SEC FORM

AN OFFERING CIRCULAR PURSUANT TO REGULATION A RELATING TO THESE SECURITIES HAS BEEN FILED WITH THE SECURITIES AND EXCHANGE COMMISSION. INFORMATION CONTAINED IN THIS PRELIMINARY OFFERING CIRCULAR IS SUBJECT TO COMPLETION OR AMENDMENT. THESE SECURITIES MAY NOT BE SOLD NOR MAY OFFERS TO BUY BE ACCEPTED BEFORE THE OFFERING CIRCULAR FILED WITH THE COMMISSION IS QUALIFIED. THIS PRELIMINARY OFFERING CIRCULAR SHALL NOT CONSTITUTE AN OFFER TO SELL OR THE SOLICITATION OF AN OFFER TO BUY NOR MAY THERE BE ANY SALES OF THESE SECURITIES IN ANY STATE IN WHICH SUCH OFFER, SOLICITATION OR SALE WOULD BE UNLAWFUL BEFORE REGISTRATION OR QUALIFICATION UNDER THE LAWS OF SUCH STATE. WE MAY ELECT TO SATISFY OUR OBLIGATION TO DELIVER A FINAL OFFERING CIRCULAR BY SENDING YOU A NOTICE WITHIN TWO BUSINESS DAYS AFTER THE COMPLETION OF OUR SALE TO YOU THAT CONTAINS THE URL WHERE THE FINAL OFFERING CIRCULAR OR THE OFFERING CIRCULAR IN WHICH SUCH FINAL OFFERING CIRCULAR WAS FILED MAY BE OBTAINED.

OFFERING CIRCULAR

DATED: July 27, 2020

XCRAFT ENTERPRISES, INC.

418 Lakeside Avenue, Suite 8

Coeur d’Alene, ID. 83814

www.xcraft.io.com

Up to 895,140 shares of our Class B Common Stock (the “Class B Shares”), par value $0.0001 per share, at a price of $7.82 per share (plus $0.27370 per share which each investor shall pay directly to StartEngine Primary as a commission which fee will be refunded in the event the company does not raise any funds in this offering), plus bonus shares that may be issued to certain investors. See “Plan of Distribution – Investor Perks.” The minimum investment is $364.22 (45 Class B Shares), which includes the 3.5% commission to be paid by investors directly to StartEngine Primary as a commission.

SEE “SECURITIES BEING

OFFERED” AT PAGE __

XCraft Enterprises, Inc. is offering a maximum of 895,140 Class B Shares on a “best efforts” basis without a minimum investment target. The offering will terminate at the earlier of: (1) the date at which the maximum offering amount has been sold, (2) the date which is three years from this offering being qualified by the Commission, or (3) the date at which this offering is earlier terminated by us in our sole discretion. We may undertake one or more closings on a rolling basis. After each closing, funds tendered by investors will be available to us. Following this offering, the Company shall be subject to the reporting requirements pursuant to Rule 257(b).

Investors who invest $5,000 or more in this offering shall also be entitled to receive certain bonus shares. Fractional shares will not be distributed and share bonuses will be determined by rounding down to the nearest

whole share. Assuming all investors qualify for the maximum number of bonus shares, 134,271 additional bonus shares would be issued in this offering, which would cause immediate dilution to your investment. See “Plan of Distribution – Investor Perks.”

Subscription amounts shall be held in escrow by Prime Trust, our escrow agent, until the applicable closing.

GENERALLY, NO SALE MAY BE MADE TO YOU IN THIS OFFERING IF THE AGGREGATE PURCHASE PRICE YOU PAY IS MORE THAN 10% OF THE GREATER OF YOUR ANNUAL INCOME OR NET WORTH. DIFFERENT RULES APPLY TO ACCREDITED INVESTORS AND NON-NATURAL PERSONS. BEFORE MAKING ANY REPRESENTATION THAT YOUR INVESTMENT DOES NOT EXCEED APPLICABLE THRESHOLDS, WE ENCOURAGE YOU TO REVIEW RULE 251(d)(2)(i)(C) OF REGULATION A. FOR GENERAL INFORMATION ON INVESTING, WE ENCOURAGE YOU TO REFER TO www.investor.gov.

	Price to Public			Total Broker-Dealer discount and commisions (1)			Proceeds to issuer (2)
Per share	$	7.82	$		0.5474			$	7.2726
Broker commission paid by	$	0.2737	$					$
Investors Total Maximum:	$	7,244,995	$		490,000	(3)		$	6,754,995

(1)

We have engaged StartEngine Primary, member FINRA/SIPC, to perform placement agent functions, and its affiliate StartEngine CF, to perform administrative and technology-related functions in connection with this offering. We shall pay a cash commission of 3.5% to StartEngine Primary on sales of securities into states in which it is registered, and issue StartEngine Primary a warrant to purchase a number of Class B Share, equal to 5% of the shares purchased in this offering, which shall have an exercise price per share equal to the price per share of the shares issued in this offering. In addition, the investors shall pay a cash commission of 3.5% to StartEngine Primary on sales of securities into states in which it is registered, which is not reflected in the table. We will also pay an advance of $15,000 to StartEngine Primary for due diligence and conducting a compliance review of our offering. See “Plan of Distribution” for details regarding the compensation payable to third-parties in connection with this offering.

(2)

We estimate that the minimum amount of professional fees directly related to this offering that we will pay will be approximately $75,000 regardless of the number of shares that are sold in this offering. Additional expenses will be incurred for state notice filing fees, EDGARization costs and marketing expenses. In the event that the maximum offering amount is sold, we anticipate the total offering expenses we incur will be approximately $661,168, which includes the commission payable to StartEngine Primary.

(3)

Includes broker commission paid directly to StartEngine Primary by investors.

THE UNITED STATES SECURITIES AND EXCHANGE COMMISSION (THE “SEC”) DOES NOT PASS UPON THE MERITS OR GIVE ITS APPROVAL OF ANY SECURITIES OFFERED OR THE TERMS OF THE OFFERING, NOR DOES IT PASS UPON THE ACCURACY OR COMPLETENESS OF ANY OFFERING CIRCULAR OR OTHER SOLICITATION MATERIALS. THESE SECURITIES ARE OFFERED PURSUANT TO AN EXEMPTION FROM REGISTRATION WITH THE COMMISSION; HOWEVER, THE SEC HAS NOT MADE AN INDEPENDENT DETERMINATION THAT THE SECURITIES OFFERED ARE EXEMPT FROM REGISTRATION.

There is currently no trading market for our Class B Shares.

The Class B Shares have no voting rights.

These are speculative securities. Investing in our Class B Shares involves significant risks. You should purchase these securities only if you can afford a complete loss of your investment. See “Risk Factors” beginning on page ____.

Sales of these securities will commence within two (2) days of the qualification of this offering.

We shall file periodic reports as required pursuant to Rule 257(b).

We are following the “Offering Circular” format of disclosure under Regulation A.

TABLE OF CONTENTS
	Page
SUMMARY	5
RISK FACTORS	5
DILUTION	13
PLAN OF DISTRIBUTION	16
USE OF PROCEEDS	19
OUR BUSINESS	21
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS	24
DIRECTORS, EXECUTIVE OFFICERS AND SIGNIFICANT EMPLOYEES	26
COMPENSATION OF DIRECTORS AND EXECUTIVE OFFICERS	28
SECURITY OWNERSHIP OF MANAGEMENT AND CERTAIN SECURITY HOLDERS	29
INTERESTS OF MANAGEMENT AND OTHERS IN CERTAIN TRANSACTIONS	30
SECURITIES BEING OFFERED	31
FINANCIAL STATEMENTS	F-1

In this offering circular (this “Offering Circular”), the terms “XCraft,” “Company,” “us” and “we,” refer to XCraft Enterprises, Inc.

THIS OFFERING CIRCULAR MAY CONTAIN FORWARD-LOOKING STATEMENTS AND INFORMATION RELATING TO, AMONG OTHER THINGS, THE COMPANY, ITS BUSINESS PLAN AND STRATEGY, AND ITS INDUSTRY. THESE FORWARD-LOOKING STATEMENTS ARE BASED ON THE BELIEFS OF, ASSUMPTIONS MADE BY, AND INFORMATION CURRENTLY AVAILABLE TO OUR MANAGEMENT. WHEN USED IN THE OFFERING MATERIALS, THE WORDS “ESTIMATE,” “PROJECT,” “BELIEVE,” “ANTICIPATE,” “INTEND,” “EXPECT” AND SIMILAR EXPRESSIONS ARE INTENDED TO IDENTIFY FORWARD-LOOKING STATEMENTS. THESE STATEMENTS REFLECT MANAGEMENT’S CURRENT VIEWS WITH RESPECT TO FUTURE EVENTS AND ARE SUBJECT TO RISKS AND UNCERTAINTIES THAT COULD CAUSE OUR ACTUAL RESULTS TO DIFFER MATERIALLY FROM THOSE CONTAINED IN THE FORWARD-LOOKING STATEMENTS. INVESTORS ARE CAUTIONED NOT TO PLACE UNDUE RELIANCE ON THESE FORWARD-LOOKING STATEMENTS, WHICH SPEAK ONLY AS OF THE DATE ON WHICH THEY ARE MADE. WE DO NOT UNDERTAKE ANY OBLIGATION TO REVISE OR UPDATE THESE FORWARD-LOOKING STATEMENTS TO REFLECT EVENTS OR CIRCUMSTANCES AFTER SUCH DATE OR TO REFLECT THE OCCURRENCE OF UNANTICIPATED EVENTS.

SUMMARY

This Summary highlights information contained elsewhere in this Offering Circular, and does not contain all the information that you should consider in making your investment decision. Before investing in our Class B Shares, you should carefully read this entire Offering Circular, including our financial statements and related notes. You should consider among other information, the matters described under “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

The Company

We are a US drone company founded in September of 2014. Our mission is to develop powerful flying robots that change the world. We have a passion for technology, a passion for flight, and a passion for doing good in the world. We believe there is a need for quality, American-made drones at cost-competitive prices. We also believe there is a need for advanced technologies to support the upcoming Urban Air Mobility (UAM) space. We are heavily R&D-focused, and have a two pronged business model: We develop new UAV solutions for customers on a contract basis, and we develop, license and sell our own products. See “Our Business.”

The Offering

We are offering up to 895,140 Class B Shares for $7.82 per share (plus $0.2737 per share which each investor shall pay directly to StartEngine Primary as a commission), plus bonus shares that may be issued to certain investors. Assuming all investors qualify for the maximum number of bonus shares, 134,271 additional bonus shares would be issued in this offering, which would cause immediate dilution to your investment. See “Plan of Distribution –Investor Perks.”

The minimum investment is $364.22 (45 Class B Shares), which includes the 3.5% commission to be paid to StartEngine Primary as a commission.

Rights and Preferences of the Class B Shares

The holders of Class B Shares are entitled to receive pro rata dividends, if any, declared by our board of directors out of legally available funds, however, subject to any preferential right of the holders of any preferred stock that may be authorized and issued in the future.

The Class B Shares have no voting rights. As of July 1, 2020, JD Claridge, our sole officer and a director, owns a majority of our Class A Common Stock, which are our only voting securities. See “Risk Factors – Our sole officer and a director owns a majority of our voting shares.”

RISK FACTORS

Investing in our Class B Shares involves risk. In evaluating us and an investment in our Class B Shares, careful consideration should be given to the following risk factors, in addition to the other information included in this Offering Circular. Each of these risk factors could materially adversely affect our business, operating results or financial condition, as well as adversely affect the value of an investment in our Class B Shares. The following is a summary of the risk factors that we currently believe make this offering speculative or substantially risky. We are still subject to all the same risks faced by all companies in our industry, and to which all such companies in the economy are exposed. These include risks relating to economic downturns, political and economic events and technological developments (such as cyber-security). Additionally, early-stage companies are inherently riskier than more developed companies. You should consider general risks as well as specific risks when deciding whether to invest.

Risks Related to Our Business.

We depend on certain key personnel and must attract and retain additional talent.

Our future success depends on the efforts of key personnel and consultants, including, one of our directors and our sole officer, JD Claridge. As we grow, we will need to attract and hire additional employees in sales, marketing, design, development, operations, finance, legal, human resources and other areas. Depending on the economic environment and our performance, we may not be able to locate or attract qualified individuals for such positions when we need them. We may also make hiring mistakes, which can be costly in terms of resources spent in recruiting, hiring and investing in the incorrect individual and in the time delay in locating the right employee fit. If we are unable to attract, hire and retain the right talent or make too many hiring mistakes, it is likely that our business will suffer from not having the right employees in the right positions at the right time. This would likely adversely impact the value of your investment.

The operation of Unmanned Aircraft Systems (“UAS”) in urban environments may be subject to risks, such as accidental collisions and transmission interference, which may limit demand for our drones in such environments and harm our business and operating results.

Urban environments may present certain challenges to the operators of UAS. UAS may accidentally collide with other aircraft, persons or property, which could result in injury, death or property damage and significantly damage the reputation of and support for UAS in general. As the usage of UAS has increased, the danger of such collisions has increased. In addition, obstructions to effective transmissions in urban environments, such as large buildings, may limit the ability of the operator to utilize the aircraft for its intended purpose. The risks or limitations of operating UAS in urban environments may limit their value in such environments, which may limit demand for our drones and consequently materially harm our business and operating results.

As a manufacturer of consumer UAS, we are subject to various government regulations and may be subject to additional regulations in the future, the violation of which could subject us to sanctions or otherwise harm our business.

As a manufacturer of consumer products, we are subject to significant government regulations, including, in the United States, those issued under the Consumer Products Safety Act, as well as those issued under product safety and consumer protection statutes in our international markets. Failure to comply with any applicable product safety or consumer protection regulations could result in sanctions that could have a negative impact on our business, financial condition and results of operations.

Governments and regulatory agencies in the markets where we manufacture and sell products may enact additional regulations relating to product safety and consumer protection in the future, and may also increase the penalties for failure to comply with product safety and consumer protection regulations. Complying with any such additional regulations or requirements could impose increased costs on our business. Similarly, increased penalties for non-compliance could subject us to greater expenses in the event any of our products were found to not comply with such regulations. Such increased costs or penalties could harm our business.

Failure to obtain necessary regulatory approvals from the Federal Aviation Administration or other governmental agencies, or limitations put on the use of small UAS in response to public privacy or other concerns, may prevent us from selling our drones in the United States.

The regulation of small UAS for commercial use in the United States is undergoing substantial change and the ultimate treatment is uncertain. In 2006, the Federal Aviation Administration (the “FAA”) issued a clarification of its existing policies stating that, in order to engage in commercial use of small UAS in the U.S. National Airspace System, a public operator must obtain a Certificate of Authorization (a “COA”) from the FAA, to fly in restricted airspace. The FAA’s COA approval process requires that the public operator certify the airworthiness of the aircraft for its intended purpose, that a collision with another aircraft or other airspace user is extremely improbable, that the small unmanned aircraft system complies with appropriate cloud and terrain clearances and that the operator or spotter of the small unmanned aircraft system is generally within one half-mile laterally and 400 feet vertically of the small unmanned

aircraft system while in operation. Furthermore, the FAA’s clarification of existing policy stated that the rules for radio-controlled hobby aircraft do not apply to public or commercial use of small UAS.

On February 14, 2012, the FAA Modernization and Reform Act of 2012 was enacted, establishing various deadlines for the FAA to allow expanded use of small UAS for both public and commercial applications. On June 21, 2016, the FAA released its final rules regarding the routine use of certain small UAS (under 55 pounds) in the U.S. National Airspace System pursuant to the act. The rules, which became effective in August 2016, provide safety regulations for small UAS conducting non-recreational operations and contain various limitations and restrictions for such operations, including a requirement that operators keep UAS within visual-line-of-sight and prohibiting flights over unprotected people on the ground who are not directly participating in the operation of the UAS. We cannot assure you that these rules will not impede our ability to sell our drones.

In addition, there exists public concern regarding the privacy implications of U.S. commercial and law enforcement use of small UAS. This concern has included calls to develop explicit written policies and procedures establishing usage limitations. We cannot assure you that the response from regulatory agencies, customers and privacy advocates to these concerns will not delay or restrict the adoption of small UAS by non-military customers.

We face significant market competition.

We compete with larger, more established companies who currently have UAS on the market and/or various product development programs. Many of our competitors have more access to capital and marketing/sales channels and human resources than we do. They may succeed in developing and marketing competing products earlier than us, or products that are superior to ours. There can be no assurance that our competitors will not render our technology or product obsolete or that the products developed by us will be preferred to any existing or newly developed technologies. It should further be assumed that competition will intensify.

Risks of borrowing.

We have various loans outstanding, including, two loans from financial institutions which are secured by all of our assets. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Debt.” In addition, we may have to seek additional loans from financial institutions. If we default on any of our secured loans the lenders may be able to take possession of our assets, which could result in the cessation of our operations. In addition, certain of our existing loan agreements include, and future loan agreements may contain, financial and other covenants which, impair our operating flexibility, including, but not limited to, our ability to obtain further debt or pay dividends.

Our intellectual property could be unenforceable or ineffective.

One of our most valuable assets is our intellectual property. We have been issued three patents over various aspects of our technology and various trademarks. We have one patent pending, and plan to explore other opportunities to patent parts of our core technology; however, such patents may never be issued or certain claims may be rejected or may need to be narrowed, which may limit the protection we are attempting to obtain. In addition, companies, organizations, or individuals, including competitors, may hold or obtain patents, trademarks, or other proprietary rights that would prevent, limit, or interfere with our ability to make, use, develop, sell, or market our drones which would make it more difficult for us to operate our business. These third parties may have applied for, been granted, or obtained patents that relate to intellectual property, which competes with our intellectual property or technology. This may require us to develop or obtain alternative technology, or obtain appropriate licenses under these patents, which may not be available on acceptable terms or at all. Such a circumstance may result in us having to significantly increase development efforts and resources to redesign our technology in order to safeguard our competitive edge against competitors. There is a risk that our means of protecting our intellectual property rights may not be adequate, and weaknesses or failures in this area could adversely affect our business or reputation, financial condition, and/or operating results.

From time to time, we may receive communications from holders of patents or trademarks regarding their proprietary rights. Companies holding patents or other intellectual property rights may bring suits alleging infringement of such rights or otherwise assert their rights and urge us to take licenses. In addition, if we are determined to have infringed upon a third party’s intellectual property rights, we may be required to cease marketing and selling our drones, pay substantial damages, seek a license from the holder of the infringed intellectual property right, which license may not be available on reasonable terms or at all, and/or establish and maintain alternative branding for our business. We may also need to file lawsuits to protect our intellectual property rights from infringement from third parties, which could be expensive, time consuming, and distract management’s attention from our core operations.

We depend on technology and advanced information systems, which may fail or be subject to disruption.

There are no assurances that our software and website will be uninterrupted or fully secure, or that users will be willing to access, adopt, and use our website and software. Further, our software systems may be the target of malicious attacks seeking to identify and exploit weaknesses in our software. Cyber-attacks may target vendors, customers or other third parties, or the communication infrastructure on which they depend. Despite good faith efforts by us to mitigate the risks associated with cyber-attacks through various security protocols, an attack or a breach of security could result in a loss and theft of private data, violation of applicable privacy and other laws, significant legal and financial exposure, damage to reputation, and a loss of confidence in security measures, any of which could have a materially adverse effect on our business.

The integrity, reliability, and operational performance of our information technology (“IT”) infrastructure are critical to our operations. Our IT infrastructure may be damaged or interrupted by increases in usage, human error, unauthorized access, natural hazards or disasters, or similarly disruptive events. Furthermore, our systems may be unable to support a significant increase in traffic or increase in user numbers, whether as a result of organic or inorganic growth of the business. While we have taken several measures to safeguard against a failure of our IT infrastructure, or the telecommunications and/or other third-party infrastructure on which such infrastructure relies, could lead to significant costs and disruptions that could reduce revenue, damage our reputation, and have a materially adverse effect on our operations, financial performance, and prospects.

We intend to institute business continuity procedures and security measures to protect against network or IT failure or disruption. However, these procedures and measures may not be effective against all forms of disruptions and may not ensure that we are able to carry on our business. Should these measures and protections fail to operate as intended or at all, they may not prevent a material disruption to our operations, and the consequence of such would have a materially adverse effect on our financial performance and prospects.

We do not guarantee that the use of applications and systems designed for system security will effectively counter evolving security risks or address the security concerns of existing and potential users. Any failures in our security measures could have a materially adverse effect on our business, financial condition, and results of operations. In addition, our controls may not be effective in detecting or preventing any intrusion or other security breaches, or safeguarding against sabotage, hackers, viruses, and other forms of cybercrime. Any failure in these protections could harm our reputation and have a materially adverse effect on our operations, financial performance, and prospects.

We store investor, customer and vendor personal and other sensitive information/digital data. Any accidental or willful security breaches or other unauthorized access could cause the theft and criminal use of this data and/or theft and criminal use of our information. Security breaches or unauthorized access to confidential information could also expose us to liability related to the loss of the information, time-consuming and expensive litigation, and negative publicity. If security measures are breached because of third-party action, employee error, malfeasance or otherwise, or if design flaws in our software are exposed and exploited, and, as a result, a third party obtains unauthorized access to any of our investor, customer or vendor data, our relationships with our investors, customers, vendors, and/or other third parties will be severely damaged, and we could incur significant liability.

Since techniques used to obtain unauthorized access or to sabotage systems change frequently and generally are not recognized until they are launched against a target, we and any third-party hosting facility that we may use, may be unable to anticipate these techniques or to implement adequate preventative measures.

We may face technological and design challenges.

We may discover that the optimal retail price points for our drones are below where we can sustainably price our current low-cost architecture, which could necessitate the development of new product architecture that could take years to go from concept to product. It is possible that during our development of future products, one or more issues may arise that could cause us to abandon it. This could happen at any point in the development cycle and could result in a significant delay to achieving the lower-priced product line. If we need to develop a completely new product line, that could create significant delays and adversely impact the value of your investment.

Manufacturing and selling our products internationally may cause problems and present risks.

Certain components of our drones are manufactured internationally. There are many risks associated with international business. These risks include, but are not limited to, language barriers, fluctuations in currency exchange rates, political and economic instability, regulatory compliance difficulties, problems enforcing agreements, and greater exposure of our intellectual property to markets where a high probability of unlawful misappropriation may occur. Failure to successfully mitigate any of these potential risks could damage our business.

In addition, we are required to comply with all applicable domestic and foreign export control laws, including the International Traffic in Arms Regulations and the Export Administration Regulations. In addition, we may be subject to the Foreign Corrupt Practices Act and international counterparts that generally bar bribes or unreasonable gifts for foreign governments and officials. Violation of any of these laws or regulations could result in significant sanctions, which could reduce our future revenue and net income.

We are subject to changes in foreign currency exchange rates.

Some of our products or components of our products may be manufactured internationally and may be sold in other countries throughout the world. As a result, the price we pay for our products and what they may be sold for depend on the exchange rates between the U.S. dollar and other currencies. Over the past several years, these exchange rates have had material fluctuations and we expect they will continue to fluctuate. If the U.S. dollar becomes significantly weaker, our products will likely cost us more to manufacture and we may receive less than expected when they are sold, which could adversely impact the economics of our business and your investment.

Natural disasters and other events beyond our control could materially adversely affect us.

Natural disasters or other catastrophic events may cause damage or disruption to our operations, international commerce and the global economy, and thus could have a strong negative effect on us. Our business operations are subject to interruption by natural disasters, fire, power shortages, pandemics and other events beyond our control. Although we maintain crisis management and disaster response plans, such events could make it difficult or impossible for us to deliver our products to our customers and could decrease demand for our products. In December 2019, a novel strain of coronavirus, COVID-19, was reported in Wuhan, China. The World Health Organization has since declared the outbreak to constitute a pandemic. The extent of the impact of COVID-19 on our operational and financial performance will depend on certain developments, including the duration and spread of the outbreak, impact on our customers and our sales cycles and industry events, and the effect on our vendors, all of which are uncertain and cannot be predicted. At this point, the extent to which COVID-19 may impact our financial condition or results of operations is uncertain. The effect of COVID-19 may not be fully reflected in our results of operations until future periods, if at all. If the COVID-19 outbreak continues to spread, we may need to limit operations or implement limitations. There is a risk that other countries or regions may be less effective at containing COVID-19, or it may be more difficult to contain if the outbreak reaches a larger population or broader geography, in which case the risks described herein could be elevated significantly.

We store personally identifiable information of consumers which is subject to vast regulation.

Some jurisdictions have enacted laws requiring companies to notify individuals of data security breaches involving certain types of personal data. Evolving regulations regarding personal data and personal information, in the European Union and elsewhere, including, but not limited to, the General Data Protection Regulation, which we refer to as GDPR, the California Consumer Privacy Act of 2018 and similar privacy laws in other states and jurisdictions, may

limit or inhibit our ability to operate or expand our business, or market our products. Such laws and regulations require or may require us to implement privacy and security policies, permit consumers to access, correct or delete personal information stored or maintained by us, inform individuals of security incidents that affect their personal information, and, in some cases, obtain consent to use personal information for specified purposes. Such laws and regulations could restrict our ability and our customers’ ability to collect and use personal information, which may reduce demand for our solutions.

Changing industry standards and industry self-regulation regarding the collection, use and disclosure of data may have similar effects. Existing and future privacy and data protection laws and increasing sensitivity of consumers to unauthorized disclosures and use of personal information may also negatively affect the public’s perception of our kiosks and software. If our solutions are perceived to cause, or are otherwise unfavorably associated with, invasions of privacy, whether or not illegal, we or our customers may be subject to public criticism.

Any failure on our part to comply with applicable privacy and data protection laws, regulations, policies and standards or any inability to adequately address privacy concerns associated with our solutions, even if unfounded, could subject us to liability, damage our reputation, impair our sales and harm our business. Furthermore, the costs of compliance with, and other burdens imposed by, such laws, regulations, policies and standards may result in a decrease in our profitability and/or limit adoption of and demand for our products.

If critical components or raw materials used to manufacture our products become scarce or unavailable, then we may incur delays in manufacturing and delivery of our products, which could damage our business.

We obtain hardware components, various subsystems and systems from a limited group of suppliers. We do not have long-term agreements with any of these suppliers that obligate them to continue to sell components, subsystems, systems or products to us. Our reliance on these suppliers involves significant risks and uncertainties, including whether our suppliers will provide an adequate supply of required components, subsystems, or systems of sufficient quality, will increase prices for the components, subsystems or systems and will perform their obligations on a timely basis.

In addition, certain raw materials and components used in the manufacture of our products are periodically subject to supply shortages, and our business is subject to the risk of price increases and periodic delays in delivery. Particularly, the market for electronic components is experiencing increased demand, creating substantial uncertainty regarding our suppliers’ continued production of key components for our products. If we are unable to obtain components from third party suppliers in the quantities and of the quality that we require, on a timely basis and at acceptable prices, then we may not be able to deliver our products on a timely or cost effective basis to our customers, which could cause customers to terminate their contracts with us, increase our costs and seriously harm our business, results of operations and financial condition. Moreover, if any of our suppliers become financially unstable, or otherwise unable or unwilling to provide us with raw materials or components, then we may have to find new suppliers. It may take several months to locate alternative suppliers, if required, or to redesign our products to accommodate components from different suppliers. We may experience significant delays in manufacturing and shipping our products to customers and incur additional development, manufacturing and other costs to establish alternative sources of supply if we lose any of these sources or are required to redesign our products. We cannot predict if we will be able to obtain replacement components within the time frames that we require at an affordable cost, if at all.

If our drones fail to perform as expected, we may have to recall them and our ability to develop, market and sell our drones could be harmed.

Our drones may contain defects in design and manufacture that may cause them not to perform as expected or that may require repair. While we perform extensive internal testing, we will have a limited frame of reference by which to evaluate the performance of our drones. There can be no assurances that we will not be required to recall products in the future. There can be no assurance that we will be able to detect and fix any defects in the drones prior to their sale to consumers. In the future, we may at various times, voluntarily or involuntarily, initiate a recall if any of our drones or their components prove to be defective. In addition, our drones may not perform consistent with customers’ expectations or consistent with other drones currently available. Any product defects or any other failure of our drones to perform as expected could harm our reputation and result in adverse publicity, lost revenue, delivery delays, product

recalls, product liability claims, harm to our brand and reputation, and significant warranty and other expenses, and could have a material adverse impact on our business, financial condition, operating results and prospects.

We may become subject to product liability claims, which could harm our financial condition and liquidity if we are not able to successfully defend or insure against such claims.

The risk of product liability claims, product recalls, and associated adverse publicity is inherent in the manufacturing, marketing, and sale of drones. We may become subject to product liability claims, which could harm our business, prospects, operating results and financial condition. We face the risk of exposure to claims in the event our drones do not perform as expected or malfunction resulting in personal injury or death. A successful product liability claim against us could require us to pay a substantial monetary award. In addition, a product liability claim could generate substantial negative publicity about our drones and business and inhibit or prevent commercialization of other future products which would have material adverse effect on our brand, business, prospects and operating results. Any lawsuit or claim, regardless of its merit, may have a material adverse effect on our reputation, business and financial condition.

If we are unable to adequately control the costs associated with operating our business, including our costs of manufacturing, marketing and sales, our business, financial condition, operating results and prospects will suffer.

If we are unable to maintain a sufficiently low level of costs for designing, manufacturing, marketing, selling and distributing our drones relative to their selling prices, our operating results, gross margins, business and prospects could be materially and adversely impacted. We have made, and will be required to continue to make, significant investments in the design, manufacture, marketing and sale of our drones. There can be no assurances that our costs of producing and delivering our drones will be less than the revenue we generate from sales.

Risks Related to this offering of our Class B Shares.

This Offering is being conducted on a “best efforts” basis and does not require a minimum amount to be raised. As a result, we may not be able to raise enough funds to fully implement our business plan and our investors may lose their entire investment.

We are offering Class B Shares in the amount of up to $7,000,000 (plus $0.27370 per share which each investor shall pay directly to StartEngine Primary as a commission), in this offering, but may sell much less. The Offering is being conducted on a “best efforts” basis and does not require a minimum amount to be raised. If we are not able to raise sufficient funds, we may not be able to fund our operations as planned, and our growth opportunities may be materially adversely affected. Even if we raise the maximum amount we are seeking in this offering, we may need additional funds in the future in order to grow, and if we cannot raise those funds for whatever reason, including reasons outside our control, such as another significant downturn in the economy, we may not survive.

Terms of subsequent financings may adversely impact your investment.

Even if we are successful in this offering, we may need to engage in common equity, debt or preferred stock financings in the future. Your rights and the value of your investment in the Class B Shares could be reduced. Interest on debt securities could increase costs and negatively impact operating results. Preferred stock could be issued in series from time to time with such designations, rights, preferences, and limitations as needed to raise capital. The terms of preferred stock could be more advantageous to those investors than to the holders of Class B Shares. In addition, if we need to raise more equity capital from the sale of equity securities, institutional or other investors may negotiate terms at least as, and possibly more, favorable than the terms of your investment.

Certain investors are entitled to pay a lower price for our shares.

We are offering our Class B Shares for $7.82 per share (plus $0.27370 per share which each investor shall pay directly to StartEngine Primary as a commission). Investors who invest $5,000 or more in this offering shall also be entitled to receive certain bonus shares. Assuming all investors qualify for the maximum number of bonus shares, 134,271

additional bonus shares would be issued in this offering, which would cause immediate dilution to your investment. See “Plan of Distribution – Investor Perks.”

Because no public trading market for our Class B Shares currently exists, it will be difficult for you to sell your Class B Shares and, if you are able to sell your Class B Shares, you may have to sell them at a substantial discount to the price you paid for the Class B Shares.

There is no public market for our Class B Shares. Until our Class B Shares are listed on an exchange, if ever, you may not sell your Class B Shares unless the buyer meets the applicable suitability and minimum purchase standards. Therefore, it will be difficult for you to sell your Class B Shares promptly or at all. If you are able to sell your Class B Shares, you may have to sell them at a substantial discount to the price you paid for the Class B Shares.

Investors in our Class B Shares have no voting rights.

Subject to applicable law and, except as mentioned in our organizational documents, the holders of Class B Shares have no voting rights, management or control rights or influence or vote on any corporate matters, and the voting stockholders and directors may take actions of which a majority of the holders of Class B Shares disapprove. In assessing the risks and rewards of an investment in the Class B Shares, investors must be aware that they are relying solely on the good faith, judgment, and ability of our directors, officers, employees and holders of our voting shares, to make appropriate decisions in respect to our management, and the holders of Class B Shares will be subject to the decisions of our directors, officers, employees and holders of our voting shares.

Our sole officer and a director, owns a majority of our voting shares.

As of the date of this Offering Circular, JD Claridge, our sole officer and a director, owns a majority of our Class A Common Stock, which are our only voting securities. Therefore, Mr. Claridge is able control our management and affairs and most matters requiring stockholder approval, including, but not limited to, the election of directors and approval of significant corporate transactions. This concentration of ownership and voting power may have the effect of delaying or preventing a change in control, which may not be in the best interest of our other stockholders.

Management discretion as to use of proceeds.

Our success will be substantially dependent upon the discretion and judgment of our management team with respect to the application and allocation of the proceeds of this offering. The use of proceeds described herein is an estimate based on our current business plan. We, however, may find it necessary or advisable to re-allocate portions of the net proceeds reserved for one category to another, and we will have broad discretion in doing so.

The subscription agreement includes an exclusive venue provision.

Our subscription agreement includes a forum selection provision that requires any claim against us based on the subscription agreement not arising under the federal securities laws to be brought in a court of competent jurisdiction in the State of Idaho. This forum selection provisions may limit investors’ ability to bring claims in judicial forums that they find favorable to such disputes and may discourage lawsuits with respect to such claims, as investors may be compelled to travel to Idaho to prosecute or defend any claims involving us.

We are not likely to pay cash dividends in the foreseeable future.

We currently intend to retain any future earnings for use in the operation and expansion of our business. Accordingly, we do not expect to pay any cash dividends in the foreseeable future but will review this policy as circumstances dictate.

Our Class B Shares may be subject to registration under the Exchange Act.

Companies with total assets above $10 million and more than 2,000 holders of record of its equity securities, or 500 holders of record of its equity securities who are not accredited investors, at the end of their fiscal year, must register that class of equity securities with the SEC under the Exchange Act. We currently have over 2,000 holders of our

Class B Shares. If and when we are deemed to have assets above $10 million, we could be required to register our Class B Shares with the SEC under the Exchange Act, which would be a laborious and expensive process. In addition, if such registration takes place, we will have materially higher compliance and reporting costs going forward.

Foreign securities laws.

Prior to accepting any subscriptions from residents of foreign jurisdictions, we intend to consult with local counsel to ensure we accept any such subscription in compliance with local law. If, however, we accept any subscriptions and fail to comply with local law, it may subject us to regulatory actions in such foreign jurisdictions.

DILUTION

Dilution means a reduction in value, control or earnings of the shares an investor owns.

Immediate dilution

An early-stage company typically sells its securities to its founders and early employees (collectively, “Founders”) at very low prices because, in most cases, they provide services to the business but are not paid market wages. Likewise, when a business is seeking financing to begin its operations, the prices at which it may sell its securities to early investors, often family members or friends, are low. Later in its development, when the business seeks cash investments from new, unrelated investors, like you and the investors in our prior Regulation CF offerings, the new investors often pay a higher price for their securities than the price paid by the Founders and early investors. Each currently outstanding Class B Share and share of Class A Voting Common Stock (the “Class A Shares”), have the same economic rights. This means that the book value for each Class B Share you purchase is diluted because the book value per share of all the Class B Shares and Class A Shares is the same, but you paid more for your Class B Shares than the Founders or prior investors paid for their Class A Shares or Class B Shares.

The tables below compare the price that investors in this offering will pay for their Class B Shares assuming the sale of 25%, 50%, 75% and 100% of the Class B Shares we are offering, with the effective cash price paid for Class B Shares and Class A Shares by the Founders and prior investors. The average price per share for Class B Shares issued in this offering as reflected in the tables, does not include $0.27370 per share, which each investor shall pay directly to StartEngine Primary as a commission.

100% or $7,244,995
	Shares Purchased		Total Consideration		Avg Price Per Share
	Number	Percent	Amount	Percent
Founders/Early Employees	3,014,987	56.188%	$270	0.003%	$0.0001
Regulation D (Class A Common )	526,250	9.807%	$526,250	5.445%	$1.0000
Regulation CF Investors (2017)	629,411	11.730%	$1,070,000	11.071%	$1.7000
Regulation CF (2020)	300,076	5.592%	$1,068,271	11.053%	$3.5600
New Investors	895,140	16.682%	$6,999,995	72.428%	$7.8200
TOTAL	5,365,864	100.000%	$9,664,785	100.000%	$1.8012

75% or $5,433,746
	Shares Purchased		Total Consideration		Avg Price Per Share
	Number	Percent	Amount	Percent
Founders/Early Employees	3,014,987	58.634%	$270	0.003%	$0.0001
Regulation D (Class A Common )	526,250	10.234%	$526,250	6.649%	$1.0000
Regulation CF Investors (2017)	629,411	12.240%	$1,070,000	13.519%	$1.7000
Regulation CF (2018)	300,076	5.836%	$1,068,271	13.497%	$3.5600
New Investors	671,355	13.056%	$5,249,996	66.331%	$7.8200
TOTAL	5,142,079	100.000%	$7,914,787	100.000%	$1.5392

50% or $3,622,497
	Shares Purchased		Total Consideration		Avg Price Per Share
	Number	Percent	Amount	Percent
Founders/Early Employees	3,014,987	61.301%	$270	0.004%	$0.0001
Regulation D (Class A Common )	526,250	10.700%	$526,250	8.536%	$1.0000
Regulation CF Investors (2017)	629,411	12.797%	$1,070,000	17.357%	$1.7000
Regulation CF (2018)	300,076	6.101%	$1,068,271	17.329%	$3.5600
New Investors	447,570	9.100%	$3,499,997	56.774%	$7.8200
TOTAL	4,918,294	100.000%	$6,164,788	100.000%	$1.2534

25% or $1,811,249
	Shares Purchased		Total Consideration		Avg Price Per Share
	Number	Percent	Amount	Percent
Founders/Early Employees	3,014,987	64.224%	$270	0.006%	$0.0001
Regulation D (Class A Common )	526,250	11.210%	$526,250	11.920%	$1.0000
Regulation CF Investors (2017)	629,411	13.407%	$1,070,000	24.237%	$1.7000
Regulation CF (2018)	300,076	6.392%	$1,068,271	24.198%	$3.5600
New Investors	223,785	4.767%	$1,749,999	39.639%	$7.8200
TOTAL	4,694,509	100.000%	$4,414,789	100.000%	$0.9404

There is no accurate way to predict who will invest or how many bonus shares an investor may be entitled to and how that will impact dilution, however, assuming all investors qualify for the maximum number of bonus shares, 134,271 additional bonus shares would be issued in this offering, which would cause immediate dilution to your investment. See “Plan of Distribution – Investor Perks.”

Future dilution

Another important way of looking at dilution is the dilution that happens due to future actions by us. The investor’s stake in a company could be diluted due to the company issuing additional shares of common stock or securities convertible into shares of common stock. In other words, when the company issues more securities, the percentage of the company that you own will go down, even though the value of the company may go up. You will own a smaller piece of a larger company. This increase in number of shares outstanding could result from a stock offering (such as an initial public offering, another crowdfunding round, a venture capital round, or angel investment), employees exercising stock options, or by conversion of certain instruments (e.g. convertible bonds, preferred shares or warrants) into stock.

If we decide to issue more shares, an investor could experience value dilution, with each share being worth less than before, and control dilution, with the total percentage an investor owns being less than before. There may also be earnings dilution, with a reduction in the amount earned per share (though this typically occurs only if the company offers dividends, and most early stage companies are unlikely to offer dividends, preferring to invest any earnings into the company).

The type of dilution that hurts early-stage investors most occurs when the company sells more shares, or other equity securities in a “down round,” meaning at a lower valuation than in earlier offerings. An example of how this might occur is as follows (numbers are for illustrative purposes only):

In June 2019, Ben invests $20,000 in shares that represent 2% of a company valued at $1 million.

In December, the company is doing very well and sells $5 million in shares to venture capitalists on a valuation (before the new investment) of $10 million. Ben now owns only 1.3% of the company but his stake is worth $200,000.

In June 2020, the company has run into serious problems and in order to stay afloat, it raises $1 million at a valuation of only $2 million (the “down round”). Ben now owns only 0.89% of the company and his stake is worth only $26,660.

This type of dilution might also happen upon the conversion or exercise of convertible notes, stock options or warrants into shares. Typically, the terms of convertible notes issued by early-stage companies provide that in the event of another round of financing, the holders of the convertible notes get to convert their notes into equity at a “discount” to the price paid by the new investors, i.e., they get more shares than the new investors would for the same price. Additionally, convertible notes may have a “price cap” on the conversion price, which effectively acts as a share price ceiling. Either way, the holders of the convertible notes get more shares for their money than new investors. In the event that the financing is a “down round,” the holders of the convertible notes will dilute existing equity holders, and even more than the new investors do because they get more shares for their money. See “Securities Being Offered” for a description of our outstanding securities.

As of July 1, 2020, we had an outstanding warrant to purchase 7,000 Class B Shares having an exercise price of $1.70 per share, and a warrant to purchase 200,000 Class A Shares having an exercise price of $0.01 per share. In addition, as of July 1, 2020, we had options outstanding to purchase 413,418 Class A Shares, 353,418 of which have an exercise price of $1.70 per share, and 60,000 of which have an exercise price of $3.56 per share. The exercise of such options or warrants shall have the effect of diluting the existing investors.

If you are making an investment expecting to own a certain percentage of our capital stock or expecting each Class B Share to hold a certain amount of value, it is important to realize how the value of the Class B Shares can decrease by actions taken by us. Dilution can make drastic changes to the value of each share, ownership percentage, voting control, and earnings per share.

PLAN OF DISTRIBUTION

Plan of Distribution

We are offering a maximum of 895,140 Class B Shares on a “best efforts” basis, plus any bonus shares that may be issued to certain investors. Assuming all investors qualify for the maximum number of bonus shares, 134,271 additional bonus shares would be issued in this offering, which would cause immediate dilution to your investment. See “Plan of Distribution – Investor Perks.”

The offering will terminate at the earlier of: (1) the date at which the maximum offering amount has been sold, (2) the date which is three years from this offering being qualified by the Commission, or (3) the date at which this offering is earlier terminated by us in our sole discretion.

The cash price per share of the Class B Shares is $7.82 (plus $0.27370 per share which each investor shall pay directly to StartEngine Primary as a commission).

We may undertake one or more closings on a rolling basis. After each closing, funds tendered by investors will be available to us. Following this offering, we shall be subject to the reporting requirements pursuant to Rule 257(b).

We have engaged StartEngine Primary, LLC (“StartEngine Primary”) a broker-dealer registered with the SEC and a member of FINRA, to perform brokerage services in accordance with a posting agreement dated February 21, 2020 (“Posting Agreement”) on a best efforts basis, which Posting Agreement can be found in Exhibit 1.0 to the Offering Statement of which this offering circular is a part. StartEngine Primary is under no obligation to purchase any securities or arrange for the sale of any specific number or dollar amount of securities. Persons who desire information about this offering may find it at https://www.startengine.com/xraft (the “Online Platform”). This offering circular will be furnished to prospective investors via download 24 hours per day, 7 days per week on the Online Platform.

In addition, we have engaged an affiliate of StartEngine Primary, StartEngine Crowdfunding, Inc. (“StartEngine CF”), to perform administrative and technology-related functions in connection with this offering on its platform. StartEngine Primary will use the Online Platform to provide technology tools to allow for the sales of securities in this offering. In addition, StartEngine CF will assist with the facilitation of credit and debit card payments through the Online Platform. We shall reimburse StartEngine for the following expenses (i) any applicable fees for fund transfers, (ii) all credit card charges charged to StartEngine by its credit card processor (typically 3.5%), (iii) escrow agent fees charged to StartEngine by third party escrow agents, and (iv) fees charged in connection with chargebacks or payment reversals.

Commissions and Discounts

The following table shows the total discounts and commissions payable to StartEngine Primary in connection with this offering:

	Per Share
Public Offering Price	$	7.82
Placement Agent Commissions	$	0.5474
Proceeds, before expenses, to us	$	7.2726

We shall also issue StartEngine Primary a warrant to purchase a number of Class B Shares, equal to 5% of the shares purchased in this offering, having an exercise price of $7.82 per share. The disposition of the warrant is subject to FINRA lockup restrictions pursuant to FINRA Rule 5110(g)(1), and pursuant to the Exhibit A of the Posting Agreement, the parties have agreed on a lock up period of 180 days immediately following the date of the commencement of sales in this offering.

Other Terms

In addition to the commission described above, we will also pay an advance of $15,000 to StartEngine Primary. This fee will be used for the purposes of undertaking a due diligence and compliance review. In addition, the investors shall pay a cash commission of 3.5% to StartEngine Primary on sales of securities into states in which it is registered.

Escrow Agent

We have entered into an Escrow Services Agreement with Prime Trust LLC (the “Escrow Agent”), which can be found in Exhibit 8.1 to the Offering Statement of which this offering circular is a part. Investor funds will be held by the Escrow Agent pending closing or termination of this offering. All subscribers will be instructed by us or our agents to transfer funds by wire, credit or debit card, or ACH transfer, directly to the escrow account established for this offering.

We may terminate this offering at any time for any reason at our sole discretion. Investors should understand that acceptance of their funds into escrow does not necessarily result in their receiving shares and escrowed funds may be returned.

Prime Trust is not participating as an underwriter or placement agent or sales agent of this offering and will not solicit any investments, recommend our securities, distribute this Offering Circular or other offering materials to investors or provide investment advice to any prospective investor, and no communication through any medium, including any website, should be construed as such. The use of Prime Trust’s technology should not be interpreted and is not intended as an endorsement or recommendation by it of us or this offering. All inquiries regarding this offering or escrow should be made directly to us.

For its services, the Escrow Agent will receive an escrow cash management fee in the amount of 1% of the funds held in escrow prior to any closing, not to exceed $3,400.

No Minimum Offering Amount

The shares being offered will be issued in one or more closings. No minimum number of shares must be sold before a closing can occur. Potential investors should be aware that there can be no assurance that any other funds will be invested in this offering other than their own funds. See “Risk Factors - This Offering is being conducted on a “best efforts” basis and does not require a minimum amount to be raised. As a result, we may not be able to raise enough funds to fully implement our business plan and our investors may lose their entire investment.”

No Selling Shareholders

No securities are being sold for the account of security holders; all net proceeds of this offering will go to us.

Investors’ Tender of Funds

After the Offering Statement has been qualified by the Commission, we will accept tenders of funds to purchase whole shares. We will conduct multiple closings on investments (so not all investors will receive their shares on the same date). Each time we accept funds transferred from the Escrow Agent is defined as a “Closing.” The funds tendered by potential investors will be held by the Escrow Agent and will be transferred to us at each Closing.

Process of Subscribing

You will be required to complete a subscription agreement in order to invest. The subscription agreement includes a representation by the investor to the effect that, if you are not an “accredited investor” as defined under securities law, you are investing an amount that does not exceed the greater of 10% of your annual income or 10% of your net worth (excluding your principal residence).

If you decide to subscribe for the Class B Shares in this offering, you should complete the following steps:

	1.	Go to our page on www.startengine.com/xcraft and click on the “Invest Now” button;
	2.	Complete the online investment form;
	3.	Deliver funds directly by wire, debit card, credit card or electronic funds transfer via ACH to the specified account;
	4.	Once funds or documentation are received, an automated AML check will be performed to verify the identity and status of the investor;
	5.	Once AML is verified, the investor will electronically receive, review, execute and deliver to us a subscription agreement.

Potential investors will have ample time to review the subscription agreement, along with their counsel, prior to making any final investment decision.

StartEngine Primary will generally review all subscription agreements on the same day, but not later than the day after the submission of the subscription agreement and receipt of an investor’s funds, and will not instruct the Escrow Agent to release an investor’s funds, until the investor has provided all required information.

When we request a disbursement through StartEngine's portal, StartEngine will review the disbursement request to confirm that funds can be closed upon and the bank account information is accurate, and then notify the Escrow Agent to release the funds to our bank account.

All funds tendered (by wire, debit card, credit card or electronic funds transfer via ACH to the specified account or deliver evidence of cancellation of debt) by investors will be deposited into an escrow account at the Escrow Agent for the benefit of the company. All funds received by wire transfer will be made available immediately while funds transferred by ACH will be restricted for a minimum of three days to clear the banking system prior to deposit into an account at the Escrow Agent.

We maintain the right to accept or reject subscriptions in whole or in part, for any reason or for no reason, including, but not limited to, in the event that an investor fails to provide all necessary information, even after further requests from the company, in the event an investor fails to provide requested follow up information to complete background checks or fails background checks, and in the event we receive oversubscriptions in excess of the maximum offering amount.

In the interest of allowing interested investors as much time as possible to complete the paperwork associated with a subscription, we have not set a maximum period of time to decide whether to accept or reject a subscription.

If a subscription is rejected, or StartEngine receives a request from us or the investor to cancel the subscription prior to the applicable Closing, as soon as the funds invested have cleared the bank, StartEngine will process the cancelation, and the funds will generally be returned within 10 business days.

Upon acceptance of a subscription, the company will send a confirmation of such acceptance to the subscriber.

Upon confirmation that an investor’s funds have cleared, the company will instruct the Transfer Agent to issue shares to the investor. The Transfer Agent will notify an investor when shares are ready to be issued and the Transfer Agent has set up an account for the investor.

Investor Perks

To encourage participation in the Offering, we are providing specific perks for investors who invest a minimum of $1,000 in this offering. Additional perks, including bonus shares, are available for investments of greater amounts. We are of the opinion that these perks do not have any cash value and do not alter the sales price or cost basis of the securities in this offering. Instead, the perks are a “thank you” to investors that help us achieve our mission. However, it is recommended that investors consult with a tax professional to fully understand any tax implications of receiving any perks before investing. The table below presents the investment level to receive the stated perk:

Investment Amount	Rewards
$1,000-$4,999	`·`Lifetime VIP discount of 10% on all purchases through the xcraft.io website.*
$5,000 - $9,999	`·`Lifetime VIP discount of 10% on all purchases through the xcraft.io website.* `·`5% Bonus Class B Shares. `·`Maverick Drone.**
$10,000 - $24,999	`·`Lifetime VIP discount of 10% on all purchases through the xcraft.io website.* `·`10% Bonus Class B Shares. `·`Custom-designed Maverick Drone.**
$25,000+	`·`Lifetime VIP discount of 10% on all purchases through the xcraft.io website.* `·`15% Bonus Class B Shares. `·`Custom-designed Maverick Drone.** `·`Private zoom call with our chief executive officer and one or more of our high profile supporters.
Products may not be purchased for resale. *Drones expected to be shipped within 8 weeks following the closing of an investor’s investment.

Transfer Agent

We have engaged StartEngine Secure, LLC, a registered transfer agent with the SEC, who will serve as transfer agent to maintain shareholder information on a book-entry basis. A copy of our agreement with StartEngine Secure, LLC can be found at Exhibit 6.1 to the Offering Statement of which this offering circular is a part

Provisions of Note in Our subscription agreement

Exclusive Venue

Our subscription agreement includes a forum selection provision that requires any claim against us based on the subscription agreement not arising under the federal securities laws, to be brought in a court of competent jurisdiction in the State of Idaho. This forum selection provisions may limit investors’ ability to bring claims in judicial forums that they find favorable to such disputes and may discourage lawsuits with respect to such claims. We have adopted this provision to limit the time and expense incurred by its management to challenge any such claims. As a company with a small management team, this provision allows its officers to not lose a significant amount of time travelling to any particular forum so they may continue to focus on our operations.

USE OF PROCEEDS

We estimate that, at a per share price of $7.82, the net proceeds from the sale of the 895,140 Class B Shares in this offering will be approximately $6,583,826, after deducting the estimated offering expenses of approximately $661,168 (including, payment to StartEngine and other Offering expenses).

The table below shows the estimated net proceeds we would receive from this offering assuming the sale of 25%, 50%, 75% and 100% of the Class B Shares we are offering. There is no guarantee that we will be successful in selling any of the Class B Shares we are offering.

	25%	50%	75%	100%
Shares Sold in this Offering	223,785	447,570	671,355	895,140
Gross Proceeds	1,811,249	3,622,497	5,433,746	7,244,995
Offering Expenses(1)	273,292	411,159	531,876	661,168
Net Proceeds	1,537,957	3,211,338	4,901,870	6,583,826
(1) Includes 3.5% commission paid to StartEngine Primary by the investors.

The table below sets forth the manner in which we intend to use the net proceeds we receive from this offering, assuming the sale of 25%, 50%, 75% and 100% of the Class B Shares we are offering. All amounts listed below are estimates.

	25%	50%	75%	100%
R&D and Production	$400,000	$900,000	$1,500,000	$1,800,000
Marketing and Sales	$200,000	$600,000	$1,200,000	$2,300,000
Debt Reduction	$827,000	$827,000	$827,000	$827,000
Working Capital	$110,957	$884,338	$1,374,870	$1,656,826
TOTAL	$1,537,957	$3,211,338	$4,901,870	$6,583,826

We reserve the right to change the above use of proceeds if management believes it is in our best interests.

The allocation of the net proceeds of this offering set forth above represents our estimates based upon our current plans, assumptions we have made regarding the industry, general economic conditions and our future revenues (if any) and expenditures.

Investors are cautioned that expenditures may vary substantially from the estimates above. Investors will be relying on the judgment of our management, who will have broad discretion regarding the application of the proceeds from this offering. The amounts and timing of our actual expenditures will depend upon numerous factors, including market conditions, cash generated by our operations (if any), business developments and the rate of our growth. We may find it necessary or advisable to use portions of the proceeds from this offering for other purposes.

In the event that we do not raise the entire amount we are seeking, then we may attempt to raise additional funds through private offerings of our securities or by borrowing funds. We do not have any committed sources of financing.

OUR BUSINESS

This discussion should be read in conjunction with the other sections of this Offering Circular, including "Risk Factors," "Use of Proceeds," “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and the Financial Statements attached and the related exhibits. The various sections of this discussion contain a number of forward-looking statements, all of which are based on our current expectations and could be affected by the uncertainties and risk factors described throughout this Offering Circular.

Summary

We believe there is a need for quality, American-made drones at cost-competitive prices. We also believe there is a need for advanced technologies to support the upcoming Urban Air Mobility (UAM) space.

Our Business Model

We are heavily R&D-focused Our business model is two-fold: We develop new UAV solutions for customers on a contract basis, and we develop, license and sell our own products.

Business Evolution

We have evolved from a strict product focus to an application focus. We let the market need drive our development. Broadly, we develop autonomous flight solutions for five different verticals:

1.Public Safety/Security

2.Geo-Spatial/Agriculture

3.Energy

4.Government/Military

5.Urban Air Mobility

Sales and Distribution

We generate revenue through two channels – custom development and direct sales. When we develop new technology for a contract customer, we seek to maintain our rights in the designs and other intellectual property so we can produce and sell the end product through other channels. Our primary sales strategy is B2B and B2G(Government) although some B2C still exists.

Our Products

Existing products:

·Shadow – Tethered UAS

·X2Q – Hybrid VTOL

·Maverick -Small tactical ducted-rotor UAS

Products in Developments

·Matrix – Fully Autonomous 2 kg payload UAS and landing “Nest”

·PANADRONE – Fully Autonomous Tethered UAS

·KesTRL – Extended Range Hybrid VTOL

Government Regulation

The UAV industry is new and therefore the regulatory environment is quite fluid. Some regulations exist but the laws continue to evolve.

We have been active in lobbying activities to help ensure favorable laws are adopted.

Intellectual Property

We hold United States trademarks for “xCraft,” “X PlusOne” and “PhoneDrone Ethos,” and have pending trademark applications for “Matrix”, “Aspire” and “PANADRONE”.

We have been issued the following United States patents over various aspects of our technology:

·High Speed VTOL Multirotor Aircraft (Patent No. US 9,994,313)

·UAV With Detachable Computing Device (Patent No. US 9,738,380)

·UAV With Detachable Computing Device (Patent No. US 10,479,500)

We have a pending patent application for a UAV Vehicle Mounted Drone Port, Drone, and Integrated Communication System (Application No. 62/739,472).

Competitors

There are several companies that build and sell competing UAS products. Most notable among them is Chinese-based, DJI. DJI’s products serve mostly the consumer market but also several key verticals in the commercial space including public safety and cinematography. DJI has recently struggled to overcome a broad distrust, especially in US and (Non-Chinese) government markets over security and privacy issues. We see this as an opportunity to capitalize since our products are developed and manufactured in the USA.

Another, more direct US competitor is Skydio. Skydio builds UAS products with advanced obstacle avoidance and image tracking capability. These vehicles serve a target niche in the consumer and public safety space. Other competitors include France-based Parrot, AeroVironment, and Birds Eye View Robotics. See “Risk Factors - We face significant market competition.”

Employees

We currently employ 3 full-time and 3 part-time employees as well as several contractors.

Property

We lease approximately 2,700 square feet of office space at 418 E Lakeside, STE 08, Coeur d’Alene, Idaho, 83814. We have a month-to-month lease. Our monthly rent is $1,000 through June 2020, and $2,750 thereafter.

Legal Proceedings

We are not involved in any litigation, and our management is not aware of any pending or threatened legal actions relating to our intellectual property, conduct of our business activities, or otherwise.

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Overview

We were formed as an Idaho limited liability company named Xcraft Enterprises, LLC, on September 23, 2014, and converted into a Delaware corporation on February 28, 2017. Our headquarters are located in Coeur d’Alene, Idaho. We manufacture and market drones for both recreational and commercial use.

Results of Operation

Revenue

For the fiscal year ending December 31, 2019, our revenue was $680,677, compared to $1,051,970 for the fiscal year ending December 31, 2018. The decrease in revenue during 2019, is primarily attributable to the loss of a significant customer.

Cost of Sales

For the fiscal year ending December 31, 2019, our cost of sales was $13,458, compared to $31,081for the fiscal year ending December 31, 2018. The increase in cost of sales for the fiscal year ending December 31, 2019, primarily resulted from our increase in revenue.

Gross Profit

For the fiscal year ending December 31, 2019, our gross profit was $667,219, compared to $1,020,889 or the fiscal year ending December 31, 2018. The decrease in gross profit for the fiscal year ending December 31, 2019, primarily resulted from our decrease in revenue.

Operating Expenses

Our operating expenses consist of general and administrative expenses, sale and marketing expenses, and research and development expenses. For the fiscal year ending December 31, 2019, our operating expenses were $1,414,590, including, $1,153,711 for general and administrative expenses, $97,583 for sales and marketing expenses, and $163,215 for research and development expenses. For the fiscal year ending December 31, 2018, our operating expenses were $1,272,069, including, $1,096,495 for general and administrative expenses, $32,035 for sales and marketing expenses, and $143,539 for research and development expenses.

Operating Loss

Our net operating loss for the fiscal year ending December 31, 2019, was $747,290, compared to $251,180 for the fiscal year ending December 31, 2018. The increase in operating loss for the fiscal year ending December 31, 2019, is primarily the result of a decrease in revenue and an increase in sales and marketing expenses.

Liquidity and Capital Resources

Since our inception, we have raised over $2,000,000 through various securities offerings, which we have used for operations. As of December 31, 2019, we had $33,392 in cash, compared to $30,823 as of December 31, 2018. We have also financed our operations through various insider loans and credit lines. As of July 1, 2020, and excluding the proceeds of this offering, we have sufficient operating capital for approximately 3 months.

We will incur significant additional costs in developing products, and in production, marketing, sales and customer service, and intend to continue to fund our operations through funds received from our recent Regulation Crowdfunding campaign, funds received through this offering, and additional debt and/or equity financing as determined to be necessary. If we are unable to obtain sufficient amounts of additional capital, we may be required to

reduce the scope of our planned development, which could harm our business, financial condition and operating results.

Debt

In December 29, 2016, in exchange for a $25,000 loan, we issued a third party a promissory note in the principal amount of $25,000 which accrues interest at a rate of 5% per annum, and is due December 31, 2020. As of December 31, 2019, there was an aggregate of $29,479 in principal and interest outstanding under the note. As of July 1, 2020, there was an aggregate of $30,177 in principal and interest outstanding under the note.

On February 6, 2018, we obtained a $250,000 loan with Innovate Washington. The loan has a two year term and a variable interest rate based on the Wall Street Journal published daily rate, plus 5% adjusted on a quarterly basis. We make monthly interest only payments of $1,314.63. As of December 31, 2019, the loan had an outstanding balance of $215,219, and as of July 1, 2020, the balance due under the loan was $185,000. The loan is collateralized by a security interest on all of our assets.

We have an outstanding promissory note with First Interstate Bank, that accrues interest at a rate of 6.25%, and matures on June 15, 2021. As of December 31, 2019, $16,017 was outstanding under the note and as of July 1, 2020, $9,742 was outstanding under the note.

We have a credit facility with US Bank. The advances incur interest at the Wall Street Journal prime rate plus 5% per annum. The principal balance of all advances, together with all accrued but unpaid interest on such advances and all outstanding fees and charges, are payable on demand. The line of credit is secured by an interest in all of our depository accounts, cash and any other property held by US Bank. In addition, our chief executive officer, guaranteed the line of credit. As of December 31, 2019, the balance due under this line of credit was $42,290.

We have received a loan in the amount of $111,000 from the Small Business Association pursuant to the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”), which accrues interest at a rate of 1% per annum. We believe we will qualify for forgiveness of the entire loan pursuant to the CARES Act.

Plan of Operations

Throughout 2020, we intend to continue to focus on completing our prototypes and commercializing our drones. The table below outlines our significant goals for the next 12 months, which we anticipate will require approximately $910,000 in addition to our current cash on hand, to complete.

Estimated Completion Date	Milestone	Estimated Cost

Q3- 2020	`·`Deliver Panadrone Alpha Prototype System	$95,000
·
Q4-2020	`·`Complete Matrix UAS Development	$120,000
·
Q1-2021	`·`Complete Krestrel VTOL UAS Development	$235,000
·
Q2-2021	`·`Enter into first military contract	$450,000

The extent to which we will be able to complete the milestones outlined above is dependent upon the funds raised in this offering. If we do not raise a sufficient amount of funds in this offering, we may not incur all the costs or complete all the milestones outlined above.

DIRECTORS, EXECUTIVE OFFICERS AND SIGNIFICANT EMPLOYEES

The following table sets forth information about our executive officers and directors.

Name	Position	Age	Term of Office	Approximate Hours per week for part-time employees

JD Claridge	President, Chief Executive Officer, Chief Financial Officer, Treasurer, Secretary and Director	42	February 2017 – Present	Full Time

Elbert L. Rutan	Director	78	October 2019 – Present	N/A

Ben Toews	Director	43	July 2018 – Present	N/A

There are no arrangements or understandings between our executive officers and directors and any other persons pursuant to which the executive officer or director was selected to act as such.

JD Claridge, has served as our President, Chief Executive Officer, Chief Financial Officer, Treasurer, and Director since February 2017, and prior thereto, served as the manager of our predecessor-in-interest, XCraft Enterprises, LLC, since its founding in September 2014. As a certified pilot, electrical engineer, airframe mechanic, and Designated Engineering Representative (DER) for the FAA, Mr. Claridge has held key engineering roles at several aerospace OEMs. In February 2013, he founded Aero Designworks, LLC, an aerospace consulting firm providing FAA designated engineering representative services for electrical systems, where he served as President and managing member between February 2013 and December 2018.

Elbert L. Rutan, has served as a director since October 2019. Mr. Rutan has founded two aircraft research firms, and has developed a large variety of groundbreaking aerospace projects, showcasing some of the most innovative and energy-efficient designs ever flown. Time Magazine named him one of the top 100 most influential people of 2005. Described by Newsweek Magazine as “the man responsible for more innovations in modern aviation than any living engineer,” Mr. Rutan is an aircraft designer with a vision for the advancement of technology. In 2004, Mr. Rutan joined a highly distinguished company of innovators as the designer/developer of SpaceShipOne, the world’s first privately built manned spacecraft to reach space. Mr. Rutan won the $10 million Ansari X Prize, a competition created to spur the development of affordable space tourism. He is the winner of the Presidential Citizen’s Medal, the Charles A. Lindbergh Award, and is a two-time individual winner of the Robert J. Collier Trophy, awarded by the National Aeronautic Association for significant advances in aviation. Mr. Rutan participated in the design and development of the first aircraft to circle the world non-stop without refueling. Repeating that feat, his company developed the GlobalFlyer, which broke the Voyager’s record time for a non-refueled, solo flight around the world. His company also developed the Ultralite, an all-composite 100 mile-per-gallon show car for General Motors.

Ben Toews has served as a director since July 2018. Since 2012, Mr. Toews has served as President and CEO of Bullet Tools, a developer and manufacturer of innovative construction solutions which sells products around the world. He also serves on the advisory board for the Idaho Small Business Development Center. Since 2012, Mr. Toews has served as Treasurer for Heart of the City Church, and since 2013, he has served as a Board Advisor for the Idaho Small Business Development Center. He is a graduate of Gonzaga University where he majored in Business Administration with a concentration in International Business.

We have the following advisory board members:

John Overby, manages the Tech Accelerator Program at Ignite Northwest. John was the first entrepreneur to start two back-to-back INC 500 companies (#13 followed by #104). He is a seasoned technology entrepreneur and former regional director of the North Idaho Small Business Development Center. He has served on many university and company boards over the years. His passion is helping high-tech entrepreneurs to rapidly build their companies in the Inland Northwest.

Nick Smoot, has founded and sold 3 technolgoy companies. Now, as the founder of Innovation Collective and Mountain Man Ventures (VC fund), he is focused on redefining how cities participate in the global economy. He is a Milken Institute Young Leader and is a member of the Young Entrepreneur Council. Mr. Smoot has been interviewed for or contributed to Bloomberg, Forbes, USA Today, Fast Company, Mashable, Virgin, LinkedIn, Inc. Magazine and Huffington Post.

Dan Franco, is a Managing Member at Airborne Tactical Solutions. He served 21 years in US Army aviation including with the 160th Special Operations Aviation Regiment, aka “Night Stalkers”. After retirement Mr. Franco served as a director at Northrop-Grumman for thirteen (13) years, followed by creating two successful aerospace companies. His hallmark is building teams/companies that synchronize leadership and technology with patriotism for the advancement of the US aerospace industry. Mr. Franco supports numerous veterans causes and volunteers with the Civil Air Patrol as a Cadet Programs Leader.

Mark Collins, is nationally recognized for his 50+ years of service in health care and technology. He served as CEO for three corporations, followed by 22 years in executive search. In the latter role, Mr. Collins was a senior partner in Korn/Ferry International, earning the firm’s Global Client Satisfaction award. After Korn/Ferry, he built his own company in executive search and consulting. He is highly skilled in coaching business leaders and building teams.

COMPENSATION OF DIRECTORS AND EXECUTIVE OFFICERS

The table below reflects the annual compensation of JD Claridge, our only paid executive officer or director, during the fiscal year ended December 31, 2019:

Name

Capacities in which
compensation received

Cash Compensation

Other
Compensation

Total

Compensation

JD Claridge
418 Lakeside Avenue, Suite 8

Coeur d’Alene, ID. 83814

Chief Executive Officer, Chief Financial Officer, Secretary and Director

171,250 (1)

171,250

(1)Represents annualized base salary of $165,000 for January through July 2019 ($96,250), and $180,000 for August through December 2019 ($75,000).

The directors do not receive any compensation for their service as directors.

We are party to an Employment Agreement dated August 1, 2017, with JD Claridge, which can be found in Exhibit 6.3 to the Offering Statement of which this offering circular is a part. The Employment Agreement terminates on July 31, 2020. Upon expiration of the term, Mr. Claridge’s employment will convert to at-will, unless the term is extended or we enter into a new employment agreement with Mr. Claridge. Under the Employment Agreement, Mr. Claridge receives an annual base salary of $180,000, and is entitled to receive annual performance bonuses upon the achievement of performance milestones to be agreed upon by the Board of Directors, however, no bonuses have been declared or paid to date. If Mr. Claridge’s employment is terminated during the term as a result of death or disability, he or his heirs shall receive his base salary over the following six months. If there is a change of control during the term, and Mr. Claridge is terminated, without cause, or terminates his employment for good reason, before the earlier to occur of the first anniversary following the change in control and the expiration of the term of the agreement, Mr. Claridge shall be entitled to receive a lump sum severance payment equal to 3 years base salary.

SECURITY OWNERSHIP OF MANAGEMENT AND CERTAIN SECURITY HOLDERS

Set forth below is information regarding the beneficial ownership of our outstanding Class A Shares (which are our only voting securities) as of July 1, 2020, by (i) each person whom we know owned, beneficially, more than 10% of the outstanding Class A Shares, and (ii) all of the current officers and directors as a group. We believe that, except as noted below, each named beneficial owner has sole voting and investment power with respect to the shares listed. Unless otherwise indicated herein, beneficial ownership is determined in accordance with the rules of the Securities and Exchange Commission, and includes voting or investment power with respect to shares beneficially owned.

Title of class	Name and address of beneficial owner	Amount and nature of Beneficial ownership		Amount and nature of beneficial ownership acquirable		Percent of class
Class A Common Stock	JD Claridge 418 Lakeside Avenue, Ste 8 Coeur d’Alene, ID. 83814		2,333,007		300,000(1)		68.81	%

Class A Common Stock	Charles F. Manning 418 Lakeside Avenue, Ste 8 Coeur d’Alene, ID. 83814		442,847				12.56	%

Class A Common Stock	All directors and officers as a group (3 persons)		3,189,257		330,000(2)		90.44	%

______________________

(1)Shares issuable pursuant to an option having an exercise price of $1.70 per share, all of which are exercisable.

(2)Includes 300,000 shares issuable pursuant a fully vested option having an exercise price of $1.70 per share, and 30,000 shares issuable pursuant to a fully vested option having an exercise price of $3.56 per share.

INTERESTS OF MANAGEMENT AND OTHERS IN CERTAIN TRANSACTIONS

During 2016, JD Claridge, our sole officer and a director, loaned XCraft Enterprises, LLC, our predecessor-in-interest, an aggregate of $18,757 for operational expenses. These advances did not accrue interest and were due on demand. All amounts were repaid in July 2017.

In December 2016, Philip Burks a stockholder and former director, provided XCraft Enterprises, LLC, with a $100,000 revolving line of credit pursuant to a Revolving Loan Agreement, having an interest rate of 6.5% per annum, which line of credit was secured by 200,000 Class A Shares owned by Mr. Claridge. In May 2019, Mr. Burks, provided us with a $50,000 revolving line of credit pursuant to Revolving Loan Agreement, having an interest rate of 6.5% per annum, which line of credit was secured by one of our then pending patent applications. We drew various amounts down from such credit lines and settled them pursuant to the Settlement Agreement described below.

On June 22, 2017, we issued Charles F. Manning a warrant to purchase one Class A Share for every four shares of our common stock that become issued and outstanding as a result of the exercise of stock options or warrants awarded from any option pool authorized by us. The maximum number of shares underlying the option is 200,000, and the warrant has an exercise price of $0.01 per share. At the time the warrant was issued, Mr. Manning was a director and holder of over 10% of our outstanding common stock.

On July 31, 2017, we loaned $86,000 to Mr. Claridge, in exchange for a non-interest bearing promissory note, which was amended on July 26, 2018, to include interest at a rate of 2% per annum commencing July 31, 2017. All principal and accrued interest under note is due on December 31, 2022. As of July 1, 2020, $67,467 in principal and interest was outstanding under the note.

In February 2018, we entered into an Operating Agreement and Contribution Agreement with Phirst Technologies, LLC, a Texas limited liability company, pursuant to which we contributed one of our provisional patent applications in exchange for a 25% ownership interest in Phirst. At the time the agreements were entered into, Mr. Burks, was one of our directors, and a manager and the beneficial owner of over 20% of the membership interests of Phirst. On March 1, 2018, we entered into an engineering agreement with Phirst, pursuant to which we were to receive $750,000 from Phirst, upon the achievement of certain milestones related to the manufacturing, delivery and testing of drone products. As of August 31, 2018, we had received $450,000 in payments from Phirst, however, certain disputes arose between us, on the one hand, and Mr. Burks and Phirst, on the other hand, related to the agreement and the amounts outstanding under the credit lines extended to us by Mr. Burks. In February 2020, we entered into a Confidential Settlement Agreement and General Release with Phirst and Mr. Burks, pursuant to which in exchange for mutual releases of claims, we assigned our ownership interest in Phirst to Mr. Burks, Mr. Burks forgave all outstanding amounts due under the revolving loan agreements, and Mr. Burks and Phirst paid us $22,533.08.

In August 2017, we entered into an Employment Agreement with JD Claridge, which can be found in Exhibit 6.3 to the Offering Statement of which this offering circular is a part. The Employment Agreement terminates on July 31, 2020. Upon expiration of the term, Mr. Claridge’s employment will convert to at-will, unless the term is extended or we enter into a new employment agreement with Mr. Claridge. Under the Employment Agreement, Mr. Claridge receives an annual base salary of $180,000, and is entitled to receive annual performance bonuses upon the achievement of performance milestones to be agreed upon by the Board of Directors, however, no bonuses have been declared or paid to date. If Mr. Claridge’s employment is terminated during the term as a result of death or disability, he or his heirs shall receive his base salary over the following six months. If there is a change of control during the term, and Mr. Claridge is terminated, without cause, or terminates his employment for good reason, before the earlier to occur of the first anniversary following the change in control and the expiration of the term of the agreement, Mr. Claridge shall be entitled to receive a lump sum severance payment equal to 3 years base salary.

SECURITIES BEING OFFERED

In this offering, we are offering to investors Class B Common Stock.

Our authorized capital stock consists of (a) 12,000,000 shares of common stock, having a par value of $0.0001 per share, of which 5,000,000 shares are designated as “Class A Voting Common Stock” (the “Class A Shares”), 5,000,000 shares are designated as “Class B Non-Voting Common Stock” (the “Class B Shares,” and sometimes together with the Class A Shares, the “Common Stock”), and (b) 2,000,000 shares of blank check preferred stock, none of which have been authorized for issuance. As of July 1, 2020, we had 3,526,250 Class A Shares outstanding, and 944,474 Class B Shares outstanding.

The rights of holders of our Common Stock are governed by our Certificate of Incorporation. Our Certificate of Incorporation may be amended by our Board and by the vote of the holders of a majority of the outstanding Class A Shares, to increase the number of authorized shares of Common Stock, or the authorized number of shares of any class of Common Stock and there is no limit on the number of shares of Common Stock, or any class of Common Stock, that may be authorized and issued. The Board of chief executive officers, with the approval of the holders of the Class A Shares, may also amend the Certificate of Incorporation to create one or more series of preferred stock that have rights, preferences and privileges senior to the rights, preferences and privileges of the Common Stock.

The holders of Common Stock, regardless of class, will be entitled to receive pro rata dividends, if any, declared by our Board out of legally available funds, based on the number of shares of Common Stock that they hold, bears to the total number of outstanding shares of Common Stock, however, subject to any preferential right of the holders of any preferred stock that may be authorized and issued in the future. Upon liquidation, dissolution or winding-up, the holders of our Common Stock are entitled to share ratably in all assets that are legally available for distribution, however, subject to any preferential right of the holders of any preferred stock that may be authorized and issued in the future.

The holders of Class A Shares are entitled to one vote per share. The holders of Class B Shares have no voting rights, except as provided under Delaware law, which include the right to vote on an amendment to our Certificate of Incorporation if the amendment would increase or decrease the par value of the Class B Shares, or alter or change the powers, preferences, or special rights of the Class B Shares, so as to affect them adversely.

The holders of our Common Stock have no preemptive, subscription, redemption or conversion rights.

Exclusive Venue

Our subscription agreement includes a forum selection provision that requires any claim against us based on the subscription agreement not arising under the federal securities laws, to be brought in a court of competent jurisdiction in the State of Idaho. This forum selection provisions may limit investors’ ability to bring claims in judicial forums that they find favorable to such disputes and may discourage lawsuits with respect to such claims. We have adopted this provision to limit the time and expense incurred by its management to challenge any such claims. As a company with a small management team, this provision allows its officers to not lose a significant amount of time travelling to any particular forum so they may continue to focus on our operations.

Part III

EXHIBITS

1.0	Posting Agreement with StartEngine Crowdfunding, Inc.*

2.1	Certificate of Incorporation*

2.2	Amended and Restated Certificate of Incorporation*

2.3	Bylaws*

4.1	Form of Subscription Agreement*

6.1	StartEngine Secure Services Agreement*

6.2	Services Agreement with StartEngine Crowdfunding, Inc.*

6.3	Employment Agreement with JD Claridge*

8.1	Escrow Services Agreements*

11.1	Consent of BAS Partners*

12.1	Opinion of Alliance Legal Partners, Inc.*

*Filed herewith

SIGNATURES

Pursuant to the requirements of Regulation A, the issuer certifies that it has reasonable grounds to believe that it meets all of the requirements for filing on Form 1-A and has duly caused this offering Statement to be signed on its behalf by the undersigned, thereunto duly authorized, in the City of Coeur d’Alene, State of Idaho, on July 27, 2020.

XCRAFT ENTERPRISES, INC.

/s/ JD Claridge

Title:

Chief Executive Officer, Principal
Executive Officer, Chief Financial Officer,

Principal Financial Officer, Principal

Accounting Officer and Director

/s/ Ben Toews
Ben Toews, Director

/s/ Elbert L. Rutan
Elbert L. Rutan, Director

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 2 — SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

Product Warranty Costs

The Company provides 30 day warranties only to ensure its products are free from defects in material or workmanship and is subject to the Company's return policy. We also provide an optional 6-month extended warranty on the motor. In estimating its future warranty obligations, the Company considers various relevant factors, including the Company's stated warranty policies and practices, the historical frequency of the claims and the cost to replace or repair its products under warranty. Historically, extended warranty sales have been negotiable, warranty costs have been minimal and the related expense has been recorded at the time the warranty service is performed; accordingly, no warranty reserve has been recorded at December 31, 2019 and 2018.

Accounting for Convertible Notes and Securities with Beneficial Conversion Features

The Company reviews the terms of convertible debt and equity instruments it issues to determine whether there arc derivative financial instruments, including an embedded conversion option that is required to be bifurcated and accounted for separately as a derivative financial instrument. In circumstances where a host instrument contains more than one embedded derivative instrument, including a conversion option, that is required to be bifurcated, the bifurcated derivative instruments are accounted for as a single, compound derivative instrument. The discount from the face value of the convertible debt, together with the stated interest on the instrument, is amortized over the life of the instrument through periodic charges to interest expense, using the effective interest method.

Revenue Recognition

The Company recognizes revenue related to sales of products (i) persuasive evidence of an arrangement exists. (ii} delivery has occurred or services have been rendered to the customer, (iii) the fee is fixed or detem1inable. and (iv) collectability is reasonably assured. The Company typically records revenues when the product is shipped to the customer. Taxes collected from customers and remitted to governmental authorities are presented in the statements of operations on a net basis .

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 2 — SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

Revenue Recognition (Continued)

Revenue recognition is deferred in all instances where the earnings process is incomplete based on the criteria listed above. Management provides for sales returns and allowances in the same period as the related revenues are recognized. Management bases their estimates on historical experience.

The Company has undertaken various pre-sale crowd funding campaigns and pre-sales through the Company's website. The pre-sale of our products through a crowd funding campaign or our website are deferred until the related product is shipped For the years ended December 31, 2019 and 2018, the Company deferred $536,722 and $537,841, respectively of such pre-sales and included this in deferred revenue in the accompanying balance sheets.

Shipping and Handling Costs

Costs incurred for shipping and handling are included in cost of sales at the time the related revenue is recognized. Amounts billed to a customer for shipping and handling are reported as an increase in revenue.

Advertising

The Company expenses the cost of advertising and promotions as incurred. Advertising expenses for the years ended December 31, 2019 and 2018 was $20,412 and $32,035.

Research and Development

We incur research and development costs during the process of researching and developing our technologies and future offerings. Our research and development costs consist primarily of third-party product design consultants. We expense these costs as incurred until the resulting product has been completed, tested, and made ready for commercial use.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 2 — SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

Stock Based Compensation

The Company accounts for stock options issued to employees under ASC 718 Share-Based Payment. Under ASC 718, share-based compensation cost to employees is measured at the grant dale. based on the estimated fair value of the award. and is recognized as expense over the employee's requisite vesting period. The fair value of each stock option or warrant award is estimated on the dale of grant using the Black -Scholes option valuation model.

The Company measures compensation expense for its non-employee stock-based compensation under ASC 505 Equity. The fair value of the option issued or committed to be issued is used to measure the transaction, as this is more reliable than the fair value of the services received. The fair value is measured at the value of the value of the Company's common stock, option, or warrant on the date that the commitment for performance by the counterparty has been reached or the counterparty's performance is complete. Stock-based compensation totaling $0 and $294,828 was included in general and administration expense for the years ended December 31, 2019 and 2018, respectively.

Income taxes

The Company will be taxed as a corporation. Accordingly, the Company applies ASC 740 Income Taxes ("AS C 740"). Deferred income taxes are recognized for the tax consequences in future years of differences between the tax bases of assets and liabilities and their financial statement reported amounts at each period end, based on enacted tax laws and statutory tax rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established, when necessary, to reduce deferred tax assets to the amount expected to be realized. The provision for income taxes represents the tax expense for the period, if any and the change during the period in deferred tax assets and liabilities.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 2 — SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

Income taxes (continued)

ASC 740 also provides criteria for the recognition, measurement, presentation and disclosure of uncertain tax positions. A tax benefit from an uncertain position is recognized only if it is "more likely than not" that the position is sustainable upon examination by the relevant taxing authority based on its technical merit.

The Company is subject to U.S . Federal, state and local income tax examination ns by tax authorities for all periods since Inception . The Company currently is not under examination by any tax authority.

Concentration of Credit Risk

The Company maintains its cash with a major financial institution located in the United States of America which it believes to be credit worthy. Balances are insured by the Federal Deposit Insurance Corporation up to $250,000. At rimes, the Company maintains balances in excess of the federally insured limits.

The Company had one customer that made up 92% of revenue in 2019 and 2018. Because the Company is focused on commercial applications in the future and not retail applications which make up these concentrations, the Company does not believe the loss of one or more of these customers will have a material impact on the Company.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 2 — SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

Recent Pronouncements

In February 2016, the Financial Accounting Standards Board (“FASB”) issued an accounting standards update (ASU) issued ASU 2016-02, Leases (Topic 842), which provides guidance for accounting for leases. The new guidance requires companies to recognize the assets and liabilities for the rights and obligations created by leased assets. The accounting guidance for lessors will remain relatively largely unchanged. In January 2018, the FASB issued ASU 2018-01, Leases (Topic 842), which provides an optional transition practical expedient for the adoption of ASU 2016-02 that, if elected, would not require an organization to reconsider their accounting for existing land easements that are not currently accounted for under the old leases standard and clarify that new or modified land easements should be evaluated under ASU 2016-02, once an entity has adopted the new standard. ASU 2016-02 and ASU 2018-01 are effective for annual and interim periods beginning after December 15, 2018. Early adoption is permitted. Management is currently evaluating the effect the adoption of this amendment will have on the financial statements.

Fair Value Measurements

The Company reports its fair value measures using a three-level hierarchy that prioritizes the inputs used to measure fair value. This hierarchy, established by GAAP, requires that entities maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. The three levels of inputs used to measure fair value are as follows:

·Level 1. Quoted prices for identical assets or liabilities in active markets to which the organization has access at measurement date.

·Level 2. Inputs other than quoted prices included in level 1 that are observable for the asset or liability, either directly or indirectly. Level 2 inputs include:

I.quoted prices for similar assets or liabilities in active markets;

II.quoted prices for identical or similar assets in markets that are not active;

III.observable inputs other than quoted prices for asset or liability (for example, interest rates and yield curves); and

IV.inputs derived principally from, or corroborated by, observable market data by correlation or by other means.

·Level 3. Unobservable inputs for asset or liability. Unobservable inputs should be used to measure the fair value to the extent that observable inputs are not available.

When available the Company measures fair value using level 1 inputs because they generally provide the most reliable evidence of fair value. The primary use of fair value measures in the financial statements is the initial measurement of cash and cash equivalents, accounts receivables, fixed assets and long lived assets.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 3 — FIXED ASSET

	2019	2018

Furniture and fixtures	$ 11,335	$ 4,696
Computers and software	22,454	22,454
Demo units	18,073	18,032
Tolls and equipment	34,524	34,524
Marketing displays	6,168	6,168
Total Fixed Asset	92,554	85,874
Accumulated Depreciation	(64,237)	(52,015)
	$ 28,317	$ 33,859

Depreciation expense for the years ended December 31, 2019 and 2018 was $12,222 and $12,222.

NOTE 4 — DEBT

Convertible Note

In March 2016, the Company received $300.000 in proceeds from a Convertible Note (" Convertible Note").The Convertible Note bore interest at I0%, compounded annually, and matured in two years. The Convertible Note had automatic and optional conversion terms. The optional conversion term allowed the holder to convert as specified per the agreement any time after the maturity date. The automatic conversion terms were based on the next qualified round in an equity financing. In February 2017, the holder of the Note agreed to convert the Note (plus accrued interest of $26,250) totaling $326,250 into 3,263 LLC units which converted to 326,250 shares of common stock upon conversion. There were no convertible note for the years ended December 31, 2019 and 2018.

Promissory Note

On June 30, 2017. the Company entered into a promissory note with a bank with a principal amount of $35,000 at 6.25% interest per annum with the balance and accrued interest due upon maturity of June 15, 2018. This loan was used to satisfy the balance on the line of credit for which was with the same bank. On June 12, 2018. the maturity date was extended to June 15, 2021 with monthly payments of $913. As of December 31, 2019 and 2018, $10,956 and $10,956 of this note is classified as short and long-term. respectively.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 4 - DEBT (CONTINUED)

Revolving Loan Agreement

On December 28, 2017, the Company entered into a revolving loan agreement in which the lender agrees to lend a sum up to $100,000 from time-to-time. The unpaid principal amount of an advance shall bear interest prior to its scheduled maturity date at the prevailing market rate as agreed upon between the Lender and Borrower at the time of the Advance, 6.5% at December 31, 2017. Interest prior to the scheduled maturity date shall accrue monthly on the last day of each calendar month commencing with the first of such dates to occur after the funding date and continuing until the scheduled maturity date. This agreement shall terminate on December 31, 2018. In June of 2018, the Company received its first funds of $50,000 from this revolving loan. The revolving loan is secured by 200,000 of the Chief Executive Officers shares of Class A Common Stock common stock. As of December 31, 2019 and 2018, the company has received $150,000 and $100,000 of this revolving loan respectively.

Line of Credit

In March 2017, the Company entered into a line of credit agreement with a financial institution. The advances incur interest at the Wall Street Journal prime rate plus 5% per annum. (4.5% at December 31, 2019 and 2018). The principal balance of all advances, together with accrued but unpaid interest on such advances and all outstanding fees and charges, shall be payable on demand. This line of credit is secured by an interest in all of the Company's depository account balances, cash and any other property now or hereafter in the possession of or under the control of the financial institution. In addition, the Company's CEO is guarantor under the line of credit. As of December 31, 2019 and 2018, the balance for this line of credit was $42,290 and $40,999, respectively.

On February 6, 2018, the Company entered into a working capital loan for the amount of $250,000 with a term of two years and a variable interest rate based on the Wall Street Journal published daily rate plus 5% adjusted on a quarterly basis and fees of $3,750 due at closing. The loan was collateralized by a perfected second lien interest on all Company assets. The Company has drawn on all funds related to this loan. As of December 31, 2019 and 2018, the loan has outstanding balance of $215,219 and $237,133, respectively.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 5 - COMMITMENTS AND CONTIGENCIES

Building Lease and Sublease

On June 29, 2017, the Company entered into a lease agreement for commercial space. The term of the lease is two years commencing on October 1, 2017. The monthly base rent is $1,500 for months 1-12 and $2,726 for months 13-24. The Company also agreed to deposit the first and last month of rent in the nonrefundable amount of $4,226. As of December 31, 2019 and 2018, the future minimum lease payments relating to rent on this building are $21,804 and $21,804, respectively. Rent expense was $21,487 and $21,725 for the years ended December 31, 2019 and 2018, respectively.

Employment Agreement

Effective August 1, 2017, the Company entered into an agreement with the Company's Chief Executive Officer granting him an option to purchase 100,000 shares of common stock. He shall receive an option to purchase an additional 100,000 shares on August 1. 2018 and an additional 100,000 shares on August 1, 2019. Each tranche of options will have a ten (10) year life and vest monthly over a 1-year period. The initial option was granted at an exercise price of $l.70 per share. Each subsequent option shall be at the price per share of the most recent issuance of Company stock to a third-party . The option agreement will provide that if there is a change in control then all options will become fully vested immediately prior to the change in control. In the event of a change in control or termination, the Chief Executive Officer is entitled to severance pay in one lump sum. in cash. no later than the tenth (10th ) day following termination, in an amount equal to three (3) times the base salary then in effect.

On January 17, 2018 the Company entered into a technology, license manufacture and co-branding agreement for a term of two years and shall automatically renew for an additional 1 year term unless terminated. The agreement calls for the purchase of product at a to be agreed upon price as well as provides for licensing fees to the Company for use of their technology.

On February 1, 2018, the Company entered into a contribution agreement to acquire 25% interest of the membership interest of Phirst Technologies, LLC. The Company contributed all of its ownership interest in certain specified assets and services per the agreement in exchange for its membership interest.

On March 1, 2018, the Company entered into a non-recurring engineering agreement and purchase order commitment with Phirst Technologies, LLC. The Company is to receive a total of $750,000 if it meets certain milestones.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 6 - STOCKHOLDERS' DEFICIT

Conversion of Limited Liability Company to Corporation

Pursuant to the Company's becoming a Delaware corporation effective 1, 2017, the Company had a total of 75,000,000 shares of authorized stock, with a par value $0.0001 of per share. The founders of the LLC received 3,000,000 shares of Class A Common Stock based on their pro-rata ownership in the LLC of 30,000 units.

Conversion of Limited Liability Company to Corporation (Continued)

On June 17, 2017, the Company filed amended and restated the articles of incorporation with the state of Delaware. The amended and restated articles designated that out of the 75,000,000 shares of stock authorized to be issued by the Company, 15,000,000 shares will be Preferred Stock, par value $0.0001 per share, 40,000,000 shares will be designated Class A Voting Common Stock, par value $0.0001 per share, and 20,000,000 shares shall be designated Class B Non-Voting Common Stock, par value $0.0001 per share. Except for voting rights, Class A and Class B Common Stock have identical rights and preferences.

On July 27, 2018, the Company filed a second amended and restated articles of incorporation with the state of Delaware. The second amended and restated decrease the number of shares of stock authorized to be issued by the Company to be issued by the Company to 12,000,000 consisting of 2,000,000 shares of Preferred Stock, par value $0.0001 per share, 5,000,000 shares of Class A Common Stock (..Class A Common Stock'"), par value S0.0001 per share and 5.000.000 shares of C lass B Non-Voting Common Stock ('"C lass B Common Stock"), par value $0.0001 per share. The Class A Common Stock shall be entitled to one vote for each share on each matter voted on at the shareholders' meetings, and, except as may be otherwise required by applicable law, the Class B Common Stock shall have no voting rights and is not entitled to vote separately on a plan of merger or a plan of conversion. Except for voting rights. Class A and B Common Stock have identical rights and preferences.

Common Stock Issuance and Sale of LLC Units

On February 14, 2017, the Company received $200,000 in proceeds from a third-party in exchange for 2,000 LLC units which converted to 200,000 shares of Class A Common Stock on March 1, 2017.

During 2017, the Company issued 17,928 shares of Class B Common Stock as compensation valued at $1.70 per share. These shares were issued for services to both an outside vendor and employees . The Company valued the common stock based on the most recent sales of common stock to third parties.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 6 - STOCKHOLDERS' DEFICIT (CONTINUED)

Common Stock Issuance and Sale of LLC Units (continued)

The Company commenced a Regulation Crowd funding offering through StanEnginc, a funding portal registered with the US Securities and Exchange Commission (SEC) and a member of the Financial Industry Regulatory Authority (FINRA). The Company sold 629,411 Class B Common Stock for gross proceeds of $1,069,999. Offering costs related to this raise were $144,211. In 2018 the Company sold 300,076 Class B Common Stock for gross proceeds of $1,068,271.

Equity Incentive Plan

On February 28, 2017, the Company authorized the 2017 Equity Incentive Plan ( which may be referred to as the '"Plan"). The Company reserved 600,000 shares of its Class A Common Stock pursuant to the Plan. which pro, des for the grant of shares of stock options. stock appreciation rights, and stock awards (performance shares) to employees, non-employee directors, and non-employee consultants. The option exercise price generally may not be less than the underlying stock's fair market value at the date of the grant and generally have a term of four years. The amounts granted each calendar year to an employee or nonemployee is limited depending on the type of award. As of December 31, 2019 and 2018, 107,500 shares are still available to be issued under the Plan.

Stock Options

The Company granted 272,000 stock options under the Plan to various employees with a total grant date fair value of approximately $369,208. The granted options had an exercise price of $l.70, expire in ten years, and ranged from 1 year vesting, to vesting over a five-year period. The stock options were valued using the Black-Scholes pricing model with a range of inputs indicated below:

	December 31, 2019	December 31, 2018

Expected Life (years)	5.5-6.5%	5.5-6.5%
Risk-free interest rate	2.45-2.87%	2.45-2.87%
Expected volatility	75%	75%
Annual dividend yield	0%	0%

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 6 - STOCKHOLDERS' DEFICIT (CONTINUED

Stock Options

The risk free interest rate assumption for granted is based upon observed interest rates on the United States government securities appropriate for the expected term of the Company's employee stock options. The expected term of the employee stock options is calculated using the simplified method which takes into considered the contractual life and vesting terms of the options.

The Company determined the expected volatility assumption for options granted using the historical volatility of comparable public company's common stock. The Company will continue to monitor peer companies and other relevant factors used to measure expected volatility for future stock option grants, until such time that the Company's common stock has enough market history to use historical volatility.

The dividend yield assumption for options granted is based on the Company's history and expectation of dividend payouts. The Company has never declared or paid any cash dividends on its common stock. and the Company does not anticipate paying any cash dividends in the foreseeable future.

Management estimated the fair value of common stock based on recent sales to third parties. Forfeitures are recognized as incurred .

A summary of the Company's stock options activity and related information is as follows:

	Number of Shares	Weighted Average Exercise Price	Weighted average Remaining Contractual Term

Outstanding at December 31, 2018	465,418	$ 1.70	9.19
Granted	-	-	-
Exercised	-	-	-
Expiration/Cancelled	-	-	-
Outstanding at December 31, 2019	465,418	$ 1.70	9.19

Exercisable at December 31, 2019	182,918	$ 1.70	9.04
Exercisable at December 31, 2018	182,918	$ 1.70	9.04

Stock option expense for the years ended December 31, 2019 and 2018 was $0 and $294,828, respectively. The unrecognized stock option expense is $0 and $317,193, respectively.

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 6 - STOCKHOLDERS' DEFICIT (CONTINUED)

Warrants (Continued)

In 2017, the Company granted 207,000 warrants to various advisors exercisable into 207,000 shares of common stock. The granted warrants had an exercise price of $0.01 to $1.70 and expire in ten years. Of the warrants issued, 7,000 vest immediately, and 200,000 vest upon options being exercised under the 2017 Equity Incentive Plan at a ratio of one (1) warrant for every four (4) shares being issued. As of December 31, 2019 and 2018, it is not probable the warrants will vest and therefore no compensation expense has been recognized. The 7,000 warrant were valued using the Black-Scholes pricing model as indicated below:

	December 31, 2019	December 31, 2018

Expected Life (years)	10	10
Risk-free interest rate	0.95%	0.95%
Expected volatility	75%	75%
Annual dividend yield	0%	0%

The warrants were valued similar to the stock options disclosed above. During the years ended December 31, 2019 and 2018, the Company expensed $0 and $11,830 related to these warrants respectively.

	Number of Shares	Weighted Average Exercise Price	Weighted average Remaining Contractual Term

Outstanding at December 31, 2017	207,000	$ 1.70	9.50
Granted	-	-	-
Exercised	-	-	-
Expiration/Cancelled	-	-	-
Outstanding at December 31, 2018	207,000	$ 1.70	9.50

Exercisable at December 31, 2018	7,000	$ 0.07	9.50

XCRAFT ENTERPRISES, INC.

NOTES TO FINANCIAL STATEMENTS
FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

NOTE 7 - INCOME TAXES

The following table presents the current and deferred income tax provision for federal and state income taxes for years ended December 31, 2019 and 2018 (rounded to '000's):

	2019	2018

Income tax benefit attributable to:
Net loss	$ (801,350)	$ (78,582)
Valuation allowance	801,350	78,582
Net provision for income tax	$ -	$ -

The major components of the deferred taxes are as follows at December 31, 2019 and 2018 (rounded to '000's):

	2019	2018

Deferred tax asset attributable to:
Net operating loss carryover	$ 1,077,932	$ 276,582
Valuation allowance	(1,077,932)	(276,582)
Net deferred tax asset	$ -	$ -

Assets	2019	2018
Current assets
Cash	$ 33,392	$ 30,823
Accounts receivables	47,450	163,850
Inventory	62,816	62,816
Other current asset	283,048	340,133
Total current assets	426,706	597,622

Property and equipment, net	28,317	33,859
Intangible assets, net	85,187	70,462
Related party receivables	68,432	67,793
Other assets	3,051	3,050
Total assets	$ 611,692	$ 772,786

Liabilities and stockholders' deficit
Current liabilities
Accounts payables and accrued expenses	$ 341,835	$ 167,250
Deferred revenue	536,722	537,841
Line of credit	191,469	140,999
Note payable - current	22,092	22,092
Total current liabilities	1,092,119	868,182
Note payable - net of current	240,279	265,323
Total liabilities	1,332,397	1,133,505

Commitment and contingencies

Stockholders' Deficit
Class A voting stock	353	353
Class B voting stock	68	68
Additional paid in capital	2,283,668	1,835,930
Accumulated deficit	(3,004,794)	(2,197,070)
Total stockholders' deficit	(720,705)	(360,719)
Total liabilities and stockholders' deficit	$ 611,692	$ 772,786

	2019	2018
Revenues	$ 680,677	$ 1,051,970

Cost of sales	13,458	31,081

Gross profit	667,219	1,020,889

Operating Expenses:
General and administration	1,153,711	1,096,495
Sales and marketing	97,583	32,035
Research and development	163,215	143,539
Total operating expenses	1,414,509	1,272,069

Operating loss	(747,290)	(251,180)

Other (income)expenses:
Interest expense	43,134	5,654
Other expense	7,986	6,367
Gain on settlement	(9,314)	-
Other income	-	-
Total Other (income)expenses	60,434	12,021

Net loss	$ (807,724)	$ (263,201)

	Class A - Common		Class B - Common
	Shares	Amount	Shares	Amount	Additional Paid - in - Capital	Accumulated Deficit	Total Shares Deficit
Balance at 12/31/2017	3,526,250	$ 353	647,339	$ 65	$ 1,579,183	$ (1,933,869)	$ (354,268)
Common stock issued			32,097	3	294,828		294,831
Common stock issuance costs					(38,081)		(38,081)
Net loss						(263,201)	(263,201)
Balance at 12/31/2018	3,526,250	$ 353	679,436	$ 68	$ 1,835,930	$ (2,197,070)	$ (360,719)
Common stock issued			265,038	27	447,711		447,738
Net Loss						(807,724)	(807,724)
Balance at 12/31/2019	3,526,250	$ 353	944,474	$ 95	$ 2,283,641	$ (3,004,794)	$ (720,705)

	2019	2018
CASHFLOWS FROM OPERATING ACTIVITIES:
Net loss	$ (807,724)	$ (263,201)
Adjustments to reconcile net loss to net cash used in operations:
Depreciation	12,222	12,222
Amortization	6,390	6,390
Stock based compensation	-	294,828
Change in operating assets and liabilities
Accounts receivables	116,399	(163,850)
Inventory	-	(4,800)
Other current liabilities	-	(334,658)
Accounts payables	200,235	(75,199)
Deferred revenues	(1,119)	9,900
Net cash used in operating activities	(499,246)	(518,368)

CASHFLOWS FROM INVESTING ACTIVITIES:
Purchase of property and equipment	(6,679)	(6,356)
Sale of property and equipment	-	26,031
Purchase of intangible assets	(14,725)	(11,042)
Related party receivables	(639)	639
Net cash (used) / provided by investing activities	(22,044)	9,272

CASHFLOWS FROM FINANCING ACTIVITIES:
Proceeds (repayments) -line of credit	50,470	140,999
Repayment - notes payables	-	(7,183)
Proceeds from loan	-	237,133
Proceeds from sale of common stock	447,738	114,265
Offering costs	-	(38,081)
Net cash provided by financing activities	498,208	447,133

Change in cash and cash equivalents	2,569	(61,963)
Cash and cash equivalents, beginning of year	30,823	92,786
Cash and cash equivalents, end of year	$ 33,392	$ 30,823

Supplemental disclosure of cash flow information
Cash paid for interest	$ 43,134	$ 5,654