10-K 1 mmsi-12312011x10k.htm 10-K MMSI-12.31.2011-10K
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C.  20549
 FORM 10-K
 (Mark One)
x
Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
for the fiscal year ended December 31, 2011,
 
 
or
 
 
o
Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.
 
MERIT MEDICAL SYSTEMS, INC.
(Exact name of registrant as specified in its charter)
Utah
 
0-18592
 
87-0447695
(State or other jurisdiction of incorporation)
 
(Commission File No.)
 
(IRS Employer Identification No.)
 
1600 West Merit Parkway
South Jordan, Utah 84095
(Address of principal executive offices, including zip code) 
Registrant’s telephone number, including area code:  (801) 253-1600
 
Securities registered pursuant to Section 12(b) of the Act:  Common Stock, No Par Value 
Securities registered pursuant to Section 12(g) of the Act:  None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o  No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o  No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x  No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x  No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer or a non-accelerated filer, or a smaller reporting company.  See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.:
Large accelerated filer x
Accelerated filer o
Non-accelerated filer o
(Do not check if a smaller reporting company)
Smaller reporting company o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o  No x
The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant, on June 30, 2011, which is the last day of the registrant’s most recently completed second fiscal quarter (based upon the closing sale price of the registrant’s common stock on the NASDAQ National Market System on June 30, 2011), was approximately $711,681,890.  Shares of common stock held by each officer and director of the registrant and by each person who may be deemed to be an affiliate have been excluded.
As of February 21, 2012, the registrant had 41,999,063 shares of common stock outstanding.
 DOCUMENTS INCORPORATED BY REFERENCE 
Portions of the following document are incorporated by reference in Part III of this Report: the registrant’s definitive proxy statement relating to the Annual Meeting of Shareholders scheduled for May 23, 2012.
 



TABLE OF CONTENTS
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Mine Safety Disclosures
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 




PART I
 
Unless otherwise indicated in this report, “Merit,” “we,” “us,” “our,” and similar terms refer to Merit Medical Systems, Inc. and our consolidated subsidiaries.
 
DISCLOSURE REGARDING FORWARD-LOOKING STATEMENTS
 
This report includes “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). All statements other than statements of historical fact are “forward-looking statements” for purposes of these provisions, including any projections of earnings, revenues or other financial items, any statements of the plans and objectives of management for future operations, any statements concerning proposed new products or services, any statements regarding future economic conditions or performance, and any statements of assumptions underlying any of the foregoing. All forward-looking statements included in this report are made as of the date hereof and are based on information available to us as of such date. We assume no obligation to update any forward-looking statement. In some cases, forward-looking statements can be identified by the use of terminology such as “may,” “will,” “expects,” “plans,” “anticipates,” “intends,” “believes,” “estimates,” “potential,” or “continue,” or the negative thereof or other comparable terminology. Although we believe that the expectations reflected in the forward-looking statements contained herein are reasonable, there can be no assurance that such expectations or any of the forward-looking statements will prove to be correct, and actual results will differ, and could differ materially, from those projected or assumed in the forward-looking statements. Our future financial condition and results of operations, as well as any forward-looking statements, are subject to inherent risks and uncertainties, including risks relating to compliance (or the failure to comply) with federal, state, local or international laws or regulations; product recalls or product liability claims; infringement of our technology or the assertion that our technology infringes the rights of other parties; recent health care reform legislation; the consequences of debt obligations, including the effect of any breach of our credit documents or other agreements; our research, development, product testing and regulatory compliance efforts, including challenges associated with our efforts to pursue new market opportunities; increasing regulation of the medical device industry in general and, as a result of our expanded operations, a larger segment of our operations; potential reforms or other changes of the regulations administered by the U.S. Food and Drug Administration (the “FDA”); limits on reimbursement imposed by governmental and other programs; laws targeting fraud and abuse in the healthcare industry; violations of the U.S. Foreign Corrupt Practices Act or anti-bribery laws; fluctuations in the price of components we use in our operations; changes in the national economy and the effect of those changes on our revenues, collections and supplier relations; termination of supplier relationships, or the failure of suppliers to perform; our failure to successfully manage growth, particularly growth resulting from acquisitions; currency exchange rate fluctuations; concentration of our revenues among a few products and procedures; development of new products and technologies that could render our products obsolete; volatility of the market price of our common stock (the “Common Stock”); weather fluctuations; changes in, or the loss of, our key personnel; work stoppage or transportation risks; current domestic and international economic conditions; failure to comply with environmental laws and regulations; and other factors referenced in our press releases and in our reports filed with the Securities and Exchange Commission (the “SEC”). All subsequent forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by these cautionary statements.  Additional factors that may have a direct bearing on our operating results are described under Item 1A. “Risk Factors” beginning on page 14.
 
Item 1. 
Business.
 
GENERAL

Merit Medical Systems, Inc. is a worldwide designer, developer, manufacturer and marketer of medical devices used in a vast array of interventional and diagnostic procedures. Our mission is to provide innovative high quality products to physicians and health care professionals to enhance patient care and enable them to perform procedures safely and effectively.

Our operations are divided in the following markets: diagnostic and interventional cardiology, interventional radiology, interventional gastroenterology, interventional pulmonology, thoracic surgery, interventional nephrology, and vascular surgery. We believe we have been able to introduce new products and capture significant market share because of our expertise in product design, our proprietary technology and our skills in injection and insert molding.

Merit was organized in July 1987 as a Utah corporation. We also conduct our operations through a number of domestic and foreign subsidiaries. Our principal offices are located at 1600 West Merit Parkway, South Jordan, Utah, 84095, and our telephone number is (801) 253-1600.  See Item 2. “Properties.” We maintain an Internet website at www.merit.com. 




1


PRODUCTS
 
We design, develop, manufacture, and market innovative products that offer a high level of quality, value, and safety to our customers, as well as the patients they serve. We have devoted our attention to four primary areas: cardiology, radiology, pulmonology, and gastroenterology. Our products are also used in other clinical areas such as pain management, ear nose and throat physicians (“ENTs”), interventional nephrology, endovascular surgery, and thoracic surgery.

The success of our products is enhanced by the extensive experience of our management team in the healthcare industry, our experienced direct sales force and distributors, our ability to combine and customize devices, kits, trays and procedural packs at the request of our customers, and our dedication to offering facility-unique solutions in the markets we serve worldwide.
 
Cardiology and Radiology Products

Interventional cardiology and interventional radiology are specialty disciplines that use many common visualization techniques and therapeutic approaches to treat vascular disease. The common aspect of these two disciplines affords us the opportunity to gain product line efficiencies by serving two distinct therapeutic needs with very similar product platforms. We also recognize the unique aspects of the two disciplines and provide very specific products to serve the unique product needs of physicians practicing in the two disciplines.

Interventional cardiology is a branch of the medical specialty of cardiology that deals specifically with the catheter-based diagnosis and treatment of heart diseases. A large number of procedures that can be performed by catheterization involve the insertion of a sheath into the femoral, radial, or brachial artery. Fluoroscopy (real-time moving X-ray images) and computed tomography (“CT”) or three-dimensional computer generated images are most often used to visualize the vessels and chambers of the heart during these diagnostic and interventional procedures. Percutaneous coronary interventions (“PCI”) are used to treat coronary atherosclerosis and the resulting narrowing of the arteries of the heart. In 2011, we introduced the ASAP® Aspiration Catheter, a single extrusion wire braided catheter with a large aspiration lumen to facilitate quick aspiration of emboli and thrombi from tortuous anatomy.

Interventional radiology is related to the minimally invasive treatment of disease in peripheral vessels and organs of the body. Percutaneous peripheral interventions (“PPI”) are used to treat peripheral vascular disease conditions outside the heart.

Inflation Devices. During PCI and PPI procedures, balloons and/or stents are placed within the vasculature. The balloons must be carefully placed, inflated, and deflated within the vessel in order to achieve optimal results without injury to the patient. For more than two decades, we have offered an extensive, innovative line of inflation devices that accurately measure pressures during balloon and stent deployment. The Blue Diamond™ Digital Inflation Device features a new angled gauge for better viewing. Products like our IntelliSystem® and Monarch® inflation systems (state-of-the-art digital inflation systems), as well as the BasixCOMPAK™ Inflation Device, offer the clinician a wide range of features and prices, along with the quality and ergonomic superiority for which we are known.

Hemostasis Valves. We have developed a broad line of technically sophisticated, clinically acclaimed hemostasis valves, Merit Angioplasty Packs™ (MAP Kits) and angioplasty accessories. Hemostasis valves connect to catheters and allow passage of additional guide wires, balloon catheters, and other devices into the vasculature while reducing the amount of blood loss during the procedures. Our hemostasis brands include: Honor®, AccessPLUS™, Access-9™, DoublePlay™, MBA™ and MBA Plus™, and the Passage®.

Vascular Retrieval Devices. The EN Snare® Endovascular Snare System is intended for use in the cardiovascular system or hollow viscous to retrieve and manipulate foreign objects. The EN Snare® is designed with three interlaced loops to increase the probability of foreign body capture and is offered in seven sizes to accommodate a broad range of vessels throughout the body.

Vascular Access Products. We offer a broad line of devices used to gain and maintain vascular access while protecting the clinician from accidental cuts and needle sticks during procedures. These effective and useful devices and kits include the Futura® Safety Scalpel and an improved line of angiography needles (Merit Advance®), as well as the SecureLoc™ Introducer Needle. In addition, we offer an extensive line of sheath introducers (Prelude®) and mini access kits (MAK™ and S-MAK), which are designed to allow the clinician smooth, less traumatic, and convenient access to the patient’s vasculature.

Diagnostic Catheters. We offer diagnostic catheters for use during both cardiology and radiology angiographic procedures. Our diagnostic catheter offering includes our Impress® line of peripheral catheters and the Performa® line of cardiology catheters. These catheters offer interventional radiologists and cardiologists superior performance during a variety of angiography procedures.

2



Guide Wires and Torque Devices. Our diagnostic guide wires are used to traverse vascular anatomy and aid in placing catheters and other devices. Our pre-coated, high performance InQwire® diagnostic guide wires are lubricious and are available in a wide range of configurations to meet clinicians’ diagnostic needs. These wires provide enhanced maneuverability through tortuous anatomy. We also offer a line of torque devices (guide wire steering tools) that can be used on both standard and hydrophilic guide wires in both large and small diameters and are often included as a component in our angioplasty packs.

Angiography and Angioplasty Accessories. In 2011, we introduced the Flow Control Switch™, an integrated, one- handed, single-channel switch designed with clinician and patient safety in mind. Since the introduction of the CCS™, our coronary control syringe line, in 1988, we have continued to develop innovative, problem-solving devices, accessories, kits and procedure trays for use during minimally invasive diagnosis and treatment of coronary artery and peripheral disease. We now offer a broad range of specialty syringes including color-coded Medallion® syringes, and the proprietary VacLok® negative pressure syringe. The most recent line extensions to our syringe product family are frosted and sword-handled Medallion® syringes. Additionally, we offer an extensive line of kits containing fluid management products such as syringes, manifolds, stopcocks, tubing, and disposable pressure transducers (Meritrans®) for measurement of pressures within the vessels and chambers of the heart. The TRAM™ and TRAM-P™ Integrated Transducers combine a low torque manifold with the transducer. We also provide devices, kits, and procedure trays used to effectively and safely manage fluids, contrast media, and waste during angiography and interventional procedures. The Miser II™ contrast management system complements our comprehensive line of fluid management products used in angiography procedures.

Safety and Waste Management Systems. We offer a variety of safety-related products and kits. Our ShortStop® and ShortStop Advantage® temporary sharps holders address the potential safety issues associated with accidental needle sticks. Our extensive line of color-coded Medallion® Specialty Syringes and the PAL™ pen and label medication labeling system (which complies with the latest patient safety initiatives of The Joint Commission (formerly known as “JCAHO”) are designed to help minimize mix-ups in administering medication. We also offer waste management products to help avoid accidental exposure to contaminated fluids. These include our Occupational Safety and Health Administration (“OSHA”) compliant waste disposal basins: the BackStop®, BackStop+™, MiniStop®, MiniStop+™, and DugOut®. These products have been designed to complement other Merit devices and are included in many of our kits and procedure trays in order to make the clinical setting safer for both clinicians and the patients.

Radial Artery Compression Devices. In recent years, radial artery catheterization has become increasingly popular as an alternative to femoral artery access when performing diagnostic and interventional cardiology procedures. We have developed and now offer two independent, highly differentiated radial compression systems, including the Finale® and the RADStat®.

Drainage Catheters and Accessories. We have a broad line of catheters for nephrostomy, abscess, and other drainage procedures. Our ReSolve® non-locking and locking drainage catheter line has been expanded every year since the product family was introduced in 2006. These catheters’ unique, convenient locking mechanisms are appreciated by clinicians and patients who often comment on the enhanced comfort that the catheter provides them. We also offer a range of catheter fixation devices including the Revolution™ Catheter Securement Device which was designed to be cost-effective, to save time, and to enhance patient comfort. We also provide a wide selection of accessories that complement our drainage catheters, including tubing sets and drainage bags. For non-vascular applications, we offer mini access kits (MAK-NV™) designed for easy visualization and quick access into the drainage area. For enhanced visibility, the device features an echo-enhanced needle and radiopaque marker tip on the introducer.

Paracentesis, Thoracentesis and Pericardiocentesis Catheters.  Paracentesis is a procedure to remove fluid that has accumulated in the abdominal cavity (peritoneal fluid). Our One-Step™ Centesis Catheter, Safety Paracentesis Procedure Tray (“SPPT”) and Thoracentesis and Paracentesis Set (“TAPS”) are designed to provide clinicians with a safe, convenient, and cost-effective method for removing this fluid accumulation. Thoracentesis is a procedure to remove fluid that has accumulated in the pleural space. Our One-Step™ product line includes a valved version of the device. The valved One-Step™ Centesis Catheter and TAPS may also be used to remove the excess fluid in the pleural space during a thoracentesis. Pericardiocentesis is a procedure in which fluid is aspirated from the pericardial sac (the sac enveloping the heart). Our pericardiocentesis kit is designed as an organized, ready-to-use, convenient tray to assist the clinician in draining fluid quickly from the pericardial sac.               

Therapeutic Infusion Catheters. We offer an extensive line of therapeutic thrombolytic infusion systems featuring the Fountain® Infusion System and the Mistique® Infusion Catheter. These technically advanced catheters are used to treat thrombus (blood clot) formation in the peripheral vessels of the body, including native dialysis fistula and synthetic grafts.

Embolic Microspheres. In September 2010 we acquired BioSphere Medical, Inc. (“BioSphere”) in a merger transaction. With the acquisition of BioSphere, we now offer embolic microspheres and microsphere delivery systems. Microspheres are precisely-calibrated, spherical, hydrophilic, microporous beads made with acrylic copolymer cross-linked with gelatin. We also

3


offer microcatheters and small (“mini”) guide wires which are used as delivery systems for the embolic particles. These products include the following:

Embosphere® Microspheres and EmboGold® Microspheres, which are marketed for symptomatic uterine fibroids, hypervascularized tumors and arteriovenous malformations in the United States, The European Union and several other markets outside the United States;
 
HepaSphere™ Microspheres, which are marketed in the European Union, Brazil, and Russia for primary and metastatic liver cancer, and in the European Union and Russia for drug delivery in the treatment of primary and metastatic liver cancer; and

QuadraSphere® Microspheres, which are marketed for the treatment of hypervascularized tumors and arteriovenous malformations in the United States.

Multipurpose Microcatheters. With our acquisition of BioSphere, we expanded our multi-purpose microcatheter offering to include the EmboCath® Plus for the controlled and selected infusion of diagnostic media or the delivery of interventional devices or therapeutic pharmaceuticals into selected blood vessels. These specialty catheters are used to deliver various embolic agents, including microspheres, alcohol, metallic coils, poly-vinyl alcohol particles, and gel foam that can block blood vessels (e.g., for the purpose of stopping bleeding) to tissues or organs including uterine artery embolization for percutaneous (through the skin) treatment of uterine fibroids.

Dialysis and Interventional Nephrology. In 2011, we added the Centros® and the CentrosFLO™ split-tipped dialysis catheters to our chronic dialysis line. The ProGuide™ is considered a “workhorse” catheter for chronic dialysis and provides a platform for additional Merit products in the dialysis and interventional nephrology market. For example, the new Prelude® Short Sheath provides vascular access to dialysis grafts, along with our extensive line of micro access devices such as the MAK™ and S-MAK™ line of mini access kits. We also offer a wide range of guide wires, diagnostic catheters, therapeutic infusion systems, and safety products that can be used during dialysis-related procedures. The OuTake® Catheter Extractor is used to remove tunneled chronic dialysis catheters from dialysis patients. A curved introducer needle aids clinicians who choose to place a tunneled dialysis catheter over a wire with a single stick. The Slip-Not® Suture Retention Device provides a unique and effective method for securing a purse-string suture that controls bleeding after an arteriovenous (“AV”) fistula intervention. In addition, we offer the Impress® 30 cm angiographic catheters which can be used by interventional nephrologists. Our dialysis and interventional nephrology products are designed to provide comprehensive coverage for completing AV fistula interventions.

Interventional Gastroenterology and Pulmonology Products

Airway Stents. Through our Merit Endotek division, we sell a variety of non-vascular stents. Our AERO® and AERO DV® Fully Covered Tracheobronchial Stents are used by interventional pulmonologists, ENTs, and thoracic surgeons. These products offer our customers patented, fully covered, self-expanding metal stents used to improve patency of patient airways-both tracheal and bronchial-and to offer palliation to patients suffering from strictures caused by cancer.

Esophageal and Biliary Stents. The Alimaxx-ES® Fully Covered Esophageal Stent System and the Alimaxx-B® Biliary Stent System are used by interventional gastroenterologists to palliate symptoms associated with malignant tumors affecting the esophagus and the biliary duct. Additionally, we sell a plastic biliary stent that is used to restore patency and relieve symptoms associated with strictures and blockages within the biliary system. These stents are often used to “stage” treatment of malignant tumors such as pancreatic cancer and other serious conditions.

Stent Sizing Device. Merit Endotek also sells the AEROSIZER® tracheobronchial stent sizing device which is used in interventional pulmonology procedures. This proprietary product allows length and diameter measurement accuracy, thus minimizing the possibility of stent mis-sizing and associated cost and complications.

Guide Wires for Non-Vascular Procedures. MAXXWIRE® is a line of specialty guide wires that have pulmonology and gastroenterology applications.

Bipolar Coagulation Probes. Bipolar probes are used by physicians as one means of controlling bleeding within the gastrointestinal tract. Our Brighton™ Bipolar Probe is now sold directly by our Merit Endotek division and our original bipolar probe is sold on an original equipment manufacturer (“OEM”) basis to customers who market them to a large number of gastroenterologists.



4


Inflation Devices. Merit Endotek’s BIG60™ Inflation Device is a 60ml device designed to inflate and deflate non-vascular balloon dilators while monitoring and displaying inflation pressures up to 12 atmospheres. Merit Endotek also offers Endotek-labeled versions of the BasixCOMPAK™ and Monarch® inflation devices to customers in pulmonology, gastroenterology, and thoracic surgery.

Cholangiography Rapid Refill Continuous Injection Kits. Merit Endotek’s BiliQuick™ incorporates a convenient all-in-one kit that is used in gastroenterology to deliver contrast media both quickly and efficiently while eliminating unnecessary time spent refilling the injection syringe. Our Inject10n™ syringe is included in the kit.

Specialty Procedure Products

In addition to the procedures and devices detailed above, interventional radiology and other special procedure labs perform a variety of additional minimally invasive diagnostic and interventional procedures. We offer a variety of devices and accessories used during these procedures.

Discography Products.  Discography is a technique used to determine whether a disc is the source of pain in patients with back or neck pain. During discography, contrast medium is injected into the disc and the patient’s response to the injection is noted. Due to their quality and accuracy, our digital inflation devices (IntelliSystem® and Monarch®) are used in many pain management clinics.

Pressure Sensors. Our sensor division manufactures and sells microelectromechanical systems (“MEMS”) pressure sensor components focusing on piezoresistive pressure sensors in various forms, including bare silicon die, die mounted on ceramic substrates, and custom assemblies for specific customers.

MARKETING AND SALES

Target Market/Industry.  Our target markets include diagnostic and interventional cardiology, interventional radiology, interventional gastroenterology, interventional pulmonology, ENT, vascular surgery, interventional nephrology, pain management, and thoracic surgery.

According to government statistics, cardiovascular disease continues to be a leading cause of death and a significant health problem in the United States. Treatment options range from dietary changes to surgery, depending on the nature of the specific disease or disorder. Endovascular techniques, including angioplasty, stenting, and endoluminal stent grafts, continue to represent important therapeutic options for the treatment of vascular disease. We derive a large percentage of our revenues from sales of products used during percutaneous diagnostic and interventional procedures such as angiography, angioplasty, and stent placement and we intend to pursue additional sales growth by building on our existing market position in both catheter technology and accessory products.

In addition to products used in the treatment of coronary and peripheral vascular disease, we continue our efforts to develop and distribute other devices used in the major markets we serve. For example, we have developed and are distributing products used for percutaneous drainage. Prior to the widespread use of CT or ultrasound imaging, surgery was necessary to drain internal fluid from body cavities and organs. Currently, percutaneous drainage is frequently prescribed as the treatment of choice for many types of fluid collections. Our family of drainage catheters and associated devices are used by physicians in the interventional radiology, vascular surgery and the cardiology catheter lab for the percutaneous drainage collection of simple serous fluid to viscous fluid (blood, or infected secretion) within the body.

As part of our embolic microsphere sales and marketing efforts, we attend major medical conventions throughout the world pertaining to our targeted markets and invest in market development (including physician training), practice building, referral network education and patient outreach. We work closely with major interventional radiology centers in the areas of training, therapy awareness programs, clinical studies and ongoing research. 

We also service the growing interventional nephrology market. Dialysis, or cleaning of the blood, is necessary in conditions such as acute renal failure, chronic renal failure and end-stage renal disease, or ESRD. The kidneys remove excess water and chemical wastes from blood, permitting clean blood to return to the circulatory system. When the kidneys malfunction, waste substances are not properly excreted, creating an abnormal buildup of wastes in the bloodstream. Dialysis machines are used to treat this condition. Dialysis catheters, which connect the patient to the dialysis machine, are used at various stages in the treatment of dialysis patients. In the past few years, we have added catheters and other accessories to our dialysis-related product offering.



5


We believe our recently-created Endotek division and the move into the areas of interventional gastroenterology, pulmonology, ENT, and thoracic surgery will open up new opportunities to sell, not only existing Merit products, such as inflation devices, syringes, centesis catheters and procedure kits to those markets, but also to provide additional offerings built upon our non-vascular stent and guide wire technology.

In general, our target markets are characterized by rapid change resulting from technological advances and scientific discoveries. We plan to continue to develop and launch innovative products to support clinical trends and to address the increasing demands of these markets.

Market Strategy. Our marketing strategy is focused on identifying and introducing a regular flow of highly profitable differentiated products that meet customer needs. In order to stay abreast of customer needs, we seek suggestions from hospital personnel working with our products in cardiology and radiology applications, as well as gastroenterology, pulmonology and thoracic surgery. Suggestions for new products and product improvements may come from engineers, sales people, physicians and technicians who perform the clinical procedures.

When we determine that a product suggestion demonstrates a sustainable competitive advantage, meets customer needs, fits strategically and technologically with our business, and has a good potential financial return, we generally assemble a “project team” comprised of individuals from our sales, marketing, engineering, manufacturing, legal, and quality assurance departments. This team works to identify the customer requirements, integrate the design, compile necessary documentation and testing, and prepare the product for market introduction. We believe that one of our marketing strengths is our capacity to rapidly conceive, design, develop, and introduce new products.

U.S. and International Sales. Sales of our products in the United States accounted for 65%, 68% and 66% of our total sales for the years ended December 31, 2011, 2010 and 2009, respectively. Our direct sales force currently consists of an Executive Vice President of Marketing and Sales, a Vice President of U. S. Sales, 12 regional sales managers and 87 direct sales representatives and clinical specialists located in major metropolitan areas throughout the United States. To support our U.S. direct sales team we have developed a national account department that includes a Vice President of National Accounts, field-based Health System Account Directors and contract administrators. In addition, our Merit Endotek™ division maintains a separate worldwide sales force consisting of a division President, Vice President of Sales, Vice President of Marketing, three regional sales managers, and 15 direct sales representatives.

Approximately 400 independent dealer organizations and custom procedure tray manufacturers distribute our products worldwide, including territories in Europe, Africa, the Middle East, Asia, South and Central America, Australia and Canada. We have a President of our Technology Group, based in South Jordan, Utah, who directs our international sales efforts in Asia, South and Central America, Australia and Canada. We have an Executive Vice President based in Maastricht, The Netherlands, who directs distributor sales in Europe, the Middle East, and Africa. We also have a Vice President of European Sales who oversees direct sales in Europe. Approximately 30 direct sales representatives, country managers and clinical specialists presently sell our products in Germany, France, the United Kingdom, Belgium, The Netherlands, Denmark, Sweden, Finland, Ireland, Italy and Austria. We employ approximately 30 individuals who support the distribution and sale of our products in China. In 2011, our international sales grew approximately 32% over our 2010 international sales, and accounted for approximately $125.9 million or 35% of our total sales. Our new Merit Endotek division has a small, but growing, presence in international markets. With the recent and planned additions to our product lines, we believe that our international sales will continue to increase.

We require our international dealers to inventory products and sell directly to customers within defined sales territories. Each of our products must be approved for sale under the laws of the country in which it is sold. International dealers are responsible for compliance with all applicable laws and regulations in their respective countries.

We consider training to be a critical factor in the success of our direct sales force. Our sales representatives are trained by our personnel at our facilities, by a senior sales person in their respective territories, at regular national and regional sales meetings, by consulting cardiologists, radiologists, endoscopists, and thoracic surgeons and by observation of procedures in laboratories and operating rooms throughout the U.S.

OEM Sales. Our worldwide OEM division sells molded components, sub-assembled goods, custom kits, and bulk non-sterile goods which may be combined with other components and/or goods from other companies and then sold under a Merit or third-party label. Our OEM division consists of an Executive President of Global OEM, a Vice President of OEM Sales, a staff of regional sales representatives based in the US and Europe, and a dedicated OEM Engineering and Customer Service Group.




6


CUSTOMERS

We provide products to hospitals and clinic-based cardiologists, radiologists, anesthesiologists, physiatrists (pain management physicians), neurologists, nephrologists, vascular surgeons, interventional gastroenterologists and pulmonologists, thoracic surgeons, technicians and nurses. Hospitals and acute care facilities in the United States purchase our products through our direct sales forces, distributors, OEM partners, and custom procedure tray manufacturers who assemble and combine our products in custom kits and packs. Outside the United States, hospitals and acute care facilities purchase our products through our direct sales force, or, in the absence of a sales force, through independent distributors or OEM partners.

In 2011, our U.S. sales force made approximately 45% of our sales directly to U.S. hospitals (including 3% for our Merit Endotek division) and approximately 11% of our sales through other channels such as U.S. custom procedure tray manufacturers and distributors. We also sell products to other medical device companies through our U.S. OEM sales force, which accounted for approximately 9% of our 2011 sales. Approximately 35% of our 2011 sales were made to international markets by our direct European sales force, international distributors, and our OEM sales force (includes 3% for OEM international). Sales to our largest customer accounted for approximately four percent of total sales during the year ended December 31, 2011.

RESEARCH AND DEVELOPMENT

We remain committed to new product development by advancing leadership in all of our market segments. In 2011, we launched the ASAP® Aspiration Catheter in the United States which addresses a clinical need in cardiology for improved clot extraction. We also released the Blue Diamond™ Inflation Device for cardiology and radiology with an enhanced visual display and more information for clinicians performing angioplasty procedures. Inflation devices remain an important area in which we continue to innovate for our customers. We also launched the Big60™ Inflation Device for our Merit Endotek division which has a larger volume to facilitate stenting in the gastrointestinal and airway tracts. We anticipate that our research and development growth will continue into 2012 with the initiation of additional projects.

Our research and development expenses were approximately $21.9 million, $15.3 million, and $11.2 million in 2011, 2010 and 2009, respectively. Our research and development activities continue to be fueled with multiple product ideas guided by our Chief Executive Officer, our Vice President of Research and Development and our sales and marketing teams, as well as by collaboration with physicians with whom we have long-term relationships. We have research and development facilities in South Jordan, Utah; Angleton and Dallas, Texas; Jackson Township, New Jersey; Galway, Ireland; Paris, France and Venlo, The Netherlands.

During the year ended December 31, 2011, we entered into several asset acquisitions related to research and development projects, which resulted in aggregate expenses of approximately $4.9 million. Since technological feasibility of the underlying research and development projects had not been reached as of December 31, 2011 and such technology had no future alternative to us as of that date, the charge of approximately $4.9 million has been included in the accompanying consolidated statements of operations for the year ended December 31, 2011. We may enter into additional acquisition transactions in future periods.

MANUFACTURING

We manufacture many of our products utilizing our proprietary technology and our expertise in plastic injection and insert molding. We generally contract with third parties for the tooling of our molds, but we design and own most of our molds. We utilize our experience in injection and insert molding technologies in the manufacture of most of the custom components used in our products. We have received International Standards Organization (“ISO”) 13485:2003 certification for our facilities in Utah, Texas, Virginia, Massachusetts, Ireland and France. We have also received ISO 9001:2008 certification for our Merit Sensor Systems facility in South Jordan, Utah.

We either assemble the electronic monitors and sensors used in our IntelliSystem® and Monarch® inflation devices from standard electronic components or we purchase them from third-party suppliers. Merit Sensor Systems, Inc., our wholly-owned subsidiary (“Merit Sensors”), develops and markets silicon pressure sensors. Merit Sensors presently supplies all of the sensors we utilize in our digital inflation devices.

We currently produce and package all of our microspheres. Manufacturing of our microsphere products includes the synthesis and processing of raw materials and third-party manufactured compounds.

Our products are manufactured at several factories, including facilities located in South Jordan, West Jordan and Murray, Utah; Galway, Ireland; Venlo, The Netherlands; Paris, France; Angleton, Texas; and Chester, Virginia. See Item 2. “Properties.”  We have also contracted with a third-party manufacturer to produce some of our products at a contract manufacturing facility in

7


Mexico.

We have distribution centers located in South Jordan, Utah; Angleton, Texas; Chester, Virginia; Beijing, China; Hong Kong and Maastricht, The Netherlands.

We believe that our variety of suppliers for raw materials and components necessary for the manufacture of our products, as well as our long-term relationships with such suppliers, promote stability in our manufacturing processes. Historically, we have not been materially affected by interruptions with such suppliers. Furthermore, we seek to develop relationships with potential back-up suppliers for materials and components in the event of supply interruptions.

COMPETITION

We compete in several global markets, including diagnostic and interventional cardiology, interventional radiology, vascular surgery, interventional nephrology, cardiothoracic surgery, interventional gastroenterology and pulmonology, anesthesiology and pain management. These markets encompass a large number of suppliers of varying sizes.

In the interventional cardiology and radiology markets, as well as the gastroenterology and pulmonology markets, we compete with large international, multi-divisional medical supply companies such as Cordis Corporation (Johnson & Johnson), Boston Scientific Corporation, Medtronic, C.R. Bard, Abbott Laboratories, Teleflex, Cook Incorporated, and Terumo Corporation. Medium-size companies we compete with include AngioDynamics, Vascular Solutions, B. Braun, Olympus, Navilyst Medical, Edwards Lifesciences, and ICU Medical.

Our primary competitive embolotherapy product has been non-spherical polyvinyl alcohol (or “PVA”) particles, a product introduced into the market more than 20 years ago. Currently, the primary products with which our microspheres compete are spherical PVA, sold by Boston Scientific Corporation, BTG and Terumo Corporation; Embozene, sold by CeloNova Biosciences, Inc.; gel foam, sold by Pfizer Inc.; and non-spherical (particle) PVA, sold by Boston Scientific and Cook Incorporated.  Our principal competitors in uterine fibroid embolization (“UFE”) are BTG, Boston Scientific, Cook, Cordis Corporation (Johnson & Johnson), Pfizer and Terumo, as well as companies selling or developing non-embolotherapy solutions for UFE.

The principal competitive factors in the markets in which our products are sold are quality, price, value, device feature, customer service, breadth of line, and customer relationships. We believe our products have achieved market acceptance due to the quality of materials and workmanship of our products, their innovative design, our willingness to customize our products to fit customer needs, and our prompt attention to customer requests. Our products are priced competitively, but generally not below prices for competing products. One of our primary competitive strengths is our relative stability in the marketplace; a comprehensive, broad line of ancillary products; and our history of introducing a variety of new products and product line extensions to the market on a regular basis.

Based on available industry data, with respect to the number of procedures performed, we believe we are the leading provider of digital inflation technology in the world. In addition, we believe we are one of the market leaders in the United States for inflation devices, hemostasis devices and torque devices. We believe we are one of two market leaders in the United States for control syringes, waste-disposal systems, tubing, and manifold kits. We anticipate the recent and planned additions to our product lines will enable us to compete even more effectively in both the U.S. and international markets. There is no assurance that we will be able to maintain our existing competitive advantages or compete successfully in the future.

Within the field of uterine artery embolization, we believe we are the market share leader and one of only three companies in the United States to have embolic products specifically indicated for use in UFE. Based on both research and clinical studies conducted on our product for UFE, we believe we offer physicians a high degree of consistent and predictable product performance, ease of use, targeted delivery, and durable vessel occlusion, and therefore satisfactory short- and long-term clinical outcomes validated by peer-reviewed publications, when compared to our competitors.

We derive a substantial majority of our revenues from sales of products used in diagnostic angiography and interventional cardiology and radiology procedures. Medical professionals are starting to use new interventional procedures and devices, as well as drugs for the treatment and prevention of cardiovascular disease. These new methods, procedures and devices may render some of our products obsolete or limit the markets for our products. However, with the advent of vascular stents and other procedures, we have experienced continued growth in sales of our products.





8



PROPRIETARY RIGHTS AND PATENT LITIGATION

We have a number of U.S. and foreign-issued patents and pending patent applications, including patents and rights to patent applications acquired through strategic transactions, which relate to various aspects of our products and technology. The duration of our patents is determined by the laws of the country of issuance and for the U.S. is typically 20 years from the date of filing of the patent. As of December 31, 2011, we owned more than 400 U.S. and international patents and patent applications. We also operate under licenses from other owners of certain patents, patent applications, technology, trade secrets, know-how, copyrights and trademarks.

Merit and the Merit logo are trademarks in the U.S. and other countries. In addition to Merit and the Merit logo, we have used, registered or applied for registration of other specific trademarks and service marks to help distinguish our products, technologies, and services from those of our competitors in the U.S. and foreign countries. See “Products” above. The duration of our trademark registrations varies from country to country, and in the U.S. we generally are able to maintain our trademark rights and renew any trademark registrations for as long as the trademarks are in use. We have received over 200 U.S. and foreign trademark registrations, and other U.S. and foreign trademark applications are currently pending.

Some of our products and product documentation are protected under U.S. and international copyright laws related to the protection of intellectual property and proprietary information. We have registered copyrights relating to certain software used in our electronic inflation devices.

A third party has asserted that certain of our product offerings infringe their patents. Monetary judgments, remedies or restitution are often not determined until the conclusion of trial court proceedings, which can be modified on appeal, and are difficult to predict or quantify. While our pending litigation is in its preliminary stages and it is not possible to assess damages or predict an outcome, an adverse outcome could limit our ability to sell certain products or reduce our operating margin on the sale of these products and could have a material adverse effect on our financial position, results of operations or liquidity. We have established defenses and intend to vigorously defend our position.

REGULATION

FDA Regulation. The FDA and other federal, state and local authorities regulate our products and product-related activities. Pursuant to the U.S. Food, Drug, and Cosmetic Act (“FDCA”) and the regulations promulgated under that act, the FDA regulates the design, development, clinical trials, testing, manufacture, packaging, labeling, storage, distribution and promotion of medical devices. We believe that our products and procedures are in material compliance with all applicable FDA regulations, but the regulations regarding the manufacture and sale of our products are subject to change. We cannot predict the effect, if any, that these changes might have on our business, financial condition and results of operations. In addition, if the FDA believes that we are not in compliance with the FDCA, it can institute proceedings to detain or seize products, require a recall, enjoin future violations and/or seek civil and criminal penalties against us and our officers and employees. If we fail to comply with these regulatory requirements, our business, financial condition and results of operations could be harmed.

FDA Premarket Review. Subject to certain specific exemptions issued by the FDA, we cannot introduce a new medical device into the market until we obtain market clearance through a 510(k) premarket notification or approval through a pre-market approval (“PMA”) application.

The FDA’s 510(k) clearance procedure is less rigorous than the PMA approval procedure, but is available only to sponsors who can establish that their device is substantially equivalent to a legally-marketed “predicate” device that was either on the market prior to the enactment of the Medical Devices Amendments of 1976 or has been cleared through the 510(k) procedure. 510(k) clearance usually takes between three months and one year from the date a 510(k) notification is submitted, but it may take longer. The FDA may find that substantial equivalence has not been shown and, as a result, require additional clinical or non-clinical testing to support a 510(k) or require a PMA application.

PMA applications must be supported by valid scientific evidence to demonstrate the safety and effectiveness of the subject device. Such evidence typically includes the results of human clinical trials, bench tests and laboratory and animal studies. The PMA application must also contain a complete description of the device and its components, and a detailed description of the manufacturing process and controls for the device. As part of the PMA application review, the FDA will inspect the manufacturer’s facilities for compliance with the FDA’s Quality System Regulations (“QSR”). If the FDA approves the PMA, it may place restrictions on the device. If the FDA’s evaluation of the PMA application or the manufacturing facility is not favorable, the FDA may deny approval of the PMA application or issue a “not approvable” letter. The FDA may also require additional clinical trials, which can delay the PMA approval process by several years. The PMA application process can be expensive and generally takes

9


several years to complete. After the PMA is approved, if significant changes are made to a device, its manufacturing or labeling, a PMA supplement containing additional information must be filed for prior FDA approval.

If human clinical trials of a medical device are required for FDA clearance or approval and the device presents a significant risk, the sponsor of the trial must file an investigational device exemption (“IDE”) application with the FDA prior to commencing human clinical trials. The IDE application must be supported by data, typically including the results of animal and/or laboratory testing. If the IDE application is approved by the FDA and one or more institutional review boards (“IRBs”), human clinical trials may begin at a specific number of institutional investigational sites with the specific number of patients approved by the FDA. If the device presents a non-significant risk to the patient, a sponsor may begin the clinical trial after obtaining approval for the trial by one or more IRBs without separate approval from the FDA. Submission of an IDE application does not give assurance that the FDA will issue the IDE. If the IDE application is approved, there can be no assurance the FDA will determine that the data derived from the trials support the safety and effectiveness of the device or warrant the continuation of clinical trials. An IDE supplement must be submitted to and approved by the FDA before a sponsor or investigator may make a change to the investigational plan in such a way that may affect its scientific soundness, study indication or the rights, safety or welfare of human subjects. The trial must also comply with the FDA’s regulations, including the requirement that informed consent be obtained from each subject.

The FDA clearance and approval processes for medical devices are expensive, uncertain and lengthy. There can be no assurance that we will be able to obtain necessary regulatory clearances or approvals for any product on a timely basis or at all. Delays in receipt of or failure to receive such clearances or approvals, the loss of previously received clearances or approvals, or the failure to comply with existing or future regulatory requirements could have a material adverse effect on our business, financial condition and results of operations.

In October 2009, BioSphere submitted to the FDA an IDE seeking to commence a clinical trial to compare the effectiveness of QuadraSphere® Microspheres. On November 29, 2010, the FDA approved a phase 3 clinical trial protocol to treat primary liver cancer with QuadraSphere® Microspheres combined with the chemotherapeutic agent doxorubicin compared to conventional transarterial chemoembolization, or cTACE, with doxorubicin. Enrollment has begun both in Europe and in the United States. Our inability to complete this trial or unfavorable or inconsistent data from this trial may adversely affect our ability to obtain approval for this new indication.

Changes in Cleared or Approved Devices. We must obtain new FDA 510(k) clearance or supplemental premarket approval when there is a major change or modification in the intended use or indications for use of a legally marketed device or a change or modification of the device, including certain manufacturing changes, product enhancements and product line extensions of a legally marketed device, as required by FDA regulations. In some cases, supporting clinical data may be required. The FDA may determine that a new or modified device is not substantially equivalent to a predicate device or may require that additional information, including clinical data, be submitted before a determination is made, either of which could significantly delay the introduction of new or modified device products.

Current Good Manufacturing Practice Quality System Regulation and Reporting. The FDCA requires us to comply with the Quality System Regulation (“QSR”) and Good Manufacturing Practice (“GMP”) requirements pertaining to all aspects of our product design and manufacturing processes, including requirements for packaging, labeling and record keeping, complaint handling, corrective and preventive actions and internal auditing. The FDA enforces these requirements through periodic inspections of medical device manufacturers. In addition, the Medical Device Reporting (“MDR”) regulation requires us to inform the FDA whenever information reasonably suggests that one of our devices may have caused or contributed to a death or serious injury, or when one of our devices has malfunctioned, if the device would be likely to cause or contribute to a death or a serious injury in the event the malfunction were to recur.

Labeling and Promotion. Labeling and promotional activities are also subject to scrutiny by the FDA. Labeling includes not only the label on a device, but also includes any descriptive or informational literature that accompanies or is used to promote the device. Among other things, labeling violates the law if it is false or misleading in any respect or it fails to contain adequate directions for use. Moreover, product claims that are outside the labeling either approved or cleared by the FDA violate the FDCA. Allegations of off-label promotion can result in enforcement action by both federal and state agencies, including the FDA, the Department of Justice, the Office of Inspector General of the Department of Health and Human Services, state attorneys general, as well as liability under the False Claims Act, discussed further below.

Federal Trade Commission. Our product promotion is also subject to regulation by the Federal Trade Commission (the “FTC”), which has primary oversight of the advertising of unrestricted devices. The Federal Trade Commission Act prohibits unfair methods of competition and unfair or deceptive acts or practices in or affecting commerce, as well as unfair or deceptive practices such as the dissemination of any false advertisement pertaining to medical devices. FTC enforcement can result in orders requiring, among other things, limits on advertising, corrective advertising, consumer redress, rescission of contracts and such

10


other relief as may be deemed necessary.

Import Requirements. To import a device, the importer must file an entry notice and bond with the United States Bureau of Customs and Border Protection (“CBP”). All devices are subject to FDA examination before release from the CBP. Any article that appears to be in violation of the FDCA may be refused admission and a notice of detention and hearing may be issued. If the FDA ultimately refuses admission, CBP may issue a notice for redelivery and assess liquidated damages for up to three times the value of the lot.

Export Requirements. Products for export from Europe and from the United States are subject to foreign countries’ import requirements and the exporting requirements of the FDA or European regulating bodies, as applicable. In particular, international sales of medical devices manufactured in the United States that are not approved or cleared by the FDA for use in the United States, or are banned or deviate from lawful performance standards, are subject to FDA export requirements.

Foreign countries often require, among other things, an FDA certificate for products for export, also called a Certificate for Foreign Government. To obtain this certificate from the FDA, the device manufacturer must apply to the FDA. The FDA certifies that the product has been granted clearance or approval in the United States and that the manufacturing facilities were in compliance with Quality Systems Regulation regulations at the time of the last FDA inspection.

Foreign Regulations.    Medical device laws and regulations are also in effect in many countries outside of the United States. These laws and regulations vary significantly from country to country and range from comprehensive device approval requirements for some or all of our medical device products to more basic requests for product data or certification. The number and scope of these requirements are increasing.

In particular, marketing of medical devices in the European Economic Area (“EEA”) is subject to compliance with European Medical Device Directives. Under this regime, a medical device may be placed on the market within the EEA if it conforms to certain “essential requirements” and bears the European Conformity (“CE”) mark. The most fundamental essential requirement is that a medical device must be designed and manufactured in such a way that it will not compromise the clinical condition or safety of patients, or the safety and health of users and others. In addition, the device must achieve the performances intended by the manufacturer and be designed, manufactured and packaged in a suitable manner.

Manufacturers must demonstrate that their devices conform to the relevant essential requirements through a conformity assessment procedure. The nature of the assessment depends upon the classification of the device. The classification rules are mainly based on three criteria: the length of time the device is in contact with the body, the degree of invasiveness and the extent to which the device affects the anatomy. Conformity assessment procedures for all but the lowest risk classification of device involve a notified body. Notified bodies are often private entities and are authorized or licensed to perform such assessments by government authorities. Manufacturers usually have some flexibility to select conformity assessment procedures for a particular class of device and to reflect their circumstances, e.g., the likelihood that the manufacturer will make frequent modifications to its products. Conformity assessment procedures require an assessment of available clinical evidence, literature data for the product and post-market experience in respect of similar products already marketed. Notified bodies also may review the manufacturer’s quality systems. If satisfied that the product conforms to the relevant essential requirements, the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity and application of the CE mark. Application of the CE mark allows the product to be distributed throughout the EEA.

Failure to materially comply with applicable EEA and other foreign medical device laws and regulations would likely have a material adverse effect on our business. In addition, the European Commission is currently considering revising the legal framework for medical evidence in the EEA and has announced its intention to proposed new legislation during the course of 2012. If the current EEA and other foreign regulations regarding the manufacture and sale of medical devices change, the new regulations may impose additional obligations on medical device manufactures or otherwise have a material adverse effect on our business.

Reimbursement. Our products are used in medical procedures generally covered by government or private health plans. In general, a third-party payer covers a medical device or procedure only when the plan administrator is satisfied that the product or procedure is reasonable and necessary to the treatment of the patient. Some private payers in the U.S. and government payers in foreign countries may also condition payment on the cost-effectiveness of the treatment. Even if a device has received clearance or approval for marketing by the FDA, there is no certainty that third-party payers will reimburse patients for the cost of the device and related procedures. Even if coverage is available, third-party payers may place restrictions on the circumstances in which they provide coverage or may offer reimbursement that is not sufficient to cover the cost of our products. If hospitals and physicians cannot obtain adequate reimbursement for our products or the procedures in which they are used, our business, financial condition, results of operations, and cash flows could suffer a material adverse impact.

11



Patient Protection and Affordable Care Act. In March 2010, the U.S. Congress enacted legislation known as the Patient Protection and Affordable Care Act (“PPACA”), which we anticipate will substantially change the way that health care in the United States is financed by both governmental and private insurers and will significantly affect the medical device industry. This new law contains a number of provisions, including provisions governing enrollment in federal health care programs, reimbursement changes, the increased use of comparative effectiveness research in health care decision-making, and enhancements to fraud and abuse requirements and enforcement, that will affect existing government health care programs and will result in the development of new programs. A number of provisions contained in the PPACA may adversely affect our net revenue for our marketed products and any future products. The new legislation, among other things, subjects most medical devices to a 2.3% excise tax, beginning January 1, 2013, which may have a material effect on our results of operations and financial condition.

The PPACA also includes new reporting and disclosure requirements for device manufacturers with regard to payments or other transfers of value made to health care providers. Reporting under these provisions is scheduled to commence in March 2013, and the first report will relate to payments or other transfers of value made in 2012. Reports submitted under these new requirements will be placed in a public database. If we fail to provide these reports, or if the reports we provide are not accurate, we could be subject to significant penalties. In addition, developing the necessary systems to comply with the new reporting requirement could be financially burdensome.

Anti-Kickback Statutes. The Medicare and Medicaid Patient Protection Act of 1987, as amended, which is more commonly known as the federal health-care Anti-Kickback Statute, prohibits persons from, among other things, knowingly and willfully offering or paying remuneration, directly or indirectly, to a person to induce the purchase, order, lease, or recommendation of a good or service for which payment may be made in whole or part under a federal health-care program such as Medicare or Medicaid. The definition of remuneration has been broadly interpreted to include anything of value, including, for example, gifts, discounts, the furnishing of supplies or equipment, credit arrangements, payments of cash and waivers of payments. Several courts have interpreted the statute’s intended requirement to mean that if any one purpose of an arrangement involving remuneration is to induce referrals or otherwise generate business involving goods or services reimbursed in whole or in part under federal health-care programs, the statute has been violated. Certain exceptions, including payments to bona fide employees, certain discounts and certain payments to group purchasing organizations, are provided in the statute and/or have been promulgated through regulation. Violations can result in significant penalties, imprisonment and exclusion from Medicare, Medicaid and other federal health-care programs. Exclusion of a manufacturer would preclude any federal health-care program from paying for its products. In addition, kickback arrangements can provide the basis for an action under the Federal False Claims Act, which is discussed in more detail below.

Recognizing that the Anti-Kickback Statute is broad and may technically prohibit many innocuous or beneficial arrangements, the Office of Inspector General of Health and Human Services (“OIG”) issued a series of regulations, generally known as “safe harbors.” These safe harbors set forth provisions that, if all the applicable requirements are met, will ensure that health-care providers and other parties will not be prosecuted under the Anti-Kickback Statute. The failure of a transaction or arrangement to fit precisely within one or more safe harbors does not necessarily mean that it is illegal or that prosecution will be pursued. However, conduct and business arrangements that do not fully satisfy an applicable safe harbor may result in increased scrutiny by government enforcement authorities such as the OIG. Arrangements that implicate the Anti-Kickback Statute, and that do not fall within a safe harbor, are analyzed by the OIG on a case-by-case basis.

Government officials have focused recent enforcement efforts on the sales and marketing activities of pharmaceutical, medical device, and other health-care companies, and recently have brought cases against individuals or entities that allegedly offered unlawful inducements to potential or existing customers in an attempt to procure their business. Settlements of these cases by health-care companies have involved significant fines and/or penalties and in some instances criminal pleas.

In addition to the Federal Anti-Kickback Statute, many states have their own anti-kickback laws. Often, these laws closely follow the language of the federal law, although they do not always have the same exceptions or safe harbors. In some states, these anti-kickback laws apply with respect to all payers, including commercial health insurance companies.

False Claims Laws.    Federal false claims laws prohibit any person from knowingly presenting, or causing to be presented, a false claim for payment to the federal government or knowingly making, or causing to be made, a false statement to get a false claim paid. Manufacturers can be held liable under false claims laws, even if they do not submit claims to the government, if they are found to have caused submission of false claims. The Federal Civil False Claims Act also includes whistle blower provisions that allow private citizens to bring suit against an entity or individual on behalf of the United States and to recover a portion of any monetary recovery. Many of the recent highly publicized settlements in the health-care industry relating to sales and marketing practices have been cases brought under the False Claims Act. The majority of states also have adopted statutes or regulations similar to the federal false claims laws, which apply to items and services reimbursed under Medicaid and other state

12


programs, or, in several states, apply regardless of the payer. Sanctions under these federal and state laws may include civil monetary penalties, exclusion of a manufacturer’s products from reimbursement under government programs, criminal fines and imprisonment.

Privacy and Security. The Health Insurance Portability and Accountability Act of 1996 (“HIPAA”), the Health Information Technology for Economic and Clinical Health Act (the “HITECH Act”), and the rules promulgated thereunder, require certain entities, referred to as covered entities (including most health care providers and health plans), to comply with established standards, including standards regarding the privacy and security of protected health information (“PHI”). HIPAA further requires that covered entities enter into agreements meeting certain regulatory requirements with their business associates, as such term is defined by HIPAA, which, among other things, obligate the business associates to safeguard the covered entity’s PHI against improper use and disclosure. In addition, a business associate may face significant statutory and contractual liability if the business associate breaches the agreement or causes the covered entity to fail to comply with HIPAA. In the course of our business operations, we have entered into several business associate agreements with certain of our customers that are covered entities. Pursuant to the terms of these business associate agreements, we have agreed, among other things, not to use or further disclose the covered entity’s PHI except as permitted or required by the agreements or as required by law, to use reasonable administrative, physical, and technical safeguards to prevent prohibited disclosure of such PHI and to report to the covered entity any unauthorized uses or disclosures of such PHI. Accordingly, we incur compliance-related costs in meeting HIPAA-related obligations under business associate agreements to which we are a party. Moreover, if we fail to meet our contractual obligations under such agreements, we may incur significant liability.

In addition, HIPAA’s criminal provisions potentially could be applied to a non-covered entity that aided and abetted the violation of, or conspired to violate, HIPAA, although we are unable at this time to determine conclusively whether our actions could be subject to prosecution in the event of an impermissible disclosure of health information to us. Also, many state laws regulate the use and disclosure of health information. Those state laws that are more protective of individually identifiable health information are not preempted by HIPAA. Finally, in the event we change our business model and become a HIPAA-covered entity, we would be directly subject to HIPAA, its rules and its civil and criminal penalties.

Environmental Regulations. We are subject to various federal, state, local and foreign laws and regulations relating to the protection of the environment, as well as public and worker health and safety. In the course of our business, we are involved in the handling, storage and disposal of certain chemicals. The laws and regulations applicable to our operations include provisions that regulate the release or discharge of hazardous or other regulated materials into the environment. Usually these environmental laws and regulations impose “strict liability,” rendering a person liable without regard to negligence or fault on the part of such person. Such environmental laws and regulations may expose us to liability for the conduct of, or conditions caused by, others, or for acts that were in compliance with all applicable laws at the time the acts were performed. To date, we have not been required to expend material amounts in connection with our efforts to comply with environmental requirements and currently do not believe that compliance with such requirements will have a material adverse effect upon our capital expenditures, results of operations or competitive position in the future. Failure to comply with applicable environmental and related laws could have a material adverse effect on our business. Our operations are also subject to various laws and regulations relating to occupational health and safety. We maintain safety, training and maintenance programs as part of our ongoing efforts to ensure compliance with applicable laws and regulations. Compliance with applicable health and safety laws and regulations has required and continues to require substantial expenditures. Environmental, health and safety legislation and regulations change frequently.

EMPLOYEES

As of December 31, 2011, we employed 2,400 people.

AVAILABLE INFORMATION

We file annual, quarterly and current reports and other information with the SEC. These materials can be inspected and copied at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549. Copies of these materials may also be obtained by mail at prescribed rates from the SEC’s Public Reference Room at the above address. Information about the Public Reference Room can be obtained by calling the SEC at 1-800-SEC-0330. The SEC also maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The address of the SEC’s Internet website is www.sec.gov.

We make available, free of charge, on our Internet website, located at www.merit.com, our most recent Annual Report on Form 10-K, our most recent Quarterly Report on Form 10-Q, any Current Reports on Form 8-K filed since our most recent Annual Report on Form 10-K, and any amendments to such reports as soon as reasonably practicable following the electronic filing of such report with the SEC. In addition, we provide electronic or paper copies of such filings free of charge upon request.

13



FINANCIAL INFORMATION ABOUT FOREIGN AND DOMESTIC SALES

For financial information relating to our foreign and domestic sales see Note 12 to our consolidated financial statements set forth in Item 8 of this report.

Item 1A. 
Risk Factors.

Our business, operations and financial condition are subject to certain risks and uncertainties. Should one or more of these risks or uncertainties materialize, or should any underlying assumptions prove incorrect, our actual results will vary, and may vary materially, from those anticipated, estimated, projected or expected. Among the key factors that may have a direct bearing on our business, operations or financial condition are the factors identified below:

A significant adverse change in, or failure to comply with, governing regulations could adversely affect our business, operations or financial condition.

Substantially all of our products are “devices,” as defined in the FDCA, and the manufacture, distribution, record keeping, labeling and advertisement of substantially all of our products are subject to regulation by the FDA in the United States and equivalent regulatory agencies in various foreign countries in which our products are manufactured, distributed, labeled, offered or sold. Further, we are subject to regular review and periodic inspections at our facilities with respect to compliance with the FDCA, QSRs and similar requirements of foreign countries. Some physicians may be using our products in procedures that are not included in the clearance or approval of the products. If the FDA or any other foreign, federal or state enforcement agency were to conclude that we have improperly promoted our products for uncleared or unapproved indications, the FDA or such other agency could allege that our promotional activities misbrand or adulterate our products or violate other legal requirements, which could result in investigations, prosecutions, or other civil or criminal actions.

On February 1, 2012, Merit Medical Ireland Ltd., one of our wholly-owned subsidiaries (“Merit Ireland”), received a warning letter from the FDA (the “Warning Letter”) regarding modifications to the coating process for our Laureate® Hydrophilic Guidewire (the “Guidewire”). In the Warning Letter, the FDA alleged that recent modifications to the Guidewire’s coating process constitute a significant change or modification that could significantly affect the safety or effectiveness of the Guidewire. The FDA claimed that the Guidewire is adulterated because we do not have an approved application for premarket approval in effect pursuant to Section 515(a) of the FDCA or an approved application for an investigational device exemption under Section 520(g) of the Act. The Warning Letter also sets forth the FDA’s position that the Guidewire is misbranded under Section 502(o) of the FDCA, because we did not notify the FDA of our intent to introduce the modified Guidewire into commercial distribution, as required by Section 510(k) of the Act. The Warning Letter requested that we provide certain information to the FDA regarding modifications to the Guidewire. We have responded to the Warning Letter; however, there can be no assurance that the FDA will accept our response and approve the actions we have taken with respect to the Guidewire or permit us to manufacture, sell, market or distribute the Guidewire in the United States as currently offered and packaged. There can be no assurances regarding the length of time or cost required to resolve these issues to our satisfaction and to the satisfaction of the FDA. Our inability to resolve these issues in a timely manner may further delay Guidewire launch schedules within and to the United States, which may weaken our competitive position in the market for guidewires or other products. If we are unable to favorably resolve the concerns expressed in the Warning Letter, or if we fail to satisfy any other requirements established by the FDA or one or more foreign regulatory authorities, our sales of the Guidewire or other products could be restricted, which could adversely affect our business, operations or financial condition. Furthermore, we may need to devote additional financial and human resources to our efforts to resolve regulatory issues or concerns, and the FDA may elect to take additional regulatory actions.  

In addition, we are subject to certain export control restrictions administered by the U.S. Department of the Treasury and may be subject to regulations administered by other regulatory agencies in various foreign countries to which our products are exported. Although we believe we are currently in material compliance with these requirements, any failure on our part to comply with all applicable current and future regulations could adversely affect our business, operations, or financial condition.

Our products may be subject to recall or product liability claims.

Our products are used in connection with invasive procedures and in other medical contexts in which it is important that those products function with precision and accuracy. If our products do not function as designed, or are designed improperly, we may choose to or be forced by regulatory agencies to recall such products from the market. Such a recall could result in significant costs and could divert management’s attention from our business.

In addition, if medical personnel or their patients suffer injury in connection with the use of our products, whether as a

14


result of a failure of our products to function as designed, an inappropriate design or for any other reason, we could be subject to lawsuits seeking significant compensatory and punitive damages. We have previously faced claims by patients claiming injuries from our products. To date, these claims have not resulted in a material negative impact on our operations or financial condition; however, patients or customers may bring claims in a number of circumstances, including if our products were misused, if our products’ manufacture or design was flawed, if our products produced unsatisfactory results, or if the instructions for use and other disclosure of product-related risks for our products were found to be inadequate. The outcome of this type of personal injury litigation is difficult to assess or quantify. We maintain product liability insurance but there is no assurance that this coverage will be sufficient to satisfy any claim made against us. Moreover, any product liability claim brought against us, with or without merit, could result in significant costs, could increase our product liability insurance rates, or could prevent us from securing coverage in the future. As a result, any product recall or lawsuit seeking significant monetary damages may have a material adverse effect on our business, operations or financial condition.

We generally offer a limited warranty for product returns which are due to defects in quality and workmanship. We attempt to estimate our potential liability for future product returns and establish reserves on our financial statements in amounts that we believe will be sufficient to address our warranty obligations; however, our actual liability for product returns may significantly exceed the amount of our reserves. If we underestimate our potential liability for future product returns, or if unanticipated events result in returns that exceed our historical experience, our financial condition and operating results could be materially and adversely affected.

We may be unable to protect our proprietary technology or may infringe on the proprietary technology of others.

We have obtained U.S. patents and filed additional U.S. and foreign patent applications; however, there can be no assurance that any patents we hold, or for which we have applied, will provide us with any significant competitive advantages, that third parties will not challenge our patents, or that patents owned by others will not have an adverse effect on our ability to conduct business. We could incur substantial costs in preventing patent infringement, in curbing the unauthorized use of our proprietary technology by others, or in defending against similar claims of others. Since we rely on trade secrets and proprietary know-how to maintain our competitive position, there can be no assurance that others may not independently develop similar or superior technologies.

We operate in an increasingly competitive medical technology marketplace. There has also been substantial litigation regarding patent and other intellectual property rights in the medical device industry. Our activities may require us to defend against claims and actions alleging infringement of the intellectual rights of others. If a court rules against us in any patent litigation, any of several negative outcomes could occur: we could be subject to significant liabilities, we could be forced to seek licenses from third parties, or we could be prevented from marketing certain products. Any of these outcomes could have a material adverse effect on our financial condition or operating results.

We have been named as a party to a patent infringement lawsuit and are, from time to time, involved in other litigation, regulatory proceedings or other disputes. The outcomes of pending litigation are difficult to predict or quantify. The pending litigation is in its preliminary stages and it is not possible to assess damages or predict an outcome; however, an adverse outcome could limit our ability to sell certain products or reduce our operating margin on the sale of these products. The expense of defending such litigation may be costly and divert our management’s attention from the day-to-day operations of our business, which could adversely affect our business, results of operations or cash flows. In addition, an unfavorable outcome in such litigation could negatively impact our business, results of operations or cash flows. Similar infringement claims may be asserted against us in the future related to events not presently known to our management. Because we are self-insured with respect to intellectual property infringement claims, a significant claim against us could have a material adverse effect on our financial position or results of operations.

Our ability to remain competitive is dependent, in part, upon our ability to prevent other companies from using our proprietary technology incorporated into our products. We seek to protect our technology through a combination of patents, trademarks, and trade secrets, as well as licenses, proprietary know-how and confidentiality agreements. We may be unable, however, to prevent others from using our proprietary information, or may be unable to continue to use such information for our own purposes, for numerous reasons, including the following, any of which could have an adverse effect on our business, operations, or financial condition:

Our issued patents may not be sufficiently broad to prevent others from copying our proprietary technologies.
Our issued patents may be challenged by third parties and deemed to be overbroad or unenforceable.
Our products may infringe on the patents or other intellectual property rights of other parties, requiring us to alter or discontinue our manufacture or sale of such products.
Costs associated with seeking enforcement of our patents against infringement, or defending our activities against

15


allegations of infringement, may be significant.
Our pending patent applications may not be granted for various reasons, including over breadth or conflict with an existing patent.
Other persons or entities may independently develop, or have developed, similar or superior technologies.
All of our patents will eventually expire, and some of our patents, including patents protecting significant elements of our technology, will expire within the next several years.

Recent healthcare reform legislation may have a material adverse effect on our business, financial condition, results of operations and cash flows.

The Patient Protection and Affordable Care Act was enacted into law in the U.S. in March 2010. Certain provisions of the legislation will not be effective for a number of years. There are many programs and requirements for which the details have not yet been fully established or consequences not fully understood, and it is unclear what the full impact of the legislation will be. The legislation imposes on medical device manufacturers a 2.3% excise tax on U.S. sales of certain medical devices beginning in 2013. This tax burden may have a material, negative impact on our results of operations and our cash flows. In addition, the costs of compliance with the Patient Protection and Affordable Care Act’s new reporting and disclosure requirements with regard to payments or other transfers of value made to health care providers may have a material, negative impact on our results of operations and our cash flows. We cannot predict what healthcare programs and regulations will be ultimately implemented at the federal or state level, or the effect of any future legislation or regulation in the U.S. or internationally. However, any changes that lower reimbursements for our products or reduce medical procedure volumes could adversely affect our business and results of operations.

The agreements and instruments governing our debt contain restrictions and limitations that could significantly affect our ability to operate our business, as well as significantly affect our liquidity.

We have entered into an unsecured Credit Agreement, dated September 10, 2010 (the “Credit Agreement”), with the lenders who are or may become party thereto (collectively, the “Lenders”) and Wells Fargo Bank, National Association (“Wells Fargo”), as administrative agent for the Lenders. The Credit Agreement contains a number of significant covenants that could adversely affect our ability to operate our business, our liquidity, and our results of operations. These covenants restrict, among other things, our and our subsidiaries’ ability to incur additional debt; repurchase or redeem equity interests and debt; issue equity; make certain investments or acquisitions; pay dividends or make other distributions; dispose of assets or merge; enter into related party transactions; and grant liens and pledge assets.

Our breach of any covenants in the Credit Agreement, not otherwise cured, waived or amended, could result in a default under the applicable debt obligations and could trigger acceleration of those obligations. Any default under the Credit Agreement could adversely affect our ability to service our debt and to fund our planned capital expenditures and ongoing operations.  

We will be required to expend significant resources for research, development, testing and regulatory approval or clearance of our products under development and these products may not be developed successfully or approved for commercial use.
Most of our products under development will require significant additional research, development, engineering and preclinical and/or clinical testing, as well as regulatory approval or clearance and a commitment of significant additional resources prior to their commercialization. It is possible that they may not: be developed successfully; be proven safe and effective in clinical trials; offer therapeutic or other improvements over current treatments and products; meet applicable regulatory standards or receive regulatory approvals or clearances; be capable of production in commercial quantities at acceptable costs and in compliance with regulatory requirements; or be successfully marketed or covered by private or public insurers.

We are currently conducting a clinical trial in an effort to obtain approval from the FDA to claim the use of the QuadraSphere® microspheres for the treatment of a specific disease or condition, such as the treatment of liver cancer in the United States. European Union regulations do not currently require such an application for this class of medical device. In order for us to obtain FDA approval or clearance to promote the use of QuadraSphere® microspheres for the treatment of liver cancer through embolization, we will need to complete our ongoing clinical trial and submit positive clinical data to the FDA. If we cannot enroll study subjects in sufficient numbers to complete the necessary studies, if there is a disruption in the supply of materials for the trial or if any other factors preclude us from completing the trial in a timely manner we will likely not be able to complete our ongoing clinical trial. Even if we complete our current clinical trial, the FDA may require us to undertake additional testing, or the trial results may not be sufficient to obtain FDA approval for other reasons. If we do not obtain FDA approval, we will not be able to promote our QuadraSphere® microspheres for the treatment of specific diseases or conditions (including liver cancer) in the United States.


16


The medical device industry is experiencing greater scrutiny and regulation by governmental authorities.

Our medical devices and business activities are subject to rigorous regulation by the FDA and other federal, state and international governmental authorities. These authorities and members of Congress have been increasing their scrutiny over the medical device industry. In recent years, the U.S. Congress, Department of Justice, the Office of Inspector General of the Department of Health and Human Services, and the Department of Defense have issued subpoenas and other requests for information to medical device manufacturers, primarily related to financial arrangements with health care providers, regulatory compliance and product promotional practices. We anticipate that the government will continue to scrutinize our industry closely, and that additional regulation by government authorities may increase compliance costs, exposure to litigation, and other adverse effects to our operations.

Potential reforms to the FDA’s 510(k) process could adversely affect our business, operations, or financial condition.

In August 2010, the FDA issued its preliminary recommendations on reform of the 510(k) premarket notification process for medical devices. On January 19, 2011, the FDA announced its “Plan of Action” for implementing these recommendations. The Plan of Action included 25 action items, including revising existing guidance or developing guidance to clarify various aspects of the 510(k) process and to streamline the review process for innovative, lower risk products (the “de novo” process); improving training for the Center for Devices and Radiological Health (“CDRH”) staff and industry; increasing reliance on external experts; and addressing and improving internal processes. FDA has already begun implementing many of these reforms, and may implement other reforms in the future, which could have the effect of making it more difficult and expensive for us to obtain 510(k) clearance.

Limits on reimbursement imposed by governmental and other programs may adversely affect our business.

The cost of a significant portion of medical care is funded by governmental, and other third-party insurance programs. Limits on reimbursement imposed by such programs may adversely affect the ability of hospitals and others to purchase our products. In addition, limitations on reimbursement for procedures which utilize our products could adversely affect our business.

We are subject to laws targeting fraud and abuse in the healthcare industry, the violation of which could adversely affect our business or financial results.

Our operations are subject to various state and federal laws targeting fraud and abuse in the healthcare industry, including federal anti-kickback laws, which prohibit any person from knowingly and willfully offering, paying, soliciting or receiving remuneration, directly or indirectly, to induce or reward either the referral of an individual, or the furnishing or arranging for an item or service, for which payment may be made under federal healthcare programs, such as the Medicare and Medicaid programs. Violations of these fraud and abuse-related laws are punishable by criminal or civil sanctions, including substantial fines, imprisonment and exclusion from participation in healthcare programs such as Medicare and Medicaid, any of which could adversely affect our business or financial results.

If our employees or agents violate the U.S. Foreign Corrupt Practices Act or anti-bribery laws in other jurisdictions, we may incur fines or penalties, or experience other adverse consequences.

We are subject to the U.S. Foreign Corrupt Practices Act (“FCPA”) and similar anti-bribery laws in non-U.S. jurisdictions. The FCPA generally prohibits companies and their intermediaries from illegally offering things of value to non-U.S. officials for the purpose of obtaining or retaining business. As we continue to expand our business activities internationally, compliance with the FCPA and other anti-bribery laws presents greater challengers to our operations. If our employees or agents violate the provisions of the FCPA or other anti-bribery laws, we may incur fines or penalties, which could have a material adverse effect on our operating results or financial condition.

Increases in the price of commodity components, particularly petroleum-based products, or loss of supply could have an adverse effect on our business.

Many of our products have components that are manufactured using resins, plastics and other petroleum-based materials. Our ability to operate profitably is dependent, in large part, on the availability and pricing of these materials. The availability of these products is affected by a variety of factors beyond our control, including political uncertainty in the Middle East, and there is no assurance that crude oil supplies will not be interrupted in the future. Any such interruption could have an adverse effect on our ability to produce, or on the cost to produce, our products. Also, crude oil prices generally fluctuate based on a number of factors beyond our control, including changes in supply and demand, general economic conditions, labor costs, fuel-related transportation costs, competition, import duties, tariffs, currency exchange rates and political uncertainty in the Middle East. Our suppliers may pass some of their cost increases on to us, and if such increased costs are sustained or increase further, our suppliers

17


may pass further cost increases on to us. In addition to the effect on resin prices, transportation costs generally increase based on the effect of higher crude oil prices, and these increased transportation costs may be passed on to us. Our ability to recover such increased costs may depend upon our ability to raise prices on our products. Due to the highly competitive nature of the healthcare industry and the cost-containment efforts of our customers and third-party payors, we may be unable to pass along cost increases through higher prices. If we are unable to fully recover these costs through price increases or offset these increases through cost reductions, we could experience lower margins and profitability and our business, results of operations, financial condition and cash flows could be materially and adversely affected.

Economic and industry conditions constantly change, and negative economic conditions in the United States and other countries could materially and adversely affect our business and results of operations.

Our business and our results of operation are affected by many changing economic and other conditions beyond our control. Actual or potential changes in international, national, regional and local economic, business and financial conditions, including recession and inflation, may negatively affect consumer preferences, perceptions, spending patterns or demographic trends, any of which could adversely affect our business or results of operations. We may also experience higher bad-debt rates and slower receivable collection rates in our dealings with our customers. In addition, recent disruptions in the credit markets have resulted in greater volatility, less liquidity, widening of credit spreads, and decreased availability of financing. As a result of these factors, there can be no assurance that financing will be available to us on acceptable terms, if at all. An inability to obtain necessary additional financing on acceptable terms may have an adverse impact on us and on our ability to grow our business.

Termination or interruption of relationships with our suppliers, or failure of such suppliers to perform, could disrupt our business.

We rely on raw materials, component parts, finished products, and services supplied by outside third parties in connection with our business. For example, substantially all of our products are sterilized by only a few different entities. In addition, some of our products are manufactured or assembled by third parties. If a supplier of significant raw materials, component parts, finished goods, or services were to terminate its relationship with us, or otherwise cease supplying raw materials, component parts, finished goods, or services consistent with past practice, our ability to meet our obligations to our end customers may be disrupted. A disruption with respect to numerous products, or with respect to a few significant products, could have a material adverse effect on our business, operations or financial condition.

We may be unable to successfully manage growth, particularly if accomplished through acquisitions.

Successful implementation of our business strategy will require that we effectively manage any associated growth. To manage growth effectively, our management will need to continue to implement changes in certain aspects of our business, to improve our information systems and operations to respond to increased demand, to attract and retain qualified personnel, and to develop, train, and manage an increasing number of management-level and other employees. Growth could place an increasing strain on our management, financial, product design, marketing, distribution and other resources, and we could experience operating difficulties. Any failure to manage growth effectively could have a material adverse effect on our business, operations or financial condition.

To the extent that we grow through acquisitions, we will face the additional challenges of integrating the operations, culture, information management systems and other characteristics of the acquired entity with our own. We have incurred, and may incur, significant expenses in connection with negotiating and consummating one or more transactions, and we may inherit significant liabilities in connection with prospective acquisitions. In addition, we may not realize competitive advantages, synergies or other benefits anticipated in connection with any such acquisition. If we do not adequately identify targets for, or manage issues related to, our future acquisitions, such acquisitions may have an adverse effect on our business and financial results.

Fluctuations in foreign currency exchange rates may negatively impact our financial results.

Our principal market risk relates to changes in the value of the Euro and Great Britain Pound (“GBP”) relative to the value of the U.S. Dollar. As our operations have grown outside the United States, we have also become subject to market risk relating to the Chinese Yuan, Hong Kong Dollar and the Swedish and Danish Kroner. Those fluctuations could have a negative impact on our margins and financial results. For example, during 2011, the exchange rate between all applicable foreign currencies and the U.S. Dollar resulted in a decrease in our gross revenues of approximately $1.9 million.

For the year ended December 31, 2011, approximately $59.5 million, or 16.6%, of our sales, were denominated in foreign currencies. If the rate of exchange between the Euro, GBP, Chinese Yuan, Hong Kong Dollar or Swedish or Danish Kroner declines against the U.S. Dollar, we may not be able to increase the prices we charge our customers for products whose prices are denominated

18


in Euros, GBP, Chinese Yuan, Hong Kong Dollars or Swedish or Danish Kroner. Furthermore, we may be unable or elect not to enter into hedging transactions which could mitigate the effect of declining exchange rates. As a result, if the rate of exchange between Euros, GBP, Chinese Yuan, Hong Kong Dollars or Swedish or Danish Kroner declines against the U.S. Dollar, our financial results may be negatively impacted.

We depend on generating sufficient cash flow to fund our debt obligations, capital expenditures, and ongoing operations.

We are dependent on our cash on hand and free cash flow to fund our debt obligations, capital expenditures and ongoing operations. Our ability to service our debt and to fund our planned capital expenditures and ongoing operations will depend on our ability to continue to generate cash flow. If we are unable to generate sufficient cash flow or we are unable to access additional liquidity sources, we may not be able to service or repay our debt, operate our business, respond to competitive challenges, or fund our other liquidity and capital needs.

A significant portion of our revenues are derived from a few products, procedures and/or customers.

A significant portion of our revenues are attributable to sales of our inflation devices. During the year ended December 31, 2011, sales of our inflation devices (including inflation devices sold in custom kits and through OEM channels) accounted for approximately 19% of our total revenues. Sales of our inflation devices to a single OEM customer, representing our largest customer, were approximately 16% of our total inflation device sales for the year ended December 31, 2011. Any material decline in market demand, or change in OEM supplier preference, for our inflation devices could have an adverse effect on our business, operations or financial condition.

In addition, the products that have accounted for a majority of our historical revenues are designed for use in connection with a few related medical procedures, including angioplasty, stent placement procedures, and spinal procedures. If subsequent developments in medical technology or drug therapy make such procedures obsolete, or alter the methodology of such procedures so as to eliminate the usefulness of our products, we may experience a material decrease in demand for our products and experience deteriorating financial performance.

We may be unable to compete in our markets, particularly if there is a significant change in relevant practices or technology.

The markets in which our products compete are highly competitive. We face competition from many companies which are larger, better established, have greater financial, technical and other resources and possess a greater market presence than we do. Such resources and market presence may enable our competition to more effectively market competing products or to market competing products at reduced prices in order to gain market share.

In addition, our ability to compete successfully is dependent, in part, upon our response to changes in technology and upon our efforts to develop and market new products which achieve significant market acceptance. Competing companies with substantially greater resources than us are actively engaged in research and development of new methods, treatments, drugs, and procedures to treat or prevent cardiovascular disease that could limit the market for our products and eventually make some of our products obsolete. A reduction in the demand for a significant number of our products, or a few key products, could have a material adverse effect on our business, operations or financial condition.

The market price of our Common Stock has been, and may continue to be, volatile.

The market price of our Common Stock has at times been, and may in the future be, volatile for various reasons, including those discussed in these risks factors, which could have a material adverse effect on our business, operations or financial condition. Other events that could cause volatility in our stock, include without limitation, quarter-to-quarter variances in our financial results; analysts’ and other projections or recommendations regarding our Common Stock specifically or medical technology stocks generally; any restatement of our financial statements or any investigation of us by the SEC, the FDA or another regulatory authority; or a decline, or rise, of stock prices in the capital markets generally.

Operations at our manufacturing facilities may be negatively impacted by certain factors, including severe weather conditions and natural disasters.

Our operations could be affected by many factors beyond our control, including severe weather conditions and natural disasters, including hurricanes and tornadoes. These conditions could cause substantial damage to our facilities, interrupt our production and disrupt our ability to deliver products to our customers.

Our operations in Angleton, Texas have been suspended due to hurricanes in recent years. In September 2008, we shut

19


down our operations in Angleton in anticipation of Hurricane Ike and production was restored shortly thereafter. While we incurred minimal damage to our facility, we experienced greater financial damage as a result of the production disruption. Although our insurance proceeds covered some of the losses associated with the event, future natural disasters could increase the cost of insurance. We cannot be certain that any losses from business interruption or property damage, along with potential increases in insurance costs, will not have a material adverse effect on our results of operations or financial condition.

We are dependent upon key personnel.

Our success is dependent on key management personnel, including Fred P. Lampropoulos, our Chairman of the Board, President and Chief Executive Officer. Mr. Lampropoulos is not subject to any agreement prohibiting his departure, and we do not maintain key man life insurance on his life. The loss of Mr. Lampropoulos, or of certain other key management personnel, could have a materially adverse effect on our business and operations. Our success also depends on, among other factors, the successful recruitment and retention of key operating, manufacturing, sales and other personnel.

We are subject to work stoppage, transportation and related risks.

We manufacture products at various locations in the United States and foreign countries and sell our products worldwide. We depend on third-party transportation companies to deliver supplies necessary to manufacture our products from vendors to our various facilities and to move our products to customers, operating divisions, and other subsidiaries located worldwide. Our manufacturing operations, and the operations of the transportation companies on which we depend, may be adversely affected by natural disasters or significant human events, such as a war, terrorist attack, riot, strike, slowdown or similar event. Any disruption in our manufacturing or transportation could materially and adversely affect our ability to meet customer demands or our operations.

Domestic and international economic conditions could adversely affect our business and results of operations.

We are subject to risks arising from adverse changes in general domestic and global economic conditions, including the current global economic slowdown, European sovereign debt crisis, and disruption of credit markets. There can be no assurance that there will not be further deterioration in global or regional economies. Our customers may experience financial difficulties or be unable to borrow money to fund their operations which may adversely impact their ability or decision to purchase or pay for our products.  For example, our customers, particularly in the European region, may extend or delay payments for products already provided, which may lead to collectability concerns with respect to our accounts receivable. The strength and timing of any economic recovery remains uncertain, and we cannot predict to what extent the global economic slowdown and European sovereign debt crisis may negatively impact our average selling prices, our net sales and profit margins, procedural volumes and reimbursement rates from third party payors.

Our failure to comply with applicable environmental laws and regulations could affect our business and results of operations.

We manufacture and assemble certain products that require the use of hazardous materials that are subject to various national, federal, state and local laws and regulations governing the protection of the environment, health and safety. While the cost of compliance with such laws and regulations has not had a material adverse effect on our results of operations historically, compliance with future regulations may require additional capital investments. Additionally, because we use hazardous and other regulated materials in our manufacturing processes, we are subject to certain risks of future liabilities, lawsuits and claims resulting from any substances we manufactured, disposed of or released. Any accidental release may have an adverse effect on our business and results of operations. We cannot predict what additional environmental, health and safety legislation or regulations will be enacted or become effective in the future or how existing or future laws or regulations will be administered or interpreted with respect to our operations, capital expenditures, results of operations or competitive position. Compliance with more stringent laws or regulations or adverse changes in the interpretation of existing laws or regulations by government agencies could have a material adverse effect on our financial position and the results of our operations and could require substantial expenditures.

Item 1B. 
Unresolved Staff Comments.

None.

Item 2.
Properties.

Our world headquarters is located in South Jordan, Utah, with our principal office for European operations located in Galway, Republic of Ireland. We also receive support for European operations from a second European distribution and customer service facility located in Maastricht, The Netherlands. In addition, we lease office space in Washington D.C.; Jackson Township,

20


New Jersey; Beijing, Hong Kong and Shanghai, China and Tokyo, Japan. Our principal manufacturing facilities are located in South Jordan, Utah; West Jordan, Utah; Murray, Utah; Angleton, Texas; Chester, Virginia; Galway, Republic of Ireland; Paris, France; and Venlo, The Netherlands. Our research and development activities are conducted principally at facilities located in South Jordan, Utah; Paris, France; and Galway, Republic of Ireland.  The following is an approximate summary of our facilities as of December 31, 2011 (in square feet):

 
Owned
 
Leased
 
Total
U.S.
358,525

 
346,012

 
704,537

International
96,000

 
38,147

 
134,147

 
454,525

 
384,159

 
838,684


In August 2010, we acquired approximately five acres of real property located in the Parkmore East Business Park in Galway, Ireland. In November 2010, we commenced construction of a 74,680 square foot production, warehouse, and research and development building located on the parcel in the Parkmore East Business Park in Galway, Ireland. We anticipate that construction of the new building will be completed during the first quarter of 2012.

In late 2010, we commenced construction of a production, warehouse and administration office building, which will total approximately 253,000 square feet, at our world headquarters in South Jordan, Utah. We anticipate that construction of the new building will be completed in late 2012. In 2011, we completed construction of a parking structure totaling approximately 244,000 square feet located at our world headquarters in South Jordan, Utah.

In August 2011, we acquired approximately twelve acres of property in Pearland, Texas. In December 2011, we commenced construction of a production, clean room, warehouse and administrative office building on the acquired property. The new building will total approximately 117,000 square feet. The new building will be used to relocate our Angleton, Texas, manufacturing facility and is designed to provide better protection from natural disasters, modernized facilities and room for future expansion.

We believe that our existing and proposed facilities will generally be adequate for our present and future anticipated levels of operations.

Item 3.
Legal Proceedings.

See Note 9 “Commitments and Contingencies” set forth in the notes to our consolidated financial statements included in Item 8 of this Annual Report.

Item 4.
Mine Safety Disclosures.

The disclosure required by this item is not applicable.

21


PART II
  
Item 5.  
Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

MARKET PRICE FOR THE COMMON STOCK

Our Common Stock is traded on the NASDAQ Global Select Market under the symbol “MMSI.” The following table sets forth high and low sale prices for the Common Stock for the periods indicated, after giving effect to a stock dividend of one share of our Common Stock that we distributed for every four shares of Common Stock outstanding on May 2, 2011.

For the year ended December 31, 2011
 
High
 
Low
First Quarter
 
$
20.10

 
$
14.23

Second Quarter
 
$
24.20

 
$
17.03

Third Quarter
 
$
19.23

 
$
12.52

Fourth Quarter
 
$
14.24

 
$
12.32

 
For the year ended December 31, 2010
 
High
 
Low
First Quarter
 
$
15.88

 
$
11.02

Second Quarter
 
$
13.62

 
$
11.42

Third Quarter
 
$
14.20

 
$
12.38

Fourth Quarter
 
$
13.28

 
$
11.71


As of February 21, 2012, the number of shares of Common Stock outstanding was 41,999,063 held by approximately 140 shareholders of record, not including shareholders whose shares are held in securities position listings.

DIVIDENDS

We have never declared or paid cash dividends on the Common Stock. We presently intend to retain any future earnings for use in our business and, therefore, do not anticipate paying any dividends on the Common Stock in the foreseeable future. In addition, our Credit Agreement contains covenants prohibiting the declaration and distribution of a cash dividend at any time prior to the termination of the Credit Agreement.


22


PERFORMANCE GRAPH

The following graph compares the performance of the Common Stock with the performance of the NASDAQ Stock Market (U.S. Companies) and NASDAQ Stocks (SIC 3840-3849 U.S. Companies - Surgical, Medical and Dental Instruments and Supplies) for a five-year period by measuring the changes in Common Stock prices from December 31, 2006 to December 31, 2011.

Comparison of 5 Year Cumulative Total Return
Among Merit Medical Systems, Inc., NASDAQ Stock Market (U.S.)
and NASDAQ Stocks (SIC 3840-3849)
 

 
12/2006
 
12/2007
 
12/2008
 
12/2009
 
12/2010
 
12/2011
Merit Medical Systems, Inc.
$
100

 
$
88

 
$
113

 
$
121

 
$
100

 
$
106

NASDAQ Stock Market (U.S. Companies)
100

 
108

 
66

 
95

 
113

 
114

NASDAQ Stocks (SIC 3840-3849 U.S. Companies)
100

 
135

 
74

 
100

 
107

 
120


The stock performance graph assumes for comparison that the value of the Common Stock and of each index was $100 on December 31, 2006 and that all dividends were reinvested. Past performance is not necessarily an indicator of future results.

NOTE:
 
Performance graph data is complete through last fiscal year.
NOTE:
 
Performance graph with peer group uses peer group only performance (excludes only Merit).
NOTE:
 
Peer group indices use beginning of period market capitalization weighting.
NOTE:
 
Index Data: Calculated (or Derived) based from CRSP NASDAQ Stock Market (US Companies), Center for Research in Security Prices (CRSP®), Graduate School of Business, The University of Chicago. Copyright 2012. Used with permission. All rights reserved.


23


SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS

The following table contains information regarding our equity compensation plans as of December 31, 2011 (in thousands):

 
 
 
Number of
securities to be
issued upon
exercise of
outstanding
options, warrants
and rights
 
Weighted-average
exercise price of
outstanding options,
warrants and rights
 
Number of securities
remaining available for
future issuance under
equity compensation plans
(excluding securities
reflected in column (a) )
Plan category
 
(a)
 
(b)
 
(c)
Equity compensation Plans approved by security holders
 
4,077(1),(3)
 
$11.96
 
1,786(2),(3)
 
 
 
 
 
 
 
 
(1)    Consists of 4,076,806 shares of Common Stock subject to the options granted under the Merit Medical Systems, Inc. 2006 Long-Term Incentive Plan.

(2)    Consists of 359,227 shares available to be issued under the Merit Medical Systems, Inc. Qualified and Non-Qualified Employee Stock Purchase Plan and 1,427,000 shares available to be issued under the Merit Medical Systems, Inc. 2006 Long-Term Incentive Plan.

(3)    See Note 11 to our consolidated financial statements set forth in Item 8 of this report for additional information regarding these plans.

24


Item 6.
Selected Financial Data (in thousands, except per share amounts). 

 
Years Ended December 31,
 
2011
 
2010
 
2009
 
2008
 
2007
OPERATING DATA:
 

 
 

 
 

 
 

 
 

Net Sales
$
359,449

 
$
296,755

 
$
257,462

 
$
227,143

 
$
207,768

Cost of Sales
193,981

 
168,257

 
148,660

 
133,872

 
127,977

Gross Profit
165,468

 
128,498

 
108,802

 
93,271

 
79,791

 
 
 
 
 
 
 
 
 
 
Operating Expenses:
 

 
 

 
 

 
 

 
 

Selling, general, and administrative
104,502

 
87,615

 
64,787

 
53,127

 
48,133

Research and development
21,938

 
15,335

 
11,168

 
9,160

 
8,688

Acquired in-process research and development
5,838

 

 

 

 

Goodwill impairment charge

 
8,344

 

 

 

 
 
 
 
 
 
 
 
 
 
Total operating expenses
132,278

 
111,294

 
75,955

 
62,287

 
56,821

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Income From Operations
33,190

 
17,204

 
32,847

 
30,984

 
22,970

 
 
 
 
 
 
 
 
 
 
Other Income (Expense):
 

 
 

 
 

 
 

 
 

Interest income
129

 
34

 
178

 
781

 
393

Interest expense
(789
)
 
(596
)
 
(28
)
 
(17
)
 
(3
)
Other income
345

 
146

 
97

 
97

 
39

Other income (expense)—net
(315
)
 
(416
)
 
247

 
861

 
429

 
 
 
 
 
 
 
 
 
 
Income Before Income Taxes
32,875

 
16,788

 
33,094

 
31,845

 
23,399

 
 
 
 
 
 
 
 
 
 
Income Tax Expense
9,831

 
4,328

 
10,564

 
11,118

 
7,811

 
 
 
 
 
 
 
 
 
 
Net Income
$
23,044

 
$
12,460

 
$
22,530

 
$
20,727

 
$
15,588

 
 
 
 
 
 
 
 
 
 
Earnings Per Common Share:
 

 
 

 
 

 
 

 
 

Diluted
$
0.58

 
$
0.35

 
$
0.63

 
$
0.58

 
$
0.44

 
 
 
 
 
 
 
 
 
 
Average Common Shares:
 

 
 

 
 

 
 

 
 

Diluted
39,733

 
35,976

 
35,758

 
35,688

 
35,255

 
 
 
 
 
 
 
 
 
 
BALANCE SHEET DATA:
 

 
 

 
 

 
 

 
 

Working capital
$
89,857

 
$
72,125

 
$
57,706

 
$
84,283

 
$
60,194

Total assets
447,017

 
369,480

 
271,513

 
231,776

 
200,420

Line of credit

 

 
7,000

 

 

Long-term debt
30,737

 
81,538

 

 

 

Stockholders’ equity
357,089

 
235,615

 
218,809

 
194,305

 
164,368

 
During the quarter ended September 30, 2010, we determined that our goodwill related to our endoscopy reporting unit was impaired and we recorded an impairment charge of approximately $8.3 million, which was offset by approximately $3.2 million of deferred tax asset. We determined that, based on estimated future cash flows for this reporting unit, discounted back to their present value using a discount rate that reflects the risk profiles of the underlying activities, the carry value amount of this reporting unit was less than its estimated fair value. Some of the factors that influenced our estimated cash flows were slower sales growth in the products acquired from our Alveolus, Inc. ("Alveolus") acquisition in March of 2009, uncertainty regarding acceptance of new products and continued operating losses for our endoscopy business segment.


25


Item 7. 
Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion and analysis of our financial condition and results of operation should be read in conjunction with the Consolidated Financial Statements and related Notes thereto, which are included in Item 8 of this report.  Although our financial statements are prepared in accordance with accounting principles which are generally accepted in the United States of America (“GAAP”), our management believes that certain non-GAAP financial measures provide investors with useful information regarding the underlying business trends and performance of our ongoing operations, and can be useful for period-over-period comparisons of such operations. Included in our management's discussion and analysis of our financial condition and results of operation are references to some non-GAAP financial measures.  Readers should consider these non-GAAP measures in addition to, not as a substitute for, financial reporting measures prepared in accordance with GAAP. These non-GAAP financial measures exclude some, but not all, items that may affect our net income.  Additionally, these financial measures s may not be comparable with similarly-titled measures of other companies.


OVERVIEW

We design, develop, manufacture and market single-use medical products for interventional and diagnostic procedures. For financial reporting purposes, we report our operations in two operating segments: cardiovascular and endoscopy. Our cardiovascular segment consists of cardiology and radiology devices which assist in diagnosing and treating coronary arterial disease, peripheral vascular disease and other non-vascular diseases and includes the embolotherapeutic products we acquired through our acquisition of BioSphere. Our endoscopy segment consists of gastroenterology and pulmonology medical devices which assist in the palliative treatment of expanding esophageal, tracheobronchial and biliary strictures caused by malignant tumors.

For the year ended December 31, 2011, we reported record sales of approximately $359.4 million, up approximately $62.7 million or 21.1%, over 2010 sales of approximately $296.8 million. Our base business sales (which exclude BioSphere’s embolization device sales) increased 13.5% or approximately $40.5 million for the year ended December 31, 2011, compared to the year ended December 31, 2010. Sales of BioSphere embolization devices accounted for an increase in total sales of 7.5%, or approximately $22.2 million, for the year ended December 31, 2011, compared to the year ended December 31, 2010.

Gross profits as a percentage of sales was 46.0% for the year ended December 31, 2011, compared to 43.3% for the year ended December 31, 2010. The improvement in gross profits was primarily due to an increase in sales of higher-margin BioSphere products and higher prices and unit sales through our distribution system in China.

Net income for the year ended December 31, 2011 was approximately $23.0 million, up 85%, or $.58 per share, compared to approximately $12.5 million or $.35 per share, for the year ended December 31, 2010. Our net income results for 2011 included acquired in-process research and development and stepped-up inventory cost charges of approximately $4.0 million, net of tax, while our 2010 net income results included a goodwill impairment charge of approximately $5.2 million, net of tax, and non-recurring BioSphere acquisition costs including legal, accounting, investment banking, severance and stepped-up inventory costs, net of tax, of approximately $4.3 million. Excluding these items, net income for the years ended December 31, 2011 and 2010 would have been approximately $27.0 million and $22.0 million, respectively.

On June 22, 2011, we completed our first equity offering since 1992 of 5,520,000 shares of Common Stock (the “Equity Offering”) and received proceeds of approximately $87.7 million, which is net of approximately $4.6 million in underwriting discounts and commissions and approximately $127,000 in other direct costs incurred and paid by us in connection with this equity offering. In the short term, we used the proceeds of the Equity Offering to pay down amounts owing under our Credit Agreement and reduce interest costs. In the longer term, we intend to use the portion of our Wells Fargo credit facility that was repaid with the proceeds of the Equity Offering to invest in additional capacity and expansion, new products, and other business development opportunities.

During 2011, we began enrollment of patients into our Hi-Quality Clinical Trial Protocol for the Treatment of Primary Liver Cancer. In 2011, we incurred costs of approximately $553,000 in connection with the trial protocol. We plan to spend a total of approximately $10.0 million over four years to complete this trial. We anticipate that we will spend approximately $3.5 million during 2012 towards this trial.

Our business continues to grow in most of our geographic regions and product groups. As our sales continue to grow in international markets, we plan to continue to expand our product offerings in strategic foreign markets. Our international sales for the year ended December 31, 2011 represented 35% of our total sales, compared to 32% of our total sales for the year ended December 31, 2010. We believe the investments we have made over the past few years in acquisitions and internally-developed

26


products are paying off. Our acquisitions are providing best-in-class products, as well as the pull-through of other core products we sell, which has helped accelerate our sales growth.


RESULTS OF OPERATIONS

The following table sets forth certain operational data as a percentage of sales for the years indicated:

 
2011
 
2010
 
2009
Net sales
100%
 
100%
 
100%
Gross profit
46.0
 
43.3
 
42.3
Selling, general, and administrative expenses
29.1
 
29.5
 
25.2
Research and development expenses
6.1
 
5.2
 
4.3
Acquired in-process research and development
1.6
 
 
Goodwill impairment charge
 
2.8
 
Income from operations
9.2
 
5.8
 
12.8
Income before income taxes
9.1
 
5.7
 
12.9
Net income
6.4
 
4.2
 
8.8

Listed below are the sales by business segment for the years ended December 31, 2011, 2010 and 2009 (in thousands):

 
% Change
 
2011
 
% Change
 
2010
 
% Change
 
2009
Cardiovascular
 
 
 

 
 
 
 

 
 
 
 

Stand-alone devices
15%
 
$
101,959

 
16%
 
$
88,586

 
12%
 
$
76,075

Custom kits and procedure trays
11%
 
91,532

 
11%
 
82,799

 
12%
 
74,541

Inflation devices
8%
 
67,353

 
2%
 
62,495

 
(1)%
 
61,058

Catheters
23%
 
55,357

 
18%
 
44,824

 
23%
 
38,126

Embolization devices
247%
 
31,229

 
 
9,003

 
 

Total
21%
 
347,430

 
15%
 
287,707

 
10%
 
249,800

 
 
 
 
 
 
 
 
 
 
 
 
Endoscopy
 
 
 

 
 
 
 

 
 
 
 

Endoscopy devices
33%
 
12,019

 
18%
 
9,048

 
 
7,662

 
 
 
 
 
 
 
 
 
 
 
 
Total
21%
 
$
359,449

 
15%
 
$
296,755

 
13%
 
$
257,462


Cardiovascular Sales. Our cardiovascular sales for the year ended December 31, 2011 were approximately $347.4 million, up 20.8%, when compared to the comparable period for 2010 of approximately $287.7 million. Sales were favorably affected by an increase in sales of our embolization devices of approximately $22.2 million, or 7.7%; an increase in sales of our stand-alone devices (particularly our Merit Laureate® Hydrophilic guide wire, hemostasis valves and manifolds) of approximately $13.4 million, or 4.7%; and increased sales of catheter devices (particularly our Prelude® sheath product line, aspiration catheter product line and diagnostic catheter product line) of approximately $10.5 million, or 3.6%. Our cardiovascular sales for 2010 of approximately $287.7 million, compared to 2009 cardiovascular sales of $249.8 million, were up $37.9 million or approximately 15%. This improvement was largely the result of an increase in sales of $22.2 million, or 9.5% of sales, related to our base business (which excludes EN Snare® and embolization devices sales); our acquisition of embolization devices from BioSphere of approximately $9.0 million, or 3.6% of sales; and approximately $6.7 million, or 2.7% of sales, related to the EN Snare® products we acquired from Hatch Medical, L.L.C., a Georgia limited liability company, (“Hatch”) in June of 2009. Our growth in the cardiovascular business segment was favorably affected by increased sales of our base business growth of custom kits and procedure trays of approximately $8.3 million, or 3.3% of base business sales, catheters (particularly our Prelude® sheath product line, micro access catheter product line and new microcatheter product line) of approximately $6.7 million, or 2.7% of base business sales, and our stand-alone devices (particularly our hemostasis valves and stopcocks) of approximately $5.8 million, or 2.3% of base business sales (excludes approximately $6.7 million in EN Snare® sales). Our sales increased during 2011, 2010, and 2009 notwithstanding the fact that the markets for many of our products experienced slight pricing declines as our customers tried to

27


reduce their costs. Substantially all of the increase in our revenues was attributable to increased unit sales. Sales by our European direct sales force are subject to foreign currency exchange rate fluctuations between the natural currency of a foreign country and the U.S. Dollar. Foreign currency exchange rate fluctuations decreased sales by 0.5% in 2011 compared to 2010; decreased sales by 0.3% in 2010 compared to 2009; and decreased sales by 1.0% in 2009 compared to 2008. New products are another source of revenue growth. In 2011, 2010 and 2009, our sales of new products represented 14%, 10%, and 6% of sales, respectively. Included in those sales are revenues from recent acquisitions of 0%, 3% and 3% for 2011, 2010 and 2009, respectively. The third main source of revenue increases came from market share gains in our existing product lines.

Endoscopy Sales. Our endoscopy sales for the year ended December 31, 2011 were approximately $12.0 million, up 33%, when compared to sales in the corresponding period of 2010 of approximately $9.0 million. This increase was due primarily to an increase in sales of approximately $2.4 million of our Aero® Tracheobronchial stent, in large part, accelerated by a competitor's withdrawal from the airway stent market. Our endoscopy sales for 2010 of approximately $9.0 million, when compared to 2009 sales of approximately $7.7 million (sales for 2009 includes only nine and one-half months), were down on an annualized basis, primarily due to the elimination of sales of certain stent procedures and sales force turnover.

International sales for the year ended December 31, 2011 were approximately $125.9 million, or 35% of total sales; international sales for the year ended December 31, 2010 were approximately $95.2 million, or 32% of total sales; international sales in 2009 were approximately $86.4 million, or 34% of total sales. The increase in our international sales during 2011 was primarily related to increased sales in Europe Direct of approximately $9.7 million, up 31%, China sales of approximately $8.1 million, up 66%, EMEA distributor sales of approximately $5.6 million, up 46%, and Pacific Rim sales (excluding China) of approximately $4.8 million, up 21%. The increase in our international sales during 2010 was primarily related to increased sales in China, Japan, Germany and the U.K. The previous increase in 2009 over 2008 primarily resulted from greater acceptance of our products in international markets, continued growth in our European direct sales, and to a lesser degree, increased sales related to improvement in the exchange rate between the Euro and the U.S. Dollar, as discussed above. Our total European direct sales were approximately $39.9 million, $29.7 million, and $26.3 million in 2011, 2010, and 2009, respectively.

Our gross profit as a percentage of sales was 46.0%, 43.3%, and 42.3% in 2011, 2010 and 2009, respectively. The increase in gross profit in 2011 was attributable to an increase in sales of higher-margin BioSphere products of approximately 1.9% of sales and higher prices and unit sales through our distribution system in China of approximately .60% of sales. The improvement in gross profit in 2010 was primarily the result of the addition of higher-margin EN Snare® and embolization devices (offset by $1.7 million in costs related to mark-up on finished goods) acquired from Hatch and BioSphere, respectively. The improved gross profits in 2009 can be attributed primarily to lower average fixed overhead unit costs through increased productivity as fixed costs are shared over an increased number of units and a reduction in material costs. 

Our selling, general and administrative expenses increased approximately $16.9 million, or 19%, in 2011 compared to 2010; approximately $22.8 million, or 35%, in 2010 compared to 2009; and approximately $11.7 million, or 22%, in 2009 compared to 2008. The increase in selling, general and administrative expenses in 2011 was primarily related to the addition of sales and marketing employees, trade shows, commissions and amortization of intangibles relating to the BioSphere acquisition and starting up our Chinese distribution system. The increase in selling, general and administrative expenses in 2010 was largely the result of our acquisition of BioSphere in September 2010 and subsequent integration expenses (including additional sales representatives, marketing support and advertising costs). In connection with the BioSphere acquisition, we had approximately $2.8 million in non-recurring severance costs and approximately $2.5 million in acquisition costs included in selling, general and administrative expenses. The increased selling, general and administrative expenses in 2009 were primarily due to the increased expense associated with our acquisition and operation of the business and assets acquired from Alveolus of approximately $5.7 million and the hiring of additional domestic and international sales representatives. Selling, general and administrative expenses as a percentage of sales was 29.1%, 29.5% (27.8% without non-recurring BioSphere acquisition costs), and 25.2% in 2011, 2010 and 2009, respectively.

Research and development expenses increased by 43.1% to approximately $21.9 million in 2011, compared to approximately $15.3 million in 2010. This increase was primarily related to headcount additions to support various new product launches, regulatory costs for seeking product approvals from the U.S. Food and Drug Administration (the “FDA”) and international regulatory agencies, additional regulatory costs incurred for the start-up of our Hi-Quality clinical trial and the development of several new products for our endoscopy product line. Research and development expenses increased 37% to approximately $15.3 million in 2010, compared to approximately $11.2 million in 2009. The increase in research and development expenses in 2010 was primarily the result of product development initiatives for the endoscopy business segment and embolization devices acquired from BioSphere, as well as related regulatory support. Research and development increased 22% to approximately $11.2 million in 2009, compared to approximately $9.2 million in 2008. The increase in research and development expenses in 2009 related, in large part, to research and development project expenses for the Alveolus business we acquired in March 2009 and to growth in our traditional organic research and development projects, some of which are nearing completion. Our research and development expenses as a percentage of sales were 6.1% for 2011, 5.2% for 2010, and 4.3% for 2009. We have a pipeline of new products

28


and we believe that we have an effective level of capabilities and expertise to continue the flow of new internally-developed products into the future with average gross margins that are higher than our historical gross margins.

During 2011, we incurred in-process research and development charges of approximately $5.8 million related to the purchase of several new product technologies. These technologies included the acquisition of intellectual property for a vena cava filter for $1.0 million, flexible sheath technology for approximately $1.9 million, and support guide catheter technology for $2.0 million. In addition to these acquisitions, we abandoned our Vysera biomaterial technology and our Alveolus covered biliary acquired in-process research and development, resulting in a charge of $500,000 and $400,000, respectively.

Our operating profits by business segment for the years ended December 31, 2011, 2010 and 2009 were as follows (in thousands):

 
2011
 
2010
 
2009
Operating Income (Loss)
 

 
 

 
 

Cardiovascular
$
38,010

 
$
30,176

 
$
35,836

Endoscopy
(4,820
)
 
(12,972
)
 
(2,989
)
Total operating income
$
33,190

 
$
17,204

 
$
32,847


Cardiovascular Operating Income. Our cardiovascular operating income for the year ended December 31, 2011 was approximately $38.0 million, compared to operating income of approximately $30.2 million for the year ended December 31, 2010. This increase was favorably affected by higher sales and gross margins, and was negatively affected by higher selling, general and administrative expenses, research and development expenses and acquired in-process research and development expenses. Our cardiovascular operating income for 2010 was approximately $30.2 million, compared to operating income of approximately $35.8 million for 2009. This decrease in operating income was primarily related to the non-recurring acquisition costs of approximately $6.9 million related to the acquisition of BioSphere.

Endoscopy Operating Loss. Our endoscopy net operating loss from operations for the year ended December 31, 2011 was approximately $4.8 million, compared to an operating loss of approximately $13.0 million for the year ended December 31, 2010. Excluding the abandonment of Vysera biomaterial technology of $500,000 and $400,000 related to our Alveolus covered biliary acquired in-process research and development, our net operating loss for the year ended December 31, 2011 would have been $3.9 million. Excluding a goodwill impairment charge of approximately $8.3 million that we recognized during 2010, our net operating loss for 2010 would have been approximately $4.6 million. Excluding these charges one time charges, the decrease in our 2011 operating loss was favorably affected by higher sales and gross margins, which were partially offset by higher research and development expenses and selling, general and administrative expenses. Our endoscopy net operating loss from operations for 2010 was approximately $13.0 million, compared to an operating loss of approximately $3.0 million for 2009. The increase in loss from operations for 2010 was primarily affected by a goodwill impairment charge of approximately $8.3 million and approximately $2.0 million in additional research and development expenses over 2009. The increase in research and development expense in the endoscopy segment during 2010 was principally the result of our investment in new product development to help move this business segment to profitability. We continue to invest heavily in expanding our product offering in this business segment in an effort to continue to reduce our operating losses.

Our effective income tax rates for the years ended December 31, 2011, 2010 and 2009 were 30%, 26%, and 32%, respectively. The increase in the effective income tax rate for 2011 compared to 2010 is primarily related to the increased profit of our U.S. operations which are taxed at a higher rate than our foreign operations income (primarily our Irish operations). The decrease in the effective income tax rate for 2010 over 2009 was largely due to the fact that our Irish operations, which are taxed at a lower income tax rate than our U.S. and other foreign operations, made up a greater portion of our 2010 consolidated income compared to 2009. The decrease in the tax rate was also due to permanent tax benefits (such as certain tax credits) being applied to a lower pre-tax book income in 2010. The decrease in the effective income tax rate for 2009 over 2008 was primarily related to the profitability of our Irish operations, which are taxed at a lower income tax rate than our U.S. and other foreign operations; research and development tax credits generated from our Irish operations; and investment gains sustained in our deferred compensation that are not deductible for tax purposes. 

Our other income (expense) for the years ended December 2011, 2010, and 2009 was approximately ($315,000), ($416,000), and $247,000, respectively. The decrease in other expenses for 2011 over 2010 was primarily the result of cash balances maintained in China which resulted in increased interest income and foreign exchange gains recognized with the appreciation in the Chinese Yuan, all of which was partially offset by higher interest expenses. The increase in other expenses for 2010 over 2009 was principally the result of interest expense of approximately $451,000 on our long-term debt incurred in connection with the

29


acquisition of BioSphere. The decrease in other income for 2009 over 2008 was primarily the result of a decrease in interest income attributable to lower average cash balances, when compared to 2008. 

Our net income for 2011, 2010, and 2009 was approximately $23.0 million, $12.5 million, and $22.5 million respectively. Our 2011 net income included charges related to acquired in-process research and development of approximately $5.8 million, or approximately $3.6 million net of tax, and an increase in the cost of goods sold related to BioSphere’s mark-up on finished goods of approximately $724,000, or approximately $442,000 net of tax. Excluding these charges, our 2011 net income would have been approximately $27.0 million, compared to net income for 2010 of approximately $22.0 million, adjusted for non-recurring charges related to goodwill impairment of approximately $5.2 million, net of tax and BioSphere acquisition costs including legal, accounting investment banking, severance and stepped-up inventory costs, net of tax of approximately $4.3 million. This increase in net income was primarily related to increased sales volumes, higher gross margins and a lower effective income tax rate, all of which offset higher selling, general and administrative expenses and research and development expenses and acquired in-process research and development expenses. Net income for 2010 was unfavorably affected by the goodwill impairment of approximately $8.3 million, or approximately $5.2 million net of tax, related to our endoscopy reporting unit. In addition, 2010 net income was negatively affected by BioSphere acquisition costs of approximately $2.5 million, or approximately $1.5 million net of tax, BioSphere severance costs of approximately $2.8 million, or approximately $1.7 million net of tax, and BioSphere’s increase in the cost of goods sold related to mark-up on finished goods of approximately $1.7 million, or approximately $1.1 million net of tax. Net income for 2009 was favorably affected by increased sales volumes, higher gross margins and a lower effective income tax rate, all of which offset higher selling, general and administrative expenses and research and development expenses, primarily associated with our acquisition of the Alveolus assets in the first quarter of 2009. 

LIQUIDITY AND CAPITAL RESOURCES

Capital Commitments and Contractual Obligations

The following table summarizes our capital commitments and contractual obligations as of December 31, 2011, as well as the future periods in which such payments are currently anticipated to become due:

 
 
Payment due by period (in thousands)
Contractual Obligations
 
Total
 
Less than 1 Year
 
1-3 Years
 
4-5 Years
 
After 5 Years
Long-term debt
 
$
30,737

 
$

 
$

 
$
30,737

 
$

Interest on long-term debt (1)
 
2,066

 
483

 
1,134

 
449

 

Operating leases
 
19,378

 
3,444

 
7,391

 
2,165

 
6,378

Royalty obligations
 
698

 
100

 
158

 
100

 
340

Total contractual cash
 
$
52,879

 
$
4,027

 
$
8,683

 
$
33,451

 
$
6,718


(1) Interest payments on our variable long-term debt were forecasted using the LIBOR forward curves plus a base of 1.25 percent.

As of December 31, 2011, we had approximately $3.5 million of unrecognized tax positions and $4.6 million of deferred compensation payable that have been recognized as liabilities that have not been included in the contractual obligations table due to uncertainty as to when such amounts may be settled.

Additional information regarding our capital commitments and contractual obligations, including royalty payments, is contained in notes 7, 9 and 13 of the notes to our consolidated financial statements, set forth in Item 8 below.

Cash Flows

At December 31, 2011 and 2010, we had cash and cash equivalents of approximately $10.1 million and $3.7 million respectively, of which $9.0 million and $2.7 million, respectively, were held by foreign subsidiaries. For each of our foreign subsidiaries, we make an assertion as to whether the earnings are intended to be repatriated to the United States or held by the foreign subsidiary for permanent reinvestment. The cash held by our foreign subsidiaries for permanent reinvestment is used to fund the operating activities of our foreign subsidiaries and for further investment in foreign operations. A deferred tax liability has been accrued for the earnings that are available to be repatriated to the United States.

In addition, cash held by our subsidiary in China is subject to local laws and regulations that require government approval for the transfer of such funds to entities located outside of China. As of December 31, 2011 and 2010, we had cash and cash

30


equivalents of approximately $5.9 million and $1.6 million, respectively, held by our subsidiary in China.

Our cash flow from operations was approximately $34.0 million in 2011, a decrease of approximately $745,000 over 2010. Our working capital for the years ended December 31, 2011, 2010 and 2009 was approximately $89.9 million, $72.1 million, and $57.7 million respectively. The increase in working capital for 2011 from 2010 was favorably affected by an increase in our cash and inventory balances. The increase in working capital in 2010 from 2009 was primarily the result of the acquisition of BioSphere’s current assets (primarily inventory and receivables).

During the year ended December 31, 2011 our inventory balances increased approximately $9.3 million, from approximately $60.6 million at December 31, 2010 to approximately $69.9 million at December 31, 2011. The increase in inventory was largely the result of higher inventory levels of approximately $8.2 million attributable to a 13.5% increase in our base business and an increase in raw materials related to maintaining a one-year supply of resins.
During the year ended December 31, 2010, our inventory balances increased approximately $13.4 million, from approximately $47.2 million at December 31, 2009 to approximately $60.6 million at December 31, 2010. The increase in inventory was primarily related to our acquisition of Biosphere’s inventory of approximately $5.7 million, higher inventory levels of approximately $4.3 million attributable to a 9.2% increase in our base business, approximately $2.0 million related to new product launches and approximately $900,000 related to our new Chinese distribution warehouse and in-transit inventory used to support our direct sales efforts in China.
During the year ended December 31, 2009, our inventory balances increased by approximately $8.8 million, from approximately $38.4 million at December 31, 2008 to approximately $47.2 million at December 31, 2009. The increase resulted from a combination of factors, including the following principal elements: an approximate $3.2 million increase in raw materials, work in process and finished goods inventory attributable to the products we acquired from Hydromer, Inc. (“Biosearch”), Hatch and Alveolus; a change in our in-transit finished goods and raw materials inventory shipping practices (from air freight to ocean freight) between our manufacturing facility in Ireland and our distribution facility in The Netherlands, which increased our in-transit finished goods and raw materials inventory levels by four weeks or approximately $1.8 million; higher inventory levels of approximately $3.8 million attributable to a 10% increase in our cardiovascular operating segment; and our management’s decision to increase inventory levels for many of our products in order to improve product delivery time frames.
On September 10, 2010, we entered into the Credit Agreement. As of December 31, 2011, Wells Fargo was the only bank involved in the Credit Agreement. Pursuant to the terms of the Credit Agreement, the Lenders have agreed to make revolving credit loans up to an aggregate principal amount of $125 million. Wells Fargo has also agreed to make swing line loans from time to time through the maturity date of September 10, 2015 in amounts equal to the difference between the amounts actually loaned by the Lenders and the aggregate credit commitment. The Credit Agreement contains covenants, representations and warranties and other terms, that are customary for revolving credit facilities of this nature. In this regard, the Credit Agreement requires us to maintain a leverage ratio, an earnings before interest, taxes, depreciation and amortization (“EBITDA”) ratio, a minimum adjusted consolidated net income, and limits the amount of annual capital expenditures we can incur. Additionally, the Credit Agreement contains various negative covenants with which we must comply, a prohibition on the payment of dividends and limitations respecting: the incurrence of indebtedness, the creation of liens on our property, mergers or similar combinations or liquidations, asset dispositions, investments in subsidiaries, and other provisions customary in similar types of agreements. As of December 31 2011, we were in compliance with all financial covenants set forth in the Credit Agreement.

As of December 31, 2011, we had outstanding borrowings of approximately $30.7 million under the Credit Agreement, with available borrowings of approximately $94.3 million, based on the leverage ratio in the terms of the Credit Agreement. Our interest rate under the Credit Agreement as of December 31, 2011 was a fixed rate of 1.54% on $24.0 million, a fixed rate of 1.55% on $5.0 million and a variable floating rate of 1.84% on approximately $1.7 million. In July 2011, we used $55.0 million of the proceeds from the Equity Offering to pay down the outstanding balance on the Credit Agreement, and we terminated our interest rate swap agreement, which resulted in a cash receipt of and gain of approximately $28,000 upon final settlement.

Capital expenditures for property and equipment were approximately $59.2 million, $23.6 million, and $18.5 million for the years ended December 31, 2011, 2010 and 2009, respectively. During 2011 and 2010, we spent approximately $36.9 million and $2.0 million, respectively, for the construction of buildings and a parking lot as discussed below. We anticipate that we will spend approximately $54 million in 2012 for property and equipment, of which $34 million will be spent on building construction.

On June 22, 2011, we completed the Equity Offering of 5,520,000 shares of Common Stock and received proceeds of approximately $87.7 million, which is net of approximately $4.6 million in underwriting discounts and commissions. In the short term, we used the proceeds of the Equity Offering to pay down amounts owing under our Credit Agreement and reduce interest costs. In the longer term, we intend to use the portion of our Wells Fargo credit facility that was repaid with the proceeds of the

31


Equity Offering to invest in additional capacity and expansion, new products and other business development opportunities. In addition to the proceeds of the Equity Offering, we received approximately $7.2 million in cash related to the exercise of options to acquire approximately 1.1 million shares of common stock and approximately $3.1 million in tax benefits attributable to appreciation of the options exercised during the year ended December 31, 2011.

Historically, we have incurred significant expenses in connection with new facilities, production automation, product development and the introduction of new products. Over the last three years, we spent a substantial amount of cash in connection with our acquisition of certain assets and product lines ($10.3 million to acquire the assets of Ash Access Technology, Inc., and AAT Catheter Technologies, LLC, among other transactions, during 2011, approximately $96.0 million to acquire BioSphere in September 2010, and $46.2 million to acquire the assets of Alveolus and Hatch, among other transactions, during 2009). We are in the process of constructing three new production facilities in South Jordan, Utah, Galway, Ireland, and Pearland, Texas. During 2011, we also finished construction of a parking terrace in South Jordan, Utah. The total anticipated cost of these construction projects is approximately $78 million. As of December 31, 2011, we had incurred total costs of approximately $38.9 million with respect to those construction projects. In the event we pursue and complete significant transactions or acquisitions in the future, additional funds will likely be required to meet our strategic needs, which may require us to raise additional funds in the debt or equity markets. We currently believe that our existing cash balances, anticipated future cash flows from operations, sales of equity, and existing lines of credit and committed debt financing will be adequate to fund our current and currently planned future operations for the next twelve months and the foreseeable future.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Critical Accounting Policies

The SEC has requested that all registrants address their most critical accounting policies. The SEC has indicated that a “critical accounting policy” is one which is both important to the representation of the registrant’s financial condition and results and requires management’s most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain. We base our estimates on past experience and on various other assumptions our management believes to be reasonable under the circumstances, the results of which form the basis for making judgments about carrying values of assets and liabilities that are not readily apparent from other sources. Actual results will differ, and may differ materially from these estimates under different assumptions or conditions. Additionally, changes in accounting estimates could occur in the future from period to period. Our management has discussed the development and selection of our most critical financial estimates with the audit committee of our Board of Directors. The following paragraphs identify our most critical accounting policies:

Inventory Obsolescence. Our management reviews on a quarterly basis inventory quantities on hand for unmarketable and/or slow-moving products that may expire prior to being sold. This review includes quantities on hand for both raw materials and finished goods. Based on this review, we provide adjustments for any slow-moving finished good products or raw materials that we believe will expire prior to being sold or used to produce a finished good and any products that are unmarketable. This review of inventory quantities for unmarketable and/or slow moving products is based on forecasted product demand prior to expiration lives.

Forecasted unit demand is derived from our historical experience of product sales and production raw material usage. If market conditions become less favorable than those projected by our management, additional inventory write-downs may be required. During the years ended December 31, 2011, 2010 and 2009, we recorded obsolescence expense of approximately $1.5 million, $1.9 million and $1.5 million, respectively, and wrote off approximately $1.1 million, $1.1 million and $1.3 million, respectively. Based on this historical trend, we believe that our inventory balances as of December 31, 2011 had been accurately adjusted for any unmarketable and/or slow moving products that may expire prior to being sold.

Allowance for Doubtful Accounts. A majority of our receivables are with hospitals which, over our history, have demonstrated favorable collection rates. Therefore, we have experienced relatively minimal bad debts from hospital customers. In limited circumstances, we have written off bad debts as the result of the termination of our business relationships with foreign distributors. The most significant write-offs over our history have come from U.S. custom procedure tray manufacturers who bundle our products in surgical trays.

We maintain allowances for doubtful accounts relating to estimated losses resulting from the inability of our customers to make required payments. The allowance is based upon historical experience and a review of individual customer balances. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.


32


Stock-Based Compensation. We measure stock-based compensation cost at the grant date based on the value of the award and recognize the cost as an expense over the term of the vesting period. Judgment is required in estimating the fair value of share-based awards granted and their expected forfeiture rate. If actual results differ significantly from these estimates, stock-based compensation expense and our results of operations could be materially impacted.

Income Taxes. Under our accounting policies, we initially recognize a tax position in our financial statements when it becomes more likely than not that the position will be sustained upon examination by the tax authorities. Such tax positions are initially and subsequently measured as the largest amount of tax positions that has a greater than 50% likelihood of being realized upon ultimate settlement with the tax authorities assuming full knowledge of the position and all relevant facts. Although we believe our provisions for unrecognized tax positions are reasonable, we can make no assurance that the final tax outcome of these matters will not be different from that which we have reflected in our income tax provisions and accruals. The tax law is subject to varied interpretations, and we have taken positions related to certain matters where the law is subject to interpretation. Such differences could have a material impact on our income tax provisions and operating results in the period(s) in which we make such determination.

Goodwill and Intangible Assets Impairment and Contingent Consideration. We test our goodwill balances for impairment as of July 1 of each year, or whenever impairment indicators arise. We utilize several reporting units in evaluating goodwill for impairment. We assess the estimated fair value of reporting units based on discounted future cash flows. If the carrying amount of a reporting unit exceeds the fair value of the reporting unit, an impairment charge is recognized in an amount equal to the excess of the carrying amount of the reporting unit goodwill over implied fair value of that goodwill. This analysis requires significant judgments, including estimation of future cash flows and the length of time they will occur, which is based on internal forecasts, and a determination of a discount rate based on our weighted average cost of capital. During our annual test of goodwill balances in 2010, which was completed during the third quarter, we determined that our goodwill related to our endoscopy reporting unit was impaired. We determined that based on estimated future cash flows for this reporting unit, discounted back to their present value using a discount rate that reflects the risk profiles of the underlying activities, the carry value amount of this reporting unit was less than its estimated fair value. Some of the factors that influenced our estimated cash flows were slower sales growth in the products acquired from our Alveolus acquisition in March of 2009, uncertainty regarding acceptance of new products and continued operating losses in our endoscopy business segment. During our annual test of goodwill balances in 2011, which was completed during the third quarter, we determined that the fair value of each reporting unit with goodwill exceeded the carrying amount by at least 40%.

We evaluate the recoverability of intangible assets whenever events or changes in circumstances indicate that its carrying amount may not be recoverable. This analysis requires similar significant judgments as those discussed above regarding goodwill, except that undiscounted cash flows are compared to the carrying amount of intangible assets to determine if impairment exists. All of our intangible assets are subject to amortization.

Contingent consideration is an obligation by the buyer to transfer additional assets or equity interests to the former owner upon reaching certain milestone payments. We have entered into asset purchase agreements which will require us to pay additional purchase consideration upon reaching certain revenue-based milestones and/or future royalties based on a percentage of related product sales. In connection with a business combination, any contingent consideration is recorded on the acquisition date based upon the consideration expected to be transferred in the future. We utilize a probability-weighted discounted cash flow method in valuing the contingent consideration. We re-measure this liability each quarter and record changes in the estimated fair value through operating expense in our consolidated statements of income. Significant increases or decreases could result in the estimated fair value of our contingent consideration liability, as the result of changes in the timing and amount of revenue estimates, as well as changes in the discount rate or periods.

33


Item 7A.  
Quantitative and Qualitative Disclosures About Market Risk.

Our principal market risk relates to changes in the value of the Euro and GBP relative to the value of the U.S. Dollar. We also have a limited market risk relating to the Chinese Yuan, Hong Kong Dollar and the Swedish and Danish Kroner. Our consolidated financial statements are denominated in, and our principal currency is, the U.S. Dollar. For the year ended December 31, 2011, a portion of our revenues (approximately $59.5 million, representing approximately 16.6% of our aggregate revenues), was attributable to sales that were denominated in foreign currencies. All other international sales were denominated in U.S. Dollars. Certain of our expenses for the year ended December 31, 2011 were also denominated in foreign currencies, which partially offset risks associated with fluctuations of exchange rates between foreign currencies on the one hand, and the U.S. Dollar on the other hand. During the year ended December 31, 2011, the exchange rate between our foreign currencies against the U.S. Dollar resulted in an increase in our gross revenues of approximately $1.9 million, or .53%, and a decrease of .15% in gross profit, as result of our increase in Irish manufacturing operation cost which are denominated in Euro.

On November 30, 2011, we forecasted a net exposure for December 31, 2011 (representing the difference between Euro and GBP-denominated receivables and Euro-denominated payables) of approximately 12,000 Euros and 328,000 GBPs. In order to partially offset such risks at November 30, 2011, we entered into a 30-day forward contract for the Euro and GBP with a notional amount of approximately 12,000 Euros and notional amount of 328,000 GBPs. On November 30, 2010, we forecasted a net exposure for December 31, 2010 (representing the difference between Euro and GBP-denominated receivables and Euro-denominated payables) of approximately 658,000 Euros and 222,000 GBPs. In order to partially offset such risks at November 30, 2010, we entered into a 30-day forward contract for the Euro and GBP with a notional amount of approximately 658,000 Euros and notional amount of 222,000 GBPs. We enter into similar transactions at various times during the year to partially offset exchange rate risks we bear throughout the year. These contracts are marked to market at each month-end. During the years ended December 31, 2011, 2010 and 2009, we recorded a net gain on all forward contracts of approximately $221,000, $126,000 and $83,000, respectively, which is included in other income in the accompanying consolidated statements of income. The fair value of our open positions at December 31, 2011 and 2010 was not material.

As discussed in Note 7 to our consolidated financial statements, as of December 31, 2011, we had outstanding borrowings of approximately $30.7 million under the Credit Agreement. Accordingly, our earnings and after-tax cash flow are affected by changes in interest rates. Assuming the current level of borrowings remained the same, it is estimated that our interest expense and income before income taxes would change by approximately $307,000 annually for each one percentage point change in the average interest rate under these borrowings.

In the event of an adverse change in interest rates, our management would likely take actions to mitigate our exposure. However, due to the uncertainty of the actions that would be taken and their possible effects, additional analysis is not possible at this time. Further, such analysis would not consider the effects of the change in the level of overall economic activity that could exist in such an environment.


34


Item 8.
Financial Statements and Supplementary Data.


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
To the Board of Directors and Stockholders of Merit Medical Systems, Inc.:
 
We have audited the accompanying consolidated balance sheets of Merit Medical Systems, Inc. and subsidiaries (the “Company”) as of December 31, 2011 and 2010, and the related consolidated statements of income, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2011. Our audits also included the financial statement schedule listed in the Index at Item 15. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on the financial statements and financial statement schedule based on our audits.
 
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
 
In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2011 and 2010, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2011, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.
 
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of December 31, 2011, based on the criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 29, 2012, expressed an unqualified opinion on the Company’s internal control over financial reporting.
 
/s/ DELOITTE & TOUCHE LLP
 
 
 
Salt Lake City, Utah
 
February 29, 2012
 


35


MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
DECEMBER 31, 2011 AND 2010
(In thousands)

 
2011
 
2010
ASSETS
 

 
 

 
 
 
 
CURRENT ASSETS:
 

 
 

Cash and cash equivalents
$
10,128

 
$
3,735

Trade receivables — net of allowance for uncollectible accounts — 2011 — $464 and 2010 — $593
40,550

 
37,362

Employee receivables
154

 
110

Other receivables
1,750

 
1,242

Inventories
69,911

 
60,597

Prepaid expenses
3,775

 
2,089

Prepaid income taxes
883

 
452

Deferred income tax assets
3,704

 
4,647

Income tax refund receivable
2,797

 
2,067

 
 
 
 
Total current assets
133,652

 
112,301

 
 
 
 
PROPERTY AND EQUIPMENT:
 

 
 

Land and land improvements
16,288

 
12,586

Buildings
59,905

 
50,274

Manufacturing equipment
103,629

 
92,839

Furniture and fixtures
22,559

 
18,313

Leasehold improvements
12,659

 
12,121

Construction-in-progress
47,534

 
13,775

 
 
 
 
Total property and equipment
262,574

 
199,908

 
 
 
 
Less accumulated depreciation
(83,434
)
 
(71,853
)
 
 
 
 
Property and equipment — net
179,140

 
128,055

 
 
 
 
OTHER ASSETS:
 

 
 

Intangible assets:
 
 
 
Developed technology — net of accumulated amortization — 2011 — $4,759 and 2010 — $2,301
35,415

 
34,273

Other — net of accumulated amortization — 2011 — $10,215 and 2010 — $6,695
21,254

 
22,911

Goodwill
61,144

 
58,675

Deferred income tax assets
5,366

 
4,140

Marketable securities
2,798

 

Other assets
8,248

 
9,125

 
 
 
 
Total other assets
134,225

 
129,124

 
 
 
 
TOTAL
$
447,017

 
$
369,480

 
 
 
 
See notes to consolidated financial statements.
 
 
(Continued)


36


MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
DECEMBER 31, 2011 AND 2010
(In thousands)

 
2011
 
2010
LIABILITIES AND STOCKHOLDERS’ EQUITY
 

 
 

 
 
 
 
CURRENT LIABILITIES:
 

 
 

Trade payables
$
22,727

 
$
20,092

Accrued expenses
20,197

 
18,890

Advances from employees
225

 
307

Income taxes payable
646

 
887

 
 
 
 
Total current liabilities
43,795

 
40,176

 
 
 
 
LONG-TERM DEBT
30,737

 
81,538

 
 
 
 
DEFERRED INCOME TAX LIABILITIES
2,112

 
1,267

 
 
 
 
LIABILITIES RELATED TO UNRECOGNIZED TAX BENEFITS
3,489

 
3,527

 
 
 
 
DEFERRED COMPENSATION PAYABLE
4,585

 
4,258

 
 
 
 
DEFERRED CREDITS
1,984

 
1,763

 
 
 
 
OTHER LONG-TERM OBLIGATIONS
3,226

 
1,336

 
 
 
 
Total liabilities
89,928

 
133,865

 
 
 
 
COMMITMENTS AND CONTINGENCIES (Notes 2, 7, 8, 9 and 13)


 


 
 
 
 
STOCKHOLDERS’ EQUITY:
 

 
 

Preferred stock — 5,000 shares authorized as of December 31, 2011 and 2010; no shares issued


 


Common stock, no par value; shares authorized — 2011 and 2010 - 100,000; issued and outstanding as of December 31, 2011 - 42,008 and December 31, 2010 - 35,496
166,231

 
67,091

Retained earnings
190,708

 
167,664

Accumulated other comprehensive income
150

 
860

 
 
 
 
Total stockholders’ equity
357,089

 
235,615

 
 
 
 
TOTAL
$
447,017

 
$
369,480

 
 
 
 
See notes to consolidated financial statements.
 
 
(Concluded)



37


MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF INCOME
YEARS ENDED DECEMBER 31, 2011, 2010 AND 2009
(In thousands, except per share amounts)

 
2011
 
2010
 
2009
NET SALES
$
359,449

 
$
296,755

 
$
257,462

 
 
 
 
 
 
COST OF SALES
193,981

 
168,257

 
148,660

 
 
 
 
 
 
GROSS PROFIT
165,468

 
128,498

 
108,802

 
 
 
 
 
 
OPERATING EXPENSES:
 

 
 

 
 

Selling, general, and administrative
104,502

 
87,615

 
64,787

Research and development
21,938

 
15,335

 
11,168

Acquired in-process research and development
5,838

 

 

Goodwill impairment charge

 
8,344

 

 
 
 
 
 
 
Total operating expenses
132,278

 
111,294

 
75,955

 
 
 
 
 
 
INCOME FROM OPERATIONS
33,190

 
17,204

 
32,847

 
 
 
 
 
 
OTHER INCOME (EXPENSE):
 

 
 

 
 

Interest income
129

 
34

 
178

Interest expense
(789
)
 
(596
)
 
(28
)
Other income
345

 
146

 
97

 
 
 
 
 
 
Other income (expense) — net
(315
)
 
(416
)
 
247

 
 
 
 
 
 
INCOME BEFORE INCOME TAXES
32,875

 
16,788

 
33,094

 
 
 
 
 
 
INCOME TAX EXPENSE
9,831

 
4,328

 
10,564

 
 
 
 
 
 
NET INCOME
$
23,044

 
$
12,460

 
$
22,530

 
 
 
 
 
 
EARNINGS PER COMMON SHARE:
 

 
 

 
 

Basic
$
0.59

 
$
0.35

 
$
0.64

 
 
 
 
 
 
Diluted
$
0.58

 
$
0.35

 
$
0.63

 
 
 
 
 
 
AVERAGE COMMON SHARES:
 
 
 

 
 

Basic
39,086

 
35,290

 
35,014

 
 
 
 
 
 
Diluted
39,733

 
35,976

 
35,758

 
See notes to consolidated financial statements.

38


MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
YEARS ENDED DECEMBER 31, 2011, 2010 AND 2009
(In thousands)
 
 
 
 
 
 
 
 
 
Accumulated Other
 
 
 
Common Stock
 
Retained
 
Comprehensive
 
Total
 
Shares
 
Amount
 
Earnings
 
Income (Loss)
BALANCE — January 1, 2009
$
194,305

 
35,116

 
$
61,689

 
$
132,674

 
$
(58
)
 
 
 
 
 
 
 
 
 
 
Comprehensive income:
 

 
 

 
 

 
 

 
 

Net income
22,530

 
 

 
 

 
22,530

 
 

Foreign currency translation adjustment
(27
)
 
 

 
 

 
 

 
(27
)
Total comprehensive income
22,503

 
 

 
 

 
 

 
 

 
 
 
 
 
 
 
 
 
 
Tax benefit attributable to appreciation of common stock options exercised
987

 
 

 
987

 
 

 
 

Stock-based compensation expense
1,182

 
 

 
1,182

 
 

 
 

Issuance of common stock under Employee Stock Purchase Plans
353

 
30

 
353

 
 

 
 

Warrants exercised
517

 
64

 
517

 
 

 
 

Options exercised
1,920

 
385

 
1,920

 
 

 
 

Stock repurchased and retired
(2,474
)
 
(313
)
 
(2,474
)
 
 

 
 

Shares surrendered in exchange for payment of payroll tax liabilities
(254
)
 
(29
)
 
(254
)
 
 

 
 

Shares surrendered in exchange for the exercise of stock options
(230
)
 
(27
)
 
(230
)
 
 

 
 

 
 
 
 
 
 
 
 
 
 
BALANCE — December 31, 2009
$
218,809

 
35,226

 
$
63,690

 
$
155,204

 
$
(85
)
 


 
 
 
 
 
 
 
 
Comprehensive income:
 
 
 
 
 
 
 
 
 
Net income
12,460

 
 

 
 

 
12,460

 
 

Interest rate swap, net of tax of $451
708

 
 

 
 

 
 

 
708

Foreign currency translation adjustment
237

 
 

 
 

 
 

 
237

Total comprehensive income
13,405

 
 

 
 

 
 

 
 

 
 
 
 
 
 
 
 
 
 
Tax benefit attributable to appreciation of common stock options exercised
399

 
 

 
399

 
 

 
 

Stock-based compensation expense
1,294

 
 

 
1,294

 
 

 
 

Issuance of common stock under Employee Stock Purchase Plans
378

 
31

 
378

 
 

 
 

Options exercised
1,330

 
239

 
1,330

 
 

 
 

 
 
 
 
 
 
 
 
 
 
BALANCE — December 31, 2010
$
235,615

 
35,496

 
$
67,091

 
$
167,664

 
$
860

 
 
 
 
 
 
 
 
 
 
Comprehensive income:
 

 
 

 
 

 
 

 
 

Net income
23,044

 
 

 
 

 
23,044

 
 

Interest rate swap, net of tax of $451
(708
)
 
 

 
 

 
 

 
(708
)
Unrealized gain on marketable securities, net of tax of $115
180

 
 
 
 
 
 
 
180

Foreign currency translation adjustment
(182
)
 
 
 
 

 
 

 
(182
)
Total comprehensive income
22,334

 
 

 
 

 
 

 
 

 


 
 
 
 
 
 
 
 
Tax benefit attributable to appreciation of common stock options exercised
3,122

 
 

 
3,122

 
 

 
 

Stock-based compensation expense
1,644

 
 

 
1,644

 
 

 
 

Issuance of common stock, net of offering costs
87,700

 
5,520

 
87,700

 
 
 
 
Options exercised
8,449

 
1,099

 
8,449

 
 
 
 
Issuance of common stock under Employee Stock Purchase Plans
430

 
31

 
430

 
 

 
 

Shares surrendered in exchange for payment of payroll tax liabilities
(953
)
 
(60
)
 
(953
)
 
 
 
 
Shares surrendered in exchange for exercise of stock options
(1,252
)
 
(78
)
 
(1,252
)
 
 

 
 

 
 
 
 
 
 
 
 
 
 
BALANCE — December 31, 2011
$
357,089

 
42,008

 
$
166,231

 
$
190,708

 
$
150

 
 
 
 
 
 
 
 
 
 
See notes to consolidated financial statements.

39


MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
YEARS ENDED DECEMBER 31, 2011, 2010 AND 2009
(In thousands)

 
2011
 
2010
 
2009
CASH FLOWS FROM OPERATING ACTIVITIES:
 

 
 

 
 

Net income
$
23,044

 
$
12,460

 
$
22,530

 
 
 
 
 
 
Adjustments to reconcile net income to net cash provided by operating activities:
 

 
 

 
 

Depreciation and amortization
19,194

 
14,856

 
12,271

Losses on sales and/or abandonment of property and equipment
31

 
533

 
271

Write-off of patents and license agreement
103

 
134

 
154

Goodwill impairment charge

 
8,344

 

Acquired in-process research and development
5,838

 

 

Amortization of deferred credits
(106
)
 
(111
)
 
(120
)
Purchase of trading investments

 
(644
)
 
(458
)
Unrealized gains on trading investments

 
(382
)
 
(561
)
Deferred income taxes
1,677

 
(554
)
 
1,791

Tax benefit attributable to appreciation of common stock options exercised
(3,122
)
 
(399
)
 
(987
)
Stock-based compensation expense
1,644

 
1,294

 
1,182

Changes in operating assets and liabilities, net of effects from acquisitions:


 
 

 
 

Trade receivables
(3,323
)
 
(2,088
)
 
(2,131
)
Employee receivables
(62
)
 
29

 
(16
)
Other receivables
(245
)
 
223

 
(13
)
Inventories
(9,314
)
 
(7,614
)
 
(6,882
)
Prepaid expenses
(1,726
)
 
(192
)
 
(571
)
Prepaid income taxes
(431
)
 
(60
)
 

Income tax refund receivable
(733
)
 
(1,573
)
 
319

Other assets
(283
)
 
(43
)
 
(568
)
Trade payables
(2,129
)
 
5,643

 
296

Accrued expenses
1,334

 
3,090

 
1,628

Advances from employees
(65
)
 
99

 

Income taxes payable
2,658

 
1,037

 
825

Liabilities related to unrecognized tax benefits
(226
)
 
(372
)
 
114

Deferred compensation payable
327

 
876

 
1,034

Other long-term obligations
(70
)
 
174

 
(38
)
 
 
 
 
 
 
Total adjustments
10,971

 
22,300

 
7,540

 
 
 
 
 
 
Net cash provided by operating activities
34,015

 
34,760

 
30,070

 
 
 
 
 
 
CASH FLOWS FROM INVESTING ACTIVITIES:
 

 
 

 
 

Capital expenditures for:
 

 
 

 
 

Property and equipment
(59,195
)
 
(23,648
)
 
(18,478
)
Patents and trademarks
(2,077
)
 
(1,083
)
 
(1,191
)
Purchase of marketable securities
(2,503
)
 

 

Proceeds from the sale of marketable securities

 
9,673

 

Proceeds from the sale of property and equipment
5

 
17

 
27

Cash paid in acquisitions, net of cash acquired
(10,250
)
 
(97,785
)
 
(46,150
)
 
 
 
 
 
 
Net cash used in investing activities
(74,020
)
 
(112,826
)
 
(65,792
)
 
 
 
 
 
 
See notes to consolidated financial statements.
 
 
 
 
(Continued)


40


MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
YEARS ENDED DECEMBER 31, 2011, 2010 AND 2009
(In thousands)

 
2011
 
2010
 
2009
CASH FLOWS FROM FINANCING ACTIVITIES:
 

 
 

 
 

Proceeds from issuance of common stock
$
95,454

 
$
1,708

 
$
2,560

Payment of offering costs related to issuance of common stock
(127
)
 

 

Proceeds from issuance of long-term debt
104,585

 
108,491

 

Payments on long-term debt
(155,386
)
 
(26,953
)
 

Borrowings on line of credit

 
1,500

 
19,000

Payments on line of credit

 
(8,500
)
 
(12,000
)
Excess tax benefits from stock-based compensation
3,122

 
399

 
987

Long-term debt issuance costs

 
(522
)
 

Payment of taxes related to an exchange of common stock
(953
)
 

 
(254
)
Common stock repurchased and retired

 

 
(2,474
)
 
 
 
 
 
 
Net cash provided by financing activities
46,695

 
76,123

 
7,819

 
 
 
 
 
 
EFFECT OF EXCHANGE RATES ON CASH
(297
)
 
(455
)
 
6

 
 
 
 
 
 
NET INCREASE (DECREASE) IN CASH AND CASH EQUIVALENTS
6,393

 
(2,398
)
 
(27,897
)
 
 
 
 
 
 
CASH AND CASH EQUIVALENTS:
 

 
 

 
 

Beginning of year
3,735

 
6,133

 
34,030

 
 
 
 
 
 
End of year
$
10,128

 
$
3,735

 
$
6,133

 
 
 
 
 
 
SUPPLEMENTAL DISCLOSURES OF CASH FLOW INFORMATION
 
 
 
 
 
Cash paid during the year for:
 
 
 
 
 
Interest (net of capitalized interest of $299, $13 and $0, respectively)
$
509

 
$
512

 
$
26

 
 
 
 
 
 
Income taxes
$
7,023

 
$
6,050

 
$
8,215

 
 
 
 
 
 
SUPPLEMENTAL DISCLOSURES OF NON-CASH INVESTING AND FINANCING ACTIVITIES
 

 
 

 
 

Property and equipment purchases in accounts payable
$
8,849

 
$
3,778

 
$
2,724

 
 
 
 
 
 
Acquisition purchases in other long term obligations
$
1,270

 
$
250

 
$

 
 
 
 
 
 
Merit common stock surrendered (78, 0 and 27 shares, respectively) in exchange for exercise of stock options
$
1,252

 
$

 
$
230

 
 
 
 
 
 
See notes to consolidated financial statements.
 
 
 
 
(Concluded)



41


MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
YEARS ENDED DECEMBER 31, 2011, 2010 and 2009
 
1.    ORGANIZATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Organization. Merit Medical Systems, Inc. (“Merit,” “we” or “us,”) designs, develops, manufactures and markets single-use medical products for interventional and diagnostic procedures. For financial reporting purposes, we report our operations in two operating segments: cardiovascular and endoscopy. Our cardiovascular segment consists of cardiology and radiology devices which assist in diagnosing and treating coronary arterial disease, peripheral vascular disease and other non-vascular diseases and includes the embolotherapeutic products we acquired through our acquisition of BioSphere Medical, Inc. (“BioSphere”) as described in Note 2 below. Our endoscopy segment consists of gastroenterology and pulmonology medical devices which assist in the palliative treatment of expanding esophageal, tracheobronchial and biliary strictures caused by malignant tumors.

We manufacture our products in plants located in the United States, The Netherlands, Ireland and France. We export sales to dealers and have direct sales forces in the United States, Western Europe and China (see Note 12). Our consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America. The following is a summary of the more significant of such policies.

Use of Estimates in Preparing Financial Statements. The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Principles of Consolidation. The consolidated financial statements include our wholly-owned subsidiaries. Intercompany balances and transactions have been eliminated.

Cash and Cash Equivalents. For purposes of the statements of cash flows, we consider interest bearing deposits with an original maturity date of three months or less to be cash equivalents.

Receivables. The allowance for uncollectible accounts receivable is based on our historical bad debt experience and on management’s evaluation of our ability to collect individual outstanding balances.

Inventories. We value our inventories at the lower of cost, determined on a first-in, first-out method, or market value.  Market value for raw materials is based on replacement costs. Inventory costs include material, labor and manufacturing overhead.  We review inventories on hand at least quarterly and record provisions for estimated excess, slow moving and obsolete inventory, as well as inventory with a carrying value in excess of net realizable value. The regular and systematic inventory valuation reviews include a current assessment of future product demand, historical experience and product expiration.

Goodwill and Intangible Assets. We test goodwill balances as of July 1 for impairment on an annual basis during the third quarter, or whenever impairment indicators arise. We utilize several reporting units in evaluating goodwill for impairment. We assess the estimated fair value of reporting units based on discounted future cash flows. If the carrying amount of a reporting unit exceeds the fair value of the reporting unit, an impairment charge is recognized in an amount equal to the excess of the carrying amount of the reporting unit goodwill over the implied fair value of that goodwill.

We evaluate the recoverability of intangible assets periodically and take into account events or circumstances that warrant revised estimates of useful lives or that indicate that impairment exists. All of our intangible assets are subject to amortization. Intangible assets are amortized on a straight-line basis, except for customer lists, which are generally amortized on an accelerated basis, over the following useful lives:


42


Customer lists
5
-
15 years
Developed technology
5
-
15 years
Distribution agreements
5
-
11 years
License agreements and trademarks
5
-
15 years
Covenant not to compete
3
-
10 years
Patents
17 years
Royalty agreements
5 years

Long-Lived Assets. We periodically review the carrying amount of our long-lived assets for impairment. An asset is considered impaired when estimated future cash flows are less than the carrying amount of the asset. In the event the carrying amount of such asset is not considered recoverable, the asset is adjusted to its fair value. Fair value is generally determined based on discounted future cash flow. There were no impairments of long-lived assets during the years ended December 31, 2011, 2010 and 2009.

Property and Equipment. Property and equipment is stated at the historical cost of construction or purchase. Construction costs include interest costs capitalized during construction. Maintenance and repairs of property and equipment are charged to operations as incurred. Leasehold improvements are amortized over the lesser of the base term of the lease or estimated life of the leasehold improvements. Construction-in-process consists of new buildings and various production equipment being constructed internally and externally. Assets in construction-in-process will commence depreciating once the asset has been placed in service. Depreciation is computed using the straight-line method over estimated useful lives as follows:

Buildings
40 years
Manufacturing equipment
4
-
20 years
Furniture and fixtures
3
-
10 years
Land improvements
10
-
20 years
Leasehold improvements
4
-
25 years

Depreciation expense related to property and equipment for the years ended December 31, 2011, 2010 and 2009 was approximately $13.2 million, $11.4 million, and $10.0 million, respectively.

Deferred Compensation. We have a deferred compensation plan that permits certain management employees to defer a portion of their salary until the future. We established a Rabbi trust to finance obligations under the plan with corporate-owned variable life insurance contracts. The cash surrender value totaled approximately $4.8 million and $4.3 million at December 31, 2011 and 2010, respectively, which is included in other assets in our consolidated balance sheets. We have recorded a deferred compensation payable of approximately $4.6 million and $4.3 million at December 31, 2011 and 2010, respectively, to reflect the liability to our employees under this plan.

Marketable Securities. Marketable securities consist entirely of available-for-sale equity securities. As of December 31, 2011, these equity securities had a cost basis of approximately $2.5 million, fair value of approximately $2.8 million, and gross unrealized gains that are included in accumulated other comprehensive income of approximately $295,000. There were no gross unrealized losses as of December 31, 2011.

Other Assets. As of December 31, 2011, other assets consisted of our deferred compensation plan cash surrender value discussed above, an investment in a privately-held company accounted for at cost, deposits related to various leases, unamortized debt issuance costs and a long-term income tax refund receivable. As of December 31, 2010, other assets also included the fair value of an interest rate swap.

Deferred Credits. Deferred credits consist of grant money received from the Irish government. Grant money is received for a percentage of expenditures on eligible property and equipment, specific research and development projects and costs of hiring and training employees. Amounts related to the acquisition of property and equipment are amortized as a reduction of depreciation expense over the lives of the corresponding property and equipment.

Revenue Recognition. We sell our single-use disposable medical products through a direct sales force in the U.S., through OEM relationships, custom procedure tray manufacturers and a combination of direct sales force and independent distributors in international markets. Revenues from these customers are recognized when all of the following have occurred: (i) persuasive

43


evidence of an arrangement exists, (ii) delivery has occurred or services have been rendered, (iii) the price is fixed or determinable and (iv) the ability to collect is reasonably assured. These criteria are generally satisfied at the time of shipment when risk of loss and title passes to the customer. We have certain written agreements with group purchasing organizations to sell our products to participating hospitals. These agreements have destination shipping terms which require us to defer the recognition of a sale until the product has arrived at the participating hospitals. We reserve for sales returns of defective products (i.e. warranty liability) as a reduction in revenue, based on our historical experience. We also offer sales rebates and discounts to purchasing groups. These reserves are recorded as a reduction in revenue and are not considered material to our consolidated statements of income for the years ended December 31, 2011, 2010 and 2009. In addition, we invoice our customers for taxes assessed by governmental authorities such as sales tax and value added taxes. We present these taxes on a net basis.

Shipping and Handling. We bill our customers for shipping and handling charges, which are included in total revenues for the applicable period and the corresponding shipping and handling expense is reported in cost of goods sold.

Cost of Sales. We include product costs (i.e. material, direct labor and overhead costs), shipping and handling expense, product royalty expense, developed technology expense, production-related depreciation expense and product license agreement expense in cost of goods sold.

Research and Development. Research and development costs are expensed as incurred.

Income Taxes. We utilize an asset and liability approach for financial accounting and reporting for income taxes. Deferred income taxes are provided for temporary differences in the basis of assets and liabilities as reported for financial statement and income tax purposes. Deferred income taxes reflect the tax effects of net operating loss and tax credit carryovers and temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Realization of certain deferred tax assets is dependent upon future earnings, if any. We make estimates and judgments in determining the need for a provision for income taxes, including the estimation of our taxable income for each full fiscal year.

Earnings per Common Share. Net income per common share is computed by both the basic method, which uses the weighted average number of our common shares outstanding and the diluted method, which includes the dilutive common shares from stock options and warrants, as calculated using the treasury stock method.

Fair Value Measurements. The fair value of a financial instrument is the amount that could be received upon the sale of an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Financial assets are marked to bid prices and financial liabilities are marked to offer prices. Fair value measurements do not include transaction costs. A fair value hierarchy is used to prioritize the quality and reliability of the information used to determine fair values. Categorization within the fair value hierarchy is based on the lowest level of input that is significant to the fair value measurement. The fair value hierarchy is defined into the following three categories:

Level 1: Quoted market prices in active markets for identical assets or liabilities.
Level 2: Observable market-based inputs or inputs that are corroborated by market data.
Level 3: Unobservable inputs that are not corroborated by market data.

Stock-Based Compensation. We recognize the fair value compensation cost relating to share-based payment transactions in accordance with Accounting Standards Codification (“ASC”) 718, Compensation — Stock Compensation. Under the provisions of ASC 718, share-based compensation cost is measured at the grant date, based on the fair value of the award and is recognized over the employee’s requisite service period, which is generally the vesting period. The fair value of our stock options is estimated using a Black-Scholes option valuation model. Stock-based compensation expense for the years ended December 31, 2011, 2010 and 2009 was approximately $1.6 million, $1.3 million and $1.2 million, respectively.

Concentration of Credit Risk. Financial instruments that potentially subject us to concentrations of credit risk consist primarily of cash and cash equivalents and accounts receivable. We provide credit, in the normal course of business, primarily to hospitals and independent third-party custom procedure tray manufacturers and distributors. We perform ongoing credit evaluations of our customers and maintain allowances for potential credit losses. Sales to our single largest customer approximated 4%, 4% and 6% of total sales for the years ended December 31, 2011, 2010 and 2009, respectively.

Foreign Currency. The financial statements of our foreign subsidiaries are measured using local currencies as the functional currency, with the exception of Ireland which uses the U.S. Dollar as its functional currency. Assets and liabilities are translated into U.S. Dollars at year-end rates of exchange and results of operations are translated at average rates for the year. Gains and losses resulting from these translations are included in accumulated other comprehensive loss as a separate component of stockholders’ equity. Foreign currency transactions denominated in a currency other than the entity’s functional currency are

44


included in determining net income for the period.  Such foreign currency transaction gains and losses have not been significant for purposes of our financial reporting.

Derivatives. We use forward contracts to mitigate our exposure to volatility in foreign exchange rates, and we used an interest rate swap to hedge changes in the benchmark interest rate related to our Credit Agreement described in Note 7 below. All derivatives are recognized in the consolidated balance sheets at fair value. Classification of each hedging instrument is based upon whether the maturity of the instrument is less than or greater than 12 months.  We do not purchase or hold derivative financial instruments for speculative or trading purposes.  See Note 8.

Accumulated Other Comprehensive Income (Loss). As of December 31, 2011, accumulated other comprehensive income (loss) included approximately $180,000 (net of tax of $115,000) related to unrealized gains on marketable securities and $(30,000) related to foreign currency translation. As of December 31, 2010, accumulated other comprehensive income included approximately $708,000 (net of tax of $451,000) related to an interest rate swap and $152,000 related to foreign currency translation.

Recently Issued Financial Accounting Standards. In September 2011, the Financial Accounting Standards Board (“FASB”) issued authoritative guidance related to testing goodwill for impairment. This guidance provides that entities may first assess qualitative factors to determine whether it is necessary to perform the two-step goodwill impairment test. If the qualitative assessment results in a more than 50% likely result that the fair value of a reporting unit is less than the carrying amount, then the entity must continue to apply the two-step impairment test. If the entity concludes the fair value exceeds the carrying amount, then neither of the two steps in the goodwill impairment test is required. This guidance is effective for annual and interim goodwill impairment tests performed for fiscal years beginning after December 15, 2011 with early adoption permitted. We are currently evaluating the impact of adopting this guidance on our consolidated financial statements.

In June 2011, the FASB issued authoritative guidance on the presentation of comprehensive income. This guidance specifies that an entity has the option to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In both choices, an entity is required to present each component of net income along with total net income, each component of other comprehensive income along with a total for other comprehensive income, and a total amount for comprehensive income. This guidance does not change the items that must be reported in other comprehensive income or when an item of other comprehensive income must be reclassified to net income. It also does not change the presentation of related tax effects, before related tax effects, or the portrayal or calculation of earnings per share. This guidance is to be applied retrospectively and is effective for fiscal years, and interim periods within those years, beginning after December 15, 2011. We are currently evaluating the impact of adopting this guidance on our consolidated financial statements.

In December 2010, the FASB issued authoritative guidance which modifies the requirements of step one of the goodwill impairment test for reporting units with zero or negative carrying amounts. This guidance modifies step one so that for those reporting units, an entity is required to perform step two of the goodwill impairment test if it is more likely than not that a goodwill impairment exists. In determining whether it is more likely than not that a goodwill impairment exists, an entity should consider whether there are any adverse qualitative factors indicating that an impairment may exist. We adopted this guidance during the year ended December 31, 2011, the adoption of which did not have a material effect on our consolidated financial statements.

In October 2009, the FASB issued authoritative guidance that addresses whether multiple deliverables exist, how the deliverables should be separated and how the consideration should be allocated to one or more units of accounting. This guidance establishes a selling price hierarchy for determining the selling price of a deliverable. The selling price used for each deliverable will be based on vendor-specific objective evidence, if available, third-party evidence if vendor-specific objective evidence is not available, or estimated selling price if neither vendor-specific nor third-party evidence is available. We adopted this guidance prospectively for revenue arrangements entered into or materially modified after January 1, 2011, the adoption of which did not have a material effect on our consolidated financial statements.

2.    ACQUISITIONS

On September 2, 2011, we entered into an Asset Purchase Agreement with Ash Access Technology, Inc. (“Ash Access”), an Indiana corporation, and AAT Catheter Technologies, LLC (“AAT”), an Indiana limited liability corporation (collectively “Ash”), to purchase intellectual property rights with respect to various dialysis catheters. We made an initial payment of $5.0 million to Ash in September 2011. We are obligated to pay an additional $1.0 million upon reaching a certain milestone set forth in the purchase agreement and future royalties based on a percentage of related product sales. We accounted for this acquisition as a business combination. The acquisition-date fair value of these contingent liabilities has been included as part of the purchase consideration. Acquisition-related costs during the year ended December 31, 2011, respectively, which are included in selling, general and administrative expense in the accompanying consolidated statements of operations, were not material. During the year

45


ended December 31, 2011, sales subsequent to the acquisition date related to our dialysis catheter acquired were not material. The purchase price was preliminarily allocated as follows (in thousands):
Assets Acquired
 
  Property and equipment
$
73

  Intangibles
 
    Developed technology
3,200

    Customer lists
300

Goodwill
2,697

Total assets acquired
6,270

 
 
Liabilities Assumed
 
  Contingent liabilities
1,270

 
 
Net assets acquired
$
5,000


With respect to the assets we acquired from Ash, we intend to amortize developed technology over 15 years and customer lists on an accelerated basis over two years. The total weighted-average amortization period for these acquired intangible assets is nine years. The assets and liabilities related to this acquisition are included in our cardiovascular segment.

Pro forma consolidated financial results for the Ash acquisition discussed above have not been included in our consolidated financial results because we believe their effects would not be material.

On June 20, 2011, we acquired the intellectual property rights to certain vena cava filter technology. We made an initial payment of $1.0 million in June 2011, and we are obligated to pay up to an additional $3.5 million if certain milestones set forth in the agreement are reached related to further research and development activities and regulatory approval of the vena cava filter.

On July 18, 2011, we acquired the intellectual property rights to certain introducer sheath technology. We made an initial payment of $1.0 million in July 2011, and we are obligated to pay an additional $1.0 million upon the earlier of the commercialization of the product or the third anniversary of the effective date of the agreement. The discounted liability of $948,000 has been reflected in our consolidated balance sheets as a long-term liability as of December 31, 2011.

On December 15, 2011, we acquired the intellectual property rights to certain support guide catheter technology. We made an initial payment of $2.0 million in December 2011, and we are obligated to pay up to an additional $3.0 million if certain obligations and milestones set forth in the agreement are performed or reached related to further research and development activities and regulatory approval of the support guide catheter.

Each of these three transactions discussed above represented an asset acquisition related to a research and development project and a not business combinations. A total charge of approximately $4.9 million related to these acquired in-process research and development assets has been included in the accompanying consolidated statements of operations for the year ended December 31, 2011, since technological feasibility of the underlying research and development projects had not yet been reached and such technology had no future alternative use.

On September 10, 2010, we completed our acquisition of BioSphere in an all-cash merger transaction valued at approximately $95.7 million, inclusive of all common equity and Series A Preferred preferences. BioSphere develops and markets embolotherapeutic products for the treatment of uterine fibroids, hypervascularized tumors and arteriovenous malformations. We believe the acquisition of BioSphere gives us a platform technology applicable to multiple therapeutic areas with significant market potential while leveraging existing interventional radiology call points. The gross amount of trade receivables we acquired from BioSphere was approximately $4.6 million, of which $51,000 was expected to be uncollectible. Our consolidated financial statements for the year ended December 31, 2010 reflect sales subsequent to the acquisition date of approximately $9.0 million related to our BioSphere acquisition. We report sales and operating expenses related to the BioSphere acquisition in our cardiovascular segment. It is not practical to separately report the earnings related to the BioSphere acquisition, as we cannot split out sales costs related to Biosphere’s products, principally because our sales representatives are selling multiple products (including BioSphere products) in the cardiovascular business segment. As of December 31, 2010, the BioSphere purchase price was allocated as follows (in thousands):


46


Assets Acquired
 

Marketable securities
$
9,673

Trade receivables
4,529

Inventories
5,694

Other assets
1,340

Property and equipment
546

Deferred income tax assets
16,012

Intangibles
 

Developed technology
19,000

Customer list
7,900

License agreement
380

Trademark
3,200

Goodwill
34,016

Total assets acquired
102,290

 
 

Liabilities Assumed
 

Accounts payable
322

Accrued expenses
3,617

Deferred income tax liabilities
729

Liabilities related to unrecognized tax benefits
961

Other liabilities
936

Total liabilities assumed
6,565

 
 

Net assets acquired, net of cash acquired of $274
$
95,725


During the year ended December 31, 2011, the goodwill related to the BioSphere acquisition was decreased by approximately $228,000. The change was primarily due to BioSphere tax adjustments including items related to the BioSphere 2010 income tax return, which was finalized during the third quarter of 2011.

With respect to the BioSphere assets, we intend to amortize developed technology over 15 years, a license agreement over 10 years and customer lists on an accelerated basis over 10 years. While U.S. trademarks can be renewed indefinitely, we currently estimate that we will generate cash flow from the acquired trademarks for a period of 15 years from the acquisition date. The total weighted-average amortization period for these acquired intangible assets is 13.6 years.

In connection with our BioSphere acquisition, we paid approximately $522,000 in long-term debt issuance costs to Wells Fargo Bank for our long-term debt (see Note 7). These costs consist primarily of loan origination fees and legal costs that we intend to amortize over five years, which is the contract term of our unsecured Credit Agreement, dated September 10, 2010 with Lenders who are or may become party thereto and Wells Fargo, as administrative agent for the Lenders. We also incurred approximately $86,000 and $2.5 million of acquisition-related costs during the years ended December 31, 2011 and 2010, respectively, which are included in selling, general and administrative expense in the accompanying consolidated statements of operations.

During the fourth quarter of 2010, we terminated several exclusive BioSphere sales distributor agreements in European countries where we already had previously established direct sales relationships. In connection with the termination of these agreements, we agreed to purchase customer lists from the terminated distributors. The total purchase price of the customer lists was approximately $1.3 million and was allocated to customer lists. We intend to amortize the customer lists on an accelerated basis over 10 years.

On February 19, 2010, we entered into a manufacturing and technology license agreement with a medical device manufacturer for certain medical products. We made an initial payment of $250,000 in February 2010, a second payment of $250,000 in May 2010, a third payment of $250,000 in November 2010 and a final payment of $250,000 in August 2011. We have included the $1.0 million intangible asset in developed technology and intend to amortize the asset over an estimated life of 10 years.


47


The following table summarizes our consolidated results of operations for the years ended December 31, 2010 and 2009, as well as the pro forma consolidated results of operations as though the BioSphere acquisition had occurred on January 1, 2009 (in thousands, except per share amounts):

 
Year Ended
December 31, 2010
 
Year Ended
December 31, 2009
 
As Reported
 
Pro Forma
 
As Reported
 
Pro Forma
Sales
$
296,755

 
$
317,382

 
$
257,462

 
$
288,589

Net income
12,460

 
7,258

 
22,530

 
17,000

Earnings per common share:
 

 
 

 
 

 
 

Basic
$
0.35

 
$
0.21

 
$
0.64

 
$
0.49

Diluted
$
0.35

 
$
0.20

 
$
0.63

 
$
0.48


The unaudited pro forma information set forth above is for informational purposes only and should not be considered indicative of actual results that would have been achieved if BioSphere had been acquired the beginning of 2009, or results that may be obtained in any future period.

On October 21, 2009, we entered into an Exclusive License, Development and Supply Agreement with Vysera Biomedical Limited (“Vysera”), pursuant to which Vysera granted to us an exclusive license to use, modify and sell certain valve technology and biomaterial coating technology for medical devices (the “Licensed Technology”) and other intellectual property associated with the Licensed Technology and to develop and market improvements to the Licensed Technology. In the transaction, we also purchased 253,047 A Ordinary Shares of Vysera, for an aggregate price of approximately $2.4 million. Under the License Agreement, we paid Vysera a license fee of $1.5 million and agreed to pay royalties on products we sell that incorporate the Licensed Technology. The license fee of $1.5 million has been allocated to developed technology, which we intend to amortize over 15 years. During 2011, we abandoned our Vysera coating technology of $500,000, which has been included in the accompanying consolidated statements of operations in acquired in-process research and development. On April 6, 2011, we supplemented and amended our Exclusive License, Development and Supply Agreement with Vysera to include the manufacturing rights for Vysera’s valve technology. We made an initial payment of $500,000 in April 2011 and a final payment of $500,000 in August of 2011. We have recorded the $1.0 million intangible asset as developed technology for purposes of our consolidated balance sheet and we intend to amortize it over an estimated life of 10 years.

On June 2, 2009, we entered into an Asset Purchase Agreement with Hatch Medical, L.L.C., a Georgia limited liability company (“Hatch”), to purchase assets associated with the EN Snare® foreign body retrieval system. We paid Hatch $21.0 million as of December 31, 2009. Our consolidated financial statements for the year ended December 31, 2009 reflect royalty income subsequent to the acquisition date of approximately $1.0 million and a net income of approximately $210,000 related to our Hatch acquisition. The purchase price was allocated as follows (in thousands):

Assets Acquired
 

Intangibles
 

Developed technology
$
8,100

Customer list
590

Non-compete
240

Trademark
650

Goodwill
11,420

Total assets acquired
21,000

 
 

Liabilities Assumed

 
 

Net assets acquired
$
21,000


With respect to the assets we acquired from Hatch, we are amortizing developed technology over 11 years and a non-compete covenant over seven years. The acquired trademarks are scheduled to renew in 3.87 years (based on a weighted-average computation, from December 31, 2009 until the trademark renewal date). While U.S. trademarks can be renewed indefinitely, we currently estimate that we will generate cash flow from the acquired trademarks for a period of 15 years from the acquisition date.


48


On February 18, 2009, we entered into an Asset Purchase Agreement with Alveolus to purchase their non-vascular interventional stents used for esophageal, tracheobronchial, and biliary stenting procedures. We paid Alveolus $19.1 million in March 2009. The gross amount of trade receivables we acquired from Alveolus is approximately $1.0 million, of which $49,000 was expected to be uncollectible. Our consolidated financial statements for the year ended December 31, 2009 reflect sales subsequent to the acquisition date of approximately $6.1 million and a net loss of approximately $2.3 million related to our acquisition of the Alveolus assets. The purchase price was allocated as follows (in thousands):

Assets Acquired
 

Inventories
$
1,741

Trade receivables
974

Other assets
241

Property and equipment
547

Intangibles
 

Developed technology
5,700

Trademarks
1,400

Customer lists
1,100

In-process research and development
400

Goodwill
8,028

Total assets acquired
20,131

 
 

Liabilities Assumed
 

Accounts payable
467

Other liabilities
572

Total liabilities assumed
1,039

 
 

Net assets acquired
$
19,092


With respect to the assets we acquired from Alveolus, we are amortizing the developed technology and trademarks over 15 years and customer lists on an accelerated basis over seven years. We intend to amortize the in-process research and development over 15 years, which will begin if the resulting product is successfully launched in the market. The acquired trademarks are scheduled to renew in 3.52 years (based on a weighted-average calculation, from December 31, 2009 until the trademark renewal date). While U.S. trademarks can be renewed indefinitely, we currently estimate that we will generate cash flow from the acquired trademarks for a period of 15 years from the acquisition date.

Our in-process research and development (“IPR&D”) intangible asset in the foregoing table represented the value of in-process projects acquired in 2009 that had not yet reached technological feasibility and had no alternative future uses as of the date of acquisition. The primary basis for determining the technological feasibility of these projects is obtaining regulatory approval to market the underlying products in an applicable geographic region. During 2011, we abandoned our IPR&D related to our covered biliary stent resulting in a charge of $400,000, which has been included in the accompanying consolidated statements of operations in acquired IPR&D.

On February 19, 2009, we entered into an Asset Purchase and Supply Agreement with Biosearch to purchase a bipolar coagulation probe and grafted biliary stents. We paid Biosearch $1.1 million in February 2009 and paid Biosearch an additional $500,000 in June 2009. Our consolidated financial statements for the year ended December 31, 2009 reflect sales subsequent to the acquisition date of approximately $1.6 million and net income of approximately $320,000 related to the Biosearch acquisition. The purchase price was allocated as follows (in thousands):


49


Assets Acquired
 

Inventories
$
188

Property and equipment
31

Intangibles
 

Developed technology
380

Customer lists
660

Non-compete
25

Goodwill
316

Total assets acquired
1,600

 
 

Liabilities Assumed

 
 

Net assets acquired
$
1,600


With respect to the assets we acquired from Biosearch, we are amortizing developed technology over 15 years, customer lists on an accelerated basis over eight years and a non-compete covenant over seven years.

The following table summarizes our consolidated results of operations for the year ended December 31, 2009, as well as the pro forma consolidated results of operations as though the Hatch, Alveolus and Biosearch transactions had occurred on January 1, 2009 (in thousands, except per share amounts):

 
Year Ended
December 31, 2009
 
As Reported
 
Pro Forma
Sales
$
257,462

 
$
259,914

Net income
22,530

 
22,470

Earnings per common share:
 

 
 

Basic
$
0.64

 
$
0.64

Diluted
$
0.63

 
$
0.63


The goodwill arising from the acquisitions discussed above consists largely of the synergies and economies of scale we hope to achieve from combining the acquired assets and operations with our historical operations (see Note 4). The goodwill recognized from these acquisitions is expected to be deductible for income tax purposes, except for the goodwill recognized in connection with our stock acquisition of BioSphere.

3.    INVENTORIES

Inventories at December 31, 2011 and 2010, consisted of the following (in thousands):

 
2011
 
2010
Finished goods
$
38,095

 
$
30,780

Work-in-process
6,047

 
7,012

Raw materials
25,769

 
22,805

 
 
 
 
Total
$
69,911

 
$
60,597

 


50


4.    GOODWILL AND INTANGIBLE ASSETS

The changes in the carrying amount of goodwill for the years ended December 31, 2011 and 2010, are as follows (in thousands):

 
2011
 
2010
Goodwill balance at January 1
$
58,675

 
$
33,002

Impairment charge

 
(8,343
)
Adjustment related to previous acquisitions
(228
)
 

Additions as the result of acquisitions
2,697

 
34,016

Goodwill balance at December 31
$
61,144

 
$
58,675


During our annual test of goodwill balances in 2010, which was completed during the third quarter, we determined that our goodwill related to our endoscopy reporting unit was impaired. We determined that, based on estimated future cash flows for this reporting unit, discounted back to their present value using a discount rate that reflects the risk profiles of the underlying activities, the carry value amount of this reporting unit was less than its estimated fair value. Some of the factors that influenced our estimated cash flows were slower sales growth in the products acquired from our Alveolus acquisition in March of 2009, uncertainty regarding acceptance of new products and continued operating losses in our endoscopy business segment. During the year ended December 31, 2010, we recorded an impairment charge of approximately $8.3 million, which was offset by approximately $3.2 million of deferred tax asset. As of December 31, 2011 and 2010, total accumulated goodwill impairment loss was approximately $8.3 million, all of which is related to the endoscopy segment.

Other intangible assets at December 31, 2011 and 2010, consisted of the following (in thousands):

 
2011
 
Gross
 
 
 
Net
 
Carrying
Amount
 
Accumulated
Amortization
 
Carrying
Amount
Patents
$
6,455

 
$
(1,704
)
 
$
4,751

Distribution agreement
2,426

 
(900
)
 
1,526

License agreements
1,983

 
(436
)
 
1,547

Trademark
5,746

 
(1,014
)
 
4,732

Covenant not to compete
315

 
(108
)
 
207

Customer lists
14,277

 
(5,786
)
 
8,491

Royalty agreements
267

 
(267
)
 

 
 
 
 
 
 
Total
$
31,469

 
$
(10,215
)
 
$
21,254


 
2010
 
Gross
 
 
 
Net
 
Carrying
Amount
 
Accumulated
Amortization
 
Carrying
Amount
Patents
$
4,631

 
$
(1,445
)
 
$
3,186

Distribution agreement
2,426

 
(641
)
 
1,785

License agreements
1,833

 
(352
)
 
1,481

Trademark
5,761

 
(636
)
 
5,125

In-process research and development
400

 

 
400

Covenant not to compete
315

 
(67
)
 
248

Customer lists
13,973

 
(3,287
)
 
10,686

Royalty agreements
267

 
(267
)
 

 
 
 
 
 
 
Total
$
29,606

 
$
(6,695
)
 
$
22,911



51


Aggregate amortization expense for the years ended December 31, 2011, 2010 and 2009 was approximately $6.0 million, $3.5 million and $2.3 million, respectively.

Estimated amortization expense for the intangible assets for the next five years consists of the following as of December 31, 2011 (in thousands):

Year Ending December 31
 
2012
$
5,767

2013
5,550

2014
5,090

2015
4,818

2016
4,811


5.    INCOME TAXES

For the years ended December 31, 2011, 2010 and 2009, income before income taxes is broken out between U.S. and foreign-sourced operations and consisted of the following (in thousands):

 
2011
 
2010
 
2009
Domestic
$
21,123

 
$
10,551

 
$
26,918

Foreign
11,752

 
6,237

 
6,176

 
 
 
 
 
 
Total
$
32,875

 
$
16,788

 
$
33,094


The components of the provision for income taxes for the years ended December 31, 2011, 2010 and 2009 consisted of the following (in thousands):

 
2011
 
2010
 
2009
 
 
 
 
 
 
Current expense:
 

 
 

 
 

Federal
$
5,662

 
$
3,547

 
$
7,846

State
1,001

 
595

 
689

Foreign
1,491

 
740

 
238

 
 
 
 
 
 
  Total current expense
8,154

 
4,882

 
8,773

 
 
 
 
 
 
Deferred expense (benefit):
 

 
 

 
 

Federal
1,121

 
30

 
1,264

State
74

 
(545
)
 
227

Foreign
482

 
(39
)
 
300

 
 
 
 
 
 
  Total deferred expense (benefit)
1,677

 
(554
)
 
1,791

 
 
 
 
 
 
Total
$
9,831

 
$
4,328

 
$
10,564



52


The difference between the income tax expense reported and amounts computed by applying the statutory federal rate of 35.0% to pretax income for the years ended December 31, 2011, 2010 and 2009 consisted of the following (in thousands):

 
2011
 
2010
 
2009
 
 
 
 
 
 
Computed federal income tax expense at statutory rate of 35%
$
11,506

 
$
5,876

 
$
11,583

State income taxes
699

 
33

 
596

Tax credits
(778
)
 
(530
)
 
(670
)
Production activity deduction
(425
)
 
(355
)
 
(215
)
Foreign tax rate differential
(1,297
)
 
(1,212
)
 
(1,062
)
Uncertain tax positions
281

 
(372
)
 
114

Deferred compensation insurance assets
88

 
(133
)
 
(196
)
Transaction-related expenses

 
323

 

Other — including the effect of graduated rates
(243
)
 
698

 
414

 
 
 
 
 
 
Total income tax expense
$
9,831

 
$
4,328

 
$
10,564


Deferred income tax assets and liabilities at December 31, 2011 and 2010, consisted of the following temporary differences and carry-forward items (in thousands):

 
2011
 
2010
 
 
 
 
Deferred income tax assets:
 
 
  

  Allowance for uncollectible accounts receivable
$
188

 
$
242

  Accrued compensation expense
3,064

 
3,230

  Inventory differences
364

 
1,796

  Net operating loss carry-forwards
22,689

 
26,273

  Deferred revenue
273

 
214

  Stock-based compensation expense
2,166

 
1,923

  Uncertain tax positions
1,052

 
577

  Other
1,848

 
1,686

Total deferred income tax assets
31,644

 
35,941

 
 
 
 
Deferred income tax liabilities:
  

 
  

  Prepaid expenses
(823
)
 
(493
)
  Property and equipment
(17,236
)
 
(18,103
)
  Intangible assets
(6,169
)
 
(9,320
)
  Other
(97
)
 
(505
)
Total deferred income tax liabilities
(24,325
)
 
(28,421
)
Valuation allowance
(361
)
 

Net deferred income tax assets
$
6,958

 
$
7,520

 


 


Reported as:
 
 
 
Deferred income tax assets - Current
$
3,704

 
$
4,647

Deferred income tax assets - Long-term
5,366

 
4,140

Deferred income tax liabilities - Current

 

Deferred income tax liabilities - Long-term
(2,112
)
 
(1,267
)
 
 
 
 
Net deferred income tax assets
$
6,958

 
$
7,520


The long-term deferred income tax balances are not netted as they represent deferred amounts applicable to different

53


taxing jurisdictions. Deferred income tax balances reflect the temporary differences between the carrying amounts of assets and liabilities and their tax bases and are stated at enacted tax rates expected to be in effect when taxes are actually paid or recovered. The valuation allowance is primarily related to state credit carryforwards for which we believe it is more likely than not that the deferred tax asset will not be realized.

We have not provided U.S. deferred income taxes or foreign withholding taxes on the undistributed earnings of certain foreign subsidiaries that are intended to be reinvested indefinitely in operations outside the United States. It is not practical to estimate the amount of additional taxes that might be payable on such undistributed earnings.

As of December 31, 2011 and 2010, we had U.S federal net operating loss carryforwards of approximately $64.6 million and $72.4 million, respectively, which were generated by BioSphere prior to our acquisition of BioSphere in September 2010. These net operating loss carryforwards, which expire at various dates through 2030, are subject to an annual limitation under Internal Revenue Code Section 382. We anticipate that we will utilize the net operating loss carryforwards over the next fifteen years. During 2011 and 2010, we utilized approximately $8.6 million and $2.6 million, respectively, in U.S. federal net operating loss carryforwards.

As of December 31, 2011 and 2010, we had non-U.S. net operating loss carryforwards of approximately $250,000 and $2.8 million, respectively, which had no expiration date. During 2011, we utilized approximately $2.6 million in non-U.S. net operating loss carryforwards.

We are subject to income taxes in the United States and numerous foreign jurisdictions. Significant judgment is required in determining our worldwide provision for income taxes and recording the related assets and liabilities. In the ordinary course of our business, there are many transactions and calculations where the ultimate tax determination is uncertain. In our opinion, we have made adequate provisions for income taxes for all years subject to audit. Our U.S. federal tax returns for the 2009 tax year are currently under examination by the United States Internal Revenue Service (the “IRS”). We are no longer subject to U.S. federal, state, and local income tax examinations by tax authorities for years before 2007. In foreign jurisdictions, we are no longer subject to income tax examinations for years before 2006.

Although we believe our estimates are reasonable, the final outcomes of these matters may be different from those which we have reflected in our historical income tax provisions and accruals. Such differences could have a material effect on our income tax provision and operating results in the period in which we make such determination.

The total liability for unrecognized tax benefits at December 31, 2011 and 2010, including temporary tax differences, was approximately $3.5 million and $3.5 million, respectively, of which approximately $2.4 million and $2.9 million, respectively, would favorably impact our effective tax rate if recognized. As of December 31, 2011 and 2010, we have accrued approximately $376,000 and $651,000 respectively, in total interest and penalties related to unrecognized tax benefits. We account for interest and penalties for unrecognized tax benefits as part of our income tax provision. During the years ended December 31, 2011, 2010 and 2009, we added interest and penalties of approximately $12,000, $400,000 and $9,000, respectively, to our liability for unrecognized tax benefits. We do not anticipate that unrecognized tax benefits will significantly increase or decrease within 12 months of the reporting date.

A reconciliation of the beginning and ending amount of liabilities associated with uncertain tax positions for the years ended December 31, 2011, 2010 and 2009 consisted of the following (in thousands):

Tabular Roll-forward
2011
 
2010
 
2009
 
 
 
 
 
 
Unrecognized tax benefits, opening balance
$
2,952

 
$
2,790

 
$
2,668

Gross increases in tax positions taken in a prior year
347

 
518

 
163

Gross decreases in tax positions taken in a prior year

 
(51
)
 
(40
)
Gross increases in tax positions taken in the current year
865

 
520

 
710

Settlements with taxing authorities
(507
)
 

 

Lapse of applicable statute of limitations
(544
)
 
(825
)
 
(711
)
Unrecognized tax benefits, ending balance
$
3,113

 
$
2,952

 
$
2,790


The tabular roll-forward ending balance does not include interest and penalties related to unrecognized tax benefits. During the year ended December 31, 2011, we paid approximately $507,000 to the IRS in order to settle a withholding tax issue related to our acquisition of BioSphere. The payment of the withholding tax did not have a material impact on our consolidated

54


financial statements for the year ended December 31, 2011, as the tax liability had been identified as part of our acquisition accounting of BioSphere and recorded in our consolidated financial statements.

6.    ACCRUED EXPENSES

Accrued expenses at December 31, 2011 and 2010, consisted of the following (in thousands):

 
2011
 
2010
 
 
 
 
Payroll taxes
$
1,786

 
$
1,234

Payroll
2,075

 
3,708

Bonuses
2,736

 
2,387

Commissions
912

 
818

Vacation
4,362

 
3,792

Royalties
1,310

 
1,104

Value-added tax
1,018

 
874

Other accrued expenses
5,998

 
4,973

 
 
 
 
Total
$
20,197

 
$
18,890


7.    REVOLVING CREDIT FACILITY AND LONG-TERM DEBT

We entered into the Credit Agreement with the Lenders and Wells Fargo, as administrative agent for the Lenders. Pursuant to the terms of the Credit Agreement, the Lenders have agreed to make revolving credit loans up to an aggregate amount of $125 million. Wells Fargo has also agreed to make swingline loans from time to time through the maturity date of September 10, 2015 in amounts equal to the difference between the amounts actually loaned by the Lenders and the aggregate credit commitment.

On September 10, 2015, all principal, interest and other amounts outstanding under the Credit Agreement are payable in full. At any time prior to the maturity date, we may repay any amounts owing under all revolving credit loans and all swingline loans in whole or in part, without premium or penalty.

Revolving credit loans made under the Credit Agreement bear interest, at our election, at either (i) the base rate (described below) plus 0.25%, (ii) the London Inter-Bank Offered Rate (“LIBOR”) Market Index Rate (as defined in the Credit Agreement) plus 1.25%, or (iii) the LIBOR Rate (as defined in the Credit Agreement) plus 1.25%. Swingline loans bear interest at the LIBOR Market Index Rate plus 1.25%. Interest on each loan featuring the base rate or the LIBOR Market Index Rate is due and payable on the last business day of each calendar month; interest on each loan featuring the LIBOR Rate is due and payable on the last day of each interest period selected by us when selecting the LIBOR Rate as the benchmark for interest calculation. For purposes of the Credit Agreement, the base rate means the highest of (i) the prime rate (as announced by Wells Fargo), (ii) the federal funds rate plus 0.50%, and (iii) LIBOR for an interest period of one month plus 1.00%.

The Credit Agreement contains covenants, representations and warranties and other terms, that are customary for revolving credit facilities of this nature. In this regard, the Credit Agreement requires us to maintain a leverage ratio and EBITDA ratio, consolidated net income, and limits the amount of annual capital expenditures. Additionally, the Credit Agreement contains various negative covenants with which we must comply, including, but not limited to, a prohibition on the payment of dividends and limitations respecting: the incurrence of indebtedness, the creation of liens on our property, mergers or similar combinations or liquidations, asset dispositions, investments in subsidiaries, and other provisions customary in similar types of agreements. As of December 31, 2011, we were in compliance with all financial debt covenants set forth in the Credit Agreement.

As of December 31, 2011, we had outstanding borrowings of approximately $30.7 million under the Credit Agreement, with available borrowings of approximately $94.3 million, based on the leverage ratio in the terms of the Credit Agreement. Our interest rate as of December 31, 2011 was a fixed rate of 1.54% on $24.0 million, a fixed rate of 1.55% on $5.0 million and a variable floating rate of 1.84% on approximately $1.7 million. Our interest rate as of December 31, 2010 was a fixed rate of 2.73% on $55.0 million as a result of an interest rate swap (see Note 8), a fixed rate of 1.52% on $22.0 million and a variable floating rate of 1.56% on approximately $4.5 million.

On December 7, 2006, we entered into an unsecured loan agreement with Bank of America, whereby Bank of America

55


agreed to provide us with a line of credit in the amount of $30.0 million, which expired on December 7, 2010. The loan agreement required us to pay interest at a rate equal to the lesser of (i) the maximum lawful rate of interest permitted under applicable usury laws, or (ii) Bank of America’s prime rate, plus a negative margin, as defined in the loan agreement. Alternatively, we could elect optional interest rates based on LIBOR during interest periods we agreed to with Bank of America. During the year ended December 31, 2010, all outstanding amounts were repaid and the loan agreement was terminated in September 2010.

8.    DERIVATIVES
 
General. Our earnings and cash flows are subject to fluctuations due to changes in interest rates and foreign currency exchange rates, and we seek to mitigate a portion of these risks by entering into derivative contracts. The derivatives we use are an interest rate swap and forward contracts. We recognize derivatives as either assets or liabilities at fair value in the accompanying consolidated balance sheets, regardless of whether or not hedge accounting is applied. We report cash flows arising from our hedging instruments consistent with the classification of cash flows from the underlying hedged items. Accordingly, cash flows associated with our derivative programs are classified as operating activities in the accompanying consolidated statements of cash flows.

We formally document, designate and assess the effectiveness of transactions that receive hedge accounting initially and on an ongoing basis. Changes in the fair value of derivatives that qualify for hedge accounting treatment are recorded, net of applicable taxes, in accumulated other comprehensive income (loss), a component of stockholders’ equity in the accompanying consolidated balance sheets. For the ineffective portions of qualifying hedges, the change in fair value is recorded through earnings in the period of change. Changes in the fair value of derivatives not designated as cash flow hedges are recorded in earnings throughout the term of the derivative instrument.

Interest Rate Swap. A portion of our debt bears interest at variable interest rates and therefore, we are subject to variability in the cash paid for interest expense. In order to mitigate a portion of this risk, we used a hedging strategy to reduce the variability of cash flows in the interest payments associated with the first $55 million of the total variable-rate debt outstanding under our Credit Agreement that was solely due to changes in the benchmark interest rate. This strategy allowed us to fix a portion of our interest payments.

On October 25, 2010, we entered into a $55 million pay-fixed, receive-variable interest rate swap with Wells Fargo at a fixed interest rate of 2.73%. The variable portion of the interest rate swap was tied to the one-month LIBOR rate (the benchmark interest rate). The interest rates under both the interest rate swap and the underlying debt reset, the swap was settled with the counterparty, and interest was paid, on a monthly basis. The interest rate swap was scheduled to expire on September 10, 2015. This interest rate swap qualified as a cash flow hedge.

At December 31, 2010, the interest rate swap qualified as a cash flow hedge. The fair value of our interest rate swap at December 31, 2010 was approximately $1.2 million, which was offset by approximately $451,000 of deferred tax liability. On July 7, 2011, we terminated our interest rate swap agreement, which resulted in a cash receipt of and gain of approximately $28,000 upon final settlement. During the years ended December 31, 2011 and 2010, the amount reclassified from accumulated other comprehensive income to earnings due to hedge effectiveness was approximately $73,000 and $20,000, respectively, which is included in interest expense in the accompanying consolidated statements of income.

Foreign Currency Forward Contracts. On November 30, 2011, we forecasted a net exposure for December 31, 2011 (representing the difference between Euro and GBP-denominated receivables and Euro-denominated payables) of approximately 12,000 Euros and 328,000 GBPs. In order to partially offset such risks at November 30, 2011, we entered into a 30-day forward contract for the Euro and GBP with a notional amount of approximately 12,000 Euros and notional amount of 328,000 GBPs. On November 30, 2010, we forecasted a net exposure for December 31, 2010 (representing the difference between Euro and GBP-denominated receivables and Euro-denominated payables) of approximately 658,000 Euros and 222,000 GBPs. In order to partially offset such risks at November 30, 2010, we entered into a 30-day forward contract for the Euro and GBP with a notional amount of approximately 658,000 Euros and notional amount of 222,000 GBPs. We enter into similar transactions at various times during the year to partially offset exchange rate risks we bear throughout the year. These contracts are marked to market at each month-end. During the years ended December 31, 2011, 2010 and 2009, we recorded a net gain on all forward contracts of approximately $221,000, $126,000 and $83,000, respectively, which is included in other income in the accompanying consolidated statements of income. The fair value of our open positions at December 31, 2011 and 2010 was not material.

9.    COMMITMENTS AND CONTINGENCIES

We are obligated under non-terminable operating leases for manufacturing facilities, finished good distribution, office space and equipment. Total rental expense on these operating leases and on our manufacturing and office building for the years

56


ended December 31, 2011, 2010 and 2009, approximated $4.1 million, $3.7 million and $2.8 million, respectively.

The future minimum lease payments for operating leases as of December 31, 2011, consisted of the following (in thousands):

Years Ending 
 
Operating
December 31
 
Leases
 
 
 

2012
 
$
3,444

2013
 
2,861

2014
 
2,353

2015
 
2,177

2016
 
2,165

Thereafter
 
6,378

 
 
 

Total minimum lease payments
 
$
19,378


Irish Government Development Agency Grants. As of December 31, 2011, we had entered into several grant agreements with the Irish Government Development Agency. We have recorded the grants related to research and development projects and costs of hiring and training employees as a reduction of operating expenses for the years ended December 31, 2011, 2010 and 2009 in the amounts of approximately $261,000, $40,000 and $177,000, respectively. Grants related to the acquisition of property and equipment purchased in Ireland are amortized as a reduction to depreciation expense over lives corresponding to the depreciable lives of such property and equipment. The balance of deferred credits related to such grants as of December 31, 2011 and 2010, was approximately $2.0 million and $1.8 million, respectively. During the years ended December 31, 2011, 2010 and 2009, approximately $106,000, $111,000 and $120,000, respectively, of the deferred credit was amortized as a reduction of operating expenses.

We have committed to repay the Irish government for grants received if we were to cease production in Ireland prior to the expiration of the grant liability period. The grant liability period is usually between five and eight years from the last claim made on a grant. As of December 31, 2011, the total amount of grants that could be subject to refund was approximately $500,000. Our management does not believe we will ever have to repay any of these grant monies, as we have no intention of ceasing operations in Ireland.

Letter of Credit. As of December 31, 2011, we had a standby letter of credit with Wells Fargo in the amount of approximately $88,000 which is related to the construction of our new building in South Jordan, Utah.

Litigation. In the ordinary course of business, and other than as described herein, we are involved in litigation and claims which management believes will not have a material effect on our financial position or results of operations.

Intellectual property rights, particularly patents, play a significant role in product development and help differentiate competitors in the medical device market. Competing companies file infringement lawsuits in attempts to bolster their intellectual property portfolios or enhance their financial standing. Intellectual property litigation is time consuming, costly and unpredictable. Monetary judgments, remedies or restitution are often not determined until the conclusion of trial court proceedings, which can be modified on appeal. Accordingly, the outcomes of pending litigation are difficult to predict or quantify. A third party has asserted that certain of our product offerings infringe their patents. We believe we have well-recognized defenses and intend to vigorously defend our position. While the pending litigation is in its preliminary stages and it is not possible to assess damages or predict an outcome, an adverse outcome could limit our ability to sell certain products or reduce our operating margin on the sale of these products and could have a material effect on our financial position, results of operations or liquidity. We are self-insured with respect to intellectual property infringement.

FDA Warning Letter. On February 1, 2012, Merit Medical Ireland Ltd., one of our wholly-owned subsidiaries (“Merit Ireland”), received a warning letter from the FDA (the “Warning Letter”) alleging that certain modifications to our hydrophilic coating process for our Laureate® Hydrophilic Guidewire (the “Guidewire”) constitute a significant change that could affect the Guidewire safety or effectiveness. In the Warning Letter, the FDA claimed that we do not have an approved application for premarket approval in effect pursuant to Section 515(a) of the FDCA or an approved application for an investigational device exemption under Section 520(g) of the Act. The FDA also claims in the Warning Letter that we did not properly notify the FDA of our intent to introduce the modified Guidewire into commercial distribution, as required by Section 510(k) of the Act. 

57



We have submitted a formal response to the FDA and have ceased all Guidewire shipments into, within and from the United States. Such shipments represent less than one percent of our worldwide revenues for the year ended December 31, 2011. There can be no assurance that the FDA will accept our response and approve the actions we have taken with respect to the Guidewire or permit us to manufacture, sell, market or distribute the Guidewire as currently offered and packaged. Even though we have timely responded to the FDA, there can be no assurances regarding the length of time or cost it will take us to resolve these issues to our satisfaction and to the satisfaction of the FDA.

10.    EARNINGS PER COMMON SHARE (EPS)

The computation of weighted average shares outstanding and the basic and diluted earnings per common share for the following periods consisted of the following (in thousands, except per share amounts):

 
Net
Income
 
Shares
 
Per Share
Amount
 
 
 
 
 
 
Year ended December 31, 2011:
 

 
 

 
 

Basic EPS
$
23,044

 
39,086

 
$
0.59

Effect of dilutive stock options and warrants
 

 
647

 
 

 
 
 
 
 
 
Diluted EPS
$
23,044

 
39,733

 
$
0.58

 
 
 
 
 
 
Year ended December 31, 2010:
 

 
 

 
 

Basic EPS
$
12,460

 
35,290

 
$
0.35

Effect of dilutive stock options and warrants
 

 
686

 
 

 
 
 
 
 
 
Diluted EPS
$
12,460

 
35,976

 
$
0.35

 
 
 
 
 
 
Year ended December 31, 2009:
 

 
 

 
 

Basic EPS
$
22,530

 
35,014

 
$
0.64

Effect of dilutive stock options and warrants
 

 
744

 
 

 
 
 
 
 
 
Diluted EPS
$
22,530

 
35,758

 
$
0.63


For the years ended December 31, 2011, 2010 and 2009, approximately 909,000, 878,000 and 681,000, respectively, of stock options were not included in the computation of diluted earnings per share because their effect would have been anti-dilutive.

11.    EMPLOYEE STOCK PURCHASE PLAN STOCK OPTIONS AND WARRANTS.

Our stock-based compensation primarily consists of the following plans:

2006 Long-Term Incentive Plan. In May 2006, our Board of Directors adopted and our shareholders approved, the Merit Medical Systems, Inc. 2006 Long-Term Incentive Plan (the “2006 Incentive Plan”). The 2006 Incentive Plan provides for the granting of stock options, stock appreciation rights, restricted stock, stock units (including restricted stock units) and performance awards. Options may be granted to directors, officers, outside consultants and key employees and may be granted upon such terms and such conditions as the Compensation Committee of our Board of Directors determines. Options will typically vest on an annual basis over a three to five year life (or one year if performance based) with contractual lives of seven to ten years. As of December 31, 2011, a total of approximately 1.4 million shares remained available to be issued under the 2006 Incentive Plan.

Employee Stock Purchase Plan. We have a qualified and a non-qualified Employee Stock Purchase Plan (“ESPP”), which has an expiration date of June 30, 2016. As of December 31, 2011, the total number of shares of Common Stock that remained available to be issued under our qualified plan was approximately 281,000 shares and 79,000 shares for our non-qualified plan. ESPP participants purchase shares on a quarterly basis at a price equal to 95% of the market price of the Common Stock at the end of the applicable offering period.

58


Stock-Based Compensation Expense. The stock-based compensation expense before income tax expense for the years ended December 31, 2011, 2010 and 2009, consisted of the following (in thousands):

 
2011
 
2010
 
2009
Cost of goods sold
$
241

 
$
201

 
$
205

Research and development
86

 
56

 
57

Selling, general, and administrative
1,317

 
1,037

 
920

Stock-based compensation expense before taxes
$
1,644

 
$
1,294

 
$
1,182


We recognize stock-based compensation expense (net of a forfeiture rate) for those awards which are expected to vest on a straight-line basis over the requisite service period. We estimate the forfeiture rate based on our historical experience and expectations about future forfeitures. As of December 31, 2011, the total remaining unrecognized compensation cost related to non-vested stock options, net of expected forfeitures, was approximately $5.9 million and is expected to be recognized over a weighted average period of 3.6 years.

In applying the Black-Scholes methodology to the option grants, the fair value of our stock-based awards granted were estimated using the following assumptions for the periods indicated below:

 
2011
 
2010
 
2009
 
 
 
 
 
 
 
 
Risk-free interest rate
0.68%
-
1.34%
 
2.24%
 
2.7%
Expected option life
4.2
-
6.0 years
 
6.0 years
 
6.0 years
Expected dividend yield
—%
 
—%
 
—%
Expected price volatility
42.11%
-
45.29%
 
41.4%
 
42.4%

The average risk-free interest rate is determined using the U.S. Treasury rate in effect as of the date of grant, based on the expected term of the stock option. We determine the expected term of the stock options using the historical exercise behavior of employees. The expected price volatility was determined using a weighted average of daily historical volatility of our stock price over the corresponding expected option life and implied volatility based on recent trends of the daily historical volatility. For options with a vesting period, compensation expense is recognized on a straight-line basis over the service period, which corresponds to the vesting period. Compensation expense is recognized immediately for options that are fully vested on the date of grant. During the years ended December 31, 2011, 2010 and 2009, 844,000, 125,000 and 175,000 stock-based compensation grants were made, respectively, for a total fair value of approximately $4.3 million, $705,000 and $1.0 million, net of estimated forfeitures, respectively.

The table below presents information related to stock option activity for the years ended December 31, 2011, 2010 and 2009 (in thousands):

 
2011
 
2010
 
2009
Total intrinsic value of stock options exercised
$
9,433

 
$
1,928

 
$
2,757

Cash received from stock option exercises
7,197

 
1,330

 
1,690

Net income tax benefit from the exercises of stock options
3,122

 
399

 
987


Changes in stock options for the year ended December 31, 2011, consisted of the following (shares and intrinsic value in thousands):

59


 
Number
of Shares
 
Weighted Average
Exercise Price
 
Remaining Contractual
Term (in years)
 
Intrinsic
Value
2011:
 

 
 

 
 

 
 

Beginning balance
4,389

 
$
10.56

 
 

 
 

Granted
844

 
13.75

 
 

 
 

Exercised
(1,099
)
 
7.69

 
 

 
 

Forfeited/expired
(57
)
 
13.00

 
 

 
 

Outstanding at December 31
4,077

 
11.96

 
3.5

 
$
7,877

Exercisable
2,744

 
11.43

 
2.5

 
7,090

Ending vested and expected to vest
4,049

 
11.95

 
3.5

 
7,871


The weighted average grant-date fair value of options granted during the years ended December 31, 2011, 2010 and 2009 was $5.28, $5.64 and $5.49, respectively.
 
The following table summarizes information about stock options outstanding at December 31, 2011 (shares in thousands):
 
 
 
 
 
 
Options Outstanding
 
Options Exercisable
Range of Exercise
 
Number Outstanding
 
Weighted Average Remaining Contractual Life (in years)
 
Weighted Average Exercise Price
 
Number Exercisable
 
Weighted Average Exercise Price
$7.65
-
$9.70
 
 
1,021

 
1.6

 
$
8.74

 
926

 
$
8.64

$9.71
-
$11.53
 
 
1,111

 
3.3

 
10.99

 
885

 
10.85

$12.02
-
$13.75
 
 
1,286

 
5.5

 
13.25

 
364

 
12.10

$13.82
-
$17.34
 
 
659

 
2.8

 
16.09

 
569

 
16.45

$7.65
-
$17.34
 
 
4,077

 
 

 
 

 
2,744

 
 


12.    SEGMENT REPORTING AND FOREIGN OPERATIONS

We report our operations in two operating segments: cardiovascular and endoscopy. Our cardiovascular segment consists of cardiology and radiology medical device products which assist in diagnosing and treating coronary artery disease, peripheral vascular disease and other non-vascular diseases and includes the embolization devices we acquired through BioSphere. Our endoscopy segment consists of gastroenterology and pulmonology medical device products which assist in the palliative treatment of expanding esophageal, tracheobronchial and biliary strictures caused by malignant tumors. We evaluate the performance of our operating segments based on operating income (loss). Listed below are the sales by business segment for the years ended December 31, 2011, 2010 and 2009 (in thousands):

 
Year Ended December 31,
 
% Change
 
2011
 
% Change
 
2010
 
% Change
 
2009
Cardiovascular
 

 
 

 
 

 
 

 
 

 
 

Stand-alone devices
15
%
 
$
101,959

 
16
%
 
$
88,586

 
12
 %
 
$
76,075

Custom kits and procedure trays
11
%
 
91,532

 
11
%
 
82,799

 
12
 %
 
74,541

Inflation devices
8
%
 
67,353

 
2
%
 
62,495

 
(1
)%
 
61,058

Catheters
23
%
 
55,357

 
18
%
 
44,824

 
23
 %
 
38,126

Embolization devices
247
%
 
31,229

 

 
9,003

 

 

Total
21
%
 
347,430

 
15
%
 
287,707

 
10
 %
 
249,800

 
 
 
 
 
 
 
 
 
 
 
 
Endoscopy
 

 
 

 
 

 
 

 
 

 
 

Endoscopy devices
33
%
 
12,019

 
18
%
 
9,048

 

 
7,662

 
 
 
 
 
 
 
 
 
 
 
 
Total
21
%
 
$
359,449

 
15
%
 
$
296,755

 
13
 %
 
$
257,462


During the years ended December 31, 2011, 2010 and 2009, we had foreign sales of approximately $125.9 million, $95.2 million and $86.4 million, respectively, or approximately 35%, 32% and 34%, respectively, of total sales, primarily in China, Japan, Germany, France and the United Kingdom. Foreign sales are attributed based on location of the customer receiving the product.

60



Our long-lived assets by geographic area at December 31, 2011, 2010 and 2009, consisted of the following (in thousands):

 
2011
 
2010
 
2009
United States
$
134,393

 
$
97,881

 
$
89,428

Ireland
36,008

 
22,203

 
17,148

Other foreign countries
8,739

 
7,971

 
8,070

 
 
 
 
 
 
Total
$
179,140

 
$
128,055

 
$
114,646


Financial information relating to our reportable operating segments and reconciliations to the consolidated totals for the years ended December 31, 2011, 2010 and 2009, are as follows (in thousands):

 
2011
 
2010
 
2009
Revenues
 

 
 

 
 

Cardiovascular
$
347,430

 
$
287,707

 
$
249,800

Endoscopy
12,019

 
9,048

 
7,662

Total revenues
359,449

 
296,755

 
257,462

 
 
 
 
 
 
Operating expenses
 

 
 

 
 

Cardiovascular
122,600

 
93,884

 
69,097

Endoscopy
9,678

 
9,066

 
6,858

Total operating expenses
132,278

 
102,950

 
75,955

 
 
 
 
 
 
Goodwill impairment charge
 

 
 

 
 

Cardiovascular

 

 

Endoscopy

 
8,344

 

Total goodwill impairment charge

 
8,344

 

 
 
 
 
 
 
Operating income (loss)
 

 
 

 
 

Cardiovascular
38,010

 
30,176

 
35,836

Endoscopy
(4,820
)
 
(12,972
)
 
(2,989
)
Total operating income
33,190

 
17,204

 
32,847

 
 
 
 
 
 
Total other income (expense) - net
(315
)
 
(416
)
 
247

Income tax expense
9,831

 
4,328

 
10,564

 
 
 
 
 
 
Net income
$
23,044

 
$
12,460

 
$
22,530


Total assets by business segment at December 31, 2011, 2010 and 2009, consisted of the following (in thousands):

 
2011
 
2010
 
2009
Cardiovascular
$
434,747

 
$
355,718

 
$
249,726

Endoscopy
12,270

 
13,762

 
21,787

 
 
 
 
 
 
Total
$
447,017

 
$
369,480

 
$
271,513



61


Total depreciation and amortization by business segment for the years ended December 31, 2011, 2010 and 2009, consisted of the following (in thousands):

 
2011
 
2010
 
2009
 
 
 
 
 
 
Cardiovascular
$
18,219

 
$
13,851

 
$
11,406

Endoscopy
975

 
1,005

 
865

Total
$
19,194

 
$
14,856

 
$
12,271



Total capital expenditures by business segment for the years ended December 31, 2011, 2010 and 2009, consisted of the following (in thousands):

 
2011
 
2010
 
2009
 
 
 
 
 
 
Cardiovascular
$
58,775

 
$
23,494

 
$
18,475

Endoscopy
420

 
154

 
3

Total
$
59,195

 
$
23,648

 
$
18,478


13.    ROYALTY AGREEMENTS

During 2007, in connection with the purchase of the ProGuide™ chronic dialysis catheter from Datascope Corporation, a New Jersey corporation, ("Datascope") we entered into a running royalty agreement as partial consideration of the assignment of acquired intellectual property to us. Under this agreement, we agreed to pay Datascope a royalty of 5% of net sales, with annual minimum royalty payments of $50,000 for calendar years 2009 through 2013. During each of the years ended December 31, 2011, 2010 and 2009, we paid or accrued a royalty of $50,000 under this agreement.

During 2010, in connection with our acquisition of BioSphere, we entered into a running royalty agreement as part of a partnership between BioSphere and L’Assistance Publique-Hôpitaux de Paris, referred to as “AP-HP,” pursuant to which AP-HP has granted us the exclusive license to use two United States patents and their foreign counterparts that we jointly own with AP-HP relating to microspheres. We are required to pay to AP-HP a royalty on the commercial sale of any products that incorporate technology covered by the patents. We may sublicense these exclusive rights under the agreement only with the prior written consent of AP-HP, which consent cannot be unreasonably withheld. Under the terms of the royalty agreement our exclusive license extends for the duration of both (i) the jointly owned U.S. and foreign counterpart patents which will expire in 2014 and 2012, respectively, and (ii) the products and specialties implementing the patents. On January 26, 2010, BioSphere filed patent applications which, if issued, will extend the royalty payments until approximately January 2031. The royalty rate in the agreement is 5.0% of net sales until the patents expire, and 2.5% of net sales thereafter as long as the product is sold.  We paid or accrued approximately $1.3 million and $401,000 in royalty payments to AP-HP for the years ended December 31, 2011 and 2010, respectively, after the BioSphere acquisition.

See also Note 2 for a discussion of additional future royalty commitments related to acquisitions.

14.    EMPLOYEE BENEFIT PLANS

We have a contributory 401(k) savings and profit sharing plan (the “Plan”) covering all U.S. full-time employees who are at least 18 years of age. The Plan has a 90 day minimum service requirement. We may contribute, at our discretion, matching contributions based on the employees’ compensation. Contributions we made to the Plan for the years ended December 31, 2011, 2010 and 2009, totaled approximately $1.2 million, $1.2 million and $883,000, respectively. We have defined contribution plans covering some of our foreign employees. We contribute between three and 36% of the employee’s compensation for certain foreign non-management employees, and between ten and 36% of the employee’s compensation for certain foreign management employees. Contributions made to these plans for the years ended December 31, 2011, 2010 and 2009, totaled approximately $469,000, $565,000 and $550,000, respectively.

62


15.    QUARTERLY RESULTS OF OPERATIONS (UNAUDITED)

Quarterly data for the years ended December 31, 2011 and 2010, consisted of the following (in thousands, except per share amounts):

 
Quarter Ended
 
March 31
 
June 30
 
September 30
 
December 31
 
 
 
 
 
 
 
 
2011
 

 
 

 
 

 
 

 
 
 
 
 
 
 
 
Net sales
$
86,631

 
$
91,249

 
$
90,477

 
$
91,092

Gross profit
39,785

 
42,484

 
41,054

 
42,145

Income from operations
10,210

 
10,847

 
6,507

 
5,626

Income tax expense
3,159

 
3,746

 
2,120

 
806

Net income
6,639

 
6,872

 
4,563

 
4,970

Basic earnings per common share
0.19

 
0.19

 
0.11

 
0.12

Diluted earnings per common share
0.18

 
0.18

 
0.11

 
0.12

 
 
 
 
 
 
 
 
2010
 

 
 

 
 

 
 

 
 
 
 
 
 
 
 
Net sales
$
67,432

 
$
74,948

 
$
73,172

 
$
81,203

Gross profit
28,435

 
32,458

 
31,247

 
36,358

Income (loss) from operations
6,346

 
8,777

 
(3,442
)
 
5,523

Income tax expense (benefit)
1,822

 
3,124

 
(1,539
)
 
921

Net income (loss)
4,508

 
5,715

 
(1,973
)
 
4,210

Basic earnings (loss) per common share
0.13

 
0.16

 
(0.06
)
 
0.12

Diluted earnings (loss) per common share
0.13

 
0.16

 
(0.06
)
 
0.12


Basic and diluted earnings (loss) per share are computed independently for each of the quarters presented. Therefore, the sum of the quarterly amounts may not equal the total computed for the year.

16.    FAIR VALUE MEASUREMENTS

Our financial assets and liabilities carried at fair value measured on a recurring basis as of December 31, 2011 and 2010, consisted of the following (in thousands):

 
 
 
 
Fair Value Measurements Using
 
 
Total Fair
 
Quoted prices in
 
Significant other
 
Significant
 
 
Value at
 
active markets
 
observable inputs
 
Unobservable inputs
Description
 
December 31, 2011
 
(Level 1)
 
(Level 2)
 
(Level 3)
 
 
 
 
 
 
 
 
 
Marketable securities (1)
 
$
2,798

 
$
2,798

 
$

 
$

 
 
 
 
 
 
 
 
 
 
 
 
 
Fair Value Measurements Using
 
 
Total Fair
 
Quoted prices in
 
Significant other
 
Significant
 
 
Value at
 
active markets
 
observable inputs
 
Unobservable inputs
Description
 
December 31, 2010
 
(Level 1)
 
(Level 2)
 
(Level 3)
 
 
 
 
 
 
 
 
 
Interest rate swap (2)
 
$
1,159

 
$

 
$
1,159

 
$

 
 
 
 
 
 
 
 
 

(1)    Our marketable securities, which consist entirely of available-for-sale equity securities, are valued using market prices in active markets. Level 1 instrument valuations are obtained from real-time quotes for transactions in active exchange markets involving identical assets.

63


(2)    The fair value of the interest rate swap is determined based on forward yield curves.

During the years ended December 31, 2011, 2010 and 2009, we had losses of approximately $103,000, $8.5 million, $154,000, respectively, related to the measurement of non-financial assets at fair value on a nonrecurring basis subsequent to their initial recognition. Of the total loss in 2010, approximately $8.3 million was related to the impairment of our goodwill related to our endoscopy reporting unit (see Note 4). The fair value of these non-financial assets was measured using Level 3 inputs. As of December 31, 2010, there was no goodwill remaining in our consolidated financial statements related to the endoscopy reporting unit.

The carrying amount of cash and cash equivalents, receivables, and trade payables approximates fair value because of the immediate, short-term maturity of these financial instruments. The carrying amount of long-term debt approximates fair value, as determined by borrowing rates estimated to be available to us for debt with similar terms and conditions.

17.    STOCKHOLDERS' EQUITY

Issuance of Common Stock. On June 22, 2011, we completed an equity public offering of 5,520,000 shares of Common Stock and received proceeds of approximately $87.7 million, which is net of approximately $4.6 million in underwriting discounts and commissions and approximately $127,000 in other direct costs incurred and paid by us in connection with this equity offering.

Stock Split. On April 21, 2011, our Board of Directors authorized a 5-for-4 forward stock split of our Common Stock, which was effected in the form of a stock dividend of one share of Common Stock for every four shares of Common Stock outstanding on the record date. On May 5, 2011, we completed the forward stock split through a stock dividend to shareholders of record as of May 2, 2011. Our Board of Directors also made corresponding adjustments to the number of shares subject to, and the exercise price of, outstanding options and other rights to acquire shares of our Common Stock. All earnings per common share and common share data set forth in the foregoing consolidated financial statements (and notes thereto) have been adjusted to reflect the split.

Repurchase of Our Common Stock. On April 30, 2007, our Board of Directors approved the repurchase of up to 1.4 million shares of Common Stock. During the first quarter of 2009, we repurchased a total of 250,158 shares of Common Stock for approximately $2.5 million. We did not repurchase any shares of Common Stock during 2011 and 2010.

18.    SUBSEQUENT EVENT

On January 31, 2012, we consummated the transactions contemplated by an Asset Purchase Agreement we executed with Ostial Solutions, LLC, a privately-held company based in Kalamazoo, Michigan ("Ostial Solutions"), and acquired substantially all of the assets of Ostial Solutions under terms which required $10.0 million of the purchase price to be paid at closing, $6.5 million of the purchase price to be paid within six months of closing and additional payments of up to $13.5 million based on our future product sales. The primary asset of Ostial Solutions is the patented Ostial Pro® Stent Positioning System, which facilitates precise stent implantation in coronary and renal aorto-ostial lesions, eliminating guesswork when deploying a stent at the "true" ostium of the vessel. The initial accounting for this acquisition has not yet been completed.

64



SUPPLEMENTARY FINANCIAL DATA

The supplementary financial information required by Item 302 of Regulation S-K is contained in Note 15 to our consolidated financial statements set forth above.

Item 9.
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.
 
None.
 
Item 9A.  
Controls and Procedures.
 
DISCLOSURE CONTROLS AND PROCEDURES
 
Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the design and operation of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) promulgated under the Securities Exchange Act of 1934 ("Exchange Act"), as of December 31, 2011.  Based on this evaluation, our principal executive officer and principal financial officer concluded that as of December 31, 2011, our disclosure controls and procedures were effective, at a reasonable assurance level, to ensure that information we are required to disclose in the reports we file or submit under the Exchange Act is (a) recorded, processed, summarized and reported, within the time periods specified in the SEC's rules and forms and is (b) accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.
 
INTERNAL CONTROL OVER FINANCIAL REPORTING
 
Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended.  Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America. 
 
Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2011. In making this assessment, our management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission ("COSO") in Internal Control-Integrated Framework. Based on those criteria and our management’s assessment, our management concluded that, as of December 31, 2011, our internal control over financial reporting was effective.
 
CHANGES IN INTERNAL CONTROL OVER FINANCIAL REPORTING
 
During the quarter ended December 31, 2011, there was no change in our internal control over financial reporting that materially affected, or is reasonably likely to materially affect our internal control over financial reporting.
 
Our independent registered public accountants have also issued an audit report on our internal control over financial reporting. Their report appears below.

65


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
To the Board of Directors and Shareholders of Merit Medical Systems, Inc.
 
We have audited the internal control over financial reporting of Merit Medical Systems, Inc. and subsidiaries (the “Company”) as of December 31, 2011, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
 
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
 
A company’s internal control over financial reporting is a process designed by, or under the supervision of, the company’s principal executive and principal financial officers, or persons performing similar functions and effected by the company’s board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
 
Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2011, based on the criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission.
 
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements and financial statement schedule as of and for the year ended December 31, 2011 of the Company and our report dated February 29, 2012 expressed an unqualified opinion on those financial statements and financial statement schedule.
 
/s/ DELOITTE & TOUCHE LLP
 
Salt Lake City, Utah
February 29, 2012

66


Item 9B.
Other Information.
 
None.
 
PART III
 
Items 10, 11, 12, 13 and 14.
 
These items are incorporated by reference to our definitive proxy statement relating to our Annual Meeting of Shareholders scheduled for May 23, 2012. We anticipate that our definitive proxy statement will be filed with the SEC not later than 120 days after December 31, 2011, pursuant to Regulation 14A of the Securities Exchange Act of 1934, as amended.
 
PART IV
 
Item 15.
Exhibits and Financial Statement Schedules.

(a)             Documents filed as part of this Report:

(1) Financial Statements. The following consolidated financial statements and the notes thereto, and the

Reports of Independent Registered Public Accounting Firm are incorporated by reference as provided in Item 8 and Item 9A of this report:


(2) Financial Statement Schedule.

                                   Schedule II - Valuation and qualifying accounts

Years Ended December 31, 2011, 2010 and 2009
(In thousands)

Description
 
Balance at
Beginning of Year
 
Additions Charged to
Costs and Expenses (a)
 
Deduction (b)
 
Balance at
End of Year
 
 
 
 
 
 
 
 
 
ALLOWANCE FOR UNCOLLECTIBLE ACCOUNTS:
 
 

 
 

 
 

 
 

 
 
 
 
 
 
 
 
 
2009
 
$
(505
)
 
$
(214
)
 
$
178

 
$
(541
)
2010
 
(541
)
 
(193
)
 
141

 
(593
)
2011
 
(593
)
 
(12
)
 
141

 
(464
)

(a) We record a bad debt provision based upon historical experience and a review of individual customer balances.
(b) When an individual customer balance becomes impaired and is deemed uncollectible a deduction is made against the allowance for uncollectible accounts.




67


Years Ended December 31, 2011, 2010 and 2009
(In thousands)

Description
 
Balance at
Beginning of Year
 
Additions Charged to
Costs and Expenses (c)
 
Deduction
 
Balance at
End of Year
 
 
 
 
 
 
 
 
 
TAX VALUATION ALLOWANCE:
 
 

 
 

 
 

 
 

 
 
 
 
 
 
 
 
 
2009
 

 

 

 

2010
 

 

 

 

2011
 

 
(361
)
 

 
(361
)

(c) We record a valuation allowance against a deferred tax asset when it is determined that it is more likely than not that the deferred tax asset will not be realized.


68


(b)              Exhibits:
 
The following exhibits required by Item 601 of Regulation S—K are filed herewith or have been filed previously with the SEC as indicated below:
 
 
Description
 
Exhibit No.
 
 
 
 
 
2.1
 
Agreement and Plan of Merger dated May 13, 2010 by and among Merit Medical Systems, Inc., Merit BioAcquisition Co., and BioSphere Medical, Inc.*
 
[Form 8-K filed May 13, 2010, Exhibit 2.1]
 
 
 
 
 
3.1
 
Articles of Incorporation as amended and restated*
 
[Form 10-Q filed August 14, 1996, Exhibit No. 1]
 
 
 
 
 
3.2
 
Amended and Restated Bylaws
 
Filed herewith
 
 
 
 
 
4
 
Specimen Certificate of the Common Stock*
 
[Form S–18 filed October 19, 1989, Exhibit No. 10]
 
 
 
 
 
4.3
 
Articles of Amendment of the Articles of Incorporation dated May 14, 1993*
 
[Form S-3 filed February 14, 2005, Exhibit 4.3]
 
 
 
 
 
4.4
 
Articles of Amendment to Articles of Incorporation dated June 6, 1996*
 
[Form S-3 filed February 14, 2005, Exhibit 4.4]
 
 
 
 
 
4.5
 
Articles of Amendment to Articles of Incorporation dated June 12, 1997*
 
[Form S-3 filed February 14, 2005, Exhibit 4.5]
 
 
 
 
 
4.7
 
Articles of Amendment to the Articles of Incorporation dated May 22, 2003*
 
[Form S-3 filed February 14, 2005, Exhibit 4.7]
 
 
 
 
 
4.8
 
Articles of Amendment to the Articles of Incorporation dated May 23, 2008*
 
[Form 8-K filed May 28, 2008, Exhibit 3.1]
 
 
 
 
 
10.1
 
Merit Medical Systems, Inc. Long Term Incentive Plan (as amended and restated) dated March 25, 1996*†
 
[Form 10-Q filed August 14, 1996, Exhibit No. 2]
 
 
 
 
 
10.2
 
Merit Medical Systems, Inc. 401(k) Profit Sharing Plan (as amended effective January 1, 1991*†
 
[Form S–1 filed February 14, 1992, Exhibit No. 8]
 
 
 
 
 
10.3
 
License Agreement, dated April 8, 1992 with Utah Medical Products, Inc.*
 
[Form S–1 filed February 14, 1992, Exhibit No. 5]
 
 
 
 
 
10.4
 
Lease Agreement dated as of June 8, 1993 for office and manufacturing facility*
 
[Form 10–K for year ended December 31, 1994, Exhibit No. 10.4]
 
 
 
 
 
10.12
 
Amended and Restated Deferred Compensation Plan*†
 
[Form 10-K for year ended December 31, 2003, Exhibit No. 10.12]
 
 
 
 
 
10.13
 
Purchase Agreement dated November 17, 2004 between Merit Medical Systems, Inc. and MedSource Packaging Concepts LLC*
 
[Form 10-K for year ended December 31, 2004, Exhibit No. 10.13]
 
 
 
 
 
10.17
 
Unsecured Loan Agreement with Bank of America, N.A.*
 
[Form 8-K filed December 7, 2006, Exhibit 10.1]
 
 
 
 
 
10.18
 
Seventh Amendment to the First Restatement of the Merit Medical Systems, Inc. 401(k) Profit Sharing Plan*†
 
[Form 10-K for year ended December 31, 2006, Exhibit No. 10.18]
 
 
 
 
 
10.19
 
Stock Purchase Agreement by and between Merit Medical Systems, Inc. and Sheen Man Co. LTD, dated April 1, 2007*
 
[Form 10-Q filed May 9, 2007, Exhibit No. 10.19]
 
 
 
 
 
10.20
 
Eighth Amendment to the First Restatement of the Merit Medical Systems, Inc. 401(k) Profit Sharing Plan*†
 
[Form 10-K for year ended December 31, 2007, Exhibit No. 10.20]
 
 
 
 
 

69


10.21
 
Ninth Amendment to the First Restatement of the Merit Medical Systems, Inc. 401(k) Profit Sharing Plan*†
 
[Form 10-K for year ended December 31, 2007, Exhibit No. 10.21]
 
 
 
 
 
10.22
 
Tenth Amendment to the First Restatement of the Merit Medical Systems, Inc. 401(k) Profit Sharing Plan*†
 
[Form 10-K for year ended December 31, 2007, Exhibit No. 10.22]
 
 
 
 
 
10.23
 
Merit Medical Systems, Inc. Amended and Restated Deferred Compensation Plan, effective January 1, 2008*†
 
[Form 8-K filed December 18, 2008, Exhibit 10.1]
 
 
 
 
 
10.29
 
Eleventh Amendment to the First Restatement of the Merit Medical Systems, Inc. 401(k) Profit Sharing Plan*†
 
[Form 10-K for year ended December 31, 2008, Exhibit No. 10.29]
 
 
 
 
 
10.30
 
Twelfth Amendment to the First Restatement of the Merit Medical Systems, Inc. 401(k) Profit Sharing Plan*†
 
[Form 10-K for year ended December 31, 2008, Exhibit No. 10.30]
 
 
 
 
 
10.31
 
Second Amendment to the Merit Medical Systems, Inc. 2006 Long-Term Incentive Plan*†
 
[Form 8-K filed May 27, 2009, Exhibit 10.1]
 
 
 
 
 
10.32
 
Second Restatement of the Merit Medical Systems, Inc. 401(k) Profit Sharing Plan*†
 
[Form 8-K filed January 7, 2010, Exhibit 10.1]
 
 
 
 
 
10.33
 
Stockholder and Voting Agreement, dated as of May 13, 2010, among Merit Medical Systems, Inc., Cerberus Partners, L.P. and Cerberus International, Ltd.*
 
[Form 8-K/A filed May 14, 2010, Exhibit 10.1]
 
 
 
 
 
10.34
 
Amendment No. 1 to Stockholder and Voting Agreement, dated as of June 1, 2010, among Merit Medical Systems, Inc., Cerberus Partners, L.P. and Cerberus International, Ltd. *
 
[Form 8-K filed June 2, 2010, Exhibit 10.2]
 
 
 
 
 
10.35
 
Credit Agreement dated as of September 10, 2010 by and among Merit Medical Systems, Inc. and Wells Fargo Bank, National Association*
 
[Form 8-K/A filed September 16, 2010, Exhibit 10.1]
 
 
 
 
 
10.36
 
Amended and Restated Employment Agreement of Fred P. Lampropoulos dated December 30, 2010*†
 
[Form 10-K for year ended December 31, 2010, Exhibit No. 10.36]
 
 
 
 
 
10.37
 
Amended and Restated Employment Agreement of Kent Stanger dated December 30, 2010*†
 
[Form 10-K for year ended December 31, 2010, Exhibit No. 10.37]
 
 
 
 
 
10.38
 
Amended and Restated Employment Agreement of Marty Stephens dated December 30, 2010*†
 
[Form 10-K for year ended December 31, 2010, Exhibit No. 10.38]
 
 
 
 
 
10.39
 
Amended and Restated Employment Agreement of Rashelle Perry dated December 30, 2010*†
 
[Form 10-K for year ended December 31, 2010, Exhibit No. 10.39]
 
 
 
 
 
10.40
 
Amended and Restated Employment Agreement of Arlin D. Nelson dated December 30, 2010*†
 
[Form 10-K for year ended December 31, 2010, Exhibit No. 10.40]
 
 
 
 
 
21
 
Subsidiaries of Merit Medical Systems, Inc
 
Filed herewith
 
 
 
 
 
23.1
 
Consent of Independent Registered Public Accounting Firm
 
Filed herewith
 
 
 
 
 
31.1
 
Certification of Chief Executive Officer
 
Filed herewith
 
 
 
 
 
31.2
 
Certification of Chief Financial Officer
 
Filed herewith
 
 
 
 
 
32.1
 
Certification of Chief Executive Officer
 
Filed herewith
 
 
 
 
 
32.2
 
Certification of Chief Financial Officer
 
Filed herewith
 
 
 
 
 

70


101
 
The following materials from the Merit Medical Systems, Inc.  Annual Report on Form 10-K for the fiscal year ended December 31, 2011, formatted in Extensible Business Reporting Language (XBRL): (i) the Consolidated Statements of Operations, (ii) Consolidated Balance Sheets, (iii) Consolidated Statements of Stockholders' Equity, (iv) Consolidated Statements of Cash Flows, and (v) related notes.

 
Filed herewith
 
 
 
 
 
*     These exhibits are incorporated herein by reference.
†     Indicates management contract or compensatory plan or arrangement.

(c)          Schedules:

None

71


SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Annual Report on Form 10-K to be signed on its behalf by the undersigned, thereunto duly authorized, on February 29, 2012.

 
MERIT MEDICAL SYSTEMS, INC.
 
 
 
 
 
By:
/s/ FRED P. LAMPROPOULOS
 
 
 
Fred P. Lampropoulos, President and
 
 
 
Chief Executive Officer
 
ADDITIONAL SIGNATURE AND POWER OF ATTORNEY
 
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities indicated on February 29, 2012. In addition, each person whose signature to this report appears below hereby constitutes and appoints Fred P. Lampropoulos and Kent W. Stanger, and each of them, as his true and lawful attorney-in-fact and agent, with full power of substitution, to sign on his behalf individually and in the capacity stated below and to perform any acts necessary to be done in order to file all amendments and post-effective amendments to this report, and any and all instruments or documents filed as part of or in connection with this report or the amendments thereto and each of the undersigned does hereby ratify and confirm all that said attorney-in-fact and agent, or his substitutes, shall do or cause to be done by virtue hereof.

Signature
 
Capacity in Which Signed
 
 
 
/s/: FRED P. LAMPROPOULOS
 
President, Chief Executive Officer and Director
Fred P. Lampropoulos
 
(Principal executive officer)
 
 
 
/s/: KENT W. STANGER
 
Chief Financial Officer, Secretary, Treasurer and
Kent W. Stanger
 
Director (Principal financial and accounting officer)
 
 
 
/s/: RICHARD W. EDELMAN
 
Director
Richard W. Edelman
 
 
 
 
 
/s/: REX C. BEAN
 
Director
Rex C. Bean
 
 
 
 
 
/s/: MICHAEL E. STILLABOWER
 
Director
Michael E. Stillabower
 
 
 
 
 
/s/: FRANKLIN J. MILLER
 
Director
Franklin J. Miller
 
 
 
 
 
/s/: NOLAN E. KARRAS
 
Director
Nolan E. Karras
 
 
 
 
 
/s/: A. SCOTT ANDERSON
 
Director
A. Scott Anderson

 
 

72