
Total liabilities |
||||||||
|
|
|
|
|||||
Commitments and contingencies |
||||||||
Stockholders’ equity |
||||||||
Common stock, $ |
||||||||
Additional paid-in capital |
||||||||
Retained earnings |
||||||||
Treasury stock, |
( |
) | ( |
) | ||||
Accumulated other comprehensive loss |
( |
) | ( |
) | ||||
|
|
|
|
|||||
Total stockholders’ equity |
||||||||
|
|
|
|
|||||
Total liabilities and stockholders’ equity |
$ | $ | ||||||
|
|
|
|
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
(In thousands of U.S. dollars, except share data) |
||||||||
Revenues: |
||||||||
Net sales—standard products business |
$ | $ | ||||||
Net sales—transitional Fab 3 foundry services |
||||||||
|
|
|
|
|||||
Total revenues |
||||||||
Cost of sales: |
||||||||
Cost of sales—standard products business |
||||||||
Cost of sales—transitional Fab 3 foundry services |
||||||||
|
|
|
|
|||||
Total cost of sales |
||||||||
|
|
|
|
|||||
Gross profit |
||||||||
Operating expenses: |
||||||||
Selling, general and administrative expenses |
||||||||
Research and development expenses |
||||||||
Impairment and other charges |
||||||||
Early termination charges |
||||||||
|
|
|
|
|||||
Total operating expenses |
||||||||
|
|
|
|
|||||
Operating loss: |
( |
) | ( |
) | ||||
Interest income |
||||||||
Interest expense |
( |
) | ( |
) | ||||
Foreign currency gain (loss), net |
( |
) | ||||||
Other income, net |
||||||||
|
|
|
|
|||||
Loss before income tax benefit |
( |
) | ( |
) | ||||
Income tax benefit, net |
( |
) | ( |
) | ||||
|
|
|
|
|||||
Net loss |
$ | ( |
) | $ | ( |
) | ||
|
|
|
|
|||||
Loss per common share— |
||||||||
Basic |
$ | ( |
) | $ | ( |
) | ||
Diluted |
$ | ( |
) | $ | ( |
) | ||
Weighted average number of shares— |
||||||||
Basic |
||||||||
Diluted |
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
(In thousands of U.S. dollars) |
||||||||
Net loss |
$ | ( |
) | $ | ( |
) | ||
Other comprehensive loss: |
||||||||
Foreign currency translation adjustments |
( |
) | ( |
) | ||||
Derivative adjustments |
||||||||
Fair valuation of derivatives |
( |
) | ( |
) | ||||
Reclassification adjustment for loss on derivatives included in net loss |
||||||||
Total other comprehensive loss |
( |
) | ( |
) | ||||
Total comprehensive loss |
$ | ( |
) | $ | ( |
) | ||
Common Stock |
Additional Paid-In Capital |
Retained Earnings |
Treasury Stock |
Accumulated Other Comprehensive Loss |
Total |
|||||||||||||||||||||||
(In thousands of U.S. dollars, except share data) |
Shares |
Amount |
||||||||||||||||||||||||||
Balance at December 31, 2022 |
$ | $ | $ | $ | ( |
) | $ | ( |
) | $ | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
Stock-based compensation |
— | — | — | — | — | |||||||||||||||||||||||
Exercise of stock options |
— | — | — | |||||||||||||||||||||||||
Settlement of restricted stock units |
( |
) | — | — | — | ( |
) | |||||||||||||||||||||
Acquisition of treasury stock |
( |
) | — | — | — | ( |
) | — | ( |
) | ||||||||||||||||||
Other comprehensive loss, net |
— | — | — | — | — | ( |
) | ( |
) | |||||||||||||||||||
Net loss |
— | — | — | ( |
) | — | — | ( |
) | |||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
Balance at December 31, 2023 |
$ | $ | $ | $ | ( |
) | $ | ( |
) | $ | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
Stock-based compensation |
— | — | — | — | — | |||||||||||||||||||||||
Settlement of restricted stock units |
( |
) | — | — | — | ( |
) | |||||||||||||||||||||
Acquisition of treasury stock |
( |
) | — | — | — | ( |
) | — | ( |
) | ||||||||||||||||||
Other comprehensive loss, net |
— | — | — | — | — | ( |
) | ( |
) | |||||||||||||||||||
Net loss |
— | — | — | ( |
) | — | — | ( |
) | |||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
Balance at December 31, 2024 |
$ | $ | $ | $ | ( |
) | $ | ( |
) | $ | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
(In thousands of U.S. dollars) |
||||||||
Cash flows from operating activities |
||||||||
Net loss |
$ | ( |
) | $ | ( |
) | ||
Adjustments to reconcile net loss to net cash used in operating activities |
||||||||
Depreciation and amortization |
||||||||
Provision for severance benefits |
||||||||
Loss on foreign currency, net |
||||||||
Provision (reversal) for inventory reserves |
( |
) | ||||||
Stock-based compensation |
||||||||
Impairment charges |
||||||||
Deferred income taxes |
( |
) | ( |
) | ||||
Others, net |
||||||||
Changes in operating assets and liabilities |
||||||||
Accounts receivable, net |
||||||||
Inventories |
( |
) | ||||||
Other receivables |
( |
) | ||||||
Prepaid expenses |
||||||||
Other current assets |
||||||||
Accounts payable |
( |
) | ||||||
Other accounts payable |
( |
) | ( |
) | ||||
Accrued expenses |
( |
) | ||||||
Accrued income taxes |
( |
) | ( |
) | ||||
Deferred revenue |
( |
) | ||||||
Other current liabilities |
( |
) | ( |
) | ||||
Other non-current liabilities |
( |
) | ( |
) | ||||
Contributions to severance insurance deposit accounts |
( |
) | ( |
) | ||||
Payment of severance benefits |
( |
) | ( |
) | ||||
Others, net |
( |
) | ( |
) | ||||
Net cash used in operating activities |
( |
) | ( |
) | ||||
Cash flows from investing activities |
||||||||
Proceeds from settlement of hedge collateral |
||||||||
Payment of hedge collateral |
( |
) | ( |
) | ||||
Purchase of property, plant and equipment |
( |
) | ( |
) | ||||
Payment for intellectual property registration |
( |
) | ( |
) | ||||
Collection of guarantee deposits |
||||||||
Payment of guarantee deposits |
( |
) | ( |
) | ||||
Collection of short-term financial instruments |
||||||||
Purchase of short-term financial instruments |
( |
) | ||||||
Others, net |
( |
) | ||||||
Net cash used in investing activities |
( |
) | ( |
) | ||||
Cash flows from financing activities |
||||||||
Proceeds from long-term borrowing |
||||||||
Proceeds from exercise of stock options |
||||||||
Acquisition of treasury stock |
( |
) | ( |
) | ||||
Repayment of financing related to water treatment facility arrangement |
( |
) | ( |
) | ||||
Repayment of principal portion of finance lease liabilities |
( |
) | ( |
) | ||||
Net cash provided by (used in) financing activities |
( |
) | ||||||
Effect of exchange rates on cash and cash equivalents |
( |
) | ( |
) | ||||
Net decrease in cash and cash equivalents |
( |
) | ( |
) | ||||
Cash and cash equivalents at beginning of period |
||||||||
Cash and cash equivalents at end of period |
$ | $ | ||||||
Supplemental cash flow information |
||||||||
Cash paid for interest |
$ | $ | ||||||
Cash paid for income taxes, net |
$ | $ | ||||||
Non-cash investing and financing activities |
||||||||
Property, plant and equipment additions in other accounts payable |
$ | $ | ||||||
Acquisition of treasury stock to satisfy the tax withholding obligations in connection with equity-based compensation |
$ | $ |
Buildings |
||||
Building related structures |
||||
Machinery and equipment |
||||
Others |
Carrying Value December 31, 2024 |
Fair Value Measurement December 31, 2024 |
Quoted Prices in Active Markets for Identical Liability (Level 1) |
Significant Other Observable Inputs (Level 2) |
Significant Unobservable Inputs (Level 3) |
||||||||||||||||
Liabilities: |
||||||||||||||||||||
(other current liabilities) |
$ | $ | — | $ | — |
Carrying Value December 31, 2023 |
Fair Value Measurement December 31, 2023 |
Quoted Prices in Active Markets for Identical Asset/Liability (Level 1) |
Significant Other Observable Inputs (Level 2) |
Significant Unobservable Inputs (Level 3) |
||||||||||||||||
Assets: |
||||||||||||||||||||
(other current assets) |
$ | $ | — | $ | — | |||||||||||||||
Liabilities: |
||||||||||||||||||||
(other current liabilities) |
$ | $ | — | $ | — |
December 31, |
||||||||
2024 |
2023 |
|||||||
Accounts receivable |
$ | $ | ||||||
Notes receivable |
||||||||
Less: |
||||||||
Allowance for credit losses |
( |
) | ( |
) | ||||
Sales return reserves |
( |
) | ( |
) | ||||
Accounts receivable, net |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Beginning balance |
$ | ( |
) | $ | ( |
) | ||
Provision |
( |
) | — | |||||
Write off |
— | |||||||
Translation adjustments |
||||||||
Ending balance |
$ | ( |
) | $ | ( |
) | ||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Beginning balance |
$ | ( |
) | $ | ( |
) | ||
Provision |
( |
) | ( |
) | ||||
Usage |
— | — | ||||||
Translation adjustments |
( |
) | ||||||
Ending balance |
$ | ( |
) | $ | ( |
) |
December 31, |
||||||||
2024 |
2023 |
|||||||
Finished goods |
$ | $ | ||||||
Semi-finished goods and work-in-process |
|
|
||||||
Raw materials |
||||||||
Materials in-transit |
||||||||
Less: inventory reserve |
( |
) | ( |
) | ||||
Inventories, net |
$ |
$ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Beginning balance |
$ | ( |
) | $ | ( |
) | ||
Change in reserve |
||||||||
Inventory reserve charged to costs of sales |
( |
) | ( |
) | ||||
Sale of previously reserved inventory |
||||||||
( |
) | |||||||
Write off |
||||||||
Translation adjustments |
||||||||
Ending balance |
$ | ( |
) | $ | ( |
) | ||
December 31, |
||||||||
2024 |
2023 |
|||||||
Buildings and related structures |
$ | $ | ||||||
Machinery and equipment |
||||||||
Finance lease right-of-use |
||||||||
Others |
||||||||
Less: accumulated depreciation |
( |
) | ( |
) | ||||
Land |
||||||||
Construction in progress |
||||||||
Property, plant and equipment, net |
$ | $ | ||||||
December 31, 2024 |
||||||||||||
Gross amount |
Accumulated amortization |
Net amount |
||||||||||
Intellectual property assets |
$ | $ | ( |
) | $ | |||||||
Intangible assets |
$ | $ | ( |
) | $ | |||||||
December 31, 2023 |
||||||||||||
Gross amount |
Accumulated amortization |
Net amount |
||||||||||
Intellectual property assets |
$ | $ | ( |
) | $ | |||||||
Intangible assets |
$ | $ | ( |
) | $ | |||||||
December 31, |
||||||||||
Leases |
Classification |
2024 |
2023 |
|||||||
Assets |
||||||||||
Operating lease |
$ | $ | ||||||||
Finance lease |
Property, plant and equipment, net | |||||||||
Total lease assets |
$ | $ | ||||||||
Liabilities |
||||||||||
Current |
||||||||||
Operating |
Operating lease liabilities | $ | $ | |||||||
Finance |
||||||||||
Non-current |
||||||||||
Operating |
Non-current operating lease liabilities |
|||||||||
Finance |
||||||||||
Total lease liabilities |
$ | $ | ||||||||
December 31, |
||||||||
2024 |
2023 |
|||||||
Weighted average remaining lease term |
||||||||
Operating leases |
||||||||
Finance leases |
||||||||
Weighted average discount rate |
||||||||
Operating leases |
% | % | ||||||
Finance leases |
% | % |
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Operating lease cost |
$ | $ | ||||||
Finance lease cost |
||||||||
Amortization of right-of-use |
||||||||
Interest on lease liabilities |
||||||||
Total lease cost |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Cash paid for amounts included in the measurement of lease liabilities |
||||||||
Operating cash flows from operating leases |
$ | $ | ||||||
Operating cash flows from finance leases |
||||||||
Financing cash flows from finance leases |
Operating Leases |
Leases |
|||||||
2025 |
$ | $ | ||||||
2026 |
||||||||
2027 |
||||||||
2028 |
||||||||
2029 |
||||||||
Total future lease payments |
||||||||
Less: Imputed interest |
( |
) | ( |
) | ||||
Present value of future payments |
$ | $ | ||||||
December 31, |
||||||||
2024 |
2023 |
|||||||
Payroll, benefits and related taxes, excluding severance benefits |
$ | $ | ||||||
Withholding tax attributable to intercompany interest income |
||||||||
Outside service fees |
||||||||
Others |
||||||||
Accrued expenses |
$ | $ | ||||||
Date of transaction |
Type of derivative |
Total notional amount |
Month of settlement | |||||||
$ | ||||||||||
$ | ||||||||||
$ |
Date of transaction |
Type of derivative |
Total notional amount |
Month of settlement | |||||||
$ | ||||||||||
$ |
Derivatives designated as hedging instruments: |
December 31, |
|||||||||||
2024 |
2023 |
|||||||||||
Asset Derivatives: |
||||||||||||
Zero cost collars |
Other current assets | $ | $ | |||||||||
Liability Derivatives: |
||||||||||||
Zero cost collars |
Other current liabilities | $ | $ |
As of December 31, 2024 |
Gross amounts of recognized liabilities |
Gross amounts offset in the balance sheets |
Net amounts of liabilities presented in the balance sheets |
Gross amounts not offset in the balance sheets |
Net amount |
|||||||||||||||||||
Financial instruments |
Cash collateral pledged |
|||||||||||||||||||||||
Liability Derivatives: |
||||||||||||||||||||||||
Zero cost collars |
$ | $ | $ | $ | $ | ( |
) | $ |
As of December 31, 2023 |
Gross amounts of recognized assets/liabilities |
Gross amounts offset in the balance sheets |
Net amounts of assets/liabilities presented in the balance sheets |
Gross amounts not offset in the balance sheets |
Net amount |
|||||||||||||||||||
Financial instruments |
Cash collateral pledged |
|||||||||||||||||||||||
Asset Derivatives: |
||||||||||||||||||||||||
Zero cost collars |
$ | $ | $ | $ | $ | $ | ||||||||||||||||||
Liability Derivatives: |
||||||||||||||||||||||||
Zero cost collars |
$ | $ | $ | $ | $ | $ |
Derivatives in ASC 815 Cash Flow Hedging Relationships |
Amount of Loss Recognized in AOCI on Derivatives |
Location/Amount of Loss Reclassified from AOCI Into Statement of Operations |
Location/Amount of Gain (Loss) Recognized in Statement of Operations on Derivatives |
|||||||||||||||||||||||||||||
2024 |
2023 |
2024 |
2023 |
2024 |
2023 |
|||||||||||||||||||||||||||
Zero cost collars |
$ | ( |
) | $ | ( |
) | Net sales | $ | ( |
) | $ | ( |
) | Other income, net | $ | $ | ( |
) |
December 31, |
||||||||
Counterparty |
2024 |
2023 |
||||||
SC |
$ | $ | ||||||
Total |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Beginning balance |
$ | $ | ||||||
Provisions |
||||||||
Severance payments |
( |
) | ( |
) | ||||
Translation adjustments |
( |
) | ( |
) | ||||
Less: Cumulative contributions to severance insurance deposit accounts |
( |
) | ( |
) | ||||
The National Pension Fund |
( |
) | ( |
) | ||||
Accrued severance benefits, net |
$ | $ | ||||||
Severance Benefit |
||||
2025 |
$ | |||
2026 |
$ | |||
2027 |
$ | |||
2028 |
$ | |||
2029 |
$ | |||
2030 – 2034 |
$ |
Number of Restricted Stock Units |
Weighted Average Grant-Date Fair Value of Restricted Stock Units |
|||||||
Outstanding at January 1, 2024 |
$ | |||||||
Granted |
||||||||
Vested |
( |
) | ||||||
Forfeited |
( |
) | ||||||
Outstanding at December 31, 2024 |
$ | |||||||
Number of Options |
Weighted Average Exercise Price of Stock Options |
Aggregate Intrinsic Value of Stock Options |
Weighted Average Remaining Contractual Life of Stock Options |
|||||||||||||
Outstanding at January 1, 2024 |
$ | $ | ||||||||||||||
Expired |
( |
) | $ | — | — | |||||||||||
Forfeited |
( |
) | $ | — | — | |||||||||||
Outstanding at December 31, 2024 |
$ | $ | — | |||||||||||||
Vested and Exercisable at December 31, 2024 |
$ | $ | — | |||||||||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Income (loss) before income tax expense (benefit) |
||||||||
Domestic |
$ | ( |
) | $ | ||||
Foreign |
( |
) | ( |
) | ||||
( |
) | ( |
) | |||||
Current income tax expense (benefit) |
||||||||
Domestic |
||||||||
Foreign |
||||||||
Uncertain tax position liability (foreign) |
( |
) | ( |
) | ||||
Deferred income tax benefit |
||||||||
Domestic |
( |
) | ( |
) | ||||
Foreign |
( |
) | ( |
) | ||||
( |
) | ( |
) | |||||
Total income tax benefit |
$ | ( |
) | $ | ( |
) | ||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Provision computed at statutory rates |
$ | ( |
) | $ | ( |
) | ||
Change in statutory tax rates |
( |
) | ||||||
Difference in foreign tax rates |
||||||||
Permanent differences |
||||||||
Derivative assets/liabilities adjustment |
( |
) | ( |
) | ||||
TPECs, hybrid and other interest |
( |
) | ||||||
Equity-based compensation |
( |
) | ( |
) | ||||
Permanent foreign currency loss |
( |
) | ( |
) | ||||
Penalty |
||||||||
Subpart F income |
— | |||||||
Intercompany debt restructuring |
— | |||||||
Disallowed tax attributes |
( |
) | — | |||||
Other permanent differences |
||||||||
Withholding tax |
( |
) | ||||||
Change in valuation allowance |
( |
) | ( |
) | ||||
Tax credits claimed |
( |
) | ( |
) | ||||
Uncertain tax positions liability |
( |
) | ( |
) | ||||
Change in net operating loss carry-forwards |
||||||||
Foreign local taxes |
||||||||
Others |
||||||||
Income tax benefit |
$ | ( |
) | $ | ( |
) | ||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Deferred tax assets |
||||||||
Inventory reserves |
$ | $ | ||||||
Accrued expenses |
||||||||
Property, plant and equipment |
||||||||
Accumulated severance benefits |
||||||||
Operating lease right-of-use |
||||||||
Foreign currency translation loss |
||||||||
NOL carry-forwards |
||||||||
Tax credit carry-forwards |
||||||||
Other long-term payable |
||||||||
Interest expense deduction limitation |
||||||||
Derivative liabilities |
||||||||
Others |
||||||||
Total deferred tax assets |
||||||||
Less: Valuation allowance |
( |
) | ( |
) | ||||
Deferred tax liabilities |
||||||||
Prepaid expense |
||||||||
Severance benefit deposits |
||||||||
Operating lease right-of-use |
||||||||
Foreign currency translation gain |
||||||||
Others |
||||||||
Total deferred tax liabilities |
||||||||
Net deferred tax assets |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Beginning balance |
$ | $ | ||||||
Reductions |
( |
) | ( |
) | ||||
Translation adjustments |
( |
) | ||||||
Ending balance |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
NOL carry-forwards |
$ | $ |
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Unrecognized tax benefits, balance at the beginning |
$ | $ | ||||||
Additions based on tax positions related to the current year |
||||||||
Lapse of statute of limitations |
( |
) | ( |
) | ||||
Translation adjustments |
( |
) | ( |
) | ||||
Unrecognized tax benefits, balance at the ending |
$ | $ | ||||||
MSS |
PAS |
Total |
||||||||||||||
Display Solutions |
$ | $ |
$ |
$ |
||||||||||||
Power Solutions |
||||||||||||||||
$ | $ | $ | $ | |||||||||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Revenues |
||||||||
Standard products business |
||||||||
Mixed-Signal Solutions |
$ | $ | ||||||
Power Analog Solutions |
||||||||
Total standard products business |
||||||||
Transitional Fab 3 foundry services |
||||||||
Total revenues |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Cost of Sales |
||||||||
Standard products business |
||||||||
Mixed-Signal Solutions |
$ | $ | ||||||
Power Analog Solutions |
||||||||
Total standard products business |
||||||||
Transitional Fab 3 foundry services |
||||||||
Total cost of sales |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Gross Profit |
||||||||
Standard products business |
||||||||
Mixed-Signal Solutions |
$ | $ | ||||||
Power Analog Solutions |
||||||||
Total standard products business |
||||||||
Transitional Fab 3 foundry services |
( |
) | ( |
) | ||||
Total gross profit |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Korea |
$ | $ | ||||||
Asia Pacific (other than Korea) |
||||||||
United States |
||||||||
Europe |
||||||||
Total |
$ | $ | ||||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Foreign currency translation adjustments |
$ | ( |
) | $ | ( |
) | ||
Derivative adjustments |
( |
) | ||||||
Total |
$ | ( |
) | $ | ( |
) | ||
Year Ended December 31, 2024 |
Foreign currency translation adjustments |
Derivative adjustments |
Total |
|||||||||
Beginning balance |
$ | ( |
) | $ | $ | ( |
) | |||||
Other comprehensive loss before reclassifications |
( |
) | ( |
) | ( |
) | ||||||
Amounts reclassified from accumulated other comprehensive loss |
||||||||||||
Net current-period other comprehensive loss |
( |
) | ( |
) | ( |
) | ||||||
Ending balance |
$ | ( |
) | $ | ( |
) | $ | ( |
) | |||
Year Ended December 31, 2023 |
Foreign currency translation adjustments |
Derivative adjustments |
Total |
|||||||||
Beginning balance |
$ | ( |
) | $ | ( |
) | $ | ( |
) | |||
Other comprehensive loss before reclassifications |
( |
) | ( |
) | ( |
) | ||||||
Amounts reclassified from accumulated other comprehensive loss |
||||||||||||
Net current-period other comprehensive income (loss) |
( |
) | ( |
) | ||||||||
Ending balance |
$ | ( |
) | $ | $ | ( |
) | |||||
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
(In thousands of U.S. dollars, except share data) |
||||||||
Basic loss per share |
||||||||
Net loss |
$ | ( |
) | $ | ( |
) | ||
Basic weighted average common stock outstanding |
||||||||
Basic loss per common share |
$ | ( |
) | $ | ( |
) | ||
Diluted loss per share |
||||||||
Net loss |
$ | ( |
) | $ | ( |
) | ||
Basic weighted average common stock outstanding |
||||||||
Net effect of dilutive equity awards |
||||||||
Diluted weighted average common stock outstanding |
||||||||
Diluted loss per common share |
$ | ( |
) | $ | ( |
) |
Year Ended December 31, |
||||||||
2024 |
2023 |
|||||||
Options |
||||||||
Restricted Stock Units |
PART IV
Item 15. Exhibits and Financial Statement Schedules
1. | Financial Statements |
The information required by this item is included in Item 8 of Part II of this Report.
2. | Financial Statement Schedules |
Financial Statement Schedules are omitted because of the absence of the conditions under which they are required or because the information required by such omitted schedules is set forth in the financial statements or the notes thereto.
3. | Exhibits |
107
108
109
110
111
Footnotes:
* | Management contract, compensatory plan or arrangement |
# | Filed herewith |
† | Furnished herewith |
^ | Portions of this exhibit (indicated by asterisks) have been omitted in accordance with Item 601(b)(10) of Regulation S-K. The registrant hereby agrees to furnish supplementally copies of any of the omitted portions of this exhibit to the SEC upon its request. |
Item 16. Form 10-K Summary
Not applicable.
112
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.
MAGNACHIP SEMICONDUCTOR CORPORATION
By: | /s/ Young-Joon Kim | |||
Name: | Young-Joon Kim | |||
Title: | Chief Executive Officer and Director | |||
Date: | March 14, 2025 |
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
Date | ||
/s/ Young-Joon Kim |
March 14, 2025 | |
Young-Joon Kim, Chief Executive Officer and Director (Principal Executive Officer) | ||
/s/ Shin Young Park |
March 14, 2025 | |
Shin Young Park, Chief Financial Officer (Principal Financial Officer and Principal Accounting Officer) | ||
/s/ Camillo Martino |
March 14, 2025 | |
Camillo Martino, Non-Executive Chairman of the Board of Directors | ||
/s/ Liz Chung |
March 14, 2025 | |
Liz Chung, Director | ||
/s/ Ilbok Lee |
March 14, 2025 | |
Ilbok Lee, Director | ||
/s/ Gilbert Nathan |
March 14, 2025 | |
Gilbert Nathan, Director |
113